commit b3fe3eb6c8fa5162f94ef57c260e109089efac10 Author: Mavridis Philippe Date: Fri Jun 25 18:57:35 2021 +0300 Initial commit: imported from https://store.kde.org/p/1100399 Signed-off-by: Mavridis Philippe diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..b788d4a --- /dev/null +++ b/AUTHORS @@ -0,0 +1,4 @@ +Adrian Schroeter +Sandro Giessl +Rik Hemsley (rikkus) +Gerd Fleischer diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..b7b5f53 --- /dev/null +++ b/COPYING @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..aaa6504 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,127 @@ +0.4.1 +-a lot of translations provided by SUSE +-tweaked defaults +-more generic titlebar icon +-add a fade out effect if the caption is longer than the titlebar + +0.4 +-add new titlebar style (Dirk Mueller) +-revert behavior for maximized windows to kde standards (Dirk Mueller) +-add option to select titlebar style + +0.3.5 +-better antialias for inner round edges +-use custom colors for lipstik button colors also +-#define => enum ButtonStatus +-insert 3 spaces in default button layout before close button +-tune translation a bit +-make some methods const +-disable overridden options + +0.3.4 +-dont be smart on config changes - fixes wrong button colors when colors change +-fix icon shadows when toolwindows are exactly 4px smaller than normal +-fix drawing with sharp edges +-simplify cache for lipstik button pixmaps +-updated admin/ to svn from branches/KDE/3.5 (3.5.1) +-draw bottom spacer also when maximized + shaded + moving is not allowed +-ported to kcommondecoration (KDE 3.5) + +0.3.3 +-make use of the mousewheel (needs KDE 3.5+) + +0.3.2 +-no changes to rc1 + +0.3.2rc1 +-unified hovering of menubutton (fade to white) +-updated admin/ to KDE 3.5 + +0.3.2beta1 +-turned double to float in shadowengine (minor speedup for captionchanges with shadow?) +-option for red closebutton icon +-options for custom button background, icon colors and shadow +-added some documentation in INSTALL + +0.3.1 +-improved centering of icons for larger button sizes +-make icons a bit smaller relative to button size +-readded debian/ +-spinbox to adjust button icon size +-spinbox to adjust titlebar height + +0.3.1rc1 +-cache button icons (copied/inspired from kdebase/plastik KDE 3.5, Sandro Giessl) +-turn static to "normal" members from handler +-Handler()-function (replaces SUSE2Handler::) +-redesigned configdialog +-updated german translation + +0.3.1beta1 +-tweak to have the buttons icons always centered (from kdebase/plastik KDE 3.5) +-draw buttons icons instead of xpms (sharper, better scalable) (from kdebase/plastik KDE 3.5, Sandro Giessl) +-option to use titlefonts settings (color, shadow) for buttons + +0.3 +-removed debian/ on request by Adrian Neumaier, the potential Debianmaintainer +-added TODO +-updated FSF address + +0.3rc1 (0.2.92) +-2 additional new slightly different buttons + there are now 5 buttons: + -Plastik and Lipstik flat are simple gradients and just differ + in the direction of the gradient + -Lipstik and Plastik 3D should be more 3D and can have their own colors + -Lipstik bright is almost like Lipstik flat with modified top and bottom edges +-updated german translation + +0.3beta1 (0.2.91) +-highlighting/animation for the new buttons +-other "pressed" look to be more like the original Plastik/Lipstikbuttons + +0.3alpha1 (0.2.90) +-slightly improved image selection +-added buttons that should look like Lipstik and Plastik 3D buttons + +0.2.1 +-fixed ebuild script +-updated german translation +-option to select the titlebar icon from the config dialog + (note that this does not check the size of the image or whatever and never will) +-applied small fix from SUSE that fixes imagedistorsion when the caption changes + +0.2 +-renamed to SUSE2 so it can be installed in parallel on SUSE distros +-i18n + +0.1.5 +-fix wrong look of titlebar if maximized + not checked + "allow moving and resizing of maximized windows" +-performance optimization for "mixed corners" mode + (don't paint twice if resizeEvent) + +0.1.4 +-added gentoo ebuild (Thanks to Aaron Rusnak) +-removed some dead and noncrystal code +-option for "sharp" corners +-use gradient bottom color for windowframe + +0.1.3 +-added ubuntu icon +-added/enabled some config options + (almost copied (back) from plastik) + +0.1.2 +-made it compile with KDE 3.3.0+ + +0.1.1 +-added spec file - this works for SUSE, I can't test this on other + distros. Please adapt it and send me your changes. +-changed the titlebar image and handling a bit to make it easier to adapt + +0.1 +-extracted from kdebase3-SUSE source package +-changed titlebar icon to debian logo +-added colorscheme + diff --git a/Doxyfile b/Doxyfile new file mode 100644 index 0000000..de21444 --- /dev/null +++ b/Doxyfile @@ -0,0 +1,279 @@ +# Doxyfile 1.5.1-KDevelop + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- +PROJECT_NAME = suse2.kdevelop +PROJECT_NUMBER = 0.4.1 +OUTPUT_DIRECTORY = +CREATE_SUBDIRS = NO +OUTPUT_LANGUAGE = English +USE_WINDOWS_ENCODING = NO +BRIEF_MEMBER_DESC = YES +REPEAT_BRIEF = YES +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the +ALWAYS_DETAILED_SEC = NO +INLINE_INHERITED_MEMB = NO +FULL_PATH_NAMES = YES +STRIP_FROM_PATH = /home/gerd/ +STRIP_FROM_INC_PATH = +SHORT_NAMES = NO +JAVADOC_AUTOBRIEF = NO +MULTILINE_CPP_IS_BRIEF = NO +DETAILS_AT_TOP = NO +INHERIT_DOCS = YES +SEPARATE_MEMBER_PAGES = NO +TAB_SIZE = 8 +ALIASES = +OPTIMIZE_OUTPUT_FOR_C = NO +OPTIMIZE_OUTPUT_JAVA = NO +BUILTIN_STL_SUPPORT = NO +DISTRIBUTE_GROUP_DOC = NO +SUBGROUPING = YES +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- +EXTRACT_ALL = NO +EXTRACT_PRIVATE = NO +EXTRACT_STATIC = NO +EXTRACT_LOCAL_CLASSES = YES +EXTRACT_LOCAL_METHODS = NO +HIDE_UNDOC_MEMBERS = NO +HIDE_UNDOC_CLASSES = NO +HIDE_FRIEND_COMPOUNDS = NO +HIDE_IN_BODY_DOCS = NO +INTERNAL_DOCS = NO +CASE_SENSE_NAMES = YES +HIDE_SCOPE_NAMES = NO +SHOW_INCLUDE_FILES = YES +INLINE_INFO = YES +SORT_MEMBER_DOCS = YES +SORT_BRIEF_DOCS = NO +SORT_BY_SCOPE_NAME = NO +GENERATE_TODOLIST = YES +GENERATE_TESTLIST = YES +GENERATE_BUGLIST = YES +GENERATE_DEPRECATEDLIST= YES +ENABLED_SECTIONS = +MAX_INITIALIZER_LINES = 30 +SHOW_USED_FILES = YES +SHOW_DIRECTORIES = YES +FILE_VERSION_FILTER = +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- +QUIET = NO +WARNINGS = YES +WARN_IF_UNDOCUMENTED = YES +WARN_IF_DOC_ERROR = YES +WARN_NO_PARAMDOC = NO +WARN_FORMAT = "$file:$line: $text" +WARN_LOGFILE = +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- +INPUT = /home/gerd/programming/kwin-decor-suse2-0.2 +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.idl \ + *.odl \ + *.cs \ + *.php \ + *.php3 \ + *.inc \ + *.m \ + *.mm \ + *.C \ + *.CC \ + *.C++ \ + *.II \ + *.I++ \ + *.H \ + *.HH \ + *.H++ \ + *.CS \ + *.PHP \ + *.PHP3 \ + *.M \ + *.MM \ + *.C \ + *.H \ + *.tlh \ + *.diff \ + *.patch \ + *.moc \ + *.xpm \ + *.dox +RECURSIVE = YES +EXCLUDE = +EXCLUDE_SYMLINKS = NO +EXCLUDE_PATTERNS = +EXAMPLE_PATH = +EXAMPLE_PATTERNS = * +EXAMPLE_RECURSIVE = NO +IMAGE_PATH = +INPUT_FILTER = +FILTER_PATTERNS = +FILTER_SOURCE_FILES = NO +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- +SOURCE_BROWSER = NO +INLINE_SOURCES = NO +STRIP_CODE_COMMENTS = YES +REFERENCED_BY_RELATION = YES +REFERENCES_RELATION = YES +REFERENCES_LINK_SOURCE = YES +USE_HTAGS = NO +VERBATIM_HEADERS = YES +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- +ALPHABETICAL_INDEX = NO +COLS_IN_ALPHA_INDEX = 5 +IGNORE_PREFIX = +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- +GENERATE_HTML = YES +HTML_OUTPUT = html +HTML_FILE_EXTENSION = .html +HTML_HEADER = +HTML_FOOTER = +HTML_STYLESHEET = +HTML_ALIGN_MEMBERS = YES +GENERATE_HTMLHELP = NO +CHM_FILE = +HHC_LOCATION = +GENERATE_CHI = NO +BINARY_TOC = NO +TOC_EXPAND = NO +DISABLE_INDEX = NO +ENUM_VALUES_PER_LINE = 4 +GENERATE_TREEVIEW = NO +TREEVIEW_WIDTH = 250 +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- +GENERATE_LATEX = YES +LATEX_OUTPUT = latex +LATEX_CMD_NAME = latex +MAKEINDEX_CMD_NAME = makeindex +COMPACT_LATEX = NO +PAPER_TYPE = a4wide +EXTRA_PACKAGES = +LATEX_HEADER = +PDF_HYPERLINKS = NO +USE_PDFLATEX = NO +LATEX_BATCHMODE = NO +LATEX_HIDE_INDICES = NO +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- +GENERATE_RTF = NO +RTF_OUTPUT = rtf +COMPACT_RTF = NO +RTF_HYPERLINKS = NO +RTF_STYLESHEET_FILE = +RTF_EXTENSIONS_FILE = +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- +GENERATE_MAN = NO +MAN_OUTPUT = man +MAN_EXTENSION = .3 +MAN_LINKS = NO +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- +GENERATE_XML = YES +XML_OUTPUT = xml +XML_SCHEMA = +XML_DTD = +XML_PROGRAMLISTING = YES +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- +GENERATE_AUTOGEN_DEF = NO +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- +GENERATE_PERLMOD = NO +PERLMOD_LATEX = NO +PERLMOD_PRETTY = YES +PERLMOD_MAKEVAR_PREFIX = +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- +ENABLE_PREPROCESSING = YES +MACRO_EXPANSION = NO +EXPAND_ONLY_PREDEF = NO +SEARCH_INCLUDES = YES +INCLUDE_PATH = +INCLUDE_FILE_PATTERNS = +PREDEFINED = +EXPAND_AS_DEFINED = +SKIP_FUNCTION_MACROS = YES +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- +TAGFILES = +GENERATE_TAGFILE = suse2.tag +ALLEXTERNALS = NO +EXTERNAL_GROUPS = YES +PERL_PATH = /usr/bin/perl +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- +CLASS_DIAGRAMS = YES +HIDE_UNDOC_RELATIONS = YES +HAVE_DOT = NO +CLASS_GRAPH = YES +COLLABORATION_GRAPH = YES +GROUP_GRAPHS = YES +UML_LOOK = NO +TEMPLATE_RELATIONS = NO +INCLUDE_GRAPH = YES +INCLUDED_BY_GRAPH = YES +CALL_GRAPH = NO +CALLER_GRAPH = NO +GRAPHICAL_HIERARCHY = YES +DIRECTORY_GRAPH = YES +DOT_IMAGE_FORMAT = png +DOT_PATH = +DOTFILE_DIRS = +MAX_DOT_GRAPH_WIDTH = 1024 +MAX_DOT_GRAPH_HEIGHT = 1024 +MAX_DOT_GRAPH_DEPTH = 1000 +DOT_TRANSPARENT = NO +DOT_MULTI_TARGETS = NO +GENERATE_LEGEND = YES +DOT_CLEANUP = YES +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- +SEARCHENGINE = NO diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..5534e45 --- /dev/null +++ b/INSTALL @@ -0,0 +1,193 @@ +Specific Installation +===================== + +Usually the chain + +./configure or ./configure --enable-final +make +make install + +should work. The installation paths are detected with kde-config. +If not you can tune them with the --prefix= option for configure. +For more options see the output of './configure --help'. + +For Debian based systems there is a debian/ directory +so you can execute 'dpkg-buildpackage [-rfakeroot]' +from inside the kwin-decor-suse2 directory. + +For RPM packages there is a spec file to build one with +'rpmbuild -tb XXX.tar.bz2'. + +For Gentoo Aaron Rusnak contributed a gentoo ebuild. +According to him it should be put in +$PORTDIR_OVERLAY/x11-themes/kwin-decor-suse2. +It points to the stable version on kde-look. + + +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes a while. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Type `make install' to install the programs and any data files and + documentation. + + 4. You can remove the program binaries and object files from the + source code directory by typing `make clean'. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..dd6709f --- /dev/null +++ b/Makefile.am @@ -0,0 +1 @@ +SUBDIRS = src po diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..b606d3f --- /dev/null +++ b/Makefile.in @@ -0,0 +1,854 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# KDE tags expanded automatically by am_edit - $Revision: 483858 $ +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = . +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + TODO admin/compile admin/config.guess admin/config.sub \ + admin/depcomp admin/install-sh admin/ltmain.sh admin/missing \ + admin/mkinstalldirs admin/ylwrap +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ +#>- html-recursive info-recursive install-data-recursive \ +#>- install-exec-recursive install-info-recursive \ +#>- install-recursive installcheck-recursive installdirs-recursive \ +#>- pdf-recursive ps-recursive uninstall-info-recursive \ +#>- uninstall-recursive +#>+ 6 +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive nmcheck-recursive bcheck-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +#>+ 1 +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AR = @AR@ +ARTSCCONFIG = @ARTSCCONFIG@ +AUTOCONF = @AUTOCONF@ +AUTODIRS = @AUTODIRS@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CONF_FILES = @CONF_FILES@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DCOPIDL = @DCOPIDL@ +DCOPIDL2CPP = @DCOPIDL2CPP@ +DCOPIDLNG = @DCOPIDLNG@ +DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ +GMSGFMT = @GMSGFMT@ +GREP = @GREP@ +HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ +KCONFIG_COMPILER = @KCONFIG_COMPILER@ +KDECONFIG = @KDECONFIG@ +KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ +KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ +KDE_INCLUDES = @KDE_INCLUDES@ +KDE_LDFLAGS = @KDE_LDFLAGS@ +KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ +KDE_MT_LIBS = @KDE_MT_LIBS@ +KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ +KDE_PLUGIN = @KDE_PLUGIN@ +KDE_RPATH = @KDE_RPATH@ +KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ +KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ +KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ +KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ +KDE_USE_FPIE = @KDE_USE_FPIE@ +KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ +KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ +KDE_USE_PIE = @KDE_USE_PIE@ +KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ +LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ +LIBCOMPAT = @LIBCOMPAT@ +LIBCRYPT = @LIBCRYPT@ +LIBDL = @LIBDL@ +LIBJPEG = @LIBJPEG@ +LIBOBJS = @LIBOBJS@ +LIBPNG = @LIBPNG@ +LIBPTHREAD = @LIBPTHREAD@ +LIBRESOLV = @LIBRESOLV@ +LIBS = @LIBS@ +LIBSM = @LIBSM@ +LIBSOCKET = @LIBSOCKET@ +LIBTOOL = @LIBTOOL@ +LIBUCB = @LIBUCB@ +LIBUTIL = @LIBUTIL@ +LIBZ = @LIBZ@ +LIB_KAB = @LIB_KAB@ +LIB_KABC = @LIB_KABC@ +LIB_KDECORE = @LIB_KDECORE@ +LIB_KDED = @LIB_KDED@ +LIB_KDEPIM = @LIB_KDEPIM@ +LIB_KDEPRINT = @LIB_KDEPRINT@ +LIB_KDEUI = @LIB_KDEUI@ +LIB_KDNSSD = @LIB_KDNSSD@ +LIB_KFILE = @LIB_KFILE@ +LIB_KFM = @LIB_KFM@ +LIB_KHTML = @LIB_KHTML@ +LIB_KIMPROXY = @LIB_KIMPROXY@ +LIB_KIO = @LIB_KIO@ +LIB_KJS = @LIB_KJS@ +LIB_KNEWSTUFF = @LIB_KNEWSTUFF@ +LIB_KPARTS = @LIB_KPARTS@ +LIB_KSPELL = @LIB_KSPELL@ +LIB_KSYCOCA = @LIB_KSYCOCA@ +LIB_KUNITTEST = @LIB_KUNITTEST@ +LIB_KUTILS = @LIB_KUTILS@ +LIB_POLL = @LIB_POLL@ +LIB_QPE = @LIB_QPE@ +LIB_QT = @LIB_QT@ +LIB_SMB = @LIB_SMB@ +LIB_X11 = @LIB_X11@ +LIB_XEXT = @LIB_XEXT@ +LIB_XRENDER = @LIB_XRENDER@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ +MCOPIDL = @MCOPIDL@ +MEINPROC = @MEINPROC@ +MOC = @MOC@ +MSGFMT = @MSGFMT@ +NOOPT_CFLAGS = @NOOPT_CFLAGS@ +NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +QTE_NORTTI = @QTE_NORTTI@ +QT_INCLUDES = @QT_INCLUDES@ +QT_LDFLAGS = @QT_LDFLAGS@ +RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TOPSUBDIRS = @TOPSUBDIRS@ +UIC = @UIC@ +UIC_TR = @UIC_TR@ +USER_INCLUDES = @USER_INCLUDES@ +USER_LDFLAGS = @USER_LDFLAGS@ +USE_EXCEPTIONS = @USE_EXCEPTIONS@ +USE_RTTI = @USE_RTTI@ +USE_THREADS = @USE_THREADS@ +VERSION = @VERSION@ +WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ +XGETTEXT = @XGETTEXT@ +XMKMF = @XMKMF@ +XMLLINT = @XMLLINT@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_INCLUDES = @X_INCLUDES@ +X_LDFLAGS = @X_LDFLAGS@ +X_PRE_LIBS = @X_PRE_LIBS@ +X_RPATH = @X_RPATH@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +all_includes = @all_includes@ +all_libraries = @all_libraries@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ +am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +include_ARTS_FALSE = @include_ARTS_FALSE@ +include_ARTS_TRUE = @include_ARTS_TRUE@ +include_x11_FALSE = @include_x11_FALSE@ +include_x11_TRUE = @include_x11_TRUE@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kde_appsdir = @kde_appsdir@ +kde_bindir = @kde_bindir@ +kde_confdir = @kde_confdir@ +kde_datadir = @kde_datadir@ +kde_htmldir = @kde_htmldir@ +kde_icondir = @kde_icondir@ +kde_includes = @kde_includes@ +kde_kcfgdir = @kde_kcfgdir@ +kde_libraries = @kde_libraries@ +kde_libs_htmldir = @kde_libs_htmldir@ +kde_libs_prefix = @kde_libs_prefix@ +kde_locale = @kde_locale@ +kde_mimedir = @kde_mimedir@ +kde_moduledir = @kde_moduledir@ +kde_qtver = @kde_qtver@ +kde_servicesdir = @kde_servicesdir@ +kde_servicetypesdir = @kde_servicetypesdir@ +kde_sounddir = @kde_sounddir@ +kde_styledir = @kde_styledir@ +kde_templatesdir = @kde_templatesdir@ +kde_wallpaperdir = @kde_wallpaperdir@ +kde_widgetdir = @kde_widgetdir@ +kdeinitdir = @kdeinitdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +qt_includes = @qt_includes@ +qt_libraries = @qt_libraries@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ +unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ +x_includes = @x_includes@ +x_libraries = @x_libraries@ +xdg_appsdir = @xdg_appsdir@ +xdg_directorydir = @xdg_directorydir@ +xdg_menudir = @xdg_menudir@ +SUBDIRS = src po +#>- all: config.h +#>+ 1 +all: docs-am config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) +#>- @for dep in $?; do \ +#>- case '$(am__configure_deps)' in \ +#>- *$$dep*) \ +#>- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ +#>- cd $(srcdir) && $(AUTOMAKE) --gnu \ +#>- && exit 0; \ +#>- exit 1;; \ +#>- esac; \ +#>- done; \ +#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ +#>- cd $(top_srcdir) && \ +#>- $(AUTOMAKE) --gnu Makefile +#>+ 14 + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ + ( \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + ) || exit 1; echo ' cd $(top_srcdir) && perl admin/am_edit '; cd $(top_srcdir) && perl admin/am_edit && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile + cd $(top_srcdir) && perl admin/am_edit Makefile.in +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) +#>- cd $(srcdir) && $(AUTOCONF) +#>+ 2 + cd $(srcdir) && rm -f configure + cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + $(mkdir_p) $(distdir)/admin + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile config.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +#>- clean: clean-recursive +#>+ 1 +clean: kde-rpo-clean clean-recursive + +#>- clean-am: clean-generic clean-libtool mostlyclean-am +#>+ 1 +clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ + check-am clean clean-generic clean-libtool clean-recursive \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-recursive distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am uninstall-info-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +#>+ 2 +KDE_DIST=suse2.kdevses stamp-h.in subdirs Makefile.in configure.files config.h.in suse2.kdevelop configure.in Makefile.cvs aclocal.m4 Doxyfile suse2.kdevelop.pcs configure.in.in Makefile.am acinclude.m4 configure kwin-decor-suse2.spec + +#>+ 2 +docs-am: + +#>+ 7 +force-reedit: + \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + + cd $(top_srcdir) && perl admin/am_edit Makefile.in + + +#>+ 21 +clean-bcheck: + rm -f *.bchecktest.cc *.bchecktest.cc.class a.out + +bcheck: bcheck-recursive + +bcheck-am: + @for i in ; do \ + if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ + echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ + echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ + echo "$$i"; \ + if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ + rm -f $$i.bchecktest.cc; exit 1; \ + fi ; \ + echo "" >> $$i.bchecktest.cc.class; \ + perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ + rm -f a.out; \ + fi ; \ + done + + +#>+ 3 +final: + $(MAKE) all-am + +#>+ 3 +final-install: + $(MAKE) install-am + +#>+ 3 +no-final: + $(MAKE) all-am + +#>+ 3 +no-final-install: + $(MAKE) install-am + +#>+ 3 +kde-rpo-clean: + -rm -f *.rpo + +#>+ 3 +nmcheck: +nmcheck-am: nmcheck diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..7bb805a --- /dev/null +++ b/NEWS @@ -0,0 +1 @@ +Please see ChangeLog. \ No newline at end of file diff --git a/README b/README new file mode 100644 index 0000000..e20e9ed --- /dev/null +++ b/README @@ -0,0 +1,12 @@ +This is the KWinDecoration extracted from SUSE 9.3/10.0. + +Meanwhile there are some additional options to change the logo, +titlealignment, sharp/round edges etc.. + +It is called SUSE2 in the KDE control center. +You should also adapt your colorscheme, +there's provided an example as SUSE2. + +Have a lot of fun! + +Gerd Fleischer \ No newline at end of file diff --git a/TODO b/TODO new file mode 100644 index 0000000..500dc6d --- /dev/null +++ b/TODO @@ -0,0 +1,13 @@ +-bugfixing +-translation + +Don't get to bloated. ;-) +Uhm, we're getting close. I guess all options I can think of are done now. +And as we have now deKorator and decgen everybody can make his own decoration. ;-) + +TODO for 0.5 +-port to KDE4/cmake + +As you can see it will take a longer time to 0.5. + +any other feature requests? \ No newline at end of file diff --git a/acinclude.m4 b/acinclude.m4 new file mode 100644 index 0000000..ffda7a5 --- /dev/null +++ b/acinclude.m4 @@ -0,0 +1,11920 @@ +## -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +dnl IMPORTANT NOTE: +dnl Please do not modify this file unless you expect your modifications to be +dnl carried into every other module in the repository. +dnl +dnl Single-module modifications are best placed in configure.in for kdelibs +dnl and kdebase or configure.in.in if present. + +# KDE_PATH_X_DIRECT +dnl Internal subroutine of AC_PATH_X. +dnl Set ac_x_includes and/or ac_x_libraries. +AC_DEFUN([KDE_PATH_X_DIRECT], +[ +AC_REQUIRE([KDE_CHECK_LIB64]) + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +AC_TRY_CPP([#include <$x_direct_test_include>], +[# We can compile using X headers with no special include directory. +ac_x_includes=], +[# Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done]) +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +AC_TRY_LINK([#include ], [${x_direct_test_function}(1)], +[LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries=], +[LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ + /usr/X11/lib${kdelibsuff} \ + /usr/X11R6/lib${kdelibsuff} \ + /usr/X11R5/lib${kdelibsuff} \ + /usr/X11R4/lib${kdelibsuff} \ + \ + /usr/lib${kdelibsuff}/X11 \ + /usr/lib${kdelibsuff}/X11R6 \ + /usr/lib${kdelibsuff}/X11R5 \ + /usr/lib${kdelibsuff}/X11R4 \ + \ + /usr/local/X11/lib${kdelibsuff} \ + /usr/local/X11R6/lib${kdelibsuff} \ + /usr/local/X11R5/lib${kdelibsuff} \ + /usr/local/X11R4/lib${kdelibsuff} \ + \ + /usr/local/lib${kdelibsuff}/X11 \ + /usr/local/lib${kdelibsuff}/X11R6 \ + /usr/local/lib${kdelibsuff}/X11R5 \ + /usr/local/lib${kdelibsuff}/X11R4 \ + \ + /usr/X386/lib${kdelibsuff} \ + /usr/x386/lib${kdelibsuff} \ + /usr/XFree86/lib${kdelibsuff}/X11 \ + \ + /usr/lib${kdelibsuff} \ + /usr/local/lib${kdelibsuff} \ + /usr/unsupported/lib${kdelibsuff} \ + /usr/athena/lib${kdelibsuff} \ + /usr/local/x11r5/lib${kdelibsuff} \ + /usr/lpp/Xamples/lib${kdelibsuff} \ + /lib/usr/lib${kdelibsuff}/X11 \ + \ + /usr/openwin/lib${kdelibsuff} \ + /usr/openwin/share/lib${kdelibsuff} \ + ; \ +do +dnl Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done]) +fi # $ac_x_libraries = NO +]) + + +dnl ------------------------------------------------------------------------ +dnl Find a file (or one of more files in a list of dirs) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_FIND_FILE], +[ +$3=NO +for i in $2; +do + for j in $1; + do + echo "configure: __oline__: $i/$j" >&AC_FD_CC + if test -r "$i/$j"; then + echo "taking that" >&AC_FD_CC + $3=$i + break 2 + fi + done +done +]) + +dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, +dnl if-not-found, test-parameter, prepend-path) +dnl +dnl Look for program-name in list-of-dirs+$PATH. +dnl If prepend-path is set, look in $PATH+list-of-dirs instead. +dnl If found, $variable-name is set. If not, if-not-found is evaluated. +dnl test-parameter: if set, the program is executed with this arg, +dnl and only a successful exit code is required. +AC_DEFUN([KDE_FIND_PATH], +[ + AC_MSG_CHECKING([for $1]) + if test -n "$$2"; then + kde_cv_path="$$2"; + else + kde_cache=`echo $1 | sed 'y%./+-%__p_%'` + + AC_CACHE_VAL(kde_cv_path_$kde_cache, + [ + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + dirs="" + for dir in $PATH; do + dirs="$dirs $dir" + done + if test -z "$6"; then dnl Append dirs in PATH (default) + dirs="$3 $dirs" + else dnl Prepend dirs in PATH (if 6th arg is set) + dirs="$dirs $3" + fi + IFS=$kde_save_IFS + + for dir in $dirs; do + if test -x "$dir/$1"; then + if test -n "$5" + then + evalstr="$dir/$1 $5 2>&1 " + if eval $evalstr; then + kde_cv_path="$dir/$1" + break + fi + else + kde_cv_path="$dir/$1" + break + fi + fi + done + + eval "kde_cv_path_$kde_cache=$kde_cv_path" + + ]) + + eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" + + fi + + if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then + AC_MSG_RESULT(not found) + $4 + else + AC_MSG_RESULT($kde_cv_path) + $2=$kde_cv_path + + fi +]) + +AC_DEFUN([KDE_MOC_ERROR_MESSAGE], +[ + AC_MSG_ERROR([No Qt meta object compiler (moc) found! +Please check whether you installed Qt correctly. +You need to have a running moc binary. +configure tried to run $ac_cv_path_moc and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable MOC to the right one before running +configure. +]) +]) + +AC_DEFUN([KDE_UIC_ERROR_MESSAGE], +[ + AC_MSG_WARN([No Qt ui compiler (uic) found! +Please check whether you installed Qt correctly. +You need to have a running uic binary. +configure tried to run $ac_cv_path_uic and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable UIC to the right one before running +configure. +]) +]) + + +AC_DEFUN([KDE_CHECK_UIC_FLAG], +[ + AC_MSG_CHECKING([whether uic supports -$1 ]) + kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` + AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, + [ + cat >conftest.ui < +EOT + ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" + if AC_TRY_EVAL(ac_uic_testrun); then + eval "kde_cv_prog_uic_$kde_cache=yes" + else + eval "kde_cv_prog_uic_$kde_cache=no" + fi + rm -f conftest* + ]) + + if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then + AC_MSG_RESULT([yes]) + : + $3 + else + AC_MSG_RESULT([no]) + : + $4 + fi +]) + + +dnl ------------------------------------------------------------------------ +dnl Find the meta object compiler and the ui compiler in the PATH, +dnl in $QTDIR/bin, and some more usual places +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_MOC_UIC], +[ + AC_REQUIRE([KDE_CHECK_PERL]) + qt_bindirs="" + for dir in $kde_qt_dirs; do + qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" + done + qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" + if test ! "$ac_qt_bindir" = "NO"; then + qt_bindirs="$ac_qt_bindir $qt_bindirs" + fi + + KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) + if test -z "$UIC_NOT_NEEDED"; then + KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) + if test -z "$UIC_PATH" ; then + KDE_UIC_ERROR_MESSAGE + exit 1 + else + UIC=$UIC_PATH + + if test $kde_qtver = 3; then + KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) + KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) + + if test x$ac_uic_supports_libpath = xyes; then + UIC="$UIC -L \$(kde_widgetdir)" + fi + if test x$ac_uic_supports_nounload = xyes; then + UIC="$UIC -nounload" + fi + fi + fi + else + UIC="echo uic not available: " + fi + + AC_SUBST(MOC) + AC_SUBST(UIC) + + UIC_TR="i18n" + if test $kde_qtver = 3; then + UIC_TR="tr2i18n" + fi + + AC_SUBST(UIC_TR) +]) + +AC_DEFUN([KDE_1_CHECK_PATHS], +[ + KDE_1_CHECK_PATH_HEADERS + + KDE_TEST_RPATH= + + if test -n "$USE_RPATH"; then + + if test -n "$kde_libraries"; then + KDE_TEST_RPATH="-R $kde_libraries" + fi + + if test -n "$qt_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" + fi + + if test -n "$x_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" + fi + + KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" + fi + +AC_MSG_CHECKING([for KDE libraries installed]) +ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR([your system fails at linking a small KDE application! +Check, if your compiler is installed correctly and if you have used the +same compiler to compile Qt and kdelibs as you did use now. +For more details about this problem, look at the end of config.log.]) +fi + +if eval `KDEDIR= ./conftest 2>&5`; then + kde_result=done +else + kde_result=problems +fi + +KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log +kde_have_all_paths=yes + +KDE_SET_PATHS($kde_result) + +]) + +AC_DEFUN([KDE_SET_PATHS], +[ + kde_cv_all_paths="kde_have_all_paths=\"yes\" \ + kde_htmldir=\"$kde_htmldir\" \ + kde_appsdir=\"$kde_appsdir\" \ + kde_icondir=\"$kde_icondir\" \ + kde_sounddir=\"$kde_sounddir\" \ + kde_datadir=\"$kde_datadir\" \ + kde_locale=\"$kde_locale\" \ + kde_cgidir=\"$kde_cgidir\" \ + kde_confdir=\"$kde_confdir\" \ + kde_kcfgdir=\"$kde_kcfgdir\" \ + kde_mimedir=\"$kde_mimedir\" \ + kde_toolbardir=\"$kde_toolbardir\" \ + kde_wallpaperdir=\"$kde_wallpaperdir\" \ + kde_templatesdir=\"$kde_templatesdir\" \ + kde_bindir=\"$kde_bindir\" \ + kde_servicesdir=\"$kde_servicesdir\" \ + kde_servicetypesdir=\"$kde_servicetypesdir\" \ + kde_moduledir=\"$kde_moduledir\" \ + kde_styledir=\"$kde_styledir\" \ + kde_widgetdir=\"$kde_widgetdir\" \ + xdg_appsdir=\"$xdg_appsdir\" \ + xdg_menudir=\"$xdg_menudir\" \ + xdg_directorydir=\"$xdg_directorydir\" \ + kde_result=$1" +]) + +AC_DEFUN([KDE_SET_DEFAULT_PATHS], +[ +if test "$1" = "default"; then + + if test -z "$kde_htmldir"; then + kde_htmldir='\${datadir}/doc/HTML' + fi + if test -z "$kde_appsdir"; then + kde_appsdir='\${datadir}/applnk' + fi + if test -z "$kde_icondir"; then + kde_icondir='\${datadir}/icons' + fi + if test -z "$kde_sounddir"; then + kde_sounddir='\${datadir}/sounds' + fi + if test -z "$kde_datadir"; then + kde_datadir='\${datadir}/apps' + fi + if test -z "$kde_locale"; then + kde_locale='\${datadir}/locale' + fi + if test -z "$kde_cgidir"; then + kde_cgidir='\${exec_prefix}/cgi-bin' + fi + if test -z "$kde_confdir"; then + kde_confdir='\${datadir}/config' + fi + if test -z "$kde_kcfgdir"; then + kde_kcfgdir='\${datadir}/config.kcfg' + fi + if test -z "$kde_mimedir"; then + kde_mimedir='\${datadir}/mimelnk' + fi + if test -z "$kde_toolbardir"; then + kde_toolbardir='\${datadir}/toolbar' + fi + if test -z "$kde_wallpaperdir"; then + kde_wallpaperdir='\${datadir}/wallpapers' + fi + if test -z "$kde_templatesdir"; then + kde_templatesdir='\${datadir}/templates' + fi + if test -z "$kde_bindir"; then + kde_bindir='\${exec_prefix}/bin' + fi + if test -z "$kde_servicesdir"; then + kde_servicesdir='\${datadir}/services' + fi + if test -z "$kde_servicetypesdir"; then + kde_servicetypesdir='\${datadir}/servicetypes' + fi + if test -z "$kde_moduledir"; then + if test "$kde_qtver" = "2"; then + kde_moduledir='\${libdir}/kde2' + else + kde_moduledir='\${libdir}/kde3' + fi + fi + if test -z "$kde_styledir"; then + kde_styledir='\${libdir}/kde3/plugins/styles' + fi + if test -z "$kde_widgetdir"; then + kde_widgetdir='\${libdir}/kde3/plugins/designer' + fi + if test -z "$xdg_appsdir"; then + xdg_appsdir='\${datadir}/applications/kde' + fi + if test -z "$xdg_menudir"; then + xdg_menudir='\${sysconfdir}/xdg/menus' + fi + if test -z "$xdg_directorydir"; then + xdg_directorydir='\${datadir}/desktop-directories' + fi + + KDE_SET_PATHS(defaults) + +else + + if test $kde_qtver = 1; then + AC_MSG_RESULT([compiling]) + KDE_1_CHECK_PATHS + else + AC_MSG_ERROR([path checking not yet supported for KDE 2]) + fi + +fi +]) + +AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], +[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || + test -z "$kde_icondir" || test -z "$kde_sounddir" || + test -z "$kde_datadir" || test -z "$kde_locale" || + test -z "$kde_cgidir" || test -z "$kde_confdir" || + test -z "$kde_kcfgdir" || + test -z "$kde_mimedir" || test -z "$kde_toolbardir" || + test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || + test -z "$kde_bindir" || test -z "$kde_servicesdir" || + test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || + test -z "$kde_styledir" || test -z "kde_widgetdir" || + test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || + test "x$kde_have_all_paths" != "xyes"; then + kde_have_all_paths=no + fi +]) + +AC_DEFUN([KDE_MISSING_PROG_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed KDE correctly. +]) +]) + +AC_DEFUN([KDE_MISSING_ARTS_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed aRts correctly or use +--without-arts to compile without aRts support (this will remove functionality). +]) +]) + +AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], +[ + kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" + test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" + if test -n "$KDEDIRS"; then + kde_save_IFS=$IFS + IFS=: + for dir in $KDEDIRS; do + kde_default_bindirs="$dir/bin $kde_default_bindirs " + done + IFS=$kde_save_IFS + fi +]) + +AC_DEFUN([KDE_SUBST_PROGRAMS], +[ + AC_ARG_WITH(arts, + AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), + [build_arts=$withval], + [build_arts=yes] + ) + AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") + if test "$build_arts" = "no"; then + AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) + fi + + KDE_SET_DEFAULT_BINDIRS + kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" + KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) + KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) + if test "$build_arts" '!=' "no"; then + KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) + KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) + fi + KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) + + kde32ornewer=1 + kde33ornewer=1 + if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then + kde32ornewer= + kde33ornewer= + else + if test "$kde_qtver" = "3"; then + if test "$kde_qtsubver" -le 1; then + kde32ornewer= + fi + if test "$kde_qtsubver" -le 2; then + kde33ornewer= + fi + if test "$KDECONFIG" != "compiled"; then + if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then + kde33ornewer= + fi + fi + fi + fi + + if test -n "$kde32ornewer"; then + KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) + KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) + fi + if test -n "$kde33ornewer"; then + KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) + AC_SUBST(MAKEKDEWIDGETS) + fi + KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) + + if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then + kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" + test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" + AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) + if test "$KDE_XSL_STYLESHEET" = "NO"; then + KDE_XSL_STYLESHEET="" + else + KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" + fi + fi + + DCOP_DEPENDENCIES='$(DCOPIDL)' + if test -n "$kde32ornewer"; then + KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' + DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' + AC_SUBST(KCONFIG_COMPILER) + AC_SUBST(KCFG_DEPENDENCIES) + AC_SUBST(DCOPIDLNG) + fi + AC_SUBST(DCOPIDL) + AC_SUBST(DCOPIDL2CPP) + AC_SUBST(DCOP_DEPENDENCIES) + AC_SUBST(MCOPIDL) + AC_SUBST(ARTSCCONFIG) + AC_SUBST(MEINPROC) + AC_SUBST(KDE_XSL_STYLESHEET) + AC_SUBST(XMLLINT) +])dnl + +AC_DEFUN([AC_CREATE_KFSSTND], +[ +AC_REQUIRE([AC_CHECK_RPATH]) + +AC_MSG_CHECKING([for KDE paths]) +kde_result="" +kde_cached_paths=yes +AC_CACHE_VAL(kde_cv_all_paths, +[ + KDE_SET_DEFAULT_PATHS($1) + kde_cached_paths=no +]) +eval "$kde_cv_all_paths" +KDE_CHECK_PATHS_FOR_COMPLETENESS +if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then + # wrong values were cached, may be, we can set better ones + kde_result= + kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= + kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= + kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= + kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= + kde_have_all_paths= + kde_styledir= + kde_widgetdir= + xdg_appsdir = xdg_menudir= xdg_directorydir= + KDE_SET_DEFAULT_PATHS($1) + eval "$kde_cv_all_paths" + KDE_CHECK_PATHS_FOR_COMPLETENESS + kde_result="$kde_result (cache overridden)" +fi +if test "$kde_have_all_paths" = "no"; then + AC_MSG_ERROR([configure could not run a little KDE program to test the environment. +Since it had compiled and linked before, it must be a strange problem on your system. +Look at config.log for details. If you are not able to fix this, look at +http://www.kde.org/faq/installation.html or any www.kde.org mirror. +(If you're using an egcs version on Linux, you may update binutils!) +]) +else + rm -f conftest* + AC_MSG_RESULT($kde_result) +fi + +bindir=$kde_bindir + +KDE_SUBST_PROGRAMS + +]) + +AC_DEFUN([AC_SUBST_KFSSTND], +[ +AC_SUBST(kde_htmldir) +AC_SUBST(kde_appsdir) +AC_SUBST(kde_icondir) +AC_SUBST(kde_sounddir) +AC_SUBST(kde_datadir) +AC_SUBST(kde_locale) +AC_SUBST(kde_confdir) +AC_SUBST(kde_kcfgdir) +AC_SUBST(kde_mimedir) +AC_SUBST(kde_wallpaperdir) +AC_SUBST(kde_bindir) +dnl X Desktop Group standards +AC_SUBST(xdg_appsdir) +AC_SUBST(xdg_menudir) +AC_SUBST(xdg_directorydir) +dnl for KDE 2 +AC_SUBST(kde_templatesdir) +AC_SUBST(kde_servicesdir) +AC_SUBST(kde_servicetypesdir) +AC_SUBST(kde_moduledir) +AC_SUBST(kdeinitdir, '$(kde_moduledir)') +AC_SUBST(kde_styledir) +AC_SUBST(kde_widgetdir) +if test "$kde_qtver" = 1; then + kde_minidir="$kde_icondir/mini" +else +# for KDE 1 - this breaks KDE2 apps using minidir, but +# that's the plan ;-/ + kde_minidir="/dev/null" +fi +dnl AC_SUBST(kde_minidir) +dnl AC_SUBST(kde_cgidir) +dnl AC_SUBST(kde_toolbardir) +]) + +AC_DEFUN([KDE_MISC_TESTS], +[ + dnl Checks for libraries. + AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD + AC_SUBST(LIBUTIL) + AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD + AC_SUBST(LIBCOMPAT) + kde_have_crypt= + AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], + AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ + AC_MSG_WARN([you have no crypt in either libcrypt or libc. +You should install libcrypt from another source or configure with PAM +support]) + kde_have_crypt=no + ])) + AC_SUBST(LIBCRYPT) + if test $kde_have_crypt = yes; then + AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) + fi + AC_CHECK_SOCKLEN_T + AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + AC_CHECK_LIB(dnet_stub, dnet_ntoa, + [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) + fi + AC_CHECK_FUNC(inet_ntoa) + if test $ac_cv_func_inet_ntoa = no; then + AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") + fi + AC_CHECK_FUNC(connect) + if test $ac_cv_func_connect = no; then + AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , + $X_EXTRA_LIBS) + fi + + AC_CHECK_FUNC(remove) + if test $ac_cv_func_remove = no; then + AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + AC_CHECK_FUNC(shmat, , + AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) + + # more headers that need to be explicitly included on darwin + AC_CHECK_HEADERS(sys/types.h stdint.h) + + # sys/bitypes.h is needed for uint32_t and friends on Tru64 + AC_CHECK_HEADERS(sys/bitypes.h) + + # darwin requires a poll emulation library + AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") + + # for some image handling on Mac OS X + AC_CHECK_HEADERS(Carbon/Carbon.h) + + # CoreAudio framework + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ + AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) + FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" + ]) + + AC_CHECK_RES_INIT + AC_SUBST(LIB_POLL) + AC_SUBST(FRAMEWORK_COREAUDIO) + LIBSOCKET="$X_EXTRA_LIBS" + AC_SUBST(LIBSOCKET) + AC_SUBST(X_EXTRA_LIBS) + AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 + AC_SUBST(LIBUCB) + + case $host in dnl this *is* LynxOS specific + *-*-lynxos* ) + AC_MSG_CHECKING([LynxOS header file wrappers]) + [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] + AC_MSG_RESULT(disabled) + AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS + ;; + esac + + KDE_CHECK_TYPES + KDE_CHECK_LIBDL + KDE_CHECK_STRLCPY + KDE_CHECK_PIE_SUPPORT + +# darwin needs this to initialize the environment +AC_CHECK_HEADERS(crt_externs.h) +AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) + +AH_VERBATIM(_DARWIN_ENVIRON, +[ +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include +# include +# define environ (*_NSGetEnviron()) +#endif +]) + +AH_VERBATIM(_AIX_STRINGS_H_BZERO, +[ +/* + * AIX defines FD_SET in terms of bzero, but fails to include + * that defines bzero. + */ + +#if defined(_AIX) +#include +#endif +]) + +AC_CHECK_FUNCS([vsnprintf snprintf]) + +AH_VERBATIM(_TRU64,[ +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include +#include +#else +#include +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Find the header files and libraries for X-Windows. Extended the +dnl macro AC_PATH_X +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([K_PATH_X], +[ +AC_REQUIRE([KDE_MISC_TESTS])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_ARG_ENABLE( + embedded, + AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), + kde_use_qt_emb=$enableval, + kde_use_qt_emb=no +) + +AC_ARG_ENABLE( + qtopia, + AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), + kde_use_qt_emb_palm=$enableval, + kde_use_qt_emb_palm=no +) + +AC_ARG_ENABLE( + mac, + AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), + kde_use_qt_mac=$enableval, + kde_use_qt_mac=no +) + +# used to disable x11-specific stuff on special platforms +AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") + +if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then + +AC_MSG_CHECKING(for X) + +AC_CACHE_VAL(kde_cv_have_x, +[# One or both of the vars are not set, and there is no cached value. +if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then + kde_x_includes=NO +else + kde_x_includes=$x_includes +fi +if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then + kde_x_libraries=NO +else + kde_x_libraries=$x_libraries +fi + +# below we use the standard autoconf calls +ac_x_libraries=$kde_x_libraries +ac_x_includes=$kde_x_includes + +KDE_PATH_X_DIRECT +dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. +dnl Unfortunately, if compiling with the N32 ABI, this is not the correct +dnl location. The correct location is /usr/lib32 or an undefined value +dnl (the linker is smart enough to pick the correct default library). +dnl Things work just fine if you use just AC_PATH_X_DIRECT. +dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to +dnl /usr/openwin/include, which doesn't work. /usr/include does work, so +dnl x_includes should be left alone. +case "$host" in +mips-sgi-irix6*) + ;; +*-*-solaris*) + ;; +*) + _AC_PATH_X_XMKMF + if test -z "$ac_x_includes"; then + ac_x_includes="." + fi + if test -z "$ac_x_libraries"; then + ac_x_libraries="/usr/lib${kdelibsuff}" + fi +esac +#from now on we use our own again + +# when the user already gave --x-includes, we ignore +# what the standard autoconf macros told us. +if test "$kde_x_includes" = NO; then + kde_x_includes=$ac_x_includes +fi + +# for --x-libraries too +if test "$kde_x_libraries" = NO; then + kde_x_libraries=$ac_x_libraries +fi + +if test "$kde_x_includes" = NO; then + AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) +fi + +if test "$kde_x_libraries" = NO; then + AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) +fi + +# Record where we found X for the cache. +kde_cv_have_x="have_x=yes \ + kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" +])dnl + +eval "$kde_cv_have_x" + +if test "$have_x" != yes; then + AC_MSG_RESULT($have_x) + no_x=yes +else + AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) +fi + +if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then + X_INCLUDES="" + x_includes="."; dnl better than nothing :- + else + x_includes=$kde_x_includes + X_INCLUDES="-I$x_includes" +fi + +if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then + X_LDFLAGS="" + x_libraries="/usr/lib"; dnl better than nothing :- + else + x_libraries=$kde_x_libraries + X_LDFLAGS="-L$x_libraries" +fi +all_includes="$X_INCLUDES" +all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" + +# Check for libraries that X11R6 Xt/Xaw programs need. +ac_save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +# check for ICE first), but we must link in the order -lSM -lICE or +# we get undefined symbols. So assume we have SM if we have ICE. +# These have to be linked with before -lX11, unlike the other +# libraries we check for below, so use a different variable. +# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +AC_CHECK_LIB(ICE, IceConnectionNumber, + [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) +LDFLAGS="$ac_save_LDFLAGS" + +LIB_X11='-lX11 $(LIBSOCKET)' + +AC_MSG_CHECKING(for libXext) +AC_CACHE_VAL(kde_cv_have_libXext, +[ +kde_ldflags_safe="$LDFLAGS" +kde_libs_safe="$LIBS" + +LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" +LIBS="-lXext -lX11 $LIBSOCKET" + +AC_TRY_LINK([ +#include +#ifdef STDC_HEADERS +# include +#endif +], +[ +printf("hello Xext\n"); +], +kde_cv_have_libXext=yes, +kde_cv_have_libXext=no +) + +LDFLAGS=$kde_ldflags_safe +LIBS=$kde_libs_safe +]) + +AC_MSG_RESULT($kde_cv_have_libXext) + +if test "$kde_cv_have_libXext" = "no"; then + AC_MSG_ERROR([We need a working libXext to proceed. Since configure +can't find it itself, we stop here assuming that make wouldn't find +them either.]) +fi + +LIB_XEXT="-lXext" +QTE_NORTTI="" + +elif test "$kde_use_qt_emb" = "yes"; then + dnl We're using QT Embedded + CPPFLAGS=-DQWS + CXXFLAGS="$CXXFLAGS -fno-rtti" + QTE_NORTTI="-fno-rtti -DQWS" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +elif test "$kde_use_qt_mac" = "yes"; then + dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to + dnl be included to get the information) --Sam + CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" + CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +fi +AC_SUBST(X_PRE_LIBS) +AC_SUBST(LIB_X11) +AC_SUBST(LIB_XRENDER) +AC_SUBST(LIBSM) +AC_SUBST(X_INCLUDES) +AC_SUBST(X_LDFLAGS) +AC_SUBST(x_includes) +AC_SUBST(x_libraries) +AC_SUBST(QTE_NORTTI) +AC_SUBST(LIB_XEXT) + +]) + +AC_DEFUN([KDE_PRINT_QT_PROGRAM], +[ +AC_REQUIRE([KDE_USE_QT]) +cat > conftest.$ac_ext < +#include +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext < +#include +#include +EOF + +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <> conftest.$ac_ext < +#include +#include +EOF +fi + +echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext +cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC +fi + +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" +export LD_LIBRARY_PATH +LIBRARY_PATH="$ac_LIBRARY_PATH" +export LIBRARY_PATH +AC_LANG_RESTORE +]) + +if test "$kde_cv_qt_direct" = "yes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the Qt headers and libraries. +dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) +dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_1_3], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([KDE_USE_QT]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +dnl ------------------------------------------------------------------------ +dnl Add configure flag to enable linking to MT version of Qt library. +dnl ------------------------------------------------------------------------ + +AC_ARG_ENABLE( + mt, + AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), + kde_use_qt_mt=$enableval, + [ + if test $kde_qtver = 3; then + kde_use_qt_mt=yes + else + kde_use_qt_mt=no + fi + ] +) + +USING_QT_MT="" + +dnl ------------------------------------------------------------------------ +dnl If we not get --disable-qt-mt then adjust some vars for the host. +dnl ------------------------------------------------------------------------ + +KDE_MT_LDFLAGS= +KDE_MT_LIBS= +if test "x$kde_use_qt_mt" = "xyes"; then + KDE_CHECK_THREADING + if test "x$kde_use_threading" = "xyes"; then + CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" + KDE_MT_LDFLAGS="$USE_THREADS" + KDE_MT_LIBS="$LIBPTHREAD" + else + kde_use_qt_mt=no + fi +fi +AC_SUBST(KDE_MT_LDFLAGS) +AC_SUBST(KDE_MT_LIBS) + +kde_qt_was_given=yes + +dnl ------------------------------------------------------------------------ +dnl If we haven't been told how to link to Qt, we work it out for ourselves. +dnl ------------------------------------------------------------------------ +if test -z "$LIBQT_GLOB"; then + if test "x$kde_use_qt_emb" = "xyes"; then + LIBQT_GLOB="libqte.*" + else + LIBQT_GLOB="libqt.*" + fi +fi + +dnl ------------------------------------------------------------ +dnl If we got --enable-embedded then adjust the Qt library name. +dnl ------------------------------------------------------------ +if test "x$kde_use_qt_emb" = "xyes"; then + qtlib="qte" +else + qtlib="qt" +fi + +kde_int_qt="-l$qtlib" + +if test -z "$LIBQPE"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-palmtop then add -lqpe to the link line +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + if test "x$kde_use_qt_emb_palm" = "xyes"; then + LIB_QPE="-lqpe" + else + LIB_QPE="" + fi + else + LIB_QPE="" + fi +fi + +dnl ------------------------------------------------------------------------ +dnl If we got --enable-qt-mt then adjust the Qt library name for the host. +dnl ------------------------------------------------------------------------ + +if test "x$kde_use_qt_mt" = "xyes"; then + LIBQT="-l$qtlib-mt" + kde_int_qt="-l$qtlib-mt" + LIBQT_GLOB="lib$qtlib-mt.*" + USING_QT_MT="using -mt" +else + LIBQT="-l$qtlib" +fi + +if test $kde_qtver != 1; then + + AC_REQUIRE([AC_FIND_PNG]) + AC_REQUIRE([AC_FIND_JPEG]) + LIBQT="$LIBQT $LIBPNG $LIBJPEG" +fi + +if test $kde_qtver = 3; then + AC_REQUIRE([KDE_CHECK_LIBDL]) + LIBQT="$LIBQT $LIBDL" +fi + +AC_MSG_CHECKING([for Qt]) + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" +fi +ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO +qt_libraries="" +qt_includes="" +AC_ARG_WITH(qt-dir, + AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), + [ ac_qt_includes="$withval"/include + ac_qt_libraries="$withval"/lib${kdelibsuff} + ac_qt_bindir="$withval"/bin + ]) + +AC_ARG_WITH(qt-includes, + AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), + [ + ac_qt_includes="$withval" + ]) + +kde_qt_libs_given=no + +AC_ARG_WITH(qt-libraries, + AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), + [ ac_qt_libraries="$withval" + kde_qt_libs_given=yes + ]) + +AC_CACHE_VAL(ac_cv_have_qt, +[#try to guess Qt locations + +qt_incdirs="" +for dir in $kde_qt_dirs; do + qt_incdirs="$qt_incdirs $dir/include $dir" +done +qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" +if test ! "$ac_qt_includes" = "NO"; then + qt_incdirs="$ac_qt_includes $qt_incdirs" +fi + +if test "$kde_qtver" != "1"; then + kde_qt_header=qstyle.h +else + kde_qt_header=qglobal.h +fi + +AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) +ac_qt_includes="$qt_incdir" + +qt_libdirs="" +for dir in $kde_qt_dirs; do + qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" +done +qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" +if test ! "$ac_qt_libraries" = "NO"; then + qt_libdir=$ac_qt_libraries +else + qt_libdirs="$ac_qt_libraries $qt_libdirs" + # if the Qt was given, the chance is too big that libqt.* doesn't exist + qt_libdir=NONE + for dir in $qt_libdirs; do + try="ls -1 $dir/${LIBQT_GLOB}" + if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done +fi +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIBQT="$LIBQT ${kde_int_qt}_incremental" + break + fi +done + +ac_qt_libraries="$qt_libdir" + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" +LIBS="$LIBS $LIBQT $KDE_MT_LIBS" + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC + ac_qt_libraries="NO" +fi +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +AC_LANG_RESTORE +if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then + ac_cv_have_qt="have_qt=no" + ac_qt_notfound="" + missing_qt_mt="" + if test "$ac_qt_includes" = NO; then + if test "$ac_qt_libraries" = NO; then + ac_qt_notfound="(headers and libraries)"; + else + ac_qt_notfound="(headers)"; + fi + else + if test "x$kde_use_qt_mt" = "xyes"; then + missing_qt_mt=" +Make sure that you have compiled Qt with thread support!" + ac_qt_notfound="(library $qtlib-mt)"; + else + ac_qt_notfound="(library $qtlib)"; + fi + fi + + AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! +For more details about this problem, look at the end of config.log.$missing_qt_mt]) +else + have_qt="yes" +fi +]) + +eval "$ac_cv_have_qt" + +if test "$have_qt" != yes; then + AC_MSG_RESULT([$have_qt]); +else + ac_cv_have_qt="have_qt=yes \ + ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" + AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) + + qt_libraries="$ac_qt_libraries" + qt_includes="$ac_qt_includes" +fi + +if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then + KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) +fi + +AC_SUBST(qt_libraries) +AC_SUBST(qt_includes) + +if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then + QT_INCLUDES="" +else + QT_INCLUDES="-I$qt_includes" + all_includes="$QT_INCLUDES $all_includes" +fi + +if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then + QT_LDFLAGS="" +else + QT_LDFLAGS="-L$qt_libraries" + all_libraries="$QT_LDFLAGS $all_libraries" +fi +test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" + +AC_SUBST(QT_INCLUDES) +AC_SUBST(QT_LDFLAGS) +AC_PATH_QT_MOC_UIC + +KDE_CHECK_QT_JPEG + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' +else +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' +fi +test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIB_QT="$LIB_QT ${kde_int_qt}_incremental" + break + fi +done + +AC_SUBST(LIB_QT) +AC_SUBST(LIB_QPE) + +AC_SUBST(kde_qtver) +]) + +AC_DEFUN([AC_PATH_QT], +[ +AC_PATH_QT_1_3 +]) + +AC_DEFUN([KDE_CHECK_UIC_PLUGINS], +[ +AC_REQUIRE([AC_PATH_QT_MOC_UIC]) + +if test x$ac_uic_supports_libpath = xyes; then + +AC_MSG_CHECKING([if UIC has KDE plugins available]) +AC_CACHE_VAL(kde_cv_uic_plugins, +[ +cat > actest.ui << EOF + +NewConnectionDialog + + + + testInput + + + + +EOF + + + +kde_cv_uic_plugins=no +kde_line="$UIC_PATH -L $kde_widgetdir" +if test x$ac_uic_supports_nounload = xyes; then + kde_line="$kde_line -nounload" +fi +kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" +if AC_TRY_EVAL(kde_line); then + # if you're trying to debug this check and think it's incorrect, + # better check your installation. The check _is_ correct - your + # installation is not. + if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then + kde_cv_uic_plugins=yes + fi +fi +rm -f actest.ui actest.cpp +]) + +AC_MSG_RESULT([$kde_cv_uic_plugins]) +if test "$kde_cv_uic_plugins" != yes; then + AC_MSG_ERROR([ +you need to install kdelibs first. + +If you did install kdelibs, then the Qt version that is picked up by +this configure is not the same version you used to compile kdelibs. +The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the +_same Qt version_, compiled with the _same compiler_ and the same Qt +configuration settings. +]) +fi +fi +]) + +AC_DEFUN([KDE_CHECK_FINAL], +[ + AC_ARG_ENABLE(final, + AC_HELP_STRING([--enable-final], + [build size optimized apps (experimental - needs lots of memory)]), + kde_use_final=$enableval, kde_use_final=no) + + if test "x$kde_use_final" = "xyes"; then + KDE_USE_FINAL_TRUE="" + KDE_USE_FINAL_FALSE="#" + else + KDE_USE_FINAL_TRUE="#" + KDE_USE_FINAL_FALSE="" + fi + AC_SUBST(KDE_USE_FINAL_TRUE) + AC_SUBST(KDE_USE_FINAL_FALSE) +]) + +AC_DEFUN([KDE_CHECK_CLOSURE], +[ + AC_ARG_ENABLE(closure, + AC_HELP_STRING([--enable-closure],[delay template instantiation]), + kde_use_closure=$enableval, kde_use_closure=no) + + KDE_NO_UNDEFINED="" + if test "x$kde_use_closure" = "xyes"; then + KDE_USE_CLOSURE_TRUE="" + KDE_USE_CLOSURE_FALSE="#" +# CXXFLAGS="$CXXFLAGS $REPO" + else + KDE_USE_CLOSURE_TRUE="#" + KDE_USE_CLOSURE_FALSE="" + KDE_NO_UNDEFINED="" + case $host in + *-*-linux-gnu) + KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], + [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], + [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], + [KDE_NO_UNDEFINED=""])], + [KDE_NO_UNDEFINED=""]) + ;; + esac + fi + AC_SUBST(KDE_USE_CLOSURE_TRUE) + AC_SUBST(KDE_USE_CLOSURE_FALSE) + AC_SUBST(KDE_NO_UNDEFINED) +]) + +dnl Check if the linker supports --enable-new-dtags and --as-needed +AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], +[ + AC_ARG_ENABLE(new_ldflags, + AC_HELP_STRING([--enable-new-ldflags], + [enable the new linker flags]), + kde_use_new_ldflags=$enableval, + kde_use_new_ldflags=no) + + LDFLAGS_AS_NEEDED="" + LDFLAGS_NEW_DTAGS="" + if test "x$kde_use_new_ldflags" = "xyes"; then + LDFLAGS_NEW_DTAGS="" + KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], + [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) + + KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], + [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) + fi + AC_SUBST(LDFLAGS_AS_NEEDED) + AC_SUBST(LDFLAGS_NEW_DTAGS) +]) + +AC_DEFUN([KDE_CHECK_NMCHECK], +[ + AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), + kde_use_nmcheck=$enableval, kde_use_nmcheck=no) + + if test "$kde_use_nmcheck" = "yes"; then + KDE_USE_NMCHECK_TRUE="" + KDE_USE_NMCHECK_FALSE="#" + else + KDE_USE_NMCHECK_TRUE="#" + KDE_USE_NMCHECK_FALSE="" + fi + AC_SUBST(KDE_USE_NMCHECK_TRUE) + AC_SUBST(KDE_USE_NMCHECK_FALSE) +]) + +AC_DEFUN([KDE_EXPAND_MAKEVAR], [ +savex=$exec_prefix +test "x$exec_prefix" = xNONE && exec_prefix=$prefix +tmp=$$2 +while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done +exec_prefix=$savex +]) + +dnl ------------------------------------------------------------------------ +dnl Now, the same with KDE +dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) +dnl and $(kde_includes) will be the kdehdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_BASE_PATH_KDE], +[ +AC_REQUIRE([KDE_CHECK_STL]) +AC_REQUIRE([AC_PATH_QT])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_CHECK_RPATH +AC_MSG_CHECKING([for KDE]) + +if test "${prefix}" != NONE; then + kde_includes=${includedir} + KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) + + kde_libraries=${libdir} + KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) + +else + ac_kde_includes= + ac_kde_libraries= + kde_libraries="" + kde_includes="" +fi + +AC_CACHE_VAL(ac_cv_have_kde, +[#try to guess kde locations + +if test "$kde_qtver" = 1; then + kde_check_header="ksock.h" + kde_check_lib="libkdecore.la" +else + kde_check_header="ksharedptr.h" + kde_check_lib="libkio.la" +fi + +if test -z "$1"; then + +kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" +test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" +kde_incdirs="$ac_kde_includes $kde_incdirs" +AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) +ac_kde_includes="$kde_incdir" + +if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then + AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE headers installed. This will fail. +So, check this please and use another prefix!]) +fi + +kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" +test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" +kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" +AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) +ac_kde_libraries="$kde_libdir" + +kde_widgetdir=NO +dnl this might be somewhere else +AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) + +if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then +AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE libraries installed. This will fail. +So, check this please and use another prefix!]) +fi + +if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then +AC_MSG_ERROR([ +I can't find the designer plugins. These are required and should have been installed +by kdelibs]) +fi + +if test -n "$kde_widgetdir"; then + kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" +fi + + +if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then + ac_cv_have_kde="have_kde=no" +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" +fi + +else dnl test -z $1, e.g. from kdelibs + + ac_cv_have_kde="have_kde=no" + +fi +])dnl + +eval "$ac_cv_have_kde" + +if test "$have_kde" != "yes"; then + if test "${prefix}" = NONE; then + ac_kde_prefix="$ac_default_prefix" + else + ac_kde_prefix="$prefix" + fi + if test "$exec_prefix" = NONE; then + ac_kde_exec_prefix="$ac_kde_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix]) + else + ac_kde_exec_prefix="$exec_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) + fi + + kde_libraries="${libdir}" + kde_includes="${includedir}" + +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" + AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) + + kde_libraries="$ac_kde_libraries" + kde_includes="$ac_kde_includes" +fi +AC_SUBST(kde_libraries) +AC_SUBST(kde_includes) + +if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then + KDE_INCLUDES="" +else + KDE_INCLUDES="-I$kde_includes" + all_includes="$KDE_INCLUDES $all_includes" +fi + +KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" + +KDE_LDFLAGS="-L$kde_libraries" +if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then + all_libraries="$KDE_LDFLAGS $all_libraries" +fi + +AC_SUBST(KDE_LDFLAGS) +AC_SUBST(KDE_INCLUDES) + +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +all_libraries="$all_libraries $USER_LDFLAGS" +all_includes="$all_includes $USER_INCLUDES" +AC_SUBST(all_includes) +AC_SUBST(all_libraries) + +if test -z "$1"; then +KDE_CHECK_UIC_PLUGINS +fi + +ac_kde_libraries="$kde_libdir" + +AC_SUBST(AUTODIRS) + + +]) + +AC_DEFUN([KDE_CHECK_EXTRA_LIBS], +[ +AC_MSG_CHECKING(for extra includes) +AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), + kde_use_extra_includes="$withval", + kde_use_extra_includes=NONE +) +kde_extra_includes= +if test -n "$kde_use_extra_includes" && \ + test "$kde_use_extra_includes" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_includes; do + kde_extra_includes="$kde_extra_includes $dir" + USER_INCLUDES="$USER_INCLUDES -I$dir" + done + IFS=$ac_save_ifs + kde_use_extra_includes="added" +else + kde_use_extra_includes="no" +fi +AC_SUBST(USER_INCLUDES) + +AC_MSG_RESULT($kde_use_extra_includes) + +kde_extra_libs= +AC_MSG_CHECKING(for extra libs) +AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), + kde_use_extra_libs=$withval, + kde_use_extra_libs=NONE +) +if test -n "$kde_use_extra_libs" && \ + test "$kde_use_extra_libs" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_libs; do + kde_extra_libs="$kde_extra_libs $dir" + KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" + USER_LDFLAGS="$USER_LDFLAGS -L$dir" + done + IFS=$ac_save_ifs + kde_use_extra_libs="added" +else + kde_use_extra_libs="no" +fi + +AC_SUBST(USER_LDFLAGS) + +AC_MSG_RESULT($kde_use_extra_libs) + +]) + +AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], +[ + AC_MSG_CHECKING([for KDE headers installed]) + AC_LANG_SAVE + AC_LANG_CPLUSPLUS +cat > conftest.$ac_ext < +#endif +#include +#include "confdefs.h" +#include + +int main() { + printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); + printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); + printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); + printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); + printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); + printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); + printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); + printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); + printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); + printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); + printf("kde_wallpaperdir=\\"%s\\"\n", + KApplication::kde_wallpaperdir().data()); + printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); + printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); + printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); + printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); + printf("kde_moduledir=\\"/tmp/dummy\\"\n"); + printf("kde_styledir=\\"/tmp/dummy\\"\n"); + printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); + printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); + printf("xdg_menudir=\\"/tmp/dummy\\"\n"); + printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); + printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); + return 0; + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$all_includes $CPPFLAGS" + if AC_TRY_EVAL(ac_compile); then + AC_MSG_RESULT(yes) + else + AC_MSG_ERROR([your system is not able to compile a small KDE application! +Check, if you installed the KDE header files correctly. +For more details about this problem, look at the end of config.log.]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_KDEQTADDON], +[ +AC_MSG_CHECKING(for kde-qt-addon) +AC_CACHE_VAL(kde_cv_have_kdeqtaddon, +[ + kde_ldflags_safe="$LDFLAGS" + kde_libs_safe="$LIBS" + kde_cxxflags_safe="$CXXFLAGS" + + LIBS="-lkde-qt-addon $LIBQT $LIBS" + CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" + LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" + + AC_TRY_LINK([ + #include + ], + [ + QDomDocument doc; + ], + kde_cv_have_kdeqtaddon=yes, + kde_cv_have_kdeqtaddon=no + ) + + LDFLAGS=$kde_ldflags_safe + LIBS=$kde_libs_safe + CXXFLAGS=$kde_cxxflags_safe +]) + +AC_MSG_RESULT($kde_cv_have_kdeqtaddon) + +if test "$kde_cv_have_kdeqtaddon" = "no"; then + AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. +It is a separate package (and CVS module) named kde-qt-addon.]) +fi +]) + +AC_DEFUN([KDE_CREATE_LIBS_ALIASES], +[ + AC_REQUIRE([KDE_MISC_TESTS]) + AC_REQUIRE([KDE_CHECK_LIBDL]) + AC_REQUIRE([K_PATH_X]) + +if test $kde_qtver = 3; then + case $host in + *cygwin*) lib_kded="-lkdeinit_kded" ;; + *) lib_kded="" ;; + esac + AC_SUBST(LIB_KDED, $lib_kded) + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KJS, "-lkjs") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KABC, "-lkabc") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") + AC_SUBST(LIB_KUTILS, "-lkutils") + AC_SUBST(LIB_KDEPIM, "-lkdepim") + AC_SUBST(LIB_KIMPROXY, "-lkimproxy") + AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") + AC_SUBST(LIB_KDNSSD, "-lkdnssd") + AC_SUBST(LIB_KUNITTEST, "-lkunittest") +# these are for backward compatibility + AC_SUBST(LIB_KSYCOCA, "-lkio") + AC_SUBST(LIB_KFILE, "-lkio") +elif test $kde_qtver = 2; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KSYCOCA, "-lksycoca") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KFILE, "-lkfile") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") +else + AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") + AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") + AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") + AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") + AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") +fi +]) + +AC_DEFUN([AC_PATH_KDE], +[ + AC_BASE_PATH_KDE + AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), + [ + if test "$enableval" = "no"; + then ac_use_path_checking="default" + else ac_use_path_checking="" + fi + ], + [ + if test "$kde_qtver" = 1; + then ac_use_path_checking="" + else ac_use_path_checking="default" + fi + ] + ) + + AC_CREATE_KFSSTND($ac_use_path_checking) + + AC_SUBST_KFSSTND + KDE_CREATE_LIBS_ALIASES +]) + +dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) +AC_DEFUN([KDE_CHECK_FUNC_EXT], +[ +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(kde_cv_func_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +save_CXXFLAGS="$CXXFLAGS" +kde_safe_LIBS="$LIBS" +LIBS="$LIBS $X_EXTRA_LIBS" +if test "$GXX" = "yes"; then +CXXFLAGS="$CXXFLAGS -pedantic-errors" +fi +AC_TRY_COMPILE([ +$2 +], +[ +$3 +], +kde_cv_func_$1=yes, +kde_cv_func_$1=no) +CXXFLAGS="$save_CXXFLAGS" +LIBS="$kde_safe_LIBS" +AC_LANG_RESTORE +]) + +AC_MSG_RESULT($kde_cv_func_$1) + +AC_MSG_CHECKING([if $1 needs custom prototype]) +AC_CACHE_VAL(kde_cv_proto_$1, +[ +if test "x$kde_cv_func_$1" = xyes; then + kde_cv_proto_$1=no +else + case "$1" in + setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) + kde_cv_proto_$1="yes - in libkdefakes" + ;; + *) + kde_cv_proto_$1=unknown + ;; + esac +fi + +if test "x$kde_cv_proto_$1" = xunknown; then + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + kde_safe_libs=$LIBS + LIBS="$LIBS $X_EXTRA_LIBS" + AC_TRY_LINK([ +$2 + +extern "C" $4; +], +[ +$3 +], +[ kde_cv_func_$1=yes + kde_cv_proto_$1=yes ], + [kde_cv_proto_$1="$1 unavailable"] +) +LIBS=$kde_safe_libs +AC_LANG_RESTORE +fi +]) +AC_MSG_RESULT($kde_cv_proto_$1) + +if test "x$kde_cv_func_$1" = xyes; then + AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) + $6 +fi +if test "x$kde_cv_proto_$1" = xno; then + AC_DEFINE(HAVE_$5_PROTO, 1, + [Define if you have the $1 prototype]) +fi + +AH_VERBATIM([_HAVE_$5_PROTO], +[ +#if !defined(HAVE_$5_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +$4; +#ifdef __cplusplus +} +#endif +#endif +]) +]) + +AC_DEFUN([AC_CHECK_SETENV], +[ + KDE_CHECK_FUNC_EXT(setenv, [ +#include +], + [setenv("VAR", "VALUE", 1);], + [int setenv (const char *, const char *, int)], + [SETENV]) +]) + +AC_DEFUN([AC_CHECK_UNSETENV], +[ + KDE_CHECK_FUNC_EXT(unsetenv, [ +#include +], + [unsetenv("VAR");], + [void unsetenv (const char *)], + [UNSETENV]) +]) + +AC_DEFUN([AC_CHECK_GETDOMAINNAME], +[ + KDE_CHECK_FUNC_EXT(getdomainname, [ +#include +#include +#include +], + [ +char buffer[200]; +getdomainname(buffer, 200); +], + [#include + int getdomainname (char *, size_t)], + [GETDOMAINNAME]) +]) + +AC_DEFUN([AC_CHECK_GETHOSTNAME], +[ + KDE_CHECK_FUNC_EXT(gethostname, [ +#include +#include +], + [ +char buffer[200]; +gethostname(buffer, 200); +], + [int gethostname (char *, unsigned int)], + [GETHOSTNAME]) +]) + +AC_DEFUN([AC_CHECK_USLEEP], +[ + KDE_CHECK_FUNC_EXT(usleep, [ +#include +], + [ +usleep(200); +], + [int usleep (unsigned int)], + [USLEEP]) +]) + + +AC_DEFUN([AC_CHECK_RANDOM], +[ + KDE_CHECK_FUNC_EXT(random, [ +#include +], + [ +random(); +], + [long int random(void)], + [RANDOM]) + + KDE_CHECK_FUNC_EXT(srandom, [ +#include +], + [ +srandom(27); +], + [void srandom(unsigned int)], + [SRANDOM]) + +]) + +AC_DEFUN([AC_CHECK_INITGROUPS], +[ + KDE_CHECK_FUNC_EXT(initgroups, [ +#include +#include +#include +], + [ +char buffer[200]; +initgroups(buffer, 27); +], + [int initgroups(const char *, gid_t)], + [INITGROUPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMPS], +[ + KDE_CHECK_FUNC_EXT(mkstemps, [ +#include +#include +], + [ +mkstemps("/tmp/aaaXXXXXX", 6); +], + [int mkstemps(char *, int)], + [MKSTEMPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMP], +[ + KDE_CHECK_FUNC_EXT(mkstemp, [ +#include +#include +], + [ +mkstemp("/tmp/aaaXXXXXX"); +], + [int mkstemp(char *)], + [MKSTEMP]) +]) + +AC_DEFUN([AC_CHECK_MKDTEMP], +[ + KDE_CHECK_FUNC_EXT(mkdtemp, [ +#include +#include +], + [ +mkdtemp("/tmp/aaaXXXXXX"); +], + [char *mkdtemp(char *)], + [MKDTEMP]) +]) + + +AC_DEFUN([AC_CHECK_RES_INIT], +[ + AC_MSG_CHECKING([if res_init needs -lresolv]) + kde_libs_safe="$LIBS" + LIBS="$LIBS $X_EXTRA_LIBS -lresolv" + AC_TRY_LINK( + [ +#include +#include +#include +#include + ], + [ + res_init(); + ], + [ + LIBRESOLV="-lresolv" + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) + LIBS=$kde_libs_safe + AC_SUBST(LIBRESOLV) + + KDE_CHECK_FUNC_EXT(res_init, + [ +#include +#include +#include +#include + ], + [res_init()], + [int res_init(void)], + [RES_INIT]) +]) + +AC_DEFUN([AC_CHECK_STRLCPY], +[ + KDE_CHECK_FUNC_EXT(strlcpy, [ +#include +], +[ char buf[20]; + strlcpy(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcpy(char*, const char*, unsigned long)], + [STRLCPY]) +]) + +AC_DEFUN([AC_CHECK_STRLCAT], +[ + KDE_CHECK_FUNC_EXT(strlcat, [ +#include +], +[ char buf[20]; + buf[0]='\0'; + strlcat(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcat(char*, const char*, unsigned long)], + [STRLCAT]) +]) + +AC_DEFUN([AC_CHECK_RES_QUERY], +[ + KDE_CHECK_FUNC_EXT(res_query, [ +#include +#include +#include +#include +#include +], +[ +res_query(NULL, 0, 0, NULL, 0); +], + [int res_query(const char *, int, int, unsigned char *, int)], + [RES_QUERY]) +]) + +AC_DEFUN([AC_CHECK_DN_SKIPNAME], +[ + KDE_CHECK_FUNC_EXT(dn_skipname, [ +#include +#include +#include +#include +], +[ +dn_skipname (NULL, NULL); +], + [int dn_skipname (unsigned char *, unsigned char *)], + [DN_SKIPNAME]) +]) + + +AC_DEFUN([AC_FIND_GIF], + [AC_MSG_CHECKING([for giflib]) +AC_CACHE_VAL(ac_cv_lib_gif, +[ac_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" +else +LIBS="$all_libraries -lgif" +fi +AC_TRY_LINK(dnl +[ +#ifdef __cplusplus +extern "C" { +#endif +int GifLastError(void); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [return GifLastError();], + eval "ac_cv_lib_gif=yes", + eval "ac_cv_lib_gif=no") +LIBS="$ac_save_LIBS" +])dnl +if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) +else + AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) +fi +]) + +AC_DEFUN([KDE_FIND_JPEG_HELPER], +[ +AC_MSG_CHECKING([for libjpeg$2]) +AC_CACHE_VAL(ac_cv_lib_jpeg_$1, +[ +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" +ac_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[ +#ifdef __cplusplus +extern "C" { +#endif +void jpeg_CreateDecompress(); +#ifdef __cplusplus +} +#endif +], +[jpeg_CreateDecompress();], + eval "ac_cv_lib_jpeg_$1=-ljpeg$2", + eval "ac_cv_lib_jpeg_$1=no") +LIBS="$ac_save_LIBS" +CFLAGS="$ac_save_CFLAGS" +]) + +if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then + LIBJPEG="$ac_cv_lib_jpeg_$1" + AC_MSG_RESULT($ac_cv_lib_jpeg_$1) +else + AC_MSG_RESULT(no) + $3 +fi + +]) + +AC_DEFUN([AC_FIND_JPEG], +[ +dnl first look for libraries +KDE_FIND_JPEG_HELPER(6b, 6b, + KDE_FIND_JPEG_HELPER(normal, [], + [ + LIBJPEG= + ] + ) +) + +dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h +dnl requires system dependent includes loaded before it) +jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" +AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) +test "x$jpeg_incdir" = xNO && jpeg_incdir= + +dnl if headers _and_ libraries are missing, this is no error, and we +dnl continue with a warning (the user will get no jpeg support in khtml) +dnl if only one is missing, it means a configuration error, but we still +dnl only warn +if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then + AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) +else + if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then + AC_MSG_WARN([ +There is an installation error in jpeg support. You seem to have only one +of either the headers _or_ the libraries installed. You may need to either +provide correct --with-extra-... options, or the development package of +libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ +Disabling JPEG support. +]) + else + AC_MSG_WARN([libjpeg not found. disable JPEG support.]) + fi + jpeg_incdir= + LIBJPEG= +fi + +AC_SUBST(LIBJPEG) +AH_VERBATIM(_AC_CHECK_JPEG, +[/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif +]) +]) + +AC_DEFUN([KDE_CHECK_QT_JPEG], +[ +if test -n "$LIBJPEG"; then +AC_MSG_CHECKING([if Qt needs $LIBJPEG]) +AC_CACHE_VAL(kde_cv_qt_jpeg, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS $LIBQT" +LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` +ac_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[#include ], + [ + int argc; + char** argv; + QApplication app(argc, argv);], + eval "kde_cv_qt_jpeg=no", + eval "kde_cv_qt_jpeg=yes") +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +fi +]) + +if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then + AC_MSG_RESULT(yes) + LIBJPEG_QT='$(LIBJPEG)' +else + AC_MSG_RESULT(no) + LIBJPEG_QT= +fi + +]) + +AC_DEFUN([AC_FIND_ZLIB], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for libz]) +AC_CACHE_VAL(ac_cv_lib_z, +[ +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#include +], +[ + char buf[42]; + gzFile f = (gzFile) 0; + /* this would segfault.. but we only link, don't run */ + (void) gzgets(f, buf, sizeof(buf)); + + return (zlibVersion() == ZLIB_VERSION); +], + eval "ac_cv_lib_z='-lz'", + eval "ac_cv_lib_z=no") +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if test ! "$ac_cv_lib_z" = no; then + AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) + LIBZ="$ac_cv_lib_z" + AC_MSG_RESULT($ac_cv_lib_z) +else + AC_MSG_ERROR(not found. + Possibly configure picks up an outdated version + installed by XFree86. Remove it from your system. + + Check your installation and look into config.log) + LIBZ="" +fi +AC_SUBST(LIBZ) +]) + +AC_DEFUN([KDE_TRY_TIFFLIB], +[ +AC_MSG_CHECKING([for libtiff $1]) + +AC_CACHE_VAL(kde_cv_libtiff_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" +else +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" +fi +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl +[ +#include +], + [return (TIFFOpen( "", "r") == 0); ], +[ + kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" +], [ + kde_cv_libtiff_$1=no +]) + +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +]) + +if test "$kde_cv_libtiff_$1" = "no"; then + AC_MSG_RESULT(no) + LIBTIFF="" + $3 +else + LIBTIFF="$kde_cv_libtiff_$1" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) + $2 +fi + +]) + +AC_DEFUN([AC_FIND_TIFF], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +KDE_TRY_TIFFLIB(tiff, [], + KDE_TRY_TIFFLIB(tiff34)) + +AC_SUBST(LIBTIFF) +]) + +AC_DEFUN([KDE_FIND_LIBEXR], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_CACHE_VAL(ac_cv_libexr, +[ + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + AC_MSG_CHECKING([for OpenEXR libraries]) + + if test "$PKG_CONFIG" = "no" ; then + AC_MSG_RESULT(no) + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + if !(`$PKG_CONFIG --exists OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=no + else + if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=old + else + kde_save_LIBS="$LIBS" + LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_CXXFLAGS="$CXXFLAGS" + EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` + CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" + + AC_TRY_LINK(dnl + [ + #include + ], + [ + using namespace Imf; + RgbaInputFile file ("dummy"); + return 0; + ], + eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", + eval "ac_cv_libexr=no" + ) + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) + LIB_EXR="$ac_cv_libexr" + AC_MSG_RESULT($ac_cv_libexr) + else + AC_MSG_RESULT(no) + LIB_EXR="" + fi + fi + fi + fi + AC_SUBST(LIB_EXR) + AC_SUBST(EXR_FLAGS) +]) + + + +AC_DEFUN([AC_FIND_PNG], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_MSG_CHECKING([for libpng]) +AC_CACHE_VAL(ac_cv_lib_png, +[ +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" +else +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" +fi +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + png_structp png_ptr = png_create_read_struct( /* image ptr */ + PNG_LIBPNG_VER_STRING, 0, 0, 0 ); + return( png_ptr != 0 ); + ], + eval "ac_cv_lib_png='-lpng $LIBZ -lm'", + eval "ac_cv_lib_png=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) + LIBPNG="$ac_cv_lib_png" + AC_SUBST(LIBPNG) + AC_MSG_RESULT($ac_cv_lib_png) +else + AC_MSG_RESULT(no) + LIBPNG="" + AC_SUBST(LIBPNG) +fi +]) + + +AC_DEFUN([AC_FIND_JASPER], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_MSG_CHECKING([for jasper]) +AC_CACHE_VAL(ac_cv_jasper, +[ +kde_save_LIBS="$LIBS" +LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + return( jas_init() ); + ], + eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", + eval "ac_cv_jasper=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) + LIB_JASPER="$ac_cv_jasper" + AC_MSG_RESULT($ac_cv_jasper) +else + AC_MSG_RESULT(no) + LIB_JASPER="" +fi +AC_SUBST(LIB_JASPER) +]) + +AC_DEFUN([AC_CHECK_BOOL], +[ + AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) +]) + +AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], +[ +AC_MSG_CHECKING(if you need GNU extensions) +AC_CACHE_VAL(ac_cv_gnu_extensions, +[ +cat > conftest.c << EOF +#include + +#ifdef __GNU_LIBRARY__ +yes +#endif +EOF + +if (eval "$ac_cpp conftest.c") 2>&5 | + egrep "yes" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_gnu_extensions=yes +else + ac_cv_gnu_extensions=no +fi +]) + +AC_MSG_RESULT($ac_cv_gnu_extensions) +if test "$ac_cv_gnu_extensions" = "yes"; then + AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) +fi +]) + +AC_DEFUN([KDE_CHECK_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CXX supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) + CXXFLAGS="$save_CXXFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + +AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CC supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_C + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) + CFLAGS="$save_CFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + + +dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables +dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) +dnl it's all white-space separated +AC_DEFUN([AC_REMOVE_FORBIDDEN], +[ __val=$$1 + __forbid=" $2 " + if test -n "$__val"; then + __new="" + ac_save_IFS=$IFS + IFS=" " + for i in $__val; do + case "$__forbid" in + *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; + *) # Careful to not add spaces, where there were none, because otherwise + # libtool gets confused, if we change e.g. CXX + if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; + esac + done + IFS=$ac_save_IFS + $1=$__new + fi +]) + + +AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], +[ + AC_MSG_CHECKING([whether $CC is blacklisted]) + + dnl In theory we have tu run this test against $CC and $CXX + dnl in C and in C++ mode, because its perfectly legal for + dnl the user to mix compiler versions, since C has a defined + dnl ABI. + dnl + dnl For now, we assume the user is not on crack. + + AC_TRY_COMPILE([ +#ifdef __GNUC__ +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 +choke me +#endif +#endif +], , + kde_bad_compiler=no, + kde_bad_compiler=yes +) + + AC_MSG_RESULT($kde_bad_compiler) + +if test "$kde_bad_compiler" = "yes"; then + AC_MSG_ERROR([ + +This particular compiler version is blacklisted because it +is known to miscompile KDE. Please use a newer version, or +if that is not yet available, choose an older version. + +Please do not report a bug or bother us reporting this +configure error. We know about it, and we introduced +it by intention to avoid untraceable bugs or crashes in KDE. + +]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], +[ + AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], + kde_cv_opt_noinline_match, + [ + kde_cv_opt_noinline_match=irrelevant + dnl if we don't use both -O2 and -fno-inline, this check is moot + if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ + && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then + + ac_cflags_save="$CFLAGS" + CFLAGS="$CFLAGS -D_USE_GNU" + + AC_TRY_LINK([ + #include +], [ const char *pt, *et; + et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; +], + kde_cv_opt_noinline_match=yes, + kde_cv_opt_noinline_match=no + ) + + CFLAGS="$ac_cflags_save" + fi + ]) +]) + + +dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given +AC_DEFUN([AC_VALIDIFY_CXXFLAGS], +[dnl +if test "x$kde_use_qt_emb" != "xyes"; then + AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) +else + AC_REMOVE_FORBIDDEN(CXX, [-rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) +fi +]) + +AC_DEFUN([AC_CHECK_COMPILERS], +[ + AC_ARG_ENABLE(debug, + AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), + [ + case $enableval in + yes) + kde_use_debug_code="yes" + kde_use_debug_define=no + ;; + full) + kde_use_debug_code="full" + kde_use_debug_define=no + ;; + *) + kde_use_debug_code="no" + kde_use_debug_define=yes + ;; + esac + ], + [kde_use_debug_code="no" + kde_use_debug_define=no + ]) + + dnl Just for configure --help + AC_ARG_ENABLE(dummyoption, + AC_HELP_STRING([--disable-debug], + [disables debug output and debug symbols [default=no]]), + [],[]) + + AC_ARG_ENABLE(strict, + AC_HELP_STRING([--enable-strict], + [compiles with strict compiler options (may not work!)]), + [ + if test $enableval = "no"; then + kde_use_strict_options="no" + else + kde_use_strict_options="yes" + fi + ], [kde_use_strict_options="no"]) + + AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), + [ + if test $enableval = "no"; then + kde_use_warnings="no" + else + kde_use_warnings="yes" + fi + ], [kde_use_warnings="yes"]) + + dnl enable warnings for debug build + if test "$kde_use_debug_code" != "no"; then + kde_use_warnings=yes + fi + + AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), + [kde_use_profiling=$enableval], + [kde_use_profiling="no"] + ) + + dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS + CFLAGS=" $CFLAGS" + + AC_PROG_CC + + AC_PROG_CPP + + if test "$GCC" = "yes"; then + if test "$kde_use_debug_code" != "no"; then + if test $kde_use_debug_code = "full"; then + CFLAGS="-g3 -fno-inline $CFLAGS" + else + CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" + fi + else + CFLAGS="-O2 $CFLAGS" + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CFLAGS="-DNDEBUG $CFLAGS" + fi + + + case "$host" in + *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; + *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; + esac + + if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then + LDFLAGS="" + fi + + CXXFLAGS=" $CXXFLAGS" + + AC_PROG_CXX + + KDE_CHECK_FOR_BAD_COMPILER + + if test "$GXX" = "yes" || test "$CXX" = "KCC"; then + if test "$kde_use_debug_code" != "no"; then + if test "$CXX" = "KCC"; then + CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + else + if test "$kde_use_debug_code" = "full"; then + CXXFLAGS="-g3 -fno-inline $CXXFLAGS" + else + CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" + fi + fi + KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) + + dnl convenience compiler flags + KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) + AC_SUBST(WOVERLOADED_VIRTUAL) + else + if test "$CXX" = "KCC"; then + CXXFLAGS="+K3 $CXXFLAGS" + else + CXXFLAGS="-O2 $CXXFLAGS" + fi + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" + fi + + if test "$kde_use_profiling" = "yes"; then + KDE_CHECK_COMPILER_FLAG(pg, + [ + CFLAGS="-pg $CFLAGS" + CXXFLAGS="-pg $CXXFLAGS" + ]) + fi + + if test "$kde_use_warnings" = "yes"; then + if test "$GCC" = "yes"; then + CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" + case $host in + *-*-linux-gnu) + CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" + CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" + KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) + KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) + ;; + esac + KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) + dnl ### FIXME: revert for KDE 4 + KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) + fi + fi + + if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then + CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" + fi + + AC_ARG_ENABLE(pch, + AC_HELP_STRING([--enable-pch], + [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), + [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) + + HAVE_GCC_VISIBILITY=0 + AC_SUBST([HAVE_GCC_VISIBILITY]) + + if test "$GXX" = "yes"; then + gcc_no_reorder_blocks=NO + KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) + if test $kde_use_debug_code != "no" && \ + test $kde_use_debug_code != "full" && \ + test "YES" = "$gcc_no_reorder_blocks" ; then + CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" + CFLAGS="$CFLAGS -fno-reorder-blocks" + fi + KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) + KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) + KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) + KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) + ENABLE_PERMISSIVE_FLAG="-fpermissive" + + if test "$kde_use_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c header files) + echo >conftest.h + if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + if test "$kde_gcc_supports_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) + if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + fi + rm -f conftest.h conftest.h.gch + fi + + KDE_CHECK_FOR_OPT_NOINLINE_MATCH + if test "x$kde_cv_opt_noinline_match" = "xno" ; then + CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" + fi + fi + AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") + if test "$CXX" = "KCC"; then + dnl unfortunately we currently cannot disable exception support in KCC + dnl because doing so is binary incompatible and Qt by default links with exceptions :-( + dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) + dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) + + if test "$kde_use_pch" = "yes"; then + dnl TODO: support --pch-dir! + KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) + dnl the below works (but the dir must exist), but it's + dnl useless for a whole package. + dnl The are precompiled headers for each source file, so when compiling + dnl from scratch, it doesn't make a difference, and they take up + dnl around ~5Mb _per_ sourcefile. + dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, + dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) + fi + dnl this flag controls inlining. by default KCC inlines in optimisation mode + dnl all implementations that are defined inside the class {} declaration. + dnl because of templates-compatibility with broken gcc compilers, this + dnl can cause excessive inlining. This flag limits it to a sane level + KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) + KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) + KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) + KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) + dnl Some source files are shared between multiple executables + dnl (or libraries) and some of those need template instantiations. + dnl In that case KCC needs to compile those sources with + dnl --one_instantiation_per_object. To make it easy for us we compile + dnl _all_ objects with that flag (--one_per is a shorthand). + KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) + fi + AC_SUBST(USE_EXCEPTIONS) + dnl obsolete macro - provided to keep things going + USE_RTTI= + AC_SUBST(USE_RTTI) + + case "$host" in + *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; + *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; + *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; + *-*-solaris*) + if test "$GXX" = yes; then + libstdcpp=`$CXX -print-file-name=libstdc++.so` + if test ! -f $libstdcpp; then + AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) + fi + fi + ;; + esac + + AC_VALIDIFY_CXXFLAGS + + AC_PROG_CXXCPP + + if test "$GCC" = yes; then + NOOPT_CFLAGS=-O0 + fi + KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) + + AC_ARG_ENABLE(coverage, + AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ + if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="-lgcc" + elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="" + else + AC_MSG_ERROR([coverage with your compiler is not supported]) + fi + CFLAGS="$CFLAGS $ac_coverage_compiler" + CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" + LDFLAGS="$LDFLAGS $ac_coverage_linker" + ]) + + AC_SUBST(NOOPT_CXXFLAGS) + AC_SUBST(NOOPT_CFLAGS) + AC_SUBST(ENABLE_PERMISSIVE_FLAG) + + KDE_CHECK_NEW_LDFLAGS + KDE_CHECK_FINAL + KDE_CHECK_CLOSURE + KDE_CHECK_NMCHECK + + ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) +]) + +AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], + [ + AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" + LDFLAGS="$LDFLAGS -shared -fPIC" + + AC_TRY_LINK( + [ + /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ + #include + int some_function( void ) __attribute__ ((visibility("default"))); + int some_function( void ) + { + std::string s("blafasel"); + return 0; + } + ], [/* elvis is alive */], + kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_cv_val_gcc_visibility_bug = xno; then + CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" + fi + ] +) + +AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], +[ + AC_BEFORE([AC_PATH_QT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) + + AC_MSG_CHECKING([grepping for visibility push/pop in headers]) + + if test "x$GXX" = "xyes"; then + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_EGREP_CPP( + [GCC visibility push], + [ #include + ], + [ + AC_MSG_RESULT(yes) + kde_stdc_visibility_patched=yes ], + [ + AC_MSG_RESULT(no) + AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for + visibility support. Disabling -fvisibility=hidden]) + + kde_stdc_visibility_patched=no ]) + + AC_LANG_RESTORE + + kde_have_gcc_visibility=no + KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, + [ + kde_have_gcc_visibility=yes + dnl the whole toolchain is just a mess, gcc is just too buggy + dnl to handle STL with visibility enabled. Lets reconsider + dnl when gcc 4.2 is out or when things get fixed in the compiler. + dnl Contact mueller@kde.org for details. + AC_ARG_ENABLE(gcc-hidden-visibility, + AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), + [kde_have_gcc_visibility=$enableval], + [kde_have_gcc_visibility=no]) + + AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + CXXFLAGS="$CXXFLAGS $all_includes" + + AC_TRY_COMPILE( + [ +#include +#if Q_EXPORT - 0 != 0 +/* if this compiles, then Q_EXPORT is undefined */ +/* if Q_EXPORT is nonempty, this will break compilation */ +#endif + ], [/* elvis is alive */], + kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) + + CXXFLAGS=$safe_CXXFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then + CXXFLAGS="$CXXFLAGS -fvisibility=hidden" + KDE_CHECK_VISIBILITY_GCC_BUG + HAVE_GCC_VISIBILITY=1 + AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) + fi + ]) + fi +]) + +AC_DEFUN([KDE_ADD_DEPENDENCIES], +[ + [A]M_DEPENDENCIES(CC) + [A]M_DEPENDENCIES(CXX) +]) + +dnl just a wrapper to clean up configure.in +AC_DEFUN([KDE_PROG_LIBTOOL], +[ +AC_REQUIRE([AC_CHECK_COMPILERS]) +AC_REQUIRE([AC_ENABLE_SHARED]) +AC_REQUIRE([AC_ENABLE_STATIC]) + +AC_REQUIRE([AC_LIBTOOL_DLOPEN]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_OBJEXT +AC_EXEEXT + +AM_PROG_LIBTOOL +AC_LIBTOOL_CXX + +LIBTOOL_SHELL="/bin/sh ./libtool" +# LIBTOOL="$LIBTOOL --silent" +KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" +AC_SUBST(KDE_PLUGIN) + +# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. +KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" +AC_SUBST(KDE_CHECK_PLUGIN) + +# we patch configure quite some so we better keep that consistent for incremental runs +AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') +]) + +AC_DEFUN([KDE_CHECK_LIB64], +[ + AC_ARG_ENABLE(libsuffix, + AC_HELP_STRING([--enable-libsuffix], + [/lib directory suffix (64,32,none,auto[=default])]), + kdelibsuff=$enableval, kdelibsuff="auto") + + if test "$kdelibsuff" = "auto"; then + +cat > conftest.c << EOF +#include +int main() { + return 0; +} +EOF + kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ + s,.*/lib\([[^\/]]*\)/.*,\1, + p +}'` + rm -rf conftest.* + fi + + if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then + kdelibsuff= + fi + if test -z "$kdelibsuff"; then + AC_MSG_RESULT([not using lib directory suffix]) + AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) + else + if test "$libdir" = '${exec_prefix}/lib'; then + libdir="$libdir${kdelibsuff}" + AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms + fi + AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) + AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) + fi +]) + +AC_DEFUN([KDE_CHECK_TYPES], +[ AC_CHECK_SIZEOF(int, 4)dnl + AC_CHECK_SIZEOF(short)dnl + AC_CHECK_SIZEOF(long, 4)dnl + AC_CHECK_SIZEOF(char *, 4)dnl +])dnl + +dnl Not used - kept for compat only? +AC_DEFUN([KDE_DO_IT_ALL], +[ +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM +AM_INIT_AUTOMAKE($1, $2) +AM_DISABLE_LIBRARIES +AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) +AC_CHECK_COMPILERS +KDE_PROG_LIBTOOL +AM_KDE_WITH_NLS +AC_PATH_KDE +]) + +AC_DEFUN([AC_CHECK_RPATH], +[ +AC_MSG_CHECKING(for rpath) +AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), + USE_RPATH=$enableval, USE_RPATH=yes) + +if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then + + KDE_RPATH="-R \$(libdir)" + + if test "$kde_libraries" != "$libdir"; then + KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" + fi + + if test -n "$qt_libraries"; then + KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" + fi + dnl $x_libraries is set to /usr/lib in case + if test -n "$X_LDFLAGS"; then + X_RPATH="-R \$(x_libraries)" + KDE_RPATH="$KDE_RPATH $X_RPATH" + fi + if test -n "$KDE_EXTRA_RPATH"; then + KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" + fi +fi +AC_SUBST(KDE_EXTRA_RPATH) +AC_SUBST(KDE_RPATH) +AC_SUBST(X_RPATH) +AC_MSG_RESULT($USE_RPATH) +]) + +dnl Check for the type of the third argument of getsockname +AC_DEFUN([AC_CHECK_SOCKLEN_T], +[ + AC_MSG_CHECKING(for socklen_t) + AC_CACHE_VAL(kde_cv_socklen_t, + [ + AC_LANG_PUSH(C++) + kde_cv_socklen_t=no + AC_TRY_COMPILE([ + #include + #include + ], + [ + socklen_t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t=yes + kde_cv_socklen_t_equiv=socklen_t + ]) + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t) + if test $kde_cv_socklen_t = no; then + AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) + AC_CACHE_VAL(kde_cv_socklen_t_equiv, + [ + kde_cv_socklen_t_equiv=int + AC_LANG_PUSH(C++) + for t in int size_t unsigned long "unsigned long"; do + AC_TRY_COMPILE([ + #include + #include + ], + [ + $t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t_equiv="$t" + break + ]) + done + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t_equiv) + fi + AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined]) + AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) +]) + +dnl This is a merge of some macros out of the gettext aclocal.m4 +dnl since we don't need anything, I took the things we need +dnl the copyright for them is: +dnl > +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. +dnl > +dnl for this file it is relicensed under LGPL + +AC_DEFUN([AM_KDE_WITH_NLS], + [ + dnl If we use NLS figure out what method + + AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, + [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then + AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + MSGFMT=$GMSGFMT + AC_SUBST(GMSGFMT) + AC_SUBST(MSGFMT) + + AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext programs is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + AC_SUBST(XGETTEXT) + + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper , 1996. + +# serial 1 +# Stephan Kulow: I appended a _KDE against name conflicts + +dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + + +# Check whether LC_MESSAGES is available in . +# Ulrich Drepper , 1995. + +# serial 1 + +AC_DEFUN([AM_LC_MESSAGES], + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) + fi + fi]) + +dnl From Jim Meyering. +dnl FIXME: migrate into libit. + +AC_DEFUN([AM_FUNC_OBSTACK], +[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, + [AC_TRY_LINK([#include "obstack.h"], + [struct obstack *mem;obstack_free(mem,(char *) 0)], + am_cv_func_obstack=yes, + am_cv_func_obstack=no)]) + if test $am_cv_func_obstack = yes; then + AC_DEFINE(HAVE_OBSTACK) + else + LIBOBJS="$LIBOBJS obstack.o" + fi +]) + +dnl From Jim Meyering. Use this if you use the GNU error.[ch]. +dnl FIXME: Migrate into libit + +AC_DEFUN([AM_FUNC_ERROR_AT_LINE], +[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, + [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], + am_cv_lib_error_at_line=yes, + am_cv_lib_error_at_line=no)]) + if test $am_cv_lib_error_at_line = no; then + LIBOBJS="$LIBOBJS error.o" + fi + AC_SUBST(LIBOBJS)dnl +]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper , 1995. + +# serial 1 +# Stephan Kulow: I put a KDE in it to avoid name conflicts + +AC_DEFUN([AM_KDE_GNU_GETTEXT], + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([AM_KDE_WITH_NLS])dnl + AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next]) + + AC_MSG_CHECKING(for stpcpy) + AC_CACHE_VAL(kde_cv_func_stpcpy, + [ + kde_safe_cxxflags=$CXXFLAGS + CXXFLAGS="-Werror" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ + #include + ], + [ + char buffer[200]; + stpcpy(buffer, buffer); + ], + kde_cv_func_stpcpy=yes, + kde_cv_func_stpcpy=no) + AC_LANG_RESTORE + CXXFLAGS=$kde_safe_cxxflags + ]) + AC_MSG_RESULT($kde_cv_func_stpcpy) + if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then + AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) + fi + + AM_LC_MESSAGES + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + ]) + +AC_DEFUN([AC_HAVE_XPM], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= + test -z "$XPM_INCLUDE" && XPM_INCLUDE= + + AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), + xpm_test=$withval, xpm_test="yes") + if test "x$xpm_test" = xno; then + ac_cv_have_xpm=no + else + AC_MSG_CHECKING(for XPM) + AC_CACHE_VAL(ac_cv_have_xpm, + [ + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" + else + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" + fi + CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" + test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" + AC_TRY_LINK([#include ],[], + ac_cv_have_xpm="yes",ac_cv_have_xpm="no") + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + ])dnl + + if test "$ac_cv_have_xpm" = no; then + AC_MSG_RESULT(no) + XPM_LDFLAGS="" + XPMINC="" + $2 + else + AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) + if test "$XPM_LDFLAGS" = ""; then + XPMLIB='-lXpm $(LIB_X11)' + else + XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' + fi + if test "$XPM_INCLUDE" = ""; then + XPMINC="" + else + XPMINC="-I$XPM_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + AC_SUBST(XPMINC) + AC_SUBST(XPMLIB) +]) + +AC_DEFUN([AC_HAVE_DPMS], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= + test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= + DPMS_LIB= + + AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), + dpms_test=$withval, dpms_test="yes") + if test "x$dpms_test" = xno; then + ac_cv_have_dpms=no + else + AC_MSG_CHECKING(for DPMS) + dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. + dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". + AC_CACHE_VAL(ac_cv_have_dpms, + [ + if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then + AC_MSG_RESULT(no) + ac_cv_have_dpms="no" + else + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + ac_save_libs="$LIBS" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" + LIBS="-lX11 -lXext $LIBSOCKET" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + ac_cv_have_dpms="yes", [ + LIBS="-lXdpms $LIBS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + [ + ac_cv_have_dpms="-lXdpms" + ],ac_cv_have_dpms="no") + ]) + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LIBS="$ac_save_libs" + fi + ])dnl + + if test "$ac_cv_have_dpms" = no; then + AC_MSG_RESULT(no) + DPMS_LDFLAGS="" + DPMSINC="" + $2 + else + AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) + if test "$ac_cv_have_dpms" = "-lXdpms"; then + DPMS_LIB="-lXdpms" + fi + if test "$DPMS_LDFLAGS" = ""; then + DPMSLIB="$DPMS_LIB "'$(LIB_X11)' + else + DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' + fi + if test "$DPMS_INCLUDE" = ""; then + DPMSINC="" + else + DPMSINC="-I$DPMS_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + ac_save_cflags="$CFLAGS" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, + [Define if you have the DPMSCapable prototype in ]) + AC_CHECK_DECL(DPMSCapable, + AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, + [#include + #include ]) + AH_TEMPLATE(HAVE_DPMSINFO_PROTO, + [Define if you have the DPMSInfo prototype in ]) + AC_CHECK_DECL(DPMSInfo, + AC_DEFINE(HAVE_DPMSINFO_PROTO),, + [#include + #include ]) + CFLAGS="$ac_save_cflags" + AC_SUBST(DPMSINC) + AC_SUBST(DPMSLIB) +]) + +AC_DEFUN([AC_HAVE_GL], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$GL_LDFLAGS" && GL_LDFLAGS= + test -z "$GL_INCLUDE" && GL_INCLUDE= + + AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), + gl_test=$withval, gl_test="yes") + if test "x$kde_use_qt_emb" = "xyes"; then + # GL and Qt Embedded is a no-go for now. + ac_cv_have_gl=no + elif test "x$gl_test" = xno; then + ac_cv_have_gl=no + else + AC_MSG_CHECKING(for GL) + AC_CACHE_VAL(ac_cv_have_gl, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_ldflags=$LDFLAGS + ac_save_cxxflags=$CXXFLAGS + ac_save_libs=$LIBS + LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" + LIBS="$LIBS -lGL -lGLU" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" + LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$CFLAGS $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include +#include +], [], + ac_cv_have_gl="yes", ac_cv_have_gl="no") + AC_LANG_RESTORE + LDFLAGS=$ac_save_ldflags + CXXFLAGS=$ac_save_cxxflags + LIBS=$ac_save_libs + ])dnl + + if test "$ac_cv_have_gl" = "no"; then + AC_MSG_RESULT(no) + GL_LDFLAGS="" + GLINC="" + $2 + else + AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) + if test "$GL_LDFLAGS" = ""; then + GLLIB='-lGLU -lGL $(LIB_X11)' + else + GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' + fi + if test "$GL_INCLUDE" = ""; then + GLINC="" + else + GLINC="-I$GL_INCLUDE" + fi + AC_MSG_RESULT($ac_cv_have_gl) + $1 + fi + fi + AC_SUBST(GLINC) + AC_SUBST(GLLIB) +]) + + + dnl shadow password and PAM magic - maintained by ossi@kde.org + +AC_DEFUN([KDE_PAM], [ + AC_REQUIRE([KDE_CHECK_LIBDL]) + + want_pam= + AC_ARG_WITH(pam, + AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), + [ if test "x$withval" = "xyes"; then + want_pam=yes + pam_service=kde + elif test "x$withval" = "xno"; then + want_pam=no + else + want_pam=yes + pam_service=$withval + fi + ], [ pam_service=kde ]) + + use_pam= + PAMLIBS= + if test "x$want_pam" != xno; then + AC_CHECK_LIB(pam, pam_start, [ + AC_CHECK_HEADER(security/pam_appl.h, + [ pam_header=security/pam_appl.h ], + [ AC_CHECK_HEADER(pam/pam_appl.h, + [ pam_header=pam/pam_appl.h ], + [ + AC_MSG_WARN([PAM detected, but no headers found! +Make sure you have the necessary development packages installed.]) + ] + ) + ] + ) + ], , $LIBDL) + if test -z "$pam_header"; then + if test "x$want_pam" = xyes; then + AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) + fi + else + AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) + PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" + use_pam=yes + + dnl darwin claims to be something special + if test "$pam_header" = "pam/pam_appl.h"; then + AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) + fi + + dnl test whether struct pam_message is const (Linux) or not (Sun) + AC_MSG_CHECKING(for const pam_message) + AC_EGREP_HEADER([struct pam_message], $pam_header, + [ AC_EGREP_HEADER([const struct pam_message], $pam_header, + [AC_MSG_RESULT([const: Linux-type PAM])], + [AC_MSG_RESULT([nonconst: Sun-type PAM]) + AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] + )], + [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) + fi + fi + + AC_SUBST(PAMLIBS) +]) + +dnl DEF_PAM_SERVICE(arg name, full name, define name) +AC_DEFUN([DEF_PAM_SERVICE], [ + AC_ARG_WITH($1-pam, + AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE=$withval + else + AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. +You may want to enforce it by using --with-pam.]) + fi + ], + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE="$pam_service" + fi + ]) + if test -n "$$3_PAM_SERVICE"; then + AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) + AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) + fi + AC_SUBST($3_PAM_SERVICE) +]) + +AC_DEFUN([KDE_SHADOWPASSWD], [ + AC_REQUIRE([KDE_PAM]) + + AC_CHECK_LIB(shadow, getspent, + [ LIBSHADOW="-lshadow" + ac_use_shadow=yes + ], + [ dnl for UnixWare + AC_CHECK_LIB(gen, getspent, + [ LIBGEN="-lgen" + ac_use_shadow=yes + ], + [ AC_CHECK_FUNC(getspent, + [ ac_use_shadow=yes ], + [ ac_use_shadow=no ]) + ]) + ]) + AC_SUBST(LIBSHADOW) + AC_SUBST(LIBGEN) + + AC_MSG_CHECKING([for shadow passwords]) + + AC_ARG_WITH(shadow, + AC_HELP_STRING([--with-shadow],[If you want shadow password support]), + [ if test "x$withval" != "xno"; then + use_shadow=yes + else + use_shadow=no + fi + ], [ + use_shadow="$ac_use_shadow" + ]) + + if test "x$use_shadow" = xyes; then + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) + else + AC_MSG_RESULT(no) + LIBSHADOW= + LIBGEN= + fi + + dnl finally make the relevant binaries setuid root, if we have shadow passwds. + dnl this still applies, if we could use it indirectly through pam. + if test "x$use_shadow" = xyes || + ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then + case $host in + *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) + SETUIDFLAGS="-m 4755 -o root";; + *) + SETUIDFLAGS="-m 4755";; + esac + fi + AC_SUBST(SETUIDFLAGS) + +]) + +AC_DEFUN([KDE_PASSWDLIBS], [ + AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT + AC_REQUIRE([KDE_PAM]) + AC_REQUIRE([KDE_SHADOWPASSWD]) + + if test "x$use_pam" = "xyes"; then + PASSWDLIBS="$PAMLIBS" + else + PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" + fi + + dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but + dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires + dnl root to read, so kcheckpass needs to be root (even when using pam, since pam + dnl may need to read /etc/master.passwd). + case $host in + *-*-freebsd*) + SETUIDFLAGS="-m 4755 -o root" + ;; + *) + ;; + esac + + AC_SUBST(PASSWDLIBS) +]) + +AC_DEFUN([KDE_CHECK_LIBDL], +[ +AC_CHECK_LIB(dl, dlopen, [ +LIBDL="-ldl" +ac_cv_have_dlfcn=yes +]) + +AC_CHECK_LIB(dld, shl_unload, [ +LIBDL="-ldld" +ac_cv_have_shload=yes +]) + +AC_SUBST(LIBDL) +]) + +AC_DEFUN([KDE_CHECK_DLOPEN], +[ +KDE_CHECK_LIBDL +AC_CHECK_HEADERS(dlfcn.h dl.h) +if test "$ac_cv_header_dlfcn_h" = "no"; then + ac_cv_have_dlfcn=no +fi + +if test "$ac_cv_header_dl_h" = "no"; then + ac_cv_have_shload=no +fi + +dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE +dnl (MM) +AC_ARG_ENABLE(dlopen, +AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), +enable_dlopen=$enableval, +enable_dlopen=yes) + +# override the user's opinion, if we know it better ;) +if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then + enable_dlopen=no +fi + +if test "$ac_cv_have_dlfcn" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) +fi + +if test "$ac_cv_have_shload" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) +fi + +if test "$enable_dlopen" = no ; then + test -n "$1" && eval $1 +else + test -n "$2" && eval $2 +fi + +]) + +AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], +[ +KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) +KDE_PROG_LIBTOOL +AC_MSG_CHECKING([dynamic loading]) +eval "`egrep '^build_libtool_libs=' libtool`" +if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then + dynamic_loading=yes + AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) +else + dynamic_loading=no +fi +AC_MSG_RESULT($dynamic_loading) +if test "$dynamic_loading" = "yes"; then + $1 +else + $2 +fi +]) + +AC_DEFUN([KDE_ADD_INCLUDES], +[ +if test -z "$1"; then + test_include="Pix.h" +else + test_include="$1" +fi + +AC_MSG_CHECKING([for libg++ ($test_include)]) + +AC_CACHE_VAL(kde_cv_libgpp_includes, +[ +kde_cv_libgpp_includes=no + + for ac_dir in \ + \ + /usr/include/g++ \ + /usr/include \ + /usr/unsupported/include \ + /opt/include \ + $extra_include \ + ; \ + do + if test -r "$ac_dir/$test_include"; then + kde_cv_libgpp_includes=$ac_dir + break + fi + done +]) + +AC_MSG_RESULT($kde_cv_libgpp_includes) +if test "$kde_cv_libgpp_includes" != "no"; then + all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" +fi +]) +]) + +AC_DEFUN([KDE_CHECK_LIBPTHREAD], +[ + dnl This code is here specifically to handle the + dnl various flavors of threading library on FreeBSD + dnl 4-, 5-, and 6-, and the (weird) rules around it. + dnl There may be an environment PTHREAD_LIBS that + dnl specifies what to use; otherwise, search for it. + dnl -pthread is special cased and unsets LIBPTHREAD + dnl below if found. + LIBPTHREAD="" + + if test -n "$PTHREAD_LIBS"; then + if test "x$PTHREAD_LIBS" = "x-pthread" ; then + LIBPTHREAD="PTHREAD" + else + PTHREAD_LIBS_save="$PTHREAD_LIBS" + PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` + AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) + KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ + LIBPTHREAD="$PTHREAD_LIBS_save"]) + PTHREAD_LIBS="$PTHREAD_LIBS_save" + fi + fi + + dnl Is this test really needed, in the face of the Tru64 test below? + if test -z "$LIBPTHREAD"; then + AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) + fi + + dnl This is a special Tru64 check, see BR 76171 issue #18. + if test -z "$LIBPTHREAD" ; then + AC_MSG_CHECKING([for pthread_create in -lpthread]) + kde_safe_libs=$LIBS + LIBS="$LIBS -lpthread" + AC_TRY_LINK([#include ],[(void)pthread_create(0,0,0,0);],[ + AC_MSG_RESULT(yes) + LIBPTHREAD="-lpthread"],[ + AC_MSG_RESULT(no)]) + LIBS=$kde_safe_libs + fi + + dnl Un-special-case for FreeBSD. + if test "x$LIBPTHREAD" = "xPTHREAD" ; then + LIBPTHREAD="" + fi + + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], +[ + USE_THREADS="" + if test -z "$LIBPTHREAD"; then + KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) + fi + + AH_VERBATIM(__svr_define, [ +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif +]) + case $host_os in + solaris*) + KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) + CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" + ;; + freebsd*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" + ;; + aix*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" + LIBPTHREAD="$LIBPTHREAD -lc_r" + ;; + linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" + if test "$CXX" = "KCC"; then + CXXFLAGS="$CXXFLAGS --thread_safe" + NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" + fi + ;; + *) + ;; + esac + AC_SUBST(USE_THREADS) + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_THREADING], +[ + AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) + AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) + dnl default is yes if libpthread is found and no if no libpthread is available + if test -z "$LIBPTHREAD"; then + if test -z "$USE_THREADS"; then + kde_check_threading_default=no + else + kde_check_threading_default=yes + fi + else + kde_check_threading_default=yes + fi + AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), + kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) + if test "x$kde_use_threading" = "xyes"; then + AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) + fi +]) + +AC_DEFUN([KDE_TRY_LINK_PYTHON], +[ +if test "$kde_python_link_found" = no; then + +if test "$1" = normal; then + AC_MSG_CHECKING(if a Python application links) +else + AC_MSG_CHECKING(if Python depends on $2) +fi + +AC_CACHE_VAL(kde_cv_try_link_python_$1, +[ +kde_save_cflags="$CFLAGS" +CFLAGS="$CFLAGS $PYTHONINC" +kde_save_libs="$LIBS" +LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" +kde_save_ldflags="$LDFLAGS" +LDFLAGS="$LDFLAGS $PYTHONLIB" + +AC_TRY_LINK( +[ +#include +],[ + PySys_SetArgv(1, 0); +], + [kde_cv_try_link_python_$1=yes], + [kde_cv_try_link_python_$1=no] +) +CFLAGS="$kde_save_cflags" +LIBS="$kde_save_libs" +LDFLAGS="$kde_save_ldflags" +]) + +if test "$kde_cv_try_link_python_$1" = "yes"; then + AC_MSG_RESULT(yes) + kde_python_link_found=yes + if test ! "$1" = normal; then + LIBPYTHON="$LIBPYTHON $2" + fi + $3 +else + AC_MSG_RESULT(no) + $4 +fi + +fi + +]) + +AC_DEFUN([KDE_CHECK_PYTHON_DIR], +[ +AC_MSG_CHECKING([for Python directory]) + +AC_CACHE_VAL(kde_cv_pythondir, +[ + if test -z "$PYTHONDIR"; then + kde_cv_pythondir=/usr/local + else + kde_cv_pythondir="$PYTHONDIR" + fi +]) + +AC_ARG_WITH(pythondir, +AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), +[ + ac_python_dir=$withval +], ac_python_dir=$kde_cv_pythondir +) + +AC_MSG_RESULT($ac_python_dir) +]) + +AC_DEFUN([KDE_CHECK_PYTHON_INTERN], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) +AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) + +if test -z "$1"; then + version="1.5" +else + version="$1" +fi + +AC_MSG_CHECKING([for Python$version]) + +python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" +AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) +if test ! -r $python_incdir/Python.h; then + AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) + python_incdir=$python_incdir/python$version + if test ! -r $python_incdir/Python.h; then + python_incdir=no + fi +fi + +PYTHONINC=-I$python_incdir + +python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" +AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) +if test ! -r $python_libdir/libpython$version.so; then + AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) + if test ! -r $python_libdir/libpython$version.a; then + AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) + python_libdir=$python_libdir/python$version/config + if test ! -r $python_libdir/libpython$version.a; then + python_libdir=no + fi + fi +fi + +PYTHONLIB=-L$python_libdir +kde_orig_LIBPYTHON=$LIBPYTHON +if test -z "$LIBPYTHON"; then + LIBPYTHON=-lpython$version +fi + +AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) +python_moddir=$python_moddir/python$version +if test ! -r $python_moddir/copy.py; then + python_moddir=no +fi + +PYTHONMODDIR=$python_moddir + +AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) + +if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then + LIBPYTHON=$kde_orig_LIBPYTHON + test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" + test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" + $2 +else + dnl Note: this test is very weak + kde_python_link_found=no + KDE_TRY_LINK_PYTHON(normal) + KDE_TRY_LINK_PYTHON(m, -lm) + KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) + KDE_TRY_LINK_PYTHON(tcl, -ltcl) + KDE_TRY_LINK_PYTHON(db2, -ldb2) + KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) + KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], + [AC_MSG_WARN([it seems, Python depends on another library. + Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this + and contact the authors to let them know about this problem]) + ]) + + LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" + AC_SUBST(PYTHONINC) + AC_SUBST(PYTHONLIB) + AC_SUBST(LIBPYTHON) + AC_SUBST(PYTHONMODDIR) + AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_PYTHON], +[ + KDE_CHECK_PYTHON_INTERN("2.5", + [KDE_CHECK_PYTHON_INTERN("2.4", + [KDE_CHECK_PYTHON_INTERN("2.3", + [KDE_CHECK_PYTHON_INTERN("2.2", + [KDE_CHECK_PYTHON_INTERN("2.1", + [KDE_CHECK_PYTHON_INTERN("2.0", + [KDE_CHECK_PYTHON_INTERN($1, $2) ]) + ]) + ]) + ]) + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_STL], +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" + + AC_MSG_CHECKING([if C++ programs can be compiled]) + AC_CACHE_VAL(kde_cv_stl_works, + [ + AC_TRY_COMPILE([ +#include +using namespace std; +],[ + string astring="Hallo Welt."; + astring.erase(0, 6); // now astring is "Welt" + return 0; +], kde_cv_stl_works=yes, + kde_cv_stl_works=no) +]) + + AC_MSG_RESULT($kde_cv_stl_works) + + if test "$kde_cv_stl_works" = "yes"; then + # back compatible + AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) + else + AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. +Check config.log for details - if you're using a Linux distribution you might miss +a package named similar to libstdc++-dev.]) + fi + + CXXFLAGS="$ac_save_CXXFLAGS" + AC_LANG_RESTORE +]) + +AC_DEFUN([AC_FIND_QIMGIO], + [AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for qimgio]) +AC_CACHE_VAL(ac_cv_lib_qimgio, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +ac_save_CXXFLAGS="$CXXFLAGS" +LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +AC_TRY_RUN(dnl +[ +#include +#include +int main() { + QString t = "hallo"; + t.fill('t'); + qInitImageIO(); +} +], + ac_cv_lib_qimgio=yes, + ac_cv_lib_qimgio=no, + ac_cv_lib_qimgio=no) +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then + LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) + AC_SUBST(LIBQIMGIO) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN([AM_DISABLE_LIBRARIES], +[ + AC_PROVIDE([AM_ENABLE_STATIC]) + AC_PROVIDE([AM_ENABLE_SHARED]) + enable_static=no + enable_shared=yes +]) + + +AC_DEFUN([AC_CHECK_UTMP_FILE], +[ + AC_MSG_CHECKING([for utmp file]) + + AC_CACHE_VAL(kde_cv_utmp_file, + [ + kde_cv_utmp_file=no + + for ac_file in \ + \ + /var/run/utmp \ + /var/adm/utmp \ + /etc/utmp \ + ; \ + do + if test -r "$ac_file"; then + kde_cv_utmp_file=$ac_file + break + fi + done + ]) + + if test "$kde_cv_utmp_file" != "no"; then + AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) + $1 + AC_MSG_RESULT($kde_cv_utmp_file) + else + $2 + AC_MSG_RESULT([non found]) + fi +]) + + +AC_DEFUN([KDE_CREATE_SUBDIRSLIST], +[ + +DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" +TOPSUBDIRS="" + +if test ! -s $srcdir/subdirs; then + dnl Note: Makefile.common creates subdirs, so this is just a fallback + files=`cd $srcdir && ls -1` + dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` + for i in $dirs; do + echo $i >> $srcdir/subdirs + done +fi + +ac_topsubdirs= +if test -s $srcdir/inst-apps; then + ac_topsubdirs="`cat $srcdir/inst-apps`" +elif test -s $srcdir/subdirs; then + ac_topsubdirs="`cat $srcdir/subdirs`" +fi + +for i in $ac_topsubdirs; do + AC_MSG_CHECKING([if $i should be compiled]) + if test -d $srcdir/$i; then + install_it="yes" + for j in $DO_NOT_COMPILE; do + if test $i = $j; then + install_it="no" + fi + done + else + install_it="no" + fi + AC_MSG_RESULT($install_it) + vari=`echo $i | sed -e 's,[[-+.@]],_,g'` + if test $install_it = "yes"; then + TOPSUBDIRS="$TOPSUBDIRS $i" + eval "$vari""_SUBDIR_included=yes" + else + eval "$vari""_SUBDIR_included=no" + fi +done + +AC_SUBST(TOPSUBDIRS) +]) + +AC_DEFUN([KDE_CHECK_NAMESPACES], +[ +AC_MSG_CHECKING(whether C++ compiler supports namespaces) +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +AC_TRY_COMPILE([ +], +[ +namespace Foo { + extern int i; + namespace Bar { + extern int i; + } +} + +int Foo::i = 0; +int Foo::Bar::i = 1; +],[ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_NAMESPACES) +], [ +AC_MSG_RESULT(no) +]) +AC_LANG_RESTORE +]) + +dnl ------------------------------------------------------------------------ +dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_S_ISSOCK], +[ +AC_MSG_CHECKING(for S_ISSOCK) +AC_CACHE_VAL(ac_cv_have_s_issock, +[ +AC_TRY_LINK( +[ +#include +], +[ +struct stat buff; +int b = S_ISSOCK( buff.st_mode ); +], +ac_cv_have_s_issock=yes, +ac_cv_have_s_issock=no) +]) +AC_MSG_RESULT($ac_cv_have_s_issock) +if test "$ac_cv_have_s_issock" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) +fi + +AH_VERBATIM(_ISSOCK, +[ +#ifndef HAVE_S_ISSOCK +#define HAVE_S_ISSOCK +#define S_ISSOCK(mode) (1==0) +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], +[ +AC_MSG_CHECKING(for MAXPATHLEN) +AC_CACHE_VAL(ac_cv_maxpathlen, +[ +cat > conftest.$ac_ext < +#endif +#include +#include +#ifndef MAXPATHLEN +#define MAXPATHLEN 1024 +#endif + +KDE_HELLO MAXPATHLEN + +EOF + +ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" + +if AC_TRY_EVAL(ac_try) && test -s conftest.out; then + ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` +else + ac_cv_maxpathlen=1024 +fi + +rm conftest.* + +]) +AC_MSG_RESULT($ac_cv_maxpathlen) +AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) +]) + +AC_DEFUN([KDE_CHECK_HEADER], +[ + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_CHECK_HEADER([$1], [$2], [$3], [$4]) + AC_LANG_RESTORE + CPPFLAGS=$kde_safe_cppflags +]) + +AC_DEFUN([KDE_CHECK_HEADERS], +[ + AH_CHECK_HEADERS([$1]) + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_FAST_CONFIGURE], +[ + dnl makes configure fast (needs perl) + AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), + with_fast_perl=$enableval, with_fast_perl=yes) +]) + +AC_DEFUN([KDE_CONF_FILES], +[ + val= + if test -f $srcdir/configure.files ; then + val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` + fi + CONF_FILES= + if test -n "$val" ; then + for i in $val ; do + CONF_FILES="$CONF_FILES $i" + done + fi + AC_SUBST(CONF_FILES) +])dnl + +dnl This sets the prefix, for arts and kdelibs +dnl Do NOT use in any other module. +dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde +AC_DEFUN([KDE_SET_PREFIX_CORE], +[ + unset CDPATH + dnl make $KDEDIR the default for the installation + AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) + + if test "x$prefix" = "xNONE"; then + prefix=$ac_default_prefix + ac_configure_args="$ac_configure_args --prefix=$prefix" + fi + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + kde_libs_prefix='$(prefix)' + kde_libs_htmldir='$(kde_htmldir)' + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + + +AC_DEFUN([KDE_SET_PREFIX], +[ + unset CDPATH + dnl We can't give real code to that macro, only a value. + dnl It only matters for --help, since we set the prefix in this function anyway. + AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) + + KDE_SET_DEFAULT_BINDIRS + if test "x$prefix" = "xNONE"; then + dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + else + dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH + kde_save_PATH="$PATH" + PATH="$exec_prefix/bin:$prefix/bin:$PATH" + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + PATH="$kde_save_PATH" + fi + + kde_libs_prefix=`$KDECONFIG --prefix` + if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then + AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. + This means it has been moved since you installed it. + This won't work. Please recompile kdelibs for the new prefix. + ]) + fi + kde_libs_htmldir=`$KDECONFIG --install html --expandvars` + + AC_MSG_CHECKING([where to install]) + if test "x$prefix" = "xNONE"; then + prefix=$kde_libs_prefix + AC_MSG_RESULT([$prefix (as returned by kde-config)]) + else + dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different + given_prefix=$prefix + AC_MSG_RESULT([$prefix (as requested)]) + fi + + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + AC_SUBST(KDECONFIG) + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + +pushdef([AC_PROG_INSTALL], +[ + dnl our own version, testing for a -p flag + popdef([AC_PROG_INSTALL]) + dnl as AC_PROG_INSTALL works as it works we first have + dnl to save if the user didn't specify INSTALL, as the + dnl autoconf one overwrites INSTALL and we have no chance to find + dnl out afterwards + test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL + test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM + test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT + AC_PROG_INSTALL + + if test -z "$kde_save_INSTALL_given" ; then + # OK, user hasn't given any INSTALL, autoconf found one for us + # now we test, if it supports the -p flag + AC_MSG_CHECKING(for -p flag to install) + rm -f confinst.$$.* > /dev/null 2>&1 + echo "Testtest" > confinst.$$.orig + ac_res=no + if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then + if test -f confinst.$$.new ; then + # OK, -p seems to do no harm to install + INSTALL="${INSTALL} -p" + ac_res=yes + fi + fi + rm -f confinst.$$.* + AC_MSG_RESULT($ac_res) + fi + dnl the following tries to resolve some signs and wonders coming up + dnl with different autoconf/automake versions + dnl e.g.: + dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s + dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) + dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s + dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has + dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the + dnl install-@DIR@PROGRAMS targets to explicitly use that flag + dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as + dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 + dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure + dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from + dnl automake (due to broken Makefile.am or whatever) to install programs, + dnl and so does not see the -s flag in automake > 1.4 + dnl to clean up that mess we: + dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG + dnl which cleans KDE's program with automake > 1.4; + dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems + dnl with automake<=1.4 + dnl note that dues to this sometimes two '-s' flags are used (if KDE + dnl properly uses install-@DIR@PROGRAMS, but I don't care + dnl + dnl And to all this comes, that I even can't write in comments variable + dnl names used by automake, because it is so stupid to think I wanted to + dnl _use_ them, therefor I have written A_M_... instead of AM_ + dnl hmm, I wanted to say something ... ahh yes: Arghhh. + + if test -z "$kde_save_INSTALL_PROGRAM_given" ; then + INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' + fi + if test -z "$kde_save_INSTALL_SCRIPT_given" ; then + INSTALL_SCRIPT='${INSTALL}' + fi +])dnl + +AC_DEFUN([KDE_LANG_CPLUSPLUS], +[AC_LANG_CPLUSPLUS +ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' +pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) +]) + +pushdef([AC_LANG_CPLUSPLUS], +[popdef([AC_LANG_CPLUSPLUS]) +KDE_LANG_CPLUSPLUS +]) + +AC_DEFUN([KDE_CHECK_LONG_LONG], +[ +AC_MSG_CHECKING(for long long) +AC_CACHE_VAL(kde_cv_c_long_long, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_LINK([], [ + long long foo = 0; + foo = foo+1; + ], + kde_cv_c_long_long=yes, kde_cv_c_long_long=no) + AC_LANG_RESTORE +]) +AC_MSG_RESULT($kde_cv_c_long_long) +if test "$kde_cv_c_long_long" = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) +fi +]) + +AC_DEFUN([KDE_CHECK_LIB], +[ + kde_save_LDFLAGS="$LDFLAGS" + dnl AC_CHECK_LIB modifies LIBS, so save it here + kde_save_LIBS="$LIBS" + LDFLAGS="$LDFLAGS $all_libraries" + case $host_os in + aix*) LDFLAGS="-brtl $LDFLAGS" + test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" + ;; + esac + AC_CHECK_LIB($1, $2, $3, $4, $5) + LDFLAGS="$kde_save_LDFLAGS" + LIBS="$kde_save_LIBS" +]) + +AC_DEFUN([KDE_JAVA_PREFIX], +[ + dir=`dirname "$1"` + base=`basename "$1"` + list=`ls -1 $dir 2> /dev/null` + for entry in $list; do + if test -d $dir/$entry/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/bin" + ;; + esac + elif test -d $dir/$entry/jre/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/jre/bin" + ;; + esac + fi + done +]) + +dnl KDE_CHEC_JAVA_DIR(onlyjre) +AC_DEFUN([KDE_CHECK_JAVA_DIR], +[ + +AC_ARG_WITH(java, +AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), +[ ac_java_dir=$withval +], ac_java_dir="" +) + +AC_MSG_CHECKING([for Java]) + +dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH +if test "x$ac_java_dir" = "xno"; then + kde_java_bindir=no + kde_java_includedir=no + kde_java_libjvmdir=no + kde_java_libgcjdir=no + kde_java_libhpidir=no +else + if test "x$ac_java_dir" = "x"; then + + + dnl No option set -> collect list of candidate paths + if test -n "$JAVA_HOME"; then + KDE_JAVA_PREFIX($JAVA_HOME) + fi + KDE_JAVA_PREFIX(/usr/j2se) + KDE_JAVA_PREFIX(/usr/lib/j2se) + KDE_JAVA_PREFIX(/usr/j*dk*) + KDE_JAVA_PREFIX(/usr/lib/j*dk*) + KDE_JAVA_PREFIX(/opt/j*sdk*) + KDE_JAVA_PREFIX(/usr/lib/java*) + KDE_JAVA_PREFIX(/usr/java*) + KDE_JAVA_PREFIX(/usr/java/j*dk*) + KDE_JAVA_PREFIX(/usr/java/j*re*) + KDE_JAVA_PREFIX(/usr/lib/SunJava2*) + KDE_JAVA_PREFIX(/usr/lib/SunJava*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava*) + KDE_JAVA_PREFIX(/opt/java*) + + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + for dir in $PATH; do + if test -d "$dir"; then + javadirs="$javadirs $dir" + fi + done + IFS=$kde_save_IFS + jredirs= + + dnl Now javadirs contains a list of paths that exist, all ending with bin/ + for dir in $javadirs; do + dnl Check for the java executable + if test -x "$dir/java"; then + sane_path=$(cd $dir; /bin/pwd) + dnl And also check for a libjvm.so somewhere under there + dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. + if test "$sane_path" != "/usr/bin"; then + libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + if test ! -f $libjvmdir/libjvm.so; then continue; fi + jredirs="$jredirs $dir" + fi + fi + done + + dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found + JAVAC= + JAVA= + kde_java_bindir=no + for dir in $jredirs; do + JAVA="$dir/java" + kde_java_bindir=$dir + if test -x "$dir/javac"; then + JAVAC="$dir/javac" + break + fi + done + + if test -n "$JAVAC"; then + dnl this substitution might not work - well, we test for jni.h below + kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` + else + kde_java_includedir=no + fi + else + dnl config option set + kde_java_bindir=$ac_java_dir/bin + if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then + kde_java_includedir=no + else + kde_java_includedir=$ac_java_dir/include + fi + fi +fi + +dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" +if test "x$kde_java_bindir" != "xno"; then + + dnl Look for libjvm.so + kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + dnl Look for libgcj.so + kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` + dnl Look for libhpi.so and avoid green threads + kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` + + dnl Now check everything's fine under there + dnl the include dir is our flag for having the JDK + if test -d "$kde_java_includedir"; then + if test ! -x "$kde_java_bindir/javac"; then + AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) + fi + if test ! -x "$kde_java_bindir/javah"; then + AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -x "$kde_java_bindir/jar"; then + AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -r "$kde_java_includedir/jni.h"; then + AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) + fi + + jni_includes="-I$kde_java_includedir" + dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. + dnl and under linux here.. + + dnl not needed for gcj + + if test "x$kde_java_libgcjdir" = "x"; then + test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" + test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" + test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" + fi + + else + JAVAC= + jni_includes= + fi + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libjvmdir/libjvm.so"; then + AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) + fi + else + if test ! -r "$kde_java_libgcjdir/libgcj.so"; then + AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) + fi + fi + + if test ! -x "$kde_java_bindir/java"; then + AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + + dnl not needed for gcj compile + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libhpidir/libhpi.so"; then + AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) + fi + fi + + if test -n "$jni_includes"; then + dnl Check for JNI version + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_cxxflags_safe="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" + + AC_TRY_COMPILE([ + #include + ], + [ + #ifndef JNI_VERSION_1_2 + Syntax Error + #endif + ],[ kde_jni_works=yes ], + [ kde_jni_works=no ]) + + if test $kde_jni_works = no; then + AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. + You need to have Java Development Kit (JDK) version 1.2. + + Use --with-java to specify another location. + Use --without-java to configure without java support. + Or download a newer JDK and try again. + See e.g. http://java.sun.com/products/jdk/1.2 ]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + AC_LANG_RESTORE + + dnl All tests ok, inform and subst the variables + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + if test "x$kde_java_libgcjdir" = "x"; then + JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" + else + JVMLIBS="-L$kde_java_libgcjdir -lgcj" + fi + AC_MSG_RESULT([java JDK in $kde_java_bindir]) + + else + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([java JRE in $kde_java_bindir]) + fi +elif test -d "/Library/Java/Home"; then + kde_java_bindir="/Library/Java/Home/bin" + jni_includes="-I/Library/Java/Home/include" + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + JVMLIBS="-Wl,-framework,JavaVM" + + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([Apple Java Framework]) +else + AC_MSG_RESULT([none found]) +fi + +AC_SUBST(JAVAC) +AC_SUBST(JAVAH) +AC_SUBST(JAR) +AC_SUBST(JVMLIBS) +AC_SUBST(jni_includes) + +# for backward compat +kde_cv_java_includedir=$kde_java_includedir +kde_cv_java_bindir=$kde_java_bindir +]) + +dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. +dnl When the argument list becomes big, as in KDE for AC_OUTPUT in +dnl big packages, m4_foreach is dog-slow. So use our own version of +dnl it. (matz@kde.org) +m4_define([mm_foreach], +[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) +m4_define([mm_car], [[$1]]) +m4_define([mm_car2], [[$@]]) +m4_define([_mm_foreach], +[m4_if(m4_quote($2), [], [], + [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], + mm_car2(m4_shift($2)), + [$3])])]) +m4_define([AC_FOREACH], +[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) + +AC_DEFUN([KDE_NEED_FLEX], +[ +kde_libs_safe=$LIBS +LIBS="$LIBS $USER_LDFLAGS" +AM_PROG_LEX +LIBS=$kde_libs_safe +if test -z "$LEXLIB"; then + AC_MSG_ERROR([You need to have flex installed.]) +fi +AC_SUBST(LEXLIB) +]) + +AC_DEFUN([AC_PATH_QTOPIA], +[ + dnl TODO: use AC_CACHE_VAL + + if test -z "$1"; then + qtopia_minver_maj=1 + qtopia_minver_min=5 + qtopia_minver_pat=0 + else + qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` + qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` + qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` + fi + + qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" + qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" + + AC_REQUIRE([AC_PATH_QT]) + + AC_MSG_CHECKING([for Qtopia]) + + LIB_QTOPIA="-lqpe" + AC_SUBST(LIB_QTOPIA) + + kde_qtopia_dirs="$QPEDIR /opt/Qtopia" + + ac_qtopia_incdir=NO + + AC_ARG_WITH(qtopia-dir, + AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), + [ ac_qtopia_incdir="$withval"/include] ) + + qtopia_incdirs="" + for dir in $kde_qtopia_dirs; do + qtopia_incdirs="$qtopia_incdirs $dir/include" + done + + if test ! "$ac_qtopia_incdir" = "NO"; then + qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" + fi + + qtopia_incdir="" + AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) + ac_qtopia_incdir="$qtopia_incdir" + + if test -z "$qtopia_incdir"; then + AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) + fi + + qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; + qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; + qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; + + qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" + qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" + if test "$qtopia_ver" -lt "$qtopia_minver"; then + AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr +is required.]) + fi + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + ac_cxxflags_safe="$CXXFLAGS" + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" + LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" + LIBS="$LIBS $LIB_QTOPIA $LIBQT" + + cat > conftest.$ac_ext < +#include + +int main( int argc, char **argv ) +{ + QPEApplication app( argc, argv ); + return 0; +} +EOF + + if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* + else + rm -f conftest* + AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at +the end of config.log]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + AC_LANG_RESTORE + + QTOPIA_INCLUDES="-I$qtopia_incdir" + AC_SUBST(QTOPIA_INCLUDES) + + AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) +]) + + +AC_DEFUN([KDE_INIT_DOXYGEN], +[ +AC_MSG_CHECKING([for Qt docs]) +kde_qtdir= +if test "${with_qt_dir+set}" = set; then + kde_qtdir="$with_qt_dir" +fi + +AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) +AC_MSG_RESULT($QTDOCDIR) + +AC_SUBST(QTDOCDIR) + +KDE_FIND_PATH(dot, DOT, [], []) +if test -n "$DOT"; then + KDE_HAVE_DOT="YES" +else + KDE_HAVE_DOT="NO" +fi +AC_SUBST(KDE_HAVE_DOT) +KDE_FIND_PATH(doxygen, DOXYGEN, [], []) +AC_SUBST(DOXYGEN) + +DOXYGEN_PROJECT_NAME="$1" +DOXYGEN_PROJECT_NUMBER="$2" +AC_SUBST(DOXYGEN_PROJECT_NAME) +AC_SUBST(DOXYGEN_PROJECT_NUMBER) + +KDE_HAS_DOXYGEN=no +if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then + KDE_HAS_DOXYGEN=yes +fi +AC_SUBST(KDE_HAS_DOXYGEN) + +]) + + +AC_DEFUN([AC_FIND_BZIP2], +[ +AC_MSG_CHECKING([for bzDecompress in libbz2]) +AC_CACHE_VAL(ac_cv_lib_bzip2, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#define BZ_NO_STDIO +#include +], + [ bz_stream s; (void) bzDecompress(&s); ], + eval "ac_cv_lib_bzip2='-lbz2'", + eval "ac_cv_lib_bzip2=no") +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +AC_MSG_RESULT($ac_cv_lib_bzip2) + +if test ! "$ac_cv_lib_bzip2" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2" + AC_SUBST(LIBBZ2) + +else + + cxx_shared_flag= + ld_shared_flag= + KDE_CHECK_COMPILER_FLAG(shared, [ + ld_shared_flag="-shared" + ]) + KDE_CHECK_COMPILER_FLAG(fPIC, [ + cxx_shared_flag="-fPIC" + ]) + + AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) + AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_LIBS="$LIBS" + LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" + kde_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" + + AC_TRY_LINK(dnl + [ + #define BZ_NO_STDIO + #include + ], + [ bz_stream s; (void) BZ2_bzDecompress(&s); ], + eval "ac_cv_lib_bzip2_prefix='-lbz2'", + eval "ac_cv_lib_bzip2_prefix=no") + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + + AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) + + if test ! "$ac_cv_lib_bzip2_prefix" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2_prefix" + AC_SUBST(LIBBZ2) + + AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) + dnl else, we just ignore this + fi + +fi +AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the SSL headers and libraries. +dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) +dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([KDE_CHECK_SSL], +[ +LIBSSL="-lssl -lcrypto" +AC_REQUIRE([KDE_CHECK_LIB64]) + +ac_ssl_includes=NO ac_ssl_libraries=NO +ssl_libraries="" +ssl_includes="" +AC_ARG_WITH(ssl-dir, + AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), + [ ac_ssl_includes="$withval"/include + ac_ssl_libraries="$withval"/lib$kdelibsuff + ]) + +want_ssl=yes +AC_ARG_WITH(ssl, + AC_HELP_STRING([--without-ssl],[disable SSL checks]), + [want_ssl=$withval]) + +if test $want_ssl = yes; then + +AC_MSG_CHECKING(for OpenSSL) + +AC_CACHE_VAL(ac_cv_have_ssl, +[#try to guess OpenSSL locations + + ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" + ssl_incdirs="$ac_ssl_includes $ssl_incdirs" + AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) + ac_ssl_includes="$ssl_incdir" + + ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" + if test ! "$ac_ssl_libraries" = "NO"; then + ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" + fi + + test=NONE + ssl_libdir=NONE + for dir in $ssl_libdirs; do + try="ls -1 $dir/libssl*" + if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done + + ac_ssl_libraries="$ssl_libdir" + + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" + LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" + + AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, + ac_ssl_rsaref="yes" + , + ac_ssl_rsaref="no" + ) + + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then + have_ssl=no + else + have_ssl=yes; + fi + + ]) + + eval "$ac_cv_have_ssl" + + AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) + + AC_MSG_CHECKING([whether OpenSSL uses rsaref]) + AC_MSG_RESULT($ac_ssl_rsaref) + + AC_MSG_CHECKING([for easter eggs]) + AC_MSG_RESULT([none found]) + +else + have_ssl=no +fi + +if test "$have_ssl" = yes; then + AC_MSG_CHECKING(for OpenSSL version) + dnl Check for SSL version + AC_CACHE_VAL(ac_cv_ssl_version, + [ + + cat >conftest.$ac_ext < +#include + int main() { + +#ifndef OPENSSL_VERSION_NUMBER + printf("ssl_version=\\"error\\"\n"); +#else + if (OPENSSL_VERSION_NUMBER < 0x00906000) + printf("ssl_version=\\"old\\"\n"); + else + printf("ssl_version=\\"ok\\"\n"); +#endif + return (0); + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + if test "$ac_ssl_includes" != "/usr/include"; then + CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" + fi + + if AC_TRY_EVAL(ac_link); then + + if eval `./conftest 2>&5`; then + if test $ssl_version = error; then + AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) + else + if test $ssl_version = old; then + AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) + have_ssl=no + fi + fi + ac_cv_ssl_version="ssl_version=$ssl_version" + else + AC_MSG_ERROR([Your system couldn't run a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + + else + AC_MSG_ERROR([Your system couldn't link a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + ]) + + eval "$ac_cv_ssl_version" + AC_MSG_RESULT($ssl_version) +fi + +if test "$have_ssl" != yes; then + LIBSSL=""; +else + AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) + ac_cv_have_ssl="have_ssl=yes \ + ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" + + + ssl_libraries="$ac_ssl_libraries" + ssl_includes="$ac_ssl_includes" + + if test "$ac_ssl_rsaref" = yes; then + LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" + fi + + if test $ssl_version = "old"; then + AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) + fi +fi + +SSL_INCLUDES= + +if test "$ssl_includes" = "/usr/include"; then + if test -f /usr/kerberos/include/krb5.h; then + SSL_INCLUDES="-I/usr/kerberos/include" + fi +elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then + SSL_INCLUDES="-I$ssl_includes" +fi + +if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then + SSL_LDFLAGS="" +else + SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" +fi + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LDFLAGS) +AC_SUBST(LIBSSL) +]) + +AC_DEFUN([KDE_CHECK_STRLCPY], +[ + AC_REQUIRE([AC_CHECK_STRLCAT]) + AC_REQUIRE([AC_CHECK_STRLCPY]) + AC_CHECK_SIZEOF(size_t) + AC_CHECK_SIZEOF(unsigned long) + + AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) + AC_TRY_COMPILE(,[ + #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG + choke me + #endif + ],AC_MSG_RESULT([yes]),[ + AC_MSG_RESULT(no) + AC_MSG_ERROR([ + Apparently on your system our assumption sizeof size_t == sizeof unsigned long + does not apply. Please mail kde-devel@kde.org with a description of your system! + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_BINUTILS], +[ + AC_MSG_CHECKING([if ld supports unversioned version maps]) + + kde_save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + echo "{ local: extern \"C++\" { foo }; };" > conftest.map + AC_TRY_LINK([int foo;], +[ +#ifdef __INTEL_COMPILER +icc apparently does not support libtools version-info and version-script +at the same time. Dunno where the bug is, but until somebody figured out, +better disable the optional version scripts. +#endif + + foo = 42; +], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) + LDFLAGS="$kde_save_LDFLAGS" + rm -f conftest.map + AM_CONDITIONAL(include_VERSION_SCRIPT, + [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) + + AC_MSG_RESULT($kde_supports_versionmaps) +]) + +AC_DEFUN([AM_PROG_OBJC],[ +AC_CHECK_PROGS(OBJC, gcc, gcc) +test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) +if test "x${OBJCFLAGS-unset}" = xunset; then + OBJCFLAGS="-g -O2" +fi +AC_SUBST(OBJCFLAGS) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) +]) + +AC_DEFUN([KDE_CHECK_PERL], +[ + KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ + AC_MSG_ERROR([No Perl found in your $PATH. +We need perl to generate some code.]) + ]) + AC_SUBST(PERL) +]) + +AC_DEFUN([KDE_CHECK_LARGEFILE], +[ +AC_SYS_LARGEFILE +if test "$ac_cv_sys_file_offset_bits" != no; then + CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" +fi + +if test "x$ac_cv_sys_large_files" != "xno"; then + CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" +fi + +]) + +dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) +dnl which allows to search for libs that get installed into the KDE prefix. +dnl +dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) +dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page +dnl also defines KSTUFF_PKG_ERRORS on error +AC_DEFUN([KDE_PKG_CHECK_MODULES], [ + + PKG_CONFIG_PATH="$prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + if test "$prefix" != "$kde_libs_prefix"; then + PKG_CONFIG_PATH="$kde_libs_prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + fi + export PKG_CONFIG_PATH + PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) +]) + + +dnl Check for PIE support in the compiler and linker +AC_DEFUN([KDE_CHECK_PIE_SUPPORT], +[ + AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIE" + LDFLAGS="$LDFLAGS -pie" + + AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ]) + + AC_MSG_CHECKING(if enabling -pie/fPIE support) + + AC_ARG_ENABLE(pie, + AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), + [kde_has_pie_support=$enableval], + [kde_has_pie_support=detect]) + + if test "$kde_has_pie_support" = "detect"; then + kde_has_pie_support=$kde_cv_val_pie_support + fi + + AC_MSG_RESULT([$kde_has_pie_support]) + + KDE_USE_FPIE="" + KDE_USE_PIE="" + + AC_SUBST([KDE_USE_FPIE]) + AC_SUBST([KDE_USE_PIE]) + + if test "$kde_has_pie_support" = "yes"; then + KDE_USE_FPIE="-fPIE" + KDE_USE_PIE="-pie" + fi +]) +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit , 1996 +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, but +## WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +## General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +## +## As a special exception to the GNU General Public License, if you +## distribute this file as part of a program that contains a +## configuration script generated by Autoconf, you may include it under +## the same distribution terms that you use for the rest of that program. + +# serial 47 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +AC_SUBST(LIBTOOL)dnl + +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + + +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl + +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl + +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LINUX_64_MODE="32" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + LINUX_64_MODE="64" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + testring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ + = "XX$testring") >/dev/null 2>&1 && + new_result=`expr "X$testring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + testring=$testring$testring + done + testring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +kfreebsd*-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + libsuff= + if test "x$LINUX_64_MODE" = x64; then + # Some platforms are per default 64-bit, so there's no /lib64 + if test -d /lib64 -a ! -h /lib64; then + libsuff=64 + fi + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" + sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && test "X$CXX" != "Xno"; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + case $host_cpu in + alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) + lt_cv_deplibs_check_method=pass_all ;; + # the debian people say, arm and glibc 2.3.1 works for them with pass_all + arm* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + darwin* | rhapsody*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext='$shrext' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGISTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | kfreebsd*-gnu) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi4*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' + ;; + 10.*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' + ;; + esac + fi + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | kfreebsd*-gnu) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) + +dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) +dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page +dnl also defines GSTUFF_PKG_ERRORS on error +AC_DEFUN([PKG_CHECK_MODULES], [ + succeeded=no + + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + if test "$PKG_CONFIG" = "no" ; then + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + PKG_CONFIG_MIN_VERSION=0.9.0 + if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then + AC_MSG_CHECKING(for $2) + + if $PKG_CONFIG --exists "$2" ; then + AC_MSG_RESULT(yes) + succeeded=yes + + AC_MSG_CHECKING($1_CFLAGS) + $1_CFLAGS=`$PKG_CONFIG --cflags "$2"` + AC_MSG_RESULT($$1_CFLAGS) + + AC_MSG_CHECKING($1_LIBS) + $1_LIBS=`$PKG_CONFIG --libs "$2"` + AC_MSG_RESULT($$1_LIBS) + else + $1_CFLAGS="" + $1_LIBS="" + ## If we have a custom action on failure, don't print errors, but + ## do set a variable so people can do so. + $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` + ifelse([$4], ,echo $$1_PKG_ERRORS,) + fi + + AC_SUBST($1_CFLAGS) + AC_SUBST($1_LIBS) + else + echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer." + echo "*** See http://www.freedesktop.org/software/pkgconfig" + fi + fi + + if test $succeeded = yes; then + ifelse([$3], , :, [$3]) + else + ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4]) + fi +]) + + diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..dd92cb3 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,863 @@ +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.6])]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +# +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([acinclude.m4]) diff --git a/admin/Doxyfile.am b/admin/Doxyfile.am new file mode 100644 index 0000000..7ef5b5c --- /dev/null +++ b/admin/Doxyfile.am @@ -0,0 +1,102 @@ +## generate API documentation with doxygen +apidox-am-yes: + @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$DOXDATA" ; then \ + export DOXDATA=$(kde_libs_htmldir)/en/common ; \ + fi ; \ + abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\ + test -d $(top_builddir)/apidocs || \ + ( cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ + --no-modulename --installdir=$(kde_libs_htmldir)/en \ + --no-recurse $(abs_top_srcdir) . ) ; \ + cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ + --recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \ + $$abs_top_srcdir $(subdir) + +apidox-am-toplevel-yes: + @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \ + export DOXDATA=$(kde_libs_htmldir)/en/common ; \ + fi ; \ + abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\ + cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ + --no-modulename --installdir=$(kde_libs_htmldir)/en \ + $$abs_top_srcdir + +## Don't generate API documentation without doxygen +apidox-am-no: + +apidox-am-toplevel-no: + + +apidox: + @if test "$(subdir)" != "."; then \ + $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\ + else \ + $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\ + fi + + + +install-data-local: install-apidox + +## install API documentation +install-apidox: + @if test "$(subdir)" != "."; then \ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \ + if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \ + echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + fi; \ + if test -d $(top_builddir)/apidocs/$(subdir)/html; then \ + list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \ + echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\ + for file in $$list; do \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ + done; \ + fi; \ + else\ + if test -d $(top_builddir)/apidocs; then \ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\ + list=`cd $(top_builddir)/apidocs && ls -1`; \ + echo "installing $(top_builddir)/apidocs/$$file" ;\ + echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \ + for file in $$list; do \ + if test -f $(top_builddir)/apidocs/$$file; then \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ + fi; \ + done ; fi; \ + fi + +uninstall-local: uninstall-apidox + +## uninstall API documentation +uninstall-apidox: + @if test "$(subdir)" != "."; then \ + if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \ + rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + fi \ + else \ + if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \ + rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ + fi \ + fi + +install-apidox-recurse: install-apidox + @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \ + list='$(SUBDIRS)'; \ + for subdir in $$list; do \ + if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \ + echo "Installing apidox from $$subdir"; \ + if test "$$subdir" != "."; then \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \ + fi ; fi ;\ + done; \ + fi + + + +.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes + + +# Local Variables: +# mode: makefile +# End: diff --git a/admin/Doxyfile.global b/admin/Doxyfile.global new file mode 100755 index 0000000..1b9f560 --- /dev/null +++ b/admin/Doxyfile.global @@ -0,0 +1,192 @@ +OUTPUT_LANGUAGE = English +USE_WINDOWS_ENCODING = NO +BRIEF_MEMBER_DESC = NO +REPEAT_BRIEF = YES +ABBREVIATE_BRIEF = +ALWAYS_DETAILED_SEC = YES +INLINE_INHERITED_MEMB = NO +FULL_PATH_NAMES = NO +STRIP_FROM_PATH = +SHORT_NAMES = NO +JAVADOC_AUTOBRIEF = YES +MULTILINE_CPP_IS_BRIEF = NO +INHERIT_DOCS = YES +DISTRIBUTE_GROUP_DOC = NO +TAB_SIZE = 4 +OPTIMIZE_OUTPUT_FOR_C = NO +OPTIMIZE_OUTPUT_JAVA = NO +SUBGROUPING = YES +EXTRACT_ALL = NO +EXTRACT_PRIVATE = NO +EXTRACT_STATIC = YES +EXTRACT_LOCAL_CLASSES = NO +HIDE_UNDOC_MEMBERS = NO +HIDE_UNDOC_CLASSES = YES +HIDE_FRIEND_COMPOUNDS = NO +HIDE_IN_BODY_DOCS = NO +INTERNAL_DOCS = NO +CASE_SENSE_NAMES = YES +HIDE_SCOPE_NAMES = NO +SHOW_INCLUDE_FILES = YES +INLINE_INFO = YES +SORT_BRIEF_DOCS = NO +SORT_BY_SCOPE_NAME = NO +GENERATE_TESTLIST = NO +GENERATE_BUGLIST = YES +GENERATE_DEPRECATEDLIST= YES +ENABLED_SECTIONS = +MAX_INITIALIZER_LINES = 30 +SHOW_USED_FILES = YES +QUIET = YES +WARNINGS = NO +WARN_IF_UNDOCUMENTED = NO +WARN_IF_DOC_ERROR = YES +WARN_FORMAT = +WARN_LOGFILE = +INPUT = +FILE_PATTERNS = *.h \ + *.cpp \ + *.cc \ + *.hpp \ + *.dox \ + *.c++ \ + *.cxx \ + *.h++ \ + *.hh +RECURSIVE = YES +EXCLUDE = +EXCLUDE_SYMLINKS = NO +EXCLUDE_PATTERNS = *.moc.* \ + moc* \ + *.all_cpp.* \ + *unload.* \ + */test/* \ + */tests/* \ + *_p.h +EXAMPLE_PATH = +EXAMPLE_PATTERNS = +EXAMPLE_RECURSIVE = NO +IMAGE_PATH = +INPUT_FILTER = +FILTER_SOURCE_FILES = NO +SOURCE_BROWSER = YES +INLINE_SOURCES = NO +STRIP_CODE_COMMENTS = YES +REFERENCED_BY_RELATION = YES +REFERENCES_RELATION = YES +VERBATIM_HEADERS = YES +ALPHABETICAL_INDEX = YES +COLS_IN_ALPHA_INDEX = 3 +HTML_OUTPUT = +HTML_FILE_EXTENSION = .html +HTML_HEADER = ../apidocs/common/header.html +HTML_FOOTER = ../apidocs/common/footer.html +HTML_STYLESHEET = ../apidocs/common/doxygen.css +HTML_ALIGN_MEMBERS = YES +GENERATE_HTMLHELP = NO +CHM_FILE = +HHC_LOCATION = +GENERATE_CHI = NO +BINARY_TOC = NO +TOC_EXPAND = NO +DISABLE_INDEX = YES +ENUM_VALUES_PER_LINE = 4 +GENERATE_TREEVIEW = NO +TREEVIEW_WIDTH = 250 +GENERATE_LATEX = NO +LATEX_OUTPUT = +LATEX_CMD_NAME = latex +MAKEINDEX_CMD_NAME = makeindex +COMPACT_LATEX = NO +PAPER_TYPE = a4wide +EXTRA_PACKAGES = +LATEX_HEADER = +PDF_HYPERLINKS = NO +USE_PDFLATEX = NO +LATEX_BATCHMODE = NO +LATEX_HIDE_INDICES = NO +GENERATE_RTF = NO +RTF_OUTPUT = +COMPACT_RTF = NO +RTF_HYPERLINKS = NO +RTF_STYLESHEET_FILE = +RTF_EXTENSIONS_FILE = +GENERATE_MAN = NO +MAN_OUTPUT = +MAN_EXTENSION = .kde3 +MAN_LINKS = YES +GENERATE_XML = NO +XML_OUTPUT = xml +XML_SCHEMA = +XML_DTD = +XML_PROGRAMLISTING = NO +GENERATE_AUTOGEN_DEF = NO +GENERATE_PERLMOD = NO +PERLMOD_LATEX = NO +PERLMOD_PRETTY = YES +PERLMOD_MAKEVAR_PREFIX = +ENABLE_PREPROCESSING = YES +SEARCH_INCLUDES = YES +INCLUDE_PATH = +INCLUDE_FILE_PATTERNS = +PREDEFINED = QT_VERSION=320 \ + __cplusplus \ + Q_WS_X11 +EXPAND_AS_DEFINED = +SKIP_FUNCTION_MACROS = YES +TAGFILES = +GENERATE_TAGFILE = +ALLEXTERNALS = NO +EXTERNAL_GROUPS = NO +PERL_PATH = +CLASS_DIAGRAMS = YES +HIDE_UNDOC_RELATIONS = NO +HAVE_DOT = NO +UML_LOOK = NO +TEMPLATE_RELATIONS = YES +INCLUDE_GRAPH = YES +INCLUDED_BY_GRAPH = YES +CALL_GRAPH = NO +GRAPHICAL_HIERARCHY = YES +DOT_IMAGE_FORMAT = png +DOT_PATH = +DOTFILE_DIRS = +MAX_DOT_GRAPH_WIDTH = 800 +MAX_DOT_GRAPH_HEIGHT = 1024 +MAX_DOT_GRAPH_DEPTH = 0 +GENERATE_LEGEND = YES +DOT_CLEANUP = YES +SEARCHENGINE = NO + +### KDE Settings +ALIASES = \ + "intern=\parInternal use only." \ + "reimp=\parReimplemented from superclass." \ + "obsolete=@deprecated" \ + "feature=\xrefitem features \"Feature(s)\" \"Features\"" \ + "maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \ + "unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \ + "requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \ + "faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \ + "authors=\xrefitem authors \"Author(s)\" \"Authors\"" \ + "FIXME=\xrefitem fixme \"Fixme\" \"Fixme\"" + +HTML_ALIGN_MEMBERS = YES +REFERENCED_BY_RELATION = NO +REFERENCES_RELATION = NO +VERBATIM_HEADERS = NO +GENERATE_HTML = YES +SOURCE_BROWSER = YES +GENERATE_AUTOGEN_DEF = NO +DETAILS_AT_TOP = YES +SORT_MEMBER_DOCS = YES +GENERATE_TODOLIST = YES +IGNORE_PREFIX = K +GENERATE_HTML = YES +CLASS_GRAPH = YES +COLLABORATION_GRAPH = NO + + +MACRO_EXPANSION = YES +EXPAND_ONLY_PREDEF = YES + diff --git a/admin/Makefile.common b/admin/Makefile.common new file mode 100644 index 0000000..d07b404 --- /dev/null +++ b/admin/Makefile.common @@ -0,0 +1,37 @@ +### Makefile.common +### +### Copyright (C) 2002 by the KDE developers + +### All the real work is done by the shellscript cvs.sh + +SHELL=/bin/sh + +cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages: + @admindir=$(admindir); \ + if test "x$$admindir" = x; then \ + admindir=.; until test -f $$admindir/admin/cvs.sh; do \ + admindir=$$admindir/..; \ + if test `cd $$admindir && pwd` = / ; then break; fi; \ + done; \ + admindir=$$admindir/admin; \ + if test -f $$admindir/cvs.sh; then :; else \ + echo "Can't find the admin/ directory in any parent of the"; \ + echo "current directory. Please set it with admindir=..."; \ + exit 1; \ + fi; \ + fi; \ + if test "$@" = "package-merge"; then \ + MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \ + $(SHELL) $$admindir/cvs.sh package-merge ;\ + else \ + MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\ + fi + +configure.in: configure.files subdirs +configure.files: subdirs + +svn: cvs + +.SILENT: + +.PHONY: svn cvs dist package-merge package-messages diff --git a/admin/acinclude.m4.in b/admin/acinclude.m4.in new file mode 100644 index 0000000..27476d4 --- /dev/null +++ b/admin/acinclude.m4.in @@ -0,0 +1,5972 @@ +## -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +dnl IMPORTANT NOTE: +dnl Please do not modify this file unless you expect your modifications to be +dnl carried into every other module in the repository. +dnl +dnl Single-module modifications are best placed in configure.in for kdelibs +dnl and kdebase or configure.in.in if present. + +# KDE_PATH_X_DIRECT +dnl Internal subroutine of AC_PATH_X. +dnl Set ac_x_includes and/or ac_x_libraries. +AC_DEFUN([KDE_PATH_X_DIRECT], +[ +AC_REQUIRE([KDE_CHECK_LIB64]) + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +AC_TRY_CPP([#include <$x_direct_test_include>], +[# We can compile using X headers with no special include directory. +ac_x_includes=], +[# Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done]) +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +AC_TRY_LINK([#include ], [${x_direct_test_function}(1)], +[LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries=], +[LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ + /usr/X11/lib${kdelibsuff} \ + /usr/X11R6/lib${kdelibsuff} \ + /usr/X11R5/lib${kdelibsuff} \ + /usr/X11R4/lib${kdelibsuff} \ + \ + /usr/lib${kdelibsuff}/X11 \ + /usr/lib${kdelibsuff}/X11R6 \ + /usr/lib${kdelibsuff}/X11R5 \ + /usr/lib${kdelibsuff}/X11R4 \ + \ + /usr/local/X11/lib${kdelibsuff} \ + /usr/local/X11R6/lib${kdelibsuff} \ + /usr/local/X11R5/lib${kdelibsuff} \ + /usr/local/X11R4/lib${kdelibsuff} \ + \ + /usr/local/lib${kdelibsuff}/X11 \ + /usr/local/lib${kdelibsuff}/X11R6 \ + /usr/local/lib${kdelibsuff}/X11R5 \ + /usr/local/lib${kdelibsuff}/X11R4 \ + \ + /usr/X386/lib${kdelibsuff} \ + /usr/x386/lib${kdelibsuff} \ + /usr/XFree86/lib${kdelibsuff}/X11 \ + \ + /usr/lib${kdelibsuff} \ + /usr/local/lib${kdelibsuff} \ + /usr/unsupported/lib${kdelibsuff} \ + /usr/athena/lib${kdelibsuff} \ + /usr/local/x11r5/lib${kdelibsuff} \ + /usr/lpp/Xamples/lib${kdelibsuff} \ + /lib/usr/lib${kdelibsuff}/X11 \ + \ + /usr/openwin/lib${kdelibsuff} \ + /usr/openwin/share/lib${kdelibsuff} \ + ; \ +do +dnl Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done]) +fi # $ac_x_libraries = NO +]) + + +dnl ------------------------------------------------------------------------ +dnl Find a file (or one of more files in a list of dirs) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_FIND_FILE], +[ +$3=NO +for i in $2; +do + for j in $1; + do + echo "configure: __oline__: $i/$j" >&AC_FD_CC + if test -r "$i/$j"; then + echo "taking that" >&AC_FD_CC + $3=$i + break 2 + fi + done +done +]) + +dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, +dnl if-not-found, test-parameter, prepend-path) +dnl +dnl Look for program-name in list-of-dirs+$PATH. +dnl If prepend-path is set, look in $PATH+list-of-dirs instead. +dnl If found, $variable-name is set. If not, if-not-found is evaluated. +dnl test-parameter: if set, the program is executed with this arg, +dnl and only a successful exit code is required. +AC_DEFUN([KDE_FIND_PATH], +[ + AC_MSG_CHECKING([for $1]) + if test -n "$$2"; then + kde_cv_path="$$2"; + else + kde_cache=`echo $1 | sed 'y%./+-%__p_%'` + + AC_CACHE_VAL(kde_cv_path_$kde_cache, + [ + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + dirs="" + for dir in $PATH; do + dirs="$dirs $dir" + done + if test -z "$6"; then dnl Append dirs in PATH (default) + dirs="$3 $dirs" + else dnl Prepend dirs in PATH (if 6th arg is set) + dirs="$dirs $3" + fi + IFS=$kde_save_IFS + + for dir in $dirs; do + if test -x "$dir/$1"; then + if test -n "$5" + then + evalstr="$dir/$1 $5 2>&1 " + if eval $evalstr; then + kde_cv_path="$dir/$1" + break + fi + else + kde_cv_path="$dir/$1" + break + fi + fi + done + + eval "kde_cv_path_$kde_cache=$kde_cv_path" + + ]) + + eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" + + fi + + if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then + AC_MSG_RESULT(not found) + $4 + else + AC_MSG_RESULT($kde_cv_path) + $2=$kde_cv_path + + fi +]) + +AC_DEFUN([KDE_MOC_ERROR_MESSAGE], +[ + AC_MSG_ERROR([No Qt meta object compiler (moc) found! +Please check whether you installed Qt correctly. +You need to have a running moc binary. +configure tried to run $ac_cv_path_moc and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable MOC to the right one before running +configure. +]) +]) + +AC_DEFUN([KDE_UIC_ERROR_MESSAGE], +[ + AC_MSG_WARN([No Qt ui compiler (uic) found! +Please check whether you installed Qt correctly. +You need to have a running uic binary. +configure tried to run $ac_cv_path_uic and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable UIC to the right one before running +configure. +]) +]) + + +AC_DEFUN([KDE_CHECK_UIC_FLAG], +[ + AC_MSG_CHECKING([whether uic supports -$1 ]) + kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` + AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, + [ + cat >conftest.ui < +EOT + ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" + if AC_TRY_EVAL(ac_uic_testrun); then + eval "kde_cv_prog_uic_$kde_cache=yes" + else + eval "kde_cv_prog_uic_$kde_cache=no" + fi + rm -f conftest* + ]) + + if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then + AC_MSG_RESULT([yes]) + : + $3 + else + AC_MSG_RESULT([no]) + : + $4 + fi +]) + + +dnl ------------------------------------------------------------------------ +dnl Find the meta object compiler and the ui compiler in the PATH, +dnl in $QTDIR/bin, and some more usual places +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_MOC_UIC], +[ + AC_REQUIRE([KDE_CHECK_PERL]) + qt_bindirs="" + for dir in $kde_qt_dirs; do + qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" + done + qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" + if test ! "$ac_qt_bindir" = "NO"; then + qt_bindirs="$ac_qt_bindir $qt_bindirs" + fi + + KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) + if test -z "$UIC_NOT_NEEDED"; then + KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) + if test -z "$UIC_PATH" ; then + KDE_UIC_ERROR_MESSAGE + exit 1 + else + UIC=$UIC_PATH + + if test $kde_qtver = 3; then + KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) + KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) + + if test x$ac_uic_supports_libpath = xyes; then + UIC="$UIC -L \$(kde_widgetdir)" + fi + if test x$ac_uic_supports_nounload = xyes; then + UIC="$UIC -nounload" + fi + fi + fi + else + UIC="echo uic not available: " + fi + + AC_SUBST(MOC) + AC_SUBST(UIC) + + UIC_TR="i18n" + if test $kde_qtver = 3; then + UIC_TR="tr2i18n" + fi + + AC_SUBST(UIC_TR) +]) + +AC_DEFUN([KDE_1_CHECK_PATHS], +[ + KDE_1_CHECK_PATH_HEADERS + + KDE_TEST_RPATH= + + if test -n "$USE_RPATH"; then + + if test -n "$kde_libraries"; then + KDE_TEST_RPATH="-R $kde_libraries" + fi + + if test -n "$qt_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" + fi + + if test -n "$x_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" + fi + + KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" + fi + +AC_MSG_CHECKING([for KDE libraries installed]) +ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR([your system fails at linking a small KDE application! +Check, if your compiler is installed correctly and if you have used the +same compiler to compile Qt and kdelibs as you did use now. +For more details about this problem, look at the end of config.log.]) +fi + +if eval `KDEDIR= ./conftest 2>&5`; then + kde_result=done +else + kde_result=problems +fi + +KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log +kde_have_all_paths=yes + +KDE_SET_PATHS($kde_result) + +]) + +AC_DEFUN([KDE_SET_PATHS], +[ + kde_cv_all_paths="kde_have_all_paths=\"yes\" \ + kde_htmldir=\"$kde_htmldir\" \ + kde_appsdir=\"$kde_appsdir\" \ + kde_icondir=\"$kde_icondir\" \ + kde_sounddir=\"$kde_sounddir\" \ + kde_datadir=\"$kde_datadir\" \ + kde_locale=\"$kde_locale\" \ + kde_cgidir=\"$kde_cgidir\" \ + kde_confdir=\"$kde_confdir\" \ + kde_kcfgdir=\"$kde_kcfgdir\" \ + kde_mimedir=\"$kde_mimedir\" \ + kde_toolbardir=\"$kde_toolbardir\" \ + kde_wallpaperdir=\"$kde_wallpaperdir\" \ + kde_templatesdir=\"$kde_templatesdir\" \ + kde_bindir=\"$kde_bindir\" \ + kde_servicesdir=\"$kde_servicesdir\" \ + kde_servicetypesdir=\"$kde_servicetypesdir\" \ + kde_moduledir=\"$kde_moduledir\" \ + kde_styledir=\"$kde_styledir\" \ + kde_widgetdir=\"$kde_widgetdir\" \ + xdg_appsdir=\"$xdg_appsdir\" \ + xdg_menudir=\"$xdg_menudir\" \ + xdg_directorydir=\"$xdg_directorydir\" \ + kde_result=$1" +]) + +AC_DEFUN([KDE_SET_DEFAULT_PATHS], +[ +if test "$1" = "default"; then + + if test -z "$kde_htmldir"; then + kde_htmldir='\${datadir}/doc/HTML' + fi + if test -z "$kde_appsdir"; then + kde_appsdir='\${datadir}/applnk' + fi + if test -z "$kde_icondir"; then + kde_icondir='\${datadir}/icons' + fi + if test -z "$kde_sounddir"; then + kde_sounddir='\${datadir}/sounds' + fi + if test -z "$kde_datadir"; then + kde_datadir='\${datadir}/apps' + fi + if test -z "$kde_locale"; then + kde_locale='\${datadir}/locale' + fi + if test -z "$kde_cgidir"; then + kde_cgidir='\${exec_prefix}/cgi-bin' + fi + if test -z "$kde_confdir"; then + kde_confdir='\${datadir}/config' + fi + if test -z "$kde_kcfgdir"; then + kde_kcfgdir='\${datadir}/config.kcfg' + fi + if test -z "$kde_mimedir"; then + kde_mimedir='\${datadir}/mimelnk' + fi + if test -z "$kde_toolbardir"; then + kde_toolbardir='\${datadir}/toolbar' + fi + if test -z "$kde_wallpaperdir"; then + kde_wallpaperdir='\${datadir}/wallpapers' + fi + if test -z "$kde_templatesdir"; then + kde_templatesdir='\${datadir}/templates' + fi + if test -z "$kde_bindir"; then + kde_bindir='\${exec_prefix}/bin' + fi + if test -z "$kde_servicesdir"; then + kde_servicesdir='\${datadir}/services' + fi + if test -z "$kde_servicetypesdir"; then + kde_servicetypesdir='\${datadir}/servicetypes' + fi + if test -z "$kde_moduledir"; then + if test "$kde_qtver" = "2"; then + kde_moduledir='\${libdir}/kde2' + else + kde_moduledir='\${libdir}/kde3' + fi + fi + if test -z "$kde_styledir"; then + kde_styledir='\${libdir}/kde3/plugins/styles' + fi + if test -z "$kde_widgetdir"; then + kde_widgetdir='\${libdir}/kde3/plugins/designer' + fi + if test -z "$xdg_appsdir"; then + xdg_appsdir='\${datadir}/applications/kde' + fi + if test -z "$xdg_menudir"; then + xdg_menudir='\${sysconfdir}/xdg/menus' + fi + if test -z "$xdg_directorydir"; then + xdg_directorydir='\${datadir}/desktop-directories' + fi + + KDE_SET_PATHS(defaults) + +else + + if test $kde_qtver = 1; then + AC_MSG_RESULT([compiling]) + KDE_1_CHECK_PATHS + else + AC_MSG_ERROR([path checking not yet supported for KDE 2]) + fi + +fi +]) + +AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], +[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || + test -z "$kde_icondir" || test -z "$kde_sounddir" || + test -z "$kde_datadir" || test -z "$kde_locale" || + test -z "$kde_cgidir" || test -z "$kde_confdir" || + test -z "$kde_kcfgdir" || + test -z "$kde_mimedir" || test -z "$kde_toolbardir" || + test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || + test -z "$kde_bindir" || test -z "$kde_servicesdir" || + test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || + test -z "$kde_styledir" || test -z "kde_widgetdir" || + test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || + test "x$kde_have_all_paths" != "xyes"; then + kde_have_all_paths=no + fi +]) + +AC_DEFUN([KDE_MISSING_PROG_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed KDE correctly. +]) +]) + +AC_DEFUN([KDE_MISSING_ARTS_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed aRts correctly or use +--without-arts to compile without aRts support (this will remove functionality). +]) +]) + +AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], +[ + kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" + test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" + if test -n "$KDEDIRS"; then + kde_save_IFS=$IFS + IFS=: + for dir in $KDEDIRS; do + kde_default_bindirs="$dir/bin $kde_default_bindirs " + done + IFS=$kde_save_IFS + fi +]) + +AC_DEFUN([KDE_SUBST_PROGRAMS], +[ + AC_ARG_WITH(arts, + AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), + [build_arts=$withval], + [build_arts=yes] + ) + AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") + if test "$build_arts" = "no"; then + AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) + fi + + KDE_SET_DEFAULT_BINDIRS + kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" + KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) + KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) + if test "$build_arts" '!=' "no"; then + KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) + KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) + fi + KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) + + kde32ornewer=1 + kde33ornewer=1 + if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then + kde32ornewer= + kde33ornewer= + else + if test "$kde_qtver" = "3"; then + if test "$kde_qtsubver" -le 1; then + kde32ornewer= + fi + if test "$kde_qtsubver" -le 2; then + kde33ornewer= + fi + if test "$KDECONFIG" != "compiled"; then + if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then + kde33ornewer= + fi + fi + fi + fi + + if test -n "$kde32ornewer"; then + KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) + KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) + fi + if test -n "$kde33ornewer"; then + KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) + AC_SUBST(MAKEKDEWIDGETS) + fi + KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) + + if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then + kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" + test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" + AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) + if test "$KDE_XSL_STYLESHEET" = "NO"; then + KDE_XSL_STYLESHEET="" + else + KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" + fi + fi + + DCOP_DEPENDENCIES='$(DCOPIDL)' + if test -n "$kde32ornewer"; then + KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' + DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' + AC_SUBST(KCONFIG_COMPILER) + AC_SUBST(KCFG_DEPENDENCIES) + AC_SUBST(DCOPIDLNG) + fi + AC_SUBST(DCOPIDL) + AC_SUBST(DCOPIDL2CPP) + AC_SUBST(DCOP_DEPENDENCIES) + AC_SUBST(MCOPIDL) + AC_SUBST(ARTSCCONFIG) + AC_SUBST(MEINPROC) + AC_SUBST(KDE_XSL_STYLESHEET) + AC_SUBST(XMLLINT) +])dnl + +AC_DEFUN([AC_CREATE_KFSSTND], +[ +AC_REQUIRE([AC_CHECK_RPATH]) + +AC_MSG_CHECKING([for KDE paths]) +kde_result="" +kde_cached_paths=yes +AC_CACHE_VAL(kde_cv_all_paths, +[ + KDE_SET_DEFAULT_PATHS($1) + kde_cached_paths=no +]) +eval "$kde_cv_all_paths" +KDE_CHECK_PATHS_FOR_COMPLETENESS +if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then + # wrong values were cached, may be, we can set better ones + kde_result= + kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= + kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= + kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= + kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= + kde_have_all_paths= + kde_styledir= + kde_widgetdir= + xdg_appsdir = xdg_menudir= xdg_directorydir= + KDE_SET_DEFAULT_PATHS($1) + eval "$kde_cv_all_paths" + KDE_CHECK_PATHS_FOR_COMPLETENESS + kde_result="$kde_result (cache overridden)" +fi +if test "$kde_have_all_paths" = "no"; then + AC_MSG_ERROR([configure could not run a little KDE program to test the environment. +Since it had compiled and linked before, it must be a strange problem on your system. +Look at config.log for details. If you are not able to fix this, look at +http://www.kde.org/faq/installation.html or any www.kde.org mirror. +(If you're using an egcs version on Linux, you may update binutils!) +]) +else + rm -f conftest* + AC_MSG_RESULT($kde_result) +fi + +bindir=$kde_bindir + +KDE_SUBST_PROGRAMS + +]) + +AC_DEFUN([AC_SUBST_KFSSTND], +[ +AC_SUBST(kde_htmldir) +AC_SUBST(kde_appsdir) +AC_SUBST(kde_icondir) +AC_SUBST(kde_sounddir) +AC_SUBST(kde_datadir) +AC_SUBST(kde_locale) +AC_SUBST(kde_confdir) +AC_SUBST(kde_kcfgdir) +AC_SUBST(kde_mimedir) +AC_SUBST(kde_wallpaperdir) +AC_SUBST(kde_bindir) +dnl X Desktop Group standards +AC_SUBST(xdg_appsdir) +AC_SUBST(xdg_menudir) +AC_SUBST(xdg_directorydir) +dnl for KDE 2 +AC_SUBST(kde_templatesdir) +AC_SUBST(kde_servicesdir) +AC_SUBST(kde_servicetypesdir) +AC_SUBST(kde_moduledir) +AC_SUBST(kdeinitdir, '$(kde_moduledir)') +AC_SUBST(kde_styledir) +AC_SUBST(kde_widgetdir) +if test "$kde_qtver" = 1; then + kde_minidir="$kde_icondir/mini" +else +# for KDE 1 - this breaks KDE2 apps using minidir, but +# that's the plan ;-/ + kde_minidir="/dev/null" +fi +dnl AC_SUBST(kde_minidir) +dnl AC_SUBST(kde_cgidir) +dnl AC_SUBST(kde_toolbardir) +]) + +AC_DEFUN([KDE_MISC_TESTS], +[ + dnl Checks for libraries. + AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD + AC_SUBST(LIBUTIL) + AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD + AC_SUBST(LIBCOMPAT) + kde_have_crypt= + AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], + AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ + AC_MSG_WARN([you have no crypt in either libcrypt or libc. +You should install libcrypt from another source or configure with PAM +support]) + kde_have_crypt=no + ])) + AC_SUBST(LIBCRYPT) + if test $kde_have_crypt = yes; then + AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) + fi + AC_CHECK_SOCKLEN_T + AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + AC_CHECK_LIB(dnet_stub, dnet_ntoa, + [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) + fi + AC_CHECK_FUNC(inet_ntoa) + if test $ac_cv_func_inet_ntoa = no; then + AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") + fi + AC_CHECK_FUNC(connect) + if test $ac_cv_func_connect = no; then + AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , + $X_EXTRA_LIBS) + fi + + AC_CHECK_FUNC(remove) + if test $ac_cv_func_remove = no; then + AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + AC_CHECK_FUNC(shmat, , + AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) + + # more headers that need to be explicitly included on darwin + AC_CHECK_HEADERS(sys/types.h stdint.h) + + # sys/bitypes.h is needed for uint32_t and friends on Tru64 + AC_CHECK_HEADERS(sys/bitypes.h) + + # darwin requires a poll emulation library + AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") + + # for some image handling on Mac OS X + AC_CHECK_HEADERS(Carbon/Carbon.h) + + # CoreAudio framework + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ + AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) + FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" + ]) + + AC_CHECK_RES_INIT + AC_SUBST(LIB_POLL) + AC_SUBST(FRAMEWORK_COREAUDIO) + LIBSOCKET="$X_EXTRA_LIBS" + AC_SUBST(LIBSOCKET) + AC_SUBST(X_EXTRA_LIBS) + AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 + AC_SUBST(LIBUCB) + + case $host in dnl this *is* LynxOS specific + *-*-lynxos* ) + AC_MSG_CHECKING([LynxOS header file wrappers]) + [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] + AC_MSG_RESULT(disabled) + AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS + ;; + esac + + KDE_CHECK_TYPES + KDE_CHECK_LIBDL + KDE_CHECK_STRLCPY + KDE_CHECK_PIE_SUPPORT + +# darwin needs this to initialize the environment +AC_CHECK_HEADERS(crt_externs.h) +AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) + +AH_VERBATIM(_DARWIN_ENVIRON, +[ +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include +# include +# define environ (*_NSGetEnviron()) +#endif +]) + +AH_VERBATIM(_AIX_STRINGS_H_BZERO, +[ +/* + * AIX defines FD_SET in terms of bzero, but fails to include + * that defines bzero. + */ + +#if defined(_AIX) +#include +#endif +]) + +AC_CHECK_FUNCS([vsnprintf snprintf]) + +AH_VERBATIM(_TRU64,[ +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include +#include +#else +#include +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Find the header files and libraries for X-Windows. Extended the +dnl macro AC_PATH_X +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([K_PATH_X], +[ +AC_REQUIRE([KDE_MISC_TESTS])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_ARG_ENABLE( + embedded, + AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), + kde_use_qt_emb=$enableval, + kde_use_qt_emb=no +) + +AC_ARG_ENABLE( + qtopia, + AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), + kde_use_qt_emb_palm=$enableval, + kde_use_qt_emb_palm=no +) + +AC_ARG_ENABLE( + mac, + AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), + kde_use_qt_mac=$enableval, + kde_use_qt_mac=no +) + +# used to disable x11-specific stuff on special platforms +AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") + +if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then + +AC_MSG_CHECKING(for X) + +AC_CACHE_VAL(kde_cv_have_x, +[# One or both of the vars are not set, and there is no cached value. +if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then + kde_x_includes=NO +else + kde_x_includes=$x_includes +fi +if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then + kde_x_libraries=NO +else + kde_x_libraries=$x_libraries +fi + +# below we use the standard autoconf calls +ac_x_libraries=$kde_x_libraries +ac_x_includes=$kde_x_includes + +KDE_PATH_X_DIRECT +dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. +dnl Unfortunately, if compiling with the N32 ABI, this is not the correct +dnl location. The correct location is /usr/lib32 or an undefined value +dnl (the linker is smart enough to pick the correct default library). +dnl Things work just fine if you use just AC_PATH_X_DIRECT. +dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to +dnl /usr/openwin/include, which doesn't work. /usr/include does work, so +dnl x_includes should be left alone. +case "$host" in +mips-sgi-irix6*) + ;; +*-*-solaris*) + ;; +*) + _AC_PATH_X_XMKMF + if test -z "$ac_x_includes"; then + ac_x_includes="." + fi + if test -z "$ac_x_libraries"; then + ac_x_libraries="/usr/lib${kdelibsuff}" + fi +esac +#from now on we use our own again + +# when the user already gave --x-includes, we ignore +# what the standard autoconf macros told us. +if test "$kde_x_includes" = NO; then + kde_x_includes=$ac_x_includes +fi + +# for --x-libraries too +if test "$kde_x_libraries" = NO; then + kde_x_libraries=$ac_x_libraries +fi + +if test "$kde_x_includes" = NO; then + AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) +fi + +if test "$kde_x_libraries" = NO; then + AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) +fi + +# Record where we found X for the cache. +kde_cv_have_x="have_x=yes \ + kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" +])dnl + +eval "$kde_cv_have_x" + +if test "$have_x" != yes; then + AC_MSG_RESULT($have_x) + no_x=yes +else + AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) +fi + +if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then + X_INCLUDES="" + x_includes="."; dnl better than nothing :- + else + x_includes=$kde_x_includes + X_INCLUDES="-I$x_includes" +fi + +if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then + X_LDFLAGS="" + x_libraries="/usr/lib"; dnl better than nothing :- + else + x_libraries=$kde_x_libraries + X_LDFLAGS="-L$x_libraries" +fi +all_includes="$X_INCLUDES" +all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" + +# Check for libraries that X11R6 Xt/Xaw programs need. +ac_save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +# check for ICE first), but we must link in the order -lSM -lICE or +# we get undefined symbols. So assume we have SM if we have ICE. +# These have to be linked with before -lX11, unlike the other +# libraries we check for below, so use a different variable. +# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +AC_CHECK_LIB(ICE, IceConnectionNumber, + [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) +LDFLAGS="$ac_save_LDFLAGS" + +LIB_X11='-lX11 $(LIBSOCKET)' + +AC_MSG_CHECKING(for libXext) +AC_CACHE_VAL(kde_cv_have_libXext, +[ +kde_ldflags_safe="$LDFLAGS" +kde_libs_safe="$LIBS" + +LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" +LIBS="-lXext -lX11 $LIBSOCKET" + +AC_TRY_LINK([ +#include +#ifdef STDC_HEADERS +# include +#endif +], +[ +printf("hello Xext\n"); +], +kde_cv_have_libXext=yes, +kde_cv_have_libXext=no +) + +LDFLAGS=$kde_ldflags_safe +LIBS=$kde_libs_safe +]) + +AC_MSG_RESULT($kde_cv_have_libXext) + +if test "$kde_cv_have_libXext" = "no"; then + AC_MSG_ERROR([We need a working libXext to proceed. Since configure +can't find it itself, we stop here assuming that make wouldn't find +them either.]) +fi + +LIB_XEXT="-lXext" +QTE_NORTTI="" + +elif test "$kde_use_qt_emb" = "yes"; then + dnl We're using QT Embedded + CPPFLAGS=-DQWS + CXXFLAGS="$CXXFLAGS -fno-rtti" + QTE_NORTTI="-fno-rtti -DQWS" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +elif test "$kde_use_qt_mac" = "yes"; then + dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to + dnl be included to get the information) --Sam + CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" + CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +fi +AC_SUBST(X_PRE_LIBS) +AC_SUBST(LIB_X11) +AC_SUBST(LIB_XRENDER) +AC_SUBST(LIBSM) +AC_SUBST(X_INCLUDES) +AC_SUBST(X_LDFLAGS) +AC_SUBST(x_includes) +AC_SUBST(x_libraries) +AC_SUBST(QTE_NORTTI) +AC_SUBST(LIB_XEXT) + +]) + +AC_DEFUN([KDE_PRINT_QT_PROGRAM], +[ +AC_REQUIRE([KDE_USE_QT]) +cat > conftest.$ac_ext < +#include +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext < +#include +#include +EOF + +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <> conftest.$ac_ext < +#include +#include +EOF +fi + +echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext +cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC +fi + +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" +export LD_LIBRARY_PATH +LIBRARY_PATH="$ac_LIBRARY_PATH" +export LIBRARY_PATH +AC_LANG_RESTORE +]) + +if test "$kde_cv_qt_direct" = "yes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the Qt headers and libraries. +dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) +dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_1_3], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([KDE_USE_QT]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +dnl ------------------------------------------------------------------------ +dnl Add configure flag to enable linking to MT version of Qt library. +dnl ------------------------------------------------------------------------ + +AC_ARG_ENABLE( + mt, + AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), + kde_use_qt_mt=$enableval, + [ + if test $kde_qtver = 3; then + kde_use_qt_mt=yes + else + kde_use_qt_mt=no + fi + ] +) + +USING_QT_MT="" + +dnl ------------------------------------------------------------------------ +dnl If we not get --disable-qt-mt then adjust some vars for the host. +dnl ------------------------------------------------------------------------ + +KDE_MT_LDFLAGS= +KDE_MT_LIBS= +if test "x$kde_use_qt_mt" = "xyes"; then + KDE_CHECK_THREADING + if test "x$kde_use_threading" = "xyes"; then + CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" + KDE_MT_LDFLAGS="$USE_THREADS" + KDE_MT_LIBS="$LIBPTHREAD" + else + kde_use_qt_mt=no + fi +fi +AC_SUBST(KDE_MT_LDFLAGS) +AC_SUBST(KDE_MT_LIBS) + +kde_qt_was_given=yes + +dnl ------------------------------------------------------------------------ +dnl If we haven't been told how to link to Qt, we work it out for ourselves. +dnl ------------------------------------------------------------------------ +if test -z "$LIBQT_GLOB"; then + if test "x$kde_use_qt_emb" = "xyes"; then + LIBQT_GLOB="libqte.*" + else + LIBQT_GLOB="libqt.*" + fi +fi + +dnl ------------------------------------------------------------ +dnl If we got --enable-embedded then adjust the Qt library name. +dnl ------------------------------------------------------------ +if test "x$kde_use_qt_emb" = "xyes"; then + qtlib="qte" +else + qtlib="qt" +fi + +kde_int_qt="-l$qtlib" + +if test -z "$LIBQPE"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-palmtop then add -lqpe to the link line +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + if test "x$kde_use_qt_emb_palm" = "xyes"; then + LIB_QPE="-lqpe" + else + LIB_QPE="" + fi + else + LIB_QPE="" + fi +fi + +dnl ------------------------------------------------------------------------ +dnl If we got --enable-qt-mt then adjust the Qt library name for the host. +dnl ------------------------------------------------------------------------ + +if test "x$kde_use_qt_mt" = "xyes"; then + LIBQT="-l$qtlib-mt" + kde_int_qt="-l$qtlib-mt" + LIBQT_GLOB="lib$qtlib-mt.*" + USING_QT_MT="using -mt" +else + LIBQT="-l$qtlib" +fi + +if test $kde_qtver != 1; then + + AC_REQUIRE([AC_FIND_PNG]) + AC_REQUIRE([AC_FIND_JPEG]) + LIBQT="$LIBQT $LIBPNG $LIBJPEG" +fi + +if test $kde_qtver = 3; then + AC_REQUIRE([KDE_CHECK_LIBDL]) + LIBQT="$LIBQT $LIBDL" +fi + +AC_MSG_CHECKING([for Qt]) + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" +fi +ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO +qt_libraries="" +qt_includes="" +AC_ARG_WITH(qt-dir, + AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), + [ ac_qt_includes="$withval"/include + ac_qt_libraries="$withval"/lib${kdelibsuff} + ac_qt_bindir="$withval"/bin + ]) + +AC_ARG_WITH(qt-includes, + AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), + [ + ac_qt_includes="$withval" + ]) + +kde_qt_libs_given=no + +AC_ARG_WITH(qt-libraries, + AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), + [ ac_qt_libraries="$withval" + kde_qt_libs_given=yes + ]) + +AC_CACHE_VAL(ac_cv_have_qt, +[#try to guess Qt locations + +qt_incdirs="" +for dir in $kde_qt_dirs; do + qt_incdirs="$qt_incdirs $dir/include $dir" +done +qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" +if test ! "$ac_qt_includes" = "NO"; then + qt_incdirs="$ac_qt_includes $qt_incdirs" +fi + +if test "$kde_qtver" != "1"; then + kde_qt_header=qstyle.h +else + kde_qt_header=qglobal.h +fi + +AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) +ac_qt_includes="$qt_incdir" + +qt_libdirs="" +for dir in $kde_qt_dirs; do + qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" +done +qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" +if test ! "$ac_qt_libraries" = "NO"; then + qt_libdir=$ac_qt_libraries +else + qt_libdirs="$ac_qt_libraries $qt_libdirs" + # if the Qt was given, the chance is too big that libqt.* doesn't exist + qt_libdir=NONE + for dir in $qt_libdirs; do + try="ls -1 $dir/${LIBQT_GLOB}" + if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done +fi +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIBQT="$LIBQT ${kde_int_qt}_incremental" + break + fi +done + +ac_qt_libraries="$qt_libdir" + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" +LIBS="$LIBS $LIBQT $KDE_MT_LIBS" + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC + ac_qt_libraries="NO" +fi +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +AC_LANG_RESTORE +if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then + ac_cv_have_qt="have_qt=no" + ac_qt_notfound="" + missing_qt_mt="" + if test "$ac_qt_includes" = NO; then + if test "$ac_qt_libraries" = NO; then + ac_qt_notfound="(headers and libraries)"; + else + ac_qt_notfound="(headers)"; + fi + else + if test "x$kde_use_qt_mt" = "xyes"; then + missing_qt_mt=" +Make sure that you have compiled Qt with thread support!" + ac_qt_notfound="(library $qtlib-mt)"; + else + ac_qt_notfound="(library $qtlib)"; + fi + fi + + AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! +For more details about this problem, look at the end of config.log.$missing_qt_mt]) +else + have_qt="yes" +fi +]) + +eval "$ac_cv_have_qt" + +if test "$have_qt" != yes; then + AC_MSG_RESULT([$have_qt]); +else + ac_cv_have_qt="have_qt=yes \ + ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" + AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) + + qt_libraries="$ac_qt_libraries" + qt_includes="$ac_qt_includes" +fi + +if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then + KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) +fi + +AC_SUBST(qt_libraries) +AC_SUBST(qt_includes) + +if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then + QT_INCLUDES="" +else + QT_INCLUDES="-I$qt_includes" + all_includes="$QT_INCLUDES $all_includes" +fi + +if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then + QT_LDFLAGS="" +else + QT_LDFLAGS="-L$qt_libraries" + all_libraries="$QT_LDFLAGS $all_libraries" +fi +test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" + +AC_SUBST(QT_INCLUDES) +AC_SUBST(QT_LDFLAGS) +AC_PATH_QT_MOC_UIC + +KDE_CHECK_QT_JPEG + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' +else +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' +fi +test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIB_QT="$LIB_QT ${kde_int_qt}_incremental" + break + fi +done + +AC_SUBST(LIB_QT) +AC_SUBST(LIB_QPE) + +AC_SUBST(kde_qtver) +]) + +AC_DEFUN([AC_PATH_QT], +[ +AC_PATH_QT_1_3 +]) + +AC_DEFUN([KDE_CHECK_UIC_PLUGINS], +[ +AC_REQUIRE([AC_PATH_QT_MOC_UIC]) + +if test x$ac_uic_supports_libpath = xyes; then + +AC_MSG_CHECKING([if UIC has KDE plugins available]) +AC_CACHE_VAL(kde_cv_uic_plugins, +[ +cat > actest.ui << EOF + +NewConnectionDialog + + + + testInput + + + + +EOF + + + +kde_cv_uic_plugins=no +kde_line="$UIC_PATH -L $kde_widgetdir" +if test x$ac_uic_supports_nounload = xyes; then + kde_line="$kde_line -nounload" +fi +kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" +if AC_TRY_EVAL(kde_line); then + # if you're trying to debug this check and think it's incorrect, + # better check your installation. The check _is_ correct - your + # installation is not. + if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then + kde_cv_uic_plugins=yes + fi +fi +rm -f actest.ui actest.cpp +]) + +AC_MSG_RESULT([$kde_cv_uic_plugins]) +if test "$kde_cv_uic_plugins" != yes; then + AC_MSG_ERROR([ +you need to install kdelibs first. + +If you did install kdelibs, then the Qt version that is picked up by +this configure is not the same version you used to compile kdelibs. +The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the +_same Qt version_, compiled with the _same compiler_ and the same Qt +configuration settings. +]) +fi +fi +]) + +AC_DEFUN([KDE_CHECK_FINAL], +[ + AC_ARG_ENABLE(final, + AC_HELP_STRING([--enable-final], + [build size optimized apps (experimental - needs lots of memory)]), + kde_use_final=$enableval, kde_use_final=no) + + if test "x$kde_use_final" = "xyes"; then + KDE_USE_FINAL_TRUE="" + KDE_USE_FINAL_FALSE="#" + else + KDE_USE_FINAL_TRUE="#" + KDE_USE_FINAL_FALSE="" + fi + AC_SUBST(KDE_USE_FINAL_TRUE) + AC_SUBST(KDE_USE_FINAL_FALSE) +]) + +AC_DEFUN([KDE_CHECK_CLOSURE], +[ + AC_ARG_ENABLE(closure, + AC_HELP_STRING([--enable-closure],[delay template instantiation]), + kde_use_closure=$enableval, kde_use_closure=no) + + KDE_NO_UNDEFINED="" + if test "x$kde_use_closure" = "xyes"; then + KDE_USE_CLOSURE_TRUE="" + KDE_USE_CLOSURE_FALSE="#" +# CXXFLAGS="$CXXFLAGS $REPO" + else + KDE_USE_CLOSURE_TRUE="#" + KDE_USE_CLOSURE_FALSE="" + KDE_NO_UNDEFINED="" + case $host in + *-*-linux-gnu) + KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], + [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], + [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], + [KDE_NO_UNDEFINED=""])], + [KDE_NO_UNDEFINED=""]) + ;; + esac + fi + AC_SUBST(KDE_USE_CLOSURE_TRUE) + AC_SUBST(KDE_USE_CLOSURE_FALSE) + AC_SUBST(KDE_NO_UNDEFINED) +]) + +dnl Check if the linker supports --enable-new-dtags and --as-needed +AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], +[ + AC_ARG_ENABLE(new_ldflags, + AC_HELP_STRING([--enable-new-ldflags], + [enable the new linker flags]), + kde_use_new_ldflags=$enableval, + kde_use_new_ldflags=no) + + LDFLAGS_AS_NEEDED="" + LDFLAGS_NEW_DTAGS="" + if test "x$kde_use_new_ldflags" = "xyes"; then + LDFLAGS_NEW_DTAGS="" + KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], + [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) + + KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], + [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) + fi + AC_SUBST(LDFLAGS_AS_NEEDED) + AC_SUBST(LDFLAGS_NEW_DTAGS) +]) + +AC_DEFUN([KDE_CHECK_NMCHECK], +[ + AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), + kde_use_nmcheck=$enableval, kde_use_nmcheck=no) + + if test "$kde_use_nmcheck" = "yes"; then + KDE_USE_NMCHECK_TRUE="" + KDE_USE_NMCHECK_FALSE="#" + else + KDE_USE_NMCHECK_TRUE="#" + KDE_USE_NMCHECK_FALSE="" + fi + AC_SUBST(KDE_USE_NMCHECK_TRUE) + AC_SUBST(KDE_USE_NMCHECK_FALSE) +]) + +AC_DEFUN([KDE_EXPAND_MAKEVAR], [ +savex=$exec_prefix +test "x$exec_prefix" = xNONE && exec_prefix=$prefix +tmp=$$2 +while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done +exec_prefix=$savex +]) + +dnl ------------------------------------------------------------------------ +dnl Now, the same with KDE +dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) +dnl and $(kde_includes) will be the kdehdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_BASE_PATH_KDE], +[ +AC_REQUIRE([KDE_CHECK_STL]) +AC_REQUIRE([AC_PATH_QT])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_CHECK_RPATH +AC_MSG_CHECKING([for KDE]) + +if test "${prefix}" != NONE; then + kde_includes=${includedir} + KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) + + kde_libraries=${libdir} + KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) + +else + ac_kde_includes= + ac_kde_libraries= + kde_libraries="" + kde_includes="" +fi + +AC_CACHE_VAL(ac_cv_have_kde, +[#try to guess kde locations + +if test "$kde_qtver" = 1; then + kde_check_header="ksock.h" + kde_check_lib="libkdecore.la" +else + kde_check_header="ksharedptr.h" + kde_check_lib="libkio.la" +fi + +if test -z "$1"; then + +kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" +test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" +kde_incdirs="$ac_kde_includes $kde_incdirs" +AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) +ac_kde_includes="$kde_incdir" + +if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then + AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE headers installed. This will fail. +So, check this please and use another prefix!]) +fi + +kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" +test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" +kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" +AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) +ac_kde_libraries="$kde_libdir" + +kde_widgetdir=NO +dnl this might be somewhere else +AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) + +if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then +AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE libraries installed. This will fail. +So, check this please and use another prefix!]) +fi + +if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then +AC_MSG_ERROR([ +I can't find the designer plugins. These are required and should have been installed +by kdelibs]) +fi + +if test -n "$kde_widgetdir"; then + kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" +fi + + +if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then + ac_cv_have_kde="have_kde=no" +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" +fi + +else dnl test -z $1, e.g. from kdelibs + + ac_cv_have_kde="have_kde=no" + +fi +])dnl + +eval "$ac_cv_have_kde" + +if test "$have_kde" != "yes"; then + if test "${prefix}" = NONE; then + ac_kde_prefix="$ac_default_prefix" + else + ac_kde_prefix="$prefix" + fi + if test "$exec_prefix" = NONE; then + ac_kde_exec_prefix="$ac_kde_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix]) + else + ac_kde_exec_prefix="$exec_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) + fi + + kde_libraries="${libdir}" + kde_includes="${includedir}" + +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" + AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) + + kde_libraries="$ac_kde_libraries" + kde_includes="$ac_kde_includes" +fi +AC_SUBST(kde_libraries) +AC_SUBST(kde_includes) + +if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then + KDE_INCLUDES="" +else + KDE_INCLUDES="-I$kde_includes" + all_includes="$KDE_INCLUDES $all_includes" +fi + +KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" + +KDE_LDFLAGS="-L$kde_libraries" +if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then + all_libraries="$KDE_LDFLAGS $all_libraries" +fi + +AC_SUBST(KDE_LDFLAGS) +AC_SUBST(KDE_INCLUDES) + +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +all_libraries="$all_libraries $USER_LDFLAGS" +all_includes="$all_includes $USER_INCLUDES" +AC_SUBST(all_includes) +AC_SUBST(all_libraries) + +if test -z "$1"; then +KDE_CHECK_UIC_PLUGINS +fi + +ac_kde_libraries="$kde_libdir" + +AC_SUBST(AUTODIRS) + + +]) + +AC_DEFUN([KDE_CHECK_EXTRA_LIBS], +[ +AC_MSG_CHECKING(for extra includes) +AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), + kde_use_extra_includes="$withval", + kde_use_extra_includes=NONE +) +kde_extra_includes= +if test -n "$kde_use_extra_includes" && \ + test "$kde_use_extra_includes" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_includes; do + kde_extra_includes="$kde_extra_includes $dir" + USER_INCLUDES="$USER_INCLUDES -I$dir" + done + IFS=$ac_save_ifs + kde_use_extra_includes="added" +else + kde_use_extra_includes="no" +fi +AC_SUBST(USER_INCLUDES) + +AC_MSG_RESULT($kde_use_extra_includes) + +kde_extra_libs= +AC_MSG_CHECKING(for extra libs) +AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), + kde_use_extra_libs=$withval, + kde_use_extra_libs=NONE +) +if test -n "$kde_use_extra_libs" && \ + test "$kde_use_extra_libs" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_libs; do + kde_extra_libs="$kde_extra_libs $dir" + KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" + USER_LDFLAGS="$USER_LDFLAGS -L$dir" + done + IFS=$ac_save_ifs + kde_use_extra_libs="added" +else + kde_use_extra_libs="no" +fi + +AC_SUBST(USER_LDFLAGS) + +AC_MSG_RESULT($kde_use_extra_libs) + +]) + +AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], +[ + AC_MSG_CHECKING([for KDE headers installed]) + AC_LANG_SAVE + AC_LANG_CPLUSPLUS +cat > conftest.$ac_ext < +#endif +#include +#include "confdefs.h" +#include + +int main() { + printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); + printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); + printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); + printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); + printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); + printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); + printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); + printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); + printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); + printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); + printf("kde_wallpaperdir=\\"%s\\"\n", + KApplication::kde_wallpaperdir().data()); + printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); + printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); + printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); + printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); + printf("kde_moduledir=\\"/tmp/dummy\\"\n"); + printf("kde_styledir=\\"/tmp/dummy\\"\n"); + printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); + printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); + printf("xdg_menudir=\\"/tmp/dummy\\"\n"); + printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); + printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); + return 0; + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$all_includes $CPPFLAGS" + if AC_TRY_EVAL(ac_compile); then + AC_MSG_RESULT(yes) + else + AC_MSG_ERROR([your system is not able to compile a small KDE application! +Check, if you installed the KDE header files correctly. +For more details about this problem, look at the end of config.log.]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_KDEQTADDON], +[ +AC_MSG_CHECKING(for kde-qt-addon) +AC_CACHE_VAL(kde_cv_have_kdeqtaddon, +[ + kde_ldflags_safe="$LDFLAGS" + kde_libs_safe="$LIBS" + kde_cxxflags_safe="$CXXFLAGS" + + LIBS="-lkde-qt-addon $LIBQT $LIBS" + CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" + LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" + + AC_TRY_LINK([ + #include + ], + [ + QDomDocument doc; + ], + kde_cv_have_kdeqtaddon=yes, + kde_cv_have_kdeqtaddon=no + ) + + LDFLAGS=$kde_ldflags_safe + LIBS=$kde_libs_safe + CXXFLAGS=$kde_cxxflags_safe +]) + +AC_MSG_RESULT($kde_cv_have_kdeqtaddon) + +if test "$kde_cv_have_kdeqtaddon" = "no"; then + AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. +It is a separate package (and CVS module) named kde-qt-addon.]) +fi +]) + +AC_DEFUN([KDE_CREATE_LIBS_ALIASES], +[ + AC_REQUIRE([KDE_MISC_TESTS]) + AC_REQUIRE([KDE_CHECK_LIBDL]) + AC_REQUIRE([K_PATH_X]) + +if test $kde_qtver = 3; then + case $host in + *cygwin*) lib_kded="-lkdeinit_kded" ;; + *) lib_kded="" ;; + esac + AC_SUBST(LIB_KDED, $lib_kded) + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KJS, "-lkjs") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KABC, "-lkabc") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") + AC_SUBST(LIB_KUTILS, "-lkutils") + AC_SUBST(LIB_KDEPIM, "-lkdepim") + AC_SUBST(LIB_KIMPROXY, "-lkimproxy") + AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") + AC_SUBST(LIB_KDNSSD, "-lkdnssd") + AC_SUBST(LIB_KUNITTEST, "-lkunittest") +# these are for backward compatibility + AC_SUBST(LIB_KSYCOCA, "-lkio") + AC_SUBST(LIB_KFILE, "-lkio") +elif test $kde_qtver = 2; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KSYCOCA, "-lksycoca") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KFILE, "-lkfile") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") +else + AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") + AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") + AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") + AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") + AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") +fi +]) + +AC_DEFUN([AC_PATH_KDE], +[ + AC_BASE_PATH_KDE + AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), + [ + if test "$enableval" = "no"; + then ac_use_path_checking="default" + else ac_use_path_checking="" + fi + ], + [ + if test "$kde_qtver" = 1; + then ac_use_path_checking="" + else ac_use_path_checking="default" + fi + ] + ) + + AC_CREATE_KFSSTND($ac_use_path_checking) + + AC_SUBST_KFSSTND + KDE_CREATE_LIBS_ALIASES +]) + +dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) +AC_DEFUN([KDE_CHECK_FUNC_EXT], +[ +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(kde_cv_func_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +save_CXXFLAGS="$CXXFLAGS" +kde_safe_LIBS="$LIBS" +LIBS="$LIBS $X_EXTRA_LIBS" +if test "$GXX" = "yes"; then +CXXFLAGS="$CXXFLAGS -pedantic-errors" +fi +AC_TRY_COMPILE([ +$2 +], +[ +$3 +], +kde_cv_func_$1=yes, +kde_cv_func_$1=no) +CXXFLAGS="$save_CXXFLAGS" +LIBS="$kde_safe_LIBS" +AC_LANG_RESTORE +]) + +AC_MSG_RESULT($kde_cv_func_$1) + +AC_MSG_CHECKING([if $1 needs custom prototype]) +AC_CACHE_VAL(kde_cv_proto_$1, +[ +if test "x$kde_cv_func_$1" = xyes; then + kde_cv_proto_$1=no +else + case "$1" in + setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) + kde_cv_proto_$1="yes - in libkdefakes" + ;; + *) + kde_cv_proto_$1=unknown + ;; + esac +fi + +if test "x$kde_cv_proto_$1" = xunknown; then + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + kde_safe_libs=$LIBS + LIBS="$LIBS $X_EXTRA_LIBS" + AC_TRY_LINK([ +$2 + +extern "C" $4; +], +[ +$3 +], +[ kde_cv_func_$1=yes + kde_cv_proto_$1=yes ], + [kde_cv_proto_$1="$1 unavailable"] +) +LIBS=$kde_safe_libs +AC_LANG_RESTORE +fi +]) +AC_MSG_RESULT($kde_cv_proto_$1) + +if test "x$kde_cv_func_$1" = xyes; then + AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) + $6 +fi +if test "x$kde_cv_proto_$1" = xno; then + AC_DEFINE(HAVE_$5_PROTO, 1, + [Define if you have the $1 prototype]) +fi + +AH_VERBATIM([_HAVE_$5_PROTO], +[ +#if !defined(HAVE_$5_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +$4; +#ifdef __cplusplus +} +#endif +#endif +]) +]) + +AC_DEFUN([AC_CHECK_SETENV], +[ + KDE_CHECK_FUNC_EXT(setenv, [ +#include +], + [setenv("VAR", "VALUE", 1);], + [int setenv (const char *, const char *, int)], + [SETENV]) +]) + +AC_DEFUN([AC_CHECK_UNSETENV], +[ + KDE_CHECK_FUNC_EXT(unsetenv, [ +#include +], + [unsetenv("VAR");], + [void unsetenv (const char *)], + [UNSETENV]) +]) + +AC_DEFUN([AC_CHECK_GETDOMAINNAME], +[ + KDE_CHECK_FUNC_EXT(getdomainname, [ +#include +#include +#include +], + [ +char buffer[200]; +getdomainname(buffer, 200); +], + [#include + int getdomainname (char *, size_t)], + [GETDOMAINNAME]) +]) + +AC_DEFUN([AC_CHECK_GETHOSTNAME], +[ + KDE_CHECK_FUNC_EXT(gethostname, [ +#include +#include +], + [ +char buffer[200]; +gethostname(buffer, 200); +], + [int gethostname (char *, unsigned int)], + [GETHOSTNAME]) +]) + +AC_DEFUN([AC_CHECK_USLEEP], +[ + KDE_CHECK_FUNC_EXT(usleep, [ +#include +], + [ +usleep(200); +], + [int usleep (unsigned int)], + [USLEEP]) +]) + + +AC_DEFUN([AC_CHECK_RANDOM], +[ + KDE_CHECK_FUNC_EXT(random, [ +#include +], + [ +random(); +], + [long int random(void)], + [RANDOM]) + + KDE_CHECK_FUNC_EXT(srandom, [ +#include +], + [ +srandom(27); +], + [void srandom(unsigned int)], + [SRANDOM]) + +]) + +AC_DEFUN([AC_CHECK_INITGROUPS], +[ + KDE_CHECK_FUNC_EXT(initgroups, [ +#include +#include +#include +], + [ +char buffer[200]; +initgroups(buffer, 27); +], + [int initgroups(const char *, gid_t)], + [INITGROUPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMPS], +[ + KDE_CHECK_FUNC_EXT(mkstemps, [ +#include +#include +], + [ +mkstemps("/tmp/aaaXXXXXX", 6); +], + [int mkstemps(char *, int)], + [MKSTEMPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMP], +[ + KDE_CHECK_FUNC_EXT(mkstemp, [ +#include +#include +], + [ +mkstemp("/tmp/aaaXXXXXX"); +], + [int mkstemp(char *)], + [MKSTEMP]) +]) + +AC_DEFUN([AC_CHECK_MKDTEMP], +[ + KDE_CHECK_FUNC_EXT(mkdtemp, [ +#include +#include +], + [ +mkdtemp("/tmp/aaaXXXXXX"); +], + [char *mkdtemp(char *)], + [MKDTEMP]) +]) + + +AC_DEFUN([AC_CHECK_RES_INIT], +[ + AC_MSG_CHECKING([if res_init needs -lresolv]) + kde_libs_safe="$LIBS" + LIBS="$LIBS $X_EXTRA_LIBS -lresolv" + AC_TRY_LINK( + [ +#include +#include +#include +#include + ], + [ + res_init(); + ], + [ + LIBRESOLV="-lresolv" + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) + LIBS=$kde_libs_safe + AC_SUBST(LIBRESOLV) + + KDE_CHECK_FUNC_EXT(res_init, + [ +#include +#include +#include +#include + ], + [res_init()], + [int res_init(void)], + [RES_INIT]) +]) + +AC_DEFUN([AC_CHECK_STRLCPY], +[ + KDE_CHECK_FUNC_EXT(strlcpy, [ +#include +], +[ char buf[20]; + strlcpy(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcpy(char*, const char*, unsigned long)], + [STRLCPY]) +]) + +AC_DEFUN([AC_CHECK_STRLCAT], +[ + KDE_CHECK_FUNC_EXT(strlcat, [ +#include +], +[ char buf[20]; + buf[0]='\0'; + strlcat(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcat(char*, const char*, unsigned long)], + [STRLCAT]) +]) + +AC_DEFUN([AC_CHECK_RES_QUERY], +[ + KDE_CHECK_FUNC_EXT(res_query, [ +#include +#include +#include +#include +#include +], +[ +res_query(NULL, 0, 0, NULL, 0); +], + [int res_query(const char *, int, int, unsigned char *, int)], + [RES_QUERY]) +]) + +AC_DEFUN([AC_CHECK_DN_SKIPNAME], +[ + KDE_CHECK_FUNC_EXT(dn_skipname, [ +#include +#include +#include +#include +], +[ +dn_skipname (NULL, NULL); +], + [int dn_skipname (unsigned char *, unsigned char *)], + [DN_SKIPNAME]) +]) + + +AC_DEFUN([AC_FIND_GIF], + [AC_MSG_CHECKING([for giflib]) +AC_CACHE_VAL(ac_cv_lib_gif, +[ac_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" +else +LIBS="$all_libraries -lgif" +fi +AC_TRY_LINK(dnl +[ +#ifdef __cplusplus +extern "C" { +#endif +int GifLastError(void); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [return GifLastError();], + eval "ac_cv_lib_gif=yes", + eval "ac_cv_lib_gif=no") +LIBS="$ac_save_LIBS" +])dnl +if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) +else + AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) +fi +]) + +AC_DEFUN([KDE_FIND_JPEG_HELPER], +[ +AC_MSG_CHECKING([for libjpeg$2]) +AC_CACHE_VAL(ac_cv_lib_jpeg_$1, +[ +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" +ac_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[ +#ifdef __cplusplus +extern "C" { +#endif +void jpeg_CreateDecompress(); +#ifdef __cplusplus +} +#endif +], +[jpeg_CreateDecompress();], + eval "ac_cv_lib_jpeg_$1=-ljpeg$2", + eval "ac_cv_lib_jpeg_$1=no") +LIBS="$ac_save_LIBS" +CFLAGS="$ac_save_CFLAGS" +]) + +if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then + LIBJPEG="$ac_cv_lib_jpeg_$1" + AC_MSG_RESULT($ac_cv_lib_jpeg_$1) +else + AC_MSG_RESULT(no) + $3 +fi + +]) + +AC_DEFUN([AC_FIND_JPEG], +[ +dnl first look for libraries +KDE_FIND_JPEG_HELPER(6b, 6b, + KDE_FIND_JPEG_HELPER(normal, [], + [ + LIBJPEG= + ] + ) +) + +dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h +dnl requires system dependent includes loaded before it) +jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" +AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) +test "x$jpeg_incdir" = xNO && jpeg_incdir= + +dnl if headers _and_ libraries are missing, this is no error, and we +dnl continue with a warning (the user will get no jpeg support in khtml) +dnl if only one is missing, it means a configuration error, but we still +dnl only warn +if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then + AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) +else + if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then + AC_MSG_WARN([ +There is an installation error in jpeg support. You seem to have only one +of either the headers _or_ the libraries installed. You may need to either +provide correct --with-extra-... options, or the development package of +libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ +Disabling JPEG support. +]) + else + AC_MSG_WARN([libjpeg not found. disable JPEG support.]) + fi + jpeg_incdir= + LIBJPEG= +fi + +AC_SUBST(LIBJPEG) +AH_VERBATIM(_AC_CHECK_JPEG, +[/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif +]) +]) + +AC_DEFUN([KDE_CHECK_QT_JPEG], +[ +if test -n "$LIBJPEG"; then +AC_MSG_CHECKING([if Qt needs $LIBJPEG]) +AC_CACHE_VAL(kde_cv_qt_jpeg, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS $LIBQT" +LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` +ac_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[#include ], + [ + int argc; + char** argv; + QApplication app(argc, argv);], + eval "kde_cv_qt_jpeg=no", + eval "kde_cv_qt_jpeg=yes") +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +fi +]) + +if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then + AC_MSG_RESULT(yes) + LIBJPEG_QT='$(LIBJPEG)' +else + AC_MSG_RESULT(no) + LIBJPEG_QT= +fi + +]) + +AC_DEFUN([AC_FIND_ZLIB], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for libz]) +AC_CACHE_VAL(ac_cv_lib_z, +[ +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#include +], +[ + char buf[42]; + gzFile f = (gzFile) 0; + /* this would segfault.. but we only link, don't run */ + (void) gzgets(f, buf, sizeof(buf)); + + return (zlibVersion() == ZLIB_VERSION); +], + eval "ac_cv_lib_z='-lz'", + eval "ac_cv_lib_z=no") +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if test ! "$ac_cv_lib_z" = no; then + AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) + LIBZ="$ac_cv_lib_z" + AC_MSG_RESULT($ac_cv_lib_z) +else + AC_MSG_ERROR(not found. + Possibly configure picks up an outdated version + installed by XFree86. Remove it from your system. + + Check your installation and look into config.log) + LIBZ="" +fi +AC_SUBST(LIBZ) +]) + +AC_DEFUN([KDE_TRY_TIFFLIB], +[ +AC_MSG_CHECKING([for libtiff $1]) + +AC_CACHE_VAL(kde_cv_libtiff_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" +else +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" +fi +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl +[ +#include +], + [return (TIFFOpen( "", "r") == 0); ], +[ + kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" +], [ + kde_cv_libtiff_$1=no +]) + +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +]) + +if test "$kde_cv_libtiff_$1" = "no"; then + AC_MSG_RESULT(no) + LIBTIFF="" + $3 +else + LIBTIFF="$kde_cv_libtiff_$1" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) + $2 +fi + +]) + +AC_DEFUN([AC_FIND_TIFF], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +KDE_TRY_TIFFLIB(tiff, [], + KDE_TRY_TIFFLIB(tiff34)) + +AC_SUBST(LIBTIFF) +]) + +AC_DEFUN([KDE_FIND_LIBEXR], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_CACHE_VAL(ac_cv_libexr, +[ + if test -z "$PKG_CONFIG"; then + AC_PATH_PROG(PKG_CONFIG, pkg-config, no) + fi + + AC_MSG_CHECKING([for OpenEXR libraries]) + + if test "$PKG_CONFIG" = "no" ; then + AC_MSG_RESULT(no) + echo "*** The pkg-config script could not be found. Make sure it is" + echo "*** in your path, or set the PKG_CONFIG environment variable" + echo "*** to the full path to pkg-config." + echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." + else + if !(`$PKG_CONFIG --exists OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=no + else + if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then + AC_MSG_RESULT(no) + EXRSTATUS=old + else + kde_save_LIBS="$LIBS" + LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_CXXFLAGS="$CXXFLAGS" + EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` + CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" + + AC_TRY_LINK(dnl + [ + #include + ], + [ + using namespace Imf; + RgbaInputFile file ("dummy"); + return 0; + ], + eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", + eval "ac_cv_libexr=no" + ) + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) + LIB_EXR="$ac_cv_libexr" + AC_MSG_RESULT($ac_cv_libexr) + else + AC_MSG_RESULT(no) + LIB_EXR="" + fi + fi + fi + fi + AC_SUBST(LIB_EXR) + AC_SUBST(EXR_FLAGS) +]) + + + +AC_DEFUN([AC_FIND_PNG], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_MSG_CHECKING([for libpng]) +AC_CACHE_VAL(ac_cv_lib_png, +[ +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" +else +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" +fi +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + png_structp png_ptr = png_create_read_struct( /* image ptr */ + PNG_LIBPNG_VER_STRING, 0, 0, 0 ); + return( png_ptr != 0 ); + ], + eval "ac_cv_lib_png='-lpng $LIBZ -lm'", + eval "ac_cv_lib_png=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) + LIBPNG="$ac_cv_lib_png" + AC_SUBST(LIBPNG) + AC_MSG_RESULT($ac_cv_lib_png) +else + AC_MSG_RESULT(no) + LIBPNG="" + AC_SUBST(LIBPNG) +fi +]) + + +AC_DEFUN([AC_FIND_JASPER], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_MSG_CHECKING([for jasper]) +AC_CACHE_VAL(ac_cv_jasper, +[ +kde_save_LIBS="$LIBS" +LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + return( jas_init() ); + ], + eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", + eval "ac_cv_jasper=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) + LIB_JASPER="$ac_cv_jasper" + AC_MSG_RESULT($ac_cv_jasper) +else + AC_MSG_RESULT(no) + LIB_JASPER="" +fi +AC_SUBST(LIB_JASPER) +]) + +AC_DEFUN([AC_CHECK_BOOL], +[ + AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) +]) + +AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], +[ +AC_MSG_CHECKING(if you need GNU extensions) +AC_CACHE_VAL(ac_cv_gnu_extensions, +[ +cat > conftest.c << EOF +#include + +#ifdef __GNU_LIBRARY__ +yes +#endif +EOF + +if (eval "$ac_cpp conftest.c") 2>&5 | + egrep "yes" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_gnu_extensions=yes +else + ac_cv_gnu_extensions=no +fi +]) + +AC_MSG_RESULT($ac_cv_gnu_extensions) +if test "$ac_cv_gnu_extensions" = "yes"; then + AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) +fi +]) + +AC_DEFUN([KDE_CHECK_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CXX supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) + CXXFLAGS="$save_CXXFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + +AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CC supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_C + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) + CFLAGS="$save_CFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + + +dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables +dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) +dnl it's all white-space separated +AC_DEFUN([AC_REMOVE_FORBIDDEN], +[ __val=$$1 + __forbid=" $2 " + if test -n "$__val"; then + __new="" + ac_save_IFS=$IFS + IFS=" " + for i in $__val; do + case "$__forbid" in + *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; + *) # Careful to not add spaces, where there were none, because otherwise + # libtool gets confused, if we change e.g. CXX + if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; + esac + done + IFS=$ac_save_IFS + $1=$__new + fi +]) + + +AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], +[ + AC_MSG_CHECKING([whether $CC is blacklisted]) + + dnl In theory we have tu run this test against $CC and $CXX + dnl in C and in C++ mode, because its perfectly legal for + dnl the user to mix compiler versions, since C has a defined + dnl ABI. + dnl + dnl For now, we assume the user is not on crack. + + AC_TRY_COMPILE([ +#ifdef __GNUC__ +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 +choke me +#endif +#endif +], , + kde_bad_compiler=no, + kde_bad_compiler=yes +) + + AC_MSG_RESULT($kde_bad_compiler) + +if test "$kde_bad_compiler" = "yes"; then + AC_MSG_ERROR([ + +This particular compiler version is blacklisted because it +is known to miscompile KDE. Please use a newer version, or +if that is not yet available, choose an older version. + +Please do not report a bug or bother us reporting this +configure error. We know about it, and we introduced +it by intention to avoid untraceable bugs or crashes in KDE. + +]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], +[ + AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], + kde_cv_opt_noinline_match, + [ + kde_cv_opt_noinline_match=irrelevant + dnl if we don't use both -O2 and -fno-inline, this check is moot + if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ + && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then + + ac_cflags_save="$CFLAGS" + CFLAGS="$CFLAGS -D_USE_GNU" + + AC_TRY_LINK([ + #include +], [ const char *pt, *et; + et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; +], + kde_cv_opt_noinline_match=yes, + kde_cv_opt_noinline_match=no + ) + + CFLAGS="$ac_cflags_save" + fi + ]) +]) + + +dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given +AC_DEFUN([AC_VALIDIFY_CXXFLAGS], +[dnl +if test "x$kde_use_qt_emb" != "xyes"; then + AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) +else + AC_REMOVE_FORBIDDEN(CXX, [-rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) +fi +]) + +AC_DEFUN([AC_CHECK_COMPILERS], +[ + AC_ARG_ENABLE(debug, + AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), + [ + case $enableval in + yes) + kde_use_debug_code="yes" + kde_use_debug_define=no + ;; + full) + kde_use_debug_code="full" + kde_use_debug_define=no + ;; + *) + kde_use_debug_code="no" + kde_use_debug_define=yes + ;; + esac + ], + [kde_use_debug_code="no" + kde_use_debug_define=no + ]) + + dnl Just for configure --help + AC_ARG_ENABLE(dummyoption, + AC_HELP_STRING([--disable-debug], + [disables debug output and debug symbols [default=no]]), + [],[]) + + AC_ARG_ENABLE(strict, + AC_HELP_STRING([--enable-strict], + [compiles with strict compiler options (may not work!)]), + [ + if test $enableval = "no"; then + kde_use_strict_options="no" + else + kde_use_strict_options="yes" + fi + ], [kde_use_strict_options="no"]) + + AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), + [ + if test $enableval = "no"; then + kde_use_warnings="no" + else + kde_use_warnings="yes" + fi + ], [kde_use_warnings="yes"]) + + dnl enable warnings for debug build + if test "$kde_use_debug_code" != "no"; then + kde_use_warnings=yes + fi + + AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), + [kde_use_profiling=$enableval], + [kde_use_profiling="no"] + ) + + dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS + CFLAGS=" $CFLAGS" + + AC_PROG_CC + + AC_PROG_CPP + + if test "$GCC" = "yes"; then + if test "$kde_use_debug_code" != "no"; then + if test $kde_use_debug_code = "full"; then + CFLAGS="-g3 -fno-inline $CFLAGS" + else + CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" + fi + else + CFLAGS="-O2 $CFLAGS" + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CFLAGS="-DNDEBUG $CFLAGS" + fi + + + case "$host" in + *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; + *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; + esac + + if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then + LDFLAGS="" + fi + + CXXFLAGS=" $CXXFLAGS" + + AC_PROG_CXX + + KDE_CHECK_FOR_BAD_COMPILER + + if test "$GXX" = "yes" || test "$CXX" = "KCC"; then + if test "$kde_use_debug_code" != "no"; then + if test "$CXX" = "KCC"; then + CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + else + if test "$kde_use_debug_code" = "full"; then + CXXFLAGS="-g3 -fno-inline $CXXFLAGS" + else + CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" + fi + fi + KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) + + dnl convenience compiler flags + KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) + AC_SUBST(WOVERLOADED_VIRTUAL) + else + if test "$CXX" = "KCC"; then + CXXFLAGS="+K3 $CXXFLAGS" + else + CXXFLAGS="-O2 $CXXFLAGS" + fi + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" + fi + + if test "$kde_use_profiling" = "yes"; then + KDE_CHECK_COMPILER_FLAG(pg, + [ + CFLAGS="-pg $CFLAGS" + CXXFLAGS="-pg $CXXFLAGS" + ]) + fi + + if test "$kde_use_warnings" = "yes"; then + if test "$GCC" = "yes"; then + CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" + case $host in + *-*-linux-gnu) + CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" + CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" + KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) + KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) + ;; + esac + KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) + dnl ### FIXME: revert for KDE 4 + KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) + fi + fi + + if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then + CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" + fi + + AC_ARG_ENABLE(pch, + AC_HELP_STRING([--enable-pch], + [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), + [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) + + HAVE_GCC_VISIBILITY=0 + AC_SUBST([HAVE_GCC_VISIBILITY]) + + if test "$GXX" = "yes"; then + gcc_no_reorder_blocks=NO + KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) + if test $kde_use_debug_code != "no" && \ + test $kde_use_debug_code != "full" && \ + test "YES" = "$gcc_no_reorder_blocks" ; then + CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" + CFLAGS="$CFLAGS -fno-reorder-blocks" + fi + KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) + KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) + KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) + KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) + ENABLE_PERMISSIVE_FLAG="-fpermissive" + + if test "$kde_use_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c header files) + echo >conftest.h + if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + if test "$kde_gcc_supports_pch" = "yes"; then + AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) + if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then + kde_gcc_supports_pch=yes + AC_MSG_RESULT(yes) + else + kde_gcc_supports_pch=no + AC_MSG_RESULT(no) + fi + fi + rm -f conftest.h conftest.h.gch + fi + + KDE_CHECK_FOR_OPT_NOINLINE_MATCH + if test "x$kde_cv_opt_noinline_match" = "xno" ; then + CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" + fi + fi + AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") + if test "$CXX" = "KCC"; then + dnl unfortunately we currently cannot disable exception support in KCC + dnl because doing so is binary incompatible and Qt by default links with exceptions :-( + dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) + dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) + + if test "$kde_use_pch" = "yes"; then + dnl TODO: support --pch-dir! + KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) + dnl the below works (but the dir must exist), but it's + dnl useless for a whole package. + dnl The are precompiled headers for each source file, so when compiling + dnl from scratch, it doesn't make a difference, and they take up + dnl around ~5Mb _per_ sourcefile. + dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, + dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) + fi + dnl this flag controls inlining. by default KCC inlines in optimisation mode + dnl all implementations that are defined inside the class {} declaration. + dnl because of templates-compatibility with broken gcc compilers, this + dnl can cause excessive inlining. This flag limits it to a sane level + KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) + KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) + KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) + KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) + dnl Some source files are shared between multiple executables + dnl (or libraries) and some of those need template instantiations. + dnl In that case KCC needs to compile those sources with + dnl --one_instantiation_per_object. To make it easy for us we compile + dnl _all_ objects with that flag (--one_per is a shorthand). + KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) + fi + AC_SUBST(USE_EXCEPTIONS) + dnl obsolete macro - provided to keep things going + USE_RTTI= + AC_SUBST(USE_RTTI) + + case "$host" in + *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; + *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; + *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; + *-*-solaris*) + if test "$GXX" = yes; then + libstdcpp=`$CXX -print-file-name=libstdc++.so` + if test ! -f $libstdcpp; then + AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) + fi + fi + ;; + esac + + AC_VALIDIFY_CXXFLAGS + + AC_PROG_CXXCPP + + if test "$GCC" = yes; then + NOOPT_CFLAGS=-O0 + fi + KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) + + AC_ARG_ENABLE(coverage, + AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ + if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="-lgcc" + elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then + ac_coverage_compiler="-fprofile-arcs -ftest-coverage" + ac_coverage_linker="" + else + AC_MSG_ERROR([coverage with your compiler is not supported]) + fi + CFLAGS="$CFLAGS $ac_coverage_compiler" + CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" + LDFLAGS="$LDFLAGS $ac_coverage_linker" + ]) + + AC_SUBST(NOOPT_CXXFLAGS) + AC_SUBST(NOOPT_CFLAGS) + AC_SUBST(ENABLE_PERMISSIVE_FLAG) + + KDE_CHECK_NEW_LDFLAGS + KDE_CHECK_FINAL + KDE_CHECK_CLOSURE + KDE_CHECK_NMCHECK + + ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) +]) + +AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], + [ + AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" + LDFLAGS="$LDFLAGS -shared -fPIC" + + AC_TRY_LINK( + [ + /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ + #include + int some_function( void ) __attribute__ ((visibility("default"))); + int some_function( void ) + { + std::string s("blafasel"); + return 0; + } + ], [/* elvis is alive */], + kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_cv_val_gcc_visibility_bug = xno; then + CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" + fi + ] +) + +AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], +[ + AC_BEFORE([AC_PATH_QT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) + + AC_MSG_CHECKING([grepping for visibility push/pop in headers]) + + if test "x$GXX" = "xyes"; then + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_EGREP_CPP( + [GCC visibility push], + [ #include + ], + [ + AC_MSG_RESULT(yes) + kde_stdc_visibility_patched=yes ], + [ + AC_MSG_RESULT(no) + AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for + visibility support. Disabling -fvisibility=hidden]) + + kde_stdc_visibility_patched=no ]) + + AC_LANG_RESTORE + + kde_have_gcc_visibility=no + KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, + [ + kde_have_gcc_visibility=yes + dnl the whole toolchain is just a mess, gcc is just too buggy + dnl to handle STL with visibility enabled. Lets reconsider + dnl when gcc 4.2 is out or when things get fixed in the compiler. + dnl Contact mueller@kde.org for details. + AC_ARG_ENABLE(gcc-hidden-visibility, + AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), + [kde_have_gcc_visibility=$enableval], + [kde_have_gcc_visibility=no]) + + AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + safe_CXXFLAGS=$CXXFLAGS + CXXFLAGS="$CXXFLAGS $all_includes" + + AC_TRY_COMPILE( + [ +#include +#if Q_EXPORT - 0 != 0 +/* if this compiles, then Q_EXPORT is undefined */ +/* if Q_EXPORT is nonempty, this will break compilation */ +#endif + ], [/* elvis is alive */], + kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) + + CXXFLAGS=$safe_CXXFLAGS + AC_LANG_RESTORE + ] + ) + + if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then + CXXFLAGS="$CXXFLAGS -fvisibility=hidden" + KDE_CHECK_VISIBILITY_GCC_BUG + HAVE_GCC_VISIBILITY=1 + AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) + fi + ]) + fi +]) + +AC_DEFUN([KDE_ADD_DEPENDENCIES], +[ + [A]M_DEPENDENCIES(CC) + [A]M_DEPENDENCIES(CXX) +]) + +dnl just a wrapper to clean up configure.in +AC_DEFUN([KDE_PROG_LIBTOOL], +[ +AC_REQUIRE([AC_CHECK_COMPILERS]) +AC_REQUIRE([AC_ENABLE_SHARED]) +AC_REQUIRE([AC_ENABLE_STATIC]) + +AC_REQUIRE([AC_LIBTOOL_DLOPEN]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_OBJEXT +AC_EXEEXT + +AM_PROG_LIBTOOL +AC_LIBTOOL_CXX + +LIBTOOL_SHELL="/bin/sh ./libtool" +# LIBTOOL="$LIBTOOL --silent" +KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" +AC_SUBST(KDE_PLUGIN) + +# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. +KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" +AC_SUBST(KDE_CHECK_PLUGIN) + +# we patch configure quite some so we better keep that consistent for incremental runs +AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') +]) + +AC_DEFUN([KDE_CHECK_LIB64], +[ + AC_ARG_ENABLE(libsuffix, + AC_HELP_STRING([--enable-libsuffix], + [/lib directory suffix (64,32,none,auto[=default])]), + kdelibsuff=$enableval, kdelibsuff="auto") + + if test "$kdelibsuff" = "auto"; then + +cat > conftest.c << EOF +#include +int main() { + return 0; +} +EOF + kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ + s,.*/lib\([[^\/]]*\)/.*,\1, + p +}'` + rm -rf conftest.* + fi + + if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then + kdelibsuff= + fi + if test -z "$kdelibsuff"; then + AC_MSG_RESULT([not using lib directory suffix]) + AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) + else + if test "$libdir" = '${exec_prefix}/lib'; then + libdir="$libdir${kdelibsuff}" + AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms + fi + AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) + AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) + fi +]) + +AC_DEFUN([KDE_CHECK_TYPES], +[ AC_CHECK_SIZEOF(int, 4)dnl + AC_CHECK_SIZEOF(short)dnl + AC_CHECK_SIZEOF(long, 4)dnl + AC_CHECK_SIZEOF(char *, 4)dnl +])dnl + +dnl Not used - kept for compat only? +AC_DEFUN([KDE_DO_IT_ALL], +[ +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM +AM_INIT_AUTOMAKE($1, $2) +AM_DISABLE_LIBRARIES +AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) +AC_CHECK_COMPILERS +KDE_PROG_LIBTOOL +AM_KDE_WITH_NLS +AC_PATH_KDE +]) + +AC_DEFUN([AC_CHECK_RPATH], +[ +AC_MSG_CHECKING(for rpath) +AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), + USE_RPATH=$enableval, USE_RPATH=yes) + +if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then + + KDE_RPATH="-R \$(libdir)" + + if test "$kde_libraries" != "$libdir"; then + KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" + fi + + if test -n "$qt_libraries"; then + KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" + fi + dnl $x_libraries is set to /usr/lib in case + if test -n "$X_LDFLAGS"; then + X_RPATH="-R \$(x_libraries)" + KDE_RPATH="$KDE_RPATH $X_RPATH" + fi + if test -n "$KDE_EXTRA_RPATH"; then + KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" + fi +fi +AC_SUBST(KDE_EXTRA_RPATH) +AC_SUBST(KDE_RPATH) +AC_SUBST(X_RPATH) +AC_MSG_RESULT($USE_RPATH) +]) + +dnl Check for the type of the third argument of getsockname +AC_DEFUN([AC_CHECK_SOCKLEN_T], +[ + AC_MSG_CHECKING(for socklen_t) + AC_CACHE_VAL(kde_cv_socklen_t, + [ + AC_LANG_PUSH(C++) + kde_cv_socklen_t=no + AC_TRY_COMPILE([ + #include + #include + ], + [ + socklen_t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t=yes + kde_cv_socklen_t_equiv=socklen_t + ]) + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t) + if test $kde_cv_socklen_t = no; then + AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) + AC_CACHE_VAL(kde_cv_socklen_t_equiv, + [ + kde_cv_socklen_t_equiv=int + AC_LANG_PUSH(C++) + for t in int size_t unsigned long "unsigned long"; do + AC_TRY_COMPILE([ + #include + #include + ], + [ + $t len; + getpeername(0,0,&len); + ], + [ + kde_cv_socklen_t_equiv="$t" + break + ]) + done + AC_LANG_POP(C++) + ]) + AC_MSG_RESULT($kde_cv_socklen_t_equiv) + fi + AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined]) + AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, + [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) +]) + +dnl This is a merge of some macros out of the gettext aclocal.m4 +dnl since we don't need anything, I took the things we need +dnl the copyright for them is: +dnl > +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. +dnl > +dnl for this file it is relicensed under LGPL + +AC_DEFUN([AM_KDE_WITH_NLS], + [ + dnl If we use NLS figure out what method + + AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, + [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then + AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + MSGFMT=$GMSGFMT + AC_SUBST(GMSGFMT) + AC_SUBST(MSGFMT) + + AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext programs is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + AC_SUBST(XGETTEXT) + + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper , 1996. + +# serial 1 +# Stephan Kulow: I appended a _KDE against name conflicts + +dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + + +# Check whether LC_MESSAGES is available in . +# Ulrich Drepper , 1995. + +# serial 1 + +AC_DEFUN([AM_LC_MESSAGES], + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) + fi + fi]) + +dnl From Jim Meyering. +dnl FIXME: migrate into libit. + +AC_DEFUN([AM_FUNC_OBSTACK], +[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, + [AC_TRY_LINK([#include "obstack.h"], + [struct obstack *mem;obstack_free(mem,(char *) 0)], + am_cv_func_obstack=yes, + am_cv_func_obstack=no)]) + if test $am_cv_func_obstack = yes; then + AC_DEFINE(HAVE_OBSTACK) + else + LIBOBJS="$LIBOBJS obstack.o" + fi +]) + +dnl From Jim Meyering. Use this if you use the GNU error.[ch]. +dnl FIXME: Migrate into libit + +AC_DEFUN([AM_FUNC_ERROR_AT_LINE], +[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, + [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], + am_cv_lib_error_at_line=yes, + am_cv_lib_error_at_line=no)]) + if test $am_cv_lib_error_at_line = no; then + LIBOBJS="$LIBOBJS error.o" + fi + AC_SUBST(LIBOBJS)dnl +]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper , 1995. + +# serial 1 +# Stephan Kulow: I put a KDE in it to avoid name conflicts + +AC_DEFUN([AM_KDE_GNU_GETTEXT], + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([AM_KDE_WITH_NLS])dnl + AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next]) + + AC_MSG_CHECKING(for stpcpy) + AC_CACHE_VAL(kde_cv_func_stpcpy, + [ + kde_safe_cxxflags=$CXXFLAGS + CXXFLAGS="-Werror" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ + #include + ], + [ + char buffer[200]; + stpcpy(buffer, buffer); + ], + kde_cv_func_stpcpy=yes, + kde_cv_func_stpcpy=no) + AC_LANG_RESTORE + CXXFLAGS=$kde_safe_cxxflags + ]) + AC_MSG_RESULT($kde_cv_func_stpcpy) + if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then + AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) + fi + + AM_LC_MESSAGES + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + ]) + +AC_DEFUN([AC_HAVE_XPM], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= + test -z "$XPM_INCLUDE" && XPM_INCLUDE= + + AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), + xpm_test=$withval, xpm_test="yes") + if test "x$xpm_test" = xno; then + ac_cv_have_xpm=no + else + AC_MSG_CHECKING(for XPM) + AC_CACHE_VAL(ac_cv_have_xpm, + [ + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" + else + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" + fi + CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" + test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" + AC_TRY_LINK([#include ],[], + ac_cv_have_xpm="yes",ac_cv_have_xpm="no") + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + ])dnl + + if test "$ac_cv_have_xpm" = no; then + AC_MSG_RESULT(no) + XPM_LDFLAGS="" + XPMINC="" + $2 + else + AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) + if test "$XPM_LDFLAGS" = ""; then + XPMLIB='-lXpm $(LIB_X11)' + else + XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' + fi + if test "$XPM_INCLUDE" = ""; then + XPMINC="" + else + XPMINC="-I$XPM_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + AC_SUBST(XPMINC) + AC_SUBST(XPMLIB) +]) + +AC_DEFUN([AC_HAVE_DPMS], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= + test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= + DPMS_LIB= + + AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), + dpms_test=$withval, dpms_test="yes") + if test "x$dpms_test" = xno; then + ac_cv_have_dpms=no + else + AC_MSG_CHECKING(for DPMS) + dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. + dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". + AC_CACHE_VAL(ac_cv_have_dpms, + [ + if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then + AC_MSG_RESULT(no) + ac_cv_have_dpms="no" + else + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + ac_save_libs="$LIBS" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" + LIBS="-lX11 -lXext $LIBSOCKET" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + ac_cv_have_dpms="yes", [ + LIBS="-lXdpms $LIBS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + [ + ac_cv_have_dpms="-lXdpms" + ],ac_cv_have_dpms="no") + ]) + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LIBS="$ac_save_libs" + fi + ])dnl + + if test "$ac_cv_have_dpms" = no; then + AC_MSG_RESULT(no) + DPMS_LDFLAGS="" + DPMSINC="" + $2 + else + AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) + if test "$ac_cv_have_dpms" = "-lXdpms"; then + DPMS_LIB="-lXdpms" + fi + if test "$DPMS_LDFLAGS" = ""; then + DPMSLIB="$DPMS_LIB "'$(LIB_X11)' + else + DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' + fi + if test "$DPMS_INCLUDE" = ""; then + DPMSINC="" + else + DPMSINC="-I$DPMS_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + ac_save_cflags="$CFLAGS" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, + [Define if you have the DPMSCapable prototype in ]) + AC_CHECK_DECL(DPMSCapable, + AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, + [#include + #include ]) + AH_TEMPLATE(HAVE_DPMSINFO_PROTO, + [Define if you have the DPMSInfo prototype in ]) + AC_CHECK_DECL(DPMSInfo, + AC_DEFINE(HAVE_DPMSINFO_PROTO),, + [#include + #include ]) + CFLAGS="$ac_save_cflags" + AC_SUBST(DPMSINC) + AC_SUBST(DPMSLIB) +]) + +AC_DEFUN([AC_HAVE_GL], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$GL_LDFLAGS" && GL_LDFLAGS= + test -z "$GL_INCLUDE" && GL_INCLUDE= + + AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), + gl_test=$withval, gl_test="yes") + if test "x$kde_use_qt_emb" = "xyes"; then + # GL and Qt Embedded is a no-go for now. + ac_cv_have_gl=no + elif test "x$gl_test" = xno; then + ac_cv_have_gl=no + else + AC_MSG_CHECKING(for GL) + AC_CACHE_VAL(ac_cv_have_gl, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_ldflags=$LDFLAGS + ac_save_cxxflags=$CXXFLAGS + ac_save_libs=$LIBS + LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" + LIBS="$LIBS -lGL -lGLU" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" + LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$CFLAGS $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include +#include +], [], + ac_cv_have_gl="yes", ac_cv_have_gl="no") + AC_LANG_RESTORE + LDFLAGS=$ac_save_ldflags + CXXFLAGS=$ac_save_cxxflags + LIBS=$ac_save_libs + ])dnl + + if test "$ac_cv_have_gl" = "no"; then + AC_MSG_RESULT(no) + GL_LDFLAGS="" + GLINC="" + $2 + else + AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) + if test "$GL_LDFLAGS" = ""; then + GLLIB='-lGLU -lGL $(LIB_X11)' + else + GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' + fi + if test "$GL_INCLUDE" = ""; then + GLINC="" + else + GLINC="-I$GL_INCLUDE" + fi + AC_MSG_RESULT($ac_cv_have_gl) + $1 + fi + fi + AC_SUBST(GLINC) + AC_SUBST(GLLIB) +]) + + + dnl shadow password and PAM magic - maintained by ossi@kde.org + +AC_DEFUN([KDE_PAM], [ + AC_REQUIRE([KDE_CHECK_LIBDL]) + + want_pam= + AC_ARG_WITH(pam, + AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), + [ if test "x$withval" = "xyes"; then + want_pam=yes + pam_service=kde + elif test "x$withval" = "xno"; then + want_pam=no + else + want_pam=yes + pam_service=$withval + fi + ], [ pam_service=kde ]) + + use_pam= + PAMLIBS= + if test "x$want_pam" != xno; then + AC_CHECK_LIB(pam, pam_start, [ + AC_CHECK_HEADER(security/pam_appl.h, + [ pam_header=security/pam_appl.h ], + [ AC_CHECK_HEADER(pam/pam_appl.h, + [ pam_header=pam/pam_appl.h ], + [ + AC_MSG_WARN([PAM detected, but no headers found! +Make sure you have the necessary development packages installed.]) + ] + ) + ] + ) + ], , $LIBDL) + if test -z "$pam_header"; then + if test "x$want_pam" = xyes; then + AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) + fi + else + AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) + PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" + use_pam=yes + + dnl darwin claims to be something special + if test "$pam_header" = "pam/pam_appl.h"; then + AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) + fi + + dnl test whether struct pam_message is const (Linux) or not (Sun) + AC_MSG_CHECKING(for const pam_message) + AC_EGREP_HEADER([struct pam_message], $pam_header, + [ AC_EGREP_HEADER([const struct pam_message], $pam_header, + [AC_MSG_RESULT([const: Linux-type PAM])], + [AC_MSG_RESULT([nonconst: Sun-type PAM]) + AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] + )], + [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) + fi + fi + + AC_SUBST(PAMLIBS) +]) + +dnl DEF_PAM_SERVICE(arg name, full name, define name) +AC_DEFUN([DEF_PAM_SERVICE], [ + AC_ARG_WITH($1-pam, + AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE=$withval + else + AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. +You may want to enforce it by using --with-pam.]) + fi + ], + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE="$pam_service" + fi + ]) + if test -n "$$3_PAM_SERVICE"; then + AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) + AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) + fi + AC_SUBST($3_PAM_SERVICE) +]) + +AC_DEFUN([KDE_SHADOWPASSWD], [ + AC_REQUIRE([KDE_PAM]) + + AC_CHECK_LIB(shadow, getspent, + [ LIBSHADOW="-lshadow" + ac_use_shadow=yes + ], + [ dnl for UnixWare + AC_CHECK_LIB(gen, getspent, + [ LIBGEN="-lgen" + ac_use_shadow=yes + ], + [ AC_CHECK_FUNC(getspent, + [ ac_use_shadow=yes ], + [ ac_use_shadow=no ]) + ]) + ]) + AC_SUBST(LIBSHADOW) + AC_SUBST(LIBGEN) + + AC_MSG_CHECKING([for shadow passwords]) + + AC_ARG_WITH(shadow, + AC_HELP_STRING([--with-shadow],[If you want shadow password support]), + [ if test "x$withval" != "xno"; then + use_shadow=yes + else + use_shadow=no + fi + ], [ + use_shadow="$ac_use_shadow" + ]) + + if test "x$use_shadow" = xyes; then + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) + else + AC_MSG_RESULT(no) + LIBSHADOW= + LIBGEN= + fi + + dnl finally make the relevant binaries setuid root, if we have shadow passwds. + dnl this still applies, if we could use it indirectly through pam. + if test "x$use_shadow" = xyes || + ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then + case $host in + *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) + SETUIDFLAGS="-m 4755 -o root";; + *) + SETUIDFLAGS="-m 4755";; + esac + fi + AC_SUBST(SETUIDFLAGS) + +]) + +AC_DEFUN([KDE_PASSWDLIBS], [ + AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT + AC_REQUIRE([KDE_PAM]) + AC_REQUIRE([KDE_SHADOWPASSWD]) + + if test "x$use_pam" = "xyes"; then + PASSWDLIBS="$PAMLIBS" + else + PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" + fi + + dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but + dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires + dnl root to read, so kcheckpass needs to be root (even when using pam, since pam + dnl may need to read /etc/master.passwd). + case $host in + *-*-freebsd*) + SETUIDFLAGS="-m 4755 -o root" + ;; + *) + ;; + esac + + AC_SUBST(PASSWDLIBS) +]) + +AC_DEFUN([KDE_CHECK_LIBDL], +[ +AC_CHECK_LIB(dl, dlopen, [ +LIBDL="-ldl" +ac_cv_have_dlfcn=yes +]) + +AC_CHECK_LIB(dld, shl_unload, [ +LIBDL="-ldld" +ac_cv_have_shload=yes +]) + +AC_SUBST(LIBDL) +]) + +AC_DEFUN([KDE_CHECK_DLOPEN], +[ +KDE_CHECK_LIBDL +AC_CHECK_HEADERS(dlfcn.h dl.h) +if test "$ac_cv_header_dlfcn_h" = "no"; then + ac_cv_have_dlfcn=no +fi + +if test "$ac_cv_header_dl_h" = "no"; then + ac_cv_have_shload=no +fi + +dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE +dnl (MM) +AC_ARG_ENABLE(dlopen, +AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), +enable_dlopen=$enableval, +enable_dlopen=yes) + +# override the user's opinion, if we know it better ;) +if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then + enable_dlopen=no +fi + +if test "$ac_cv_have_dlfcn" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) +fi + +if test "$ac_cv_have_shload" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) +fi + +if test "$enable_dlopen" = no ; then + test -n "$1" && eval $1 +else + test -n "$2" && eval $2 +fi + +]) + +AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], +[ +KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) +KDE_PROG_LIBTOOL +AC_MSG_CHECKING([dynamic loading]) +eval "`egrep '^build_libtool_libs=' libtool`" +if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then + dynamic_loading=yes + AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) +else + dynamic_loading=no +fi +AC_MSG_RESULT($dynamic_loading) +if test "$dynamic_loading" = "yes"; then + $1 +else + $2 +fi +]) + +AC_DEFUN([KDE_ADD_INCLUDES], +[ +if test -z "$1"; then + test_include="Pix.h" +else + test_include="$1" +fi + +AC_MSG_CHECKING([for libg++ ($test_include)]) + +AC_CACHE_VAL(kde_cv_libgpp_includes, +[ +kde_cv_libgpp_includes=no + + for ac_dir in \ + \ + /usr/include/g++ \ + /usr/include \ + /usr/unsupported/include \ + /opt/include \ + $extra_include \ + ; \ + do + if test -r "$ac_dir/$test_include"; then + kde_cv_libgpp_includes=$ac_dir + break + fi + done +]) + +AC_MSG_RESULT($kde_cv_libgpp_includes) +if test "$kde_cv_libgpp_includes" != "no"; then + all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" +fi +]) +]) + +AC_DEFUN([KDE_CHECK_LIBPTHREAD], +[ + dnl This code is here specifically to handle the + dnl various flavors of threading library on FreeBSD + dnl 4-, 5-, and 6-, and the (weird) rules around it. + dnl There may be an environment PTHREAD_LIBS that + dnl specifies what to use; otherwise, search for it. + dnl -pthread is special cased and unsets LIBPTHREAD + dnl below if found. + LIBPTHREAD="" + + if test -n "$PTHREAD_LIBS"; then + if test "x$PTHREAD_LIBS" = "x-pthread" ; then + LIBPTHREAD="PTHREAD" + else + PTHREAD_LIBS_save="$PTHREAD_LIBS" + PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` + AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) + KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ + LIBPTHREAD="$PTHREAD_LIBS_save"]) + PTHREAD_LIBS="$PTHREAD_LIBS_save" + fi + fi + + dnl Is this test really needed, in the face of the Tru64 test below? + if test -z "$LIBPTHREAD"; then + AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) + fi + + dnl This is a special Tru64 check, see BR 76171 issue #18. + if test -z "$LIBPTHREAD" ; then + AC_MSG_CHECKING([for pthread_create in -lpthread]) + kde_safe_libs=$LIBS + LIBS="$LIBS -lpthread" + AC_TRY_LINK([#include ],[(void)pthread_create(0,0,0,0);],[ + AC_MSG_RESULT(yes) + LIBPTHREAD="-lpthread"],[ + AC_MSG_RESULT(no)]) + LIBS=$kde_safe_libs + fi + + dnl Un-special-case for FreeBSD. + if test "x$LIBPTHREAD" = "xPTHREAD" ; then + LIBPTHREAD="" + fi + + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], +[ + USE_THREADS="" + if test -z "$LIBPTHREAD"; then + KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) + fi + + AH_VERBATIM(__svr_define, [ +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif +]) + case $host_os in + solaris*) + KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) + CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" + ;; + freebsd*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" + ;; + aix*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" + LIBPTHREAD="$LIBPTHREAD -lc_r" + ;; + linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" + if test "$CXX" = "KCC"; then + CXXFLAGS="$CXXFLAGS --thread_safe" + NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" + fi + ;; + *) + ;; + esac + AC_SUBST(USE_THREADS) + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_THREADING], +[ + AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) + AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) + dnl default is yes if libpthread is found and no if no libpthread is available + if test -z "$LIBPTHREAD"; then + if test -z "$USE_THREADS"; then + kde_check_threading_default=no + else + kde_check_threading_default=yes + fi + else + kde_check_threading_default=yes + fi + AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), + kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) + if test "x$kde_use_threading" = "xyes"; then + AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) + fi +]) + +AC_DEFUN([KDE_TRY_LINK_PYTHON], +[ +if test "$kde_python_link_found" = no; then + +if test "$1" = normal; then + AC_MSG_CHECKING(if a Python application links) +else + AC_MSG_CHECKING(if Python depends on $2) +fi + +AC_CACHE_VAL(kde_cv_try_link_python_$1, +[ +kde_save_cflags="$CFLAGS" +CFLAGS="$CFLAGS $PYTHONINC" +kde_save_libs="$LIBS" +LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" +kde_save_ldflags="$LDFLAGS" +LDFLAGS="$LDFLAGS $PYTHONLIB" + +AC_TRY_LINK( +[ +#include +],[ + PySys_SetArgv(1, 0); +], + [kde_cv_try_link_python_$1=yes], + [kde_cv_try_link_python_$1=no] +) +CFLAGS="$kde_save_cflags" +LIBS="$kde_save_libs" +LDFLAGS="$kde_save_ldflags" +]) + +if test "$kde_cv_try_link_python_$1" = "yes"; then + AC_MSG_RESULT(yes) + kde_python_link_found=yes + if test ! "$1" = normal; then + LIBPYTHON="$LIBPYTHON $2" + fi + $3 +else + AC_MSG_RESULT(no) + $4 +fi + +fi + +]) + +AC_DEFUN([KDE_CHECK_PYTHON_DIR], +[ +AC_MSG_CHECKING([for Python directory]) + +AC_CACHE_VAL(kde_cv_pythondir, +[ + if test -z "$PYTHONDIR"; then + kde_cv_pythondir=/usr/local + else + kde_cv_pythondir="$PYTHONDIR" + fi +]) + +AC_ARG_WITH(pythondir, +AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), +[ + ac_python_dir=$withval +], ac_python_dir=$kde_cv_pythondir +) + +AC_MSG_RESULT($ac_python_dir) +]) + +AC_DEFUN([KDE_CHECK_PYTHON_INTERN], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) +AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) + +if test -z "$1"; then + version="1.5" +else + version="$1" +fi + +AC_MSG_CHECKING([for Python$version]) + +python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" +AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) +if test ! -r $python_incdir/Python.h; then + AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) + python_incdir=$python_incdir/python$version + if test ! -r $python_incdir/Python.h; then + python_incdir=no + fi +fi + +PYTHONINC=-I$python_incdir + +python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" +AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) +if test ! -r $python_libdir/libpython$version.so; then + AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) + if test ! -r $python_libdir/libpython$version.a; then + AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) + python_libdir=$python_libdir/python$version/config + if test ! -r $python_libdir/libpython$version.a; then + python_libdir=no + fi + fi +fi + +PYTHONLIB=-L$python_libdir +kde_orig_LIBPYTHON=$LIBPYTHON +if test -z "$LIBPYTHON"; then + LIBPYTHON=-lpython$version +fi + +AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) +python_moddir=$python_moddir/python$version +if test ! -r $python_moddir/copy.py; then + python_moddir=no +fi + +PYTHONMODDIR=$python_moddir + +AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) + +if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then + LIBPYTHON=$kde_orig_LIBPYTHON + test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" + test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" + $2 +else + dnl Note: this test is very weak + kde_python_link_found=no + KDE_TRY_LINK_PYTHON(normal) + KDE_TRY_LINK_PYTHON(m, -lm) + KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) + KDE_TRY_LINK_PYTHON(tcl, -ltcl) + KDE_TRY_LINK_PYTHON(db2, -ldb2) + KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) + KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], + [AC_MSG_WARN([it seems, Python depends on another library. + Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this + and contact the authors to let them know about this problem]) + ]) + + LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" + AC_SUBST(PYTHONINC) + AC_SUBST(PYTHONLIB) + AC_SUBST(LIBPYTHON) + AC_SUBST(PYTHONMODDIR) + AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_PYTHON], +[ + KDE_CHECK_PYTHON_INTERN("2.5", + [KDE_CHECK_PYTHON_INTERN("2.4", + [KDE_CHECK_PYTHON_INTERN("2.3", + [KDE_CHECK_PYTHON_INTERN("2.2", + [KDE_CHECK_PYTHON_INTERN("2.1", + [KDE_CHECK_PYTHON_INTERN("2.0", + [KDE_CHECK_PYTHON_INTERN($1, $2) ]) + ]) + ]) + ]) + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_STL], +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" + + AC_MSG_CHECKING([if C++ programs can be compiled]) + AC_CACHE_VAL(kde_cv_stl_works, + [ + AC_TRY_COMPILE([ +#include +using namespace std; +],[ + string astring="Hallo Welt."; + astring.erase(0, 6); // now astring is "Welt" + return 0; +], kde_cv_stl_works=yes, + kde_cv_stl_works=no) +]) + + AC_MSG_RESULT($kde_cv_stl_works) + + if test "$kde_cv_stl_works" = "yes"; then + # back compatible + AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) + else + AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. +Check config.log for details - if you're using a Linux distribution you might miss +a package named similar to libstdc++-dev.]) + fi + + CXXFLAGS="$ac_save_CXXFLAGS" + AC_LANG_RESTORE +]) + +AC_DEFUN([AC_FIND_QIMGIO], + [AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for qimgio]) +AC_CACHE_VAL(ac_cv_lib_qimgio, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +ac_save_CXXFLAGS="$CXXFLAGS" +LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +AC_TRY_RUN(dnl +[ +#include +#include +int main() { + QString t = "hallo"; + t.fill('t'); + qInitImageIO(); +} +], + ac_cv_lib_qimgio=yes, + ac_cv_lib_qimgio=no, + ac_cv_lib_qimgio=no) +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then + LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) + AC_SUBST(LIBQIMGIO) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN([AM_DISABLE_LIBRARIES], +[ + AC_PROVIDE([AM_ENABLE_STATIC]) + AC_PROVIDE([AM_ENABLE_SHARED]) + enable_static=no + enable_shared=yes +]) + + +AC_DEFUN([AC_CHECK_UTMP_FILE], +[ + AC_MSG_CHECKING([for utmp file]) + + AC_CACHE_VAL(kde_cv_utmp_file, + [ + kde_cv_utmp_file=no + + for ac_file in \ + \ + /var/run/utmp \ + /var/adm/utmp \ + /etc/utmp \ + ; \ + do + if test -r "$ac_file"; then + kde_cv_utmp_file=$ac_file + break + fi + done + ]) + + if test "$kde_cv_utmp_file" != "no"; then + AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) + $1 + AC_MSG_RESULT($kde_cv_utmp_file) + else + $2 + AC_MSG_RESULT([non found]) + fi +]) + + +AC_DEFUN([KDE_CREATE_SUBDIRSLIST], +[ + +DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" +TOPSUBDIRS="" + +if test ! -s $srcdir/subdirs; then + dnl Note: Makefile.common creates subdirs, so this is just a fallback + files=`cd $srcdir && ls -1` + dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` + for i in $dirs; do + echo $i >> $srcdir/subdirs + done +fi + +ac_topsubdirs= +if test -s $srcdir/inst-apps; then + ac_topsubdirs="`cat $srcdir/inst-apps`" +elif test -s $srcdir/subdirs; then + ac_topsubdirs="`cat $srcdir/subdirs`" +fi + +for i in $ac_topsubdirs; do + AC_MSG_CHECKING([if $i should be compiled]) + if test -d $srcdir/$i; then + install_it="yes" + for j in $DO_NOT_COMPILE; do + if test $i = $j; then + install_it="no" + fi + done + else + install_it="no" + fi + AC_MSG_RESULT($install_it) + vari=`echo $i | sed -e 's,[[-+.@]],_,g'` + if test $install_it = "yes"; then + TOPSUBDIRS="$TOPSUBDIRS $i" + eval "$vari""_SUBDIR_included=yes" + else + eval "$vari""_SUBDIR_included=no" + fi +done + +AC_SUBST(TOPSUBDIRS) +]) + +AC_DEFUN([KDE_CHECK_NAMESPACES], +[ +AC_MSG_CHECKING(whether C++ compiler supports namespaces) +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +AC_TRY_COMPILE([ +], +[ +namespace Foo { + extern int i; + namespace Bar { + extern int i; + } +} + +int Foo::i = 0; +int Foo::Bar::i = 1; +],[ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_NAMESPACES) +], [ +AC_MSG_RESULT(no) +]) +AC_LANG_RESTORE +]) + +dnl ------------------------------------------------------------------------ +dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_S_ISSOCK], +[ +AC_MSG_CHECKING(for S_ISSOCK) +AC_CACHE_VAL(ac_cv_have_s_issock, +[ +AC_TRY_LINK( +[ +#include +], +[ +struct stat buff; +int b = S_ISSOCK( buff.st_mode ); +], +ac_cv_have_s_issock=yes, +ac_cv_have_s_issock=no) +]) +AC_MSG_RESULT($ac_cv_have_s_issock) +if test "$ac_cv_have_s_issock" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) +fi + +AH_VERBATIM(_ISSOCK, +[ +#ifndef HAVE_S_ISSOCK +#define HAVE_S_ISSOCK +#define S_ISSOCK(mode) (1==0) +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], +[ +AC_MSG_CHECKING(for MAXPATHLEN) +AC_CACHE_VAL(ac_cv_maxpathlen, +[ +cat > conftest.$ac_ext < +#endif +#include +#include +#ifndef MAXPATHLEN +#define MAXPATHLEN 1024 +#endif + +KDE_HELLO MAXPATHLEN + +EOF + +ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" + +if AC_TRY_EVAL(ac_try) && test -s conftest.out; then + ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` +else + ac_cv_maxpathlen=1024 +fi + +rm conftest.* + +]) +AC_MSG_RESULT($ac_cv_maxpathlen) +AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) +]) + +AC_DEFUN([KDE_CHECK_HEADER], +[ + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_CHECK_HEADER([$1], [$2], [$3], [$4]) + AC_LANG_RESTORE + CPPFLAGS=$kde_safe_cppflags +]) + +AC_DEFUN([KDE_CHECK_HEADERS], +[ + AH_CHECK_HEADERS([$1]) + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_FAST_CONFIGURE], +[ + dnl makes configure fast (needs perl) + AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), + with_fast_perl=$enableval, with_fast_perl=yes) +]) + +AC_DEFUN([KDE_CONF_FILES], +[ + val= + if test -f $srcdir/configure.files ; then + val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` + fi + CONF_FILES= + if test -n "$val" ; then + for i in $val ; do + CONF_FILES="$CONF_FILES $i" + done + fi + AC_SUBST(CONF_FILES) +])dnl + +dnl This sets the prefix, for arts and kdelibs +dnl Do NOT use in any other module. +dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde +AC_DEFUN([KDE_SET_PREFIX_CORE], +[ + unset CDPATH + dnl make $KDEDIR the default for the installation + AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) + + if test "x$prefix" = "xNONE"; then + prefix=$ac_default_prefix + ac_configure_args="$ac_configure_args --prefix=$prefix" + fi + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + kde_libs_prefix='$(prefix)' + kde_libs_htmldir='$(kde_htmldir)' + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + + +AC_DEFUN([KDE_SET_PREFIX], +[ + unset CDPATH + dnl We can't give real code to that macro, only a value. + dnl It only matters for --help, since we set the prefix in this function anyway. + AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) + + KDE_SET_DEFAULT_BINDIRS + if test "x$prefix" = "xNONE"; then + dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + else + dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH + kde_save_PATH="$PATH" + PATH="$exec_prefix/bin:$prefix/bin:$PATH" + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + PATH="$kde_save_PATH" + fi + + kde_libs_prefix=`$KDECONFIG --prefix` + if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then + AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. + This means it has been moved since you installed it. + This won't work. Please recompile kdelibs for the new prefix. + ]) + fi + kde_libs_htmldir=`$KDECONFIG --install html --expandvars` + + AC_MSG_CHECKING([where to install]) + if test "x$prefix" = "xNONE"; then + prefix=$kde_libs_prefix + AC_MSG_RESULT([$prefix (as returned by kde-config)]) + else + dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different + given_prefix=$prefix + AC_MSG_RESULT([$prefix (as requested)]) + fi + + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + AC_SUBST(KDECONFIG) + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + +pushdef([AC_PROG_INSTALL], +[ + dnl our own version, testing for a -p flag + popdef([AC_PROG_INSTALL]) + dnl as AC_PROG_INSTALL works as it works we first have + dnl to save if the user didn't specify INSTALL, as the + dnl autoconf one overwrites INSTALL and we have no chance to find + dnl out afterwards + test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL + test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM + test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT + AC_PROG_INSTALL + + if test -z "$kde_save_INSTALL_given" ; then + # OK, user hasn't given any INSTALL, autoconf found one for us + # now we test, if it supports the -p flag + AC_MSG_CHECKING(for -p flag to install) + rm -f confinst.$$.* > /dev/null 2>&1 + echo "Testtest" > confinst.$$.orig + ac_res=no + if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then + if test -f confinst.$$.new ; then + # OK, -p seems to do no harm to install + INSTALL="${INSTALL} -p" + ac_res=yes + fi + fi + rm -f confinst.$$.* + AC_MSG_RESULT($ac_res) + fi + dnl the following tries to resolve some signs and wonders coming up + dnl with different autoconf/automake versions + dnl e.g.: + dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s + dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) + dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s + dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has + dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the + dnl install-@DIR@PROGRAMS targets to explicitly use that flag + dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as + dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 + dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure + dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from + dnl automake (due to broken Makefile.am or whatever) to install programs, + dnl and so does not see the -s flag in automake > 1.4 + dnl to clean up that mess we: + dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG + dnl which cleans KDE's program with automake > 1.4; + dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems + dnl with automake<=1.4 + dnl note that dues to this sometimes two '-s' flags are used (if KDE + dnl properly uses install-@DIR@PROGRAMS, but I don't care + dnl + dnl And to all this comes, that I even can't write in comments variable + dnl names used by automake, because it is so stupid to think I wanted to + dnl _use_ them, therefor I have written A_M_... instead of AM_ + dnl hmm, I wanted to say something ... ahh yes: Arghhh. + + if test -z "$kde_save_INSTALL_PROGRAM_given" ; then + INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' + fi + if test -z "$kde_save_INSTALL_SCRIPT_given" ; then + INSTALL_SCRIPT='${INSTALL}' + fi +])dnl + +AC_DEFUN([KDE_LANG_CPLUSPLUS], +[AC_LANG_CPLUSPLUS +ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' +pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) +]) + +pushdef([AC_LANG_CPLUSPLUS], +[popdef([AC_LANG_CPLUSPLUS]) +KDE_LANG_CPLUSPLUS +]) + +AC_DEFUN([KDE_CHECK_LONG_LONG], +[ +AC_MSG_CHECKING(for long long) +AC_CACHE_VAL(kde_cv_c_long_long, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_LINK([], [ + long long foo = 0; + foo = foo+1; + ], + kde_cv_c_long_long=yes, kde_cv_c_long_long=no) + AC_LANG_RESTORE +]) +AC_MSG_RESULT($kde_cv_c_long_long) +if test "$kde_cv_c_long_long" = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) +fi +]) + +AC_DEFUN([KDE_CHECK_LIB], +[ + kde_save_LDFLAGS="$LDFLAGS" + dnl AC_CHECK_LIB modifies LIBS, so save it here + kde_save_LIBS="$LIBS" + LDFLAGS="$LDFLAGS $all_libraries" + case $host_os in + aix*) LDFLAGS="-brtl $LDFLAGS" + test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" + ;; + esac + AC_CHECK_LIB($1, $2, $3, $4, $5) + LDFLAGS="$kde_save_LDFLAGS" + LIBS="$kde_save_LIBS" +]) + +AC_DEFUN([KDE_JAVA_PREFIX], +[ + dir=`dirname "$1"` + base=`basename "$1"` + list=`ls -1 $dir 2> /dev/null` + for entry in $list; do + if test -d $dir/$entry/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/bin" + ;; + esac + elif test -d $dir/$entry/jre/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/jre/bin" + ;; + esac + fi + done +]) + +dnl KDE_CHEC_JAVA_DIR(onlyjre) +AC_DEFUN([KDE_CHECK_JAVA_DIR], +[ + +AC_ARG_WITH(java, +AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), +[ ac_java_dir=$withval +], ac_java_dir="" +) + +AC_MSG_CHECKING([for Java]) + +dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH +if test "x$ac_java_dir" = "xno"; then + kde_java_bindir=no + kde_java_includedir=no + kde_java_libjvmdir=no + kde_java_libgcjdir=no + kde_java_libhpidir=no +else + if test "x$ac_java_dir" = "x"; then + + + dnl No option set -> collect list of candidate paths + if test -n "$JAVA_HOME"; then + KDE_JAVA_PREFIX($JAVA_HOME) + fi + KDE_JAVA_PREFIX(/usr/j2se) + KDE_JAVA_PREFIX(/usr/lib/j2se) + KDE_JAVA_PREFIX(/usr/j*dk*) + KDE_JAVA_PREFIX(/usr/lib/j*dk*) + KDE_JAVA_PREFIX(/opt/j*sdk*) + KDE_JAVA_PREFIX(/usr/lib/java*) + KDE_JAVA_PREFIX(/usr/java*) + KDE_JAVA_PREFIX(/usr/java/j*dk*) + KDE_JAVA_PREFIX(/usr/java/j*re*) + KDE_JAVA_PREFIX(/usr/lib/SunJava2*) + KDE_JAVA_PREFIX(/usr/lib/SunJava*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava*) + KDE_JAVA_PREFIX(/opt/java*) + + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + for dir in $PATH; do + if test -d "$dir"; then + javadirs="$javadirs $dir" + fi + done + IFS=$kde_save_IFS + jredirs= + + dnl Now javadirs contains a list of paths that exist, all ending with bin/ + for dir in $javadirs; do + dnl Check for the java executable + if test -x "$dir/java"; then + sane_path=$(cd $dir; /bin/pwd) + dnl And also check for a libjvm.so somewhere under there + dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. + if test "$sane_path" != "/usr/bin"; then + libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + if test ! -f $libjvmdir/libjvm.so; then continue; fi + jredirs="$jredirs $dir" + fi + fi + done + + dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found + JAVAC= + JAVA= + kde_java_bindir=no + for dir in $jredirs; do + JAVA="$dir/java" + kde_java_bindir=$dir + if test -x "$dir/javac"; then + JAVAC="$dir/javac" + break + fi + done + + if test -n "$JAVAC"; then + dnl this substitution might not work - well, we test for jni.h below + kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` + else + kde_java_includedir=no + fi + else + dnl config option set + kde_java_bindir=$ac_java_dir/bin + if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then + kde_java_includedir=no + else + kde_java_includedir=$ac_java_dir/include + fi + fi +fi + +dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" +if test "x$kde_java_bindir" != "xno"; then + + dnl Look for libjvm.so + kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + dnl Look for libgcj.so + kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` + dnl Look for libhpi.so and avoid green threads + kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` + + dnl Now check everything's fine under there + dnl the include dir is our flag for having the JDK + if test -d "$kde_java_includedir"; then + if test ! -x "$kde_java_bindir/javac"; then + AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) + fi + if test ! -x "$kde_java_bindir/javah"; then + AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -x "$kde_java_bindir/jar"; then + AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -r "$kde_java_includedir/jni.h"; then + AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) + fi + + jni_includes="-I$kde_java_includedir" + dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. + dnl and under linux here.. + + dnl not needed for gcj + + if test "x$kde_java_libgcjdir" = "x"; then + test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" + test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" + test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" + fi + + else + JAVAC= + jni_includes= + fi + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libjvmdir/libjvm.so"; then + AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) + fi + else + if test ! -r "$kde_java_libgcjdir/libgcj.so"; then + AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) + fi + fi + + if test ! -x "$kde_java_bindir/java"; then + AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + + dnl not needed for gcj compile + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libhpidir/libhpi.so"; then + AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) + fi + fi + + if test -n "$jni_includes"; then + dnl Check for JNI version + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_cxxflags_safe="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" + + AC_TRY_COMPILE([ + #include + ], + [ + #ifndef JNI_VERSION_1_2 + Syntax Error + #endif + ],[ kde_jni_works=yes ], + [ kde_jni_works=no ]) + + if test $kde_jni_works = no; then + AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. + You need to have Java Development Kit (JDK) version 1.2. + + Use --with-java to specify another location. + Use --without-java to configure without java support. + Or download a newer JDK and try again. + See e.g. http://java.sun.com/products/jdk/1.2 ]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + AC_LANG_RESTORE + + dnl All tests ok, inform and subst the variables + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + if test "x$kde_java_libgcjdir" = "x"; then + JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" + else + JVMLIBS="-L$kde_java_libgcjdir -lgcj" + fi + AC_MSG_RESULT([java JDK in $kde_java_bindir]) + + else + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([java JRE in $kde_java_bindir]) + fi +elif test -d "/Library/Java/Home"; then + kde_java_bindir="/Library/Java/Home/bin" + jni_includes="-I/Library/Java/Home/include" + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + JVMLIBS="-Wl,-framework,JavaVM" + + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([Apple Java Framework]) +else + AC_MSG_RESULT([none found]) +fi + +AC_SUBST(JAVAC) +AC_SUBST(JAVAH) +AC_SUBST(JAR) +AC_SUBST(JVMLIBS) +AC_SUBST(jni_includes) + +# for backward compat +kde_cv_java_includedir=$kde_java_includedir +kde_cv_java_bindir=$kde_java_bindir +]) + +dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. +dnl When the argument list becomes big, as in KDE for AC_OUTPUT in +dnl big packages, m4_foreach is dog-slow. So use our own version of +dnl it. (matz@kde.org) +m4_define([mm_foreach], +[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) +m4_define([mm_car], [[$1]]) +m4_define([mm_car2], [[$@]]) +m4_define([_mm_foreach], +[m4_if(m4_quote($2), [], [], + [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], + mm_car2(m4_shift($2)), + [$3])])]) +m4_define([AC_FOREACH], +[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) + +AC_DEFUN([KDE_NEED_FLEX], +[ +kde_libs_safe=$LIBS +LIBS="$LIBS $USER_LDFLAGS" +AM_PROG_LEX +LIBS=$kde_libs_safe +if test -z "$LEXLIB"; then + AC_MSG_ERROR([You need to have flex installed.]) +fi +AC_SUBST(LEXLIB) +]) + +AC_DEFUN([AC_PATH_QTOPIA], +[ + dnl TODO: use AC_CACHE_VAL + + if test -z "$1"; then + qtopia_minver_maj=1 + qtopia_minver_min=5 + qtopia_minver_pat=0 + else + qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` + qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` + qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` + fi + + qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" + qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" + + AC_REQUIRE([AC_PATH_QT]) + + AC_MSG_CHECKING([for Qtopia]) + + LIB_QTOPIA="-lqpe" + AC_SUBST(LIB_QTOPIA) + + kde_qtopia_dirs="$QPEDIR /opt/Qtopia" + + ac_qtopia_incdir=NO + + AC_ARG_WITH(qtopia-dir, + AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), + [ ac_qtopia_incdir="$withval"/include] ) + + qtopia_incdirs="" + for dir in $kde_qtopia_dirs; do + qtopia_incdirs="$qtopia_incdirs $dir/include" + done + + if test ! "$ac_qtopia_incdir" = "NO"; then + qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" + fi + + qtopia_incdir="" + AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) + ac_qtopia_incdir="$qtopia_incdir" + + if test -z "$qtopia_incdir"; then + AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) + fi + + qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; + qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; + qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; + + qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" + qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" + if test "$qtopia_ver" -lt "$qtopia_minver"; then + AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr +is required.]) + fi + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + ac_cxxflags_safe="$CXXFLAGS" + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" + LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" + LIBS="$LIBS $LIB_QTOPIA $LIBQT" + + cat > conftest.$ac_ext < +#include + +int main( int argc, char **argv ) +{ + QPEApplication app( argc, argv ); + return 0; +} +EOF + + if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* + else + rm -f conftest* + AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at +the end of config.log]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + AC_LANG_RESTORE + + QTOPIA_INCLUDES="-I$qtopia_incdir" + AC_SUBST(QTOPIA_INCLUDES) + + AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) +]) + + +AC_DEFUN([KDE_INIT_DOXYGEN], +[ +AC_MSG_CHECKING([for Qt docs]) +kde_qtdir= +if test "${with_qt_dir+set}" = set; then + kde_qtdir="$with_qt_dir" +fi + +AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) +AC_MSG_RESULT($QTDOCDIR) + +AC_SUBST(QTDOCDIR) + +KDE_FIND_PATH(dot, DOT, [], []) +if test -n "$DOT"; then + KDE_HAVE_DOT="YES" +else + KDE_HAVE_DOT="NO" +fi +AC_SUBST(KDE_HAVE_DOT) +KDE_FIND_PATH(doxygen, DOXYGEN, [], []) +AC_SUBST(DOXYGEN) + +DOXYGEN_PROJECT_NAME="$1" +DOXYGEN_PROJECT_NUMBER="$2" +AC_SUBST(DOXYGEN_PROJECT_NAME) +AC_SUBST(DOXYGEN_PROJECT_NUMBER) + +KDE_HAS_DOXYGEN=no +if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then + KDE_HAS_DOXYGEN=yes +fi +AC_SUBST(KDE_HAS_DOXYGEN) + +]) + + +AC_DEFUN([AC_FIND_BZIP2], +[ +AC_MSG_CHECKING([for bzDecompress in libbz2]) +AC_CACHE_VAL(ac_cv_lib_bzip2, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#define BZ_NO_STDIO +#include +], + [ bz_stream s; (void) bzDecompress(&s); ], + eval "ac_cv_lib_bzip2='-lbz2'", + eval "ac_cv_lib_bzip2=no") +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +AC_MSG_RESULT($ac_cv_lib_bzip2) + +if test ! "$ac_cv_lib_bzip2" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2" + AC_SUBST(LIBBZ2) + +else + + cxx_shared_flag= + ld_shared_flag= + KDE_CHECK_COMPILER_FLAG(shared, [ + ld_shared_flag="-shared" + ]) + KDE_CHECK_COMPILER_FLAG(fPIC, [ + cxx_shared_flag="-fPIC" + ]) + + AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) + AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_LIBS="$LIBS" + LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" + kde_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" + + AC_TRY_LINK(dnl + [ + #define BZ_NO_STDIO + #include + ], + [ bz_stream s; (void) BZ2_bzDecompress(&s); ], + eval "ac_cv_lib_bzip2_prefix='-lbz2'", + eval "ac_cv_lib_bzip2_prefix=no") + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + + AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) + + if test ! "$ac_cv_lib_bzip2_prefix" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2_prefix" + AC_SUBST(LIBBZ2) + + AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) + dnl else, we just ignore this + fi + +fi +AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the SSL headers and libraries. +dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) +dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([KDE_CHECK_SSL], +[ +LIBSSL="-lssl -lcrypto" +AC_REQUIRE([KDE_CHECK_LIB64]) + +ac_ssl_includes=NO ac_ssl_libraries=NO +ssl_libraries="" +ssl_includes="" +AC_ARG_WITH(ssl-dir, + AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), + [ ac_ssl_includes="$withval"/include + ac_ssl_libraries="$withval"/lib$kdelibsuff + ]) + +want_ssl=yes +AC_ARG_WITH(ssl, + AC_HELP_STRING([--without-ssl],[disable SSL checks]), + [want_ssl=$withval]) + +if test $want_ssl = yes; then + +AC_MSG_CHECKING(for OpenSSL) + +AC_CACHE_VAL(ac_cv_have_ssl, +[#try to guess OpenSSL locations + + ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" + ssl_incdirs="$ac_ssl_includes $ssl_incdirs" + AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) + ac_ssl_includes="$ssl_incdir" + + ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" + if test ! "$ac_ssl_libraries" = "NO"; then + ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" + fi + + test=NONE + ssl_libdir=NONE + for dir in $ssl_libdirs; do + try="ls -1 $dir/libssl*" + if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done + + ac_ssl_libraries="$ssl_libdir" + + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" + LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" + + AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, + ac_ssl_rsaref="yes" + , + ac_ssl_rsaref="no" + ) + + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then + have_ssl=no + else + have_ssl=yes; + fi + + ]) + + eval "$ac_cv_have_ssl" + + AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) + + AC_MSG_CHECKING([whether OpenSSL uses rsaref]) + AC_MSG_RESULT($ac_ssl_rsaref) + + AC_MSG_CHECKING([for easter eggs]) + AC_MSG_RESULT([none found]) + +else + have_ssl=no +fi + +if test "$have_ssl" = yes; then + AC_MSG_CHECKING(for OpenSSL version) + dnl Check for SSL version + AC_CACHE_VAL(ac_cv_ssl_version, + [ + + cat >conftest.$ac_ext < +#include + int main() { + +#ifndef OPENSSL_VERSION_NUMBER + printf("ssl_version=\\"error\\"\n"); +#else + if (OPENSSL_VERSION_NUMBER < 0x00906000) + printf("ssl_version=\\"old\\"\n"); + else + printf("ssl_version=\\"ok\\"\n"); +#endif + return (0); + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + if test "$ac_ssl_includes" != "/usr/include"; then + CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" + fi + + if AC_TRY_EVAL(ac_link); then + + if eval `./conftest 2>&5`; then + if test $ssl_version = error; then + AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) + else + if test $ssl_version = old; then + AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) + have_ssl=no + fi + fi + ac_cv_ssl_version="ssl_version=$ssl_version" + else + AC_MSG_ERROR([Your system couldn't run a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + + else + AC_MSG_ERROR([Your system couldn't link a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + ]) + + eval "$ac_cv_ssl_version" + AC_MSG_RESULT($ssl_version) +fi + +if test "$have_ssl" != yes; then + LIBSSL=""; +else + AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) + ac_cv_have_ssl="have_ssl=yes \ + ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" + + + ssl_libraries="$ac_ssl_libraries" + ssl_includes="$ac_ssl_includes" + + if test "$ac_ssl_rsaref" = yes; then + LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" + fi + + if test $ssl_version = "old"; then + AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) + fi +fi + +SSL_INCLUDES= + +if test "$ssl_includes" = "/usr/include"; then + if test -f /usr/kerberos/include/krb5.h; then + SSL_INCLUDES="-I/usr/kerberos/include" + fi +elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then + SSL_INCLUDES="-I$ssl_includes" +fi + +if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then + SSL_LDFLAGS="" +else + SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" +fi + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LDFLAGS) +AC_SUBST(LIBSSL) +]) + +AC_DEFUN([KDE_CHECK_STRLCPY], +[ + AC_REQUIRE([AC_CHECK_STRLCAT]) + AC_REQUIRE([AC_CHECK_STRLCPY]) + AC_CHECK_SIZEOF(size_t) + AC_CHECK_SIZEOF(unsigned long) + + AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) + AC_TRY_COMPILE(,[ + #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG + choke me + #endif + ],AC_MSG_RESULT([yes]),[ + AC_MSG_RESULT(no) + AC_MSG_ERROR([ + Apparently on your system our assumption sizeof size_t == sizeof unsigned long + does not apply. Please mail kde-devel@kde.org with a description of your system! + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_BINUTILS], +[ + AC_MSG_CHECKING([if ld supports unversioned version maps]) + + kde_save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + echo "{ local: extern \"C++\" { foo }; };" > conftest.map + AC_TRY_LINK([int foo;], +[ +#ifdef __INTEL_COMPILER +icc apparently does not support libtools version-info and version-script +at the same time. Dunno where the bug is, but until somebody figured out, +better disable the optional version scripts. +#endif + + foo = 42; +], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) + LDFLAGS="$kde_save_LDFLAGS" + rm -f conftest.map + AM_CONDITIONAL(include_VERSION_SCRIPT, + [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) + + AC_MSG_RESULT($kde_supports_versionmaps) +]) + +AC_DEFUN([AM_PROG_OBJC],[ +AC_CHECK_PROGS(OBJC, gcc, gcc) +test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) +if test "x${OBJCFLAGS-unset}" = xunset; then + OBJCFLAGS="-g -O2" +fi +AC_SUBST(OBJCFLAGS) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) +]) + +AC_DEFUN([KDE_CHECK_PERL], +[ + KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ + AC_MSG_ERROR([No Perl found in your $PATH. +We need perl to generate some code.]) + ]) + AC_SUBST(PERL) +]) + +AC_DEFUN([KDE_CHECK_LARGEFILE], +[ +AC_SYS_LARGEFILE +if test "$ac_cv_sys_file_offset_bits" != no; then + CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" +fi + +if test "x$ac_cv_sys_large_files" != "xno"; then + CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" +fi + +]) + +dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) +dnl which allows to search for libs that get installed into the KDE prefix. +dnl +dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) +dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page +dnl also defines KSTUFF_PKG_ERRORS on error +AC_DEFUN([KDE_PKG_CHECK_MODULES], [ + + PKG_CONFIG_PATH="$prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + if test "$prefix" != "$kde_libs_prefix"; then + PKG_CONFIG_PATH="$kde_libs_prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" + fi + export PKG_CONFIG_PATH + PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) +]) + + +dnl Check for PIE support in the compiler and linker +AC_DEFUN([KDE_CHECK_PIE_SUPPORT], +[ + AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + safe_CXXFLAGS=$CXXFLAGS + safe_LDFLAGS=$LDFLAGS + CXXFLAGS="$CXXFLAGS -fPIE" + LDFLAGS="$LDFLAGS -pie" + + AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) + + CXXFLAGS=$safe_CXXFLAGS + LDFLAGS=$safe_LDFLAGS + AC_LANG_RESTORE + ]) + + AC_MSG_CHECKING(if enabling -pie/fPIE support) + + AC_ARG_ENABLE(pie, + AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), + [kde_has_pie_support=$enableval], + [kde_has_pie_support=detect]) + + if test "$kde_has_pie_support" = "detect"; then + kde_has_pie_support=$kde_cv_val_pie_support + fi + + AC_MSG_RESULT([$kde_has_pie_support]) + + KDE_USE_FPIE="" + KDE_USE_PIE="" + + AC_SUBST([KDE_USE_FPIE]) + AC_SUBST([KDE_USE_PIE]) + + if test "$kde_has_pie_support" = "yes"; then + KDE_USE_FPIE="-fPIE" + KDE_USE_PIE="-pie" + fi +]) diff --git a/admin/am_edit b/admin/am_edit new file mode 100644 index 0000000..108eb67 --- /dev/null +++ b/admin/am_edit @@ -0,0 +1,2445 @@ +#!/usr/bin/perl -w + +# Expands the specialised KDE tags in Makefile.in to (hopefully) valid +# make syntax. +# When called without file parameters, we work recursively on all Makefile.in +# in and below the current subdirectory. When called with file parameters, +# only those Makefile.in are changed. +# The currently supported tags are +# +# {program}_METASOURCES +# where you have a choice of two styles +# {program}_METASOURCES = name1.moc name2.moc ... [\] +# {program}_METASOURCES = AUTO +# The second style requires other tags as well. +# +# To install icons : +# KDE_ICON = iconname iconname2 ... +# KDE_ICON = AUTO +# +# For documentation : +# http://developer.kde.org/documentation/other/developer-faq.html +# +# and more new tags TBD! +# +# The concept (and base code) for this program came from automoc, +# supplied by the following +# +# Matthias Ettrich (The originator) +# Kalle Dalheimer (The original implementator) +# Harri Porten +# Alex Zepeda +# David Faure +# Stephan Kulow +# Dirk Mueller + +use Cwd; +use File::Find; +use File::Basename; + +# Prototype the functions +sub initialise (); +sub processMakefile ($); +sub updateMakefile (); +sub restoreMakefile (); + +sub removeLine ($$); +sub appendLines ($); +sub substituteLine ($$); + +sub findMocCandidates (); +sub pruneMocCandidates ($); +sub checkMocCandidates (); +sub addMocRules (); +sub findKcfgFile($); + +sub tag_AUTOMAKE (); +sub tag_META_INCLUDES (); +sub tag_METASOURCES (); +sub tag_POFILES (); +sub tag_DOCFILES (); +sub tag_LOCALINSTALL(); +sub tag_IDLFILES(); +sub tag_UIFILES(); +sub tag_KCFGFILES(); +sub tag_SUBDIRS(); +sub tag_ICON(); +sub tag_CLOSURE(); +sub tag_NO_UNDEFINED(); +sub tag_NMCHECK(); +sub tag_DIST(); +sub tag_KDEINIT(); + +# Some global globals... +$verbose = 0; # a debug flag +$thisProg = "$0"; # This programs name +$topdir = cwd(); # The current directory +@makefiles = (); # Contains all the files we'll process +@foreignfiles = (); +$start = (times)[0]; # some stats for testing - comment out for release +$version = "v0.2"; +$errorflag = 0; +$cppExt = "(cpp|cc|cxx|C|c\\+\\+)"; +$hExt = "(h|H|hh|hxx|hpp|h\\+\\+)"; +$progId = "KDE tags expanded automatically by " . basename($thisProg); +$automkCall = "\n"; +$printname = ""; # used to display the directory the Makefile is in +$use_final = 1; # create code for --enable-final +$cleantarget = "clean"; +$dryrun = 0; +$pathoption = 0; +$foreign_libtool = 0; + +while (defined ($ARGV[0])) +{ + $_ = shift; + if (/^--version$/) + { + print STDOUT "\n"; + print STDOUT basename($thisProg), " $version\n", + "This is really free software, unencumbered by the GPL.\n", + "You can do anything you like with it except sueing me.\n", + "Copyright 1998 Kalle Dalheimer \n", + "Concept, design and unnecessary questions about perl\n", + " by Matthias Ettrich \n\n", + "Making it useful by Stephan Kulow and\n", + "Harri Porten \n", + "Updated (Feb-1999), John Birch \n", + "Fixes and Improvements by Dirk Mueller \n", + "Current Maintainer Stephan Kulow\n\n"; + exit 0; + } + elsif (/^--verbose$|^-v$/) + { + $verbose = 1; # Oh is there a problem...? + } + elsif (/^(?:-p|--path=)(.+)$/) + { + my $p = $1; + $thisProg = $p . "/". basename($thisProg); + warn ("$thisProg doesn't exist\n") if (!(-f $thisProg)); + $thisProg .= " -p".$p; + $pathoption=1; + } + elsif (/^--help$|^-h$/) + { + print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n", + "\n", + "Patches dir/Makefile.in generated by automake\n", + "(where dir can be an absolute or relative directory name)\n", + "\n", + " -v, --verbose verbosely list files processed\n", + " -h, --help print this help, then exit\n", + " --version print version number, then exit\n", + " -p, --path= use the path to am_edit if the path\n", + " called from is not the one to be used\n", + " --no-final don't patch for --enable-final\n"; + + exit 0; + } + elsif (/^--no-final$/) + { + $use_final = 0; + $thisProg .= " --no-final"; + } + elsif (/^--foreign-libtool$/) + { + $foreign_libtool = 1; + $thisProg .= " --foreign-libtool"; + } + elsif (/^-n$/) + { + $dryrun = 1; + } + else + { + # user selects what input files to check + # add full path if relative path is given + $_ = cwd()."/".$_ if (! /^\//); + print "User wants $_\n" if ($verbose); + push (@makefiles, $_); + } +} + +if ($thisProg =~ /^\// && !$pathoption ) +{ + print STDERR "Illegal full pathname call performed...\n", + "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n", + "Please use option --path.\n"; + exit 1; +} + +# Only scan for files when the user hasn't entered data +if (!@makefiles) +{ + print STDOUT "Scanning for Makefile.in\n" if ($verbose); + find (\&add_makefile, cwd()); + #chdir('$topdir'); +} else { + print STDOUT "Using input files specified by user\n" if ($verbose); +} + +foreach $makefile (sort(@makefiles)) +{ + processMakefile ($makefile); + last if ($errorflag); +} + +# Just some debug statistics - comment out for release as it uses printf. +printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose); + +exit $errorflag; # causes make to fail if erroflag is set + +#----------------------------------------------------------------------------- + +# In conjunction with the "find" call, this builds the list of input files +sub add_makefile () +{ + push (@makefiles, $File::Find::name) if (/Makefile.in$/); +} + +#----------------------------------------------------------------------------- + +# Processes a single make file +# The parameter contains the full path name of the Makefile.in to use +sub processMakefile ($) +{ + # some useful globals for the subroutines called here + local ($makefile) = @_; + local @headerdirs = ('.'); + local $haveAutomocTag = 0; + local $MakefileData = ""; + + local $cxxsuffix = "KKK"; + + local @programs = (); # lists the names of programs and libraries + local $program = ""; + + local @kdeinits = (); # lists the kdeinit targets + + local %realObjs = (); # lists the objects compiled into $program + local %sources = (); # lists the sources used for $program + local %finalObjs = (); # lists the objects compiled when final + local %realname = (); # the binary name of program variable + local %idlfiles = (); # lists the idl files used for $program + local %globalmocs = ();# list of all mocfiles (in %mocFiles format) + local %important = (); # list of files to be generated asap + local %uiFiles = (); + local %kcfgFiles = (); + + local $allidls = ""; + local $idl_output = "";# lists all idl generated files for cleantarget + local $ui_output = "";# lists all uic generated files for cleantarget + local $kcfg_output = "";# lists all kcfg generated files for cleantarget + + local %dependmocs = (); + + local $metasourceTags = 0; + local $dep_files = ""; + local $dep_finals = ""; + local %target_adds = (); # the targets to add + local %rule_adds = (); + local $kdelang = ""; + local @cleanfiles = (); + local $cleanMoc = ""; + local $closure_output = ""; + + local %varcontent = (); + + $makefileDir = dirname($makefile); + chdir ($makefileDir); + $printname = $makefile; + $printname =~ s/^\Q$topdir\E\///; + $makefile = basename($makefile); + + print STDOUT "Processing makefile $printname\n" if ($verbose); + + # Setup and see if we need to do this. + return if (!initialise()); + + tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in + tag_META_INCLUDES (); # Supplies directories for src locations + + foreach $program (@programs) { + $sources_changed{$program} = 0; + $dependmocs{$program} = ""; + $important{$program} = ""; + tag_IDLFILES(); # Sorts out idl rules + tag_NO_UNDEFINED(); + tag_CLOSURE(); + tag_NMCHECK(); + tag_UIFILES(); # Sorts out ui rules + tag_KCFGFILES(); # Sorts out kcfg rules + tag_METASOURCES (); # Sorts out the moc rules + if ($sources_changed{$program}) { + my $lookup = $program . '_SOURCES\s*=[ \t]*(.*)'; + + if($program =~ /libkdeinit_(.*)/) { + my $prog = $1; + substituteLine($prog . '_SOURCES\s*=[ \t]*(.*)', + "${prog}_SOURCES = ${prog}_dummy.$cxxsuffix\n" . + "libkdeinit_${prog}_SOURCES = " . $sources{$program}); + $sources{$prog} = "${prog}_dummy.$cxxsuffix"; + } + else { + substituteLine($lookup, "$program\_SOURCES=" . $sources{$program}); + } + } + if ($important{$program}) { + local %source_dict = (); + for $source (split(/[\034\s]+/, $sources{$program})) { + $source_dict{$source} = 1; + } + for $source (@cleanfiles) { + $source_dict{$source} = 0; + } + for $source (keys %source_dict) { + next if (!$source); + if ($source_dict{$source}) { + # sanity check + if (! -f $source) { + print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n"; + } else { + $target_adds{"\$(srcdir)/$source"} .= $important{$program}; + } + } + } + } + } + if ($cleanMoc) { + # Always add dist clean tag + # Add extra *.moc.cpp files created for USE_AUTOMOC because they + # aren't included in the normal *.moc clean rules. + appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources "; + } + + tag_DIST() unless ($kdeopts{"noautodist"}); + + if ($idl_output) { + appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-idl "; + } + + if ($ui_output) { + appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-ui "; + } + + if ($kcfg_output) { + appendLines ("$cleantarget-kcfg:\n\t-rm -f $kcfg_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-kcfg "; + } + + if ($closure_output) { + appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-closures "; + } + + if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) { + $kdelang = '$(KDE_LANG)' + } else { + $kdelang = ''; + } + + tag_POFILES (); # language rules for po directory + tag_DOCFILES (); # language rules for doc directories + tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs + tag_ICON(); + tag_SUBDIRS(); + + my $tmp = "force-reedit:\n"; + $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n"; + appendLines($tmp); + + make_bcheck_target(); + make_meta_classes(); + tag_COMPILE_FIRST(); + tag_FINAL() if (!$kdeopts{"nofinal"}); + + my $final_lines = "final:\n\t\$(MAKE) "; + my $final_install_lines = "final-install:\n\t\$(MAKE) "; + my $nofinal_lines = "no-final:\n\t\$(MAKE) "; + my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) "; + + foreach $program (@programs) { + my $lookup = $program . '_OBJECTS\s*=[ \t]*.*'; + my $new = ""; + my @list = split(/[\034\s]+/, $realObjs{$program}); + if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) { + $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program}; + $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program}; + $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)"; + $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)"; + + $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; + $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; + $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" "; + $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" "; + } else { + $new = "$program\_OBJECTS = " . $realObjs{$program}; + } + if($MakefileData =~ m/\n$lookup/) { + substituteLine ($lookup, $new); + } + else { + appendLines("$new\n"); + } + } + appendLines($final_lines . "all-am\n"); + appendLines($final_install_lines . "install-am\n"); + appendLines($nofinal_lines . "all-am\n"); + appendLines($nofinal_install_lines . "install-am\n"); + + my $lookup = '(\@\S+\@)?DEP_FILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + my $condition = $1; + my $depfiles = $2; + my $workfiles; + + if ($dep_finals) { + # Add the conditions on every line, since + # there may be line continuations in the list. + $workfiles = "$dep_files $dep_finals $depfiles"; + $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_TRUE\@\t/g; + $lines = "$condition\@KDE_USE_FINAL_TRUE\@DEP_FILES = $workfiles\n"; + $workfiles = "$dep_files $depfiles"; + $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_FALSE\@\t/g; + $lines .= "$condition\@KDE_USE_FINAL_FALSE\@DEP_FILES = $workfiles"; + } else { + $workfiles = "$dep_files $depfiles"; + $workfiles =~ s/\034/\034$condition\t/g; + $lines = $condition . "DEP_FILES = $workfiles"; + } + substituteLine($lookup, $lines); + } + + # new recursive targets + $target_adds{ "nmcheck" } .= ""; # always create nmcheck target + $target_adds{ "nmcheck-am" } .= "nmcheck"; + $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive bcheck-recursive"); + } + + $cvs_lines = "kde-rpo-clean:\n"; + $cvs_lines .= "\t-rm -f *.rpo\n"; + appendLines($cvs_lines); + $target_adds{"clean"} .= "kde-rpo-clean "; + + my %target_dels = ("install-data-am" => ""); + + # some strange people like to do a install-exec, and expect that also + # all modules are installed. automake doesn't know this, so we need to move + # this here from install-data to install-exec. + if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) { +# $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES "; +# don't use $target_adds here because we need to append the dependency, not +# prepend it. Fixes #44342 , when a module depends on a lib in the same dir +# and libtool needs it during relinking upon install (Simon) + my $lookup = "install-exec-am:([^\n]*)"; + if($MakefileData =~ /\n$lookup\n/) { + substituteLine("$lookup", "install-exec-am: $1 install-kde_moduleLTLIBRARIES"); + } + $target_dels{"install-data-am"} .= "install-kde_moduleLTLIBRARIES "; + $target_adds{"install-data-am"} .= " "; + } + + my $lines = ""; + + foreach $add (keys %target_adds) { + my $lookup = quotemeta($add) . ':([^\n]*)'; + if ($MakefileData =~ /\n$lookup\n/) { + my $newlines = $1; + my $oldlines = $lookup; + if (defined $target_dels{$add}) { + foreach $del (split(' ', $target_dels{$add})) { + $newlines =~ s/\s*$del\s*/ /g; + } + } + substituteLine($oldlines, "$add: " . $target_adds{$add} . $newlines); + } else { + $lines .= "$add: " . $target_adds{$add} . "\n"; + } + } + + appendLines($lines) if ($lines); + + $lines = join("\n", values %rule_adds); + appendLines($lines) if ($lines); + + my $found = 1; + + while ($found) { + if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) { + my $stuff_before = $1; + my $stuff_after = $2; + my $lookup = quotemeta("$1\$(CXXFLAGS)$2"); + my $replacement = "$1\$(KCXXFLAGS)$2"; + $MakefileData =~ s/$lookup/$replacement/; + $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/; + $replacement = "$stuff_before\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$stuff_after"; + next if ($stuff_before =~ /\$\(KDE_CXXFLAGS\)/ or $stuff_after =~ /\$\(KDE_CXXFLAGS\)/); + substituteLine($lookup, $replacement); + } else { + $found = 0; + } + } + + if($foreign_libtool == 0) { + $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))'; + + if ($MakefileData =~ m/$lookup/ ) { + $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; + } + + $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)'; + if ($MakefileData =~ m/$lookup/ ) { + $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; + } + } + + $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g; + + $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)'; + if ($MakefileData =~ m/\n$lookup\n/) { + substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2"); + } + + # Always update the Makefile.in + updateMakefile (); + return; +} + +#----------------------------------------------------------------------------- + +# Beware: This procedure is not complete. E.g. it also parses lines +# containing a '=' in rules (for instance setting shell vars). For our +# usage this us enough, though. +sub read_variables () +{ + while ($MakefileData =~ /\n\s*(\S+)\s*=([^\n]*)/g) { + $varcontent{$1} = $2; + } +} + +# Check to see whether we should process this make file. +# This is where we look for tags that we need to process. +# A small amount of initialising on the tags is also done here. +# And of course we open and/or create the needed make files. +sub initialise () +{ + if (! -r "Makefile.am") { + print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose); + return 0; + } + + # Checking for files to process... + + open (FILEIN, $makefile) || die "Can't open $makefileDir/$makefile: $!\n"; + # perl bug in 5.8.0: in utf8 mode it badly screws up + binmode(FILEIN, ":bytes") if ($] >= 5.008); + # Read the file + # stat(FILEIN)[7] might look more elegant, but is slower as it + # requires stat'ing the file + seek(FILEIN, 0, 2); + my $fsize = tell(FILEIN); + seek(FILEIN, 0, 0); + read FILEIN, $MakefileData, $fsize; + close FILEIN; + print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d); + + # Remove the line continuations, but keep them marked + # Note: we lose the trailing spaces but that's ok. + # Don't mangle line-leading spaces (usually tabs) + # since they're important. + $MakefileData =~ s/\\\s*\n/\034/g; + + # If we've processed the file before... + restoreMakefile () if ($MakefileData =~ /$progId/); + + foreach $dir (@foreignfiles) { + if (substr($makefileDir,0,length($dir)) eq $dir) { + return 0; + } + } + + %kdeopts = (); + $kdeopts{"foreign"} = 0; + $kdeopts{"qtonly"} = 0; + $kdeopts{"noautodist"} = 0; + $kdeopts{"foreign-libtool"} = $foreign_libtool; + $kdeopts{"nofinal"} = !$use_final; # default + + read_variables(); + + if ($MakefileData =~ /\nKDE_OPTIONS\s*=[ \t]*([^\n]*)\n/) { + my $kde_options_str = $1; + local @kde_options = split(/[\034\s]+/, $kde_options_str); + if (grep(/^foreign$/, @kde_options)) { + push(@foreignfiles, $makefileDir . "/"); + return 0; # don't touch me + } + for $opt (@kde_options) { + if (!defined $kdeopts{$opt}) { + print STDERR "Warning: unknown option $opt in $printname\n"; + } else { + $kdeopts{$opt} = 1; + } + } + } + + # Look for the tags that mean we should process this file. + $metasourceTags = 0; + $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g); + + my $pofileTag = 0; + $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g); + if ($pofileTag > 1) + { + print STDERR "Error: Only one POFILES tag allowed\n"; + $errorflag = 1; + } + + while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) { + my $suffixes_str = $1; + my @list=split(' ', $suffixes_str); + foreach $ext (@list) { + if ($ext =~ /^\.$cppExt$/) { + $cxxsuffix = $ext; + $cxxsuffix =~ s/\.//g; + print STDOUT "will use suffix $cxxsuffix\n" if ($verbose); + last; + } + } + } + + tag_KDEINIT(); + + while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[\034 \t]*([^\n]*)\n/g) { + + my $program = $1; + my $objs = $2; # safe them + + my $ocv = 0; + + my @objlist = split(/[\034\s]+/, $objs); + foreach $obj (@objlist) { + if ($obj =~ /(\S*)\$\((\S+)\)/ ) { + my $pre = $1; + my $variable = $2; + if ($pre eq '' && exists($varcontent{$variable})) { + my @addlist = split(/[\034\s]+/, $varcontent{$variable}); + push(@objlist, @addlist); + } elsif ($variable !~ 'OBJEXT' && $variable !~ /am__objects_\d+/ ) { + $ocv = 1; + } + } + } + + next if ($ocv); + next if ($program =~ /^am_libkdeinit_/); + + $program =~ s/^am_// if ($program =~ /^am_/); + + my $sourceprogram = $program; + $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/); + + print STDOUT "found program $program\n" if ($verbose); + push(@programs, $program); + + $realObjs{$program} = $objs; + + if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=[ \t]*(.*)\n/) { + $sources{$program} = $1; + } + else { + $sources{$program} = ""; + print STDERR "found program with no _SOURCES: $program\n"; + } + + my $realprogram = $program; + $realprogram =~ s/_/./g; # unmask to regexp + if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) { + $realname{$program} = $1; + } else { + # not standard Makefile - nothing to worry about + $realname{$program} = ""; + } + } + + my $lookup = 'DEPDIR\s*=.*'; + if ($MakefileData !~ /\n$lookup/) { + $lookup = 'bindir\s*=[ \t]*.*'; + substituteLine($lookup, "DEPDIR = .deps\n$1") if ($MakefileData =~ /\n($lookup)/); + } + + my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES'); + foreach $mark (@marks) { + while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { + my $clean_str = $2; + foreach $file (split('[\034\s]+', $clean_str)) { + $file =~ s/\.\///; + push(@cleanfiles, $file); + } + } + } + + my $localTag = 0; + $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/); + + return (!$errorflag); +} + +#----------------------------------------------------------------------------- + +# Gets the list of user defined directories - relative to $srcdir - where +# header files could be located. +sub tag_META_INCLUDES () +{ + my $lookup = '[^=\n]*META_INCLUDES\s*=[ \t]*(.*)'; + return 1 if ($MakefileData !~ /($lookup)\n/); + print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose); + + my $headerStr = $2; + removeLine ($lookup, $1); + + my @headerlist = split(/[\034\s]+/, $headerStr); + + foreach $dir (@headerlist) + { + $dir =~ s#\$\(srcdir\)#.#; + if (! -d $dir) + { + print STDERR "Warning: $dir can't be found. ", + "Must be a relative path to \$(srcdir)\n"; + } + else + { + push (@headerdirs, $dir); + } + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub tag_FINAL() +{ + my @final_names = (); + + foreach $program (@programs) { + + if ($sources{$program} =~ /\(/) { + print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose); + next; + } + + my $mocs = ""; # Moc files (in this program) + my $moc_cpp_added = 0; # If we added some .moc.cpp files, due to + # no other .cpp file including the .moc one. + + my @progsources = split(/[\034\s]+/, $sources{$program}); + my %shash = (); + @shash{@progsources} = 1; # we are only interested in the existence + my %sourcelist = (); + my %extradeps = (); + + foreach $source (@progsources) { + my $suffix = $source; + $suffix =~ s/^.*\.([^\.]+)$/$1/; + + $sourcelist{$suffix} .= "$source "; + } + foreach my $mocFile (keys (%globalmocs)) + { + my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); + if (defined ($cppFile)) { + $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; + } else { + $sourcelist{$cxxsuffix} .= "$mocFile.moc.$cxxsuffix "; + $moc_cpp_added = 1; + } + } + + # scan for extra given dependencies and add them to our target + while ($MakefileData =~ /\n\s*(\S+)\.(?:lo|o)\s*:([^\n]*)/g) { + $extradeps{$1} = $2; + } + + foreach $suffix (keys %sourcelist) { + # See if this file contains c++ code. (i.e., just check the file's suffix against c++ extensions) + my $suffix_is_cxx = 0; + if($suffix =~ /($cppExt)$/) { + $cxxsuffix = $1; + $suffix_is_cxx = 1; + } + + my $mocfiles_in = ($suffix eq $cxxsuffix) && $moc_cpp_added; + + my @sourcelist = split(/[\034\s]+/, $sourcelist{$suffix}); + + if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) { + + # we support IDL on our own + if ($suffix eq "skel" || $suffix =~ /^stub/ + || $suffix =~ /^signals/ # obsolete, remove in KDE-4 + || $suffix eq "h" || $suffix eq "ui" + || $suffix eq "kcfgc" ) { + next; + } + + foreach $file (@sourcelist) { + $file =~ s/\Q$suffix\E$//; + + $finalObjs{$program} .= $file; + if ($program =~ /_la$/) { + $finalObjs{$program} .= "lo "; + } else { + $finalObjs{$program} .= "o "; + } + } + next; # suffix + } + + my $source_deps = ""; + foreach $source (@sourcelist) { + if (-f $source) { + $source_deps .= " \$(srcdir)/$source"; + } else { + $source_deps .= " $source"; + } + my $plainsource = $source; + $plainsource =~ s/\.$cppExt$//; + $source_deps .= " " . $extradeps{$plainsource} if (exists($extradeps{$plainsource})); + } + + $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in" . $source_deps . " " . join(' ', $mocs) . "\n"; + $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n"; + $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n"; + $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n"; + $handling .= "\tfor file in " . $sourcelist{$suffix} . "; do \\\n"; + $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n"; + $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n"; + $handling .= "\tdone; \\\n"; + $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n"; + $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n"; + + appendLines($handling); + + push(@final_names, "$program.all_$suffix.$suffix"); + my $finalObj = "$program.all_$suffix."; + if ($program =~ /_la$/) { + $finalObj .= "lo"; + } else { + $finalObj .= "o"; + } + $finalObjs{$program} .= $finalObj . " "; + } + } + + if (!$kdeopts{"nofinal"} && @final_names >= 1) { + # add clean-final target + my $lines = "$cleantarget-final:\n"; + $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names); + appendLines($lines); + $target_adds{"$cleantarget-am"} .= "$cleantarget-final "; + + foreach $finalfile (@final_names) { + $finalfile =~ s/\.[^.]*$/.P/; + $dep_finals .= " \$(DEPDIR)/$finalfile"; + } + } +} + +sub tag_KDEINIT() +{ + my @progs = (); + my $ltlibs = ""; + my $lookup = 'kdeinit_LTLIBRARIES\s*=[ \t]*(.*)'; + + if ($MakefileData =~ m/\n$lookup/) { + @kdeinits = split(/[\034\s]+/, $1); + my $lines = ""; + foreach my $kdeinit (@kdeinits) { + if ($kdeinit =~ m/\.la$/) { + $kdeinit =~ s/\.la$//; + push(@progs, $kdeinit); + + $lines .= "\n${kdeinit}.la.$cxxsuffix:\n"; + $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' > ${kdeinit}.la.$cxxsuffix; \\\n"; + $lines .= "\techo 'int main(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}.la.$cxxsuffix\n"; + + $lines .= "\n${kdeinit}_dummy.$cxxsuffix:\n"; + $lines .= "\techo '#include ' > ${kdeinit}_dummy.$cxxsuffix; \\\n"; + $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' >> ${kdeinit}_dummy.$cxxsuffix; \\\n"; + $lines .= "\techo 'extern \"C\" KDE_EXPORT int kdeinitmain(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}_dummy.$cxxsuffix\n"; + + push(@cleanfiles, "${kdeinit}.la.$cxxsuffix"); + push(@cleanfiles, "${kdeinit}_dummy.$cxxsuffix"); + + # add dependency + $dep_files .= " \$(DEPDIR)/${kdeinit}.la.Po" if($dep_files !~/${kdeinit}.la.Po/ ); + $dep_files .= " \$(DEPDIR)/${kdeinit}_dummy.Plo" if($dep_files !~/${kdeinit}_dummy.Plo/ ); + + # make library + $lookup = $kdeinit . '_la_LIBADD\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libadd = $1; + substituteLine($lookup, "${kdeinit}_la_LIBADD = libkdeinit_${kdeinit}.la"); + appendLines("libkdeinit_${kdeinit}_la_LIBADD = $libadd\n"); + } + appendLines("libkdeinit_${kdeinit}_la_LDFLAGS = -no-undefined -avoid-version \$(all_libraries)\n"); + + # add library dependencies + $lookup = $kdeinit . '_la_DEPENDENCIES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libdeps = $1; + substituteLine($lookup, "${kdeinit}_la_DEPENDENCIES = libkdeinit_${kdeinit}.la"); + appendLines("libkdeinit_${kdeinit}_la_DEPENDENCIES = $libdeps\n"); + } + + # make library objects + $lookup = "am_${kdeinit}_la_OBJECTS" . '\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libobjects = $1; + substituteLine($lookup, "am_${kdeinit}_la_OBJECTS = ${kdeinit}_dummy.lo"); + appendLines("am_libkdeinit_${kdeinit}_la_OBJECTS = $libobjects\n"); + my $prog = "libkdeinit_${kdeinit}_la"; + push(@programs, $prog); + $realObjs{$prog} = $libobjects; + $realname{$prog} = "libkdeinit_${kdeinit}.la"; + } + $target_adds{"libkdeinit_${kdeinit}.la"} = "\$(libkdeinit_${kdeinit}_la_OBJECTS) \$(libkdeinit_${kdeinit}_la_DEPENDENCIES)\n" . + "\t\$(CXXLINK) -rpath \$(libdir) \$(libkdeinit_${kdeinit}_la_LDFLAGS) ". + "\$(libkdeinit_${kdeinit}_la_OBJECTS) " . + "\$(libkdeinit_${kdeinit}_la_LIBADD) " . + "\$(LIBS)\n"; + + # make libkdeinit sources + $lookup = $kdeinit . '_la_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $sources_changed{"libkdeinit_${kdeinit}_la"} = 1; + $sources{"libkdeinit_${kdeinit}_la"} = $srces; + } + + # make libkdeinit metasources + $lookup = $kdeinit . '_la_METASOURCES\s*=[ \t]*(.*)'; + substituteLine($lookup, "libkdeinit_${kdeinit}_la_METASOURCES = $1") + if($MakefileData =~ m/\n$lookup/); + +=cut + # make binary sources + $lookup = $kdeinit. '_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + substituteLine($lookup, "${kdeinit}_SOURCES = ${kdeinit}.la.$cxxsuffix"); + $lookup = 'SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; + $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; + substituteLine($lookup, "SOURCES = $srces"); + } + $lookup = 'DIST_SOURCES\s*=[ \t](.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; + $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; + substituteLine($lookup, "DIST_SOURCES = $srces"); + } + } + + # make binary objects / libs + $lookup = $kdeinit . '_OBJECTS\s*=[ \t]*.*'; + if($MakefileData =~ m/\n$lookup/) { + $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; + substituteLine("${kdeinit}_LDFLAGS\\s*=.*", "${kdeinit}_LDFLAGS = \$(all_libraries)"); + substituteLine("${kdeinit}_LDADD\\s*=.*", "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la"); + substituteLine("${kdeinit}_DEPENDENCIES\\s*=.*", "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la"); + } +=cut + # add binary + push(@programs, $kdeinit); + $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; + $realname{$kdeinit} = $kdeinit; + $sources{$kdeinit} = "${kdeinit}.la.$cxxsuffix"; + + $lines .= "${kdeinit}_LDFLAGS = \$(KDE_RPATH) -no-undefined \$(all_libraries)\n"; + $lines .= "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la\n"; + $lines .= "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la\n"; + + $target_adds{"${kdeinit}\$(EXEEXT)"} = + "\$(${kdeinit}_OBJECTS) \$(${kdeinit}_DEPENDENCIES)\n" . + "\t\@rm -f ${kdeinit}\$(EXEEXT)\n" . + "\t\$(CXXLINK) \$(${kdeinit}_LDFLAGS) \$(${kdeinit}_OBJECTS) \$(${kdeinit}_LDADD) \$(LIBS)\n"; + + $ltlibs .= " libkdeinit_${kdeinit}.la"; + } + } + appendLines($lines); + + # add libkdeinit target + $lookup = 'lib_LTLIBRARIES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + substituteLine($lookup, "lib_LTLIBRARIES = $1 $ltlibs"); + } + else { + print STDERR + "Error: lib_LTLIBRARIES missing in $printname (required for kdeinit_LTLIBRARIES).\n"; + $errorflag = 1; + } + } + + if($#progs >= 0) { + if($MakefileData !~ m/\nbin_PROGRAMS\s*=/) { + print STDERR "Error: bin_PROGRAMS missing in $printname (required for kdeinit_LTLIBRARIES).\n"; + $errorflag = 1; + } + else { + # add our new progs to SOURCES, DIST_SOURCES and bin_PROGRAMS + my $progsources = ""; + my $progexes = ""; + foreach my $p (@progs) { + $progsources .= "\$(${p}_SOURCES) "; + $progexes .= "${p}\$(EXEEXT) "; + } + $lookup = 'SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "SOURCES = $1 $progsources"); + } + $lookup = 'DIST_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "DIST_SOURCES = $1 $progsources"); + } + # bin_PROGRAMS is complicated, as it exists twice, so we do a little + # magic trick here + $lookup = 'PROGRAMS\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "bin_PROGRAMS += $progexes\nPROGRAMS = $1"); + } + } + } +} + +#----------------------------------------------------------------------------- + +sub tag_COMPILE_FIRST() +{ + foreach $program (@programs) { + my $lookup = "$program" . '_COMPILE_FIRST\s*=[ \t]*(.*)'; + if ($MakefileData =~ m/\n$lookup\n/) { + my $compilefirst_str = $1; + my @compilefirst = split(/[\034\s]+/, $compilefirst_str); + my @progsources = split(/[\034\s]+/, $sources{$program}); + my %donesources = (); + foreach $source (@progsources) { + my @deps = (); + my $sdeps = ""; + if (-f $source) { + $sdeps = "\$(srcdir)/$source"; + } else { + $sdeps = "$source"; + } + foreach $depend (@compilefirst) { + next if ($source eq $depend); + # avoid cyclic dependencies + next if defined($donesources{$depend}); + push @deps, $depend; + } + $target_adds{$sdeps} .= join(' ', @deps) . ' ' if (@deps); + $donesources{$source} = 1; + } + } + } +} + +#----------------------------------------------------------------------------- + + +# Organises the list of headers that we'll use to produce moc files +# from. +sub tag_METASOURCES () +{ + local @newObs = (); # here we add to create object files + local @depend = (); # here we add to create moc files + local $mocExt = ".moc"; + local %mocFiles = (); + + my $line = ""; + my $postEqual = ""; + + my $lookup; + my $found = ""; + if ($metasourceTags > 1) { + $lookup = $program . '_METASOURCES\s*=\s*(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + $found = $1; + } else { + $lookup = $program . '_METASOURCES\s*=\s*(.*)'; + if ($MakefileData !~ /\n($lookup)\n/) { + $lookup = 'METASOURCES\s*=\s*(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + $found = $1; + $metasourceTags = 0; # we can use the general target only once + } else { + $found = $1; + } + } + print STDOUT "METASOURCE processing <$found>)\n" if ($verbose); + + $postEqual = $found; + $postEqual =~ s/[^=]*=//; + + removeLine ($lookup, $found); + + # Always find the header files that could be used to "moc" + return 1 if (findMocCandidates ()); + + if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/) + { + print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+); + $mocExt = ".moc.$cxxsuffix"; + $haveAutomocTag = 1; + } + else + { + # Not automoc so read the list of files supplied which + # should be .moc files. + + $postEqual =~ tr/\034/ /; + + # prune out extra headers - This also checks to make sure that + # the list is valid. + pruneMocCandidates ($postEqual); + } + + checkMocCandidates (); + + if (@newObs) { + my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o "; + $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext; + $dependmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix"; + foreach $file (@newObs) { + $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/); + } + } + if (@depend) { + $dependmocs{$program} .= " "; + $dependmocs{$program} .= join('.moc ', @depend) . ".moc"; + $dependmocs{$program} .= " "; + } + addMocRules (); + @globalmocs{keys %mocFiles}=values %mocFiles; +} + +#----------------------------------------------------------------------------- + +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_AUTOMAKE () +{ + my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\)(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose); + + my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname"; + + # automake 1.8.x adds another automake call. *sigh* + $newLine =~ s/;([\034\s]+cd\s+\$\(srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\).*)[\034\s]+\&\&[\034\s]+exit[\034\s]+0;([\034\s]+exit\s+1)/; \034 ( $1 ) || exit 1; echo \' cd \$(top_srcdir) && perl $thisProg \'; cd \$(top_srcdir) && perl $thisProg && exit 0; $2/; + substituteLine ($lookup, $newLine); + $automkCall = $1; + + $lookup = '.*cd \$\(srcdir\)\s+&&[\034\s]+\$\(AUTOCONF\)(.*)'; + if ($MakefileData =~ /\n($lookup)\n/) { + $newLine = "\tcd \$(srcdir) && rm -f configure\n"; + $newLine .= "\tcd \$(top_srcdir) && \$(MAKE) -f admin/Makefile.common configure"; + substituteLine ($lookup, $newLine); + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub handle_TOPLEVEL() +{ + my $pofiles = ""; + my @restfiles = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if (-d $entry); + + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/); + + if ($entry =~ /\.po$/) { + next; + } + push(@restfiles, $entry); + } + closedir (THISDIR); + + if (@restfiles) { + $target_adds{"install-data-am"} .= "install-nls-files "; + $lines = "install-nls-files:\n"; + $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n"; + for $file (@restfiles) { + $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; + } + $target_adds{"uninstall"} .= "uninstall-nls-files "; + $lines .= "uninstall-nls-files:\n"; + for $file (@restfiles) { + $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; + } + appendLines($lines); + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub tag_SUBDIRS () +{ + if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) { + return 1; + } + + my $subdirs = "."; + + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./); + if (-d $entry && -f $entry . "/Makefile.am") { + $subdirs .= " $entry"; + next; + } + } + closedir (THISDIR); + + substituteLine('SUBDIRS\s*=.*', "SUBDIRS =$subdirs"); + return 0; +} + +sub tag_IDLFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my $dep_lines = ""; + my @cppFiles = (); + + foreach $source (@psources) { + my $skel = ($source =~ m/\.skel$/); + my $stub = ($source =~ m/\.stub$/); + my $signals = ($source =~ m/\.signals$/); # obsolete, remove in KDE-4 + + if ($stub || $skel || $signals) { + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.(stub|skel|signals)$//; + my $sourcename; + + if ($skel) { + $sourcename = "$source\_skel"; + } elsif ($stub) { + $sourcename = "$source\_stub"; + } else { + $sourcename = "$source\_signals"; + } + + my $sourcedir = ''; + if (-f "$makefileDir/$source.h") { + $sourcedir = '$(srcdir)/'; + } else { + if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) { + $sourcedir = $1; + $sourcedir .= "/" if ($sourcedir !~ /\/$/); + } + } + + if ($allidls !~ /$source\_kidl/) { + + $use_ng = ($MakefileData =~ /\n$source\_DCOPIDLNG\s*=\s*(\S+)\n/); + $dcopidl = $use_ng ? "KDECONFIG=\"\$(KDECONFIG)\" \$(DCOPIDLNG)" : "\$(DCOPIDL)"; + + $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOP_DEPENDENCIES)\n"; + $dep_lines .= "\t$dcopidl $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; false )\n"; + + $allidls .= $source . "_kidl "; + } + + if ($allidls !~ /$sourcename/) { + + $dep_lines_tmp = ""; + + if ($skel) { + $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n"; + $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n"; + } elsif ($stub) { + $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n"; + } else { # signals - obsolete, remove in KDE 4 + $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n"; + } + + if ($stub || $signals) { + $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h "; + $dep_lines .= "$sourcename.h: $source.kidl\n"; + $dep_lines .= $dep_lines_tmp; + } + + $allidls .= $sourcename . " "; + } + + $idlfiles{$program} .= $sourcename . " "; + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $sourcename.lo"; + } else { + $realObjs{$program} .= " $sourcename.\$(OBJEXT)"; + } + $sources{$program} .= " $sourcename.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$sourcename.h " if (!$skel); + $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl "; + push(@cleanfiles, "$sourcename.$cxxsuffix"); + push(@cleanfiles, "$sourcename.h"); + push(@cleanfiles, "$sourcename.kidl"); + $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/); + } + } + if ($dep_lines) { + appendLines($dep_lines); + } + + if (0) { + my $lookup = "($program)"; + $lookup .= '(|\$\(EXEEXT\))'; + $lookup =~ s/\_/./g; + $lookup .= ":(.*..$program\_OBJECTS..*)"; + # $lookup = quotemeta($lookup); + if ($MakefileData =~ /\n$lookup\n/) { + + my $line = "$1$2: "; + foreach $file (split(' ', $idlfiles{$program})) { + $line .= "$file.$cxxsuffix "; + } + $line .= $3; + substituteLine($lookup, $line); + } else { + print STDERR "no built dependency found $lookup\n"; + } + } +} + +sub tag_UIFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my @depFiles = (); + + foreach $source (@psources) { + + if ($source =~ m/\.ui$/) { + + print STDERR "adding UI file $source\n" if ($verbose); + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.ui$//; + + my $sourcedir = ''; + if (-f "$makefileDir/$source.ui") { + $sourcedir = '$(srcdir)/'; + } + + if (!$uiFiles{$source}) { + + my $dep_lines = "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n"; + $dep_lines .= "\trm -f $source.$cxxsuffix\n"; + if (!$kdeopts{"qtonly"}) { + $dep_lines .= "\techo '#include ' > $source.$cxxsuffix\n"; + $dep_lines .= "\techo '#include ' >> $source.$cxxsuffix\n"; + my ($mangled_source) = $source; + $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage + $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n"; + $dep_lines .= "\t\$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | \$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | \$(PERL) -pe \"s,image([0-9][0-9]*)_data,img\\\$\$1_" . $mangled_source . ",g\" | \$(PERL) -pe \"s,: QWizard\\(,: KWizard(,g\" >> $source.$cxxsuffix ;\\\n"; + $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n"; + } else { + $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n"; + } + $dep_lines .= "\tif test \"\$\$ret\" = 0; then echo '#include \"$source.moc\"' >> $source.$cxxsuffix; else rm -f $source.$cxxsuffix ; exit \$\$ret ; fi\n\n"; + $dep_lines .= "$source.h: $sourcedir$source.ui\n"; + $dep_lines .= "\trm -rf $source.h;\n"; + if (!$kdeopts{"qtonly"}) { + $dep_lines .= "\t\$(UIC) $sourcedir$source.ui | \$(PERL) -pi -e \"s,public QWizard,public KWizard,g; s,#include ,#include ,g\" >> $source.h ;\n"; + } else { + $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n"; + } + $dep_lines .= "$source.moc: $source.h\n"; + $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n"; + + $rule_adds{"$source.$cxxsuffix"} = $dep_lines; + + $uiFiles{$source} = 1; + $dependmocs{$program} .= " $source.moc"; + $globalmocs{$source} = "\035$source.h\035$source.cpp"; + } + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $source.lo"; + } else { + $realObjs{$program} .= " $source.\$(OBJEXT)"; + } + $sources{$program} .= " $source.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$source.h "; + $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc "; + push(@cleanfiles, "$source.$cxxsuffix"); + push(@cleanfiles, "$source.h"); + push(@cleanfiles, "$source.moc"); + $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); + } + } +} + +sub tag_KCFGFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my @depFiles = (); + + foreach $source (@psources) { + + if ($source =~ m/\.kcfgc$/) { + + print STDERR "adding KCFG file $source\n" if ($verbose); + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.kcfgc$//; + + my $sourcedir = ''; + if (-f "$makefileDir/$source.kcfgc") { + $sourcedir = '$(srcdir)/'; + } + + if (!$kcfgFiles{$source}) { + $kcfg = "$program.kcfg"; + findKcfgFile("$source.kcfgc"); + + my $fixsuffix = ""; + $fixsuffix = "else mv $source.cpp $source.$cxxsuffix ; " + unless "cpp" eq $cxxsuffix; + + my $dep_lines = "$source.$cxxsuffix: $source.h\n"; + $dep_lines .= "$source.h: $sourcedir$kcfg $sourcedir$source.kcfgc \$(KCFG_DEPENDENCIES)\n"; + $dep_lines .= "\t\$(KCONFIG_COMPILER) $sourcedir$kcfg $sourcedir$source.kcfgc; ret=\$\$?; \\\n"; + $dep_lines .= "\tif test \"\$\$ret\" != 0; then rm -f $source.h ; exit \$\$ret ; $fixsuffix fi\n\n"; + + $rule_adds{"$source.$cxxsuffix"} = $dep_lines; + + $kcfgFiles{$source} = 1; + } + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $source.lo"; + } else { + $realObjs{$program} .= " $source.\$(OBJEXT)"; + } + $sources{$program} .= " $source.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$source.h "; + $kcfg_output .= "\\\n\t$source.$cxxsuffix $source.h "; + push(@cleanfiles, "$source.$cxxsuffix"); + push(@cleanfiles, "$source.h"); + $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); + } + } +} + +sub tag_ICON() +{ + my $lookup = '([^\s]*)_ICON\s*=[ \t]*(.*)'; + my $install = ""; + my $uninstall = ""; + + while ($MakefileData =~ /\n$lookup/g) { + my $destdir; + if ($1 eq "KDE") { + $destdir = "kde_icondir"; + } else { + $destdir = $1 . "dir"; + } + my $iconauto = ($2 =~ /AUTO\s*$/); + my @appnames = (); + if ( ! $iconauto ) { + my $appicon_str = $2; + my @_appnames = split(" ", $appicon_str); + print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose); + foreach $appname (@_appnames) { + push(@appnames, quotemeta($appname)); + } + } else { + print STDOUT "KDE_ICON processing \n" if ($verbose); + } + + my @files = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); + next if (! -f $entry); + if ( $iconauto ) + { + push(@files, $entry) + if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/ || $entry =~ /\.svg/); + } else { + foreach $appname (@appnames) { + push(@files, $entry) + if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/ || $entry =~ /-$appname\.svg/); + } + } + } + closedir (THISDIR); + + my %directories = (); + + foreach $file (@files) { + my $newfile = $file; + my $prefix = $file; + $prefix =~ s/\.(png|xpm|mng|svg|svgz)$//; + my $appname = $prefix; + $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; + $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; + $appname = quotemeta($appname); + $prefix =~ s/$appname$//; + $prefix =~ s/-$//; + + $prefix = 'lo16-app' if ($prefix eq 'mini'); + $prefix = 'lo32-app' if ($prefix eq 'lo'); + $prefix = 'hi48-app' if ($prefix eq 'large'); + $prefix .= '-app' if ($prefix =~ m/^...$/); + + my $type = $prefix; + $type =~ s/^.*-([^-]+)$/$1/; + $prefix =~ s/^(.*)-[^-]+$/$1/; + + my %type_hash = + ( + 'action' => 'actions', + 'app' => 'apps', + 'device' => 'devices', + 'filesys' => 'filesystems', + 'mime' => 'mimetypes' + ); + + if (! defined $type_hash{$type} ) { + print STDERR "unknown icon type $type in $printname ($file)\n"; + next; + } + + my %dir_hash = + ( + 'los' => 'locolor/16x16', + 'lom' => 'locolor/32x32', + 'him' => 'hicolor/32x32', + 'hil' => 'hicolor/48x48', + 'lo16' => 'locolor/16x16', + 'lo22' => 'locolor/22x22', + 'lo32' => 'locolor/32x32', + 'hi16' => 'hicolor/16x16', + 'hi22' => 'hicolor/22x22', + 'hi32' => 'hicolor/32x32', + 'hi48' => 'hicolor/48x48', + 'hi64' => 'hicolor/64x64', + 'hi128' => 'hicolor/128x128', + 'hisc' => 'hicolor/scalable', + 'cr16' => 'crystalsvg/16x16', + 'cr22' => 'crystalsvg/22x22', + 'cr32' => 'crystalsvg/32x32', + 'cr48' => 'crystalsvg/48x48', + 'cr64' => 'crystalsvg/64x64', + 'cr128' => 'crystalsvg/128x128', + 'crsc' => 'crystalsvg/scalable' + ); + + $newfile =~ s@.*-($appname\.(png|xpm|mng|svgz|svg?))@$1@; + + if (! defined $dir_hash{$prefix}) { + print STDERR "unknown icon prefix $prefix in $printname\n"; + next; + } + + my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type}; + if ($newfile =~ /-[^\.]/) { + my $tmp = $newfile; + $tmp =~ s/^([^-]+)-.*$/$1/; + $dir = $dir . "/" . $tmp; + $newfile =~ s/^[^-]+-//; + } + + if (!defined $directories{$dir}) { + $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n"; + $directories{$dir} = 1; + } + + $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; + $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; + + } + } + + if (length($install)) { + $target_adds{"install-data-am"} .= "install-kde-icons "; + $target_adds{"uninstall-am"} .= "uninstall-kde-icons "; + appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall); + } +} + +sub handle_POFILES($$) +{ + my @pofiles = split(" ", $_[0]); + my $lang = $_[1]; + + # Build rules for creating the gmo files + my $tmp = ""; + my $allgmofiles = ""; + my $pofileLine = "POFILES ="; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + $tmp .= "$1.gmo: $pofile\n"; + $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n"; + $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n"; + $allgmofiles .= " $1.gmo"; + $pofileLine .= " $1.po"; + } + appendLines ($tmp); + my $lookup = 'POFILES\s*=([^\n]*)'; + if ($MakefileData !~ /\n$lookup/) { + appendLines("$pofileLine\nGMOFILES =$allgmofiles"); + } else { + substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles"); + } + + if ($allgmofiles) { + + # Add the "clean" rule so that the maintainer-clean does something + appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n"); + + $target_adds{"maintainer-clean"} .= "clean-nls "; + + $lookup = 'DISTFILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1"; + substituteLine ($lookup, $tmp); + } + } + + $target_adds{"install-data-am"} .= "install-nls "; + + $tmp = "install-nls:\n"; + if ($lang) { + $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n"; + } + $tmp .= "\t\@for base in "; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + $tmp .= "$1 "; + } + + $tmp .= "; do \\\n"; + if ($lang) { + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t fi ;\\\n"; + } else { + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n"; + $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t fi ;\\\n"; + } + $tmp .= "\tdone\n\n"; + appendLines ($tmp); + + $target_adds{"uninstall"} .= "uninstall-nls "; + + $tmp = "uninstall-nls:\n"; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + if ($lang) { + $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n"; + } else { + $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n"; + } + } + appendLines($tmp); + + $target_adds{"all"} .= "all-nls "; + + $tmp = "all-nls: \$(GMOFILES)\n"; + + appendLines($tmp); + + $target_adds{"distdir"} .= "distdir-nls "; + + $tmp = "distdir-nls:\$(GMOFILES)\n"; + $tmp .= "\tfor file in \$(POFILES); do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + $tmp .= "\tfor file in \$(GMOFILES); do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + + appendLines ($tmp); + + if (!$lang) { + appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n"); + } + +} + +#----------------------------------------------------------------------------- + +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_POFILES () +{ + my $lookup = 'POFILES\s*=([^\n]*)'; + return 1 if ($MakefileData !~ /\n$lookup/); + print STDOUT "POFILES processing <$1>\n" if ($verbose); + + my $tmp = $1; + + # make sure these are all gone. + if ($MakefileData =~ /\n\.po\.gmo:\n/) + { + print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n"; + return 1; + } + + # Either find the pofiles in the directory (AUTO) or use + # only the specified po files. + my $pofiles = ""; + if ($tmp =~ /^\s*AUTO\s*$/) + { + opendir (THISDIR, "."); + $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR))); + closedir (THISDIR); + print STDOUT "pofiles found = $pofiles\n" if ($verbose); + if (-f "charset" && -f "kdelibs/kdelibs.po") { + handle_TOPLEVEL(); + } + } + else + { + $tmp =~ s/\034/ /g; + $pofiles = $tmp; + } + return 1 if (!$pofiles); # Nothing to do + + handle_POFILES($pofiles, $kdelang); + + return 0; +} + +sub helper_LOCALINSTALL($) +{ + my $lookup = "\035" . $_[0] . " *:[^\035]*\035\t"; + my $copy = $MakefileData; + $copy =~ s/\n/\035/g; + if ($copy =~ /($lookup.*)$/) { + + $install = $1; + $install =~ s/\035$_[0] *:[^\035]*\035//; + my $emptyline = 0; + while (! $emptyline ) { + if ($install =~ /([^\035]*)\035(.*)/) { + local $line = $1; + $install = $2; + if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) { + $emptyline = 1; + } else { + replaceDestDir($line); + } + } else { + $emptyline = 1; + } + } + } + +} + +sub tag_LOCALINSTALL () +{ + helper_LOCALINSTALL('install-exec-local'); + helper_LOCALINSTALL('install-data-local'); + helper_LOCALINSTALL('uninstall-local'); + + return 0; +} + +sub replaceDestDir($) { + local $line = $_[0]; + + if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/ + || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/ + || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/) + { + $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/); + } + + if ($line ne $_[0]) { + $_[0] = quotemeta $_[0]; + substituteLine($_[0], $line); + } +} + +#--------------------------------------------------------------------------- +# libtool is very hard to persuade it could use -Wl,--no-undefined for making +# -no-undefined actually work +# append $(KDE_NO_UNFINED) after every -no-undefined in LDFLAGS +# this may go away if libtool ever does this on its own +sub tag_NO_UNDEFINED () { + return if ($program !~ /_la$/); + + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + return if (!defined($1)); + return if ($1 !~ /CXXLINK/); + + if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ ) { + return; + } + + $lookup = $program . '\_LDFLAGS(\s*)=(.*)-no-undefined(.*)'; + if ($MakefileData =~ /\n$lookup\n/) { + my $replace = $program . "\_LDFLAGS$1=$2-no-undefined \$(KDE_NO_UNDEFINED)$3"; + substituteLine($lookup, $replace); + } +} + +sub tag_CLOSURE () { + return if ($program !~ /_la$/); + + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + return if (!defined($1)); + return if ($1 !~ /CXXLINK/); + + if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ && + $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) { + print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun); + return; + } + + my $closure = $realname{$program} . ".closure"; + my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n"; + $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n"; + $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n"; + $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n"; + $lines .= "\t\@rm -f $program\_closure.* $closure\n"; + $lines .= "\t\@echo \"timestamp\" > $closure\n"; + $lines .= "\n"; + appendLines($lines); + $lookup = $realname{$program} . ": (.*)"; + if ($MakefileData =~ /\n$lookup\n/) { + $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1"; + $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1"; + substituteLine($lookup, $lines); + } + $closure_output .= " $closure"; +} + +sub tag_NMCHECK () { + return if ($program !~ /_la$/); + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + my $linkcmd = $1; + return if (!defined($1)); + return if ($linkcmd !~ /CXXLINK/ && $linkcmd !~ /LINK/); + + $lookup = $program . '_NMCHECK\s*=([^\n]*)'; + if( $MakefileData !~ m/\n$lookup\n/ ) { + return; + } + my $allowed = $1; + $allowed =~ s/^ *//; + $lookup = $program . '_NMCHECKWEAK\s*=([^\n]*)'; + my $weak = ""; + my $is_weak = 0; + if( $MakefileData =~ m/\n$lookup\n/ ) { + $weak = $1; + $is_weak = 1; + } + $weak =~ s/^ *//; + + if( $is_weak ) + { + $weak = '--allowweak=\'' . $weak . '\' '; + } + my $nmline = "\@KDE_USE_NMCHECK_TRUE@\t\@\$(MAKE) \$(AM_MAKEFLAGS) nmcheck_$realname{$program} || ( rm -f $realname{$program}; exit 1 )"; + $lookup = '(\t\$\(CXXLINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; + if( $MakefileData =~ /\n$lookup\n/ ) { + my $oldstuff = $1; + substituteLine( $lookup, $oldstuff . "\n" . $nmline ); + } + $lookup = '(\t\$\(LINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; + if( $MakefileData =~ /\n$lookup\n/ ) { + my $oldstuff = $1; + substituteLine( $lookup, $oldstuff . "\n" . $nmline ); + } + $nmline = "\@\$(top_srcdir)/admin/nmcheck $realname{$program} \'$allowed\' $weak"; + appendLines( "\nnmcheck_$realname{$program}: $realname{$program} \n\t$nmline\n" ); + $target_adds{ "nmcheck" } .= "nmcheck_$realname{$program} "; +} + +sub tag_DIST () { + my %foundfiles = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry eq "Makefile" || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); + next if (! -f $entry); + next if ($entry =~ /\.moc/ || $entry =~ /\.moc.$cppExt$/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/); + next if ($entry =~ /\.all_$cppExt\.$cppExt$/); + $foundfiles{$entry} = 1; + } + closedir (THISDIR); + + # doing this for MAINTAINERCLEANFILES would be wrong + my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS'); + foreach $mark (@marks) { + while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { + my $cleanfiles_str = $2; + foreach $file (split('[\034\s]+', $cleanfiles_str)) { + $file =~ s/\.\///; + $foundfiles{$file} = 0 if (defined $foundfiles{$file}); + } + } + } + my @files = ("Makefile", "config.cache", "config.log", "stamp-h", + "stamp-h1", "stamp-h1", "config.h", "Makefile", + "config.status", "config.h", "libtool", "core" ); + foreach $file (@files) { + $foundfiles{$file} = 0 if (defined $foundfiles{$file}); + } + + my $KDE_DIST = ""; + foreach $file (keys %foundfiles) { + if ($foundfiles{$file} == 1) { + $KDE_DIST .= "$file "; + } + } + if ($KDE_DIST) { + print "KDE_DIST $printname $KDE_DIST\n" if ($verbose); + + my $lookup = 'DISTFILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "DISTFILES = $1 \$(KDE_DIST)"); + appendLines("KDE_DIST=$KDE_DIST\n"); + } + } +} + +#----------------------------------------------------------------------------- +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_DOCFILES () +{ + $target_adds{"all"} .= "docs-am "; + + my $lookup = 'KDE_DOCS\s*=[ \t]*([^\n]*)'; + goto nodocs if ($MakefileData !~ /\n$lookup/); + print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose); + + my $tmp = $1; + + # Either find the files in the directory (AUTO) or use + # only the specified po files. + my $files = ""; + my $appname = $tmp; + $appname =~ s/^(\S*)\s*.*$/$1/; + if ($appname =~ /AUTO/) { + $appname = basename($makefileDir); + if ("$appname" eq "en") { + print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n"; + exit(1); + } + } + + if ($tmp !~ / - /) + { + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry eq "core" || $entry eq "index.cache.bz2"); + next if (! -f $entry); + $files .= "$entry "; + } + closedir (THISDIR); + print STDOUT "docfiles found = $files\n" if ($verbose); + } + else + { + $tmp =~ s/\034/ /g; + $tmp =~ s/^\S*\s*-\s*//; + $files = $tmp; + } + goto nodocs if (!$files); # Nothing to do + + if ($files =~ /(^| )index\.docbook($| )/) { + + my $lines = ""; + my $lookup = 'MEINPROC\s*='; + if ($MakefileData !~ /\n($lookup)/) { + $lines = "MEINPROC=/\$(kde_bindir)/meinproc\n"; + } + $lookup = 'KDE_XSL_STYLESHEET\s*='; + if ($MakefileData !~ /\n($lookup)/) { + $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n"; + } + $lookup = '\nindex.cache.bz2:'; + if ($MakefileData !~ /\n($lookup)/) { + $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n"; + $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n"; + $lines .= "\n"; + } + + $lines .= "docs-am: index.cache.bz2\n"; + $lines .= "\n"; + $lines .= "install-docs: docs-am install-nls\n"; + $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $lines .= "\t\@if test -f index.cache.bz2; then \\\n"; + $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\telif test -f \$(srcdir)/index.cache.bz2; then \\\n"; + $lines .= "\techo \$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\t\$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\tfi\n"; + $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; + $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; + + $lines .= "\n"; + $lines .= "uninstall-docs:\n"; + $lines .= "\t-rm -rf \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $lines .= "\n"; + $lines .= "clean-docs:\n"; + $lines .= "\t-rm -f index.cache.bz2\n"; + $lines .= "\n"; + $target_adds{"install-data-am"} .= "install-docs "; + $target_adds{"uninstall"} .= "uninstall-docs "; + $target_adds{"clean-am"} .= "clean-docs "; + appendLines ($lines); + } else { + appendLines("docs-am: $files\n"); + } + + $target_adds{"install-data-am"} .= "install-nls "; + $target_adds{"uninstall"} .= "uninstall-nls "; + + $tmp = "install-nls:\n"; + $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $tmp .= "\t\@for base in $files; do \\\n"; + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\tdone\n"; + if ($appname eq 'common') { + $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n"; + $tmp .= "\tif test ! -f \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n"; + $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n"; + $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n"; + $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n"; + $tmp .= "\t case \" $files \" in \\\n"; + $tmp .= "\t *\" \$\$p \"*) ;; \\\n"; + $tmp .= "\t *) test ! -f \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n"; + $tmp .= "\t esac ; \\\n"; + $tmp .= "\tdone ; fi ; true\n"; + } + $tmp .= "\n"; + $tmp .= "uninstall-nls:\n"; + $tmp .= "\tfor base in $files; do \\\n"; + $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\tdone\n\n"; + appendLines ($tmp); + + $target_adds{"distdir"} .= "distdir-nls "; + + $tmp = "distdir-nls:\n"; + $tmp .= "\tfor file in $files; do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + + appendLines ($tmp); + + return 0; + + nodocs: + appendLines("docs-am:\n"); + return 1; +} + +#----------------------------------------------------------------------------- +# Find headers in any of the source directories specified previously, that +# are candidates for "moc-ing". +sub findMocCandidates () +{ + foreach $dir (@headerdirs) + { + my @list = (); + opendir (SRCDIR, "$dir"); + @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR); + closedir SRCDIR; + foreach $hf (@hFiles) + { + next if ($hf =~ /^\.\#/); + $hf =~ /(.*)\.[^\.]*$/; # Find name minus extension + next if ($uiFiles{$1}); + open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n"; + my $hfsize = 0; + seek(HFIN, 0, 2); + $hfsize = tell(HFIN); + seek(HFIN, 0, 0); + read HFIN, $hfData, $hfsize; + close HFIN; + # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT + # handle " { friend class blah; Q_OBJECT ", but don't match antlarr_Q_OBJECT (\b). + if ( $hfData =~ /{([^}]*)\bQ_OBJECT/s ) { + push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s; ## reject "// Q_OBJECT" + } + } + # The assoc array of root of headerfile and header filename + foreach $hFile (@list) + { + $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension + if ($mocFiles{$1}) + { + print STDERR "Warning: Multiple header files found for $1\n"; + next; # Use the first one + } + $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir + } + } + + return 0; +} + +#----------------------------------------------------------------------------- + +# The programmer has specified a moc list. Prune out the moc candidates +# list that we found based on looking at the header files. This generates +# a warning if the programmer gets the list wrong, but this doesn't have +# to be fatal here. +sub pruneMocCandidates ($) +{ + my %prunedMoc = (); + local @mocList = split(' ', $_[0]); + + foreach $mocname (@mocList) + { + $mocname =~ s/\.moc$//; + if ($mocFiles{$mocname}) + { + $prunedMoc{$mocname} = $mocFiles{$mocname}; + } + else + { + my $print = $makefileDir; + $print =~ s/^\Q$topdir\E\\//; + # They specified a moc file but we can't find a header that + # will generate this moc file. That's possible fatal! + print STDERR "Warning: No moc-able header file for $print/$mocname\n"; + } + } + + undef %mocFiles; + %mocFiles = %prunedMoc; +} + +#----------------------------------------------------------------------------- + +# Finds the cpp files (If they exist). +# The cpp files get appended to the header file separated by \035 +sub checkMocCandidates () +{ + my @cppFiles; + my $cpp2moc; # which c++ file includes which .moc files + my $moc2cpp; # which moc file is included by which c++ files + + return unless (keys %mocFiles); + opendir(THISDIR, ".") || return; + @cppFiles = grep { /.+\.$cppExt$/o && !/.+\.moc\.$cppExt$/o + && !/.+\.all_$cppExt\.$cppExt$/o + && !/^\./ } readdir(THISDIR); + closedir THISDIR; + return unless (@cppFiles); + my $files = join (" ", @cppFiles); + $cpp2moc = {}; + $moc2cpp = {}; + foreach $cxxf (@cppFiles) + { + open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n"; + seek(CXXFIN, 0, 2); + my $cxxfsize = tell(CXXFIN); + seek(CXXFIN, 0, 0); + read CXXFIN, $cxxfData, $cxxfsize; + close CXXFIN; + while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) { + $cpp2moc->{$cxxf}->{$1} = 1; + $moc2cpp->{$1}->{$cxxf} = 1; + } + } + foreach my $mocFile (keys (%mocFiles)) + { + @cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}}; + if (@cppFiles == 1) { + $mocFiles{$mocFile} .= "\035" . $cppFiles[0]; + push(@depend, $mocFile); + } elsif (@cppFiles == 0) { + push (@newObs, $mocFile); # Produce new object file + next if ($haveAutomocTag); # This is expected... + # But this is an error we can deal with - let them know + print STDERR + "Warning: No c++ file that includes $mocFile.moc\n"; + } else { + # We can't decide which file to use, so it's fatal. Although as a + # guess we could use the mocFile.cpp file if it's in the list??? + print STDERR + "Error: Multiple c++ files that include $mocFile.moc\n"; + print STDERR "\t",join ("\t", @cppFiles),"\n"; + $errorflag = 1; + delete $mocFiles{$mocFile}; + # Let's continue and see what happens - They have been told! + } + } +} + +#----------------------------------------------------------------------------- + +# Add the rules for generating moc source from header files +# For Automoc output *.moc.cpp but normally we'll output *.moc +# (We must compile *.moc.cpp separately. *.moc files are included +# in the appropriate *.cpp file by the programmer) +sub addMocRules () +{ + my $cppFile; + my $hFile; + + foreach $mocFile (keys (%mocFiles)) + { + undef $cppFile; + ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3); + $dir =~ s#^\.#\$(srcdir)#; + if (defined ($cppFile)) + { + $cppFile =~ s,\.[^.]*$,,; + $target_adds{"$cppFile.o"} .= "$mocFile.moc "; + $target_adds{"$cppFile.lo"} .= "$mocFile.moc "; + appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n"); + $cleanMoc .= " $mocFile.moc"; + appendLines ("mocs: $mocFile.moc\n"); + } + else + { + appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n"); + $cleanMoc .= " $mocFile$mocExt"; + appendLines ("mocs: $mocFile$mocExt\n"); + } + } +} + +sub make_bcheck_target() +{ + my $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; + my $bcheckdep = "bcheck-am"; + $bcheckdep = "bcheck-recursive" if ($MakefileData =~ /\n$lookup/); + + my $headers= ""; + $headers = $1 if($MakefileData =~ /\nHEADERS\s*=[ \t]*(.+)/); + $headers =~ s/\$\((?:noinst|EXTRA)_HEADERS\)//g; + + $target_adds{"clean-am"} .= "clean-bcheck "; + + my $t = "clean-bcheck: \n" . + "\trm -f *.bchecktest.cc *.bchecktest.cc.class a.out\n\n" . + "bcheck: $bcheckdep\n\n" . + "bcheck-am:\n" . + "\t\@for i in $headers; do \\\n" . + "\t if test \$(srcdir)/\$\$i -nt \$\$i.bchecktest.cc; then \\\n" . + "\t echo \"int main() {return 0;}\" > \$\$i.bchecktest.cc ; \\\n" . + "\t echo \"#include \\\"\$\$i\\\"\" >> \$\$i.bchecktest.cc ; \\\n" . + "\t echo \"\$\$i\"; \\\n" . + "\t if ! "; + $t .= $cxxsuffix eq "KKK" ? + "\$(CXX) \$(DEFS) -I. -I\$(srcdir) -I\$(top_builddir) \$(INCLUDES) \$(AM_CPPFLAGS) \$(CPPFLAGS) \$(CXXFLAGS) \$(KDE_CXXFLAGS) " : + "\$(CXXCOMPILE) "; + $t .= " --dump-class-hierarchy -c \$\$i.bchecktest.cc; then \\\n" . + "\t rm -f \$\$i.bchecktest.cc; exit 1; \\\n" . + "\t fi ; \\\n" . + "\t echo \"\" >> \$\$i.bchecktest.cc.class; \\\n" . + "\t perl \$(top_srcdir)/admin/bcheck.pl \$\$i.bchecktest.cc.class || { rm -f \$\$i.bchecktest.cc; exit 1; }; \\\n" . + "\t rm -f a.out; \\\n" . + "\t fi ; \\\n" . + "\tdone\n"; + appendLines("$t\n"); +} + +sub make_meta_classes () +{ + return if ($kdeopts{"qtonly"}); + + my $cppFile; + my $hFile; + my $moc_class_headers = ""; + foreach $program (@programs) { + my $mocs = ""; + my @progsources = split(/[\034\s]+/, $sources{$program}); + my @depmocs = split(' ', $dependmocs{$program}); + my %shash = (), %mhash = (); + @shash{@progsources} = 1; # we are only interested in the existence + @mhash{@depmocs} = 1; + + print STDOUT "program=$program\n" if ($verbose); + print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose); + print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose); + print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose); + foreach my $mocFile (keys (%globalmocs)) + { + my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); + if (defined ($cppFile)) + { + $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; + } + else + { + # Bah. This is the case, if no C++ file includes the .moc + # file. We make a .moc.cpp file for that. Unfortunately this + # is not included in the %sources hash, but rather is mentioned + # in %dependmocs. If the user wants to use AUTO he can't just + # use an unspecific METAINCLUDES. Instead he must use + # program_METAINCLUDES. Anyway, it's not working real nicely. + # E.g. Its not clear what happens if user specifies two + # METAINCLUDES=AUTO in the same Makefile.am. + $mocs .= " $mocFile.moc.$cxxsuffix" + if exists $mhash{$mocFile.".moc.$cxxsuffix"}; + } + } + if ($mocs) { + print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose); + } + print STDOUT "\n" if $verbose; + } + if ($moc_class_headers) { + appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes "; + } +} + +#----------------------------------------------------------------------------- + +sub updateMakefile () +{ + return if ($dryrun); + + open (FILEOUT, "> $makefile") + || die "Could not create $makefile: $!\n"; + + $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines + # Append our $progId line, _below_ the "generated by automake" line + # because automake-1.6 relies on the first line to be his own. + my $progIdLine = "\# $progId - " . '$Revision: 483858 $ '."\n"; + if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) { + warn "automake line not found in $makefile\n"; + # Fallback: first line + print FILEOUT $progIdLine; + }; + print FILEOUT $MakefileData; + close FILEOUT; +} + +#----------------------------------------------------------------------------- + +# The given line needs to be removed from the makefile +# Do this by adding the special "removed line" comment at the line start. +sub removeLine ($$) +{ + my ($lookup, $old) = @_; + + $old =~ s/\034/\\\n#>- /g; # Fix continuation lines + $MakefileData =~ s/\n$lookup/\n#>\- $old/; +} + +#----------------------------------------------------------------------------- + +# Replaces the old line with the new line +# old line(s) are retained but tagged as removed. The new line(s) have the +# "added" tag placed before it. +sub substituteLine ($$) +{ + my ($lookup, $new) = @_; + + if ($MakefileData =~ /\n($lookup)/) { + $old = $1; + $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines + my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; + $new =~ s/\\\n/\034/g; + $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/; + } else { + warn "Warning: substitution of \"$lookup\" in $printname failed\n"; + } +} + +#----------------------------------------------------------------------------- + +# Slap new lines on the back of the file. +sub appendLines ($) +{ + my ($new) = @_; + my $copynew = $new; + my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; + $new =~ s/\\\n/\034/g; # Fix continuation lines + $MakefileData .= "\n#>\+ $newCount\n$new"; +} + +#----------------------------------------------------------------------------- + +# Restore the Makefile.in to the state it was before we fiddled with it +sub restoreMakefile () +{ + $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g; + # Restore removed lines + $MakefileData =~ s/([\n\034])#>\- /$1/g; + # Remove added lines + while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/) + { + my $newCount = $1; + my $removeLines = ""; + while ($newCount--) { + $removeLines .= "[^\n\034]*([\n\034]|)"; + } + $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/; + } +} + +#----------------------------------------------------------------------------- + +# find the .kcfg file listed in the .kcfgc file +sub findKcfgFile($) +{ + my ($kcfgf) = @_; + open (KCFGFIN, $kcfgf) || die "Could not open $kcfgf: $!\n"; + seek(KCFGFIN, 0, 2); + my $kcfgfsize = tell(KCFGFIN); + seek(KCFGFIN, 0, 0); + read KCFGFIN, $kcfgfData, $kcfgfsize; + close KCFGFIN; + if(($kcfgfData =~ m/^File=(.*\.kcfg)/gm)) { + $kcfg = $1; + } +} diff --git a/admin/bcheck.pl b/admin/bcheck.pl new file mode 100644 index 0000000..cca973e --- /dev/null +++ b/admin/bcheck.pl @@ -0,0 +1,157 @@ +#!/usr/bin/perl -w + +use DB_File; +use Fcntl ':flock'; + +if (!defined($ARGV[0])) { + print "usage: requires .class dump as parameter!\n"; + exit; +} + +sub bailout +{ + untie %bcheckdb if(defined(%bcheckdb)); + + if(defined(MYLOCK)) { + flock MYLOCK, LOCK_UN; + close(MYLOCK); + } + + print @_; + exit 5; +} + +sub ask_user +{ + my ($dbkey, $dbchunk) = @_; + + if (defined($ENV{"BCHECK_UPDATE"})) { + $bcheckdb{$dbkey} = $dbchunk; + return; + } + + &bailout("BC problem detected") if (! -t STDIN); + + print "(I)gnore / (Q)uit / (U)pdate: "; + + my $key; + while(defined(read STDIN, $key, 1)) { + $key = lc($key); + + print "got: >$key<\n"; + + return if ($key eq 'i'); + + &bailout("BC problem. aborted") if ($key eq 'q'); + + if ($key eq 'u') { + $bcheckdb{$dbkey} = $dbchunk; + return; + } + print "\n(I)gnore / (Q)uit / (U)pdate: "; + } +} + +sub diff_chunk($$) +{ + my ($oldl, $newl) = @_; + my @old = split /^/m, $oldl; + my @new = split /^/m, $newl; + my $haschanges = 0; + my $max = $#old > $#new ? $#old : $#new; + + die "whoops. key different" if ($old[0] ne $new[0]); + + if ($#old != $#new) { + warn ("Structural difference.\n"); + print @old; + print "-----------------------------------------------\n"; + print @new; + $haschanges = 1; + return $haschanges; + } + + print $old[0]; + + my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/); + + my $c = 1; + while ($c < $max) { + my ($o, $n) = ($old[$c], $new[$c]); + chomp $o; + chomp $n; + $c++; + next if ($o eq $n); + + if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) { + next if ($n eq "$1$class$2"); + } + + $haschanges = 1; + + print "-$o\n+$n\n\n"; + } + + return $haschanges; +} + +local $dblock = $ENV{"HOME"} . "/bcheck.lock"; +my $dbfile = $ENV{"HOME"} . "/bcheck.db"; +my $cdump = $ARGV[0]; + +die "file $cdump is not readable: $!" if (! -f $cdump); + +# make sure the advisory lock exists +open(MYLOCK, ">$dblock"); +print MYLOCK ""; + +flock MYLOCK, LOCK_EX; + +tie %bcheckdb, 'DB_File', $dbfile; + +my $chunk = ""; + +open (IN, "<$cdump") or die "cannot open $cdump: $!"; +while () { + + chop; + + s/0x[0-9a-fA-F]+/0x......../g; + s/base size=/size=/g; + s/\(\)\s*$//g; + s/base align=/align=/g; + + $chunk .= $_ . "\n"; + + if(/^\s*$/) { + my @lines = split /^/m, $chunk; + my $key = $lines[0]; + chomp $key; + + if($key !~ // && + $key !~ //) { + if(defined($bcheckdb{$key})) { + my $dbversion = $bcheckdb{$key}; + + if($dbversion ne $chunk) { + &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk)); + } + } + else { + $bcheckdb{$key} = $chunk; + print "NEW: $key\n"; + } + } + + $chunk = ""; + next; + } + +} +close(IN); + +untie %bcheckdb; +flock MYLOCK, LOCK_UN; +close(MYLOCK); + +exit 0; diff --git a/admin/compile b/admin/compile new file mode 100755 index 0000000..1b1d232 --- /dev/null +++ b/admin/compile @@ -0,0 +1,142 @@ +#! /bin/sh +# Wrapper for compilers which do not understand `-c -o'. + +scriptversion=2005-05-14.22 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; +esac + +ofile= +cfile= +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/conf.change.pl b/admin/conf.change.pl new file mode 100644 index 0000000..129d759 --- /dev/null +++ b/admin/conf.change.pl @@ -0,0 +1,191 @@ +#!/usr/bin/env perl + +# this script patches a config.status file, to use our own perl script +# in the main loop +# we do it this way to circumvent hacking (and thereby including) +# autoconf function (which are GPL) into our LGPL acinclude.m4.in +# written by Michael Matz +# adapted by Dirk Mueller +# +# This file is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public +# License as published by the Free Software Foundation; either +# version 2 of the License, or (at your option) any later version. + +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. + +# You should have received a copy of the GNU Library General Public License +# along with this library; see the file COPYING.LIB. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +# we have to change two places +# 1. the splitting of the substitutions into chunks of 90 (or even 48 in +# later autoconf's +# 2. the big main loop which patches all Makefile.in's + +use strict; +use File::Basename; + +my $ac_aux_dir = dirname($0); +my ($flag); +my $ac_version = 0; +my $vpath_seen = 0; +$flag = 0; + +while (<>) { +# usage of $flag: 0 -- we have seen nothing yet +# 1 -- we are in (1) +# 2 -- we have ended (1) +# 3 -- we are in (2) +# 4 -- we ended (2) + + if ($flag == 4) { + print; + } elsif ($flag == 0) { +# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..." +# ends with (excluding) "CONFIG_FILE=..." +# in later autoconf (2.14.1) there is no CONFIG_FILES= line, +# but instead the (2) directly follow (1) + if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) { + $flag = 1; + if ($1 eq 'lines') { + # lets hope its different with 2141, + # wasn't able to verify that + if ($2 eq '48') { + $ac_version = 250; + } + else { + $ac_version = 2141; + } + } elsif ($1 eq 'cmds') { + $ac_version = 213; + } + # hmm, we don't know the autoconf version, but we try anyway + } else { + print; + } + } elsif ($flag == 1) { + if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) { + print; + $flag = 2; + } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { + $flag = 3; + } + } elsif ($flag == 2) { +# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1)) +# end with: "rm -f conftest.s\*" +# on autoconf 250, it ends with '# CONFIG_HEADER section' +# +# gg: if a post-processing commands section is found first, +# stop there and insert a new loop to honor the case/esac. +# (pattern: /^\s+#\sRun the commands associated with the file./) + + if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { + $flag = 3; + } else { + print; + } + } elsif ($flag == 3) { + if (/^\s*rm\s+-f\s+conftest/ ) { + $flag = 4; + &insert_main_loop(); + } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) { + $flag = 4; + &insert_main_loop(); + #die "hhhhhhh"; + if ($ac_version != 2141) { + print STDERR "hmm, don't know autoconf version\n"; + } + } elsif (/^\#\s*CONFIG_(HEADER|COMMANDS) section.*|^\s+#\s(Run) the commands associated/) { + $flag = 4; + my $commands = defined $2; + &insert_main_loop(); + $commands && insert_command_loop(); + if($ac_version != 250) { + print STDERR "hmm, something went wrong :-(\n"; + } + } elsif (/VPATH/ ) { + $vpath_seen = 1; + } + } +} + +die "wrong input (flag != 4)" unless $flag == 4; +print STDERR "hmm, don't know autoconf version\n" unless $ac_version; + +sub insert_main_loop { + + if ($ac_version == 250) { + &insert_main_loop_250(); + } + else { + &insert_main_loop_213(); + } +} + +sub insert_main_loop_250 { + + print <>\$tmp/subs.sed +EOF + } + print <> \$tmp/subs.files + fi + done + if test -f \$tmp/subs.files ; then + perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL" + fi + rm -f \$tmp/subs.files + +fi +EOF + return; +} + +sub insert_main_loop_213 { + print <> \$ac_cs_root.subs +EOF + } + print <> \$ac_cs_root.sacfiles + fi +done +if test -f \$ac_cs_root.sacfiles ; then + perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL" +fi +rm -f \$ac_cs_root.s* + +EOF + return; +} + +sub insert_command_loop { + print <. +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + *86) UNAME_PROCESSOR=i686 ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/admin/config.pl b/admin/config.pl new file mode 100644 index 0000000..c2b0517 --- /dev/null +++ b/admin/config.pl @@ -0,0 +1,238 @@ +#!/usr/bin/env perl +# a script for use by autoconf to make the Makefiles +# from the Makefile.in's +# +# the original autoconf mechanism first splits all substitutions into groups +# of ca. 90, and than invokes sed for _every_ Makefile.in and every group +# (so around 2-3 times per Makefile.in). So this takes forever, as sed +# has to recompile the regexps every time. +# +# this script does better. It changes all Makefile.ins in one process. +# in kdelibs the time for building Makefile went down from 2:59 min to 13 sec! +# +# written by Michael Matz +# adapted by Dirk Mueller + +# This file is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public +# License as published by the Free Software Foundation; either +# version 2 of the License, or (at your option) any later version. + +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. + +# You should have received a copy of the GNU Library General Public License +# along with this library; see the file COPYING.LIB. If not, write to +# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +use strict; + +use File::Path; + +my $ac_subs=$ARGV[0]; +my $ac_sacfiles = $ARGV[1]; +my $ac_given_srcdir=$ARGV[2]; +my $ac_given_INSTALL=$ARGV[3]; + +my @comp_match; +my @comp_subs; + +#print "ac_subs=$ac_subs\n"; +#print "ac_sacfiles=$ac_sacfiles\n"; +#print "ac_given_srcdir=$ac_given_srcdir\n"; +#print "ac_given_INSTALL=$ac_given_INSTALL\n"; + +my $configure_input; +my ($srcdir, $top_srcdir); +my $INSTALL; +my $bad_perl = ($] < 5.005); +my $created_file_count = 0; + +open(CF, "< $ac_subs") || die "can't open $ac_subs: $!"; +my @subs = ; +my $pat; +close(CF); +chomp @subs; +@comp_match=(); +@comp_subs=(); + +if ($bad_perl) { + print "Using perl older than version 5.005\n"; + foreach $pat (@subs) { + if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ ) + || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ ) + || ($pat =~ m/s,([^,]*),(.*),;t/) + || ($pat =~ m%s/([^/]*)/([^/]*)/g% ) + || ($pat =~ m%s/([^/]*)/([^/]*)/;t% ) + ) { + # form : s%bla%blubb%g + # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) + # or s,bla,blubb,;t t (autoconf 2.52) + my $srch = $1; + my $repl = $2; + $repl =~ s/\\(.)/$1/g; + push @comp_subs, make_closure($srch, $repl); + + } elsif ( ($pat =~ /%([^%]*)%d/ ) + || ($pat =~ m%/([^/]*)/d% ) + ) { + push @comp_subs, make_closure($1, ""); + } else { + die "Uhh. Malformed pattern in $ac_subs ($pat)" + unless ( $pat =~ /^\s*$/ ); # ignore white lines + } + } +} else { + foreach $pat (@subs) { + if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || + ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || + ($pat =~ /s,([^,]*),(.*),;t/) ) { + # form : s%bla%blubb%g + # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) + # or s,bla,blubb,;t t (autoconf 2.52) + my $srch = $1; + my $repl = $2; + push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern + $repl =~ s/\\(.)/$1/g; + push @comp_subs, $repl; + } elsif ( ($pat =~ /%([^%]*)%d/ ) + || ($pat =~ m%/([^/]*)/d% ) + ) { + push @comp_match, eval "qr/\Q$1\E/"; + push @comp_subs, ""; + } else { + die "Uhh. Malformed pattern in $ac_subs ($pat)" + unless ( $pat =~ /^\s*$/ ); # ignore white lines + } + } +} +undef @subs; + +# read the list of files to be patched, form: +# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile + +open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!"; +my @ac_files = ; +close(CF); +chomp @ac_files; + + +my $ac_file; +foreach $ac_file (@ac_files) { + next if $ac_file =~ /\.\./; + next if $ac_file =~ /^\s*$/; + my $ac_file_in; + my ($ac_dir, $ac_dots, $ac_dir_suffix); + + if ($ac_file =~ /.*:.*/ ) { + ($ac_file_in = $ac_file) =~ s%[^:]*:%%; + $ac_file =~ s%:.*%%; + } else { + $ac_file_in = $ac_file.".in"; + } + +# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + +# Remove last slash and all that follows it. Not all systems have dirname. + ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%; + if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) { +# The file is in a subdirectory. + if (! -d "$ac_dir") { mkpath "$ac_dir", 0, 0777; } + ($ac_dir_suffix = $ac_dir) =~ s%^./%%; + $ac_dir_suffix="/".$ac_dir_suffix; +# A "../" for each directory in $ac_dir_suffix. + ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g; + } else { + $ac_dir_suffix=""; + $ac_dots=""; + } + + if ($ac_given_srcdir eq ".") { + $srcdir="."; + if ($ac_dots) { + ( $top_srcdir = $ac_dots) =~ s%/$%%; + } else { $top_srcdir="."; } + } elsif ($ac_given_srcdir =~ m%^/%) { + $srcdir=$ac_given_srcdir.$ac_dir_suffix; + $top_srcdir = $ac_given_srcdir; + } else { + $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix; + $top_srcdir = $ac_dots.$ac_given_srcdir; + } + + if ($ac_given_INSTALL) { + if ($ac_given_INSTALL =~ m%^/% ) { + $INSTALL = $ac_given_INSTALL; + } else { + $INSTALL = $ac_dots.$ac_given_INSTALL; + } + } + + print "fast creating $ac_file\n"; + unlink $ac_file; + my $ac_comsub=""; + my $fname=$ac_file_in; + $fname =~ s%.*/%%; + $configure_input="$ac_file. Generated from $fname by config.pl."; + + my $ac_file_inputs; + ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%; + $ac_file_inputs =~ s%:% $ac_given_srcdir/%g; + + patch_file($ac_file, $ac_file_inputs); + ++$created_file_count; +} + +print "config.pl: fast created $created_file_count file(s).\n"; + +sub patch_file { + my ($outf, $infiles) = @_; + my $filedata; + my @infiles=split(' ', $infiles); + my $i=0; + my $name; + + foreach $name (@infiles) { + if (open(CF, "< $name")) { + while () { + $filedata .= $_; + } + close(CF); + } else { + print STDERR "can't open $name: $!"."\n"; + } + } + + $filedata =~ s%\@configure_input\@%$configure_input%g; + $filedata =~ s%\@srcdir\@%$srcdir%g; + $filedata =~ s%\@top_srcdir\@%$top_srcdir%g; + $filedata =~ s%\@INSTALL\@%$INSTALL%g; + + if ($bad_perl) { + while ($i <= $#comp_subs) { + my $ref = $comp_subs[$i]; + &$ref(\$filedata); + $i++; + } + } else { + while ($i <= $#comp_match) { + $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g; + $i++; + } + } + open(CF, "> $outf") || die "can't create $outf: $!"; + print CF $filedata; + close(CF); +} + +sub make_closure { + my ($pat, $sub) = @_; + my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%\Q$pat\E%\Q$sub\E%g; }"; + if ($@) { + print "can't create CODE: $@\n"; + } + return $ret; +} diff --git a/admin/config.sub b/admin/config.sub new file mode 100755 index 0000000..2ef2842 --- /dev/null +++ b/admin/config.sub @@ -0,0 +1,1575 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + +timestamp='2005-07-01' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | ms1 \ + | msp430 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m32c) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | ms1-* \ + | msp430-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + m32c-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* | -skyos*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/admin/configure.in.bot.end b/admin/configure.in.bot.end new file mode 100644 index 0000000..1bc030b --- /dev/null +++ b/admin/configure.in.bot.end @@ -0,0 +1,45 @@ +# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure +if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then + # And if so, warn when they don't match + if test "$kde_libs_prefix" != "$given_prefix"; then + # And if kde doesn't know about the prefix yet + echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null + if test $? -ne 0; then + echo "" + echo "Warning: you chose to install this package in $given_prefix," + echo "but KDE was found in $kde_libs_prefix." + echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" + echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" + echo "Then restart KDE." + echo "" + fi + fi +fi + +if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then + echo "" + echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" + echo "was not included. Therefore, GCC symbol visibility support remains disabled." + echo "" + echo "For better performance, consider including the Qt visibility supporting patch" + echo "located at:" + echo "" + echo "http://bugs.kde.org/show_bug.cgi?id=109386" + echo "" + echo "and recompile all of Qt and KDE. Note, this is entirely optional and" + echo "everything will continue to work just fine without it." + echo "" +fi + +if test "$all_tests" = "bad"; then + if test ! "$cache_file" = "/dev/null"; then + echo "" + echo "Please remove the file $cache_file after changing your setup" + echo "so that configure will find the changes next time." + echo "" + fi +else + echo "" + echo "Good - your configure finished. Start make now" + echo "" +fi diff --git a/admin/configure.in.min b/admin/configure.in.min new file mode 100644 index 0000000..0dfe378 --- /dev/null +++ b/admin/configure.in.min @@ -0,0 +1,57 @@ +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +dnl Boston, MA 02110-1301, USA. + +# Original Author was Kalle@kde.org +# I lifted it in some mater. (Stephan Kulow) +# I used much code from Janos Farkas + +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(acinclude.m4) dnl a source file from your sub dir + +dnl This is so we can use kde-common +AC_CONFIG_AUX_DIR(admin) + +dnl This ksh/zsh feature conflicts with `cd blah ; pwd` +unset CDPATH + +dnl Checking host/target/build systems, for make, install etc. +AC_CANONICAL_SYSTEM +dnl Perform program name transformation +AC_ARG_PROGRAM + +dnl Automake doc recommends to do this only here. (Janos) +AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs + +KDE_SET_PREFIX + +dnl generate the config header +AM_CONFIG_HEADER(config.h) dnl at the distribution this done + +dnl Checks for programs. +AC_CHECK_COMPILERS +AC_ENABLE_SHARED(yes) +AC_ENABLE_STATIC(no) +KDE_PROG_LIBTOOL + +dnl for NLS support. Call them in this order! +dnl WITH_NLS is for the po files +AM_KDE_WITH_NLS + +dnl KDE_USE_QT +AC_PATH_KDE diff --git a/admin/cvs.sh b/admin/cvs.sh new file mode 100644 index 0000000..6bb1e60 --- /dev/null +++ b/admin/cvs.sh @@ -0,0 +1,661 @@ +#! /bin/sh +# +# cvs.sh +# +# This file contains support code from Makefile.common +# It defines a shell function for each known target +# and then does a case to call the correct function. + +unset MAKEFLAGS + +call_and_fix_autoconf() +{ + $AUTOCONF || exit 1 + if test -r configure.in.in ; then + perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ + \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ + \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ + \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ + \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/; s,^#line.*LINENO.*\$,/* \$& */, ;" configure + fi +} + +strip_makefile() +{ + if test ! -f $makefile_wo; then + perl -e '$in=0; while ( <> ) { $in = 1 if ($_ =~ m/^if / ); print $_ unless ($in || $_ =~ m/^include /); $in = 0 if ($_ =~ m/^endif/); }' < $makefile_am > $makefile_wo + fi +} + +check_autotool_versions() +{ +required_autoconf_version="2.53 or newer" +AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1` +case $AUTOCONF_VERSION in + Autoconf*2.5* | autoconf*2.5* | autoconf*2.6* ) : ;; + "" ) + echo "*** AUTOCONF NOT FOUND!." + echo "*** KDE requires autoconf $required_autoconf_version" + exit 1 + ;; + * ) + echo "*** YOU'RE USING $AUTOCONF_VERSION." + echo "*** KDE requires autoconf $required_autoconf_version" + exit 1 + ;; +esac + +AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1` +case $AUTOHEADER_VERSION in + Autoconf*2.5* | autoheader*2.5* | autoheader*2.6* ) : ;; + "" ) + echo "*** AUTOHEADER NOT FOUND!." + echo "*** KDE requires autoheader $required_autoconf_version" + exit 1 + ;; + * ) + echo "*** YOU'RE USING $AUTOHEADER_VERSION." + echo "*** KDE requires autoheader $required_autoconf_version" + exit 1 + ;; +esac + +AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` +required_automake_version="1.6.1 or newer" +case $AUTOMAKE_STRING in + automake*1.5d* | automake*1.5* | automake*1.5-* ) + echo "*** YOU'RE USING $AUTOMAKE_STRING." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; + automake*1.6.* | automake*1.7* | automake*1.8* | automake*1.9* | automake*1.10*) + echo "*** $AUTOMAKE_STRING found." + UNSERMAKE=no + ;; + "" ) + echo "*** AUTOMAKE NOT FOUND!." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; + *unsermake* ) : + echo "*** YOU'RE USING UNSERMAKE." + echo "*** GOOD LUCK!! :)" + UNSERMAKE=unsermake + ;; + * ) + echo "*** YOU'RE USING $AUTOMAKE_STRING." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; +esac +unset required_automake_version +} + +cvs() +{ +check_autotool_versions +acinclude_m4 + +### Make new subdirs and configure.in. +### The make calls could be optimized away here, +### with a little thought. +if test -r configure.in.in; then + rm -f configure.in + echo "*** Creating list of subdirectories" + create_subdirs + + if test -r Makefile.am.in; then + echo "*** Creating Makefile.am" + if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 + else + Makefile_am + fi + fi + configure_files + echo "*** Creating configure.in" + if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 + else + configure_in + fi +fi + +echo "*** Creating aclocal.m4" +$ACLOCAL $ACLOCALFLAGS || exit 1 +echo "*** Creating configure" +call_and_fix_autoconf + +if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then + echo "*** Creating config.h template" + $AUTOHEADER || exit 1 + touch config.h.in +fi + +echo "*** Creating Makefile templates" +$AUTOMAKE || exit 1 + +if test "$UNSERMAKE" = no; then + echo "*** Postprocessing Makefile templates" + perl -w admin/am_edit || exit 1 +fi + +if egrep "^cvs-local:" $makefile_am >/dev/null; then \ + strip_makefile + $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 +fi + +echo "*** Creating date/time stamp" +touch stamp-h.in + +echo "*** Finished" +echo " Don't forget to run ./configure" +echo " If you haven't done so in a while, run ./configure --help" +} + +dist() +{ +check_autotool_versions + +### +### First build all of the files necessary to do just "make" +### +acinclude_m4 +if test -r configure.in.in; then + rm -f configure.in + create_subdirs + + if test -r Makefile.am.in; then + if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 + else + Makefile_am + fi + fi + configure_files + if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 + else + configure_in + fi +fi +$ACLOCAL $ACLOCALFLAGS +if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then + echo "*** Creating config.h template" + $AUTOHEADER || exit 1 + touch config.h.in +fi +$AUTOMAKE --foreign || exit 1 +if test "$UNSERMAKE" = no; then + echo "*** Postprocessing Makefile templates" + perl -w admin/am_edit || exit 1 +fi +call_and_fix_autoconf +touch stamp-h.in +if grep "^cvs-local:" $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo cvs-local top_srcdir=. +fi + +### +### Then make messages +### +if test -d po; then + LIST=`find ./po -name "*.po"` + for i in $LIST; do + file2=`echo $i | sed -e "s#\.po#\.gmo#"` + msgfmt -o $file2 $i || touch $file2 + done +fi +if grep "^cvs-dist-local:" $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. +fi +} + +subdir_dist() +{ +$ACLOCAL $ACLOCALFLAGS +$AUTOHEADER +touch config.h.in +$AUTOMAKE +AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` +case $AUTOMAKE_STRING in + *unsermake* ) : + ;; + *) + perl -w ../admin/am_edit --path=../admin +esac +call_and_fix_autoconf +touch stamp-h.in +} + +configure_in() +{ +rm -f configure.in configure.in.new +kde_use_qt_param= +test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } +list=`fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` +: > configure.in.new +for file in $list; do + echo "dnl =======================================================" >> configure.in.new + echo "dnl FILE: $file" >> configure.in.new + echo "dnl =======================================================" >> configure.in.new + echo "" >> configure.in.new + cat $file >> configure.in.new +done +echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new +if test -f Makefile.am.in; then + subdirs=`cat subdirs` + for dir in $subdirs; do + vdir=`echo $dir | sed -e 's,[-+.@],_,g'` + echo "AM_CONDITIONAL($vdir""_SUBDIR_included, test \"x\$$vdir""_SUBDIR_included\" = xyes)" >> configure.in.new + if test -f "$dir/configure.in"; then + echo "if test \"x\$$vdir""_SUBDIR_included\" = xyes; then " >> configure.in.new + echo " AC_CONFIG_SUBDIRS($dir)" >> configure.in.new + echo "fi" >> configure.in.new + fi + done +fi + +echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new + +if test -f inst-apps; then + topleveldirs=`cat inst-apps` +else + topleveldirs= + for dir in `ls -1d * | sort`; do + if test "$dir" != "debian" && test -d $dir; then + topleveldirs="$topleveldirs $dir" + fi + done +fi + +for topleveldir in $topleveldirs; do + if test -f $topleveldir/configure.in; then + continue + fi + if test -f $topleveldir/Makefile.am; then :; else + continue + fi + + mfs=`find $topleveldir -follow -name Makefile.am -print | fgrep -v "/." | \ + sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'` + for i in $mfs; do + echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new + done +done + +files=`cat configure.files` +list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` +for file in $list; do + echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new +done + +midfiles=`cat configure.files | fgrep "configure.in.mid"` +test -n "$midfiles" && cat $midfiles >> configure.in.new + +echo "AC_OUTPUT" >> configure.in.new +modulename= +if test -f configure.in.in; then + if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then + kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` + fi + if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then + line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` + if test -n "$line"; then + modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` + VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` + fi + sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ + configure.in.new > configure.in && mv configure.in configure.in.new + fi +fi +if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then + VERSION="\"3.5.7\"" +fi +if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then + modulename=`pwd`; + modulename=`basename $modulename` + esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` + modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` + +fi +if test -n "$kde_use_qt_param"; then + sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ + configure.in.new > configure.in && mv configure.in configure.in.new +fi +sed -e "s#@MODULENAME@#$modulename#" configure.in.new | + sed -e "s#@VERSION@#$VERSION#" > configure.in +botfiles=`cat configure.files | egrep "configure.in.bot"` +test -n "$botfiles" && cat $botfiles >> configure.in +cat $admindir/configure.in.bot.end >> configure.in +rm -f configure.in.new +} + +configure_files() +{ +echo "*** Creating configure.files" +admindir=NO +for i in . .. ../.. ../../..; do + if test -x $i/admin; then admindir=$i/admin; break; fi +done +rm -f configure.files +touch configure.files +if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then + echo $admindir/configure.in.min >> configure.files +fi +test -f configure.in.in && echo configure.in.in >> configure.files +# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs +if test -f inst-apps; then + inst=`cat inst-apps` + list="" + for i in $inst; do + list="$list `find $i/ -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ + sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`" + done +else + list=`find . -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ + sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"` +fi +for i in $list; do if test -f $i && test `dirname $i` != "." ; then + echo $i >> configure.files +fi; done +test -f configure.in.mid && echo configure.in.mid >> configure.files +test -f configure.in.bot && echo configure.in.bot >> configure.files +if test ! -s configure.files; then + echo "There are no files to build a configure. Please check your checkout." + exit 1 +fi +} + +create_subdirs() +{ +if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then + # as many modules contain rules to create subdirs without any + # dependencies make won't create it unless there is no file. + # so we check if that's a dummy rule or one that works + rm -f subdirs.cvs.sh.$$ + if test -f subdirs; then + mv subdirs subdirs.cvs.sh.$$ + fi + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1 + if test -f subdirs.cvs.sh.$$; then + if test -s subdirs; then + rm subdirs.cvs.sh.$$ + else + mv subdirs.cvs.sh.$$ subdirs + fi + fi +else + subdirs +fi +} + +subdirs() +{ +dirs= +idirs= +if test -f inst-apps; then + idirs=`cat inst-apps` +else + idirs=`ls -1 | sort` +fi + +compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` +compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` +for i in $idirs; do + if test -f $i/Makefile.am; then + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + fi +done + +: > ./_SUBDIRS + +for d in $compilefirst; do + echo $d >> ./_SUBDIRS +done + +(for d in $dirs; do + list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` + for s in $list; do + echo $s $d + done + list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` + for s in $list; do + echo $d $s + done + echo $d $d +done ) | tsort >> ./_SUBDIRS + +for d in $compilelast; do + echo $d >> ./_SUBDIRS +done + +if test -r subdirs && cmp -s subdirs _SUBDIRS; then + rm -f _SUBDIRS +fi +test -r _SUBDIRS && mv _SUBDIRS subdirs || true +} + +Makefile_am() +{ +if test -f Makefile.am.in; then + compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` + compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` + + idirs= + dirs= + if test -f inst-apps; then + idirs=`cat inst-apps` + else + idirs=`cat subdirs` + fi + for i in $idirs; do + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + done + + adds=`fgrep '$(top_srcdir)/acinclude.m4:' Makefile.am.in | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir)/,,g'` + if echo "$adds" | fgrep "*" >/dev/null ; then + adds=`ls -d -1 $adds 2>/dev/null` + fgrep -v '$(top_srcdir)/acinclude.m4:' Makefile.am.in > Makefile.am.in.adds + str='$(top_srcdir)/acinclude.m4:' + for add in $adds; do + str="$str \$(top_srcdir)/$add" + done + echo $str >> Makefile.am.in.adds + else + cat Makefile.am.in > Makefile.am.in.adds + fi + + cat Makefile.am.in.adds | \ + sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ + sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am + echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am + rm Makefile.am.in.adds +fi +} + +acinclude_m4() +{ + echo "*** Creating acinclude.m4" + adds= + if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then + strip_makefile + rm -f acinclude.m4 + adds=`grep '\$(top_srcdir)/acinclude.m4:' $makefile_wo | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir),.,g'` + if echo $adds | fgrep "*" >/dev/null ; then + adds=`ls -d -1 $adds 2>/dev/null` + else + $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 || exit 1 + fi + else + rm -f acinclude.m4 + fi + # if it wasn't created up to now, then we do it better + if test ! -f acinclude.m4; then + cat admin/acinclude.m4.in admin/libtool.m4.in admin/pkg.m4.in $adds > acinclude.m4 + fi +} + +package_merge() +{ +catalogs=$POFILES +for cat in $catalogs; do + msgmerge -o $cat.new $cat $PACKAGE.pot + if test -s $cat.new; then + grep -v "\"POT-Creation" $cat.new > $cat.new.2 + grep -v "\"POT-Creation" $cat >> $cat.new.1 + if diff $cat.new.1 $cat.new.2; then + rm $cat.new + else + mv $cat.new $cat + fi + rm -f $cat.new.1 $cat.new.2 + fi +done +} + +extract_messages() +{ +podir=${podir:-$PWD/po} +files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` +dirs=`for i in $files; do echo \`dirname $i\`; done` +tmpname="$PWD/messages.log" +if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi +if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi +export EXTRACTRC PREPARETIPS + +for subdir in $dirs; do + test -z "$VERBOSE" || echo "Making messages in $subdir" + (cd $subdir + if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then + $EXTRACTRC *.rc *.ui *.kcfg > rc.cpp + else + candidates=`ls -1 *.rc *.ui *.kcfg 2>/dev/null` + if test -n "$candidates"; then + echo "$subdir has *.rc, *.ui or *.kcfg files, but not correct messages line" + fi + fi + if find . -name \*.c\* -o -name \*.h\* | fgrep -v ".svn" | xargs fgrep -s -q KAboutData ; then + echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp + else echo " " > _translatorinfo.cpp + fi + perl -e '$mes=0; while () { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile + + kdepotpath=${includedir:-`kde-config --expandvars --install include`}/kde.pot + if ! test -f $kdepotpath; then + kdepotpath=`kde-config --expandvars --prefix`/include/kde.pot + fi + + $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" srcdir=. \ + XGETTEXT="${XGETTEXT:-xgettext} --foreign-user -C -ci18n -ki18n -ktr2i18n -kI18N_NOOP -kI18N_NOOP2 -kaliasLocale -x $kdepotpath" messages + exit_code=$? + if test "$exit_code" != 0; then + echo "make exit code: $exit_code" + fi + ) 2>&1 | grep -v '^make\[1\]' > $tmpname + test -s $tmpname && { echo $subdir ; cat "$tmpname"; } + test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp + rm -f $subdir/_translatorinfo.cpp + rm -f $subdir/_transMakefile +done +rm -f $tmpname +} + +package_messages() +{ +rm -rf po.backup +mkdir po.backup + +for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do + egrep -v '^#[^,]' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i + cat po/$i > po.backup/backup_$i + touch -r po/$i po.backup/backup_$i + rm po/$i +done + +extract_messages + +for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do + test -f po/$i || echo "disappeared: $i" +done +for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do + sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po/$i > po/$i.new && mv po/$i.new po/$i + #msgmerge -q -o po/$i po/$i po/$i + egrep -v '^#[^,]' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot + if test -f po.backup/$i && ! cmp -s temp.pot po.backup/$i; then + echo "will update $i" + else + if test -f po.backup/backup_$i; then + test -z "$VERBOSE" || echo "I'm restoring $i" + mv po.backup/backup_$i po/$i + rm po.backup/$i + else + echo "will add $i" + fi + fi +done +rm -f temp.pot +rm -rf po.backup +} + +# Make sure that sorting is always done the same way +LC_ALL=C +export LC_ALL +unset LANG || : +unset LC_CTYPE || : +unset LANGUAGE || : + +unset CDPATH || : +admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` +test "x$admindir" = "x$0" && admindir=. + +test "x$MAKE" = x && MAKE=make +makefile_am=Makefile.am +makefile_wo=Makefile.am.wo +if test -f Makefile.am.in; then + makefile_am=Makefile.am.in + makefile_wo=Makefile.am.in.wo + rm -f $makefile_wo +fi + +# Call script to find autoconf and friends. Uses eval since the script outputs +# sh-compatible code. +eval `$admindir/detect-autoconf.pl` + +### +### Main +### + +arg=`echo $1 | tr .- __` +case $arg in + cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ + cvs_clean | package_merge | package_messages | Makefile_am | acinclude_m4 | extract_messages ) $arg ;; + configure ) call_and_fix_autoconf ;; + * ) echo "Usage: cvs.sh " + echo "Target can be one of:" + echo " cvs svn dist" + echo " configure.in configure.files" + echo " package-merge package-messages" + echo "" + echo "Usage: anything but $1" + exit 1 ;; +esac + +if test -f $makefile_wo; then + rm $makefile_wo +fi + +exit 0 diff --git a/admin/debianrules b/admin/debianrules new file mode 100755 index 0000000..25897f2 --- /dev/null +++ b/admin/debianrules @@ -0,0 +1,43 @@ +#!/usr/bin/perl -w + +use Shell qw(mv cp mkdir rm) ; +use File::Find; +use Cwd; + +$origPwd = `pwd`; +chomp $origPwd; + +$kde_prefix = "/usr"; +$sysconfdir = "/etc"; +$kde_includedir = "$kde_prefix/include/kde"; +$infodir = "$kde_prefix/share/info"; +$mandir = "$kde_prefix/share/man"; +$qtdir = "/usr/share/qt3"; + +$kde_cgidir = "$kde_prefix/lib/cgi-bin"; +$kde_confdir = "$sysconfdir/kde3"; +$kde_htmldir = "$kde_prefix/share/doc/kde/HTML"; + +if (defined $ENV{DEB_BUILD_OPTIONS} && + $ENV{DEB_BUILD_OPTIONS} =~ /\bnostrip\b/) { + $enable_debug="--enable-debug=full"; +} else { + $enable_debug="--disable-debug"; +} + +if (@ARGV && $ARGV[0] eq 'echodirs') { + print STDOUT "export kde_prefix=$kde_prefix\n"; + print STDOUT "export sysconfdir=$sysconfdir\n"; + print STDOUT "export kde_includedir=$kde_includedir\n"; + print STDOUT "export infodir=$infodir\n"; + print STDOUT "export mandir=$mandir\n"; + print STDOUT "export qtdir=$qtdir\n"; + + print STDOUT "export kde_cgidir=$kde_cgidir\n"; + print STDOUT "export kde_confdir=$kde_confdir\n"; + print STDOUT "export kde_htmldir=$kde_htmldir\n"; + + print STDOUT "configkde=$enable_debug --disable-rpath --prefix=\$(kde_prefix) --sysconfdir=\$(sysconfdir) --includedir=\$(kde_includedir) --infodir=\$(infodir) --mandir=\$(mandir) --with-qt-dir=\$(qtdir)\n"; + + exit +} diff --git a/admin/depcomp b/admin/depcomp new file mode 100755 index 0000000..04701da --- /dev/null +++ b/admin/depcomp @@ -0,0 +1,530 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2005-07-09.11 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/admin/deps.am b/admin/deps.am new file mode 100644 index 0000000..e8f5015 --- /dev/null +++ b/admin/deps.am @@ -0,0 +1,19 @@ +$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh $(top_srcdir)/admin/pkg.m4.in + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4 + +$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in + +$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES) + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh + +$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am + +$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs + +# defining default rules for files that may not be present +$(top_srcdir)/Makefile.am.in: +$(CONF_FILES): + diff --git a/admin/detect-autoconf.pl b/admin/detect-autoconf.pl new file mode 100755 index 0000000..7166bce --- /dev/null +++ b/admin/detect-autoconf.pl @@ -0,0 +1,173 @@ +#!/usr/bin/env perl + +# Try to locate best version of auto* +# By Michael Pyne +# +# Copyright (c) 2005. +# This code is public domain. You may use it however you like (including +# relicensing). + +# Emulate the 'which' program. +sub which +{ + my $prog = shift; + my @paths = split(/:/, $ENV{'PATH'}); + + for $path (@paths) + { + return "$path/$prog" if -x "$path/$prog"; + } + + return ""; +} + +# Subroutine to determine the highest installed version of the given program, +# searching from the given paths. +sub findBest +{ + my ($program, @paths) = @_; + my $best_version_found = '0'; # Deliberately a string. + my %versions; + my %minimumVersions = ( + 'autoconf' => '2.5', + 'automake' => '1.6', + ); + + # Allow user to use environment variable to override search. + return $ENV{uc $program} if $ENV{uc $program}; + + for $prefix (@paths) + { + @files = glob "$prefix/$program*"; + for $file (@files) + { + # Don't check non-executable scripts. + next unless -x $file; + + ($version) = $file =~ /$prefix\/$program-?(.*)$/; + $version =~ s/-|\.//g; + + # Special case some programs to make sure it has a minimum version. + if (not $version and exists $minimumVersions{$program}) + { + my $min_version = $minimumVersions{$program}; + my $versionOutput = `$program --version 2>/dev/null | head -n 1`; + + # If we can't run the script to get the version it likely won't work later. + next unless $versionOutput; + + # Use number.number for version (we don't need the excess in general). + ($versionOutput) = ($versionOutput =~ /(\d\.\d)/); + + # Use lt to do lexicographical comparison of strings (which should be + # equivalent and doesn't involve issues with floating point conversions). + if (not $versionOutput or $versionOutput lt $min_version) + { + next; + } + } + + # If no version suffix then use it in favor of a versioned autotool + # since the ever-popular WANT_AUTOFOO should then work (in theory). + return $file unless $version; + + # Emulate 'which', and abort if we've already seen this version. + next if exists $versions{$version}; + + # Save filename of program. + $versions{$version} = $file; + + # Use string comparison so that e.g. 253a will be > 253 but < 254. + if ($version gt $best_version_found) + { + $best_version_found = $version; + } + } + } + + return $versions{$best_version_found}; +} + +# Find an appropriate "which" program for later use by the shell script calling +# us. +sub findWhich +{ + for $candidate ('type -p', 'which', 'type') + { + $test = `$candidate sh 2>/dev/null`; + chomp $test; + + return $candidate if -x $test; + } +} + +# Uses which() to find a program unless the user provided its path in the +# environment (the upper case program name is searched). +sub findProgram +{ + $suffix = ""; # For use if @_ has only one param. + my ($program, $suffix) = @_; + + return $ENV{uc $program} if $ENV{uc $program}; + return which("$program$suffix"); +} + +# SCRIPT STARTS. + +# Search in path. +@paths = split(/:/, $ENV{'PATH'}); + +# Make sure at least /usr/bin and /usr/local/bin are in this search. +unshift @paths, '/usr/local/bin' unless grep $_ eq '/usr/local/bin', @paths; +unshift @paths, '/usr/bin' unless grep $_ eq '/usr/bin', @paths; + +$autoconf = findBest('autoconf', @paths); +($autoconf_suffix) = $autoconf =~ /.*autoconf(.*)$/; + +# Find matching autoconf companions. +$autoheader = findProgram('autoheader', $autoconf_suffix); +$autom4te = findProgram('autom4te', $autoconf_suffix); + +# Get best automake, and look for unsermake to possibly override it. +$automake = findBest('automake', @paths); +$unsermake = ""; +# backward compatible: if $UNSERMAKE points to a path, use it +$unsermake = findProgram('unsermake') if (defined($ENV{'UNSERMAKE'}) and $ENV{'UNSERMAKE'} =~ /\//); +# new compatible: if it says 'yes', use the one from path +$unsermake = which('unsermake') if ($ENV{'UNSERMAKE'} ne 'no'); + +($automake_suffix) = $automake =~ /.*automake(.*)$/; + +# Use unsermake if we found it. +$automake = "$unsermake -c" if $unsermake; + +# Find matching automake companions. +$aclocal = findProgram('aclocal', $automake_suffix); + +$which = findWhich(); + +# Make sure we have all of the needed programs. +for $i (qw'autoconf autoheader autom4te automake aclocal') +{ + unless(${$i}) + { + print "# Unable to find $i!!\n"; + exit 1; + } +} + +# Print results in eval-able form. +print < []" + exit 2 + ;; +x--doxdatadir=* ) + DOXDATA=`echo $1 | sed -e 's+--doxdatadir=++'` + ;; +x--installdir=*) + PREFIX=`echo $1 | sed -e 's+--installdir=++'` + ;; +x--* ) + echo "Unknown option: $1" + exit 1 + ;; +* ) + top_srcdir="$1" + break + ;; +esac +shift +done + + +### Sanity check the mandatory "top srcdir" argument. +if test -z "$top_srcdir" ; then + echo "Usage: doxygen.sh " + exit 1 +fi +if test ! -d "$top_srcdir" ; then + echo "top_srcdir ($top_srcdir) is not a directory." + exit 1 +fi + +### Normalize top_srcdir so it is an absolute path. +if expr "x$top_srcdir" : "x/" > /dev/null ; then + # top_srcdir is absolute already + : +else + top_srcdir=`cd "$top_srcdir" 2> /dev/null && pwd` + if test ! -d "$top_srcdir" ; then + echo "top_srcdir ($top_srcdir) is not a directory." + exit 1 + fi +fi + + + +### Sanity check and guess QTDOCDIR. +if test -z "$QTDOCDIR" ; then + if test -z "$QTDIR" ; then + for i in /usr/X11R6/share/doc/qt/html + do + QTDOCDIR="$i" + test -d "$QTDOCDIR" && break + done + else + for i in share/doc/qt/html doc/html + do + QTDOCDIR="$QTDIR/$i" + test -d "$QTDOCDIR" && break + done + fi +fi +if test -z "$QTDOCDIR" || test ! -d "$QTDOCDIR" ; then + if test -z "$QTDOCDIR" ; then + echo "* QTDOCDIR could not be guessed." + else + echo "* QTDOCDIR does not name a directory." + fi + if test -z "$QTDOCTAG" ; then + echo "* QTDOCDIR set to \"\"" + QTDOCDIR="" + else + echo "* But I'll use $QTDOCDIR anyway because of QTDOCTAG." + fi +fi + +### Get the "top srcdir", also its name, and handle the case that subdir "." +### is given (which would be top_srcdir then, so it's equal to none-given +### but no recursion either). +### +# top_srcdir="$1" # Already set by options processing +module_name=`basename "$top_srcdir"` +subdir="$2" +if test "x." = "x$subdir" ; then + subdir="" + if test "x$recurse_given" = "xNO" ; then + recurse=0 + fi +fi +if test "x" != "x$subdir" ; then + # If no recurse option given explicitly, default to + # no recurse when processing subdirs given on the command-line. + if test "x$recurse_given" = "xNO" ; then + recurse=0 + fi +fi + +if test -z "$DOXDATA" || test ! -d "$DOXDATA" ; then + if test -n "$DOXDATA" ; then + echo "* \$DOXDATA is '$DOXDATA' which does not name a directory" + fi + DOXDATA="$top_srcdir/doc/common" +fi + +if test ! -d "$DOXDATA" ; then + echo "* \$DOXDATA does not name a directory ( or is unset ), tried \"$DOXDATA\"" + exit 1 +fi + +if test -n "$PREFIX" && test ! -d "$PREFIX" ; then + echo "* \$PREFIX does not name a directory, tried \"$PREFIX\"" + echo "* \$PREFIX is disabled." + PREFIX="" +fi + +### We need some values from top-level files, which +### are not preserved between invocations of this +### script, so factor it out for easy use. +create_doxyfile_in() +{ + eval `grep 'VERSION="' "$top_srcdir/admin/cvs.sh"` + echo "PROJECT_NUMBER = $VERSION" > Doxyfile.in + grep '^KDE_INIT_DOXYGEN' "$top_srcdir/configure.in.in" | \ + sed -e 's+[^[]*\[\([^]]*\)+PROJECT_NAME = "\1"+' \ + -e 's+].*++' >> Doxyfile.in +} + +apidoxdir="$module_name"-apidocs +test "x$use_modulename" = "x0" && apidoxdir="apidocs" + +### If we're making the top subdir, create the structure +### for the apidox and initialize it. Otherwise, just use the +### structure assumed to be there. +if test -z "$subdir" ; then + if test ! -d "$apidoxdir" ; then + mkdir "$apidoxdir" > /dev/null 2>&1 + fi + cd "$apidoxdir" > /dev/null 2>&1 || { + echo "Cannot create and cd into $apidoxdir" + exit 1 + } + + test -f "Doxyfile.in" || create_doxyfile_in + + # Copy in logos and the like + for i in "favicon.ico" "kde_gear_64.png" + do + cp "$DOXDATA/$i" . > /dev/null 2> /dev/null + done + for i in "$top_srcdir/doc/api/Dox-"*.png + do + T=`basename "$i" | sed -e 's+Dox-++'` + test -f "$i" && cp "$i" "./$T" > /dev/null 2> /dev/null + done + + top_builddir="." + srcdir="$1" + subdir="." +else + cd "$apidoxdir" > /dev/null 2>&1 || { + echo "Cannot cd into $apidoxdir -- maybe you need to" + echo "build the top-level dox first." + exit 1 + } + + if test "x1" = "x$recurse" ; then + # OK, so --recurse was requested + if test ! -f "subdirs.top" ; then + echo "* No subdirs.top available in the $apidoxdir." + echo "* The --recurse option will be ignored." + recurse=0 + fi + fi +fi + +### Read a single line (TODO: support \ continuations) from the Makefile.am. +### Used to extract variable assignments from it. +extract_line() +{ + file="$2" ; test -z "$file" && file="$srcdir/Makefile.am" + pattern=`echo "$1" | tr + .` + grep "^$1" "$file" | \ + sed -e "s+$pattern.*=\s*++" +} + +### Handle the COMPILE_{FIRST,LAST,BEFORE,AFTER} part of Makefile.am +### in the toplevel. Copied from admin/cvs.sh. Licence presumed LGPL). +create_subdirs() +{ +echo "* Sorting top-level subdirs" +dirs= +idirs= +if test -f "$top_srcdir/inst-apps"; then + idirs=`cat "$top_srcdir/"inst-apps` +else + idirs=`cd "$top_srcdir" && ls -1 | sort` +fi + +compilefirst="" +compilelast="" +if test -f "$top_srcdir/"Makefile.am.in ; then + compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1` + compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1` +fi +for i in $idirs; do + if test -f "$top_srcdir/$i"/Makefile.am; then + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + fi +done + +: > ./_SUBDIRS + +for d in $compilefirst; do + echo $d >> ./_SUBDIRS +done + +(for d in $dirs; do + list="" + if test -f "$top_srcdir/"Makefile.am.in ; then + list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1` + fi + for s in $list; do + echo $s $d + done + list="" + if test -f "$top_srcdir/"Makefile.am.in ; then + list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1` + fi + for s in $list; do + echo $d $s + done + echo $d $d +done ) | tsort >> ./_SUBDIRS + +for d in $compilelast; do + echo $d >> ./_SUBDIRS +done + +test -r _SUBDIRS && mv _SUBDIRS subdirs.top || true +} + + +### Add HTML header, footer, CSS tags to Doxyfile. +### Assumes $subdir is set. Argument is a string +### to stick in front of the file if needed. +apidox_htmlfiles() +{ + dox_header="$top_srcdir/doc/api/$1header.html" + dox_footer="$top_srcdir/doc/api/$1footer.html" + dox_css="$top_srcdir/doc/api/doxygen.css" + test -f "$dox_header" || dox_header="$DOXDATA/$1header.html" + test -f "$dox_footer" || dox_footer="$DOXDATA/$1footer.html" + test -f "$dox_css" || dox_css="$DOXDATA/doxygen.css" + + echo "HTML_HEADER = $dox_header" >> "$subdir/Doxyfile" ; \ + echo "HTML_FOOTER = $dox_footer" >> "$subdir/Doxyfile" ; \ + echo "HTML_STYLESHEET = $dox_css" >> "$subdir/Doxyfile" +} + +apidox_specials() +{ + line=`extract_line DOXYGEN_PROJECTNAME "$1"` + test -n "$line" && echo "PROJECT_NAME = \"$line\"" >> "$2" +} + +apidox_local() +{ + for i in "$top_srcdir/doc/api/Doxyfile.local" + do + if test -f "$i" ; then + cat "$i" >> "$subdir/Doxyfile" + break + fi + done +} + +### Post-process HTML files by substituting in the menu files +# +# In non-top directories, both and +# are calculated and replaced. Top directories get an empty +# if any. +doxyndex() +{ + # Special case top-level to have an empty MENU. + if test "x$subdir" = "x." ; then + MENU="" + htmldir="." + htmltop="$top_builddir" # Just ., presumably + echo "* Post-processing top-level files" + else + MENU="
    " + htmldir="$subdir/html" + htmltop="$top_builddir.." # top_builddir ends with / + echo "* Post-processing files in $htmldir" + + # Build a little PHP file that maps class names to file + # names, for the quick-class-picker functionality. + # (The quick-class-picker is disabled due to styling + # problems in IE & FF). + ( + echo ",g" -e "s+_00+,+g" -e "s+_3+<+g" | tr "[A-Z]" "[a-z]"` + echo " \"$classname\" => \"$htmlfile\"," + done | sort ; \ + echo ") ?>" + ) > "$subdir/classmap.inc" + + # This is a list of pairs, with / separators so we can use + # basename and dirname (a crude shell hack) to split them + # into parts. For each, if the file part exists (as a html + # file) tack it onto the MENU variable as a
  • with link. + for i in "Main Page/index" \ + "Modules/modules" \ + "Namespace List/namespaces" \ + "Class Hierarchy/hierarchy" \ + "Alphabetical List/classes" \ + "Class List/annotated" \ + "File List/files" \ + "Directories/dirs" \ + "Namespace Members/namespacemembers" \ + "Class Members/functions" \ + "Related Pages/pages" + do + NAME=`dirname "$i"` + FILE=`basename "$i"` + test -f "$htmldir/$FILE.html" && MENU="$MENU
  • $NAME
    • " + done + + MENU="$MENU
" + fi + + + # Get the list of global Menu entries. + GMENU=`cat subdirs | tr -d '\n'` + + PMENU=`grep '++' | awk '{ c=split($0,a,"/"); for (j=1; j<=c; j++) { printf " / %s\n" , a[j]; } }' | tr -d '\n'` + + # Map the PHP file into HTML options so that + # it can be substituted in for the quick-class-picker. + CMENU="" + # For now, leave the CMENU disabled + CMENUBEGIN="" + + if test "x$subdir" = "x." ; then + # Disable CMENU on toplevel anyway + CMENUBEGIN="" + else + test -f "$subdir/classmap.inc" && \ + CMENU=`grep '=>' "$subdir/classmap.inc" | sed -e 's+"\([^"]*\)" => "'"$subdir/html/"'\([^"]*\)"+