rename the following methods:

tqfind find
tqreplace replace
tqcontains contains


git-svn-id: svn://anonsvn.kde.org/home/kde/branches/trinity/dependencies/arts@1246075 283d02a7-25f6-0310-bc7c-ecb5cbfe19da

COPYING

@@ -65,7 +65,7 @@ modification follow.
 		    GNU GENERAL PUBLIC LICENSE
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
-  0. This License applies to any program or other work which tqcontains
+  0. This License applies to any program or other work which contains
 a notice placed by the copyright holder saying it may be distributed
 under the terms of this General Public License.  The "Program", below,
 refers to any such program or work, and a "work based on the Program"
@@ -102,7 +102,7 @@ above, provided that you also meet all of these conditions:
     stating that you changed the files and the date of any change.
 
     b) You must cause any work that you distribute or publish, that in
-    whole or in part tqcontains or is derived from the Program or any
+    whole or in part contains or is derived from the Program or any
     part thereof, to be licensed as a whole at no charge to all third
     parties under the terms of this License.
 
@@ -160,7 +160,7 @@ Sections 1 and 2 above provided that you also do one of the following:
 
 The source code for a work means the preferred form of the work for
 making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it tqcontains, plus any
+code means all the source code for all modules it contains, plus any
 associated interface definition files, plus the scripts used to
 control compilation and installation of the executable.  However, as a
 special exception, the source code distributed need not include

COPYING.LIB

@@ -99,7 +99,7 @@ will lead to faster development of free libraries.
   The precise terms and conditions for copying, distribution and
 modification follow.  Pay close attention to the difference between a
 "work based on the library" and a "work that uses the library".  The
-former tqcontains code derived from the library, while the latter only
+former contains code derived from the library, while the latter only
 works together with the library.
 
   Note that it is possible for a library to be covered by the ordinary
@@ -109,7 +109,7 @@ General Public License rather than by this special one.
    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
 
   0. This License Agreement applies to any software library which
-tqcontains a notice placed by the copyright holder or other authorized
+contains a notice placed by the copyright holder or other authorized
 party saying it may be distributed under the terms of this Library
 General Public License (also called "this License").  Each licensee is
 addressed as "you".
@@ -128,7 +128,7 @@ included without limitation in the term "modification".)
 
   "Source code" for a work means the preferred form of the work for
 making modifications to it.  For a library, complete source code means
-all the source code for all modules it tqcontains, plus any associated
+all the source code for all modules it contains, plus any associated
 interface definition files, plus the scripts used to control compilation
 and installation of the library.
 
@@ -230,7 +230,7 @@ source code from the same place satisfies the requirement to
 distribute the source code, even though third parties are not
 compelled to copy the source along with the object code.
 
-  5. A program that tqcontains no derivative of any portion of the
+  5. A program that contains no derivative of any portion of the
 Library, but is designed to work with the Library by being compiled or
 linked with it, is called a "work that uses the Library".  Such a
 work, in isolation, is not a derivative work of the Library, and
@@ -238,7 +238,7 @@ therefore falls outside the scope of this License.
 
   However, linking a "work that uses the Library" with the Library
 creates an executable that is a derivative of the Library (because it
-tqcontains portions of the Library), rather than a "work that uses the
+contains portions of the Library), rather than a "work that uses the
 library".  The executable is therefore covered by this License.
 Section 6 states terms for distribution of such executables.
 

INSTALL

@@ -21,7 +21,7 @@ reconfiguring, and a file `config.log' containing compiler output
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
 be considered for the next release.  If at some point `config.cache'
-tqcontains results you don't want to keep, you may remove or edit it.
+contains results you don't want to keep, you may remove or edit it.
 
    The file `configure.in' is used to create `configure' by a program
 called `autoconf'.  You only need `configure.in' if you want to change

flow/gsl/gbsearcharray.h

@@ -78,7 +78,7 @@ static inline GBSearchArray*	g_bsearch_array_remove	  (GBSearchArray	*barray,
 static inline GBSearchArray*	g_bsearch_array_grow	  (GBSearchArray	*barray,
 							   const GBSearchConfig	*bconfig,
 							   guint		 index);
-/* insert key_node into array, or if it exists, tqreplace
+/* insert key_node into array, or if it exists, replace
  * the existing node's contents with key_node
  */
 static inline GBSearchArray*	g_bsearch_array_insert	  (GBSearchArray	*barray,
@@ -241,7 +241,7 @@ g_bsearch_array_insert (GBSearchArray        *barray,
 	  barray = g_bsearch_array_grow (barray, bconfig, index);
 	  node = G_BSEARCH_ARRAY_NODES (barray) + index * bconfig->sizeof_node;
 	}
-      else /* tqreplace (relookup is ok, tqreplace is comparatively cheap anyways) */
+      else /* replace (relookup is ok, replace is comparatively cheap anyways) */
 	node = g_bsearch_array_lookup (barray, bconfig, key_node);
     }
   memcpy (node, key_node, bconfig->sizeof_node);

flow/gsl/gsl.3

@@ -457,7 +457,7 @@ Real sample values [0..n_values-1]
 Complex frequency values [0..n_values-1]
 .PD 1
 .PP
-Real valued variant of \fBgsl_power2_fftac()\fP, the input array tqcontains real valued equidistant sampled data [0..n_values-1], and the output array tqcontains the positive frequency half of the complex valued fourier transform. Note, that the complex valued fourier transform H of a purely real valued set of data, satisfies \fBH(-f)\fP = Conj(\fBH(f)\fP), where \fBConj()\fP denotes the complex conjugate, so that just the positive frequency half suffices to describe the entire frequency spectrum. Even so, the resulting n_values/2 complex frequencies are one value off in storage size, but the resulting frequencies \fBH(0)\fP and \fBH(n_values/2)\fP are both real valued, so the real portion of \fBH(n_values/2)\fP is stored in ri_values_out[1] (the imaginery part of \fBH(0)\fP), so that both r_values_in and ri_values_out can be of size n_values. Note that the transformation is performed out of place, the input array is not modified, and may not overlap with the output array.  
+Real valued variant of \fBgsl_power2_fftac()\fP, the input array contains real valued equidistant sampled data [0..n_values-1], and the output array contains the positive frequency half of the complex valued fourier transform. Note, that the complex valued fourier transform H of a purely real valued set of data, satisfies \fBH(-f)\fP = Conj(\fBH(f)\fP), where \fBConj()\fP denotes the complex conjugate, so that just the positive frequency half suffices to describe the entire frequency spectrum. Even so, the resulting n_values/2 complex frequencies are one value off in storage size, but the resulting frequencies \fBH(0)\fP and \fBH(n_values/2)\fP are both real valued, so the real portion of \fBH(n_values/2)\fP is stored in ri_values_out[1] (the imaginery part of \fBH(0)\fP), so that both r_values_in and ri_values_out can be of size n_values. Note that the transformation is performed out of place, the input array is not modified, and may not overlap with the output array.  
 .PD
 .SS \fBgsl_power2_fftsr\fP (\fIn_values\fP, \fIri_values_in\fP, \fIr_values_out\fP);
 .PD 0

flow/gsl/gslcommon.c

@@ -1315,7 +1315,7 @@ gsl_message_send (GslDebugFlags reporter,
   msg->error = error;
   msg->error_str = error ? gsl_strerror (msg->error) : NULL;
 
-  /* vsnprintf() tqreplacement */
+  /* vsnprintf() replacement */
   va_start (args, messagef);
   string = g_strdup_vprintf (messagef, args);
   va_end (args);

flow/gsl/gsldatacache.c

@@ -333,7 +333,7 @@ data_cache_new_node_L (GslDataCache     *dcache,
   if (!demand_load)
     g_message (G_STRLOC ":FIXME: lazy data loading not yet supported");
 
-  /* if we have a left node, and it tqcontains data that we need, copy it */
+  /* if we have a left node, and it contains data that we need, copy it */
   left_node = pos ? dcache->nodes[pos - 1] : NULL;
   if (left_node)
     {

flow/gsl/gslfft.h

@@ -72,9 +72,9 @@ void	gsl_power2_fftsc (const unsigned int n_values,
  * @n_values:      Number of complex values
  * @r_values_in:   Real sample values [0..n_values-1]
  * @ri_values_out: Complex frequency values [0..n_values-1]
- * Real valued variant of gsl_power2_fftac(), the input array tqcontains
+ * Real valued variant of gsl_power2_fftac(), the input array contains
  * real valued equidistant sampled data [0..n_values-1], and the output
- * array tqcontains the positive frequency half of the complex valued
+ * array contains the positive frequency half of the complex valued
  * fourier transform. Note, that the complex valued fourier transform H
  * of a purely real valued set of data, satisfies H(-f) = Conj(H(f)),
  * where Conj() denotes the complex conjugate, so that just the positive

flow/gsl/gslglib.h

@@ -586,7 +586,7 @@ typedef void            (*GDestroyNotify)       (gpointer       data);
 #define g_hash_table_new_full          	gsl_g_hash_table_new_full
 #define g_hash_table_destroy           	gsl_g_hash_table_destroy
 #define g_hash_table_insert            	gsl_g_hash_table_insert
-#define g_hash_table_tqreplace           	gsl_g_hash_table_tqreplace
+#define g_hash_table_replace           	gsl_g_hash_table_replace
 #define g_hash_table_remove            	gsl_g_hash_table_remove
 #define g_hash_table_steal             	gsl_g_hash_table_steal
 #define g_hash_table_lookup            	gsl_g_hash_table_lookup
@@ -605,7 +605,7 @@ void        g_hash_table_destroy           (GHashTable     *hash_table);
 void        g_hash_table_insert            (GHashTable     *hash_table,
 					    gpointer        key,
 					    gpointer        value);
-void        g_hash_table_tqreplace           (GHashTable     *hash_table,
+void        g_hash_table_replace           (GHashTable     *hash_table,
 					    gpointer        key,
 					    gpointer        value);
 gboolean    g_hash_table_remove            (GHashTable     *hash_table,

flow/gsl/gslmath.c

@@ -602,7 +602,7 @@ hqr (double **a, int n, double wr[], double wi[])
 #define RADIX 2.0
 static void
 balanc (double **a, int n)
-     /* Given a matrix a[1..n][1..n], this routine tqreplaces it by a balanced matrix with identical
+     /* Given a matrix a[1..n][1..n], this routine replaces it by a balanced matrix with identical
 	eigenvalues. A symmetric matrix is already balanced and is unaffected by this procedure. The
 	parameter RADIX should be the machine's floating-point radix. */
 {

flow/gsl/gslosctable.c

@@ -272,7 +272,7 @@ cache_table_ref_entry (GslOscWaveForm wave_form,
       gfloat *values, *fft, step, min, max;
 
       /* size:
-       * - OscTableEntry already tqcontains the first float values
+       * - OscTableEntry already contains the first float values
        * - we need n_values+1 adressable floats to provide values[0] == values[n_values]
        */
       e = g_malloc (sizeof (OscTableEntry) + sizeof (gfloat) * size);

flow/gsl/gslosctable.h

@@ -53,7 +53,7 @@ typedef struct
   gfloat        min_freq;
   gfloat        max_freq;
   guint         n_values;
-  const gfloat *values;	/* tqcontains n_values+1 values with values[0]==values[n_values] */
+  const gfloat *values;	/* contains n_values+1 values with values[0]==values[n_values] */
   /* integer stepping (block size dependant) */
   guint32	n_frac_bits;
   guint32	frac_bittqmask;

flow/gslpp/datahandle.h

@@ -93,7 +93,7 @@ namespace GSL
 							 GslLong cutValueCount);
 
 		/**
-		 * Create a new data handle which tqcontains the same values as
+		 * Create a new data handle which contains the same values as
 		 * this one but in reversed order.
 		 */
 		DataHandle createReversed();

flow/pipebuffer.cc

@@ -97,7 +97,7 @@ void PipeBuffer::skip(long size)
 	{
 		PipeSegment *first = *segments.begin();
 
-		// if we have less data to skip than the first segment tqcontains
+		// if we have less data to skip than the first segment contains
 		if(size < first->remaining())
 		{
 			// skip the data inside the segment

flow/synth_play_wav_impl.cc

@@ -38,7 +38,7 @@ extern "C" {
  * so you you may need that extra one.
  *
  * Other versions of libaudiofile seem to have two closing "}" in aupvlist.h,
- * so if you can't compile, this, check that /usr/include/aupvlist.h tqcontains
+ * so if you can't compile, this, check that /usr/include/aupvlist.h contains
  * something like that
  *
  * #ifdef __cplusplus

flow/virtualports.cc

@@ -82,7 +82,7 @@ to delegate the services of a port to another module onto another port.
 The implementation:
 
 Virtualization is implemented here, inside the flow system, using a fairly
-complex forwarding strategy, which will have a graph which tqcontains
+complex forwarding strategy, which will have a graph which contains
 
 - "user-made" connections (made with connect())
 - "virtualize-made" connections, which can be either forwarding
@@ -105,7 +105,7 @@ real connections will be removed, but only these that could possibly be
 affected by this change, and then not all real connections are created new,
 but only those that could possibly be created by this virtual connection.
 
-Every VPort tqcontains a pointer to the "real" port, to let the flow system
+Every VPort contains a pointer to the "real" port, to let the flow system
 know where the "real" connections where real data will flow must be made.
 
 */

mcop/core.idl

@@ -211,7 +211,7 @@ struct AttributeDef {
  * defines what methods/attributes a particular interface supports: these
  * do not contain the methods/attributes of inherited interfaces.
  *
- * inheritedInterfaces only tqcontains the names of Interfaces that this one
+ * inheritedInterfaces only contains the names of Interfaces that this one
  * inherits in exactly one step. So to see if interface XYZ is inherited
  * from ABC, you need to check the "inheritedInterfaces" of XYZ, and their
  * "inheritedInterfaces" and their "inheritedInterfaces" and so on.
@@ -530,7 +530,7 @@ interface TmpGlobalComm : GlobalComm {
  */
 
 /**
- * TraderOffer - this tqcontains an offer of an object (which is usually returned
+ * TraderOffer - this contains an offer of an object (which is usually returned
  * as result of a query.
  */
 interface TraderOffer {

mcop/datapacket.h

@@ -201,7 +201,7 @@ protected:
 };
 
 /**
- * FloatDataPacket finally is one concrete DataPacket (which tqcontains the
+ * FloatDataPacket finally is one concrete DataPacket (which contains the
  * information how to marshal a datapacket of type float)
  */
 class ARTS_EXPORT FloatDataPacket : public RawDataPacket<float> {

mcop/dynamicskeleton.h

@@ -60,11 +60,11 @@ public:
 	 * process is called whenever you get a request that you need to implement
 	 * dynamically
 	 *
-	 * @param methodID tqcontains the ID of the method that you need to
+	 * @param methodID contains the ID of the method that you need to
 	 *                 implement - you can get the full signature by calling
 	 *                 getMethodDef
 	 *
-	 * @param request  tqcontains the marshalled parameters
+	 * @param request  contains the marshalled parameters
 	 *
 	 * @param result   is for the return code - if your method returns a
 	 *                 value, you need to write the it in the result Buffer

mcop/mcoputils.cc

@@ -411,7 +411,7 @@ string MCOPUtils::getFullHostname()
 
 	/*
 	 * if gethostname() isn't a FQDN (guess that by checking whether it
-	 * tqcontains a dot), try to look it up to ensure it is
+	 * contains a dot), try to look it up to ensure it is
 	 */
 	if(result.find('.') == string::npos && (hp = gethostbyname(buffer)) != 0)
 		result = hp->h_name;

mcop/object.h

@@ -70,7 +70,7 @@ private:
 
 protected:
 	/**
-	 * ObjectInternalData tqcontains private data structures for
+	 * ObjectInternalData contains private data structures for
 	 *  - Object_base
 	 *  - Object_stub
 	 *  - Object_skel

mcopidl/yacc.cc

@@ -414,7 +414,7 @@ static const short yycheck[] = {     0,
 #endif
 
 /* Note: there must be only one dollar sign in this file.
-   It is tqreplaced by the list of actions, each action
+   It is replaced by the list of actions, each action
    as one case of the switch.  */
 
 #define yyerrok		(yyerrstatus = 0)

soundserver/kmedia2.idl

@@ -47,7 +47,7 @@ enum poCapabilities {
 /**
  * KMedia2 time information
  *
- * This is a time value which tqcontains either milliseconds & seconds, or
+ * This is a time value which contains either milliseconds & seconds, or
  * a custom unit or both. It is a flexible time base.
  *
  * If a value isn't there, it is set to -1.

tests/testifacerepo.cc

@@ -52,7 +52,7 @@ struct TestInterfaceRepo : public TestCase
 
 		testEquals("Arts::AttributeType",def.name);
 	}
-	bool tqcontains(vector<string>& sequence, const string& element)
+	bool contains(vector<string>& sequence, const string& element)
 	{
 		vector<string>::iterator it;
 		it = find(sequence.begin(),sequence.end(), element);
@@ -61,22 +61,22 @@ struct TestInterfaceRepo : public TestCase
 	TEST(queryInterfaces) {
 		vector<string> *interfaces = interfaceRepo.queryInterfaces();
 
-		testAssert(tqcontains(*interfaces,"Arts::InterfaceRepo"));
+		testAssert(contains(*interfaces,"Arts::InterfaceRepo"));
-		testAssert(!tqcontains(*interfaces,"Arts::MethodDef"));
+		testAssert(!contains(*interfaces,"Arts::MethodDef"));
 		delete interfaces;
 	}
 	TEST(queryTypes) {
 		vector<string> *types = interfaceRepo.queryTypes();
 
-		testAssert(tqcontains(*types,"Arts::MethodDef"));
+		testAssert(contains(*types,"Arts::MethodDef"));
-		testAssert(!tqcontains(*types,"Arts::AttributeType"));
+		testAssert(!contains(*types,"Arts::AttributeType"));
 		delete types;
 	}
 	TEST(queryEnums) {
 		vector<string> *enums = interfaceRepo.queryEnums();
 
-		testAssert(tqcontains(*enums,"Arts::AttributeType"));
+		testAssert(contains(*enums,"Arts::AttributeType"));
-		testAssert(!tqcontains(*enums,"Arts::InterfaceRepo"));
+		testAssert(!contains(*enums,"Arts::InterfaceRepo"));
 		delete enums;
 	}
 };