Add ability to hard reset user device

Fix initial size of serial and terminal windows

clients/tde/src/part/prototerminal/part.cpp

@@ -64,6 +64,9 @@ ProtoTerminalPart::ProtoTerminalPart( TQWidget *parentWidget, const char *widget
 	// Create widgets
 	m_base = new ProtoTerminalBase(widget());
 
+	// Initialize widgets
+	m_base->setMinimumSize(500,350);
+
 	connect(m_base->sendText, SIGNAL(clicked()), this, SLOT(sendTextClicked()));
 	connect(m_base->textInput, SIGNAL(returnPressed()), m_base->sendText, SIGNAL(clicked()));
 

clients/tde/src/part/serialconsole/part.cpp

@@ -64,6 +64,9 @@ SerialConsolePart::SerialConsolePart( TQWidget *parentWidget, const char *widget
 	// Create widgets
 	m_base = new SerialConsoleBase(widget());
 
+	// Initialize widgets
+	m_base->setMinimumSize(500,350);
+
 	connect(m_base->sendText, SIGNAL(clicked()), this, SLOT(sendTextClicked()));
 	connect(m_base->textInput, SIGNAL(returnPressed()), m_base->sendText, SIGNAL(clicked()));
 

fpga/gpmc/xilinx/common/main.v

@@ -58,10 +58,15 @@ module main(
 	output reg sixteen_bit_io_mode,
 
 	input [3:0] sseg_mux,
-	input [7:0] sseg_data);
+	input [7:0] sseg_data,
+
+	output userdevice_reset);
 
 	parameter RAM_ADDR_BITS = 15;
 
+	reg userdevice_reset_reg;
+	assign userdevice_reset = ~userdevice_reset_reg;
+
 	assign host_serial_txd = userlogic_serial_rxd;
 	assign userlogic_serial_txd = host_serial_rxd;
 
@@ -394,6 +399,7 @@ module main(
 			// 0x0b: Number of address bits of DSP RAM (read only)
 			// 0x0c: User device control
 			//       Bit 0: User logic reset
+			//       Bit 1: User device reset
 			// 0x20 - 0x3f: LCD data area
 			// 0x4000 - 0x7fff: Logic analyzer data area (read only)
 			if (gpmc_wen_reg == 1'b0) begin
@@ -420,6 +426,7 @@ module main(
 						end
 						12: begin
 							userlogic_reset = gpmc_data_reg[0];
+							userdevice_reset_reg = gpmc_data_reg[1];
 						end
 						default: begin
 							// Do nothing
@@ -503,6 +510,7 @@ module main(
 						end
 						12: begin
 							gpmc_data_out[0] = userlogic_reset;
+							gpmc_data_out[1] = userdevice_reset_reg;
 							gpmc_data_out[7:1] = 0;
 						end
 						default: begin

fpga/gpmc/xilinx/numato/spartan6/xc6slx9/main.ucf

@@ -42,6 +42,7 @@ NET "userproc_start"  LOC = "K16" | SLEW = FAST | IOSTANDARD = "LVCMOS33";
 NET "userproc_done"  LOC = "L13" | IOSTANDARD = "LVCMOS33";
 NET "userlogic_reset" LOC = "E13" | SLEW = FAST | IOSTANDARD = "LVCMOS33";
 NET "userlogic_clock" LOC = "F13" | IOSTANDARD = "LVCMOS33";
+NET "userdevice_reset" LOC = "D17" | SLEW = FAST | DRIVE = 24 | IOSTANDARD = "LVCMOS33";
 
 NET "userlogic_serial_txd" LOC = "C14" | SLEW = FAST | IOSTANDARD = "LVCMOS33";
 NET "userlogic_serial_rxd" LOC = "D14" | IOSTANDARD = "LVCMOS33";