Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions

XML Module

• Overview of the XML architecture in TQt
• The TQt SAX2 classes
  • Introduction to SAX2
  • Features
  • Namespace support via features
    • Summary
  • Properties
  • Further reading
• The TQt DOM classes
  • Introduction to DOM
  • Further reading
• An introduction to namespaces
  • Conventions used in TQt XML documentation

Overview of the XML architecture in TQt

The XML module provides a well-formed XML parser using the SAX2 (Simple API for XML) interface plus an implementation of the DOM Level 2 (Document Object Model).

SAX is an event-based standard interface for XML parsers. The TQt interface follows the design of the SAX2 Java implementation. Its naming scheme was adapted to fit the TQt naming conventions. Details on SAX2 can be found at http://www.saxproject.org.

Support for SAX2 filters and the reader factory are under development. The TQt implementation does not include the SAX1 compatibility classes present in the Java interface.

For an introduction to TQt's SAX2 classes see "The TQt SAX2 classes".

DOM Level 2 is a W3C Recommendation for XML interfaces that maps the constituents of an XML document to a tree structure. Details and the specification of DOM Level 2 can be found at http://www.w3.org/DOM/. More information about the DOM classes in TQt is provided in the TQt DOM classes.

TQt provides the following XML related classes:

The TQt SAX2 classes

Introduction to SAX2

The SAX2 interface is an event-driven mechanism to provide the user with document information. An "event" in this context means something reported by the parser, for example, it has encountered a start tag, or an end tag, etc.

To make it less abstract consider the following example:

 
<quote>A quotation.</quote>

Whilst reading (a SAX2 parser is usually referred to as "reader") the above document three events would be triggered:

1. A start tag occurs (<quote>).
2. Character data (i.e. text) is found, "A quotation.".
3. An end tag is parsed (</quote>).

Each time such an event occurs the parser reports it; you can set up event handlers to respond to these events.

Whilst this is a fast and simple approach to read XML documents, manipulation is difficult because data is not stored, simply handled and discarded serially. The DOM interface reads in and stores the whole document in a tree structure; this takes more memory, but makes it easier to manipulate the document's structure..

The TQt XML module provides an abstract class, TQXmlReader, that defines the interface for potential SAX2 readers. TQt includes a reader implementation, TQXmlSimpleReader, that is easy to adapt through subclassing.

The reader reports parsing events through special handler classes:

These classes are abstract classes describing the interface. The TQXmlDefaultHandler class provides a "do nothing" default implementation for all of them. Therefore users only need to overload the TQXmlDefaultHandler functions they are interested in.

To read input XML data a special class TQXmlInputSource is used.

Apart from those already mentioned, the following SAX2 support classes provide additional useful functionality:

Features

The behaviour of an XML reader depends on its support for certain optional features. For example, a reader may have the feature "report attributes used for namespace declarations and prefixes along with the local name of a tag". Like every other feature this has a unique name represented by a URI: it is called http://xml.org/sax/features/namespace-prefixes.

The TQt SAX2 implementation can report whether the reader has particular functionality using the TQXmlReader::hasFeature() function. Available features can be tested with TQXmlReader::feature(), and switched on or off using TQXmlReader::setFeature().

Consider the example

 
<document xmlns:book = 'http://trolltech.com/fnord/book/'
          xmlns      = 'http://trolltech.com/fnord/' >

Other features include http://xml.org/sax/features/namespace (namespace processing, implies http://xml.org/sax/features/namespace-prefixes) and http://xml.org/sax/features/validation (the ability to report validation errors).

Whilst SAX2 leaves it to the user to define and implement whatever features are retquired, support for http://xml.org/sax/features/namespace (and thus http://xml.org/sax/features/namespace-prefixes) is mandantory. The TQXmlSimpleReader implementation of TQXmlReader, supports them, and can do namespace processing.

TQXmlSimpleReader is not validating, so it does not support http://xml.org/sax/features/validation.

Namespace support via features

As we have seen in the previous section we can configure the behavior of the reader when it comes to namespace processing. This is done by setting and unsetting the http://xml.org/sax/features/namespaces and http://xml.org/sax/features/namespace-prefixes features.

They influence the reporting behavior in the following way:

1. Namespace prefixes and local parts of elements and attributes can be reported.
2. The qualified names of elements and attributes are reported.
3. TQXmlContentHandler::startPrefixMapping() and TQXmlContentHandler::endPrefixMapping() are called by the reader.
4. Attributes that declare namespaces (i.e. the attribute xmlns and attributes starting with xmlns:) are reported.

Consider the following element:

<author xmlns:fnord = 'http://trolltech.com/fnord/'
             title="Ms" 
             fnord:title="Goddess" 
             name="Eris Kallisti"/>

The http://xml.org/sax/features/namespaces feature is responsible for reporting local names, namespace prefixes and URIs. With http://xml.org/sax/features/namespaces set to TRUE the parser will report title as the local name of the fnord:title attribute, fnord being the namespace prefix and http://trolltech.com/fnord/ as the namespace URI. When http://xml.org/sax/features/namespaces is FALSE none of them are reported.

In the current implementation the TQt XML classes follow the definition that the prefix xmlns itself isn't associated with any namespace at all (see http://www.w3.org/TR/1999/REC-xml-names-19990114/#ns-using). Therefore even with http://xml.org/sax/features/namespaces and http://xml.org/sax/features/namespace-prefixes both set to TRUE the reader won't return either a local name, a namespace prefix or a namespace URI for xmlns:fnord.

This might be changed in the future following the W3C suggestion http://www.w3.org/2000/xmlns/ to associate xmlns with the namespace http://www.w3.org/2000/xmlns.

As the SAX2 standard suggests, TQXmlSimpleReader defaults to having http://xml.org/sax/features/namespaces set to TRUE and http://xml.org/sax/features/namespace-prefixes set to FALSE. When changing this behavior using TQXmlSimpleReader::setFeature() note that the combination of both features set to FALSE is illegal.

For a practical demonstration of how the two features affect the output of the reader run the tagreader with features example.

Summary

TQXmlSimpleReader implements the following behavior:

^* The behavior of these entries is not specified by SAX.

Properties

Properties are a more general concept. They have a unique name, represented as an URI, but their value is void*. Thus nearly anything can be used as a property value. This concept involves some danger, though: there is no means of ensuring type-safety; the user must take care that they pass the right type. Properties are useful if a reader supports special handler classes.

The URIs used for features and properties often look like URLs, e.g. http://xml.org/sax/features/namespace. This does not mean that the data retquired is at this address. It is simply a way of defining unique names.

Anyone can define and use new SAX2 properties for their readers. Property support is not mandatory.

To set or query properties the following functions are provided: TQXmlReader::setProperty(), TQXmlReader::property() and TQXmlReader::hasProperty().

Further reading

More information about XML (e.g. namespaces) can be found in the introduction to the TQt XML module.

The TQt DOM classes

Introduction to DOM

DOM provides an interface to access and change the content and structure of an XML file. It makes a hierarchical view of the document (a tree view). Thus -- in contrast to the SAX2 interface -- an object model of the document is resident in memory after parsing which makes manipulation easy.

All DOM nodes in the document tree are subclasses of TQDomNode. The document itself is represented as a TQDomDocument object.

Here are the available node classes and their potential child classes:

• TQDomDocument: Possible children are
  • TQDomElement (at most one)
  • TQDomProcessingInstruction
  • TQDomComment
  • TQDomDocumentType
• TQDomDocumentFragment: Possible children are
  • TQDomElement
  • TQDomProcessingInstruction
  • TQDomComment
  • TQDomText
  • TQDomCDATASection
  • TQDomEntityReference
• TQDomDocumentType: No children
• TQDomEntityReference: Possible children are
  • TQDomElement
  • TQDomProcessingInstruction
  • TQDomComment
  • TQDomText
  • TQDomCDATASection
  • TQDomEntityReference
• TQDomElement: Possible children are
  • TQDomElement
  • TQDomText
  • TQDomComment
  • TQDomProcessingInstruction
  • TQDomCDATASection
  • TQDomEntityReference
• TQDomAttr: Possible children are
  • TQDomText
  • TQDomEntityReference
• TQDomProcessingInstruction: No children
• TQDomComment: No children
• TQDomText: No children
• TQDomCDATASection: No children
• TQDomEntity: Possible children are
  • TQDomElement
  • TQDomProcessingInstruction
  • TQDomComment
  • TQDomText
  • TQDomCDATASection
  • TQDomEntityReference
• TQDomNotation: No children

With TQDomNodeList and TQDomNamedNodeMap two collection classes are provided: TQDomNodeList is a list of nodes, and TQDomNamedNodeMap is used to handle unordered sets of nodes (often used for attributes).

The TQDomImplementation class allows the user to query features of the DOM implementation.

Further reading

To get started please refer to the TQDomDocument documentation.

An introduction to namespaces

Parts of the TQt XML module documentation assume that you are familiar with XML namespaces. Here we present a brief introduction; skip to TQt XML documentation conventions if you already know this material.

Namespaces are a concept introduced into XML to allow a more modular design. With their help data processing software can easily resolve naming conflicts in XML documents.

Consider the following example:

<document>
<book>
  <title>Practical XML</title>
  <author title="Ms" name="Eris Kallisti"/>
  <chapter>
    <title>A Namespace Called fnord</title>
  </chapter>
</book>
</document>

Here we find three different uses of the name title. If you wish to process this document you will encounter problems because each of the titles should be displayed in a different manner -- even though they have the same name.

The solution would be to have some means of identifying the first occurrence of title as the title of a book, i.e. to use the title element of a book namespace to distinguish it from, for example, the chapter title, e.g.:

<book:title>Practical XML</book:title>

book in this case is a prefix denoting the namespace.

Before we can apply a namespace to element or attribute names we must declare it.

Namespaces are URIs like http://trolltech.com/fnord/book/. This does not mean that data must be available at this address; the URI is simply used to provide a unique name.

We declare namespaces in the same way as attributes; strictly speaking they are attributes. To make for example http://trolltech.com/fnord/ the document's default XML namespace xmlns we write

xmlns="http://trolltech.com/fnord/"

To distinguish the http://trolltech.com/fnord/book/ namespace from the default, we must supply it with a prefix:

xmlns:book="http://trolltech.com/fnord/book/"

A namespace that is declared like this can be applied to element and attribute names by prepending the appropriate prefix and a ":" delimiter. We have already seen this with the book:title element.

Element names without a prefix belong to the default namespace. This rule does not apply to attributes: an attribute without a prefix does not belong to any of the declared XML namespaces at all. Attributes always belong to the "traditional" namespace of the element in which they appear. A "traditional" namespace is not an XML namespace, it simply means that all attribute names belonging to one element must be different. Later we will see how to assign an XML namespace to an attribute.

Due to the fact that attributes without prefixes are not in any XML namespace there is no collision between the attribute title (that belongs to the author element) and for example the title element within a chapter.

Let's clarify this with an example:

<document xmlns:book = 'http://trolltech.com/fnord/book/'
          xmlns      = 'http://trolltech.com/fnord/' >
<book>
  <book:title>Practical XML</book:title>
  <book:author xmlns:fnord = 'http://trolltech.com/fnord/'
               title="Ms"
               fnord:title="Goddess"
               name="Eris Kallisti"/>
  <chapter>
    <title>A Namespace Called fnord</title>
  </chapter>
</book>
</document>

Within the document element we have two namespaces declared. The default namespace http://trolltech.com/fnord/ applies to the book element, the chapter element, the appropriate title element and of course to document itself.

The book:author and book:title elements belong to the namespace with the URI http://trolltech.com/fnord/book/.

The two book:author attributes title and name have no XML namespace assigned. They are only members of the "traditional" namespace of the element book:author, meaning that for example two title attributes in book:author are forbidden.

In the above example we circumvent the last rule by adding a title attribute from the http://trolltech.com/fnord/ namespace to book:author: the fnord:title comes from the namespace with the prefix fnord that is declared in the book:author element.

Clearly the fnord namespace has the same namespace URI as the default namespace. So why didn't we simply use the default namespace we'd already declared? The answer is tquite complex:

• attributes without a prefix don't belong to any XML namespace at all, not even to the default namespace;
• additionally omitting the prefix would lead to a title-title clash;
• writing it as xmlns:title would declare a new namespace with the prefix title instead of applying the default xmlns namespace.

With the TQt XML classes elements and attributes can be accessed in two ways: either by refering to their qualified names consisting of the namespace prefix and the "real" name (or local name) or by the combination of local name and namespace URI.

More information on XML namespaces can be found at http://www.w3.org/TR/REC-xml-names/.

Conventions used in TQt XML documentation

The following terms are used to distinguish the parts of names within the context of namespaces:

• The qualified name is the name as it appears in the document. (In the above example book:title is a qualified name.)
• A namespace prefix in a qualified name is the part to the left of the ":". (book is the namespace prefix in book:title.)
• The local part of a name (also refered to as the local name) appears to the right of the ":". (Thus title is the local part of book:title.)
• The namespace URI ("Uniform Resource Identifier") is a unique identifier for a namespace. It looks like a URL (e.g. http://trolltech.com/fnord/ ) but does not retquire data to be accessible by the given protocol at the named address.

Elements without a ":" (like chapter in the example) do not have a namespace prefix. In this case the local part and the qualified name are identical (i.e. chapter).