diff --git a/src/addnetworkroutedialogbase.ui b/src/addnetworkroutedialogbase.ui index f7f4c96..6f26e62 100644 --- a/src/addnetworkroutedialogbase.ui +++ b/src/addnetworkroutedialogbase.ui @@ -227,9 +227,6 @@ Use gatewa&y - - Alt+Y - Use the gateway to reach this network @@ -285,9 +282,6 @@ Use &interface - - Alt+I - Use the gateway to reach this network diff --git a/src/advancedprofiledialogbase.ui b/src/advancedprofiledialogbase.ui index e612286..e407431 100644 --- a/src/advancedprofiledialogbase.ui +++ b/src/advancedprofiledialogbase.ui @@ -26,9 +26,6 @@ &Enable advanced settings - - Alt+E - Enable advanced settings for profile @@ -68,9 +65,6 @@ Allow single DES encr&yption - - Alt+Y - Allow single DES encryption (insecure) @@ -82,9 +76,6 @@ &IKE DH group: - - Alt+I - Use special Diffie Hellman group @@ -96,9 +87,6 @@ Perfect for&ward secrecy (PFS): - - Alt+W - Use perfect forward secrety (PFS) @@ -110,9 +98,6 @@ Application &version: - - Alt+V - Send an own application version string diff --git a/src/advancedprofilesettingsdialogbase.ui b/src/advancedprofilesettingsdialogbase.ui index a4ef090..1a93391 100644 --- a/src/advancedprofilesettingsdialogbase.ui +++ b/src/advancedprofilesettingsdialogbase.ui @@ -651,9 +651,6 @@ &OK - - - true @@ -671,9 +668,6 @@ &Cancel - - - true diff --git a/src/ciscocertificateenrollmentbase.ui b/src/ciscocertificateenrollmentbase.ui index db604e9..6871685 100644 --- a/src/ciscocertificateenrollmentbase.ui +++ b/src/ciscocertificateenrollmentbase.ui @@ -58,9 +58,6 @@ Fi&le - - Alt+L - @@ -209,9 +206,6 @@ &Online - - Alt+O - true diff --git a/src/configconnectoptionsbase.ui b/src/configconnectoptionsbase.ui index 119d206..5fb4953 100644 --- a/src/configconnectoptionsbase.ui +++ b/src/configconnectoptionsbase.ui @@ -42,9 +42,6 @@ &Minimize after connect - - Alt+M - true @@ -97,9 +94,6 @@ Use silent &quit - - Alt+Q - Enable exit without warning about the active connecions @@ -156,9 +150,6 @@ about the active connecions Au&tomatically connect at startup: - - Alt+T - true diff --git a/src/configdaemonoptionsbase.ui b/src/configdaemonoptionsbase.ui index 3747bfa..c9ebc35 100644 --- a/src/configdaemonoptionsbase.ui +++ b/src/configdaemonoptionsbase.ui @@ -61,9 +61,6 @@ A&ll programs are in PATH - - Alt+L - true @@ -95,9 +92,6 @@ Sho&w tunnel IP in tooltip - - Alt+W - Show retrieved IP address for tunnel in kvpnc icon tooltip @@ -644,9 +638,6 @@ cr&ypt - - Alt+Y - Show debug output from pppd @@ -661,9 +652,6 @@ &private - - Alt+P - Show debug output from pppd @@ -678,9 +666,6 @@ &klips - - Alt+K - Show debug output from pppd @@ -695,9 +680,6 @@ emitting - - - Show debug output from pppd @@ -712,9 +694,6 @@ &raw - - Alt+R - Show debug output from pppd @@ -729,9 +708,6 @@ &control - - Alt+C - Show debug output from pppd @@ -746,9 +722,6 @@ &parsing - - Alt+P - Show debug output from pppd @@ -804,9 +777,6 @@ spi - - - @@ -815,9 +785,6 @@ ah - - - @@ -826,9 +793,6 @@ esp - - - @@ -837,9 +801,6 @@ eroute - - - @@ -848,9 +809,6 @@ pfkey - - - @@ -859,9 +817,6 @@ radij - - - @@ -870,9 +825,6 @@ verbose - - - @@ -881,9 +833,6 @@ ipcomp - - - @@ -892,9 +841,6 @@ xform - - - @@ -903,9 +849,6 @@ &tunnel-xmit - - Alt+T - @@ -1113,9 +1056,6 @@ Do kill &racoon if still running - - Alt+R - @@ -1359,9 +1299,6 @@ Ena&ble pppd debug - - Alt+B - Show debug output from pppd @@ -1403,9 +1340,6 @@ Ena&ble pptpd debug - - Alt+B - Show debug output from pppd @@ -1874,9 +1808,6 @@ Enable l2tpd debug - - - Show debug output from pppd @@ -1891,9 +1822,6 @@ Do kill l&2tpd if still running - - Alt+2 - @@ -2035,9 +1963,6 @@ Do kill &xl2tpd if still running - - Alt+X - @@ -2058,9 +1983,6 @@ enable L2TP state debug - - - @@ -2069,9 +1991,6 @@ enable L2TP AVP debug - - - @@ -2080,9 +1999,6 @@ enable L2TP packet debug - - - @@ -2091,9 +2007,6 @@ enable L2TP network debug - - - @@ -2236,9 +2149,6 @@ Enable &openl2tp debug - - Alt+O - Show debug output from pppd diff --git a/src/configdebugoptionsbase.ui b/src/configdebugoptionsbase.ui index 5bde4a7..4eccf8e 100644 --- a/src/configdebugoptionsbase.ui +++ b/src/configdebugoptionsbase.ui @@ -42,9 +42,6 @@ S&how debug console - - Alt+H - Show the debug console in main window @@ -86,9 +83,6 @@ Write log &file - - Alt+F - Write logs to file: $HOME/.trinity/share/apps/kvpnc/kvpnc.log @@ -194,9 +188,6 @@ Keep connec&tion files - - Alt+T - Do not remove connection config files after use diff --git a/src/configgeneraloptions.ui b/src/configgeneraloptions.ui index 0306e92..e99fcb6 100644 --- a/src/configgeneraloptions.ui +++ b/src/configgeneraloptions.ui @@ -60,9 +60,6 @@ Use K&Wallet - - Alt+W - Use TDEWallet for secure store passwords @@ -104,9 +101,6 @@ Do not &quit by clicking close button - - Alt+Q - Close button minimizes to system tray <br>(kicker) instead of quit the program @@ -145,9 +139,6 @@ Hide on startup - - - Hides the KVpnc mainwindow on startup. KVpnc is still accessable vrom dock menu. diff --git a/src/configlogoptionsbase.ui b/src/configlogoptionsbase.ui index 01d3e1c..c8c7e09 100644 --- a/src/configlogoptionsbase.ui +++ b/src/configlogoptionsbase.ui @@ -100,9 +100,6 @@ Enable colori&zed log output - - Alt+Z - Enable color messages in the debug console (recommend) @@ -353,9 +350,6 @@ Chan&ge... - - Alt+G - Change color of this message type @@ -419,9 +413,6 @@ &Change... - - Alt+C - Change color of this message type @@ -485,9 +476,6 @@ &Change... - - Alt+C - Change color of this message type diff --git a/src/enterpassworddialogbase.ui b/src/enterpassworddialogbase.ui index 296d593..bd9fd87 100644 --- a/src/enterpassworddialogbase.ui +++ b/src/enterpassworddialogbase.ui @@ -247,9 +247,6 @@ Save &username - - Alt+U - Save username, shared secret and password <br>in config file or in TDEWallet @@ -261,9 +258,6 @@ Save PSK - - - Save username, shared secret and password <br>in config file or in TDEWallet @@ -275,9 +269,6 @@ Save password - - - Save username, shared secret and password <br>in config file or in TDEWallet diff --git a/src/enterxauthinteractivepasscodedialogbase.ui b/src/enterxauthinteractivepasscodedialogbase.ui index 0f5903e..f3c8b92 100644 --- a/src/enterxauthinteractivepasscodedialogbase.ui +++ b/src/enterxauthinteractivepasscodedialogbase.ui @@ -42,9 +42,6 @@ Save pass&word - - Alt+W - diff --git a/src/importcertificatedialogbase.ui b/src/importcertificatedialogbase.ui index e97c0c5..40b0554 100644 --- a/src/importcertificatedialogbase.ui +++ b/src/importcertificatedialogbase.ui @@ -237,9 +237,6 @@ Protect private key &with passphrase - - Alt+W - true diff --git a/src/importopenvpnprofiledialogbase.ui b/src/importopenvpnprofiledialogbase.ui index 984735f..d932eb6 100644 --- a/src/importopenvpnprofiledialogbase.ui +++ b/src/importopenvpnprofiledialogbase.ui @@ -66,9 +66,6 @@ open &profile manager after import - - Alt+P - diff --git a/src/importprofiledialogbase.ui b/src/importprofiledialogbase.ui index cf067ee..5768346 100644 --- a/src/importprofiledialogbase.ui +++ b/src/importprofiledialogbase.ui @@ -104,9 +104,6 @@ open &profile manager after import - - Alt+P - diff --git a/src/kvpncimportprofileselectiondialogbase.ui b/src/kvpncimportprofileselectiondialogbase.ui index b5c0a4b..10985a2 100644 --- a/src/kvpncimportprofileselectiondialogbase.ui +++ b/src/kvpncimportprofileselectiondialogbase.ui @@ -55,9 +55,6 @@ import &global settings - - Alt+G - @@ -66,9 +63,6 @@ open &profile manager after import - - Alt+P - @@ -175,9 +169,6 @@ Togg&le all - - Alt+L - @@ -186,9 +177,6 @@ &Import selected profiles - - Alt+I - diff --git a/src/logviewerdialogbase.ui b/src/logviewerdialogbase.ui index 9b7b73f..96b61ac 100644 --- a/src/logviewerdialogbase.ui +++ b/src/logviewerdialogbase.ui @@ -84,9 +84,6 @@ up&date - - Alt+D - @@ -108,9 +105,6 @@ &find - - Alt+F - diff --git a/src/mainviewbase.ui b/src/mainviewbase.ui index c7a68cf..5f39428 100644 --- a/src/mainviewbase.ui +++ b/src/mainviewbase.ui @@ -69,9 +69,6 @@ Connec&t - - Alt+T - true @@ -92,9 +89,6 @@ &Disconnect - - Alt+D - true diff --git a/src/manageciscocertbase.ui b/src/manageciscocertbase.ui index 29bfb2b..7340224 100644 --- a/src/manageciscocertbase.ui +++ b/src/manageciscocertbase.ui @@ -110,9 +110,6 @@ &Delete cert from cert store - - Alt+D - @@ -148,9 +145,6 @@ &Import certificate from file... - - Alt+I - diff --git a/src/newprofiledialogbase.ui b/src/newprofiledialogbase.ui index c15fa56..bc8cad2 100644 --- a/src/newprofiledialogbase.ui +++ b/src/newprofiledialogbase.ui @@ -40,9 +40,6 @@ Ad&vanced... - - Alt+V - Advanced settings (mostly not need) @@ -81,9 +78,6 @@ &Import Cisco PCF Profile... - - Alt+I - Import Cisco PCF profile @@ -95,9 +89,6 @@ Import p1&2 Certificate... - - Alt+2 - Import a certificate in P12 format @@ -213,9 +204,6 @@ &Save user password - - Alt+S - Save the user password in config file (or in TDEWallet if available) @@ -358,9 +346,6 @@ Save &group password - - Alt+G - Save the group password in config file (or in TDEWallet if available) diff --git a/src/newprofilewizardauthselection.ui b/src/newprofilewizardauthselection.ui index eae4f64..bf08620 100644 --- a/src/newprofilewizardauthselection.ui +++ b/src/newprofilewizardauthselection.ui @@ -37,9 +37,6 @@ Pre-shared ke&y (shared secret) - - Alt+Y - true @@ -51,9 +48,6 @@ &Certificate - - Alt+C - @@ -62,9 +56,6 @@ &Hybrid - - Alt+H - diff --git a/src/newprofilewizardcert.ui b/src/newprofilewizardcert.ui index 5629402..47afa88 100644 --- a/src/newprofilewizardcert.ui +++ b/src/newprofilewizardcert.ui @@ -50,9 +50,6 @@ Enable PKCS&11 smartcard support - - Alt+1 - @@ -288,9 +285,6 @@ &Use special server certificate - - Alt+U - @@ -423,9 +417,6 @@ Use token provider &library: - - Alt+L - diff --git a/src/newprofilewizardciscomanually.ui b/src/newprofilewizardciscomanually.ui index 24c58c4..b2de060 100644 --- a/src/newprofilewizardciscomanually.ui +++ b/src/newprofilewizardciscomanually.ui @@ -68,9 +68,6 @@ Save group &password - - Alt+P - Save the group password in config file (or in TDEWallet if available) @@ -107,9 +104,6 @@ A&llow empty group password (insecure!) - - Alt+L - Allow an empty group password (not recommended, insecure) diff --git a/src/newprofilewizardciscoselection.ui b/src/newprofilewizardciscoselection.ui index 633ff31..4be8e30 100644 --- a/src/newprofilewizardciscoselection.ui +++ b/src/newprofilewizardciscoselection.ui @@ -37,9 +37,6 @@ &Import PCF file - - Alt+I - true @@ -51,9 +48,6 @@ Enter data manuall&y - - Alt+Y - diff --git a/src/newprofilewizardconnectionstatuscheck.ui b/src/newprofilewizardconnectionstatuscheck.ui index c0e5deb..1ad1303 100644 --- a/src/newprofilewizardconnectionstatuscheck.ui +++ b/src/newprofilewizardconnectionstatuscheck.ui @@ -45,9 +45,6 @@ Use connection status c&heck - - Alt+H - true @@ -180,9 +177,6 @@ Reconnect after connection &lost - - Alt+L - true @@ -230,9 +224,6 @@ Use specified &address to ping: - - Alt+A - Use specified address instead the gateway address <br>to test the connection status diff --git a/src/newprofilewizardconnectoptions.ui b/src/newprofilewizardconnectoptions.ui index 836a59f..48cbb4b 100644 --- a/src/newprofilewizardconnectoptions.ui +++ b/src/newprofilewizardconnectoptions.ui @@ -42,9 +42,6 @@ Connect after creating ne&w profile - - Alt+W - @@ -80,9 +77,6 @@ &Connect automatically at startup: - - Alt+C - false diff --git a/src/newprofilewizardfreeswan.ui b/src/newprofilewizardfreeswan.ui index d9e5bae..1283a62 100644 --- a/src/newprofilewizardfreeswan.ui +++ b/src/newprofilewizardfreeswan.ui @@ -53,9 +53,6 @@ Authenticate &with username and password (XAUTH) - - Alt+W - enable this if you want enable the XAUTh extension @@ -94,9 +91,6 @@ Use &Mode Configuration - - Alt+M - @@ -122,9 +116,6 @@ Use Perfect for&ward secrecy (PFS) - - Alt+W - Use perfect forward secrety (PFS) @@ -312,9 +303,6 @@ aes25&6-sha1 - - Alt+6 - @@ -323,9 +311,6 @@ aes&128-sha1 - - Alt+1 - @@ -334,9 +319,6 @@ 3des-sha1-modp20&48 - - Alt+4 - @@ -345,9 +327,6 @@ 3des-sha1 - - - @@ -356,9 +335,6 @@ &3des-md5 - - Alt+3 - @@ -402,9 +378,6 @@ Use custom ESP - - - @@ -427,9 +400,6 @@ aes2&56-sha1 - - Alt+5 - @@ -438,9 +408,6 @@ aes12&8-sha1 - - Alt+8 - @@ -449,9 +416,6 @@ 3des-sha1 - - - @@ -505,9 +469,6 @@ &Use right next hop: - - Alt+U - @@ -524,9 +485,6 @@ Use &left next hop: - - Alt+L - @@ -692,9 +650,6 @@ Disable opportunistic encr&yption - - Alt+Y - diff --git a/src/newprofilewizardnat.ui b/src/newprofilewizardnat.ui index 5c89a0b..d487934 100644 --- a/src/newprofilewizardnat.ui +++ b/src/newprofilewizardnat.ui @@ -50,9 +50,6 @@ Use UDP - - - For IPSec use UDP encapsulation (NAT-T). For openvpn <br>use UDP instead of TCP protocol. @@ -111,9 +108,6 @@ &UDP Encapsulation Port: - - Alt+U - Use specified port number for IPSec NAT-T diff --git a/src/newprofilewizardnetwork.ui b/src/newprofilewizardnetwork.ui index e2a114a..8a73756 100644 --- a/src/newprofilewizardnetwork.ui +++ b/src/newprofilewizardnetwork.ui @@ -94,9 +94,6 @@ &Use remote network - - Alt+U - @@ -302,9 +299,6 @@ Userdefined &MTU: - - Alt+M - Check this to set a custom MTU size @@ -359,9 +353,6 @@ Userdefined M&RU: - - Alt+R - Check this to set a custom MTU size diff --git a/src/newprofilewizardnetworkroute.ui b/src/newprofilewizardnetworkroute.ui index 7414c45..ea0f8d0 100644 --- a/src/newprofilewizardnetworkroute.ui +++ b/src/newprofilewizardnetworkroute.ui @@ -87,9 +87,6 @@ &Use additional network routes - - Alt+U - @@ -187,9 +184,6 @@ Add &route... - - Alt+R - Add new route @@ -204,9 +198,6 @@ De&lete - - Alt+L - Delete route diff --git a/src/newprofilewizardopenvpn.ui b/src/newprofilewizardopenvpn.ui index 9517494..5b03185 100644 --- a/src/newprofilewizardopenvpn.ui +++ b/src/newprofilewizardopenvpn.ui @@ -92,9 +92,6 @@ Use TLS auth: - - - Add an additional TLS authentication @@ -190,9 +187,6 @@ Accept onl&y peer with common name: - - Alt+Y - Accept connections only from a host with X509 name <br>or common name equal to specified name @@ -231,9 +225,6 @@ Allow IP address change of peer (for DHCP) - - - @@ -289,9 +280,6 @@ Disable L&ZO compression - - Alt+Z - @@ -406,9 +394,6 @@ Re&quire peer ns cert type: - - Alt+Q - Require that peer certificate was signed with an explicit nsCertType destination of "client" or "server" @@ -540,9 +525,6 @@ Use &HTTP proxy - - Alt+H - Connect via HTTP proxy diff --git a/src/newprofilewizardopenvpnauth.ui b/src/newprofilewizardopenvpnauth.ui index fab006c..96ca7ae 100644 --- a/src/newprofilewizardopenvpnauth.ui +++ b/src/newprofilewizardopenvpnauth.ui @@ -59,9 +59,6 @@ Authenticate &with username and password - - Alt+W - Authenticate with server using username and password @@ -103,9 +100,6 @@ Use onl&y CA cert and authenticate with username and password - - Alt+Y - diff --git a/src/newprofilewizardopenvpnselection.ui b/src/newprofilewizardopenvpnselection.ui index aeccfcc..33bab90 100644 --- a/src/newprofilewizardopenvpnselection.ui +++ b/src/newprofilewizardopenvpnselection.ui @@ -37,9 +37,6 @@ Import &OpenVPN config file - - Alt+O - true @@ -51,9 +48,6 @@ Enter data &manually - - Alt+M - diff --git a/src/newprofilewizardp12certselection.ui b/src/newprofilewizardp12certselection.ui index 3cdd3ca..69effee 100644 --- a/src/newprofilewizardp12certselection.ui +++ b/src/newprofilewizardp12certselection.ui @@ -42,9 +42,6 @@ Enable PKCS11 s&martcard support - - Alt+M - @@ -70,9 +67,6 @@ &No - - Alt+N - @@ -81,9 +75,6 @@ &Yes - - Alt+Y - true diff --git a/src/newprofilewizardpptp.ui b/src/newprofilewizardpptp.ui index dd74e76..acab445 100644 --- a/src/newprofilewizardpptp.ui +++ b/src/newprofilewizardpptp.ui @@ -141,9 +141,6 @@ Disable CCP negotiation - - - Disable Compression Control Protocol negotiation @@ -158,9 +155,6 @@ Do not use deflate met&hod - - Alt+H - Do not use deflate decompression method (disabled by default) @@ -172,9 +166,6 @@ Disable protocol field compression - - - Disable protocol field compression negotiation @@ -189,9 +180,6 @@ Disable adress control compression - - - Disable Address/Control compression in both directions @@ -206,9 +194,6 @@ Do not use BSD compression - - - Do not use BSD compression (disabled by default) @@ -220,9 +205,6 @@ Use no IP b&y default - - Alt+Y - @@ -231,9 +213,6 @@ Disable magic number negotiation - - - Disables the magic number negotiation @@ -248,9 +227,6 @@ Disable TCP/IP header compression - - - Disables the Van Jacobson style TCP/IP header compression @@ -265,9 +241,6 @@ Disable IPX - - - Disables the IPXCP and IPX protocols @@ -295,9 +268,6 @@ Re&quire MPPE - - Alt+Q - Require Microsoft Point-To-Point Encrpytion (enabled by default) @@ -309,9 +279,6 @@ Refuse &40 bit encryption - - Alt+4 - Refuse 40 bit length encryption of MPPE @@ -323,9 +290,6 @@ Refuse 1&28 bit encryption - - Alt+2 - Refuse 128 bit length encryption of MPPE @@ -337,9 +301,6 @@ Allo&w MPPE stateful mode - - Alt+W - Check this for allow stateful mode of MPPE @@ -351,9 +312,6 @@ Do not use &MPPC compression - - Alt+M - Do not use the Microsoft Poit-To-Point Compression protocol. <br>I.e. for compatibility with watchguard firebox (disabled by default) @@ -412,9 +370,6 @@ Re&quire EAP - - Alt+Q - Require EAP (disabled by default), should be disabled diff --git a/src/newprofilewizardpsk.ui b/src/newprofilewizardpsk.ui index 6a84183..a1c59c4 100644 --- a/src/newprofilewizardpsk.ui +++ b/src/newprofilewizardpsk.ui @@ -53,9 +53,6 @@ Sa&ve PSK - - Alt+V - Save Pre-shared key in config file (or in TDEWallet if available) @@ -177,9 +174,6 @@ &Load PSK from file - - Alt+L - Pre-shared key (shared secret) is stored in a file (e.g. on a usbstick) diff --git a/src/newprofilewizardracoon.ui b/src/newprofilewizardracoon.ui index 4f324df..928f34b 100644 --- a/src/newprofilewizardracoon.ui +++ b/src/newprofilewizardracoon.ui @@ -90,9 +90,6 @@ Perfect forward secrec&y (PFS): - - Alt+Y - Use perfect forward secrety (PFS) @@ -277,9 +274,6 @@ dh18 = modp8192 (only racoon) &IKE DH group: - - Alt+I - Use special Diffie Hellman group @@ -416,9 +410,6 @@ dh18 = modp8192 (racoon only) &Use Mode Configuration - - Alt+U - @@ -437,9 +428,6 @@ dh18 = modp8192 (racoon only) Authenticate &with username and password (XAUTH) - - Alt+W - enable this if you want enable the XAUTh extension diff --git a/src/newprofilewizardtypeselection.ui b/src/newprofilewizardtypeselection.ui index a0ef233..e92ef22 100644 --- a/src/newprofilewizardtypeselection.ui +++ b/src/newprofilewizardtypeselection.ui @@ -61,9 +61,6 @@ &Cisco (free) - - Alt+C - true @@ -75,9 +72,6 @@ &L2TP over IPSec (Free/SWAN or Openswan) - - Alt+L - @@ -86,9 +80,6 @@ L2TP over IPSec (Linux 2.&6 native or BSD) - - Alt+6 - @@ -97,9 +88,6 @@ &Microsoft PPTP - - Alt+M - @@ -108,9 +96,6 @@ Open&VPN - - Alt+V - @@ -119,9 +104,6 @@ IPSec (Linux &2.6 native or BSD) - - Alt+2 - @@ -130,9 +112,6 @@ &IPSec (Free/SWAN or Openswan) - - Alt+I - @@ -141,9 +120,6 @@ Cisco (propritar&y) - - Alt+Y - @@ -152,9 +128,6 @@ &Vtun - - Alt+V - @@ -163,9 +136,6 @@ &SSH - - Alt+S - diff --git a/src/newprofilewizarduser.ui b/src/newprofilewizarduser.ui index 476be88..d454091 100644 --- a/src/newprofilewizarduser.ui +++ b/src/newprofilewizarduser.ui @@ -56,9 +56,6 @@ N&T domain name for authentication: - - Alt+T - Use NT domain for authentication @@ -169,9 +166,6 @@ Save &user password - - Alt+U - Save user password in config file (or in TDEWallet if available) @@ -183,9 +177,6 @@ Dont sa&ve username - - Alt+V - Do not save the username in config nor TDEWallet diff --git a/src/profilecertoptionsbase.ui b/src/profilecertoptionsbase.ui index d07e853..9a4f14c 100644 --- a/src/profilecertoptionsbase.ui +++ b/src/profilecertoptionsbase.ui @@ -66,9 +66,6 @@ Use e&mail address as identifier - - Alt+M - @@ -121,9 +118,6 @@ Allo&w empty private key passphrase - - Alt+W - @@ -317,9 +311,6 @@ Import p1&2 Certificate... - - Alt+2 - Import a certificate in P12 format @@ -439,9 +430,6 @@ Verify CA certificate of peer - - - @@ -460,9 +448,6 @@ Use &Cisco certificate store - - Alt+C - @@ -579,9 +564,6 @@ &Use special server certificate - - Alt+U - @@ -633,9 +615,6 @@ Save private ke&y passphrase - - Alt+Y - diff --git a/src/profileciscooptionsbase.ui b/src/profileciscooptionsbase.ui index 846fbc7..22ea41a 100644 --- a/src/profileciscooptionsbase.ui +++ b/src/profileciscooptionsbase.ui @@ -99,9 +99,6 @@ Application &version: - - Alt+V - Send an own application version string @@ -140,9 +137,6 @@ Use &local port for ISAKMP: - - Alt+L - @@ -198,9 +192,6 @@ Disable &data encryption - - Alt+D - disables the encrytion for data @@ -342,9 +333,6 @@ Perfect for&ward secrecy (PFS): - - Alt+W - Use perfect forward secrety (PFS) @@ -409,9 +397,6 @@ dh18 = modp8192 (racoon only) &Use global IPSec secret - - Alt+U - Use global IPSec secret from /etc/vpnc/default.conf @@ -464,9 +449,6 @@ dh18 = modp8192 (racoon only) &IKE DH group: - - Alt+I - Use special Diffie Hellman group @@ -519,9 +501,6 @@ dh18 = modp8192 (only racoon) E&nable interactive extended authentication - - Alt+N - @@ -541,9 +520,6 @@ dh18 = modp8192 (only racoon) Allow empt&y group password (insecure!) - - Alt+Y - Allow an empty group password (not recommended, insecure) @@ -619,9 +595,6 @@ dh18 = modp8192 (only racoon) Enable DPD idle ti&meout: - - Alt+M - Use DPD (Dead Peer Detection) @@ -689,9 +662,6 @@ dh18 = modp8192 (only racoon) Allow single DES encr&yption - - Alt+Y - Allow single DES encryption (insecure) diff --git a/src/profilecmdexecafterconnectoptionsbase.ui b/src/profilecmdexecafterconnectoptionsbase.ui index fb79067..6f4d88f 100644 --- a/src/profilecmdexecafterconnectoptionsbase.ui +++ b/src/profilecmdexecafterconnectoptionsbase.ui @@ -42,9 +42,6 @@ E&xecute command after connect - - Alt+X - Execute specified command after connect diff --git a/src/profilecmdexecafterdisconnectoptionsbase.ui b/src/profilecmdexecafterdisconnectoptionsbase.ui index e0cf971..1dc3f7e 100644 --- a/src/profilecmdexecafterdisconnectoptionsbase.ui +++ b/src/profilecmdexecafterdisconnectoptionsbase.ui @@ -34,9 +34,6 @@ Execute co&mmand after disconnect - - Alt+M - Execute specified command after disconnect diff --git a/src/profilecmdexecbeforeconnectoptionsbase.ui b/src/profilecmdexecbeforeconnectoptionsbase.ui index 29bb760..b964206 100644 --- a/src/profilecmdexecbeforeconnectoptionsbase.ui +++ b/src/profilecmdexecbeforeconnectoptionsbase.ui @@ -34,9 +34,6 @@ Execu&te command before connect - - Alt+T - Execute specified commands before connect diff --git a/src/profilecmdexecbeforedisconnectoptionsbase.ui b/src/profilecmdexecbeforedisconnectoptionsbase.ui index 485d6a7..4a345a6 100644 --- a/src/profilecmdexecbeforedisconnectoptionsbase.ui +++ b/src/profilecmdexecbeforedisconnectoptionsbase.ui @@ -34,9 +34,6 @@ Execute comm&and before disconnect - - Alt+A - Execute specified command before disconnect diff --git a/src/profilegeneraloptionsbase.ui b/src/profilegeneraloptionsbase.ui index 4a08ece..1d0ddd7 100644 --- a/src/profilegeneraloptionsbase.ui +++ b/src/profilegeneraloptionsbase.ui @@ -137,9 +137,6 @@ Rena&me - - Alt+M - Rename the current profile @@ -151,9 +148,6 @@ Sa&ve - - Alt+V - Save the current profile @@ -165,9 +159,6 @@ Dele&te - - Alt+T - Delete the current profile @@ -179,9 +170,6 @@ Ne&w - - Alt+W - Create a new profile diff --git a/src/profileipsecoptionsbase.ui b/src/profileipsecoptionsbase.ui index 5faedca..d4da5cd 100644 --- a/src/profileipsecoptionsbase.ui +++ b/src/profileipsecoptionsbase.ui @@ -176,9 +176,6 @@ Use PFS - - - Use perfect forward secrety (PFS) @@ -243,9 +240,6 @@ dh18 = modp8192 (racoon only) Use &Mode Configuration - - Alt+M - @@ -289,9 +283,6 @@ dh18 = modp8192 (racoon only) Use &left next hop: - - Alt+L - @@ -300,9 +291,6 @@ dh18 = modp8192 (racoon only) &Use right next hop: - - Alt+U - @@ -332,9 +320,6 @@ dh18 = modp8192 (racoon only) Disable opportunistic encr&yption - - Alt+Y - @@ -370,9 +355,6 @@ dh18 = modp8192 (racoon only) Authenticate &with username and password (XAUTH) - - Alt+W - enable this if you want enable the XAUTh extension @@ -517,9 +499,6 @@ dh18 = modp8192 (racoon only) aes&256-sha1 - - Alt+2 - @@ -528,9 +507,6 @@ dh18 = modp8192 (racoon only) aes&128-sha1 - - Alt+1 - @@ -539,9 +515,6 @@ dh18 = modp8192 (racoon only) 3des-sha1-modp2&048 - - Alt+0 - @@ -550,9 +523,6 @@ dh18 = modp8192 (racoon only) 3des-sha1 - - - @@ -561,9 +531,6 @@ dh18 = modp8192 (racoon only) &3des-md5 - - Alt+3 - @@ -615,9 +582,6 @@ dh18 = modp8192 (racoon only) Specify ESP - - - @@ -684,9 +648,6 @@ dh18 = modp8192 (racoon only) aes12&8-sha1 - - Alt+8 - @@ -695,9 +656,6 @@ dh18 = modp8192 (racoon only) 3des-sha1 - - - @@ -737,9 +695,6 @@ dh18 = modp8192 (racoon only) aes2&56-sha1 - - Alt+5 - diff --git a/src/profilenetworkgeneraloptionsbase.ui b/src/profilenetworkgeneraloptionsbase.ui index 9eb832f..edfb4e3 100644 --- a/src/profilenetworkgeneraloptionsbase.ui +++ b/src/profilenetworkgeneraloptionsbase.ui @@ -42,9 +42,6 @@ User defined &MTU: - - Alt+M - Check this to set a custom MTU size @@ -99,9 +96,6 @@ Userdefined M&RU: - - Alt+R - Check this to set a custom MRU size @@ -157,9 +151,6 @@ &Use remote network - - Alt+U - @@ -266,9 +257,6 @@ Fix path mtu discovery problem - - - Fixes the path mtu discovery problem by inserting a special firwall rule. @@ -295,9 +283,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu Update DNS configuration - - - true @@ -617,9 +602,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu &Check connection status - - Alt+C - true @@ -659,9 +641,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu Reconnect after connection &lost - - Alt+L - false @@ -811,9 +790,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu Ping hostname/IP address: - - - Use specified hostname/IP address instead the gateway address to test the connection status @@ -880,9 +856,6 @@ Diagnosis: path MTU discovery may not be working, due to hosts on the route refu Reconnect dela&y: - - Alt+Y - false diff --git a/src/profilenetworkhttpproxyoptionsbase.ui b/src/profilenetworkhttpproxyoptionsbase.ui index 53057b6..fad70b5 100644 --- a/src/profilenetworkhttpproxyoptionsbase.ui +++ b/src/profilenetworkhttpproxyoptionsbase.ui @@ -42,9 +42,6 @@ Use HTTP prox&y - - Alt+Y - Connect via HTTP proxy @@ -333,9 +330,6 @@ Use HTTP prox&y authentication - - Alt+Y - Connect via HTTP proxy diff --git a/src/profilenetworknatoptionsbase.ui b/src/profilenetworknatoptionsbase.ui index c73f764..0cc35ce 100644 --- a/src/profilenetworknatoptionsbase.ui +++ b/src/profilenetworknatoptionsbase.ui @@ -58,9 +58,6 @@ &Use UDP - - Alt+U - For IPSec use UDP encapsulation. For openvpn <br>use UDP instead of TCP protocol. @@ -128,9 +125,6 @@ UDP port for NAT-&T: - - Alt+T - Use specified port number for IPSec NAT-T diff --git a/src/profilenetworkrouteoptionsbase.ui b/src/profilenetworkrouteoptionsbase.ui index 6ea9206..a2f8865 100644 --- a/src/profilenetworkrouteoptionsbase.ui +++ b/src/profilenetworkrouteoptionsbase.ui @@ -87,9 +87,6 @@ &Use additional network routes - - Alt+U - @@ -187,9 +184,6 @@ Edit &route... - - Alt+R - Add new route @@ -204,9 +198,6 @@ Add &route... - - Alt+R - Add new route @@ -221,9 +212,6 @@ De&lete - - Alt+L - Delete route diff --git a/src/profilenetworkvirtualipoptionsbase.ui b/src/profilenetworkvirtualipoptionsbase.ui index 261bc8a..4374bff 100644 --- a/src/profilenetworkvirtualipoptionsbase.ui +++ b/src/profilenetworkvirtualipoptionsbase.ui @@ -85,9 +85,6 @@ Use vir&tual IP addresses - - Alt+T - Use virtual IP addresses @@ -163,9 +160,6 @@ Use &local source IP: - - Alt+L - @@ -174,9 +168,6 @@ &Use remote source IP: - - Alt+U - @@ -206,9 +197,6 @@ &Use virtual subnets: - - Alt+U - diff --git a/src/profileopenvpnoptionsbase.ui b/src/profileopenvpnoptionsbase.ui index 1ec58cf..9043671 100644 --- a/src/profileopenvpnoptionsbase.ui +++ b/src/profileopenvpnoptionsbase.ui @@ -77,9 +77,6 @@ Use specified &local port: - - Alt+L - Specify local (source) port to use @@ -102,9 +99,6 @@ Disable L&ZO compression - - Alt+Z - @@ -133,9 +127,6 @@ Disable socket bind - - - @@ -144,9 +135,6 @@ Allow IP address change of peer (for DHCP) - - - @@ -228,9 +216,6 @@ Use tunnel ping restart: - - - Specify local (source) port to use @@ -242,9 +227,6 @@ Use reneg-sec: - - - @@ -287,9 +269,6 @@ Frag&ment packets bigger than: - - Alt+M - @@ -378,9 +357,6 @@ Use tunnel ping: - - - @@ -591,9 +567,6 @@ Re&quire peer ns cert type: - - Alt+Q - Require that peer certificate was signed with an explicit nsCertType destination of "client" or "server" @@ -608,9 +581,6 @@ Use only CA cert and authenticate with username and password - - - Authenticate with server using username and password @@ -622,9 +592,6 @@ Accept onl&y peer with common name: - - Alt+Y - Accept connections only from a host with X509 name <br>or common name equal to specified name @@ -685,9 +652,6 @@ Authenticate &with username and password - - Alt+W - @@ -718,9 +682,6 @@ Use &TLS auth - - Alt+T - Add an additional TLS authentication diff --git a/src/profilepptpoptionsbase.ui b/src/profilepptpoptionsbase.ui index 207b956..7d545b7 100644 --- a/src/profilepptpoptionsbase.ui +++ b/src/profilepptpoptionsbase.ui @@ -74,9 +74,6 @@ Re&quire MPPE - - Alt+Q - Require Microsoft Point-To-Point Encrpytion (enabled by default) @@ -88,9 +85,6 @@ A&llow MPPE stateful mode - - Alt+L - Check this for allow stateful mode of MPPE @@ -102,9 +96,6 @@ Refuse 4&0 bit encryption - - Alt+0 - Refuse 40 bit length encryption of MPPE @@ -116,9 +107,6 @@ Refuse &128 bit encryption - - Alt+1 - Refuse 128 bit length encryption of MPPE @@ -130,9 +118,6 @@ Do not use &MPPC compression - - Alt+M - Do not use the Microsoft Poit-To-Point Compression protocol. <br>I.e. for compatibility with watchguard firebox (disabled by default) @@ -197,9 +182,6 @@ Do not use deflate met&hod - - Alt+H - Do not use deflate decompression method (disabled by default) @@ -211,9 +193,6 @@ Disable CCP negotiation - - - Disable Compression Control Protocol negotiation @@ -245,9 +224,6 @@ Disable IPX - - - Disables the IPXCP and IPX protocols @@ -262,9 +238,6 @@ Use no IP b&y default - - Alt+Y - @@ -273,9 +246,6 @@ Do not use BSD compression - - - Do not use BSD compression (disabled by default) @@ -287,9 +257,6 @@ Disable TCP/IP header compression - - - Disables the Van Jacobson style TCP/IP header compression @@ -304,9 +271,6 @@ Disable adress control compression - - - Disable Address/Control compression in both directions @@ -321,9 +285,6 @@ Disable magic number negotiation - - - Disables the magic number negotiation @@ -338,9 +299,6 @@ Disable protocol field compression - - - Disable protocol field compression negotiation @@ -428,9 +386,6 @@ Re&quire EAP - - Alt+Q - Require EAP (disabled by default), should be disabled diff --git a/src/profilepskoptionsbase.ui b/src/profilepskoptionsbase.ui index db488b0..102200e 100644 --- a/src/profilepskoptionsbase.ui +++ b/src/profilepskoptionsbase.ui @@ -164,9 +164,6 @@ &Load PSK from file - - Alt+L - Pre-shared key (shared secret) is stored in a file (e.g. on a usbstick) @@ -223,9 +220,6 @@ Sa&ve PSK - - Alt+V - Save Pre-shared key in config file (or in TDEWallet if available) diff --git a/src/profileracoonoptionsbase.ui b/src/profileracoonoptionsbase.ui index 3627da8..d8f78c1 100644 --- a/src/profileracoonoptionsbase.ui +++ b/src/profileracoonoptionsbase.ui @@ -81,9 +81,6 @@ &Use Mode Configuration - - Alt+U - @@ -207,9 +204,6 @@ Perfect forward secrec&y (PFS): - - Alt+Y - Use perfect forward secrety (PFS) @@ -283,9 +277,6 @@ &IKE DH group: - - Alt+I - Use special Diffie Hellman group @@ -814,9 +805,6 @@ dh18 = modp8192 (only racoon) Authenticate &with username and password (XAUTH) - - Alt+W - enable this if you want enable the XAUTh extension diff --git a/src/profilesmartcardoptionsbase.ui b/src/profilesmartcardoptionsbase.ui index ad9d54e..209f446 100644 --- a/src/profilesmartcardoptionsbase.ui +++ b/src/profilesmartcardoptionsbase.ui @@ -66,9 +66,6 @@ Enable PKCS&11 smartcard support - - Alt+1 - @@ -369,9 +366,6 @@ Use token provider &library: - - Alt+L - diff --git a/src/profilesshoptionsbase.ui b/src/profilesshoptionsbase.ui index 161662f..9d3a12c 100644 --- a/src/profilesshoptionsbase.ui +++ b/src/profilesshoptionsbase.ui @@ -42,9 +42,6 @@ &Use specified remote port: - - Alt+U - Use non standard TCP/UDP port @@ -103,9 +100,6 @@ &Use network config script on server: - - Alt+U - Use non standard TCP/UDP port @@ -155,9 +149,6 @@ Parameter 3: remote ip address 1.2.3.5 (tun) &Key - - Alt+K - @@ -166,9 +157,6 @@ Parameter 3: remote ip address 1.2.3.5 (tun) Pass&word - - Alt+W - true @@ -274,9 +262,6 @@ Parameter 3: remote ip address 1.2.3.5 (tun) autodetected ke&y: - - Alt+Y - true diff --git a/src/profileuseroptionsbase.ui b/src/profileuseroptionsbase.ui index 01c805b..e64899f 100644 --- a/src/profileuseroptionsbase.ui +++ b/src/profileuseroptionsbase.ui @@ -64,9 +64,6 @@ N&T domain name: - - Alt+T - Use NT domain for authentication @@ -133,9 +130,6 @@ Dont save username - - - Do not save the username in config nor TDEWallet @@ -234,9 +228,6 @@ Save &user password - - Alt+U - Save user password in config file (or in TDEWallet if available) @@ -250,9 +241,6 @@ Hide group pass&word field in account data dialog - - Alt+W - Do not show group password field in dialog for request username/password. @@ -267,9 +255,6 @@ Ask user password on each connect - - - If this option is enabled, on each connect the user password will be asked. diff --git a/src/profilevtunoptionsbase.ui b/src/profilevtunoptionsbase.ui index 875b3ee..e964250 100644 --- a/src/profilevtunoptionsbase.ui +++ b/src/profilevtunoptionsbase.ui @@ -130,9 +130,6 @@ Use userdefined port: - - -