DEB build scripts: major update aimed at simplifying the use for

non-root users.

Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>

debian/_buildscripts/local/scripts/00_extradeps.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/01_base_01.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/02_base_02.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/03_base_03.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/04_applications_01.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/05_applications_02.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/06_applications_03.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/07_applications_04.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/08_applications_05.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/09_others_01.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/10_others_02.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-. ./_build_set_common.sh
+. ./internals/_build_set_common.sh
 
 #----------------------------
 set_log_start

debian/_buildscripts/local/scripts/99_build_TDE.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Load common code and initialization
-. ./_build_common.sh
+. ./internals/_build_common.sh
 init_common
 
 _BUILDALL_TIMER=2

debian/_buildscripts/local/scripts/README.txt

@@ -13,33 +13,34 @@ A) Environment preparation
    - this guide has been prepared based on a clean debian testing netinstall system without any other DE.
      It should work for other debian/ubuntu distros as well, but eventually you may run into small differences
      here and there.
-   - you can change folder names below, as long as you update the "build_config.sh" file accordingly.
+   - you can change folder names below, as long as you update the "_config.sh" file accordingly.
 
-1) Install following packages: bc, cdbs, git, links2, pbuilder
+1) Install following packages: bc, cdbs, git, links2, pbuilder, rsync and required dependencies.
+   NOTE: sudo should already be installed. If not, install sudo as well.
 
-2) Create a base folder for TDE, hereafter referred to as TDE_SRC (for example $HOME/tde_src)
+2) Create a base folder for TDE, hereafter referred to as TDE_DIR (for example $HOME/tde_src)
 
 3) Create the following folders [ see NOTE at point 0) about folder names ]
-   - in TDE_SRC: 0_logs : contains log files for repo update and global builds (more on this later)
+   - in TDE_DIR: 0_logs : contains log files for repo update and global builds (more on this later)
                  1_git  : contains the git repo clones and build hook scripts
                  2_build: folder used for build preparation and for local builds
                  3_repo : local repo for package installation (to be configured in /etc/apt/sources.list)
                  buildscripts: contains a local copy of the build scripts, which can be modified as required
-   - in TDE_SRC/1_git: 
+   - in TDE_DIR/1_git: 
                  edeps  : contains extra dependency modules necessary to build TDE
                  hooks  : contains build hook scripts to execute ad-hoc code before and after the building process.
                           Mainly used to apply patches automatically during the building process
                           
 4) Clone TDE git repositories and extra dependency modules:
    - TDE main repo
-     cd "TDE_SRC/1_git"
+     cd "TDE_DIR/1_git"
      git clone https://mirror.git.trinitydesktop.org/gitea/TDE/tde
      cd tde
      git submodule init -- scripts
      git submodule update -- scripts
      ./scripts/switch_all_submodules_to_head_and_clean anonymous
    - TDE packaging repo 
-     cd "TDE_SRC/1_git"
+     cd "TDE_DIR/1_git"
      git clone https://mirror.git.trinitydesktop.org/gitea/TDE/tde-packaging
    - extra dependency packages
      using a browser, download the source code for extra dependency modules from Slavek's PPA
@@ -52,15 +53,16 @@ A) Environment preparation
        the button to update. You should get a list of 10-15 modules, depending on the distro.
      * Click on one module at a time, it will expand (or open another page) and show a list of .deb and other files.
      * Save those files (exclude .deb files. Only .orig.tar.xz, .dsc, .debian.tar.xz are required) and store
-       them to TDE_SRC/1_git/edeps/<MODULE NAME> folder (one folder per module).
+       them to TDE_DIR/1_git/edeps/<MODULE NAME> folder (one folder per module).
 
-5) Add your user to the sudoers group (not required if you are root)
+5) Add your user to the sudo group (not required if you are root)
      su -c "adduser <username> sudo"
+   Optionally, consider extending your sudo timeout interval to avoid having to type your password too often (this
+   could be quite painful especially during long builds, which would not be able to complete if unattended).
    Logout and login again to make sure the setting is applied.
 
-6) Copy the files from "TDE_SRC/1_git/tde-packaging/debian/_buildscripts/local/scripts/additional files" folder
+6) Copy the files from "TDE_DIR/1_git/tde-packaging/debian/_buildscripts/local/buildscripts/additional files" folder
    to the respectivily named folders.
-   - make sure the files in "/root/.pbuilder/hooks" are executable
 
 7) Create pbuilder base package with the command:
      sudo pbuilder --create
@@ -68,11 +70,12 @@ A) Environment preparation
      sudo DIST=<target distro> ARCH=<target architecture> pbuilder --create
    
 8) Setup the build scripts locally:
-  - copy build scripts from "TDE_SRC/1_git/tde-packaging/debian/_buildscripts/local/scripts" to "TDE_SRC/buildscripts"
+  - copy build scripts from "TDE_DIR/1_git/tde-packaging/debian/_buildscripts/local/buildscripts" to "TDE_DIR/buildscripts"
-  - cd "TDE_SRC/buildscripts"
+    and make sure all shell scripts are executable
-  - cp _build_config_template.sh build_config.sh
+  - cd "TDE_DIR/buildscripts"
-  - edit "build_config.sh" to set your preferences and check that the various folder names match the structure on your disk.
+  - cp ./internals/_config_template.sh _config.sh
-    Make sure to set the variable TDE_SRC to the correct path and the variables DISTRO, DISTRO_NAME and ARCHITECTURE to
+  - edit "_config.sh" to set your preferences and check that the various folder names match the structure on your disk.
+    Make sure to set the variable TDE_DIR to the correct path and the variables DISTRO, DISTRO_NAME and ARCHITECTURE to
     match the distro and architecture you want to build for.
 
 
@@ -81,52 +84,46 @@ A) Environment preparation
 B) Notes about scripts
 ----------------------
 1) * Notes *
-Modules are built using the build_module.sh script. After the build is completed, the installation .deb files are located in TDE_SRC/2_build/debs/<MODULE NAME>/ and the source code and build reports in TDE_SRC/2_build/debs/<MODULE NAME>/src/
+Modules are built using the build_module.sh script. After the build is completed, the installation .deb files are located in TDE_DIR/2_build/debs/<MODULE NAME>/ and the source code and build reports in TDE_DIR/2_build/debs/<MODULE NAME>/src/
 
-The source code can be either the git repo or a local copy in TDE_SRC/2_build/build/<MODULE NAME>.
+The source code can be either the git repo or a local copy in TDE_DIR/2_build/build/<MODULE NAME>.
 A module can be built in a clean chroot environment using pbuilder (default option) or locally using dpkg-buildpackage (useful for quick debugging/developing).
 When using pbuilder, a hook can be used to invoke a shell when the build fails.
 
 Build logs are automatically stored to files, but can also be displayed during the build process.
-The default location of a module build log is TDE_SRC/2_build/debs/<MODULE NAME>/src/__build__.log
+The default location of a module build log is TDE_DIR/2_build/debs/<MODULE NAME>/src/__build__.log
 
-When building sets of modules or the whole TDE, a global build summary is automatically stored to TDE_SRC/0_logs/build_result.log to quickly check what built and what failed. It is recommended to delete that file before starting a new TDE build (if not, build results will be appended at the end of the file).
+When building sets of modules or the whole TDE, a global build summary is automatically stored to TDE_DIR/0_logs/build_result.log to quickly check what built and what failed. It is recommended to delete that file before starting a new TDE build (if not, build results will be appended at the end of the file).
 
 
 2) * Scripts description *
+- scripts in 'internals' folder
+  Scripts used intenally by other scripts. No need for invoking these directly.
+
 - update_git_repository.sh:
   Scripts used to update the local clone of the git repositories.
   Usage:
     update_git_repository.sh
 
-- build_module.sh: build a single module
+- build_module.sh
+  Build a single module.
   Usage:
     build_module.sh [options] module_name
   Options:
     -g  (Git)         : build from git repo sources. If missing, build from the local copy in build folder.
     -l  (Local)       : build the module locally. If missing, build in a clean chroot environment
     -sl (Show Log)    : output the building logs to terminal while the build is ongoing
-    -lr (Log Result)  : log (append) build result (OK, FAILED) to TDE_SRC/0_logs/build_result.log file
+    -lr (Log Result)  : log (append) build result (OK, FAILED) to TDE_DIR/0_logs/build_result.log file
     -sh (Shell Hook)  : use a shell hook for failing builds, only valid if building using pbuilder (clean chroot environment)
     -po (Prepare Only): only prepare the source folder but do not build the module. Useful to prepare the source code before
                         doing local changes/development. The module can then be built from the modified local folder
     -d  (Debug)       : enable debug symbols if possible (debian/rules file must contain "RelWithDebInfo" for this to work)
     -ip (Internal Pbuilder): build using internal pbuilder mode (experimental)
   
-- _build_config_template.sh
-Template file for building configuration. Will be copied into TDE_SRC/build_config.sh upon first execution, if not already
-done when the environment was set up.
-
-- _build_common.sh
-Utility script containing common code. No need for invoking this directly.
-
-- _build_set_common.sh
-Utility script used to build sets of modules. No need for invoking this directly.
-
 - <dd>_<set_name>.sh
   A number of scripts used to build sets of modules. Each script builds an individual set.
   Modules are built from the git sources and the build result is automatically appended to 
-TDE_SRC/0_logs/build_result.log.
+  TDE_DIR/0_logs/build_result.log.
   Usage:
     <dd>_<set_name>.sh [options] set_name
   Options:
@@ -141,7 +138,7 @@ The sets are logically grouped as "base system", "applications" and "others"
   92_build_applications.sh                    : all TDE applications in 04_application_01.sh - 08_application_05.sh
   93_build_others.sh                          : all modules in 09_others_01.sh - 10_others_02.sh
 
-- build_TDE.sh
+- 99_build_TDE.sh
   Script used to build the whole TDE at once. Calls the dd_setname.sh set scripts in order.
   Usage:
     build_TDE.sh [options]
@@ -149,11 +146,11 @@ Script used to build the whole TDE at once. Calls the dd_setname.sh set scripts
     -s N: if specified, skip first N sets from the list of sets
     
 - create_repo.sh
-Creates a local repository from the .deb files currently stored in TDE_SRC/2_build/debs. This repo can be used as installation repository, just add the following lines to /etc/apt/sources.list
+  Creates a local repository from the .deb files currently stored in TDE_DIR/2_build/debs. 
-  # --- LOCAL TDE REPOSITORY ---
+  Usage:
-  deb [arch=<YOUR ARCH> trusted=yes] file:TDE_SRC/3_repo <YOUR DISTRO> main
+    create_repo.sh [options]
-  For example:
+  Options:
-  deb [arch=amd64 trusted=yes] file:/home/tde_src/3_repo/ buster main 
+    -b (Backup) : create a backup of the existing repository in TDE_DIR/CFG_REPO_DIR.backup
 
   
 3) * Building hooks *
@@ -161,7 +158,7 @@ Hooks are available to execute ad-hoc code before and after the build process. F
 There are two type of hooks: 
 - pre_build : applied before switching the module to quilt format and build
 - post_build: applied after the build (dpkg-buildpackage or pbuilder) has terminated 
-To use a hook, create an executable script (pre_build.sh and/or post_build.sh) in the TDE_SRC/1_git/hooks/<MODULE NAME> folder. The scripts are executed in the build_module.sh environment, so have access to all the variables defined in that file. See the files in the "hook examples" folder for real usage samples.
+To use a hook, create an executable script (pre_build.sh and/or post_build.sh) in the TDE_DIR/1_git/hooks/<MODULE NAME> folder. The scripts are executed in the build_module.sh environment, so have access to all the variables defined in that file. See the files in the "hook examples" folder for real usage samples.
 
 
 
@@ -169,36 +166,42 @@ To use a hook, create an executable script (pre_build.sh and/or post_build.sh) i
 C) How to use the scripts
 -------------------------
 1) Follow the steps in section "A) Environment preparation" (only required the first time).
-2) cd "TDE_SRC/buildscripts"
+2) cd "TDE_DIR/buildscripts"
 3) Update to latest git repository using
-   ./update_git_repository.sh
+   ./update_repositories.sh
-   Wait until "Update completed" is printed out. Check log in TDE_SRC/0_logs/ if you wish.
+   Wait until "Update completed" is printed out. Check log in TDE_DIR/0_logs/ if you wish.
 4) Run "sudo pbuilder update" at the beginning of the day to update the base package to the latest version. This will speed up
    the process when building several modules in sequence.
-5) Build modules as per your needs. 
+5) Build modules as per your needs. You don't need to use "sudo" directly since the scripts will do that automatically if
-   - If you are not root, you need to use sudo in front of each command.
+   required. Just type your sudo password when prompted to do so.
+6) Create a local repository from the packages you have just built, to be used as installation repository. 
+   Add the following lines to /etc/apt/sources.list and follow the usual way to install TDE.
+		 # --- LOCAL TDE REPOSITORY ---
+		 deb [arch=<YOUR ARCH> trusted=yes] file:TDE_DIR/3_repo <YOUR DISTRO> main
+	 For example:
+		 deb [arch=amd64 trusted=yes] file:/home/tde_src/3_repo buster main 
+  
   
 Examples of real usage:
 
-4.1) build a single module
+1) build a single module
-   - [sudo] ./build_module.sh -g -sl "dependencies/libr"       -> build libr package. This is a good test to check
+   - ./build_module.sh -g -sl "dependencies/libr"       -> build libr package. This is a good test to check
                                                            whether everything is working fine
-   - [sudo] ./build_module.sh -g "tdelibs"       -> build "tdelibs" from git sources in a clean chroot environment
+   - ./build_module.sh -g "tdelibs"       -> build "tdelibs" from git sources in a clean chroot environment
-   - [sudo] ./build_module.sh -g -l -sl "applications/amarok"  -> build "amarok" locally from git sources and 
+   - ./build_module.sh -g -l -sl "applications/amarok"  -> build "amarok" locally from git sources and 
                                                            display building logs during building
-   - [sudo] ./build_module.sh -sh -lr "tdebase"  -> build "tdebase" from the local sources (in TDE_SRC/2_build/build/tdebase)
+   - ./build_module.sh -sh -lr "tdebase"  -> build "tdebase" from the local sources (in TDE_DIR/2_build/build/tdebase)
                                              in a clean chroot environment and launch a shell in case of building failure.
-                                                    Append the build result (OK, FAILED) to TDE_SRC/scripts/logs/build_result.log
+                                             Append the build result (OK, FAILED) to TDE_DIR/scripts/logs/build_result.log
-   - [sudo] ./build_module.sh -g -po "tdelibs"   -> prepare "tdelibs" for building from git sources. Source code will be available
+   - ./build_module.sh -g -po "tdelibs"   -> prepare "tdelibs" for building from git sources. Source code will be available
-                                                    in TDE_SRC/2_build/build/tdelibs. After you have made changes to the source and
+                                             in TDE_DIR/2_build/build/tdelibs. After you have made changes to the source and
                                              want to build the modified package, run './build_module.sh "tdelibs"'
                                           
-4.2) build a single set
+2) build a single set
-  (optional) delete the TDE_SRC/0_logs/build_result.log file
+  (optional) delete the TDE_DIR/0_logs/build_result.log file
-  [sudo] ./01_base_01.sh      : build this set. 
+  ./01_base_01.sh      : build this set. 
-  [sudo] ./03_base_03.sh -s 3 : build this set but skip the first 3 modules of the set.
+  ./03_base_03.sh -s 3 : build this set but skip the first 3 modules of the set.
-
-4.3) build all TDE
-  [sudo] ./build_TDE.sh      : build all TDE
-  [sudo] ./build_TDE.sh -s 4 : build all TDE, but skip the first 4 sets
 
+3) build all TDE
+  ./99_build_TDE.sh       : build all TDE
+  ./99_build_TDE.sh -s 4  : build all TDE, but skip the first 4 sets

debian/_buildscripts/local/scripts/additional files/etc/pbuilderrc

@@ -1,53 +1,179 @@
-# this is your configuration file for pbuilder.
+#!/bin/bash
-# the file in /usr/share/pbuilder/pbuilderrc is the default template.
+
-# /etc/pbuilderrc is the one meant for editing.
+# general options
-#
+BUILDPLACE="/var/cache/pbuilder/build/"
-# read pbuilderrc.5 document for notes on specific options.
-
-BASETGZ=/var/cache/pbuilder/base.tgz
-BUILDPLACE=/var/cache/pbuilder/build/
 USEPROC=yes
 USEDEVPTS=yes
 USEDEVFS=no
-BUILDRESULT=/var/cache/pbuilder/result/
+
+# the username and ID used by pbuilder, inside chroot. Needs fakeroot, really
+BUILDUSERID=1234
+BUILDUSERNAME=pbuilder
 
 # make debconf not interact with user
 export DEBIAN_FRONTEND="noninteractive"
 DEBEMAIL=""
+
 # for pbuilder debuild (sudo -E keeps the environment as-is)
 BUILDSOURCEROOTCMD="fakeroot"
 PBUILDERROOTCMD="sudo -E"
 
-# command to satisfy build-dependencies; the default is an internal shell
+# this is necessary for running 'apt-ftparchive' in a hook script if required
-# implementation which is relatively slow; there are two alternate
+EXTRAPACKAGES="$EXTRAPACKAGES apt-utils"
-# implementations, the "experimental" implementation,
-# "pbuilder-satisfydepends-experimental", which might be useful to pull
-# packages from experimental or from repositories with a low APT Pin Priority,
-# and the "aptitude" implementation, which will resolve build-dependencies and
-# build-conflicts with aptitude which helps dealing with complex cases but does
-# not support unsigned APT repositories
-PBUILDERSATISFYDEPENDSCMD="/usr/lib/pbuilder/pbuilder-satisfydepends"
-
-#Command-line option passed on to dpkg-buildpackage.
-DEBBUILDOPTS=""
 
 #APT configuration files directory
 APTCONFDIR=""
-# the username and ID used by pbuilder, inside chroot. Needs fakeroot, really
-BUILDUSERID=1234
-BUILDUSERNAME=pbuilder
-
-# Set the debootstrap variant to 'buildd' type.
-DEBOOTSTRAPOPTS[0]='--variant=buildd'
 
-# Set the PATH I am going to use inside pbuilder: default is "/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin"
+# Set the PATH to be used inside pbuilder
 export PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin"
-
+# Shell to be used inside pbuilder by commands like 'su'
-# SHELL variable is used inside pbuilder by commands like 'su'; and they need sane values
 export SHELL=/bin/bash
 
-# The name of debootstrap command.
+# default PKGNAME_LOGFILE
-DEBOOTSTRAP="debootstrap"
+PKGNAME_LOGFILE="__build__.log"
+
+#-- get desired distribution and architecture
+if [ "$DIST" = "" ]; then
+	DIST=$(lsb_release -cs)
+fi
+DISTRIBUTION=$DIST
+if [ "$ARCH" = "" ]; then
+  ARCH=$(dpkg --print-architecture)
+fi
+ARCHITECTURE=$ARCH
+
+if [ -n "$T" ]; then
+  if [ "${T##*-}" = "vm" ]; then
+    BUILD_VM="qemu"
+    T=${T%-vm}
+  fi
+  if [ "${T#*@}" = "$T" ]; then
+    DISTRIBUTION=${T%-*}
+    ARCHITECTURE=${T##*-}
+  else
+    DISTRIBUTION=${T%@*}
+    ARCHITECTURE=${T##*@}
+  fi
+  if [ "${DISTRIBUTION##*-}" = "backports" ]; then
+    BACKPORTS="yes"
+    DISTRIBUTION=${DISTRIBUTION%-backports}
+  fi
+fi
+
+BASETGZ="/var/cache/pbuilder/base-$DIST@$ARCH.tgz"
+
+#-- select apt components
+case "$DISTRIBUTION" in
+    sid|buster|stretch|jessie|wheezy|squeeze|lenny|etch|sarge)
+        COMPONENTS="main contrib non-free"
+        ;;
+
+    ceres|beowulf|ascii)
+        COMPONENTS="main"
+        DEBOOTSTRAPOPTS=(--variant=buildd --no-check-gpg)
+        EXTRAPACKAGES="$EXTRAPACKAGES devuan-keyring"
+        ;;
+
+    bionic|artful|zesty|yakkety|xenial|wily|vivid|utopic|trusty|saucy|raring|quantal|precise|oneiric|natty|maverick|lucid)
+        COMPONENTS="main restricted universe multiverse"
+        DEBOOTSTRAPOPTS=(--variant=buildd)
+        ;;
+
+    raspbian-jessie|raspbian-wheezy)
+        COMPONENTS="main contrib non-free"
+        DEBOOTSTRAPOPTS=(--variant=buildd --no-check-gpg)
+        ;;
+esac
+EXTRAPACKAGES="$EXTRAPACKAGES fakeroot apt-transport-https ca-certificates"
+
+#-- select base apt sources
+case "$DISTRIBUTION" in
+    sid|buster|stretch|jessie|wheezy)
+        MIRRORSITE=http://deb.debian.org/debian
+        ;;
+
+    squeeze|lenny|etch|sarge)
+        MIRRORSITE=http://archive.debian.org/debian
+        OTHERMIRROR="#deb http://archive.debian.org/backports.org $DISTRIBUTION-backports main contrib non-free"
+        ;;
+
+    ceres|beowulf|ascii)
+        MIRRORSITE=http://auto.mirror.devuan.org/merged
+        ;;
+
+    bionic|artful|zesty|yakkety|wily|vivid|trusty|precise)
+        if [ "$ARCHITECTURE" = "amd64" ] || [ "$ARCHITECTURE" = "i386" ]; then
+            MIRRORSITE=http://archive.ubuntu.com/ubuntu
+        else
+            MIRRORSITE=http://ports.ubuntu.com
+        fi
+        ;;
+
+    xenial)
+        if [ "$ARCHITECTURE" = "amd64" ] || [ "$ARCHITECTURE" = "i386" ]; then
+            MIRRORSITE=http://archive.ubuntu.com/ubuntu
+        else
+            MIRRORSITE=http://ports.ubuntu.com
+        fi
+        OTHERMIRROR="deb $MIRRORSITE $DISTRIBUTION-updates $COMPONENTS"
+        ;;
+
+    utopic|saucy|raring|quantal|oneiric|natty|maverick|lucid)
+        MIRRORSITE=http://old-releases.ubuntu.com/ubuntu
+        ;;
+
+    raspbian-jessie|raspbian-wheezy)
+        MIRRORSITE=http://ftp.fi.muni.cz/pub/linux/raspbian/raspbian
+        ;;
+esac
+
+if [ -n "${ARCH}" ]; then
+    NAME="$NAME-$ARCH"
+    DEBOOTSTRAPOPTS=("--arch" "$ARCH" "${DEBOOTSTRAPOPTS[@]}")
+fi
+
+BUILDRESULT="/var/cache/pbuilder/$DISTRIBUTION/result/"
+
+APTCACHE="/var/cache/pbuilder/aptcache/$DISTRIBUTION/"
+if [ -n "$APTCACHE" ] && [ ! -d "$APTCACHE" ]; then
+  mkdir $APTCACHE
+fi
+if [ -z "$(stat -L --print "%d\n" $APTCACHE/. /var/cache/pbuilder/build/. | uniq -d)" ]; then
+  # apt cache for build on tmpfs is managed by hook scripts
+  BINDMOUNTS="${BINDMOUNTS} ${APTCACHE}"
+  APTCACHEHARDLINK=no
+  APTCACHE=""
+fi
 
 # default PKGNAME_LOGFILE
 PKGNAME_LOGFILE="__build__.log"
+
+#-- extra options
+DEBBUILDOPTS="-B"
+if [ "$ARCHITECTURE" == "amd64" ]; then
+  DEBBUILDOPTS="-b"
+fi
+if [ "${DISTRIBUTION#raspbian}" != "$DISTRIBUTION" ] && [ "$ARCHITECTURE" == "armhf" ]; then
+  DEBBUILDOPTS="-b"
+  DISTRIBUTION=${DISTRIBUTION#raspbian-}
+fi
+if [ -z "$DEB_SIGN_KEYID" ]; then
+  AUTO_DEBSIGN=${AUTO_DEBSIGN:-no}
+fi
+
+#-- choose dependency solver
+#-- apt is better if target distribution contains apt >= 1.4~beta3
+#-- aptitude is better if target distribution contains apt < 1.4~beta3
+case "$DISTRIBUTION" in
+  sid|buster|stretch|\
+  ceres|beowulf|ascii|\
+  bionic|artful|zesty)
+    PBUILDERSATISFYDEPENDSCMD="/usr/lib/pbuilder/pbuilder-satisfydepends-apt"
+    ;;
+
+  jessie|wheezy|squeeze|lenny|etch|sarge|\
+  raspbian-jessie|raspbian-wheezy|\
+  yakkety|xenial|wily|vivid|utopic|trusty|saucy|raring|quantal|precise|oneiric|natty|maverick|lucid)
+    PBUILDERSATISFYDEPENDSCMD="/usr/lib/pbuilder/pbuilder-satisfydepends-aptitude"
+    ;;
+esac

debian/_buildscripts/local/scripts/additional files/root/.pbuilder/hooks/__template_C10shell

@@ -1,7 +0,0 @@
-#!/bin/sh
-# invoke shell if build fails.
-
-apt-get install -y --force-yes vim less bash mc
-cd /tmp/buildd/*/debian/..
-echo "Build FAILED! Invoking shell"
-/bin/bash < /dev/tty > /dev/tty 2> /dev/tty

debian/_buildscripts/local/scripts/additional files/root/.pbuilderrc

@@ -1,152 +0,0 @@
-#!/bin/bash
-
-#-- this is necessary for running 'apt-ftparchive' in a hook script if required
-EXTRAPACKAGES="$EXTRAPACKAGES apt-utils"
-
-#-- get desired distribution and architecture
-if [ "$DIST" = "" ]; then
-	DIST=$(lsb_release -cs)
-fi
-DISTRIBUTION=$DIST
-if [ "$ARCH" = "" ]; then
-  ARCH=$(dpkg --print-architecture)
-fi
-ARCHITECTURE=$ARCH
-
-if [ -n "$T" ]; then
-  if [ "${T##*-}" = "vm" ]; then
-    BUILD_VM="qemu"
-    T=${T%-vm}
-  fi
-  if [ "${T#*@}" = "$T" ]; then
-    DISTRIBUTION=${T%-*}
-    ARCHITECTURE=${T##*-}
-  else
-    DISTRIBUTION=${T%@*}
-    ARCHITECTURE=${T##*@}
-  fi
-  if [ "${DISTRIBUTION##*-}" = "backports" ]; then
-    BACKPORTS="yes"
-    DISTRIBUTION=${DISTRIBUTION%-backports}
-  fi
-fi
-
-BASETGZ="/var/cache/pbuilder/base-$DIST@$ARCH.tgz"
-
-#-- select apt components
-case "$DISTRIBUTION" in
-    sid|buster|stretch|jessie|wheezy|squeeze|lenny|etch|sarge)
-        COMPONENTS="main contrib non-free"
-        ;;
-
-    ceres|beowulf|ascii)
-        COMPONENTS="main"
-        DEBOOTSTRAPOPTS=(--variant=buildd --no-check-gpg)
-        EXTRAPACKAGES="$EXTRAPACKAGES devuan-keyring"
-        ;;
-
-    bionic|artful|zesty|yakkety|xenial|wily|vivid|utopic|trusty|saucy|raring|quantal|precise|oneiric|natty|maverick|lucid)
-        COMPONENTS="main restricted universe multiverse"
-        DEBOOTSTRAPOPTS=(--variant=buildd)
-        ;;
-
-    raspbian-jessie|raspbian-wheezy)
-        COMPONENTS="main contrib non-free"
-        DEBOOTSTRAPOPTS=(--variant=buildd --no-check-gpg)
-        ;;
-esac
-EXTRAPACKAGES="$EXTRAPACKAGES fakeroot apt-transport-https ca-certificates"
-
-#-- select base apt sources
-case "$DISTRIBUTION" in
-    sid|buster|stretch|jessie|wheezy)
-        MIRRORSITE=http://deb.debian.org/debian
-        ;;
-
-    squeeze|lenny|etch|sarge)
-        MIRRORSITE=http://archive.debian.org/debian
-        OTHERMIRROR="#deb http://archive.debian.org/backports.org $DISTRIBUTION-backports main contrib non-free"
-        ;;
-
-    ceres|beowulf|ascii)
-        MIRRORSITE=http://auto.mirror.devuan.org/merged
-        ;;
-
-    bionic|artful|zesty|yakkety|wily|vivid|trusty|precise)
-        if [ "$ARCHITECTURE" = "amd64" ] || [ "$ARCHITECTURE" = "i386" ]; then
-            MIRRORSITE=http://archive.ubuntu.com/ubuntu
-        else
-            MIRRORSITE=http://ports.ubuntu.com
-        fi
-        ;;
-
-    xenial)
-        if [ "$ARCHITECTURE" = "amd64" ] || [ "$ARCHITECTURE" = "i386" ]; then
-            MIRRORSITE=http://archive.ubuntu.com/ubuntu
-        else
-            MIRRORSITE=http://ports.ubuntu.com
-        fi
-        OTHERMIRROR="deb $MIRRORSITE $DISTRIBUTION-updates $COMPONENTS"
-        ;;
-
-    utopic|saucy|raring|quantal|oneiric|natty|maverick|lucid)
-        MIRRORSITE=http://old-releases.ubuntu.com/ubuntu
-        ;;
-
-    raspbian-jessie|raspbian-wheezy)
-        MIRRORSITE=http://ftp.fi.muni.cz/pub/linux/raspbian/raspbian
-        ;;
-esac
-
-if [ -n "${ARCH}" ]; then
-    NAME="$NAME-$ARCH"
-    DEBOOTSTRAPOPTS=("--arch" "$ARCH" "${DEBOOTSTRAPOPTS[@]}")
-fi
-
-BUILDRESULT="/var/cache/pbuilder/$DISTRIBUTION/result/"
-
-APTCACHE="/var/cache/pbuilder/aptcache/$DISTRIBUTION/"
-if [ -n "$APTCACHE" ] && [ ! -d "$APTCACHE" ]; then
-  mkdir $APTCACHE
-fi
-if [ -z "$(stat -L --print "%d\n" $APTCACHE/. /var/cache/pbuilder/build/. | uniq -d)" ]; then
-  # apt cache for build on tmpfs is managed by hook scripts
-  BINDMOUNTS="${BINDMOUNTS} ${APTCACHE}"
-  APTCACHEHARDLINK=no
-  APTCACHE=""
-fi
-
-BUILDPLACE="/var/cache/pbuilder/build/"
-
-# default PKGNAME_LOGFILE
-PKGNAME_LOGFILE="__build__.log"
-
-#-- extra options
-DEBBUILDOPTS="-B"
-if [ "$ARCHITECTURE" == "amd64" ]; then
-  DEBBUILDOPTS="-b"
-fi
-if [ "${DISTRIBUTION#raspbian}" != "$DISTRIBUTION" ] && [ "$ARCHITECTURE" == "armhf" ]; then
-  DEBBUILDOPTS="-b"
-  DISTRIBUTION=${DISTRIBUTION#raspbian-}
-fi
-if [ -z "$DEB_SIGN_KEYID" ]; then
-  AUTO_DEBSIGN=${AUTO_DEBSIGN:-no}
-fi
-
-#-- choose dependency solver
-#-- apt is better if target distribution contains apt >= 1.4~beta3
-#-- aptitude is better if target distribution contains apt < 1.4~beta3
-case "$DISTRIBUTION" in
-  sid|buster|stretch|\
-  ceres|beowulf|ascii|\
-  bionic|artful|zesty)
-    PBUILDERSATISFYDEPENDSCMD="/usr/lib/pbuilder/pbuilder-satisfydepends-apt"
-    ;;
-
-  jessie|wheezy|squeeze|lenny|etch|sarge|\
-  raspbian-jessie|raspbian-wheezy|\
-  yakkety|xenial|wily|vivid|utopic|trusty|saucy|raring|quantal|precise|oneiric|natty|maverick|lucid)
-    PBUILDERSATISFYDEPENDSCMD="/usr/lib/pbuilder/pbuilder-satisfydepends-aptitude"
-    ;;
-esac

debian/_buildscripts/local/scripts/build_module.sh

@@ -4,15 +4,23 @@
 #
 
 # Load common code and initialization
-. ./_build_common.sh
+. ./internals/_build_common.sh
 init_common
 
+
 # Timer settings
 _BUILDMOD_TIMER_NUM=0
 _BUILDMOD_TIME="--/--:--:--:---"
 exec_time_start $_BUILDMOD_TIMER_NUM
 
 
+# Need sudo for non-root users
+SUDO_CMD=""
+if [ "`whoami`" != "root" ]; then
+	SUDO_CMD="sudo -E"	
+fi
+
+
 #----------------------------
 # Parameters:
 #  $1 - error code
@@ -40,7 +48,7 @@ function do_exit()
 function recreate_folder()
 {
   if [ -d "$1" ]; then
-		rm -R "$1"
+		$SUDO_CMD rm -R "$1"
 	fi
 	mkdir -p "$1"
 }
@@ -97,33 +105,18 @@ if [ "bool_BUILD_LOCALLY" = "y" ]; then
   bool_SHELL_HOOK="n"
   bool_INTERNAL_PBUILDER="n"
 fi
-
+export bool_SHELL_HOOK
-# pbuilder absolute paths
+export bool_INTERNAL_PBUILDER
-PBUILDER_HOOK_DIR="$HOME/.pbuilder/hooks"
-PBUILDER_SHELL_HOOK="$PBUILDER_HOOK_DIR/C10shell"
-PBUILDER_SHELL_HOOK_TEMPLATE="$PBUILDER_HOOK_DIR/__template_C10shell"
-PBUILDER_DEPS_HOOK="$PBUILDER_HOOK_DIR/D05deps"
-PBUILDER_DEPS_HOOK_SAVE="$PBUILDER_HOOK_DIR/__saved_D05deps"
 
 # Local option variables
-# - internal pbuilder
-OPT_INTERNAL_PBUILDER=""
-if [ "$bool_INTERNAL_PBUILDER" = "y" ]; then
-	OPT_INTERNAL_PBUILDER="--use-pdebuild-internal"
-fi
 # - sign packages
 OPT_SIGN_PKG_LOCAL="-uc -us"
-OPT_SIGN_PKG_PBUILDER=""
-if [ ! -z "$GPG_SIGN_KEYID" ]; then
-	OPT_SIGN_PKG_LOCAL="-k$GPG_SIGN_KEYID"
-	OPT_SIGN_PKG_PBUILDER="--auto-debsign --debsign-k $GPG_SIGN_KEYID"
-fi
 # - show logs
 OPT_SHOW_LOGS="&>"
 if [ "$bool_SHOW_BUILD_LOGS" = "y" ]; then
 	OPT_SHOW_LOGS=" | tee "
 fi
-
+export OPT_SHOW_LOGS
 
 # Log start
 echo -e "${CLightCyan}####  Processing module \"$MOD_NAME\"  ####${CNone}"
@@ -154,7 +147,7 @@ done
 # Build output directories
 #----------------------------
 TDE_BUILD_DIR="$TDE_DIR/$CFG_TDE_BUILD_DIR"
-TDE_DEBS_DIR="$TDE_DIR/$CFG_TDE_DEBS_DIR"
+export TDE_DEBS_DIR="$TDE_DIR/$CFG_TDE_DEBS_DIR"
 
 BUILD_DIRS=("TDE_BUILD_DIR" "TDE_DEBS_DIR")
 
@@ -218,14 +211,13 @@ else
   fi
 fi
 
-
 #----------------------------
 # Prepare source files
 #----------------------------
 # remove output from previous build
 if [ -d "$MOD_BUILD_PATH" ]; then
   cd "$MOD_BUILD_PATH/.."
-  rm *.deb *.dsc *.changes *.tar.bz2 *.tar.gz *.tar.xz *.log *.buildinfo &>/dev/null
+  $SUDO_CMD rm *.deb *.dsc *.changes *.tar.bz2 *.tar.gz *.tar.xz *.log *.buildinfo &>/dev/null
 fi
 
 # copy main repo source files, if needed
@@ -249,7 +241,7 @@ if [ "$bool_COPY_MOD_SRC" = "y" ]; then
     # Extra dependency module
     if [ `find "$MOD_GIT_PATH" -name '*.dsc' | wc -l` == 1 ]; then
       if [ -d "$MOD_BUILD_PATH" ]; then
-        rm -R "$MOD_BUILD_PATH"
+        $SUDO_CMD rm -R "$MOD_BUILD_PATH"
 	    fi
       eval dpkg-source --no-copy --no-check -x `find "$MOD_GIT_PATH" -name '*.dsc'` \
                        \"$MOD_BUILD_PATH\" $OPT_SHOW_LOGS/dev/null
@@ -267,7 +259,7 @@ fi
 # copying packaging scripts, if needed
 if [ "$bool_EXTRADEP_MOD" != "y"  -a  "$bool_COPY_PKGING_FILES" = "y" ]; then
   if [ -d "$MOD_BUILD_PKGING_PATH" ]; then
-		rm -R $MOD_BUILD_PKGING_PATH
+		$SUDO_CMD rm -R $MOD_BUILD_PKGING_PATH
 	fi
 	cp -R "$MOD_GIT_PKGING_PATH" "$MOD_BUILD_PKGING_PATH"
 	  
@@ -327,7 +319,7 @@ if [ "$bool_EXTRADEP_MOD" != "y"  -a  "$bool_COPY_PKGING_FILES" = "y" ]; then
 fi
 
 # prepare destination directory for building
-MOD_DEB_PATH="$TDE_DEBS_DIR/$MOD_NAME"
+export MOD_DEB_PATH="$TDE_DEBS_DIR/$MOD_NAME"
 MOD_DEBSRC_PATH="$MOD_DEB_PATH/src"
 recreate_folder "$MOD_DEB_PATH"
 recreate_folder "$MOD_DEBSRC_PATH"
@@ -390,7 +382,7 @@ fi
 #----------------------------
 # Build
 #----------------------------
-BUILDING_LOG_FILE="$MOD_DEBSRC_PATH/__build__.log"
+export BUILDING_LOG_FILE="$MOD_DEBSRC_PATH/__build__.log"
 cd "$MOD_BUILD_PATH"
 
 if [ "$bool_BUILD_LOCALLY" = "y" ]; then
@@ -398,48 +390,17 @@ if [ "$bool_BUILD_LOCALLY" = "y" ]; then
   echo -e "${CYellow}> Building locally${CNone}"
   eval dpkg-buildpackage $OPT_SIGN_PKG_LOCAL $OPT_SHOW_LOGS\"$BUILDING_LOG_FILE\"
 	build_retval=$?
-  #
 else
   ## Build module in a clean chroot environment using pbuilder
-  # Install/remove shell hook
+  $SUDO_CMD "$SCRIPT_DIR/internals/_pbuilder.sh"
-  if [ "$bool_SHELL_HOOK" = "y" ]; then
-    if [ -x "$PBUILDER_SHELL_HOOK_TEMPLATE" ]; then
-		  cp "$PBUILDER_SHELL_HOOK_TEMPLATE" "$PBUILDER_SHELL_HOOK" &>/dev/null
-    else
-      echo "pbuilder shell hook template file not found! ($PBUILDER_SHELL_HOOK_TEMPLATE)"
-	  fi
-  else
-    if [ -x "$PBUILDER_SHELL_HOOK" ]; then
-		  rm "$PBUILDER_SHELL_HOOK" &>/dev/null
-	  fi
-  fi
-  # Build using pbuilder
-  echo -e "${CYellow}> Building using pbuilder${CNone}"
-  # Create pbuilder hook to make sure all available packages are scanned
-  # Store any existing D05 hook as a temporary file, this will be reinstated at the end
-  if [ -x "$PBUILDER_DEPS_HOOK" ]; then
-		mv "$PBUILDER_DEPS_HOOK" "$PBUILDER_DEPS_HOOK_SAVE"
-  fi
-	cat <<END_D05 > "$PBUILDER_DEPS_HOOK"
-#!/bin/sh
-(cd "$TDE_DEBS_DIR"; apt-ftparchive packages . > Packages)
-echo "deb [trusted=yes] file://$TDE_DEBS_DIR ./" >> /etc/apt/sources.list
-apt-get update
-END_D05
-	chmod a+x "$PBUILDER_DEPS_HOOK"
-  # Build
-	eval pdebuild $OPT_INTERNAL_PBUILDER $OPT_SIGN_PKG_PBUILDER \
-	              --architecture $ARCHITECTURE  \
-	              --buildresult \"$MOD_DEB_PATH\" \
-	              --pbuilderroot \"sudo DIST=$DISTRO_NAME ARCH=$ARCHITECTURE\" \
-	              --logfile \"$BUILDING_LOG_FILE\" \
-	              -- \
-	              --bindmounts \"$TDE_DEBS_DIR\" \
-	              --hookdir \"$PBUILDER_HOOK_DIR\" \
-	              $OPT_SHOW_LOGS\"$BUILDING_LOG_FILE\"
 	build_retval=$?
-  if [ -x "$PBUILDER_DEPS_HOOK" ]; then
+	if [ "`whoami`" != "root" ]; then
-		mv "$PBUILDER_DEPS_HOOK_SAVE" "$PBUILDER_DEPS_HOOK"
+		cd "$MOD_DEB_PATH"
+		$SUDO_CMD chown -R `id -u -n`:`id -g -n` .  &>/dev/null
+		cd "$MOD_BUILD_PATH/.."
+		$SUDO_CMD chown `id -u -n`:`id -g -n` *.dsc *.changes *.tar.xz *.tar.bz2 *.tar.gz *.buildinfo &>/dev/null
+		$SUDO_CMD chown `id -u -n`:`id -g -n` "$TDE_DEBS_DIR/Packages" &>/dev/null
+		cd "$MOD_BUILD_PATH"
 	fi
 fi
 

debian/_buildscripts/local/scripts/create_repo.sh

@@ -4,7 +4,7 @@
 #
 
 # Load common code and initialization
-. ./_build_common.sh
+. ./internals/_build_common.sh
 init_common
 
 #----------------------------

debian/_buildscripts/local/scripts/internals/C10shell

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+# Color table
+CPurple='\e[0;35m'
+CWhite='\e[1;37m'
+CNone='\e[0m'
+
+# Invoke shell if build fails.
+apt-get install -y --force-yes vim less bash mc
+cd /tmp/buildd/*/debian/..
+echo "${CPurple}---------------------------------------------------------${CNone}" >/dev/tty
+echo "${CPurple}                !!!  Build FAILED  !!!                   ${CNone}" >/dev/tty
+echo "${CPurple} You are now inside a shell in the building environment. ${CNone}" >/dev/tty
+echo "${CPurple} ${CWhite}mc, vim, less${CPurple} are available for your convenience.       ${CNone}" >/dev/tty
+echo "${CPurple} Type ${CWhite}exit${CPurple} to leave the shell when you are done.       ${CNone}" >/dev/tty
+echo "${CPurple}---------------------------------------------------------${CNone}" >/dev/tty
+/bin/bash </dev/tty >/dev/tty 2>/dev/tty
+

debian/_buildscripts/local/scripts/internals/_build_common.sh

@@ -13,6 +13,7 @@
 # Brown       0;33     Yellow        1;33
 # Light Gray  0;37     White         1;37
 # No Color    0
+set -a
 CBlack='\e[0;30m'
 CDarkGray='\e[1;30m'
 CBlue='\e[0;34m'
@@ -30,13 +31,13 @@ CYellow='\e[1;33m'
 CGray='\e[0;37m'
 CWhite='\e[1;37m'
 CNone='\e[0m'
-
+set +a
 
 #----------------------------
 function init_common()
 {
 	# Check script folder
-	SCRIPT_DIR=$(dirname $(readlink -f "$0"))
+	export SCRIPT_DIR=$(dirname $(readlink -f "$0"))
 	
 	# Prevent the script to be run from TDE packaging repo
 	REPO_URL=$(git config --get remote.origin.url 2>/dev/null)
@@ -48,14 +49,14 @@ function init_common()
 	fi
 		
 	# Read config settings
-	CFG_FILE=$SCRIPT_DIR/build_config.sh
+	CFG_FILE=$SCRIPT_DIR/_config.sh
 	if [ -f "$CFG_FILE" ]; then
 		. "$CFG_FILE"
 	else
 		echo -e "${CYellow}  --- NOTE ---${CNone}"
 		echo "Creating TDE build configuration file from template as $CFG_FILE."
 		echo "Please check and modify as required, then rerun this script."
-		cp "$SCRIPT_DIR/_build_config_template.sh" "$CFG_FILE"
+		cp "$SCRIPT_DIR/internals/_config_template.sh" "$CFG_FILE"
 		exit 2
 	fi
 	
@@ -91,7 +92,7 @@ function init_common()
 	fi
 	
 	# Make sure we have selected a supported distribution
-	DISTS_FILE=$SCRIPT_DIR/distro_list.txt
+	DISTS_FILE=$SCRIPT_DIR/internals/distro_list.txt
 	if [ ! -f "$DISTS_FILE" ]; then
 		echo -e "${CYellow}  --- NOTE ---${CNone}"
 		echo "Could not find the list of supported distributions."
@@ -120,8 +121,8 @@ function init_common()
 		exit 7
 	fi
 	
-  SCRIPT_LOG_DIR=$TDE_DIR/$CFG_SCRIPT_LOG_DIR
+  export SCRIPT_LOG_DIR=$TDE_DIR/$CFG_SCRIPT_LOG_DIR
-	LOG_RESULT_FILENAME="$SCRIPT_LOG_DIR/build_result.log"  # Log result into the common build logfile
+	export LOG_RESULT_FILENAME="$SCRIPT_LOG_DIR/build_result.log"  # Log result into the common build logfile
 
   cd "$SCRIPT_DIR"
 }

debian/_buildscripts/local/scripts/internals/_build_set_common.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Load common code and initialization
-. ./_build_common.sh
+. ./internals/_build_common.sh
 init_common
 
 _BUILDSET_TIMER=1

debian/_buildscripts/local/scripts/internals/_config_template.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
+set -a
 
 #----------------------------
 # Build information
@@ -36,3 +37,6 @@ CFG_HOOK_DIR="$CFG_GIT_DIR/$CFG_HOOKS_DIR"
 #----------------------------
 CFG_TDE_BUILD_DIR="$CFG_BUILD_DIR/build"
 CFG_TDE_DEBS_DIR="$CFG_BUILD_DIR/debs"
+
+#----------------------------
+set +a

debian/_buildscripts/local/scripts/internals/_pbuilder.sh

@@ -0,0 +1,75 @@
+#!/bin/bash
+
+function run_pdebuild()
+{
+	# pbuilder absolute paths
+	PBUILDER_HOOK_DIR="/var/cache/pbuilder/hooks"
+	PBUILDER_SHELL_HOOK_TEMPLATE="$SCRIPT_DIR/internals/C10shell"
+	PBUILDER_SHELL_HOOK="$PBUILDER_HOOK_DIR/C10shell"
+	PBUILDER_DEPS_HOOK="$PBUILDER_HOOK_DIR/D05deps"
+	
+	# Local option variables
+	# - internal pbuilder
+	OPT_INTERNAL_PBUILDER=""
+	if [ "$bool_INTERNAL_PBUILDER" = "y" ]; then
+		OPT_INTERNAL_PBUILDER="--use-pdebuild-internal"
+	fi
+	# Sign packages optino
+	OPT_SIGN_PKG_PBUILDER=""
+	if [ ! -z "$GPG_SIGN_KEYID" ]; then
+		OPT_SIGN_PKG_LOCAL="-k$GPG_SIGN_KEYID"
+		OPT_SIGN_PKG_PBUILDER="--auto-debsign --debsign-k $GPG_SIGN_KEYID"
+	fi
+	
+	## Build module in a clean chroot environment using pbuilder
+	# Install/remove shell hook
+	if [ ! -d "$PBUILDER_HOOK_DIR" ]; then
+		mkdir -p "$PBUILDER_HOOK_DIR"
+	fi
+	if [ "$bool_SHELL_HOOK" = "y" ]; then
+		cp "$PBUILDER_SHELL_HOOK_TEMPLATE" "$PBUILDER_SHELL_HOOK"
+		chmod a+x "$PBUILDER_SHELL_HOOK"
+	else
+		if [ -x "$PBUILDER_SHELL_HOOK" ]; then
+			rm "$PBUILDER_SHELL_HOOK"
+		fi
+	fi
+	# Build using pbuilder
+	echo -e "${CYellow}> Building using pbuilder${CNone}"
+	# Create pbuilder hook to make sure all available packages are scanned
+	# Store any existing D05 hook as a temporary file, this will be reinstated at the end
+	cat <<END_D05 > "$PBUILDER_DEPS_HOOK"
+#!/bin/sh
+(cd "$TDE_DEBS_DIR"; apt-ftparchive packages . > Packages)
+echo "deb [trusted=yes] file://$TDE_DEBS_DIR ./" >> /etc/apt/sources.list
+apt-get update
+END_D05
+	chmod a+x "$PBUILDER_DEPS_HOOK"
+	# Build
+	eval pdebuild $OPT_INTERNAL_PBUILDER $OPT_SIGN_PKG_PBUILDER \
+								--architecture $ARCHITECTURE  \
+								--buildresult \"$MOD_DEB_PATH\" \
+								--pbuilderroot \"sudo DIST=$DISTRO_NAME ARCH=$ARCHITECTURE\" \
+								--logfile \"$BUILDING_LOG_FILE\" \
+								-- \
+								--bindmounts \"$TDE_DEBS_DIR\" \
+								--hookdir \"$PBUILDER_HOOK_DIR\" \
+								$OPT_SHOW_LOGS\"$BUILDING_LOG_FILE\"
+	PBUILDER_RETVAL=$?
+	# Remove shell hook if it was installed before the build
+	if [ -x "$PBUILDER_SHELL_HOOK" ]; then
+		rm "$PBUILDER_SHELL_HOOK"
+	fi
+	# Remove deps hook
+	if [ -x "$PBUILDER_DEPS_HOOK" ]; then
+		rm "$PBUILDER_DEPS_HOOK"
+	fi
+	# Return pdebuild return value to calling function
+	return $PBUILDER_RETVAL
+}
+
+
+#----------------------------
+# The actual code is inside a function to allow the pdebuild return value to be
+# correctly passed back to the calling script in all cases (root and non root users)
+run_pdebuild

debian/_buildscripts/local/scripts/internals/_update_repositories.sh

@@ -1,12 +1,5 @@
 #!/bin/bash
 
-# Load common code
-. ./_build_common.sh
-
-#----------------------------
-# Initialization
-init_common
-
 #----------------------------
 # Update TDE main repository
 echo -e "\n---- Updating main TDE GIT repo ----\n"

debian/_buildscripts/local/scripts/update_repositories.sh

@@ -1,10 +1,7 @@
 #!/bin/bash
 
 # Load common code
-. ./_build_common.sh
+. ./internals/_build_common.sh
-
-#----------------------------
-# Initialization
 init_common
 
 #----------------------------
@@ -14,6 +11,6 @@ if [ ! -d "$SCRIPT_LOG_DIR" ]; then
 	exit 1
 fi
 echo "Update in progress..."
-./_update_repositories-int.sh &>"$SCRIPT_LOG_DIR/update-repos.log"
+. ./internals/_update_repositories.sh &>"$SCRIPT_LOG_DIR/update-repos.log"
 echo "Update completed."