Drop automake build support.

Add basic cmake build instructions. Delete *.spec files. Delete the NEWS file. Rework of the README file. Signed-off-by: gregory guy <gregory-tde@laposte.net> (cherry picked from commit 1308547df8)
5 years ago · 7f6e5e66e8
parent 2ef205291e
commit 7f6e5e66e8
31 changed files with 37 additions and 13948 deletions
--- a/.gitmodules
+++ b/.gitmodules
@ -1,6 +1,3 @@
 [submodule "admin"]
 	path = admin
 	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin
 [submodule "cmake"]
 	path = cmake
 	url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake
--- a/185
+++ b/185
@ -1,180 +1,17 @@
 Cool Installation ;-)
 =====================
 Run ./Setup
 Gentoo ebuild installation (.ebuild file)
 =========================================
 1. Be sure, $PORTDIR_OVERLAY is set in /etc/make.conf
   (usually, it's /usr/local/portage)
 2. Extract the content of the .tar.gz to $PORTDIR_OVERLAY
 3. Execute "emerge kshutdown" as root.
 Basic Installation
 ==================
-   These are generic installation instructions.
+Kshutdown relies on cmake to build.
   The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
 you can run in the future to recreate the current configuration, a file
 `config.cache' that saves the results of its tests to speed up
 reconfiguring, and a file `config.log' containing compiler output
 (useful mainly for debugging `configure').
   If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
 be considered for the next release.  If at some point `config.cache'
 contains results you don't want to keep, you may remove or edit it.
   The file `configure.in' is used to create `configure' by a program
 called `autoconf'.  You only need `configure.in' if you want to change
 it or regenerate `configure' using a newer version of `autoconf'.
 The simplest way to compile this package is:
  1. `cd' to the directory containing the package's source code and type
     `./configure' to configure the package for your system.  If you're
     using `csh' on an old version of System V, you might need to type
     `sh ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.
     Running `configure' takes a while.  While running, it prints some
     messages telling which features it is checking for.
  2. Type `make' to compile the package.
  3. Type `make install' to install the programs and any data files and
     documentation.
  4. You can remove the program binaries and object files from the
     source code directory by typing `make clean'.
 Compilers and Options
 =====================
   Some systems require unusual options for compilation or linking that
 the `configure' script does not know about.  You can give `configure'
 initial values for variables by setting them in the environment.  Using
 a Bourne-compatible shell, you can do that on the command line like
 this:
     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
 Or on systems that have the `env' program, you can do it like this:
     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
 Compiling For Multiple Architectures
 ====================================
   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you must use a version of `make' that
 supports the `VPATH' variable, such as GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
   If you have to use a `make' that does not supports the `VPATH'
 variable, you have to compile the package for one architecture at a time
 in the source code directory.  After you have installed the package for
 one architecture, use `make distclean' before reconfiguring for another
 architecture.
 Installation Names
 ==================
   By default, `make install' will install the package's files in
 `/usr/local/bin', `/usr/local/man', etc.  You can specify an
 installation prefix other than `/usr/local' by giving `configure' the
 option `--prefix=PATH'.
   You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
 give `configure' the option `--exec-prefix=PATH', the package will use
 PATH as the prefix for installing programs and libraries.
 Documentation and other data files will still use the regular prefix.
   If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 Optional Features
 =================
   Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
 `README' should mention any `--enable-' and `--with-' options that the
 package recognizes.
   For packages that use the X Window System, `configure' can usually
 find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 Specifying the System Type
 ==========================
   There may be some features `configure' can not figure out
 automatically, but needs to determine by the type of host the package
 will run on.  Usually `configure' can figure that out, but if it prints
 a message saying it can not guess the host type, give it the
 `--host=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name with three fields:
     CPU-COMPANY-SYSTEM
 See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
 need to know the host type.
   If you are building compiler tools for cross-compiling, you can also
 use the `--target=TYPE' option to select the type of system they will
 produce code for and the `--build=TYPE' option to select the type of
 system on which you are compiling the package.
 Sharing Defaults
 ================
   If you want to set default values for `configure' scripts to share,
 you can create a site shell script called `config.site' that gives
 default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 Operation Controls
 ==================
   `configure' recognizes the following options to control how it
 operates.
 `--cache-file=FILE'
     Use and save the results of the tests in FILE instead of
     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
     debugging `configure'.
 `--help'
     Print a summary of the options to `configure', and exit.
 `--quiet'
 `--silent'
 `-q'
     Do not print messages saying which checks are being made.
-`--srcdir=DIR'
+Here are suggested default options:
     Look for the package's source code in directory DIR.  Usually
     `configure' can determine that directory automatically.
-`--version'
+ -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
-     Print the version of Autoconf used to generate the `configure'
+ -DCONFIG_INSTALL_DIR="/etc/trinity" \
-     script, and exit.
+ -DSYSCONF_INSTALL_DIR="/etc/trinity" \
 -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
 -DCMAKE_BUILD_TYPE=RelWithDebInfo \
 -DCMAKE_VERBOSE_MAKEFILE="ON" \
 -DCMAKE_SKIP_RPATH="OFF" \
 -DBUILD_ALL="ON" \
 -DWITH_ALL_OPTIONS="ON"
 `configure' also accepts some other, not widely useful, options.
--- a/Makefile.am
+++ b/Makefile.am
@ -1,23 +0,0 @@
 SUBDIRS = doc extras karamba kshutdown kshutdownlockout pics po sounds
 EXTRA_DIST = admin AUTHORS COPYING INSTALL README Setup TODO VERSION ChangeLog kshutdown.lsm NEWS
 AUTOMAKE_OPTIONS = foreign
 $(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
 	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in
 $(top_srcdir)/subdirs:
 	cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
 $(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
 	cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
 MAINTAINERCLEANFILES = acinclude.m4 configure.files configure.in subdirs
 package-messages:
 	$(MAKE) -f admin/Makefile.common package-messages
 	$(MAKE) -C po merge
 dist-hook:
 	cd $(top_distdir) && perl admin/am_edit -padmin
 	cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
--- a/1
+++ b/1
@ -1 +0,0 @@
 See: http://kshutdown.sourceforge.net/releases/
--- a/55
+++ b/55
@ -1,33 +1,30 @@
-KShutDown is an advanced shut down utility for TDE.
+ KShutDown is an advanced shut down utility for TDE.
 Odd numbers in version mean it's unstable/beta (e.g. 0.7.1, 0.9).
 Even numbers mean it's stable (e.g. 0.8, 0.10.5).
 FEATURES
--------
+========
- Turn Off Computer (logout and halt the system)
+
- Restart Computer (logout and reboot the system)
+* Turn Off Computer (logout and halt the system)
- Lock Session (lock the screen using a screen saver)
+* Restart Computer (logout and reboot the system)
- End Current Session (end the current TDE session and logout the user)
+* Lock Session (lock the screen using a screen saver)
- Extras (additional, user commands)
+* End Current Session (end the current TDE session and logout the user)
- Time and delay options
+* Extras (additional, user commands)
- Command line and DCOP support
+* Time and delay options
- System tray and panel applet
+* Command line and DCOP support
- Visual and sound notifications
+* System tray and panel applet
- TDE Kiosk support
+* Visual and sound notifications
- And more...
+* TDE Kiosk support
-
+
-LINKS
+
-----
+
-http://kshutdown.sourceforge.net  (Home Page)
+ CONTRIBUTING
-http://sourceforge.net/projects/kshutdown  (Project Page)
+==============
-http://freshmeat.net/projects/kshutdown  (freshmeat.net Page)
+
-http://www.kde-apps.org/content/show.php?content=9754  (KDE-Apps.org Page)
+If you wish to contribute to Kshutdown (TDE), you might do so:
-http://www.kde.org  (KDE Home Page)
+
-
+- TDE Gitea Workspace (TGW) collaboration tool.
-COPYRIGHT & LICENSE
+  https://mirror.git.trinitydesktop.org/gitea
-------------------
+
-(C) Konrad Twardowski <kdtonline@poczta.onet.pl>
+- TDE Weblate Translation Workspace (TWTW) collaboration tool.
-KShutDown is licensed under the GNU General Public License (GPL)
+  https://mirror.git.trinitydesktop.org/weblate
 (http://www.gnu.org/licenses/gpl.html)
--- a/266
+++ b/266
@ -1,266 +0,0 @@
 #!/bin/bash
 # TODO: 2.0: use kdialog
 META_FULL_NAME="KShutDown"
 META_VERSION="`cat VERSION`"
 #if [[ (("$TERM" == "dumb") || ("$TERM" == "xterm")) && ("${1}" != "--launch-in-konsole") ]]; then
 #	echo
 #	echo "Press Ctrl+C to exit $META_FULL_NAME installer"
 #	konsole --notabbar --notoolbar --workdir `dirname "${0}"` -T "$META_FULL_NAME Installer" -e ${0} --launch-in-konsole
 #	exit
 #fi
 # installation dirs
 DEFAULT_DIR=`tde-config --prefix`
 if [ -z "$DEFAULT_DIR" ]; then
 	DEFAULT_DIR="/usr"
 fi
 INSTALL_DIR="$DEFAULT_DIR"
 # colors
 DEF_C="\E[37;40m"
 KEY_C="\E[31;40m"
 # configure options
 CONFIGURE_OPTIONS=""
 FAST_COMPILATION="true"
 # i18n
 # english
 I18N_TITLE_DOCS="Documentation and License"
 I18N_TITLE_SETUP="Compilation and Installation"
 I18N_CHANGE_DIR="Change installation directory (prefix)"
 I18N_DISABLE_FAST="Disable fast compilation"
 I18N_ENABLE_FAST="Enable fast compilation"
 I18N_INSTALL="Install"
 I18N_LICENSE="License"
 I18N_NEWS="What's new? (q - quit)"
 I18N_PRESS_ENTER="Press <Enter> to exit"
 I18N_QUIT="Quit"
 I18N_THANKS="Thank you for using"
 I18N_MENU="K Menu: Accessories -> KShutDown"
 I18N_CONF_WITH="Configuring with"
 I18N_INST_FAILED="Installation failed!"
 I18N_COMP_FAILED="Compilation failed!"
 I18N_CONF_FAILED="Configuration failed!"
 I18N_COMP_START="Compiling..."
 I18N_MINU="       This may take a few minutes."
 I18N_MISSING_DEPEN1="Make sure you have installed the 'tdelibs-devel' package"
 I18N_MISSING_DEPEN2="       which is required to compile any KDE application."
 I18N_ENTER_DIR="Enter a new prefix"
 I18N_SETUP="Setup"
 I18N_README="Readme"
 # polish
 if [[ ("$LANG" == "pl_PL.UTF-8") || ("$LANG" == "pl_PL") || ("$LANG" == "pl") ]]; then
 	I18N_TITLE_DOCS="Dokumentacja i licencja"
 	I18N_TITLE_SETUP="Kompilacja i instalacja"
 	I18N_CHANGE_DIR="Zmien katalog instalacji (prefix)"
 	I18N_DISABLE_FAST="Wylacz szybka kompilacje"
 	I18N_ENABLE_FAST="Wlacz szybka kompilacje"
 	I18N_INSTALL="Instaluj"
 	I18N_LICENSE="Licencja"
 	I18N_NEWS="Co nowego? (q - wyjscie)"
 	I18N_PRESS_ENTER="Nacisnij <Enter>, aby wyjsc"
 	I18N_QUIT="Zakoncz"
 	I18N_THANKS="Dziekujemy za uzycie"
 	I18N_MENU="Menu K: Akcesoria -> KShutDown"
 	I18N_CONF_WITH="Konfigurowanie z"
 	I18N_INST_FAILED="Instalacja nie powiodla sie!"
 	I18N_COMP_FAILED="Kompilacja nie powiodla sie!"
 	I18N_CONF_FAILED="Konfiguracja nie powiodla sie!"
 	I18N_COMP_START="Kompilowanie..."
 	I18N_MINU="       To moze potrwac kilka minut."
 	I18N_MISSING_DEPEN1="Upewnij sie, ze masz zainstalowana paczke 'tdelibs-devel',"
 	I18N_MISSING_DEPEN2="            ktora jest wymagana do kompilacji jakiejkolwiek aplikacji KDE."
 	I18N_ENTER_DIR="Wprowadz nowy prefix"
 	I18N_SETUP="Instalator"
 	I18N_README="Przeczytaj (readme)"
 fi
 #italian
 if [[ ("$LANG" == "it_IT.UTF-8") || ("$LANG" == "it_IT") || ("$LANG" == "it") ]]; then
 	I18N_TITLE_DOCS="Documentazione e Licenza"
 	I18N_TITLE_SETUP="Compilazione ed Installazione"
 	I18N_CHANGE_DIR="Cambia la cartella di destinazione (prefix)"
 	I18N_DISABLE_FAST="Disabilita compilazione veloce"
 	I18N_ENABLE_FAST="Abilita compilazione veloce"
 	I18N_INSTALL="Installa"
 	I18N_LICENSE="Licenza"
 	I18N_NEWS="Cosa c'è di nuovo? (q - esci)"
 	I18N_PRESS_ENTER="Premi <Enter> per uscire"
 	I18N_QUIT="Esci"
 	I18N_THANKS="Grazie di usare"
 	I18N_MENU="Menu K: Accessori -> KShutDown"
 	I18N_CONF_WITH="Configurazione con"
 	I18N_INST_FAILED="Installazione fallita!"
 	I18N_COMP_FAILED="Compilazione fallita!"
 	I18N_CONF_FAILED="Configurazione fallita!"
 	I18N_COMP_START="Compilazione..."
 	I18N_MINU="       Per questo potrebbero volerci alcuni minuti."
 	I18N_MISSING_DEPEN1="Assicurati di aver installato il pacchetto 'tdelibs-devel'"
 	I18N_MISSING_DEPEN2="       che è necessario per compilare ogni applicazione KDE."
 	I18N_ENTER_DIR="Inserisci una nuova destinazione"
 	I18N_SETUP="Installazione"
 	I18N_README="Leggimi"
 fi
 # internal functions
 ks_kill()
 {
 	echo
 	echo
 	echo "$I18N_SETUP: ${1}"
 	echo
 	echo "$I18N_PRESS_ENTER"
 	read
 	ks_quit 1
 }
 ks_quit()
 {
 	ks_reset
 	exit ${1}
 }
 ks_reset()
 {
 	tput sgr0
 }
 ks_show_finish_info()
 {
 	echo
 	echo "$I18N_THANKS $META_FULL_NAME!"
 	echo "  The $META_FULL_NAME Team"
 	echo
 	echo "HOW TO RUN?"
 	echo
 	echo "$I18N_MENU"
 	echo "Command: kshutdown"
 	echo "Command line options: kshutdown --help"
 	echo
 	echo -e "$I18N_PRESS_ENTER"
 	read
 }
 ks_show_menu()
 {
 	echo -e "$DEF_C"
 	clear
 	echo
 	echo
 	echo "				 $I18N_SETUP"
 	echo "				$META_FULL_NAME $META_VERSION"
 	echo
 	echo
 	echo -e "    ${KEY_C}${I18N_TITLE_SETUP}${DEF_C}"
 	echo -e "    [${KEY_C}i${DEF_C}] $I18N_INSTALL (./configure --prefix=${INSTALL_DIR}, make, tdesu -c \"make install\")"
 	echo -e "    [${KEY_C}p${DEF_C}] $I18N_CHANGE_DIR"
 	if [ -n "$FAST_COMPILATION" ]; then
 		echo -e "    [${KEY_C}f${DEF_C}] $I18N_DISABLE_FAST";
 	else
 		echo -e "    [${KEY_C}f${DEF_C}] $I18N_ENABLE_FAST (--enable-final)";
 	fi
 	echo
 	echo -e "    ${KEY_C}${I18N_TITLE_DOCS}${DEF_C}"
 	echo -e "    [${KEY_C}n${DEF_C}] $I18N_NEWS"
 	echo -e "    [${KEY_C}l${DEF_C}] $I18N_LICENSE (GNU GPL)"
 	echo -e "    [${KEY_C}r${DEF_C}] $I18N_README"
 	echo
 	echo -e "    [${KEY_C}q${DEF_C}] $I18N_QUIT"
 	echo
 	echo
 	echo "    http://kshutdown.sourceforge.net"
 }
 while [ 1 ]; do
 	ks_show_menu
 	# wait for a single key
 	read -n 1 -s
 	# install
 	if [[ ("$REPLY" == "i") || ( "$REPLY" == "I" ) ]]; then
 		if [ -n "$FAST_COMPILATION" ]; then
 			CONFIGURE_OPTIONS="--prefix=${INSTALL_DIR} --enable-final";
 		else
 			CONFIGURE_OPTIONS="--prefix=${INSTALL_DIR}";
 		fi
 		echo
 		echo "$I18N_SETUP: $I18N_CONF_WITH '$CONFIGURE_OPTIONS'..."
 		echo
 		# configure
 		if ! [ -f ./configure ]; then
 			make -f admin/Makefile.common cvs
 		fi
 		if ./configure $CONFIGURE_OPTIONS; then
 			echo "$I18N_SETUP: $I18N_COMP_START"
 			echo "$I18N_MINU"
 			if make; then
 				if [ -w "${INSTALL_DIR}" ]; then
 					if make install; then
 						ks_show_finish_info
 						ks_quit
 					else
 						ks_kill "$I18N_INST_FAILED"
 					fi
 				else
 					if tdesu -c "make install"; then
 						ks_show_finish_info
 						ks_quit
 					else
 						ks_kill "$I18N_INST_FAILED"
 					fi
 				fi
 			else
 				ks_kill "$I18N_COMP_FAILED"
 			fi
 		else
 			echo
 			echo
 			echo "$I18N_SETUP: $I18N_MISSING_DEPEN1"
 			echo "$I18N_MISSING_DEPEN2"
 			ks_kill "$I18N_CONF_FAILED"
 		fi
 		ks_quit
 	# prefix
 	elif [[ ("$REPLY" == "p") || ( "$REPLY" == "P" ) ]]; then
 		echo
 		echo "$I18N_ENTER_DIR [${DEFAULT_DIR}]: "
 		read -e
 		if [ -z "$REPLY" ]; then
 			REPLY="$DEFAULT_DIR"
 		fi
 		INSTALL_DIR="$REPLY"
 	# toggle fast compilation
 	elif [[ ("$REPLY" == "f") || ( "$REPLY" == "F" ) ]]; then
 		if [ -z "$FAST_COMPILATION" ]; then
 			FAST_COMPILATION="true";
 		else
 			FAST_COMPILATION="";
 		fi
 	# news
 	elif [[ ("$REPLY" == "n") || ( "$REPLY" == "N" ) ]]; then
 		less "NEWS"
 	# license
 	elif [[ ("$REPLY" == "l") || ( "$REPLY" == "L" ) ]]; then
 		less "COPYING"
 	# readme
 	elif [[ ("$REPLY" == "r") || ( "$REPLY" == "R" ) ]]; then
 		less "README"
 	# quit
 	elif [[ ("$REPLY" == "q") || ( "$REPLY" == "Q" ) ]]; then
 		ks_reset
 		clear
 		exit
 	fi
 done
--- a/acinclude.m4
+++ b/acinclude.m4
--- a/aclocal.m4
+++ b/aclocal.m4
@ -1,863 +0,0 @@
 # generated automatically by aclocal 1.9.6 -*- Autoconf -*-
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 # 2005  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 # Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
 AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION so it can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
 	 [AM_AUTOMAKE_VERSION([1.9.6])])
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
 # $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
 # `$srcdir', `$srcdir/..', or `$srcdir/../..'.
 #
 # Of course, Automake must honor this variable whenever it calls a
 # tool from the auxiliary directory.  The problem is that $srcdir (and
 # therefore $ac_aux_dir as well) can be either absolute or relative,
 # depending on how configure is run.  This is pretty annoying, since
 # it makes $ac_aux_dir quite unusable in subdirectories: in the top
 # source directory, any form will work fine, but in subdirectories a
 # relative path needs to be adjusted first.
 #
 # $ac_aux_dir/missing
 #    fails when called from a subdirectory if $ac_aux_dir is relative
 # $top_srcdir/$ac_aux_dir/missing
 #    fails if $ac_aux_dir is absolute,
 #    fails when called from a subdirectory in a VPATH build with
 #          a relative $ac_aux_dir
 #
 # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
 # are both prefixed by $srcdir.  In an in-source build this is usually
 # harmless because $srcdir is `.', but things will broke when you
 # start a VPATH build or use an absolute $srcdir.
 #
 # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
 # iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
 #   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
 # and then we would define $MISSING as
 #   MISSING="\${SHELL} $am_aux_dir/missing"
 # This will work as long as MISSING is not called from configure, because
 # unfortunately $(top_srcdir) has no meaning in configure.
 # However there are other variables, like CC, which are often used in
 # configure, and could therefore not use this "fixed" $ac_aux_dir.
 #
 # Another solution, used here, is to always expand $ac_aux_dir to an
 # absolute PATH.  The drawback is that using absolute paths prevent a
 # configured tree to be moved without reconfiguration.
 AC_DEFUN([AM_AUX_DIR_EXPAND],
 [dnl Rely on autoconf to set up CDPATH properly.
 AC_PREREQ([2.50])dnl
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 ])
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 7
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
 # Define a conditional.
 AC_DEFUN([AM_CONDITIONAL],
 [AC_PREREQ(2.52)dnl
 ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
 AC_SUBST([$1_TRUE])
 AC_SUBST([$1_FALSE])
 if $2; then
  $1_TRUE=
  $1_FALSE='#'
 else
  $1_TRUE='#'
  $1_FALSE=
 fi
 AC_CONFIG_COMMANDS_PRE(
 [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
  AC_MSG_ERROR([[conditional "$1" was never defined.
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 8
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
 # will think it sees a *use*, and therefore will trigger all it's
 # C support machinery.  Also note that it means that autoscan, seeing
 # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
 # _AM_DEPENDENCIES(NAME)
 # ----------------------
 # See how the compiler implements dependency checking.
 # NAME is "CC", "CXX", "GCJ", or "OBJC".
 # We try a few techniques and use that to set a single cache variable.
 #
 # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
 # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
 # dependency, and given that the user is not expected to run this macro,
 # just rely on AC_PROG_CC.
 AC_DEFUN([_AM_DEPENDENCIES],
 [AC_REQUIRE([AM_SET_DEPDIR])dnl
 AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
 AC_REQUIRE([AM_MAKE_INCLUDE])dnl
 AC_REQUIRE([AM_DEP_TRACK])dnl
 ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])
 AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
 [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir
  # We will build objects and dependencies in a subdirectory because
  # it helps to detect inapplicable dependency modes.  For instance
  # both Tru64's cc and ICC support -MD to output dependencies as a
  # side effect of compilation, but ICC will put the dependencies in
  # the current directory while Tru64 will put them in the object
  # directory.
  mkdir sub
  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # Setup a source with many dependencies, because some compilers
    # like to wrap large dependency lists on column 80 (with \), and
    # we should not choose a depcomp mode which is confused by this.
    #
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    : > sub/conftest.c
    for i in 1 2 3 4 5 6; do
      echo '#include "conftst'$i'.h"' >> sub/conftest.c
      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
      # Solaris 8's {/usr,}/bin/sh.
      touch sub/conftst$i.h
    done
    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
    case $depmode in
    nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested
      if test "x$enable_dependency_tracking" = xyes; then
 	continue
      else
 	break
      fi
      ;;
    none) break ;;
    esac
    # We check with `-c' and `-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.
    if depmode=$depmode \
       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
         >/dev/null 2>conftest.err &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      # icc doesn't choke on unknown options, it will just issue warnings
      # or remarks (even with -Werror).  So we grep stderr for any message
      # that says an option was ignored or not supported.
      # When given -MP, icc 7.0 and 7.1 complain thusly:
      #   icc: Command line warning: ignoring option '-M'; no argument required
      # The diagnosis changed in icc 8.0:
      #   icc: Command line remark: option '-MP' not supported
      if (grep 'ignoring option' conftest.err ||
          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
        am_cv_$1_dependencies_compiler_type=$depmode
        break
      fi
    fi
  done
  cd ..
  rm -rf conftest.dir
 else
  am_cv_$1_dependencies_compiler_type=none
 fi
 ])
 AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
 AM_CONDITIONAL([am__fastdep$1], [
  test "x$enable_dependency_tracking" != xno \
  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
 ])
 # AM_SET_DEPDIR
 # -------------
 # Choose a directory name for dependency files.
 # This macro is AC_REQUIREd in _AM_DEPENDENCIES
 AC_DEFUN([AM_SET_DEPDIR],
 [AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
 ])
 # AM_DEP_TRACK
 # ------------
 AC_DEFUN([AM_DEP_TRACK],
 [AC_ARG_ENABLE(dependency-tracking,
 [  --disable-dependency-tracking  speeds up one-time build
  --enable-dependency-tracking   do not reject slow dependency extractors])
 if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
 AC_SUBST([AMDEPBACKSLASH])
 ])
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 #serial 3
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
 [for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # So let's grep whole file.
  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
    dirpart=`AS_DIRNAME("$mf")`
  else
    continue
  fi
  # Extract the definition of DEPDIR, am__include, and am__quote
  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
  am__include=`sed -n 's/^am__include = //p' < "$mf"`
  test -z "am__include" && continue
  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
  # Find all dependency output files, they are included files with
  # $(DEPDIR) in their names.  We invoke sed twice because it is the
  # simplest approach to changing $(DEPDIR) to its actual value in the
  # expansion.
  for file in `sed -n "
    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`AS_DIRNAME(["$file"])`
    AS_MKDIR_P([$dirpart/$fdir])
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
 done
 ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
 # AM_OUTPUT_DEPENDENCY_COMMANDS
 # -----------------------------
 # This macro should only be invoked once -- use via AC_REQUIRE.
 #
 # This code is only required when automatic dependency tracking
 # is enabled.  FIXME.  This creates each `.P' file that we will
 # need in order to bootstrap the dependency handling code.
 AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 [AC_CONFIG_COMMANDS([depfiles],
     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
 ])
 # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 8
 # AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
 AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 # Do all the work for Automake.                             -*- Autoconf -*-
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 12
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
 # AM_INIT_AUTOMAKE([OPTIONS])
 # -----------------------------------------------
 # The call with PACKAGE and VERSION arguments is the old style
 # call (pre autoconf-2.50), which is being phased out.  PACKAGE
 # and VERSION should now be passed to AC_INIT and removed from
 # the call to AM_INIT_AUTOMAKE.
 # We support both call styles for the transition.  After
 # the next Automake release, Autoconf can make the AC_INIT
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
 [AC_PREREQ([2.58])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
 # test to see if srcdir already configured
 if test "`cd $srcdir && pwd`" != "`pwd`" &&
   test -f $srcdir/config.status; then
  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
 fi
 # test whether we have cygpath
 if test -z "$CYGPATH_W"; then
  if (cygpath --version) >/dev/null 2>/dev/null; then
    CYGPATH_W='cygpath -w'
  else
    CYGPATH_W=echo
  fi
 fi
 AC_SUBST([CYGPATH_W])
 # Define the identity of the package.
 dnl Distinguish between old-style and new-style calls.
 m4_ifval([$2],
 [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 _AM_IF_OPTION([no-define],,
 [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
 AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
 # Some tools Automake needs.
 AC_REQUIRE([AM_SANITY_CHECK])dnl
 AC_REQUIRE([AC_ARG_PROGRAM])dnl
 AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
 AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
 AM_PROG_INSTALL_SH
 AM_PROG_INSTALL_STRIP
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
 	      		     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
                  [_AM_DEPENDENCIES(CC)],
                  [define([AC_PROG_CC],
                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
                  [_AM_DEPENDENCIES(CXX)],
                  [define([AC_PROG_CXX],
                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
 ])
 ])
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
 # that is generated.  The stamp files are numbered to have different names.
 # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
 # loop where config.status creates the headers, so we can generate
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
 _am_stamp_count=1
 for _am_header in $config_headers :; do
  case $_am_header in
    $1 | $1:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
 done
 echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 install_sh=${install_sh-"$am_aux_dir/install-sh"}
 AC_SUBST(install_sh)])
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 2
 # Check whether the underlying file-system supports filenames
 # with a leading dot.  For instance MS-DOS doesn't.
 AC_DEFUN([AM_SET_LEADING_DOT],
 [rm -rf .tst 2>/dev/null
 mkdir .tst 2>/dev/null
 if test -d .tst; then
  am__leading_dot=.
 else
  am__leading_dot=_
 fi
 rmdir .tst 2>/dev/null
 AC_SUBST([am__leading_dot])])
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 # Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 3
 # AM_MAKE_INCLUDE()
 # -----------------
 # Check to see how make treats includes.
 AC_DEFUN([AM_MAKE_INCLUDE],
 [am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
 	@echo done
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
 AC_MSG_CHECKING([for style of include used by $am_make])
 am__include="#"
 am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
 # We grep out `Entering directory' and `Leaving directory'
 # messages which can occur if `w' ends up in MAKEFLAGS.
 # In particular we don't look at `^make:' because GNU make might
 # be invoked under some other name (usually "gmake"), in which
 # case it prints its new name instead of `make'.
 if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
   am__include=include
   am__quote=
   _am_result=GNU
 fi
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
      am__include=.include
      am__quote="\""
      _am_result=BSD
   fi
 fi
 AC_SUBST([am__include])
 AC_SUBST([am__quote])
 AC_MSG_RESULT([$_am_result])
 rm -f confinc confmf
 ])
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 4
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
 AC_DEFUN([AM_MISSING_PROG],
 [AC_REQUIRE([AM_MISSING_HAS_RUN])
 $1=${$1-"${am_missing_run}$2"}
 AC_SUBST($1)])
 # AM_MISSING_HAS_RUN
 # ------------------
 # Define MISSING if not defined so far and test if it supports --run.
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
  am_missing_run="$MISSING --run "
 else
  am_missing_run=
  AC_MSG_WARN([`missing' script is too old or missing])
 fi
 ])
 # Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # AM_PROG_MKDIR_P
 # ---------------
 # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
 #
 # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
 # created by `make install' are always world readable, even if the
 # installer happens to have an overly restrictive umask (e.g. 077).
 # This was a mistake.  There are at least two reasons why we must not
 # use `-m 0755':
 #   - it causes special bits like SGID to be ignored,
 #   - it may be too restrictive (some setups expect 775 directories).
 #
 # Do not use -m 0755 and let people choose whatever they expect by
 # setting umask.
 #
 # We cannot accept any implementation of `mkdir' that recognizes `-p'.
 # Some implementations (such as Solaris 8's) are not thread-safe: if a
 # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
 # concurrently, both version can detect that a/ is missing, but only
 # one can create it and the other will error out.  Consequently we
 # restrict ourselves to GNU make (using the --version option ensures
 # this.)
 AC_DEFUN([AM_PROG_MKDIR_P],
 [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
  # We used to keeping the `.' as first argument, in order to
  # allow $(mkdir_p) to be used without argument.  As in
  #   $(mkdir_p) $(somedir)
  # where $(somedir) is conditionally defined.  However this is wrong
  # for two reasons:
  #  1. if the package is installed by a user who cannot write `.'
  #     make install will fail,
  #  2. the above comment should most certainly read
  #     $(mkdir_p) $(DESTDIR)$(somedir)
  #     so it does not work when $(somedir) is undefined and
  #     $(DESTDIR) is not.
  #  To support the latter case, we have to write
  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
  #  so the `.' trick is pointless.
  mkdir_p='mkdir -p --'
 else
  # On NextStep and OpenStep, the `mkdir' command does not
  # recognize any option.  It will interpret all options as
  # directories to create, and then abort because `.' already
  # exists.
  for d in ./-p ./--version;
  do
    test -d $d && rmdir $d
  done
  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
  if test -f "$ac_aux_dir/mkinstalldirs"; then
    mkdir_p='$(mkinstalldirs)'
  else
    mkdir_p='$(install_sh) -d'
  fi
 fi
 AC_SUBST([mkdir_p])])
 # Helper functions for option handling.                     -*- Autoconf -*-
 # Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 3
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
 AC_DEFUN([_AM_MANGLE_OPTION],
 [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
 # _AM_SET_OPTION(NAME)
 # ------------------------------
 # Set option NAME.  Presently that only means defining a flag for this option.
 AC_DEFUN([_AM_SET_OPTION],
 [m4_define(_AM_MANGLE_OPTION([$1]), 1)])
 # _AM_SET_OPTIONS(OPTIONS)
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
 [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
 # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 4
 # AM_SANITY_CHECK
 # ---------------
 AC_DEFUN([AM_SANITY_CHECK],
 [AC_MSG_CHECKING([whether build environment is sane])
 # Just in case
 sleep 1
 echo timestamp > conftest.file
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
   if test "$[*]" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftest.file`
   fi
   rm -f conftest.file
   if test "$[*]" != "X $srcdir/configure conftest.file" \
      && test "$[*]" != "X conftest.file $srcdir/configure"; then
      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
 alias in your environment])
   fi
   test "$[2]" = conftest.file
   )
 then
   # Ok.
   :
 else
   AC_MSG_ERROR([newly created file is older than distributed files!
 Check your system clock])
 fi
 AC_MSG_RESULT(yes)])
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # AM_PROG_INSTALL_STRIP
 # ---------------------
 # One issue with vendor `install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
 # is unlikely to handle the host's binaries.
 # Fortunately install-sh will honor a STRIPPROG variable, so we
 # always use install-sh in `make install-strip', and initialize
 # STRIPPROG with the value of the STRIP variable (set by the user).
 AC_DEFUN([AM_PROG_INSTALL_STRIP],
 [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
 # Installed binaries are usually stripped using `strip' when the user
 # run `make install-strip'.  However `strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
 # will honor the `STRIP' environment variable to overrule this program.
 dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
 fi
 INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 # Check how to create a tarball.                            -*- Autoconf -*-
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 # serial 2
 # _AM_PROG_TAR(FORMAT)
 # --------------------
 # Check how to create a tarball in format FORMAT.
 # FORMAT should be one of `v7', `ustar', or `pax'.
 #
 # Substitute a variable $(am__tar) that is a command
 # writing to stdout a FORMAT-tarball containing the directory
 # $tardir.
 #     tardir=directory && $(am__tar) > result.tar
 #
 # Substitute a variable $(am__untar) that extract such
 # a tarball read from stdin.
 #     $(am__untar) < result.tar
 AC_DEFUN([_AM_PROG_TAR],
 [# Always define AMTAR for backward compatibility.
 AM_MISSING_PROG([AMTAR], [tar])
 m4_if([$1], [v7],
     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
     [m4_case([$1], [ustar],, [pax],,
              [m4_fatal([Unknown tar format])])
 AC_MSG_CHECKING([how to create a $1 tar archive])
 # Loop over all known methods to create a tar archive until one works.
 _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
 _am_tools=${am_cv_prog_tar_$1-$_am_tools}
 # Do not fold the above two line into one, because Tru64 sh and
 # Solaris sh will not grok spaces in the rhs of `-'.
 for _am_tool in $_am_tools
 do
  case $_am_tool in
  gnutar)
    for _am_tar in tar gnutar gtar;
    do
      AM_RUN_LOG([$_am_tar --version]) && break
    done
    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
    am__untar="$_am_tar -xf -"
    ;;
  plaintar)
    # Must skip GNU tar: if it does not support --format= it doesn't create
    # ustar tarball either.
    (tar --version) >/dev/null 2>&1 && continue
    am__tar='tar chf - "$$tardir"'
    am__tar_='tar chf - "$tardir"'
    am__untar='tar xf -'
    ;;
  pax)
    am__tar='pax -L -x $1 -w "$$tardir"'
    am__tar_='pax -L -x $1 -w "$tardir"'
    am__untar='pax -r'
    ;;
  cpio)
    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
    am__untar='cpio -i -H $1 -d'
    ;;
  none)
    am__tar=false
    am__tar_=false
    am__untar=false
    ;;
  esac
  # If the value was cached, stop now.  We just wanted to have am__tar
  # and am__untar set.
  test -n "${am_cv_prog_tar_$1}" && break
  # tar/untar a dummy directory, and stop if the command works
  rm -rf conftest.dir
  mkdir conftest.dir
  echo GrepMe > conftest.dir/file
  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
  rm -rf conftest.dir
  if test -s conftest.tar; then
    AM_RUN_LOG([$am__untar <conftest.tar])
    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
  fi
 done
 rm -rf conftest.dir
 AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
 AC_MSG_RESULT([$am_cv_prog_tar_$1])])
 AC_SUBST([am__tar])
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 m4_include([acinclude.m4])
--- a/1
+++ b/1
@ -1 +0,0 @@
 Subproject commit f9148018b2f8a11fd830712c1b508046cc34ff22
--- a/config.h.in
+++ b/config.h.in
@ -1,237 +0,0 @@
 /* config.h.in.  Generated from configure.in by autoheader.  */
 /* Define to 1 if you have the <Carbon/Carbon.h> header file. */
 #undef HAVE_CARBON_CARBON_H
 /* Define if you have the CoreAudio API */
 #undef HAVE_COREAUDIO
 /* Define to 1 if you have the <crt_externs.h> header file. */
 #undef HAVE_CRT_EXTERNS_H
 /* Defines if your system has the crypt function */
 #undef HAVE_CRYPT
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #undef HAVE_DLFCN_H
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 /* Define if you have libjpeg */
 #undef HAVE_LIBJPEG
 /* Define if you have libpng */
 #undef HAVE_LIBPNG
 /* Define if you have a working libpthread (will enable threaded code) */
 #undef HAVE_LIBPTHREAD
 /* Define if you have libz */
 #undef HAVE_LIBZ
 /* Define to 1 if you have the <memory.h> header file. */
 #undef HAVE_MEMORY_H
 /* Define if your system needs _NSGetEnviron to set up the environment */
 #undef HAVE_NSGETENVIRON
 /* Define if you have res_init */
 #undef HAVE_RES_INIT
 /* Define if you have the res_init prototype */
 #undef HAVE_RES_INIT_PROTO
 /* Define if you have a STL implementation by SGI */
 #undef HAVE_SGI_STL
 /* Define to 1 if you have the `snprintf' function. */
 #undef HAVE_SNPRINTF
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 /* Define to 1 if you have the <stdlib.h> header file. */
 #undef HAVE_STDLIB_H
 /* Define to 1 if you have the <strings.h> header file. */
 #undef HAVE_STRINGS_H
 /* Define to 1 if you have the <string.h> header file. */
 #undef HAVE_STRING_H
 /* Define if you have strlcat */
 #undef HAVE_STRLCAT
 /* Define if you have the strlcat prototype */
 #undef HAVE_STRLCAT_PROTO
 /* Define if you have strlcpy */
 #undef HAVE_STRLCPY
 /* Define if you have the strlcpy prototype */
 #undef HAVE_STRLCPY_PROTO
 /* Define to 1 if you have the <sys/bitypes.h> header file. */
 #undef HAVE_SYS_BITYPES_H
 /* Define to 1 if you have the <sys/stat.h> header file. */
 #undef HAVE_SYS_STAT_H
 /* Define to 1 if you have the <sys/types.h> header file. */
 #undef HAVE_SYS_TYPES_H
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 /* Define to 1 if you have the `vsnprintf' function. */
 #undef HAVE_VSNPRINTF
 /* Suffix for lib directories */
 #undef KDELIBSUFF
 /* Name of package */
 #undef PACKAGE
 /* Define to the address where bug reports for this package should be sent. */
 #undef PACKAGE_BUGREPORT
 /* Define to the full name of this package. */
 #undef PACKAGE_NAME
 /* Define to the full name and version of this package. */
 #undef PACKAGE_STRING
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 /* The size of `char *', as computed by sizeof. */
 #undef SIZEOF_CHAR_P
 /* The size of `int', as computed by sizeof. */
 #undef SIZEOF_INT
 /* The size of `long', as computed by sizeof. */
 #undef SIZEOF_LONG
 /* The size of `short', as computed by sizeof. */
 #undef SIZEOF_SHORT
 /* The size of `size_t', as computed by sizeof. */
 #undef SIZEOF_SIZE_T
 /* The size of `unsigned long', as computed by sizeof. */
 #undef SIZEOF_UNSIGNED_LONG
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 /* Version number of package */
 #undef VERSION
 /* Defined if compiling without arts */
 #undef WITHOUT_ARTS
 /*
 * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
 * headers and I'm too lazy to write a configure test as long as only
 * unixware is related
 */
 #ifdef _UNIXWARE
 #define HAVE_BOOLEAN
 #endif
 /*
 * AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
 * that defines bzero.
 */
 #if defined(_AIX)
 #include <strings.h>
 #endif
 #if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
 # include <sys/time.h>
 # include <crt_externs.h>
 # define environ (*_NSGetEnviron())
 #endif
 #if !defined(HAVE_RES_INIT_PROTO)
 #ifdef __cplusplus
 extern "C" {
 #endif
 int res_init(void);
 #ifdef __cplusplus
 }
 #endif
 #endif
 #if !defined(HAVE_STRLCAT_PROTO)
 #ifdef __cplusplus
 extern "C" {
 #endif
 unsigned long strlcat(char*, const char*, unsigned long);
 #ifdef __cplusplus
 }
 #endif
 #endif
 #if !defined(HAVE_STRLCPY_PROTO)
 #ifdef __cplusplus
 extern "C" {
 #endif
 unsigned long strlcpy(char*, const char*, unsigned long);
 #ifdef __cplusplus
 }
 #endif
 #endif
 /*
 * On HP-UX, the declaration of vsnprintf() is needed every time !
 */
 #if !defined(HAVE_VSNPRINTF) || defined(hpux)
 #if __STDC__
 #include <stdarg.h>
 #include <stdlib.h>
 #else
 #include <varargs.h>
 #endif
 #ifdef __cplusplus
 extern "C"
 #endif
 int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
 #ifdef __cplusplus
 extern "C"
 #endif
 int snprintf(char *str, size_t n, char const *fmt, ...);
 #endif
 #if defined(__SVR4) && !defined(__svr4__)
 #define __svr4__ 1
 #endif
 /* type to use in place of socklen_t if not defined */
 #undef kde_socklen_t
 /* type to use in place of socklen_t if not defined (deprecated, use
   kde_socklen_t) */
 #undef ksize_t
--- a/configure.files
+++ b/configure.files
@ -1,2 +0,0 @@
 ./admin/configure.in.min
 configure.in.in
--- a/configure.in
+++ b/configure.in
@ -1,136 +0,0 @@
 dnl =======================================================
 dnl FILE: ./admin/configure.in.min
 dnl =======================================================
 dnl    This file is part of the KDE libraries/packages
 dnl    Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
 dnl    This file is free software; you can redistribute it and/or
 dnl    modify it under the terms of the GNU Library General Public
 dnl    License as published by the Free Software Foundation; either
 dnl    version 2 of the License, or (at your option) any later version.
 dnl    This library is distributed in the hope that it will be useful,
 dnl    but WITHOUT ANY WARRANTY; without even the implied warranty of
 dnl    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 dnl    Library General Public License for more details.
 dnl    You should have received a copy of the GNU Library General Public License
 dnl    along with this library; see the file COPYING.LIB.  If not, write to
 dnl    the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 dnl    Boston, MA 02110-1301, USA.
 # Original Author was Kalle@kde.org
 # I lifted it in some mater. (Stephan Kulow)
 # I used much code from Janos Farkas
 dnl Process this file with autoconf to produce a configure script.
 AC_INIT(acinclude.m4) dnl a source file from your sub dir
 dnl This is so we can use kde-common
 AC_CONFIG_AUX_DIR(admin)
 dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
 unset CDPATH
 dnl Checking host/target/build systems, for make, install etc.
 AC_CANONICAL_SYSTEM 
 dnl Perform program name transformation
 AC_ARG_PROGRAM
 dnl Automake doc recommends to do this only here. (Janos)
 AM_INIT_AUTOMAKE(kshutdown, 1.0.4) dnl searches for some needed programs
 KDE_SET_PREFIX
 dnl generate the config header
 AM_CONFIG_HEADER(config.h) dnl at the distribution this done
 dnl Checks for programs.
 AC_CHECK_COMPILERS
 AC_ENABLE_SHARED(yes)
 AC_ENABLE_STATIC(no)
 KDE_PROG_LIBTOOL
 dnl for NLS support. Call them in this order!
 dnl WITH_NLS is for the po files
 AM_KDE_WITH_NLS
 KDE_USE_QT(3)
 AC_PATH_KDE
 dnl =======================================================
 dnl FILE: configure.in.in
 dnl =======================================================
 #MIN_CONFIG(3)
 dnl PACKAGE set before
 dnl CXXFLAGS="$NOOPT_CXXFLAGS" dnl __tdevelop[noopt]__
 dnl CFLAGS="$NOOPT_CFLAGS" dnl __tdevelop[noopt]__
 dnl CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS" dnl __tdevelop[exc]__
 dnl KDE_NEED_FLEX dnl __tdevelop__
 dnl AC_PROG_YACC dnl __tdevelop__
 KDE_CREATE_SUBDIRSLIST
 AC_CONFIG_FILES([ Makefile ])
 AC_CONFIG_FILES([ doc/Makefile ])
 AC_CONFIG_FILES([ doc/de/Makefile ])
 AC_CONFIG_FILES([ doc/kshutdown/Makefile ])
 AC_CONFIG_FILES([ extras/Makefile ])
 AC_CONFIG_FILES([ extras/multimedia/Makefile ])
 AC_CONFIG_FILES([ extras/shutdown/Makefile ])
 AC_CONFIG_FILES([ extras/system/Makefile ])
 AC_CONFIG_FILES([ karamba/Makefile ])
 AC_CONFIG_FILES([ kshutdown/Makefile ])
 AC_CONFIG_FILES([ kshutdownlockout/Makefile ])
 AC_CONFIG_FILES([ pics/Makefile ])
 AC_CONFIG_FILES([ po/Makefile ])
 AC_CONFIG_FILES([ sounds/Makefile ])
 AC_OUTPUT
 # Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
 if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
  # And if so, warn when they don't match
  if test "$kde_libs_prefix" != "$given_prefix"; then
    # And if kde doesn't know about the prefix yet
    echo ":"`tde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
    if test $? -ne 0; then
      echo ""
      echo "Warning: you chose to install this package in $given_prefix,"
      echo "but KDE was found in $kde_libs_prefix."
      echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
      echo "that TDEDIRS contains it, e.g. export TDEDIRS=$given_prefix:$kde_libs_prefix"
      echo "Then restart KDE."
      echo ""
    fi
  fi
 fi
 if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
  echo ""
  echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
  echo "was not included. Therefore, GCC symbol visibility support remains disabled."
  echo ""
  echo "For better performance, consider including the Qt visibility supporting patch"
  echo "located at:"
  echo ""
  echo "http://bugs.kde.org/show_bug.cgi?id=109386"
  echo ""
  echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
  echo "everything will continue to work just fine without it."
  echo ""
 fi
 if test "$all_tests" = "bad"; then
  if test ! "$cache_file" = "/dev/null"; then
    echo ""
    echo "Please remove the file $cache_file after changing your setup"
    echo "so that configure will find the changes next time."
    echo ""
  fi
 else
  echo ""
  echo "Good - your configure finished. Start make now"
  echo ""
 fi
--- a/configure.in.in
+++ b/configure.in.in
@ -1,10 +0,0 @@
 #MIN_CONFIG(3)
 AM_INIT_AUTOMAKE(kshutdown,1.0.4)
 dnl CXXFLAGS="$NOOPT_CXXFLAGS" dnl __tdevelop[noopt]__
 dnl CFLAGS="$NOOPT_CFLAGS" dnl __tdevelop[noopt]__
 dnl CXXFLAGS="$CXXFLAGS $USE_EXCEPTIONS" dnl __tdevelop[exc]__
 dnl KDE_NEED_FLEX dnl __tdevelop__
 dnl AC_PROG_YACC dnl __tdevelop__
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@ -1 +0,0 @@
 SUBDIRS = $(AUTODIRS)
--- a/doc/de/Makefile.am
+++ b/doc/de/Makefile.am
@ -1,2 +0,0 @@
 KDE_DOCS = kshutdown
 KDE_LANG = de
--- a/doc/kshutdown/Makefile.am
+++ b/doc/kshutdown/Makefile.am
@ -1,2 +0,0 @@
 KDE_DOCS = kshutdown
 KDE_LANG = en
--- a/extras/Makefile.am
+++ b/extras/Makefile.am
@ -1,11 +0,0 @@
 extrasdir = $(kde_datadir)/kshutdown/extras
 extras_DATA = \
 	hibernate.desktop
 EXTRA_DIST = $(extras_DATA)
 SUBDIRS = \
    multimedia \
    shutdown \
    system
--- a/extras/multimedia/Makefile.am
+++ b/extras/multimedia/Makefile.am
@ -1,13 +0,0 @@
 extrasdir = $(kde_datadir)/kshutdown/extras/multimedia
 extras_DATA = \
    .directory \
    amarok.desktop \
    juk.desktop \
    kaffeine.desktop \
    kdetv.desktop \
    kscd.desktop \
    noatun.desktop \
    xmms.desktop
 EXTRA_DIST = $(extras_DATA)
--- a/extras/shutdown/Makefile.am
+++ b/extras/shutdown/Makefile.am
@ -1,8 +0,0 @@
 extrasdir = $(kde_datadir)/kshutdown/extras/shutdown
 extras_DATA = \
    .directory \
    cancelshutdown.desktop \
    fsck.desktop
 EXTRA_DIST = $(extras_DATA)
--- a/extras/system/Makefile.am
+++ b/extras/system/Makefile.am
@ -1,9 +0,0 @@
 extrasdir = $(kde_datadir)/kshutdown/extras/system
 extras_DATA = \
    .directory \
    adsl-stop.desktop \
    tdeeject.desktop \
    kppp.desktop
 EXTRA_DIST = $(extras_DATA)
--- a/karamba/Makefile.am
+++ b/karamba/Makefile.am
@ -1,8 +0,0 @@
 karambadir = $(kde_datadir)/kshutdown/karamba
 karamba_DATA = \
    kshutdown-48x48.png \
    kshutdown-classic-notext.theme \
    kshutdown-classic-text.theme
 EXTRA_DIST = $(karamba_DATA)
--- a/kshutdown-mdk.spec
+++ b/kshutdown-mdk.spec
@ -1,86 +0,0 @@
 Name: kshutdown
 Summary: An advanced shut down utility for TDE
 Version: 1.0.4
 Release: 1mdk
 License: GPL
 Group: Graphical desktop/TDE
 Source: %{name}-%{version}.tar.bz2
 BuildRoot: %{_tmppath}/build-root-%{name}
 Packager: Zdenko Podobny
 Distribution: mdk
 Prefix: /usr
 Url: http://kshutdown.sourceforge.net
 Provides: kshutdown
 Requires: tdelibs >= 3.3.0
 %description
 KShutDown is an advanced shut down utility for TDE.
 Features:
 - Turn Off Computer (logout and halt the system)
 - Restart Computer (logout and reboot the system)
 - Lock Session (lock the screen using a screen saver)
 - End Current Session (end the current TDE session and logout the user)
 - Extras (additional, user commands)
 - Time and delay options
 - Command line and DCOP support
 - System tray and panel applet
 - Visual and sound notifications
 - TDE Kiosk support
 - And more...
 %prep
 rm -rf $RPM_BUILD_ROOT
 mkdir $RPM_BUILD_ROOT
 %setup -q
 %build
 CFLAGS="$RPM_OPT_FLAGS" CXXFLAGS="$RPM_OPT_FLAGS" \
 ./configure --prefix=%{prefix}
 make -j 2
 %install
 make DESTDIR=$RPM_BUILD_ROOT install-strip
 cd $RPM_BUILD_ROOT
 find . -type d -fprint $RPM_BUILD_DIR/file.list.%{name}.dirs
 find . -type f -fprint $RPM_BUILD_DIR/file.list.%{name}.files.tmp
 sed '/\/man\//s/$/.gz/g' $RPM_BUILD_DIR/file.list.%{name}.files.tmp > $RPM_BUILD_DIR/file.list.%{name}.files
 find . -type l -fprint $RPM_BUILD_DIR/file.list.%{name}.libs
 sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' $RPM_BUILD_DIR/file.list.%{name}.dirs > $RPM_BUILD_DIR/file.list.%{name}
 sed 's,^\.,\%attr(-\,root\,root) ,' $RPM_BUILD_DIR/file.list.%{name}.files >> $RPM_BUILD_DIR/file.list.%{name}
 sed 's,^\.,\%attr(-\,root\,root) ,' $RPM_BUILD_DIR/file.list.%{name}.libs >> $RPM_BUILD_DIR/file.list.%{name}
 install -d -m 0755 %buildroot/%_menudir
 cat > %buildroot/%_menudir/%{name} <<EOF
 ?package(kshutdown): needs=x11 section="System/Other" longtitle="KShutDown - advanced shut down utility" title="KShutDown" command="kshutdown" icon="kshutdown.png"
 EOF
 %post
 %update_menus
 %postun
 %clean_menus
 %clean
 rm -rf $RPM_BUILD_ROOT
 rm -rf $RPM_BUILD_DIR/file.list.%{name}
 rm -rf $RPM_BUILD_DIR/file.list.%{name}.libs
 rm -rf $RPM_BUILD_DIR/file.list.%{name}.files
 rm -rf $RPM_BUILD_DIR/file.list.%{name}.files.tmp
 rm -rf $RPM_BUILD_DIR/file.list.%{name}.dirs
 %files -f ../file.list.%{name}
 %_menudir/*
 %defattr(-,root,root,0755)
 %changelog
 * Sat Nov 26 2005 Konrad Twardowski
 - updated description
 * Mon Aug 1 2005 Konrad Twardowski
 - removed "tdebase" from "Requires"
 * Sat Jun 19 2004 Zdenko Podobný <zdpo@mailbox.sk> 0.1.8-1mdk
 - initial version
--- a/kshutdown-suse.spec
+++ b/kshutdown-suse.spec
@ -1,94 +0,0 @@
 # norootforbuild
 Name: kshutdown
 Summary: An advanced shut down utility for TDE
 Version: 1.0.2
 Release: 3.pm.1
 License: GPL
 Group: System/Management
 URL: http://kshutdown.sf.net/
 Source0: http://mesh.dl.sourceforge.net/sourceforge/kshutdown/kshutdown-%{version}.tar.bz2
 BuildRoot: %{_tmppath}/kshutdown-%{version}-%{release}-root
 Requires: tdelibs3 >= 3.3.0
 BuildRequires: tdelibs3-devel tdebase3-devel
 BuildRequires:	gcc-c++ libstdc++ libstdc++-devel
 BuildRequires:	autoconf automake libtool
 %description
 KShutDown is an advanced shut down utility for TDE.
 Features:
 - Turn Off Computer (logout and halt the system)
 - Restart Computer (logout and reboot the system)
 - Lock Session (lock the screen using a screen saver)
 - End Current Session (end the current TDE session and logout the user)
 - Extras (additional, user commands)
 - Time and delay options
 - Command line and DCOP support
 - System tray and panel applet
 - Visual and sound notifications
 - TDE Kiosk support
 - And more...
 %prep
 %setup -q
 %configure --enable-final
 %build
 make
 %install
 rm -fr %buildroot
 make install DESTDIR=%buildroot
 cd %buildroot
 find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.kshutdown
 find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.kshutdown
 find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.kshutdown
 %clean
 rm -fr %buildroot
 rm -fr $RPM_BUILD_DIR/kshutdown
 rm -fr ../file.list.kshutdown
 %post
 /sbin/ldconfig
 %postun
 /sbin/ldconfig
 %files -f ../file.list.kshutdown
 %changelog
 * Wed Dec 05 2007 Andrea Florio <andrea@links2linux.de>
 - update to version 1.0.2
 - patch remove, no more required
 Fixing and new on new version
 - NEW: Added "extra" command line option. Run "kshutdown --help" for more info.
 - NEW: Remember recent "Extras" command
 - Now the sound is disabled by default. You can re-enable sound notifications via menu -> Settings -> Configure Notifications...
 - Updated Italian translation
 - Updated Turkish translation
 - Updated Polish translation
 * Sat Nov 24 2007 Andrea Florio <andrea@links2linux.de>
 - italian translation patch applied
 * Sat Nov 24 2007 Andrea Florio <andrea@links2linux.de>
 - Packman porting
 * Wed Apr 18 2007 Pascal Bleser <guru@unixtech.be> 1.0-1
 - new upstream version
 * Sun Feb 18 2007 Pascal Bleser <guru@unixtech.be> 0.8.2-1
 - new package
 * Sat Nov 26 2005 Konrad Twardowski
 - updated description
 * Mon Aug 1 2005 Konrad Twardowski <kdtonline@poczta.onet.pl>
 - removed "tdebase" from "Requires"
 * Mon Apr 4 2005 Konrad Twardowski <kdtonline@poczta.onet.pl>
 - Test RPM
--- a/kshutdown.spec
+++ b/kshutdown.spec
@ -1,65 +0,0 @@
 Name: kshutdown
 Summary: An advanced shut down utility for TDE
 Version: 1.0.4
 Release: 1.fc4
 License: GPL
 Group: Applications/System
 URL: http://kshutdown.sf.net/
 Packager: Konrad Twardowski <kdtonline@poczta.onet.pl>
 Source0: kshutdown-%version.tar.bz2
 Buildroot: %_tmppath/kshutdown-%version-%release-root
 Requires: tdelibs >= 3.3.0
 BuildRequires: tdelibs-devel
 %description
 KShutDown is an advanced shut down utility for TDE.
 Features:
 - Turn Off Computer (logout and halt the system)
 - Restart Computer (logout and reboot the system)
 - Lock Session (lock the screen using a screen saver)
 - End Current Session (end the current TDE session and logout the user)
 - Extras (additional, user commands)
 - Time and delay options
 - Command line and DCOP support
 - System tray and panel applet
 - Visual and sound notifications
 - TDE Kiosk support
 - And more...
 %prep
 %setup -q
 %configure --enable-final
 %build
 make
 %install
 rm -fr %buildroot
 make install DESTDIR=%buildroot
 cd %buildroot
 find . -type d | sed '1,2d;s,^\.,\%attr(-\,root\,root) \%dir ,' > $RPM_BUILD_DIR/file.list.kshutdown
 find . -type f | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.kshutdown
 find . -type l | sed 's,^\.,\%attr(-\,root\,root) ,' >> $RPM_BUILD_DIR/file.list.kshutdown
 %clean
 rm -fr %buildroot
 rm -fr $RPM_BUILD_DIR/kshutdown
 rm -fr ../file.list.kshutdown
 %post
 /sbin/ldconfig
 %postun
 /sbin/ldconfig
 %files -f ../file.list.kshutdown
 %changelog
 * Sat Nov 26 2005 Konrad Twardowski
 - updated description
 * Mon Aug 1 2005 Konrad Twardowski <kdtonline@poczta.onet.pl>
 - removed "tdebase" from "Requires"
 * Mon Apr 4 2005 Konrad Twardowski <kdtonline@poczta.onet.pl>
 - Test RPM
--- a/kshutdown/Makefile.am
+++ b/kshutdown/Makefile.am
@ -1,44 +0,0 @@
 bin_PROGRAMS = kshutdown
 kshutdown_SOURCES = \
 	actions.cpp \
 	appobserver.cpp \
 	configuration.cpp \
 	confirmation.cpp \
 	extras.cpp \
 	kshutdowniface_skel.cpp \
 	links.cpp \
 	mactioneditdialog.cpp \
 	main.cpp \
 	miscutils.cpp \
 	mmainwindow.cpp \
 	mmessagedialog.cpp \
 	msettingsdialog.cpp \
 	mstatstab.cpp \
 	msystemtray.cpp \
 	mtip.cpp \
 	progressbar.cpp \
 	systemconfig.cpp
 kshutdown_LDADD = $(LIB_TDECORE) $(LIB_TDEUI) $(LIB_KFILE) $(LIB_TDEIO) $(LIB_QT) -lDCOP -ltdefx
 kshutdown_LDFLAGS = $(all_libraries) $(KDE_RPATH)
 EXTRA_DIST = \
 	kshutdown.desktop \
 	kshutdowniface.kidl \
 	kshutdown.upd
 appdir = $(prefix)/share/applications
 app_DATA = kshutdown.desktop
 tdeconfdir = $(kde_datadir)/tdeconf_update
 tdeconf_DATA = kshutdown.upd
 INCLUDES = $(all_includes)
 METASOURCES = AUTO
 messages:
 	LIST=`find ../kshutdown ../kshutdownlockout -name \*.h -o -name \*.cpp`; \
 	if test -n "$$LIST"; then \
 		$(XGETTEXT) $$LIST -o $(podir)/kshutdown.pot; \
 	fi
--- a/kshutdownlockout/Makefile.am
+++ b/kshutdownlockout/Makefile.am
@ -1,15 +0,0 @@
 INCLUDES = $(all_includes)
 METASOURCES = AUTO
 kde_module_LTLIBRARIES = kshutdownlockout_panelapplet.la
 kshutdownlockout_panelapplet_la_SOURCES = lockout.cpp
 kshutdownlockout_panelapplet_la_LDFLAGS = -module $(KDE_PLUGIN) $(LIB_TDECORE) $(LIB_TDEUI) $(LIB_QT) -lDCOP $(all_libraries)
 kshutdownlockout_panelapplet_la_LIBADD = $(LIB_TDESYCOCA)
 noinst_HEADERS = lockout.h
 lnkdir = $(kde_datadir)/kicker/applets
 lnk_DATA = kshutdownlockout.desktop
 EXTRA_DIST = $(lnk_DATA)
--- a/pics/Makefile.am
+++ b/pics/Makefile.am
@ -1,15 +0,0 @@
 EXTRA_DIST = \
    hi32-app-kshutdown.png \
    hi48-app-kshutdown.png \
    kshutdown.svg
 install-data-local:
 	$(mkinstalldirs) $(kde_icondir)/hicolor/32x32/apps/
 	$(INSTALL_DATA) $(srcdir)/hi32-app-kshutdown.png $(kde_icondir)/hicolor/32x32/apps/kshutdown.png
 	$(mkinstalldirs) $(kde_icondir)/hicolor/48x48/apps/
 	$(INSTALL_DATA) $(srcdir)/hi48-app-kshutdown.png $(kde_icondir)/hicolor/48x48/apps/kshutdown.png
 uninstall-local:
 	-rm -f $(kde_icondir)/hicolor/32x32/apps/kshutdown.png
 	-rm -f $(kde_icondir)/hicolor/48x48/apps/kshutdown.png
--- a/po/Makefile.am
+++ b/po/Makefile.am
@ -1,2 +0,0 @@
 POFILES = AUTO
 EXTRA_DIST = README
--- a/sounds/Makefile.am
+++ b/sounds/Makefile.am
@ -1,10 +0,0 @@
 eventsrcdir = $(kde_datadir)/kshutdown
 eventsrc_DATA = eventsrc
 soundsdir = $(kde_datadir)/kshutdown/sounds
 sounds_DATA = \
    COPYRIGHT \
    1m.ogg \
    5m.ogg
 EXTRA_DIST = $(eventsrc_DATA) $(sounds_DATA)
--- a/stamp-h.in
+++ b/stamp-h.in
@ -1 +0,0 @@
 timestamp
--- a/8
+++ b/8
@ -1,8 +0,0 @@
 doc
 extras
 karamba
 kshutdown
 kshutdownlockout
 pics
 po
 sounds
		`@ -1 +0,0 @@`
			`See: http://kshutdown.sourceforge.net/releases/`
		`@ -1 +0,0 @@`
			`Subproject commit f9148018b2f8a11fd830712c1b508046cc34ff22`