TDE
/
kvpnc
mirror of https://mirror.git.trinitydesktop.org/gitea/TDE/kvpnc
0
0
Fork 0
Code Issues Releases Wiki Activity

Remove unnecessary accelerator from .ui files.

Browse Source 
Signed-off-by: Michele Calgaro <michele.calgaro@yahoo.it>
pull/6/head
Michele Calgaro 2 years ago
parent be4246c818
commit 324cedb508
Signed by: MicheleC
GPG Key ID: 2A75B7CA8ADED5CF
59 changed files with 0 additions and 807 deletions
Show Stats Download Patch File Download Diff File

6
src/addnetworkroutedialogbase.ui
Unescape View File

@ -227,9 +227,6 @@
<property name="text">
<string>Use gatewa&amp;y</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Use the gateway to reach this network</string>
</property>
@ -285,9 +282,6 @@
<property name="text">
<string>Use &amp;interface</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="toolTip" stdset="0">
<string>Use the gateway to reach this network</string>
</property>

15
src/advancedprofiledialogbase.ui
Unescape View File

@ -26,9 +26,6 @@
<property name="text">
<string>&amp;Enable advanced settings</string>
</property>
<property name="accel">
<string>Alt+E</string>
</property>
<property name="toolTip" stdset="0">
<string>Enable advanced settings for profile</string>
</property>
@ -68,9 +65,6 @@
<property name="text">
<string>Allow single DES encr&amp;yption</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Allow single DES encryption (insecure)</string>
</property>
@ -82,9 +76,6 @@
<property name="text">
<string>&amp;IKE DH group:</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="toolTip" stdset="0">
<string>Use special Diffie Hellman group</string>
</property>
@ -96,9 +87,6 @@
<property name="text">
<string>Perfect for&amp;ward secrecy (PFS):</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Use perfect forward secrety (PFS)</string>
</property>
@ -110,9 +98,6 @@
<property name="text">
<string>Application &amp;version:</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Send an own application version string</string>
</property>

6
src/advancedprofilesettingsdialogbase.ui
Unescape View File

@ -651,9 +651,6 @@
<property name="text">
<string>&amp;OK</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="autoDefault">
<bool>true</bool>
</property>
@ -671,9 +668,6 @@
<property name="text">
<string>&amp;Cancel</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="autoDefault">
<bool>true</bool>
</property>

6
src/ciscocertificateenrollmentbase.ui
Unescape View File

@ -58,9 +58,6 @@
<property name="text">
<string>Fi&amp;le</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="KURLRequester" row="7" column="1">
<property name="name">
@ -209,9 +206,6 @@
<property name="text">
<string>&amp;Online</string>
</property>
<property name="accel">
<string>Alt+O</string>
</property>
<property name="checked">
<bool>true</bool>
</property>

9
src/configconnectoptionsbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>&amp;Minimize after connect</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -97,9 +94,6 @@
<property name="text">
<string>Use silent &amp;quit</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Enable exit without warning
about the active connecions</string>
@ -156,9 +150,6 @@ about the active connecions</string>
<property name="text">
<string>Au&amp;tomatically connect at startup:</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="checked">
<bool>true</bool>
</property>

90
src/configdaemonoptionsbase.ui
Unescape View File

@ -61,9 +61,6 @@
<property name="text">
<string>A&amp;ll programs are in PATH</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -95,9 +92,6 @@
<property name="text">
<string>Sho&amp;w tunnel IP in tooltip</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Show retrieved IP address for tunnel in kvpnc icon tooltip</string>
</property>
@ -644,9 +638,6 @@
<property name="text">
<string>cr&amp;ypt</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -661,9 +652,6 @@
<property name="text">
<string>&amp;private</string>
</property>
<property name="accel">
<string>Alt+P</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -678,9 +666,6 @@
<property name="text">
<string>&amp;klips</string>
</property>
<property name="accel">
<string>Alt+K</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -695,9 +680,6 @@
<property name="text">
<string>emitting</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -712,9 +694,6 @@
<property name="text">
<string>&amp;raw</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -729,9 +708,6 @@
<property name="text">
<string>&amp;control</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -746,9 +722,6 @@
<property name="text">
<string>&amp;parsing</string>
</property>
<property name="accel">
<string>Alt+P</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -804,9 +777,6 @@
<property name="text">
<string>spi</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="3" column="1">
<property name="name">
@ -815,9 +785,6 @@
<property name="text">
<string>ah</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="3" column="0">
<property name="name">
@ -826,9 +793,6 @@
<property name="text">
<string>esp</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="1" column="1">
<property name="name">
@ -837,9 +801,6 @@
<property name="text">
<string>eroute</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="0" column="1">
<property name="name">
@ -848,9 +809,6 @@
<property name="text">
<string>pfkey</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="2" column="1">
<property name="name">
@ -859,9 +817,6 @@
<property name="text">
<string>radij</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="4" column="1">
<property name="name">
@ -870,9 +825,6 @@
<property name="text">
<string>verbose</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="4" column="0">
<property name="name">
@ -881,9 +833,6 @@
<property name="text">
<string>ipcomp</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="1" column="0">
<property name="name">
@ -892,9 +841,6 @@
<property name="text">
<string>xform</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="0" column="0">
<property name="name">
@ -903,9 +849,6 @@
<property name="text">
<string>&amp;tunnel-xmit</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
</widget>
</grid>
</widget>
@ -1113,9 +1056,6 @@
<property name="text">
<string>Do kill &amp;racoon if still running</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
</widget>
</hbox>
</widget>
@ -1359,9 +1299,6 @@
<property name="text">
<string>Ena&amp;ble pppd debug</string>
</property>
<property name="accel">
<string>Alt+B</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -1403,9 +1340,6 @@
<property name="text">
<string>Ena&amp;ble pptpd debug</string>
</property>
<property name="accel">
<string>Alt+B</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -1874,9 +1808,6 @@
<property name="text">
<string>Enable l2tpd debug</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>
@ -1891,9 +1822,6 @@
<property name="text">
<string>Do kill l&amp;2tpd if still running</string>
</property>
<property name="accel">
<string>Alt+2</string>
</property>
</widget>
</hbox>
</widget>
@ -2035,9 +1963,6 @@
<property name="text">
<string>Do kill &amp;xl2tpd if still running</string>
</property>
<property name="accel">
<string>Alt+X</string>
</property>
</widget>
</hbox>
</widget>
@ -2058,9 +1983,6 @@
<property name="text">
<string>enable L2TP state debug</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="0" column="0">
<property name="name">
@ -2069,9 +1991,6 @@
<property name="text">
<string>enable L2TP AVP debug</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="1" column="0">
<property name="name">
@ -2080,9 +1999,6 @@
<property name="text">
<string>enable L2TP packet debug</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="0" column="1">
<property name="name">
@ -2091,9 +2007,6 @@
<property name="text">
<string>enable L2TP network debug</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
</grid>
</widget>
@ -2236,9 +2149,6 @@
<property name="text">
<string>Enable &amp;openl2tp debug</string>
</property>
<property name="accel">
<string>Alt+O</string>
</property>
<property name="toolTip" stdset="0">
<string>Show debug output from pppd</string>
</property>

9
src/configdebugoptionsbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>S&amp;how debug console</string>
</property>
<property name="accel">
<string>Alt+H</string>
</property>
<property name="toolTip" stdset="0">
<string>Show the debug console in main window</string>
</property>
@ -86,9 +83,6 @@
<property name="text">
<string>Write log &amp;file</string>
</property>
<property name="accel">
<string>Alt+F</string>
</property>
<property name="toolTip" stdset="0">
<string>Write logs to file: $HOME/.trinity/share/apps/kvpnc/kvpnc.log</string>
</property>
@ -194,9 +188,6 @@
<property name="text">
<string>Keep connec&amp;tion files</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not remove connection config files after use</string>
</property>

9
src/configgeneraloptions.ui
Unescape View File

@ -60,9 +60,6 @@
<property name="text">
<string>Use K&amp;Wallet</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Use TDEWallet for secure store passwords</string>
</property>
@ -104,9 +101,6 @@
<property name="text">
<string>Do not &amp;quit by clicking close button</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Close button minimizes to system tray &lt;br&gt;(kicker) instead of quit the program</string>
</property>
@ -145,9 +139,6 @@
<property name="text">
<string>Hide on startup</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Hides the KVpnc mainwindow on startup. KVpnc is still accessable vrom dock menu.</string>
</property>

12
src/configlogoptionsbase.ui
Unescape View File

@ -100,9 +100,6 @@
<property name="text">
<string>Enable colori&amp;zed log output</string>
</property>
<property name="accel">
<string>Alt+Z</string>
</property>
<property name="toolTip" stdset="0">
<string>Enable color messages in the debug console (recommend)</string>
</property>
@ -353,9 +350,6 @@
<property name="text">
<string>Chan&amp;ge...</string>
</property>
<property name="accel">
<string>Alt+G</string>
</property>
<property name="toolTip" stdset="0">
<string>Change color of this message type</string>
</property>
@ -419,9 +413,6 @@
<property name="text">
<string>&amp;Change...</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
<property name="toolTip" stdset="0">
<string>Change color of this message type</string>
</property>
@ -485,9 +476,6 @@
<property name="text">
<string>&amp;Change...</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
<property name="toolTip" stdset="0">
<string>Change color of this message type</string>
</property>

9
src/enterpassworddialogbase.ui
Unescape View File

@ -247,9 +247,6 @@
<property name="text">
<string>Save &amp;username</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Save username, shared secret and password &lt;br&gt;in config file or in TDEWallet</string>
</property>
@ -261,9 +258,6 @@
<property name="text">
<string>Save PSK</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Save username, shared secret and password &lt;br&gt;in config file or in TDEWallet</string>
</property>
@ -275,9 +269,6 @@
<property name="text">
<string>Save password</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Save username, shared secret and password &lt;br&gt;in config file or in TDEWallet</string>
</property>

3
src/enterxauthinteractivepasscodedialogbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>Save pass&amp;word</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
</widget>
<widget class="TQLayoutWidget" row="0" column="0">
<property name="name">

3
src/importcertificatedialogbase.ui
Unescape View File

@ -237,9 +237,6 @@
<property name="text">
<string>Protect private key &amp;with passphrase</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="checked">
<bool>true</bool>
</property>

3
src/importopenvpnprofiledialogbase.ui
Unescape View File

@ -66,9 +66,6 @@
<property name="text">
<string>open &amp;profile manager after import</string>
</property>
<property name="accel">
<string>Alt+P</string>
</property>
</widget>
</grid>
</widget>

3
src/importprofiledialogbase.ui
Unescape View File

@ -104,9 +104,6 @@
<property name="text">
<string>open &amp;profile manager after import</string>
</property>
<property name="accel">
<string>Alt+P</string>
</property>
</widget>
</hbox>
</widget>

12
src/kvpncimportprofileselectiondialogbase.ui
Unescape View File

@ -55,9 +55,6 @@
<property name="text">
<string>import &amp;global settings</string>
</property>
<property name="accel">
<string>Alt+G</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -66,9 +63,6 @@
<property name="text">
<string>open &amp;profile manager after import</string>
</property>
<property name="accel">
<string>Alt+P</string>
</property>
</widget>
<spacer>
<property name="name">
@ -175,9 +169,6 @@
<property name="text">
<string>Togg&amp;le all</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="KPushButton">
<property name="name">
@ -186,9 +177,6 @@
<property name="text">
<string>&amp;Import selected profiles</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
</widget>
</hbox>
</widget>

6
src/logviewerdialogbase.ui
Unescape View File

@ -84,9 +84,6 @@
<property name="text">
<string>up&amp;date</string>
</property>
<property name="accel">
<string>Alt+D</string>
</property>
</widget>
<widget class="TQLabel">
<property name="name">
@ -108,9 +105,6 @@
<property name="text">
<string>&amp;find</string>
</property>
<property name="accel">
<string>Alt+F</string>
</property>
</widget>
</hbox>
</widget>

6
src/mainviewbase.ui
Unescape View File

@ -69,9 +69,6 @@
<property name="text">
<string>Connec&amp;t</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="autoDefault">
<bool>true</bool>
</property>
@ -92,9 +89,6 @@
<property name="text">
<string>&amp;Disconnect</string>
</property>
<property name="accel">
<string>Alt+D</string>
</property>
<property name="autoDefault">
<bool>true</bool>
</property>

6
src/manageciscocertbase.ui
Unescape View File

@ -110,9 +110,6 @@
<property name="text">
<string>&amp;Delete cert from cert store</string>
</property>
<property name="accel">
<string>Alt+D</string>
</property>
</widget>
<spacer>
<property name="name">
@ -148,9 +145,6 @@
<property name="text">
<string>&amp;Import certificate from file...</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
</widget>
<spacer>
<property name="name">

15
src/newprofiledialogbase.ui
Unescape View File

@ -40,9 +40,6 @@
<property name="text">
<string>Ad&amp;vanced...</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Advanced settings (mostly not need)</string>
</property>
@ -81,9 +78,6 @@
<property name="text">
<string>&amp;Import Cisco PCF Profile...</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="toolTip" stdset="0">
<string>Import Cisco PCF profile</string>
</property>
@ -95,9 +89,6 @@
<property name="text">
<string>Import p1&amp;2 Certificate...</string>
</property>
<property name="accel">
<string>Alt+2</string>
</property>
<property name="toolTip" stdset="0">
<string>Import a certificate in P12 format</string>
</property>
@ -213,9 +204,6 @@
<property name="text">
<string>&amp;Save user password</string>
</property>
<property name="accel">
<string>Alt+S</string>
</property>
<property name="toolTip" stdset="0">
<string>Save the user password in config file (or in TDEWallet if available)</string>
</property>
@ -358,9 +346,6 @@
<property name="text">
<string>Save &amp;group password</string>
</property>
<property name="accel">
<string>Alt+G</string>
</property>
<property name="toolTip" stdset="0">
<string>Save the group password in config file (or in TDEWallet if available)</string>
</property>

9
src/newprofilewizardauthselection.ui
Unescape View File

@ -37,9 +37,6 @@
<property name="text">
<string>Pre-shared ke&amp;y (shared secret)</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -51,9 +48,6 @@
<property name="text">
<string>&amp;Certificate</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
</widget>
<widget class="TQRadioButton" row="2" column="0">
<property name="name">
@ -62,9 +56,6 @@
<property name="text">
<string>&amp;Hybrid</string>
</property>
<property name="accel">
<string>Alt+H</string>
</property>
</widget>
</grid>
</widget>

9
src/newprofilewizardcert.ui
Unescape View File

@ -50,9 +50,6 @@
<property name="text">
<string>Enable PKCS&amp;11 smartcard support</string>
</property>
<property name="accel">
<string>Alt+1</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -288,9 +285,6 @@
<property name="text">
<string>&amp;Use special server certificate</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -423,9 +417,6 @@
<property name="text">
<string>Use token provider &amp;library:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="KURLRequester">
<property name="name">

6
src/newprofilewizardciscomanually.ui
Unescape View File

@ -68,9 +68,6 @@
<property name="text">
<string>Save group &amp;password</string>
</property>
<property name="accel">
<string>Alt+P</string>
</property>
<property name="toolTip" stdset="0">
<string>Save the group password in config file (or in TDEWallet if available)</string>
</property>
@ -107,9 +104,6 @@
<property name="text">
<string>A&amp;llow empty group password (insecure!)</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Allow an empty group password (not recommended, insecure)</string>
</property>

6
src/newprofilewizardciscoselection.ui
Unescape View File

@ -37,9 +37,6 @@
<property name="text">
<string>&amp;Import PCF file</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -51,9 +48,6 @@
<property name="text">
<string>Enter data manuall&amp;y</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
</grid>
</widget>

9
src/newprofilewizardconnectionstatuscheck.ui
Unescape View File

@ -45,9 +45,6 @@
<property name="text">
<string>Use connection status c&amp;heck</string>
</property>
<property name="accel">
<string>Alt+H</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -180,9 +177,6 @@
<property name="text">
<string>Reconnect after connection &amp;lost</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -230,9 +224,6 @@
<property name="text">
<string>Use specified &amp;address to ping:</string>
</property>
<property name="accel">
<string>Alt+A</string>
</property>
<property name="toolTip" stdset="0">
<string>Use specified address instead the gateway address &lt;br&gt;to test the connection status</string>
</property>

6
src/newprofilewizardconnectoptions.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>Connect after creating ne&amp;w profile</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
</widget>
<spacer>
<property name="name">
@ -80,9 +77,6 @@
<property name="text">
<string>&amp;Connect automatically at startup:</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
<property name="checked">
<bool>false</bool>
</property>

45
src/newprofilewizardfreeswan.ui
Unescape View File

@ -53,9 +53,6 @@
<property name="text">
<string>Authenticate &amp;with username and password (XAUTH)</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>enable this if you want enable the XAUTh extension</string>
</property>
@ -94,9 +91,6 @@
<property name="text">
<string>Use &amp;Mode Configuration</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
</widget>
<spacer>
<property name="name">
@ -122,9 +116,6 @@
<property name="text">
<string>Use Perfect for&amp;ward secrecy (PFS)</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Use perfect forward secrety (PFS)</string>
</property>
@ -312,9 +303,6 @@
<property name="text">
<string>aes25&amp;6-sha1</string>
</property>
<property name="accel">
<string>Alt+6</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -323,9 +311,6 @@
<property name="text">
<string>aes&amp;128-sha1</string>
</property>
<property name="accel">
<string>Alt+1</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -334,9 +319,6 @@
<property name="text">
<string>3des-sha1-modp20&amp;48</string>
</property>
<property name="accel">
<string>Alt+4</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -345,9 +327,6 @@
<property name="text">
<string>3des-sha1</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -356,9 +335,6 @@
<property name="text">
<string>&amp;3des-md5</string>
</property>
<property name="accel">
<string>Alt+3</string>
</property>
</widget>
<widget class="TQLayoutWidget">
<property name="name">
@ -402,9 +378,6 @@
<property name="text">
<string>Use custom ESP</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQGroupBox">
<property name="name">
@ -427,9 +400,6 @@
<property name="text">
<string>aes2&amp;56-sha1</string>
</property>
<property name="accel">
<string>Alt+5</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -438,9 +408,6 @@
<property name="text">
<string>aes12&amp;8-sha1</string>
</property>
<property name="accel">
<string>Alt+8</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -449,9 +416,6 @@
<property name="text">
<string>3des-sha1</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -505,9 +469,6 @@
<property name="text">
<string>&amp;Use right next hop:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="KLineEdit" row="1" column="1">
<property name="name">
@ -524,9 +485,6 @@
<property name="text">
<string>Use &amp;left next hop:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="KLineEdit" row="0" column="1">
<property name="name">
@ -692,9 +650,6 @@
<property name="text">
<string>Disable opportunistic encr&amp;yption</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
<spacer>
<property name="name">

6
src/newprofilewizardnat.ui
Unescape View File

@ -50,9 +50,6 @@
<property name="text">
<string>Use UDP</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>For IPSec use UDP encapsulation (NAT-T). For openvpn &lt;br&gt;use UDP instead of TCP protocol.</string>
</property>
@ -111,9 +108,6 @@
<property name="text">
<string>&amp;UDP Encapsulation Port:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Use specified port number for IPSec NAT-T</string>
</property>

9
src/newprofilewizardnetwork.ui
Unescape View File

@ -94,9 +94,6 @@
<property name="text">
<string>&amp;Use remote network</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="TQGroupBox">
<property name="name">
@ -302,9 +299,6 @@
<property name="text">
<string>Userdefined &amp;MTU:</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Check this to set a custom MTU size</string>
</property>
@ -359,9 +353,6 @@
<property name="text">
<string>Userdefined M&amp;RU:</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
<property name="toolTip" stdset="0">
<string>Check this to set a custom MTU size</string>
</property>

9
src/newprofilewizardnetworkroute.ui
Unescape View File

@ -87,9 +87,6 @@
<property name="text">
<string>&amp;Use additional network routes</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="TDEListView">
<column>
@ -187,9 +184,6 @@
<property name="text">
<string>Add &amp;route...</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
<property name="toolTip" stdset="0">
<string>Add new route</string>
</property>
@ -204,9 +198,6 @@
<property name="text">
<string>De&amp;lete</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Delete route</string>
</property>

18
src/newprofilewizardopenvpn.ui
Unescape View File

@ -92,9 +92,6 @@
<property name="text">
<string>Use TLS auth:</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Add an additional TLS authentication</string>
</property>
@ -190,9 +187,6 @@
<property name="text">
<string>Accept onl&amp;y peer with common name:</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Accept connections only from a host with X509 name &lt;br&gt;or common name equal to specified name</string>
</property>
@ -231,9 +225,6 @@
<property name="text">
<string>Allow IP address change of peer (for DHCP)</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -289,9 +280,6 @@
<property name="text">
<string>Disable L&amp;ZO compression</string>
</property>
<property name="accel">
<string>Alt+Z</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -406,9 +394,6 @@
<property name="text">
<string>Re&amp;quire peer ns cert type:</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Require that peer certificate was signed with an explicit nsCertType destination of "client" or "server"</string>
</property>
@ -540,9 +525,6 @@
<property name="text">
<string>Use &amp;HTTP proxy</string>
</property>
<property name="accel">
<string>Alt+H</string>
</property>
<property name="toolTip" stdset="0">
<string>Connect via HTTP proxy</string>
</property>

6
src/newprofilewizardopenvpnauth.ui
Unescape View File

@ -59,9 +59,6 @@
<property name="text">
<string>Authenticate &amp;with username and password</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Authenticate with server using username and password</string>
</property>
@ -103,9 +100,6 @@
<property name="text">
<string>Use onl&amp;y CA cert and authenticate with username and password</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>

6
src/newprofilewizardopenvpnselection.ui
Unescape View File

@ -37,9 +37,6 @@
<property name="text">
<string>Import &amp;OpenVPN config file</string>
</property>
<property name="accel">
<string>Alt+O</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -51,9 +48,6 @@
<property name="text">
<string>Enter data &amp;manually</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
</widget>
</grid>
</widget>

9
src/newprofilewizardp12certselection.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>Enable PKCS11 s&amp;martcard support</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -70,9 +67,6 @@
<property name="text">
<string>&amp;No</string>
</property>
<property name="accel">
<string>Alt+N</string>
</property>
</widget>
<widget class="TQRadioButton" row="0" column="0">
<property name="name">
@ -81,9 +75,6 @@
<property name="text">
<string>&amp;Yes</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="checked">
<bool>true</bool>
</property>

45
src/newprofilewizardpptp.ui
Unescape View File

@ -141,9 +141,6 @@
<property name="text">
<string>Disable CCP negotiation</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disable Compression Control Protocol negotiation</string>
</property>
@ -158,9 +155,6 @@
<property name="text">
<string>Do not use deflate met&amp;hod</string>
</property>
<property name="accel">
<string>Alt+H</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not use deflate decompression method (disabled by default)</string>
</property>
@ -172,9 +166,6 @@
<property name="text">
<string>Disable protocol field compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disable protocol field compression negotiation</string>
</property>
@ -189,9 +180,6 @@
<property name="text">
<string>Disable adress control compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disable Address/Control compression in both directions</string>
</property>
@ -206,9 +194,6 @@
<property name="text">
<string>Do not use BSD compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Do not use BSD compression (disabled by default)</string>
</property>
@ -220,9 +205,6 @@
<property name="text">
<string>Use no IP b&amp;y default</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
<widget class="TQCheckBox" row="3" column="1">
<property name="name">
@ -231,9 +213,6 @@
<property name="text">
<string>Disable magic number negotiation</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disables the magic number negotiation</string>
</property>
@ -248,9 +227,6 @@
<property name="text">
<string>Disable TCP/IP header compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disables the Van Jacobson style TCP/IP header compression</string>
</property>
@ -265,9 +241,6 @@
<property name="text">
<string>Disable IPX</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disables the IPXCP and IPX protocols</string>
</property>
@ -295,9 +268,6 @@
<property name="text">
<string>Re&amp;quire MPPE</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Require Microsoft Point-To-Point Encrpytion (enabled by default)</string>
</property>
@ -309,9 +279,6 @@
<property name="text">
<string>Refuse &amp;40 bit encryption</string>
</property>
<property name="accel">
<string>Alt+4</string>
</property>
<property name="toolTip" stdset="0">
<string>Refuse 40 bit length encryption of MPPE</string>
</property>
@ -323,9 +290,6 @@
<property name="text">
<string>Refuse 1&amp;28 bit encryption</string>
</property>
<property name="accel">
<string>Alt+2</string>
</property>
<property name="toolTip" stdset="0">
<string>Refuse 128 bit length encryption of MPPE</string>
</property>
@ -337,9 +301,6 @@
<property name="text">
<string>Allo&amp;w MPPE stateful mode</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Check this for allow stateful mode of MPPE</string>
</property>
@ -351,9 +312,6 @@
<property name="text">
<string>Do not use &amp;MPPC compression</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not use the Microsoft Poit-To-Point Compression protocol. &lt;br&gt;I.e. for compatibility with watchguard firebox (disabled by default)</string>
</property>
@ -412,9 +370,6 @@
<property name="text">
<string>Re&amp;quire EAP</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Require EAP (disabled by default), should be disabled</string>
</property>

6
src/newprofilewizardpsk.ui
Unescape View File

@ -53,9 +53,6 @@
<property name="text">
<string>Sa&amp;ve PSK</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Save Pre-shared key in config file (or in TDEWallet if available)</string>
</property>
@ -177,9 +174,6 @@
<property name="text">
<string>&amp;Load PSK from file</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Pre-shared key (shared secret) is stored in a file (e.g. on a usbstick)</string>
</property>

12
src/newprofilewizardracoon.ui
Unescape View File

@ -90,9 +90,6 @@
<property name="text">
<string>Perfect forward secrec&amp;y (PFS):</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Use perfect forward secrety (PFS)</string>
</property>
@ -277,9 +274,6 @@ dh18 = modp8192 (only racoon)</string>
<property name="text">
<string>&amp;IKE DH group:</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="toolTip" stdset="0">
<string>Use special Diffie Hellman group</string>
</property>
@ -416,9 +410,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>&amp;Use Mode Configuration</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
</hbox>
</widget>
@ -437,9 +428,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>Authenticate &amp;with username and password (XAUTH)</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>enable this if you want enable the XAUTh extension</string>
</property>

30
src/newprofilewizardtypeselection.ui
Unescape View File

@ -61,9 +61,6 @@
<property name="text">
<string>&amp;Cisco (free)</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -75,9 +72,6 @@
<property name="text">
<string>&amp;L2TP over IPSec (Free/SWAN or Openswan)</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="TQRadioButton" row="6" column="0">
<property name="name">
@ -86,9 +80,6 @@
<property name="text">
<string>L2TP over IPSec (Linux 2.&amp;6 native or BSD)</string>
</property>
<property name="accel">
<string>Alt+6</string>
</property>
</widget>
<widget class="TQRadioButton" row="5" column="0">
<property name="name">
@ -97,9 +88,6 @@
<property name="text">
<string>&amp;Microsoft PPTP</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
</widget>
<widget class="TQRadioButton" row="4" column="0">
<property name="name">
@ -108,9 +96,6 @@
<property name="text">
<string>Open&amp;VPN</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
</widget>
<widget class="TQRadioButton" row="3" column="0">
<property name="name">
@ -119,9 +104,6 @@
<property name="text">
<string>IPSec (Linux &amp;2.6 native or BSD)</string>
</property>
<property name="accel">
<string>Alt+2</string>
</property>
</widget>
<widget class="TQRadioButton" row="2" column="0">
<property name="name">
@ -130,9 +112,6 @@
<property name="text">
<string>&amp;IPSec (Free/SWAN or Openswan)</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
</widget>
<widget class="TQRadioButton" row="1" column="0">
<property name="name">
@ -141,9 +120,6 @@
<property name="text">
<string>Cisco (propritar&amp;y)</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
<widget class="TQRadioButton" row="8" column="0">
<property name="name">
@ -152,9 +128,6 @@
<property name="text">
<string>&amp;Vtun</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
</widget>
<widget class="TQRadioButton" row="9" column="0">
<property name="name">
@ -163,9 +136,6 @@
<property name="text">
<string>&amp;SSH</string>
</property>
<property name="accel">
<string>Alt+S</string>
</property>
</widget>
</grid>
</widget>

9
src/newprofilewizarduser.ui
Unescape View File

@ -56,9 +56,6 @@
<property name="text">
<string>N&amp;T domain name for authentication:</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Use NT domain for authentication</string>
</property>
@ -169,9 +166,6 @@
<property name="text">
<string>Save &amp;user password</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Save user password in config file (or in TDEWallet if available)</string>
</property>
@ -183,9 +177,6 @@
<property name="text">
<string>Dont sa&amp;ve username</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not save the username in config nor TDEWallet</string>
</property>

21
src/profilecertoptionsbase.ui
Unescape View File

@ -66,9 +66,6 @@
<property name="text">
<string>Use e&amp;mail address as identifier</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
</widget>
<spacer>
<property name="name">
@ -121,9 +118,6 @@
<property name="text">
<string>Allo&amp;w empty private key passphrase</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
</widget>
</hbox>
</widget>
@ -317,9 +311,6 @@
<property name="text">
<string>Import p1&amp;2 Certificate...</string>
</property>
<property name="accel">
<string>Alt+2</string>
</property>
<property name="toolTip" stdset="0">
<string>Import a certificate in P12 format</string>
</property>
@ -439,9 +430,6 @@
<property name="text">
<string>Verify CA certificate of peer</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
</hbox>
</widget>
@ -460,9 +448,6 @@
<property name="text">
<string>Use &amp;Cisco certificate store</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
</widget>
<spacer>
<property name="name">
@ -579,9 +564,6 @@
<property name="text">
<string>&amp;Use special server certificate</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<spacer>
<property name="name">
@ -633,9 +615,6 @@
<property name="text">
<string>Save private ke&amp;y passphrase</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
<spacer>
<property name="name">

30
src/profileciscooptionsbase.ui
Unescape View File

@ -99,9 +99,6 @@
<property name="text">
<string>Application &amp;version:</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Send an own application version string</string>
</property>
@ -140,9 +137,6 @@
<property name="text">
<string>Use &amp;local port for ISAKMP:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<spacer>
<property name="name">
@ -198,9 +192,6 @@
<property name="text">
<string>Disable &amp;data encryption</string>
</property>
<property name="accel">
<string>Alt+D</string>
</property>
<property name="toolTip" stdset="0">
<string>disables the encrytion for data</string>
</property>
@ -342,9 +333,6 @@
<property name="text">
<string>Perfect for&amp;ward secrecy (PFS):</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Use perfect forward secrety (PFS)</string>
</property>
@ -409,9 +397,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>&amp;Use global IPSec secret</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Use global IPSec secret from /etc/vpnc/default.conf</string>
</property>
@ -464,9 +449,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>&amp;IKE DH group:</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="toolTip" stdset="0">
<string>Use special Diffie Hellman group</string>
</property>
@ -519,9 +501,6 @@ dh18 = modp8192 (only racoon)</string>
<property name="text">
<string>E&amp;nable interactive extended authentication</string>
</property>
<property name="accel">
<string>Alt+N</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -541,9 +520,6 @@ dh18 = modp8192 (only racoon)</string>
<property name="text">
<string>Allow empt&amp;y group password (insecure!)</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Allow an empty group password (not recommended, insecure)</string>
</property>
@ -619,9 +595,6 @@ dh18 = modp8192 (only racoon)</string>
<property name="text">
<string>Enable DPD idle ti&amp;meout:</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Use DPD (Dead Peer Detection)</string>
</property>
@ -689,9 +662,6 @@ dh18 = modp8192 (only racoon)</string>
<property name="text">
<string>Allow single DES encr&amp;yption</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Allow single DES encryption (insecure)</string>
</property>

3
src/profilecmdexecafterconnectoptionsbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>E&amp;xecute command after connect</string>
</property>
<property name="accel">
<string>Alt+X</string>
</property>
<property name="toolTip" stdset="0">
<string>Execute specified command after connect</string>
</property>

3
src/profilecmdexecafterdisconnectoptionsbase.ui
Unescape View File

@ -34,9 +34,6 @@
<property name="text">
<string>Execute co&amp;mmand after disconnect</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Execute specified command after disconnect</string>
</property>

3
src/profilecmdexecbeforeconnectoptionsbase.ui
Unescape View File

@ -34,9 +34,6 @@
<property name="text">
<string>Execu&amp;te command before connect</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Execute specified commands before connect</string>
</property>

3
src/profilecmdexecbeforedisconnectoptionsbase.ui
Unescape View File

@ -34,9 +34,6 @@
<property name="text">
<string>Execute comm&amp;and before disconnect</string>
</property>
<property name="accel">
<string>Alt+A</string>
</property>
<property name="toolTip" stdset="0">
<string>Execute specified command before disconnect</string>
</property>

12
src/profilegeneraloptionsbase.ui
Unescape View File

@ -137,9 +137,6 @@
<property name="text">
<string>Rena&amp;me</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Rename the current profile</string>
</property>
@ -151,9 +148,6 @@
<property name="text">
<string>Sa&amp;ve</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Save the current profile</string>
</property>
@ -165,9 +159,6 @@
<property name="text">
<string>Dele&amp;te</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Delete the current profile</string>
</property>
@ -179,9 +170,6 @@
<property name="text">
<string>Ne&amp;w</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Create a new profile</string>
</property>

45
src/profileipsecoptionsbase.ui
Unescape View File

@ -176,9 +176,6 @@
<property name="text">
<string>Use PFS</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Use perfect forward secrety (PFS)</string>
</property>
@ -243,9 +240,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>Use &amp;Mode Configuration</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
</widget>
<spacer>
<property name="name">
@ -289,9 +283,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>Use &amp;left next hop:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="TQCheckBox" row="1" column="0">
<property name="name">
@ -300,9 +291,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>&amp;Use right next hop:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="KLineEdit" row="0" column="1">
<property name="name">
@ -332,9 +320,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>Disable opportunistic encr&amp;yption</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
<spacer>
<property name="name">
@ -370,9 +355,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>Authenticate &amp;with username and password (XAUTH)</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>enable this if you want enable the XAUTh extension</string>
</property>
@ -517,9 +499,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>aes&amp;256-sha1</string>
</property>
<property name="accel">
<string>Alt+2</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -528,9 +507,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>aes&amp;128-sha1</string>
</property>
<property name="accel">
<string>Alt+1</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -539,9 +515,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>3des-sha1-modp2&amp;048</string>
</property>
<property name="accel">
<string>Alt+0</string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -550,9 +523,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>3des-sha1</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox">
<property name="name">
@ -561,9 +531,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>&amp;3des-md5</string>
</property>
<property name="accel">
<string>Alt+3</string>
</property>
</widget>
<widget class="TQLayoutWidget">
<property name="name">
@ -615,9 +582,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>Specify ESP</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<spacer>
<property name="name">
@ -684,9 +648,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>aes12&amp;8-sha1</string>
</property>
<property name="accel">
<string>Alt+8</string>
</property>
</widget>
<widget class="TQCheckBox" row="2" column="0">
<property name="name">
@ -695,9 +656,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>3des-sha1</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="3" column="0">
<property name="name">
@ -737,9 +695,6 @@ dh18 = modp8192 (racoon only)</string>
<property name="text">
<string>aes2&amp;56-sha1</string>
</property>
<property name="accel">
<string>Alt+5</string>
</property>
</widget>
</grid>
</widget>

27
src/profilenetworkgeneraloptionsbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>User defined &amp;MTU:</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Check this to set a custom MTU size</string>
</property>
@ -99,9 +96,6 @@
<property name="text">
<string>Userdefined M&amp;RU:</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
<property name="toolTip" stdset="0">
<string>Check this to set a custom MRU size</string>
</property>
@ -157,9 +151,6 @@
<property name="text">
<string>&amp;Use remote network</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<spacer>
<property name="name">
@ -266,9 +257,6 @@
<property name="text">
<string>Fix path mtu discovery problem</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Fixes the path mtu discovery problem by inserting a special firwall rule.</string>
</property>
@ -295,9 +283,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu
<property name="text">
<string>Update DNS configuration</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -617,9 +602,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu
<property name="text">
<string>&amp;Check connection status</string>
</property>
<property name="accel">
<string>Alt+C</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -659,9 +641,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu
<property name="text">
<string>Reconnect after connection &amp;lost</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="checked">
<bool>false</bool>
</property>
@ -811,9 +790,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu
<property name="text">
<string>Ping hostname/IP address:</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Use specified hostname/IP address instead the gateway address to test the connection status</string>
</property>
@ -880,9 +856,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu
<property name="text">
<string>Reconnect dela&amp;y:</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="checked">
<bool>false</bool>
</property>

6
src/profilenetworkhttpproxyoptionsbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>Use HTTP prox&amp;y</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Connect via HTTP proxy</string>
</property>
@ -333,9 +330,6 @@
<property name="text">
<string>Use HTTP prox&amp;y authentication</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Connect via HTTP proxy</string>
</property>

6
src/profilenetworknatoptionsbase.ui
Unescape View File

@ -58,9 +58,6 @@
<property name="text">
<string>&amp;Use UDP</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>For IPSec use UDP encapsulation. For openvpn &lt;br&gt;use UDP instead of TCP protocol.</string>
</property>
@ -128,9 +125,6 @@
<property name="text">
<string>UDP port for NAT-&amp;T:</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Use specified port number for IPSec NAT-T</string>
</property>

12
src/profilenetworkrouteoptionsbase.ui
Unescape View File

@ -87,9 +87,6 @@
<property name="text">
<string>&amp;Use additional network routes</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="TDEListView">
<column>
@ -187,9 +184,6 @@
<property name="text">
<string>Edit &amp;route...</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
<property name="toolTip" stdset="0">
<string>Add new route</string>
</property>
@ -204,9 +198,6 @@
<property name="text">
<string>Add &amp;route...</string>
</property>
<property name="accel">
<string>Alt+R</string>
</property>
<property name="toolTip" stdset="0">
<string>Add new route</string>
</property>
@ -221,9 +212,6 @@
<property name="text">
<string>De&amp;lete</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Delete route</string>
</property>

12
src/profilenetworkvirtualipoptionsbase.ui
Unescape View File

@ -85,9 +85,6 @@
<property name="text">
<string>Use vir&amp;tual IP addresses</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Use virtual IP addresses</string>
</property>
@ -163,9 +160,6 @@
<property name="text">
<string>Use &amp;local source IP:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="TQCheckBox" row="1" column="0">
<property name="name">
@ -174,9 +168,6 @@
<property name="text">
<string>&amp;Use remote source IP:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="KLineEdit" row="0" column="1">
<property name="name">
@ -206,9 +197,6 @@
<property name="text">
<string>&amp;Use virtual subnets:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
<widget class="KLineEdit">
<property name="name">

39
src/profileopenvpnoptionsbase.ui
Unescape View File

@ -77,9 +77,6 @@
<property name="text">
<string>Use specified &amp;local port:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Specify local (source) port to use</string>
</property>
@ -102,9 +99,6 @@
<property name="text">
<string>Disable L&amp;ZO compression</string>
</property>
<property name="accel">
<string>Alt+Z</string>
</property>
</widget>
<widget class="TQSpinBox" row="1" column="1">
<property name="name">
@ -133,9 +127,6 @@
<property name="text">
<string>Disable socket bind</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<widget class="TQCheckBox" row="4" column="0">
<property name="name">
@ -144,9 +135,6 @@
<property name="text">
<string>Allow IP address change of peer (for DHCP)</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -228,9 +216,6 @@
<property name="text">
<string>Use tunnel ping restart:</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Specify local (source) port to use</string>
</property>
@ -242,9 +227,6 @@
<property name="text">
<string>Use reneg-sec:</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -287,9 +269,6 @@
<property name="text">
<string>Frag&amp;ment packets bigger than:</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -378,9 +357,6 @@
<property name="text">
<string>Use tunnel ping:</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -591,9 +567,6 @@
<property name="text">
<string>Re&amp;quire peer ns cert type:</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Require that peer certificate was signed with an explicit nsCertType destination of "client" or "server"</string>
</property>
@ -608,9 +581,6 @@
<property name="text">
<string>Use only CA cert and authenticate with username and password</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Authenticate with server using username and password</string>
</property>
@ -622,9 +592,6 @@
<property name="text">
<string>Accept onl&amp;y peer with common name:</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Accept connections only from a host with X509 name &lt;br&gt;or common name equal to specified name</string>
</property>
@ -685,9 +652,6 @@
<property name="text">
<string>Authenticate &amp;with username and password</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -718,9 +682,6 @@
<property name="text">
<string>Use &amp;TLS auth</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Add an additional TLS authentication</string>
</property>

45
src/profilepptpoptionsbase.ui
Unescape View File

@ -74,9 +74,6 @@
<property name="text">
<string>Re&amp;quire MPPE</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Require Microsoft Point-To-Point Encrpytion (enabled by default)</string>
</property>
@ -88,9 +85,6 @@
<property name="text">
<string>A&amp;llow MPPE stateful mode</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Check this for allow stateful mode of MPPE</string>
</property>
@ -102,9 +96,6 @@
<property name="text">
<string>Refuse 4&amp;0 bit encryption</string>
</property>
<property name="accel">
<string>Alt+0</string>
</property>
<property name="toolTip" stdset="0">
<string>Refuse 40 bit length encryption of MPPE</string>
</property>
@ -116,9 +107,6 @@
<property name="text">
<string>Refuse &amp;128 bit encryption</string>
</property>
<property name="accel">
<string>Alt+1</string>
</property>
<property name="toolTip" stdset="0">
<string>Refuse 128 bit length encryption of MPPE</string>
</property>
@ -130,9 +118,6 @@
<property name="text">
<string>Do not use &amp;MPPC compression</string>
</property>
<property name="accel">
<string>Alt+M</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not use the Microsoft Poit-To-Point Compression protocol. &lt;br&gt;I.e. for compatibility with watchguard firebox (disabled by default)</string>
</property>
@ -197,9 +182,6 @@
<property name="text">
<string>Do not use deflate met&amp;hod</string>
</property>
<property name="accel">
<string>Alt+H</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not use deflate decompression method (disabled by default)</string>
</property>
@ -211,9 +193,6 @@
<property name="text">
<string>Disable CCP negotiation</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disable Compression Control Protocol negotiation</string>
</property>
@ -245,9 +224,6 @@
<property name="text">
<string>Disable IPX</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disables the IPXCP and IPX protocols</string>
</property>
@ -262,9 +238,6 @@
<property name="text">
<string>Use no IP b&amp;y default</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
</widget>
<widget class="TQCheckBox" row="1" column="0">
<property name="name">
@ -273,9 +246,6 @@
<property name="text">
<string>Do not use BSD compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Do not use BSD compression (disabled by default)</string>
</property>
@ -287,9 +257,6 @@
<property name="text">
<string>Disable TCP/IP header compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disables the Van Jacobson style TCP/IP header compression</string>
</property>
@ -304,9 +271,6 @@
<property name="text">
<string>Disable adress control compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disable Address/Control compression in both directions</string>
</property>
@ -321,9 +285,6 @@
<property name="text">
<string>Disable magic number negotiation</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disables the magic number negotiation</string>
</property>
@ -338,9 +299,6 @@
<property name="text">
<string>Disable protocol field compression</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Disable protocol field compression negotiation</string>
</property>
@ -428,9 +386,6 @@
<property name="text">
<string>Re&amp;quire EAP</string>
</property>
<property name="accel">
<string>Alt+Q</string>
</property>
<property name="toolTip" stdset="0">
<string>Require EAP (disabled by default), should be disabled</string>
</property>

6
src/profilepskoptionsbase.ui
Unescape View File

@ -164,9 +164,6 @@
<property name="text">
<string>&amp;Load PSK from file</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
<property name="toolTip" stdset="0">
<string>Pre-shared key (shared secret) is stored in a file (e.g. on a usbstick)</string>
</property>
@ -223,9 +220,6 @@
<property name="text">
<string>Sa&amp;ve PSK</string>
</property>
<property name="accel">
<string>Alt+V</string>
</property>
<property name="toolTip" stdset="0">
<string>Save Pre-shared key in config file (or in TDEWallet if available)</string>
</property>

12
src/profileracoonoptionsbase.ui
Unescape View File

@ -81,9 +81,6 @@
<property name="text">
<string>&amp;Use Mode Configuration</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
</widget>
</hbox>
</widget>
@ -207,9 +204,6 @@
<property name="text">
<string>Perfect forward secrec&amp;y (PFS):</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="toolTip" stdset="0">
<string>Use perfect forward secrety (PFS)</string>
</property>
@ -283,9 +277,6 @@
<property name="text">
<string>&amp;IKE DH group:</string>
</property>
<property name="accel">
<string>Alt+I</string>
</property>
<property name="toolTip" stdset="0">
<string>Use special Diffie Hellman group</string>
</property>
@ -814,9 +805,6 @@ dh18 = modp8192 (only racoon)</string>
<property name="text">
<string>Authenticate &amp;with username and password (XAUTH)</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>enable this if you want enable the XAUTh extension</string>
</property>

6
src/profilesmartcardoptionsbase.ui
Unescape View File

@ -66,9 +66,6 @@
<property name="text">
<string>Enable PKCS&amp;11 smartcard support</string>
</property>
<property name="accel">
<string>Alt+1</string>
</property>
<property name="toolTip" stdset="0">
<string></string>
</property>
@ -369,9 +366,6 @@
<property name="text">
<string>Use token provider &amp;library:</string>
</property>
<property name="accel">
<string>Alt+L</string>
</property>
</widget>
<widget class="KURLRequester">
<property name="name">

15
src/profilesshoptionsbase.ui
Unescape View File

@ -42,9 +42,6 @@
<property name="text">
<string>&amp;Use specified remote port:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Use non standard TCP/UDP port</string>
</property>
@ -103,9 +100,6 @@
<property name="text">
<string>&amp;Use network config script on server:</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Use non standard TCP/UDP port</string>
</property>
@ -155,9 +149,6 @@ Parameter 3: remote ip address 1.2.3.5 (tun)</string>
<property name="text">
<string>&amp;Key</string>
</property>
<property name="accel">
<string>Alt+K</string>
</property>
</widget>
<widget class="TQRadioButton" row="0" column="0">
<property name="name">
@ -166,9 +157,6 @@ Parameter 3: remote ip address 1.2.3.5 (tun)</string>
<property name="text">
<string>Pass&amp;word</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="checked">
<bool>true</bool>
</property>
@ -274,9 +262,6 @@ Parameter 3: remote ip address 1.2.3.5 (tun)</string>
<property name="text">
<string>autodetected ke&amp;y:</string>
</property>
<property name="accel">
<string>Alt+Y</string>
</property>
<property name="checked">
<bool>true</bool>
</property>

15
src/profileuseroptionsbase.ui
Unescape View File

@ -64,9 +64,6 @@
<property name="text">
<string>N&amp;T domain name:</string>
</property>
<property name="accel">
<string>Alt+T</string>
</property>
<property name="toolTip" stdset="0">
<string>Use NT domain for authentication</string>
</property>
@ -133,9 +130,6 @@
<property name="text">
<string>Dont save username</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>Do not save the username in config nor TDEWallet</string>
</property>
@ -234,9 +228,6 @@
<property name="text">
<string>Save &amp;user password</string>
</property>
<property name="accel">
<string>Alt+U</string>
</property>
<property name="toolTip" stdset="0">
<string>Save user password in config file (or in TDEWallet if available)</string>
</property>
@ -250,9 +241,6 @@
<property name="text">
<string>Hide group pass&amp;word field in account data dialog</string>
</property>
<property name="accel">
<string>Alt+W</string>
</property>
<property name="toolTip" stdset="0">
<string>Do not show group password field in dialog for request username/password.</string>
</property>
@ -267,9 +255,6 @@
<property name="text">
<string>Ask user password on each connect</string>
</property>
<property name="accel">
<string></string>
</property>
<property name="toolTip" stdset="0">
<string>If this option is enabled, on each connect the user password will be asked.</string>
</property>

3
src/profilevtunoptionsbase.ui
Unescape View File

@ -130,9 +130,6 @@
<property name="text">
<string>Use userdefined port:</string>
</property>
<property name="accel">
<string></string>
</property>
</widget>
<spacer>
<property name="name">

Write Preview
Loading…
Cancel
Save