Drop automake build support.

Add basic cmake build instructions.
Delete empty file NEWS.
Rework of the README file (splitted with the FAQ).
Add FAQ file.
Rework of the desktop file.
Few cosmetics here and there.

Signed-off-by: gregory guy <gregory-tde@laposte.net>
pull/2/head
gregory guy 4 years ago
parent 68b2f0b339
commit c4ba990dcc
No known key found for this signature in database
GPG Key ID: 3BCCA0F7AB4536F4

3
.gitmodules vendored

@ -1,6 +1,3 @@
[submodule "admin"]
path = admin
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-admin
[submodule "cmake"] [submodule "cmake"]
path = cmake path = cmake
url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake url = https://system@scm.trinitydesktop.org/scm/git/tde-common-cmake

@ -41,16 +41,16 @@ tde_setup_paths( )
##### optional stuff ##### optional stuff
option( WITH_ALL_OPTIONS "Enable all optional support" OFF ) option( WITH_ALL_OPTIONS "Enable all optional support" OFF )
option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} ) option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
option( WITH_NVCONTROL "Build with NVidia control support" ${WITH_ALL_OPTIONS} ) option( WITH_NVCONTROL "Build with NVidia control support" ${WITH_ALL_OPTIONS} )
##### user requested modules ##### user requested modules
option( BUILD_ALL "Build all" ON ) option( BUILD_ALL "Build all" ON )
option( BUILD_DOC "Build documentation" ${BUILD_ALL} ) option( BUILD_DOC "Build documentation" ${BUILD_ALL} )
option( BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL} ) option( BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL} )
##### configure checks ##### configure checks
@ -70,7 +70,7 @@ set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined"
##### directories ##### directories
add_subdirectory( src ) add_subdirectory( src )
tde_conditional_add_subdirectory( BUILD_DOC doc ) tde_conditional_add_subdirectory( BUILD_DOC doc )
tde_conditional_add_subdirectory( BUILD_TRANSLATIONS po ) tde_conditional_add_subdirectory( BUILD_TRANSLATIONS po )

39
FAQ

@ -0,0 +1,39 @@
Termal sensors provided by hddtemp daemon:
==========================================
Make sure hddtemp runs on 127.0.0.1 port 7634 before kima starts.
CPU Frequency Daemon Notes:
===========================
If you have cpufreqd configured and running on your machine, Kima will
provide a sub-menu called "Performance Profiles" where you can choose
one of the preconfigured profiles for cpufreqd.
Choosing one of the profiles will automatically put cpufreqd in manual
mode.
You can use "Select dynamically" option from the menu to return back to
the dynamic scaling.
Please don't forget to enable cpufreqd remote controlling in
cpufreqd.conf (enable_remote=1) and give enough permissions to cpufreqd
socket ("remote_group" option in cpufreqd.conf, see man pages for details).
Known limitations:
- cpufreqd should be started before Kima (it's not a problem when you
do everything from your startup scripts)
- Since cpufreqd does not provide means to detect its current mode
(manual/dynamic), in rare cases "Select dynamically" check can be
inconsistent with the real daemon state. This is inconvenient but
does not affect program functionality.
NVidia thermal source notes:
============================
By default the nvidia-settings tool is used to obtain the GPU temperature.
The configure switch "-with-nvcontrol=/absolute/path/to/libnvcontrol-dir"
can be used to increase Kimas performance.
Using this switch the libXNVCtrl.a gets statically compiled/linked into
libkima.so and is used to query the temperature(s) of your NVidia card.
The most recent nvidia-settings sourcecode can be downloaded
from: ftp://download.nvidia.com/XFree86/nvidia-settings.
Here is an usage example:
./configure --prefix=$(tde-config --prefix) --with-nvcontrol=/home/$USER/nvidia-settings-1.0/src/libXNVCtrl

@ -1,167 +1,29 @@
Basic Installation Basic Installation
================== ==================
These are generic installation instructions. kima relies on cmake to build.
The `configure' shell script attempts to guess correct values for Here are suggested default options:
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
to figure out how `configure' could check whether to do them, and mail -DCONFIG_INSTALL_DIR="/etc/trinity" \
diffs or instructions to the address given in the `README' so they can -DSYSCONF_INSTALL_DIR="/etc" \
be considered for the next release. If at some point `config.cache' -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
contains results you don't want to keep, you may remove or edit it. -DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON" \
-DWITH_ALL_OPTIONS="ON"
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is: Requirements:
=============
1. `cd' to the directory containing the package's source code and type - tdelibs
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes a while. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package. Optional:
=========
3. Type `make install' to install the programs and any data files and
documentation.
4. You can remove the program binaries and object files from the
source code directory by typing `make clean'.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made.
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.
- libxnvctrl |(NVidia )
- Xext |

@ -1,22 +0,0 @@
SUBDIRS = $(TOPSUBDIRS)
$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
$(top_srcdir)/subdirs:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
@cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files
package-messages:
cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages
$(MAKE) -C po merge
EXTRA_DIST = admin COPYING configure.in.in
dist-hook:
cd $(top_distdir) && perl admin/am_edit -padmin
cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs

@ -1,10 +0,0 @@
all:
@echo "This Makefile is only for the CVS repository"
@echo "This will be deleted before making the distribution"
@echo ""
$(MAKE) -f admin/Makefile.common cvs
dist:
$(MAKE) -f admin/Makefile.common dist
.SILENT:

@ -1,68 +1,65 @@
Description:
============
This applet monitors various temperature, frequency and fan sources in your kicker panel.
Make sure you have enabled a supported kernel module.
kima - a kicker's applet for TDE.
This applet monitors various temperature, frequency and fan sources from
your kicker panel.
Licence:
========
GPLv2
Features: Features:
========= =========
supported thermal sources: supported thermal sources:
- the Linux ACPI Thermal Zone driver. The corresponding kernel module is called thermal. - the Linux ACPI Thermal Zone driver. The corresponding kernel module
- the thermal sources of the Linux ACPI driver for the IBM ThinkPad laptops. The corresponding kernel module is called ibm-acpi. is called thermal.
- the IBM Hard Drive Active Protection System (HDAPS) driver. The corresponding kernel module is called hdaps. - the thermal sources of the Linux ACPI driver for the IBM ThinkPad
- the Omnibook Configuration Tools & Patches. The corresponding kernel module is called omnibook. laptops. The corresponding kernel module is called ibm-acpi.
- the iBook G4 CPU and GPU thermal zones. It may work on other Apple machines as well (please let me know). - the IBM Hard Drive Active Protection System (HDAPS) driver.
The corresponding kernel module is called hdaps.
- the Omnibook Configuration Tools & Patches.
The corresponding kernel module is called omnibook.
- the iBook G4 CPU and GPU thermal zones.
- the thermal sensors available through hwmon (I2C, lm_sensors, ...). - the thermal sensors available through hwmon (I2C, lm_sensors, ...).
- the CPU thermal sensor of the i8k kernel driver for Dell Inspiron and Latitude notebooks. - the CPU thermal sensor of the i8k kernel driver for Dell Inspiron and
- the GPU thermal sensors of nvidia-settings (provided by the nVidia GPU card driver tools, see NVidia notes below) Latitude notebooks.
- the termal sensors provided by hddtemp daemon (make sure hddtemp runs on 127.0.0.1 port 7634 before kima starts) - the GPU thermal sensors of nvidia-settings.
(provided by the nVidia GPU card driver tools, see FAQ notes below)
- the termal sensors provided by hddtemp daemon.
supported frequency sources: supported frequency sources:
- the Linux kernel /proc/cpuinfo interface - the Linux kernel /proc/cpuinfo interface
- the Linux kernel cpufreq subsystem - the Linux kernel cpufreq subsystem
supported fan sources: supported fan sources:
- the fan sensors available through hwmon (I2C, lm_sensors, ...). - the fan sensors available through hwmon (I2C, lm_sensors, ...).
- the fan sources of the Linux ACPI driver for the IBM ThinkPad laptops. The corresponding kernel module is called ibm-acpi. - the fan sources of the Linux ACPI driver for the IBM ThinkPad laptops.
- the fan sources of the i8k kernel driver for Dell Inspiron and Latitude notebooks. The corresponding kernel module is called ibm-acpi.
- the fan sources of the i8k kernel driver for Dell Inspiron and
Latitude notebooks.
misc sources:
- battery source that displays the state of charge of your batteries through libhal
- uptime source that displays the current system uptime
misc: misc sources:
- cpufreqd control module to switch cpufreqd profiles via cpufreqd remote interface - battery source that displays the state of charge of your batteries
through libhal.
- uptime source that displays the current system uptime.
installation:
=============
run configure:
./configure --prefix=$(tde-config --prefix)
build the sources:
make
install the applet (with appropriate rights): misc:
su -c "make install" - cpufreqd control module to switch cpufreqd profiles via cpufreqd
remote interface.
finally add the applet to your TDE panel (RMB on kicker)
CPU Frequency Daemon Notes: CONTRIBUTING
=========================== ==============
If you have cpufreqd configured and running on your machine, Kima will provide a sub-menu called "Performance Profiles" where you can choose one of the preconfigured profiles for cpufreqd. Choosing one of the profiles will automatically put cpufreqd in manual mode. You can use "Select dynamically" option from the menu to return back to the dynamic scaling. Please don't forget to enable cpufreqd remote controlling in cpufreqd.conf (enable_remote=1) and give enough permissions to cpufreqd socket ("remote_group" option in cpufreqd.conf, see man pages for details).
Known limitations:
- cpufreqd should be started before Kima (it's not a problem when you do everything from your startup scripts)
- Since cpufreqd does not provide means to detect its current mode (manual/dynamic), in rare cases "Select dynamically" check can be inconsistent with the real daemon state. This is inconvenient but does not affect program functionality.
If you wish to contribute to Kima, you might do so:
NVidia thermal source notes: - TDE Gitea Workspace (TGW) collaboration tool.
============================ https://mirror.git.trinitydesktop.org/gitea
By default the nvidia-settings tool is used to obtain the GPU temperature. The configure switch "-with-nvcontrol=/absolute/path/to/libnvcontrol-dir" can be used to increase Kimas performance. Using this switch the libXNVCtrl.a gets statically compiled/linked into libkima.so and is used to query the temperature(s) of your NVidia card. The most recent nvidia-settings sourcecode can be downloaded from: ftp://download.nvidia.com/XFree86/nvidia-settings. Here is an usage example:
./configure --prefix=$(tde-config --prefix) --with-nvcontrol=/home/$USER/nvidia-settings-1.0/src/libXNVCtrl
- TDE Weblate Translation Workspace (TWTW) collaboration tool.
https://mirror.git.trinitydesktop.org/weblate

@ -1 +0,0 @@
Subproject commit ae96f3ea4882e243513827da7c2ab889af3b1608

@ -1,268 +0,0 @@
/* config.h.in. Generated from configure.in by autoheader. */
/* Define if building universal (internal helper macro) */
#undef AC_APPLE_UNIVERSAL_BUILD
/* Define to 1 if you have the <Carbon/Carbon.h> header file. */
#undef HAVE_CARBON_CARBON_H
/* Define if you have the CoreAudio API */
#undef HAVE_COREAUDIO
/* Define to 1 if you have the <crt_externs.h> header file. */
#undef HAVE_CRT_EXTERNS_H
/* Defines if your system has the crypt function */
#undef HAVE_CRYPT
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define if you have libjpeg */
#undef HAVE_LIBJPEG
/* Define if you have libpng */
#undef HAVE_LIBPNG
/* Define if you have a working libpthread (will enable threaded code) */
#undef HAVE_LIBPTHREAD
/* Define if you have libz */
#undef HAVE_LIBZ
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define if your system needs _NSGetEnviron to set up the environment */
#undef HAVE_NSGETENVIRON
/* defined if compiling with NVControl support */
#undef HAVE_NVCONTROL
/* Define if you have res_init */
#undef HAVE_RES_INIT
/* Define if you have the res_init prototype */
#undef HAVE_RES_INIT_PROTO
/* Define if you have a STL implementation by SGI */
#undef HAVE_SGI_STL
/* Define to 1 if you have the `snprintf' function. */
#undef HAVE_SNPRINTF
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define if you have strlcat */
#undef HAVE_STRLCAT
/* Define if you have the strlcat prototype */
#undef HAVE_STRLCAT_PROTO
/* Define if you have strlcpy */
#undef HAVE_STRLCPY
/* Define if you have the strlcpy prototype */
#undef HAVE_STRLCPY_PROTO
/* Define to 1 if you have the <sys/bitypes.h> header file. */
#undef HAVE_SYS_BITYPES_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if you have the `vsnprintf' function. */
#undef HAVE_VSNPRINTF
/* Suffix for lib directories */
#undef KDELIBSUFF
/* Define a safe value for MAXPATHLEN */
#undef KDEMAXPATHLEN
/* Define to the sub-directory in which libtool stores uninstalled libraries.
*/
#undef LT_OBJDIR
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* The size of `char *', as computed by sizeof. */
#undef SIZEOF_CHAR_P
/* The size of `int', as computed by sizeof. */
#undef SIZEOF_INT
/* The size of `long', as computed by sizeof. */
#undef SIZEOF_LONG
/* The size of `short', as computed by sizeof. */
#undef SIZEOF_SHORT
/* The size of `size_t', as computed by sizeof. */
#undef SIZEOF_SIZE_T
/* The size of `unsigned long', as computed by sizeof. */
#undef SIZEOF_UNSIGNED_LONG
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Defined if compiling without arts */
#undef WITHOUT_ARTS
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
significant byte first (like Motorola and SPARC, unlike Intel). */
#if defined AC_APPLE_UNIVERSAL_BUILD
# if defined __BIG_ENDIAN__
# define WORDS_BIGENDIAN 1
# endif
#else
# ifndef WORDS_BIGENDIAN
# undef WORDS_BIGENDIAN
# endif
#endif
/*
* jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system
* headers and I'm too lazy to write a configure test as long as only
* unixware is related
*/
#ifdef _UNIXWARE
#define HAVE_BOOLEAN
#endif
/*
* AIX defines FD_SET in terms of bzero, but fails to include <strings.h>
* that defines bzero.
*/
#if defined(_AIX)
#include <strings.h>
#endif
#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
# include <sys/time.h>
# include <crt_externs.h>
# define environ (*_NSGetEnviron())
#endif
#if !defined(HAVE_RES_INIT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
int res_init(void);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCAT_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcat(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
#if !defined(HAVE_STRLCPY_PROTO)
#ifdef __cplusplus
extern "C" {
#endif
unsigned long strlcpy(char*, const char*, unsigned long);
#ifdef __cplusplus
}
#endif
#endif
/*
* On HP-UX, the declaration of vsnprintf() is needed every time !
*/
#if !defined(HAVE_VSNPRINTF) || defined(hpux)
#if __STDC__
#include <stdarg.h>
#include <stdlib.h>
#else
#include <varargs.h>
#endif
#ifdef __cplusplus
extern "C"
#endif
int vsnprintf(char *str, size_t n, char const *fmt, va_list ap);
#ifdef __cplusplus
extern "C"
#endif
int snprintf(char *str, size_t n, char const *fmt, ...);
#endif
/* define to 1 if -fvisibility is supported */
#undef __KDE_HAVE_GCC_VISIBILITY
#if defined(__SVR4) && !defined(__svr4__)
#define __svr4__ 1
#endif
/* type to use in place of socklen_t if not defined */
#undef kde_socklen_t
/* type to use in place of socklen_t if not defined (deprecated, use
kde_socklen_t) */
#undef ksize_t

@ -1,2 +0,0 @@
./admin/configure.in.min
configure.in.in

@ -1,19 +0,0 @@
#MIN_CONFIG(3.0.0)
KDE_ENABLE_HIDDEN_VISIBILITY
AM_INIT_AUTOMAKE(kima, 0.7.3.2)
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
dnl check for (optional) nvcontrol
AC_ARG_WITH(nvcontrol,
AC_HELP_STRING([--with-nvcontrol=nvcontrol-dir],[uses libXNVCtrl.a instead of nvidia-settings for the NVidia thermal source]),
[with_nvcontrol=yes
nvcontrol_CFLAGS=-I$withval
nvcontrol_LIBS="-L$withval -lXNVCtrl"
AC_CHECK_FILE([$withval/NVCtrlLib.h], , AC_MSG_ERROR([Did not find NVCtrlLib.h. Make sure that you passed the correct path for NVControl. See README for details.]))
AC_DEFINE(HAVE_NVCONTROL, , [defined if compiling with NVControl support])])
AC_SUBST(nvcontrol_CFLAGS)
AC_SUBST(nvcontrol_LIBS)

@ -1,6 +0,0 @@
# the SUBDIRS is filled automatically by am_edit. If files are
# in this directory they are installed into the english dir
KDE_LANG = en
KDE_DOCS = kima
SUBDIRS = $(AUTODIRS)

@ -1,2 +0,0 @@
KDE_DOCS = kima
KDE_LANG = en

@ -1,5 +1,14 @@
file( GLOB _srcs RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.po ) file( GLOB_RECURSE po_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.po )
string( REGEX REPLACE "[ \r\n\t]+" ";" _linguas "$ENV{LINGUAS}" )
if( _srcs ) foreach( _po ${po_files} )
tde_create_translation( LANG auto OUTPUT_NAME ${PROJECT_NAME} ) get_filename_component( _lang ${_po} NAME_WE )
endif( ) if( "${_linguas}" MATCHES "^;*$" OR ";${_linguas};" MATCHES ";${_lang};" )
if( "${_po}" MATCHES "^([^/]*)/.*" )
string( REGEX REPLACE "^([^/]*)/.*" "\\1" _component "${_po}" )
else( )
set( _component "${PROJECT_NAME}" )
endif( )
tde_create_translation( FILES ${_po} LANG ${_lang} OUTPUT_NAME ${_component} )
endif( )
endforeach( )

@ -1,2 +0,0 @@
#POFILES = AUTO
POFILES = de.po es.po hu.po sv.po tr.po id.po

@ -1,5 +1,5 @@
add_subdirectory( cpufreqd ) add_subdirectory( cpufreqd )
add_subdirectory( sources ) add_subdirectory( sources )
include_directories( include_directories(
${CMAKE_BINARY_DIR} ${CMAKE_BINARY_DIR}
@ -36,7 +36,7 @@ tde_add_kpart( libkima AUTOMOC
##### other data ##### other data
install( tde_create_translated_desktop(
FILES ${PROJECT_NAME}.desktop ${PROJECT_NAME}.desktop
DESTINATION ${DATA_INSTALL_DIR}/kicker/applets DESTINATION ${DATA_INSTALL_DIR}/kicker/applets
) )

@ -1,22 +0,0 @@
INCLUDES = -I$(top_srcdir)/src/cpufreqd -I$(top_srcdir)/src/sources \
$(all_includes)
METASOURCES = AUTO
kde_module_LTLIBRARIES = libkima.la
libkima_la_SOURCES = kima.cpp flowlayout.cpp sourcelistitem.cpp prefs.ui
libkima_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries)
libkima_la_LIBADD = $(top_builddir)/src/cpufreqd/libcpufreqd.la \
$(top_builddir)/src/sources/libsources.la $(LIB_TDEUI)
kima_DATA = kima.desktop
kimadir = $(kde_datadir)/kicker/applets
KDE_ICON = hwinfo
EXTRA_DIST = $(kima_DATA)
messages: rc.cpp
$(XGETTEXT) *.cpp */*.cpp -o $(podir)/kima.pot
noinst_HEADERS = kima.h flowlayout.h sourcelistitem.h
SUBDIRS = cpufreqd sources

@ -1,8 +0,0 @@
INCLUDES = -I$(top_srcdir)/src/cpufreqd -I$(top_srcdir)/src/sources $(all_includes)
METASOURCES = AUTO
libcpufreqd_la_LDFLAGS = $(all_libraries)
noinst_LTLIBRARIES = libcpufreqd.la
libcpufreqd_la_SOURCES = cpufreqd.cpp cpufreqdconnection.cpp \
cpufreqdprofile.cpp
noinst_HEADERS = cpufreqd.h cpufreqdconnection.h cpufreqdprofile.h cpufreqd.h \
cpufreqdconnection.h cpufreqdprofile.h

@ -10,35 +10,14 @@ Icon=hwinfo
Name=Kima Name=Kima
Name[de]=Kima Name[de]=Kima
Name[fr]=Kima
Comment=Kicker applet that monitors various temperature, frequency and fan sources Comment=Kicker applet that monitors various temperature, frequency and fan sources
#Comment[ca]=
#Comment[cy]=
#Comment[da]=
Comment[de]=Kicker-Applet, dass verschiedene Temperatur-, Frequenz- und Lüftersensoren anzeigt. Comment[de]=Kicker-Applet, dass verschiedene Temperatur-, Frequenz- und Lüftersensoren anzeigt.
#Comment[el]=
Comment[es]=Un applet para el Kicker que monitorea varias fuentes de temperatura y velocidad de los procesadores y del cooler Comment[es]=Un applet para el Kicker que monitorea varias fuentes de temperatura y velocidad de los procesadores y del cooler
#Comment[et]= Comment[fr]=Un applet Kicker qui montre la température du CPU, sa fréquence ainsi que la vitesse du ventilateur(CPU).
Comment[fr]=Kicker applet que montre la température actuelle de CPU et la fréquence actuelle de CPU.
#Comment[hi]=
#Comment[hu]=
#Comment[is]=
Comment[it]=CpuInfo è una semplice Applet per Kicker che visualizza la frequenza e la temperatura della CPU. Comment[it]=CpuInfo è una semplice Applet per Kicker che visualizza la frequenza e la temperatura della CPU.
#Comment[ja]=
#Comment[nb]=
#Comment[nl]=
Comment[pl]=Aplet Kickera pokazujacy obecna temperature i frekwencje procesora. Comment[pl]=Aplet Kickera pokazujacy obecna temperature i frekwencje procesora.
#Comment[pt]=
#Comment[pt_BR]=
#Comment[ru]=
#Comment[sl]=
#Comment[sr]=
#Comment[sr@Latn]=
Comment[sv]=Kicker-miniprogram som övervakar olika temperatur-, frekvens- och fläktkällor Comment[sv]=Kicker-miniprogram som övervakar olika temperatur-, frekvens- och fläktkällor
#Comment[ta]=
#Comment[tg]=
Comment[tr]=Çeşitli fan, ısı ve frekans kaynaklarını izlemeye yarayan panel programcığı Comment[tr]=Çeşitli fan, ısı ve frekans kaynaklarını izlemeye yarayan panel programcığı
#Comment[zh_CN]=
Comment[id]=Applet Kicker yang memantau berbagai sumber temperatur, frekuensi, dan putaran kipas Comment[id]=Applet Kicker yang memantau berbagai sumber temperatur, frekuensi, dan putaran kipas
Terminal=false
Terminal=0

@ -1,20 +0,0 @@
INCLUDES = -I$(top_srcdir)/src/cpufreqd -I$(top_srcdir)/src/sources $(all_includes)
METASOURCES = AUTO
libsources_la_LDFLAGS = $(all_libraries)
libsources_la_LIBADD = $(LIB_TQT) $(LIB_TDECORE)
noinst_LTLIBRARIES = libsources.la
libsources_la_SOURCES = acpithermalsrc.cpp batterysrc.cpp cpuinfofreqsrc.cpp \
hddtempsrc.cpp hwmonfansrc.cpp hwmonthermalsrc.cpp i8ksrc.cpp ibmacpifansrc.cpp \
ibmacpithermalsrc.cpp ibmhdaps.cpp ibookg4thermalsrc.cpp labelsource.cpp labelsourcePrefs.ui \
nvidiathermalsrc.cpp omnibookthermalsrc.cpp source.cpp sourceprefs.ui \
sysfreqsrc.cpp threadedtrigger.cpp triggeredsource.cpp updateevent.cpp \
uptimesrc.cpp
noinst_HEADERS = acpithermalsrc.h batterysrc.h cpuinfofreqsrc.h hddtempsrc.h \
hwmonfansrc.h hwmonthermalsrc.h i8ksrc.h ibmacpifansrc.h ibmacpithermalsrc.h \
ibmhdaps.h ibookg4thermalsrc.h labelsource.h nvidiathermalsrc.h \
omnibookthermalsrc.h source.h sysfreqsrc.h \
threadedtrigger.h triggeredsource.h updateevent.h uptimesrc.h
AM_CXXFLAGS = @nvcontrol_CFLAGS@
LIBS += @nvcontrol_LIBS@

@ -1,3 +0,0 @@
doc
po
src
Loading…
Cancel
Save