diff --git a/CMakeLists.txt b/CMakeLists.txt new file mode 100644 index 0000000..80bf654 --- /dev/null +++ b/CMakeLists.txt @@ -0,0 +1,47 @@ +################################################################################ +# twin-style-mallory # +# ------------------ # +# This file is licensed under the terms of GNU GPL v3 or later. # +# Improvements and feedback are welcome. # +################################################################################ + +project(twin-style-mallory) + +### Includes ################################################################### +include(FindPkgConfig) +include(CheckFunctionExists) +include(CheckSymbolExists) +include(CheckIncludeFile) +include(CheckLibraryExists) +include(CheckCSourceCompiles) +include(CheckCXXSourceCompiles) + +include(TDEMacros) +include(TDESetupPaths) +include(TDEVersion) + +### Basic project setup ######################################################## +cmake_minimum_required(VERSION ${TDE_CMAKE_MINIMUM_VERSION}) +tde_set_project_version() +tde_setup_paths() + +### Options #################################################################### +option(WITH_ALL_OPTIONS "Enable all optional support" OFF) +option(WITH_GCC_VISIBILITY "Enable GCC visibility" ${WITH_ALL_OPTIONS}) + +### Components ################################################################# +option(BUILD_ALL "Build all" ON) +option(BUILD_COLORSCHEMES "Install colorschemes" ${BUILD_ALL}) +option(BUILD_TCC_MODULE "Build Control Centre module" ${BUILD_ALL}) +option(BUILD_TRANSLATIONS "Build translations" ${BUILD_ALL}) + +### Configuration ############################################################## +include(ConfigureChecks.cmake) +configure_file(config.h.cmake config.h @ONLY) + +### Subdirectories ############################################################# +add_subdirectory(malloryclient) +tde_conditional_add_subdirectory(BUILD_COLORSCHEMES colorscheme) +# tde_conditional_add_project_translations() + +# kate: indent-width 2; replace-tabs true; \ No newline at end of file diff --git a/ConfigureChecks.cmake b/ConfigureChecks.cmake new file mode 100644 index 0000000..2bc0c0c --- /dev/null +++ b/ConfigureChecks.cmake @@ -0,0 +1,21 @@ +################################################################################ +# twin-style-mallory # +# ------------------ # +# This file is licensed under the terms of GNU GPL v3 or later. # +# Improvements and feedback are welcome. # +################################################################################ + +### TQt/TDE #################################################################### +find_package(TQt) +find_package(TDE) +tde_setup_architecture_flags() +tde_setup_largefiles() + +### Big Endian ################################################################# +include(TestBigEndian) +test_big_endian(WORDS_BIGENDIAN) + +### GCC visibility ############################################################# +if (WITH_GCC_VISIBILITY) + tde_setup_gcc_visibility() +endif() \ No newline at end of file diff --git a/Makefile b/Makefile deleted file mode 100644 index 874f491..0000000 --- a/Makefile +++ /dev/null @@ -1,733 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# Generated automatically from Makefile.in by config.pl. -# KDE tags expanded automatically by am_edit - $Revision: 1.373 $ -# - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - -SHELL = /bin/sh - -srcdir = . -top_srcdir = . -VPATH = . -prefix = /opt/kde3 -exec_prefix = ${prefix} - -bindir = ${exec_prefix}/bin -sbindir = ${exec_prefix}/sbin -libexecdir = ${exec_prefix}/libexec -datadir = ${prefix}/share -sysconfdir = ${prefix}/etc -sharedstatedir = ${prefix}/com -localstatedir = ${prefix}/var -libdir = ${exec_prefix}/lib -infodir = ${prefix}/info -mandir = ${prefix}/man -includedir = ${prefix}/include -oldincludedir = /usr/include -pkgdatadir = $(datadir)/mallory -pkglibdir = $(libdir)/mallory -pkgincludedir = $(includedir)/mallory -top_builddir = . - -ACLOCAL = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6 -AUTOCONF = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf -AUTOMAKE = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6 -AUTOHEADER = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = /usr/bin/install -c -p -INSTALL_PROGRAM = ${INSTALL} $(INSTALL_STRIP_FLAG) -INSTALL_DATA = ${INSTALL} -m 644 -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = ${INSTALL} -INSTALL_HEADER = $(INSTALL_DATA) -transform = s,x,x, -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_alias = -build_triplet = i686-pc-linux-gnu -host_alias = -host_triplet = i686-pc-linux-gnu -target_alias = -target_triplet = i686-pc-linux-gnu - -EXEEXT = -OBJEXT = o -PATH_SEPARATOR = : -AMTAR = ${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar -ARTSCCONFIG = /opt/kde3/bin/artsc-config -AS = @AS@ -AUTODIRS = -AWK = gawk -BROCKENBORING = -CC = gcc -CONF_FILES = $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in -CPP = gcc -E -CXX = g++ -CXXCPP = g++ -E -DCOPIDL = /opt/kde3/bin/dcopidl -DCOPIDL2CPP = /opt/kde3/bin/dcopidl2cpp -DCOP_DEPENDENCIES = $(DCOPIDL) -DEPDIR = .deps -DLLTOOL = @DLLTOOL@ -DOXYGEN = @DOXYGEN@ -DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@ -DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@ -DPMSINC = @DPMSINC@ -DPMSLIB = @DPMSLIB@ -ECHO = echo -FRAMEWORK_COREAUDIO = -GCJ = @GCJ@ -GCJFLAGS = @GCJFLAGS@ -GLINC = @GLINC@ -GLLIB = @GLLIB@ -GMSGFMT = /usr/bin/msgfmt -IDL = @IDL@ -IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ -INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s -JAR = @JAR@ -JAVAC = @JAVAC@ -JAVAH = @JAVAH@ -JVMLIBS = @JVMLIBS@ -KDECONFIG = /opt/kde3/bin/tde-config -KDE_EXTRA_RPATH = -KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@ -KDE_HAVE_DOT = @KDE_HAVE_DOT@ -KDE_INCLUDES = -I/opt/kde3/include -KDE_LDFLAGS = -L/opt/kde3/lib -KDE_MT_LDFLAGS = -KDE_MT_LIBS = -lpthread -KDE_NO_UNDEFINED = -KDE_PLUGIN = -avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS) -KDE_RPATH = -R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries) -KDE_USE_CLOSURE_FALSE = # -KDE_USE_CLOSURE_TRUE = -KDE_USE_FINAL_FALSE = -KDE_USE_FINAL_TRUE = # -KDE_USE_NMCHECK_FALSE = -KDE_USE_NMCHECK_TRUE = # -KDE_XSL_STYLESHEET = /opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl -LEX = @LEX@ -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBBZ2 = @LIBBZ2@ -LIBCOMPAT = -LIBCRYPT = -lcrypt -LIBDL = -ldl -LIBGEN = @LIBGEN@ -LIBJPEG = -ljpeg -LIBMICO = @LIBMICO@ -LIBOBJS = -LIBPNG = -lpng -lz -lm -LIBPTHREAD = -lpthread -LIBPYTHON = @LIBPYTHON@ -LIBQIMGIO = @LIBQIMGIO@ -LIBRESOLV = -lresolv -LIBSHADOW = @LIBSHADOW@ -LIBSM = -lSM -lICE -LIBSOCKET = -LIBSSL = @LIBSSL@ -LIBTIFF = @LIBTIFF@ -LIBTOOL = $(SHELL) $(top_builddir)/libtool --silent -LIBUCB = -LIBUTIL = -lutil -LIBZ = -lz -LIB_JASPER = @LIB_JASPER@ -LIB_KAB = -lkab -LIB_KABC = -ltdeabc -LIB_TDECORE = -ltdecore -LIB_TDEPRINT = -ltdeprint -LIB_TDEUI = -ltdeui -LIB_KFILE = -ltdeio -LIB_KFM = -LIB_TDEHTML = -ltdehtml -LIB_KIMGIO = @LIB_KIMGIO@ -LIB_TDEIO = -ltdeio -LIB_TDEPARTS = -ltdeparts -LIB_TDESPELL = -ltdespell -LIB_TDESYCOCA = -ltdeio -LIB_POLL = -LIB_QPE = -LIB_QT = -ltqt-mt $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread -LIB_QTOPIA = @LIB_QTOPIA@ -LIB_SMB = -lsmb -LIB_X11 = -lX11 $(LIBSOCKET) -LIB_XEXT = -lXext -LN_S = ln -s -MCOPIDL = /opt/kde3/bin/mcopidl -MEINPROC = /opt/kde3/bin/meinproc -MICO_INCLUDES = @MICO_INCLUDES@ -MICO_LDFLAGS = @MICO_LDFLAGS@ -MOC = /usr/lib/qt3/bin/moc -MSGFMT = /usr/bin/msgfmt -NOOPT_CFLAGS = -O0 -NOOPT_CXXFLAGS = -O0 -OBJC = @OBJC@ -OBJCFLAGS = @OBJCFLAGS@ -OBJDUMP = @OBJDUMP@ -PACKAGE = mallory -PAMLIBS = @PAMLIBS@ -PASSWDLIBS = @PASSWDLIBS@ -PYTHONINC = @PYTHONINC@ -PYTHONLIB = @PYTHONLIB@ -PYTHONMODDIR = @PYTHONMODDIR@ -QTDOCDIR = @QTDOCDIR@ -QTE_NORTTI = -QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ -QT_INCLUDES = -I/usr/lib/qt3/include -QT_LDFLAGS = -L/usr/lib/qt3/lib -RANLIB = ranlib -RC = @RC@ -SETUIDFLAGS = @SETUIDFLAGS@ -SSL_INCLUDES = @SSL_INCLUDES@ -SSL_LDFLAGS = @SSL_LDFLAGS@ -STRIP = strip -TOPSUBDIRS = colorscheme malloryclient -UIC = /usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload -UIC_TR = tr2i18n -USER_INCLUDES = -USER_LDFLAGS = -USE_EXCEPTIONS = -fexceptions -USE_RTTI = -USE_THREADS = -VERSION = 1.0 -WOVERLOADED_VIRTUAL = -XGETTEXT = /usr/bin/xgettext -XPMINC = @XPMINC@ -XPMLIB = @XPMLIB@ -X_EXTRA_LIBS = -X_INCLUDES = -I/usr/X11R6/include -X_LDFLAGS = -L/usr/X11R6/lib -X_PRE_LIBS = -X_RPATH = -R $(x_libraries) -all_includes = -I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include -all_libraries = -L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib -am__include = include -am__quote = -idldir = @idldir@ -install_sh = /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh -jni_includes = @jni_includes@ -kde_appsdir = ${prefix}/share/applnk -kde_bindir = ${exec_prefix}/bin -kde_confdir = ${prefix}/share/config -kde_datadir = ${prefix}/share/apps -kde_htmldir = ${prefix}/share/doc/HTML -kde_icondir = ${prefix}/share/icons -kde_includes = /opt/kde3/include -kde_libraries = /opt/kde3/lib -kde_libs_htmldir = /opt/kde3/share/doc/HTML -kde_libs_prefix = /opt/kde3 -kde_locale = ${prefix}/share/locale -kde_mimedir = ${prefix}/share/mimelnk -kde_moduledir = ${libdir}/kde3 -kde_qtver = 3 -kde_servicesdir = ${prefix}/share/services -kde_servicetypesdir = ${prefix}/share/servicetypes -kde_sounddir = ${prefix}/share/sounds -kde_styledir = ${libdir}/kde3/plugins/styles -kde_templatesdir = ${prefix}/share/templates -kde_wallpaperdir = ${prefix}/share/wallpapers -kde_widgetdir = /opt/kde3/lib/kde3/plugins/designer -tdeinitdir = $(kde_moduledir) -micodir = @micodir@ -qt_includes = /usr/lib/qt3/include -qt_libraries = /usr/lib/qt3/lib -x_includes = /usr/X11R6/include -x_libraries = /usr/X11R6/lib -xdg_appsdir = ${datadir}/applications -xdg_directorydir = ${datadir}/desktop-directories -SUBDIRS = malloryclient colorscheme - -EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO - -# not a GNU package. You can remove this line, if -# have all needed files, that a GNU package needs -AUTOMAKE_OPTIONS = foreign dist-bzip2 - -MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = - -#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ -#>- uninstall-info-recursive all-recursive install-data-recursive \ -#>- install-exec-recursive installdirs-recursive install-recursive \ -#>- uninstall-recursive check-recursive installcheck-recursive -#>+ 4 -#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ -#>- uninstall-info-recursive all-recursive install-data-recursive \ -#>- install-exec-recursive installdirs-recursive install-recursive \ -#>- uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive -#>+ 4 -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive -DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ - Makefile.in TODO acinclude.m4 aclocal.m4 admin/compile \ - admin/config.guess admin/config.sub admin/depcomp \ - admin/install-sh admin/ltmain.sh admin/missing \ - admin/mkinstalldirs admin/ylwrap config.h.in configure \ - configure.in -DIST_SUBDIRS = $(SUBDIRS) -#>- all: config.h -#>+ 1 -all: docs-am config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: - -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -#>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --foreign Makefile -#>+ 3 - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile - cd $(top_srcdir) && perl admin/am_edit Makefile.in -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) - -$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) -#>- cd $(srcdir) && $(AUTOCONF) -#>+ 1 - cd $(srcdir) && rm -f configure && $(MAKE) -f admin/Makefile.common configure - -$(ACLOCAL_M4): configure.in acinclude.m4 - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h - -$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOHEADER) - touch $(srcdir)/config.h.in - -distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -#>+ 4 -KDE_DIST=stamp-h.in subdirs configure.files Makefile.dist configure.in.in - -DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) - - -top_distdir = . -distdir = $(PACKAGE)-$(VERSION) - -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } - -GZIP_ENV = --best -distcleancheck_listfiles = find . -type f -print - -distdir: $(DISTFILES) - $(am__remove_distdir) - mkdir $(distdir) - $(mkinstalldirs) $(distdir)/admin - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d $(distdir)/$$subdir \ - || mkdir $(distdir)/$$subdir \ - || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - $(am__remove_distdir) - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ - && cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - find $$dc_install_base -type f -print ; \ - exit 1; } >&2 ) \ - && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ - && rm -f $(distdir).tar.gz \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @echo "$(distdir).tar.gz is ready for distribution" | \ - sed 'h;s/./=/g;p;x;p;x' -distcleancheck: distclean - if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: - -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -#>- clean-am: clean-generic clean-libtool mostlyclean-am -#>+ 1 -clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) -distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-exec-am: - -install-info: install-info-recursive - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf autom4te.cache -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am - -uninstall-info: uninstall-info-recursive - -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libtool clean-recursive dist dist-all \ - dist-bzip2 dist-gzip distcheck distclean distclean-generic \ - distclean-hdr distclean-libtool distclean-recursive \ - distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \ - info info-am info-recursive install install-am install-data \ - install-data-am install-data-recursive install-exec \ - install-exec-am install-exec-recursive install-info \ - install-info-am install-info-recursive install-man \ - install-recursive install-strip installcheck installcheck-am \ - installdirs installdirs-am installdirs-recursive \ - maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ - uninstall uninstall-am uninstall-info-am \ - uninstall-info-recursive uninstall-recursive - - -$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; - -$(top_srcdir)/subdirs: - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs - -$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in - @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 - -package-messages: - $(MAKE) -f admin/Makefile.common package-messages - $(MAKE) -C po merge - -dist-hook: - cd $(top_distdir) && perl admin/am_edit -padmin - cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs -#_SOURCES = malloryclient.h malloryclient.cpp -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - - - - - - - - -#>+ 2 -docs-am: - -#>+ 6 -force-reedit: - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile - cd $(top_srcdir) && perl admin/am_edit Makefile.in - - -#>+ 20 -clean-bcheck: - rm -f *.bchecktest.cc *.bchecktest.cc.class - -bcheck: bcheck-recursive - -bcheck-am: - @for i in ; do \ - if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ - echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ - echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ - echo "$$i"; \ - if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy $$i.bchecktest.cc; then \ - rm -f $$i.bchecktest.cc; exit 1; \ - fi ; \ - echo "" >> $$i.bchecktest.cc.class; \ - perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ - fi ; \ - done - - -#>+ 2 -final: - $(MAKE) all-am -#>+ 2 -final-install: - $(MAKE) install-am -#>+ 2 -no-final: - $(MAKE) all-am -#>+ 2 -no-final-install: - $(MAKE) install-am -#>+ 3 -cvs-clean: - $(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo - -#>+ 3 -nmcheck: -nmcheck-am: nmcheck diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index 763d49e..0000000 --- a/Makefile.am +++ /dev/null @@ -1,27 +0,0 @@ -SUBDIRS = malloryclient colorscheme - -EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO - -# not a GNU package. You can remove this line, if -# have all needed files, that a GNU package needs -AUTOMAKE_OPTIONS = foreign dist-bzip2 - -$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; - -$(top_srcdir)/subdirs: - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs - -$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in - @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 - -MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files - -package-messages: - $(MAKE) -f admin/Makefile.common package-messages - $(MAKE) -C po merge - -dist-hook: - cd $(top_distdir) && perl admin/am_edit -padmin - cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs -#_SOURCES = malloryclient.h malloryclient.cpp \ No newline at end of file diff --git a/Makefile.dist b/Makefile.dist deleted file mode 100644 index e12528e..0000000 --- a/Makefile.dist +++ /dev/null @@ -1,14 +0,0 @@ - -all: - @echo "This Makefile is only for the CVS repository" - @echo "" - @if test ! -d admin; then \ - echo "Please recheckout this module!" ;\ - echo "for cvs: use checkout once and after that update again" ;\ - echo "for cvsup: checkout kde-common from cvsup and" ;\ - echo " link kde-common/admin to ./admin" ;\ - exit 1 ;\ - fi - $(MAKE) -f admin/Makefile.common cvs - -.SILENT: diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 29f1644..0000000 --- a/Makefile.in +++ /dev/null @@ -1,732 +0,0 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. -# KDE tags expanded automatically by am_edit - $Revision: 1.373 $ -# @configure_input@ - -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_alias = @build_alias@ -build_triplet = @build@ -host_alias = @host_alias@ -host_triplet = @host@ -target_alias = @target_alias@ -target_triplet = @target@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -AMTAR = @AMTAR@ -ARTSCCONFIG = @ARTSCCONFIG@ -AS = @AS@ -AUTODIRS = @AUTODIRS@ -AWK = @AWK@ -BROCKENBORING = @BROCKENBORING@ -CC = @CC@ -CONF_FILES = @CONF_FILES@ -CPP = @CPP@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -DCOPIDL = @DCOPIDL@ -DCOPIDL2CPP = @DCOPIDL2CPP@ -DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DOXYGEN = @DOXYGEN@ -DOXYGEN_PROJECT_NAME = @DOXYGEN_PROJECT_NAME@ -DOXYGEN_PROJECT_NUMBER = @DOXYGEN_PROJECT_NUMBER@ -DPMSINC = @DPMSINC@ -DPMSLIB = @DPMSLIB@ -ECHO = @ECHO@ -FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ -GCJ = @GCJ@ -GCJFLAGS = @GCJFLAGS@ -GLINC = @GLINC@ -GLLIB = @GLLIB@ -GMSGFMT = @GMSGFMT@ -IDL = @IDL@ -IDL_DEPENDENCIES = @IDL_DEPENDENCIES@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -JAR = @JAR@ -JAVAC = @JAVAC@ -JAVAH = @JAVAH@ -JVMLIBS = @JVMLIBS@ -KDECONFIG = @KDECONFIG@ -KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ -KDE_HAS_DOXYGEN = @KDE_HAS_DOXYGEN@ -KDE_HAVE_DOT = @KDE_HAVE_DOT@ -KDE_INCLUDES = @KDE_INCLUDES@ -KDE_LDFLAGS = @KDE_LDFLAGS@ -KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ -KDE_MT_LIBS = @KDE_MT_LIBS@ -KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ -KDE_PLUGIN = @KDE_PLUGIN@ -KDE_RPATH = @KDE_RPATH@ -KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ -KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ -KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ -KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ -KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ -KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ -KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ -LEX = @LEX@ -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBBZ2 = @LIBBZ2@ -LIBCOMPAT = @LIBCOMPAT@ -LIBCRYPT = @LIBCRYPT@ -LIBDL = @LIBDL@ -LIBGEN = @LIBGEN@ -LIBJPEG = @LIBJPEG@ -LIBMICO = @LIBMICO@ -LIBOBJS = @LIBOBJS@ -LIBPNG = @LIBPNG@ -LIBPTHREAD = @LIBPTHREAD@ -LIBPYTHON = @LIBPYTHON@ -LIBQIMGIO = @LIBQIMGIO@ -LIBRESOLV = @LIBRESOLV@ -LIBSHADOW = @LIBSHADOW@ -LIBSM = @LIBSM@ -LIBSOCKET = @LIBSOCKET@ -LIBSSL = @LIBSSL@ -LIBTIFF = @LIBTIFF@ -LIBTOOL = @LIBTOOL@ -LIBUCB = @LIBUCB@ -LIBUTIL = @LIBUTIL@ -LIBZ = @LIBZ@ -LIB_JASPER = @LIB_JASPER@ -LIB_KAB = @LIB_KAB@ -LIB_KABC = @LIB_KABC@ -LIB_TDECORE = @LIB_TDECORE@ -LIB_TDEPRINT = @LIB_TDEPRINT@ -LIB_TDEUI = @LIB_TDEUI@ -LIB_KFILE = @LIB_KFILE@ -LIB_KFM = @LIB_KFM@ -LIB_TDEHTML = @LIB_TDEHTML@ -LIB_KIMGIO = @LIB_KIMGIO@ -LIB_TDEIO = @LIB_TDEIO@ -LIB_TDEPARTS = @LIB_TDEPARTS@ -LIB_TDESPELL = @LIB_TDESPELL@ -LIB_TDESYCOCA = @LIB_TDESYCOCA@ -LIB_POLL = @LIB_POLL@ -LIB_QPE = @LIB_QPE@ -LIB_QT = @LIB_QT@ -LIB_QTOPIA = @LIB_QTOPIA@ -LIB_SMB = @LIB_SMB@ -LIB_X11 = @LIB_X11@ -LIB_XEXT = @LIB_XEXT@ -LN_S = @LN_S@ -MCOPIDL = @MCOPIDL@ -MEINPROC = @MEINPROC@ -MICO_INCLUDES = @MICO_INCLUDES@ -MICO_LDFLAGS = @MICO_LDFLAGS@ -MOC = @MOC@ -MSGFMT = @MSGFMT@ -NOOPT_CFLAGS = @NOOPT_CFLAGS@ -NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ -OBJC = @OBJC@ -OBJCFLAGS = @OBJCFLAGS@ -OBJDUMP = @OBJDUMP@ -PACKAGE = @PACKAGE@ -PAMLIBS = @PAMLIBS@ -PASSWDLIBS = @PASSWDLIBS@ -PYTHONINC = @PYTHONINC@ -PYTHONLIB = @PYTHONLIB@ -PYTHONMODDIR = @PYTHONMODDIR@ -QTDOCDIR = @QTDOCDIR@ -QTE_NORTTI = @QTE_NORTTI@ -QTOPIA_INCLUDES = @QTOPIA_INCLUDES@ -QT_INCLUDES = @QT_INCLUDES@ -QT_LDFLAGS = @QT_LDFLAGS@ -RANLIB = @RANLIB@ -RC = @RC@ -SETUIDFLAGS = @SETUIDFLAGS@ -SSL_INCLUDES = @SSL_INCLUDES@ -SSL_LDFLAGS = @SSL_LDFLAGS@ -STRIP = @STRIP@ -TOPSUBDIRS = @TOPSUBDIRS@ -UIC = @UIC@ -UIC_TR = @UIC_TR@ -USER_INCLUDES = @USER_INCLUDES@ -USER_LDFLAGS = @USER_LDFLAGS@ -USE_EXCEPTIONS = @USE_EXCEPTIONS@ -USE_RTTI = @USE_RTTI@ -USE_THREADS = @USE_THREADS@ -VERSION = @VERSION@ -WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ -XGETTEXT = @XGETTEXT@ -XPMINC = @XPMINC@ -XPMLIB = @XPMLIB@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_INCLUDES = @X_INCLUDES@ -X_LDFLAGS = @X_LDFLAGS@ -X_PRE_LIBS = @X_PRE_LIBS@ -X_RPATH = @X_RPATH@ -all_includes = @all_includes@ -all_libraries = @all_libraries@ -am__include = @am__include@ -am__quote = @am__quote@ -idldir = @idldir@ -install_sh = @install_sh@ -jni_includes = @jni_includes@ -kde_appsdir = @kde_appsdir@ -kde_bindir = @kde_bindir@ -kde_confdir = @kde_confdir@ -kde_datadir = @kde_datadir@ -kde_htmldir = @kde_htmldir@ -kde_icondir = @kde_icondir@ -kde_includes = @kde_includes@ -kde_libraries = @kde_libraries@ -kde_libs_htmldir = @kde_libs_htmldir@ -kde_libs_prefix = @kde_libs_prefix@ -kde_locale = @kde_locale@ -kde_mimedir = @kde_mimedir@ -kde_moduledir = @kde_moduledir@ -kde_qtver = @kde_qtver@ -kde_servicesdir = @kde_servicesdir@ -kde_servicetypesdir = @kde_servicetypesdir@ -kde_sounddir = @kde_sounddir@ -kde_styledir = @kde_styledir@ -kde_templatesdir = @kde_templatesdir@ -kde_wallpaperdir = @kde_wallpaperdir@ -kde_widgetdir = @kde_widgetdir@ -tdeinitdir = @tdeinitdir@ -micodir = @micodir@ -qt_includes = @qt_includes@ -qt_libraries = @qt_libraries@ -x_includes = @x_includes@ -x_libraries = @x_libraries@ -xdg_appsdir = @xdg_appsdir@ -xdg_directorydir = @xdg_directorydir@ -SUBDIRS = malloryclient colorscheme - -EXTRA_DIST = admin AUTHORS COPYING ChangeLog INSTALL README TODO - -# not a GNU package. You can remove this line, if -# have all needed files, that a GNU package needs -AUTOMAKE_OPTIONS = foreign dist-bzip2 - -MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -DIST_SOURCES = - -#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ -#>- uninstall-info-recursive all-recursive install-data-recursive \ -#>- install-exec-recursive installdirs-recursive install-recursive \ -#>- uninstall-recursive check-recursive installcheck-recursive -#>+ 4 -#>- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ -#>- uninstall-info-recursive all-recursive install-data-recursive \ -#>- install-exec-recursive installdirs-recursive install-recursive \ -#>- uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive -#>+ 4 -RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \ - uninstall-info-recursive all-recursive install-data-recursive \ - install-exec-recursive installdirs-recursive install-recursive \ - uninstall-recursive check-recursive installcheck-recursive nmcheck-recursive bcheck-recursive -DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ - Makefile.in TODO acinclude.m4 aclocal.m4 admin/compile \ - admin/config.guess admin/config.sub admin/depcomp \ - admin/install-sh admin/ltmain.sh admin/missing \ - admin/mkinstalldirs admin/ylwrap config.h.in configure \ - configure.in -DIST_SUBDIRS = $(SUBDIRS) -#>- all: config.h -#>+ 1 -all: docs-am config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: - -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno -$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) -#>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --foreign Makefile -#>+ 3 - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile - cd $(top_srcdir) && perl admin/am_edit Makefile.in -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) - -$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck -$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) -#>- cd $(srcdir) && $(AUTOCONF) -#>+ 1 - cd $(srcdir) && rm -f configure && $(MAKE) -f admin/Makefile.common configure - -$(ACLOCAL_M4): configure.in acinclude.m4 - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h - -$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOHEADER) - touch $(srcdir)/config.h.in - -distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done - -ETAGS = etags -ETAGSFLAGS = - -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$tags$$unique" \ - || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH -#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -#>+ 4 -KDE_DIST=stamp-h.in subdirs configure.files Makefile.dist configure.in.in - -DISTFILES= $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) - - -top_distdir = . -distdir = $(PACKAGE)-$(VERSION) - -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } - -GZIP_ENV = --best -distcleancheck_listfiles = find . -type f -print - -distdir: $(DISTFILES) - $(am__remove_distdir) - mkdir $(distdir) - $(mkinstalldirs) $(distdir)/admin - @list='$(DISTFILES)'; for file in $$list; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkinstalldirs) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d $(distdir)/$$subdir \ - || mkdir $(distdir)/$$subdir \ - || exit 1; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" \ - distdir=../$(distdir)/$$subdir \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="${top_distdir}" distdir="$(distdir)" \ - dist-hook - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - $(am__remove_distdir) - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ - && cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - find $$dc_install_base -type f -print ; \ - exit 1; } >&2 ) \ - && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ - && rm -f $(distdir).tar.gz \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @echo "$(distdir).tar.gz is ready for distribution" | \ - sed 'h;s/./=/g;p;x;p;x' -distcleancheck: distclean - if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: - -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -#>- clean-am: clean-generic clean-libtool mostlyclean-am -#>+ 1 -clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) -distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-exec-am: - -install-info: install-info-recursive - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf autom4te.cache -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -uninstall-am: uninstall-info-am - -uninstall-info: uninstall-info-recursive - -.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \ - clean-generic clean-libtool clean-recursive dist dist-all \ - dist-bzip2 dist-gzip distcheck distclean distclean-generic \ - distclean-hdr distclean-libtool distclean-recursive \ - distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \ - info info-am info-recursive install install-am install-data \ - install-data-am install-data-recursive install-exec \ - install-exec-am install-exec-recursive install-info \ - install-info-am install-info-recursive install-man \ - install-recursive install-strip installcheck installcheck-am \ - installdirs installdirs-am installdirs-recursive \ - maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-libtool mostlyclean-recursive tags tags-recursive \ - uninstall uninstall-am uninstall-info-am \ - uninstall-info-recursive uninstall-recursive - - -$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; - -$(top_srcdir)/subdirs: - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs - -$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in - @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 - -package-messages: - $(MAKE) -f admin/Makefile.common package-messages - $(MAKE) -C po merge - -dist-hook: - cd $(top_distdir) && perl admin/am_edit -padmin - cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs -#_SOURCES = malloryclient.h malloryclient.cpp -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - - - - - - - - -#>+ 2 -docs-am: - -#>+ 6 -force-reedit: - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile - cd $(top_srcdir) && perl admin/am_edit Makefile.in - - -#>+ 20 -clean-bcheck: - rm -f *.bchecktest.cc *.bchecktest.cc.class - -bcheck: bcheck-recursive - -bcheck-am: - @for i in ; do \ - if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ - echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ - echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ - echo "$$i"; \ - if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy $$i.bchecktest.cc; then \ - rm -f $$i.bchecktest.cc; exit 1; \ - fi ; \ - echo "" >> $$i.bchecktest.cc.class; \ - perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ - fi ; \ - done - - -#>+ 2 -final: - $(MAKE) all-am -#>+ 2 -final-install: - $(MAKE) install-am -#>+ 2 -no-final: - $(MAKE) all-am -#>+ 2 -no-final-install: - $(MAKE) install-am -#>+ 3 -cvs-clean: - $(MAKE) admindir=$(top_srcdir)/admin -f $(top_srcdir)/admin/Makefile.common cvs-clean - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo - -#>+ 3 -nmcheck: -nmcheck-am: nmcheck diff --git a/acinclude.m4 b/acinclude.m4 deleted file mode 100644 index 947048e..0000000 --- a/acinclude.m4 +++ /dev/null @@ -1,10870 +0,0 @@ -## -*- autoconf -*- - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for tdelibs -dnl and tdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN(KDE_PATH_X_DIRECT, -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK(, [${x_direct_test_function}()], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \ - /usr/X11/lib${tdelibsuff} \ - /usr/X11R6/lib${tdelibsuff} \ - /usr/X11R5/lib${tdelibsuff} \ - /usr/X11R4/lib${tdelibsuff} \ - \ - /usr/lib${tdelibsuff}/X11 \ - /usr/lib${tdelibsuff}/X11R6 \ - /usr/lib${tdelibsuff}/X11R5 \ - /usr/lib${tdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${tdelibsuff} \ - /usr/local/X11R6/lib${tdelibsuff} \ - /usr/local/X11R5/lib${tdelibsuff} \ - /usr/local/X11R4/lib${tdelibsuff} \ - \ - /usr/local/lib${tdelibsuff}/X11 \ - /usr/local/lib${tdelibsuff}/X11R6 \ - /usr/local/lib${tdelibsuff}/X11R5 \ - /usr/local/lib${tdelibsuff}/X11R4 \ - \ - /usr/X386/lib${tdelibsuff} \ - /usr/x386/lib${tdelibsuff} \ - /usr/XFree86/lib${tdelibsuff}/X11 \ - \ - /usr/lib${tdelibsuff} \ - /usr/local/lib${tdelibsuff} \ - /usr/unsupported/lib${tdelibsuff} \ - /usr/athena/lib${tdelibsuff} \ - /usr/local/x11r5/lib${tdelibsuff} \ - /usr/lpp/Xamples/lib${tdelibsuff} \ - /lib/usr/lib${tdelibsuff}/X11 \ - \ - /usr/openwin/lib${tdelibsuff} \ - /usr/openwin/share/lib${tdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_FIND_FILE, -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, -dnl if-not-found, test-parameter) -AC_DEFUN(KDE_FIND_PATH, -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - dirs="$3" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN(KDE_MOC_ERROR_MESSAGE, -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN(KDE_UIC_ERROR_MESSAGE, -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN(KDE_CHECK_UIC_FLAG, -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $QTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_PATH_QT_MOC_UIC, -[ - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - elif test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - UIC=$UIC_PATH - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN(KDE_1_CHECK_PATHS, -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN(KDE_SET_PATHS, -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN(KDE_SET_DEFAULT_PATHS, -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${prefix}/share/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${prefix}/share/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${prefix}/share/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${prefix}/share/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${prefix}/share/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${prefix}/share/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${prefix}/share/config' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${prefix}/share/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${prefix}/share/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${prefix}/share/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${prefix}/share/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${prefix}/share/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${prefix}/share/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS, -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "xdg_directorydir" - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN(KDE_MISSING_PROG_ERROR, -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN(KDE_MISSING_ARTS_ERROR, -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly. -]) -]) - -AC_DEFUN(KDE_SUBST_PROGRAMS, -[ - AC_ARG_WITH(arts, - [ --without-arts build without aRts [default=detect] ], - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no") - - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs" - if test -n "$TDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $TDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" != "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs]) - KDE_FIND_PATH(brockenboring, BROCKENBORING, [$kde_default_bindirs]) - if test -n "$BROCKENBORING"; then - KDE_FIND_PATH(tdeinit_wrapper, BROCKENBORING, [$kde_default_bindirs]) - fi - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(KDECONFIG) - AC_SUBST(BROCKENBORING) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - - if test -x "$KDECONFIG"; then # it can be "compiled" - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - else - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - fi - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) -])dnl - -AC_DEFUN(AC_CREATE_KFSSTND, -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN(AC_SUBST_KFSSTND, -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(tdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN(KDE_MISC_TESTS, -[ - AC_LANG_C - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_LANG_C - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # darwin needs this to initialize the environment - AC_CHECK_HEADERS(crt_externs.h) - AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-framework CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(K_PATH_X, -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - [ --enable-embedded link to Qt-embedded, don't use X], - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -if test "$kde_use_qt_emb" = "no"; then - -AC_MSG_CHECKING(for X) -AC_LANG_SAVE -AC_LANG_C -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${tdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS" - -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_libraries) -AC_SUBST(x_includes) - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -AC_SUBST(LIBSM) -LDFLAGS="$ac_save_LDFLAGS" - -AC_SUBST(X_PRE_LIBS) - -LIB_X11='-lX11 $(LIBSOCKET)' -AC_SUBST(LIB_X11) - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no - ) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe - ]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -else - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" - AC_SUBST(X_PRE_LIBS) - AC_SUBST(LIB_X11) - AC_SUBST(LIBSM) - AC_SUBST(X_INCLUDES) - AC_SUBST(X_LDFLAGS) - AC_SUBST(x_includes) - AC_SUBST(x_libraries) -fi -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - - -AC_LANG_RESTORE - -]) - -AC_DEFUN(KDE_PRINT_QT_PROGRAM, -[ -AC_REQUIRE([KDE_USE_QT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) -dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_PATH_QT_1_3, -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_QT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - [ --disable-mt link to non-threaded Qt (deprecated)], - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-tqt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -if test -z "$LIBQT"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" - else - qtlib="qt" - fi - - kde_int_qt="-l$qtlib" -else - kde_int_qt="$LIBQT" - kde_lib_qt_set=yes -fi - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-tqt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - if test -z "$LIBQT"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - else - LIBQT="$qtlib-mt" - kde_int_qt="$qtlib-mt" - fi - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBQT="$LIBQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" -AC_ARG_WITH(qt-dir, - [ --with-qt-dir=DIR where the root of Qt is installed ], - [ ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${tdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - [ --with-qt-includes=DIR where the Qt includes are. ], - [ - ac_qt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - [ --with-qt-libraries=DIR where the Qt library is installed.], - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=ntqstyle.h -else - kde_qt_header=ntqglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes"; then -KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(qt_includes) - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$all_libraries $QT_LDFLAGS" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(QT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_QT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" - -AC_SUBST(LIB_QT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN(AC_PATH_QT, -[ -AC_PATH_QT_1_3 -]) - -AC_DEFUN(KDE_CHECK_UIC_PLUGINS, -[ -AC_REQUIRE([AC_PATH_QT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([you need to install tdelibs first.]) -fi -fi -]) - -AC_DEFUN(KDE_CHECK_FINAL, -[ - AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN(KDE_CHECK_CLOSURE, -[ - AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation], - kde_use_closure=$enableval, kde_use_closure=yes) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -AC_DEFUN(KDE_CHECK_NMCHECK, -[ - AC_ARG_ENABLE(nmcheck, [ --enable-nmcheck enable automatic namespace cleanness check], - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_BASE_PATH_KDE, -[ -AC_PREREQ([2.13]) -AC_REQUIRE([AC_PATH_QT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${prefix}/include - ac_kde_includes=$prefix/include - - if test "${exec_prefix}" != NONE; then - kde_libraries=${libdir} - ac_kde_libraries=$libdir - if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then - ac_kde_libraries=$exec_prefix/lib${tdelibsuff} - fi - else - kde_libraries=${prefix}/lib${tdelibsuff} - ac_kde_libraries=$prefix/lib${tdelibsuff} - fi -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libtdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libtdeio.la" -fi - -if test -z "$1"; then - -kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}" -test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by tdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1 - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes=${ac_kde_prefix}/include - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$all_libraries $KDE_LDFLAGS" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN(KDE_CHECK_EXTRA_LIBS, -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR - adds non standard include paths], - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN(KDE_1_CHECK_PATH_HEADERS, -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_KDEQTADDON, -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdeqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdeqtaddon=yes, - kde_cv_have_kdeqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdeqtaddon) - -if test "$kde_cv_have_kdeqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN(KDE_CHECK_KIMGIO, -[ - AC_REQUIRE([AC_BASE_PATH_KDE]) - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - AC_REQUIRE([AC_FIND_TIFF]) - AC_REQUIRE([AC_FIND_JPEG]) - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JASPER]) - AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) - - if test "$1" = "existance"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" - AC_CHECK_LIB(kimgio, kimgioRegister, [ - LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) - LIBS="$kde_save_LIBS" - AC_LANG_RESTORE - else - LIBKIMGIO_EXISTS=yes - fi - - if test "$LIBKIMGIO_EXISTS" = "yes"; then - LIB_KIMGIO='-lkimgio' - else - LIB_KIMGIO='' - fi - AC_SUBST(LIB_KIMGIO) -]) - -AC_DEFUN(KDE_CREATE_LIBS_ALIASES, -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-ltdeabc") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -# these are for backward compatibility - AC_SUBST(LIB_TDESYCOCA, "-ltdeio") - AC_SUBST(LIB_KFILE, "-ltdeio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-ltdefile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -else - AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)") - AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)") - AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)") -fi -]) - -AC_DEFUN(AC_PATH_KDE, -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN(KDE_CHECK_FUNC_EXT, -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libtdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" -#endif -$4; -#endif -]) -]) - -AC_DEFUN(AC_CHECK_SETENV, -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN(AC_CHECK_UNSETENV, -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN(AC_CHECK_GETDOMAINNAME, -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN(AC_CHECK_GETHOSTNAME, -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN(AC_CHECK_USLEEP, -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN(AC_CHECK_RANDOM, -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN(AC_CHECK_INITGROUPS, -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN(AC_CHECK_MKSTEMPS, -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN(AC_CHECK_MKDTEMP, -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN(AC_CHECK_RES_INIT, -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - AC_MSG_CHECKING([if res_init is available]) - AC_TRY_COMPILE( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) -]) - -AC_DEFUN(AC_CHECK_STRLCPY, -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN(AC_CHECK_STRLCAT, -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN(AC_FIND_GIF, - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the tdesupport package) -fi -]) - -AC_DEFUN(KDE_FIND_JPEG_HELPER, -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -AC_LANG_C -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[/* Override any gcc2 internal prototype to avoid an error. */ -struct jpeg_decompress_struct; -typedef struct jpeg_decompress_struct * j_decompress_ptr; -typedef int size_t; -#ifdef __cplusplus -extern "C" { -#endif - void jpeg_CreateDecompress(j_decompress_ptr cinfo, - int version, size_t structsize); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [jpeg_CreateDecompress(0L, 0, 0);], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN(AC_FIND_JPEG, -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in tdehtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN(KDE_CHECK_QT_JPEG, -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN(AC_FIND_ZLIB, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -AC_LANG_C -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN(KDE_TRY_TIFFLIB, -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN(AC_FIND_TIFF, -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - - -AC_DEFUN(AC_FIND_PNG, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_LANG_C -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN(AC_FIND_JASPER, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_LANG_C -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN(AC_CHECK_BOOL, -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN(AC_CHECK_GNU_EXTENSIONS, -[ -AC_MSG_CHECKING(if you need GNU extensions) -AC_CACHE_VAL(ac_cv_gnu_extensions, -[ -cat > conftest.c << EOF -#include - -#ifdef __GNU_LIBRARY__ -yes -#endif -EOF - -if (eval "$ac_cpp conftest.c") 2>&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_gnu_extensions=yes -else - ac_cv_gnu_extensions=no -fi -]) - -AC_MSG_RESULT($ac_cv_gnu_extensions) -if test "$ac_cv_gnu_extensions" = "yes"; then - AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) -fi -]) - -AC_DEFUN(KDE_CHECK_COMPILER_FLAG, -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN(AC_REMOVE_FORBIDDEN, -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN(AC_VALIDIFY_CXXFLAGS, -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN(AC_CHECK_COMPILERS, -[ - AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) - - AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,[ --disable-warnings disables compilation with -Wall and similiar], - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 $CFLAGS" - else - CFLAGS="-g -O2 $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 $CXXFLAGS" - else - CXXFLAGS="-g -O2 $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - case $host in - *-*-linux-gnu) - CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - if test "$GXX" = "yes"; then - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - fi - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], - [ - kde_use_pch=$enableval - ],[kde_use_pch=no]) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN(KDE_ADD_DEPENDENCIES, -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN(KDE_PROG_LIBTOOL, -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_LANG_SAVE -AC_LANG_C -AC_OBJEXT -AC_EXEEXT -AC_LANG_RESTORE - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -AC_ARG_ENABLE(objprelink, [ --enable-objprelink prelink apps using objprelink (obsolete)], - kde_use_objprelink=$enableval, kde_use_objprelink=no) - if test "x$kde_use_objprelink" = "xyes"; then - AC_MSG_WARN([ ------------------------------------------------------------- -Configuration option --enable-objprelink is no longer useful. -See http:://objprelink.sourceforge.net for details: -1- Recent binutils are fast enough to do without objprelink. -2- Newer versions of objprelink do not need this option. ------------------------------------------------------------- -]) - fi -]) - -AC_DEFUN(KDE_CHECK_LIB64, -[ - tdelibsuff=none - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none[=default])]), - tdelibsuff=$enableval) - # TODO: add an auto case that compiles a little C app to check - # where the glibc is - if test "$tdelibsuff" = "none"; then - tdelibsuff= - fi - if test -z "$tdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${tdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $tdelibsuff]) - fi -]) - -AC_DEFUN(KDE_CHECK_TYPES, -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -AC_DEFUN(KDE_DO_IT_ALL, -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN(AC_CHECK_RPATH, -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - [ --disable-rpath do not use the rpath feature of ld], - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(kde_libraries)" - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN(AC_CHECK_SOCKLEN_T, [ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(ac_cv_socklen_t, [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ -#include -#include - ],[ -socklen_t a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=socklen_t, - AC_TRY_COMPILE([ -#include -#include - ],[ -int a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=int, - ac_cv_socklen_t=size_t - ) - ) - AC_LANG_RESTORE - ]) - - AC_MSG_RESULT($ac_cv_socklen_t) - if test "$ac_cv_socklen_t" != "socklen_t"; then - AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, - [Define the real type of socklen_t]) - fi - AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) - -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN(AM_KDE_WITH_NLS, - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE, -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN(AM_LC_MESSAGES, - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN(AM_KDE_GNU_GETTEXT, - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN(AC_HAVE_XPM, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - AC_LANG_C - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN(AC_HAVE_DPMS, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - AC_LANG_C - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - LIBS="$LIBS -lXdpms" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN(AC_HAVE_GL, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags="$LDFLAGS" - ac_save_cxxflags="$CXXFLAGS" - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" - test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="mesa", ac_cv_have_gl="no") - if test "x$ac_cv_have_gl" = "xno"; then - LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL" - test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$ac_save_cflags $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - fi - AC_LANG_RESTORE - LDFLAGS="$ac_save_ldflags" - CXXFLAGS="$ac_save_cxxflags" - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)' - else - GLLIB='-lGLU -lGL $(LIB_X11)' - fi - else - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN(KDE_PAM, [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - AC_ARG_WITH(pam, - [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], - [ if test "x$withval" = "xyes"; then - use_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - use_pam=no - else - use_pam=yes - pam_service=$withval - fi - ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" - ], [ - AC_CACHE_VAL(ac_cv_path_pam, - [ use_pam=no - AC_CHECK_LIB(pam, pam_start, - [ AC_CHECK_HEADER(security/pam_appl.h, - [ use_pam=yes - pam_service=kde ]) - ], , $LIBDL) - ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" - ]) - ]) - eval "$ac_cv_path_pam" - - AC_MSG_CHECKING(for PAM) - if test "x$use_pam" = xno; then - AC_MSG_RESULT(no) - PAMLIBS="" - else - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], security/pam_appl.h, - [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN(DEF_PAM_SERVICE, [ - AC_ARG_WITH($1-pam, - [ --with-$1-pam=[val] override PAM service from --with-pam for $2], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$withval" - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN(KDE_SHADOWPASSWD, [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - [ --with-shadow If you want shadow password support ], - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN(KDE_PASSWDLIBS, [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN(KDE_CHECK_LIBDL, -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN(KDE_CHECK_DLOPEN, -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -[ --disable-dlopen link statically [default=no]] , -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING, -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN(KDE_ADD_INCLUDES, -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - - -AC_DEFUN(KDE_CHECK_MICO, -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_MISC_TESTS]) -AC_MSG_CHECKING(for MICO) - -if test -z "$MICODIR"; then - kde_micodir=/usr/local - else - kde_micodir="$MICODIR" -fi - -AC_ARG_WITH(micodir, - [ --with-micodir=micodir where mico is installed ], - kde_micodir=$withval, - kde_micodir=$kde_micodir -) - -AC_CACHE_VAL(kde_cv_mico_incdir, -[ - mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" -AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) - -]) -kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` - -if test ! -r $kde_micodir/include/CORBA.h; then - AC_MSG_ERROR([No CORBA.h found, specify another micodir]) -fi - -AC_MSG_RESULT($kde_micodir) - -MICO_INCLUDES=-I$kde_micodir/include -AC_SUBST(MICO_INCLUDES) -MICO_LDFLAGS=-L$kde_micodir/lib -AC_SUBST(MICO_LDFLAGS) -micodir=$kde_micodir -AC_SUBST(micodir) - -AC_MSG_CHECKING([for MICO version]) -AC_CACHE_VAL(kde_cv_mico_version, -[ -AC_LANG_C -cat >conftest.$ac_ext < -#include -int main() { - - printf("MICO_VERSION=%s\n",MICO_VERSION); - return (0); -} -EOF -ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' -if AC_TRY_EVAL(ac_compile); then - if eval `./conftest 2>&5`; then - kde_cv_mico_version=$MICO_VERSION - else - AC_MSG_ERROR([your system is not able to execute a small application to - find MICO version! Check $kde_micodir/include/mico/version.h]) - fi -else - AC_MSG_ERROR([your system is not able to compile a small application to - find MICO version! Check $kde_micodir/include/mico/version.h]) -fi -]) - -dnl installed MICO version -mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` -mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` -mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` - -if test "x$1" = "x"; then - req_version="2.3.0" -else - req_version=$1 -fi - -dnl required MICO version -req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` -req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` -req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` - -if test "$mico_v_maj" -lt "$req_v_maj" || \ - ( test "$mico_v_maj" -eq "$req_v_maj" && \ - test "$mico_v_mid" -lt "$req_v_mid" ) || \ - ( test "$mico_v_mid" -eq "$req_v_mid" && \ - test "$mico_v_min" -lt "$req_v_min" ) - -then - AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ -at least is required. You should upgrade MICO.]) -else - AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) -fi - -LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" -AC_SUBST(LIBMICO) -if test -z "$IDL"; then - IDL='$(kde_bindir)/cuteidl' -fi -AC_SUBST(IDL) -IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' -AC_SUBST(IDL_DEPENDENCIES) - -idldir="\$(includedir)/idl" -AC_SUBST(idldir) - -]) - -AC_DEFUN(KDE_CHECK_MINI_STL, -[ -AC_REQUIRE([KDE_CHECK_MICO]) - -AC_MSG_CHECKING(if we use mico's mini-STL) -AC_CACHE_VAL(kde_cv_have_mini_stl, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_cxxflags="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" -AC_TRY_COMPILE( -[ -#include -], -[ -#ifdef HAVE_MINI_STL -#error "nothing" -#endif -], -kde_cv_have_mini_stl=no, -kde_cv_have_mini_stl=yes) -CXXFLAGS="$kde_save_cxxflags" -AC_LANG_RESTORE -]) - -if test "x$kde_cv_have_mini_stl" = "xyes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -]) - - -AC_DEFUN(KDE_CHECK_LIBPTHREAD, -[ -AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) -AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN(KDE_CHECK_PTHREAD_OPTION, -[ - AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.], - kde_use_kernthreads=$enableval, kde_use_kernthreads=no) - - if test "$kde_use_kernthreads" = "yes"; then - ac_save_CXXFLAGS="$CXXFLAGS" - ac_save_CFLAGS="$CFLAGS" - CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" - CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" - AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h) - CXXFLAGS="$ac_save_CXXFLAGS" - CFLAGS="$ac_save_CFLAGS" - if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then - kde_use_kernthreads=no - else - dnl Add proper -I and -l statements - AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD - if test "x$LIBPTHREAD" = "x"; then - kde_use_kernthreads=no - else - USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" - fi - fi - else - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] ) - fi - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN(KDE_CHECK_THREADING, -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN(KDE_TRY_LINK_PYTHON, -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -AC_LANG_SAVE -AC_LANG_C -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi -AC_LANG_RESTORE - -fi - -]) - -AC_DEFUN(KDE_CHECK_PYTHON_DIR, -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -[ --with-pythondir=pythondir use python installed in pythondir ], -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN(KDE_CHECK_PYTHON_INTERN, -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" -AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN(KDE_CHECK_PYTHON, -[ - KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) -]) - -AC_DEFUN(KDE_CHECK_STL_SGI, -[ - AC_MSG_CHECKING([if STL implementation is SGI like]) - AC_CACHE_VAL(kde_cv_stl_type_sgi, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_type_sgi=yes, - kde_cv_stl_type_sgi=no) -]) - - AC_MSG_RESULT($kde_cv_stl_type_sgi) - - if test "$kde_cv_stl_type_sgi" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - fi -]) - -AC_DEFUN(KDE_CHECK_STL_HP, -[ - AC_MSG_CHECKING([if STL implementation is HP like]) - AC_CACHE_VAL(kde_cv_stl_type_hp, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hello World"; - astring.remove(0, 6); // now astring is "World" - return 0; -], kde_cv_stl_type_hp=yes, - kde_cv_stl_type_hp=no) -]) - AC_MSG_RESULT($kde_cv_stl_type_hp) - - if test "$kde_cv_stl_type_hp" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP]) - fi -]) - -AC_DEFUN(KDE_CHECK_STL, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - KDE_CHECK_STL_SGI - - if test "$kde_cv_stl_type_sgi" = "no"; then - KDE_CHECK_STL_HP - - if test "$kde_cv_stl_type_hp" = "no"; then - AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?") - fi - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN(AC_FIND_QIMGIO, - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN(KDE_CHECK_ANSI, -[ -]) - -AC_DEFUN(KDE_CHECK_INSURE, -[ - AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], - [ - if test $enableval = "no"; dnl - then ac_use_insure="no" - else ac_use_insure="yes" - fi - ], [ac_use_insure="no"]) - - AC_MSG_CHECKING(if we will use Insure++ to debug) - AC_MSG_RESULT($ac_use_insure) - if test "$ac_use_insure" = "yes"; dnl - then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? - fi -]) - -AC_DEFUN(AM_DISABLE_LIBRARIES, -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN(AC_CHECK_UTMP_FILE, -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN(KDE_CREATE_SUBDIRSLIST, -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - TOPSUBDIRS="" - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -else - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN(KDE_CHECK_NAMESPACES, -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_NEWLIBS, -[ - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_CHECK_S_ISSOCK, -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_LANG_SAVE -AC_LANG_C -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -AC_LANG_RESTORE -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_CHECK_KDEMAXPATHLEN, -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -AC_LANG_C -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN(KDE_CHECK_HEADER, -[ - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER($1, $2, $3, $4) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_HEADERS, -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_FAST_CONFIGURE, -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN(KDE_CONF_FILES, -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -AC_DEFUN(KDE_SET_PREFIX, -[ - unset CDPATH - dnl make $TDEDIR the default for the installation - AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superflous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN(KDE_LANG_CPLUSPLUS, -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -KDE_LANG_CPLUSPLUS -]) - -AC_DEFUN(KDE_CHECK_LONG_LONG, -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN(KDE_CHECK_LIB, -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN(KDE_JAVA_PREFIX, -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN(KDE_CHECK_JAVA_DIR, -[ - -AC_ARG_WITH(java, -[ --with-java=javadir use java installed in javadir, --without-java disables ], -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> look in $PATH - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - javadirs="$javadirs $dir" - done - IFS=$kde_save_IFS - jredirs= - - for dir in $javadirs; do - if test ! -d $dir; then break; fi - if test -x "$dir/java"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - done - - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - - else - JAVAC= - jni_includes= - fi - - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -else # no - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN(KDE_NEED_FLEX, -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN(AC_PATH_QTOPIA, -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_QT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_QTOPIA="-lqpe" - AC_SUBST(LIB_QTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_QTOPIA $LIBQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN(KDE_INIT_DOXYGEN, -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) -AC_MSG_RESULT($QTDOCDIR) - -AC_SUBST(QTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN(AC_FIND_BZIP2, -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_C -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(KDE_CHECK_SSL, -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - [ --with-ssl-dir=DIR where the root of OpenSSL is installed], - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$tdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - [ --without-ssl disable SSL checks], - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - AC_LANG_SAVE - AC_LANG_C - - ac_cflags_safe="$CFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CFLAGS="$CFLAGS -I$ssl_incdir $all_includes" - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - CFLAGS="$ac_cflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - AC_LANG_SAVE - AC_LANG_C - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_compile='${CC-gcc} $CFLAGS -I$ac_ssl_includes conftest.$ac_ext -o conftest' - if AC_TRY_EVAL(ac_compile); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 1.0.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - AC_LANG_RESTORE - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 1.0.6]) - fi -fi - -if test "$ssl_includes" = "/usr/include" || test "$ssl_includes" = "/usr/local/include" || test -z "$ssl_includes"; then - SSL_INCLUDES=""; -else - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN(KDE_CHECK_STRLCPY, -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN(KDE_CHECK_BINUTILS, -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001 -## Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 47 AC_PROG_LIBTOOL - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([LT_AC_PROG_SED])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" -])# _LT_AC_SYS_COMPILER - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-linux*) - # Test if the compiler is 64bit - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *"ELF 32"*) - LINUX_64_MODE="32" - ;; - *"ELF 64"*) - LINUX_64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $3" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - testring="ABCD" - - case $host_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring=$testring$testring - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - ifelse([$1],[],[save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"], - [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"], - [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS" - GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - # Append any errors to the config.log. - cat out/conftest.err 1>&AS_MESSAGE_LOG_FD - else - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - ifelse([$1],[],[CFLAGS="$save_CFLAGS"], - [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"], - [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"]) - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"` - if echo "$sys_lib_search_path_spec" | [egrep ';[C-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - if test "$host_cpu" = ia64; then - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - else - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - fi - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags=TAGS], - [include additional configurations @<:@CXX,GCJ@:>@])], - [tagnames="$withval"], - [tagnames="CXX,GCJ" - case $host_os in - mingw*|cygwin*) tagnames="$tagnames,RC" ;; - esac]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - AC_LIBTOOL_LANG_CXX_CONFIG - ;; - - GCJ) - AC_LIBTOOL_LANG_GCJ_CONFIG - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - available_tags="$available_tags $tagname" - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -#- set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -])# AC_PROG_LD - - -# AC_PROG_LD_GNU -# -------------- -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -])# AC_PROG_LD_GNU - - -# AC_PROG_LD_RELOAD_FLAG -# ---------------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], - lt_cv_ld_reload_flag, - [lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -])# AC_PROG_LD_RELOAD_FLAG - - -# AC_DEPLIBS_CHECK_METHOD -# ----------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependant libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - if test "$host_cpu" = ia64; then - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - else - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - fi - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; - -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# If this macro is not defined by Autoconf, define it here. -ifdef([AC_PROVIDE_IFELSE], - [], - [define([AC_PROVIDE_IFELSE], - [ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) -])# _LT_AC_LANG_CXX - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# -------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([AC_PROG_RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='main(){return(0);}' - -_LT_AC_SYS_COMPILER - -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' - ;; - esac -fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_DLOPEN_SELF($1) - -# Report which librarie types wil actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= - -# Source file extension for C test sources. -ac_ext=cc - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int char *[]) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${CXX-"c++"} -set dummy $CC -compiler="[$]2" -_LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ - egrep 'GNU ld' > /dev/null; then - with_gnu_ld=yes - - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - egrep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux*) - if test $with_gnu_ld = no; then - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - else - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - fi - fi - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - else - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - fi - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc) - # Intel C++ - with_gnu_ld=yes - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - cxx) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - # NetBSD uses g++ - do we need to do anything? - ;; - osf3*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | egrep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -# Figure out "hidden" C++ library dependencies from verbose -# compiler output whening linking a shared library. -cat > conftest.$ac_ext <> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "$cfgfile" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments - _LT_AC_FILE_LTDLL_C - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments - _LT_AC_FILE_IMPGEN_C -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - cygwin* | mingw* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - fi - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - fi - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux*) - if test "$CC" = "icc"; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - fi - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - if test "x$host_vendor" = xsni; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD' - else - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - fi - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC" - ;; -esac -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - cygwin* | mingw* | pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an egrep regular expression of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left by newer dlltools. - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - ;; - esac - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi4*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - esac - - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9* | hpux10* | hpux11*) - if test "$GCC" = yes; then - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - esac - else - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - ;; - esac - fi - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - else - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - fi - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - if test "x$host_vendor" = xsni; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac -fi -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_FILE_IMPGEN_C -# -------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [ -# /* impgen.c starts here */ -# /* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break; - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 10000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" -]) -AC_MSG_RESULT([$SED]) -]) diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 695df37..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,11703 +0,0 @@ -# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*- - -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for tdelibs -dnl and tdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN(KDE_PATH_X_DIRECT, -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK(, [${x_direct_test_function}()], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \ - /usr/X11/lib${tdelibsuff} \ - /usr/X11R6/lib${tdelibsuff} \ - /usr/X11R5/lib${tdelibsuff} \ - /usr/X11R4/lib${tdelibsuff} \ - \ - /usr/lib${tdelibsuff}/X11 \ - /usr/lib${tdelibsuff}/X11R6 \ - /usr/lib${tdelibsuff}/X11R5 \ - /usr/lib${tdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${tdelibsuff} \ - /usr/local/X11R6/lib${tdelibsuff} \ - /usr/local/X11R5/lib${tdelibsuff} \ - /usr/local/X11R4/lib${tdelibsuff} \ - \ - /usr/local/lib${tdelibsuff}/X11 \ - /usr/local/lib${tdelibsuff}/X11R6 \ - /usr/local/lib${tdelibsuff}/X11R5 \ - /usr/local/lib${tdelibsuff}/X11R4 \ - \ - /usr/X386/lib${tdelibsuff} \ - /usr/x386/lib${tdelibsuff} \ - /usr/XFree86/lib${tdelibsuff}/X11 \ - \ - /usr/lib${tdelibsuff} \ - /usr/local/lib${tdelibsuff} \ - /usr/unsupported/lib${tdelibsuff} \ - /usr/athena/lib${tdelibsuff} \ - /usr/local/x11r5/lib${tdelibsuff} \ - /usr/lpp/Xamples/lib${tdelibsuff} \ - /lib/usr/lib${tdelibsuff}/X11 \ - \ - /usr/openwin/lib${tdelibsuff} \ - /usr/openwin/share/lib${tdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_FIND_FILE, -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, -dnl if-not-found, test-parameter) -AC_DEFUN(KDE_FIND_PATH, -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - dirs="$3" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN(KDE_MOC_ERROR_MESSAGE, -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN(KDE_UIC_ERROR_MESSAGE, -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN(KDE_CHECK_UIC_FLAG, -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $QTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_PATH_QT_MOC_UIC, -[ - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - elif test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - UIC=$UIC_PATH - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN(KDE_1_CHECK_PATHS, -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN(KDE_SET_PATHS, -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN(KDE_SET_DEFAULT_PATHS, -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${prefix}/share/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${prefix}/share/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${prefix}/share/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${prefix}/share/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${prefix}/share/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${prefix}/share/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${prefix}/share/config' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${prefix}/share/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${prefix}/share/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${prefix}/share/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${prefix}/share/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${prefix}/share/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${prefix}/share/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS, -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "xdg_directorydir" - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN(KDE_MISSING_PROG_ERROR, -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN(KDE_MISSING_ARTS_ERROR, -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly. -]) -]) - -AC_DEFUN(KDE_SUBST_PROGRAMS, -[ - AC_ARG_WITH(arts, - [ --without-arts build without aRts [default=detect] ], - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no") - - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs" - if test -n "$TDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $TDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" != "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs]) - KDE_FIND_PATH(brockenboring, BROCKENBORING, [$kde_default_bindirs]) - if test -n "$BROCKENBORING"; then - KDE_FIND_PATH(tdeinit_wrapper, BROCKENBORING, [$kde_default_bindirs]) - fi - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(KDECONFIG) - AC_SUBST(BROCKENBORING) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - - if test -x "$KDECONFIG"; then # it can be "compiled" - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - else - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - fi - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) -])dnl - -AC_DEFUN(AC_CREATE_KFSSTND, -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN(AC_SUBST_KFSSTND, -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(tdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN(KDE_MISC_TESTS, -[ - AC_LANG_C - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_LANG_C - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # darwin needs this to initialize the environment - AC_CHECK_HEADERS(crt_externs.h) - AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-framework CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(K_PATH_X, -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - [ --enable-embedded link to Qt-embedded, don't use X], - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -if test "$kde_use_qt_emb" = "no"; then - -AC_MSG_CHECKING(for X) -AC_LANG_SAVE -AC_LANG_C -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${tdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS" - -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_libraries) -AC_SUBST(x_includes) - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -AC_SUBST(LIBSM) -LDFLAGS="$ac_save_LDFLAGS" - -AC_SUBST(X_PRE_LIBS) - -LIB_X11='-lX11 $(LIBSOCKET)' -AC_SUBST(LIB_X11) - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no - ) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe - ]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -else - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" - AC_SUBST(X_PRE_LIBS) - AC_SUBST(LIB_X11) - AC_SUBST(LIBSM) - AC_SUBST(X_INCLUDES) - AC_SUBST(X_LDFLAGS) - AC_SUBST(x_includes) - AC_SUBST(x_libraries) -fi -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - - -AC_LANG_RESTORE - -]) - -AC_DEFUN(KDE_PRINT_QT_PROGRAM, -[ -AC_REQUIRE([KDE_USE_QT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) -dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_PATH_QT_1_3, -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_QT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - [ --disable-mt link to non-threaded Qt (deprecated)], - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-tqt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -if test -z "$LIBQT"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" - else - qtlib="qt" - fi - - kde_int_qt="-l$qtlib" -else - kde_int_qt="$LIBQT" - kde_lib_qt_set=yes -fi - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-tqt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - if test -z "$LIBQT"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - else - LIBQT="$qtlib-mt" - kde_int_qt="$qtlib-mt" - fi - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBQT="$LIBQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" -AC_ARG_WITH(qt-dir, - [ --with-qt-dir=DIR where the root of Qt is installed ], - [ ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${tdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - [ --with-qt-includes=DIR where the Qt includes are. ], - [ - ac_qt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - [ --with-qt-libraries=DIR where the Qt library is installed.], - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=ntqstyle.h -else - kde_qt_header=ntqglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes"; then -KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(qt_includes) - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$all_libraries $QT_LDFLAGS" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(QT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_QT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" - -AC_SUBST(LIB_QT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN(AC_PATH_QT, -[ -AC_PATH_QT_1_3 -]) - -AC_DEFUN(KDE_CHECK_UIC_PLUGINS, -[ -AC_REQUIRE([AC_PATH_QT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([you need to install tdelibs first.]) -fi -fi -]) - -AC_DEFUN(KDE_CHECK_FINAL, -[ - AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN(KDE_CHECK_CLOSURE, -[ - AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation], - kde_use_closure=$enableval, kde_use_closure=yes) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -AC_DEFUN(KDE_CHECK_NMCHECK, -[ - AC_ARG_ENABLE(nmcheck, [ --enable-nmcheck enable automatic namespace cleanness check], - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_BASE_PATH_KDE, -[ -AC_PREREQ([2.13]) -AC_REQUIRE([AC_PATH_QT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${prefix}/include - ac_kde_includes=$prefix/include - - if test "${exec_prefix}" != NONE; then - kde_libraries=${libdir} - ac_kde_libraries=$libdir - if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then - ac_kde_libraries=$exec_prefix/lib${tdelibsuff} - fi - else - kde_libraries=${prefix}/lib${tdelibsuff} - ac_kde_libraries=$prefix/lib${tdelibsuff} - fi -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libtdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libtdeio.la" -fi - -if test -z "$1"; then - -kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}" -test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by tdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1 - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes=${ac_kde_prefix}/include - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$all_libraries $KDE_LDFLAGS" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN(KDE_CHECK_EXTRA_LIBS, -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR - adds non standard include paths], - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN(KDE_1_CHECK_PATH_HEADERS, -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_KDEQTADDON, -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdeqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdeqtaddon=yes, - kde_cv_have_kdeqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdeqtaddon) - -if test "$kde_cv_have_kdeqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN(KDE_CHECK_KIMGIO, -[ - AC_REQUIRE([AC_BASE_PATH_KDE]) - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - AC_REQUIRE([AC_FIND_TIFF]) - AC_REQUIRE([AC_FIND_JPEG]) - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JASPER]) - AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) - - if test "$1" = "existance"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" - AC_CHECK_LIB(kimgio, kimgioRegister, [ - LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) - LIBS="$kde_save_LIBS" - AC_LANG_RESTORE - else - LIBKIMGIO_EXISTS=yes - fi - - if test "$LIBKIMGIO_EXISTS" = "yes"; then - LIB_KIMGIO='-lkimgio' - else - LIB_KIMGIO='' - fi - AC_SUBST(LIB_KIMGIO) -]) - -AC_DEFUN(KDE_CREATE_LIBS_ALIASES, -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-ltdeabc") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -# these are for backward compatibility - AC_SUBST(LIB_TDESYCOCA, "-ltdeio") - AC_SUBST(LIB_KFILE, "-ltdeio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-ltdefile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -else - AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)") - AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)") - AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)") -fi -]) - -AC_DEFUN(AC_PATH_KDE, -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN(KDE_CHECK_FUNC_EXT, -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libtdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" -#endif -$4; -#endif -]) -]) - -AC_DEFUN(AC_CHECK_SETENV, -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN(AC_CHECK_UNSETENV, -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN(AC_CHECK_GETDOMAINNAME, -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN(AC_CHECK_GETHOSTNAME, -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN(AC_CHECK_USLEEP, -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN(AC_CHECK_RANDOM, -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN(AC_CHECK_INITGROUPS, -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN(AC_CHECK_MKSTEMPS, -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN(AC_CHECK_MKDTEMP, -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN(AC_CHECK_RES_INIT, -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - AC_MSG_CHECKING([if res_init is available]) - AC_TRY_COMPILE( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) -]) - -AC_DEFUN(AC_CHECK_STRLCPY, -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN(AC_CHECK_STRLCAT, -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN(AC_FIND_GIF, - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the tdesupport package) -fi -]) - -AC_DEFUN(KDE_FIND_JPEG_HELPER, -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -AC_LANG_C -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[/* Override any gcc2 internal prototype to avoid an error. */ -struct jpeg_decompress_struct; -typedef struct jpeg_decompress_struct * j_decompress_ptr; -typedef int size_t; -#ifdef __cplusplus -extern "C" { -#endif - void jpeg_CreateDecompress(j_decompress_ptr cinfo, - int version, size_t structsize); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [jpeg_CreateDecompress(0L, 0, 0);], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN(AC_FIND_JPEG, -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in tdehtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN(KDE_CHECK_QT_JPEG, -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN(AC_FIND_ZLIB, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -AC_LANG_C -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN(KDE_TRY_TIFFLIB, -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN(AC_FIND_TIFF, -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - - -AC_DEFUN(AC_FIND_PNG, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_LANG_C -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN(AC_FIND_JASPER, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_LANG_C -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN(AC_CHECK_BOOL, -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN(AC_CHECK_GNU_EXTENSIONS, -[ -AC_MSG_CHECKING(if you need GNU extensions) -AC_CACHE_VAL(ac_cv_gnu_extensions, -[ -cat > conftest.c << EOF -#include - -#ifdef __GNU_LIBRARY__ -yes -#endif -EOF - -if (eval "$ac_cpp conftest.c") 2>&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_gnu_extensions=yes -else - ac_cv_gnu_extensions=no -fi -]) - -AC_MSG_RESULT($ac_cv_gnu_extensions) -if test "$ac_cv_gnu_extensions" = "yes"; then - AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) -fi -]) - -AC_DEFUN(KDE_CHECK_COMPILER_FLAG, -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN(AC_REMOVE_FORBIDDEN, -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN(AC_VALIDIFY_CXXFLAGS, -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN(AC_CHECK_COMPILERS, -[ - AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) - - AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,[ --disable-warnings disables compilation with -Wall and similiar], - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 $CFLAGS" - else - CFLAGS="-g -O2 $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 $CXXFLAGS" - else - CXXFLAGS="-g -O2 $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - case $host in - *-*-linux-gnu) - CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - if test "$GXX" = "yes"; then - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - fi - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], - [ - kde_use_pch=$enableval - ],[kde_use_pch=no]) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN(KDE_ADD_DEPENDENCIES, -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN(KDE_PROG_LIBTOOL, -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_LANG_SAVE -AC_LANG_C -AC_OBJEXT -AC_EXEEXT -AC_LANG_RESTORE - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -AC_ARG_ENABLE(objprelink, [ --enable-objprelink prelink apps using objprelink (obsolete)], - kde_use_objprelink=$enableval, kde_use_objprelink=no) - if test "x$kde_use_objprelink" = "xyes"; then - AC_MSG_WARN([ ------------------------------------------------------------- -Configuration option --enable-objprelink is no longer useful. -See http:://objprelink.sourceforge.net for details: -1- Recent binutils are fast enough to do without objprelink. -2- Newer versions of objprelink do not need this option. ------------------------------------------------------------- -]) - fi -]) - -AC_DEFUN(KDE_CHECK_LIB64, -[ - tdelibsuff=none - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none[=default])]), - tdelibsuff=$enableval) - # TODO: add an auto case that compiles a little C app to check - # where the glibc is - if test "$tdelibsuff" = "none"; then - tdelibsuff= - fi - if test -z "$tdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${tdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $tdelibsuff]) - fi -]) - -AC_DEFUN(KDE_CHECK_TYPES, -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -AC_DEFUN(KDE_DO_IT_ALL, -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN(AC_CHECK_RPATH, -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - [ --disable-rpath do not use the rpath feature of ld], - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(kde_libraries)" - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN(AC_CHECK_SOCKLEN_T, [ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(ac_cv_socklen_t, [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ -#include -#include - ],[ -socklen_t a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=socklen_t, - AC_TRY_COMPILE([ -#include -#include - ],[ -int a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=int, - ac_cv_socklen_t=size_t - ) - ) - AC_LANG_RESTORE - ]) - - AC_MSG_RESULT($ac_cv_socklen_t) - if test "$ac_cv_socklen_t" != "socklen_t"; then - AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, - [Define the real type of socklen_t]) - fi - AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) - -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN(AM_KDE_WITH_NLS, - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE, -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN(AM_LC_MESSAGES, - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN(AM_KDE_GNU_GETTEXT, - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN(AC_HAVE_XPM, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - AC_LANG_C - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN(AC_HAVE_DPMS, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - AC_LANG_C - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - LIBS="$LIBS -lXdpms" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN(AC_HAVE_GL, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags="$LDFLAGS" - ac_save_cxxflags="$CXXFLAGS" - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" - test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="mesa", ac_cv_have_gl="no") - if test "x$ac_cv_have_gl" = "xno"; then - LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL" - test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$ac_save_cflags $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - fi - AC_LANG_RESTORE - LDFLAGS="$ac_save_ldflags" - CXXFLAGS="$ac_save_cxxflags" - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)' - else - GLLIB='-lGLU -lGL $(LIB_X11)' - fi - else - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN(KDE_PAM, [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - AC_ARG_WITH(pam, - [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], - [ if test "x$withval" = "xyes"; then - use_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - use_pam=no - else - use_pam=yes - pam_service=$withval - fi - ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" - ], [ - AC_CACHE_VAL(ac_cv_path_pam, - [ use_pam=no - AC_CHECK_LIB(pam, pam_start, - [ AC_CHECK_HEADER(security/pam_appl.h, - [ use_pam=yes - pam_service=kde ]) - ], , $LIBDL) - ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" - ]) - ]) - eval "$ac_cv_path_pam" - - AC_MSG_CHECKING(for PAM) - if test "x$use_pam" = xno; then - AC_MSG_RESULT(no) - PAMLIBS="" - else - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], security/pam_appl.h, - [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN(DEF_PAM_SERVICE, [ - AC_ARG_WITH($1-pam, - [ --with-$1-pam=[val] override PAM service from --with-pam for $2], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$withval" - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN(KDE_SHADOWPASSWD, [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - [ --with-shadow If you want shadow password support ], - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN(KDE_PASSWDLIBS, [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN(KDE_CHECK_LIBDL, -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN(KDE_CHECK_DLOPEN, -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -[ --disable-dlopen link statically [default=no]] , -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING, -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN(KDE_ADD_INCLUDES, -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - - -AC_DEFUN(KDE_CHECK_MICO, -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_MISC_TESTS]) -AC_MSG_CHECKING(for MICO) - -if test -z "$MICODIR"; then - kde_micodir=/usr/local - else - kde_micodir="$MICODIR" -fi - -AC_ARG_WITH(micodir, - [ --with-micodir=micodir where mico is installed ], - kde_micodir=$withval, - kde_micodir=$kde_micodir -) - -AC_CACHE_VAL(kde_cv_mico_incdir, -[ - mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" -AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) - -]) -kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` - -if test ! -r $kde_micodir/include/CORBA.h; then - AC_MSG_ERROR([No CORBA.h found, specify another micodir]) -fi - -AC_MSG_RESULT($kde_micodir) - -MICO_INCLUDES=-I$kde_micodir/include -AC_SUBST(MICO_INCLUDES) -MICO_LDFLAGS=-L$kde_micodir/lib -AC_SUBST(MICO_LDFLAGS) -micodir=$kde_micodir -AC_SUBST(micodir) - -AC_MSG_CHECKING([for MICO version]) -AC_CACHE_VAL(kde_cv_mico_version, -[ -AC_LANG_C -cat >conftest.$ac_ext < -#include -int main() { - - printf("MICO_VERSION=%s\n",MICO_VERSION); - return (0); -} -EOF -ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' -if AC_TRY_EVAL(ac_compile); then - if eval `./conftest 2>&5`; then - kde_cv_mico_version=$MICO_VERSION - else - AC_MSG_ERROR([your system is not able to execute a small application to - find MICO version! Check $kde_micodir/include/mico/version.h]) - fi -else - AC_MSG_ERROR([your system is not able to compile a small application to - find MICO version! Check $kde_micodir/include/mico/version.h]) -fi -]) - -dnl installed MICO version -mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` -mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` -mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` - -if test "x$1" = "x"; then - req_version="2.3.0" -else - req_version=$1 -fi - -dnl required MICO version -req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` -req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` -req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` - -if test "$mico_v_maj" -lt "$req_v_maj" || \ - ( test "$mico_v_maj" -eq "$req_v_maj" && \ - test "$mico_v_mid" -lt "$req_v_mid" ) || \ - ( test "$mico_v_mid" -eq "$req_v_mid" && \ - test "$mico_v_min" -lt "$req_v_min" ) - -then - AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ -at least is required. You should upgrade MICO.]) -else - AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) -fi - -LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" -AC_SUBST(LIBMICO) -if test -z "$IDL"; then - IDL='$(kde_bindir)/cuteidl' -fi -AC_SUBST(IDL) -IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' -AC_SUBST(IDL_DEPENDENCIES) - -idldir="\$(includedir)/idl" -AC_SUBST(idldir) - -]) - -AC_DEFUN(KDE_CHECK_MINI_STL, -[ -AC_REQUIRE([KDE_CHECK_MICO]) - -AC_MSG_CHECKING(if we use mico's mini-STL) -AC_CACHE_VAL(kde_cv_have_mini_stl, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_cxxflags="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" -AC_TRY_COMPILE( -[ -#include -], -[ -#ifdef HAVE_MINI_STL -#error "nothing" -#endif -], -kde_cv_have_mini_stl=no, -kde_cv_have_mini_stl=yes) -CXXFLAGS="$kde_save_cxxflags" -AC_LANG_RESTORE -]) - -if test "x$kde_cv_have_mini_stl" = "xyes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -]) - - -AC_DEFUN(KDE_CHECK_LIBPTHREAD, -[ -AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) -AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN(KDE_CHECK_PTHREAD_OPTION, -[ - AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.], - kde_use_kernthreads=$enableval, kde_use_kernthreads=no) - - if test "$kde_use_kernthreads" = "yes"; then - ac_save_CXXFLAGS="$CXXFLAGS" - ac_save_CFLAGS="$CFLAGS" - CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" - CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" - AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h) - CXXFLAGS="$ac_save_CXXFLAGS" - CFLAGS="$ac_save_CFLAGS" - if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then - kde_use_kernthreads=no - else - dnl Add proper -I and -l statements - AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD - if test "x$LIBPTHREAD" = "x"; then - kde_use_kernthreads=no - else - USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" - fi - fi - else - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] ) - fi - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN(KDE_CHECK_THREADING, -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN(KDE_TRY_LINK_PYTHON, -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -AC_LANG_SAVE -AC_LANG_C -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi -AC_LANG_RESTORE - -fi - -]) - -AC_DEFUN(KDE_CHECK_PYTHON_DIR, -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -[ --with-pythondir=pythondir use python installed in pythondir ], -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN(KDE_CHECK_PYTHON_INTERN, -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" -AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN(KDE_CHECK_PYTHON, -[ - KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) -]) - -AC_DEFUN(KDE_CHECK_STL_SGI, -[ - AC_MSG_CHECKING([if STL implementation is SGI like]) - AC_CACHE_VAL(kde_cv_stl_type_sgi, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_type_sgi=yes, - kde_cv_stl_type_sgi=no) -]) - - AC_MSG_RESULT($kde_cv_stl_type_sgi) - - if test "$kde_cv_stl_type_sgi" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - fi -]) - -AC_DEFUN(KDE_CHECK_STL_HP, -[ - AC_MSG_CHECKING([if STL implementation is HP like]) - AC_CACHE_VAL(kde_cv_stl_type_hp, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hello World"; - astring.remove(0, 6); // now astring is "World" - return 0; -], kde_cv_stl_type_hp=yes, - kde_cv_stl_type_hp=no) -]) - AC_MSG_RESULT($kde_cv_stl_type_hp) - - if test "$kde_cv_stl_type_hp" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP]) - fi -]) - -AC_DEFUN(KDE_CHECK_STL, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - KDE_CHECK_STL_SGI - - if test "$kde_cv_stl_type_sgi" = "no"; then - KDE_CHECK_STL_HP - - if test "$kde_cv_stl_type_hp" = "no"; then - AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?") - fi - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN(AC_FIND_QIMGIO, - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN(KDE_CHECK_ANSI, -[ -]) - -AC_DEFUN(KDE_CHECK_INSURE, -[ - AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], - [ - if test $enableval = "no"; dnl - then ac_use_insure="no" - else ac_use_insure="yes" - fi - ], [ac_use_insure="no"]) - - AC_MSG_CHECKING(if we will use Insure++ to debug) - AC_MSG_RESULT($ac_use_insure) - if test "$ac_use_insure" = "yes"; dnl - then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? - fi -]) - -AC_DEFUN(AM_DISABLE_LIBRARIES, -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN(AC_CHECK_UTMP_FILE, -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN(KDE_CREATE_SUBDIRSLIST, -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - TOPSUBDIRS="" - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -else - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN(KDE_CHECK_NAMESPACES, -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_NEWLIBS, -[ - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_CHECK_S_ISSOCK, -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_LANG_SAVE -AC_LANG_C -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -AC_LANG_RESTORE -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_CHECK_KDEMAXPATHLEN, -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -AC_LANG_C -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN(KDE_CHECK_HEADER, -[ - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER($1, $2, $3, $4) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_HEADERS, -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_FAST_CONFIGURE, -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN(KDE_CONF_FILES, -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -AC_DEFUN(KDE_SET_PREFIX, -[ - unset CDPATH - dnl make $TDEDIR the default for the installation - AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superflous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN(KDE_LANG_CPLUSPLUS, -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -KDE_LANG_CPLUSPLUS -]) - -AC_DEFUN(KDE_CHECK_LONG_LONG, -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN(KDE_CHECK_LIB, -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN(KDE_JAVA_PREFIX, -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN(KDE_CHECK_JAVA_DIR, -[ - -AC_ARG_WITH(java, -[ --with-java=javadir use java installed in javadir, --without-java disables ], -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> look in $PATH - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - javadirs="$javadirs $dir" - done - IFS=$kde_save_IFS - jredirs= - - for dir in $javadirs; do - if test ! -d $dir; then break; fi - if test -x "$dir/java"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - done - - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - - else - JAVAC= - jni_includes= - fi - - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -else # no - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN(KDE_NEED_FLEX, -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN(AC_PATH_QTOPIA, -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_QT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_QTOPIA="-lqpe" - AC_SUBST(LIB_QTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_QTOPIA $LIBQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN(KDE_INIT_DOXYGEN, -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) -AC_MSG_RESULT($QTDOCDIR) - -AC_SUBST(QTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN(AC_FIND_BZIP2, -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_C -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(KDE_CHECK_SSL, -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - [ --with-ssl-dir=DIR where the root of OpenSSL is installed], - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$tdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - [ --without-ssl disable SSL checks], - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - AC_LANG_SAVE - AC_LANG_C - - ac_cflags_safe="$CFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CFLAGS="$CFLAGS -I$ssl_incdir $all_includes" - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - CFLAGS="$ac_cflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - AC_LANG_SAVE - AC_LANG_C - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_compile='${CC-gcc} $CFLAGS -I$ac_ssl_includes conftest.$ac_ext -o conftest' - if AC_TRY_EVAL(ac_compile); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 1.0.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - AC_LANG_RESTORE - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 1.0.6]) - fi -fi - -if test "$ssl_includes" = "/usr/include" || test "$ssl_includes" = "/usr/local/include" || test -z "$ssl_includes"; then - SSL_INCLUDES=""; -else - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN(KDE_CHECK_STRLCPY, -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN(KDE_CHECK_BINUTILS, -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- - -# serial 47 AC_PROG_LIBTOOL - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([LT_AC_PROG_SED])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" -])# _LT_AC_SYS_COMPILER - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-linux*) - # Test if the compiler is 64bit - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *"ELF 32"*) - LINUX_64_MODE="32" - ;; - *"ELF 64"*) - LINUX_64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $3" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - testring="ABCD" - - case $host_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring=$testring$testring - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - ifelse([$1],[],[save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"], - [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"], - [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS" - GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - # Append any errors to the config.log. - cat out/conftest.err 1>&AS_MESSAGE_LOG_FD - else - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - ifelse([$1],[],[CFLAGS="$save_CFLAGS"], - [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"], - [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"]) - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"` - if echo "$sys_lib_search_path_spec" | [egrep ';[C-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - if test "$host_cpu" = ia64; then - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - else - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - fi - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags=TAGS], - [include additional configurations @<:@CXX,GCJ@:>@])], - [tagnames="$withval"], - [tagnames="CXX,GCJ" - case $host_os in - mingw*|cygwin*) tagnames="$tagnames,RC" ;; - esac]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - AC_LIBTOOL_LANG_CXX_CONFIG - ;; - - GCJ) - AC_LIBTOOL_LANG_GCJ_CONFIG - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - available_tags="$available_tags $tagname" - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -#- set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -])# AC_PROG_LD - - -# AC_PROG_LD_GNU -# -------------- -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -])# AC_PROG_LD_GNU - - -# AC_PROG_LD_RELOAD_FLAG -# ---------------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], - lt_cv_ld_reload_flag, - [lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -])# AC_PROG_LD_RELOAD_FLAG - - -# AC_DEPLIBS_CHECK_METHOD -# ----------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependant libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - if test "$host_cpu" = ia64; then - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - else - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - fi - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; - -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# If this macro is not defined by Autoconf, define it here. -ifdef([AC_PROVIDE_IFELSE], - [], - [define([AC_PROVIDE_IFELSE], - [ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) -])# _LT_AC_LANG_CXX - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# -------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([AC_PROG_RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='main(){return(0);}' - -_LT_AC_SYS_COMPILER - -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' - ;; - esac -fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) - - -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_DLOPEN_SELF($1) - -# Report which librarie types wil actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= - -# Source file extension for C test sources. -ac_ext=cc - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int char *[]) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${CXX-"c++"} -set dummy $CC -compiler="[$]2" -_LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ - egrep 'GNU ld' > /dev/null; then - with_gnu_ld=yes - - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - egrep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux*) - if test $with_gnu_ld = no; then - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - else - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - fi - fi - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - else - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - fi - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc) - # Intel C++ - with_gnu_ld=yes - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - cxx) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - # NetBSD uses g++ - do we need to do anything? - ;; - osf3*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | egrep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -# Figure out "hidden" C++ library dependencies from verbose -# compiler output whening linking a shared library. -cat > conftest.$ac_ext <> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "$cfgfile" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments - _LT_AC_FILE_LTDLL_C - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments - _LT_AC_FILE_IMPGEN_C -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - cygwin* | mingw* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - fi - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - fi - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux*) - if test "$CC" = "icc"; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - fi - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - if test "x$host_vendor" = xsni; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD' - else - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - fi - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC" - ;; -esac -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - cygwin* | mingw* | pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an egrep regular expression of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left by newer dlltools. - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - ;; - esac - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi4*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - esac - - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9* | hpux10* | hpux11*) - if test "$GCC" = yes; then - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - esac - else - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - ;; - esac - fi - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - else - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - fi - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - if test "x$host_vendor" = xsni; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac -fi -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_FILE_IMPGEN_C -# -------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [ -# /* impgen.c starts here */ -# /* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break; - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 10000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" -]) -AC_MSG_RESULT([$SED]) -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 5 - -AC_PREREQ(2.52) - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional \"$1\" was never defined. -Usually this means the macro was only invoked conditionally.]) -fi])]) - -# Do all the work for Automake. -*- Autoconf -*- - -# This macro actually does too much some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 8 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -AC_PREREQ([2.52]) - -# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow -# the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl - AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl - -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_][CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_][CC], - defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_][CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_][CXX], - defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) - -# Copyright 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"]) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.6.3])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# -# Check to make sure that the build environment is sane. -# - -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# -*- Autoconf -*- - - -# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# AM_AUX_DIR_EXPAND - -# Copyright 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -# Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50]) - -AC_DEFUN([AM_AUX_DIR_EXPAND], [ -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. - -# Copyright 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# AM_PROG_INSTALL_STRIP - -# Copyright 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# serial 4 -*- Autoconf -*- - -# Copyright 1999, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null -AC_SUBST([DEPDIR]) -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -#serial 2 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*- - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST(am__include) -AC_SUBST(am__quote) -AC_MSG_RESULT($_am_result) -rm -f confinc confmf -]) - - -# Copyright 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -AC_PREREQ(2.50) - -# AM_PROG_LEX -# ----------- -# Autoconf leaves LEX=: if lex or flex can't be found. Change that to a -# "missing" invocation, for better error output. -AC_DEFUN([AM_PROG_LEX], -[AC_REQUIRE([AM_MISSING_HAS_RUN])dnl -AC_REQUIRE([AC_PROG_LEX])dnl -if test "$LEX" = :; then - LEX=${am_missing_run}flex -fi]) - -# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- - -# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_PREREQ([2.52]) - -# serial 6 - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. We must strip everything past the first ":", -# and everything past the last "/". - -# _AM_DIRNAME(PATH) -# ----------------- -# Like AS_DIRNAME, only do it during macro expansion -AC_DEFUN([_AM_DIRNAME], - [m4_if(regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, - m4_if(regexp([$1], [^//\([^/]\|$\)]), -1, - m4_if(regexp([$1], [^/.*]), -1, - [.], - patsubst([$1], [^\(/\).*], [\1])), - patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), - patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl -])# _AM_DIRNAME - - -# The stamp files are numbered to have different names. -# We could number them on a directory basis, but that's additional -# complications, let's have a unique counter. -m4_define([_AM_STAMP_Count], [0]) - - -# _AM_STAMP(HEADER) -# ----------------- -# The name of the stamp file for HEADER. -AC_DEFUN([_AM_STAMP], -[m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl -AS_ESCAPE(_AM_DIRNAME(patsubst([$1], - [:.*])))/stamp-h[]_AM_STAMP_Count]) - - -# _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS) -# ------------------------------------------------------------ -# We used to try to get a real timestamp in stamp-h. But the fear is that -# that will cause unnecessary cvs conflicts. -AC_DEFUN([_AM_CONFIG_HEADER], -[# Add the stamp file to the list of files AC keeps track of, -# along with our hook. -AC_CONFIG_HEADERS([$1], - [# update the timestamp -echo 'timestamp for $1' >"_AM_STAMP([$1])" -$2], - [$3]) -])# _AM_CONFIG_HEADER - - -# AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS) -# -------------------------------------------------------------- -AC_DEFUN([AM_CONFIG_HEADER], -[AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])]) -])# AM_CONFIG_HEADER - diff --git a/admin/Doxyfile.am b/admin/Doxyfile.am deleted file mode 100644 index 4697887..0000000 --- a/admin/Doxyfile.am +++ /dev/null @@ -1,163 +0,0 @@ -## generate API documentation with doxygen -apidox-am-yes: - @if test "$(subdir)" != "."; then \ - $(mkinstalldirs) $(top_builddir)/apidocs/$(subdir) ;\ - if test ! -x $(top_builddir)/apidocs/common; then \ - if test -d $(top_srcdir)/doc/common; then \ - common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\ - else \ - common_dir=$(kde_libs_htmldir)/en/common ;\ - fi ;\ - $(LN_S) $$common_dir $(top_builddir)/apidocs/common; \ - fi ;\ - cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \ - echo "PROJECT_NAME = \"$(subdir) Library\"" >> Doxyfile; \ - echo "PROJECT_NUMBER = \"Version $(VERSION)\"" >> Doxyfile; \ - echo "INPUT = $(srcdir)" >> Doxyfile; \ - echo "IMAGE_PATH = $(top_srcdir)/doc/api" >> Doxyfile ;\ - echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile; \ - echo "HTML_OUTPUT = $(subdir)/html" >> Doxyfile; \ - echo "LATEX_OUTPUT = $(subdir)/latex" >> Doxyfile; \ - echo "RTF_OUTPUT = $(subdir)/rtf" >> Doxyfile; \ - echo "MAN_OUTPUT = $(subdir)/man" >> Doxyfile; \ - echo "GENERATE_HTML = $(GENERATE_FLAG)" >> Doxyfile ;\ - echo "GENERATE_MAN = $(GENERATE_FLAG)" >> Doxyfile ;\ - echo "GENERATE_LATEX = $(GENERATE_FLAG)" >> Doxyfile ;\ - if test -n "$(DOXYGEN_EXCLUDE)"; then \ - echo "EXCLUDE_PATTERNS += $(DOXYGEN_EXCLUDE)" >> Doxyfile; \ - fi ;\ - echo "TAGFILES = \\" >> Doxyfile; \ - tags='$(DOXYGEN_REFERENCES) qt'; for tag in $$tags; do \ - tagpath= ;\ - path="../../$$tag" ;\ - if test -f $(top_builddir)/apidocs/$$tag/$$tag.tag; then \ - tagpath="$(top_builddir)/apidocs/$$tag/$$tag.tag" ;\ - else \ - tagpath=`ls -1 $(kde_htmldir)/en/*-apidocs/$$tag/$$tag.tag 2> /dev/null` ;\ - if test -n "$$tagpath"; then \ - path=`echo $$tagpath | sed -e "s,.*/\([^/]*-apidocs\)/$$tag/$$tag.tag,../../../\1/$$tag,"` ;\ - fi ;\ - fi ;\ - if test "$$tag" = qt; then \ - echo $$tagpath=$(QTDOCDIR) >> Doxyfile ;\ - else if test -n "$$tagpath"; then \ - echo "$$tagpath=$$path/html \\" >> Doxyfile ;\ - fi ;\ - fi ;\ - done ;\ - echo "GENERATE_TAGFILE = $(top_builddir)/apidocs/$(subdir)/$(subdir).tag" >> Doxyfile ;\ - echo "IGNORE_PREFIX = K" >> Doxyfile ;\ - echo "HAVE_DOT = $(KDE_HAVE_DOT)" >> Doxyfile ;\ - $(DOXYGEN) Doxyfile ;\ - fi - -apidox-am-no: - -install-data-local: install-apidox - -## install API documentation -install-apidox: - @if test "$(subdir)" != "."; then \ - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \ - if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \ - echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ - $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ - fi; \ - if test -d $(top_builddir)/apidocs/$(subdir)/html; then \ - list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \ - for file in $$list; do \ - echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ - $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ - done; \ - fi; \ - rm -f $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \ - $(LN_S) $(kde_libs_htmldir)/en/common $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \ - else\ - if test -d $(top_builddir)/apidocs; then \ - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\ - list=`cd $(top_builddir)/apidocs && ls -1`; \ - for file in $$list; do \ - if test -f $(top_builddir)/apidocs/$$file; then \ - echo $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ - $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ - fi; \ - done ; fi; \ - fi - -uninstall-local: uninstall-apidox - -## uninstall API documentation -uninstall-apidox: - @if test "$(subdir)" != "."; then \ - if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \ - rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ - fi\ - else\ - if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \ - rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ - fi\ - fi - -apidox: - @if test "$(subdir)" != "."; then \ - $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\ - else \ - $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\ - fi - @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \ - list='$(SUBDIRS)'; \ - for subdir in $$list; do \ - if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \ - echo "Making apidox in $$subdir"; \ - if test "$$subdir" != "."; then \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no apidox) || exit 1; \ - fi ; fi ;\ - done; \ - for subdir in $$list; do \ - if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \ - echo "Making apidox in $$subdir"; \ - if test "$$subdir" != "."; then \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=yes apidox) || exit 1; \ - fi ; fi ;\ - done; \ - fi - -apidox-am-toplevel-no: -apidox-am-toplevel-yes: - @echo "*** Creating API documentation main page"; \ - cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \ - echo "PROJECT_NAME = $(DOXYGEN_PROJECT_NAME)" >> Doxyfile ; \ - echo "PROJECT_NUMBER = $(DOXYGEN_PROJECT_NUMBER)" >> Doxyfile ; \ - echo "INPUT = $(top_srcdir)" >> Doxyfile ; \ - echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile ; \ - echo "FILE_PATTERNS = *.dox" >> Doxyfile ; \ - echo "RECURSIVE = NO" >> Doxyfile ; \ - echo "SOURCE_BROWSER = NO" >> Doxyfile ; \ - echo "ALPHABETICAL_INDEX = NO" >> Doxyfile ; \ - echo "HTML_OUTPUT = ." >> Doxyfile ; \ - echo "HTML_HEADER = apidocs/common/mainheader.html" >> Doxyfile ; \ - echo "HTML_FOOTER = apidocs/common/mainfooter.html" >> Doxyfile ; \ - echo "HTML_STYLESHEET = apidocs/common/doxygen.css" >> Doxyfile ; \ - echo "GENERATE_LATEX = NO" >> Doxyfile ; \ - echo "GENERATE_RTF = NO" >> Doxyfile ; \ - echo "GENERATE_MAN = NO" >> Doxyfile ; \ - echo "GENERATE_XML = NO" >> Doxyfile ; \ - echo "GENERATE_AUTOGEN_DEF = NO" >> Doxyfile ; \ - echo "ENABLE_PREPROCESSING = NO" >> Doxyfile ; \ - echo "CLASS_DIAGRAMS = NO" >> Doxyfile ; \ - echo "HAVE_DOT = NO" >> Doxyfile ; \ - echo "GENERATE_HTML = YES" >> Doxyfile ;\ - $(mkinstalldirs) $(top_builddir)/apidocs ; \ - rm -f $(top_builddir)/apidocs/common ; \ - if test -d $(top_srcdir)/doc/common; then \ - common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\ - else \ - common_dir=$(kde_libs_htmldir)/en/common ;\ - fi ;\ - $(LN_S) $$common_dir $(top_builddir)/apidocs/common ;\ - doxygen Doxyfile; \ - rm -f Doxyfile - -# Local Variables: -# mode: makefile -# End: diff --git a/admin/Doxyfile.global b/admin/Doxyfile.global deleted file mode 100644 index 50a237b..0000000 --- a/admin/Doxyfile.global +++ /dev/null @@ -1,954 +0,0 @@ -# Doxyfile 1.2.15 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# General configuration options -#--------------------------------------------------------------------------- - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = ../apidocs/ - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Brazilian, Chinese, Croatian, Czech, Danish, Dutch, Finnish, French, -# German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, -# Portuguese, Romanian, Russian, Slovak, Slovene, Spanish and Swedish. - -OUTPUT_LANGUAGE = English - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these class will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = YES - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = YES - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited -# members of a class in the documentation of that class as if those members were -# ordinary class members. Constructors, destructors and assignment operators of -# the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. It is allowed to use relative paths in the argument list. - -STRIP_FROM_PATH = - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower case letters. If set to YES upper case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# users are adviced to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explict @brief command for a brief description. - -JAVADOC_AUTOBRIEF = YES - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# reimplements. - -INHERIT_DOCS = YES - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = NO - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 4 - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = NO - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = NO - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -# @ref in KDE docu are for kdoc, doxygen doesn't need them, so we alias them -# to nothing here - -ALIASES = libdoc=@mainpage \ - sect=

\ - reimplemented= \ - "deprecated=This class or method is obsolete, it is provided for compatibility only." \ - obsolete=@deprecated \ - ref= - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consist of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. -# For instance some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. - -WARN_FORMAT = - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp -# *.h++ *.idl *.odl - -FILE_PATTERNS = *.h \ - *.cpp \ - *.cc \ - *.hpp - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories -# that are symbolic links (a Unix filesystem feature) are excluded from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. - -EXCLUDE_PATTERNS = *.moc.* \ - moc* \ - *.all_cpp.* \ - *unload.* \ - */test/* \ - */tests/* - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. - -INPUT_FILTER = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse. - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 3 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = K - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = NO - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = ../apidocs/common/header.html - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = ../apidocs/common/footer.html - -# The HTML_STYLESHEET tag can be used to specify a user defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet - -HTML_STYLESHEET = ../apidocs/common/doxygen.css - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the Html help documentation and to the tree view. - -TOC_EXPAND = NO - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = YES - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript and frames is required (for instance Mozilla, Netscape 4.0+, -# or Internet explorer 4.0+). Note that for large projects the tree generation -# can take a very long time. In such cases it is better to disable this feature. -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be invoked. If left blank `latex' will be used as the default command name. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = NO - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = NO - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimised for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assigments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .kde3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_XML = NO - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. - -PREDEFINED = TQT_VERSION=305 - -# If the MACRO_EXPANSION and EXPAND_PREDEF_ONLY tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line and do not end with a semicolon. Such function macros are typically -# used for boiler-plate code, and will confuse the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::addtions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES tag can be used to specify one or more tagfiles. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = NO - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in Html, RTF and LaTeX) for classes with base or -# super classes. Setting the tag to NO turns the diagrams off. Note that this -# option is superceded by the HAVE_DOT option below. This is only a fallback. It is -# recommended to install and use dot, since it yield more powerful graphs. - -CLASS_DIAGRAMS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = YES - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = NO - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found on the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_WIDTH = 800 - -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_HEIGHT = 1024 - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermedate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES - -#--------------------------------------------------------------------------- -# Configuration::addtions related to the search engine -#--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - -SEARCHENGINE = NO - -# The CGI_NAME tag should be the name of the CGI script that -# starts the search engine (doxysearch) with the correct parameters. -# A script with this name will be generated by doxygen. - -CGI_NAME = - -# The CGI_URL tag should be the absolute URL to the directory where the -# cgi binaries are located. See the documentation of your http daemon for -# details. - -CGI_URL = - -# The DOC_URL tag should be the absolute URL to the directory where the -# documentation is located. If left blank the absolute path to the -# documentation, with file:// prepended to it, will be used. - -DOC_URL = - -# The DOC_ABSPATH tag should be the absolute path to the directory where the -# documentation is located. If left blank the directory on the local machine -# will be used. - -DOC_ABSPATH = - -# The BIN_ABSPATH tag must point to the directory where the doxysearch binary -# is installed. - -BIN_ABSPATH = - -# The EXT_DOC_PATHS tag can be used to specify one or more paths to -# documentation generated for other projects. This allows doxysearch to search -# the documentation for these projects as well. - -EXT_DOC_PATHS = diff --git a/admin/Makefile.common b/admin/Makefile.common deleted file mode 100644 index 875d95a..0000000 --- a/admin/Makefile.common +++ /dev/null @@ -1,34 +0,0 @@ -### Makefile.common -### -### Copyright (C) 2002 by the KDE developers - -### All the real work is done by the shellscript cvs.sh - -SHELL=/bin/sh - -cvs dist cvs-clean configure configure.in configure.files subdirs package-messages package-merge Makefile.am: - @admindir=$(admindir); \ - if test "x$$admindir" = x; then \ - admindir=.; until test -f $$admindir/admin/cvs.sh; do \ - admindir=$$admindir/..; \ - if test `cd $$admindir && pwd` = / ; then break; fi; \ - done; \ - admindir=$$admindir/admin; \ - if test -f $$admindir/cvs.sh; then :; else \ - echo "Can't find the admin/ directory in any parent of the"; \ - echo "current directory. Please set it with admindir=..."; \ - exit 1; \ - fi; \ - fi; \ - if test "$@" = "package-merge"; then \ - MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \ - $(SHELL) $$admindir/cvs.sh package-merge ;\ - else MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\ - fi - -configure.in: configure.files $(shell test -f configure.files && cat configure.files) subdirs -configure.files: subdirs - -.SILENT: - -.PHONY: cvs dist cvs-clean package-merge package-messages diff --git a/admin/acinclude.m4.in b/admin/acinclude.m4.in deleted file mode 100644 index 200486d..0000000 --- a/admin/acinclude.m4.in +++ /dev/null @@ -1,5443 +0,0 @@ -## -*- autoconf -*- - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for tdelibs -dnl and tdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN(KDE_PATH_X_DIRECT, -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK(, [${x_direct_test_function}()], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \ - /usr/X11/lib${tdelibsuff} \ - /usr/X11R6/lib${tdelibsuff} \ - /usr/X11R5/lib${tdelibsuff} \ - /usr/X11R4/lib${tdelibsuff} \ - \ - /usr/lib${tdelibsuff}/X11 \ - /usr/lib${tdelibsuff}/X11R6 \ - /usr/lib${tdelibsuff}/X11R5 \ - /usr/lib${tdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${tdelibsuff} \ - /usr/local/X11R6/lib${tdelibsuff} \ - /usr/local/X11R5/lib${tdelibsuff} \ - /usr/local/X11R4/lib${tdelibsuff} \ - \ - /usr/local/lib${tdelibsuff}/X11 \ - /usr/local/lib${tdelibsuff}/X11R6 \ - /usr/local/lib${tdelibsuff}/X11R5 \ - /usr/local/lib${tdelibsuff}/X11R4 \ - \ - /usr/X386/lib${tdelibsuff} \ - /usr/x386/lib${tdelibsuff} \ - /usr/XFree86/lib${tdelibsuff}/X11 \ - \ - /usr/lib${tdelibsuff} \ - /usr/local/lib${tdelibsuff} \ - /usr/unsupported/lib${tdelibsuff} \ - /usr/athena/lib${tdelibsuff} \ - /usr/local/x11r5/lib${tdelibsuff} \ - /usr/lpp/Xamples/lib${tdelibsuff} \ - /lib/usr/lib${tdelibsuff}/X11 \ - \ - /usr/openwin/lib${tdelibsuff} \ - /usr/openwin/share/lib${tdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_FIND_FILE, -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(programm-name, variable-name, list of directories, -dnl if-not-found, test-parameter) -AC_DEFUN(KDE_FIND_PATH, -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - dirs="$3" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN(KDE_MOC_ERROR_MESSAGE, -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN(KDE_UIC_ERROR_MESSAGE, -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN(KDE_CHECK_UIC_FLAG, -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $QTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_PATH_QT_MOC_UIC, -[ - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - elif test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistant],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - UIC=$UIC_PATH - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN(KDE_1_CHECK_PATHS, -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN(KDE_SET_PATHS, -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN(KDE_SET_DEFAULT_PATHS, -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${prefix}/share/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${prefix}/share/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${prefix}/share/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${prefix}/share/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${prefix}/share/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${prefix}/share/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${prefix}/share/config' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${prefix}/share/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${prefix}/share/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${prefix}/share/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${prefix}/share/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${prefix}/share/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${prefix}/share/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN(KDE_CHECK_PATHS_FOR_COMPLETENESS, -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "xdg_directorydir" - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN(KDE_MISSING_PROG_ERROR, -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN(KDE_MISSING_ARTS_ERROR, -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly. -]) -]) - -AC_DEFUN(KDE_SUBST_PROGRAMS, -[ - AC_ARG_WITH(arts, - [ --without-arts build without aRts [default=detect] ], - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no") - - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs" - if test -n "$TDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $TDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" != "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(tde-config, KDECONFIG, [$kde_default_bindirs]) - KDE_FIND_PATH(brockenboring, BROCKENBORING, [$kde_default_bindirs]) - if test -n "$BROCKENBORING"; then - KDE_FIND_PATH(tdeinit_wrapper, BROCKENBORING, [$kde_default_bindirs]) - fi - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(KDECONFIG) - AC_SUBST(BROCKENBORING) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - - if test -x "$KDECONFIG"; then # it can be "compiled" - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - else - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - fi - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) -])dnl - -AC_DEFUN(AC_CREATE_KFSSTND, -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN(AC_SUBST_KFSSTND, -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(tdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN(KDE_MISC_TESTS, -[ - AC_LANG_C - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_LANG_C - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # darwin needs this to initialize the environment - AC_CHECK_HEADERS(crt_externs.h) - AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-framework CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(K_PATH_X, -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - [ --enable-embedded link to Qt-embedded, don't use X], - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - [ --enable-qtopia link to Qt-embedded, link to the Qtopia Environment], - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -if test "$kde_use_qt_emb" = "no"; then - -AC_MSG_CHECKING(for X) -AC_LANG_SAVE -AC_LANG_C -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${tdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS" - -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_libraries) -AC_SUBST(x_includes) - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -AC_SUBST(LIBSM) -LDFLAGS="$ac_save_LDFLAGS" - -AC_SUBST(X_PRE_LIBS) - -LIB_X11='-lX11 $(LIBSOCKET)' -AC_SUBST(LIB_X11) - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no - ) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe - ]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -else - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" - AC_SUBST(X_PRE_LIBS) - AC_SUBST(LIB_X11) - AC_SUBST(LIBSM) - AC_SUBST(X_INCLUDES) - AC_SUBST(X_LDFLAGS) - AC_SUBST(x_includes) - AC_SUBST(x_libraries) -fi -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - - -AC_LANG_RESTORE - -]) - -AC_DEFUN(KDE_PRINT_QT_PROGRAM, -[ -AC_REQUIRE([KDE_USE_QT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) -dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_PATH_QT_1_3, -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_QT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - [ --disable-mt link to non-threaded Qt (deprecated)], - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-tqt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -if test -z "$LIBQT"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" - else - qtlib="qt" - fi - - kde_int_qt="-l$qtlib" -else - kde_int_qt="$LIBQT" - kde_lib_qt_set=yes -fi - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-tqt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - if test -z "$LIBQT"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - else - LIBQT="$qtlib-mt" - kde_int_qt="$qtlib-mt" - fi - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBQT="$LIBQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" -AC_ARG_WITH(qt-dir, - [ --with-qt-dir=DIR where the root of Qt is installed ], - [ ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${tdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - [ --with-qt-includes=DIR where the Qt includes are. ], - [ - ac_qt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - [ --with-qt-libraries=DIR where the Qt library is installed.], - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=ntqstyle.h -else - kde_qt_header=ntqglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes"; then -KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(qt_includes) - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$all_libraries $QT_LDFLAGS" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(QT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_QT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" - -AC_SUBST(LIB_QT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN(AC_PATH_QT, -[ -AC_PATH_QT_1_3 -]) - -AC_DEFUN(KDE_CHECK_UIC_PLUGINS, -[ -AC_REQUIRE([AC_PATH_QT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([you need to install tdelibs first.]) -fi -fi -]) - -AC_DEFUN(KDE_CHECK_FINAL, -[ - AC_ARG_ENABLE(final, [ --enable-final build size optimized apps (experimental - needs lots of memory)], - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN(KDE_CHECK_CLOSURE, -[ - AC_ARG_ENABLE(closure, [ --disable-closure don't delay template instantiation], - kde_use_closure=$enableval, kde_use_closure=yes) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -AC_DEFUN(KDE_CHECK_NMCHECK, -[ - AC_ARG_ENABLE(nmcheck, [ --enable-nmcheck enable automatic namespace cleanness check], - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_BASE_PATH_KDE, -[ -AC_PREREQ([2.13]) -AC_REQUIRE([AC_PATH_QT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${prefix}/include - ac_kde_includes=$prefix/include - - if test "${exec_prefix}" != NONE; then - kde_libraries=${libdir} - ac_kde_libraries=$libdir - if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then - ac_kde_libraries=$exec_prefix/lib${tdelibsuff} - fi - else - kde_libraries=${prefix}/lib${tdelibsuff} - ac_kde_libraries=$prefix/lib${tdelibsuff} - fi -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libtdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libtdeio.la" -fi - -if test -z "$1"; then - -kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}" -test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/tdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by tdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1 - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes=${ac_kde_prefix}/include - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$all_libraries $KDE_LDFLAGS" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN(KDE_CHECK_EXTRA_LIBS, -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes, [ --with-extra-includes=DIR - adds non standard include paths], - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs, [ --with-extra-libs=DIR adds non standard library paths], - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN(KDE_1_CHECK_PATH_HEADERS, -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_KDEQTADDON, -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdeqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/tde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdeqtaddon=yes, - kde_cv_have_kdeqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdeqtaddon) - -if test "$kde_cv_have_kdeqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN(KDE_CHECK_KIMGIO, -[ - AC_REQUIRE([AC_BASE_PATH_KDE]) - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - AC_REQUIRE([AC_FIND_TIFF]) - AC_REQUIRE([AC_FIND_JPEG]) - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JASPER]) - AC_REQUIRE([KDE_CREATE_LIBS_ALIASES]) - - if test "$1" = "existance"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $LIBJPEG $LIBTIFF $LIBPNG $LIBQT -lm" - AC_CHECK_LIB(kimgio, kimgioRegister, [ - LIBKIMGIO_EXISTS=yes],LIBKIMGIO_EXISTS=no) - LIBS="$kde_save_LIBS" - AC_LANG_RESTORE - else - LIBKIMGIO_EXISTS=yes - fi - - if test "$LIBKIMGIO_EXISTS" = "yes"; then - LIB_KIMGIO='-lkimgio' - else - LIB_KIMGIO='' - fi - AC_SUBST(LIB_KIMGIO) -]) - -AC_DEFUN(KDE_CREATE_LIBS_ALIASES, -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-ltdeabc") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -# these are for backward compatibility - AC_SUBST(LIB_TDESYCOCA, "-ltdeio") - AC_SUBST(LIB_KFILE, "-ltdeio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_TDECORE, "-ltdecore") - AC_SUBST(LIB_TDEUI, "-ltdeui") - AC_SUBST(LIB_TDEIO, "-ltdeio") - AC_SUBST(LIB_TDESYCOCA, "-ltdesycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-ltdefile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_TDEHTML, "-ltdehtml") - AC_SUBST(LIB_TDESPELL, "-ltdespell") - AC_SUBST(LIB_TDEPARTS, "-ltdeparts") - AC_SUBST(LIB_TDEPRINT, "-ltdeprint") -else - AC_SUBST(LIB_TDECORE, "-ltdecore -lXext $(LIB_QT)") - AC_SUBST(LIB_TDEUI, "-ltdeui $(LIB_TDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_TDECORE)") - AC_SUBST(LIB_KFILE, "-ltdefile $(LIB_KFM) $(LIB_TDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_TDECORE)") -fi -]) - -AC_DEFUN(AC_PATH_KDE, -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check, [ --disable-path-check don't try to find out, where to install], - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN(KDE_CHECK_FUNC_EXT, -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libtdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" -#endif -$4; -#endif -]) -]) - -AC_DEFUN(AC_CHECK_SETENV, -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN(AC_CHECK_UNSETENV, -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN(AC_CHECK_GETDOMAINNAME, -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN(AC_CHECK_GETHOSTNAME, -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN(AC_CHECK_USLEEP, -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN(AC_CHECK_RANDOM, -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN(AC_CHECK_INITGROUPS, -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN(AC_CHECK_MKSTEMPS, -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN(AC_CHECK_MKDTEMP, -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN(AC_CHECK_RES_INIT, -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - AC_MSG_CHECKING([if res_init is available]) - AC_TRY_COMPILE( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) -]) - -AC_DEFUN(AC_CHECK_STRLCPY, -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN(AC_CHECK_STRLCAT, -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN(AC_FIND_GIF, - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the tdesupport package) -fi -]) - -AC_DEFUN(KDE_FIND_JPEG_HELPER, -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -AC_LANG_C -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[/* Override any gcc2 internal prototype to avoid an error. */ -struct jpeg_decompress_struct; -typedef struct jpeg_decompress_struct * j_decompress_ptr; -typedef int size_t; -#ifdef __cplusplus -extern "C" { -#endif - void jpeg_CreateDecompress(j_decompress_ptr cinfo, - int version, size_t structsize); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [jpeg_CreateDecompress(0L, 0, 0);], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN(AC_FIND_JPEG, -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in tdehtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN(KDE_CHECK_QT_JPEG, -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN(AC_FIND_ZLIB, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -AC_LANG_C -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN(KDE_TRY_TIFFLIB, -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN(AC_FIND_TIFF, -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - - -AC_DEFUN(AC_FIND_PNG, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_LANG_C -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN(AC_FIND_JASPER, -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_LANG_C -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN(AC_CHECK_BOOL, -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN(AC_CHECK_GNU_EXTENSIONS, -[ -AC_MSG_CHECKING(if you need GNU extensions) -AC_CACHE_VAL(ac_cv_gnu_extensions, -[ -cat > conftest.c << EOF -#include - -#ifdef __GNU_LIBRARY__ -yes -#endif -EOF - -if (eval "$ac_cpp conftest.c") 2>&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_gnu_extensions=yes -else - ac_cv_gnu_extensions=no -fi -]) - -AC_MSG_RESULT($ac_cv_gnu_extensions) -if test "$ac_cv_gnu_extensions" = "yes"; then - AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) -fi -]) - -AC_DEFUN(KDE_CHECK_COMPILER_FLAG, -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN(AC_REMOVE_FORBIDDEN, -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN(AC_VALIDIFY_CXXFLAGS, -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN(AC_CHECK_COMPILERS, -[ - AC_ARG_ENABLE(debug,[ --enable-debug[=ARG] enables debug symbols (yes|no|full) [default=no]], - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption,[ --disable-debug disables debug output and debug symbols [default=no]],[],[]) - - AC_ARG_ENABLE(strict,[ --enable-strict compiles with strict compiler options (may not work!)], - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,[ --disable-warnings disables compilation with -Wall and similiar], - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,[ --enable-profile creates profiling infos [default=no]], - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 $CFLAGS" - else - CFLAGS="-g -O2 $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 $CXXFLAGS" - else - CXXFLAGS="-g -O2 $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - case $host in - *-*-linux-gnu) - CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - if test "$GXX" = "yes"; then - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - fi - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - AC_ARG_ENABLE(pch,[ --enable-pch enables precompiled header support (currently only KCC) [default=no]], - [ - kde_use_pch=$enableval - ],[kde_use_pch=no]) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN(KDE_ADD_DEPENDENCIES, -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN(KDE_PROG_LIBTOOL, -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_LANG_SAVE -AC_LANG_C -AC_OBJEXT -AC_EXEEXT -AC_LANG_RESTORE - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -AC_ARG_ENABLE(objprelink, [ --enable-objprelink prelink apps using objprelink (obsolete)], - kde_use_objprelink=$enableval, kde_use_objprelink=no) - if test "x$kde_use_objprelink" = "xyes"; then - AC_MSG_WARN([ ------------------------------------------------------------- -Configuration option --enable-objprelink is no longer useful. -See http:://objprelink.sourceforge.net for details: -1- Recent binutils are fast enough to do without objprelink. -2- Newer versions of objprelink do not need this option. ------------------------------------------------------------- -]) - fi -]) - -AC_DEFUN(KDE_CHECK_LIB64, -[ - tdelibsuff=none - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none[=default])]), - tdelibsuff=$enableval) - # TODO: add an auto case that compiles a little C app to check - # where the glibc is - if test "$tdelibsuff" = "none"; then - tdelibsuff= - fi - if test -z "$tdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${tdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${tdelibsuff}\""], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $tdelibsuff]) - fi -]) - -AC_DEFUN(KDE_CHECK_TYPES, -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -AC_DEFUN(KDE_DO_IT_ALL, -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN(AC_CHECK_RPATH, -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - [ --disable-rpath do not use the rpath feature of ld], - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(kde_libraries)" - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN(AC_CHECK_SOCKLEN_T, [ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(ac_cv_socklen_t, [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ -#include -#include - ],[ -socklen_t a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=socklen_t, - AC_TRY_COMPILE([ -#include -#include - ],[ -int a=0; -getsockname(0,(struct sockaddr*)0, &a); - ], - ac_cv_socklen_t=int, - ac_cv_socklen_t=size_t - ) - ) - AC_LANG_RESTORE - ]) - - AC_MSG_RESULT($ac_cv_socklen_t) - if test "$ac_cv_socklen_t" != "socklen_t"; then - AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, - [Define the real type of socklen_t]) - fi - AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) - -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN(AM_KDE_WITH_NLS, - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN(AM_PATH_PROG_WITH_TEST_KDE, -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN(AM_LC_MESSAGES, - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN(AM_KDE_GNU_GETTEXT, - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN(AC_HAVE_XPM, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm, [ --without-xpm disable color pixmap XPM tests], - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - AC_LANG_C - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN(AC_HAVE_DPMS, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms, [ --without-dpms disable DPMS power saving], - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - AC_LANG_C - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" - LIBS="$LIBS -lXdpms" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN(AC_HAVE_GL, - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl, [ --without-gl disable 3D GL modes], - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags="$LDFLAGS" - ac_save_cxxflags="$CXXFLAGS" - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" - test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="mesa", ac_cv_have_gl="no") - if test "x$ac_cv_have_gl" = "xno"; then - LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL" - test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" - LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$ac_save_cflags $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - fi - AC_LANG_RESTORE - LDFLAGS="$ac_save_ldflags" - CXXFLAGS="$ac_save_cxxflags" - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)' - else - GLLIB='-lGLU -lGL $(LIB_X11)' - fi - else - if test "$ac_cv_have_gl" = "mesa"; then - GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN(KDE_PAM, [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - AC_ARG_WITH(pam, - [ --with-pam[=ARG] enable support for PAM: ARG=[yes|no|service name]], - [ if test "x$withval" = "xyes"; then - use_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - use_pam=no - else - use_pam=yes - pam_service=$withval - fi - ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" - ], [ - AC_CACHE_VAL(ac_cv_path_pam, - [ use_pam=no - AC_CHECK_LIB(pam, pam_start, - [ AC_CHECK_HEADER(security/pam_appl.h, - [ use_pam=yes - pam_service=kde ]) - ], , $LIBDL) - ac_cv_path_pam="use_pam=$use_pam pam_service=$pam_service" - ]) - ]) - eval "$ac_cv_path_pam" - - AC_MSG_CHECKING(for PAM) - if test "x$use_pam" = xno; then - AC_MSG_RESULT(no) - PAMLIBS="" - else - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], security/pam_appl.h, - [ AC_EGREP_HEADER([const struct pam_message], security/pam_appl.h, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN(DEF_PAM_SERVICE, [ - AC_ARG_WITH($1-pam, - [ --with-$1-pam=[val] override PAM service from --with-pam for $2], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$withval" - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN(KDE_SHADOWPASSWD, [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - [ --with-shadow If you want shadow password support ], - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN(KDE_PASSWDLIBS, [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN(KDE_CHECK_LIBDL, -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN(KDE_CHECK_DLOPEN, -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -[ --disable-dlopen link statically [default=no]] , -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN(KDE_CHECK_DYNAMIC_LOADING, -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN(KDE_ADD_INCLUDES, -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - - -AC_DEFUN(KDE_CHECK_MICO, -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_MISC_TESTS]) -AC_MSG_CHECKING(for MICO) - -if test -z "$MICODIR"; then - kde_micodir=/usr/local - else - kde_micodir="$MICODIR" -fi - -AC_ARG_WITH(micodir, - [ --with-micodir=micodir where mico is installed ], - kde_micodir=$withval, - kde_micodir=$kde_micodir -) - -AC_CACHE_VAL(kde_cv_mico_incdir, -[ - mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" -AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) - -]) -kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` - -if test ! -r $kde_micodir/include/CORBA.h; then - AC_MSG_ERROR([No CORBA.h found, specify another micodir]) -fi - -AC_MSG_RESULT($kde_micodir) - -MICO_INCLUDES=-I$kde_micodir/include -AC_SUBST(MICO_INCLUDES) -MICO_LDFLAGS=-L$kde_micodir/lib -AC_SUBST(MICO_LDFLAGS) -micodir=$kde_micodir -AC_SUBST(micodir) - -AC_MSG_CHECKING([for MICO version]) -AC_CACHE_VAL(kde_cv_mico_version, -[ -AC_LANG_C -cat >conftest.$ac_ext < -#include -int main() { - - printf("MICO_VERSION=%s\n",MICO_VERSION); - return (0); -} -EOF -ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' -if AC_TRY_EVAL(ac_compile); then - if eval `./conftest 2>&5`; then - kde_cv_mico_version=$MICO_VERSION - else - AC_MSG_ERROR([your system is not able to execute a small application to - find MICO version! Check $kde_micodir/include/mico/version.h]) - fi -else - AC_MSG_ERROR([your system is not able to compile a small application to - find MICO version! Check $kde_micodir/include/mico/version.h]) -fi -]) - -dnl installed MICO version -mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` -mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` -mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` - -if test "x$1" = "x"; then - req_version="2.3.0" -else - req_version=$1 -fi - -dnl required MICO version -req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` -req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` -req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` - -if test "$mico_v_maj" -lt "$req_v_maj" || \ - ( test "$mico_v_maj" -eq "$req_v_maj" && \ - test "$mico_v_mid" -lt "$req_v_mid" ) || \ - ( test "$mico_v_mid" -eq "$req_v_mid" && \ - test "$mico_v_min" -lt "$req_v_min" ) - -then - AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ -at least is required. You should upgrade MICO.]) -else - AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) -fi - -LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" -AC_SUBST(LIBMICO) -if test -z "$IDL"; then - IDL='$(kde_bindir)/cuteidl' -fi -AC_SUBST(IDL) -IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' -AC_SUBST(IDL_DEPENDENCIES) - -idldir="\$(includedir)/idl" -AC_SUBST(idldir) - -]) - -AC_DEFUN(KDE_CHECK_MINI_STL, -[ -AC_REQUIRE([KDE_CHECK_MICO]) - -AC_MSG_CHECKING(if we use mico's mini-STL) -AC_CACHE_VAL(kde_cv_have_mini_stl, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_cxxflags="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" -AC_TRY_COMPILE( -[ -#include -], -[ -#ifdef HAVE_MINI_STL -#error "nothing" -#endif -], -kde_cv_have_mini_stl=no, -kde_cv_have_mini_stl=yes) -CXXFLAGS="$kde_save_cxxflags" -AC_LANG_RESTORE -]) - -if test "x$kde_cv_have_mini_stl" = "xyes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -]) - - -AC_DEFUN(KDE_CHECK_LIBPTHREAD, -[ -AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) -AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN(KDE_CHECK_PTHREAD_OPTION, -[ - AC_ARG_ENABLE(kernel-threads, [ --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only.], - kde_use_kernthreads=$enableval, kde_use_kernthreads=no) - - if test "$kde_use_kernthreads" = "yes"; then - ac_save_CXXFLAGS="$CXXFLAGS" - ac_save_CFLAGS="$CFLAGS" - CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" - CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" - AC_CHECK_HEADERS(pthread/linuxthreads/pthread.h) - CXXFLAGS="$ac_save_CXXFLAGS" - CFLAGS="$ac_save_CFLAGS" - if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then - kde_use_kernthreads=no - else - dnl Add proper -I and -l statements - AC_CHECK_LIB(lthread, pthread_join, [LIBPTHREAD="-llthread -llgcc_r"]) dnl for FreeBSD - if test "x$LIBPTHREAD" = "x"; then - kde_use_kernthreads=no - else - USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" - fi - fi - else - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-pthread"] ) - fi - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN(KDE_CHECK_THREADING, -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading, [ --disable-threading disables threading even if libpthread found ], - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN(KDE_TRY_LINK_PYTHON, -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -AC_LANG_SAVE -AC_LANG_C -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi -AC_LANG_RESTORE - -fi - -]) - -AC_DEFUN(KDE_CHECK_PYTHON_DIR, -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -[ --with-pythondir=pythondir use python installed in pythondir ], -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN(KDE_CHECK_PYTHON_INTERN, -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" -AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -python_libdirs="$ac_python_dir/lib /usr/lib /usr/local /usr/lib $kde_extra_libs" -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN(KDE_CHECK_PYTHON, -[ - KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) -]) - -AC_DEFUN(KDE_CHECK_STL_SGI, -[ - AC_MSG_CHECKING([if STL implementation is SGI like]) - AC_CACHE_VAL(kde_cv_stl_type_sgi, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_type_sgi=yes, - kde_cv_stl_type_sgi=no) -]) - - AC_MSG_RESULT($kde_cv_stl_type_sgi) - - if test "$kde_cv_stl_type_sgi" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - fi -]) - -AC_DEFUN(KDE_CHECK_STL_HP, -[ - AC_MSG_CHECKING([if STL implementation is HP like]) - AC_CACHE_VAL(kde_cv_stl_type_hp, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hello World"; - astring.remove(0, 6); // now astring is "World" - return 0; -], kde_cv_stl_type_hp=yes, - kde_cv_stl_type_hp=no) -]) - AC_MSG_RESULT($kde_cv_stl_type_hp) - - if test "$kde_cv_stl_type_hp" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_HP_STL, 1, [Define if you have a STL implementation by HP]) - fi -]) - -AC_DEFUN(KDE_CHECK_STL, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - KDE_CHECK_STL_SGI - - if test "$kde_cv_stl_type_sgi" = "no"; then - KDE_CHECK_STL_HP - - if test "$kde_cv_stl_type_hp" = "no"; then - AC_MSG_ERROR("no known STL type found - did you forget to install libstdc++[-devel] ?") - fi - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN(AC_FIND_QIMGIO, - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN(KDE_CHECK_ANSI, -[ -]) - -AC_DEFUN(KDE_CHECK_INSURE, -[ - AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], - [ - if test $enableval = "no"; dnl - then ac_use_insure="no" - else ac_use_insure="yes" - fi - ], [ac_use_insure="no"]) - - AC_MSG_CHECKING(if we will use Insure++ to debug) - AC_MSG_RESULT($ac_use_insure) - if test "$ac_use_insure" = "yes"; dnl - then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? - fi -]) - -AC_DEFUN(AM_DISABLE_LIBRARIES, -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN(AC_CHECK_UTMP_FILE, -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN(KDE_CREATE_SUBDIRSLIST, -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - TOPSUBDIRS="" - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -else - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN(KDE_CHECK_NAMESPACES, -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_NEWLIBS, -[ - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_CHECK_S_ISSOCK, -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_LANG_SAVE -AC_LANG_C -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -AC_LANG_RESTORE -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(AC_CHECK_KDEMAXPATHLEN, -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -AC_LANG_C -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN(KDE_CHECK_HEADER, -[ - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER($1, $2, $3, $4) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_CHECK_HEADERS, -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN(KDE_FAST_CONFIGURE, -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, [ --disable-fast-perl disable fast Makefile generation (needs perl)], - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN(KDE_CONF_FILES, -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -AC_DEFUN(KDE_SET_PREFIX, -[ - unset CDPATH - dnl make $TDEDIR the default for the installation - AC_PREFIX_DEFAULT(${TDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superflous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN(KDE_LANG_CPLUSPLUS, -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -KDE_LANG_CPLUSPLUS -]) - -AC_DEFUN(KDE_CHECK_LONG_LONG, -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN(KDE_CHECK_LIB, -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN(KDE_JAVA_PREFIX, -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN(KDE_CHECK_JAVA_DIR, -[ - -AC_ARG_WITH(java, -[ --with-java=javadir use java installed in javadir, --without-java disables ], -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> look in $PATH - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - javadirs="$javadirs $dir" - done - IFS=$kde_save_IFS - jredirs= - - for dir in $javadirs; do - if test ! -d $dir; then break; fi - if test -x "$dir/java"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - done - - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - - else - JAVAC= - jni_includes= - fi - - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -else # no - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN(KDE_NEED_FLEX, -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN(AC_PATH_QTOPIA, -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_QT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_QTOPIA="-lqpe" - AC_SUBST(LIB_QTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - [ --with-qtopia-dir=DIR where the root of Qtopia is installed ], - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_QTOPIA $LIBQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN(KDE_INIT_DOXYGEN, -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(ntqsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) -AC_MSG_RESULT($QTDOCDIR) - -AC_SUBST(QTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/ntqsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN(AC_FIND_BZIP2, -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_C -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN(KDE_CHECK_SSL, -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - [ --with-ssl-dir=DIR where the root of OpenSSL is installed], - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$tdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - [ --without-ssl disable SSL checks], - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$tdelibsuff /usr/local/lib$tdelibsuff /usr/ssl/lib$tdelibsuff /usr/local/ssl/lib$tdelibsuff $libdir $prefix/lib$tdelibsuff $exec_prefix/lib$tdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - AC_LANG_SAVE - AC_LANG_C - - ac_cflags_safe="$CFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CFLAGS="$CFLAGS -I$ssl_incdir $all_includes" - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - CFLAGS="$ac_cflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - AC_LANG_SAVE - AC_LANG_C - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_compile='${CC-gcc} $CFLAGS -I$ac_ssl_includes conftest.$ac_ext -o conftest' - if AC_TRY_EVAL(ac_compile); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 1.0.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - AC_LANG_RESTORE - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 1.0.6]) - fi -fi - -if test "$ssl_includes" = "/usr/include" || test "$ssl_includes" = "/usr/local/include" || test -z "$ssl_includes"; then - SSL_INCLUDES=""; -else - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN(KDE_CHECK_STRLCPY, -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN(KDE_CHECK_BINUTILS, -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) diff --git a/admin/am_edit b/admin/am_edit deleted file mode 100644 index 128b790..0000000 --- a/admin/am_edit +++ /dev/null @@ -1,2188 +0,0 @@ -#!/usr/bin/perl -w - -# Expands the specialised KDE tags in Makefile.in to (hopefully) valid -# make syntax. -# When called without file parameters, we work recursively on all Makefile.in -# in and below the current subdirectory. When called with file parameters, -# only those Makefile.in are changed. -# The currently supported tags are -# -# {program}_METASOURCES -# where you have a choice of two styles -# {program}_METASOURCES = name1.moc name2.moc ... [\] -# {program}_METASOURCES = AUTO -# The second style requires other tags as well. -# -# To install icons : -# KDE_ICON = iconname iconname2 ... -# KDE_ICON = AUTO -# -# For documentation : -# http://developer.kde.org/documentation/other/developer-faq.html -# -# and more new tags TBD! -# -# The concept (and base code) for this program came from automoc, -# supplied by the following -# -# Matthias Ettrich (The originator) -# Kalle Dalheimer (The original implementator) -# Harri Porten -# Alex Zepeda -# David Faure -# Stephan Kulow - -use Cwd; -use File::Find; -use File::Basename; - -# Prototype the functions -sub initialise (); -sub processMakefile ($); -sub updateMakefile (); -sub restoreMakefile (); - -sub removeLine ($$); -sub appendLines ($); -sub substituteLine ($$); - -sub findMocCandidates (); -sub pruneMocCandidates ($); -sub checkMocCandidates (); -sub addMocRules (); - -sub tag_AUTOMAKE (); -sub tag_META_INCLUDES (); -sub tag_METASOURCES (); -sub tag_POFILES (); -sub tag_DOCFILES (); -sub tag_LOCALINSTALL(); -sub tag_IDLFILES(); -sub tag_UIFILES(); -sub tag_SUBDIRS(); -sub tag_ICON(); -sub tag_CLOSURE(); -sub tag_NO_UNDEFINED(); -sub tag_NMCHECK(); -sub tag_NMCHECK_GLOBAL(); -sub tag_DIST(); -sub tag_TDEINIT(); - -# Some global globals... -$verbose = 0; # a debug flag -$thisProg = "$0"; # This programs name -$topdir = cwd(); # The current directory -@makefiles = (); # Contains all the files we'll process -@foreignfiles = (); -$start = (times)[0]; # some stats for testing - comment out for release -$version = "v1.0"; -$errorflag = 0; -$cppExt = "(cpp|cc|cxx|C|c\\+\\+)"; -$hExt = "(h|H|hh|hxx|hpp|h\\+\\+)"; -$progId = "KDE tags expanded automatically by " . basename($thisProg); -$automkCall = "\n"; -$printname = ""; # used to display the directory the Makefile is in -$use_final = 1; # create code for --enable-final -$cleantarget = "clean"; -$dryrun = 0; -$pathoption = 0; -$foreign_libtool = 0; - -while (defined ($ARGV[0])) -{ - $_ = shift; - if (/^--version$/) - { - print STDOUT "\n"; - print STDOUT basename($thisProg), " $version\n", - "This is really free software, unencumbered by the GPL.\n", - "You can do anything you like with it except sueing me.\n", - "Copyright 1998 Kalle Dalheimer \n", - "Concept, design and unnecessary questions about perl\n", - " by Matthias Ettrich \n\n", - "Making it useful by Stephan Kulow and\n", - "Harri Porten \n", - "Updated (Feb-1999), John Birch \n", - "Current Maintainer Stephan Kulow\n\n"; - exit 0; - } - elsif (/^--verbose$|^-v$/) - { - $verbose = 1; # Oh is there a problem...? - } - elsif (/^-p(.+)$|^--path=(.+)$/) - { - $thisProg = "$1/".basename($thisProg) if($1); - $thisProg = "$2/".basename($thisProg) if($2); - warn ("$thisProg doesn't exist\n") if (!(-f $thisProg)); - $pathoption=1; - } - elsif (/^--help$|^-h$/) - { - print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n", - "\n", - "Patches dir/Makefile.in generated by automake\n", - "(where dir can be an absolute or relative directory name)\n", - "\n", - " -v, --verbose verbosely list files processed\n", - " -h, --help print this help, then exit\n", - " --version print version number, then exit\n", - " -p, --path= use the path to am_edit if the path\n", - " called from is not the one to be used\n", - " --no-final don't patch for --enable-final\n"; - - exit 0; - } - elsif (/^--no-final$/) - { - $use_final = 0; - $thisProg .= " --no-final"; - } - elsif (/^--foreign-libtool$/) - { - $foreign_libtool = 1; - $thisProg .= " --foreign-libtool"; - } - elsif (/^-n$/) - { - $dryrun = 1; - } - else - { - # user selects what input files to check - # add full path if relative path is given - $_ = cwd()."/".$_ if (! /^\//); - print "User wants $_\n" if ($verbose); - push (@makefiles, $_); - } -} - -if ($thisProg =~ /^\// && !$pathoption ) -{ - print STDERR "Illegal full pathname call performed...\n", - "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n", - "Please use option --path.\n"; - exit 1; -} - -# Only scan for files when the user hasn't entered data -if (!@makefiles) -{ - print STDOUT "Scanning for Makefile.in\n" if ($verbose); - find (\&add_makefile, cwd()); - #chdir('$topdir'); -} else { - print STDOUT "Using input files specified by user\n" if ($verbose); -} - -foreach $makefile (sort(@makefiles)) -{ - processMakefile ($makefile); - last if ($errorflag); -} - -# Just some debug statistics - comment out for release as it uses printf. -printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose); - -exit $errorflag; # causes make to fail if erroflag is set - -#----------------------------------------------------------------------------- - -# In conjunction with the "find" call, this builds the list of input files -sub add_makefile () -{ - push (@makefiles, $File::Find::name) if (/Makefile.in$/); -} - -#----------------------------------------------------------------------------- - -# Processes a single make file -# The parameter contains the full path name of the Makefile.in to use -sub processMakefile ($) -{ - # some useful globals for the subroutines called here - local ($makefile) = @_; - local @headerdirs = ('.'); - local $haveAutomocTag = 0; - local $MakefileData = ""; - - local $cxxsuffix = "KKK"; - - local @programs = (); # lists the names of programs and libraries - local $program = ""; - - local %realObjs = (); # lists the objects compiled into $program - local %sources = (); # lists the sources used for $program - local %finalObjs = (); # lists the objects compiled when final - local %realname = (); # the binary name of program variable - local %idlfiles = (); # lists the idl files used for $program - local %globalmocs = ();# list of all mocfiles (in %mocFiles format) - local %important = (); # list of files to be generated asap - local %uiFiles = (); - - local $allidls = ""; - local $idl_output = "";# lists all idl generated files for cleantarget - local $ui_output = "";# lists all uic generated files for cleantarget - - local %depedmocs = (); - - local $metasourceTags = 0; - local $dep_files = ""; - local $dep_finals = ""; - local %target_adds = (); # the targets to add - local $kdelang = ""; - local @cleanfiles = (); - local $cleanMoc = ""; - local $closure_output = ""; - - local %varcontent = (); - - $makefileDir = dirname($makefile); - chdir ($makefileDir); - $printname = $makefile; - $printname =~ s/^\Q$topdir\E\///; - $makefile = basename($makefile); - - print STDOUT "Processing makefile $printname\n" if ($verbose); - - # Setup and see if we need to do this. - return if (!initialise()); - - tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in - tag_META_INCLUDES (); # Supplies directories for src locations - - foreach $program (@programs) { - $sources_changed{$program} = 0; - $depedmocs{$program} = ""; - $important{$program} = ""; - tag_IDLFILES(); # Sorts out idl rules - tag_NO_UNDEFINED(); - tag_CLOSURE(); - tag_NMCHECK(); - tag_UIFILES(); # Sorts out ui rules - tag_METASOURCES (); # Sorts out the moc rules - if ($sources_changed{$program}) { - my $lookup = "$program" . '_SOURCES\s*=\s*(.*)'; - substituteLine($lookup, "$program\_SOURCES=" . $sources{$program}); - } - if ($important{$program}) { - local %source_dict = (); - for $source (split(/[\034\s]+/, $sources{$program})) { - $source_dict{$source} = 1; - } - for $source (@cleanfiles) { - $source_dict{$source} = 0; - } - for $source (keys %source_dict) { - next if (!$source); - if ($source_dict{$source}) { - # sanity check - if (! -f $source) { - print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n"; - } else { - $target_adds{"\$(srcdir)/$source"} .= $important{$program}; - } - } - } - } - } - if ($cleanMoc) { - # Always add dist clean tag - # Add extra *.moc.cpp files created for USE_AUTOMOC because they - # aren't included in the normal *.moc clean rules. - appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources "; - } - - tag_DIST() unless ($kdeopts{"noautodist"}); - - if ($idl_output) { - appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-idl "; - } - - if ($ui_output) { - appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-ui "; - } - - if ($closure_output) { - appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-closures "; - } - - if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) { - $kdelang = '$(KDE_LANG)' - } else { - $kdelang = ''; - } - - tag_POFILES (); # language rules for po directory - tag_DOCFILES (); # language rules for doc directories - tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs - tag_ICON(); - tag_SUBDIRS(); - tag_NMCHECK_GLOBAL(); - - my $tmp = "force-reedit:\n"; - $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n"; - appendLines($tmp); - - make_bcheck_target(); - make_meta_classes(); - tag_COMPILE_FIRST(); - tag_FINAL() if (!$kdeopts{"nofinal"}); - tag_TDEINIT(); - - my $final_lines = "final:\n\t\$(MAKE) "; - my $final_install_lines = "final-install:\n\t\$(MAKE) "; - my $nofinal_lines = "no-final:\n\t\$(MAKE) "; - my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) "; - - foreach $program (@programs) { - - my $lookup = "$program\_OBJECTS.*=[^\n]*"; - - my $new = ""; - - my @list = split(/[\034\s]+/, $realObjs{$program}); - - if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) { - - $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program}; - $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program}; - $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)"; - $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)"; - - $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; - $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; - $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" "; - $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" "; - } else { - $new = "$program\_OBJECTS = " . $realObjs{$program}; - } - substituteLine ($lookup, $new); - } - appendLines($final_lines . "all-am"); - appendLines($final_install_lines . "install-am"); - appendLines($nofinal_lines . "all-am"); - appendLines($nofinal_install_lines . "install-am"); - - my $lookup = '(\@\S+\@)?DEP_FILES\s*=([^\n]*)'; - if ($MakefileData =~ /\n$lookup\n/o) { - my $condition = $1; - my $depfiles = $2; - my $workfiles; - - if ($dep_finals) { - # Add the conditions on every line, since - # there may be line continuations in the list. - $workfiles = "$dep_files $dep_finals $depfiles"; - $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_TRUE\@\t/g; - $lines = "$condition\@KDE_USE_FINAL_TRUE\@DEP_FILES = $workfiles\n"; - $workfiles = "$dep_files $depfiles"; - $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_FALSE\@\t/g; - $lines .= "$condition\@KDE_USE_FINAL_FALSE\@DEP_FILES = $workfiles\n"; - } else { - $workfiles = "$dep_files $depfiles"; - $workfiles =~ s/\034/\034$condition\t/g; - $lines = $condition . "DEP_FILES = $workfiles\n"; - } - substituteLine($lookup, $lines); - } - - my $cvs_lines = "cvs-clean:\n"; - $cvs_lines .= "\t\$(MAKE) admindir=\$(top_srcdir)/admin -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n"; - appendLines($cvs_lines); - - $cvs_lines = "kde-rpo-clean:\n"; - $cvs_lines .= "\t-rm -f *.rpo\n"; - appendLines($cvs_lines); - $target_adds{"clean"} .= "kde-rpo-clean "; - - my %target_dels = ("install-data-am" => ""); - - # some strange people like to do a install-exec, and expect that also - # all modules are installed. automake doesn't know this, so we need to move - # this here from install-data to install-exec. - if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) { -# $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES "; -# don't use $target_adds here because we need to append the dependency, not -# prepend it. Fixes #44342 , when a module depends on a lib in the same dir -# and libtool needs it during relinking upon install (Simon) - my $lookup = "install-exec-am:([^\n]*)"; - if($MakefileData =~ /\n$lookup\n/) { - substituteLine("$lookup", "install-exec-am: $1 install-kde_moduleLTLIBRARIES"); - } - $target_dels{"install-data-am"} .= "install-kde_moduleLTLIBRARIES "; - $target_adds{"install-data-am"} .= " "; - } - - my $lines = ""; - - foreach $add (keys %target_adds) { - my $lookup = quotemeta($add) . ':([^\n]*)'; - if ($MakefileData =~ /\n$lookup\n/) { - my $newlines = $1; - my $oldlines = $lookup; - if (defined $target_dels{$add}) { - foreach $del (split(' ', $target_dels{$add})) { - $newlines =~ s/\s*$del\s*/ /g; - } - } - substituteLine($oldlines, "$add: " . $target_adds{$add} . $newlines); - } else { - $lines .= "$add: " . $target_adds{$add} . "\n"; - } - } - if ($lines) { - appendLines($lines); - } - - my $found = 1; - - while ($found) { - if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) { - my $stuff_before = $1; - my $stuff_after = $2; - my $lookup = quotemeta("$1\$(CXXFLAGS)$2"); - my $replacement = "$1\$(KCXXFLAGS)$2"; - $MakefileData =~ s/$lookup/$replacement/; - $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/; - $replacement = "$stuff_before\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$stuff_after"; - substituteLine($lookup, $replacement); - } else { - $found = 0; - } - } - - if($foreign_libtool == 0) { - $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))'; - - if ($MakefileData =~ m/$lookup/ ) { - $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; - } - - $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)'; - if ($MakefileData =~ m/$lookup/ ) { - $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; - } - } - - $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g; - - $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)'; - if ($MakefileData =~ m/\n$lookup\n/) { - substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2"); - } - - # Always update the Makefile.in - updateMakefile (); - return; -} - -#----------------------------------------------------------------------------- - -# Beware: This procedure is not complete. E.g. it also parses lines -# containing a '=' in rules (for instance setting shell vars). For our -# usage this us enough, though. -sub read_variables () -{ - while ($MakefileData =~ /\n\s*(\S+)\s*=([^\n]*)/g) { - $varcontent{$1} = $2; - } -} - -# Check to see whether we should process this make file. -# This is where we look for tags that we need to process. -# A small amount of initialising on the tags is also done here. -# And of course we open and/or create the needed make files. -sub initialise () -{ - if (! -r "Makefile.am") { - print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose); - return 0; - } - - # Checking for files to process... - open (FILEIN, $makefile) - || die "Could not open $makefileDir/$makefile: $!\n"; - # Read the file - # stat(FILEIN)[7] might look more elegant, but is slower as it - # requires stat'ing the file - seek(FILEIN, 0, 2); - my $fsize = tell(FILEIN); - seek(FILEIN, 0, 0); - read FILEIN, $MakefileData, $fsize; - close FILEIN; - print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d); - - # Remove the line continuations, but keep them marked - # Note: we lose the trailing spaces but that's ok. - # Don't mangle line-leading spaces (usually tabs) - # since they're important. - $MakefileData =~ s/\\\s*\n/\034/g; - - # If we've processed the file before... - restoreMakefile () if ($MakefileData =~ /$progId/); - - foreach $dir (@foreignfiles) { - if (substr($makefileDir,0,length($dir)) eq $dir) { - return 0; - } - } - - %kdeopts = (); - $kdeopts{"foreign"} = 0; - $kdeopts{"qtonly"} = 0; - $kdeopts{"noautodist"} = 0; - $kdeopts{"foreign-libtool"} = $foreign_libtool; - $kdeopts{"nofinal"} = !$use_final; # default - - read_variables(); - - if ($MakefileData =~ /\nKDE_OPTIONS\s*=\s*([^\n]*)\n/) { - my $kde_options_str = $1; - local @kde_options = split(/[\034\s]+/, $kde_options_str); - if (grep(/^foreign$/, @kde_options)) { - push(@foreignfiles, $makefileDir . "/"); - return 0; # don't touch me - } - for $opt (@kde_options) { - if (!defined $kdeopts{$opt}) { - print STDERR "Warning: unknown option $opt in $printname\n"; - } else { - $kdeopts{$opt} = 1; - } - } - } - - # Look for the tags that mean we should process this file. - $metasourceTags = 0; - $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g); - - my $pofileTag = 0; - $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g); - if ($pofileTag > 1) - { - print STDERR "Error: Only one POFILES tag allowed\n"; - $errorflag = 1; - } - - while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) { - my $suffixes_str = $1; - my @list=split(' ', $suffixes_str); - foreach $ext (@list) { - if ($ext =~ /^\.$cppExt$/) { - $cxxsuffix = $ext; - $cxxsuffix =~ s/\.//g; - print STDOUT "will use suffix $cxxsuffix\n" if ($verbose); - last; - } - } - } - - while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[\034\s]*([^\n]*)\n/g) { - - my $program = $1; - my $objs = $2; # safe them - - my $ocv = 0; - - my @objlist = split(/[\034\s]+/, $objs); - foreach $obj (@objlist) { - if ($obj =~ /(\S*)\$\((\S+)\)/ ) { - my $pre = $1; - my $variable = $2; - if ($pre eq '' && exists($varcontent{$variable})) { - my @addlist = split(/[\034\s]+/, $varcontent{$variable}); - push(@objlist, @addlist); - } elsif ($variable !~ 'OBJEXT') { - $ocv = 1; - } - } - } - - next if ($ocv); - - $program =~ s/^am_// if ($program =~ /^am_/); - - my $sourceprogram = $program; - $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/); - - print STDOUT "found program $program\n" if ($verbose); - push(@programs, $program); - - $realObjs{$program} = $objs; - - if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=\s*(.*)\n/) { - $sources{$program} = $1; - } - else { - $sources{$program} = ""; - print STDERR "found program with no _SOURCES: $program\n"; - } - - my $realprogram = $program; - $realprogram =~ s/_/./g; # unmask to regexp - if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) { - $realname{$program} = $1; - } else { - # not standard Makefile - nothing to worry about - $realname{$program} = ""; - } - } - - my $lookup = 'DEPDIR\s*=.*'; - if ($MakefileData !~ /\n($lookup)\n/o) { - $lookup = 'bindir\s*=.*'; - if ($MakefileData =~ /\n($lookup)\n/) { - substituteLine ($lookup, "DEPDIR = .deps\n$1"); - } - } - - my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES'); - foreach $mark (@marks) { - while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) { - my $clean_str = $2; - foreach $file (split('[\034\s]+', $clean_str)) { - $file =~ s/\.\///; - push(@cleanfiles, $file); - } - } - } - - my $localTag = 0; - $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/); - - return (!$errorflag); -} - -#----------------------------------------------------------------------------- - -# Gets the list of user defined directories - relative to $srcdir - where -# header files could be located. -sub tag_META_INCLUDES () -{ - my $lookup = '[^=\n]*META_INCLUDES\s*=\s*(.*)'; - return 1 if ($MakefileData !~ /($lookup)\n/o); - print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose); - - my $headerStr = $2; - removeLine ($lookup, $1); - - my @headerlist = split(/[\034\s]+/, $headerStr); - - foreach $dir (@headerlist) - { - $dir =~ s#\$\(srcdir\)#.#; - if (! -d $dir) - { - print STDERR "Warning: $dir can't be found. ", - "Must be a relative path to \$(srcdir)\n"; - } - else - { - push (@headerdirs, $dir); - } - } - - return 0; -} - -#----------------------------------------------------------------------------- - -sub tag_FINAL() -{ - my @final_names = (); - - foreach $program (@programs) { - - if ($sources{$program} =~ /\(/) { - print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose); - next; - } - - my $mocs = ""; # Moc files (in this program) - my $moc_cpp_added = 0; # If we added some .moc.cpp files, due to - # no other .cpp file including the .moc one. - - my @progsources = split(/[\034\s]+/, $sources{$program}); - my %shash = (); - @shash{@progsources} = 1; # we are only interested in the existence - my %sourcelist = (); - - foreach $source (@progsources) { - my $suffix = $source; - $suffix =~ s/^.*\.([^\.]+)$/$1/; - - $sourcelist{$suffix} .= "$source "; - } - foreach my $mocFile (keys (%globalmocs)) - { - my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); - if (defined ($cppFile)) { - $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; - } else { - $sourcelist{$cxxsuffix} .= "$mocFile.moc.$cxxsuffix "; - $moc_cpp_added = 1; - } - } - foreach $suffix (keys %sourcelist) { - - # See if this file contains c++ code. (i.e., just check the file's suffix against c++ extensions) - my $suffix_is_cxx = 0; - if($suffix =~ /($cppExt)$/) { - $cxxsuffix = $1; - $suffix_is_cxx = 1; - } - - my $mocfiles_in = ($suffix eq $cxxsuffix) && $moc_cpp_added; - - my @sourcelist = split(/[\034\s]+/, $sourcelist{$suffix}); - - if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) { - - # we support IDL on our own - if ($suffix eq "skel" || $suffix =~ /^stub/ - || $suffix =~ /^signals/ # obsolete, remove in KDE-4 - || $suffix eq "h" || $suffix eq "ui" ) { - next; - } - - foreach $file (@sourcelist) { - $file =~ s/\Q$suffix\E$//; - - $finalObjs{$program} .= $file; - if ($program =~ /_la$/) { - $finalObjs{$program} .= "lo "; - } else { - $finalObjs{$program} .= "o "; - } - } - next; # suffix - } - - my $source_deps = ""; - foreach $source (@sourcelist) { - if (-f $source) { - $source_deps .= " \$(srcdir)/$source"; - } else { - $source_deps .= " $source"; - } - } - - $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in" . $source_deps . " " . join(' ', $mocs) . "\n"; - $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n"; - $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n"; - $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n"; - $handling .= "\tfor file in " . $sourcelist{$suffix} . "; do \\\n"; - $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n"; - $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n"; - $handling .= "\tdone; \\\n"; - $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n"; - $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n"; - - appendLines($handling); - - push(@final_names, "$program.all_$suffix.$suffix"); - my $finalObj = "$program.all_$suffix."; - if ($program =~ /_la$/) { - $finalObj .= "lo"; - } else { - $finalObj .= "o"; - } - $finalObjs{$program} .= $finalObj . " "; - } - } - - if (!$kdeopts{"nofinal"} && @final_names >= 1) { - # add clean-final target - my $lines = "$cleantarget-final:\n"; - $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names); - appendLines($lines); - $target_adds{"$cleantarget-am"} .= "$cleantarget-final "; - - foreach $finalfile (@final_names) { - $finalfile =~ s/\.[^.]*$/.P/; - $dep_finals .= " \$(DEPDIR)/$finalfile"; - } - } -} - -sub tag_TDEINIT() -{ - my $lookup = 'tdeinit_LTLIBRARIES\s*=\s*(.*)'; - if ($MakefileData =~ m/\n$lookup\n/) { - my @tdeinits = split(/[\034\s]+/, $1); - my $lines = ""; - foreach $tdeinit (@tdeinits) { - if ($tdeinit =~ m/\.la$/) { - $tdeinit =~ s/\.la$//; - $lines .= "\t\@-rm -f \$(DESTDIR)\$(bindir)/$tdeinit\n"; - $lines .= "\t\@if test \"\$(BROCKENBORING)\" = \"\$(bindir)/brockenboring\"; then \\\n"; - $lines .= "\techo \$(LN_S) brockenboring \$(DESTDIR)\$(bindir)/$tdeinit ; \\\n"; - $lines .= "\t\$(LN_S) brockenboring \$(DESTDIR)\$(bindir)/$tdeinit ; else \\\n"; - $lines .= "\techo \$(LN_S) \$(BROCKENBORING) \$(DESTDIR)\$(bindir)/$tdeinit ;\\\n"; - $lines .= "\t\$(LN_S) \$(BROCKENBORING) \$(DESTDIR)\$(bindir)/$tdeinit ; fi\n"; - } - } - $target_adds{"install-exec-am"} .= "install-tdeinit-links "; - $lines = "install-tdeinit-links:\n" . - "\t\$(mkinstalldirs) \$(DESTDIR)\$(bindir)\n" . $lines; - appendLines($lines); - } -} - -#----------------------------------------------------------------------------- - -sub tag_COMPILE_FIRST() -{ - foreach $program (@programs) { - my $lookup = "$program" . '_COMPILE_FIRST\s*=\s*(.*)'; - if ($MakefileData =~ m/\n$lookup\n/) { - my $compilefirst_str = $1; - my @compilefirst = split(/[\034\s]+/, $compilefirst_str); - my @progsources = split(/[\034\s]+/, $sources{$program}); - my %donesources = (); - $handling = ""; - foreach $source (@progsources) { - my @deps = (); - my $sdeps = ""; - if (-f $source) { - $sdeps = "\$(srcdir)/$source"; - } else { - $sdeps = "$source"; - } - foreach $depend (@compilefirst) { - next if ($source eq $depend); - # avoid cyclic dependencies - next if defined($donesources{$depend}); - push @deps, $depend; - } - $handling .= "$sdeps: " . join(' ', @deps) . "\n" if (@deps); - $donesources{$source} = 1; - } - appendLines($handling) if (length($handling)); - } - } -} - -#----------------------------------------------------------------------------- - - -# Organises the list of headers that we'll use to produce moc files -# from. -sub tag_METASOURCES () -{ - local @newObs = (); # here we add to create object files - local @deped = (); # here we add to create moc files - local $mocExt = ".moc"; - local %mocFiles = (); - - my $line = ""; - my $postEqual = ""; - - my $lookup; - my $found = ""; -#print "$program: tag_METASOURCES\n"; - if ($metasourceTags > 1) { - $lookup = $program . '_METASOURCES\s*=\s*(.*)'; - return 1 if ($MakefileData !~ /\n($lookup)\n/); - $found = $1; - } else { - $lookup = $program . '_METASOURCES\s*=\s*(.*)'; - if ($MakefileData !~ /\n($lookup)\n/) { - $lookup = 'METASOURCES\s*=\s*(.*)'; - return 1 if ($MakefileData !~ /\n($lookup)\n/o); - $found = $1; - $metasourceTags = 0; # we can use the general target only once - } else { - $found = $1; - } - } - print STDOUT "METASOURCE processing <$found>)\n" if ($verbose); - - $postEqual = $found; - $postEqual =~ s/[^=]*=//; - - removeLine ($lookup, $found); - - # Always find the header files that could be used to "moc" - return 1 if (findMocCandidates ()); - - if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/) - { - print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+); - $mocExt = ".moc.$cxxsuffix"; - $haveAutomocTag = 1; - } - else - { - # Not automoc so read the list of files supplied which - # should be .moc files. - - $postEqual =~ tr/\034/ /; - - # prune out extra headers - This also checks to make sure that - # the list is valid. - pruneMocCandidates ($postEqual); - } - - checkMocCandidates (); - - if (@newObs) { - my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o "; - $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext; - $depedmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix"; - foreach $file (@newObs) { - $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/); - } - } - if (@deped) { - $depedmocs{$program} .= " "; - $depedmocs{$program} .= join('.moc ', @deped) . ".moc"; - $depedmocs{$program} .= " "; - } - addMocRules (); - @globalmocs{keys %mocFiles}=values %mocFiles; -} - -#----------------------------------------------------------------------------- - -# Returns 0 if the line was processed - 1 otherwise. -# Errors are logged in the global $errorflags -sub tag_AUTOMAKE () -{ - my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\)(.*)'; - return 1 if ($MakefileData !~ /\n($lookup)\n/); - print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose); - - my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname"; - substituteLine ($lookup, $newLine); - $automkCall = $1; - - $lookup = '.*cd \$\(srcdir\)\s+&&[\034\s]+\$\(AUTOCONF\)(.*)'; - if ($MakefileData =~ /\n($lookup)\n/) { - $newLine = "\tcd \$(srcdir) && rm -f configure && \$(MAKE) -f admin/Makefile.common configure"; - substituteLine ($lookup, $newLine); - } - - return 0; -} - -#----------------------------------------------------------------------------- - -sub handle_TOPLEVEL() -{ - my $pofiles = ""; - my @restfiles = (); - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if (-d $entry); - - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/); - - if ($entry =~ /\.po$/) { - next; - } - push(@restfiles, $entry); - } - closedir (THISDIR); - - if (@restfiles) { - $target_adds{"install-data-am"} .= "install-nls-files "; - $lines = "install-nls-files:\n"; - $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n"; - for $file (@restfiles) { - $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; - } - $target_adds{"uninstall"} .= "uninstall-nls-files "; - $lines .= "uninstall-nls-files:\n"; - for $file (@restfiles) { - $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; - } - appendLines($lines); - } - - return 0; -} - -#----------------------------------------------------------------------------- - -sub tag_SUBDIRS () -{ - if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) { - return 1; - } - - my $subdirs = "."; - - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./); - if (-d $entry && -f $entry . "/Makefile.am") { - $subdirs .= " $entry"; - next; - } - } - closedir (THISDIR); - - my $lines = "SUBDIRS =$subdirs\n"; - substituteLine('SUBDIRS\s*=.*', $lines); - return 0; -} - -sub tag_IDLFILES () -{ - my @psources = split(/[\034\s]+/, $sources{$program}); - my $dep_lines = ""; - my @cppFiles = (); - - foreach $source (@psources) { - - my $skel = ($source =~ m/\.skel$/); - my $stub = ($source =~ m/\.stub$/); - my $signals = ($source =~ m/\.signals$/); # obsolete, remove in KDE-4 - - if ($stub || $skel || $signals) { - - my $qs = quotemeta($source); - $sources{$program} =~ s/$qs//; - $sources_changed{$program} = 1; - - print STDOUT "adding IDL file $source\n" if ($verbose); - - $source =~ s/\.(stub|skel|signals)$//; - - my $sourcename; - - if ($skel) { - $sourcename = "$source\_skel"; - } elsif ($stub) { - $sourcename = "$source\_stub"; - } else { - $sourcename = "$source\_signals"; - } - - my $sourcedir = ''; - if (-f "$makefileDir/$source.h") { - $sourcedir = '$(srcdir)/'; - } else { - if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) { - $sourcedir = $1; - $sourcedir .= "/" if ($sourcedir !~ /\/$/); - } - } - - if ($allidls !~ /$source\_kidl/) { - - $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOP_DEPENDENCIES)\n"; - $dep_lines .= "\t\$(DCOPIDL) $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; false )\n"; - - $allidls .= $source . "_kidl "; - } - - if ($allidls !~ /$sourcename/) { - - $dep_lines_tmp = ""; - - if ($skel) { - $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n"; - $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n"; - } elsif ($stub) { - $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n"; - } else { # signals - obsolete, remove in KDE 4 - $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n"; - } - - if ($stub || $signals) { - $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h "; - $dep_lines .= "$sourcename.h: $source.kidl\n"; - $dep_lines .= $dep_lines_tmp; - } - - $allidls .= $sourcename . " "; - } - - $idlfiles{$program} .= $sourcename . " "; - - if ($program =~ /_la$/) { - $realObjs{$program} .= " $sourcename.lo"; - } else { - $realObjs{$program} .= " $sourcename.\$(OBJEXT)"; - } - $sources{$program} .= " $sourcename.$cxxsuffix"; - $sources_changed{$program} = 1; - $important{$program} .= "$sourcename.h " if (!$skel); - $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl "; - push(@cleanfiles, "$sourcename.$cxxsuffix"); - push(@cleanfiles, "$sourcename.h"); - push(@cleanfiles, "$sourcename.kidl"); - $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/); - } - } - if ($dep_lines) { - appendLines($dep_lines); - } - - if (0) { - my $lookup = "($program)"; - $lookup .= '(|\$\(EXEEXT\))'; - $lookup =~ s/\_/./g; - $lookup .= ":(.*..$program\_OBJECTS..*)"; - # $lookup = quotemeta($lookup); - if ($MakefileData =~ /\n$lookup\n/) { - - my $line = "$1$2: "; - foreach $file (split(' ', $idlfiles{$program})) { - $line .= "$file.$cxxsuffix "; - } - $line .= $3; - substituteLine($lookup, $line); - } else { - print STDERR "no built dependency found $lookup\n"; - } - } -} - -sub tag_UIFILES () -{ - my @psources = split(/[\034\s]+/, $sources{$program}); - my $dep_lines = ""; - my @depFiles = (); - - foreach $source (@psources) { - - if ($source =~ m/\.ui$/) { - - print STDERR "adding UI file $source\n" if ($verbose); - - my $qs = quotemeta($source); - $sources{$program} =~ s/$qs//; - $sources_changed{$program} = 1; - - $source =~ s/\.ui$//; - - my $sourcedir = ''; - if (-f "$makefileDir/$source.ui") { - $sourcedir = '$(srcdir)/'; - } - - if (!$uiFiles{$source}) { - - $dep_lines .= "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n"; - $dep_lines .= "\trm -f $source.$cxxsuffix\n"; - if (!$kdeopts{"qtonly"}) { - $dep_lines .= "\techo '#include ' > $source.$cxxsuffix\n"; - my ($mangled_source) = $source; - $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage - $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n"; - $dep_lines .= "\tsed -e \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | sed -e \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | sed -e \"s,image\\([0-9][0-9]*\\)_data,img\\1_" . $mangled_source . ",g\" >> $source.$cxxsuffix ;\\\n"; - $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n"; - } else { - $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n"; - } - $dep_lines .= "\tif test \"\$\$ret\" = 0; then echo '#include \"$source.moc\"' >> $source.$cxxsuffix; else rm -f $source.$cxxsuffix ; exit \$\$ret ; fi\n\n"; - $dep_lines .= "$source.h: $sourcedir$source.ui\n"; - $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n\n"; - $dep_lines .= "$source.moc: $source.h\n"; - $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n"; - - $uiFiles{$source} = 1; - $depedmocs{$program} .= " $source.moc"; - $globalmocs{$source} = "\035$source.h\035$source.cpp"; - } - - if ($program =~ /_la$/) { - $realObjs{$program} .= " $source.lo"; - } else { - $realObjs{$program} .= " $source.\$(OBJEXT)"; - } - $sources{$program} .= " $source.$cxxsuffix"; - $sources_changed{$program} = 1; - $important{$program} .= "$source.h "; - $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc "; - push(@cleanfiles, "$source.$cxxsuffix"); - push(@cleanfiles, "source.h"); - push(@cleanfiles, "$source.moc"); - $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); - } - } - if ($dep_lines) { - appendLines($dep_lines); - } -} - -sub tag_ICON() -{ - my $lookup = '([^\s]*)_ICON\s*=\s*([^\n]*)'; - my $install = ""; - my $uninstall = ""; - - while ($MakefileData =~ /\n$lookup/og) { - my $destdir; - if ($1 eq "KDE") { - $destdir = "kde_icondir"; - } else { - $destdir = $1 . "dir"; - } - my $iconauto = ($2 =~ /AUTO\s*$/); - my @appnames = (); - if ( ! $iconauto ) { - my $appicon_str = $2; - my @_appnames = split(" ", $appicon_str); - print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose); - foreach $appname (@_appnames) { - push(@appnames, quotemeta($appname)); - } - } else { - print STDOUT "KDE_ICON processing \n" if ($verbose); - } - - my @files = (); - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); - next if (! -f $entry); - if ( $iconauto ) - { - push(@files, $entry) - if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/ || $entry =~ /\.svg/); - } else { - foreach $appname (@appnames) { - push(@files, $entry) - if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/ || $entry =~ /-$appname\.svg/); - } - } - } - closedir (THISDIR); - - my %directories = (); - - foreach $file (@files) { - my $newfile = $file; - my $prefix = $file; - $prefix =~ s/\.(png|xpm|mng|svg|svgz)$//; - my $appname = $prefix; - $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; - $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; - $appname = quotemeta($appname); - $prefix =~ s/$appname$//; - $prefix =~ s/-$//; - - $prefix = 'lo16-app' if ($prefix eq 'mini'); - $prefix = 'lo32-app' if ($prefix eq 'lo'); - $prefix = 'hi48-app' if ($prefix eq 'large'); - $prefix .= '-app' if ($prefix =~ m/^...$/); - - my $type = $prefix; - $type =~ s/^.*-([^-]+)$/$1/; - $prefix =~ s/^(.*)-[^-]+$/$1/; - - my %type_hash = - ( - 'action' => 'actions', - 'app' => 'apps', - 'device' => 'devices', - 'filesys' => 'filesystems', - 'mime' => 'mimetypes' - ); - - if (! defined $type_hash{$type} ) { - print STDERR "unknown icon type $type in $printname ($file)\n"; - next; - } - - my %dir_hash = - ( - 'los' => 'locolor/16x16', - 'lom' => 'locolor/32x32', - 'him' => 'hicolor/32x32', - 'hil' => 'hicolor/48x48', - 'lo16' => 'locolor/16x16', - 'lo22' => 'locolor/22x22', - 'lo32' => 'locolor/32x32', - 'hi16' => 'hicolor/16x16', - 'hi22' => 'hicolor/22x22', - 'hi32' => 'hicolor/32x32', - 'hi48' => 'hicolor/48x48', - 'hi64' => 'hicolor/64x64', - 'hi128' => 'hicolor/128x128', - 'hisc' => 'hicolor/scalable', - 'cr16' => 'crystalsvg/16x16', - 'cr22' => 'crystalsvg/22x22', - 'cr32' => 'crystalsvg/32x32', - 'cr48' => 'crystalsvg/48x48', - 'cr64' => 'crystalsvg/64x64', - 'cr128' => 'crystalsvg/128x128', - 'crsc' => 'crystalsvg/scalable' - ); - - $newfile =~ s@.*-($appname\.(png|xpm|mng|svgz|svg?))@$1@; - - if (! defined $dir_hash{$prefix}) { - print STDERR "unknown icon prefix $prefix in $printname\n"; - next; - } - - my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type}; - if ($newfile =~ /-[^\.]/) { - my $tmp = $newfile; - $tmp =~ s/^([^-]+)-.*$/$1/; - $dir = $dir . "/" . $tmp; - $newfile =~ s/^[^-]+-//; - } - - if (!defined $directories{$dir}) { - $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n"; - $directories{$dir} = 1; - } - - $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; - $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; - - } - } - - if (length($install)) { - $target_adds{"install-data-am"} .= "install-kde-icons "; - $target_adds{"uninstall-am"} .= "uninstall-kde-icons "; - appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall); - } -} - -sub handle_POFILES($$) -{ - my @pofiles = split(" ", $_[0]); - my $lang = $_[1]; - - # Build rules for creating the gmo files - my $tmp = ""; - my $allgmofiles = ""; - my $pofileLine = "POFILES ="; - foreach $pofile (@pofiles) - { - $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension - $tmp .= "$1.gmo: $pofile\n"; - $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n"; - $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n"; - $allgmofiles .= " $1.gmo"; - $pofileLine .= " $1.po"; - } - appendLines ($tmp); - my $lookup = 'POFILES\s*=([^\n]*)'; - if ($MakefileData !~ /\n$lookup/o) { - appendLines("$pofileLine\nGMOFILES =$allgmofiles"); - } else { - substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles"); - } - - if ($allgmofiles) { - - # Add the "clean" rule so that the maintainer-clean does something - appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n"); - - $target_adds{"maintainer-clean"} .= "clean-nls "; - - $lookup = 'DISTFILES\s*=\s*(.*)'; - if ($MakefileData =~ /\n$lookup\n/o) { - $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1"; - substituteLine ($lookup, $tmp); - } - } - - $target_adds{"install-data-am"} .= "install-nls "; - - $tmp = "install-nls:\n"; - if ($lang) { - $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n"; - } - $tmp .= "\t\@for base in "; - foreach $pofile (@pofiles) - { - $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension - $tmp .= "$1 "; - } - - $tmp .= "; do \\\n"; - if ($lang) { - $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; - $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; - $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; - $tmp .= "\t fi ;\\\n"; - } else { - $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; - $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n"; - $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; - $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; - $tmp .= "\t fi ;\\\n"; - } - $tmp .= "\tdone\n\n"; - appendLines ($tmp); - - $target_adds{"uninstall"} .= "uninstall-nls "; - - $tmp = "uninstall-nls:\n"; - foreach $pofile (@pofiles) - { - $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension - if ($lang) { - $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n"; - } else { - $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n"; - } - } - appendLines($tmp); - - $target_adds{"all"} .= "all-nls "; - - $tmp = "all-nls: \$(GMOFILES)\n"; - - appendLines($tmp); - - $target_adds{"distdir"} .= "distdir-nls "; - - $tmp = "distdir-nls:\$(GMOFILES)\n"; - $tmp .= "\tfor file in \$(POFILES); do \\\n"; - $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; - $tmp .= "\tdone\n"; - $tmp .= "\tfor file in \$(GMOFILES); do \\\n"; - $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; - $tmp .= "\tdone\n"; - - appendLines ($tmp); - - if (!$lang) { - appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n"); - } - -} - -#----------------------------------------------------------------------------- - -# Returns 0 if the line was processed - 1 otherwise. -# Errors are logged in the global $errorflags -sub tag_POFILES () -{ - my $lookup = 'POFILES\s*=([^\n]*)'; - return 1 if ($MakefileData !~ /\n$lookup/o); - print STDOUT "POFILES processing <$1>\n" if ($verbose); - - my $tmp = $1; - - # make sure these are all gone. - if ($MakefileData =~ /\n\.po\.gmo:\n/) - { - print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n"; - return 1; - } - - # Either find the pofiles in the directory (AUTO) or use - # only the specified po files. - my $pofiles = ""; - if ($tmp =~ /^\s*AUTO\s*$/) - { - opendir (THISDIR, "."); - $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR))); - closedir (THISDIR); - print STDOUT "pofiles found = $pofiles\n" if ($verbose); - if (-f "charset" && -f "tdelibs.po") { - handle_TOPLEVEL(); - } - } - else - { - $tmp =~ s/\034/ /g; - $pofiles = $tmp; - } - return 1 if (!$pofiles); # Nothing to do - - handle_POFILES($pofiles, $kdelang); - - return 0; -} - -sub helper_LOCALINSTALL($) -{ - my $lookup = "\035" . $_[0] . " *:[^\035]*\035\t"; - my $copy = $MakefileData; - $copy =~ s/\n/\035/g; - if ($copy =~ /($lookup.*)$/) { - - $install = $1; - $install =~ s/\035$_[0] *:[^\035]*\035//; - my $emptyline = 0; - while (! $emptyline ) { - if ($install =~ /([^\035]*)\035(.*)/) { - local $line = $1; - $install = $2; - if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) { - $emptyline = 1; - } else { - replaceDestDir($line); - } - } else { - $emptyline = 1; - } - } - } - -} - -sub tag_LOCALINSTALL () -{ - helper_LOCALINSTALL('install-exec-local'); - helper_LOCALINSTALL('install-data-local'); - helper_LOCALINSTALL('uninstall-local'); - - return 0; -} - -sub replaceDestDir($) { - local $line = $_[0]; - - if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/ - || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/ - || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/) - { - $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/); - } - - if ($line ne $_[0]) { - $_[0] = quotemeta $_[0]; - substituteLine($_[0], $line); - } -} - -#--------------------------------------------------------------------------- -# libtool is very hard to persuade it could use -Wl,--no-undefined for making -# -no-undefined actually work -# append $(KDE_NO_UNFINED) after every -no-undefined in LDFLAGS -# this may go away if libtool ever does this on its own -sub tag_NO_UNDEFINED () { - return if ($program !~ /_la$/); - - my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; - $MakefileData =~ m/$lookup/; - return if ($1 !~ /CXXLINK/); - - if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ ) { - return; - } - - $lookup = $program . '\_LDFLAGS(\s*)=(.*)-no-undefined(.*)'; - if ($MakefileData =~ /\n$lookup\n/) { - my $replace = $program . "\_LDFLAGS$1=$2-no-undefined \$(KDE_NO_UNDEFINED)$3"; - substituteLine($lookup, $replace); - } -} - -sub tag_CLOSURE () { - return if ($program !~ /_la$/); - - my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; - $MakefileData =~ m/$lookup/; - return if ($1 !~ /CXXLINK/); - - if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ && - $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) { - print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun); - return; - } - - my $closure = $realname{$program} . ".closure"; - my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n"; - $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n"; - $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n"; - $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n"; - $lines .= "\t\@rm -f $program\_closure.* $closure\n"; - $lines .= "\t\@echo \"timestamp\" > $closure\n"; - $lines .= "\n"; - appendLines($lines); - $lookup = $realname{$program} . ": (.*)"; - if ($MakefileData =~ /\n$lookup\n/) { - $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1"; - $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1"; - substituteLine($lookup, $lines); - } - $closure_output .= " $closure"; -} - -sub tag_NMCHECK () { - return if ($program !~ /_la$/); - my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; - $MakefileData =~ m/$lookup/; - my $linkcmd = $1; - return if ($linkcmd !~ /CXXLINK/ && $linkcmd !~ /LINK/); - - $lookup = $program . '_NMCHECK\s*=([^\n]*)'; - if( $MakefileData !~ m/\n$lookup\n/ ) { - return; - } - my $allowed = $1; - $allowed =~ s/^ *//; - $lookup = $program . '_NMCHECKWEAK\s*=([^\n]*)'; - my $weak = ""; - my $is_weak = 0; - if( $MakefileData =~ m/\n$lookup\n/ ) { - $weak = $1; - $is_weak = 1; - } - $weak =~ s/^ *//; - - if( $is_weak ) - { - $weak = '--allowweak=\'' . $weak . '\' '; - } - my $nmline = "\@KDE_USE_NMCHECK_TRUE@\t\@\$(MAKE) \$(AM_MAKEFLAGS) nmcheck_$realname{$program} || ( rm -f $realname{$program}; exit 1 )"; - $lookup = '(\t\$\(CXXLINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; - if( $MakefileData =~ /\n$lookup\n/ ) { - my $oldstuff = $1; - substituteLine( $lookup, $oldstuff . "\n" . $nmline ); - } - $lookup = '(\t\$\(LINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; - if( $MakefileData =~ /\n$lookup\n/ ) { - my $oldstuff = $1; - substituteLine( $lookup, $oldstuff . "\n" . $nmline ); - } - $nmline = "\@\$(top_srcdir)/admin/nmcheck $realname{$program} \'$allowed\' $weak"; - appendLines( "\nnmcheck_$realname{$program}: $realname{$program} \n\t$nmline\n" ); - $target_adds{ "nmcheck" } .= "nmcheck_$realname{$program} "; -} - -sub tag_NMCHECK_GLOBAL() { - $target_adds{ "nmcheck" } .= ""; # always create nmcheck target - $target_adds{ "nmcheck-am" } .= "nmcheck"; - my $lookup = 'RECURSIVE_TARGETS\s*=\s*(.*)'; - if ($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive"); - } -} - -sub tag_DIST () { - my %foundfiles = (); - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry eq "Makefile" || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); - next if (! -f $entry); - next if ($entry =~ /\.moc/ || $entry =~ /\.moc.$cppExt$/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/); - next if ($entry =~ /\.all_$cppExt\.$cppExt$/); - $foundfiles{$entry} = 1; - } - closedir (THISDIR); - - # doing this for MAINTAINERCLEANFILES would be wrong - my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS'); - foreach $mark (@marks) { - while ($MakefileData =~ /\n($mark)\s*=\s*([^\n]*)/g) { - my $cleanfiles_str = $2; - foreach $file (split('[\034\s]+', $cleanfiles_str)) { - $file =~ s/\.\///; - $foundfiles{$file} = 0 if (defined $foundfiles{$file}); - } - } - } - my @files = ("Makefile", "config.cache", "config.log", "stamp-h", - "stamp-h1", "stamp-h1", "config.h", "Makefile", - "config.status", "config.h", "libtool", "core" ); - foreach $file (@files) { - $foundfiles{$file} = 0 if (defined $foundfiles{$file}); - } - - my $KDE_DIST = ""; - foreach $file (keys %foundfiles) { - if ($foundfiles{$file} == 1) { - $KDE_DIST .= "$file "; - } - } - if ($KDE_DIST) { - print "KDE_DIST $printname $KDE_DIST\n" if ($verbose); - - my $lookup = "DISTFILES *=(.*)"; - if ($MakefileData =~ /\n$lookup\n/o) { - substituteLine($lookup, "KDE_DIST=$KDE_DIST\n\nDISTFILES=$1 \$(KDE_DIST)\n"); - } - } -} - -#----------------------------------------------------------------------------- -# Returns 0 if the line was processed - 1 otherwise. -# Errors are logged in the global $errorflags -sub tag_DOCFILES () -{ - $target_adds{"all"} .= "docs-am "; - - my $lookup = 'KDE_DOCS\s*=\s*([^\n]*)'; - goto nodocs if ($MakefileData !~ /\n$lookup/o); - print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose); - - my $tmp = $1; - - # Either find the files in the directory (AUTO) or use - # only the specified po files. - my $files = ""; - my $appname = $tmp; - $appname =~ s/^(\S*)\s*.*$/$1/; - if ($appname =~ /AUTO/) { - $appname = basename($makefileDir); - if ("$appname" eq "en") { - print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n"; - exit(1); - } - } - - if ($tmp !~ / - /) - { - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry eq "core" || $entry eq "index.cache.bz2"); - next if (! -f $entry); - $files .= "$entry "; - } - closedir (THISDIR); - print STDOUT "docfiles found = $files\n" if ($verbose); - } - else - { - $tmp =~ s/\034/ /g; - $tmp =~ s/^\S*\s*-\s*//; - $files = $tmp; - } - goto nodocs if (!$files); # Nothing to do - - if ($files =~ /(^| )index\.docbook($| )/) { - - my $lines = ""; - my $lookup = 'MEINPROC\s*='; - if ($MakefileData !~ /\n($lookup)/) { - $lines = "MEINPROC=/\$(kde_bindir)/meinproc\n"; - } - $lookup = 'KDE_XSL_STYLESHEET\s*='; - if ($MakefileData !~ /\n($lookup)/) { - $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n"; - } - $lookup = '\nindex.cache.bz2:'; - if ($MakefileData !~ /\n($lookup)/) { - $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n"; - $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n"; - $lines .= "\n"; - } - - $lines .= "docs-am: index.cache.bz2\n"; - $lines .= "\n"; - $lines .= "install-docs: docs-am install-nls\n"; - $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; - $lines .= "\t\@if test -f index.cache.bz2; then \\\n"; - $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\telif test -f \$(srcdir)/index.cache.bz2; then \\\n"; - $lines .= "\techo \$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\t\$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\tfi\n"; - $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; - $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; - - $lines .= "\n"; - $lines .= "uninstall-docs:\n"; - $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n"; - $lines .= "\n"; - $lines .= "clean-docs:\n"; - $lines .= "\t-rm -f index.cache.bz2\n"; - $lines .= "\n"; - $target_adds{"install-data-am"} .= "install-docs "; - $target_adds{"uninstall"} .= "uninstall-docs "; - $target_adds{"clean-am"} .= "clean-docs "; - appendLines ($lines); - } else { - appendLines("docs-am: $files\n"); - } - - $target_adds{"install-data-am"} .= "install-nls "; - $target_adds{"uninstall"} .= "uninstall-nls "; - - $tmp = "install-nls:\n"; - $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; - $tmp .= "\t\@for base in $files; do \\\n"; - $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; - $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; - $tmp .= "\tdone\n"; - if ($appname eq 'common') { - $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n"; - $tmp .= "\tif test ! -f \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n"; - $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n"; - $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n"; - $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n"; - $tmp .= "\t case \" $files \" in \\\n"; - $tmp .= "\t *\" \$\$p \"*) ;; \\\n"; - $tmp .= "\t *) test ! -f \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n"; - $tmp .= "\t esac ; \\\n"; - $tmp .= "\tdone ; fi ; true\n"; - } - $tmp .= "\n"; - $tmp .= "uninstall-nls:\n"; - $tmp .= "\tfor base in $files; do \\\n"; - $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; - $tmp .= "\tdone\n\n"; - appendLines ($tmp); - - $target_adds{"distdir"} .= "distdir-nls "; - - $tmp = "distdir-nls:\n"; - $tmp .= "\tfor file in $files; do \\\n"; - $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; - $tmp .= "\tdone\n"; - - appendLines ($tmp); - - return 0; - - nodocs: - appendLines("docs-am:\n"); - return 1; -} - -#----------------------------------------------------------------------------- -# Find headers in any of the source directories specified previously, that -# are candidates for "moc-ing". -sub findMocCandidates () -{ - foreach $dir (@headerdirs) - { - my @list = (); - opendir (SRCDIR, "$dir"); - @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR); - closedir SRCDIR; - foreach $hf (@hFiles) - { - next if ($hf =~ /^\.\#/); - $hf =~ /(.*)\.[^\.]*$/; # Find name minus extension - next if ($uiFiles{$1}); - open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n"; - my $hfsize = 0; - seek(HFIN, 0, 2); - $hfsize = tell(HFIN); - seek(HFIN, 0, 0); - read HFIN, $hfData, $hfsize; - close HFIN; - # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT - # handle " { friend class blah; Q_OBJECT ", but don't match antlarr_Q_OBJECT (\b). - if ( $hfData =~ /{([^}]*)\bQ_OBJECT/s ) { - push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s; ## reject "// Q_OBJECT" - } - } - # The assoc array of root of headerfile and header filename - foreach $hFile (@list) - { - $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension - if ($mocFiles{$1}) - { - print STDERR "Warning: Multiple header files found for $1\n"; - next; # Use the first one - } - $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir - } - } - - return 0; -} - -#----------------------------------------------------------------------------- - -# The programmer has specified a moc list. Prune out the moc candidates -# list that we found based on looking at the header files. This generates -# a warning if the programmer gets the list wrong, but this doesn't have -# to be fatal here. -sub pruneMocCandidates ($) -{ - my %prunedMoc = (); - local @mocList = split(' ', $_[0]); - - foreach $mocname (@mocList) - { - $mocname =~ s/\.moc$//; - if ($mocFiles{$mocname}) - { - $prunedMoc{$mocname} = $mocFiles{$mocname}; - } - else - { - my $print = $makefileDir; - $print =~ s/^\Q$topdir\E\\//; - # They specified a moc file but we can't find a header that - # will generate this moc file. That's possible fatal! - print STDERR "Warning: No moc-able header file for $print/$mocname\n"; - } - } - - undef %mocFiles; - %mocFiles = %prunedMoc; -} - -#----------------------------------------------------------------------------- - -# Finds the cpp files (If they exist). -# The cpp files get appended to the header file separated by \035 -sub checkMocCandidates () -{ - my @cppFiles; - my $cpp2moc; # which c++ file includes which .moc files - my $moc2cpp; # which moc file is included by which c++ files - - return unless (keys %mocFiles); - opendir(THISDIR, ".") || return; - @cppFiles = grep { /.+\.$cppExt$/o && !/.+\.moc\.$cppExt$/o - && !/.+\.all_$cppExt\.$cppExt$/o - && !/^\./ } readdir(THISDIR); - closedir THISDIR; - return unless (@cppFiles); - my $files = join (" ", @cppFiles); - $cpp2moc = {}; - $moc2cpp = {}; - foreach $cxxf (@cppFiles) - { - open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n"; - seek(CXXFIN, 0, 2); - my $cxxfsize = tell(CXXFIN); - seek(CXXFIN, 0, 0); - read CXXFIN, $cxxfData, $cxxfsize; - close CXXFIN; - while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) { - $cpp2moc->{$cxxf}->{$1} = 1; - $moc2cpp->{$1}->{$cxxf} = 1; - } - } - foreach my $mocFile (keys (%mocFiles)) - { - @cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}}; - if (@cppFiles == 1) { - $mocFiles{$mocFile} .= "\035" . $cppFiles[0]; - push(@deped, $mocFile); - } elsif (@cppFiles == 0) { - push (@newObs, $mocFile); # Produce new object file - next if ($haveAutomocTag); # This is expected... - # But this is an error we can deal with - let them know - print STDERR - "Warning: No c++ file that includes $mocFile.moc\n"; - } else { - # We can't decide which file to use, so it's fatal. Although as a - # guess we could use the mocFile.cpp file if it's in the list??? - print STDERR - "Error: Multiple c++ files that include $mocFile.moc\n"; - print STDERR "\t",join ("\t", @cppFiles),"\n"; - $errorflag = 1; - delete $mocFiles{$mocFile}; - # Let's continue and see what happens - They have been told! - } - } -} - -#----------------------------------------------------------------------------- - -# Add the rules for generating moc source from header files -# For Automoc output *.moc.cpp but normally we'll output *.moc -# (We must compile *.moc.cpp separately. *.moc files are included -# in the appropriate *.cpp file by the programmer) -sub addMocRules () -{ - my $cppFile; - my $hFile; - - foreach $mocFile (keys (%mocFiles)) - { - undef $cppFile; - ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3); - $dir =~ s#^\.#\$(srcdir)#; - if (defined ($cppFile)) - { - $cppFile =~ s,\.[^.]*$,,; - $target_adds{"$cppFile.o"} .= "$mocFile.moc "; - $target_adds{"$cppFile.lo"} .= "$mocFile.moc "; - appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n"); - $cleanMoc .= " $mocFile.moc"; - appendLines ("mocs: $mocFile.moc"); - } - else - { - appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n"); - $cleanMoc .= " $mocFile$mocExt"; - appendLines ("mocs: $mocFile$mocExt"); - } - } -} - -sub make_bcheck_target() -{ - my $lookup = 'RECURSIVE_TARGETS\s*=\s*(.*)'; - my $bcheckdep = "bcheck-am"; - if ($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "RECURSIVE_TARGETS = $1 bcheck-recursive"); - $bcheckdep = "bcheck-recursive"; - } - - my $headers= ""; - $headers = $1 if($MakefileData =~ /\nHEADERS\s*=\s*(.+)/); - $headers =~ s/\$\((?:noinst|EXTRA)_HEADERS\)//g; - - $target_adds{"clean-am"} .= "clean-bcheck "; - - my $t = "clean-bcheck: \n" . - "\trm -f *.bchecktest.cc *.bchecktest.cc.class\n\n" . - "bcheck: $bcheckdep\n\n" . - "bcheck-am:\n" . - "\t\@for i in $headers; do \\\n" . - "\t if test \$(srcdir)/\$\$i -nt \$\$i.bchecktest.cc; then \\\n" . - "\t echo \"int main() {return 0;}\" > \$\$i.bchecktest.cc ; \\\n" . - "\t echo \"#include \\\"\$\$i\\\"\" >> \$\$i.bchecktest.cc ; \\\n" . - "\t echo \"\$\$i\"; \\\n" . - "\t if ! "; - $t .= $cxxsuffix eq "KKK" ? - "\$(CXX) \$(DEFS) -I. -I\$(srcdir) -I\$(top_builddir) \$(INCLUDES) \$(AM_CPPFLAGS) \$(CPPFLAGS) \$(KDE_CXXFLAGS) " : - "\$(CXXCOMPILE) "; - $t .= " --dump-class-hierarchy \$\$i.bchecktest.cc; then \\\n" . - "\t rm -f \$\$i.bchecktest.cc; exit 1; \\\n" . - "\t fi ; \\\n" . - "\t echo \"\" >> \$\$i.bchecktest.cc.class; \\\n" . - "\t perl \$(top_srcdir)/admin/bcheck.pl \$\$i.bchecktest.cc.class || { rm -f \$\$i.bchecktest.cc; exit 1; }; \\\n" . - "\t fi ; \\\n" . - "\tdone\n"; - appendLines("$t\n"); -} - -sub make_meta_classes () -{ - return if ($kdeopts{"qtonly"}); - - my $cppFile; - my $hFile; - my $moc_class_headers = ""; - foreach $program (@programs) { - my $mocs = ""; - my @progsources = split(/[\034\s]+/, $sources{$program}); - my @depmocs = split(' ', $depedmocs{$program}); - my %shash = (), %mhash = (); - @shash{@progsources} = 1; # we are only interested in the existence - @mhash{@depmocs} = 1; - - print STDOUT "program=$program\n" if ($verbose); - print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose); - print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose); - print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose); - foreach my $mocFile (keys (%globalmocs)) - { - my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); - if (defined ($cppFile)) - { - $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; - } - else - { - # Bah. This is the case, if no C++ file includes the .moc - # file. We make a .moc.cpp file for that. Unfortunately this - # is not included in the %sources hash, but rather is mentioned - # in %depedmocs. If the user wants to use AUTO he can't just - # use an unspecific METAINCLUDES. Instead he must use - # program_METAINCLUDES. Anyway, it's not working real nicely. - # E.g. Its not clear what happens if user specifies two - # METAINCLUDES=AUTO in the same Makefile.am. - $mocs .= " $mocFile.moc.$cxxsuffix" - if exists $mhash{$mocFile.".moc.$cxxsuffix"}; - } - } - if ($mocs) { - print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose); - } - print STDOUT "\n" if $verbose; - } - if ($moc_class_headers) { - appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes "; - } -} - -#----------------------------------------------------------------------------- - -sub updateMakefile () -{ - return if ($dryrun); - - open (FILEOUT, "> $makefile") - || die "Could not create $makefile: $!\n"; - - $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines - # Append our $progId line, _below_ the "generated by automake" line - # because automake-1.6 relies on the first line to be his own. - my $progIdLine = "\# $progId - " . '$Revision: 1.373 $ '."\n"; - if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) { - warn "automake line not found in $makefile\n"; - # Fallback: first line - print FILEOUT $progIdLine; - }; - print FILEOUT $MakefileData; - close FILEOUT; -} - -#----------------------------------------------------------------------------- - -# The given line needs to be removed from the makefile -# Do this by adding the special "removed line" comment at the line start. -sub removeLine ($$) -{ - my ($lookup, $old) = @_; - - $old =~ s/\034/\\\n#>- /g; # Fix continuation lines - $MakefileData =~ s/\n$lookup/\n#>\- $old/; -} - -#----------------------------------------------------------------------------- - -# Replaces the old line with the new line -# old line(s) are retained but tagged as removed. The new line(s) have the -# "added" tag placed before it. -sub substituteLine ($$) -{ - my ($lookup, $new) = @_; - - if ($MakefileData =~ /\n($lookup)/) { - $old = $1; - $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines - my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; - $new =~ s/\\\n/\034/g; - $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/; - } else { - print STDERR "Warning: substitution of \"$lookup\" in $printname failed\n"; - } -} - -#----------------------------------------------------------------------------- - -# Slap new lines on the back of the file. -sub appendLines ($) -{ - my ($new) = @_; - my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; - $new =~ s/\\\n/\034/g; # Fix continuation lines - $MakefileData .= "\n#>\+ $newCount\n$new"; -} - -#----------------------------------------------------------------------------- - -# Restore the Makefile.in to the state it was before we fiddled with it -sub restoreMakefile () -{ - $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g; - # Restore removed lines - $MakefileData =~ s/([\n\034])#>\- /$1/g; - # Remove added lines - while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/) - { - my $newCount = $1; - my $removeLines = ""; - while ($newCount--) { - $removeLines .= "[^\n\034]*([\n\034]|)"; - } - $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/; - } -} - -#----------------------------------------------------------------------------- diff --git a/admin/bcheck.pl b/admin/bcheck.pl deleted file mode 100644 index 7bf5c42..0000000 --- a/admin/bcheck.pl +++ /dev/null @@ -1,155 +0,0 @@ -#!/usr/bin/perl -w - -use DB_File; -use Fcntl ':flock'; - -if (!defined($ARGV[0])) { - print "usage: requires .class dump as parameter!\n"; - exit; -} - -sub bailout -{ - untie %bcheckdb if(defined(%bcheckdb)); - - if(defined(MYLOCK)) { - flock MYLOCK, LOCK_UN; - close(MYLOCK); - } - - print @_; - exit 5; -} - -sub ask_user -{ - my ($dbkey, $dbchunk) = @_; - - if (defined($ENV{"BCHECK_UPDATE"})) { - $bcheckdb{$dbkey} = $dbchunk; - return; - } - - &bailout("BC problem detected") if (! -t STDIN); - - print "(I)gnore / (Q)uit / (U)pdate: "; - - my $key; - while(defined(read STDIN, $key, 1)) { - $key = lc($key); - - print "got: >$key<\n"; - - return if ($key eq 'i'); - - &bailout("BC problem. aborted") if ($key eq 'q'); - - if ($key eq 'u') { - $bcheckdb{$dbkey} = $dbchunk; - return; - } - print "\n(I)gnore / (Q)uit / (U)pdate: "; - } -} - -sub diff_chunk($$) -{ - my ($oldl, $newl) = @_; - my @old = split /^/m, $oldl; - my @new = split /^/m, $newl; - my $haschanges = 0; - my $max = $#old > $#new ? $#old : $#new; - - die "whoops. key different" if ($old[0] ne $new[0]); - - if ($#old != $#new) { - warn ("Structural difference.\n"); - print @old; - print "-----------------------------------------------\n"; - print @new; - $haschanges = 1; - return; - } - - print $old[0]; - - my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/); - - my $c = 1; - while ($c < $max) { - my ($o, $n) = ($old[$c], $new[$c]); - chomp $o; - chomp $n; - $c++; - next if ($o eq $n); - - if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) { - print "comparing >$n< against >$1$class$2<\n"; - next if ($n eq "$1$class$2"); - } - - $haschanges = 1; - - print "-$o\n+$n\n\n"; - } - - return $haschanges; -} - -local $dblock = $ENV{"HOME"} . "/bcheck.lock"; -my $dbfile = $ENV{"HOME"} . "/bcheck.db"; -my $cdump = $ARGV[0]; - -die "file $cdump is not readable: $!" if (! -f $cdump); - -# make sure the advisory lock exists -open(MYLOCK, ">$dblock"); -print MYLOCK ""; - -flock MYLOCK, LOCK_EX; - -tie %bcheckdb, 'DB_File', $dbfile; - -my $chunk = ""; - -open (IN, "<$cdump") or die "cannot open $cdump: $!"; -while () { - - chop; - - s/0x[0-9a-fA-F]+/0x......../g; - - $chunk .= $_ . "\n"; - - if(/^\s*$/) { - my @lines = split /^/m, $chunk; - my $key = $lines[0]; - chomp $key; - - if($key !~ // && - $key !~ //) { - if(defined($bcheckdb{$key})) { - my $dbversion = $bcheckdb{$key}; - - if($dbversion ne $chunk) { - &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk)); - } - } - else { - $bcheckdb{$key} = $chunk; - print "NEW: $key\n"; - } - } - - $chunk = ""; - next; - } - -} -close(IN); - -untie %bcheckdb; -flock MYLOCK, LOCK_UN; -close(MYLOCK); - -exit 0; diff --git a/admin/compile b/admin/compile deleted file mode 100755 index 9bb997a..0000000 --- a/admin/compile +++ /dev/null @@ -1,99 +0,0 @@ -#! /bin/sh - -# Wrapper for compilers which do not understand `-c -o'. - -# Copyright 1999, 2000 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Usage: -# compile PROGRAM [ARGS]... -# `-o FOO.o' is removed from the args passed to the actual compile. - -prog=$1 -shift - -ofile= -cfile= -args= -while test $# -gt 0; do - case "$1" in - -o) - # configure might choose to run compile as `compile cc -o foo foo.c'. - # So we do something ugly here. - ofile=$2 - shift - case "$ofile" in - *.o | *.obj) - ;; - *) - args="$args -o $ofile" - ofile= - ;; - esac - ;; - *.c) - cfile=$1 - args="$args $1" - ;; - *) - args="$args $1" - ;; - esac - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no `-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # `.c' file was seen then we are probably linking. That is also - # ok. - exec "$prog" $args -fi - -# Name of file we expect compiler to create. -cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'` - -# Create the lock directory. -# Note: use `[/.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d -while true; do - if mkdir $lockdir > /dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir $lockdir; exit 1" 1 2 15 - -# Run the compile. -"$prog" $args -status=$? - -if test -f "$cofile"; then - mv "$cofile" "$ofile" -fi - -rmdir $lockdir -exit $status diff --git a/admin/conf.change.pl b/admin/conf.change.pl deleted file mode 100644 index ccef6b4..0000000 --- a/admin/conf.change.pl +++ /dev/null @@ -1,190 +0,0 @@ -#!/usr/bin/perl -w - -# this script patches a config.status file, to use our own perl script -# in the main loop -# we do it this way to circumvent hacking (and thereby including) -# autoconf function (which are GPL) into our LGPL acinclude.m4.in -# written by Michael Matz -# adapted by Dirk Mueller -# -# This file is free software; you can redistribute it and/or -# modify it under the terms of the GNU Library General Public -# License as published by the Free Software Foundation; either -# version 2 of the License, or (at your option) any later version. - -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Library General Public License for more details. - -# You should have received a copy of the GNU Library General Public License -# along with this library; see the file COPYING.LIB. If not, write to -# the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# we have to change two places -# 1. the splitting of the substitutions into chunks of 90 (or even 48 in -# later autoconf's -# 2. the big main loop which patches all Makefile.in's - -use File::Basename; - -my $ac_aux_dir = dirname($0); -my ($flag); -local $ac_version = 0; -my $vpath_seen = 0; -$flag = 0; - -while (<>) { -# usage of $flag: 0 -- we have seen nothing yet -# 1 -- we are in (1) -# 2 -- we have ended (1) -# 3 -- we are in (2) -# 4 -- we ended (2) - - if ($flag == 4) { - print; - } elsif ($flag == 0) { -# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..." -# ends with (excluding) "CONFIG_FILE=..." -# in later autoconf (2.14.1) there is no CONFIG_FILES= line, -# but instead the (2) directly follow (1) - if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) { - $flag = 1; - if ($1 eq 'lines') { - # lets hope its different with 2141, - # wasn't able to verify that - if ($2 eq '48') { - $ac_version = 250; - } - else { - $ac_version = 2141; - } - } elsif ($1 eq 'cmds') { - $ac_version = 213; - } - # hmm, we don't know the autoconf version, but we try anyway - } else { - print; - } - } elsif ($flag == 1) { - if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) { - print; - $flag = 2; - } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { - $flag = 3; - } - } elsif ($flag == 2) { -# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1)) -# end with: "rm -f conftest.s\*" -# on autoconf 250, it ends with '# CONFIG_HEADER section' -# -# gg: if a post-processing commands section is found first, -# stop there and insert a new loop to honour the case/esac. -# (pattern: /^\s+#\sRun the commands associated with the file./) - - if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { - $flag = 3; - } else { - print; - } - } elsif ($flag == 3) { - if (/^\s*rm\s+-f\s+conftest/ ) { - $flag = 4; - &insert_main_loop(); - } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) { - $flag = 4; - &insert_main_loop(); - #die "hhhhhhh"; - if ($ac_version != 2141) { - print STDERR "hmm, don't know autoconf version\n"; - } - } elsif (/^\#\s*CONFIG_HEADER section.*|^\s+#\s(Run) the commands associated/) { - $flag = 4; - $commands = defined $1; - &insert_main_loop(); - $commands && insert_command_loop(); - if($ac_version != 250) { - print STDERR "hmm, something went wrong :-(\n"; - } - } elsif (/VPATH/ ) { - $vpath_seen = 1; - } - } -} - -die "wrong input (flag != 4)" unless $flag == 4; -print STDERR "hmm, don't know autoconf version\n" unless $ac_version; - -sub insert_main_loop { - - if ($ac_version == 250) { - &insert_main_loop_250(); - } - else { - &insert_main_loop_213(); - } -} - -sub insert_main_loop_250 { - - print <>\$tmp/subs.sed -EOF - } - print <> \$tmp/subs.files - fi - done - if test -f \$tmp/subs.files ; then - perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL" - fi - rm -f \$tmp/subs.files - -fi -EOF - return; -} - -sub insert_main_loop_213 { - print <> \$ac_cs_root.subs -EOF - } - print <> \$ac_cs_root.sacfiles - fi -done -if test -f \$ac_cs_root.sacfiles ; then - perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL" -fi -rm -f \$ac_cs_root.s* - -EOF - return; -} - -sub insert_command_loop { - print <. -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# This shell variable is my proudest work .. or something. --bje - -set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ; -(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old) - || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ; -dummy=$tmpdir/dummy ; -files="$dummy.c $dummy.o $dummy.rel $dummy" ; -trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - rm -f $files ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; -unset files' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - alpha:OSF1:*:*) - if test $UNAME_RELEASE = "V4.0"; then - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - fi - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - eval $set_cc_for_build - cat <$dummy.s - .data -\$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - - .text - .globl main - .align 4 - .ent main -main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - $CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null - if test "$?" = 0 ; then - case `$dummy` in - 0-0) - UNAME_MACHINE="alpha" - ;; - 1-0) - UNAME_MACHINE="alphaev5" - ;; - 1-1) - UNAME_MACHINE="alphaev56" - ;; - 1-101) - UNAME_MACHINE="alphapca56" - ;; - 2-303) - UNAME_MACHINE="alphaev6" - ;; - 2-307) - UNAME_MACHINE="alphaev67" - ;; - 2-1307) - UNAME_MACHINE="alphaev68" - ;; - 3-1307) - UNAME_MACHINE="alphaev7" - ;; - esac - fi - rm -f $dummy.s $dummy && rmdir $tmpdir - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit 0;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 - rm -f $dummy.c $dummy && rmdir $tmpdir - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit 0 ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit 0 ;; - Night_Hawk:*:*:PowerMAX_OS) - echo powerpc-harris-powermax - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 - rm -f $dummy.c $dummy && rmdir $tmpdir - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi - rm -f $dummy.c $dummy && rmdir $tmpdir - fi ;; - esac - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 - rm -f $dummy.c $dummy && rmdir $tmpdir - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3D:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - # Determine whether the default compiler uses glibc. - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #if __GLIBC__ >= 2 - LIBC=gnu - #else - LIBC= - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - rm -f $dummy.c && rmdir $tmpdir - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} - exit 0 ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; - x86:Interix*:3*) - echo i386-pc-interix3 - exit 0 ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i386-pc-interix - exit 0 ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; - arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - rm -f $dummy.c && rmdir $tmpdir - test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 - ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit 0 ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit 0 ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit 0 ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit 0 ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit 0 ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit 0 ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - rm -f $dummy.c && rmdir $tmpdir - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit 0 ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit 0 ;; - i*86:*:5:[78]*) - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit 0 ;; - M68*:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit 0 ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit 0 ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit 0 ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit 0 ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Darwin:*:*) - echo `uname -p`-apple-darwin${UNAME_RELEASE} - exit 0 ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit 0 ;; - NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit 0 ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit 0 ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit 0 ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit 0 ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit 0 ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit 0 ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit 0 ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit 0 ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 -rm -f $dummy.c $dummy && rmdir $tmpdir - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/admin/config.pl b/admin/config.pl deleted file mode 100644 index 80ecbf1..0000000 --- a/admin/config.pl +++ /dev/null @@ -1,235 +0,0 @@ -#!/usr/bin/perl -# a script for use by autoconf to make the Makefiles -# from the Makefile.in's -# -# the original autoconf mechanism first splits all substitutions into groups -# of ca. 90, and than invokes sed for _every_ Makefile.in and every group -# (so around 2-3 times per Makefile.in). So this takes forever, as sed -# has to recompile the regexps every time. -# -# this script does better. It changes all Makefile.ins in one process. -# in tdelibs the time for building Makefile went down from 2:59 min to 13 sec! -# -# written by Michael Matz -# adapted by Dirk Mueller - -# This file is free software; you can redistribute it and/or -# modify it under the terms of the GNU Library General Public -# License as published by the Free Software Foundation; either -# version 2 of the License, or (at your option) any later version. - -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Library General Public License for more details. - -# You should have received a copy of the GNU Library General Public License -# along with this library; see the file COPYING.LIB. If not, write to -# the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -my $ac_subs=$ARGV[0]; -my $ac_sacfiles = $ARGV[1]; -my $ac_given_srcdir=$ARGV[2]; -my $ac_given_INSTALL=$ARGV[3]; - -#print "ac_subs=$ac_subs\n"; -#print "ac_sacfiles=$ac_sacfiles\n"; -#print "ac_given_srcdir=$ac_given_srcdir\n"; -#print "ac_given_INSTALL=$ac_given_INSTALL\n"; - -my ($srcdir, $top_srcdir); -my $INSTALL; -my $bad_perl = ($] < 5.005); - -open(CF, "< $ac_subs") || die "can't open $ac_subs: $!"; -my @subs = ; -close(CF); -chomp @subs; -@comp_match=(); -@comp_subs=(); - -if ($bad_perl) { - print "Using perl older than version 5.005\n"; - foreach my $pat (@subs) { - if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ ) - || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ ) - || ($pat =~ m/s,([^,]*),(.*),;t/) - || ($pat =~ m%s/([^/]*)/([^/]*)/g% ) - || ($pat =~ m%s/([^/]*)/([^/]*)/;t% ) - ) { - # form : s%bla%blubb%g - # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) - # or s,bla,blubb,;t t (autoconf 2.52) - my $srch = $1; - my $repl = $2; - $repl =~ s/\\(.)/$1/g; - push @comp_subs, make_closure($srch, $repl); - - } elsif ( ($pat =~ /%([^%]*)%d/ ) - || ($pat =~ m%/([^/]*)/d% ) - ) { - push @comp_subs, make_closure($1, ""); - } else { - die "Uhh. Malformed pattern in $ac_subs ($pat)" - unless ( $pat =~ /^\s*$/ ); # ignore white lines - } - } -} else { - foreach my $pat (@subs) { - if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || - ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || - ($pat =~ /s,([^,]*),(.*),;t/) ) { - # form : s%bla%blubb%g - # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) - # or s,bla,blubb,;t t (autoconf 2.52) - my $srch = $1; - my $repl = $2; - push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern - $repl =~ s/\\(.)/$1/g; - push @comp_subs, $repl; - } elsif ( ($pat =~ /%([^%]*)%d/ ) - || ($pat =~ m%/([^/]*)/d% ) - ) { - push @comp_match, eval "qr/\Q$1\E/"; - push @comp_subs, ""; - } else { - die "Uhh. Malformed pattern in $ac_cs_root.subs ($pat)" - unless ( $pat =~ /^\s*$/ ); # ignore white lines - } - } -} -undef @subs; - -# read the list of files to be patched, form: -# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile - -open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!"; -my @ac_files = ; -close(CF); -chomp @ac_files; - - -my $ac_file; -foreach $ac_file (@ac_files) { - next if $ac_file =~ /\.\./; - next if $ac_file =~ /^\s*$/; - my $ac_file_in; - my ($ac_dir, $ac_dots, $ac_dir_suffix); - - if ($ac_file =~ /.*:.*/ ) { - ($ac_file_in = $ac_file) =~ s%[^:]*:%%; - $ac_file =~ s%:.*%%; - } else { - $ac_file_in = $ac_file.".in"; - } - -# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - -# Remove last slash and all that follows it. Not all systems have dirname. - ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%; - if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) { -# The file is in a subdirectory. - if (! -d "$ac_dir") { mkdir "$ac_dir", 0777; } - ($ac_dir_suffix = $ac_dir) =~ s%^./%%; - $ac_dir_suffix="/".$ac_dir_suffix; -# A "../" for each directory in $ac_dir_suffix. - ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g; - } else { - $ac_dir_suffix=""; - $ac_dots=""; - } - - if ($ac_given_srcdir eq ".") { - $srcdir="."; - if ($ac_dots) { - ( $top_srcdir = $ac_dots) =~ s%/$%%; - } else { $top_srcdir="."; } - } elsif ($ac_given_srcdir =~ m%^/%) { - $srcdir=$ac_given_srcdir.$ac_dir_suffix; - $top_srcdir = $ac_given_srcdir; - } else { - $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix; - $top_srcdir = $ac_dots.$ac_given_srcdir; - } - - if ($ac_given_INSTALL) { - if ($ac_given_INSTALL =~ m%^/% ) { - $INSTALL = $ac_given_INSTALL; - } else { - $INSTALL = $ac_dots.$ac_given_INSTALL; - } - } - - print "fast creating $ac_file\n"; - unlink $ac_file; - my $ac_comsub=""; - my $fname=$ac_file_in; - $fname =~ s%.*/%%; - my $configure_input="Generated automatically from $fname by config.pl."; - if ($ac_file =~ /.*[Mm]akefile.*/) { - $ac_comsub="# ".$configure_input."\n"; # for the first line in $ac_file - } - - my $ac_file_inputs; - ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%; - $ac_file_inputs =~ s%:% $ac_given_srcdir/%g; - - patch_file($ac_file, $ac_file_inputs, $ac_comsub); -} - -sub patch_file { - my ($outf, $infiles, $identline) = @_; - my $filedata; - my @infiles=split(' ', $infiles); - my $i=0; - - foreach my $name (@infiles) { - if (open(CF, "< $name")) { - while () { - $filedata .= $_; - } - close(CF); - } else { - print STDERR "can't open $name: $!"."\n"; - } - } - if ($identline) { - # Put the ident in the second line. For shitty automake 1.6x. - $filedata =~ s%\n%\n$identline%; - } - - $filedata =~ s%\@configure_input\@%$configure_input%g; - $filedata =~ s%\@srcdir\@%$srcdir%g; - $filedata =~ s%\@top_srcdir\@%$top_srcdir%g; - $filedata =~ s%\@INSTALL\@%$INSTALL%g; - - if ($bad_perl) { - while ($i <= $#comp_subs) { - my $ref = $comp_subs[$i]; - &$ref(\$filedata); - $i++; - } - } else { - while ($i <= $#comp_match) { - $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g; - $i++; - } - } - open(CF, "> $outf") || die "can't create $outf: $!"; - print CF $filedata; - close(CF); -} - -sub make_closure { - my ($pat, $sub) = @_; - $pat =~ s/\@/\\@/g; # @bla@ -> \@bla\@ - $pat =~ s/\$/\\\$/g; # $bla -> \$bla - $sub =~ s/\@/\\@/g; - $sub =~ s/\$/\\\$/g; - my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%$pat%$sub%g; }"; - if ($@) { - print "can't create CODE: $@\n"; - } - return $ret; -} diff --git a/admin/config.sub b/admin/config.sub deleted file mode 100755 index 1dea9b7..0000000 --- a/admin/config.sub +++ /dev/null @@ -1,1470 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002 Free Software Foundation, Inc. - -timestamp='2002-09-05' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit 0;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k \ - | m32r | m68000 | m68k | m88k | mcore \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mipsisa32 | mipsisa32el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | ns16k | ns32k \ - | openrisc | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ - | strongarm \ - | tahoe | thumb | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xscale | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ - | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \ - | clipper-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* \ - | m32r-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39 | mipstx39el \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ - | xtensa-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - mmix*) - basic_machine=mmix-knuth - os=-mmixware - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - or32 | or32-*) - basic_machine=or32-unknown - os=-coff - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2) - basic_machine=i686-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3d) - basic_machine=alpha-cray - os=-unicos - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic4x | c4x*) - basic_machine=tic4x-unknown - os=-coff - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - windows32) - basic_machine=i386-pc - os=-windows32-msvcrt - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele) - basic_machine=sh-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv9 | sparcv9b) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto*) - os=-nto-qnx - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/admin/configure.in.bot.end b/admin/configure.in.bot.end deleted file mode 100644 index fb483b6..0000000 --- a/admin/configure.in.bot.end +++ /dev/null @@ -1,12 +0,0 @@ -if test "$all_tests" = "bad"; then - if test ! "$cache_file" = "/dev/null"; then - echo "" - echo "Please remove the file $cache_file after changing your setup" - echo "so that configure will find the changes next time." - echo "" - fi -else - echo "" - echo "Good - your configure finished. Start make now" - echo "" -fi diff --git a/admin/configure.in.min b/admin/configure.in.min deleted file mode 100644 index 7c7e25a..0000000 --- a/admin/configure.in.min +++ /dev/null @@ -1,57 +0,0 @@ -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -# Original Author was Kalle@kde.org -# I lifted it in some mater. (Stephan Kulow) -# I used much code from Janos Farkas - -dnl Process this file with autoconf to produce a configure script. - -AC_INIT(acinclude.m4) dnl a source file from your sub dir - -dnl This is so we can use kde-common -AC_CONFIG_AUX_DIR(admin) - -dnl This ksh/zsh feature conflicts with `cd blah ; pwd` -unset CDPATH - -dnl Checking host/target/build systems, for make, install etc. -AC_CANONICAL_SYSTEM -dnl Perform program name transformation -AC_ARG_PROGRAM - -dnl Automake doc recommends to do this only here. (Janos) -AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs - -KDE_SET_PREFIX - -dnl generate the config header -AM_CONFIG_HEADER(config.h) dnl at the distribution this done - -dnl Checks for programs. -AC_CHECK_COMPILERS -AC_ENABLE_SHARED(yes) -AC_ENABLE_STATIC(no) -KDE_PROG_LIBTOOL - -dnl for NLS support. Call them in this order! -dnl WITH_NLS is for the po files -AM_KDE_WITH_NLS - -dnl KDE_USE_QT -AC_PATH_KDE diff --git a/admin/cvs-clean.pl b/admin/cvs-clean.pl deleted file mode 100644 index 669dbdc..0000000 --- a/admin/cvs-clean.pl +++ /dev/null @@ -1,87 +0,0 @@ -#! /usr/bin/perl - -# -# This script recursively (beginning with the current directory) -# wipes out everything not registered in CVS. -# -# written by Oswald Buddenhagen -# inspired by the "old" cvs-clean target from Makefile.common -# -# This file is free software in terms of the BSD licence. That means -# that you can do anything with it except removing this license or -# the above copyright notice. There is NO WARRANTY of any kind. -# - -sub rmrf() -{ - my $fn = shift; - lstat ($fn); - if (-d _) { - if (opendir (DIR, $fn)) { - for my $efn (grep (!/^\.\.?$/, readdir (DIR))) { - &rmrf ($fn."/".$efn); - } - closedir (DIR); - rmdir ($fn); - } - } else { - unlink ($fn); - } -} - -sub newfiles() -{ - my ($indir, $incvs) = @_; - for my $n (keys (%$incvs)) { delete $$indir{$n} } - return sort (keys (%$indir)); -} - -sub cvsclean() -{ - my $dir = shift; - my (%dirsdir, %filesdir, %dirscvs, %filescvs); - my $dnam = $dir ? $dir : "."; - if (!opendir (DIR, $dnam)) { - print STDERR "Cannot enter \"".$dnam."\".\n"; - return; - } - for my $fn (grep (!/^\.\.?$/, readdir (DIR))) { - if (-d $dir.$fn) { - $fn eq "CVS" or $dirsdir{$fn} = 1; - } else { - $filesdir{$fn} = 1; - } - } - closedir (DIR); - if (!open (FILE, "<".$dir."CVS/Entries")) { - print STDERR "No CVS information in \"".$dnam."\".\n"; - return; - } - while () { - m%^D/([^/]+)/.*$% and $dirscvs{$1} = 1; - m%^/([^/]+)/.*$% and $filescvs{$1} = 1; - } - close (FILE); - if (open (FILE, "<".$dir."CVS/Entries.Log")) { - while () { - m%^A D/([^/]+)/.*$% and $dirscvs{$1} = 1; - m%^A /([^/]+)/.*$% and $filescvs{$1} = 1; - m%^R D/([^/]+)/.*$% and delete $dirscvs{$1}; - m%^R /([^/]+)/.*$% and delete $filescvs{$1}; - } - close (FILE); - } - for my $fn (&newfiles (\%filesdir, \%filescvs)) { - print ("F ".$dir.$fn."\n"); - &rmrf ($dir.$fn); - } - for my $fn (&newfiles (\%dirsdir, \%dirscvs)) { - print ("D ".$dir.$fn."\n"); - &rmrf ($dir.$fn); - } - for my $fn (sort (keys (%dirscvs))) { - &cvsclean ($dir.$fn."/"); - } -} - -&cvsclean (""); diff --git a/admin/cvs.sh b/admin/cvs.sh deleted file mode 100644 index 173eca7..0000000 --- a/admin/cvs.sh +++ /dev/null @@ -1,594 +0,0 @@ -#! /bin/sh -# -# cvs.sh -# -# This file contains support code from Makefile.common -# It defines a shell function for each known target -# and then does a case to call the correct function. - -call_and_fix_autoconf() -{ - $AUTOCONF || exit 1 - if test -r configure.in.in ; then - perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ - \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ - \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ - \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ - \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure - fi -} - -strip_makefile() -{ - if test -f $makefile_wo; then :; else - perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo - fi -} - -check_autotool_versions() -{ -AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1` -case $AUTOCONF_VERSION in - Autoconf*2.5* | autoconf*2.5* ) : ;; - "" ) - echo "*** AUTOCONF NOT FOUND!." - echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" - exit 1 - ;; - * ) - echo "*** YOU'RE USING $AUTOCONF_VERSION." - echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" - exit 1 - ;; -esac - -AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1` -case $AUTOHEADER_VERSION in - Autoconf*2.5* | autoheader*2.5* ) : ;; - "" ) - echo "*** AUTOHEADER NOT FOUND!." - echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" - exit 1 - ;; - * ) - echo "*** YOU'RE USING $AUTOHEADER_VERSION." - echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" - exit 1 - ;; -esac - -AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` -case $AUTOMAKE_STRING in - automake*1.5d* | automake*1.5* | automake*1.5-* ) - echo "*** YOU'RE USING $AUTOMAKE_STRING." - echo "*** KDE requires automake 1.6.1 or newer" - exit 1 - ;; - automake*1.6.* | automake*1.7* ) : ;; - "" ) - echo "*** AUTOMAKE NOT FOUND!." - echo "*** KDE requires automake 1.6.1 or newer" - exit 1 - ;; - unsermake* ) : - echo "*** YOU'RE USING UNSERMAKE." - echo "*** GOOD LUCK!! :)" - ;; - * ) - echo "*** YOU'RE USING $AUTOMAKE_STRING." - echo "*** KDE requires automake 1.6" - exit 1 - ;; -esac -} - -cvs() -{ -check_autotool_versions - -### Produce acinclude.m4 -if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then - echo "*** Creating acinclude.m4" - rm -f acinclude.m4 configure.files - - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 -fi - -### Make new subdirs and configure.in. -### The make calls could be optimized away here, -### with a little thought. -if test -r configure.in.in; then - rm -f configure.in - echo "*** Creating list of subdirectories" - create_subdirs - - if test -r Makefile.am.in; then - echo "*** Creating Makefile.am" - if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 - else - Makefile_am - fi - fi - echo "*** Creating configure.in" - configure_files - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 -fi - -echo "*** Creating aclocal.m4" -$ACLOCAL || exit 1 -echo "*** Creating configure" -call_and_fix_autoconf - -if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then - echo "*** Creating config.h template" - $AUTOHEADER || exit 1 -fi - -echo "*** Creating Makefile templates" -$AUTOMAKE || exit 1 -if test -z "$UNSERMAKE"; then - echo "*** Postprocessing Makefile templates" - perl -w admin/am_edit || exit 1 -fi - -if egrep "^cvs-local:" $makefile_am >/dev/null; then \ - strip_makefile - $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 -fi - -echo "*** Creating date/time stamp" -touch stamp-h.in - -echo "*** Finished" -echo " Don't forget to run ./configure" -echo " If you haven't done so in a while, run ./configure --help" -} - -dist() -{ -check_autotool_versions - -### -### First build all of the files necessary to do just "make" -### -if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 -fi -if test -r configure.in.in; then - create_subdirs - Makefile_am - configure_files - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./configure.in -fi -$ACLOCAL -$AUTOHEADER -$AUTOMAKE --foreign --include-deps -perl -w admin/am_edit -call_and_fix_autoconf -touch stamp-h.in -if grep "^cvs-local:" $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo cvs-local top_srcdir=. -fi - -### -### Then make messages -### -if test -d po; then - LIST=`find ./po -name "*.po"` - for i in $LIST; do - file2=`echo $i | sed -e "s#\.po#\.gmo#"` - msgfmt -o $file2 $i || touch $file2 - done -fi -if grep "^cvs-dist-local:" $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. -fi -} - -subdir_dist() -{ -$ACLOCAL -$AUTOHEADER -$AUTOMAKE -perl -w ../admin/am_edit -call_and_fix_autoconf -touch stamp-h.in -} - -configure_in() -{ -rm -f configure.in configure.in.new -kde_use_qt_param= -test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } -cat `fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` > configure.in.new -echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new -if test -f Makefile.am.in; then - subdirs=`cat subdirs` - for dir in $subdirs; do - dir=`echo $dir | sed -e "s,[-+.],_,g"` - echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new - done -fi - -echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new -if test -n "$UNSERMAKE"; then - echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new - echo "AC_CONFIG_FILES([ Makefile.calls ])" >> configure.in.new -fi - -if test -f inst-apps; then - topleveldirs=`cat inst-apps` -else - topleveldirs= - for dir in `ls -1d * | sort`; do - if test "$dir" != "debian" && test -d $dir; then - topleveldirs="$topleveldirs $dir" - fi - done -fi - -for topleveldir in $topleveldirs; do - if test -f $topleveldir/configure.in; then - continue - fi - if test -f $topleveldir/Makefile.am; then :; else - continue - fi - - mfs=`find $topleveldir -name Makefile.am -print | fgrep -v "/." | \ - sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'` - for i in $mfs; do - echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new - if test -n "$UNSERMAKE"; then - echo "AC_CONFIG_FILES([ $i.rules ])" >> configure.in.new - echo "AC_CONFIG_FILES([ $i.calls ])" >> configure.in.new - fi - done -done - -files=`cat configure.files` -list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` -for file in $list; do - echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new -done - -if test -n "$UNSERMAKE"; then - echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new -fi - -midfiles=`cat configure.files | fgrep "configure.in.mid"` -test -n "$midfiles" && cat $midfiles >> configure.in.new - -echo "AC_OUTPUT" >> configure.in.new -modulename= -if test -f configure.in.in; then - if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then - kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` - fi - if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then - line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` - if test -n "$line"; then - modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` - VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` - fi - sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ - configure.in.new > configure.in && mv configure.in configure.in.new - fi -fi -if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then - VERSION="\"3.1.0\"" -fi -if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then - modulename=`pwd`; - modulename=`basename $modulename` - esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` - modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` - -fi -if test -n "$kde_use_qt_param"; then - sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ - configure.in.new > configure.in && mv configure.in configure.in.new -fi -sed -e "s#@MODULENAME@#$modulename#" configure.in.new | - sed -e "s#@VERSION@#$VERSION#" > configure.in -botfiles=`cat configure.files | egrep "configure.in.bot"` -test -n "$botfiles" && cat $botfiles >> configure.in -cat $admindir/configure.in.bot.end >> configure.in -rm -f configure.in.new -} - -configure_files() -{ -admindir=NO -for i in . .. ../.. ../../..; do - if test -x $i/admin; then admindir=$i/admin; break; fi -done -rm -f configure.files -touch configure.files -if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then - echo $admindir/configure.in.min >> configure.files -fi -test -f configure.in.in && echo configure.in.in >> configure.files -# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs -if test -f inst-apps; then - inst=`cat inst-apps` - list="" - for i in $inst; do - list="$list `find $i/ -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ - sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`" - done -else - list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ - sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"` -fi -for i in $list; do if test -f $i && test `dirname $i` != "." ; then - echo $i >> configure.files -fi; done -test -f configure.in.mid && echo configure.in.mid >> configure.files -test -f configure.in.bot && echo configure.in.bot >> configure.files -} - -create_subdirs() -{ -if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then - # as many modules contain rules to create subdirs without any - # dependencies make won't create it unless there is no file. - # so we check if that's a dummy rule or one that works - rm -f subdirs.cvs.sh.$$ - if test -f subdirs; then - mv subdirs subdirs.cvs.sh.$$ - fi - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1 - if test -f subdirs.cvs.sh.$$; then - if test -s subdirs; then - rm subdirs.cvs.sh.$$ - else - mv subdirs.cvs.sh.$$ subdirs - fi - fi -else - subdirs -fi -} - -subdirs() -{ -dirs= -idirs= -if test -f inst-apps; then - idirs=`cat inst-apps` -else - idirs=`ls -1 | sort` -fi - -compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` -compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` -for i in $idirs; do - if test -f $i/Makefile.am; then - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - fi -done - -: > ./_SUBDIRS - -for d in $compilefirst; do - echo $d >> ./_SUBDIRS -done - -(for d in $dirs; do - list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` - for s in $list; do - echo $s $d - done - list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` - for s in $list; do - echo $d $s - done - echo $d $d -done ) | tsort >> ./_SUBDIRS - -for d in $compilelast; do - echo $d >> ./_SUBDIRS -done - -if test -r subdirs && cmp -s subdirs _SUBDIRS; then - rm -f _SUBDIRS -fi -test -r _SUBDIRS && mv _SUBDIRS subdirs || true -} - -Makefile_am() -{ -if test -f Makefile.am.in; then - compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` - compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` - - idirs= - dirs= - if test -f inst-apps; then - idirs=`cat inst-apps` - else - idirs=`cat subdirs` - fi - for i in $idirs; do - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - done - - if test -n "$UNSERMAKE"; then - cp Makefile.am.in Makefile.am - topsubdirs= - for i in $compilefirst $dirs $compilelast; do - vari=`echo $i | sed -e "s,[-+],_,g"` - echo "if $vari""_SUBDIR_included" >> Makefile.am - echo "$vari""_SUBDIR=$i" >> Makefile.am - echo "endif" >> Makefile.am - topsubdirs="$topsubdirs \$($vari""_SUBDIR)" - done - echo "SUBDIRS=$topsubdirs" >> Makefile.am - else - cat Makefile.am.in | \ - sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ - sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am - echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am - fi -fi -} - -cvs_clean() -{ -if test -d CVS; then :; else - echo "You don't have a toplevel CVS directory." - echo "You most certainly didn't use cvs to get these sources." - echo "But this function depends on cvs's information." - exit 1 -fi -perl $admindir/cvs-clean.pl -} - -package_merge() -{ -catalogs=$POFILES -for cat in $catalogs; do - msgmerge -o $cat.new $cat $PACKAGE.pot - if test -s $cat.new; then - grep -v "\"POT-Creation" $cat.new > $cat.new.2 - grep -v "\"POT-Creation" $cat >> $cat.new.1 - if diff $cat.new.1 $cat.new.2; then - rm $cat.new - else - mv $cat.new $cat - fi - rm -f $cat.new.1 $cat.new.2 - fi -done -} - -package_messages() -{ -rm -rf po.backup -mkdir po.backup - -for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do - egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i - cp po/$i po.backup/backup_$i - touch -r po/$i po.backup/backup_$i - rm po/$i -done - -podir=${podir:-$PWD/po} -files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` -dirs=`for i in $files; do echo \`dirname $i\`; done` -tmpname="$PWD/messages.log" -if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi -if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi -export EXTRACTRC PREPARETIPS - -for subdir in $dirs; do - test -z "$VERBOSE" || echo "Making messages in $subdir" - (cd $subdir - if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then - $EXTRACTRC *.rc *.ui > rc.cpp - else - candidates=`ls -1 *.rc *.ui 2>/dev/null` - if test -n "$candidates"; then - echo "$subdir has *.rc or *.ui files, but not correct messages line" - fi - fi - if test -n "`grep -r TDEAboutData *.c* *.C* 2>/dev/null`"; then - echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp - else echo " " > _translatorinfo.cpp - fi - perl -e '$mes=0; while () { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile - - $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \ - XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-${TDEDIR:-/usr/local/kde}/include}/kde.pot" \ - messages - exit_code=$? - if test "$exit_code" != 0; then - echo "make exit code: $exit_code" - fi - ) 2>&1 | grep -v '^make\[1\]' > $tmpname - test -s $tmpname && { echo $subdir ; cat "$tmpname"; } - test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp - rm -f $subdir/_translatorinfo.cpp - rm -f $subdir/_transMakefile -done -rm -f $tmpname -for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do - test -f po/$i || echo "disappeared: $i" -done -for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do - msgmerge -q -o po/$i po/$i po/$i - egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot - if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then - echo "will update $i" - msgmerge -q po.backup/backup_$i po/$i > temp.pot - mv temp.pot po/$i - else - if test -f po.backup/backup_$i; then - test -z "$VERBOSE" || echo "I'm restoring $i" - mv po.backup/backup_$i po/$i - rm po.backup/$i - else - echo "will add $i" - fi - fi -done -rm -f temp.pot -rm -rf po.backup -} - -unset CDPATH -admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` -test "x$admindir" = "x$0" && admindir=. - -test "x$MAKE" = x && MAKE=make -makefile_am=Makefile.am -makefile_wo=Makefile.am -if test -f Makefile.am.in; then - makefile_am=Makefile.am.in - makefile_wo=Makefile.am.in.wo -fi - -# Suck in the AUTOCONF detection code -. $admindir/detect-autoconf.sh - -### -### Main -### - -arg=`echo $1 | tr '\-.' __` -case $arg in - cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ - cvs_clean | package_merge | package_messages | Makefile_am ) $arg ;; - configure ) call_and_fix_autoconf ;; - * ) echo "Usage: cvs.sh " - echo "Target can be one of:" - echo " cvs cvs-clean dist" - echo " configure.in configure.files" - echo " package-merge package-messages" - echo "" - echo "Usage: anything but $1" - exit 1 ;; -esac - -if test -f Makefile.am.in.wo; then - rm Makefile.am.in.wo -fi - -exit 0 diff --git a/admin/debianrules b/admin/debianrules deleted file mode 100755 index 8143640..0000000 --- a/admin/debianrules +++ /dev/null @@ -1,119 +0,0 @@ -#!/usr/bin/perl -w - -use Shell qw(mv cp mkdir rm) ; -use File::Find; -use Cwd; - -$origPwd = `pwd`; -chomp $origPwd; - -$kde_confdir = "/etc/kde3"; -$kde_prefix = "/usr"; -$kde_bindir = "$kde_prefix/bin"; -$kde_includedir = "$kde_prefix/include/tde"; -$kde_libdir = "$kde_prefix/lib"; -$kde_cgidir = "$kde_prefix/lib/cgi-bin"; -$kde_moduledir = "$kde_prefix/lib/kde3"; -$kde_appsdir = "$kde_prefix/share/applnk"; -$kde_datadir = "$kde_prefix/share/apps"; -$kde_htmldir = "$kde_prefix/share/doc/kde/HTML"; -$kde_icondir = "$kde_prefix/share/icons"; -$kde_locale = "$kde_prefix/share/locale"; -$kde_mimedir = "$kde_prefix/share/mimelnk"; -$kde_servicesdir = "$kde_prefix/share/services"; -$kde_servicetypesdir = "$kde_prefix/share/servicetypes"; -$kde_sounddir = "$kde_prefix/share/sounds"; -$kde_templatesdir = "$kde_prefix/share/templates"; -$kde_wallpaperdir = "$kde_prefix/share/wallpapers"; - -$mandir = "$kde_prefix/share/man"; -$infodir = "$kde_prefix/share/info"; -$sysconfdir = "/etc"; - -$QTDIR = "/usr/share/qt3"; -$IDL = "$kde_bindir/cuteidl"; -$DCOPIDL = "$kde_bindir/dcopidl"; -$DCOPIDL2CPP = "$kde_bindir/dcopidl2cpp"; -$KDB2HTML = "$kde_bindir/kdb2html"; -$MCOPIDL = "$kde_bindir/mcopidl"; -$ARTSCCONFIG = "$kde_bindir/artsc-config"; - -if (defined $ENV{DEB_BUILD_OPTIONS} && - $ENV{DEB_BUILD_OPTIONS} =~ /\bdebug\b/) { - $enable_debug="--enable-debug"; - $enable_final=""; -} -else { - $enable_debug="--disable-debug"; - if (defined $ENV{DEB_BUILD_OPTIONS} && - $ENV{DEB_BUILD_OPTIONS} =~ /\bnofinal\b/) { - $enable_final=""; - } else { - $enable_final="--enable-final"; - } -} - -if (@ARGV && $ARGV[0] eq 'echodirs') { - print STDOUT "export kde_confdir=$kde_confdir\n"; - print STDOUT "export kde_prefix=$kde_prefix\n"; - print STDOUT "export kde_bindir=$kde_bindir\n"; - print STDOUT "export kde_includedir=$kde_includedir\n"; - print STDOUT "export kde_libdir=$kde_libdir\n"; - print STDOUT "export kde_cgidir=$kde_cgidir\n"; - print STDOUT "export kde_moduledir=$kde_moduledir\n"; - print STDOUT "export kde_appsdir=$kde_appsdir\n"; - print STDOUT "export kde_datadir=$kde_datadir\n"; - print STDOUT "export kde_htmldir=$kde_htmldir\n"; - print STDOUT "export kde_icondir=$kde_icondir\n"; - print STDOUT "export kde_locale=$kde_locale\n"; - print STDOUT "export kde_mimedir=$kde_mimedir\n"; - print STDOUT "export kde_servicesdir=$kde_servicesdir\n"; - print STDOUT "export kde_servicetypesdir=$kde_servicetypesdir\n"; - print STDOUT "export kde_sounddir=$kde_sounddir\n"; - print STDOUT "export kde_templatesdir=$kde_templatesdir\n"; - print STDOUT "export kde_wallpaperdir=$kde_wallpaperdir\n"; - - print STDOUT "export mandir=$mandir\n"; - print STDOUT "export infodir=$infodir\n"; - print STDOUT "export sysconfdir=$sysconfdir\n"; - - print STDOUT "export QTDIR=$QTDIR\n"; - print STDOUT "export IDL=$IDL\n"; - print STDOUT "export DCOPIDL=$DCOPIDL\n"; - print STDOUT "export DCOPIDL2CPP=$DCOPIDL2CPP\n"; - print STDOUT "export KDB2HTML=$KDB2HTML\n"; - print STDOUT "export MCOPIDL=$MCOPIDL\n"; - print STDOUT "export ARTSCCONFIG=$ARTSCCONFIG\n"; - print STDOUT "export INSTALL_DATA=install -p -c -m 644\n"; - - print STDOUT "configkde=$enable_debug $enable_final --disable-rpath --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --sysconfdir=\$(sysconfdir) --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt3 --mandir=\$(mandir) --infodir=\$(infodir) --with-xinerama\n"; - print STDOUT "configkdevelop=$enable_debug $enable_final --disable-rpath --enable-docbase --enable-kdoc2 --libdir=\$(kde_libdir) --includedir=\$(kde_includedir) --with-qt-includes=/usr/include/qt3 --mandir=\$(mandir) --with-tdelibsdoc-dir=/usr/share/doc/tdelibs3-doc/html --with-xinerama\n"; - print STDOUT "configkdepim=$enable_debug $enable_final --disable-rpath --with-extra-includes=/usr/include/libpisock --enable-shared --prefix=\$(kde_prefix) --libexecdir=\$(kde_bindir) --with-qt-includes=/usr/include/qt3 --mandir=\$(mandir) --infodir=\$(infodir) --with-xinerama\n"; - - exit -} - -if (@ARGV && $ARGV[0] eq 'echoglobals') { - print STDOUT "[Directories]\n"; - print STDOUT "dir_config=$kde_confdir\n"; - print STDOUT "dir_tmp=/tmp\n"; - print STDOUT "dir_socket=/tmp\n"; - print STDOUT "dir_exe=$kde_bindir\n"; - print STDOUT "dir_lib=$kde_libdir\n"; - print STDOUT "dir_cgi=$kde_cgidir\n"; - print STDOUT "dir_module=$kde_moduledir\n"; - print STDOUT "dir_apps=$kde_appsdir\n"; - print STDOUT "dir_data=$kde_datadir\n"; - print STDOUT "dir_html=$kde_htmldir\n"; - print STDOUT "dir_icon=$kde_icondir\n"; - print STDOUT "dir_locale=$kde_locale\n"; - print STDOUT "dir_mime=$kde_mimedir\n"; - print STDOUT "dir_services=$kde_servicesdir\n"; - print STDOUT "dir_servicetypes=$kde_servicetypesdir\n"; - print STDOUT "dir_sound=$kde_sounddir\n"; - print STDOUT "dir_templates=$kde_templatesdir\n"; - print STDOUT "dir_wallpaper=$kde_wallpaperdir\n"; - print STDOUT "[General]\n"; - print STDOUT "TerminalApplication=x-terminal-emulator\n"; - exit -} diff --git a/admin/depcomp b/admin/depcomp deleted file mode 100755 index 4c20c6c..0000000 --- a/admin/depcomp +++ /dev/null @@ -1,441 +0,0 @@ -#! /bin/sh - -# depcomp - compile a program generating dependencies as side-effects -# Copyright 1999, 2000 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi -# `libtool' can also be set to `yes' or `no'. - -depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. This file always lives in the current directory. - # Also, the AIX compiler puts `$object:' at the start of each line; - # $object doesn't have directory information. - stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" - outname="$stripped.o" - if test "$libtool" = yes; then - "$@" -Wc,-M - else - "$@" -M - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Must come before tru64. - - # Intel's C compiler understands `-MD -MF file'. However - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - rm -f "$tmpdepfile" - ;; - -tru64) - # The Tru64 AIX compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - - tmpdepfile1="$object.d" - tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` - if test "$libtool" = yes; then - "$@" -Wc,-MD - else - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - if test -f "$tmpdepfile1"; then - tmpdepfile="$tmpdepfile1" - else - tmpdepfile="$tmpdepfile2" - fi - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a space and a tab in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - test -z "$dashmflag" && dashmflag=-M - ( IFS=" " - case " $* " in - *" --mode=compile "*) # this is libtool, let us make it quiet - for arg - do # cycle over the arguments - case "$arg" in - "--mode=compile") - # insert --quiet before "--mode=compile" - set fnord "$@" --quiet - shift # fnord - ;; - esac - set fnord "$@" "$arg" - shift # fnord - shift # "$arg" - done - ;; - esac - "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - # X makedepend - ( - shift - cleared=no - for arg in "$@"; do - case $cleared in no) - set ""; shift - cleared=yes - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift;; - -*) - ;; - *) - set fnord "$@" "$arg"; shift;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tail +3 "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - ( IFS=" " - case " $* " in - *" --mode=compile "*) - for arg - do # cycle over the arguments - case $arg in - "--mode=compile") - # insert --quiet before "--mode=compile" - set fnord "$@" --quiet - shift # fnord - ;; - esac - set fnord "$@" "$arg" - shift # fnord - shift # "$arg" - done - ;; - esac - "$@" -E | - sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the proprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - ( IFS=" " - case " $* " in - *" --mode=compile "*) - for arg - do # cycle over the arguments - case $arg in - "--mode=compile") - # insert --quiet before "--mode=compile" - set fnord "$@" --quiet - shift # fnord - ;; - esac - set fnord "$@" "$arg" - shift # fnord - shift # "$arg" - done - ;; - esac - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - ) & - proc=$! - "$@" - stat=$? - wait "$proc" - if test "$stat" != 0; then exit $stat; fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 diff --git a/admin/detect-autoconf.sh b/admin/detect-autoconf.sh deleted file mode 100644 index 20904e4..0000000 --- a/admin/detect-autoconf.sh +++ /dev/null @@ -1,81 +0,0 @@ -#! /bin/sh - -# Global variables... -AUTOCONF="autoconf" -AUTOHEADER="autoheader" -AUTOM4TE="autom4te" -AUTOMAKE="automake" -ACLOCAL="aclocal" - - -# We don't use variable here for remembering the type ... strings. -# local variables are not that portable, but we fear namespace issues with -# our includer. The repeated type calls are not that expensive. -checkAutoconf() -{ - if test -x "`$WHICH autoconf-2.5x`" ; then - AUTOCONF="`$WHICH autoconf-2.5x`" - elif test -x "`$WHICH autoconf-2.54`" ; then - AUTOCONF="`$WHICH autoconf-2.54`" - elif test -x "`$WHICH autoconf-2.53`" ; then - AUTOCONF="`$WHICH autoconf-2.53`" - elif test -x "`$WHICH autoconf-2.53a`" ; then - AUTOCONF="`$WHICH autoconf-2.53a`" - elif test -x "`$WHICH autoconf-2.52`" ; then - AUTOCONF="`$WHICH autoconf-2.52`" - elif test -x "`$WHICH autoconf2.50`" ; then - AUTOCONF="`$WHICH autoconf2.50`" - fi -} - -checkAutoheader() -{ - if test -x "`$WHICH autoheader-2.5x`" ; then - AUTOHEADER="`$WHICH autoheader-2.5x`" - AUTOM4TE="`$WHICH autom4te-2.5x`" - elif test -x "`$WHICH autoheader-2.54`" ; then - AUTOHEADER="`$WHICH autoheader-2.54`" - AUTOM4TE="`$WHICH autom4te-2.54`" - elif test -x "`$WHICH autoheader-2.53`" ; then - AUTOHEADER="`$WHICH autoheader-2.53`" - AUTOM4TE="`$WHICH autom4te-2.53`" - elif test -x "`$WHICH autoheader-2.53a`" ; then - AUTOHEADER="`$WHICH autoheader-2.53a`" - AUTOM4TE="`$WHICH autom4te-2.53a`" - elif test -x "`$WHICH autoheader-2.52`" ; then - AUTOHEADER="`$WHICH autoheader-2.52`" - elif test -x "`$WHICH autoheader2.50`" ; then - AUTOHEADER="`$WHICH autoheader2.50`" - fi -} - -checkAutomakeAclocal () -{ - if test -z "$UNSERMAKE"; then - if test -x "`$WHICH automake-1.6`" ; then - AUTOMAKE="`$WHICH automake-1.6`" - ACLOCAL="`$WHICH aclocal-1.6`" - elif test -x "`$WHICH automake-1.7`" ; then - AUTOMAKE="`$WHICH automake-1.7`" - ACLOCAL="`$WHICH aclocal-1.7`" - fi - else - AUTOMAKE="$UNSERMAKE" - fi -} - -checkWhich () -{ - WHICH="" - for i in "type -p" "which" "type" ; do - T=`$i sh 2> /dev/null` - test -x "$T" && WHICH="$i" && break - done -} - -checkWhich -checkAutoconf -checkAutoheader -checkAutomakeAclocal - -export WHICH AUTOHEADER AUTOCONF AUTOM4TE AUTOMAKE ACLOCAL diff --git a/admin/install-sh b/admin/install-sh deleted file mode 100755 index 11870f1..0000000 --- a/admin/install-sh +++ /dev/null @@ -1,251 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - : -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=$mkdirprog - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f "$src" ] || [ -d "$src" ] - then - : - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - : - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - : - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' - ' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - : - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - : - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/admin/libtool.m4.in b/admin/libtool.m4.in deleted file mode 100644 index 15709d0..0000000 --- a/admin/libtool.m4.in +++ /dev/null @@ -1,5427 +0,0 @@ -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001 -## Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 47 AC_PROG_LIBTOOL - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([LT_AC_PROG_SED])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="[$]2" -])# _LT_AC_SYS_COMPILER - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -AC_DIVERT_POP -])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-linux*) - # Test if the compiler is 64bit - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *"ELF 32"*) - LINUX_64_MODE="32" - ;; - *"ELF 64"*) - LINUX_64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one - AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, - [AC_TRY_LINK([], - [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); - DllMain (0, 0, 0);], - [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) - - case $host/$CC in - *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) - # old mingw systems require "-dll" to link a DLL, while more recent ones - # require "-mdll" - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -mdll" - AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, - [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) - CFLAGS="$SAVE_CFLAGS" ;; - *-*-cygwin* | *-*-pw32*) - # cygwin systems need to pass --dll to the linker, and not link - # crt.o which will require a WinMain@16 definition. - lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; - esac - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $3" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - testring="ABCD" - - case $host_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring=$testring$testring - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - ifelse([$1],[],[save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"], - [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"], - [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS" - GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - # Append any errors to the config.log. - cat out/conftest.err 1>&AS_MESSAGE_LOG_FD - else - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - ifelse([$1],[],[CFLAGS="$save_CFLAGS"], - [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"], - [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"]) - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else - AC_MSG_RESULT([no]) -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"` - if echo "$sys_lib_search_path_spec" | [egrep ';[C-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - if test "$host_cpu" = ia64; then - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - else - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - fi - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags=TAGS], - [include additional configurations @<:@CXX,GCJ@:>@])], - [tagnames="$withval"], - [tagnames="CXX,GCJ" - case $host_os in - mingw*|cygwin*) tagnames="$tagnames,RC" ;; - esac]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - AC_LIBTOOL_LANG_CXX_CONFIG - ;; - - GCJ) - AC_LIBTOOL_LANG_GCJ_CONFIG - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - available_tags="$available_tags $tagname" - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -#- set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the path to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -])# AC_PROG_LD - - -# AC_PROG_LD_GNU -# -------------- -AC_DEFUN([AC_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$lt_cv_prog_gnu_ld -])# AC_PROG_LD_GNU - - -# AC_PROG_LD_RELOAD_FLAG -# ---------------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], - lt_cv_ld_reload_flag, - [lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -])# AC_PROG_LD_RELOAD_FLAG - - -# AC_DEPLIBS_CHECK_METHOD -# ----------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognise dependant libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[[012]]) - lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - if test "$host_cpu" = ia64; then - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - else - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - fi - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; - -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the path to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# If this macro is not defined by Autoconf, define it here. -ifdef([AC_PROVIDE_IFELSE], - [], - [define([AC_PROVIDE_IFELSE], - [ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) -])# _LT_AC_LANG_CXX - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# -------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([AC_PROG_RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='main(){return(0);}' - -_LT_AC_SYS_COMPILER - -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' - ;; - esac -fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_DLOPEN_SELF($1) - -# Report which librarie types wil actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= - -# Source file extension for C test sources. -ac_ext=cc - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int char *[]) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${CXX-"c++"} -set dummy $CC -compiler="[$]2" -_LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ - egrep 'GNU ld' > /dev/null; then - with_gnu_ld=yes - - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - egrep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux*) - if test $with_gnu_ld = no; then - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - else - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - fi - fi - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - else - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - fi - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc) - # Intel C++ - with_gnu_ld=yes - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - cxx) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - # NetBSD uses g++ - do we need to do anything? - ;; - osf3*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | egrep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -# Figure out "hidden" C++ library dependencies from verbose -# compiler output whening linking a shared library. -cat > conftest.$ac_ext <> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "$cfgfile" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments - _LT_AC_FILE_LTDLL_C - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments - _LT_AC_FILE_IMPGEN_C -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[[ABCDGISTW]]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - cygwin* | mingw* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - fi - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - fi - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux*) - if test "$CC" = "icc"; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - fi - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - if test "x$host_vendor" = xsni; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD' - else - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - fi - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC" - ;; -esac -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - cygwin* | mingw* | pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an egrep regular expression of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left by newer dlltools. - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \[$]# in - 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - ;; - esac - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi4*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' - ;; - *) # Darwin 1.3 on - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' - ;; - esac - - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9* | hpux10* | hpux11*) - if test "$GCC" = yes; then - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - esac - else - case $host_os in - hpux9*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - ;; - esac - fi - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - else - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - fi - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - if test "x$host_vendor" = xsni; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac -fi -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_FILE_IMPGEN_C -# -------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_IMPGEN_C], [ -# /* impgen.c starts here */ -# /* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break; - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 10000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" -]) -AC_MSG_RESULT([$SED]) -]) diff --git a/admin/ltmain.sh b/admin/ltmain.sh deleted file mode 100644 index f2a88ef..0000000 --- a/admin/ltmain.sh +++ /dev/null @@ -1,5572 +0,0 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" - -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift - - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - echo "$progname: invalid tag name: $tagname" 1>&2 - exit 1 - ;; - esac - - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" - else - echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - echo - echo "Copyright 1996, 1997, 1998, 1999, 2000, 2001" - echo "Free Software Foundation, Inc." - echo "This is free software; see the source for copying conditions. There is NO" - echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit 0 - ;; - - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" - done - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --preserve-dup-deps) duplicate_deps="yes" ;; - - --quiet | --silent) - show=: - ;; - - --tag) prevopt="--tag" prev=tag ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case $nonopt in - *cc | *++ | gcc* | *-gcc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - prev= - lastarg= - srcfile="$nonopt" - suppress_output= - - user_target=no - for arg - do - case $prev in - "") ;; - xcompiler) - # Aesthetically quote the previous argument. - prev= - lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - - case $arg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - # Accept any command-line options. - case $arg in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; - - -static) - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - - # Add the arguments to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - case $user_target in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $lastarg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - case $user_target in - set) - ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' - case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - *.java) xform=java ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 - ;; - esac - - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. - # Only attempt this if the compiler in the base compile - # command doesn't match the default compiler. - if test -n "$available_tags" && test -z "$tagname"; then - case "$base_compile " in - "$CC "*) ;; - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when ltconfig was run. - "`$echo $CC` "*) ;; - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" - case "$base_compile " in - "$CC "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - "`$echo $CC` "*) - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - echo "$modename: unable to infer tagged configuration" - echo "$modename: specify a tag with \`--tag'" 1>&2 - exit 1 -# else -# echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi - - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi - lobj=${xdir}$objdir/$objname - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $run ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - echo $srcfile > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - - $run $rm "$libobj" "${libobj}T" - - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - else - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - fi - build_libtool_libs=no - build_old_libs=yes - prefer_static_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - base_compile="$base_compile $arg" - shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit 1 - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit 1 - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit 1 - fi - arg=$save_arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit 1 - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - ;; - esac - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 - fi - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-mingw* | *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" - continue - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -static) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - add_flags="$add_flags $arg" - ;; - - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit 1 - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit 1 - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - add_flags="$add_flags $arg" - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done # argument parsing loop - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. - # Only attempt this if the compiler in the base link - # command doesn't match the default compiler. - if test -n "$available_tags" && test -z "$tagname"; then - case $base_compile in - "$CC "*) ;; - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when ltconfig was run. - "`$echo $CC` "*) ;; - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" - case $base_compile in - "$CC "*) - # The compiler in $compile_command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - "`$echo $CC` "*) - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - echo "$modename: unable to infer tagged configuration" - echo "$modename: specify a tag with \`--tag'" 1>&2 - exit 1 -# else -# echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test "$status" -ne 0 && test ! -d "$output_objdir"; then - exit $status - fi - fi - - # Determine the type of output - case $output in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if test "X$duplicate_deps" = "Xyes" ; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - case $linkmode in - lib) - passes="conv link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit 1 - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - for deplib in $libs; do - lib= - found=no - case $deplib in - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 - continue - fi - if test "$pass" = conv && test "$allow_undefined" = yes; then - deplibs="$deplib $deplibs" - continue - fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - # Search the libtool library - lib="$searchdir/lib${name}.la" - if test -f "$lib"; then - found=yes - break - fi - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - ;; # -l - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - ;; - *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - if test "$deplibs_check_method" != pass_all; then - echo - echo "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not used here." - else - echo - echo "*** Warning: Linking the shared library $output against the" - echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit 1 - fi - - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - tmp_libs= - for deplib in $dependency_libs; do - #echo "Adding $deplib to \$deplibs" - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - if test -z "$libdir"; then - if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit 1 - fi - continue - fi # $pass = conv - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit 1 - fi - if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - abs_ladir="$ladir" - fi - ;; - esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit 1 - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - # This is a shared library - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin*) - major=`expr $current - $age` - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - soname=`echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$extract_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$old_archive_from_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - echo "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - #if test -n "$dependency_libs" && - # { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || - # test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - #fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - fi - ;; - esac - if grep "^installed=no" $deplib > /dev/null; then - path="-L$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - path="-L$absdir" - fi - ;; - *) continue ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$deplibs $path" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - -R*) - temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit 1 - else - echo - echo "*** Warning: Linking the shared library $output against the non-libtool" - echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" - - # Check that each of the things are valid numbers. - case $current in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case $revision in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case $age in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - irix | nonstopux) - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - major=`expr $current - $age + 1` - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - major=`expr $current - $age` - versuffix="-$major" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - fi - - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` - done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for file magic test)" - else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a file magic. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for regex pattern test)" - else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a regex pattern. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? - fi - - # Add all flags from the command line. We here create a library, - # but those flags were only added to compile_command and - # finalize_command, which are only used when creating executables. - # So do it by hand here. - compiler_flags="$compiler_flags $add_flags" - # Only add it to commands which use CC, instead of LD, i.e. - # only to $compiler_flags - #linker_flags="$linker_flags $add_flags" - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$save_output-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi - last_robj=$output_objdir/$save_output-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$save_output-${k}.$objext - objlist=$obj - len=1 - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - # Set up a command to remove the reloadale object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" - done - - $echo "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~$rm $delfiles\" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit 0 - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case $output in - *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - ;; - - prog) - case $host in - *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; - esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G - # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath. - # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld. - # This does not apply on AIX for ia64, which uses a SysV linker. - case "$host" in - ia64-*-aix5*) ;; - *-*-aix4* | *-*-aix5*) - compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` - finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;; - esac - - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? - - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi - - exit $status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $run $rm $output - # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit 0 - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case $0 in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) exeext=.exe ;; - *) exeext= ;; - esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # win32 systems need to use the prog path for dll - # lookup to work - *-*-cygwin* | *-*-pw32*) - $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} -" - ;; - - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" - ;; - - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - #oldobjs="$oldobjs$old_deplibs $non_pic_objects" - oldobjs="$old_deplibs $non_pic_objects" - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done - fi - - compiler_flags="$compiler_flags $add_flags" - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - eval cmds=\"$old_archive_cmds\" - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - eval cmds=\"\$concat_cmds~$old_archive_cmds\" - fi - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="($relink_command; cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlfiles="$newdlfiles $libdir/$name" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlprefiles="$newdlprefiles $libdir/$name" - done - dlprefiles="$newdlprefiles" - fi - $rm $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then - $echo >> $output "\ -relink_command=\"$relink_command\"" - fi - done - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $wrapper ;; - *) . ./$wrapper ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyways - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $0 --finish$current_libdirs' - else - exit 0 - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - rmdirs= - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$objdir" - else - objdir="$dir/$objdir" - fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - - if test "$mode" = uninstall; then - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - # FIXME: should reinstall the best remaining shared library. - fi - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - - # Read the .lo file - . $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi - ;; - - *) - # Do a test to see if this is a libtool program. - if test "$mode" = clean && - (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$file - - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - fi - ;; - esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 - done - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 - fi - done - - exit $exit_status - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - fi -fi # test -z "$show_help" - -if test -n "$exec_cmd"; then - eval exec $exec_cmd - exit 1 -fi - -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/admin/missing b/admin/missing deleted file mode 100755 index f8fdc47..0000000 --- a/admin/missing +++ /dev/null @@ -1,336 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. -# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch]" - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing 1.0 - GNU automake" - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - - aclocal*) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the - proper tools for further handling them. - You can get \`$1Help2man' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then - # We have makeinfo, but it failed. - exit 1 - fi - - echo 1>&2 "\ -WARNING: \`$1' is missing on your system. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - tar) - shift - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - fi - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and you do not seem to have it handy on your - system. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequirements for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 diff --git a/admin/mkinstalldirs b/admin/mkinstalldirs deleted file mode 100755 index d2d5f21..0000000 --- a/admin/mkinstalldirs +++ /dev/null @@ -1,111 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Public domain - -errstatus=0 -dirmode="" - -usage="\ -Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" 1>&2 - exit 0 - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -case $dirmode in - '') - if mkdir -p -- . 2>/dev/null; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - fi - ;; - *) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - fi - ;; -esac - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# End: -# mkinstalldirs ends here diff --git a/admin/nmcheck b/admin/nmcheck deleted file mode 100755 index 1544713..0000000 --- a/admin/nmcheck +++ /dev/null @@ -1,371 +0,0 @@ -#!/usr/bin/perl -w - -# Check namespace cleanness of a library. -# Allowed symbols are passed as arguments. -# They may have trailing * = wildcard. -# Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes) -# Symbols are listed as full function unmangled names without arguments, -# e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar() -# and all symbols in namespace/class nspace. -# If an argument has comma in it, it's a filename of a file containing -# allowed symbols, one per line. - - -$thisProg = "$0"; # This programs name - -$library = ""; -$allowed_symbols = ""; -$debug = 0; -$allowed_weak = ""; -$weak_specified = 0; - -while( defined( $ARGV[ 0 ] )) -{ - $_ = shift; - if( /^--verbose$|^-v$/ ) - { - $debug = 1; - } - elsif( /^--help$|^-h$/ ) - { - print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n", - "\n", - "Check if the given library has only allowed public symbols.\n", - "\n", - " --allowweak=[symbol] allow only these weak symbols\n", - " -v, --verbose verbosely list files processed\n", - " -h, --help print this help, then exit\n"; - exit 0; - } - elsif( /^--allowweak=(.*)$/ ) - { - $allowed_weak .= " " . $1; - $weak_specified = 1; - } - elsif( /^--allowweak$/ ) # simply list all weak - { - $allowed_weak .= " "; - $weak_specified = 1; - } - elsif( /^--*/ ) - { - die "Invalid argument!\n"; - } - else - { - if( ! $library ) - { - $library = $_; - } - else - { - $allowed_symbols .= " " . $_; - } - } -} - -if( ! $weak_specified ) -{ - $allowed_weak = "*"; - # allow all weak symbols by default - # instances of templates and similar stuff - unfortunately includes also things from other libraries, - # so it cannot be on by default -} - -print STDERR "library:" . $library . "\n" if $debug; -print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug; -print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug; - -$default_symbols = "_fini _init"; # system symbols -# on my system, every .so has : -# A _DYNAMIC -# A _GLOBAL_OFFSET_TABLE_ -# A __bss_start -# A _edata -# A _end -# T _fini -# T _init -# no need to list A symbols in $default_symbols - -print STDERR "default_symbols: " . $default_symbols . "\n" if $debug; - -print STDOUT "Namespace cleanness check for " . $library . " :\n"; - -$lib_file = ""; -if( $library =~ /\.la$/ ) -{ - # get the real library file from .la - open( FILEIN, $library ) || die "Couldn't open $! !\n"; - while( $line = ) - { - if( $line =~ /library_names=\'([^ ]*).*/o ) - { - $lib_file = $1; - } - } - close( FILEIN ); - if( ! $lib_file ) - { - print STDERR "Library file not found in .la file!\n"; - exit 1; - } - my $libpath = $library; - $libpath =~ s%[^/]*$%%; - if( -e $libpath . ".libs/" . $lib_file ) - { - $lib_file = $libpath . ".libs/" . $lib_file; - } - else - { - $lib_file = $libpath . $lib_file; - } -} -else -{ - $lib_file = $library; -} - -print STDERR "libfile: ". $lib_file . "\n" if $debug; - -$allowed_symbols .= " " . $default_symbols; - -sub process_symbols($\@\%\@); - -@wildcards = (); -%exacts = (); -@regwildcards = (); -process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards ); -@weak_wildcards = (); -%weak_exacts = (); -@weak_regwildcards = (); -process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards ); - -# grep is for stripping not exported symbols, which don't have address (=first column) -$nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |"; - -# TODO how portable is this nmcheck stuff? - -print STDERR "nm command:" . $nm_command . "\n" if $debug; - -open( FILEIN, $nm_command ) || die "nm command failed\n"; - -my $exit_code = 0; - -while( $line = ) -{ - my $type; - my $symbol; - if( $line =~ /^[^ ]* (.) (.*)$/o ) - { - $type = $1; - $symbol = $2; - } - else - { - die "Invalid line: " . $line . "\n"; - } - - print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug; - if( $type eq "A" ) - { # these should be system symbols, so ignore them - next; - } - - my $orig_symbol = $symbol; - - if( $symbol =~ /\(anonymous namespace\)/o ) - { # TODO tell to prefer named namespaces? (shorter symbols) - next; - } - - # strip prefixes - # the :: appending is to make "CLASS::*" work also for "vtable for CLASS" - $symbol =~ s/^typeinfo for (.*)$/$1::/o; - $symbol =~ s/^typeinfo fn for (.*)$/$1::/o; - $symbol =~ s/^typeinfo name for (.*)$/$1::/o; - $symbol =~ s/^vtable for (.*)$/$1::/o; - $symbol =~ s/^guard variable for (.*)$/$1::/o; - $symbol =~ s/^reference temporary for (.*)$/$1::/o; - $symbol =~ s/^VTT for (.*)$/$1::/o; - $symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o; - $symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o; - $symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o; - $symbol =~ s/^construction vtable thunk for (.*)$/$1::/o; - $symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o; - - # templates seem to have also return types mangled in their name, and nm prints it too - # they have also template arguments in the symbol - # get rid of both of those - while( $symbol =~ /<.*>/o ) - { - $symbol =~ s/<[^<>]*>//o; # strip innermost <> - } - if( $symbol !~ /operator\(\)/o ) - { - $symbol =~ s/ ?\(.*\).*$//o; # strip () and all after it - } - else - { - $symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o; # strip () and all after it - } - $symbol =~ s/\[.*\] *$//o; # strip [in-charge] etc. - if( $symbol =~ /(^|:| )operator /o ) - { - $symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah' - } - else - { - $symbol =~ s/.* ([^\s]+) *$/$1/o; # get last word (strip return type) - } - - # print STDERR "Processed symbol: " . $symbol . "\n" if $debug; - - my $found = 0; - if( $exacts{ $symbol } ) - { - $found = 1; - } - if( ! $found ) - { - for my $wild ( @wildcards ) - { - if( index( $symbol, $wild ) == 0 ) - { - $found = 1; - last; - } - } - } - if( ! $found ) - { - for my $wild ( @regwildcards ) - { - if( $symbol =~ /^$wild$/ ) - { - $found = 1; - last; - } - } - } - if( ( ! $found ) && ( $type eq "W" || $type eq "V" )) - { - if( $weak_exacts{ $symbol } ) - { - $found = 1; - } - if( ! $found ) - { - for my $wild ( @weak_wildcards ) - { - if( index( $symbol, $wild ) == 0 ) - { - $found = 1; - last; - } - } - } - if( ! $found ) - { - for my $wild ( @weak_regwildcards ) - { - if( $symbol =~ /^$wild$/ ) - { - $found = 1; - last; - } - } - } - } - - if( ! $found ) - { - print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n"; - $exit_code = 1; - } -} - -close( FILEIN ); - -print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n"; - -exit $exit_code; - -sub process_symbols($\@\%\@) -{ - my $allowed_symbols = $_[ 0 ]; - my $wildcards_ref = $_[ 1 ]; - my $exacts_ref = $_[ 2 ]; - my $regwildcards_ref = $_[ 3 ]; - - $allowed_symbols =~ s/^ *//o; # strip whitespace - $allowed_symbols =~ s/ *$//o; - - if( $allowed_symbols eq "NONE" ) - { - $allowed_symbols = ""; - } - - my @symbols1 = split( ' ', $allowed_symbols ); - my $i = 0; - my @symbols2 = (); - while( defined( $symbols1[ $i ] )) - { - my $symbol = $symbols1[ $i ]; - if( $symbol =~ /\./ ) # dot in name -> file - { - open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" ); - while( $line = ) - { - $line =~ s/^\s*//o; # strip whitespace - $line =~ s/\s*$//o; - if( $line !~ /^$/o # empty line - && $line !~ /^\s*#/ ) # comment line starting with # - { - $symbols2[ $#symbols2 + 1 ] = $line; - } - } - close( SYMIN ); - } - else - { - $symbols2[ $#symbols2 + 1 ] = $symbol; - } - $i++; - } - $i = 0; - while( defined( $symbols2[ $i ] )) - { - my $symbol = $symbols2[ $i ]; - if( $symbol =~ /__/ - || $symbol =~ /^_[A-Z]/ ) - { # ISO C++ 2.10.2 - die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n"; - } - elsif( $symbol eq "main" - || $symbol eq "main*" ) - { - die "Symbol main is not allowed!\n"; - } - if( $symbol =~ /^([^\*]*)\*$/o # trailing * without any * before it - && $symbol !~ /operator\*$/o ) - { - print STDERR "wildcard:" . $symbol . "\n" if $debug; - $wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1; - } - elsif( $symbol =~ /\*$/o - && ( $symbol =~ /\*::/o || $symbol =~ /::\*/o ) - && $symbol !~ /^\*/o - && $symbol !~ /operator\*$/o ) - { - print STDERR "regwildcard:" . $symbol . "\n" if $debug; - $symbol =~ s/\*/\.\*/go; # change * to .* (regexp) - $regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol; - } - else - { - print STDERR "exact:" . $symbol . "\n" if $debug; - $exacts_ref->{ $symbol } = 1; - } - $i++; - } -} diff --git a/admin/ylwrap b/admin/ylwrap deleted file mode 100755 index 5ea68e4..0000000 --- a/admin/ylwrap +++ /dev/null @@ -1,143 +0,0 @@ -#! /bin/sh -# ylwrap - wrapper for lex/yacc invocations. -# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Usage: -# ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]... -# * INPUT is the input file -# * OUTPUT is file PROG generates -# * DESIRED is file we actually want -# * PROGRAM is program to run -# * ARGS are passed to PROG -# Any number of OUTPUT,DESIRED pairs may be used. - -# The input. -input="$1" -shift -case "$input" in - [\\/]* | ?:[\\/]*) - # Absolute path; do nothing. - ;; - *) - # Relative path. Make it absolute. - input="`pwd`/$input" - ;; -esac - -# The directory holding the input. -input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'` -# Quote $INPUT_DIR so we can use it in a regexp. -# FIXME: really we should care about more than `.' and `\'. -input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'` - -echo "got $input_rx" - -pairlist= -while test "$#" -ne 0; do - if test "$1" = "--"; then - shift - break - fi - pairlist="$pairlist $1" - shift -done - -# The program to run. -prog="$1" -shift -# Make any relative path in $prog absolute. -case "$prog" in - [\\/]* | ?:[\\/]*) ;; - *[\\/]*) prog="`pwd`/$prog" ;; -esac - -# FIXME: add hostname here for parallel makes that run commands on -# other machines. But that might take us over the 14-char limit. -dirname=ylwrap$$ -trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15 -mkdir $dirname || exit 1 - -cd $dirname - -$prog ${1+"$@"} "$input" -status=$? - -if test $status -eq 0; then - set X $pairlist - shift - first=yes - # Since DOS filename conventions don't allow two dots, - # the DOS version of Bison writes out y_tab.c instead of y.tab.c - # and y_tab.h instead of y.tab.h. Test to see if this is the case. - y_tab_nodot="no" - if test -f y_tab.c || test -f y_tab.h; then - y_tab_nodot="yes" - fi - - while test "$#" -ne 0; do - from="$1" - # Handle y_tab.c and y_tab.h output by DOS - if test $y_tab_nodot = "yes"; then - if test $from = "y.tab.c"; then - from="y_tab.c" - else - if test $from = "y.tab.h"; then - from="y_tab.h" - fi - fi - fi - if test -f "$from"; then - # If $2 is an absolute path name, then just use that, - # otherwise prepend `../'. - case "$2" in - [\\/]* | ?:[\\/]*) target="$2";; - *) target="../$2";; - esac - - # Edit out `#line' or `#' directives. We don't want the - # resulting debug information to point at an absolute srcdir; - # it is better for it to just mention the .y file with no - # path. - sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$? - else - # A missing file is only an error for the first file. This - # is a blatant hack to let us support using "yacc -d". If -d - # is not specified, we don't want an error when the header - # file is "missing". - if test $first = yes; then - status=1 - fi - fi - shift - shift - first=no - done -else - status=$? -fi - -# Remove the directory. -cd .. -rm -rf $dirname - -exit $status diff --git a/colorscheme/CMakeLists.txt b/colorscheme/CMakeLists.txt new file mode 100644 index 0000000..d1988a9 --- /dev/null +++ b/colorscheme/CMakeLists.txt @@ -0,0 +1,18 @@ +################################################################################ +# twin-style-mallory # +# ------------------ # +# This file is licensed under the terms of GNU GPL v3 or later. # +# Improvements and feedback are welcome. # +################################################################################ + +### Data ####################################################################### +install( + FILES + Mallory-1.0-Caramel.kcsrc Mallory-1.0-Double.Blue.kcsrc + Mallory-1.0-Double.Grey.kcsrc Mallory-1.0-Flat.Blue.kcsrc + Mallory-1.0-Flat.Green.kcsrc Mallory-1.0-Flat.Grey.kcsrc + Mallory-1.0-Flat.Sands.kcsrc Mallory-1.0-Green.Halo.kcsrc + Mallory-1.0-It.s.A.Boy.kcsrc Mallory-1.0-It.s.A.Girl.kcsrc + Mallory-1.0-Nenuphars.kcsrc + DESTINATION ${DATA_INSTALL_DIR}/tdedisplay/color-schemes +) \ No newline at end of file diff --git a/config.h b/config.h deleted file mode 100644 index b832273..0000000 --- a/config.h +++ /dev/null @@ -1,197 +0,0 @@ -/* config.h. Generated by configure. */ -/* config.h.in. Generated from configure.in by autoheader. */ - -/* Define if you have the CoreAudio API */ -/* #undef HAVE_COREAUDIO */ - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_CRT_EXTERNS_H */ - -/* Defines if your system has the crypt function */ -#define HAVE_CRYPT 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_DLFCN_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_INTTYPES_H 1 - -/* Define if you have libjpeg */ -#define HAVE_LIBJPEG 1 - -/* Define if you have libpng */ -#define HAVE_LIBPNG 1 - -/* Define if you have a working libpthread (will enable threaded code) */ -#define HAVE_LIBPTHREAD 1 - -/* Define if you have libz */ -#define HAVE_LIBZ 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_MEMORY_H 1 - -/* Define if your system needs _NSGetEnviron to set up the environment */ -/* #undef HAVE_NSGETENVIRON */ - -/* Define to 1 if you have the header file. - */ -/* #undef HAVE_PTHREAD_LINUXTHREADS_PTHREAD_H */ - -/* Define if you have the res_init function */ -#define HAVE_RES_INIT 1 - -/* Define to 1 if you have the `snprintf' function. */ -#define HAVE_SNPRINTF 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRING_H 1 - -/* Define if you have strlcat */ -/* #undef HAVE_STRLCAT */ - -/* Define if you have the strlcat prototype */ -/* #undef HAVE_STRLCAT_PROTO */ - -/* Define if you have strlcpy */ -/* #undef HAVE_STRLCPY */ - -/* Define if you have the strlcpy prototype */ -/* #undef HAVE_STRLCPY_PROTO */ - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_UNISTD_H 1 - -/* Define to 1 if you have the `vsnprintf' function. */ -#define HAVE_VSNPRINTF 1 - -/* Suffix for lib directories */ -#define KDELIBSUFF "" - -/* Name of package */ -#define PACKAGE "mallory" - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "" - -/* The size of a `char *', as computed by sizeof. */ -#define SIZEOF_CHAR_P 4 - -/* The size of a `int', as computed by sizeof. */ -#define SIZEOF_INT 4 - -/* The size of a `long', as computed by sizeof. */ -#define SIZEOF_LONG 4 - -/* The size of a `size_t', as computed by sizeof. */ -#define SIZEOF_SIZE_T 4 - -/* The size of a `unsigned long', as computed by sizeof. */ -#define SIZEOF_UNSIGNED_LONG 4 - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Version number of package */ -#define VERSION "1.0" - -/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif - - - -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif - - - -#if !defined(HAVE_STRLCAT_PROTO) -#ifdef __cplusplus -extern "C" -#endif -unsigned long strlcat(char*, const char*, unsigned long); -#endif - - - -#if !defined(HAVE_STRLCPY_PROTO) -#ifdef __cplusplus -extern "C" -#endif -unsigned long strlcpy(char*, const char*, unsigned long); -#endif - - - -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif - - - -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif - - -/* Compatibility define */ -#define ksize_t socklen_t - -/* Define the real type of socklen_t */ -/* #undef socklen_t */ diff --git a/config.h.cmake b/config.h.cmake new file mode 100644 index 0000000..1370df9 --- /dev/null +++ b/config.h.cmake @@ -0,0 +1,8 @@ +#define VERSION "@VERSION@" + +// Defined if you have fvisibility and fvisibility-inlines-hidden support. +#cmakedefine __KDE_HAVE_GCC_VISIBILITY 1 + +/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most + significant byte first (like Motorola and SPARC, unlike Intel). */ +#cmakedefine WORDS_BIGENDIAN @WORDS_BIGENDIAN@ \ No newline at end of file diff --git a/config.h.in b/config.h.in deleted file mode 100644 index fc94a9a..0000000 --- a/config.h.in +++ /dev/null @@ -1,196 +0,0 @@ -/* config.h.in. Generated from configure.in by autoheader. */ - -/* Define if you have the CoreAudio API */ -#undef HAVE_COREAUDIO - -/* Define to 1 if you have the header file. */ -#undef HAVE_CRT_EXTERNS_H - -/* Defines if your system has the crypt function */ -#undef HAVE_CRYPT - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define if you have libjpeg */ -#undef HAVE_LIBJPEG - -/* Define if you have libpng */ -#undef HAVE_LIBPNG - -/* Define if you have a working libpthread (will enable threaded code) */ -#undef HAVE_LIBPTHREAD - -/* Define if you have libz */ -#undef HAVE_LIBZ - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define if your system needs _NSGetEnviron to set up the environment */ -#undef HAVE_NSGETENVIRON - -/* Define to 1 if you have the header file. - */ -#undef HAVE_PTHREAD_LINUXTHREADS_PTHREAD_H - -/* Define if you have the res_init function */ -#undef HAVE_RES_INIT - -/* Define to 1 if you have the `snprintf' function. */ -#undef HAVE_SNPRINTF - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define if you have strlcat */ -#undef HAVE_STRLCAT - -/* Define if you have the strlcat prototype */ -#undef HAVE_STRLCAT_PROTO - -/* Define if you have strlcpy */ -#undef HAVE_STRLCPY - -/* Define if you have the strlcpy prototype */ -#undef HAVE_STRLCPY_PROTO - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the `vsnprintf' function. */ -#undef HAVE_VSNPRINTF - -/* Suffix for lib directories */ -#undef KDELIBSUFF - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* The size of a `char *', as computed by sizeof. */ -#undef SIZEOF_CHAR_P - -/* The size of a `int', as computed by sizeof. */ -#undef SIZEOF_INT - -/* The size of a `long', as computed by sizeof. */ -#undef SIZEOF_LONG - -/* The size of a `size_t', as computed by sizeof. */ -#undef SIZEOF_SIZE_T - -/* The size of a `unsigned long', as computed by sizeof. */ -#undef SIZEOF_UNSIGNED_LONG - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION - -/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif - - - -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif - - - -#if !defined(HAVE_STRLCAT_PROTO) -#ifdef __cplusplus -extern "C" -#endif -unsigned long strlcat(char*, const char*, unsigned long); -#endif - - - -#if !defined(HAVE_STRLCPY_PROTO) -#ifdef __cplusplus -extern "C" -#endif -unsigned long strlcpy(char*, const char*, unsigned long); -#endif - - - -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif - - - -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif - - -/* Compatibility define */ -#undef ksize_t - -/* Define the real type of socklen_t */ -#undef socklen_t diff --git a/config.log b/config.log deleted file mode 100644 index f6ded39..0000000 --- a/config.log +++ /dev/null @@ -1,2225 +0,0 @@ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by configure, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ ./configure --prefix=/opt/kde3 - -## --------- ## -## Platform. ## -## --------- ## - -hostname = tinbox -uname -m = i686 -uname -r = 2.6.8-24.11-default -uname -s = Linux -uname -v = #1 Fri Jan 14 13:01:26 UTC 2005 - -/usr/bin/uname -p = unknown -/bin/uname -X = unknown - -/bin/arch = i686 -/usr/bin/arch -k = unknown -/usr/convex/getsysinfo = unknown -hostinfo = unknown -/bin/machine = unknown -/usr/bin/oslevel = unknown -/bin/universe = unknown - -PATH: /home/maxilys/bin -PATH: /usr/local/bin -PATH: /usr/bin -PATH: /usr/X11R6/bin -PATH: /bin -PATH: /usr/games -PATH: /opt/gnome/bin -PATH: /opt/kde3/bin - - -## ----------- ## -## Core tests. ## -## ----------- ## - -configure:1543: checking build system type -configure:1561: result: i686-pc-linux-gnu -configure:1569: checking host system type -configure:1583: result: i686-pc-linux-gnu -configure:1591: checking target system type -configure:1605: result: i686-pc-linux-gnu -configure:1652: checking for a BSD-compatible install -configure:1707: result: /usr/bin/install -c -configure:1722: checking for -p flag to install -configure:1735: result: yes -configure:1746: checking whether build environment is sane -configure:1789: result: yes -configure:1809: checking for gawk -configure:1825: found /usr/bin/gawk -configure:1835: result: gawk -configure:1845: checking whether make sets $(MAKE) -configure:1865: result: yes -configure:2071: checking for style of include used by make -configure:2099: result: GNU -configure:2246: checking for gcc -configure:2262: found /usr/bin/gcc -configure:2272: result: gcc -configure:2516: checking for C compiler version -configure:2519: gcc --version &5 -gcc (GCC) 3.3.4 (pre 3.3.5 20040809) -Copyright (C) 2003 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -configure:2522: $? = 0 -configure:2524: gcc -v &5 -Reading specs from /usr/lib/gcc-lib/i586-suse-linux/3.3.4/specs -Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i586-suse-linux -Thread model: posix -gcc version 3.3.4 (pre 3.3.5 20040809) -configure:2527: $? = 0 -configure:2529: gcc -V &5 -gcc: `-V' option must have argument -configure:2532: $? = 1 -configure:2555: checking for C compiler default output file name -configure:2558: gcc conftest.c >&5 -configure:2561: $? = 0 -configure:2607: result: a.out -configure:2612: checking whether the C compiler works -configure:2618: ./a.out -configure:2621: $? = 0 -configure:2638: result: yes -configure:2645: checking whether we are cross compiling -configure:2647: result: no -configure:2650: checking for suffix of executables -configure:2652: gcc -o conftest conftest.c >&5 -configure:2655: $? = 0 -configure:2680: result: -configure:2686: checking for suffix of object files -configure:2707: gcc -c conftest.c >&5 -configure:2710: $? = 0 -configure:2732: result: o -configure:2736: checking whether we are using the GNU C compiler -configure:2760: gcc -c conftest.c >&5 -configure:2766: $? = 0 -configure:2770: test -z - || test ! -s conftest.err -configure:2773: $? = 0 -configure:2776: test -s conftest.o -configure:2779: $? = 0 -configure:2792: result: yes -configure:2798: checking whether gcc accepts -g -configure:2819: gcc -c -g conftest.c >&5 -configure:2825: $? = 0 -configure:2829: test -z - || test ! -s conftest.err -configure:2832: $? = 0 -configure:2835: test -s conftest.o -configure:2838: $? = 0 -configure:2849: result: yes -configure:2866: checking for gcc option to accept ANSI C -configure:2936: gcc -c conftest.c >&5 -configure:2942: $? = 0 -configure:2946: test -z - || test ! -s conftest.err -configure:2949: $? = 0 -configure:2952: test -s conftest.o -configure:2955: $? = 0 -configure:2973: result: none needed -configure:2991: gcc -c conftest.c >&5 -conftest.c:2: error: parse error before "me" -configure:2997: $? = 1 -configure: failed program was: -| #ifndef __cplusplus -| choke me -| #endif -configure:3132: checking dependency style of gcc -configure:3194: result: gcc3 -configure:3205: checking how to run the C preprocessor -configure:3240: gcc -E conftest.c -configure:3246: $? = 0 -configure:3278: gcc -E conftest.c -conftest.c:11:28: ac_nonexistent.h: No such file or directory -configure:3284: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| /* end confdefs.h. */ -| #include -configure:3323: result: gcc -E -configure:3347: gcc -E conftest.c -configure:3353: $? = 0 -configure:3385: gcc -E conftest.c -conftest.c:11:28: ac_nonexistent.h: No such file or directory -configure:3391: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| /* end confdefs.h. */ -| #include -configure:3515: checking for g++ -configure:3531: found /usr/bin/g++ -configure:3541: result: g++ -configure:3557: checking for C++ compiler version -configure:3560: g++ --version &5 -g++ (GCC) 3.3.4 (pre 3.3.5 20040809) -Copyright (C) 2003 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -configure:3563: $? = 0 -configure:3565: g++ -v &5 -Reading specs from /usr/lib/gcc-lib/i586-suse-linux/3.3.4/specs -Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i586-suse-linux -Thread model: posix -gcc version 3.3.4 (pre 3.3.5 20040809) -configure:3568: $? = 0 -configure:3570: g++ -V &5 -g++: `-V' option must have argument -configure:3573: $? = 1 -configure:3576: checking whether we are using the GNU C++ compiler -configure:3600: g++ -c conftest.cc >&5 -configure:3606: $? = 0 -configure:3610: test -z - || test ! -s conftest.err -configure:3613: $? = 0 -configure:3616: test -s conftest.o -configure:3619: $? = 0 -configure:3632: result: yes -configure:3638: checking whether g++ accepts -g -configure:3659: g++ -c -g conftest.cc >&5 -configure:3665: $? = 0 -configure:3669: test -z - || test ! -s conftest.err -configure:3672: $? = 0 -configure:3675: test -s conftest.o -configure:3678: $? = 0 -configure:3689: result: yes -configure:3731: g++ -c conftest.cc >&5 -configure:3737: $? = 0 -configure:3741: test -z - || test ! -s conftest.err -configure:3744: $? = 0 -configure:3747: test -s conftest.o -configure:3750: $? = 0 -configure:3776: g++ -c conftest.cc >&5 -conftest.cc: In function `int main()': -conftest.cc:15: error: `exit' undeclared (first use this function) -conftest.cc:15: error: (Each undeclared identifier is reported only once for - each function it appears in.) -configure:3782: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| /* end confdefs.h. */ -| -| int -| main () -| { -| exit (42); -| ; -| return 0; -| } -configure:3731: g++ -c conftest.cc >&5 -configure:3737: $? = 0 -configure:3741: test -z - || test ! -s conftest.err -configure:3744: $? = 0 -configure:3747: test -s conftest.o -configure:3750: $? = 0 -configure:3776: g++ -c conftest.cc >&5 -configure:3782: $? = 0 -configure:3786: test -z - || test ! -s conftest.err -configure:3789: $? = 0 -configure:3792: test -s conftest.o -configure:3795: $? = 0 -configure:3820: checking dependency style of g++ -configure:3882: result: gcc3 -configure:4193: checking whether g++ supports -Wmissing-format-attribute -configure:4229: rm -rf SunWS_cache; g++ -o conftest -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wmissing-format-attribute conftest.cc 1>&5 -cc1plus: warning: -Wmissing-format-attribute ignored without -Wformat -configure:4235: $? = 0 -configure:4239: test -z - || test ! -s conftest.err -configure:4242: $? = 0 -configure:4245: test -s conftest -configure:4248: $? = 0 -configure:4269: result: yes -configure:4284: checking whether g++ supports -Wundef -configure:4320: rm -rf SunWS_cache; g++ -o conftest -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -Wundef conftest.cc 1>&5 -configure:4326: $? = 0 -configure:4330: test -z - || test ! -s conftest.err -configure:4333: $? = 0 -configure:4336: test -s conftest -configure:4339: $? = 0 -configure:4360: result: yes -configure:4372: checking whether g++ supports -Wno-long-long -configure:4408: rm -rf SunWS_cache; g++ -o conftest -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -Wno-long-long conftest.cc 1>&5 -configure:4414: $? = 0 -configure:4418: test -z - || test ! -s conftest.err -configure:4421: $? = 0 -configure:4424: test -s conftest -configure:4427: $? = 0 -configure:4448: result: yes -configure:4460: checking whether g++ supports -Wnon-virtual-dtor -configure:4496: rm -rf SunWS_cache; g++ -o conftest -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -Wnon-virtual-dtor conftest.cc 1>&5 -configure:4502: $? = 0 -configure:4506: test -z - || test ! -s conftest.err -configure:4509: $? = 0 -configure:4512: test -s conftest -configure:4515: $? = 0 -configure:4536: result: yes -configure:4556: checking whether g++ supports -fno-exceptions -configure:4592: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions conftest.cc 1>&5 -configure:4598: $? = 0 -configure:4602: test -z - || test ! -s conftest.err -configure:4605: $? = 0 -configure:4608: test -s conftest -configure:4611: $? = 0 -configure:4632: result: yes -configure:4644: checking whether g++ supports -fno-check-new -configure:4680: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new conftest.cc 1>&5 -configure:4686: $? = 0 -configure:4690: test -z - || test ! -s conftest.err -configure:4693: $? = 0 -configure:4696: test -s conftest -configure:4699: $? = 0 -configure:4720: result: yes -configure:4732: checking whether g++ supports -fno-common -configure:4768: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common conftest.cc 1>&5 -configure:4774: $? = 0 -configure:4778: test -z - || test ! -s conftest.err -configure:4781: $? = 0 -configure:4784: test -s conftest -configure:4787: $? = 0 -configure:4808: result: yes -configure:4820: checking whether g++ supports -fexceptions -configure:4856: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -fexceptions conftest.cc 1>&5 -configure:4862: $? = 0 -configure:4866: test -z - || test ! -s conftest.err -configure:4869: $? = 0 -configure:4872: test -s conftest -configure:4875: $? = 0 -configure:4896: result: yes -configure:5557: checking how to run the C++ preprocessor -configure:5588: g++ -E conftest.cc -configure:5594: $? = 0 -configure:5626: g++ -E conftest.cc -conftest.cc:14:28: ac_nonexistent.h: No such file or directory -configure:5632: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| /* end confdefs.h. */ -| #include -configure:5671: result: g++ -E -configure:5695: g++ -E conftest.cc -configure:5701: $? = 0 -configure:5733: g++ -E conftest.cc -conftest.cc:14:28: ac_nonexistent.h: No such file or directory -configure:5739: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| /* end confdefs.h. */ -| #include -configure:5787: checking whether g++ supports -O0 -configure:5823: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -O0 conftest.cc 1>&5 -configure:5829: $? = 0 -configure:5833: test -z - || test ! -s conftest.err -configure:5836: $? = 0 -configure:5839: test -s conftest -configure:5842: $? = 0 -configure:5863: result: yes -configure:6179: result: not using lib directory suffix -configure:6235: checking for ld used by GCC -configure:6299: result: /usr/i586-suse-linux/bin/ld -configure:6308: checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld -GNU ld version 2.15.91.0.2 20040727 (SuSE Linux) -configure:6320: result: yes -configure:6325: checking for /usr/i586-suse-linux/bin/ld option to reload object files -configure:6332: result: -r -configure:6341: checking for BSD-compatible nm -configure:6376: result: /usr/bin/nm -B -configure:6380: checking for a sed that does not truncate output -configure:6456: result: -configure:6459: checking whether ln -s works -configure:6463: result: yes -configure:6470: checking how to recognise dependant libraries -configure:6660: result: pass_all -configure:6730: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:6733: $? = 0 -configure:6829: checking for egrep -configure:6839: result: grep -E -configure:6844: checking for ANSI C header files -configure:6869: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:6875: $? = 0 -configure:6879: test -z - || test ! -s conftest.err -configure:6882: $? = 0 -configure:6885: test -s conftest.o -configure:6888: $? = 0 -configure:6977: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c: In function `main': -conftest.c:32: warning: implicit declaration of function `exit' -configure:6980: $? = 0 -configure:6982: ./conftest -configure:6985: $? = 0 -configure:7000: result: yes -configure:7024: checking for sys/types.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for sys/stat.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for stdlib.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for string.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for memory.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for strings.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for inttypes.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for stdint.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7024: checking for unistd.h -configure:7040: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7046: $? = 0 -configure:7050: test -z - || test ! -s conftest.err -configure:7053: $? = 0 -configure:7056: test -s conftest.o -configure:7059: $? = 0 -configure:7070: result: yes -configure:7096: checking dlfcn.h usability -configure:7108: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:7114: $? = 0 -configure:7118: test -z - || test ! -s conftest.err -configure:7121: $? = 0 -configure:7124: test -s conftest.o -configure:7127: $? = 0 -configure:7137: result: yes -configure:7141: checking dlfcn.h presence -configure:7151: gcc -E conftest.c -configure:7157: $? = 0 -configure:7177: result: yes -configure:7212: checking for dlfcn.h -configure:7219: result: yes -configure:7236: checking the maximum length of command line arguments -configure:7284: result: 32768 -configure:7295: checking command to parse /usr/bin/nm -B output from gcc object -configure:7380: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:5: warning: no previous prototype for `nm_test_func' -configure:7383: $? = 0 -configure:7387: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' \> conftest.nm -configure:7390: $? = 0 -configure:7442: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c conftstm.o >&5 -configure:7445: $? = 0 -configure:7483: result: ok -configure:7487: checking for objdir -configure:7502: result: .libs -configure:7592: checking for ranlib -configure:7608: found /usr/bin/ranlib -configure:7619: result: ranlib -configure:7672: checking for strip -configure:7688: found /usr/bin/strip -configure:7699: result: strip -configure:7962: checking if gcc static flag works -conftest.c:1: warning: return type defaults to `int' -configure:7985: result: no -configure:8002: checking if gcc supports -fno-rtti -fno-exceptions -cc1: warning: "-fno-rtti" is valid for C++ but not for C/ObjC -cc1: warning: "-fno-rtti" is valid for C++ but not for C/ObjC -configure:8026: result: no -configure:8041: checking for gcc option to produce PIC -configure:8202: result: -fPIC -configure:8209: checking if gcc PIC flag -fPIC works -configure:8233: result: yes -configure:8257: checking if gcc supports -c -o file.o -configure:8298: result: yes -configure:8324: checking whether the gcc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries -configure:9127: result: yes -configure:9149: checking whether -lc should be explicitly linked in -configure:9154: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:1: warning: `dummy' defined but not used -configure:9157: $? = 0 -configure:9171: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1 -configure:9174: $? = 0 -configure:9186: result: no -configure:9192: checking how to hardcode library paths into programs -configure:9216: result: immediate -configure:9230: checking whether stripping libraries is possible -configure:9235: result: yes -configure:9242: checking dynamic linker characteristics -configure:9694: result: GNU/Linux ld.so -configure:10423: checking if libtool supports shared libraries -configure:10425: result: yes -configure:10428: checking whether to build shared libraries -configure:10449: result: yes -configure:10452: checking whether to build static libraries -configure:10456: result: no -configure:10535: creating libtool -configure:11260: checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries -configure:11945: result: yes -configure:11962: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common conftest.cc >&5 -configure:11965: $? = 0 -configure:12065: checking for g++ option to produce PIC -configure:12307: result: -fPIC -configure:12314: checking if g++ PIC flag -fPIC works -configure:12338: result: yes -configure:12362: checking if g++ supports -c -o file.o -configure:12403: result: yes -configure:12429: checking whether the g++ linker (/usr/i586-suse-linux/bin/ld) supports shared libraries -configure:12451: result: yes -configure:12473: checking whether -lc should be explicitly linked in -configure:12478: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common conftest.cc >&5 -conftest.cc:1: warning: `int dummy' defined but not used -configure:12481: $? = 0 -configure:12495: g++ -shared -nostdlib conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1 -configure:12498: $? = 1 -configure:12510: result: yes -configure:12516: checking how to hardcode library paths into programs -configure:12540: result: immediate -configure:12554: checking whether stripping libraries is possible -configure:12559: result: yes -configure:12566: checking dynamic linker characteristics -configure:13018: result: GNU/Linux ld.so -configure:14163: checking if gcj supports -fno-rtti -fno-exceptions -configure:14187: result: no -configure:14202: checking for gcj option to produce PIC -configure:14363: result: -fPIC -configure:14370: checking if gcj PIC flag -fPIC works -configure:14394: result: no -configure:14418: checking if gcj supports -c -o file.o -configure:14459: result: no -configure:14485: checking whether the gcj linker (/usr/i586-suse-linux/bin/ld) supports shared libraries -configure:15288: result: yes -configure:15310: checking whether -lc should be explicitly linked in -configure:15315: gcj -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.java >&5 -gcj: can't specify `-D' without `--main' - -configure:15318: $? = 1 -configure:15347: result: yes -configure:15353: checking how to hardcode library paths into programs -configure:15377: result: immediate -configure:15391: checking whether stripping libraries is possible -configure:15396: result: yes -configure:15403: checking dynamic linker characteristics -configure:15855: result: GNU/Linux ld.so -configure:17476: checking for msgfmt -configure:17503: result: /usr/bin/msgfmt -configure:17512: checking for gmsgfmt -configure:17543: result: /usr/bin/msgfmt -configure:17562: checking for xgettext -configure:17589: result: /usr/bin/xgettext -configure:17683: checking for strlcat -configure:17731: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -pedantic-errors conftest.cc >&5 -conftest.cc: In function `int main()': -conftest.cc:37: error: `strlcat' undeclared (first use this function) -conftest.cc:37: error: (Each undeclared identifier is reported only once for - each function it appears in.) -configure:17737: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| /* end confdefs.h. */ -| -| -| #include -| -| -| int -| main () -| { -| -| char buf[20]; -| buf[0]='\0'; -| strlcat(buf, "KDE function test", sizeof(buf)); -| -| -| ; -| return 0; -| } -configure:17772: result: no -configure:17775: checking if strlcat needs custom prototype -configure:17879: result: yes - in libtdefakes -configure:17904: checking for strlcpy -configure:17951: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -pedantic-errors conftest.cc >&5 -conftest.cc: In function `int main()': -conftest.cc:36: error: `strlcpy' undeclared (first use this function) -conftest.cc:36: error: (Each undeclared identifier is reported only once for - each function it appears in.) -configure:17957: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| /* end confdefs.h. */ -| -| -| #include -| -| -| int -| main () -| { -| -| char buf[20]; -| strlcpy(buf, "KDE function test", sizeof(buf)); -| -| -| ; -| return 0; -| } -configure:17992: result: no -configure:17995: checking if strlcpy needs custom prototype -configure:18098: result: yes - in libtdefakes -configure:18128: checking for main in -lutil -configure:18152: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lutil >&5 -configure:18158: $? = 0 -configure:18162: test -z - || test ! -s conftest.err -configure:18165: $? = 0 -configure:18168: test -s conftest -configure:18171: $? = 0 -configure:18184: result: yes -configure:18190: checking for main in -lcompat -configure:18214: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lcompat >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lcompat -collect2: ld returned 1 exit status -configure:18220: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| /* end confdefs.h. */ -| -| -| int -| main () -| { -| main (); -| ; -| return 0; -| } -configure:18246: result: no -configure:18253: checking for crypt in -lcrypt -configure:18283: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lcrypt >&5 -configure:18289: $? = 0 -configure:18293: test -z - || test ! -s conftest.err -configure:18296: $? = 0 -configure:18299: test -s conftest -configure:18302: $? = 0 -configure:18315: result: yes -configure:18409: checking for socklen_t -configure:18448: g++ -c -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common conftest.cc >&5 -configure:18454: $? = 0 -configure:18458: test -z - || test ! -s conftest.err -configure:18461: $? = 0 -configure:18464: test -s conftest.o -configure:18467: $? = 0 -configure:18539: result: socklen_t -configure:18561: checking for dnet_ntoa in -ldnet -configure:18591: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -ldnet >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ldnet -collect2: ld returned 1 exit status -configure:18597: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| /* end confdefs.h. */ -| -| /* Override any gcc2 internal prototype to avoid an error. */ -| #ifdef __cplusplus -| extern "C" -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| char dnet_ntoa (); -| int -| main () -| { -| dnet_ntoa (); -| ; -| return 0; -| } -configure:18623: result: no -configure:18630: checking for dnet_ntoa in -ldnet_stub -configure:18660: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -ldnet_stub >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ldnet_stub -collect2: ld returned 1 exit status -configure:18666: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| /* end confdefs.h. */ -| -| /* Override any gcc2 internal prototype to avoid an error. */ -| #ifdef __cplusplus -| extern "C" -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| char dnet_ntoa (); -| int -| main () -| { -| dnet_ntoa (); -| ; -| return 0; -| } -configure:18692: result: no -configure:18699: checking for inet_ntoa -configure:18756: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:18762: $? = 0 -configure:18766: test -z - || test ! -s conftest.err -configure:18769: $? = 0 -configure:18772: test -s conftest -configure:18775: $? = 0 -configure:18787: result: yes -configure:18860: checking for connect -configure:18917: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:18923: $? = 0 -configure:18927: test -z - || test ! -s conftest.err -configure:18930: $? = 0 -configure:18933: test -s conftest -configure:18936: $? = 0 -configure:18948: result: yes -configure:19022: checking for remove -configure:19079: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:19085: $? = 0 -configure:19089: test -z - || test ! -s conftest.err -configure:19092: $? = 0 -configure:19095: test -s conftest -configure:19098: $? = 0 -configure:19110: result: yes -configure:19185: checking for shmat -configure:19242: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:19248: $? = 0 -configure:19252: test -z - || test ! -s conftest.err -configure:19255: $? = 0 -configure:19258: test -s conftest -configure:19261: $? = 0 -configure:19273: result: yes -configure:19364: checking crt_externs.h usability -configure:19376: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:62:25: crt_externs.h: No such file or directory -configure:19382: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| /* end confdefs.h. */ -| #include -| #if HAVE_SYS_TYPES_H -| # include -| #endif -| #if HAVE_SYS_STAT_H -| # include -| #endif -| #if STDC_HEADERS -| # include -| # include -| #else -| # if HAVE_STDLIB_H -| # include -| # endif -| #endif -| #if HAVE_STRING_H -| # if !STDC_HEADERS && HAVE_MEMORY_H -| # include -| # endif -| # include -| #endif -| #if HAVE_STRINGS_H -| # include -| #endif -| #if HAVE_INTTYPES_H -| # include -| #else -| # if HAVE_STDINT_H -| # include -| # endif -| #endif -| #if HAVE_UNISTD_H -| # include -| #endif -| #include -configure:19405: result: no -configure:19409: checking crt_externs.h presence -configure:19419: gcc -E conftest.c -conftest.c:28:25: crt_externs.h: No such file or directory -configure:19425: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| /* end confdefs.h. */ -| #include -configure:19445: result: no -configure:19480: checking for crt_externs.h -configure:19487: result: no -configure:19500: checking for _NSGetEnviron -configure:19557: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -/tmp/ccSZFgpz.o(.text+0x11): In function `main': -: undefined reference to `_NSGetEnviron' -/tmp/ccSZFgpz.o(.data+0x0): undefined reference to `_NSGetEnviron' -collect2: ld returned 1 exit status -configure:19563: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| /* end confdefs.h. */ -| /* Define _NSGetEnviron to an innocuous variant, in case declares _NSGetEnviron. -| For example, HP-UX 11i declares gettimeofday. */ -| #define _NSGetEnviron innocuous__NSGetEnviron -| -| /* System header to define __stub macros and hopefully few prototypes, -| which can conflict with char _NSGetEnviron (); below. -| Prefer to if __STDC__ is defined, since -| exists even on freestanding compilers. */ -| -| #ifdef __STDC__ -| # include -| #else -| # include -| #endif -| -| #undef _NSGetEnviron -| -| /* Override any gcc2 internal prototype to avoid an error. */ -| #ifdef __cplusplus -| extern "C" -| { -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| char _NSGetEnviron (); -| /* The GNU C library defines this for functions which it implements -| to always fail with ENOSYS. Some functions are actually named -| something starting with __ and the normal name is an alias. */ -| #if defined (__stub__NSGetEnviron) || defined (__stub____NSGetEnviron) -| choke me -| #else -| char (*f) () = _NSGetEnviron; -| #endif -| #ifdef __cplusplus -| } -| #endif -| -| int -| main () -| { -| return f != _NSGetEnviron; -| ; -| return 0; -| } -configure:19588: result: no -configure:19606: checking for sys/types.h -configure:19611: result: yes -configure:19606: checking for stdint.h -configure:19611: result: yes -configure:19753: checking for poll in -lpoll -configure:19783: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lpoll >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lpoll -collect2: ld returned 1 exit status -configure:19789: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| /* end confdefs.h. */ -| -| /* Override any gcc2 internal prototype to avoid an error. */ -| #ifdef __cplusplus -| extern "C" -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| char poll (); -| int -| main () -| { -| poll (); -| ; -| return 0; -| } -configure:19815: result: no -configure:19833: checking CoreAudio/CoreAudio.h usability -configure:19845: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:64:33: CoreAudio/CoreAudio.h: No such file or directory -configure:19851: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| /* end confdefs.h. */ -| #include -| #if HAVE_SYS_TYPES_H -| # include -| #endif -| #if HAVE_SYS_STAT_H -| # include -| #endif -| #if STDC_HEADERS -| # include -| # include -| #else -| # if HAVE_STDLIB_H -| # include -| # endif -| #endif -| #if HAVE_STRING_H -| # if !STDC_HEADERS && HAVE_MEMORY_H -| # include -| # endif -| # include -| #endif -| #if HAVE_STRINGS_H -| # include -| #endif -| #if HAVE_INTTYPES_H -| # include -| #else -| # if HAVE_STDINT_H -| # include -| # endif -| #endif -| #if HAVE_UNISTD_H -| # include -| #endif -| #include -configure:19874: result: no -configure:19878: checking CoreAudio/CoreAudio.h presence -configure:19888: gcc -E conftest.c -conftest.c:30:33: CoreAudio/CoreAudio.h: No such file or directory -configure:19894: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| /* end confdefs.h. */ -| #include -configure:19914: result: no -configure:19949: checking for CoreAudio/CoreAudio.h -configure:19956: result: no -configure:19974: checking if res_init needs -lresolv -configure:20001: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lresolv >&5 -configure:20007: $? = 0 -configure:20011: test -z - || test ! -s conftest.err -configure:20014: $? = 0 -configure:20017: test -s conftest -configure:20020: $? = 0 -configure:20024: result: yes -configure:20045: checking if res_init is available -configure:20070: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:20076: $? = 0 -configure:20080: test -z - || test ! -s conftest.err -configure:20083: $? = 0 -configure:20086: test -s conftest.o -configure:20089: $? = 0 -configure:20092: result: yes -configure:20115: checking for killpg in -lucb -configure:20145: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lucb >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lucb -collect2: ld returned 1 exit status -configure:20151: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_RES_INIT 1 -| #define HAVE_RES_INIT 1 -| /* end confdefs.h. */ -| -| /* Override any gcc2 internal prototype to avoid an error. */ -| #ifdef __cplusplus -| extern "C" -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| char killpg (); -| int -| main () -| { -| killpg (); -| ; -| return 0; -| } -configure:20177: result: no -configure:20260: checking for int -configure:20284: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:20290: $? = 0 -configure:20294: test -z - || test ! -s conftest.err -configure:20297: $? = 0 -configure:20300: test -s conftest.o -configure:20303: $? = 0 -configure:20314: result: yes -configure:20317: checking size of int -configure:20636: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:66: warning: no previous prototype for `longval' -conftest.c:67: warning: no previous prototype for `ulongval' -configure:20639: $? = 0 -configure:20641: ./conftest -configure:20644: $? = 0 -configure:20667: result: 4 -configure:20673: checking for long -configure:20697: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:20703: $? = 0 -configure:20707: test -z - || test ! -s conftest.err -configure:20710: $? = 0 -configure:20713: test -s conftest.o -configure:20716: $? = 0 -configure:20727: result: yes -configure:20730: checking size of long -configure:21049: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:67: warning: no previous prototype for `longval' -conftest.c:68: warning: no previous prototype for `ulongval' -configure:21052: $? = 0 -configure:21054: ./conftest -configure:21057: $? = 0 -configure:21080: result: 4 -configure:21086: checking for char * -configure:21110: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:21116: $? = 0 -configure:21120: test -z - || test ! -s conftest.err -configure:21123: $? = 0 -configure:21126: test -s conftest.o -configure:21129: $? = 0 -configure:21140: result: yes -configure:21143: checking size of char * -configure:21462: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:68: warning: no previous prototype for `longval' -conftest.c:69: warning: no previous prototype for `ulongval' -configure:21465: $? = 0 -configure:21467: ./conftest -configure:21470: $? = 0 -configure:21493: result: 4 -configure:21501: checking for dlopen in -ldl -configure:21531: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -ldl >&5 -configure:21537: $? = 0 -configure:21541: test -z - || test ! -s conftest.err -configure:21544: $? = 0 -configure:21547: test -s conftest -configure:21550: $? = 0 -configure:21563: result: yes -configure:21573: checking for shl_unload in -ldld -configure:21603: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -ldld >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ldld -collect2: ld returned 1 exit status -configure:21609: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_RES_INIT 1 -| #define HAVE_RES_INIT 1 -| #define SIZEOF_INT 4 -| #define SIZEOF_LONG 4 -| #define SIZEOF_CHAR_P 4 -| /* end confdefs.h. */ -| -| /* Override any gcc2 internal prototype to avoid an error. */ -| #ifdef __cplusplus -| extern "C" -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| char shl_unload (); -| int -| main () -| { -| shl_unload (); -| ; -| return 0; -| } -configure:21635: result: no -configure:21650: checking for size_t -configure:21674: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:21680: $? = 0 -configure:21684: test -z - || test ! -s conftest.err -configure:21687: $? = 0 -configure:21690: test -s conftest.o -configure:21693: $? = 0 -configure:21704: result: yes -configure:21707: checking size of size_t -configure:22026: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:69: warning: no previous prototype for `longval' -conftest.c:70: warning: no previous prototype for `ulongval' -configure:22029: $? = 0 -configure:22031: ./conftest -configure:22034: $? = 0 -configure:22057: result: 4 -configure:22064: checking for unsigned long -configure:22088: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:22094: $? = 0 -configure:22098: test -z - || test ! -s conftest.err -configure:22101: $? = 0 -configure:22104: test -s conftest.o -configure:22107: $? = 0 -configure:22118: result: yes -configure:22121: checking size of unsigned long -configure:22440: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -conftest.c:70: warning: no previous prototype for `longval' -conftest.c:71: warning: no previous prototype for `ulongval' -configure:22443: $? = 0 -configure:22445: ./conftest -configure:22448: $? = 0 -configure:22471: result: 4 -configure:22479: checking sizeof size_t == sizeof unsigned long -configure:22501: gcc -c -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:22507: $? = 0 -configure:22511: test -z - || test ! -s conftest.err -configure:22514: $? = 0 -configure:22517: test -s conftest.o -configure:22520: $? = 0 -configure:22522: result: yes -configure:22553: checking for vsnprintf -configure:22610: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:22616: $? = 0 -configure:22620: test -z - || test ! -s conftest.err -configure:22623: $? = 0 -configure:22626: test -s conftest -configure:22629: $? = 0 -configure:22641: result: yes -configure:22553: checking for snprintf -configure:22610: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c >&5 -configure:22616: $? = 0 -configure:22620: test -z - || test ! -s conftest.err -configure:22623: $? = 0 -configure:22626: test -s conftest -configure:22629: $? = 0 -configure:22641: result: yes -configure:22679: checking for X -configure:22724: gcc -E conftest.c -configure:22730: $? = 0 -configure:22821: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lXt >&5 -conftest.c: In function `main': -conftest.c:43: warning: implicit declaration of function `XtMalloc' -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -lXt -collect2: ld returned 1 exit status -configure:22827: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_RES_INIT 1 -| #define HAVE_RES_INIT 1 -| #define SIZEOF_INT 4 -| #define SIZEOF_LONG 4 -| #define SIZEOF_CHAR_P 4 -| #define SIZEOF_SIZE_T 4 -| #define SIZEOF_UNSIGNED_LONG 4 -| #define HAVE_VSNPRINTF 1 -| #define HAVE_SNPRINTF 1 -| /* end confdefs.h. */ -| -| int -| main () -| { -| XtMalloc() -| ; -| return 0; -| } -configure:22986: result: libraries /usr/X11R6/lib, headers /usr/X11R6/include -configure:23020: checking for IceConnectionNumber in -lICE -configure:23050: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute -L/usr/X11R6/lib conftest.c -lICE >&5 -configure:23056: $? = 0 -configure:23060: test -z - || test ! -s conftest.err -configure:23063: $? = 0 -configure:23066: test -s conftest -configure:23069: $? = 0 -configure:23082: result: yes -configure:23096: checking for libXext -configure:23131: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute -L/usr/X11R6/lib conftest.c -lXext -lX11 >&5 -configure:23137: $? = 0 -configure:23141: test -z - || test ! -s conftest.err -configure:23144: $? = 0 -configure:23147: test -s conftest -configure:23150: $? = 0 -configure:23169: result: yes -configure:23218: checking for pthread_create in -lpthread -configure:23248: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute conftest.c -lpthread >&5 -configure:23254: $? = 0 -configure:23258: test -z - || test ! -s conftest.err -configure:23261: $? = 0 -configure:23264: test -s conftest -configure:23267: $? = 0 -configure:23280: result: yes -configure:23738: checking for extra includes -configure:23766: result: no -configure:23770: checking for extra libs -configure:23799: result: no -configure:23805: checking for libz -configure:23846: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include -D_REENTRANT conftest.c -L/usr/X11R6/lib -lz >&5 -configure:23852: $? = 0 -configure:23856: test -z - || test ! -s conftest.err -configure:23859: $? = 0 -configure:23862: test -s conftest -configure:23865: $? = 0 -configure:23887: result: -lz -configure:23908: checking for libpng -configure:23950: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include -D_REENTRANT conftest.c -L/usr/X11R6/lib -lpng -lz -lm -lX11 >&5 -configure:23956: $? = 0 -configure:23960: test -z - || test ! -s conftest.err -configure:23963: $? = 0 -configure:23966: test -s conftest -configure:23969: $? = 0 -configure:23993: result: -lpng -lz -lm -configure:24004: checking for libjpeg6b -configure:24050: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include -D_REENTRANT conftest.c -L/usr/X11R6/lib -ljpeg6b -lm >&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ljpeg6b -collect2: ld returned 1 exit status -configure:24056: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| -| #define PACKAGE_NAME "" -| #define PACKAGE_TARNAME "" -| #define PACKAGE_VERSION "" -| #define PACKAGE_STRING "" -| #define PACKAGE_BUGREPORT "" -| #define PACKAGE "mallory" -| #define VERSION "1.0" -| #ifdef __cplusplus -| extern "C" void std::exit (int) throw (); using std::exit; -| #endif -| #define KDELIBSUFF "" -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_DLFCN_H 1 -| #define HAVE_CRYPT 1 -| #define ksize_t socklen_t -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_RES_INIT 1 -| #define HAVE_RES_INIT 1 -| #define SIZEOF_INT 4 -| #define SIZEOF_LONG 4 -| #define SIZEOF_CHAR_P 4 -| #define SIZEOF_SIZE_T 4 -| #define SIZEOF_UNSIGNED_LONG 4 -| #define HAVE_VSNPRINTF 1 -| #define HAVE_SNPRINTF 1 -| #define HAVE_LIBZ 1 -| #define HAVE_LIBPNG 1 -| /* end confdefs.h. */ -| /* Override any gcc2 internal prototype to avoid an error. */ -| struct jpeg_decompress_struct; -| typedef struct jpeg_decompress_struct * j_decompress_ptr; -| typedef int size_t; -| #ifdef __cplusplus -| extern "C" { -| #endif -| void jpeg_CreateDecompress(j_decompress_ptr cinfo, -| int version, size_t structsize); -| #ifdef __cplusplus -| } -| #endif -| /* We use char because int might match the return type of a gcc2 -| builtin and then its argument prototype would still apply. */ -| -| int -| main () -| { -| jpeg_CreateDecompress(0L, 0, 0); -| ; -| return 0; -| } -configure:24091: result: no -configure:24094: checking for libjpeg -configure:24140: gcc -o conftest -ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute -I/usr/X11R6/include -D_REENTRANT conftest.c -L/usr/X11R6/lib -ljpeg -lm >&5 -configure:24146: $? = 0 -configure:24150: test -z - || test ! -s conftest.err -configure:24153: $? = 0 -configure:24156: test -s conftest -configure:24159: $? = 0 -configure:24178: result: -ljpeg -configure: 24202: ${prefix}/include/jpeglib.h -configure: 24202: /usr/include/jpeglib.h -taking that -configure:24375: checking for Qt -configure: 24440: /usr/lib/qt3/include/ntqstyle.h -taking that -tried NO -configure:24552: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/lib/qt3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT -L/usr/lib/qt3/lib -L/usr/X11R6/lib conftest.cc -ltqt-mt -lpng -lz -lm -ljpeg -ldl -lXext -lX11 -lSM -lICE -lpthread 1>&5 -configure:24555: $? = 0 -configure:24614: result: libraries /usr/lib/qt3/lib, headers /usr/lib/qt3/include using -mt -configure:24624: checking if Qt compiles without flags -configure:24721: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/lib/qt3/include -DQT_THREAD_SUPPORT -D_REENTRANT -L/usr/X11R6/lib conftest.cc -ltqt-mt -lpng -lz -lm -ljpeg -ldl -lXext -lX11 -lSM -lICE -lXext -lX11 1>&5 -/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld: cannot find -ltqt-mt -collect2: ld returned 1 exit status -configure:24724: $? = 1 -configure: failed program was: -#include "confdefs.h" -#include -#include -#include -#include -#include -#if ! (TQT_VERSION >= 0x030100) -#error 1 -#endif - -int main() { - (void)QStyleFactory::create(QString::null); - QCursor c(Qt::WhatsThisCursor); - return 0; -} -configure:24757: result: no -configure:24795: checking for moc -configure:24864: result: /usr/lib/qt3/bin/moc -configure:24872: checking for uic -configure:24923: result: /usr/lib/qt3/bin/uic -configure:24951: checking whether uic supports -L -configure:24962: /usr/lib/qt3/bin/uic -L /nonexistant conftest.ui >/dev/null -configure:24965: $? = 0 -configure:24977: result: yes -configure:24989: checking whether uic supports -nounload -configure:25000: /usr/lib/qt3/bin/uic -nounload conftest.ui >/dev/null -configure:25003: $? = 0 -configure:25015: result: yes -configure:25052: checking if Qt needs -ljpeg -configure:25093: rm -rf SunWS_cache; g++ -o conftest -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/lib/qt3/include -I/usr/X11R6/include -DQT_THREAD_SUPPORT -D_REENTRANT conftest.cc -L/usr/X11R6/lib -L/usr/lib/qt3/lib -ltqt-mt -lpng -lz -lm -ldl -lXext -lX11 -lSM -lICE 1>&5 -conftest.cc: In function `int main()': -conftest.cc:49: warning: `char**argv' might be used uninitialized in this - function -configure:25099: $? = 0 -configure:25103: test -z - || test ! -s conftest.err -configure:25106: $? = 0 -configure:25109: test -s conftest -configure:25112: $? = 0 -configure:25141: result: no -configure:25167: checking for rpath -configure:25195: result: yes -configure:25198: checking for KDE -configure: 25246: /opt/kde3/include/ksharedptr.h -taking that -configure: 25276: /opt/kde3/lib/libtdeio.la -taking that -configure: 25294: /opt/kde3/lib/kde3/plugins/designer/tdewidgets.la -taking that -configure:25367: result: libraries /opt/kde3/lib, headers /opt/kde3/include -configure:25406: checking if UIC has KDE plugins available -configure:25433: /usr/lib/qt3/bin/uic -L /opt/kde3/lib/kde3/plugins/designer -nounload -impl actest.h actest.ui > actest.cpp -configure:25436: $? = 0 -configure:25447: result: yes -configure:25486: checking for KDE paths -configure:26073: result: defaults -configure:26112: checking for dcopidl -configure:26171: result: /opt/kde3/bin/dcopidl -configure:26178: checking for dcopidl2cpp -configure:26237: result: /opt/kde3/bin/dcopidl2cpp -configure:26245: checking for mcopidl -configure:26304: result: /opt/kde3/bin/mcopidl -configure:26311: checking for artsc-config -configure:26370: result: /opt/kde3/bin/artsc-config -configure:26378: checking for tde-config -configure:26429: result: /opt/kde3/bin/tde-config -configure:26436: checking for brockenboring -configure:26483: result: not found -configure:26554: checking for meinproc -configure:26605: result: /opt/kde3/bin/meinproc -configure: 26621: /opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl -taking that -configure:26791: checking if colorscheme should be compiled -configure:26803: result: yes -configure:26791: checking if malloryclient should be compiled -configure:26803: result: yes -configure:26933: creating ./config.status - -## ---------------------- ## -## Running config.status. ## -## ---------------------- ## - -This file was extended by config.status, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = - CONFIG_HEADERS = - CONFIG_LINKS = - CONFIG_COMMANDS = - $ ./config.status - -on tinbox - -config.status:703: creating config.h -config.status:845: config.h is unchanged -config.status:1009: executing depfiles commands - -## ---------------- ## -## Cache variables. ## -## ---------------- ## - -ac_cv_build=i686-pc-linux-gnu -ac_cv_build_alias=i686-pc-linux-gnu -ac_cv_c_compiler_gnu=yes -ac_cv_cxx_compiler_gnu=yes -ac_cv_env_CC_set= -ac_cv_env_CC_value= -ac_cv_env_CFLAGS_set= -ac_cv_env_CFLAGS_value= -ac_cv_env_CPPFLAGS_set= -ac_cv_env_CPPFLAGS_value= -ac_cv_env_CPP_set= -ac_cv_env_CPP_value= -ac_cv_env_CXXCPP_set= -ac_cv_env_CXXCPP_value= -ac_cv_env_CXXFLAGS_set= -ac_cv_env_CXXFLAGS_value= -ac_cv_env_CXX_set= -ac_cv_env_CXX_value= -ac_cv_env_LDFLAGS_set= -ac_cv_env_LDFLAGS_value= -ac_cv_env_build_alias_set= -ac_cv_env_build_alias_value= -ac_cv_env_host_alias_set= -ac_cv_env_host_alias_value= -ac_cv_env_target_alias_set= -ac_cv_env_target_alias_value= -ac_cv_exeext= -ac_cv_func__NSGetEnviron=no -ac_cv_func_connect=yes -ac_cv_func_inet_ntoa=yes -ac_cv_func_remove=yes -ac_cv_func_shmat=yes -ac_cv_func_snprintf=yes -ac_cv_func_vsnprintf=yes -ac_cv_have_dlfcn=yes -ac_cv_have_kde='have_kde=yes ac_kde_includes=/opt/kde3/include ac_kde_libraries=/opt/kde3/lib' -ac_cv_have_qt='have_qt=yes ac_qt_includes=/usr/lib/qt3/include ac_qt_libraries=/usr/lib/qt3/lib' -ac_cv_header_CoreAudio_CoreAudio_h=no -ac_cv_header_crt_externs_h=no -ac_cv_header_dlfcn_h=yes -ac_cv_header_inttypes_h=yes -ac_cv_header_memory_h=yes -ac_cv_header_stdc=yes -ac_cv_header_stdint_h=yes -ac_cv_header_stdlib_h=yes -ac_cv_header_string_h=yes -ac_cv_header_strings_h=yes -ac_cv_header_sys_stat_h=yes -ac_cv_header_sys_types_h=yes -ac_cv_header_unistd_h=yes -ac_cv_host=i686-pc-linux-gnu -ac_cv_host_alias=i686-pc-linux-gnu -ac_cv_lib_ICE_IceConnectionNumber=yes -ac_cv_lib_compat_main=no -ac_cv_lib_crypt_crypt=yes -ac_cv_lib_dl_dlopen=yes -ac_cv_lib_dld_shl_unload=no -ac_cv_lib_dnet_dnet_ntoa=no -ac_cv_lib_dnet_stub_dnet_ntoa=no -ac_cv_lib_jpeg_6b=no -ac_cv_lib_jpeg_normal=-ljpeg -ac_cv_lib_png='-lpng -lz -lm' -ac_cv_lib_poll_poll=no -ac_cv_lib_pthread_pthread_create=yes -ac_cv_lib_ucb_killpg=no -ac_cv_lib_util_main=yes -ac_cv_lib_z=-lz -ac_cv_objext=o -ac_cv_path_GMSGFMT=/usr/bin/msgfmt -ac_cv_path_MSGFMT=/usr/bin/msgfmt -ac_cv_path_XGETTEXT=/usr/bin/xgettext -ac_cv_path_install='/usr/bin/install -c' -ac_cv_prog_AWK=gawk -ac_cv_prog_CPP='gcc -E' -ac_cv_prog_CXXCPP='g++ -E' -ac_cv_prog_ac_ct_CC=gcc -ac_cv_prog_ac_ct_CXX=g++ -ac_cv_prog_ac_ct_RANLIB=ranlib -ac_cv_prog_ac_ct_STRIP=strip -ac_cv_prog_cc_g=yes -ac_cv_prog_cc_stdc= -ac_cv_prog_cxx_g=yes -ac_cv_prog_egrep='grep -E' -ac_cv_prog_make_make_set=yes -ac_cv_sizeof_char_p=4 -ac_cv_sizeof_int=4 -ac_cv_sizeof_long=4 -ac_cv_sizeof_size_t=4 -ac_cv_sizeof_unsigned_long=4 -ac_cv_socklen_t=socklen_t -ac_cv_target=i686-pc-linux-gnu -ac_cv_target_alias=i686-pc-linux-gnu -ac_cv_type_char_p=yes -ac_cv_type_int=yes -ac_cv_type_long=yes -ac_cv_type_size_t=yes -ac_cv_type_unsigned_long=yes -am_cv_CC_dependencies_compiler_type=gcc3 -am_cv_CXX_dependencies_compiler_type=gcc3 -kde_cv_all_paths='kde_have_all_paths="yes" kde_htmldir="\${prefix}/share/doc/HTML" kde_appsdir="\${prefix}/share/applnk" kde_icondir="\${prefix}/share/icons" kde_sounddir="\${prefix}/share/sounds" kde_datadir="\${prefix}/share/apps" kde_locale="\${prefix}/share/locale" kde_cgidir="\${exec_prefix}/cgi-bin" kde_confdir="\${prefix}/share/config" kde_mimedir="\${prefix}/share/mimelnk" kde_toolbardir="\${prefix}/share/toolbar" kde_wallpaperdir="\${prefix}/share/wallpapers" kde_templatesdir="\${prefix}/share/templates" kde_bindir="\${exec_prefix}/bin" kde_servicesdir="\${prefix}/share/services" kde_servicetypesdir="\${prefix}/share/servicetypes" kde_moduledir="\${libdir}/kde3" kde_styledir="\${libdir}/kde3/plugins/styles" kde_widgetdir="/opt/kde3/lib/kde3/plugins/designer" xdg_appsdir="\${datadir}/applications" xdg_directorydir="\${datadir}/desktop-directories" kde_result=defaults' -kde_cv_func_strlcat=no -kde_cv_func_strlcpy=no -kde_cv_have_libXext=yes -kde_cv_have_x='have_x=yes kde_x_includes=/usr/X11R6/include kde_x_libraries=/usr/X11R6/lib' -kde_cv_path=/opt/kde3/bin/meinproc -kde_cv_path_artsc_config=/opt/kde3/bin/artsc-config -kde_cv_path_brockenboring=NONE -kde_cv_path_dcopidl=/opt/kde3/bin/dcopidl -kde_cv_path_dcopidl2cpp=/opt/kde3/bin/dcopidl2cpp -kde_cv_path_kde_config=/opt/kde3/bin/tde-config -kde_cv_path_mcopidl=/opt/kde3/bin/mcopidl -kde_cv_path_meinproc=/opt/kde3/bin/meinproc -kde_cv_path_moc=/usr/lib/qt3/bin/moc -kde_cv_path_uic=/usr/lib/qt3/bin/uic -kde_cv_prog_cxx_O0=yes -kde_cv_prog_cxx_Wmissing_format_attribute=yes -kde_cv_prog_cxx_Wno_long_long=yes -kde_cv_prog_cxx_Wnon_virtual_dtor=yes -kde_cv_prog_cxx_Wundef=yes -kde_cv_prog_cxx_fexceptions=yes -kde_cv_prog_cxx_fno_check_new=yes -kde_cv_prog_cxx_fno_common=yes -kde_cv_prog_cxx_fno_exceptions=yes -kde_cv_prog_uic_L=yes -kde_cv_prog_uic_nounload=yes -kde_cv_proto_strlcat='yes - in libtdefakes' -kde_cv_proto_strlcpy='yes - in libtdefakes' -kde_cv_qt_direct=no -kde_cv_qt_jpeg=no -kde_cv_uic_plugins=yes -lt_cv_deplibs_check_method=pass_all -lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file='/lib/libc.so.6 /lib/libc-*.so' -lt_cv_ld_reload_flag=-r -lt_cv_objdir=.libs -lt_cv_path_LD=/usr/i586-suse-linux/bin/ld -lt_cv_path_NM='/usr/bin/nm -B' -lt_cv_path_SED=/usr/bin/sed -lt_cv_prog_compiler_c_o=yes -lt_cv_prog_compiler_c_o_CXX=yes -lt_cv_prog_compiler_c_o_GCJ=no -lt_cv_prog_compiler_rtti_exceptions=no -lt_cv_prog_gnu_ld=yes -lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p'\''' -lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\''' -lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\''' -lt_cv_sys_max_cmd_len=32768 -lt_lt_cv_prog_compiler_c_o='"yes"' -lt_lt_cv_prog_compiler_c_o_CXX='"yes"' -lt_lt_cv_prog_compiler_c_o_GCJ='"no"' -lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'\''"' -lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"' -lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"' - -## ----------------- ## -## Output variables. ## -## ----------------- ## - -ACLOCAL='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6' -AMDEPBACKSLASH='\' -AMDEP_FALSE='#' -AMDEP_TRUE='' -AMTAR='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar' -ARTSCCONFIG='/opt/kde3/bin/artsc-config' -AUTOCONF='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf' -AUTODIRS='' -AUTOHEADER='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader' -AUTOMAKE='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6' -AWK='gawk' -BROCKENBORING='' -CC='gcc' -CCDEPMODE='depmode=gcc3' -CFLAGS='-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute' -CONF_FILES=' $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in' -CPP='gcc -E' -CPPFLAGS=' -DQT_THREAD_SUPPORT -D_REENTRANT' -CXX='g++' -CXXCPP='g++ -E' -CXXDEPMODE='depmode=gcc3' -CXXFLAGS='-Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common' -DCOPIDL2CPP='/opt/kde3/bin/dcopidl2cpp' -DCOPIDL='/opt/kde3/bin/dcopidl' -DCOP_DEPENDENCIES='$(DCOPIDL)' -DEFS='-DHAVE_CONFIG_H' -DEPDIR='.deps' -ECHO='echo' -ECHO_C='' -ECHO_N='-n' -ECHO_T='' -EGREP='grep -E' -EXEEXT='' -FRAMEWORK_COREAUDIO='' -GMSGFMT='/usr/bin/msgfmt' -INSTALL_DATA='${INSTALL} -m 644' -INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' -INSTALL_SCRIPT='${INSTALL}' -INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s' -KDECONFIG='/opt/kde3/bin/tde-config' -KDE_EXTRA_RPATH='' -KDE_INCLUDES='-I/opt/kde3/include' -KDE_LDFLAGS='-L/opt/kde3/lib' -KDE_MT_LDFLAGS='' -KDE_MT_LIBS='-lpthread' -KDE_NO_UNDEFINED='' -KDE_PLUGIN='-avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS)' -KDE_RPATH='-R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries)' -KDE_USE_CLOSURE_FALSE='#' -KDE_USE_CLOSURE_TRUE='' -KDE_USE_FINAL_FALSE='' -KDE_USE_FINAL_TRUE='#' -KDE_USE_NMCHECK_FALSE='' -KDE_USE_NMCHECK_TRUE='#' -KDE_XSL_STYLESHEET='/opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl' -LDFLAGS='' -LIBCOMPAT='' -LIBCRYPT='-lcrypt' -LIBDL='-ldl' -LIBJPEG='-ljpeg' -LIBOBJS='' -LIBPNG='-lpng -lz -lm' -LIBPTHREAD='-lpthread' -LIBRESOLV='-lresolv' -LIBS='' -LIBSM='-lSM -lICE' -LIBSOCKET='' -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' -LIBUCB='' -LIBUTIL='-lutil' -LIBZ='-lz' -LIB_KAB='-lkab' -LIB_KABC='-ltdeabc' -LIB_TDECORE='-ltdecore' -LIB_TDEPRINT='-ltdeprint' -LIB_TDEUI='-ltdeui' -LIB_KFILE='-ltdeio' -LIB_KFM='' -LIB_TDEHTML='-ltdehtml' -LIB_TDEIO='-ltdeio' -LIB_TDEPARTS='-ltdeparts' -LIB_TDESPELL='-ltdespell' -LIB_TDESYCOCA='-ltdeio' -LIB_POLL='' -LIB_QPE='' -LIB_QT='-ltqt-mt $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread' -LIB_SMB='-lsmb' -LIB_X11='-lX11 $(LIBSOCKET)' -LIB_XEXT='-lXext' -LN_S='ln -s' -LTLIBOBJS='' -MAKEINFO='${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run makeinfo' -MCOPIDL='/opt/kde3/bin/mcopidl' -MEINPROC='/opt/kde3/bin/meinproc' -MOC='/usr/lib/qt3/bin/moc' -MSGFMT='/usr/bin/msgfmt' -NOOPT_CFLAGS='-O0' -NOOPT_CXXFLAGS='-O0' -OBJEXT='o' -PACKAGE='mallory' -PACKAGE_BUGREPORT='' -PACKAGE_NAME='' -PACKAGE_STRING='' -PACKAGE_TARNAME='' -PACKAGE_VERSION='' -PATH_SEPARATOR=':' -QTE_NORTTI='' -QT_INCLUDES='-I/usr/lib/qt3/include' -QT_LDFLAGS='-L/usr/lib/qt3/lib' -RANLIB='ranlib' -SET_MAKE='' -SHELL='/bin/sh' -STRIP='strip' -TOPSUBDIRS=' colorscheme malloryclient' -UIC='/usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload' -UIC_TR='tr2i18n' -USER_INCLUDES='' -USER_LDFLAGS='' -USE_EXCEPTIONS='-fexceptions' -USE_RTTI='' -USE_THREADS='' -VERSION='1.0' -WOVERLOADED_VIRTUAL='' -XGETTEXT='/usr/bin/xgettext' -X_EXTRA_LIBS='' -X_INCLUDES='-I/usr/X11R6/include' -X_LDFLAGS='-L/usr/X11R6/lib' -X_PRE_LIBS='' -X_RPATH='-R $(x_libraries)' -ac_ct_CC='gcc' -ac_ct_CXX='g++' -ac_ct_RANLIB='ranlib' -ac_ct_STRIP='strip' -all_includes='-I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include ' -all_libraries='-L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib ' -am__include='include' -am__quote='' -bindir='${exec_prefix}/bin' -build='i686-pc-linux-gnu' -build_alias='' -build_cpu='i686' -build_os='linux-gnu' -build_vendor='pc' -datadir='${prefix}/share' -exec_prefix='${prefix}' -host='i686-pc-linux-gnu' -host_alias='' -host_cpu='i686' -host_os='linux-gnu' -host_vendor='pc' -include_ARTS_FALSE='#' -include_ARTS_TRUE='' -includedir='${prefix}/include' -infodir='${prefix}/info' -install_sh='/stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh' -kde_appsdir='${prefix}/share/applnk' -kde_bindir='${exec_prefix}/bin' -kde_confdir='${prefix}/share/config' -kde_datadir='${prefix}/share/apps' -kde_htmldir='${prefix}/share/doc/HTML' -kde_icondir='${prefix}/share/icons' -kde_includes='/opt/kde3/include' -kde_libraries='/opt/kde3/lib' -kde_libs_htmldir='/opt/kde3/share/doc/HTML' -kde_libs_prefix='/opt/kde3' -kde_locale='${prefix}/share/locale' -kde_mimedir='${prefix}/share/mimelnk' -kde_moduledir='${libdir}/kde3' -kde_qtver='3' -kde_servicesdir='${prefix}/share/services' -kde_servicetypesdir='${prefix}/share/servicetypes' -kde_sounddir='${prefix}/share/sounds' -kde_styledir='${libdir}/kde3/plugins/styles' -kde_templatesdir='${prefix}/share/templates' -kde_wallpaperdir='${prefix}/share/wallpapers' -kde_widgetdir='/opt/kde3/lib/kde3/plugins/designer' -tdeinitdir='$(kde_moduledir)' -libdir='${exec_prefix}/lib' -libexecdir='${exec_prefix}/libexec' -localstatedir='${prefix}/var' -mandir='${prefix}/man' -oldincludedir='/usr/include' -prefix='/opt/kde3' -program_transform_name='s,x,x,' -qt_includes='/usr/lib/qt3/include' -qt_libraries='/usr/lib/qt3/lib' -sbindir='${exec_prefix}/sbin' -sharedstatedir='${prefix}/com' -sysconfdir='${prefix}/etc' -target='i686-pc-linux-gnu' -target_alias='' -target_cpu='i686' -target_os='linux-gnu' -target_vendor='pc' -x_includes='/usr/X11R6/include' -x_libraries='/usr/X11R6/lib' -xdg_appsdir='${datadir}/applications' -xdg_directorydir='${datadir}/desktop-directories' - -## ----------- ## -## confdefs.h. ## -## ----------- ## - -#define HAVE_CRYPT 1 -#define HAVE_DLFCN_H 1 -#define HAVE_INTTYPES_H 1 -#define HAVE_LIBJPEG 1 -#define HAVE_LIBPNG 1 -#define HAVE_LIBPTHREAD 1 -#define HAVE_LIBZ 1 -#define HAVE_MEMORY_H 1 -#define HAVE_RES_INIT 1 -#define HAVE_RES_INIT 1 -#define HAVE_SNPRINTF 1 -#define HAVE_STDINT_H 1 -#define HAVE_STDINT_H 1 -#define HAVE_STDLIB_H 1 -#define HAVE_STRINGS_H 1 -#define HAVE_STRING_H 1 -#define HAVE_SYS_STAT_H 1 -#define HAVE_SYS_TYPES_H 1 -#define HAVE_SYS_TYPES_H 1 -#define HAVE_UNISTD_H 1 -#define HAVE_VSNPRINTF 1 -#define KDELIBSUFF "" -#define PACKAGE "mallory" -#define PACKAGE_BUGREPORT "" -#define PACKAGE_NAME "" -#define PACKAGE_STRING "" -#define PACKAGE_TARNAME "" -#define PACKAGE_VERSION "" -#define SIZEOF_CHAR_P 4 -#define SIZEOF_INT 4 -#define SIZEOF_LONG 4 -#define SIZEOF_SIZE_T 4 -#define SIZEOF_UNSIGNED_LONG 4 -#define STDC_HEADERS 1 -#define VERSION "1.0" -#define ksize_t socklen_t -#endif -#ifdef __cplusplus -extern "C" void std::exit (int) throw (); using std::exit; - -configure: exit 0 diff --git a/config.status b/config.status deleted file mode 100755 index e764887..0000000 --- a/config.status +++ /dev/null @@ -1,1106 +0,0 @@ -#! /bin/sh -# Generated by configure. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=${CONFIG_SHELL-/bin/sh} -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -config_files=" Makefile colorscheme/Makefile malloryclient/Makefile malloryclient/config/Makefile" -config_headers=" config.h" -config_commands=" depfiles" - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." -ac_cs_version="\ -config.status -configured by ./configure, generated by GNU Autoconf 2.59, - with options \"'--prefix=/opt/kde3'\" - -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=. -INSTALL="/usr/bin/install -c -p" -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -if $ac_cs_recheck; then - echo "running /bin/sh ./configure " '--prefix=/opt/kde3' $ac_configure_extra_args " --no-create --no-recursion" >&6 - exec /bin/sh ./configure '--prefix=/opt/kde3' $ac_configure_extra_args --no-create --no-recursion -fi - -# -# INIT-COMMANDS section. -# - -AMDEP_TRUE="" ac_aux_dir="admin" - -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "colorscheme/Makefile" ) CONFIG_FILES="$CONFIG_FILES colorscheme/Makefile" ;; - "malloryclient/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/Makefile" ;; - "malloryclient/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/config/Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF -s,@SHELL@,/bin/sh,;t t -s,@PATH_SEPARATOR@,:,;t t -s,@PACKAGE_NAME@,,;t t -s,@PACKAGE_TARNAME@,,;t t -s,@PACKAGE_VERSION@,,;t t -s,@PACKAGE_STRING@,,;t t -s,@PACKAGE_BUGREPORT@,,;t t -s,@exec_prefix@,${prefix},;t t -s,@prefix@,/opt/kde3,;t t -s,@program_transform_name@,s,x,x,,;t t -s,@bindir@,${exec_prefix}/bin,;t t -s,@sbindir@,${exec_prefix}/sbin,;t t -s,@libexecdir@,${exec_prefix}/libexec,;t t -s,@datadir@,${prefix}/share,;t t -s,@sysconfdir@,${prefix}/etc,;t t -s,@sharedstatedir@,${prefix}/com,;t t -s,@localstatedir@,${prefix}/var,;t t -s,@libdir@,${exec_prefix}/lib,;t t -s,@includedir@,${prefix}/include,;t t -s,@oldincludedir@,/usr/include,;t t -s,@infodir@,${prefix}/info,;t t -s,@mandir@,${prefix}/man,;t t -s,@build_alias@,,;t t -s,@host_alias@,,;t t -s,@target_alias@,,;t t -s,@DEFS@,-DHAVE_CONFIG_H,;t t -s,@ECHO_C@,,;t t -s,@ECHO_N@,-n,;t t -s,@ECHO_T@,,;t t -s,@LIBS@,,;t t -s,@build@,i686-pc-linux-gnu,;t t -s,@build_cpu@,i686,;t t -s,@build_vendor@,pc,;t t -s,@build_os@,linux-gnu,;t t -s,@host@,i686-pc-linux-gnu,;t t -s,@host_cpu@,i686,;t t -s,@host_vendor@,pc,;t t -s,@host_os@,linux-gnu,;t t -s,@target@,i686-pc-linux-gnu,;t t -s,@target_cpu@,i686,;t t -s,@target_vendor@,pc,;t t -s,@target_os@,linux-gnu,;t t -s,@INSTALL_PROGRAM@,${INSTALL} $(INSTALL_STRIP_FLAG),;t t -s,@INSTALL_SCRIPT@,${INSTALL},;t t -s,@INSTALL_DATA@,${INSTALL} -m 644,;t t -s,@PACKAGE@,mallory,;t t -s,@VERSION@,1.0,;t t -s,@ACLOCAL@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run aclocal-1.6,;t t -s,@AUTOCONF@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoconf,;t t -s,@AUTOMAKE@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run automake-1.6,;t t -s,@AUTOHEADER@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run autoheader,;t t -s,@MAKEINFO@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run makeinfo,;t t -s,@AMTAR@,${SHELL} /stack/archives/kde-plus/window.decorations/mallory-1.0/admin/missing --run tar,;t t -s,@install_sh@,/stack/archives/kde-plus/window.decorations/mallory-1.0/admin/install-sh,;t t -s,@STRIP@,strip,;t t -s,@ac_ct_STRIP@,strip,;t t -s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t -s,@AWK@,gawk,;t t -s,@SET_MAKE@,,;t t -s,@CONF_FILES@, $(top_srcdir)/./admin/configure.in.min $(top_srcdir)/configure.in.in,;t t -s,@CC@,gcc,;t t -s,@CFLAGS@,-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -O2 -Wformat-security -Wmissing-format-attribute,;t t -s,@LDFLAGS@,,;t t -s,@CPPFLAGS@, -DQT_THREAD_SUPPORT -D_REENTRANT,;t t -s,@ac_ct_CC@,gcc,;t t -s,@EXEEXT@,,;t t -s,@OBJEXT@,o,;t t -s,@DEPDIR@,.deps,;t t -s,@am__include@,include,;t t -s,@am__quote@,,;t t -s,@AMDEP_TRUE@,,;t t -s,@AMDEP_FALSE@,#,;t t -s,@AMDEPBACKSLASH@,\,;t t -s,@CCDEPMODE@,depmode=gcc3,;t t -s,@CPP@,gcc -E,;t t -s,@CXX@,g++,;t t -s,@CXXFLAGS@,-Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -pedantic -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common,;t t -s,@ac_ct_CXX@,g++,;t t -s,@CXXDEPMODE@,depmode=gcc3,;t t -s,@WOVERLOADED_VIRTUAL@,,;t t -s,@USE_EXCEPTIONS@,-fexceptions,;t t -s,@USE_RTTI@,,;t t -s,@CXXCPP@,g++ -E,;t t -s,@NOOPT_CXXFLAGS@,-O0,;t t -s,@NOOPT_CFLAGS@,-O0,;t t -s,@KDE_USE_FINAL_TRUE@,#,;t t -s,@KDE_USE_FINAL_FALSE@,,;t t -s,@KDE_USE_CLOSURE_TRUE@,,;t t -s,@KDE_USE_CLOSURE_FALSE@,#,;t t -s,@KDE_NO_UNDEFINED@,,;t t -s,@KDE_USE_NMCHECK_TRUE@,#,;t t -s,@KDE_USE_NMCHECK_FALSE@,,;t t -s,@LN_S@,ln -s,;t t -s,@ECHO@,echo,;t t -s,@RANLIB@,ranlib,;t t -s,@ac_ct_RANLIB@,ranlib,;t t -s,@EGREP@,grep -E,;t t -s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool --silent,;t t -s,@KDE_PLUGIN@,-avoid-version -module -no-undefined $(KDE_NO_UNDEFINED) $(KDE_RPATH) $(KDE_MT_LDFLAGS),;t t -s,@MSGFMT@,/usr/bin/msgfmt,;t t -s,@GMSGFMT@,/usr/bin/msgfmt,;t t -s,@XGETTEXT@,/usr/bin/xgettext,;t t -s,@LIBUTIL@,-lutil,;t t -s,@LIBCOMPAT@,,;t t -s,@LIBCRYPT@,-lcrypt,;t t -s,@LIBRESOLV@,-lresolv,;t t -s,@LIB_POLL@,,;t t -s,@FRAMEWORK_COREAUDIO@,,;t t -s,@LIBSOCKET@,,;t t -s,@X_EXTRA_LIBS@,,;t t -s,@LIBUCB@,,;t t -s,@LIBDL@,-ldl,;t t -s,@X_INCLUDES@,-I/usr/X11R6/include,;t t -s,@X_LDFLAGS@,-L/usr/X11R6/lib,;t t -s,@x_libraries@,/usr/X11R6/lib,;t t -s,@x_includes@,/usr/X11R6/include,;t t -s,@LIBSM@,-lSM -lICE,;t t -s,@X_PRE_LIBS@,,;t t -s,@LIB_X11@,-lX11 $(LIBSOCKET),;t t -s,@QTE_NORTTI@,,;t t -s,@LIB_XEXT@,-lXext,;t t -s,@LIBPTHREAD@,-lpthread,;t t -s,@USE_THREADS@,,;t t -s,@KDE_MT_LDFLAGS@,,;t t -s,@KDE_MT_LIBS@,-lpthread,;t t -s,@USER_INCLUDES@,,;t t -s,@USER_LDFLAGS@,,;t t -s,@LIBZ@,-lz,;t t -s,@LIBPNG@,-lpng -lz -lm,;t t -s,@LIBJPEG@,-ljpeg,;t t -s,@qt_libraries@,/usr/lib/qt3/lib,;t t -s,@qt_includes@,/usr/lib/qt3/include,;t t -s,@QT_INCLUDES@,-I/usr/lib/qt3/include,;t t -s,@QT_LDFLAGS@,-L/usr/lib/qt3/lib,;t t -s,@MOC@,/usr/lib/qt3/bin/moc,;t t -s,@UIC@,/usr/lib/qt3/bin/uic -L $(kde_widgetdir) -nounload,;t t -s,@UIC_TR@,tr2i18n,;t t -s,@LIB_QT@,-ltqt-mt $(LIBPNG) -lXext $(LIB_X11) $(LIBSM) -lpthread,;t t -s,@LIB_QPE@,,;t t -s,@kde_qtver@,3,;t t -s,@KDE_EXTRA_RPATH@,,;t t -s,@KDE_RPATH@,-R $(kde_libraries) -R $(qt_libraries) -R $(x_libraries),;t t -s,@X_RPATH@,-R $(x_libraries),;t t -s,@kde_libraries@,/opt/kde3/lib,;t t -s,@kde_includes@,/opt/kde3/include,;t t -s,@KDE_LDFLAGS@,-L/opt/kde3/lib,;t t -s,@KDE_INCLUDES@,-I/opt/kde3/include,;t t -s,@all_includes@,-I/opt/kde3/include -I/usr/lib/qt3/include -I/usr/X11R6/include ,;t t -s,@all_libraries@,-L/usr/X11R6/lib -L/usr/lib/qt3/lib -L/opt/kde3/lib ,;t t -s,@AUTODIRS@,,;t t -s,@include_ARTS_TRUE@,,;t t -s,@include_ARTS_FALSE@,#,;t t -s,@DCOPIDL@,/opt/kde3/bin/dcopidl,;t t -s,@DCOPIDL2CPP@,/opt/kde3/bin/dcopidl2cpp,;t t -s,@DCOP_DEPENDENCIES@,$(DCOPIDL),;t t -s,@MCOPIDL@,/opt/kde3/bin/mcopidl,;t t -s,@ARTSCCONFIG@,/opt/kde3/bin/artsc-config,;t t -s,@KDECONFIG@,/opt/kde3/bin/tde-config,;t t -s,@BROCKENBORING@,,;t t -s,@MEINPROC@,/opt/kde3/bin/meinproc,;t t -s,@KDE_XSL_STYLESHEET@,/opt/kde3/share/apps/ksgmltools2/customization/kde-chunk.xsl,;t t -s,@kde_libs_prefix@,/opt/kde3,;t t -s,@kde_libs_htmldir@,/opt/kde3/share/doc/HTML,;t t -s,@kde_htmldir@,${prefix}/share/doc/HTML,;t t -s,@kde_appsdir@,${prefix}/share/applnk,;t t -s,@kde_icondir@,${prefix}/share/icons,;t t -s,@kde_sounddir@,${prefix}/share/sounds,;t t -s,@kde_datadir@,${prefix}/share/apps,;t t -s,@kde_locale@,${prefix}/share/locale,;t t -s,@kde_confdir@,${prefix}/share/config,;t t -s,@kde_mimedir@,${prefix}/share/mimelnk,;t t -s,@kde_wallpaperdir@,${prefix}/share/wallpapers,;t t -s,@kde_bindir@,${exec_prefix}/bin,;t t -s,@xdg_appsdir@,${datadir}/applications,;t t -s,@xdg_directorydir@,${datadir}/desktop-directories,;t t -s,@kde_templatesdir@,${prefix}/share/templates,;t t -s,@kde_servicesdir@,${prefix}/share/services,;t t -s,@kde_servicetypesdir@,${prefix}/share/servicetypes,;t t -s,@kde_moduledir@,${libdir}/kde3,;t t -s,@tdeinitdir@,$(kde_moduledir),;t t -s,@kde_styledir@,${libdir}/kde3/plugins/styles,;t t -s,@kde_widgetdir@,/opt/kde3/lib/kde3/plugins/designer,;t t -s,@LIB_TDECORE@,-ltdecore,;t t -s,@LIB_TDEUI@,-ltdeui,;t t -s,@LIB_TDEIO@,-ltdeio,;t t -s,@LIB_SMB@,-lsmb,;t t -s,@LIB_KAB@,-lkab,;t t -s,@LIB_KABC@,-ltdeabc,;t t -s,@LIB_TDEHTML@,-ltdehtml,;t t -s,@LIB_TDESPELL@,-ltdespell,;t t -s,@LIB_TDEPARTS@,-ltdeparts,;t t -s,@LIB_TDEPRINT@,-ltdeprint,;t t -s,@LIB_TDESYCOCA@,-ltdeio,;t t -s,@LIB_KFILE@,-ltdeio,;t t -s,@LIB_KFM@,,;t t -s,@TOPSUBDIRS@, colorscheme malloryclient,;t t -s,@LIBOBJS@,,;t t -s,@LTLIBOBJS@,,;t t -CEOF - - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - #echo Doing the fast build of Makefiles -- autoconf 250 - # VPATH subst was seen in original config.status main loop - echo '/^[ ]*VPATH[ ]*=[^:]*$/d' >>$tmp/subs.sed - rm -f $tmp/subs.files - for ac_file in .. $CONFIG_FILES ; do - if test "x$ac_file" != x..; then - echo $ac_file >> $tmp/subs.files - fi - done - if test -f $tmp/subs.files ; then - perl admin/config.pl "$tmp/subs.sed" "$tmp/subs.files" "$srcdir" "$INSTALL" - fi - rm -f $tmp/subs.files - -fi -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - # Do quote $f, to prevent DOS paths from being IFS'd. - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - - # Handle all the #define templates only if necessary. - if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then - # If there are no defines, we may have an empty if/fi - : - cat >$tmp/defines.sed <$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in - - fi # grep - - # Handle all the #undef templates - cat >$tmp/undefs.sed <$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in - if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - rm -f $ac_file - mv $tmp/config.h $ac_file - fi - else - cat $tmp/config.h - rm -f $tmp/config.h - fi - # Run the commands associated with the file. - case $ac_file in - config.h ) # update the timestamp -echo 'timestamp for config.h' >"./stamp-h1" - ;; - esac -done - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - else - continue - fi - grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} - { (exit 1); exit 1; }; }; } - - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - esac -done - -{ (exit 0); exit 0; } diff --git a/configure b/configure deleted file mode 100755 index 80b760f..0000000 --- a/configure +++ /dev/null @@ -1,28353 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59. -# -# Copyright (C) 2003 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= - -ac_unique_file="acinclude.m4" -ac_default_prefix=${TDEDIR:-/usr/local/kde} -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE CONF_FILES CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE WOVERLOADED_VIRTUAL USE_EXCEPTIONS USE_RTTI CXXCPP NOOPT_CXXFLAGS NOOPT_CFLAGS KDE_USE_FINAL_TRUE KDE_USE_FINAL_FALSE KDE_USE_CLOSURE_TRUE KDE_USE_CLOSURE_FALSE KDE_NO_UNDEFINED KDE_USE_NMCHECK_TRUE KDE_USE_NMCHECK_FALSE LN_S ECHO RANLIB ac_ct_RANLIB EGREP LIBTOOL KDE_PLUGIN MSGFMT GMSGFMT XGETTEXT LIBUTIL LIBCOMPAT LIBCRYPT LIBRESOLV LIB_POLL FRAMEWORK_COREAUDIO LIBSOCKET X_EXTRA_LIBS LIBUCB LIBDL X_INCLUDES X_LDFLAGS x_libraries x_includes LIBSM X_PRE_LIBS LIB_X11 QTE_NORTTI LIB_XEXT LIBPTHREAD USE_THREADS KDE_MT_LDFLAGS KDE_MT_LIBS USER_INCLUDES USER_LDFLAGS LIBZ LIBPNG LIBJPEG qt_libraries qt_includes QT_INCLUDES QT_LDFLAGS MOC UIC UIC_TR LIB_QT LIB_QPE kde_qtver KDE_EXTRA_RPATH KDE_RPATH X_RPATH kde_libraries kde_includes KDE_LDFLAGS KDE_INCLUDES all_includes all_libraries AUTODIRS include_ARTS_TRUE include_ARTS_FALSE DCOPIDL DCOPIDL2CPP DCOP_DEPENDENCIES MCOPIDL ARTSCCONFIG KDECONFIG BROCKENBORING MEINPROC KDE_XSL_STYLESHEET kde_libs_prefix kde_libs_htmldir kde_htmldir kde_appsdir kde_icondir kde_sounddir kde_datadir kde_locale kde_confdir kde_mimedir kde_wallpaperdir kde_bindir xdg_appsdir xdg_directorydir kde_templatesdir kde_servicesdir kde_servicetypesdir kde_moduledir tdeinitdir kde_styledir kde_widgetdir LIB_TDECORE LIB_TDEUI LIB_TDEIO LIB_SMB LIB_KAB LIB_KABC LIB_TDEHTML LIB_TDESPELL LIB_TDEPARTS LIB_TDEPRINT LIB_TDESYCOCA LIB_KFILE LIB_KFM TOPSUBDIRS LIBOBJS LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_CXXCPP_set=${CXXCPP+set} -ac_env_CXXCPP_value=$CXXCPP -ac_cv_env_CXXCPP_set=${CXXCPP+set} -ac_cv_env_CXXCPP_value=$CXXCPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] - --target=TARGET configure for building compilers for TARGET [HOST] -_ACEOF -fi - -if test -n "$ac_init_help"; then - - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-fast-perl disable fast Makefile generation (needs perl) - --enable-debug=ARG enables debug symbols (yes|no|full) default=no - --disable-debug disables debug output and debug symbols default=no - --enable-strict compiles with strict compiler options (may not work!) - --disable-warnings disables compilation with -Wall and similiar - --enable-profile creates profiling infos default=no - --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors - --enable-pch enables precompiled header support (currently only KCC) default=no - --enable-final build size optimized apps (experimental - needs lots of memory) - --disable-closure don't delay template instantiation - --enable-nmcheck enable automatic namespace cleanness check - --enable-shared[=PKGS] - build shared libraries [default=yes] - --enable-static[=PKGS] - build static libraries [default=no] - --enable-libsuffix /lib directory suffix (64,32,none=default) - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-objprelink prelink apps using objprelink (obsolete) - --enable-embedded link to Qt-embedded, don't use X - --enable-qtopia link to Qt-embedded, link to the Qtopia Environment - --disable-mt link to non-threaded Qt (deprecated) - --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only. - --disable-threading disables threading even if libpthread found - --disable-rpath do not use the rpath feature of ld - --disable-path-check don't try to find out, where to install - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-pic try to use only PIC/non-PIC objects [default=use - both] - --with-tags=TAGS include additional configurations [CXX,GCJ] - --with-extra-includes=DIR - adds non standard include paths - --with-extra-libs=DIR adds non standard library paths - --with-qt-dir=DIR where the root of Qt is installed - --with-qt-includes=DIR where the Qt includes are. - --with-qt-libraries=DIR where the Qt library is installed. - --without-arts build without aRts default=detect - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CPP C preprocessor - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CXXCPP C++ preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF - -Copyright (C) 2003 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - -ac_aux_dir= -for ac_dir in admin $srcdir/admin; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in admin $srcdir/admin" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in admin $srcdir/admin" >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - - -unset CDPATH - -# Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 -build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 -host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking target system type" >&5 -echo $ECHO_N "checking target system type... $ECHO_C" >&6 -if test "${ac_cv_target+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_target_alias=$target_alias -test "x$ac_cv_target_alias" = "x" && - ac_cv_target_alias=$ac_cv_host_alias -ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_target" >&5 -echo "${ECHO_T}$ac_cv_target" >&6 -target=$ac_cv_target -target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -# The aliases save the names the user supplied, while $host etc. -# will get canonicalized. -test -n "$target_alias" && - test "$program_prefix$program_suffix$program_transform_name" = \ - NONENONEs,x,x, && - program_prefix=${target_alias}- -test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. -# By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed - - -am__api_version="1.6" - - - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - # Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - echo "$as_me:$LINENO: checking for -p flag to install" >&5 -echo $ECHO_N "checking for -p flag to install... $ECHO_C" >&6 - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6 - fi - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi - -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AWK" && break -done - -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="$(MAKE)"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - - # test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } -fi - -# Define the identity of the package. - PACKAGE=mallory - VERSION=1.0 - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -install_sh=${install_sh-"$am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. - - - - - unset CDPATH - - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superflous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - # Check whether --enable-fast-perl or --disable-fast-perl was given. -if test "${enable_fast_perl+set}" = set; then - enableval="$enable_fast_perl" - with_fast_perl=$enableval -else - with_fast_perl=yes -fi; - - - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - - - - -# Add the stamp file to the list of files AC keeps track of, -# along with our hook. - ac_config_headers="$ac_config_headers config.h" - - - -rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null - - - ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 -rm -f confinc confmf - -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" - -fi; -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - - -if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - - - - # Check whether --enable-debug or --disable-debug was given. -if test "${enable_debug+set}" = set; then - enableval="$enable_debug" - - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - -else - kde_use_debug_code="no" - kde_use_debug_define=no - -fi; - - # Check whether --enable-dummyoption or --disable-dummyoption was given. -if test "${enable_dummyoption+set}" = set; then - enableval="$enable_dummyoption" - -fi; - - # Check whether --enable-strict or --disable-strict was given. -if test "${enable_strict+set}" = set; then - enableval="$enable_strict" - - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - -else - kde_use_strict_options="no" -fi; - - # Check whether --enable-warnings or --disable-warnings was given. -if test "${enable_warnings+set}" = set; then - enableval="$enable_warnings" - - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - -else - kde_use_warnings="yes" -fi; - - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - # Check whether --enable-profile or --disable-profile was given. -if test "${enable_profile+set}" = set; then - enableval="$enable_profile" - kde_use_profiling=$enableval -else - kde_use_profiling="no" - -fi; - - CFLAGS=" $CFLAGS" - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CC" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 $CFLAGS" - else - CFLAGS="-g -O2 $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - echo "$as_me:$LINENO: result: $CXX" >&5 -echo "${ECHO_T}$CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -echo "${ECHO_T}$ac_ct_CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CXX" && break -done -test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - - CXX=$ac_ct_CXX -fi - - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C++ compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -GXX=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -CXXFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cxx_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cxx_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cxx_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -depcc="$CXX" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_CXX_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_CXX_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CXX_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6 -CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - - - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 $CXXFLAGS" - else - CXXFLAGS="-g -O2 $CXXFLAGS" - fi - fi - -echo "$as_me:$LINENO: checking whether $CXX supports -fno-builtin" >&5 -echo $ECHO_N "checking whether $CXX supports -fno-builtin... $ECHO_C" >&6 -kde_cache=`echo fno-builtin | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -fno-builtin" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="-fno-builtin $CXXFLAGS" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - - -echo "$as_me:$LINENO: checking whether $CXX supports -Woverloaded-virtual" >&5 -echo $ECHO_N "checking whether $CXX supports -Woverloaded-virtual... $ECHO_C" >&6 -kde_cache=`echo Woverloaded-virtual | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Woverloaded-virtual" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - WOVERLOADED_VIRTUAL="-Woverloaded-virtual" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - WOVERLOADED_VRITUAL="" -fi - - - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - -echo "$as_me:$LINENO: checking whether $CXX supports -pg" >&5 -echo $ECHO_N "checking whether $CXX supports -pg... $ECHO_C" >&6 -kde_cache=`echo pg | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -pg" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - case $host in - *-*-linux-gnu) - CFLAGS="-ansi -W -Wall -pedantic -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" - -echo "$as_me:$LINENO: checking whether $CXX supports -Wmissing-format-attribute" >&5 -echo $ECHO_N "checking whether $CXX supports -Wmissing-format-attribute... $ECHO_C" >&6 -kde_cache=`echo Wmissing-format-attribute | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Wmissing-format-attribute" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"; CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - ;; - esac - CXXFLAGS="-Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - -echo "$as_me:$LINENO: checking whether $CXX supports -Wundef" >&5 -echo $ECHO_N "checking whether $CXX supports -Wundef... $ECHO_C" >&6 -kde_cache=`echo Wundef | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Wundef" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="-Wundef $CXXFLAGS" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports -Wno-long-long" >&5 -echo $ECHO_N "checking whether $CXX supports -Wno-long-long... $ECHO_C" >&6 -kde_cache=`echo Wno-long-long | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Wno-long-long" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="-Wno-long-long $CXXFLAGS" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports -Wnon-virtual-dtor" >&5 -echo $ECHO_N "checking whether $CXX supports -Wnon-virtual-dtor... $ECHO_C" >&6 -kde_cache=`echo Wnon-virtual-dtor | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Wnon-virtual-dtor" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - if test "$GXX" = "yes"; then - -echo "$as_me:$LINENO: checking whether $CXX supports -fno-exceptions" >&5 -echo $ECHO_N "checking whether $CXX supports -fno-exceptions... $ECHO_C" >&6 -kde_cache=`echo fno-exceptions | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -fno-exceptions" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS -fno-exceptions" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports -fno-check-new" >&5 -echo $ECHO_N "checking whether $CXX supports -fno-check-new... $ECHO_C" >&6 -kde_cache=`echo fno-check-new | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -fno-check-new" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS -fno-check-new" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports -fno-common" >&5 -echo $ECHO_N "checking whether $CXX supports -fno-common... $ECHO_C" >&6 -kde_cache=`echo fno-common | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -fno-common" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS -fno-common" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports -fexceptions" >&5 -echo $ECHO_N "checking whether $CXX supports -fexceptions... $ECHO_C" >&6 -kde_cache=`echo fexceptions | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -fexceptions" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - USE_EXCEPTIONS="-fexceptions" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - USE_EXCEPTIONS= -fi - - fi - if test "$CXX" = "KCC"; then - - # Check whether --enable-pch or --disable-pch was given. -if test "${enable_pch+set}" = set; then - enableval="$enable_pch" - - kde_use_pch=$enableval - -else - kde_use_pch=no -fi; - - if test "$kde_use_pch" = "yes"; then - -echo "$as_me:$LINENO: checking whether $CXX supports --pch" >&5 -echo $ECHO_N "checking whether $CXX supports --pch... $ECHO_C" >&6 -kde_cache=`echo -pch | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS --pch" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS --pch" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - fi - -echo "$as_me:$LINENO: checking whether $CXX supports --inline_keyword_space_time=6" >&5 -echo $ECHO_N "checking whether $CXX supports --inline_keyword_space_time=6... $ECHO_C" >&6 -kde_cache=`echo -inline_keyword_space_time=6 | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports --inline_auto_space_time=2" >&5 -echo $ECHO_N "checking whether $CXX supports --inline_auto_space_time=2... $ECHO_C" >&6 -kde_cache=`echo -inline_auto_space_time=2 | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports --inline_implicit_space_time=2.0" >&5 -echo $ECHO_N "checking whether $CXX supports --inline_implicit_space_time=2.0... $ECHO_C" >&6 -kde_cache=`echo -inline_implicit_space_time=2.0 | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports --inline_generated_space_time=2.0" >&5 -echo $ECHO_N "checking whether $CXX supports --inline_generated_space_time=2.0... $ECHO_C" >&6 -kde_cache=`echo -inline_generated_space_time=2.0 | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - -echo "$as_me:$LINENO: checking whether $CXX supports --one_per" >&5 -echo $ECHO_N "checking whether $CXX supports --one_per... $ECHO_C" >&6 -kde_cache=`echo -one_per | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS --one_per" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - CXXFLAGS="$CXXFLAGS --one_per" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - fi - - USE_RTTI= - - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - { { echo "$as_me:$LINENO: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" >&5 -echo "$as_me: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" >&2;} - { (exit 1); exit 1; }; } - fi - fi - ;; - esac - - if test "x$kde_use_qt_emb" != "xyes"; then - __val=$CXX - __forbid=" -fno-rtti -rpath " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXX, removing it" >&5 -echo "$as_me: WARNING: found forbidden $i in CXX, removing it" >&2;} ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - CXX=$__new - fi - - __val=$CXXFLAGS - __forbid=" -fno-rtti -rpath " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXXFLAGS, removing it" >&5 -echo "$as_me: WARNING: found forbidden $i in CXXFLAGS, removing it" >&2;} ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - CXXFLAGS=$__new - fi - -else - __val=$CXX - __forbid=" -rpath " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXX, removing it" >&5 -echo "$as_me: WARNING: found forbidden $i in CXX, removing it" >&2;} ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - CXX=$__new - fi - - __val=$CXXFLAGS - __forbid=" -rpath " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) { echo "$as_me:$LINENO: WARNING: found forbidden $i in CXXFLAGS, removing it" >&5 -echo "$as_me: WARNING: found forbidden $i in CXXFLAGS, removing it" >&2;} ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - CXXFLAGS=$__new - fi - -fi - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - -echo "$as_me:$LINENO: checking whether $CXX supports -O0" >&5 -echo $ECHO_N "checking whether $CXX supports -O0... $ECHO_C" >&6 -kde_cache=`echo O0 | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -O0" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - NOOPT_CXXFLAGS=-O0 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - - - - - - # Check whether --enable-final or --disable-final was given. -if test "${enable_final+set}" = set; then - enableval="$enable_final" - kde_use_final=$enableval -else - kde_use_final=no -fi; - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - - - - - # Check whether --enable-closure or --disable-closure was given. -if test "${enable_closure+set}" = set; then - enableval="$enable_closure" - kde_use_closure=$enableval -else - kde_use_closure=yes -fi; - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - -echo "$as_me:$LINENO: checking whether $CXX supports -Wl,--no-undefined" >&5 -echo $ECHO_N "checking whether $CXX supports -Wl,--no-undefined... $ECHO_C" >&6 -kde_cache=`echo Wl,--no-undefined | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Wl,--no-undefined" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - -echo "$as_me:$LINENO: checking whether $CXX supports -Wl,--allow-shlib-undefined" >&5 -echo $ECHO_N "checking whether $CXX supports -Wl,--allow-shlib-undefined... $ECHO_C" >&6 -kde_cache=`echo Wl,--allow-shlib-undefined | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -Wl,--allow-shlib-undefined" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - KDE_NO_UNDEFINED="" -fi - -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - KDE_NO_UNDEFINED="" -fi - - fi - - - - - - # Check whether --enable-nmcheck or --disable-nmcheck was given. -if test "${enable_nmcheck+set}" = set; then - enableval="$enable_nmcheck" - kde_use_nmcheck=$enableval -else - kde_use_nmcheck=no -fi; - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - - - - - - -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi; - -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=no -fi; - - - - - tdelibsuff=none - # Check whether --enable-libsuffix or --disable-libsuffix was given. -if test "${enable_libsuffix+set}" = set; then - enableval="$enable_libsuffix" - tdelibsuff=$enableval -fi; - # TODO: add an auto case that compiles a little C app to check - # where the glibc is - if test "$tdelibsuff" = "none"; then - tdelibsuff= - fi - if test -z "$tdelibsuff"; then - echo "$as_me:$LINENO: result: not using lib directory suffix" >&5 -echo "${ECHO_T}not using lib directory suffix" >&6 - -cat >>confdefs.h <<\_ACEOF -#define KDELIBSUFF "" -_ACEOF - - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${tdelibsuff}" - libdir="$libdir" - fi - -cat >>confdefs.h <<_ACEOF -#define KDELIBSUFF "\"${tdelibsuff}\"" -_ACEOF - - echo "$as_me:$LINENO: result: using lib directory suffix $tdelibsuff" >&5 -echo "${ECHO_T}using lib directory suffix $tdelibsuff" >&6 - fi - -# Check whether --enable-fast-install or --disable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval="$enable_fast_install" - p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi; - - -# Check whether --with-gnu-ld or --without-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval="$with_gnu_ld" - test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi; -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 -else - echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - lt_cv_prog_gnu_ld=yes -else - lt_cv_prog_gnu_ld=no -fi -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 -with_gnu_ld=$lt_cv_prog_gnu_ld - - -echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' - -echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - if ("$tmp_nm" -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then - lt_cv_path_NM="$tmp_nm -B" - break - elif ("$tmp_nm" -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - lt_cv_path_NM="$tmp_nm -p" - break - else - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi -echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -echo "${ECHO_T}$lt_cv_path_NM" >&6 -NM="$lt_cv_path_NM" - -echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 -if test "${lt_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" - fi - done - done -done - - # Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. -: ${TMPDIR=/tmp} -{ - tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=$TMPDIR/sed$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in $TMPDIR" >&2 - { (exit 1); exit 1; } -} - _max=0 - _count=0 - # Add /usr/xpg4/bin/sed as it is typically found on Solaris - # along with /bin/sed that truncates output. - for _sed in $_sed_list /usr/xpg4/bin/sed; do - test ! -f ${_sed} && break - cat /dev/null > "$tmp/sed.in" - _count=0 - echo $ECHO_N "0123456789$ECHO_C" >"$tmp/sed.in" - # Check for GNU sed and select it if it is found. - if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then - lt_cv_path_SED=${_sed} - break; - fi - while true; do - cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" - mv "$tmp/sed.tmp" "$tmp/sed.in" - cp "$tmp/sed.in" "$tmp/sed.nl" - echo >>"$tmp/sed.nl" - ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break - cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break - # 10000 chars as input seems more than enough - test $_count -gt 10 && break - _count=`expr $_count + 1` - if test $_count -gt $_max; then - _max=$_count - lt_cv_path_SED=$_sed - fi - done - done - rm -rf "$tmp" - -fi - -echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6 - -echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6 -fi - -echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5 -echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6 -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given egrep regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi4*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin* | mingw* | pw32*) - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' - lt_cv_file_magic_cmd='/usr/bin/file -L' - case "$host_os" in - rhapsody* | darwin1.[012]) - lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` - ;; - *) # Darwin 1.3 on - lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' - ;; - esac - ;; - -freebsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - if test "$host_cpu" = ia64; then - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - else - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - fi - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - esac - ;; - -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 6706 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-linux*) - # Test if the compiler is 64bit - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *"ELF 32"*) - LINUX_64_MODE="32" - ;; - *"ELF 64"*) - LINUX_64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -lt_cv_cc_needs_belf=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -esac - -need_locks="$enable_libtool_lock" - - - -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! - -# find the maximum length of command line arguments -echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6 -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - i=0 - testring="ABCD" - - case $host_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring=$testring$testring - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6 -else - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 -fi - - - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6 -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -solaris* | sysv5*) - symcode='[BDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $host_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then - symcode='[ABCDGISTW]' -fi - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if egrep ' nm_test_var$' "$nlist" >/dev/null; then - if egrep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6 -else - echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6 -fi - -echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6 -if test "${lt_cv_objdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -echo "${ECHO_T}$lt_cv_objdir" >&6 -objdir=$lt_cv_objdir - - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6 -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - egrep "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -enable_dlopen=no -enable_win32_dll=no - -# Check whether --enable-libtool-lock or --disable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval="$enable_libtool_lock" - -fi; -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - - -# Check whether --with-pic or --without-pic was given. -if test "${with_pic+set}" = set; then - withval="$with_pic" - pic_mode="$withval" -else - pic_mode=default -fi; -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='main(){return(0);}' - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - - -# -# Check for any special shared library compilation flags. -# -lt_prog_cc_shlib= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - lt_prog_cc_shlib='-belf' - ;; - esac -fi -if test -n "$lt_prog_cc_shlib"; then - { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5 -echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;} - if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then : - else - { echo "$as_me:$LINENO: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 -echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} - lt_cv_prog_cc_can_build_shared=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -echo "$as_me:$LINENO: checking if $compiler static flag $lt_prog_compiler_static works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6 -if test "${lt_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_prog_compiler_static" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_prog_compiler_static_works=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_prog_compiler_static_works" >&6 - -if test x"$lt_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - -lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic='-fPIC' - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic='+Z' - fi - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - linux*) - if test "$CC" = "icc"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - fi - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - sco3.2v5*) - lt_prog_compiler_pic='-Kpic' - lt_prog_compiler_static='-dn' - ;; - - solaris*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - if test "x$host_vendor" = xsni; then - lt_prog_compiler_wl='-LD' - else - lt_prog_compiler_wl='-Wl,' - fi - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic" >&6 - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_prog_compiler_pic -DPIC" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_prog_compiler_pic_works=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6 - -if test x"$lt_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - else - lt_cv_prog_compiler_c_o=yes - fi - fi - CFLAGS="$save_CFLAGS" - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6 - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 - - runpath_var= - allow_undefined_flag= - - archive_cmds= - archive_cmds_need_lc= - archive_expsym_cmds= - old_archive_From_new_cmds= - old_archive_from_expsyms_cmds= - export_dynamic_flag_spec= - whole_archive_flag_spec= - thread_safe_flag_spec= - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - link_all_deplibs=unknown - always_export_symbols=no - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an egrep regular expression of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left by newer dlltools. - export_symbols_cmds="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - ;; - esac - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - - if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct=yes - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - always_export_symbols=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec=' ' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - bsdi4*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag='-flat_namespace -undefined suppress' - ;; - esac - - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #_LT_AC_TAGVAR(archive_expsym_cmds, )="$_LT_AC_TAGVAR(archive_cmds, )"' && strip -s $export_symbols' - hardcode_direct=yes - hardcode_shlibpath_var=no - whole_archive_flag_spec='-all_load $convenience' - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9* | hpux10* | hpux11*) - if test "$GCC" = yes; then - case $host_os in - hpux9*) - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - esac - else - case $host_os in - hpux9*) - archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - ;; - esac - fi - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=no - hardcode_shlibpath_var=no - else - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - fi - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - hardcode_direct=yes - hardcode_shlibpath_var=no - - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - sco3.2v5*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - no_undefined_flag=' -z text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - if test "x$host_vendor" = xsni; then - archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - else - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=no - hardcode_shlibpath_var=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv5*) - no_undefined_flag=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec= - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - fi - -echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6 -test "$ld_shlibs" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -archive_cmds_need_lc=yes -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -echo "${ECHO_T}$archive_cmds_need_lc" >&6 - ;; - esac -fi - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var "; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6 - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"` - if echo "$sys_lib_search_path_spec" | egrep ';[C-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.01* | freebsdelf3.01*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - if test "$host_cpu" = ia64; then - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - else - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - fi - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -# Report which librarie types wil actually be built -echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6 - -echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6 - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler \ - CC \ - LD \ - lt_prog_compiler_wl \ - lt_prog_compiler_pic \ - lt_prog_compiler_static \ - lt_prog_compiler_no_builtin_flag \ - export_dynamic_flag_spec \ - thread_safe_flag_spec \ - whole_archive_flag_spec \ - old_archive_cmds \ - old_archive_from_new_cmds \ - predep_objects \ - postdep_objects \ - predeps \ - postdeps \ - compiler_lib_search_path \ - archive_cmds \ - archive_expsym_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - old_archive_from_expsyms_cmds \ - allow_undefined_flag \ - no_undefined_flag \ - export_symbols_cmds \ - hardcode_libdir_flag_spec \ - hardcode_libdir_separator \ - lt_cv_prog_compiler_c_o \ - exclude_expsyms \ - include_expsyms; do - - case $var in - old_archive_cmds | \ - old_archive_from_new_cmds | \ - archive_cmds | \ - archive_expsym_cmds | \ - old_archive_from_expsyms_cmds | \ - export_symbols_cmds | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - { echo "$as_me:$LINENO: creating $ofile" >&5 -echo "$as_me: creating $ofile" >&6;} - - cat <<__EOF__ >> "$cfgfile" -#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - - cygwin* | mingw* | pw32* | os2*) - cat <<'EOF' >> "$cfgfile" - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments - -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments - -# /* impgen.c starts here */ -# /* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# /* O_BINARY isn't required (or even defined sometimes) under Unix */ -# #ifndef O_BINARY -# #define O_BINARY 0 -# #endif -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (dll < 1) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - -# Check whether --with-tags or --without-tags was given. -if test "${with_tags+set}" = set; then - withval="$with_tags" - tagnames="$withval" -else - tagnames="CXX,GCJ" - case $host_os in - mingw*|cygwin*) tagnames="$tagnames,RC" ;; - esac -fi; - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 -echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 -echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} - else - { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 -echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} - fi - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in - "") ;; - *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 -echo "$as_me: error: invalid tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 -echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} - { (exit 1); exit 1; }; } - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - - -archive_cmds_need_lc_CXX=no -allow_undefined_flag_CXX= -always_export_symbols_CXX=no -archive_expsym_cmds_CXX= -export_dynamic_flag_spec_CXX= -hardcode_direct_CXX=no -hardcode_libdir_flag_spec_CXX= -hardcode_libdir_separator_CXX= -hardcode_minus_L_CXX=no -link_all_deplibs_CXX=unknown -old_archive_cmds_CXX=$old_archive_cmds -no_undefined_flag_CXX= -whole_archive_flag_spec_CXX= - -# Dependencies to place before and after the object being linked: -predep_objects_CXX= -postdep_objects_CXX= -predeps_CXX= -postdeps_CXX= -compiler_lib_search_path_CXX= - -# Source file extension for C test sources. -ac_ext=cc - -# Object file extension for compiled C test sources. -objext=o -objext_CXX=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int char *) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${CXX-"c++"} -set dummy $CC -compiler="$2" -compiler_CXX=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' -else - lt_prog_compiler_no_builtin_flag_CXX= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ - egrep 'GNU ld' > /dev/null; then - with_gnu_ld=yes - - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_CXX= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 -ld_shlibs_CXX=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_CXX='' - hardcode_direct_CXX=yes - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - - if test "$GXX" = yes; then - case $host_os in aix4.012|aix4.012.*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_CXX=yes - else - # We have old collect2 - hardcode_direct_CXX=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_CXX=yes - hardcode_libdir_flag_spec_CXX='-L$libdir' - hardcode_libdir_separator_CXX= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - always_export_symbols_CXX=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - - archive_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_CXX=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX=' ' - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - ghcx) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - freebsd12*) - # C++ shared libraries reported to be fairly broken before switch to ELF - ld_shlibs_CXX=no - ;; - freebsd-elf*) - archive_cmds_need_lc_CXX=no - ;; - freebsd*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - ld_shlibs_CXX=yes - ;; - gnu*) - ;; - hpux*) - if test $with_gnu_ld = no; then - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='-L$libdir' - else - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - fi - fi - if test "$host_cpu" = ia64; then - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - else - hardcode_direct_CXX=yes - fi - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC) - case $host_os in - hpux9*) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_os in - hpux9*) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - else - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - fi - ;; - esac - fi - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC) - # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' - fi - fi - link_all_deplibs_CXX=yes - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - ;; - linux*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc) - # Intel C++ - with_gnu_ld=yes - archive_cmds_need_lc_CXX=no - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - cxx) - # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - m88k*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - mvs*) - case $cc_basename in - cxx) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - netbsd*) - # NetBSD uses g++ - do we need to do anything? - ;; - osf3*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx) - allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ - $rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' - - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - sco*) - archive_cmds_need_lc_CXX=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - lcc) - # Lucid - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_shlibpath_var_CXX=no - case $host_os in - solaris2.0-5 | solaris2.0-5.*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. - # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - link_all_deplibs_CXX=yes - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - gcx) - # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | egrep -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" - fi - - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - archive_cmds_need_lc_CXX=no - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; -esac -echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -echo "${ECHO_T}$ld_shlibs_CXX" >&6 -test "$ld_shlibs_CXX" = no && can_build_shared=no - -# Figure out "hidden" C++ library dependencies from verbose -# compiler output whening linking a shared library. -cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" - - for p in `eval $output_verbose_link_cmd`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" - else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" - else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi - ;; - - *.$objext|*.$libext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" - else - predep_objects_CXX="$predep_objects_CXX $p" - fi - else - if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" - else - postdep_objects_CXX="$postdep_objects_CXX $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out -else - echo "libtool.m4: error: problem compiling C++ test program" -fi - -$rm -f confest.$objext - -case " $postdeps_CXX " in -*" -lc "*) archive_cmds_need_lc_CXX=no ;; -*) archive_cmds_need_lc_CXX=yes ;; -esac - -GCC_CXX="$GXX" -LD_CXX="$LD" - -lt_prog_compiler_wl_CXX= -lt_prog_compiler_pic_CXX= -lt_prog_compiler_static_CXX= - -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - cygwin* | mingw* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_CXX='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='-fPIC' - fi - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - else - lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - lt_prog_compiler_pic_CXX='-KPIC' - ;; - ghcx) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - freebsd*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - aCC) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC) - # KAI C++ Compiler - lt_prog_compiler_wl_CXX='--backend -Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - ;; - icpc) - # Intel C++ - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-static' - ;; - cxx) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx) - lt_prog_compiler_pic_CXX='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC) - lt_prog_compiler_wl_CXX='--backend -Wl,' - ;; - RCC) - # Rational C++ 2.4.1 - lt_prog_compiler_pic_CXX='-pic' - ;; - cxx) - # Digital/Compaq C++ - lt_prog_compiler_wl_CXX='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - gcx) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - lt_prog_compiler_pic_CXX='-pic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - lcc) - # Lucid - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - lt_prog_compiler_pic_CXX='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - lt_prog_compiler_can_build_shared_CXX=no - ;; - esac - fi - -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6 - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_CXX"; then - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_pic_works_CXX=no - ac_outfile=conftest.$ac_objext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_prog_compiler_pic_CXX -DPIC" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_prog_compiler_pic_works_CXX=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6 - -if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then - case $lt_prog_compiler_pic_CXX in - "" | " "*) ;; - *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; - esac -else - lt_prog_compiler_pic_CXX= - lt_prog_compiler_can_build_shared_CXX=no -fi - -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_CXX= - ;; - *) - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; -esac - -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - else - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - CXXFLAGS="$save_CXXFLAGS" - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6 - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 - - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - ;; - cygwin* | mingw* | pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - -echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -echo "${ECHO_T}$ld_shlibs_CXX" >&6 -test "$ld_shlibs_CXX" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -archive_cmds_need_lc_CXX=yes -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_CXX in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_CXX=no - else - archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 -echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6 - ;; - esac -fi - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action_CXX= -if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var CXX"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_CXX" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_CXX=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_CXX=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_CXX=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 -echo "${ECHO_T}$hardcode_action_CXX" >&6 - -if test "$hardcode_action_CXX" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"` - if echo "$sys_lib_search_path_spec" | egrep ';[C-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.01* | freebsdelf3.01*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - if test "$host_cpu" = ia64; then - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - else - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - fi - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_CXX \ - CC_CXX \ - LD_CXX \ - lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ - lt_prog_compiler_static_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ - export_dynamic_flag_spec_CXX \ - thread_safe_flag_spec_CXX \ - whole_archive_flag_spec_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - predep_objects_CXX \ - postdep_objects_CXX \ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX \ - archive_cmds_CXX \ - archive_expsym_cmds_CXX \ - postinstall_cmds_CXX \ - postuninstall_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - export_symbols_cmds_CXX \ - hardcode_libdir_flag_spec_CXX \ - hardcode_libdir_separator_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX; do - - case $var in - old_archive_cmds_CXX | \ - old_archive_from_new_cmds_CXX | \ - archive_cmds_CXX | \ - archive_expsym_cmds_CXX | \ - old_archive_from_expsyms_cmds_CXX | \ - export_symbols_cmds_CXX | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_CXX - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_compiler_CXX - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_CXX - -# The linker used to build libraries. -LD=$lt_LD_CXX - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_CXX - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_CXX - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_CXX -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_CXX -archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_CXX - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_CXX - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_CXX - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_CXX - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_CXX - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_CXX - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_CXX - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_CXX - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_CXX - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_CXX" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_CXX - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_CXX - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_CXX - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_CXX - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - ;; - - GCJ) - - - -# Source file extension for C test sources. -ac_ext=java - -# Object file extension for compiled C test sources. -objext=o -objext_GCJ=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -set dummy $CC -compiler="$2" -compiler_GCJ=$CC - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -archive_cmds_need_lc_GCJ=no - - -lt_prog_compiler_no_builtin_flag_GCJ= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' - - echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6 - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" -else - : -fi - -fi - -lt_prog_compiler_wl_GCJ= -lt_prog_compiler_pic_GCJ= -lt_prog_compiler_static_GCJ= - -echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 - - if test "$GCC" = yes; then - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_static_GCJ='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_GCJ='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_GCJ=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_GCJ=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX, but not for PA HP-UX. - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_GCJ='-fPIC' - fi - ;; - - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_GCJ='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - else - lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - cygwin* | mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_GCJ='-Wl,' - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_GCJ='+Z' - fi - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - - newsos6) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - linux*) - if test "$CC" = "icc"; then - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-static' - fi - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - - sco3.2v5*) - lt_prog_compiler_pic_GCJ='-Kpic' - lt_prog_compiler_static_GCJ='-dn' - ;; - - solaris*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - sunos4*) - lt_prog_compiler_wl_GCJ='-Qoption ld ' - lt_prog_compiler_pic_GCJ='-PIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - if test "x$host_vendor" = xsni; then - lt_prog_compiler_wl_GCJ='-LD' - else - lt_prog_compiler_wl_GCJ='-Wl,' - fi - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_GCJ='-Kconform_pic' - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; - - uts4*) - lt_prog_compiler_pic_GCJ='-pic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared_GCJ=no - ;; - esac - fi - -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6 - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_GCJ"; then - echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6 -if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_prog_compiler_pic_works_GCJ=no - ac_outfile=conftest.$ac_objext - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS $lt_prog_compiler_pic_GCJ -DPIC" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - else - lt_prog_compiler_pic_works_GCJ=yes - fi - fi - $rm conftest* - CFLAGS="$save_CFLAGS" - -fi -echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6 - -if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then - case $lt_prog_compiler_pic_GCJ in - "" | " "*) ;; - *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; - esac -else - lt_prog_compiler_pic_GCJ= - lt_prog_compiler_can_build_shared_GCJ=no -fi - -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_GCJ= - ;; - *) - lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ -DPIC" - ;; -esac - -echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 -if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o_GCJ=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - save_GCJFLAGS="$GCJFLAGS" - GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext" - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s out/conftest.err; then - # Append any errors to the config.log. - cat out/conftest.err 1>&5 - else - lt_cv_prog_compiler_c_o_GCJ=yes - fi - fi - GCJFLAGS="$save_GCJFLAGS" - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6 - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6 - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6 - - runpath_var= - allow_undefined_flag_GCJ= - - archive_cmds_GCJ= - archive_cmds_need_lc_GCJ= - archive_expsym_cmds_GCJ= - old_archive_From_new_cmds_GCJ= - old_archive_from_expsyms_cmds_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - thread_safe_flag_spec_GCJ= - hardcode_libdir_flag_spec_GCJ= - hardcode_libdir_separator_GCJ= - hardcode_direct_GCJ=no - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=unsupported - link_all_deplibs_GCJ=unknown - always_export_symbols_GCJ=no - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_GCJ= - # exclude_expsyms can be an egrep regular expression of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs_GCJ=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_GCJ=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_GCJ=no - ;; - - beos*) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_GCJ=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_GCJ='-L$libdir' - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=yes - - extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ - sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ - test -f $output_objdir/impgen.exe || (cd $output_objdir && \ - if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ - else $CC -o impgen impgen.c ; fi)~ - $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' - - old_archive_from_expsyms_cmds_GCJ='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' - - # cygwin and mingw dlls have different entry points and sets of symbols - # to exclude. - # FIXME: what about values for MSVC? - dll_entry=__cygwin_dll_entry@12 - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ - case $host_os in - mingw*) - # mingw values - dll_entry=_DllMainCRTStartup@12 - dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ - ;; - esac - - # mingw and cygwin differ, and it's simplest to just exclude the union - # of the two symbol sets. - dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 - - # recent cygwin and mingw systems supply a stub DllMain which the user - # can override, but on older systems we have to supply one (in ltdll.c) - if test "x$lt_cv_need_dllmain" = "xyes"; then - ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " - ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ - test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' - else - ltdll_obj= - ltdll_cmds= - fi - - # Extract the symbol export list from an `--export-all' def file, - # then regenerate the def file from the symbol export list, so that - # the compiled dll only exports the symbol export list. - # Be careful not to strip the DATA tag left by newer dlltools. - export_symbols_cmds_GCJ="$ltdll_cmds"' - $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ - sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' - - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is. - # If DATA tags from a recent dlltool are present, honour them! - archive_expsym_cmds_GCJ='if test "x`head -n 1 $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname-def; - else - echo EXPORTS > $output_objdir/$soname-def; - _lt_hint=1; - cat $export_symbols | while read symbol; do - set dummy \$symbol; - case \$# in - 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; - *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; - esac; - _lt_hint=`expr 1 + \$_lt_hint`; - done; - fi~ - '"$ltdll_cmds"' - $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ - $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ - $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ - $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_GCJ='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then - ld_shlibs_GCJ=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - sunos4*) - archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - *) - if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - - if test "$ld_shlibs_GCJ" = yes; then - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - case $host_os in - cygwin* | mingw* | pw32*) - # dlltool doesn't understand --whole-archive et. al. - whole_archive_flag_spec_GCJ= - ;; - *) - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= - fi - ;; - esac - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=yes - archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_GCJ=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_GCJ=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | egrep '(GNU)' > /dev/null; then - export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_GCJ='' - hardcode_direct_GCJ=yes - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - - if test "$GCC" = yes; then - case $host_os in aix4.012|aix4.012.*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - hardcode_direct_GCJ=yes - else - # We have old collect2 - hardcode_direct_GCJ=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_GCJ=yes - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_libdir_separator_GCJ= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - always_export_symbols_GCJ=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_GCJ='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_GCJ=' ${wl}-bernotok' - allow_undefined_flag_GCJ=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - always_export_symbols_GCJ=yes - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_GCJ=' ' - archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds it's shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_GCJ=no - ;; - - bsdi4*) - export_dynamic_flag_spec_GCJ=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_GCJ=' ' - allow_undefined_flag_GCJ=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # FIXME: Setting linknames here is a bad hack. - archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_GCJ='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - ;; - - darwin* | rhapsody*) - case "$host_os" in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='-undefined suppress' - ;; - *) # Darwin 1.3 on - allow_undefined_flag_GCJ='-flat_namespace -undefined suppress' - ;; - esac - - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. Also zsh mangles - # `"' quotes if we put them in here... so don't! - archive_cmds_GCJ='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' - # We need to add '_' to the symbols in $export_symbols first - #_LT_AC_TAGVAR(archive_expsym_cmds, GCJ)="$_LT_AC_TAGVAR(archive_cmds, GCJ)"' && strip -s $export_symbols' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - whole_archive_flag_spec_GCJ='-all_load $convenience' - ;; - - dgux*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - freebsd1*) - ld_shlibs_GCJ=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd*) - archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - hpux9* | hpux10* | hpux11*) - if test "$GCC" = yes; then - case $host_os in - hpux9*) - archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - esac - else - case $host_os in - hpux9*) - archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - ;; - *) - if test "$host_cpu" = ia64; then - archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - else - archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - ;; - esac - fi - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - else - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - fi - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - link_all_deplibs_GCJ=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - newsos6) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_shlibpath_var_GCJ=no - ;; - - openbsd*) - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - ;; - *) - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - allow_undefined_flag_GCJ=unsupported - archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_GCJ='-rpath $libdir' - fi - hardcode_libdir_separator_GCJ=: - ;; - - sco3.2v5*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - no_undefined_flag_GCJ=' -z text' - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_shlibpath_var_GCJ=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; - esac - link_all_deplibs_GCJ=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4) - if test "x$host_vendor" = xsni; then - archive_cmds_GCJ='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes # is this really true??? - else - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4.3*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_GCJ=yes - fi - ;; - - sysv4.2uw2*) - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) - no_undefined_flag_GCJ='${wl}-z ${wl}text' - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - - sysv5*) - no_undefined_flag_GCJ=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - hardcode_libdir_flag_spec_GCJ= - hardcode_shlibpath_var_GCJ=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - *) - ld_shlibs_GCJ=no - ;; - esac - fi - -echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 -echo "${ECHO_T}$ld_shlibs_GCJ" >&6 -test "$ld_shlibs_GCJ" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -archive_cmds_need_lc_GCJ=yes -if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_GCJ in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 - $rm conftest* - echo 'static int dummy;' > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_GCJ - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ - allow_undefined_flag_GCJ= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_GCJ=no - else - archive_cmds_need_lc_GCJ=yes - fi - allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 -echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6 - ;; - esac -fi - -echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 -hardcode_action_GCJ= -if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var GCJ"; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_GCJ" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && - test "$hardcode_minus_L_GCJ" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_GCJ=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_GCJ=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_GCJ=unsupported -fi -echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 -echo "${ECHO_T}$hardcode_action_GCJ" >&6 - -if test "$hardcode_action_GCJ" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 -library_names_spec= -libname_spec='lib$name' -soname_spec= -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}.so$major' - ;; - -aix4* | aix5*) - version_type=linux - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}.so$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}.so' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - need_version=no - need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin*) - library_names_spec='$libname.dll.a' - sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog .libs/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - ;; - yes,mingw*) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://"` - if echo "$sys_lib_search_path_spec" | egrep ';[C-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | sed -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - yes,pw32*) - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' - ;; - *) - library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - # FIXME: Relying on posixy $() will cause problems for - # cross-compilation, but unfortunately the echo tests do not - # yet detect zsh echo's removal of \ escapes. - library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' - soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.01* | freebsdelf3.01*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - if test "$host_cpu" = ia64; then - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - else - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' - soname_spec='${libname}${release}.sl$major' - fi - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) version_type=irix ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' - soname_spec='${libname}${release}.so$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - need_lib_prefix=no - library_names_spec='$libname.dll $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}.so' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}.so$major' - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' - soname_spec='$libname.so.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' - soname_spec='${libname}${release}.so$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6 -test "$dynamic_linker" = no && can_build_shared=no - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - cygwin* | mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - *) - echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shl_load) || defined (__stub___shl_load) -choke me -#else -char (*f) () = shl_load; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shl_load; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6 -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" -else - echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_dlopen) || defined (__stub___dlopen) -choke me -#else -char (*f) () = dlopen; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != dlopen; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6 -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_svld_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dld_link (); -int -main () -{ -dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_dld_link=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6 - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_GCJ \ - CC_GCJ \ - LD_GCJ \ - lt_prog_compiler_wl_GCJ \ - lt_prog_compiler_pic_GCJ \ - lt_prog_compiler_static_GCJ \ - lt_prog_compiler_no_builtin_flag_GCJ \ - export_dynamic_flag_spec_GCJ \ - thread_safe_flag_spec_GCJ \ - whole_archive_flag_spec_GCJ \ - old_archive_cmds_GCJ \ - old_archive_from_new_cmds_GCJ \ - predep_objects_GCJ \ - postdep_objects_GCJ \ - predeps_GCJ \ - postdeps_GCJ \ - compiler_lib_search_path_GCJ \ - archive_cmds_GCJ \ - archive_expsym_cmds_GCJ \ - postinstall_cmds_GCJ \ - postuninstall_cmds_GCJ \ - old_archive_from_expsyms_cmds_GCJ \ - allow_undefined_flag_GCJ \ - no_undefined_flag_GCJ \ - export_symbols_cmds_GCJ \ - hardcode_libdir_flag_spec_GCJ \ - hardcode_libdir_separator_GCJ \ - lt_cv_prog_compiler_c_o_GCJ \ - exclude_expsyms_GCJ \ - include_expsyms_GCJ; do - - case $var in - old_archive_cmds_GCJ | \ - old_archive_from_new_cmds_GCJ | \ - archive_cmds_GCJ | \ - archive_expsym_cmds_GCJ | \ - old_archive_from_expsyms_cmds_GCJ | \ - export_symbols_cmds_GCJ | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_GCJ - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_compiler_GCJ - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_GCJ - -# The linker used to build libraries. -LD=$lt_LD_GCJ - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_GCJ - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_GCJ -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_GCJ - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_GCJ -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_GCJ -archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_GCJ - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_GCJ - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_GCJ - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_GCJ - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_GCJ - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_GCJ - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_GCJ - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_GCJ - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_GCJ" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_GCJ - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_GCJ - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_GCJ - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_GCJ - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - ;; - - RC) - - - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -objext_RC=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -set dummy $CC -compiler="$2" - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -set dummy $CC -compiler="$2" -compiler_RC=$CC -lt_cv_prog_compiler_c_o_RC=yes - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS RANLIB LN_S LTCC NM SED SHELL \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_RC \ - CC_RC \ - LD_RC \ - lt_prog_compiler_wl_RC \ - lt_prog_compiler_pic_RC \ - lt_prog_compiler_static_RC \ - lt_prog_compiler_no_builtin_flag_RC \ - export_dynamic_flag_spec_RC \ - thread_safe_flag_spec_RC \ - whole_archive_flag_spec_RC \ - old_archive_cmds_RC \ - old_archive_from_new_cmds_RC \ - predep_objects_RC \ - postdep_objects_RC \ - predeps_RC \ - postdeps_RC \ - compiler_lib_search_path_RC \ - archive_cmds_RC \ - archive_expsym_cmds_RC \ - postinstall_cmds_RC \ - postuninstall_cmds_RC \ - old_archive_from_expsyms_cmds_RC \ - allow_undefined_flag_RC \ - no_undefined_flag_RC \ - export_symbols_cmds_RC \ - hardcode_libdir_flag_spec_RC \ - hardcode_libdir_separator_RC \ - lt_cv_prog_compiler_c_o_RC \ - exclude_expsyms_RC \ - include_expsyms_RC; do - - case $var in - old_archive_cmds_RC | \ - old_archive_from_new_cmds_RC | \ - archive_cmds_RC | \ - archive_expsym_cmds_RC | \ - old_archive_from_expsyms_cmds_RC | \ - export_symbols_cmds_RC | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_RC - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_compiler_RC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_RC - -# The linker used to build libraries. -LD=$lt_LD_RC - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A sed program that does not truncate output. -SED=$lt_SED - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_RC - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_RC -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_RC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_RC -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_RC -archive_expsym_cmds=$lt_archive_expsym_cmds_RC -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_RC - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_RC - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_RC - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_RC - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_RC - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_RC - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_RC - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_RC - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_RC - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_RC - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$fix_srcfile_path_RC" - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_RC - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_RC - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_RC - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_RC - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - ;; - - *) - { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 -echo "$as_me: error: Unsupported tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - # Append the new tag name to the list of available tags. - available_tags="$available_tags $tagname" - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 -echo "$as_me: error: unable to update list of available tagged configurations." >&2;} - { (exit 1); exit 1; }; } - fi -fi - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' - -# Prevent multiple expansion - - - - - - - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" - - -# Check whether --enable-objprelink or --disable-objprelink was given. -if test "${enable_objprelink+set}" = set; then - enableval="$enable_objprelink" - kde_use_objprelink=$enableval -else - kde_use_objprelink=no -fi; - if test "x$kde_use_objprelink" = "xyes"; then - { echo "$as_me:$LINENO: WARNING: ------------------------------------------------------------- -Configuration option --enable-objprelink is no longer useful. -See http:://objprelink.sourceforge.net for details: -1- Recent binutils are fast enough to do without objprelink. -2- Newer versions of objprelink do not need this option. ------------------------------------------------------------- -" >&5 -echo "$as_me: WARNING: ------------------------------------------------------------- -Configuration option --enable-objprelink is no longer useful. -See http:://objprelink.sourceforge.net for details: -1- Recent binutils are fast enough to do without objprelink. -2- Newer versions of objprelink do not need this option. ------------------------------------------------------------- -" >&2;} - fi - - - - - # Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_MSGFMT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case "$MSGFMT" in - /*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then - ac_cv_path_MSGFMT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test -n "$MSGFMT"; then - echo "$as_me:$LINENO: result: $MSGFMT" >&5 -echo "${ECHO_T}$MSGFMT" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_GMSGFMT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT - -if test -n "$GMSGFMT"; then - echo "$as_me:$LINENO: result: $GMSGFMT" >&5 -echo "${ECHO_T}$GMSGFMT" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - echo "$as_me:$LINENO: result: found msgfmt program is not GNU msgfmt; ignore it" >&5 -echo "${ECHO_T}found msgfmt program is not GNU msgfmt; ignore it" >&6 - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - - - - # Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_XGETTEXT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case "$XGETTEXT" in - /*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test -n "$XGETTEXT"; then - echo "$as_me:$LINENO: result: $XGETTEXT" >&5 -echo "${ECHO_T}$XGETTEXT" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - - if test "$XGETTEXT" != ":"; then - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - echo "$as_me:$LINENO: result: found xgettext programs is not GNU xgettext; ignore it" >&5 -echo "${ECHO_T}found xgettext programs is not GNU xgettext; ignore it" >&6 - XGETTEXT=":" - fi - fi - - - - - -if test -z "3"; then - # Current default Qt version: 3.1 - kde_qtver=3 - kde_qtsubver=1 -else - kde_qtsubver=`echo "3" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'` - # following is the check if subversion isnt found in passed argument - if test "$kde_qtsubver" = "3"; then - kde_qtsubver=1 - fi - kde_qtver=`echo "3" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'` - if test "$kde_qtver" = "1"; then - kde_qtsubver=42 - fi -fi - -if test -z ""; then - if test "$kde_qtver" = "2"; then - if test $kde_qtsubver -gt 0; then - kde_qt_minversion=">= Qt 2.2.2" - else - kde_qt_minversion=">= Qt 2.0.2" - fi - fi - if test "$kde_qtver" = "3"; then - if test $kde_qtsubver -gt 0; then - kde_qt_minversion=">= Qt 3.1 (20021021)" - else - kde_qt_minversion=">= Qt 3.0" - fi - fi - if test "$kde_qtver" = "1"; then - kde_qt_minversion=">= 1.42 and < 2.0" - fi -else - kde_qt_minversion= -fi - -if test -z ""; then - if test $kde_qtver = 3; then - if test $kde_qtsubver -gt 0; then - kde_qt_verstring="TQT_VERSION >= 0x030100" - else - kde_qt_verstring="TQT_VERSION >= 300" - fi - fi - if test $kde_qtver = 2; then - if test $kde_qtsubver -gt 0; then - kde_qt_verstring="TQT_VERSION >= 222" - else - kde_qt_verstring="TQT_VERSION >= 200" - fi - fi - if test $kde_qtver = 1; then - kde_qt_verstring="TQT_VERSION >= 142 && TQT_VERSION < 200" - fi -else - kde_qt_verstring= -fi - -if test $kde_qtver = 3; then - kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3" -fi -if test $kde_qtver = 2; then - kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt" -fi -if test $kde_qtver = 1; then - kde_qt_dirs="$QTDIR /usr/lib/qt" -fi - - - -echo "$as_me:$LINENO: checking for strlcat" >&5 -echo $ECHO_N "checking for strlcat... $ECHO_C" >&6 -if test "${kde_cv_func_strlcat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -#include - - -int -main () -{ - - char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); - - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - kde_cv_func_strlcat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -kde_cv_func_strlcat=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - - -echo "$as_me:$LINENO: result: $kde_cv_func_strlcat" >&5 -echo "${ECHO_T}$kde_cv_func_strlcat" >&6 - -echo "$as_me:$LINENO: checking if strlcat needs custom prototype" >&5 -echo $ECHO_N "checking if strlcat needs custom prototype... $ECHO_C" >&6 -if test "${kde_cv_proto_strlcat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -if test "x$kde_cv_func_strlcat" = xyes; then - kde_cv_proto_strlcat=no -else - case "strlcat" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_strlcat="yes - in libtdefakes" - ;; - *) - kde_cv_proto_strlcat=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_strlcat" = xunknown; then - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -#include - - -extern "C" unsigned long strlcat(char*, const char*, unsigned long); - -int -main () -{ - - char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); - - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - kde_cv_func_strlcat=yes - kde_cv_proto_strlcat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -kde_cv_proto_strlcat="strlcat unavailable" - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$kde_safe_libs -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi - -fi - -echo "$as_me:$LINENO: result: $kde_cv_proto_strlcat" >&5 -echo "${ECHO_T}$kde_cv_proto_strlcat" >&6 - -if test "x$kde_cv_func_strlcat" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRLCAT 1 -_ACEOF - - -fi -if test "x$kde_cv_proto_strlcat" = xno; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRLCAT_PROTO 1 -_ACEOF - -fi - - - - - - - -echo "$as_me:$LINENO: checking for strlcpy" >&5 -echo $ECHO_N "checking for strlcpy... $ECHO_C" >&6 -if test "${kde_cv_func_strlcpy+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -#include - - -int -main () -{ - - char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); - - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - kde_cv_func_strlcpy=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -kde_cv_func_strlcpy=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - - -echo "$as_me:$LINENO: result: $kde_cv_func_strlcpy" >&5 -echo "${ECHO_T}$kde_cv_func_strlcpy" >&6 - -echo "$as_me:$LINENO: checking if strlcpy needs custom prototype" >&5 -echo $ECHO_N "checking if strlcpy needs custom prototype... $ECHO_C" >&6 -if test "${kde_cv_proto_strlcpy+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -if test "x$kde_cv_func_strlcpy" = xyes; then - kde_cv_proto_strlcpy=no -else - case "strlcpy" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_strlcpy="yes - in libtdefakes" - ;; - *) - kde_cv_proto_strlcpy=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_strlcpy" = xunknown; then - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -#include - - -extern "C" unsigned long strlcpy(char*, const char*, unsigned long); - -int -main () -{ - - char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); - - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - kde_cv_func_strlcpy=yes - kde_cv_proto_strlcpy=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -kde_cv_proto_strlcpy="strlcpy unavailable" - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$kde_safe_libs -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi - -fi - -echo "$as_me:$LINENO: result: $kde_cv_proto_strlcpy" >&5 -echo "${ECHO_T}$kde_cv_proto_strlcpy" >&6 - -if test "x$kde_cv_func_strlcpy" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRLCPY 1 -_ACEOF - - -fi -if test "x$kde_cv_proto_strlcpy" = xno; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRLCPY_PROTO 1 -_ACEOF - -fi - - - - - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - echo "$as_me:$LINENO: checking for main in -lutil" >&5 -echo $ECHO_N "checking for main in -lutil... $ECHO_C" >&6 -if test "${ac_cv_lib_util_main+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lutil $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -int -main () -{ -main (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_util_main=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_util_main=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_util_main" >&5 -echo "${ECHO_T}$ac_cv_lib_util_main" >&6 -if test $ac_cv_lib_util_main = yes; then - LIBUTIL="-lutil" -fi - - echo "$as_me:$LINENO: checking for main in -lcompat" >&5 -echo $ECHO_N "checking for main in -lcompat... $ECHO_C" >&6 -if test "${ac_cv_lib_compat_main+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lcompat $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -int -main () -{ -main (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_compat_main=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_compat_main=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_compat_main" >&5 -echo "${ECHO_T}$ac_cv_lib_compat_main" >&6 -if test $ac_cv_lib_compat_main = yes; then - LIBCOMPAT="-lcompat" -fi - - kde_have_crypt= - echo "$as_me:$LINENO: checking for crypt in -lcrypt" >&5 -echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6 -if test "${ac_cv_lib_crypt_crypt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lcrypt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char crypt (); -int -main () -{ -crypt (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_crypt_crypt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_crypt_crypt=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_crypt_crypt" >&5 -echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6 -if test $ac_cv_lib_crypt_crypt = yes; then - LIBCRYPT="-lcrypt"; kde_have_crypt=yes -else - echo "$as_me:$LINENO: checking for crypt in -lc" >&5 -echo $ECHO_N "checking for crypt in -lc... $ECHO_C" >&6 -if test "${ac_cv_lib_c_crypt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lc $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char crypt (); -int -main () -{ -crypt (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_c_crypt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_c_crypt=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_c_crypt" >&5 -echo "${ECHO_T}$ac_cv_lib_c_crypt" >&6 -if test $ac_cv_lib_c_crypt = yes; then - kde_have_crypt=yes -else - - { echo "$as_me:$LINENO: WARNING: you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support" >&5 -echo "$as_me: WARNING: you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support" >&2;} - kde_have_crypt=no - -fi - -fi - - - if test $kde_have_crypt = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_CRYPT 1 -_ACEOF - - fi - - echo "$as_me:$LINENO: checking for socklen_t" >&5 -echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6 - if test "${ac_cv_socklen_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include - -int -main () -{ - -socklen_t a=0; -getsockname(0,(struct sockaddr*)0, &a); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_socklen_t=socklen_t -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include - -int -main () -{ - -int a=0; -getsockname(0,(struct sockaddr*)0, &a); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_socklen_t=int -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_socklen_t=size_t - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - - - echo "$as_me:$LINENO: result: $ac_cv_socklen_t" >&5 -echo "${ECHO_T}$ac_cv_socklen_t" >&6 - if test "$ac_cv_socklen_t" != "socklen_t"; then - -cat >>confdefs.h <<_ACEOF -#define socklen_t $ac_cv_socklen_t -_ACEOF - - fi - -cat >>confdefs.h <<_ACEOF -#define ksize_t socklen_t -_ACEOF - - - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6 -if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dnet_ntoa (); -int -main () -{ -dnet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dnet_dnet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dnet_dnet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6 -if test $ac_cv_lib_dnet_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" -fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5 -echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6 -if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldnet_stub $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dnet_ntoa (); -int -main () -{ -dnet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dnet_stub_dnet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dnet_stub_dnet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6 -if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" -fi - - fi - echo "$as_me:$LINENO: checking for inet_ntoa" >&5 -echo $ECHO_N "checking for inet_ntoa... $ECHO_C" >&6 -if test "${ac_cv_func_inet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define inet_ntoa to an innocuous variant, in case declares inet_ntoa. - For example, HP-UX 11i declares gettimeofday. */ -#define inet_ntoa innocuous_inet_ntoa - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char inet_ntoa (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef inet_ntoa - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char inet_ntoa (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_inet_ntoa) || defined (__stub___inet_ntoa) -choke me -#else -char (*f) () = inet_ntoa; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != inet_ntoa; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_inet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_inet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_inet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_func_inet_ntoa" >&6 - - if test $ac_cv_func_inet_ntoa = no; then - echo "$as_me:$LINENO: checking for inet_ntoa in -lnsl" >&5 -echo $ECHO_N "checking for inet_ntoa in -lnsl... $ECHO_C" >&6 -if test "${ac_cv_lib_nsl_inet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char inet_ntoa (); -int -main () -{ -inet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_nsl_inet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_nsl_inet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_inet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_inet_ntoa" >&6 -if test $ac_cv_lib_nsl_inet_ntoa = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" -fi - - fi - echo "$as_me:$LINENO: checking for connect" >&5 -echo $ECHO_N "checking for connect... $ECHO_C" >&6 -if test "${ac_cv_func_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define connect to an innocuous variant, in case declares connect. - For example, HP-UX 11i declares gettimeofday. */ -#define connect innocuous_connect - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char connect (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef connect - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) -choke me -#else -char (*f) () = connect; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != connect; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 -echo "${ECHO_T}$ac_cv_func_connect" >&6 - - if test $ac_cv_func_connect = no; then - echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 -echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 -if test "${ac_cv_lib_socket_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $X_EXTRA_LIBS $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -int -main () -{ -connect (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_socket_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_socket_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 -if test $ac_cv_lib_socket_connect = yes; then - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" -fi - - fi - - echo "$as_me:$LINENO: checking for remove" >&5 -echo $ECHO_N "checking for remove... $ECHO_C" >&6 -if test "${ac_cv_func_remove+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define remove to an innocuous variant, in case declares remove. - For example, HP-UX 11i declares gettimeofday. */ -#define remove innocuous_remove - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char remove (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef remove - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_remove) || defined (__stub___remove) -choke me -#else -char (*f) () = remove; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != remove; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_remove=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_remove=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5 -echo "${ECHO_T}$ac_cv_func_remove" >&6 - - if test $ac_cv_func_remove = no; then - echo "$as_me:$LINENO: checking for remove in -lposix" >&5 -echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6 -if test "${ac_cv_lib_posix_remove+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lposix $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove (); -int -main () -{ -remove (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_posix_remove=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_posix_remove=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5 -echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6 -if test $ac_cv_lib_posix_remove = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" -fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - echo "$as_me:$LINENO: checking for shmat" >&5 -echo $ECHO_N "checking for shmat... $ECHO_C" >&6 -if test "${ac_cv_func_shmat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shmat to an innocuous variant, in case declares shmat. - For example, HP-UX 11i declares gettimeofday. */ -#define shmat innocuous_shmat - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shmat (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shmat - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shmat) || defined (__stub___shmat) -choke me -#else -char (*f) () = shmat; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != shmat; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_shmat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_shmat=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5 -echo "${ECHO_T}$ac_cv_func_shmat" >&6 -if test $ac_cv_func_shmat = yes; then - : -else - echo "$as_me:$LINENO: checking for shmat in -lipc" >&5 -echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6 -if test "${ac_cv_lib_ipc_shmat+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lipc $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat (); -int -main () -{ -shmat (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ipc_shmat=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ipc_shmat=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5 -echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6 -if test $ac_cv_lib_ipc_shmat = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" -fi - -fi - - - # darwin needs this to initialize the environment - -for ac_header in crt_externs.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - echo "$as_me:$LINENO: checking for _NSGetEnviron" >&5 -echo $ECHO_N "checking for _NSGetEnviron... $ECHO_C" >&6 -if test "${ac_cv_func__NSGetEnviron+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define _NSGetEnviron to an innocuous variant, in case declares _NSGetEnviron. - For example, HP-UX 11i declares gettimeofday. */ -#define _NSGetEnviron innocuous__NSGetEnviron - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char _NSGetEnviron (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef _NSGetEnviron - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char _NSGetEnviron (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub__NSGetEnviron) || defined (__stub____NSGetEnviron) -choke me -#else -char (*f) () = _NSGetEnviron; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != _NSGetEnviron; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func__NSGetEnviron=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func__NSGetEnviron=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func__NSGetEnviron" >&5 -echo "${ECHO_T}$ac_cv_func__NSGetEnviron" >&6 -if test $ac_cv_func__NSGetEnviron = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_NSGETENVIRON 1 -_ACEOF - -fi - - - # more headers that need to be explicitly included on darwin - - -for ac_header in sys/types.h stdint.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - # darwin requires a poll emulation library - echo "$as_me:$LINENO: checking for poll in -lpoll" >&5 -echo $ECHO_N "checking for poll in -lpoll... $ECHO_C" >&6 -if test "${ac_cv_lib_poll_poll+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpoll $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char poll (); -int -main () -{ -poll (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_poll_poll=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_poll_poll=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_poll_poll" >&5 -echo "${ECHO_T}$ac_cv_lib_poll_poll" >&6 -if test $ac_cv_lib_poll_poll = yes; then - LIB_POLL="-lpoll" -fi - - - # CoreAudio framework - if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then - echo "$as_me:$LINENO: checking for CoreAudio/CoreAudio.h" >&5 -echo $ECHO_N "checking for CoreAudio/CoreAudio.h... $ECHO_C" >&6 -if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_CoreAudio_CoreAudio_h" >&5 -echo "${ECHO_T}$ac_cv_header_CoreAudio_CoreAudio_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking CoreAudio/CoreAudio.h usability" >&5 -echo $ECHO_N "checking CoreAudio/CoreAudio.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking CoreAudio/CoreAudio.h presence" >&5 -echo $ECHO_N "checking CoreAudio/CoreAudio.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: CoreAudio/CoreAudio.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: CoreAudio/CoreAudio.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for CoreAudio/CoreAudio.h" >&5 -echo $ECHO_N "checking for CoreAudio/CoreAudio.h... $ECHO_C" >&6 -if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_CoreAudio_CoreAudio_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_CoreAudio_CoreAudio_h" >&5 -echo "${ECHO_T}$ac_cv_header_CoreAudio_CoreAudio_h" >&6 - -fi -if test $ac_cv_header_CoreAudio_CoreAudio_h = yes; then - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_COREAUDIO 1 -_ACEOF - - FRAMEWORK_COREAUDIO="-framework CoreAudio" - -fi - - - - - echo "$as_me:$LINENO: checking if res_init needs -lresolv" >&5 -echo $ECHO_N "checking if res_init needs -lresolv... $ECHO_C" >&6 - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include -#include -#include - -int -main () -{ - - res_init(); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - LIBRESOLV="-lresolv" - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -cat >>confdefs.h <<\_ACEOF -#define HAVE_RES_INIT 1 -_ACEOF - - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LIBS=$kde_libs_safe - - - echo "$as_me:$LINENO: checking if res_init is available" >&5 -echo $ECHO_N "checking if res_init is available... $ECHO_C" >&6 - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include -#include -#include - -int -main () -{ - - res_init(); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -cat >>confdefs.h <<\_ACEOF -#define HAVE_RES_INIT 1 -_ACEOF - - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - - - - LIBSOCKET="$X_EXTRA_LIBS" - - - echo "$as_me:$LINENO: checking for killpg in -lucb" >&5 -echo $ECHO_N "checking for killpg in -lucb... $ECHO_C" >&6 -if test "${ac_cv_lib_ucb_killpg+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lucb $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char killpg (); -int -main () -{ -killpg (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ucb_killpg=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ucb_killpg=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ucb_killpg" >&5 -echo "${ECHO_T}$ac_cv_lib_ucb_killpg" >&6 -if test $ac_cv_lib_ucb_killpg = yes; then - LIBUCB="-lucb" -fi - - - case $host in *-*-lynxos* ) - echo "$as_me:$LINENO: checking LynxOS header file wrappers" >&5 -echo $ECHO_N "checking LynxOS header file wrappers... $ECHO_C" >&6 - CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__" - echo "$as_me:$LINENO: result: disabled" >&5 -echo "${ECHO_T}disabled" >&6 - echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5 -echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6 -if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbsd $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -int -main () -{ -gethostbyname (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_bsd_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_bsd_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6 -if test $ac_cv_lib_bsd_gethostbyname = yes; then - LIBSOCKET="-lbsd" -fi - ;; - esac - - echo "$as_me:$LINENO: checking for int" >&5 -echo $ECHO_N "checking for int... $ECHO_C" >&6 -if test "${ac_cv_type_int+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((int *) 0) - return 0; -if (sizeof (int)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_int=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_int=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 -echo "${ECHO_T}$ac_cv_type_int" >&6 - -echo "$as_me:$LINENO: checking size of int" >&5 -echo $ECHO_N "checking size of int... $ECHO_C" >&6 -if test "${ac_cv_sizeof_int+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$ac_cv_type_int" = yes; then - # The cast to unsigned long works around a bug in the HP C Compiler - # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects - # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. - # This bug is HP SR number 8606223364. - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo= ac_hi= -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr '(' $ac_mid ')' + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_int=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (int), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } ;; -esac -else - if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -long longval () { return (long) (sizeof (int)); } -unsigned long ulongval () { return (long) (sizeof (int)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - exit (1); - if (((long) (sizeof (int))) < 0) - { - long i = longval (); - if (i != ((long) (sizeof (int)))) - exit (1); - fprintf (f, "%ld\n", i); - } - else - { - unsigned long i = ulongval (); - if (i != ((long) (sizeof (int)))) - exit (1); - fprintf (f, "%lu\n", i); - } - exit (ferror (f) || fclose (f) != 0); - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_int=`cat conftest.val` -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (int), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -rm -f conftest.val -else - ac_cv_sizeof_int=0 -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5 -echo "${ECHO_T}$ac_cv_sizeof_int" >&6 -cat >>confdefs.h <<_ACEOF -#define SIZEOF_INT $ac_cv_sizeof_int -_ACEOF - - echo "$as_me:$LINENO: checking for long" >&5 -echo $ECHO_N "checking for long... $ECHO_C" >&6 -if test "${ac_cv_type_long+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((long *) 0) - return 0; -if (sizeof (long)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_long=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_long=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 -echo "${ECHO_T}$ac_cv_type_long" >&6 - -echo "$as_me:$LINENO: checking size of long" >&5 -echo $ECHO_N "checking size of long... $ECHO_C" >&6 -if test "${ac_cv_sizeof_long+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$ac_cv_type_long" = yes; then - # The cast to unsigned long works around a bug in the HP C Compiler - # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects - # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. - # This bug is HP SR number 8606223364. - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo= ac_hi= -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr '(' $ac_mid ')' + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_long=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (long), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } ;; -esac -else - if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -long longval () { return (long) (sizeof (long)); } -unsigned long ulongval () { return (long) (sizeof (long)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - exit (1); - if (((long) (sizeof (long))) < 0) - { - long i = longval (); - if (i != ((long) (sizeof (long)))) - exit (1); - fprintf (f, "%ld\n", i); - } - else - { - unsigned long i = ulongval (); - if (i != ((long) (sizeof (long)))) - exit (1); - fprintf (f, "%lu\n", i); - } - exit (ferror (f) || fclose (f) != 0); - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_long=`cat conftest.val` -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (long), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -rm -f conftest.val -else - ac_cv_sizeof_long=0 -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5 -echo "${ECHO_T}$ac_cv_sizeof_long" >&6 -cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG $ac_cv_sizeof_long -_ACEOF - - echo "$as_me:$LINENO: checking for char *" >&5 -echo $ECHO_N "checking for char *... $ECHO_C" >&6 -if test "${ac_cv_type_char_p+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((char * *) 0) - return 0; -if (sizeof (char *)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_char_p=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_char_p=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_char_p" >&5 -echo "${ECHO_T}$ac_cv_type_char_p" >&6 - -echo "$as_me:$LINENO: checking size of char *" >&5 -echo $ECHO_N "checking size of char *... $ECHO_C" >&6 -if test "${ac_cv_sizeof_char_p+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$ac_cv_type_char_p" = yes; then - # The cast to unsigned long works around a bug in the HP C Compiler - # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects - # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. - # This bug is HP SR number 8606223364. - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (char *))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (char *))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (char *))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (char *))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo= ac_hi= -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (char *))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr '(' $ac_mid ')' + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_char_p=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char *), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (char *), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } ;; -esac -else - if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -long longval () { return (long) (sizeof (char *)); } -unsigned long ulongval () { return (long) (sizeof (char *)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - exit (1); - if (((long) (sizeof (char *))) < 0) - { - long i = longval (); - if (i != ((long) (sizeof (char *)))) - exit (1); - fprintf (f, "%ld\n", i); - } - else - { - unsigned long i = ulongval (); - if (i != ((long) (sizeof (char *)))) - exit (1); - fprintf (f, "%lu\n", i); - } - exit (ferror (f) || fclose (f) != 0); - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_char_p=`cat conftest.val` -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char *), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (char *), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -rm -f conftest.val -else - ac_cv_sizeof_char_p=0 -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_sizeof_char_p" >&5 -echo "${ECHO_T}$ac_cv_sizeof_char_p" >&6 -cat >>confdefs.h <<_ACEOF -#define SIZEOF_CHAR_P $ac_cv_sizeof_char_p -_ACEOF - - - -echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - -LIBDL="-ldl" -ac_cv_have_dlfcn=yes - -fi - - -echo "$as_me:$LINENO: checking for shl_unload in -ldld" >&5 -echo $ECHO_N "checking for shl_unload in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_unload+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_unload (); -int -main () -{ -shl_unload (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_unload=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_unload=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_unload" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_unload" >&6 -if test $ac_cv_lib_dld_shl_unload = yes; then - -LIBDL="-ldld" -ac_cv_have_shload=yes - -fi - - - - - - - - echo "$as_me:$LINENO: checking for size_t" >&5 -echo $ECHO_N "checking for size_t... $ECHO_C" >&6 -if test "${ac_cv_type_size_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((size_t *) 0) - return 0; -if (sizeof (size_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_size_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_size_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -echo "${ECHO_T}$ac_cv_type_size_t" >&6 - -echo "$as_me:$LINENO: checking size of size_t" >&5 -echo $ECHO_N "checking size of size_t... $ECHO_C" >&6 -if test "${ac_cv_sizeof_size_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$ac_cv_type_size_t" = yes; then - # The cast to unsigned long works around a bug in the HP C Compiler - # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects - # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. - # This bug is HP SR number 8606223364. - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (size_t))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (size_t))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (size_t))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (size_t))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo= ac_hi= -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (size_t))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr '(' $ac_mid ')' + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_size_t=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (size_t), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } ;; -esac -else - if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -long longval () { return (long) (sizeof (size_t)); } -unsigned long ulongval () { return (long) (sizeof (size_t)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - exit (1); - if (((long) (sizeof (size_t))) < 0) - { - long i = longval (); - if (i != ((long) (sizeof (size_t)))) - exit (1); - fprintf (f, "%ld\n", i); - } - else - { - unsigned long i = ulongval (); - if (i != ((long) (sizeof (size_t)))) - exit (1); - fprintf (f, "%lu\n", i); - } - exit (ferror (f) || fclose (f) != 0); - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_size_t=`cat conftest.val` -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (size_t), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -rm -f conftest.val -else - ac_cv_sizeof_size_t=0 -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_sizeof_size_t" >&5 -echo "${ECHO_T}$ac_cv_sizeof_size_t" >&6 -cat >>confdefs.h <<_ACEOF -#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t -_ACEOF - - - echo "$as_me:$LINENO: checking for unsigned long" >&5 -echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6 -if test "${ac_cv_type_unsigned_long+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((unsigned long *) 0) - return 0; -if (sizeof (unsigned long)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_unsigned_long=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_unsigned_long=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long" >&5 -echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6 - -echo "$as_me:$LINENO: checking size of unsigned long" >&5 -echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6 -if test "${ac_cv_sizeof_unsigned_long+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$ac_cv_type_unsigned_long" = yes; then - # The cast to unsigned long works around a bug in the HP C Compiler - # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects - # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. - # This bug is HP SR number 8606223364. - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=0 ac_mid=0 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr $ac_mid + 1` - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=-1 ac_mid=-1 - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_lo=$ac_mid; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_hi=`expr '(' $ac_mid ')' - 1` - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - ac_mid=`expr 2 '*' $ac_mid` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo= ac_hi= -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((long) (sizeof (unsigned long))) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_hi=$ac_mid -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_lo=`expr '(' $ac_mid ')' + 1` -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in -?*) ac_cv_sizeof_unsigned_long=$ac_lo;; -'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (unsigned long), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } ;; -esac -else - if test "$cross_compiling" = yes; then - { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run test program while cross compiling -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -long longval () { return (long) (sizeof (unsigned long)); } -unsigned long ulongval () { return (long) (sizeof (unsigned long)); } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - exit (1); - if (((long) (sizeof (unsigned long))) < 0) - { - long i = longval (); - if (i != ((long) (sizeof (unsigned long)))) - exit (1); - fprintf (f, "%ld\n", i); - } - else - { - unsigned long i = ulongval (); - if (i != ((long) (sizeof (unsigned long)))) - exit (1); - fprintf (f, "%lu\n", i); - } - exit (ferror (f) || fclose (f) != 0); - - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_sizeof_unsigned_long=`cat conftest.val` -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned long), 77 -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute sizeof (unsigned long), 77 -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -rm -f conftest.val -else - ac_cv_sizeof_unsigned_long=0 -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_sizeof_unsigned_long" >&5 -echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6 -cat >>confdefs.h <<_ACEOF -#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long -_ACEOF - - - - echo "$as_me:$LINENO: checking sizeof size_t == sizeof unsigned long" >&5 -echo $ECHO_N "checking sizeof size_t == sizeof unsigned long... $ECHO_C" >&6 - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - { { echo "$as_me:$LINENO: error: - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - " >&5 -echo "$as_me: error: - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - " >&2;} - { (exit 1); exit 1; }; } - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - - - - - - - -for ac_func in vsnprintf snprintf -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - - - - - - - - -# Check whether --enable-embedded or --disable-embedded was given. -if test "${enable_embedded+set}" = set; then - enableval="$enable_embedded" - kde_use_qt_emb=$enableval -else - kde_use_qt_emb=no - -fi; - -# Check whether --enable-qtopia or --disable-qtopia was given. -if test "${enable_qtopia+set}" = set; then - enableval="$enable_qtopia" - kde_use_qt_emb_palm=$enableval -else - kde_use_qt_emb_palm=no - -fi; - -if test "$kde_use_qt_emb" = "no"; then - -echo "$as_me:$LINENO: checking for X" >&5 -echo $ECHO_N "checking for X... $ECHO_C" >&6 - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -if test "${kde_cv_have_x+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - - - - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$x_direct_test_include> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # We can compile using X headers with no special include directory. -ac_x_includes= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done -fi -rm -f conftest.err conftest.$ac_ext -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -${x_direct_test_function}() - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries= -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${tdelibsuff}/` \ - /usr/X11/lib${tdelibsuff} \ - /usr/X11R6/lib${tdelibsuff} \ - /usr/X11R5/lib${tdelibsuff} \ - /usr/X11R4/lib${tdelibsuff} \ - \ - /usr/lib${tdelibsuff}/X11 \ - /usr/lib${tdelibsuff}/X11R6 \ - /usr/lib${tdelibsuff}/X11R5 \ - /usr/lib${tdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${tdelibsuff} \ - /usr/local/X11R6/lib${tdelibsuff} \ - /usr/local/X11R5/lib${tdelibsuff} \ - /usr/local/X11R4/lib${tdelibsuff} \ - \ - /usr/local/lib${tdelibsuff}/X11 \ - /usr/local/lib${tdelibsuff}/X11R6 \ - /usr/local/lib${tdelibsuff}/X11R5 \ - /usr/local/lib${tdelibsuff}/X11R4 \ - \ - /usr/X386/lib${tdelibsuff} \ - /usr/x386/lib${tdelibsuff} \ - /usr/XFree86/lib${tdelibsuff}/X11 \ - \ - /usr/lib${tdelibsuff} \ - /usr/local/lib${tdelibsuff} \ - /usr/unsupported/lib${tdelibsuff} \ - /usr/athena/lib${tdelibsuff} \ - /usr/local/x11r5/lib${tdelibsuff} \ - /usr/lpp/Xamples/lib${tdelibsuff} \ - /lib/usr/lib${tdelibsuff}/X11 \ - \ - /usr/openwin/lib${tdelibsuff} \ - /usr/openwin/share/lib${tdelibsuff} \ - ; \ -do - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi # $ac_x_libraries = NO - -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - rm -fr conftest.dir -if mkdir conftest.dir; then - cd conftest.dir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. - cat >Imakefile <<'_ACEOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -_ACEOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case $ac_im_incroot in - /usr/include) ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;; - esac - case $ac_im_usrlibdir in - /usr/lib | /lib) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;; - esac - fi - cd .. - rm -fr conftest.dir -fi - - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${tdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - { { echo "$as_me:$LINENO: error: Can't find X includes. Please check your installation and add the correct paths!" >&5 -echo "$as_me: error: Can't find X includes. Please check your installation and add the correct paths!" >&2;} - { (exit 1); exit 1; }; } -fi - -if test "$kde_x_libraries" = NO; then - { { echo "$as_me:$LINENO: error: Can't find X libraries. Please check your installation and add the correct paths!" >&5 -echo "$as_me: error: Can't find X libraries. Please check your installation and add the correct paths!" >&2;} - { (exit 1); exit 1; }; } -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" - -fi - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - echo "$as_me:$LINENO: result: $have_x" >&5 -echo "${ECHO_T}$have_x" >&6 - no_x=yes -else - echo "$as_me:$LINENO: result: libraries $kde_x_libraries, headers $kde_x_includes" >&5 -echo "${ECHO_T}libraries $kde_x_libraries, headers $kde_x_includes" >&6 -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then - X_LDFLAGS="" - x_libraries="/usr/lib"; else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS" - - - - - - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5 -echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6 -if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lICE $X_EXTRA_LIBS $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char IceConnectionNumber (); -int -main () -{ -IceConnectionNumber (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ICE_IceConnectionNumber=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ICE_IceConnectionNumber=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5 -echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6 -if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then - LIBSM="-lSM -lICE" -fi - - -LDFLAGS="$ac_save_LDFLAGS" - - - -LIB_X11='-lX11 $(LIBSOCKET)' - - -echo "$as_me:$LINENO: checking for libXext" >&5 -echo $ECHO_N "checking for libXext... $ECHO_C" >&6 -if test "${kde_cv_have_libXext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#ifdef STDC_HEADERS -# include -#endif - -int -main () -{ - -printf("hello Xext\n"); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - kde_cv_have_libXext=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -kde_cv_have_libXext=no - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe - -fi - - -echo "$as_me:$LINENO: result: $kde_cv_have_libXext" >&5 -echo "${ECHO_T}$kde_cv_have_libXext" >&6 - -if test "$kde_cv_have_libXext" = "no"; then - { { echo "$as_me:$LINENO: error: We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either." >&5 -echo "$as_me: error: We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either." >&2;} - { (exit 1); exit 1; }; } -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -else - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" - - - - - - - -fi - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - -echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5 -echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6 -if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_create (); -int -main () -{ -pthread_create (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_pthread_pthread_create=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthread_pthread_create=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5 -echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6 -if test $ac_cv_lib_pthread_pthread_create = yes; then - LIBPTHREAD="-lpthread" -fi - - - - - # Check whether --enable-kernel-threads or --disable-kernel-threads was given. -if test "${enable_kernel_threads+set}" = set; then - enableval="$enable_kernel_threads" - kde_use_kernthreads=$enableval -else - kde_use_kernthreads=no -fi; - - if test "$kde_use_kernthreads" = "yes"; then - ac_save_CXXFLAGS="$CXXFLAGS" - ac_save_CFLAGS="$CFLAGS" - CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS" - CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS" - -for ac_header in pthread/linuxthreads/pthread.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------------ ## -## Report this to the AC_PACKAGE_NAME lists. ## -## ------------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - CXXFLAGS="$ac_save_CXXFLAGS" - CFLAGS="$ac_save_CFLAGS" - if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then - kde_use_kernthreads=no - else - echo "$as_me:$LINENO: checking for pthread_join in -llthread" >&5 -echo $ECHO_N "checking for pthread_join in -llthread... $ECHO_C" >&6 -if test "${ac_cv_lib_lthread_pthread_join+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-llthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_join (); -int -main () -{ -pthread_join (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_lthread_pthread_join=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_lthread_pthread_join=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_lthread_pthread_join" >&5 -echo "${ECHO_T}$ac_cv_lib_lthread_pthread_join" >&6 -if test $ac_cv_lib_lthread_pthread_join = yes; then - LIBPTHREAD="-llthread -llgcc_r" -fi - if test "x$LIBPTHREAD" = "x"; then - kde_use_kernthreads=no - else - USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads" - fi - fi - else - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - -echo "$as_me:$LINENO: checking whether $CXX supports -pthread" >&5 -echo $ECHO_N "checking whether $CXX supports -pthread... $ECHO_C" >&6 -kde_cache=`echo pthread | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -pthread" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - USE_THREADS="-pthread" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - fi - fi - - - - case $host_os in - solaris*) - -echo "$as_me:$LINENO: checking whether $CXX supports -mt" >&5 -echo $ECHO_N "checking whether $CXX supports -mt... $ECHO_C" >&6 -kde_cache=`echo mt | sed 'y% .=/+-,%____p__%'` -if eval "test \"\${kde_cv_prog_cxx_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -mt" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_prog_cxx_$kde_cache=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CXXFLAGS="$save_CXXFLAGS" - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - USE_THREADS="-mt" -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - -fi - - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - - - - -echo "$as_me:$LINENO: checking for extra includes" >&5 -echo $ECHO_N "checking for extra includes... $ECHO_C" >&6 - -# Check whether --with-extra-includes or --without-extra-includes was given. -if test "${with_extra_includes+set}" = set; then - withval="$with_extra_includes" - kde_use_extra_includes="$withval" -else - kde_use_extra_includes=NONE - -fi; -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi - - -echo "$as_me:$LINENO: result: $kde_use_extra_includes" >&5 -echo "${ECHO_T}$kde_use_extra_includes" >&6 - -kde_extra_libs= -echo "$as_me:$LINENO: checking for extra libs" >&5 -echo $ECHO_N "checking for extra libs... $ECHO_C" >&6 - -# Check whether --with-extra-libs or --without-extra-libs was given. -if test "${with_extra_libs+set}" = set; then - withval="$with_extra_libs" - kde_use_extra_libs=$withval -else - kde_use_extra_libs=NONE - -fi; -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - - - -echo "$as_me:$LINENO: result: $kde_use_extra_libs" >&5 -echo "${ECHO_T}$kde_use_extra_libs" >&6 - - - - -echo "$as_me:$LINENO: checking for libz" >&5 -echo $ECHO_N "checking for libz... $ECHO_C" >&6 -if test "${ac_cv_lib_z+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include - -int -main () -{ - - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "ac_cv_lib_z='-lz'" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "ac_cv_lib_z=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" - -fi -if test ! "$ac_cv_lib_z" = no; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_LIBZ 1 -_ACEOF - - LIBZ="$ac_cv_lib_z" - echo "$as_me:$LINENO: result: $ac_cv_lib_z" >&5 -echo "${ECHO_T}$ac_cv_lib_z" >&6 -else - { { echo "$as_me:$LINENO: error: not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log" >&5 -echo "$as_me: error: not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log" >&2;} - { (exit 1); exit 1; }; } - LIBZ="" -fi - - - - - -echo "$as_me:$LINENO: checking for libpng" >&5 -echo $ECHO_N "checking for libpng... $ECHO_C" >&6 -if test "${ac_cv_lib_png+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - #include - -int -main () -{ - - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "ac_cv_lib_png='-lpng $LIBZ -lm'" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "ac_cv_lib_png=no" - -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" - -fi -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_LIBPNG 1 -_ACEOF - - LIBPNG="$ac_cv_lib_png" - - echo "$as_me:$LINENO: result: $ac_cv_lib_png" >&5 -echo "${ECHO_T}$ac_cv_lib_png" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - LIBPNG="" - -fi - - - -echo "$as_me:$LINENO: checking for libjpeg6b" >&5 -echo $ECHO_N "checking for libjpeg6b... $ECHO_C" >&6 -if test "${ac_cv_lib_jpeg_6b+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ -struct jpeg_decompress_struct; -typedef struct jpeg_decompress_struct * j_decompress_ptr; -typedef int size_t; -#ifdef __cplusplus -extern "C" { -#endif - void jpeg_CreateDecompress(j_decompress_ptr cinfo, - int version, size_t structsize); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ - -int -main () -{ -jpeg_CreateDecompress(0L, 0, 0); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "ac_cv_lib_jpeg_6b=-ljpeg6b" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "ac_cv_lib_jpeg_6b=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" - -fi - - -if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_6b" - echo "$as_me:$LINENO: result: $ac_cv_lib_jpeg_6b" >&5 -echo "${ECHO_T}$ac_cv_lib_jpeg_6b" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -echo "$as_me:$LINENO: checking for libjpeg" >&5 -echo $ECHO_N "checking for libjpeg... $ECHO_C" >&6 -if test "${ac_cv_lib_jpeg_normal+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Override any gcc2 internal prototype to avoid an error. */ -struct jpeg_decompress_struct; -typedef struct jpeg_decompress_struct * j_decompress_ptr; -typedef int size_t; -#ifdef __cplusplus -extern "C" { -#endif - void jpeg_CreateDecompress(j_decompress_ptr cinfo, - int version, size_t structsize); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ - -int -main () -{ -jpeg_CreateDecompress(0L, 0, 0); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "ac_cv_lib_jpeg_normal=-ljpeg" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "ac_cv_lib_jpeg_normal=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" - -fi - - -if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_normal" - echo "$as_me:$LINENO: result: $ac_cv_lib_jpeg_normal" >&5 -echo "${ECHO_T}$ac_cv_lib_jpeg_normal" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - - LIBJPEG= - - -fi - - - -fi - - - -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" - -jpeg_incdir=NO -for i in $jpeg_incdirs; -do - for j in jpeglib.h; - do - echo "configure: 24202: $i/$j" >&5 - if test -r "$i/$j"; then - echo "taking that" >&5 - jpeg_incdir=$i - break 2 - fi - done -done - -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_LIBJPEG 1 -_ACEOF - -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - { echo "$as_me:$LINENO: WARNING: -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -" >&5 -echo "$as_me: WARNING: -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -" >&2;} - else - { echo "$as_me:$LINENO: WARNING: libjpeg not found. disable JPEG support." >&5 -echo "$as_me: WARNING: libjpeg not found. disable JPEG support." >&2;} - fi - jpeg_incdir= - LIBJPEG= -fi - - - - - - - - - - - - -# Check whether --enable-mt or --disable-mt was given. -if test "${enable_mt+set}" = set; then - enableval="$enable_mt" - kde_use_qt_mt=$enableval -else - - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - - -fi; - -USING_QT_MT="" - - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - - - - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - # Check whether --enable-threading or --disable-threading was given. -if test "${enable_threading+set}" = set; then - enableval="$enable_threading" - kde_use_threading=$enableval -else - kde_use_threading=$kde_check_threading_default -fi; - if test "x$kde_use_threading" = "xyes"; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBPTHREAD 1 -_ACEOF - - fi - - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi - - - -kde_qt_was_given=yes - -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -if test -z "$LIBQT"; then - if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" - else - qtlib="qt" - fi - - kde_int_qt="-l$qtlib" -else - kde_int_qt="$LIBQT" - kde_lib_qt_set=yes -fi - -if test -z "$LIBQPE"; then - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - - -if test "x$kde_use_qt_mt" = "xyes"; then - if test -z "$LIBQT"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - else - LIBQT="$qtlib-mt" - kde_int_qt="$qtlib-mt" - fi - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - - - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - - LIBQT="$LIBQT $LIBDL" -fi - -echo "$as_me:$LINENO: checking for Qt" >&5 -echo $ECHO_N "checking for Qt... $ECHO_C" >&6 - -if test "x$kde_use_qt_emb" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" - -# Check whether --with-qt-dir or --without-qt-dir was given. -if test "${with_qt_dir+set}" = set; then - withval="$with_qt_dir" - ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${tdelibsuff} - ac_qt_bindir="$withval"/bin - -fi; - - -# Check whether --with-qt-includes or --without-qt-includes was given. -if test "${with_qt_includes+set}" = set; then - withval="$with_qt_includes" - - ac_qt_includes="$withval" - -fi; - -kde_qt_libs_given=no - - -# Check whether --with-qt-libraries or --without-qt-libraries was given. -if test "${with_qt_libraries+set}" = set; then - withval="$with_qt_libraries" - ac_qt_libraries="$withval" - kde_qt_libs_given=yes - -fi; - -if test "${ac_cv_have_qt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - #try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=ntqstyle.h -else - kde_qt_header=ntqglobal.h -fi - - -qt_incdir=NO -for i in $qt_incdirs; -do - for j in $kde_qt_header; - do - echo "configure: 24440: $i/$j" >&5 - if test -r "$i/$j"; then - echo "taking that" >&5 - qt_incdir=$i - break 2 - fi - done -done - -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${tdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi - done -fi - -ac_qt_libraries="$qt_libdir" - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - - - -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - { { echo "$as_me:$LINENO: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt" >&5 -echo "$as_me: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt" >&2;} - { (exit 1); exit 1; }; } -else - have_qt="yes" -fi - -fi - - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - echo "$as_me:$LINENO: result: $have_qt" >&5 -echo "${ECHO_T}$have_qt" >&6; -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - echo "$as_me:$LINENO: result: libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" >&5 -echo "${ECHO_T}libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" >&6 - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes"; then - - -echo "$as_me:$LINENO: checking if Qt compiles without flags" >&5 -echo $ECHO_N "checking if Qt compiles without flags... $ECHO_C" >&6 -if test "${kde_cv_qt_direct+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH -ac_LIBRARY_PATH="$LIBRARY_PATH" -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_includes" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -if test "x$kde_use_qt_emb" != "xyes"; then -LIBS="$LIBQT -lXext -lX11 $LIBSOCKET" -else -LIBS="$LIBQT $LIBSOCKET" -fi -LD_LIBRARY_PATH= -export LD_LIBRARY_PATH -LIBRARY_PATH= -export LIBRARY_PATH - - - -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - kde_cv_qt_direct="yes" -else - kde_cv_qt_direct="no" - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -fi - - -if test "$kde_cv_qt_direct" = "yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - qt_libraries= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - -fi - -fi - - - - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$all_libraries $QT_LDFLAGS" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - - - - - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - - echo "$as_me:$LINENO: checking for moc" >&5 -echo $ECHO_N "checking for moc... $ECHO_C" >&6 - if test -n "$MOC"; then - kde_cv_path="$MOC"; - else - kde_cache=`echo moc | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$qt_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/moc"; then - if test -n "" - then - evalstr="$dir/moc 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/moc" - break - fi - else - kde_cv_path="$dir/moc" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - { { echo "$as_me:$LINENO: error: No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -" >&5 -echo "$as_me: error: No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -" >&2;} - { (exit 1); exit 1; }; } - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - MOC=$kde_cv_path - - fi - - if test -z "$UIC_NOT_NEEDED"; then - - echo "$as_me:$LINENO: checking for uic" >&5 -echo $ECHO_N "checking for uic... $ECHO_C" >&6 - if test -n "$UIC_PATH"; then - kde_cv_path="$UIC_PATH"; - else - kde_cache=`echo uic | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$qt_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/uic"; then - if test -n "" - then - evalstr="$dir/uic 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/uic" - break - fi - else - kde_cv_path="$dir/uic" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - UIC_PATH="" - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - UIC_PATH=$kde_cv_path - - fi - - if test -z "$UIC_PATH" ; then - - { echo "$as_me:$LINENO: WARNING: No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -" >&5 -echo "$as_me: WARNING: No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -" >&2;} - - exit 1 - elif test $kde_qtver = 3; then - - echo "$as_me:$LINENO: checking whether uic supports -L " >&5 -echo $ECHO_N "checking whether uic supports -L ... $ECHO_C" >&6 - kde_cache=`echo L | sed 'y% .=/+-%____p_%'` - if eval "test \"\${kde_cv_prog_uic_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -L /nonexistant conftest.ui >/dev/null" - if { (eval echo "$as_me:$LINENO: \"$ac_uic_testrun\"") >&5 - (eval $ac_uic_testrun) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - -fi - - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - ac_uic_supports_libpath=yes - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - ac_uic_supports_libpath=no - fi - - - echo "$as_me:$LINENO: checking whether uic supports -nounload " >&5 -echo $ECHO_N "checking whether uic supports -nounload ... $ECHO_C" >&6 - kde_cache=`echo nounload | sed 'y% .=/+-%____p_%'` - if eval "test \"\${kde_cv_prog_uic_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -nounload conftest.ui >/dev/null" - if { (eval echo "$as_me:$LINENO: \"$ac_uic_testrun\"") >&5 - (eval $ac_uic_testrun) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - -fi - - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - : - ac_uic_supports_nounload=yes - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - : - ac_uic_supports_nounload=no - fi - - - UIC=$UIC_PATH - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - else - UIC="echo uic not available: " - fi - - - - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - - - - -if test -n "$LIBJPEG"; then -echo "$as_me:$LINENO: checking if Qt needs $LIBJPEG" >&5 -echo $ECHO_N "checking if Qt needs $LIBJPEG... $ECHO_C" >&6 -if test "${kde_cv_qt_jpeg+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ - - int argc; - char** argv; - QApplication app(argc, argv); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_cxx_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "kde_cv_qt_jpeg=no" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "kde_cv_qt_jpeg=yes" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi - -fi - - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - LIBJPEG_QT='$(LIBJPEG)' -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - LIBJPEG_QT= -fi - - - -if test "x$kde_use_qt_emb" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" - - - - - - - - - - - - - -echo "$as_me:$LINENO: checking for rpath" >&5 -echo $ECHO_N "checking for rpath... $ECHO_C" >&6 -# Check whether --enable-rpath or --disable-rpath was given. -if test "${enable_rpath+set}" = set; then - enableval="$enable_rpath" - USE_RPATH=$enableval -else - USE_RPATH=yes -fi; - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(kde_libraries)" - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi - - - -echo "$as_me:$LINENO: result: $USE_RPATH" >&5 -echo "${ECHO_T}$USE_RPATH" >&6 - -echo "$as_me:$LINENO: checking for KDE" >&5 -echo $ECHO_N "checking for KDE... $ECHO_C" >&6 - -if test "${prefix}" != NONE; then - kde_includes=${prefix}/include - ac_kde_includes=$prefix/include - - if test "${exec_prefix}" != NONE; then - kde_libraries=${libdir} - ac_kde_libraries=$libdir - if test "$ac_kde_libraries" = '${exec_prefix}/lib'${tdelibsuff}; then - ac_kde_libraries=$exec_prefix/lib${tdelibsuff} - fi - else - kde_libraries=${prefix}/lib${tdelibsuff} - ac_kde_libraries=$prefix/lib${tdelibsuff} - fi -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -if test "${ac_cv_have_kde+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - #try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libtdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libtdeio.la" -fi - -if test -z ""; then - -kde_incdirs="/usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/tde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$TDEDIR" && kde_incdirs="$TDEDIR/include $TDEDIR/include/tde $TDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" - -kde_incdir=NO -for i in $kde_incdirs; -do - for j in $kde_check_header; - do - echo "configure: 25246: $i/$j" >&5 - if test -r "$i/$j"; then - echo "taking that" >&5 - kde_incdir=$i - break 2 - fi - done -done - -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - { { echo "$as_me:$LINENO: error: -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!" >&5 -echo "$as_me: error: -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!" >&2;} - { (exit 1); exit 1; }; } -fi - -kde_libdirs="/usr/lib/kde/lib${tdelibsuff} /usr/local/kde/lib${tdelibsuff} /usr/kde/lib${tdelibsuff} /usr/lib${tdelibsuff}/kde /usr/lib${tdelibsuff}/kde3 /usr/lib${tdelibsuff} /usr/X11R6/lib${tdelibsuff} /usr/local/lib${tdelibsuff} /opt/kde3/lib${tdelibsuff} /opt/kde/lib${tdelibsuff} /usr/X11R6/kde/lib${tdelibsuff}" -test -n "$TDEDIR" && kde_libdirs="$TDEDIR/lib${tdelibsuff} $TDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" - -kde_libdir=NO -for i in $kde_libdirs; -do - for j in $kde_check_lib; - do - echo "configure: 25276: $i/$j" >&5 - if test -r "$i/$j"; then - echo "taking that" >&5 - kde_libdir=$i - break 2 - fi - done -done - -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO - -kde_widgetdir=NO -for i in $kde_libdirs; -do - for j in "kde3/plugins/designer/tdewidgets.la"; - do - echo "configure: 25294: $i/$j" >&5 - if test -r "$i/$j"; then - echo "taking that" >&5 - kde_widgetdir=$i - break 2 - fi - done -done - - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -{ { echo "$as_me:$LINENO: error: -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!" >&5 -echo "$as_me: error: -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!" >&2;} - { (exit 1); exit 1; }; } -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/tdewidgets.la"; then -{ { echo "$as_me:$LINENO: error: -I can't find the designer plugins. These are required and should have been installed -by tdelibs" >&5 -echo "$as_me: error: -I can't find the designer plugins. These are required and should have been installed -by tdelibs" >&2;} - { (exit 1); exit 1; }; } -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else - ac_cv_have_kde="have_kde=no" - -fi - -fi - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - echo "$as_me:$LINENO: result: will be installed in $ac_kde_prefix" >&5 -echo "${ECHO_T}will be installed in $ac_kde_prefix" >&6 - else - ac_kde_exec_prefix="$exec_prefix" - echo "$as_me:$LINENO: result: will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" >&5 -echo "${ECHO_T}will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" >&6 - fi - - kde_libraries="${libdir}" - kde_includes=${ac_kde_prefix}/include - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - echo "$as_me:$LINENO: result: libraries $ac_kde_libraries, headers $ac_kde_includes" >&5 -echo "${ECHO_T}libraries $ac_kde_libraries, headers $ac_kde_includes" >&6 - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi - - - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$all_libraries $KDE_LDFLAGS" -fi - - - - - - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" - - - -if test -z ""; then - - - -if test x$ac_uic_supports_libpath = xyes; then - -echo "$as_me:$LINENO: checking if UIC has KDE plugins available" >&5 -echo $ECHO_N "checking if UIC has KDE plugins available... $ECHO_C" >&6 -if test "${kde_cv_uic_plugins+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if { (eval echo "$as_me:$LINENO: \"$kde_line\"") >&5 - (eval $kde_line) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp - -fi - - -echo "$as_me:$LINENO: result: $kde_cv_uic_plugins" >&5 -echo "${ECHO_T}$kde_cv_uic_plugins" >&6 -if test "$kde_cv_uic_plugins" != yes; then - { { echo "$as_me:$LINENO: error: you need to install tdelibs first." >&5 -echo "$as_me: error: you need to install tdelibs first." >&2;} - { (exit 1); exit 1; }; } -fi -fi - -fi - -ac_kde_libraries="$kde_libdir" - - - - - - # Check whether --enable-path-check or --disable-path-check was given. -if test "${enable_path_check+set}" = set; then - enableval="$enable_path_check" - - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - -else - - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - - -fi; - - - - -echo "$as_me:$LINENO: checking for KDE paths" >&5 -echo $ECHO_N "checking for KDE paths... $ECHO_C" >&6 -kde_result="" -kde_cached_paths=yes -if test "${kde_cv_all_paths+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - -if test "$ac_use_path_checking" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${prefix}/share/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${prefix}/share/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${prefix}/share/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${prefix}/share/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${prefix}/share/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${prefix}/share/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${prefix}/share/config' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${prefix}/share/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${prefix}/share/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${prefix}/share/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${prefix}/share/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${prefix}/share/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${prefix}/share/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=defaults" - - -else - - if test $kde_qtver = 1; then - echo "$as_me:$LINENO: result: compiling" >&5 -echo "${ECHO_T}compiling" >&6 - - - echo "$as_me:$LINENO: checking for KDE headers installed" >&5 -echo $ECHO_N "checking for KDE headers installed... $ECHO_C" >&6 - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - { { echo "$as_me:$LINENO: error: your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log." >&5 -echo "$as_me: error: your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log." >&2;} - { (exit 1); exit 1; }; } - fi - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -echo "$as_me:$LINENO: checking for KDE libraries installed" >&5 -echo $ECHO_N "checking for KDE libraries installed... $ECHO_C" >&6 -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - { { echo "$as_me:$LINENO: error: your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log." >&5 -echo "$as_me: error: your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log." >&2;} - { (exit 1); exit 1; }; } -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - - - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$kde_result" - - - - else - { { echo "$as_me:$LINENO: error: path checking not yet supported for KDE 2" >&5 -echo "$as_me: error: path checking not yet supported for KDE 2" >&2;} - { (exit 1); exit 1; }; } - fi - -fi - - kde_cached_paths=no - -fi - -eval "$kde_cv_all_paths" - if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "xdg_directorydir" - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi - -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_directorydir= - -if test "$ac_use_path_checking" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${prefix}/share/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${prefix}/share/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${prefix}/share/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${prefix}/share/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${prefix}/share/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${prefix}/share/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${prefix}/share/config' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${prefix}/share/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${prefix}/share/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${prefix}/share/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${prefix}/share/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${prefix}/share/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${prefix}/share/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=defaults" - - -else - - if test $kde_qtver = 1; then - echo "$as_me:$LINENO: result: compiling" >&5 -echo "${ECHO_T}compiling" >&6 - - - echo "$as_me:$LINENO: checking for KDE headers installed" >&5 -echo $ECHO_N "checking for KDE headers installed... $ECHO_C" >&6 - - - ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' - - -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", TDEApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", TDEApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", TDEApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", TDEApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", TDEApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", TDEApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", TDEApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", TDEApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", TDEApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", TDEApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - TDEApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", TDEApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", TDEApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_compile='${CXX-g++} -c $CXXFLAGS $all_includes $CPPFLAGS conftest.$ac_ext' - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - { { echo "$as_me:$LINENO: error: your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log." >&5 -echo "$as_me: error: your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log." >&2;} - { (exit 1); exit 1; }; } - fi - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -echo "$as_me:$LINENO: checking for KDE libraries installed" >&5 -echo $ECHO_N "checking for KDE libraries installed... $ECHO_C" >&6 -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -ltdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -else - { { echo "$as_me:$LINENO: error: your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log." >&5 -echo "$as_me: error: your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and tdelibs as you did use now. -For more details about this problem, look at the end of config.log." >&2;} - { (exit 1); exit 1; }; } -fi - -if eval `TDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -TDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - - - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$kde_result" - - - - else - { { echo "$as_me:$LINENO: error: path checking not yet supported for KDE 2" >&5 -echo "$as_me: error: path checking not yet supported for KDE 2" >&2;} - { (exit 1); exit 1; }; } - fi - -fi - - eval "$kde_cv_all_paths" - if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "xdg_directorydir" - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi - - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - { { echo "$as_me:$LINENO: error: configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -" >&5 -echo "$as_me: error: configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -" >&2;} - { (exit 1); exit 1; }; } -else - rm -f conftest* - echo "$as_me:$LINENO: result: $kde_result" >&5 -echo "${ECHO_T}$kde_result" >&6 -fi - -bindir=$kde_bindir - - - -# Check whether --with-arts or --without-arts was given. -if test "${with_arts+set}" = set; then - withval="$with_arts" - build_arts=$withval -else - build_arts=yes - -fi; - - -if test "$build_arts" != "no"; then - include_ARTS_TRUE= - include_ARTS_FALSE='#' -else - include_ARTS_TRUE='#' - include_ARTS_FALSE= -fi - - - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$TDEDIR" && kde_default_bindirs="$TDEDIR/bin $kde_default_bindirs" - if test -n "$TDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $TDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_default_bindirs" - - echo "$as_me:$LINENO: checking for dcopidl" >&5 -echo $ECHO_N "checking for dcopidl... $ECHO_C" >&6 - if test -n "$DCOPIDL"; then - kde_cv_path="$DCOPIDL"; - else - kde_cache=`echo dcopidl | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/dcopidl"; then - if test -n "" - then - evalstr="$dir/dcopidl 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/dcopidl" - break - fi - else - kde_cv_path="$dir/dcopidl" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - { { echo "$as_me:$LINENO: error: The important program dcopidl was not found! -Please check whether you installed KDE correctly. -" >&5 -echo "$as_me: error: The important program dcopidl was not found! -Please check whether you installed KDE correctly. -" >&2;} - { (exit 1); exit 1; }; } - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - DCOPIDL=$kde_cv_path - - fi - - - echo "$as_me:$LINENO: checking for dcopidl2cpp" >&5 -echo $ECHO_N "checking for dcopidl2cpp... $ECHO_C" >&6 - if test -n "$DCOPIDL2CPP"; then - kde_cv_path="$DCOPIDL2CPP"; - else - kde_cache=`echo dcopidl2cpp | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/dcopidl2cpp"; then - if test -n "" - then - evalstr="$dir/dcopidl2cpp 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/dcopidl2cpp" - break - fi - else - kde_cv_path="$dir/dcopidl2cpp" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - { { echo "$as_me:$LINENO: error: The important program dcopidl2cpp was not found! -Please check whether you installed KDE correctly. -" >&5 -echo "$as_me: error: The important program dcopidl2cpp was not found! -Please check whether you installed KDE correctly. -" >&2;} - { (exit 1); exit 1; }; } - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - DCOPIDL2CPP=$kde_cv_path - - fi - - if test "$build_arts" != "no"; then - - echo "$as_me:$LINENO: checking for mcopidl" >&5 -echo $ECHO_N "checking for mcopidl... $ECHO_C" >&6 - if test -n "$MCOPIDL"; then - kde_cv_path="$MCOPIDL"; - else - kde_cache=`echo mcopidl | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/mcopidl"; then - if test -n "" - then - evalstr="$dir/mcopidl 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/mcopidl" - break - fi - else - kde_cv_path="$dir/mcopidl" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - { { echo "$as_me:$LINENO: error: The important program mcopidl was not found! -Please check whether you installed aRts correctly. -" >&5 -echo "$as_me: error: The important program mcopidl was not found! -Please check whether you installed aRts correctly. -" >&2;} - { (exit 1); exit 1; }; } - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - MCOPIDL=$kde_cv_path - - fi - - - echo "$as_me:$LINENO: checking for artsc-config" >&5 -echo $ECHO_N "checking for artsc-config... $ECHO_C" >&6 - if test -n "$ARTSCCONFIG"; then - kde_cv_path="$ARTSCCONFIG"; - else - kde_cache=`echo artsc-config | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/artsc-config"; then - if test -n "" - then - evalstr="$dir/artsc-config 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/artsc-config" - break - fi - else - kde_cv_path="$dir/artsc-config" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - { { echo "$as_me:$LINENO: error: The important program artsc-config was not found! -Please check whether you installed aRts correctly. -" >&5 -echo "$as_me: error: The important program artsc-config was not found! -Please check whether you installed aRts correctly. -" >&2;} - { (exit 1); exit 1; }; } - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - ARTSCCONFIG=$kde_cv_path - - fi - - fi - - echo "$as_me:$LINENO: checking for tde-config" >&5 -echo $ECHO_N "checking for tde-config... $ECHO_C" >&6 - if test -n "$KDECONFIG"; then - kde_cv_path="$KDECONFIG"; - else - kde_cache=`echo tde-config | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/tde-config"; then - if test -n "" - then - evalstr="$dir/tde-config 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/tde-config" - break - fi - else - kde_cv_path="$dir/tde-config" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - KDECONFIG=$kde_cv_path - - fi - - - echo "$as_me:$LINENO: checking for brockenboring" >&5 -echo $ECHO_N "checking for brockenboring... $ECHO_C" >&6 - if test -n "$BROCKENBORING"; then - kde_cv_path="$BROCKENBORING"; - else - kde_cache=`echo brockenboring | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/brockenboring"; then - if test -n "" - then - evalstr="$dir/brockenboring 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/brockenboring" - break - fi - else - kde_cv_path="$dir/brockenboring" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - BROCKENBORING=$kde_cv_path - - fi - - if test -n "$BROCKENBORING"; then - - echo "$as_me:$LINENO: checking for tdeinit_wrapper" >&5 -echo $ECHO_N "checking for tdeinit_wrapper... $ECHO_C" >&6 - if test -n "$BROCKENBORING"; then - kde_cv_path="$BROCKENBORING"; - else - kde_cache=`echo tdeinit_wrapper | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/tdeinit_wrapper"; then - if test -n "" - then - evalstr="$dir/tdeinit_wrapper 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/tdeinit_wrapper" - break - fi - else - kde_cv_path="$dir/tdeinit_wrapper" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - BROCKENBORING=$kde_cv_path - - fi - - fi - - echo "$as_me:$LINENO: checking for meinproc" >&5 -echo $ECHO_N "checking for meinproc... $ECHO_C" >&6 - if test -n "$MEINPROC"; then - kde_cv_path="$MEINPROC"; - else - kde_cache=`echo meinproc | sed 'y%./+-%__p_%'` - - if eval "test \"\${kde_cv_path_$kde_cache+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - kde_cv_path="NONE" - dirs="$kde_default_bindirs" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - dirs="$dirs $dir" - done - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/meinproc"; then - if test -n "" - then - evalstr="$dir/meinproc 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/meinproc" - break - fi - else - kde_cv_path="$dir/meinproc" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - -fi - - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - echo "$as_me:$LINENO: result: not found" >&5 -echo "${ECHO_T}not found" >&6 - - else - echo "$as_me:$LINENO: result: $kde_cv_path" >&5 -echo "${ECHO_T}$kde_cv_path" >&6 - MEINPROC=$kde_cv_path - - fi - - - if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$TDEDIR" && kde_sharedirs="$TDEDIR/share $kde_sharedirs" - -KDE_XSL_STYLESHEET=NO -for i in $kde_sharedirs; -do - for j in apps/ksgmltools2/customization/kde-chunk.xsl; - do - echo "configure: 26621: $i/$j" >&5 - if test -r "$i/$j"; then - echo "taking that" >&5 - KDE_XSL_STYLESHEET=$i - break 2 - fi - done -done - - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - - - - - - - - - - - if test -x "$KDECONFIG"; then # it can be "compiled" - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - { { echo "$as_me:$LINENO: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - " >&5 -echo "$as_me: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for tdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile tdelibs for the new prefix. - " >&2;} - { (exit 1); exit 1; }; } - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - else - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - fi - - - - - - - - - - - - - - - - - - - - - - - -tdeinitdir='$(kde_moduledir)' - - - -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi - - - - - - -if test $kde_qtver = 3; then - LIB_TDECORE="-ltdecore" - - LIB_TDEUI="-ltdeui" - - LIB_TDEIO="-ltdeio" - - LIB_SMB="-lsmb" - - LIB_KAB="-lkab" - - LIB_KABC="-ltdeabc" - - LIB_TDEHTML="-ltdehtml" - - LIB_TDESPELL="-ltdespell" - - LIB_TDEPARTS="-ltdeparts" - - LIB_TDEPRINT="-ltdeprint" - -# these are for backward compatibility - LIB_TDESYCOCA="-ltdeio" - - LIB_KFILE="-ltdeio" - -elif test $kde_qtver = 2; then - LIB_TDECORE="-ltdecore" - - LIB_TDEUI="-ltdeui" - - LIB_TDEIO="-ltdeio" - - LIB_TDESYCOCA="-ltdesycoca" - - LIB_SMB="-lsmb" - - LIB_KFILE="-ltdefile" - - LIB_KAB="-lkab" - - LIB_TDEHTML="-ltdehtml" - - LIB_TDESPELL="-ltdespell" - - LIB_TDEPARTS="-ltdeparts" - - LIB_TDEPRINT="-ltdeprint" - -else - LIB_TDECORE="-ltdecore -lXext $(LIB_QT)" - - LIB_TDEUI="-ltdeui $(LIB_TDECORE)" - - LIB_KFM="-lkfm $(LIB_TDECORE)" - - LIB_KFILE="-ltdefile $(LIB_KFM) $(LIB_TDEUI)" - - LIB_KAB="-lkab $(LIB_KIMGIO) $(LIB_TDECORE)" - -fi - - -#MIN_CONFIG(3) - - - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" - -if test ! -s $srcdir/subdirs; then - TOPSUBDIRS="" - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -else - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - echo "$as_me:$LINENO: checking if $i should be compiled" >&5 -echo $ECHO_N "checking if $i should be compiled... $ECHO_C" >&6 - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - echo "$as_me:$LINENO: result: $install_it" >&5 -echo "${ECHO_T}$install_it" >&6 - vari=`echo $i | sed -e 's,[-+.],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - - - - ac_config_files="$ac_config_files Makefile" - - ac_config_files="$ac_config_files colorscheme/Makefile" - - ac_config_files="$ac_config_files malloryclient/Makefile" - - ac_config_files="$ac_config_files malloryclient/config/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${include_ARTS_TRUE}" && test -z "${include_ARTS_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"include_ARTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"include_ARTS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by $as_me, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --tquie | --tqui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS section. -# - -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "colorscheme/Makefile" ) CONFIG_FILES="$CONFIG_FILES colorscheme/Makefile" ;; - "malloryclient/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/Makefile" ;; - "malloryclient/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES malloryclient/config/Makefile" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@target@,$target,;t t -s,@target_cpu@,$target_cpu,;t t -s,@target_vendor@,$target_vendor,;t t -s,@target_os@,$target_os,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@AMTAR@,$AMTAR,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@CONF_FILES@,$CONF_FILES,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@CPP@,$CPP,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@CXXDEPMODE@,$CXXDEPMODE,;t t -s,@WOVERLOADED_VIRTUAL@,$WOVERLOADED_VIRTUAL,;t t -s,@USE_EXCEPTIONS@,$USE_EXCEPTIONS,;t t -s,@USE_RTTI@,$USE_RTTI,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@NOOPT_CXXFLAGS@,$NOOPT_CXXFLAGS,;t t -s,@NOOPT_CFLAGS@,$NOOPT_CFLAGS,;t t -s,@KDE_USE_FINAL_TRUE@,$KDE_USE_FINAL_TRUE,;t t -s,@KDE_USE_FINAL_FALSE@,$KDE_USE_FINAL_FALSE,;t t -s,@KDE_USE_CLOSURE_TRUE@,$KDE_USE_CLOSURE_TRUE,;t t -s,@KDE_USE_CLOSURE_FALSE@,$KDE_USE_CLOSURE_FALSE,;t t -s,@KDE_NO_UNDEFINED@,$KDE_NO_UNDEFINED,;t t -s,@KDE_USE_NMCHECK_TRUE@,$KDE_USE_NMCHECK_TRUE,;t t -s,@KDE_USE_NMCHECK_FALSE@,$KDE_USE_NMCHECK_FALSE,;t t -s,@LN_S@,$LN_S,;t t -s,@ECHO@,$ECHO,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@EGREP@,$EGREP,;t t -s,@LIBTOOL@,$LIBTOOL,;t t -s,@KDE_PLUGIN@,$KDE_PLUGIN,;t t -s,@MSGFMT@,$MSGFMT,;t t -s,@GMSGFMT@,$GMSGFMT,;t t -s,@XGETTEXT@,$XGETTEXT,;t t -s,@LIBUTIL@,$LIBUTIL,;t t -s,@LIBCOMPAT@,$LIBCOMPAT,;t t -s,@LIBCRYPT@,$LIBCRYPT,;t t -s,@LIBRESOLV@,$LIBRESOLV,;t t -s,@LIB_POLL@,$LIB_POLL,;t t -s,@FRAMEWORK_COREAUDIO@,$FRAMEWORK_COREAUDIO,;t t -s,@LIBSOCKET@,$LIBSOCKET,;t t -s,@X_EXTRA_LIBS@,$X_EXTRA_LIBS,;t t -s,@LIBUCB@,$LIBUCB,;t t -s,@LIBDL@,$LIBDL,;t t -s,@X_INCLUDES@,$X_INCLUDES,;t t -s,@X_LDFLAGS@,$X_LDFLAGS,;t t -s,@x_libraries@,$x_libraries,;t t -s,@x_includes@,$x_includes,;t t -s,@LIBSM@,$LIBSM,;t t -s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t -s,@LIB_X11@,$LIB_X11,;t t -s,@QTE_NORTTI@,$QTE_NORTTI,;t t -s,@LIB_XEXT@,$LIB_XEXT,;t t -s,@LIBPTHREAD@,$LIBPTHREAD,;t t -s,@USE_THREADS@,$USE_THREADS,;t t -s,@KDE_MT_LDFLAGS@,$KDE_MT_LDFLAGS,;t t -s,@KDE_MT_LIBS@,$KDE_MT_LIBS,;t t -s,@USER_INCLUDES@,$USER_INCLUDES,;t t -s,@USER_LDFLAGS@,$USER_LDFLAGS,;t t -s,@LIBZ@,$LIBZ,;t t -s,@LIBPNG@,$LIBPNG,;t t -s,@LIBJPEG@,$LIBJPEG,;t t -s,@qt_libraries@,$qt_libraries,;t t -s,@qt_includes@,$qt_includes,;t t -s,@QT_INCLUDES@,$QT_INCLUDES,;t t -s,@QT_LDFLAGS@,$QT_LDFLAGS,;t t -s,@MOC@,$MOC,;t t -s,@UIC@,$UIC,;t t -s,@UIC_TR@,$UIC_TR,;t t -s,@LIB_QT@,$LIB_QT,;t t -s,@LIB_QPE@,$LIB_QPE,;t t -s,@kde_qtver@,$kde_qtver,;t t -s,@KDE_EXTRA_RPATH@,$KDE_EXTRA_RPATH,;t t -s,@KDE_RPATH@,$KDE_RPATH,;t t -s,@X_RPATH@,$X_RPATH,;t t -s,@kde_libraries@,$kde_libraries,;t t -s,@kde_includes@,$kde_includes,;t t -s,@KDE_LDFLAGS@,$KDE_LDFLAGS,;t t -s,@KDE_INCLUDES@,$KDE_INCLUDES,;t t -s,@all_includes@,$all_includes,;t t -s,@all_libraries@,$all_libraries,;t t -s,@AUTODIRS@,$AUTODIRS,;t t -s,@include_ARTS_TRUE@,$include_ARTS_TRUE,;t t -s,@include_ARTS_FALSE@,$include_ARTS_FALSE,;t t -s,@DCOPIDL@,$DCOPIDL,;t t -s,@DCOPIDL2CPP@,$DCOPIDL2CPP,;t t -s,@DCOP_DEPENDENCIES@,$DCOP_DEPENDENCIES,;t t -s,@MCOPIDL@,$MCOPIDL,;t t -s,@ARTSCCONFIG@,$ARTSCCONFIG,;t t -s,@KDECONFIG@,$KDECONFIG,;t t -s,@BROCKENBORING@,$BROCKENBORING,;t t -s,@MEINPROC@,$MEINPROC,;t t -s,@KDE_XSL_STYLESHEET@,$KDE_XSL_STYLESHEET,;t t -s,@kde_libs_prefix@,$kde_libs_prefix,;t t -s,@kde_libs_htmldir@,$kde_libs_htmldir,;t t -s,@kde_htmldir@,$kde_htmldir,;t t -s,@kde_appsdir@,$kde_appsdir,;t t -s,@kde_icondir@,$kde_icondir,;t t -s,@kde_sounddir@,$kde_sounddir,;t t -s,@kde_datadir@,$kde_datadir,;t t -s,@kde_locale@,$kde_locale,;t t -s,@kde_confdir@,$kde_confdir,;t t -s,@kde_mimedir@,$kde_mimedir,;t t -s,@kde_wallpaperdir@,$kde_wallpaperdir,;t t -s,@kde_bindir@,$kde_bindir,;t t -s,@xdg_appsdir@,$xdg_appsdir,;t t -s,@xdg_directorydir@,$xdg_directorydir,;t t -s,@kde_templatesdir@,$kde_templatesdir,;t t -s,@kde_servicesdir@,$kde_servicesdir,;t t -s,@kde_servicetypesdir@,$kde_servicetypesdir,;t t -s,@kde_moduledir@,$kde_moduledir,;t t -s,@tdeinitdir@,$tdeinitdir,;t t -s,@kde_styledir@,$kde_styledir,;t t -s,@kde_widgetdir@,$kde_widgetdir,;t t -s,@LIB_TDECORE@,$LIB_TDECORE,;t t -s,@LIB_TDEUI@,$LIB_TDEUI,;t t -s,@LIB_TDEIO@,$LIB_TDEIO,;t t -s,@LIB_SMB@,$LIB_SMB,;t t -s,@LIB_KAB@,$LIB_KAB,;t t -s,@LIB_KABC@,$LIB_KABC,;t t -s,@LIB_TDEHTML@,$LIB_TDEHTML,;t t -s,@LIB_TDESPELL@,$LIB_TDESPELL,;t t -s,@LIB_TDEPARTS@,$LIB_TDEPARTS,;t t -s,@LIB_TDEPRINT@,$LIB_TDEPRINT,;t t -s,@LIB_TDESYCOCA@,$LIB_TDESYCOCA,;t t -s,@LIB_KFILE@,$LIB_KFILE,;t t -s,@LIB_KFM@,$LIB_KFM,;t t -s,@TOPSUBDIRS@,$TOPSUBDIRS,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_HEADER section. -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - # Do quote $f, to prevent DOS paths from being IFS'd. - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -_ACEOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\_ACEOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -_ACEOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -_ACEOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null -do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines -echo ' fi # grep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs - -cat >>$CONFIG_STATUS <<\_ACEOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in - if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - rm -f $ac_file - mv $tmp/config.h $ac_file - fi - else - cat $tmp/config.h - rm -f $tmp/config.h - fi - # Run the commands associated with the file. - case $ac_file in - config.h ) # update the timestamp -echo 'timestamp for config.h' >"./stamp-h1" - ;; - esac -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - else - continue - fi - grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} - { (exit 1); exit 1; }; }; } - - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - esac -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -if test "x$with_fast_perl" = "xyes"; then - perl -i.bak $ac_aux_dir/conf.change.pl $CONFIG_STATUS \ - || mv $CONFIG_STATUS.bak $CONFIG_STATUS - rm -f $CONFIG_STATUS.bak -fi -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - -if test "$all_tests" = "bad"; then - if test ! "$cache_file" = "/dev/null"; then - echo "" - echo "Please remove the file $cache_file after changing your setup" - echo "so that configure will find the changes next time." - echo "" - fi -else - echo "" - echo "Good - your configure finished. Start make now" - echo "" -fi diff --git a/configure.files b/configure.files deleted file mode 100644 index 030bce8..0000000 --- a/configure.files +++ /dev/null @@ -1,2 +0,0 @@ -./admin/configure.in.min -configure.in.in diff --git a/configure.in b/configure.in deleted file mode 100644 index 365ddaa..0000000 --- a/configure.in +++ /dev/null @@ -1,78 +0,0 @@ -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -dnl Boston, MA 02111-1307, USA. - -# Original Author was Kalle@kde.org -# I lifted it in some mater. (Stephan Kulow) -# I used much code from Janos Farkas - -dnl Process this file with autoconf to produce a configure script. - -AC_INIT(acinclude.m4) dnl a source file from your sub dir - -dnl This is so we can use kde-common -AC_CONFIG_AUX_DIR(admin) - -dnl This ksh/zsh feature conflicts with `cd blah ; pwd` -unset CDPATH - -dnl Checking host/target/build systems, for make, install etc. -AC_CANONICAL_SYSTEM -dnl Perform program name transformation -AC_ARG_PROGRAM - -dnl Automake doc recommends to do this only here. (Janos) -AM_INIT_AUTOMAKE(mallory, 1.0) dnl searches for some needed programs - -KDE_SET_PREFIX - -dnl generate the config header -AM_CONFIG_HEADER(config.h) dnl at the distribution this done - -dnl Checks for programs. -AC_CHECK_COMPILERS -AC_ENABLE_SHARED(yes) -AC_ENABLE_STATIC(no) -KDE_PROG_LIBTOOL - -dnl for NLS support. Call them in this order! -dnl WITH_NLS is for the po files -AM_KDE_WITH_NLS - -KDE_USE_QT(3) -AC_PATH_KDE -#MIN_CONFIG(3) - -dnl PACKAGE set before -KDE_CREATE_SUBDIRSLIST -AC_CONFIG_FILES([ Makefile ]) -AC_CONFIG_FILES([ colorscheme/Makefile ]) -AC_CONFIG_FILES([ malloryclient/Makefile ]) -AC_CONFIG_FILES([ malloryclient/config/Makefile ]) -AC_OUTPUT -if test "$all_tests" = "bad"; then - if test ! "$cache_file" = "/dev/null"; then - echo "" - echo "Please remove the file $cache_file after changing your setup" - echo "so that configure will find the changes next time." - echo "" - fi -else - echo "" - echo "Good - your configure finished. Start make now" - echo "" -fi diff --git a/configure.in.in b/configure.in.in deleted file mode 100644 index 5037cf2..0000000 --- a/configure.in.in +++ /dev/null @@ -1,3 +0,0 @@ -#MIN_CONFIG(3) - -AM_INIT_AUTOMAKE(mallory, 1.0) diff --git a/libtool b/libtool deleted file mode 100755 index 2dde92a..0000000 --- a/libtool +++ /dev/null @@ -1,6444 +0,0 @@ -#! /bin/sh - -# libtoolT - Provide generalized library-building support services. -# Generated automatically by (GNU mallory 1.0) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags=" CXX GCJ" - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host tinbox: - -# Shell to use when invoking shell scripts. -SHELL="/bin/sh" - -# Whether or not to build shared libraries. -build_libtool_libs=yes - -# Whether or not to build static libraries. -build_old_libs=no - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=no - -# Whether or not to optimize for fast installation. -fast_install=yes - -# The host system. -host_alias= -host=i686-pc-linux-gnu - -# An echo program that does not interpret backslashes. -echo="echo" - -# The archiver. -AR="ar" -AR_FLAGS="cru" - -# A C compiler. -LTCC="gcc" - -# A language-specific compiler. -CC="gcc" - -# Is the compiler the GNU C compiler? -with_gcc=yes - -# The linker used to build libraries. -LD="/usr/i586-suse-linux/bin/ld" - -# Whether we need hard or soft links. -LN_S="ln -s" - -# A BSD-compatible nm program. -NM="/usr/bin/nm -B" - -# A sed program that does not truncate output. -SED="sed" - -# A symbol stripping program -STRIP=strip - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=file - -# Used on cygwin: DLL creation program. -DLLTOOL="dlltool" - -# Used on cygwin: object dumper. -OBJDUMP="objdump" - -# Used on cygwin: assembler. -AS="as" - -# The name of the directory that contains temporary libtool files. -objdir=.libs - -# How to create reloadable object files. -reload_flag=" -r" -reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" - -# How to pass a linker flag through the compiler. -wl="-Wl," - -# Object file suffix (normally "o"). -objext="o" - -# Old archive suffix (normally "a"). -libext="a" - -# Executable file suffix (normally ""). -exeext="" - -# Additional compiler flags for building library objects. -pic_flag=" -fPIC -DPIC" -pic_mode=default - -# What is the maximum length of a command? -max_cmd_len=32768 - -# Does compiler simultaneously support -c and -o options? -compiler_c_o="yes" - -# Must we lock files when doing compilation ? -need_locks="no" - -# Do we need the lib prefix for modules? -need_lib_prefix=no - -# Do we need a version for libraries? -need_version=no - -# Whether dlopen is supported. -dlopen_support=unknown - -# Whether dlopen of programs is supported. -dlopen_self=unknown - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=unknown - -# Compiler flag to prevent dynamic linking. -link_static_flag="-static" - -# Compiler flag to turn off builtin functions. -no_builtin_flag=" -fno-builtin" - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec="\${wl}--export-dynamic" - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive" - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec="" - -# Library versioning type. -version_type=linux - -# Format of library name prefix. -libname_spec="lib\$name" - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so" - -# The coded name of the library, if different from the real name. -soname_spec="\${libname}\${release}.so\$major" - -# Commands used to build and install an old-style archive. -RANLIB="ranlib" -old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib" -old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib" -old_postuninstall_cmds="" - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds="" - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds="" - -# Commands used to build and install a shared archive. -archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib" -archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib" -postinstall_cmds="" -postuninstall_cmds="" - -# Commands to strip libraries. -old_striplib="strip --strip-debug" -striplib="strip --strip-unneeded" - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects="" - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps="" - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path="" - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method="pass_all" - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd="\$MAGIC_CMD" - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag="" - -# Flag that forces no undefined symbols. -no_undefined_flag="" - -# Commands used to finish a libtool library installation in a directory. -finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir" - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval="" - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'" - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'" - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'" - -# This is the shared library runtime path variable. -runpath_var=LD_RUN_PATH - -# This is the shared library path variable. -shlibpath_var=LD_LIBRARY_PATH - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=no - -# How to hardcode a shared library path into an executable. -hardcode_action=immediate - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=yes - -# Flag to hardcode $libdir into a binary during linking. -# This must work even if $libdir does not exist. -hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=no - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=no - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=unsupported - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=unknown - -# Compile-time system search path for libraries -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -# Fix the shell variable $srcfile for the compiler. -fix_srcfile_path="" - -# Set to yes if exported symbols are required. -always_export_symbols=no - -# The commands to list exported symbols. -export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols" - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds="" - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - -# Symbols that must always be exported. -include_expsyms="" - -# ### END LIBTOOL CONFIG - -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" - -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift - - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - echo "$progname: invalid tag name: $tagname" 1>&2 - exit 1 - ;; - esac - - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" - else - echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - echo - echo "Copyright 1996, 1997, 1998, 1999, 2000, 2001" - echo "Free Software Foundation, Inc." - echo "This is free software; see the source for copying conditions. There is NO" - echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit 0 - ;; - - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" - done - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --preserve-dup-deps) duplicate_deps="yes" ;; - - --quiet | --silent) - show=: - ;; - - --tag) prevopt="--tag" prev=tag ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case $nonopt in - *cc | *++ | gcc* | *-gcc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - prev= - lastarg= - srcfile="$nonopt" - suppress_output= - - user_target=no - for arg - do - case $prev in - "") ;; - xcompiler) - # Aesthetically quote the previous argument. - prev= - lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - - case $arg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - # Accept any command-line options. - case $arg in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; - - -static) - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - - # Add the arguments to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - continue - ;; - esac - - case $user_target in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $lastarg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - case $user_target in - set) - ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' - case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - *.java) xform=java ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 - ;; - esac - - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. - # Only attempt this if the compiler in the base compile - # command doesn't match the default compiler. - if test -n "$available_tags" && test -z "$tagname"; then - case "$base_compile " in - "$CC "*) ;; - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when ltconfig was run. - "`$echo $CC` "*) ;; - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" - case "$base_compile " in - "$CC "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - "`$echo $CC` "*) - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - echo "$modename: unable to infer tagged configuration" - echo "$modename: specify a tag with \`--tag'" 1>&2 - exit 1 -# else -# echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi - - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi - lobj=${xdir}$objdir/$objname - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $run ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - echo $srcfile > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - - $run $rm "$libobj" "${libobj}T" - - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - else - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - fi - build_libtool_libs=no - build_old_libs=yes - prefer_static_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - base_compile="$base_compile $arg" - shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit 1 - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit 1 - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit 1 - fi - arg=$save_arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit 1 - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - ;; - esac - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - exit 1 - fi - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-mingw* | *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" - continue - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - # The PATH hackery in wrapper scripts is required on Windows - # in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -static) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - add_flags="$add_flags $arg" - ;; - - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit 1 - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit 1 - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - add_flags="$add_flags $arg" - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done # argument parsing loop - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. - # Only attempt this if the compiler in the base link - # command doesn't match the default compiler. - if test -n "$available_tags" && test -z "$tagname"; then - case $base_compile in - "$CC "*) ;; - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when ltconfig was run. - "`$echo $CC` "*) ;; - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" - case $base_compile in - "$CC "*) - # The compiler in $compile_command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - "`$echo $CC` "*) - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - echo "$modename: unable to infer tagged configuration" - echo "$modename: specify a tag with \`--tag'" 1>&2 - exit 1 -# else -# echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test "$status" -ne 0 && test ! -d "$output_objdir"; then - exit $status - fi - fi - - # Determine the type of output - case $output in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if test "X$duplicate_deps" = "Xyes" ; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - case $linkmode in - lib) - passes="conv link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit 1 - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - for deplib in $libs; do - lib= - found=no - case $deplib in - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 - continue - fi - if test "$pass" = conv && test "$allow_undefined" = yes; then - deplibs="$deplib $deplibs" - continue - fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do - # Search the libtool library - lib="$searchdir/lib${name}.la" - if test -f "$lib"; then - found=yes - break - fi - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - ;; # -l - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - ;; - *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - if test "$deplibs_check_method" != pass_all; then - echo - echo "*** Warning: Trying to link with static lib archive $deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because the file extensions .$libext of this argument makes me believe" - echo "*** that it is just a static archive that I should not used here." - else - echo - echo "*** Warning: Linking the shared library $output against the" - echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - $echo "$modename: cannot find the library \`$lib'" 1>&2 - exit 1 - fi - - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - tmp_libs= - for deplib in $dependency_libs; do - #echo "Adding $deplib to \$deplibs" - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - if test -z "$libdir"; then - if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit 1 - fi - continue - fi # $pass = conv - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit 1 - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit 1 - fi - if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - abs_ladir="$ladir" - fi - ;; - esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit 1 - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - # This is a shared library - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin*) - major=`expr $current - $age` - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - soname=`echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$extract_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - eval cmds=\"$old_archive_from_expsyms_cmds\" - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - echo - echo "*** Warning: This system can not link to static lib archive $lib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - echo "*** But as you try to build a module library, libtool will still create " - echo "*** a static module, that should work as long as the dlopening application" - echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - #if test -n "$dependency_libs" && - # { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || - # test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - #fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - fi - ;; - esac - if grep "^installed=no" $deplib > /dev/null; then - path="-L$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - path="-L$absdir" - fi - ;; - *) continue ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$deplibs $path" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - -R*) - temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit 1 - else - echo - echo "*** Warning: Linking the shared library $output against the non-libtool" - echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" - - # Check that each of the things are valid numbers. - case $current in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case $revision in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case $age in - 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - irix | nonstopux) - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - major=`expr $current - $age + 1` - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - major=`expr $current - $age` - versuffix="-$major" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - fi - - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` - deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` - done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for file magic test)" - else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a file magic. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | egrep "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: linker path does not have real file for library $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have" - echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - echo "*** with $libname but no candidates were found. (...for regex pattern test)" - else - echo "*** with $libname and none of the candidates passed a file format test" - echo "*** using a regex pattern. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - echo - echo "*** Since this library must not contain undefined symbols," - echo "*** because either the platform does not support them or" - echo "*** it was explicitly requested with -no-undefined," - echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? - fi - - # Add all flags from the command line. We here create a library, - # but those flags were only added to compile_command and - # finalize_command, which are only used when creating executables. - # So do it by hand here. - compiler_flags="$compiler_flags $add_flags" - # Only add it to commands which use CC, instead of LD, i.e. - # only to $compiler_flags - #linker_flags="$linker_flags $add_flags" - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$save_output-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi - last_robj=$output_objdir/$save_output-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$save_output-${k}.$objext - objlist=$obj - len=1 - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - # Set up a command to remove the reloadale object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" - done - - $echo "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~$rm $delfiles\" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - exit 0 - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case $output in - *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - eval cmds=\"$reload_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - ;; - - prog) - case $host in - *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; - esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G - # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath. - # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld. - # This does not apply on AIX for ia64, which uses a SysV linker. - case "$host" in - ia64-*-aix5*) ;; - *-*-aix4* | *-*-aix5*) - compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` - finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;; - esac - - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? - - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi - - exit $status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $run $rm $output - # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit 0 - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case $0 in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) exeext=.exe ;; - *) exeext= ;; - esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # win32 systems need to use the prog path for dll - # lookup to work - *-*-cygwin* | *-*-pw32*) - $echo >> $output "\ - exec \$progdir/\$program \${1+\"\$@\"} -" - ;; - - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" - ;; - - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - #oldobjs="$oldobjs$old_deplibs $non_pic_objects" - oldobjs="$old_deplibs $non_pic_objects" - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - status=$? - if test "$status" -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case $xlib in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" - status=$? - if test "$status" -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done - fi - - compiler_flags="$compiler_flags $add_flags" - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - eval cmds=\"$old_archive_cmds\" - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*"` && - test "$len" -le "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - eval cmds=\"\$concat_cmds~$old_archive_cmds\" - fi - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="($relink_command; cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlfiles="$newdlfiles $libdir/$name" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit 1 - fi - newdlprefiles="$newdlprefiles $libdir/$name" - done - dlprefiles="$newdlprefiles" - fi - $rm $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then - $echo >> $output "\ -relink_command=\"$relink_command\"" - fi - done - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - continue - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $wrapper ;; - *) . ./$wrapper ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyways - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $0 --finish$current_libdirs' - else - exit 0 - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - rmdirs= - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$objdir" - else - objdir="$dir/$objdir" - fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - - if test "$mode" = uninstall; then - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - # FIXME: should reinstall the best remaining shared library. - fi - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - - # Read the .lo file - . $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi - ;; - - *) - # Do a test to see if this is a libtool program. - if test "$mode" = clean && - (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$file - - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - fi - ;; - esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 - done - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 - fi - done - - exit $exit_status - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - fi -fi # test -z "$show_help" - -if test -n "$exec_cmd"; then - eval exec $exec_cmd - exit 1 -fi - -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: -# ### BEGIN LIBTOOL TAG CONFIG: CXX - -# Libtool was configured on host tinbox: - -# Shell to use when invoking shell scripts. -SHELL="/bin/sh" - -# Whether or not to build shared libraries. -build_libtool_libs=yes - -# Whether or not to build static libraries. -build_old_libs=no - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=yes - -# Whether or not to optimize for fast installation. -fast_install=yes - -# The host system. -host_alias= -host=i686-pc-linux-gnu - -# An echo program that does not interpret backslashes. -echo="echo" - -# The archiver. -AR="ar" -AR_FLAGS="cru" - -# A C compiler. -LTCC="gcc" - -# A language-specific compiler. -CC="g++" - -# Is the compiler the GNU C compiler? -with_gcc=yes - -# The linker used to build libraries. -LD="/usr/i586-suse-linux/bin/ld" - -# Whether we need hard or soft links. -LN_S="ln -s" - -# A BSD-compatible nm program. -NM="/usr/bin/nm -B" - -# A sed program that does not truncate output. -SED="sed" - -# A symbol stripping program -STRIP=strip - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=file - -# Used on cygwin: DLL creation program. -DLLTOOL="dlltool" - -# Used on cygwin: object dumper. -OBJDUMP="objdump" - -# Used on cygwin: assembler. -AS="as" - -# The name of the directory that contains temporary libtool files. -objdir=.libs - -# How to create reloadable object files. -reload_flag=" -r" -reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" - -# How to pass a linker flag through the compiler. -wl="-Wl," - -# Object file suffix (normally "o"). -objext="o" - -# Old archive suffix (normally "a"). -libext="a" - -# Executable file suffix (normally ""). -exeext="" - -# Additional compiler flags for building library objects. -pic_flag=" -fPIC -DPIC" -pic_mode=default - -# What is the maximum length of a command? -max_cmd_len=32768 - -# Does compiler simultaneously support -c and -o options? -compiler_c_o="yes" - -# Must we lock files when doing compilation ? -need_locks="no" - -# Do we need the lib prefix for modules? -need_lib_prefix=no - -# Do we need a version for libraries? -need_version=no - -# Whether dlopen is supported. -dlopen_support=unknown - -# Whether dlopen of programs is supported. -dlopen_self=unknown - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=unknown - -# Compiler flag to prevent dynamic linking. -link_static_flag="-static" - -# Compiler flag to turn off builtin functions. -no_builtin_flag=" -fno-builtin" - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec="\${wl}--export-dynamic" - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive" - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec="" - -# Library versioning type. -version_type=linux - -# Format of library name prefix. -libname_spec="lib\$name" - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so" - -# The coded name of the library, if different from the real name. -soname_spec="\${libname}\${release}.so\$major" - -# Commands used to build and install an old-style archive. -RANLIB="ranlib" -old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib" -old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib" -old_postuninstall_cmds="" - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds="" - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds="" - -# Commands used to build and install a shared archive. -archive_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib" -archive_expsym_cmds="\$CC -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib" -postinstall_cmds="" -postuninstall_cmds="" - -# Commands to strip libraries. -old_striplib="strip --strip-debug" -striplib="strip --strip-unneeded" - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects="/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../crti.o /usr/lib/gcc-lib/i586-suse-linux/3.3.4/crtbeginS.o" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects="/usr/lib/gcc-lib/i586-suse-linux/3.3.4/crtendS.o /usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../crtn.o" - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps="-lstdc++ -lm -lgcc_s -lc -lgcc_s" - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path="-L/usr/lib/gcc-lib/i586-suse-linux/3.3.4 -L/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/lib -L/usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../.." - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method="pass_all" - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd="\$MAGIC_CMD" - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag="" - -# Flag that forces no undefined symbols. -no_undefined_flag="" - -# Commands used to finish a libtool library installation in a directory. -finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir" - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval="" - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'" - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'" - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'" - -# This is the shared library runtime path variable. -runpath_var=LD_RUN_PATH - -# This is the shared library path variable. -shlibpath_var=LD_LIBRARY_PATH - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=no - -# How to hardcode a shared library path into an executable. -hardcode_action=immediate - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=yes - -# Flag to hardcode $libdir into a binary during linking. -# This must work even if $libdir does not exist. -hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=no - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=no - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var= - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=unknown - -# Compile-time system search path for libraries -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -# Fix the shell variable $srcfile for the compiler. -fix_srcfile_path="" - -# Set to yes if exported symbols are required. -always_export_symbols=no - -# The commands to list exported symbols. -export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols" - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds="" - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms="" - -# Symbols that must always be exported. -include_expsyms="" - -# ### END LIBTOOL TAG CONFIG: CXX - -# ### BEGIN LIBTOOL TAG CONFIG: GCJ - -# Libtool was configured on host tinbox: - -# Shell to use when invoking shell scripts. -SHELL="/bin/sh" - -# Whether or not to build shared libraries. -build_libtool_libs=yes - -# Whether or not to build static libraries. -build_old_libs=no - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=yes - -# Whether or not to optimize for fast installation. -fast_install=yes - -# The host system. -host_alias= -host=i686-pc-linux-gnu - -# An echo program that does not interpret backslashes. -echo="echo" - -# The archiver. -AR="ar" -AR_FLAGS="cru" - -# A C compiler. -LTCC="gcc" - -# A language-specific compiler. -CC="gcj" - -# Is the compiler the GNU C compiler? -with_gcc= - -# The linker used to build libraries. -LD="" - -# Whether we need hard or soft links. -LN_S="ln -s" - -# A BSD-compatible nm program. -NM="/usr/bin/nm -B" - -# A sed program that does not truncate output. -SED="sed" - -# A symbol stripping program -STRIP=strip - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=file - -# Used on cygwin: DLL creation program. -DLLTOOL="dlltool" - -# Used on cygwin: object dumper. -OBJDUMP="objdump" - -# Used on cygwin: assembler. -AS="as" - -# The name of the directory that contains temporary libtool files. -objdir=.libs - -# How to create reloadable object files. -reload_flag=" -r" -reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" - -# How to pass a linker flag through the compiler. -wl="-Wl," - -# Object file suffix (normally "o"). -objext="o" - -# Old archive suffix (normally "a"). -libext="a" - -# Executable file suffix (normally ""). -exeext="" - -# Additional compiler flags for building library objects. -pic_flag=" -DPIC" -pic_mode=default - -# What is the maximum length of a command? -max_cmd_len=32768 - -# Does compiler simultaneously support -c and -o options? -compiler_c_o="no" - -# Must we lock files when doing compilation ? -need_locks="no" - -# Do we need the lib prefix for modules? -need_lib_prefix=no - -# Do we need a version for libraries? -need_version=no - -# Whether dlopen is supported. -dlopen_support=unknown - -# Whether dlopen of programs is supported. -dlopen_self=unknown - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=unknown - -# Compiler flag to prevent dynamic linking. -link_static_flag="-static" - -# Compiler flag to turn off builtin functions. -no_builtin_flag=" -fno-builtin" - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec="\${wl}--export-dynamic" - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive" - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec="" - -# Library versioning type. -version_type=linux - -# Format of library name prefix. -libname_spec="lib\$name" - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so" - -# The coded name of the library, if different from the real name. -soname_spec="\${libname}\${release}.so\$major" - -# Commands used to build and install an old-style archive. -RANLIB="ranlib" -old_archive_cmds="" -old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib" -old_postuninstall_cmds="" - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds="" - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds="" - -# Commands used to build and install a shared archive. -archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib" -archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib" -postinstall_cmds="" -postuninstall_cmds="" - -# Commands to strip libraries. -old_striplib="strip --strip-debug" -striplib="strip --strip-unneeded" - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects="" - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps="" - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path="" - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method="pass_all" - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd="\$MAGIC_CMD" - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag="" - -# Flag that forces no undefined symbols. -no_undefined_flag="" - -# Commands used to finish a libtool library installation in a directory. -finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir" - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval="" - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'" - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'" - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'" - -# This is the shared library runtime path variable. -runpath_var=LD_RUN_PATH - -# This is the shared library path variable. -shlibpath_var=LD_LIBRARY_PATH - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=no - -# How to hardcode a shared library path into an executable. -hardcode_action=immediate - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=yes - -# Flag to hardcode $libdir into a binary during linking. -# This must work even if $libdir does not exist. -hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=no - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=no - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=unsupported - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=unknown - -# Compile-time system search path for libraries -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -# Fix the shell variable $srcfile for the compiler. -fix_srcfile_path="" - -# Set to yes if exported symbols are required. -always_export_symbols=no - -# The commands to list exported symbols. -export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols" - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds="" - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - -# Symbols that must always be exported. -include_expsyms="" - -# ### END LIBTOOL TAG CONFIG: GCJ - diff --git a/malloryclient/CMakeLists.txt b/malloryclient/CMakeLists.txt new file mode 100644 index 0000000..dee9313 --- /dev/null +++ b/malloryclient/CMakeLists.txt @@ -0,0 +1,36 @@ +################################################################################ +# twin-style-mallory # +# ------------------ # +# This file is licensed under the terms of GNU GPL v3 or later. # +# Improvements and feedback are welcome. # +################################################################################ + +tde_import(twin) + +include_directories( + ${CMAKE_BINARY_DIR} + ${CMAKE_CURRENT_BINARY_DIR} + ${CMAKE_CURRENT_SOURCE_DIR} + ${TDE_INCLUDE_DIR} + ${TQT_INCLUDE_DIRS} +) + +link_directories( + ${TQT_LIBRARY_DIRS} + ${TDE_LIBRARY_DIRS} +) + +### Libraries ################################################################## +tde_add_kpart(twin_mallory AUTOMOC + SOURCES + malloryclient.cpp malloryhandler.cpp + mallorybutton.cpp pixmaps.cpp embeddata.cpp + LINK tdeui-shared tdecorations-shared + DESTINATION ${PLUGIN_INSTALL_DIR} +) + +### Data ####################################################################### +tde_create_translated_desktop( + SOURCE mallory.desktop + DESTINATION ${DATA_INSTALL_DIR}/twin +) \ No newline at end of file diff --git a/malloryclient/mallory.desktop b/malloryclient/mallory.desktop index 2a82b26..b22738c 100644 --- a/malloryclient/mallory.desktop +++ b/malloryclient/mallory.desktop @@ -2,4 +2,4 @@ [Desktop Entry] Encoding=UTF-8 Name=Mallory -X-TDE-Library=twin3_mallory +X-TDE-Library=twin_mallory diff --git a/stamp-h.in b/stamp-h.in deleted file mode 100644 index e69de29..0000000 diff --git a/stamp-h1 b/stamp-h1 deleted file mode 100644 index 4547fe1..0000000 --- a/stamp-h1 +++ /dev/null @@ -1 +0,0 @@ -timestamp for config.h diff --git a/subdirs b/subdirs deleted file mode 100644 index fa6b51e..0000000 --- a/subdirs +++ /dev/null @@ -1,2 +0,0 @@ -colorscheme -malloryclient