added nicer support for Xrdp

fixed some errors in Makefiles when installing

Makefile

@@ -19,9 +19,11 @@ base:
 
 nopam: base
 	make -C sesman nopam
+	make -C sesman tools
 
 kerberos: base
 	make -C sesman kerberos
+	make -C sesman tools
 
 clean:
 	make -C vnc clean
@@ -44,6 +46,6 @@ install:
 	make -C sesman install
 	make -C xup install
 	make -C docs install
-	install instfiles/pam.d/sesman /etc/pam.d/sesman
+	if [ -d /etc/pam.d ]; then install instfiles/pam.d/sesman /etc/pam.d/sesman; fi
 	install instfiles/xrdpstart.sh $(DESTDIR)/xrdpstart.sh
 	install instfiles/xrdp_control.sh $(DESTDIR)/xrdp_control.sh

sesman/Makefile

@@ -22,7 +22,11 @@ CC = gcc
 
 all: pam tools
 
-nopam: $(SESMANOBJ) verify_user.o
+nopam: no-pam tools
+
+kerberos: kerberos-base tools
+
+no-pam: $(SESMANOBJ) verify_user.o
 	$(CC) $(LDFLAGS) -o sesman $(SESMANOBJ) verify_user.o -ldl -lcrypt
 
 pam: $(SESMANOBJ) verify_user_pam.o
@@ -31,7 +35,7 @@ pam: $(SESMANOBJ) verify_user_pam.o
 pam_userpass: $(SESMANOBJ) verify_user_pam_userpass.o
 	$(CC) $(LDFLAGS) -o sesman $(SESMANOBJ) verify_user_pam_userpass.o -ldl -lpam -lpam_userpass
 
-kerberos: $(SESMANOBJ) verify_user_kerberos.o
+kerberos-base: $(SESMANOBJ) verify_user_kerberos.o
 	$(CC) $(LDFLAGS) -o sesman $(SESMANOBJ) verify_user_kerberos.o -ldl -lkrb5
 
 tools: $(SESRUNOBJ)

sesman/sesman.c

@@ -37,7 +37,7 @@ struct session_item g_session_items[100]; /* sesman.h */
 extern int g_session_count;
 #endif
 struct config_sesman g_cfg; /* config.h */
-int g_server_type = 0; /* Xvnc 0 Xrdp 10 */
+//int g_server_type = 0; /* Xvnc 0 Xrdp 10 */
 
 /**
  *
@@ -137,7 +137,7 @@ sesman_main_loop()
               in_uint16_be(in_s, code);
               if (code == 0 || code == 10) /* check username - password, */
               {                            /* start session */
-                g_server_type = code;
+                //g_server_type = code;
                 in_uint16_be(in_s, i);
                 in_uint8a(in_s, user, i);
                 user[i] = 0;
@@ -165,8 +165,18 @@ sesman_main_loop()
 		    if (1==access_login_allowed(user))
                     {
 		      log_message(LOG_LEVEL_INFO, "granted TS access to user %s", user);
-                      display = session_start(width, height, bpp, user, pass,
+		      if (0 == code)
-                                              data);
+		      {
+		        log_message(LOG_LEVEL_INFO, "starting Xvnc session...");
+                        display = session_start(width, height, bpp, user, pass,
+                                                data, SESMAN_SESSION_TYPE_XVNC);
+                      }
+                      else
+		      {
+		        log_message(LOG_LEVEL_INFO, "starting Xrdp session...");
+                        display = session_start(width, height, bpp, user, pass,
+                                                data, SESMAN_SESSION_TYPE_XRDP);
+                      }
 		    }
 		    else
                     {

sesman/session.c

@@ -27,7 +27,7 @@
 
 extern unsigned char g_fixedkey[8];
 extern struct config_sesman g_cfg; /* config.h */
-extern int g_server_type;
+//extern int g_server_type;
 #ifdef OLDSESSION
 extern struct session_item g_session_items[100]; /* sesman.h */
 #else
@@ -98,7 +98,7 @@ x_server_running(int display)
 /* returns 0 if error else the display number the session was started on */
 int DEFAULT_CC
 session_start(int width, int height, int bpp, char* username, char* password,
-              long data)
+              long data, unsigned char type)
 {
   int display;
   int pid;
@@ -206,19 +206,24 @@ session_start(int width, int height, int bpp, char* username, char* password,
       {
         env_set_user(username, passwd_file, display);
         env_check_password_file(passwd_file, password);
-        if (g_server_type == 0)
+        if (type == SESMAN_SESSION_TYPE_XVNC)
         {
           g_execlp11("Xvnc", "Xvnc", screen, "-geometry", geometry,
                      "-depth", depth, "-bs", "-rfbauth", passwd_file, 0);
         }
-        else if (g_server_type == 10)
+        else if (type == SESMAN_SESSION_TYPE_XRDP)
         {
           g_execlp11("Xrdp", "Xrdp", screen, "-geometry", geometry,
                      "-depth", depth, "-bs", 0, 0, 0);
         }
+	else
+        {
+          log_message(LOG_LEVEL_ALWAYS, "bad session type - user %s - pid %d", username, g_getpid());
+	  g_exit(1);
+        }
         /* should not get here */
         log_message(LOG_LEVEL_ALWAYS,"error doing execve for user %s - pid %d",username,g_getpid());
-        g_exit(0);
+        g_exit(1);
       }
       else /* parent */
       {
@@ -245,8 +250,16 @@ session_start(int width, int height, int bpp, char* username, char* password,
     g_session_items[display].connect_time=g_time1();
     g_session_items[display].disconnect_time=(time_t) 0;
     g_session_items[display].idle_time=(time_t) 0;
-    
+   
-    g_session_items[display].type=SESMAN_SESSION_TYPE_XVNC;
+    i/*if (type==0)
+    {
+      g_session_items[display].type=SESMAN_SESSION_TYPE_XVNC;
+    }
+    else
+    {
+      g_session_items[display].type=SESMAN_SESSION_TYPE_XRDP;
+    }*/
+    g_session_items[display].type=type;
     g_session_items[display].status=SESMAN_SESSION_STATUS_ACTIVE;
     
     g_session_count++;
@@ -263,7 +276,16 @@ session_start(int width, int height, int bpp, char* username, char* password,
     temp->item->disconnect_time=(time_t) 0;
     temp->item->idle_time=(time_t) 0;
 
-    temp->item->type=SESMAN_SESSION_TYPE_XVNC;
+/*    if (type==0)
+    {
+      temp->item->type=SESMAN_SESSION_TYPE_XVNC;
+    }
+    else
+    {
+      temp->item->type=SESMAN_SESSION_TYPE_XRDP;
+    }*/
+	    
+    temp->item->type=type;
     temp->item->status=SESMAN_SESSION_STATUS_ACTIVE;
     
     /*THREAD-FIX lock the chain*/

sesman/session.h

@@ -86,7 +86,7 @@ session_get_bydata(char* name, int width, int height, int bpp);
  */
 int DEFAULT_CC
 session_start(int width, int height, int bpp, char* username, char* password,
-              long data);
+              long data, unsigned char type);
 
 /**
  *