Conversion to the cmake building system.

Signed-off-by: Slávek Banko <slavek.banko@axis.cz>
pull/2/head
Slávek Banko 2 years ago
parent 83f3d0a111
commit fe56f701d7
No known key found for this signature in database
GPG Key ID: 608F5293A04BE668

@ -0,0 +1,80 @@
############################################
# #
# Improvements and feedbacks are welcome #
# #
# This file is released under GPL >= 3 #
# #
############################################
cmake_minimum_required( VERSION 3.1 )
#### general package setup
project( gtk3-tqt-engine )
#### include essential cmake modules
include( FindPkgConfig )
include( CheckFunctionExists )
include( CheckSymbolExists )
include( CheckIncludeFile )
include( CheckLibraryExists )
include( CheckCSourceCompiles )
include( CheckCXXSourceCompiles )
#### include our cmake modules
include( TDEMacros )
enable_testing( )
##### set version number ########################
tde_set_project_version( )
##### setup install paths
include( TDESetupPaths )
tde_setup_paths( )
##### optional stuff
option( WITH_ALL_OPTIONS "Enable all optional support" OFF )
option( WITH_GCC_VISIBILITY "Enable fvisibility and fvisibility-inlines-hidden" ${WITH_ALL_OPTIONS} )
##### user requested modules
option( BUILD_ALL "Build all" ON )
option( BUILD_TESTS "Build test programs" ${BUILD_ALL} )
##### configure checks
include( ConfigureChecks.cmake )
###### global compiler settings
add_definitions( -DHAVE_CONFIG_H )
set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${TQT_CXX_FLAGS}" )
set( CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -Wl,--no-undefined" )
set( CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -Wl,--no-undefined" )
##### directories
add_subdirectory( rc )
add_subdirectory( tdegtk )
tde_conditional_add_subdirectory( BUILD_TESTS tests )
##### write configure files
configure_file( config.h.cmake config.h @ONLY )

@ -0,0 +1,59 @@
###########################################
# #
# Improvements and feedback are welcome #
# #
# This file is released under GPL >= 3 #
# #
###########################################
# required stuff
find_package( TQt )
find_package( TDE )
tde_setup_architecture_flags( )
include(TestBigEndian)
test_big_endian(WORDS_BIGENDIAN)
tde_setup_largefiles( )
##### check for gcc visibility support
if( WITH_GCC_VISIBILITY )
tde_setup_gcc_visibility( )
endif( WITH_GCC_VISIBILITY )
#### cairo
pkg_search_module( CAIRO cairo )
if( NOT CAIRO_FOUND )
tde_message_fatal( "cairo is required but was not found on your system" )
endif( )
#### gtk+-3.0
pkg_search_module( GTK3 gtk+-3.0 )
if( NOT GTK3_FOUND )
tde_message_fatal( "gtk3 is required but was not found on your system" )
endif( )
execute_process(
COMMAND ${PKG_CONFIG_EXECUTABLE}
gtk+-3.0 --variable=gtk_binary_version
OUTPUT_VARIABLE GTK3_BIN_VERSION
OUTPUT_STRIP_TRAILING_WHITESPACE
)
#### pango
pkg_search_module( PANGO pango )
if( NOT PANGO_FOUND )
tde_message_fatal( "pango is required but was not found on your system" )
endif( )

@ -1,365 +1,24 @@
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation Basic Installation
================== ==================
Briefly, the shell commands `./configure; make; make install' should gtk3-tqt-engine relies on cmake to build.
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR' Here are suggested default options:
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR' -DCMAKE_INSTALL_PREFIX="/opt/trinity" \
Use DIR as the installation prefix. *note Installation Names:: -DCONFIG_INSTALL_DIR="/etc/trinity" \
for more details, including other options available for fine-tuning -DSYSCONF_INSTALL_DIR="/etc/trinity" \
the installation locations. -DXDG_MENU_INSTALL_DIR="/etc/xdg/menus" \
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_VERBOSE_MAKEFILE="ON" \
-DCMAKE_SKIP_RPATH="OFF" \
-DBUILD_ALL="ON" \
-DWITH_ALL_OPTIONS="ON"
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
`configure' also accepts some other, not widely useful, options. Run Requirements:
`configure --help' for more details. =============
- cairo
- gtk+-3.0
- pango

@ -0,0 +1,18 @@
GTK3-tqt-engine - GTK3 theme engine for TDE
GTK3 style engine which uses the active TDE style to draw its widgets.
.
Contributing
--------------
If you wish to contribute to gtk3-tqt-engine, you might do so:
- TDE Gitea Workspace (TGW) collaboration tool.
https://mirror.git.trinitydesktop.org/gitea
- TDE Weblate Translation Workspace (TWTW) collaboration tool.
https://mirror.git.trinitydesktop.org/weblate

@ -0,0 +1,8 @@
#define VERSION "@VERSION@"
// Defined if you have fvisibility and fvisibility-inlines-hidden support.
#cmakedefine __KDE_HAVE_GCC_VISIBILITY 1
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
significant byte first (like Motorola and SPARC, unlike Intel). */
#cmakedefine WORDS_BIGENDIAN @WORDS_BIGENDIAN@

@ -1,217 +0,0 @@
# Makefile for program source directory in GNU NLS utilities package.
# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
# Copyright (C) 2004-2008 Rodney Dawes <dobey.pwns@gmail.com>
#
# This file may be copied and used freely without restrictions. It may
# be used in projects which are not available under a GNU Public License,
# but which still want to provide support for the GNU gettext functionality.
#
# - Modified by Owen Taylor <otaylor@redhat.com> to use GETTEXT_PACKAGE
# instead of PACKAGE and to look for po2tbl in ./ not in intl/
#
# - Modified by jacob berkman <jacob@ximian.com> to install
# Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
#
# - Modified by Rodney Dawes <dobey.pwns@gmail.com> for use with intltool
#
# We have the following line for use by intltoolize:
# INTLTOOL_MAKEFILE
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
top_builddir = @top_builddir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
datadir = @datadir@
datarootdir = @datarootdir@
libdir = @libdir@
DATADIRNAME = @DATADIRNAME@
itlocaledir = $(prefix)/$(DATADIRNAME)/locale
subdir = po
install_sh = @install_sh@
# Automake >= 1.8 provides @mkdir_p@.
# Until it can be supposed, use the safe fallback:
mkdir_p = $(install_sh) -d
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
XGETTEXT = @XGETTEXT@
INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
MSGMERGE = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist
GENPOT = INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot
ALL_LINGUAS = @ALL_LINGUAS@
PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; else echo "$(ALL_LINGUAS)"; fi)
USER_LINGUAS=$(shell if test -n "$(LINGUAS)"; then LLINGUAS="$(LINGUAS)"; ALINGUAS="$(ALL_LINGUAS)"; for lang in $$LLINGUAS; do if test -n "`grep \^$$lang$$ $(srcdir)/LINGUAS 2>/dev/null`" -o -n "`echo $$ALINGUAS|tr ' ' '\n'|grep \^$$lang$$`"; then printf "$$lang "; fi; done; fi)
USE_LINGUAS=$(shell if test -n "$(USER_LINGUAS)" -o -n "$(LINGUAS)"; then LLINGUAS="$(USER_LINGUAS)"; else if test -n "$(PO_LINGUAS)"; then LLINGUAS="$(PO_LINGUAS)"; else LLINGUAS="$(ALL_LINGUAS)"; fi; fi; for lang in $$LLINGUAS; do printf "$$lang "; done)
POFILES=$(shell LINGUAS="$(PO_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.po "; done)
DISTFILES = Makefile.in.in POTFILES.in $(POFILES)
EXTRA_DISTFILES = ChangeLog POTFILES.skip Makevars LINGUAS
POTFILES = \
# This comment gets stripped out
CATALOGS=$(shell LINGUAS="$(USE_LINGUAS)"; for lang in $$LINGUAS; do printf "$$lang.gmo "; done)
.SUFFIXES:
.SUFFIXES: .po .pox .gmo .mo .msg .cat
.po.pox:
$(MAKE) $(GETTEXT_PACKAGE).pot
$(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox
.po.mo:
$(MSGFMT) -o $@ $<
.po.gmo:
file=`echo $* | sed 's,.*/,,'`.gmo \
&& rm -f $$file && $(GMSGFMT) -o $$file $<
.po.cat:
sed -f ../intl/po2msg.sed < $< > $*.msg \
&& rm -f $@ && gencat $@ $*.msg
all: all-@USE_NLS@
all-yes: $(CATALOGS)
all-no:
$(GETTEXT_PACKAGE).pot: $(POTFILES)
$(GENPOT)
install: install-data
install-data: install-data-@USE_NLS@
install-data-no: all
install-data-yes: all
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \
$(mkdir_p) $$dir; \
if test -r $$lang.gmo; then \
$(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \
else \
$(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
echo "installing $(srcdir)/$$lang.gmo as" \
"$$dir/$(GETTEXT_PACKAGE).mo"; \
fi; \
if test -r $$lang.gmo.m; then \
$(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \
echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \
else \
if test -r $(srcdir)/$$lang.gmo.m ; then \
$(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \
$$dir/$(GETTEXT_PACKAGE).mo.m; \
echo "installing $(srcdir)/$$lang.gmo.m as" \
"$$dir/$(GETTEXT_PACKAGE).mo.m"; \
else \
true; \
fi; \
fi; \
done
# Empty stubs to satisfy archaic automake needs
dvi info ctags tags CTAGS TAGS ID:
# Define this as empty until I found a useful application.
install-exec installcheck:
uninstall:
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
done
check: all $(GETTEXT_PACKAGE).pot
rm -f missing notexist
srcdir=$(srcdir) $(INTLTOOL_UPDATE) -m
if [ -r missing -o -r notexist ]; then \
exit 1; \
fi
mostlyclean:
rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp
rm -f .intltool-merge-cache
clean: mostlyclean
distclean: clean
rm -f Makefile Makefile.in POTFILES stamp-it
rm -f *.mo *.msg *.cat *.cat.m *.gmo
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f Makefile.in.in
distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir: $(DISTFILES)
dists="$(DISTFILES)"; \
extra_dists="$(EXTRA_DISTFILES)"; \
for file in $$extra_dists; do \
test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \
done; \
for file in $$dists; do \
test -f $$file || file="$(srcdir)/$$file"; \
ln $$file $(distdir) 2> /dev/null \
|| cp -p $$file $(distdir); \
done
update-po: Makefile
$(MAKE) $(GETTEXT_PACKAGE).pot
tmpdir=`pwd`; \
linguas="$(USE_LINGUAS)"; \
for lang in $$linguas; do \
echo "$$lang:"; \
result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \
if $$result; then \
if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
rm -f $$tmpdir/$$lang.new.po; \
else \
if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
:; \
else \
echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
rm -f $$tmpdir/$$lang.new.po; \
exit 1; \
fi; \
fi; \
else \
echo "msgmerge for $$lang.gmo failed!"; \
rm -f $$tmpdir/$$lang.new.po; \
fi; \
done
Makefile POTFILES: stamp-it
@if test ! -f $@; then \
rm -f stamp-it; \
$(MAKE) stamp-it; \
fi
stamp-it: Makefile.in.in $(top_builddir)/config.status POTFILES.in
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \
$(SHELL) ./config.status
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

@ -0,0 +1,7 @@
##### other data
install(
FILES gtk.css
DESTINATION ${GTK3_PREFIX}/share/themes/tdegtk/gtk-3.0
)

@ -0,0 +1,69 @@
include_directories(
${CMAKE_CURRENT_BINARY_DIR}
${CMAKE_CURRENT_SOURCE_DIR}
${CMAKE_BINARY_DIR}
${TDE_INCLUDE_DIR}
${TQT_INCLUDE_DIRS}
${CAIRO_INCLUDE_DIRS}
${GTK3_INCLUDE_DIRS}
${PANGO_INCLUDE_DIRS}
)
link_directories(
${TQT_LIBRARY_DIRS}
${TDE_LIB_DIR}
${CAIRO_LIBARY_DIRS}
${GTK3_LIBRARY_DIRS}
${PANGO_LIBRARY_DIRS}
)
##### tqtcairo (shared)
tde_add_library( tqtcairo SHARED AUTOMOC
SOURCES
tqtcairopainter.cpp
LINK
tdeui-shared
${GLADE_LIBRARIES}
${GTK3_LIBRARIES}
VERSION 0.0.0
DESTINATION ${LIB_INSTALL_DIR}
)
##### tdegtk (shared)
tde_add_library( tdegtk SHARED AUTOMOC
SOURCES
exponential-blur.c
gtkroundedbox.c
tdegtk-cairo-support.c
tdegtk-draw.cpp
tdegtk-engine.c
tdegtk-support.c
tdegtk-hooks.cpp
tdegtk-signals.cpp
tdegtk-widgetlookup.cpp
tdegtk-utils.cpp
tdegtk-tabwidgetdata.cpp
tdegtk-animations.cpp
tdegtk-baseengine.cpp
tdegtk-theme.cpp
LINK
tdecore-shared
tdeui-shared
tqtcairo-shared
${GLADE_LIBRARIES}
${GTK3_LIBRARIES}
VERSION 0.0.0
DESTINATION ${GTK3_LIBDIR}/gtk-3.0/${GTK3_BIN_VERSION}/theming-engines
)

@ -1727,7 +1727,7 @@ tdegtk_draw_common_frame (DRAW_ARGS)
state = gtk_theming_engine_get_state(engine); state = gtk_theming_engine_get_state(engine);
widget = m_widgetLookup.find(cr, path); widget = m_widgetLookup.find(cr, path);
TQString widgetPath(Gtk::gtk_widget_path(widget)); TQString widgetPath(Gtk::gtk_widget_path(widget).c_str());
if (gtk_theming_engine_has_class(engine, GTK_STYLE_CLASS_SCROLLBAR)) { if (gtk_theming_engine_has_class(engine, GTK_STYLE_CLASS_SCROLLBAR)) {
#ifdef DRAW_SCROLLBAR_PIECES_INSTEAD_OF_ENTIRE_BAR #ifdef DRAW_SCROLLBAR_PIECES_INSTEAD_OF_ENTIRE_BAR

@ -1,5 +1,5 @@
#ifndef tdegtk_tabwidgetdata_h #ifndef tdegtk_tabwidgetdata_h
#define tdegtk_widgetdata_h #define tdegtk_tabwidgetdata_h
/* /*
* this file was largely taken from the oxygen gtk engine * this file was largely taken from the oxygen gtk engine
* Copyright (c) 2010 Hugo Pereira Da Costa <hugo@oxygen-icons.org> * Copyright (c) 2010 Hugo Pereira Da Costa <hugo@oxygen-icons.org>

@ -48,23 +48,24 @@ bool m_scrollbarBack2 = false;
bool m_scrollbarForward2 = false; bool m_scrollbarForward2 = false;
#include <gmodule.h> #include <gmodule.h>
#include <kdemacros.h>
extern "C" { extern "C" {
#include <gtk/gtk.h> #include <gtk/gtk.h>
#include "tdegtk-engine.h" #include "tdegtk-engine.h"
G_MODULE_EXPORT void theme_init(GTypeModule *module); KDE_EXPORT void theme_init(GTypeModule *module);
G_MODULE_EXPORT void theme_exit(void); KDE_EXPORT void theme_exit(void);
G_MODULE_EXPORT GtkThemingEngine* create_engine(void); KDE_EXPORT GtkThemingEngine* create_engine(void);
G_MODULE_EXPORT void theme_init(GTypeModule *module) { KDE_EXPORT void theme_init(GTypeModule *module) {
tdegtk_engine_register_types(module); tdegtk_engine_register_types(module);
} }
G_MODULE_EXPORT void theme_exit(void) { KDE_EXPORT void theme_exit(void) {
// //
} }
} }
@ -200,7 +201,7 @@ TQString tdeFindDir(const TQString& suffix, const TQString& file1, const TQStrin
} }
TQString runCommand(const TQString& command) { TQString runCommand(const TQString& command) {
FILE* p = popen(command.latin1(), "r"); FILE* p = popen(command.local8Bit(), "r");
if (p == NULL) { if (p == NULL) {
return TQString(); return TQString();
} }
@ -344,7 +345,7 @@ GtkIconSet* generateIconSet(const std::string& gtkIconName, const std::string& t
// loop over provided path to see if at least one icon is found // loop over provided path to see if at least one icon is found
for (TQStringList::const_iterator pathIter = pathList.begin(); pathIter != pathList.end(); ++pathIter) { for (TQStringList::const_iterator pathIter = pathList.begin(); pathIter != pathList.end(); ++pathIter) {
std::string filename((*pathIter + '/' + iconFileStream.str()).latin1()); std::string filename((*pathIter + '/' + iconFileStream.str().c_str()).local8Bit());
if (!std::ifstream(filename.c_str())) { if (!std::ifstream(filename.c_str())) {
continue; continue;
} }
@ -410,7 +411,7 @@ void setColour(TQString name, TQString state, TQColor color, TQString widgetType
if (state == ":normal") { if (state == ":normal") {
state = ""; state = "";
} }
gtk3_tqt_load_resource_string(parse_rc_string(name + ": " + colorString(color), widgetTypes + state).latin1()); gtk3_tqt_load_resource_string(parse_rc_string(name + ": " + colorString(color), widgetTypes + state).local8Bit());
} }
static TQStringList iconInheritsDirs(const TQString& icondir) { static TQStringList iconInheritsDirs(const TQString& icondir) {
@ -756,7 +757,7 @@ void writeGtkThemeControlFile(int forceRecreate) {
// This cache matches the current icon theme and style // This cache matches the current icon theme and style
themeFile.close(); themeFile.close();
gtk3_tqt_reload_theme_definition_file(themeFilePath.latin1()); gtk3_tqt_reload_theme_definition_file(themeFilePath.local8Bit());
return; return;
} }
@ -766,7 +767,7 @@ void writeGtkThemeControlFile(int forceRecreate) {
if (gtk3TQtDebug) { if (gtk3TQtDebug) {
// Load possibly modified theme control file before writing a new one // Load possibly modified theme control file before writing a new one
gtk3_tqt_reload_theme_definition_file(themeFilePath.latin1()); gtk3_tqt_reload_theme_definition_file(themeFilePath.local8Bit());
} }
themeFile.open(IO_WriteOnly | IO_Truncate); themeFile.open(IO_WriteOnly | IO_Truncate);
@ -1029,7 +1030,7 @@ void writeGtkThemeControlFile(int forceRecreate) {
themeFile.close(); themeFile.close();
if (!gtk3TQtDebug) { if (!gtk3TQtDebug) {
gtk3_tqt_reload_theme_definition_file(themeFilePath.latin1()); gtk3_tqt_reload_theme_definition_file(themeFilePath.local8Bit());
} }
} }
// ========================================================================================================= // =========================================================================================================

@ -0,0 +1,47 @@
include_directories(
${CMAKE_CURRENT_BINARY_DIR}
${CMAKE_CURRENT_SOURCE_DIR}
${CMAKE_SOURCE_DIR}/tdegtk
${CMAKE_BINARY_DIR}
${TDE_INCLUDE_DIR}
${TQT_INCLUDE_DIRS}
${CAIRO_INCLUDE_DIRS}
${GTK3_INCLUDE_DIRS}
${PANGO_INCLUDE_DIRS}
)
link_directories(
${TQT_LIBRARY_DIRS}
${TDE_LIB_DIR}
${CAIRO_LIBRARY_DIRS}
${GTK3_LIBRARY_DIRS}
${PANGO_LIBRARY_DIRS}
)
##### test-widgets (executable)
tde_add_check_executable( test-widgets AUTOMOC
SOURCES
test-widgets.c
LINK
${CAIRO_LIBRARIES}
${GTK3_LIBRARIES}
)
##### test-painter (executable)
tde_add_check_executable( test-painter AUTOMOC
SOURCES
test-painter.cpp
LINK
tqtcairo-shared
tdeui-shared
${CAIRO_LIBRARIES}
${GTK3_LIBRARIES}
)
Loading…
Cancel
Save