Drop automake build support.

Rework the README and INSTALL files.

Signed-off-by: Slávek Banko <slavek.banko@axis.cz>
pull/3/head
Slávek Banko 3 years ago
parent c4d576ead5
commit 3537979536
No known key found for this signature in database
GPG Key ID: 608F5293A04BE668

3
.gitmodules vendored

@ -1,3 +0,0 @@
[submodule "admin"]
path = admin
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin

@ -1,167 +1,22 @@
Basic Installation Basic Installation
================== ==================
These are generic installation instructions. ktechlab relies on cmake to build.
The `configure' shell script attempts to guess correct values for Here are suggested default options:
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
to figure out how `configure' could check whether to do them, and mail -DCONFIG_INSTALL_DIR="/etc/trinity" \
diffs or instructions to the address given in the `README' so they can -DSYSCONF_INSTALL_DIR="/etc/trinity" \
be considered for the next release. If at some point `config.cache' -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
contains results you don't want to keep, you may remove or edit it. -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON" \
-DWITH_ALL_OPTIONS="ON"
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is: Requirements:
=============
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes a while. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Type `make install' to install the programs and any data files and
documentation.
4. You can remove the program binaries and object files from the
source code directory by typing `make clean'.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.
- gpsim

@ -1,5 +0,0 @@
AUTOMAKE_OPTIONS = foreign 1.5
include admin/deps.am
SUBDIRS=$(TOPSUBDIRS)

@ -0,0 +1,32 @@
KTechlab - circuit simulator for microcontrollers and electronics.
KTechlab is a circuit simulator with a nice, clickable and discoverable
interface. It supports many discrete components, logic circuits as well
as PIC programming in its own Basic dialect and some form of assembler.
.
Contributing
--------------
If you wish to contribute to ktechlab, you might do so:
- TDE Gitea Workspace (TGW) collaboration tool.
https://mirror.git.trinitydesktop.org/gitea
- TDE Weblate Translation Workspace (TWTW) collaboration tool.
https://mirror.git.trinitydesktop.org/weblate
Translations status
---------------------
### messages
[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/ktechlab/multi-auto.svg
"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/ktechlab/)
### desktop files
[![Translations status](https://mirror.git.trinitydesktop.org/weblate/widgets/applications/-/ktechlab-desktop-files/multi-auto.svg
"Engage in translating")](https://mirror.git.trinitydesktop.org/weblate/projects/applications/ktechlab-desktop-files/)

File diff suppressed because it is too large Load Diff

12435
aclocal.m4 vendored

File diff suppressed because it is too large Load Diff

@ -1 +0,0 @@
Subproject commit a7f75ac0ff587d5b8694a1b78557597161f8104c

1554
config.guess vendored

File diff suppressed because it is too large Load Diff

@ -1,262 +0,0 @@
/* config.h.in. Generated from configure.in by autoheader. */
/* Gpsim 0.21.11 was found */
#undef GPSIM_0_21_11
/* Gpsim 0.21.12 was found */
#undef GPSIM_0_21_12
/* Gpsim 0.21.4 was found */
#undef GPSIM_0_21_4
/* Gpsim 0.27.0 was found */
#undef GPSIM_0_27_0
/* Gpsim 0.31.0 was found */
#undef GPSIM_0_31_0
/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
#undef HAVE_CARBON_CARBON_H
/* Define if you have the CoreAudio API */
#undef HAVE_COREAUDIO
/* Define to 1 if you have the <crt_externs.h> header file. */
#undef HAVE_CRT_EXTERNS_H
/* Defines if your system has the crypt function */
#undef HAVE_CRYPT
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define if you have libjpeg */
#undef HAVE_LIBJPEG
/* Define if you have libpng */
#undef HAVE_LIBPNG
/* Define if you have a working libpthread (will enable threaded code) */
#undef HAVE_LIBPTHREAD
/* Define if you have libz */
#undef HAVE_LIBZ
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define if your system needs _NSGetEnviron to set up the environment */
#undef HAVE_NSGETENVIRON
/* Define if you have res_init */
#undef HAVE_RES_INIT
/* Define if you have the res_init prototype */
#undef HAVE_RES_INIT_PROTO
/* Define if you have a STL implementation by SGI */
#undef HAVE_SGI_STL
/* Define to 1 if you have the `snprintf' function. */
#undef HAVE_SNPRINTF
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define if you have strlcat */
#undef HAVE_STRLCAT
/* Define if you have the strlcat prototype */
#undef HAVE_STRLCAT_PROTO
/* Define if you have strlcpy */
#undef HAVE_STRLCPY
/* Define if you have the strlcpy prototype */
#undef HAVE_STRLCPY_PROTO
/* Define to 1 if you have the <sys/bitypes.h> header file. */
#undef HAVE_SYS_BITYPES_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the `vsnprintf' function. */
#undef HAVE_VSNPRINTF
/* Suffix for lib directories */
#undef KDELIBSUFF
/* Define a safe value for MAXPATHLEN */
#undef KDEMAXPATHLEN
/* Gpsim was not found */
#undef NO_GPSIM
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* The size of a `char *', as computed by sizeof. */
#undef SIZEOF_CHAR_P
/* The size of a `int', as computed by sizeof. */
#undef SIZEOF_INT
/* The size of a `long', as computed by sizeof. */
#undef SIZEOF_LONG
/* The size of a `short', as computed by sizeof. */
#undef SIZEOF_SHORT
/* The size of a `size_t', as computed by sizeof. */
#undef SIZEOF_SIZE_T
/* The size of a `unsigned long', as computed by sizeof. */
#undef SIZEOF_UNSIGNED_LONG
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Defined if compiling without arts */
#undef WITHOUT_ARTS
/* Define to 1 if your processor stores words with the most significant byte
first (like Motorola and SPARC, unlike Intel and VAX). */
#undef WORDS_BIGENDIAN
/*
* jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
* headers and I'm too lazy to write a configure test as long as only
* unixware is related
*/
#ifdef _UNIXWARE
#define HAVE_BOOLEAN
#endif
/*
* AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
* that defines bzero.
*/
#if defined(_AIX)
#include <strings.h>
#endif
#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
# include <sys/time.h>
# include <crt_externs.h>
# define environ (*_NSGetEnviron())
#endif
#if !defined(HAVE_RES_INIT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
int res_init(void);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCAT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcat(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCPY_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcpy(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
/*
* On HP-UX, the declaration of vsnprintf() is needed every time !
*/
#if !defined(HAVE_VSNPRINTF) || defined(hpux)
#if __STDC__
#include <stdarg.h>
#include <stdlib.h>
#else
#include <varargs.h>
#endif
#ifdef __cplusplus
extern "C"
#endif
int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
#ifdef __cplusplus
extern "C"
#endif
int snprintf(char *str, size_t n, char const *fmt, ...);
#endif
#if defined(__SVR4) && !defined(__svr4__)
#define __svr4__ 1
#endif
/* type to use in place of socklen_t if not defined */
#undef kde_socklen_t
/* type to use in place of socklen_t if not defined (deprecated, use
kde_socklen_t) */
#undef ksize_t

1679
config.sub vendored

File diff suppressed because it is too large Load Diff

@ -1,2 +0,0 @@
./admin/configure.in.min
configure.in.in

@ -1,264 +0,0 @@
dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(ktechlab, 0.3) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_TQT(3.2.0)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.2.0)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
################################
## BEGIN Check for gpsim 0.21 ##
################################
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ktechlab_save_CXXFLAGS="$CXXFLAGS"
AC_ARG_WITH(glib12, [ --with-glib12 force using glib 1.2.x [default=no]])
if test "x$with_glib12" != "xyes" ; then
glib_cflags=`pkg-config --cflags glib-2.0`
else
glib_cflags=`glib-config --cflags`
fi
AC_SUBST(glib_cflags)
CXXFLAGS="$glib_cflags"
AC_MSG_CHECKING([for gpsim 0.21.4 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); (void)load_symbol_file(0,0); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_4=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.11 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
#include <gpsim/symbol.h>
#include <gpsim/program_files.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_11=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.12 availability])
AC_TRY_COMPILE(
[
#include <gpsim/ValueCollections.h>
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_12=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.27.0 availability])
AC_TRY_COMPILE(
[
#include <gpsim/pic-processor.h>
void func() { pic_processor *Processor; sizeof(Processor->Wreg); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_27_0=yes,
AC_MSG_RESULT( no )
)
CXXFLAGS="$ktechlab_save_CXXFLAGS"
AC_LANG_RESTORE
##############################
## END Check for gpsim 0.21 ##
##############################
################################
## BEGIN DO_NOT_COMPILE CHECK ##
################################
if test x$have_gpsim_0_21_12 == xyes; then
AC_DEFINE([GPSIM_0_21_12],[],[Gpsim 0.21.12 was found])
CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS"
else
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
AC_DEFINE([NO_GPSIM],[],[Gpsim was not found])
LIB_GPSIM=""
else
AC_DEFINE([GPSIM_0_21_11],[],[Gpsim 0.21.11 was found])
fi
else
AC_DEFINE([GPSIM_0_21_4],[],[Gpsim 0.21.4 was found])
fi
fi
if test x$have_gpsim_0_21_4 == xyes || test x$have_gpsim_0_21_11 == xyes || test x$have_gpsim_0_21_12 == xyes; then
wi_cv_lib_readline=no
ac_save_LIBS="$LIBS"
# Note: $LIBCURSES is permitted to be empty.
for LIBREADLINE in "-lreadline" "-lreadline $LIBCURSES" "-lreadline -ltermcap" "-lreadline -lncurses" "-lreadline -lcurses"
do
LIBS="$ac_save_LIBS $LIBREADLINE"
LIB_GPSIM="$LIBREADLINE -lgpsim -lgpsim_eXdbm -lgpsimcli -lgpsimgui"
AC_TRY_RUN([
/* program */
#include <stdio.h>
#include <stdlib.h>
main(int argc, char **argv)
{
/* Note: don't actually call readline, since it may block;
* We just want to see if it (dynamic) linked in okay.
*/
if (argc == 0) /* never true */
readline(0);
exit(0);
}
],[
# action if true
wi_cv_lib_readline=yes
],[
# action if false
wi_cv_lib_readline=no
],[
# action if cross compiling
wi_cv_lib_readline=no
])
if test "$wi_cv_lib_readline" = yes ; then break ; fi
done
LIBS="$ac_save_LIBS"
fi
if test x$have_gpsim_0_27_0 == xyes; then
AC_DEFINE([GPSIM_0_27_0],[],[Gpsim 0.27.0 was found])
fi
AC_SUBST(LIB_GPSIM)
##############################
## END DO_NOT_COMPILE CHECK ##
##############################
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ icons/Makefile ])
AC_CONFIG_FILES([ icons/pics/Makefile ])
AC_CONFIG_FILES([ microbe/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_CONFIG_FILES([ src/core/Makefile ])
AC_CONFIG_FILES([ src/drawparts/Makefile ])
AC_CONFIG_FILES([ src/electronics/Makefile ])
AC_CONFIG_FILES([ src/electronics/components/Makefile ])
AC_CONFIG_FILES([ src/electronics/simulation/Makefile ])
AC_CONFIG_FILES([ src/flowparts/Makefile ])
AC_CONFIG_FILES([ src/gui/Makefile ])
AC_CONFIG_FILES([ src/languages/Makefile ])
AC_CONFIG_FILES([ src/mechanics/Makefile ])
AC_CONFIG_FILES([ src/micro/Makefile ])
AC_OUTPUT
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
echo ""
echo "################################################################################"
echo "# WARNING: gpsim support will not be compiled as gpsim >= 0.21.4 was not found #"
echo "################################################################################"
fi
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi

@ -1,180 +0,0 @@
#MIN_CONFIG(3.2.0)
KDE_ENABLE_HIDDEN_VISIBILITY
AM_INIT_AUTOMAKE(ktechlab, 0.3)
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
###################################
## BEGIN Check for gpsim version ##
###################################
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
ktechlab_save_CXXFLAGS="$CXXFLAGS"
AC_ARG_WITH(glib12, [ --with-glib12 force using glib 1.2.x [default=no]])
if test "x$with_glib12" != "xyes" ; then
glib_cflags=`pkg-config --cflags glib-2.0`
else
glib_cflags=`glib-config --cflags`
fi
AC_SUBST(glib_cflags)
CXXFLAGS="$glib_cflags"
AC_MSG_CHECKING([for gpsim 0.21.4 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); (void)load_symbol_file(0,0); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_4=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.11 availability])
AC_TRY_COMPILE(
[
#include <gpsim/interface.h>
#include <gpsim/gpsim_interface.h>
#include <gpsim/breakpoints.h>
#include <gpsim/gpsim_time.h>
#include <gpsim/symbol.h>
#include <gpsim/program_files.h>
void func() { (void)cycles; (void)initialize_gpsim_core(); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_11=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.21.12 availability])
AC_TRY_COMPILE(
[
#include <gpsim/ValueCollections.h>
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_21_12=yes,
AC_MSG_RESULT( no )
)
AC_MSG_CHECKING([for gpsim 0.27.0 availability])
AC_TRY_COMPILE(
[
#include <gpsim/pic-processor.h>
void func() { pic_processor *Processor; sizeof(Processor->Wreg); }
],
[],
AC_MSG_RESULT( yes )
have_gpsim_0_27_0=yes,
AC_MSG_RESULT( no )
)
CXXFLAGS="$glib_cflags $ktechlab_save_CXXFLAGS"
AC_MSG_CHECKING([if gpsim requires C++11])
AC_TRY_COMPILE(
[
#include <gpsim/gpsim_object.h>
void func() { gpsimObject *gpsimObj; sizeof(gpsimObj); }
],
[],
AC_MSG_RESULT( no ),
have_gpsim_0_31_0=yes
GPSIM_CXXFLAGS="-std=c++11"
AC_MSG_RESULT( yes )
)
CXXFLAGS="$ktechlab_save_CXXFLAGS"
AC_LANG_RESTORE
#################################
## END Check for gpsim version ##
#################################
################################
## BEGIN DO_NOT_COMPILE CHECK ##
################################
if test x$have_gpsim_0_21_12 == xyes; then
AC_DEFINE([GPSIM_0_21_12],[],[Gpsim 0.21.12 was found])
CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS"
else
if test x$have_gpsim_0_21_4 != xyes; then
if test x$have_gpsim_0_21_11 != xyes; then
AC_DEFINE([NO_GPSIM],[],[Gpsim was not found])
LIB_GPSIM=""
else
AC_DEFINE([GPSIM_0_21_11],[],[Gpsim 0.21.11 was found])
fi
else
AC_DEFINE([GPSIM_0_21_4],[],[Gpsim 0.21.4 was found])
fi
fi
if test x$have_gpsim_0_21_4 == xyes || test x$have_gpsim_0_21_11 == xyes || test x$have_gpsim_0_21_12 == xyes; then
wi_cv_lib_readline=no
ac_save_LIBS="$LIBS"
# Note: $LIBCURSES is permitted to be empty.
for LIBREADLINE in "-lreadline" "-lreadline $LIBCURSES" "-lreadline -ltermcap" "-lreadline -lncurses" "-lreadline -lcurses"
do
LIBS="$ac_save_LIBS $LIBREADLINE"
LIB_GPSIM="$LIBREADLINE -lgpsim -lgpsim_eXdbm -lgpsimcli -lgpsimgui"
AC_TRY_RUN([
/* program */
#include <stdio.h>
#include <stdlib.h>
main(int argc, char **argv)
{
/* Note: don't actually call readline, since it may block;
* We just want to see if it (dynamic) linked in okay.
*/
if (argc == 0) /* never true */
readline(0);
exit(0);
}
],[
# action if true
wi_cv_lib_readline=yes
],[
# action if false
wi_cv_lib_readline=no
],[
# action if cross compiling
wi_cv_lib_readline=no
])
if test "$wi_cv_lib_readline" = yes ; then break ; fi
done
LIBS="$ac_save_LIBS"
fi
if test x$have_gpsim_0_27_0 == xyes; then
AC_DEFINE([GPSIM_0_27_0],[],[Gpsim 0.27.0 was found])
fi
if test x$have_gpsim_0_31_0 == xyes; then
AC_DEFINE([GPSIM_0_31_0],[],[Gpsim 0.31.0 was found])
fi
AC_SUBST(LIB_GPSIM)
AC_SUBST(GPSIM_CXXFLAGS)
##############################
## END DO_NOT_COMPILE CHECK ##
##############################

@ -1,7 +0,0 @@
# the SUBDIRS is filled automatically by am_edit. If files are
# in this directory they are installed into the english dir
KDE_LANG = en
KDE_DOCS = AUTO
SUBDIRS = $(AUTODIRS)

@ -1,7 +0,0 @@
KDE_DOCS = ktechlab
# KDE_MANS = ktechlab
KDE_LANG = en
# KDE_DOCS = AUTO
kde_docs_KDEDOCS = debugging.docbook circuits.docbook flowcode.docbook \
quick.docbook faq.docbook picprograms.docbook

@ -1,6 +0,0 @@
METASOURCES = AUTO
KDE_ICON = AUTO
SUBDIRS = pics

@ -1,19 +0,0 @@
METASOURCES = AUTO
ktlicon_DATA = and.png cell.png logic_input.png logic_output.png nand.png \
nor.png not.png or.png xor.png current_source.png ground.png voltage.png \
capacitor.png led.png resistor.png signal_lamp.png seven_segment.png ammeter.png \
diode.png npn.png pnp.png voltmeter.png dpdt.png dpst.png ptb.png ptm.png \
spdt.png spst.png keypad.png opamp.png xnor.png circuit.png flowcode.png \
delay.png interrupt.png pinread.png pinwrite.png portread.png portwrite.png \
repeat.png while.png for.png assignment.png branch.png delay.png embed.png end.png \
interrupt.png pinread.png pinwrite.png portread.png portwrite.png \
repeat.png start.png sub.png subcall.png unary.png item.png ic1.png \
ic2.png ic3.png voltagesignal.png currentsignal.png clockinput.png cccs.png \
ccvs.png vcvs.png vccs.png mechanics.png buffer.png external_connection.png \
logicprobe.png potentiometer.png resistordip.png bidirled.png project_library.png \
project_program.png bus.png floatingprobe.png inductor.png matrixdisplay.png \
rotary.png
ktlicondir = $(kde_datadir)/ktechlab/icons

@ -1,10 +0,0 @@
INCLUDES = $(all_includes)
METASOURCES = AUTO
bin_PROGRAMS = microbe
microbe_LDFLAGS = $(all_libraries) $(KDE_RPATH) $(LIB_TQT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
microbe_SOURCES = btreebase.cpp btreenode.cpp main.cpp traverser.cpp \
expression.cpp pic14.cpp variable.cpp optimizer.cpp instruction.cpp microbe.cpp \
parser.cpp
noinst_HEADERS = btreebase.h btreenode.h traverser.h pic14.h variable.h \
optimizer.h microbe.h parser.h
microbe_LDADD = -lpthread $(LIB_TDEFILE)

@ -1 +0,0 @@
POFILES = AUTO

@ -1,88 +0,0 @@
## Makefile.am for ktechlab
# this is the program that gets installed. it's name is used for all
# of the other Makefile.am variables
bin_PROGRAMS = ktechlab
# set the include path for X, qt and KDE
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/drawparts \
-I$(top_srcdir)/src/electronics -I$(top_srcdir)/src/electronics/components \
-I$(top_srcdir)/src/electronics/simulation -I$(top_srcdir)/src/flowparts -I$(top_srcdir)/src/gui \
-I$(top_srcdir)/src/languages -I$(top_srcdir)/src/mechanics -I$(top_srcdir)/src/micro $(all_includes)
# the library search path.
ktechlab_LDFLAGS = -module $(all_libraries) $(KDE_RPATH) $(LIB_TQT) $(LIB_TDECORE) $(LIB_TDEUI) -lDCOP $(LIB_TDEPARTS) $(LIB_GPSIM)
# the libraries to link against.
ktechlab_LDADD = $(top_builddir)/src/gui/libgui.la \
$(top_builddir)/src/micro/libmicro.la $(top_builddir)/src/flowparts/libflowparts.la \
$(top_builddir)/src/mechanics/libmechanics.la $(top_builddir)/src/electronics/libelectronics.la \
$(top_builddir)/src/electronics/simulation/libelements.la $(top_builddir)/src/electronics/components/libcomponents.la \
$(top_builddir)/src/languages/liblanguages.la $(top_builddir)/src/drawparts/libdrawparts.la \
$(top_builddir)/src/core/libcore.la -ltdeutils -ltdetexteditor $(LIB_TDEFILE) $(LIB_TDEPRINT) $(LIB_TQT) $(LIB_GPSIM)
# which sources should be compiled for ktechlab
ktechlab_SOURCES = ktechlab.cpp node.cpp connector.cpp itemlibrary.cpp \
libraryitem.cpp projectmanager.cpp picitem.cpp variant.cpp canvasitemparts.cpp \
flowcontainer.cpp microsettings.cpp fpnode.cpp cells.cpp asmformatter.cpp conrouter.cpp \
nodegroup.cpp canvasmanipulator.cpp iteminterface.cpp itemgroup.cpp ciwidgetmgr.cpp \
filemetainfo.cpp resizeoverlay.cpp document.cpp view.cpp docmanager.cpp cnitem.cpp \
item.cpp cnitemgroup.cpp itemview.cpp itemdocument.cpp textview.cpp \
textdocument.cpp circuitdocument.cpp flowcodedocument.cpp icnview.cpp icndocument.cpp \
viewcontainer.cpp circuitview.cpp flowcodeview.cpp eventinfo.cpp oscilloscopedata.cpp \
itemdocumentdata.cpp docmanageriface.cpp documentiface.cpp viewiface.cpp \
docmanageriface.skel viewiface.skel documentiface.skel simulator.cpp katemdi.cpp \
debugmanager.cpp recentfilesaction.cpp variablelabel.cpp
ktechlab_PCH = AUTO
# these are the headers for your project
noinst_HEADERS = ktechlab.h node.h connector.h itemlibrary.h libraryitem.h \
projectmanager.h picitem.h canvasitemparts.h microsettings.h fpnode.h cells.h \
asmformatter.h conrouter.h nodegroup.h canvasmanipulator.h iteminterface.h itemgroup.h \
ciwidgetmgr.h filemetainfo.h resizeoverlay.h document.h view.h docmanager.h cnitem.h \
item.h cnitemgroup.h itemview.h itemdocument.h textview.h textdocument.h \
circuitdocument.h flowcodedocument.h icnview.h icndocument.h viewcontainer.h \
circuitview.h flowcodeview.h eventinfo.h oscilloscopedata.h itemdocumentdata.h \
docmanageriface.h documentiface.h viewiface.h simulator.h katemdi.h debugmanager.h \
recentfilesaction.h variablelabel.h
# client stuff
# let automoc handle all of the meta source files (moc)
METASOURCES = AUTO
messages: rc.cpp
$(EXTRACTRC) `find . -name "*.rc" -o -name "*.ui" -o -name "*.kcfg"` > rc.cpp
LIST=`find . -name \*.h -o -name \*.hh -o -name \*.H -o -name \*.hxx -o -name \*.hpp -o -name \*.cpp -o -name \*.cc -o -name \*.cxx -o -name \*.ecpp -o -name \*.C`; \
if test -n "$$LIST"; then \
$(XGETTEXT) $$LIST -o $(podir)/ktechlab.pot; \
fi
#KDE_ICON = ktechlab
#KDE_ICON = AUTO
# this is where the kdelnk file will go
kdelnkdir = $(kde_appsdir)/Development
kdelnk_DATA = ktechlab.desktop
# this is where the XML-GUI resource file goes
rcdir = $(kde_datadir)/ktechlab
rc_DATA = ktechlabui.rc error_messages_en_gb ktechlabcircuitui.rc \
ktechlabflowcodeui.rc ktechlabitemviewui.rc ktechlabmechanicsui.rc ktechlabtextui.rc ktechlabkateui.rc
SUBDIRS = core gui flowparts micro mechanics electronics languages drawparts
#iconsdir = $(kde_datadir)/ktechlab/icons
mimedir = $(kde_mimedir)/application
mime_DATA = x-circuit.desktop x-flowcode.desktop x-ktechlab.desktop x-microbe.desktop
EXTRA_DIST = $(mime_DATA)
katesyntaxdir = $(kde_datadir)/katepart/syntax
katesyntax_DATA = microbe.xml

@ -1,6 +0,0 @@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/drawparts -I$(top_srcdir)/src/electronics -I$(top_srcdir)/src/electronics/components -I$(top_srcdir)/src/electronics/simulation -I$(top_srcdir)/src/flowparts -I$(top_srcdir)/src/gui -I$(top_srcdir)/src/languages -I$(top_srcdir)/src/mechanics -I$(top_srcdir)/src/micro $(all_includes)
METASOURCES = AUTO
libcore_la_LDFLAGS = $(all_libraries)
noinst_LTLIBRARIES = libcore.la
kde_kcfg_DATA = ktechlab.kcfg
libcore_la_SOURCES = ktlconfig.kcfgc main.cpp

@ -1,6 +0,0 @@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/electronics -I$(top_srcdir)/src/electronics/components -I$(top_srcdir)/src/electronics/simulation -I$(top_srcdir)/src/flowparts -I$(top_srcdir)/src/gui -I$(top_srcdir)/src/languages -I$(top_srcdir)/src/mechanics -I$(top_srcdir)/src/micro $(all_includes)
METASOURCES = AUTO
noinst_LTLIBRARIES = libdrawparts.la
libdrawparts_la_SOURCES = drawpart.cpp dpline.cpp solidshape.cpp dptext.cpp
noinst_HEADERS = drawpart.h dpline.h solidshape.h dptext.h

@ -1,20 +0,0 @@
CXXFLAGS += $(GPSIM_CXXFLAGS)
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/electronics \
-I$(top_srcdir)/src/electronics/components -I$(top_srcdir)/src/electronics/simulation \
-I$(top_srcdir)/src/flowparts -I$(top_srcdir)/src/gui -I$(top_srcdir)/src/languages \
-I$(top_srcdir)/src/mechanics -I$(top_srcdir)/src/micro $(glib_cflags) $(all_includes)
METASOURCES = AUTO
SUBDIRS = simulation components
noinst_LTLIBRARIES = libelectronics.la
libelectronics_la_SOURCES = component.cpp subcircuits.cpp gpsimprocessor.cpp \
switch.cpp pin.cpp wire.cpp ecnode.cpp port.cpp
libelectronics_la_LIBADD = \
$(top_builddir)/src/electronics/simulation/libelements.la $(top_builddir)/src/electronics/components/libcomponents.la
noinst_HEADERS = gpsimprocessor.h switch.h pin.h wire.h ecnode.h port.h

@ -1,35 +0,0 @@
CXXFLAGS += $(GPSIM_CXXFLAGS)
INCLUDES = -I$(top_srcdir)/src \
-I$(top_srcdir)/src/electronics -I$(top_srcdir)/src/electronics/components \
-I$(top_srcdir)/src/electronics/simulation -I$(top_srcdir)/src/gui -I$(top_srcdir)/src/languages \
-I$(top_srcdir)/src/micro $(glib_cflags) $(all_includes)
METASOURCES = AUTO
noinst_HEADERS = ecresistor.h ecled.h ecdiode.h ecsevensegment.h eckeypad.h \
eccapacitor.h ec555.h eccurrentsource.h ecfixedvoltage.h ecbcdto7segment.h \
ecsignallamp.h ecclockinput.h ecpotentiometer.h ecopamp.h ecvoltagesource.h \
eccurrentsignal.h ecvoltagesignal.h ecground.h multiinputgate.h fulladder.h multiplexer.h \
demultiplexer.h externalconnection.h ecsubcircuit.h meter.h probe.h resistordip.h \
addac.h dependentsource.h flipflop.h toggleswitch.h pushswitch.h ram.h \
discretelogic.h piccomponent.h piccomponentpin.h binarycounter.h bidirled.h \
matrixdisplay.h bussplitter.h matrixdisplaydriver.h magnitudecomparator.h \
serialportcomponent.h parallelportcomponent.h inductor.h ecbjt.h rotoswitch.h
noinst_LTLIBRARIES = libcomponents.la
libcomponents_la_SOURCES = ecresistor.cpp ecled.cpp ecdiode.cpp \
ecsevensegment.cpp eckeypad.cpp eccapacitor.cpp ec555.cpp eccurrentsource.cpp \
ecfixedvoltage.cpp ecbcdto7segment.cpp ecsignallamp.cpp ecclockinput.cpp \
ecpotentiometer.cpp ecopamp.cpp ecvoltagesource.cpp eccurrentsignal.cpp ecvoltagesignal.cpp \
ecground.cpp multiinputgate.cpp fulladder.cpp multiplexer.cpp demultiplexer.cpp \
externalconnection.cpp ecsubcircuit.cpp meter.cpp probe.cpp resistordip.cpp addac.cpp \
dependentsource.cpp flipflop.cpp toggleswitch.cpp pushswitch.cpp ram.cpp discretelogic.cpp \
piccomponent.cpp piccomponentpin.cpp binarycounter.cpp bidirled.cpp matrixdisplay.cpp \
bussplitter.cpp matrixdisplaydriver.cpp magnitudecomparator.cpp serialportcomponent.cpp \
parallelportcomponent.cpp inductor.cpp ecbjt.cpp rotoswitch.cpp
libcomponents_la_PCH = AUTO
libcomponents_la_LIBADD =\
$(top_builddir)/src/electronics/simulation/libelements.la

@ -1,11 +0,0 @@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/electronics $(all_includes)
METASOURCES = AUTO
noinst_LTLIBRARIES = libelements.la
libelements_la_SOURCES = cccs.cpp ccvs.cpp circuit.cpp currentsource.cpp \
diode.cpp element.cpp elementset.cpp logic.cpp matrix.cpp vccs.cpp vcvs.cpp \
voltagesource.cpp capacitance.cpp resistance.cpp currentsignal.cpp voltagepoint.cpp \
voltagesignal.cpp elementsignal.cpp nonlinear.cpp reactive.cpp vec.cpp bjt.cpp opamp.cpp \
inductance.cpp
noinst_HEADERS = cccs.h ccvs.h circuit.h currentsource.h diode.h element.h \
elementset.h logic.h matrix.h vccs.h vcvs.h voltagesource.h capacitance.h \
resistance.h elementsignal.h nonlinear.h reactive.h vec.h bjt.h opamp.h inductance.h

@ -1,15 +0,0 @@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/electronics \
-I$(top_srcdir)/src/electronics/components -I$(top_srcdir)/src/gui -I$(top_srcdir)/src/languages \
-I$(top_srcdir)/src/micro $(all_includes)
METASOURCES = AUTO
noinst_LTLIBRARIES = libflowparts.la
noinst_HEADERS = callsub.h delay.h end.h forloop.h readport.h setpin.h start.h \
testpin.h unary.h varassignment.h varcomparison.h writeport.h repeat.h while.h \
sub.h inputbutton.h flowpart.h pinmapping.h
libflowparts_la_SOURCES = callsub.cpp delay.cpp end.cpp forloop.cpp \
readport.cpp setpin.cpp start.cpp testpin.cpp unary.cpp varassignment.cpp \
varcomparison.cpp writeport.cpp repeat.cpp while.cpp sub.cpp count.cpp embed.cpp \
interrupt.cpp keypad.cpp pulse.cpp sevenseg.cpp inputbutton.cpp flowpart.cpp \
pinmapping.cpp
libflowparts_la_PCH = AUTO

@ -1,23 +0,0 @@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/core \
-I$(top_srcdir)/src/electronics -I$(top_srcdir)/src/electronics/components \
-I$(top_srcdir)/src/electronics/simulation -I$(top_srcdir)/src/flowparts -I$(top_srcdir)/src/gui \
-I$(top_srcdir)/src/languages -I$(top_srcdir)/src/mechanics -I$(top_srcdir)/src/micro \
-I$(top_srcdir)/gpsim-interface $(all_includes)
METASOURCES = AUTO
noinst_LTLIBRARIES = libgui.la
libgui_la_SOURCES = contexthelp.cpp doublespinbox.cpp itemeditor.cpp \
itemselector.cpp microsettingsdlg.cpp newfiledlg.cpp orientationwidget.cpp \
outputmethoddlg.cpp pieditor.cpp plvitem.cpp propertieslistview.cpp asmformattingwidget.ui \
gpasmsettingswidget.ui logicwidget.ui newfilewidget.ui newprojectwidget.ui \
outputmethodwidget.ui microsettingswidget.ui settingsdlg.cpp oscilloscope.cpp \
oscilloscopewidget.ui oscilloscopeview.cpp probepositioner.cpp generaloptionswidget.ui \
logview.cpp createsubprojectwidget.ui processingoptionswidget.ui \
sdccoptionswidget.ui projectdlgs.cpp linkeroptionswidget.ui microselectwidget.cpp \
symbolviewer.cpp picprogrammerconfigwidget.ui newpinmappingwidget.ui programmerwidget.ui \
programmerdlg.cpp colorcombo.cpp
libgui_la_PCH = AUTO
noinst_HEADERS = settingsdlg.h oscilloscope.h oscilloscopeview.h \
probepositioner.h projectdlgs.h microselectwidget.h symbolviewer.h programmerdlg.h \
colorcombo.h

@ -1,14 +0,0 @@
INCLUDES = -I$(top_srcdir)/src \
-I$(top_srcdir)/src/electronics -I$(top_srcdir)/src/electronics/components \
-I$(top_srcdir)/src/electronics/simulation -I$(top_srcdir)/src/flowparts -I$(top_srcdir)/src/gui \
-I$(top_srcdir)/src/languages -I$(top_srcdir)/src/mechanics -I$(top_srcdir)/src/micro -Igui \
$(all_includes)
METASOURCES = AUTO
noinst_LTLIBRARIES = liblanguages.la
liblanguages_la_SOURCES = language.cpp languagemanager.cpp microbe.cpp \
externallanguage.cpp gpasm.cpp gpdasm.cpp processchain.cpp flowcode.cpp asmparser.cpp \
sdcc.cpp gplink.cpp gplib.cpp sourceline.cpp picprogrammer.cpp
noinst_HEADERS = externallanguage.h gpasm.h gpdasm.h language.h \
languagemanager.h microbe.h processchain.h flowcode.h asmparser.h sdcc.h gplink.h gplib.h \
sourceline.h picprogrammer.h
liblanguages_la_LIBADD = $(top_builddir)/src/gui/libgui.la

@ -1,8 +0,0 @@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/src/drawparts $(all_includes)
METASOURCES = AUTO
noinst_HEADERS = mechanicsitem.h chassiscircular2.h mechanicssimulation.h \
mechanicsdocument.h mechanicsgroup.h mechanicsview.h
noinst_LTLIBRARIES = libmechanics.la
libmechanics_la_SOURCES = mechanicsitem.cpp chassiscircular2.cpp \
mechanicssimulation.cpp mechanicsdocument.cpp mechanicsgroup.cpp mechanicsview.cpp

@ -1,7 +0,0 @@
INCLUDES = $(all_includes)
METASOURCES = AUTO
noinst_LTLIBRARIES = libmicro.la
noinst_HEADERS = microinfo.h picinfo.h picinfo16bit.h picinfo14bit.h \
picinfo12bit.h microlibrary.h asminfo.h
libmicro_la_SOURCES = microinfo.cpp picinfo.cpp picinfo16bit.cpp \
picinfo14bit.cpp picinfo12bit.cpp microlibrary.cpp micropackage.cpp asminfo.cpp

@ -1,5 +0,0 @@
doc
icons
microbe
po
src
Loading…
Cancel
Save