03 October 2024 - fix issues and development builds

issue 35 - removed INCDIR path from tqt3.SlackBuild mkspecs patch - no longer required to differentiate development builds
 issue 36 - PATHs set from tde.sh/tqt3.sh conditionally on TDE being the chosen DE
          - added tqt.conf for tqt libs paths
 issue 37 - added command line option for sudo plugins for tdelibs and tdebase builds - defaults to su
 BUILD-TDE.sh - replaced KDE_HAVE_GCC_VISIBILITY with DE_HAVE_GCC_VISIBILITY to allow for development renaming
 development builds -
   - added tde-ebook-reader
   - soundkonverter locale files location
   - GCC visibility test adjusted for change to TDE_HAVE_GCC_VISIBILITY
   - tdebase change for man page source directories
   - tdelibs added webp support
   - revised FEAT option
   - tdegraphics - more kmrml patching
 some misc build revisions - clamav-1.4.1, graphviz-12.1.1, imlib2-1.12.3, xmedcon-0.24.0
master
Ray-V 2 months ago
parent 132969d704
commit 4a9e6c63e1

@ -33,7 +33,7 @@ source ../../get-source.sh
## klamav needs clamav as a build time requirement
[[ $(cat $TMPVARS/PRE_DOWNLOAD) != yes ]] && {
# ### clamav - start
clamav_VERS=1.3.1
clamav_VERS=1.4.1
clamav_installed_fn () { pkg-config --atleast-version=$clamav_VERS libclamav ;}
## If it's already installed, go to end
clamav_installed_fn || {
@ -41,6 +41,7 @@ clamav_installed_fn || {
[[ -s $BUILD_TDE_ROOT/src/clamav-$clamav_VERS.tar.gz ]] && {
## .. build, package, and install it
(
echo "
building clamav
"
@ -53,6 +54,13 @@ tar xf $BUILD_TDE_ROOT/src/clamav-$clamav_VERS.tar.gz
cd clamav-$clamav_VERS/
RUSTC_MIN_REQd=$(grep rust-version .cargo/vendor/home/Cargo.toml | grep -o \"1\..*) # eg "1.70.0"
RUSTC_MIN_REQd2=$(echo $RUSTC_MIN_REQd | grep -o "1\..."|sed 's|\.||') # eg 170
#
[[ ! $(rustc --version | grep -o "1\..."|sed 's|\.||') -ge $RUSTC_MIN_REQd2 ]] && { echo -e "\033[39;1m
## rust version $RUSTC_MIN_REQd or greater is required to build clamav-$clamav_VERS ##
\033[0m" ; exit 1 ; }
## set RPATH relative to ORIGIN always
sed -i 's|set(CMAKE_INSTALL_RPATH.*$|set(CMAKE_INSTALL_RPATH "$ORIGIN/../${CMAKE_INSTALL_LIBDIR}")|' CMakeLists.txt

@ -34,7 +34,8 @@ getsource_fn
untar_fn
## for slack-desc
langs="";for Lang in $I18N;do [[ -s po/$Lang.po ]] && langs="$langs $Lang";done
[[ $TDEVERSION != 14.1.2 ]] && PO_DIR=translations/messages
langs="";for Lang in $I18N;do [[ -s ${PO_DIR:-po}/$Lang.po ]] && langs="$langs $Lang";done
listdocs_fn
@ -42,8 +43,6 @@ chown_fn
cd_builddir_fn
sed -i 's|FILES soundkonverterui.rc$|& userscript.sh|' ../src/CMakeLists.txt
cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-}
make_fn

@ -0,0 +1,8 @@
The SlackBuild has some options to change build-time defaults, all of which can be changed from the toolbar in the running program, but which are included for an alternative initial presentation.
1] font family and size
2] line spacing
3] auto hyphenation
All can be commented out in the SlackBuild if not wanted.

@ -0,0 +1,93 @@
#!/bin/sh
# Generated by Alien's SlackBuild Toolkit: http://slackware.com/~alien/AST
# Copyright 2009, 2010, 2011, 2012, 2013, 2014, 2015 Eric Hameleers, Eindhoven, Netherlands
# Copyright 2015-2017 Thorn Inurcide
# Copyright 2015-2017 tde-slackbuilds project on GitHub
# All rights reserved.
#
# Permission to use, copy, modify, and distribute this software for
# any purpose with or without fee is hereby granted, provided that
# the above copyright notice and this permission notice appear in all
# copies.
#
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
PRGNAM=tde-ebook-reader
VERSION=$TDEVERSION
BUILD=${BUILD:-1}
TAG=${TAG:-_tde}
source ../../get-source.sh
getsource_fn
untar_fn
## default font
sed -i 's|Georgia|Liberation Sans|;s|16|13|' reader/data/default/config.xml
## default line spacing
sed -i 's|1.4|1.2|;s|140|120|' reader/src/options/FBTextStyle.cpp
## no auto hyphenation
sed -i 's|AutoHyphenation", true|AutoHyphenation", false|' zlibrary/text/src/style/ZLTextStyleCollection.cpp
## work-around for desktop files translations pending translations/desktop_files being set up
for locn in ar es hu pl ru zh_CN
do
[[ $I18N != *$locn* ]] && sed -i "/\[$locn\]/d" reader/desktop/tde-ebook-reader.desktop
done
## for slack-desc -> although no translations yet
langs="en";for Lang in $I18N;do [[ -s translations/messages/$Lang.po ]] && langs="$langs $Lang";done
listdocs_fn
chown_fn
cd_builddir_fn
cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-}
make_fn
installdocs_fn
mangzip_fn
strip_fn
mkdir_install_fn
doinst_sh_fn
echo "
# HOW TO EDIT THIS FILE:
# The 'handy ruler' below makes it easier to edit a package description. Line
# up the first '|' above the ':' following the base package name, and the '|'
# on the right side marks the last column you can put a character in. You must
# make exactly 11 lines for the formatting to be correct. It's also
# customary to leave one space after the ':'.
|-----handy-ruler------------------------------------------------------|
$PRGNAM: TDE Ebook Reader is a TQt port of FBReader,
$PRGNAM: supporting several e-book formats: ePub, fb2, chm, rtf, plucker, etc.
$PRGNAM:
$PRGNAM: Direct reading from zip, tar, gzip and bzip2 archives is supported.
$PRGNAM:
$PRGNAM: With language support for:
$PRGNAM: $langs
$PRGNAM:
$PRGNAM:
$PRGNAM:
$PRGNAM:
" > $PKG/install/slack-desc
makepkg_fn

@ -312,6 +312,15 @@ If following the build method on the previous screen, the answer here should pro
[[ $? == 1 ]] && echo no > $TMPVARS/KEEP_BUILD
## new app for 14.1.3+ & 14.2.0
# Use non-breaking space - U00a0 - in strings for this to work with 'dialog'
[[ $(cat $TMPVARS/TDEVERSION) != 14.1.2 ]] && {
app_1="Apps/tde-ebook-reader"
about_1="Ebook reader .."
status_1=off
comment_1="\Zb\Z6 \Zn"
}
rm -f $TMPVARS/TDEbuilds
dialog --cr-wrap --nocancel --no-shadow --colors --title " TDE Packages Selection " --item-help --checklist \
"
@ -410,6 +419,7 @@ Non-TDE apps are in the Misc category and don't need the \Zb\Zr\Z4R\Znequired TD
"Apps/potracegui" "A GUI for potrace" off "\Zb\Z6 Requires potrace \Zn" \
"Apps/rosegarden" "Audio sequencer and musical notation editor" off "\Zb\Z6 Requires jack-audio-connection-kit liblo and dssi for proper functionality \Zn" \
"Apps/soundkonverter" "Frontend to various audio converters" off "\Zb\Z6 \Zn" \
${app_1:-} ${about_1:-} ${status_1:-} ${comment_1:-} \
"Apps/tde-style-lipstik" "Lipstik theme" off "\Zb\Z6 \Zn" \
"Apps/tde-style-qtcurve" "QtCurve theme" off "\Zb\Z6 \Zn" \
"Apps/tdebluez" "Bluetooth Bluez5 functionality" off "\Zb\Z6 \Zn" \
@ -516,7 +526,7 @@ ${DLG_BOX:-0 0}
## GCC visibility option
## If tdelibs has been built, the header will exist:
[[ $(grep "KDE_HAVE_GCC_VISIBILITY 1" $(cat $TMPVARS/INSTALL_TDE)/include/kdemacros.h) ]] && \
[[ $(grep "DE_HAVE_GCC_VISIBILITY 1" $(cat $TMPVARS/INSTALL_TDE)/include/?demacros.h) ]] && \
GCC_VIS_M=ON || GCC_VIS_M=OFF
#
## only run this if any of listed Deps or tdelibs has been selected
@ -922,7 +932,7 @@ INST_PACKAGE=yes && [[ $INST == 0 ]] && INST_PACKAGE=no
## If GCC_VIS has been set on the command line, use that value
[[ $GCC_VIS ]] && export GCC_VIS || {
## Otherwise, if tdelibs has been built before, the header will exist, so test that, and set GCC_VIS accordingly:
[[ $(grep "KDE_HAVE_GCC_VISIBILITY 1" $INSTALL_TDE/include/kdemacros.h) ]] && \
[[ $(grep "DE_HAVE_GCC_VISIBILITY 1" $INSTALL_TDE/include/?demacros.h) ]] && \
GCC_VIS=ON || GCC_VIS=OFF
## But, if tdelibs or any listed Deps package is being built, or re-built, override any set value with the dialog output:
[[ -s $TMPVARS/GCC_VIS ]] && GCC_VIS=$(cat $TMPVARS/GCC_VIS)

@ -132,6 +132,15 @@ sed -i 's|HINTS|&\n /var/www/cgi-bin|' khelpcenter/searchhandlers/CMakeList
[[ $TDEVERSION == 14.1.2 ]] && {
sed -i 's|MATCHES ";${_lang};" ))|MATCHES ";1;" ))|' cmake/modules/TDEMacros.cmake
}
## + a related change to man source directories for development versions
[[ $TDEVERSION != 14.1.2 ]] && {
MAN_SRC_DIR=*/
}
## correct test for sudo
sed -i 's|^if( TDESU_BACKEND-NOTFOUND )|if( ${TDESU_BACKEND} STREQUAL "TDESU_BACKEND-NOTFOUND" )|' tdesu/CMakeLists.txt
sed -i 's|endif( TDESU_BACKEND-NOTFOUND )|endif()|' tdesu/CMakeLists.txt
sed -i 's|"sudo su"|sudo|' konsole/other/CMakeLists.txt
listdocs_fn
@ -139,12 +148,12 @@ chown_fn
cd_builddir_fn
sed -i "s|/etc/trinity|$INSTALL_TDE/share/config|" ../doc/man/{gentdmconf,tdm}.1
sed -i "s|/etc/trinity|$INSTALL_TDE/share/config|" ../doc/man/${MAN_SRC_DIR:-}{gentdmconf,tdm}.1
[[ $TDE_CNF_DIR == *tde* ]] && \
sed -i 's|trinity,kde,kde2,kde1|tde|' ../doc/man/*.1 && \
sed -i 's|trinity|tde|g' ../doc/man/*.1 || \
sed -i 's|trinity,kde,kde2,kde1|trinity|' ../doc/man/*.1
sed -i "s|http://bugs.*desktop.org|https://mirror.git.trinitydesktop.org/gitea/TDE/$PRGNAM/issues|" ../doc/man/*.1
sed -i 's|trinity,kde,kde2,kde1|tde|' ../doc/man/${MAN_SRC_DIR:-}*.1 && \
sed -i 's|trinity|tde|g' ../doc/man/${MAN_SRC_DIR:-}*.1 || \
sed -i 's|trinity,kde,kde2,kde1|trinity|' ../doc/man/${MAN_SRC_DIR:-}*.1
sed -i "s|http://bugs.*desktop.org|https://mirror.git.trinitydesktop.org/gitea/TDE/$PRGNAM/issues|" ../doc/man/${MAN_SRC_DIR:-}*.1
## kfrontend/CMakeLists.txt runs gentdmconf to set up the tdm configuration files
## - after that, add the TDM configuration README
@ -158,7 +167,7 @@ install(
endif( )
' >> ../tdm/kfrontend/CMakeLists.txt
#
sed -i "s|/opt/.*/share/doc/tdm/README.gz|$INSTALL_TDE/share/config/tdm/README-config|" ../doc/man/tdm{,ctl}.1
sed -i "s|/opt/.*/share/doc/tdm/README.gz|$INSTALL_TDE/share/config/tdm/README-config|" ../doc/man/${MAN_SRC_DIR:-}tdm{,ctl}.1
cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-} \
-DWITH_ARTS="ON" \
@ -177,8 +186,8 @@ cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-} \
-DWITH_SASL="OFF" \
-DWITH_SENSORS="ON" \
-DWITH_SHADOW="ON" \
-DWITH_SUDO_KONSOLE_SUPER_USER_COMMAND="ON" \
-DWITH_SUDO_TDESU_BACKEND="ON" \
-DWITH_SUDO_KONSOLE_SUPER_USER_COMMAND=${W_SUDO:-"OFF"} \
-DWITH_SUDO_TDESU_BACKEND=${W_SUDO:-"OFF"} \
-DWITH_TDEHWLIB="ON" \
-DWITH_UPOWER="ON" \
-DWITH_XCOMPOSITE="ON" \
@ -296,27 +305,56 @@ ln -sf xinitrc.tde xinitrc)
mkdir -p $PKG/etc/profile.d
echo '#!'"/bin/sh
# Only add TDE PATHs if TDE is the chosen DE
[[ \$(readlink -e /etc/X11/xinit/xinitrc) == *xinitrc.tde ]] && {
# TDE additions:
export TDEDIR=$INSTALL_TDE
# upgradepkg runs installpkg twice, so test for the second run:
[[ \"\$XDG_CONFIG_DIRS\" != *$INSTALL_TDE/etc/xdg* ]] && {
if [ ! \"\$XDG_CONFIG_DIRS\" = \"\" ]; then
export XDG_CONFIG_DIRS=\$XDG_CONFIG_DIRS:$INSTALL_TDE/etc/xdg
else
export XDG_CONFIG_DIRS=/etc/xdg:$INSTALL_TDE/etc/xdg
fi
[[ \$XDG_CONFIG_DIRS != *$INSTALL_TDE/etc/xdg* ]] && {
export XDG_CONFIG_DIRS=\${XDG_CONFIG_DIRS:-/etc/xdg}:$INSTALL_TDE/etc/xdg
}
## Re: https://specifications.freedesktop.org/basedir-spec/basedir-spec-0.6.html
## If XDG_DATA_DIRS is null or unset, the default is /usr/local/share:/usr/share
[[ \$XDG_DATA_DIRS == \"\" ]] && \\
export XDG_DATA_DIRS=/usr/local/share:/usr/share:$INSTALL_TDE/share || {
[[ \$XDG_DATA_DIRS != *$INSTALL_TDE/share* ]] && \\
export XDG_DATA_DIRS=\$XDG_DATA_DIRS:$INSTALL_TDE/share
[[ \$XDG_DATA_DIRS != *$INSTALL_TDE/share* ]] && {
export XDG_DATA_DIRS=\${XDG_DATA_DIRS:-/usr/local/share:/usr/share}:$INSTALL_TDE/share
}
" > $PKG/etc/profile.d/tde.sh
echo '
# update PATH
# upgradepkg runs installpkg twice, so even though '"$TQTDIR"'/bin might be
# a new PATH, it needs to be tested for the second run to avoid duplication
[[ $PATH != *'"$TQTDIR"'/bin* ]] && PATH='"$TQTDIR"'/bin:$PATH
' >> $PKG/etc/profile.d/tde.sh
[[ $INSTALL_TDE != $TQTDIR ]] && {
echo '
[[ $PATH != *'"$INSTALL_TDE"'/bin* ]] && PATH='"$INSTALL_TDE"'/bin:$PATH
' >> $PKG/etc/profile.d/tde.sh
}
echo '
# update MANPATH
[[ $MANPATH != */opt/tde/man* ]] && {
export MANPATH=$MANPATH:'"$INSTALL_TDE"'/man
}
' >> $PKG/etc/profile.d/tde.sh
## set TDEHOME and TDEROOTHOME variables - defaults ~/.trinity and /root/.trinity
[[ $TDE_CNF_DIR == *tde* ]] && {
echo '
export TDEHOME=~/.tde
export TDEROOTHOME=/root/.tde
' >> $PKG/etc/profile.d/tde.sh
}
echo '}
' >> $PKG/etc/profile.d/tde.sh
echo '#!'"/bin/csh
# TDE additions:
if ( ! \$?TDEDIR ) then
@ -479,24 +517,6 @@ config() {
config .'"$INSTALL_TDE"'/share/config/tdm/tdmrc.new
config .'"$INSTALL_TDE"'/share/config/tdm/backgroundrc.new
# update PATH
# upgradepkg runs installpkg twice, so even though '"$TQTDIR"'/bin might be
# a new PATH, it needs to be tested for the second run
if ! grep '"$TQTDIR"'/bin /etc/profile
then
echo "PATH='"$TQTDIR"'/bin:\$PATH" >> /etc/profile
fi
if ! grep '"$INSTALL_TDE"'/bin /etc/profile
then
echo "PATH='"$INSTALL_TDE"'/bin:\$PATH" >> /etc/profile
fi
# update MANPATH
if ! grep '"$INSTALL_TDE"'/man /etc/profile
then
echo "export MANPATH=\$MANPATH:'"$INSTALL_TDE"'/man" >> /etc/profile
fi
## you may not want to do this ##
# start a '\''konsole'\'' with system-wide profile
[[ ! $(grep -x "source /etc/profile" $HOME/.bashrc ) ]] && echo "source /etc/profile" >> $HOME/.bashrc || true
@ -504,15 +524,6 @@ fi
sed -i '\''s|source /etc/profile.d/mc.sh|#source /etc/profile.d/mc.sh|'\'' $HOME/.bashrc || true
' > $PKG/install/doinst.sh
## set TDEHOME and TDEROOTHOME variables - defaults ~/.trinity and /root/.trinity
[[ $TDE_CNF_DIR == *tde* ]] && {
echo "# upgradepkg runs installpkg twice, so firstly remove any previous TDE*HOME entries
sed -i '/TDE.*HOME/d' /etc/profile
echo 'export TDEHOME=~/.tde' >> /etc/profile
echo 'export TDEROOTHOME=/root/.tde' >> /etc/profile
" >> $PKG/install/doinst.sh
}
## Set up doinst.sh according to the TDM options selected
[[ $(cat $TMPVARS/RUNLEVEL) == *rc4l* ]] && {
echo '## login manager TDM selected
@ -526,7 +537,6 @@ sed -i 's|id:[1-5]|id:4|' etc/inittab
" >> $PKG/install/doinst.sh
}
doinst_sh_fn
##############################################################################

@ -110,6 +110,10 @@ sed -i 's|tqt_TQOBJECT|TQT_TQOBJECT_H|' kmrml/kmrml/kcontrol/mainpage.cpp
sed -i 's|TQT_|TQ_|g' kmrml/kmrml/*.cpp
sed -i 's|TQT_|TQ_|' kmrml/kmrml/server/*.cpp
#
[[ $TDEVERSION == 14.1.x ]] && {
sed -i 's|KDE_EXPORT|TDE_EXPORT|' kmrml/kmrml/*.cpp
sed -i 's|KDE_EXPORT|TDE_EXPORT|' kmrml/kmrml/server/*.cpp
}
## display deprecation message
sed -i 's|AUTHOR_WARNING|WARNING|' kmrml/CMakeLists.txt
}

@ -136,6 +136,10 @@ patch -N -p0 << EOF || true
+ <itemData name="difflineadd" defStyleNum="dsNormal" backgroundColor="#eeeeee" color="#0000FF" />
EOF
## correct test for sudo
sed -i 's|^if( TDESU_BACKEND-NOTFOUND )|if( ${TDESU_BACKEND} STREQUAL "TDESU_BACKEND-NOTFOUND" )|' CMakeLists.txt
sed -i 's|endif( TDESU_BACKEND-NOTFOUND )|endif()|' CMakeLists.txt
listdocs_fn
chown_fn
@ -155,6 +159,7 @@ pkg-config jasper && JASPER="ON"
## just show message without failing if no spell checker is installed
sed -i 's|tde_message_fatal( "Spell checker|message( "Spell checker|' ../CMakeLists.txt
[[ $TDEVERSION != 14.1.2 ]] && pkg-config libwebp && W_WEBP=-DWITH_WEBP=ON
cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-} \
-DDEFAULT_SPELL_CHECKER=${DEF_SP_CHKR:-"ASPELL"} \
-DTDE_MALLOC="OFF" \
@ -190,7 +195,7 @@ cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-} \
-DWITH_PCSC="OFF" \
-DWITH_PKCS="OFF" \
-DWITH_SSL="ON" \
-DWITH_SUDO_TDESU_BACKEND="ON" \
-DWITH_SUDO_TDESU_BACKEND=${W_SUDO:-"OFF"} \
-DWITH_TDEHWLIB="ON" \
-DWITH_TDEHWLIB_DAEMONS="ON" \
-DWITH_TDEICONLOADER_DEBUG="OFF" \
@ -200,6 +205,7 @@ cmake ${G_NINJA:-} -C $TMPVARS/CMAKE_CACHE ${CMAKE_OPTS:-} \
-DWITH_UDISKS="ON" \
-DWITH_UPOWER="OFF" \
-DWITH_UTEMPTER="OFF" \
${W_WEBP:-} \
-DWITH_XCOMPOSITE="ON" \
-DWITH_XRANDR="ON"

@ -54,9 +54,6 @@ echo $'--- mkspecs/linux-g++/qmake.conf
@@ -29 +29 @@
-QMAKE_CXX = g++
+QMAKE_CXX = $(COMPILER_CXX)
@@ -40 +40 @@
-QMAKE_INCDIR =
+QMAKE_INCDIR = $(TQTDIR)/include/tqt
@@ -42,2 +42,2 @@
-QMAKE_INCDIR_X11 = /usr/X11R6/include
-QMAKE_LIBDIR_X11 = /usr/X11R6/lib
@ -66,7 +63,7 @@ echo $'--- mkspecs/linux-g++/qmake.conf
-QMAKE_LIBDIR_TQT = $(TQTDIR)/lib
-QMAKE_INCDIR_OPENGL = /usr/X11R6/include
-QMAKE_LIBDIR_OPENGL = /usr/X11R6/lib
+QMAKE_LIBDIR_TQT = $(TQTDIR)/lib'"$LIBDIRSUFFIX"$'
+QMAKE_LIBDIR_TQT = $(TQTDIR)/lib'"$LIBDIRSUFFIX"$'
+QMAKE_INCDIR_OPENGL = /usr/include/GL
+QMAKE_LIBDIR_OPENGL = /usr/lib'"$LIBDIRSUFFIX"$'
@@ -49,2 +49,2 @@
@ -164,7 +161,7 @@ echo "yes" | \
#| cc1plus: error: one or more PCH files were found, but they were invalid
#| <command-line>: fatal error: tqtdesignercore: No such file or directory
## Not a fatal error causing a build failure - qmake_image_collection.o compiles later
## at its correct position in the Makefile OBJECTS list - but it's misleading
## at its correct position in the Makefile OBJECTS list - but the error message is misleading
sed -i 's|./qmake_image_collection.o:.*$|& tqtdesignercore.gch/c++|' tools/designer/designer/Makefile
## don't build tutorial and examples which won't be installed because the release version is being built
@ -185,57 +182,72 @@ rm bin/tqm2ts
installdocs_fn
## Ref issue #37
## Set up tqt3.sh to add TDE PATHs only if xinitrc -> xinitrc.tde
mkdir -p $PKG/etc/profile.d
#
echo '#!'"/bin/sh
# Only add TDE PATHs if TDE is set as the chosen DE
[[ \$(readlink -e /etc/X11/xinit/xinitrc) == *xinitrc.tde ]] && {
# Environment path variable for the tQt package.
export TQTDIR=$TQTDIR
" > $PKG/etc/profile.d/tqt3.sh
echo "echo '# Add TDE library directory:
$INSTALL_TDE/lib$LIBDIRSUFFIX
' > /etc/ld.so.conf.d/tqt3.conf
" >> $PKG/etc/profile.d/tqt3.sh
[[ $TQTDIR != $INSTALL_TDE ]] && {
echo "echo '# Add TQT library directory:
$TQTDIR/lib$LIBDIRSUFFIX
' >> /etc/ld.so.conf.d/tqt3.conf
" >> $PKG/etc/profile.d/tqt3.sh
}
[[ $(cat $TMPVARS/PKG_CONFIG_PATH_MOD) != set ]] && PC_HASH="#"
echo "
# Update PKG_CONFIG_PATH for TDE:
#
## add path for INSTALL_TDE ..
[[ \$PKG_CONFIG_PATH != *$INSTALL_TDE/lib$LIBDIRSUFFIX/pkgconfig* ]] && \\
PKG_CONFIG_PATH=\$PKG_CONFIG_PATH:$INSTALL_TDE/lib$LIBDIRSUFFIX/pkgconfig
## .. and for TQTDIR if different" >> $PKG/etc/profile.d/tqt3.sh
[[ $TQTDIR != $INSTALL_TDE ]] && \
echo "[[ \$PKG_CONFIG_PATH != *$TQTDIR/lib$LIBDIRSUFFIX/pkgconfig* ]] && \\
PKG_CONFIG_PATH=\$PKG_CONFIG_PATH:$TQTDIR/lib$LIBDIRSUFFIX/pkgconfig" >> $PKG/etc/profile.d/tqt3.sh
echo "#
## remove duplicated paths:
${PC_HASH:-}PKG_CONFIG_PATH=\$(echo \$PKG_CONFIG_PATH| tr : \\\\n | awk '!seen[\$0]++' | tr \\\\n :|sed 's|:\$||')
#
export PKG_CONFIG_PATH
} || {
[[ -e /etc/ld.so.conf.d/tqt3.conf ]] && {
echo '# TDE library directory to be added:
' > /etc/ld.so.conf.d/tqt3.conf
}
}" >> $PKG/etc/profile.d/tqt3.sh
## set up a placeholder file to enable removal with removepkg -
## contents will be added from tqt3.sh
mkdir -p $PKG/etc/ld.so.conf.d
echo '# Placeholder - TDE library directory to be added:
' > $PKG/etc/ld.so.conf.d/tqt3.conf
echo '#!'"/bin/csh
# Environment path variable for the tQt package:
setenv TQTDIR $TQTDIR
" > $PKG/etc/profile.d/tqt3.csh
#
chmod 755 $PKG/etc/profile.d/*
strip_fn
mkdir_install_fn
# Add this to the doinst.sh:
cat <<EOINS >> $PKG/install/doinst.sh
# Add TDE library directory:
[[ \$(cat etc/ld.so.conf|head -n1) != $INSTALL_TDE/lib$LIBDIRSUFFIX ]] && \
sed -i "1i $INSTALL_TDE/lib$LIBDIRSUFFIX" etc/ld.so.conf
# Add TQt library directory:
[[ \$(cat etc/ld.so.conf|head -n1) != $TQTDIR/lib$LIBDIRSUFFIX ]] && \
sed -i "1i $TQTDIR/lib$LIBDIRSUFFIX" etc/ld.so.conf
[[ -x /sbin/ldconfig ]] && /sbin/ldconfig
EOINS
[[ $(cat $TMPVARS/PKG_CONFIG_PATH_MOD) != set ]] && PC_HASH="#"
cat <<EOINS >> $PKG/install/doinst.sh
## This could be a rebuild or upgradepkg running installpkg twice,
## so delete any previous routine
sed -i '/Update PKG_CONFIG_PATH for TDE/,+11d' etc/profile.d/pkgconfig.sh
echo '# Update PKG_CONFIG_PATH for TDE:
## remove duplicated paths:
${PC_HASH:-}PKG_CONFIG_PATH=\$(echo \$PKG_CONFIG_PATH| tr : \\\\n | awk '"'!seen[\\\$0]++'"' | tr \\\\n :|sed '"'s|:\$||'"')
#
## add path for INSTALL_TDE ..
[[ ! \$PKG_CONFIG_PATH == *$INSTALL_TDE/lib$LIBDIRSUFFIX/pkgconfig* ]] && \\
PKG_CONFIG_PATH=\$PKG_CONFIG_PATH:$INSTALL_TDE/lib$LIBDIRSUFFIX/pkgconfig
## .. and for TQTDIR if different
[[ ! \$PKG_CONFIG_PATH == *$TQTDIR/lib$LIBDIRSUFFIX/pkgconfig* ]] && \\
PKG_CONFIG_PATH=\$PKG_CONFIG_PATH:$TQTDIR/lib$LIBDIRSUFFIX/pkgconfig
#
export PKG_CONFIG_PATH' >> etc/profile.d/pkgconfig.sh
## csh
# Update PKG_CONFIG_PATH:
[[ ! \$( grep $INSTALL_TDE/lib$LIBDIRSUFFIX/pkgconfig etc/profile.d/pkgconfig.csh ) ]] && \\
@ -244,6 +256,17 @@ sed -i "s|pkgconfig$|pkgconfig:$INSTALL_TDE/lib$LIBDIRSUFFIX/pkgconfig|" etc/pro
sed -i "s|pkgconfig$|pkgconfig:$TQTDIR/lib$LIBDIRSUFFIX/pkgconfig|" etc/profile.d/pkgconfig.csh
EOINS
chmod 755 $PKG/etc/profile.d/*
# Add this to the doinst.sh:
cat <<EOINS >> $PKG/install/doinst.sh
# May need to add ld.so.conf.d to /etc/ld.so.conf for Slackware 14.2 users:
[[ ! \$(grep ld.so.conf.d /etc/ld.so.conf) ]] && \\
sed -i '1 i include /etc/ld.so.conf.d/*.conf' /etc/ld.so.conf
[[ -x /sbin/ldconfig ]] && /sbin/ldconfig
EOINS
doinst_sh_fn
echo "

@ -26,7 +26,7 @@
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
PRGNAM=graphviz
VERSION=10.0.1
VERSION=12.1.1
BUILD=${BUILD:-1}
TAG=${TAG:-}

@ -21,7 +21,7 @@
# SUCH DAMAGE.
PRGNAM=imlib2
VERSION=1.12.2
VERSION=1.12.3
BUILD=${BUILD:-1}
TAG=${TAG:-}

@ -25,7 +25,7 @@
#
#
PRGNAM=xmedcon
VERSION=0.23.0
VERSION=0.24.0
BUILD=${BUILD:-1}
TAG=${TAG:-}

@ -32,11 +32,11 @@ If you're curious about what this might involve, [take a look at a sample build
URLs for this and other locations are @ https://www.trinitydesktop.org/mirrorstatus.php
* BUILD= - sets the package build identifier, overriding the SlackBuild default of 1
* GCC_VIS=0 - override setting gcc visibility if it has been set ON in tdelibs
* FEAT= - test a pre-merge feature for development builds - see get-source.sh
* FEAT= - test a pre-merge feature for development builds - see notes in get-source.sh
* build_regextester=[yp] - build the regex tester from the tqt3 example - see the tqt3 README
* mailmerge=n - build kword without mailmerge - see the koffice README and SlackBuild
* KP_BTN=n - build ksnapshot without the dedicated KolourPaint button - see the tdegraphics README and SlackBuild
* W_SUDO=ON - set backends for using sudo as the super user command [default is su]
---
***The directory structure*** for the SlackBuild scripts is in line with the Trinity release source repositories:
@ -134,6 +134,8 @@ Includes:
[4] The README for a [native build for Raspberry Pi3](./README-Raspberry-Pi3.md) is out-of-date and cross compiling is a better option.
[5] The options for including features into any build are detailed in the *.SlackBuild - under `../configure` or `cmake -D*`. Those chosen in these scripts are a selection which work for my builds, so if your installation requires a different set of options, the *.SlackBuild should be edited for the option[s] required.
---
See https://wiki.trinitydesktop.org/How_to_Build_TDE_Core_Modules for more information

@ -275,22 +275,37 @@ cd $BUILD_TDE_ROOT/src/cgit/$PRGNAM/
echo -e "\n copying $PRGNAM git sources to build area ... \n"
## remove any old .git/worktrees records - only being used here as a build source
rm -rf .git/worktrees/*
## use FEAT as a command line option to checkout any other development branch ..
## Use FEAT as a command line option to checkout any other development branch ..
## .. plus FEATa for admin, FEATc for cmake if required
git worktree add -f $TMP_BUILD/tmp-$PRGNAM/$PRGNAM/ ${FEAT:-$DEV_BRANCH}
cd ../admin
echo -e "\n copying admin git sources to build area ... \n"
rm -rf .git/worktrees/*
git worktree add -f $TMP_BUILD/tmp-$PRGNAM/$PRGNAM/admin/ ${FEATa:-$DEV_BRANCH}
cd ../cmake
echo -e "\n copying cmake git sources to build area ... \n"
rm -rf .git/worktrees/*
git worktree add -f $TMP_BUILD/tmp-$PRGNAM/$PRGNAM/cmake/ ${FEATc:-$DEV_BRANCH}
echo -e "\033[39;1m"
## The FEAT commits are based on master branch, so
## rebase the FEAT master branch commit onto the
## r14.1.x branch where that is being built
[[ ${FEAT:-} ]] && feat=${FEAT:-}
[[ ${FEATa:-} ]] && feat=${FEATa:-} && cm_ad=admin/
[[ ${FEATc:-} ]] && feat=${FEATc:-} && cm_ad=cmake/
[[ ${feat:-} != "" && $DEV_BRANCH == r14.1.x ]] && {
( cd $TMP_BUILD/tmp-$PRGNAM/$PRGNAM/${cm_ad:-}
git rebase --onto r14.1.x master $feat
) || { echo -e "\033[39;1m
rebasing $feat onto the r14.1.x branch failed
- try doing a 14.2.0 build instead
\033[0m" ; exit 1 ; }
}
echo -e "\033[0m"
[[ " arts tdelibs " == *$PRGNAM* ]] && {
cd ../libltdl
echo -e "\n copying libltdl git sources to build area ... \n"

Loading…
Cancel
Save