commit 0eec68a32197fcf878eabe4434badcf73e2d4741 Author: Michele Calgaro Date: Tue Oct 17 19:57:10 2023 +0900 Initial code import from https://www.trinity-look.org/p/1100374. As per note on the website, the code has been abandoned. There is no license file in the source code, but given the package was available on the KDE3 store back in the days, it is reasonable to assume it was distributed under GPL2 license Signed-off-by: Michele Calgaro diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..ade04a9 --- /dev/null +++ b/AUTHORS @@ -0,0 +1,6 @@ +Authors +------- +Example theme: +David Johnson +Fahrenheit theme: +Peter Clark diff --git a/BUGS b/BUGS new file mode 100644 index 0000000..c84bb8d --- /dev/null +++ b/BUGS @@ -0,0 +1,15 @@ +- When moving a shaded window, the window sometimes unshades poorly and +following error occurs: + + kwin: X_ConfigureWindow(0x0): BadValue (integer parameter out of range +for operation) + +To restore and resize the window, there are two options: +either maximize the window and then resize it, or right-click on the +window while holding down the Alt button and resize the window that way. +I believe that this bug is related to the masking operation, but haven't +been able to hunt it down yet. + +- The blank bar to the right of the button area does not accept +double-clicks if you want to shade the window. For now, in order to +shade a window, you need to double-click in the title area only. diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..b00f393 --- /dev/null +++ b/INSTALL @@ -0,0 +1,65 @@ +Example Installation in a Nutshell: +==================================== + +1) Type 'make -f Makefile.cvs' + +2) Type './configure' + +3) Type 'make' + +4) Type (as root) 'make install' + +Example Installation in More Detail: +===================================== + +0) Make sure that the prerequisite KDE 3.2 development libraries and +headers are installed first. These can be found at +. + +1) Unzip and untar the package into its own directory. Change into +this directory, and read the README file. (I'm assuming that +you've read this, the INSTALL file :-)) + +2) Type './configure --help", and peruse the configure options +available. It may be necessary to use one or more of these options +on your system. + +3) Type './configure' to configure the software for your system. If +you're using `csh' on an old version of System V, you might need +to type sh ./configure' instead. + +4) Type 'make' to compile the package. + +5) If you are not logged in as root, type 'su' and enter the root +password to switch over to the root account. This is not necessary +if you configured the software to install to your home directory/ + +6) Type 'make install' to install the software. + +7) Activate the styles, decorations and color schemes through the +KDE Control Center or the Preferences menu. + +8) You can uninstall the software by typing 'make uninstall'. + +A Note on the KDE Library +======================== + +If you are having problems configuring the software, first make sure +that the required KDE 3.2 or greater libraries are installed. Several +systems have broken this into several packages. You will need both +the runtime and the development packages. + +If you still have problems, set the KDEDIR environment variable and +the --prefix configure option to the location where you installed +KDE. Also make sure that you are using GNU make and not the standard +make everyone else uses. + +Rebuilding the Configuration +============================ + +If you ever need to rebuild the configuration files, type the +following in thebase directory of the distribution: + make -f Makefile.cvs + +You will need the current automake/autoconf set of programs. + diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..13b33bd --- /dev/null +++ b/Makefile.am @@ -0,0 +1,20 @@ +SUBDIRS = $(TOPSUBDIRS) + +MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files + +EXTRA_DIST = Makefile.cvs admin + +AUTOMAKE_OPTIONS = foreign + +$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs + cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; + +$(top_srcdir)/subdirs: + cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs + +$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in + @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 + +dist-hook: + cd $(top_distdir) && perl admin/am_edit -padmin + cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs diff --git a/Makefile.cvs b/Makefile.cvs new file mode 100644 index 0000000..828868a --- /dev/null +++ b/Makefile.cvs @@ -0,0 +1,7 @@ +all: + $(MAKE) -f admin/Makefile.common cvs + +dist: + $(MAKE) -f admin/Makefile.common dist + +.SILENT: diff --git a/README b/README new file mode 100644 index 0000000..d993032 --- /dev/null +++ b/README @@ -0,0 +1,70 @@ +INTRODUCTION +============ + First, a word about Fahrenheit. The theme, like its namesake, is +not meant to be the final word in practicality or usability. Think about +it: why hasn't the US switched to Celcius, a much more practical and +usable temperature scale? It makes much more sense to base a temperature +scale around water (since so much of life literally revolves around +water). Just what is 0°F and 100°F anyways? It makes no sense at all, +other than the inertia of tradition. + Fahrenheit the theme is much the same way, except that it lacks +the temperture scale's inertia, but it also looks (in the author's +opinion) more visually interesting than the standard square box. Be it +the lickable OSX or the crayola WinXP, the fact remains that even by +rounding out the corners, most window decorations are hopelessly mired in +squareville. Now, there are good reasons for square. Square is usable. +Square is practical. Square is comforting and familiar, like a teddy +bear that's gotten the stuffing squeezed out of it. But square is also +boring, overdone, and, like week-old leftovers, there's only so much you +can do with it before you get sick of turkey sandwiches and turkey +quiche and turkey omlettes and cream of turkey soup. + To relieve my boredom, there's Fahrenheit. That's right, this is +about _me_. If you like it, you're more than welcome to use it. If you +don't, then forget about it. It's not for you. Go back to squaredom. I +don't care. Yes, this violates Fitt's law in obscene and unthinkable +ways. The buttons may be too small, but then, I have fine motor control +and don't find it a problem in the least. I find it usable; therefore, +it is usable for me. It wastes space with all the funky curves and bars. +Well, my monitor is 1400x1050, so I've got space to waste. + +COMPILING +========= +A straight-forward affair; read the INSTALL file for more details, but +the following ought to be enough: +1) make -f Makefile.cvs +2) ./configure + (Depending on your system, you may need to add '--prefix=/usr' +and if it can't find the location of the Qt libs and includes, those as +well. './configure --help' will tell you what you need to know.) +3) make +4) (as root) make install + +If you have problems compiling, make sure that you have the necessary +KDE development files installed. And before complaining that you can't +compile, read through the discussions for other KDE 3.2 borders. There +is a 99.9% chance that your problem already has a long and glorious +precedent set by others. + +COLORS +====== + There are six color settings that you will want to play with +in the Control Panel:Appearances & Themes:Colors dialog. These are: +- Active Title Bar +- Inactive Title Bar +- Active Window Frame +- Inactive Window Frame +- Active Window Handle +- Inactive Window Handle + The title bar and window frame colors should be self-evident. +Less obviously, however, are the window handle settings. This changes +the color of the grip lines in the upper-right hand corner of the frame. + +THANKS +====== + Inspiration: Fahrenheit was inspired by the mock-up screenshots +of a hypothetical future BeOS window border, GonX. See the screenshots +at http://cotito.free.fr/projects/. + David Johnson on the kwin mailing list was of great help to me +while writing this decoration. His Example decoration +(http://www.kde-look.org/content/show.php?content=6332) is also a great +framework for creating new decorations as well. diff --git a/admin/CVS/Entries b/admin/CVS/Entries new file mode 100644 index 0000000..dd86dd2 --- /dev/null +++ b/admin/CVS/Entries @@ -0,0 +1,28 @@ +/Doxyfile.am/1.19/Fri Dec 12 14:14:04 2003// +/Doxyfile.global/1.22/Fri Mar 26 13:38:44 2004// +/Makefile.common/1.159/Wed Aug 27 12:21:25 2003// +/acinclude.m4.in/2.448/Tue Mar 30 13:00:33 2004// +/am_edit/1.411/Wed Mar 24 22:26:00 2004// +/bcheck.pl/1.2/Thu Oct 23 12:48:34 2003// +/compile/1.1/Mon Sep 30 12:18:17 2002// +/conf.change.pl/1.11/Wed Nov 19 10:21:14 2003// +/config.guess/1.17/Sat Oct 26 16:44:28 2002// +/config.pl/1.20/Fri Dec 26 17:16:14 2003// +/config.sub/1.19/Sat Oct 26 16:44:28 2002// +/configure.in.bot.end/1.4/Mon Mar 15 19:10:12 2004// +/configure.in.min/1.11/Wed Nov 7 11:17:28 2001// +/cvs-clean.pl/1.3/Tue Aug 12 20:52:03 2003// +/cvs.sh/1.125/Mon Mar 15 10:40:43 2004// +/debianrules/1.117/Fri Feb 27 22:51:51 2004// +/depcomp/1.7/Wed Apr 16 21:53:18 2003// +/deps.am/1.6/Wed Sep 17 18:29:45 2003// +/detect-autoconf.sh/1.10/Wed Feb 11 17:39:24 2004// +/install-sh/1.9/Thu Aug 7 09:41:31 2003// +/libtool.m4.in/1.83/Fri Apr 2 15:39:50 2004// +/ltmain.sh/1.64/Sat Feb 14 03:39:44 2004// +/missing/1.11/Sat Oct 26 16:44:28 2002// +/mkinstalldirs/1.9/Sat Oct 26 16:53:16 2002// +/nmcheck/1.4/Thu Mar 6 18:58:29 2003// +/oldinclude.m4.in/2.2/Wed Jan 7 01:15:32 2004// +/ylwrap/1.5/Fri Oct 5 00:46:36 2001// +D diff --git a/admin/CVS/Repository b/admin/CVS/Repository new file mode 100644 index 0000000..7762a91 --- /dev/null +++ b/admin/CVS/Repository @@ -0,0 +1 @@ +kde-common/admin diff --git a/admin/CVS/Root b/admin/CVS/Root new file mode 100644 index 0000000..f106931 --- /dev/null +++ b/admin/CVS/Root @@ -0,0 +1 @@ +:pserver:anonymous@anoncvs.kde.org:/home/kde diff --git a/admin/Doxyfile.am b/admin/Doxyfile.am new file mode 100644 index 0000000..0d6039a --- /dev/null +++ b/admin/Doxyfile.am @@ -0,0 +1,179 @@ +## generate API documentation with doxygen +apidox-am-yes: + @if test "$(subdir)" != "."; then \ + $(mkinstalldirs) $(top_builddir)/apidocs/$(subdir) ;\ + if test ! -x $(top_builddir)/apidocs/common; then \ + if test -d $(top_srcdir)/doc/common; then \ + common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\ + else \ + common_dir=$(kde_libs_htmldir)/en/common ;\ + fi ;\ + $(LN_S) $$common_dir $(top_builddir)/apidocs/common; \ + fi ;\ + cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \ + echo "PROJECT_NAME = \"$(subdir) Library\"" >> Doxyfile; \ + echo "PROJECT_NUMBER = \"Version $(VERSION)\"" >> Doxyfile; \ + echo "INPUT = $(srcdir)" >> Doxyfile; \ + echo "IMAGE_PATH = $(top_srcdir)/doc/api" >> Doxyfile ;\ + echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile; \ + echo "HTML_OUTPUT = $(subdir)/html" >> Doxyfile; \ + echo "HTML_HEADER = $(top_builddir)/apidocs/common/header.html" >> Doxyfile;\ + echo "HTML_FOOTER = $(top_builddir)/apidocs/common/footer.html" >> Doxyfile;\ + echo "HTML_STYLESHEET = $(top_builddir)/apidocs/common/doxygen.css" >> Doxyfile;\ + echo "LATEX_OUTPUT = $(subdir)/latex" >> Doxyfile; \ + echo "RTF_OUTPUT = $(subdir)/rtf" >> Doxyfile; \ + echo "MAN_OUTPUT = $(subdir)/man" >> Doxyfile; \ + echo "GENERATE_HTML = $(GENERATE_FLAG)" >> Doxyfile ;\ + echo "GENERATE_MAN = $(GENERATE_FLAG)" >> Doxyfile ;\ + echo "GENERATE_LATEX = $(GENERATE_FLAG)" >> Doxyfile ;\ + if test -n "$(DOXYGEN_EXCLUDE)"; then \ + patterns= ;\ + dirs= ;\ + for item in `echo "$(DOXYGEN_EXCLUDE)"`; do \ + if test -d "$(srcdir)/$$item"; then \ + dirs="$$dirs $(srcdir)/$$item/" ;\ + else \ + patterns="$$patterns $$item" ;\ + fi ;\ + done ;\ + echo "EXCLUDE_PATTERNS += $$patterns" >> Doxyfile; \ + echo "EXCLUDE += $$dirs" >> Doxyfile ;\ + fi ;\ + echo "TAGFILES = \\" >> Doxyfile; \ + tags='$(DOXYGEN_REFERENCES) qt'; for tag in $$tags; do \ + tagpath= ;\ + path="../../$$tag" ;\ + if test -f $(top_builddir)/apidocs/$$tag/$$tag.tag; then \ + tagpath="$(top_builddir)/apidocs/$$tag/$$tag.tag" ;\ + else \ + tagpath=`ls -1 $(kde_htmldir)/en/*-apidocs/$$tag/$$tag.tag 2> /dev/null` ;\ + if test -n "$$tagpath"; then \ + path=`echo $$tagpath | sed -e "s,.*/\([^/]*-apidocs\)/$$tag/$$tag.tag,../../../\1/$$tag,"` ;\ + fi ;\ + fi ;\ + if test "$$tag" = qt; then \ + echo $$tagpath=$(QTDOCDIR) >> Doxyfile ;\ + else if test -n "$$tagpath"; then \ + echo "$$tagpath=$$path/html \\" >> Doxyfile ;\ + fi ;\ + fi ;\ + done ;\ + echo "GENERATE_TAGFILE = $(top_builddir)/apidocs/$(subdir)/`basename $(subdir)`.tag" >> Doxyfile ;\ + echo "IGNORE_PREFIX = K" >> Doxyfile ;\ + echo "HAVE_DOT = $(KDE_HAVE_DOT)" >> Doxyfile ;\ + $(DOXYGEN) Doxyfile ;\ + fi + +apidox-am-no: + +install-data-local: install-apidox + +## install API documentation +install-apidox: + @if test "$(subdir)" != "."; then \ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \ + if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \ + echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + fi; \ + if test -d $(top_builddir)/apidocs/$(subdir)/html; then \ + list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \ + echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\ + for file in $$list; do \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ + done; \ + fi; \ + rm -f $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \ + $(LN_S) $(kde_libs_htmldir)/en/common $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/common; \ + else\ + if test -d $(top_builddir)/apidocs; then \ + $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\ + list=`cd $(top_builddir)/apidocs && ls -1`; \ + echo "installing $(top_builddir)/apidocs/$$file" ;\ + for file in $$list; do \ + if test -f $(top_builddir)/apidocs/$$file; then \ + $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ + fi; \ + done ; fi; \ + fi + +uninstall-local: uninstall-apidox + +## uninstall API documentation +uninstall-apidox: + @if test "$(subdir)" != "."; then \ + if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \ + rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ + fi\ + else\ + if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \ + rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ + fi\ + fi + +apidox: + @if test "$(subdir)" != "."; then \ + $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\ + else \ + $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\ + fi + @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \ + list='$(SUBDIRS)'; \ + for subdir in $$list; do \ + if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \ + echo "Making apidox in $$subdir"; \ + if test "$$subdir" != "."; then \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no apidox) || exit 1; \ + fi ; fi ;\ + done; \ + for subdir in $$list; do \ + if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am; then \ + echo "Making apidox in $$subdir"; \ + if test "$$subdir" != "."; then \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=yes apidox) || exit 1; \ + fi ; fi ;\ + done; \ + fi + +apidox-am-toplevel-no: +apidox-am-toplevel-yes: + @echo "*** Creating API documentation main page"; \ + cp $(top_srcdir)/admin/Doxyfile.global Doxyfile; \ + echo "PROJECT_NAME = \"$(DOXYGEN_PROJECT_NAME)\"" >> Doxyfile ; \ + echo "PROJECT_NUMBER = \"$(DOXYGEN_PROJECT_NUMBER)\"" >> Doxyfile ; \ + echo "INPUT = $(top_srcdir)" >> Doxyfile ; \ + echo "OUTPUT_DIRECTORY = $(top_builddir)/apidocs" >> Doxyfile ; \ + echo "FILE_PATTERNS = *.dox" >> Doxyfile ; \ + echo "RECURSIVE = NO" >> Doxyfile ; \ + echo "SOURCE_BROWSER = NO" >> Doxyfile ; \ + echo "ALPHABETICAL_INDEX = NO" >> Doxyfile ; \ + echo "HTML_OUTPUT = ." >> Doxyfile ; \ + echo "HTML_HEADER = apidocs/common/mainheader.html" >> Doxyfile ; \ + echo "HTML_FOOTER = apidocs/common/mainfooter.html" >> Doxyfile ; \ + echo "HTML_STYLESHEET = apidocs/common/doxygen.css" >> Doxyfile ; \ + echo "GENERATE_LATEX = NO" >> Doxyfile ; \ + echo "GENERATE_RTF = NO" >> Doxyfile ; \ + echo "GENERATE_MAN = NO" >> Doxyfile ; \ + echo "GENERATE_XML = NO" >> Doxyfile ; \ + echo "GENERATE_AUTOGEN_DEF = NO" >> Doxyfile ; \ + echo "ENABLE_PREPROCESSING = NO" >> Doxyfile ; \ + echo "CLASS_DIAGRAMS = NO" >> Doxyfile ; \ + echo "HAVE_DOT = NO" >> Doxyfile ; \ + echo "GENERATE_HTML = YES" >> Doxyfile ;\ + $(mkinstalldirs) $(top_builddir)/apidocs ; \ + rm -f $(top_builddir)/apidocs/common ; \ + if test -d $(top_srcdir)/doc/common; then \ + common_dir=`cd $(top_srcdir)/doc/common && pwd` ;\ + else \ + common_dir=$(kde_libs_htmldir)/en/common ;\ + fi ;\ + $(LN_S) $$common_dir $(top_builddir)/apidocs/common ;\ + doxygen Doxyfile; \ + rm -f Doxyfile + +.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes + + +# Local Variables: +# mode: makefile +# End: diff --git a/admin/Doxyfile.global b/admin/Doxyfile.global new file mode 100644 index 0000000..54c8a15 --- /dev/null +++ b/admin/Doxyfile.global @@ -0,0 +1,1132 @@ +# Doxyfile 1.3.6 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = ../apidocs/ + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, +# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en +# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, +# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = NO + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is used +# as the annotated text. Otherwise, the brief description is used as-is. If left +# blank, the following values are used ("$name" is automatically replaced with the +# name of the entity): "The $name class" "The $name widget" "The $name file" +# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = YES + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited +# members of a class in the documentation of that class as if those members were +# ordinary class members. Constructors, destructors and assignment operators of +# the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. It is allowed to use relative paths in the argument list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = obsolete=@deprecated + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = YES + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = NO + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = NO + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = NO + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. + +WARN_FORMAT = + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp +# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc + +FILE_PATTERNS = *.h \ + *.cpp \ + *.cc \ + *.hpp \ + *.dox \ + *.c++ \ + *.cxx \ + *.h++ \ + *.hh + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories +# that are symbolic links (a Unix filesystem feature) are excluded from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. + +EXCLUDE_PATTERNS = *.moc.* \ + moc* \ + *.all_cpp.* \ + *unload.* \ + */test/* \ + */tests/* + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. + +INPUT_FILTER = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 3 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = K + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = NO + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = ../apidocs/common/header.html + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = ../apidocs/common/footer.html + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = ../apidocs/common/doxygen.css + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = YES + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .kde3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_PREDEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. + +PREDEFINED = QT_VERSION=320 \ + __cplusplus \ + Q_WS_X11 + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse the +# parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = NO + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or +# super classes. Setting the tag to NO turns the diagrams off. Note that this +# option is superseded by the HAVE_DOT option below. This is only a fallback. It is +# recommended to install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = NO + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found on the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 800 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes that +# lay further from the root node will be omitted. Note that setting this option to +# 1 or 2 may greatly reduce the computation time needed for large code bases. Also +# note that a graph may be further truncated if the graph's image dimensions are +# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). +# If 0 is used for the depth value (the default), the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/admin/Makefile.common b/admin/Makefile.common new file mode 100644 index 0000000..0ecd10d --- /dev/null +++ b/admin/Makefile.common @@ -0,0 +1,35 @@ +### Makefile.common +### +### Copyright (C) 2002 by the KDE developers + +### All the real work is done by the shellscript cvs.sh + +SHELL=/bin/sh + +cvs dist cvs-clean configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4: + @admindir=$(admindir); \ + if test "x$$admindir" = x; then \ + admindir=.; until test -f $$admindir/admin/cvs.sh; do \ + admindir=$$admindir/..; \ + if test `cd $$admindir && pwd` = / ; then break; fi; \ + done; \ + admindir=$$admindir/admin; \ + if test -f $$admindir/cvs.sh; then :; else \ + echo "Can't find the admin/ directory in any parent of the"; \ + echo "current directory. Please set it with admindir=..."; \ + exit 1; \ + fi; \ + fi; \ + if test "$@" = "package-merge"; then \ + MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \ + $(SHELL) $$admindir/cvs.sh package-merge ;\ + else \ + MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\ + fi + +configure.in: configure.files subdirs +configure.files: subdirs + +.SILENT: + +.PHONY: cvs dist cvs-clean package-merge package-messages diff --git a/admin/acinclude.m4.in b/admin/acinclude.m4.in new file mode 100644 index 0000000..8c5d37c --- /dev/null +++ b/admin/acinclude.m4.in @@ -0,0 +1,5437 @@ +## -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +dnl Boston, MA 02111-1307, USA. + +dnl IMPORTANT NOTE: +dnl Please do not modify this file unless you expect your modifications to be +dnl carried into every other module in the repository. +dnl +dnl Single-module modifications are best placed in configure.in for kdelibs +dnl and kdebase or configure.in.in if present. + +# KDE_PATH_X_DIRECT +dnl Internal subroutine of AC_PATH_X. +dnl Set ac_x_includes and/or ac_x_libraries. +AC_DEFUN([KDE_PATH_X_DIRECT], +[ +AC_REQUIRE([KDE_CHECK_LIB64]) + +if test "$ac_x_includes" = NO; then + # Guess where to find include files, by looking for this one X11 .h file. + test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h + + # First, try using that file with no special directory specified. +AC_TRY_CPP([#include <$x_direct_test_include>], +[# We can compile using X headers with no special include directory. +ac_x_includes=], +[# Look for the header file in a standard set of common directories. +# Check X11 before X11Rn because it is often a symlink to the current release. + for ac_dir in \ + /usr/X11/include \ + /usr/X11R6/include \ + /usr/X11R5/include \ + /usr/X11R4/include \ + \ + /usr/include/X11 \ + /usr/include/X11R6 \ + /usr/include/X11R5 \ + /usr/include/X11R4 \ + \ + /usr/local/X11/include \ + /usr/local/X11R6/include \ + /usr/local/X11R5/include \ + /usr/local/X11R4/include \ + \ + /usr/local/include/X11 \ + /usr/local/include/X11R6 \ + /usr/local/include/X11R5 \ + /usr/local/include/X11R4 \ + \ + /usr/X386/include \ + /usr/x386/include \ + /usr/XFree86/include/X11 \ + \ + /usr/include \ + /usr/local/include \ + /usr/unsupported/include \ + /usr/athena/include \ + /usr/local/x11r5/include \ + /usr/lpp/Xamples/include \ + \ + /usr/openwin/include \ + /usr/openwin/share/include \ + ; \ + do + if test -r "$ac_dir/$x_direct_test_include"; then + ac_x_includes=$ac_dir + break + fi + done]) +fi # $ac_x_includes = NO + +if test "$ac_x_libraries" = NO; then + # Check for the libraries. + + test -z "$x_direct_test_library" && x_direct_test_library=Xt + test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc + + # See if we find them without any special options. + # Don't add to $LIBS permanently. + ac_save_LIBS="$LIBS" + LIBS="-l$x_direct_test_library $LIBS" +AC_TRY_LINK(, [${x_direct_test_function}()], +[LIBS="$ac_save_LIBS" +# We can link X programs with no special library path. +ac_x_libraries=], +[LIBS="$ac_save_LIBS" +# First see if replacing the include by lib works. +# Check X11 before X11Rn because it is often a symlink to the current release. +for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ + /usr/X11/lib${kdelibsuff} \ + /usr/X11R6/lib${kdelibsuff} \ + /usr/X11R5/lib${kdelibsuff} \ + /usr/X11R4/lib${kdelibsuff} \ + \ + /usr/lib${kdelibsuff}/X11 \ + /usr/lib${kdelibsuff}/X11R6 \ + /usr/lib${kdelibsuff}/X11R5 \ + /usr/lib${kdelibsuff}/X11R4 \ + \ + /usr/local/X11/lib${kdelibsuff} \ + /usr/local/X11R6/lib${kdelibsuff} \ + /usr/local/X11R5/lib${kdelibsuff} \ + /usr/local/X11R4/lib${kdelibsuff} \ + \ + /usr/local/lib${kdelibsuff}/X11 \ + /usr/local/lib${kdelibsuff}/X11R6 \ + /usr/local/lib${kdelibsuff}/X11R5 \ + /usr/local/lib${kdelibsuff}/X11R4 \ + \ + /usr/X386/lib${kdelibsuff} \ + /usr/x386/lib${kdelibsuff} \ + /usr/XFree86/lib${kdelibsuff}/X11 \ + \ + /usr/lib${kdelibsuff} \ + /usr/local/lib${kdelibsuff} \ + /usr/unsupported/lib${kdelibsuff} \ + /usr/athena/lib${kdelibsuff} \ + /usr/local/x11r5/lib${kdelibsuff} \ + /usr/lpp/Xamples/lib${kdelibsuff} \ + /lib/usr/lib${kdelibsuff}/X11 \ + \ + /usr/openwin/lib${kdelibsuff} \ + /usr/openwin/share/lib${kdelibsuff} \ + ; \ +do +dnl Don't even attempt the hair of trying to link an X program! + for ac_extension in a so sl; do + if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then + ac_x_libraries=$ac_dir + break 2 + fi + done +done]) +fi # $ac_x_libraries = NO +]) + + +dnl ------------------------------------------------------------------------ +dnl Find a file (or one of more files in a list of dirs) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_FIND_FILE], +[ +$3=NO +for i in $2; +do + for j in $1; + do + echo "configure: __oline__: $i/$j" >&AC_FD_CC + if test -r "$i/$j"; then + echo "taking that" >&AC_FD_CC + $3=$i + break 2 + fi + done +done +]) + +dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, +dnl if-not-found, test-parameter, prepend-path) +dnl +dnl Look for program-name in list-of-dirs+$PATH. +dnl If prepend-path is set, look in $PATH+list-of-dirs instead. +dnl If found, $variable-name is set. If not, if-not-found is evaluated. +dnl test-parameter: if set, the program is executed with this arg, +dnl and only a successful exit code is required. +AC_DEFUN([KDE_FIND_PATH], +[ + AC_MSG_CHECKING([for $1]) + if test -n "$$2"; then + kde_cv_path="$$2"; + else + kde_cache=`echo $1 | sed 'y%./+-%__p_%'` + + AC_CACHE_VAL(kde_cv_path_$kde_cache, + [ + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + dirs="" + for dir in $PATH; do + dirs="$dirs $dir" + done + if test -z "$6"; then dnl Append dirs in PATH (default) + dirs="$3 $dirs" + else dnl Prepend dirs in PATH (if 6th arg is set) + dirs="$dirs $3" + fi + IFS=$kde_save_IFS + + for dir in $dirs; do + if test -x "$dir/$1"; then + if test -n "$5" + then + evalstr="$dir/$1 $5 2>&1 " + if eval $evalstr; then + kde_cv_path="$dir/$1" + break + fi + else + kde_cv_path="$dir/$1" + break + fi + fi + done + + eval "kde_cv_path_$kde_cache=$kde_cv_path" + + ]) + + eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" + + fi + + if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then + AC_MSG_RESULT(not found) + $4 + else + AC_MSG_RESULT($kde_cv_path) + $2=$kde_cv_path + + fi +]) + +AC_DEFUN([KDE_MOC_ERROR_MESSAGE], +[ + AC_MSG_ERROR([No Qt meta object compiler (moc) found! +Please check whether you installed Qt correctly. +You need to have a running moc binary. +configure tried to run $ac_cv_path_moc and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable MOC to the right one before running +configure. +]) +]) + +AC_DEFUN([KDE_UIC_ERROR_MESSAGE], +[ + AC_MSG_WARN([No Qt ui compiler (uic) found! +Please check whether you installed Qt correctly. +You need to have a running uic binary. +configure tried to run $ac_cv_path_uic and the test didn't +succeed. If configure shouldn't have tried this one, set +the environment variable UIC to the right one before running +configure. +]) +]) + + +AC_DEFUN([KDE_CHECK_UIC_FLAG], +[ + AC_MSG_CHECKING([whether uic supports -$1 ]) + kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` + AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, + [ + cat >conftest.ui < +EOT + ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" + if AC_TRY_EVAL(ac_uic_testrun); then + eval "kde_cv_prog_uic_$kde_cache=yes" + else + eval "kde_cv_prog_uic_$kde_cache=no" + fi + rm -f conftest* + ]) + + if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then + AC_MSG_RESULT([yes]) + : + $3 + else + AC_MSG_RESULT([no]) + : + $4 + fi +]) + + +dnl ------------------------------------------------------------------------ +dnl Find the meta object compiler and the ui compiler in the PATH, +dnl in $QTDIR/bin, and some more usual places +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_MOC_UIC], +[ + AC_REQUIRE([KDE_CHECK_PERL]) + qt_bindirs="" + for dir in $kde_qt_dirs; do + qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" + done + qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" + if test ! "$ac_qt_bindir" = "NO"; then + qt_bindirs="$ac_qt_bindir $qt_bindirs" + fi + + KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) + if test -z "$UIC_NOT_NEEDED"; then + KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) + if test -z "$UIC_PATH" ; then + KDE_UIC_ERROR_MESSAGE + exit 1 + else + UIC=$UIC_PATH + + if test $kde_qtver = 3; then + KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) + KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) + + if test x$ac_uic_supports_libpath = xyes; then + UIC="$UIC -L \$(kde_widgetdir)" + fi + if test x$ac_uic_supports_nounload = xyes; then + UIC="$UIC -nounload" + fi + fi + fi + else + UIC="echo uic not available: " + fi + + AC_SUBST(MOC) + AC_SUBST(UIC) + + UIC_TR="i18n" + if test $kde_qtver = 3; then + UIC_TR="tr2i18n" + fi + + AC_SUBST(UIC_TR) +]) + +AC_DEFUN([KDE_1_CHECK_PATHS], +[ + KDE_1_CHECK_PATH_HEADERS + + KDE_TEST_RPATH= + + if test -n "$USE_RPATH"; then + + if test -n "$kde_libraries"; then + KDE_TEST_RPATH="-R $kde_libraries" + fi + + if test -n "$qt_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" + fi + + if test -n "$x_libraries"; then + KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" + fi + + KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" + fi + +AC_MSG_CHECKING([for KDE libraries installed]) +ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + AC_MSG_RESULT(yes) +else + AC_MSG_ERROR([your system fails at linking a small KDE application! +Check, if your compiler is installed correctly and if you have used the +same compiler to compile Qt and kdelibs as you did use now. +For more details about this problem, look at the end of config.log.]) +fi + +if eval `KDEDIR= ./conftest 2>&5`; then + kde_result=done +else + kde_result=problems +fi + +KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log +kde_have_all_paths=yes + +KDE_SET_PATHS($kde_result) + +]) + +AC_DEFUN([KDE_SET_PATHS], +[ + kde_cv_all_paths="kde_have_all_paths=\"yes\" \ + kde_htmldir=\"$kde_htmldir\" \ + kde_appsdir=\"$kde_appsdir\" \ + kde_icondir=\"$kde_icondir\" \ + kde_sounddir=\"$kde_sounddir\" \ + kde_datadir=\"$kde_datadir\" \ + kde_locale=\"$kde_locale\" \ + kde_cgidir=\"$kde_cgidir\" \ + kde_confdir=\"$kde_confdir\" \ + kde_kcfgdir=\"$kde_kcfgdir\" \ + kde_mimedir=\"$kde_mimedir\" \ + kde_toolbardir=\"$kde_toolbardir\" \ + kde_wallpaperdir=\"$kde_wallpaperdir\" \ + kde_templatesdir=\"$kde_templatesdir\" \ + kde_bindir=\"$kde_bindir\" \ + kde_servicesdir=\"$kde_servicesdir\" \ + kde_servicetypesdir=\"$kde_servicetypesdir\" \ + kde_moduledir=\"$kde_moduledir\" \ + kde_styledir=\"$kde_styledir\" \ + kde_widgetdir=\"$kde_widgetdir\" \ + xdg_appsdir=\"$xdg_appsdir\" \ + xdg_menudir=\"$xdg_menudir\" \ + xdg_directorydir=\"$xdg_directorydir\" \ + kde_result=$1" +]) + +AC_DEFUN([KDE_SET_DEFAULT_PATHS], +[ +if test "$1" = "default"; then + + if test -z "$kde_htmldir"; then + kde_htmldir='\${datadir}/doc/HTML' + fi + if test -z "$kde_appsdir"; then + kde_appsdir='\${datadir}/applnk' + fi + if test -z "$kde_icondir"; then + kde_icondir='\${datadir}/icons' + fi + if test -z "$kde_sounddir"; then + kde_sounddir='\${datadir}/sounds' + fi + if test -z "$kde_datadir"; then + kde_datadir='\${datadir}/apps' + fi + if test -z "$kde_locale"; then + kde_locale='\${datadir}/locale' + fi + if test -z "$kde_cgidir"; then + kde_cgidir='\${exec_prefix}/cgi-bin' + fi + if test -z "$kde_confdir"; then + kde_confdir='\${datadir}/config' + fi + if test -z "$kde_kcfgdir"; then + kde_kcfgdir='\${datadir}/config.kcfg' + fi + if test -z "$kde_mimedir"; then + kde_mimedir='\${datadir}/mimelnk' + fi + if test -z "$kde_toolbardir"; then + kde_toolbardir='\${datadir}/toolbar' + fi + if test -z "$kde_wallpaperdir"; then + kde_wallpaperdir='\${datadir}/wallpapers' + fi + if test -z "$kde_templatesdir"; then + kde_templatesdir='\${datadir}/templates' + fi + if test -z "$kde_bindir"; then + kde_bindir='\${exec_prefix}/bin' + fi + if test -z "$kde_servicesdir"; then + kde_servicesdir='\${datadir}/services' + fi + if test -z "$kde_servicetypesdir"; then + kde_servicetypesdir='\${datadir}/servicetypes' + fi + if test -z "$kde_moduledir"; then + if test "$kde_qtver" = "2"; then + kde_moduledir='\${libdir}/kde2' + else + kde_moduledir='\${libdir}/kde3' + fi + fi + if test -z "$kde_styledir"; then + kde_styledir='\${libdir}/kde3/plugins/styles' + fi + if test -z "$kde_widgetdir"; then + kde_widgetdir='\${libdir}/kde3/plugins/designer' + fi + if test -z "$xdg_appsdir"; then + xdg_appsdir='\${datadir}/applications/kde' + fi + if test -z "$xdg_menudir"; then + xdg_menudir='\${sysconfdir}/xdg/menus' + fi + if test -z "$xdg_directorydir"; then + xdg_directorydir='\${datadir}/desktop-directories' + fi + + KDE_SET_PATHS(defaults) + +else + + if test $kde_qtver = 1; then + AC_MSG_RESULT([compiling]) + KDE_1_CHECK_PATHS + else + AC_MSG_ERROR([path checking not yet supported for KDE 2]) + fi + +fi +]) + +AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], +[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || + test -z "$kde_icondir" || test -z "$kde_sounddir" || + test -z "$kde_datadir" || test -z "$kde_locale" || + test -z "$kde_cgidir" || test -z "$kde_confdir" || + test -z "$kde_kcfgdir" || + test -z "$kde_mimedir" || test -z "$kde_toolbardir" || + test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || + test -z "$kde_bindir" || test -z "$kde_servicesdir" || + test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || + test -z "$kde_styledir" || test -z "kde_widgetdir" || + test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || + test "x$kde_have_all_paths" != "xyes"; then + kde_have_all_paths=no + fi +]) + +AC_DEFUN([KDE_MISSING_PROG_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed KDE correctly. +]) +]) + +AC_DEFUN([KDE_MISSING_ARTS_ERROR], +[ + AC_MSG_ERROR([The important program $1 was not found! +Please check whether you installed aRts correctly or use +--without-arts to compile without aRts support (this will remove functionality). +]) +]) + +AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], +[ + kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" + test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" + if test -n "$KDEDIRS"; then + kde_save_IFS=$IFS + IFS=: + for dir in $KDEDIRS; do + kde_default_bindirs="$dir/bin $kde_default_bindirs " + done + IFS=$kde_save_IFS + fi +]) + +AC_DEFUN([KDE_SUBST_PROGRAMS], +[ + AC_ARG_WITH(arts, + AC_HELP_STRING([--without-arts],[build without aRts [default=yes]]), + [build_arts=$withval], + [build_arts=yes] + ) + AM_CONDITIONAL(include_ARTS, test "$build_arts" != "no") + + KDE_SET_DEFAULT_BINDIRS + kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" + KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) + KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) + if test "$build_arts" != "no"; then + KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) + KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) + fi + KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) + + kde32ornewer=1 + if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then + kde32ornewer= + else + if test "$kde_qtver" = "3" && test "$kde_qtsubver" -le 1; then + kde32ornewer= + fi + fi + + if test -n "$kde32ornewer"; then + KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) + KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) + fi + KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin /usr/local/bin /opt/local/bin], [XMLLINT=""]) + + if test -n "$MEINPROC" && test ! "$MEINPROC" = "compiled"; then + kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" + test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" + AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) + if test "$KDE_XSL_STYLESHEET" = "NO"; then + KDE_XSL_STYLESHEET="" + else + KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" + fi + fi + + DCOP_DEPENDENCIES='$(DCOPIDL)' + if test -n "$kde32ornewer"; then + KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' + DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' + AC_SUBST(KCONFIG_COMPILER) + AC_SUBST(KCFG_DEPENDENCIES) + AC_SUBST(DCOPIDLNG) + fi + AC_SUBST(DCOPIDL) + AC_SUBST(DCOPIDL2CPP) + AC_SUBST(DCOP_DEPENDENCIES) + AC_SUBST(MCOPIDL) + AC_SUBST(ARTSCCONFIG) + AC_SUBST(MEINPROC) + AC_SUBST(KDE_XSL_STYLESHEET) + AC_SUBST(XMLLINT) +])dnl + +AC_DEFUN([AC_CREATE_KFSSTND], +[ +AC_REQUIRE([AC_CHECK_RPATH]) + +AC_MSG_CHECKING([for KDE paths]) +kde_result="" +kde_cached_paths=yes +AC_CACHE_VAL(kde_cv_all_paths, +[ + KDE_SET_DEFAULT_PATHS($1) + kde_cached_paths=no +]) +eval "$kde_cv_all_paths" +KDE_CHECK_PATHS_FOR_COMPLETENESS +if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then + # wrong values were cached, may be, we can set better ones + kde_result= + kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= + kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= + kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= + kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= + kde_have_all_paths= + kde_styledir= + kde_widgetdir= + xdg_appsdir = xdg_menudir= xdg_directorydir= + KDE_SET_DEFAULT_PATHS($1) + eval "$kde_cv_all_paths" + KDE_CHECK_PATHS_FOR_COMPLETENESS + kde_result="$kde_result (cache overridden)" +fi +if test "$kde_have_all_paths" = "no"; then + AC_MSG_ERROR([configure could not run a little KDE program to test the environment. +Since it had compiled and linked before, it must be a strange problem on your system. +Look at config.log for details. If you are not able to fix this, look at +http://www.kde.org/faq/installation.html or any www.kde.org mirror. +(If you're using an egcs version on Linux, you may update binutils!) +]) +else + rm -f conftest* + AC_MSG_RESULT($kde_result) +fi + +bindir=$kde_bindir + +KDE_SUBST_PROGRAMS + +]) + +AC_DEFUN([AC_SUBST_KFSSTND], +[ +AC_SUBST(kde_htmldir) +AC_SUBST(kde_appsdir) +AC_SUBST(kde_icondir) +AC_SUBST(kde_sounddir) +AC_SUBST(kde_datadir) +AC_SUBST(kde_locale) +AC_SUBST(kde_confdir) +AC_SUBST(kde_kcfgdir) +AC_SUBST(kde_mimedir) +AC_SUBST(kde_wallpaperdir) +AC_SUBST(kde_bindir) +dnl X Desktop Group standards +AC_SUBST(xdg_appsdir) +AC_SUBST(xdg_menudir) +AC_SUBST(xdg_directorydir) +dnl for KDE 2 +AC_SUBST(kde_templatesdir) +AC_SUBST(kde_servicesdir) +AC_SUBST(kde_servicetypesdir) +AC_SUBST(kde_moduledir) +AC_SUBST(kdeinitdir, '$(kde_moduledir)') +AC_SUBST(kde_styledir) +AC_SUBST(kde_widgetdir) +if test "$kde_qtver" = 1; then + kde_minidir="$kde_icondir/mini" +else +# for KDE 1 - this breaks KDE2 apps using minidir, but +# that's the plan ;-/ + kde_minidir="/dev/null" +fi +dnl AC_SUBST(kde_minidir) +dnl AC_SUBST(kde_cgidir) +dnl AC_SUBST(kde_toolbardir) +]) + +AC_DEFUN([KDE_MISC_TESTS], +[ + dnl Checks for libraries. + AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD + AC_SUBST(LIBUTIL) + AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD + AC_SUBST(LIBCOMPAT) + kde_have_crypt= + AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], + AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ + AC_MSG_WARN([you have no crypt in either libcrypt or libc. +You should install libcrypt from another source or configure with PAM +support]) + kde_have_crypt=no + ])) + AC_SUBST(LIBCRYPT) + if test $kde_have_crypt = yes; then + AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) + fi + AC_CHECK_SOCKLEN_T + AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) + if test $ac_cv_lib_dnet_dnet_ntoa = no; then + AC_CHECK_LIB(dnet_stub, dnet_ntoa, + [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) + fi + AC_CHECK_FUNC(inet_ntoa) + if test $ac_cv_func_inet_ntoa = no; then + AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") + fi + AC_CHECK_FUNC(connect) + if test $ac_cv_func_connect = no; then + AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , + $X_EXTRA_LIBS) + fi + + AC_CHECK_FUNC(remove) + if test $ac_cv_func_remove = no; then + AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") + fi + + # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. + AC_CHECK_FUNC(shmat, , + AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) + + # more headers that need to be explicitly included on darwin + AC_CHECK_HEADERS(sys/types.h stdint.h) + + # sys/bitypes.h is needed for uint32_t and friends on Tru64 + AC_CHECK_HEADERS(sys/bitypes.h) + + # darwin requires a poll emulation library + AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") + + # CoreAudio framework + AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ + AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) + FRAMEWORK_COREAUDIO="-Xlinker -framework -Xlinker CoreAudio" + ]) + + AC_CHECK_RES_INIT + AC_SUBST(LIB_POLL) + AC_SUBST(FRAMEWORK_COREAUDIO) + LIBSOCKET="$X_EXTRA_LIBS" + AC_SUBST(LIBSOCKET) + AC_SUBST(X_EXTRA_LIBS) + AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 + AC_SUBST(LIBUCB) + + case $host in dnl this *is* LynxOS specific + *-*-lynxos* ) + AC_MSG_CHECKING([LynxOS header file wrappers]) + [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] + AC_MSG_RESULT(disabled) + AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS + ;; + esac + + KDE_CHECK_TYPES + KDE_CHECK_LIBDL + KDE_CHECK_STRLCPY + +# darwin needs this to initialize the environment +AC_CHECK_HEADERS(crt_externs.h) +AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) + +AH_VERBATIM(_DARWIN_ENVIRON, +[ +#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) +# include +# include +# define environ (*_NSGetEnviron()) +#endif +]) + +AH_VERBATIM(_AIX_STRINGS_H_BZERO, +[ +/* + * AIX defines FD_SET in terms of bzero, but fails to include + * that defines bzero. + */ + +#if defined(_AIX) +#include +#endif +]) + +AC_CHECK_FUNCS([vsnprintf snprintf]) + +AH_VERBATIM(_TRU64,[ +/* + * On HP-UX, the declaration of vsnprintf() is needed every time ! + */ + +#if !defined(HAVE_VSNPRINTF) || defined(hpux) +#if __STDC__ +#include +#include +#else +#include +#endif +#ifdef __cplusplus +extern "C" +#endif +int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); +#ifdef __cplusplus +extern "C" +#endif +int snprintf(char *str, size_t n, char const *fmt, ...); +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Find the header files and libraries for X-Windows. Extended the +dnl macro AC_PATH_X +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([K_PATH_X], +[ +AC_REQUIRE([KDE_MISC_TESTS])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_ARG_ENABLE( + embedded, + AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), + kde_use_qt_emb=$enableval, + kde_use_qt_emb=no +) + +AC_ARG_ENABLE( + qtopia, + AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), + kde_use_qt_emb_palm=$enableval, + kde_use_qt_emb_palm=no +) + +AC_ARG_ENABLE( + mac, + AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), + kde_use_qt_mac=$enableval, + kde_use_qt_mac=no +) + +if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then + +AC_MSG_CHECKING(for X) + +AC_CACHE_VAL(kde_cv_have_x, +[# One or both of the vars are not set, and there is no cached value. +if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then + kde_x_includes=NO +else + kde_x_includes=$x_includes +fi +if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then + kde_x_libraries=NO +else + kde_x_libraries=$x_libraries +fi + +# below we use the standard autoconf calls +ac_x_libraries=$kde_x_libraries +ac_x_includes=$kde_x_includes + +KDE_PATH_X_DIRECT +dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. +dnl Unfortunately, if compiling with the N32 ABI, this is not the correct +dnl location. The correct location is /usr/lib32 or an undefined value +dnl (the linker is smart enough to pick the correct default library). +dnl Things work just fine if you use just AC_PATH_X_DIRECT. +dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to +dnl /usr/openwin/include, which doesn't work. /usr/include does work, so +dnl x_includes should be left alone. +case "$host" in +mips-sgi-irix6*) + ;; +*-*-solaris*) + ;; +*) + _AC_PATH_X_XMKMF + if test -z "$ac_x_includes"; then + ac_x_includes="." + fi + if test -z "$ac_x_libraries"; then + ac_x_libraries="/usr/lib${kdelibsuff}" + fi +esac +#from now on we use our own again + +# when the user already gave --x-includes, we ignore +# what the standard autoconf macros told us. +if test "$kde_x_includes" = NO; then + kde_x_includes=$ac_x_includes +fi + +# for --x-libraries too +if test "$kde_x_libraries" = NO; then + kde_x_libraries=$ac_x_libraries +fi + +if test "$kde_x_includes" = NO; then + AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) +fi + +if test "$kde_x_libraries" = NO; then + AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) +fi + +# Record where we found X for the cache. +kde_cv_have_x="have_x=yes \ + kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" +])dnl + +eval "$kde_cv_have_x" + +if test "$have_x" != yes; then + AC_MSG_RESULT($have_x) + no_x=yes +else + AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) +fi + +if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then + X_INCLUDES="" + x_includes="."; dnl better than nothing :- + else + x_includes=$kde_x_includes + X_INCLUDES="-I$x_includes" +fi + +if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then + X_LDFLAGS="" + x_libraries="/usr/lib"; dnl better than nothing :- + else + x_libraries=$kde_x_libraries + X_LDFLAGS="-L$x_libraries" +fi +all_includes="$X_INCLUDES" +all_libraries="$X_LDFLAGS" + +# Check for libraries that X11R6 Xt/Xaw programs need. +ac_save_LDFLAGS="$LDFLAGS" +LDFLAGS="$LDFLAGS $X_LDFLAGS" +# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to +# check for ICE first), but we must link in the order -lSM -lICE or +# we get undefined symbols. So assume we have SM if we have ICE. +# These have to be linked with before -lX11, unlike the other +# libraries we check for below, so use a different variable. +# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. +AC_CHECK_LIB(ICE, IceConnectionNumber, + [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) +LDFLAGS="$ac_save_LDFLAGS" + +LIB_X11='-lX11 $(LIBSOCKET)' + +AC_MSG_CHECKING(for libXext) +AC_CACHE_VAL(kde_cv_have_libXext, +[ +kde_ldflags_safe="$LDFLAGS" +kde_libs_safe="$LIBS" + +LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" +LIBS="-lXext -lX11 $LIBSOCKET" + +AC_TRY_LINK([ +#include +#ifdef STDC_HEADERS +# include +#endif +], +[ +printf("hello Xext\n"); +], +kde_cv_have_libXext=yes, +kde_cv_have_libXext=no +) + +LDFLAGS=$kde_ldflags_safe +LIBS=$kde_libs_safe +]) + +AC_MSG_RESULT($kde_cv_have_libXext) + +if test "$kde_cv_have_libXext" = "no"; then + AC_MSG_ERROR([We need a working libXext to proceed. Since configure +can't find it itself, we stop here assuming that make wouldn't find +them either.]) +fi + +LIB_XEXT="-lXext" +QTE_NORTTI="" + +elif test "$kde_use_qt_emb" = "yes"; then + dnl We're using QT Embedded + CPPFLAGS=-DQWS + CXXFLAGS="$CXXFLAGS -fno-rtti" + QTE_NORTTI="-fno-rtti -DQWS" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +elif test "$kde_use_qt_mac" = "yes"; then + dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to + dnl be included to get the information) --Sam + CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" + CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" + X_PRE_LIBS="" + LIB_X11="" + LIB_XEXT="" + LIB_XRENDER="" + LIBSM="" + X_INCLUDES="" + X_LDFLAGS="" + x_includes="" + x_libraries="" +fi +AC_SUBST(X_PRE_LIBS) +AC_SUBST(LIB_X11) +AC_SUBST(LIB_XRENDER) +AC_SUBST(LIBSM) +AC_SUBST(X_INCLUDES) +AC_SUBST(X_LDFLAGS) +AC_SUBST(x_includes) +AC_SUBST(x_libraries) +AC_SUBST(QTE_NORTTI) +AC_SUBST(LIB_XEXT) + +]) + +AC_DEFUN([KDE_PRINT_QT_PROGRAM], +[ +AC_REQUIRE([KDE_USE_QT]) +cat > conftest.$ac_ext < +#include +EOF +if test "$kde_qtver" = "2"; then +cat >> conftest.$ac_ext < +#include +#include +EOF + +if test $kde_qtsubver -gt 0; then +cat >> conftest.$ac_ext <> conftest.$ac_ext < +#include +#include +EOF +fi + +echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext +cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC +fi + +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" +export LD_LIBRARY_PATH +LIBRARY_PATH="$ac_LIBRARY_PATH" +export LIBRARY_PATH +AC_LANG_RESTORE +]) + +if test "$kde_cv_qt_direct" = "yes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the Qt headers and libraries. +dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) +dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_PATH_QT_1_3], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([KDE_USE_QT]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +dnl ------------------------------------------------------------------------ +dnl Add configure flag to enable linking to MT version of Qt library. +dnl ------------------------------------------------------------------------ + +AC_ARG_ENABLE( + mt, + AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), + kde_use_qt_mt=$enableval, + [ + if test $kde_qtver = 3; then + kde_use_qt_mt=yes + else + kde_use_qt_mt=no + fi + ] +) + +USING_QT_MT="" + +dnl ------------------------------------------------------------------------ +dnl If we not get --disable-qt-mt then adjust some vars for the host. +dnl ------------------------------------------------------------------------ + +KDE_MT_LDFLAGS= +KDE_MT_LIBS= +if test "x$kde_use_qt_mt" = "xyes"; then + KDE_CHECK_THREADING + if test "x$kde_use_threading" = "xyes"; then + CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" + KDE_MT_LDFLAGS="$USE_THREADS" + KDE_MT_LIBS="$LIBPTHREAD" + else + kde_use_qt_mt=no + fi +fi +AC_SUBST(KDE_MT_LDFLAGS) +AC_SUBST(KDE_MT_LIBS) + +kde_qt_was_given=yes + +dnl ------------------------------------------------------------------------ +dnl If we haven't been told how to link to Qt, we work it out for ourselves. +dnl ------------------------------------------------------------------------ +if test -z "$LIBQT_GLOB"; then + if test "x$kde_use_qt_emb" = "xyes"; then + LIBQT_GLOB="libqte.*" + else + LIBQT_GLOB="libqt.*" + fi +fi + +if test -z "$LIBQT"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-embedded then adjust the Qt library name. +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + qtlib="qte" + else + qtlib="qt" + fi + + kde_int_qt="-l$qtlib" +else + kde_int_qt="$LIBQT" + kde_lib_qt_set=yes +fi + +if test -z "$LIBQPE"; then +dnl ------------------------------------------------------------ +dnl If we got --enable-palmtop then add -lqpe to the link line +dnl ------------------------------------------------------------ + if test "x$kde_use_qt_emb" = "xyes"; then + if test "x$kde_use_qt_emb_palm" = "xyes"; then + LIB_QPE="-lqpe" + else + LIB_QPE="" + fi + else + LIB_QPE="" + fi +fi + +dnl ------------------------------------------------------------------------ +dnl If we got --enable-qt-mt then adjust the Qt library name for the host. +dnl ------------------------------------------------------------------------ + +if test "x$kde_use_qt_mt" = "xyes"; then + if test -z "$LIBQT"; then + LIBQT="-l$qtlib-mt" + kde_int_qt="-l$qtlib-mt" + else + LIBQT="$qtlib-mt" + kde_int_qt="$qtlib-mt" + fi + LIBQT_GLOB="lib$qtlib-mt.*" + USING_QT_MT="using -mt" +else + LIBQT="-l$qtlib" +fi + +if test $kde_qtver != 1; then + + AC_REQUIRE([AC_FIND_PNG]) + AC_REQUIRE([AC_FIND_JPEG]) + LIBQT="$LIBQT $LIBPNG $LIBJPEG" +fi + +if test $kde_qtver = 3; then + AC_REQUIRE([KDE_CHECK_LIBDL]) + LIBQT="$LIBQT $LIBDL" +fi + +AC_MSG_CHECKING([for Qt]) + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" +fi +ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO +qt_libraries="" +qt_includes="" +AC_ARG_WITH(qt-dir, + AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), + [ ac_qt_includes="$withval"/include + ac_qt_libraries="$withval"/lib${kdelibsuff} + ac_qt_bindir="$withval"/bin + ]) + +AC_ARG_WITH(qt-includes, + AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), + [ + ac_qt_includes="$withval" + ]) + +kde_qt_libs_given=no + +AC_ARG_WITH(qt-libraries, + AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), + [ ac_qt_libraries="$withval" + kde_qt_libs_given=yes + ]) + +AC_CACHE_VAL(ac_cv_have_qt, +[#try to guess Qt locations + +qt_incdirs="" +for dir in $kde_qt_dirs; do + qt_incdirs="$qt_incdirs $dir/include $dir" +done +qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" +if test ! "$ac_qt_includes" = "NO"; then + qt_incdirs="$ac_qt_includes $qt_incdirs" +fi + +if test "$kde_qtver" != "1"; then + kde_qt_header=qstyle.h +else + kde_qt_header=qglobal.h +fi + +AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) +ac_qt_includes="$qt_incdir" + +qt_libdirs="" +for dir in $kde_qt_dirs; do + qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" +done +qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" +if test ! "$ac_qt_libraries" = "NO"; then + qt_libdir=$ac_qt_libraries +else + qt_libdirs="$ac_qt_libraries $qt_libdirs" + # if the Qt was given, the chance is too big that libqt.* doesn't exist + qt_libdir=NONE + for dir in $qt_libdirs; do + try="ls -1 $dir/${LIBQT_GLOB}" + if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done +fi +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIBQT="$LIBQT ${kde_int_qt}_incremental" + break + fi +done + +ac_qt_libraries="$qt_libdir" + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + +ac_cxxflags_safe="$CXXFLAGS" +ac_ldflags_safe="$LDFLAGS" +ac_libs_safe="$LIBS" + +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" +LIBS="$LIBS $LIBQT $KDE_MT_LIBS" + +KDE_PRINT_QT_PROGRAM + +if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&AC_FD_CC + ac_qt_libraries="NO" +fi +rm -f conftest* +CXXFLAGS="$ac_cxxflags_safe" +LDFLAGS="$ac_ldflags_safe" +LIBS="$ac_libs_safe" + +AC_LANG_RESTORE +if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then + ac_cv_have_qt="have_qt=no" + ac_qt_notfound="" + missing_qt_mt="" + if test "$ac_qt_includes" = NO; then + if test "$ac_qt_libraries" = NO; then + ac_qt_notfound="(headers and libraries)"; + else + ac_qt_notfound="(headers)"; + fi + else + if test "x$kde_use_qt_mt" = "xyes"; then + missing_qt_mt=" +Make sure that you have compiled Qt with thread support!" + ac_qt_notfound="(library $qtlib-mt)"; + else + ac_qt_notfound="(library $qtlib)"; + fi + fi + + AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! +For more details about this problem, look at the end of config.log.$missing_qt_mt]) +else + have_qt="yes" +fi +]) + +eval "$ac_cv_have_qt" + +if test "$have_qt" != yes; then + AC_MSG_RESULT([$have_qt]); +else + ac_cv_have_qt="have_qt=yes \ + ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" + AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) + + qt_libraries="$ac_qt_libraries" + qt_includes="$ac_qt_includes" +fi + +if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then + KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) +fi + +AC_SUBST(qt_libraries) +AC_SUBST(qt_includes) + +if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then + QT_INCLUDES="" +else + QT_INCLUDES="-I$qt_includes" + all_includes="$QT_INCLUDES $all_includes" +fi + +if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then + QT_LDFLAGS="" +else + QT_LDFLAGS="-L$qt_libraries" + all_libraries="$all_libraries $QT_LDFLAGS" +fi +test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" + +AC_SUBST(QT_INCLUDES) +AC_SUBST(QT_LDFLAGS) +AC_PATH_QT_MOC_UIC + +KDE_CHECK_QT_JPEG + +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' +else +LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' +fi +test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" +for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do + if test -e "$a"; then + LIB_QT="$LIB_QT ${kde_int_qt}_incremental" + break + fi +done + +AC_SUBST(LIB_QT) +AC_SUBST(LIB_QPE) + +AC_SUBST(kde_qtver) +]) + +AC_DEFUN([AC_PATH_QT], +[ +AC_PATH_QT_1_3 +]) + +AC_DEFUN([KDE_CHECK_UIC_PLUGINS], +[ +AC_REQUIRE([AC_PATH_QT_MOC_UIC]) + +if test x$ac_uic_supports_libpath = xyes; then + +AC_MSG_CHECKING([if UIC has KDE plugins available]) +AC_CACHE_VAL(kde_cv_uic_plugins, +[ +cat > actest.ui << EOF + +NewConnectionDialog + + + + testInput + + + + +EOF + + + +kde_cv_uic_plugins=no +kde_line="$UIC_PATH -L $kde_widgetdir" +if test x$ac_uic_supports_nounload = xyes; then + kde_line="$kde_line -nounload" +fi +kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" +if AC_TRY_EVAL(kde_line); then + # if you're trying to debug this check and think it's incorrect, + # better check your installation. The check _is_ correct - your + # installation is not. + if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then + kde_cv_uic_plugins=yes + fi +fi +rm -f actest.ui actest.cpp +]) + +AC_MSG_RESULT([$kde_cv_uic_plugins]) +if test "$kde_cv_uic_plugins" != yes; then + AC_MSG_ERROR([you need to install kdelibs first.]) +fi +fi +]) + +AC_DEFUN([KDE_CHECK_FINAL], +[ + AC_ARG_ENABLE(final, + AC_HELP_STRING([--enable-final], + [build size optimized apps (experimental - needs lots of memory)]), + kde_use_final=$enableval, kde_use_final=no) + + if test "x$kde_use_final" = "xyes"; then + KDE_USE_FINAL_TRUE="" + KDE_USE_FINAL_FALSE="#" + else + KDE_USE_FINAL_TRUE="#" + KDE_USE_FINAL_FALSE="" + fi + AC_SUBST(KDE_USE_FINAL_TRUE) + AC_SUBST(KDE_USE_FINAL_FALSE) +]) + +AC_DEFUN([KDE_CHECK_CLOSURE], +[ + AC_ARG_ENABLE(closure, + AC_HELP_STRING([--enable-closure],[delay template instantiation]), + kde_use_closure=$enableval, kde_use_closure=no) + + KDE_NO_UNDEFINED="" + if test "x$kde_use_closure" = "xyes"; then + KDE_USE_CLOSURE_TRUE="" + KDE_USE_CLOSURE_FALSE="#" +# CXXFLAGS="$CXXFLAGS $REPO" + else + KDE_USE_CLOSURE_TRUE="#" + KDE_USE_CLOSURE_FALSE="" + KDE_NO_UNDEFINED="" + case $host in + *-*-linux-gnu) + KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], + [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], + [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], + [KDE_NO_UNDEFINED=""])], + [KDE_NO_UNDEFINED=""]) + ;; + esac + fi + AC_SUBST(KDE_USE_CLOSURE_TRUE) + AC_SUBST(KDE_USE_CLOSURE_FALSE) + AC_SUBST(KDE_NO_UNDEFINED) +]) + +AC_DEFUN([KDE_CHECK_NMCHECK], +[ + AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), + kde_use_nmcheck=$enableval, kde_use_nmcheck=no) + + if test "$kde_use_nmcheck" = "yes"; then + KDE_USE_NMCHECK_TRUE="" + KDE_USE_NMCHECK_FALSE="#" + else + KDE_USE_NMCHECK_TRUE="#" + KDE_USE_NMCHECK_FALSE="" + fi + AC_SUBST(KDE_USE_NMCHECK_TRUE) + AC_SUBST(KDE_USE_NMCHECK_FALSE) +]) + +AC_DEFUN([KDE_EXPAND_MAKEVAR], [ +savex=$exec_prefix +test "x$exec_prefix" = xNONE && exec_prefix=$prefix +tmp=$$2 +while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done +exec_prefix=$savex +]) + +dnl ------------------------------------------------------------------------ +dnl Now, the same with KDE +dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) +dnl and $(kde_includes) will be the kdehdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_BASE_PATH_KDE], +[ +AC_REQUIRE([KDE_CHECK_STL]) +AC_REQUIRE([AC_PATH_QT])dnl +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_CHECK_RPATH +AC_MSG_CHECKING([for KDE]) + +if test "${prefix}" != NONE; then + kde_includes=${includedir} + KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) + + kde_libraries=${libdir} + KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) + +else + ac_kde_includes= + ac_kde_libraries= + kde_libraries="" + kde_includes="" +fi + +AC_CACHE_VAL(ac_cv_have_kde, +[#try to guess kde locations + +if test "$kde_qtver" = 1; then + kde_check_header="ksock.h" + kde_check_lib="libkdecore.la" +else + kde_check_header="ksharedptr.h" + kde_check_lib="libkio.la" +fi + +if test -z "$1"; then + +kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" +test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" +kde_incdirs="$ac_kde_includes $kde_incdirs" +AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) +ac_kde_includes="$kde_incdir" + +if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then + AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE headers installed. This will fail. +So, check this please and use another prefix!]) +fi + +kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" +test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" +kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" +AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) +ac_kde_libraries="$kde_libdir" + +kde_widgetdir=NO +dnl this might be somewhere else +AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) + +if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then +AC_MSG_ERROR([ +in the prefix, you've chosen, are no KDE libraries installed. This will fail. +So, check this please and use another prefix!]) +fi + +if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then +AC_MSG_ERROR([ +I can't find the designer plugins. These are required and should have been installed +by kdelibs]) +fi + +if test -n "$kde_widgetdir"; then + kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" +fi + + +if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then + ac_cv_have_kde="have_kde=no" +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" +fi + +else dnl test -z $1, e.g. from kdelibs + + ac_cv_have_kde="have_kde=no" + +fi +])dnl + +eval "$ac_cv_have_kde" + +if test "$have_kde" != "yes"; then + if test "${prefix}" = NONE; then + ac_kde_prefix="$ac_default_prefix" + else + ac_kde_prefix="$prefix" + fi + if test "$exec_prefix" = NONE; then + ac_kde_exec_prefix="$ac_kde_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix]) + else + ac_kde_exec_prefix="$exec_prefix" + AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) + fi + + kde_libraries="${libdir}" + kde_includes="${includedir}" + +else + ac_cv_have_kde="have_kde=yes \ + ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" + AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) + + kde_libraries="$ac_kde_libraries" + kde_includes="$ac_kde_includes" +fi +AC_SUBST(kde_libraries) +AC_SUBST(kde_includes) + +if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then + KDE_INCLUDES="" +else + KDE_INCLUDES="-I$kde_includes" + all_includes="$KDE_INCLUDES $all_includes" +fi + +KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" + +KDE_LDFLAGS="-L$kde_libraries" +if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then + all_libraries="$all_libraries $KDE_LDFLAGS" +fi + +AC_SUBST(KDE_LDFLAGS) +AC_SUBST(KDE_INCLUDES) + +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +all_libraries="$all_libraries $USER_LDFLAGS" +all_includes="$all_includes $USER_INCLUDES" +AC_SUBST(all_includes) +AC_SUBST(all_libraries) + +if test -z "$1"; then +KDE_CHECK_UIC_PLUGINS +fi + +ac_kde_libraries="$kde_libdir" + +AC_SUBST(AUTODIRS) + + +]) + +AC_DEFUN([KDE_CHECK_EXTRA_LIBS], +[ +AC_MSG_CHECKING(for extra includes) +AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), + kde_use_extra_includes="$withval", + kde_use_extra_includes=NONE +) +kde_extra_includes= +if test -n "$kde_use_extra_includes" && \ + test "$kde_use_extra_includes" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_includes; do + kde_extra_includes="$kde_extra_includes $dir" + USER_INCLUDES="$USER_INCLUDES -I$dir" + done + IFS=$ac_save_ifs + kde_use_extra_includes="added" +else + kde_use_extra_includes="no" +fi +AC_SUBST(USER_INCLUDES) + +AC_MSG_RESULT($kde_use_extra_includes) + +kde_extra_libs= +AC_MSG_CHECKING(for extra libs) +AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), + kde_use_extra_libs=$withval, + kde_use_extra_libs=NONE +) +if test -n "$kde_use_extra_libs" && \ + test "$kde_use_extra_libs" != "NONE"; then + + ac_save_ifs=$IFS + IFS=':' + for dir in $kde_use_extra_libs; do + kde_extra_libs="$kde_extra_libs $dir" + KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" + USER_LDFLAGS="$USER_LDFLAGS -L$dir" + done + IFS=$ac_save_ifs + kde_use_extra_libs="added" +else + kde_use_extra_libs="no" +fi + +AC_SUBST(USER_LDFLAGS) + +AC_MSG_RESULT($kde_use_extra_libs) + +]) + +AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], +[ + AC_MSG_CHECKING([for KDE headers installed]) + AC_LANG_SAVE + AC_LANG_CPLUSPLUS +cat > conftest.$ac_ext < +#endif +#include +#include "confdefs.h" +#include + +int main() { + printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); + printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); + printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); + printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); + printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); + printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); + printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); + printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); + printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); + printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); + printf("kde_wallpaperdir=\\"%s\\"\n", + KApplication::kde_wallpaperdir().data()); + printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); + printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); + printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); + printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); + printf("kde_moduledir=\\"/tmp/dummy\\"\n"); + printf("kde_styledir=\\"/tmp/dummy\\"\n"); + printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); + printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); + printf("xdg_menudir=\\"/tmp/dummy\\"\n"); + printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); + printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); + return 0; + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$all_includes $CPPFLAGS" + if AC_TRY_EVAL(ac_compile); then + AC_MSG_RESULT(yes) + else + AC_MSG_ERROR([your system is not able to compile a small KDE application! +Check, if you installed the KDE header files correctly. +For more details about this problem, look at the end of config.log.]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_KDEQTADDON], +[ +AC_MSG_CHECKING(for kde-qt-addon) +AC_CACHE_VAL(kde_cv_have_kdeqtaddon, +[ + kde_ldflags_safe="$LDFLAGS" + kde_libs_safe="$LIBS" + kde_cxxflags_safe="$CXXFLAGS" + + LIBS="-lkde-qt-addon $LIBQT $LIBS" + CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" + LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" + + AC_TRY_LINK([ + #include + ], + [ + QDomDocument doc; + ], + kde_cv_have_kdeqtaddon=yes, + kde_cv_have_kdeqtaddon=no + ) + + LDFLAGS=$kde_ldflags_safe + LIBS=$kde_libs_safe + CXXFLAGS=$kde_cxxflags_safe +]) + +AC_MSG_RESULT($kde_cv_have_kdeqtaddon) + +if test "$kde_cv_have_kdeqtaddon" = "no"; then + AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. +It is a separate package (and CVS module) named kde-qt-addon.]) +fi +]) + +AC_DEFUN([KDE_CREATE_LIBS_ALIASES], +[ + AC_REQUIRE([KDE_MISC_TESTS]) + AC_REQUIRE([KDE_CHECK_LIBDL]) + AC_REQUIRE([K_PATH_X]) + +if test $kde_qtver = 3; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KABC, "-lkabc") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") + AC_SUBST(LIB_KUTILS, "-lkutils") + AC_SUBST(LIB_KDEPIM, "-lkdepim") +# these are for backward compatibility + AC_SUBST(LIB_KSYCOCA, "-lkio") + AC_SUBST(LIB_KFILE, "-lkio") +elif test $kde_qtver = 2; then + AC_SUBST(LIB_KDECORE, "-lkdecore") + AC_SUBST(LIB_KDEUI, "-lkdeui") + AC_SUBST(LIB_KIO, "-lkio") + AC_SUBST(LIB_KSYCOCA, "-lksycoca") + AC_SUBST(LIB_SMB, "-lsmb") + AC_SUBST(LIB_KFILE, "-lkfile") + AC_SUBST(LIB_KAB, "-lkab") + AC_SUBST(LIB_KHTML, "-lkhtml") + AC_SUBST(LIB_KSPELL, "-lkspell") + AC_SUBST(LIB_KPARTS, "-lkparts") + AC_SUBST(LIB_KDEPRINT, "-lkdeprint") +else + AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") + AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") + AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") + AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") + AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") +fi +]) + +AC_DEFUN([AC_PATH_KDE], +[ + AC_BASE_PATH_KDE + AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), + [ + if test "$enableval" = "no"; + then ac_use_path_checking="default" + else ac_use_path_checking="" + fi + ], + [ + if test "$kde_qtver" = 1; + then ac_use_path_checking="" + else ac_use_path_checking="default" + fi + ] + ) + + AC_CREATE_KFSSTND($ac_use_path_checking) + + AC_SUBST_KFSSTND + KDE_CREATE_LIBS_ALIASES +]) + +dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) +AC_DEFUN([KDE_CHECK_FUNC_EXT], +[ +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(kde_cv_func_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +save_CXXFLAGS="$CXXFLAGS" +kde_safe_LIBS="$LIBS" +LIBS="$LIBS $X_EXTRA_LIBS" +if test "$GXX" = "yes"; then +CXXFLAGS="$CXXFLAGS -pedantic-errors" +fi +AC_TRY_COMPILE([ +$2 +], +[ +$3 +], +kde_cv_func_$1=yes, +kde_cv_func_$1=no) +CXXFLAGS="$save_CXXFLAGS" +LIBS="$kde_safe_LIBS" +AC_LANG_RESTORE +]) + +AC_MSG_RESULT($kde_cv_func_$1) + +AC_MSG_CHECKING([if $1 needs custom prototype]) +AC_CACHE_VAL(kde_cv_proto_$1, +[ +if test "x$kde_cv_func_$1" = xyes; then + kde_cv_proto_$1=no +else + case "$1" in + setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) + kde_cv_proto_$1="yes - in libkdefakes" + ;; + *) + kde_cv_proto_$1=unknown + ;; + esac +fi + +if test "x$kde_cv_proto_$1" = xunknown; then + +AC_LANG_SAVE +AC_LANG_CPLUSPLUS + kde_safe_libs=$LIBS + LIBS="$LIBS $X_EXTRA_LIBS" + AC_TRY_LINK([ +$2 + +extern "C" $4; +], +[ +$3 +], +[ kde_cv_func_$1=yes + kde_cv_proto_$1=yes ], + [kde_cv_proto_$1="$1 unavailable"] +) +LIBS=$kde_safe_libs +AC_LANG_RESTORE +fi +]) +AC_MSG_RESULT($kde_cv_proto_$1) + +if test "x$kde_cv_func_$1" = xyes; then + AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) + $6 +fi +if test "x$kde_cv_proto_$1" = xno; then + AC_DEFINE(HAVE_$5_PROTO, 1, + [Define if you have the $1 prototype]) +fi + +AH_VERBATIM([_HAVE_$5_PROTO], +[ +#if !defined(HAVE_$5_PROTO) +#ifdef __cplusplus +extern "C" { +#endif +$4; +#ifdef __cplusplus +} +#endif +#endif +]) +]) + +AC_DEFUN([AC_CHECK_SETENV], +[ + KDE_CHECK_FUNC_EXT(setenv, [ +#include +], + [setenv("VAR", "VALUE", 1);], + [int setenv (const char *, const char *, int)], + [SETENV]) +]) + +AC_DEFUN([AC_CHECK_UNSETENV], +[ + KDE_CHECK_FUNC_EXT(unsetenv, [ +#include +], + [unsetenv("VAR");], + [void unsetenv (const char *)], + [UNSETENV]) +]) + +AC_DEFUN([AC_CHECK_GETDOMAINNAME], +[ + KDE_CHECK_FUNC_EXT(getdomainname, [ +#include +#include +#include +], + [ +char buffer[200]; +getdomainname(buffer, 200); +], + [#include + int getdomainname (char *, size_t)], + [GETDOMAINNAME]) +]) + +AC_DEFUN([AC_CHECK_GETHOSTNAME], +[ + KDE_CHECK_FUNC_EXT(gethostname, [ +#include +#include +], + [ +char buffer[200]; +gethostname(buffer, 200); +], + [int gethostname (char *, unsigned int)], + [GETHOSTNAME]) +]) + +AC_DEFUN([AC_CHECK_USLEEP], +[ + KDE_CHECK_FUNC_EXT(usleep, [ +#include +], + [ +usleep(200); +], + [int usleep (unsigned int)], + [USLEEP]) +]) + + +AC_DEFUN([AC_CHECK_RANDOM], +[ + KDE_CHECK_FUNC_EXT(random, [ +#include +], + [ +random(); +], + [long int random(void)], + [RANDOM]) + + KDE_CHECK_FUNC_EXT(srandom, [ +#include +], + [ +srandom(27); +], + [void srandom(unsigned int)], + [SRANDOM]) + +]) + +AC_DEFUN([AC_CHECK_INITGROUPS], +[ + KDE_CHECK_FUNC_EXT(initgroups, [ +#include +#include +#include +], + [ +char buffer[200]; +initgroups(buffer, 27); +], + [int initgroups(const char *, gid_t)], + [INITGROUPS]) +]) + +AC_DEFUN([AC_CHECK_MKSTEMPS], +[ + KDE_CHECK_FUNC_EXT(mkstemps, [ +#include +#include +], + [ +mkstemps("/tmp/aaaXXXXXX", 6); +], + [int mkstemps(char *, int)], + [MKSTEMPS]) +]) + +AC_DEFUN([AC_CHECK_MKDTEMP], +[ + KDE_CHECK_FUNC_EXT(mkdtemp, [ +#include +#include +], + [ +mkdtemp("/tmp/aaaXXXXXX"); +], + [char *mkdtemp(char *)], + [MKDTEMP]) +]) + + +AC_DEFUN([AC_CHECK_RES_INIT], +[ + AC_MSG_CHECKING([if res_init needs -lresolv]) + kde_libs_safe="$LIBS" + LIBS="$LIBS $X_EXTRA_LIBS -lresolv" + AC_TRY_LINK( + [ +#include +#include +#include +#include + ], + [ + res_init(); + ], + [ + LIBRESOLV="-lresolv" + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) + LIBS=$kde_libs_safe + AC_SUBST(LIBRESOLV) + + AC_MSG_CHECKING([if res_init is available]) + AC_TRY_COMPILE( + [ +#include +#include +#include +#include + ], + [ + res_init(); + ], + [ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) + ], + [ AC_MSG_RESULT(no) ] + ) +]) + +AC_DEFUN([AC_CHECK_STRLCPY], +[ + KDE_CHECK_FUNC_EXT(strlcpy, [ +#include +], +[ char buf[20]; + strlcpy(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcpy(char*, const char*, unsigned long)], + [STRLCPY]) +]) + +AC_DEFUN([AC_CHECK_STRLCAT], +[ + KDE_CHECK_FUNC_EXT(strlcat, [ +#include +], +[ char buf[20]; + buf[0]='\0'; + strlcat(buf, "KDE function test", sizeof(buf)); +], + [unsigned long strlcat(char*, const char*, unsigned long)], + [STRLCAT]) +]) + +AC_DEFUN([AC_FIND_GIF], + [AC_MSG_CHECKING([for giflib]) +AC_CACHE_VAL(ac_cv_lib_gif, +[ac_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" +else +LIBS="$all_libraries -lgif" +fi +AC_TRY_LINK(dnl +[ +#ifdef __cplusplus +extern "C" { +#endif +int GifLastError(void); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [return GifLastError();], + eval "ac_cv_lib_gif=yes", + eval "ac_cv_lib_gif=no") +LIBS="$ac_save_LIBS" +])dnl +if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) +else + AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) +fi +]) + +AC_DEFUN([KDE_FIND_JPEG_HELPER], +[ +AC_MSG_CHECKING([for libjpeg$2]) +AC_CACHE_VAL(ac_cv_lib_jpeg_$1, +[ +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" +ac_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[/* Override any gcc2 internal prototype to avoid an error. */ +struct jpeg_decompress_struct; +typedef struct jpeg_decompress_struct * j_decompress_ptr; +typedef int size_t; +#ifdef __cplusplus +extern "C" { +#endif + void jpeg_CreateDecompress(j_decompress_ptr cinfo, + int version, size_t structsize); +#ifdef __cplusplus +} +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +], + [jpeg_CreateDecompress(0L, 0, 0);], + eval "ac_cv_lib_jpeg_$1=-ljpeg$2", + eval "ac_cv_lib_jpeg_$1=no") +LIBS="$ac_save_LIBS" +CFLAGS="$ac_save_CFLAGS" +]) + +if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then + LIBJPEG="$ac_cv_lib_jpeg_$1" + AC_MSG_RESULT($ac_cv_lib_jpeg_$1) +else + AC_MSG_RESULT(no) + $3 +fi + +]) + +AC_DEFUN([AC_FIND_JPEG], +[ +dnl first look for libraries +KDE_FIND_JPEG_HELPER(6b, 6b, + KDE_FIND_JPEG_HELPER(normal, [], + [ + LIBJPEG= + ] + ) +) + +dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h +dnl requires system dependent includes loaded before it) +jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" +AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) +test "x$jpeg_incdir" = xNO && jpeg_incdir= + +dnl if headers _and_ libraries are missing, this is no error, and we +dnl continue with a warning (the user will get no jpeg support in khtml) +dnl if only one is missing, it means a configuration error, but we still +dnl only warn +if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then + AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) +else + if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then + AC_MSG_WARN([ +There is an installation error in jpeg support. You seem to have only one +of either the headers _or_ the libraries installed. You may need to either +provide correct --with-extra-... options, or the development package of +libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ +Disabling JPEG support. +]) + else + AC_MSG_WARN([libjpeg not found. disable JPEG support.]) + fi + jpeg_incdir= + LIBJPEG= +fi + +AC_SUBST(LIBJPEG) +AH_VERBATIM(_AC_CHECK_JPEG, +[/* + * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system + * headers and I'm too lazy to write a configure test as long as only + * unixware is related + */ +#ifdef _UNIXWARE +#define HAVE_BOOLEAN +#endif +]) +]) + +AC_DEFUN([KDE_CHECK_QT_JPEG], +[ +if test -n "$LIBJPEG"; then +AC_MSG_CHECKING([if Qt needs $LIBJPEG]) +AC_CACHE_VAL(kde_cv_qt_jpeg, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS $LIBQT" +LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` +ac_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK( +[#include ], + [ + int argc; + char** argv; + QApplication app(argc, argv);], + eval "kde_cv_qt_jpeg=no", + eval "kde_cv_qt_jpeg=yes") +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +fi +]) + +if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then + AC_MSG_RESULT(yes) + LIBJPEG_QT='$(LIBJPEG)' +else + AC_MSG_RESULT(no) + LIBJPEG_QT= +fi + +]) + +AC_DEFUN([AC_FIND_ZLIB], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for libz]) +AC_CACHE_VAL(ac_cv_lib_z, +[ +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#include +], +[ + char buf[42]; + gzFile f = (gzFile) 0; + /* this would segfault.. but we only link, don't run */ + (void) gzgets(f, buf, sizeof(buf)); + + return (zlibVersion() == ZLIB_VERSION); +], + eval "ac_cv_lib_z='-lz'", + eval "ac_cv_lib_z=no") +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if test ! "$ac_cv_lib_z" = no; then + AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) + LIBZ="$ac_cv_lib_z" + AC_MSG_RESULT($ac_cv_lib_z) +else + AC_MSG_ERROR(not found. + Possibly configure picks up an outdated version + installed by XFree86. Remove it from your system. + + Check your installation and look into config.log) + LIBZ="" +fi +AC_SUBST(LIBZ) +]) + +AC_DEFUN([KDE_TRY_TIFFLIB], +[ +AC_MSG_CHECKING([for libtiff $1]) + +AC_CACHE_VAL(kde_cv_libtiff_$1, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" +else +LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" +fi +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl +[ +#include +], + [return (TIFFOpen( "", "r") == 0); ], +[ + kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" +], [ + kde_cv_libtiff_$1=no +]) + +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +]) + +if test "$kde_cv_libtiff_$1" = "no"; then + AC_MSG_RESULT(no) + LIBTIFF="" + $3 +else + LIBTIFF="$kde_cv_libtiff_$1" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) + $2 +fi + +]) + +AC_DEFUN([AC_FIND_TIFF], +[ +AC_REQUIRE([K_PATH_X]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + +KDE_TRY_TIFFLIB(tiff, [], + KDE_TRY_TIFFLIB(tiff34)) + +AC_SUBST(LIBTIFF) +]) + + +AC_DEFUN([AC_FIND_PNG], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_ZLIB]) +AC_MSG_CHECKING([for libpng]) +AC_CACHE_VAL(ac_cv_lib_png, +[ +kde_save_LIBS="$LIBS" +if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" +else +LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" +fi +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + png_structp png_ptr = png_create_read_struct( /* image ptr */ + PNG_LIBPNG_VER_STRING, 0, 0, 0 ); + return( png_ptr != 0 ); + ], + eval "ac_cv_lib_png='-lpng $LIBZ -lm'", + eval "ac_cv_lib_png=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) + LIBPNG="$ac_cv_lib_png" + AC_SUBST(LIBPNG) + AC_MSG_RESULT($ac_cv_lib_png) +else + AC_MSG_RESULT(no) + LIBPNG="" + AC_SUBST(LIBPNG) +fi +]) + + +AC_DEFUN([AC_FIND_JASPER], +[ +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_REQUIRE([AC_FIND_JPEG]) +AC_MSG_CHECKING([for jasper]) +AC_CACHE_VAL(ac_cv_jasper, +[ +kde_save_LIBS="$LIBS" +LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" +kde_save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" + +AC_TRY_LINK(dnl + [ + #include + ], + [ + return( jas_init() ); + ], + eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", + eval "ac_cv_jasper=no" +) +LIBS="$kde_save_LIBS" +CFLAGS="$kde_save_CFLAGS" +])dnl +if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then + AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) + LIB_JASPER="$ac_cv_jasper" + AC_MSG_RESULT($ac_cv_jasper) +else + AC_MSG_RESULT(no) + LIB_JASPER="" +fi +AC_SUBST(LIB_JASPER) +]) + +AC_DEFUN([AC_CHECK_BOOL], +[ + AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) +]) + +AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], +[ +AC_MSG_CHECKING(if you need GNU extensions) +AC_CACHE_VAL(ac_cv_gnu_extensions, +[ +cat > conftest.c << EOF +#include + +#ifdef __GNU_LIBRARY__ +yes +#endif +EOF + +if (eval "$ac_cpp conftest.c") 2>&5 | + egrep "yes" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_gnu_extensions=yes +else + ac_cv_gnu_extensions=no +fi +]) + +AC_MSG_RESULT($ac_cv_gnu_extensions) +if test "$ac_cv_gnu_extensions" = "yes"; then + AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) +fi +]) + +AC_DEFUN([KDE_CHECK_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CXX supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) + CXXFLAGS="$save_CXXFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + +AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], +[ +AC_MSG_CHECKING([whether $CC supports -$1]) +kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` +AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, +[ + AC_LANG_SAVE + AC_LANG_C + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -$1" + AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) + CFLAGS="$save_CFLAGS" + AC_LANG_RESTORE +]) +if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then + AC_MSG_RESULT(yes) + : + $2 +else + AC_MSG_RESULT(no) + : + $3 +fi +]) + + +dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables +dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) +dnl it's all white-space separated +AC_DEFUN([AC_REMOVE_FORBIDDEN], +[ __val=$$1 + __forbid=" $2 " + if test -n "$__val"; then + __new="" + ac_save_IFS=$IFS + IFS=" " + for i in $__val; do + case "$__forbid" in + *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; + *) # Careful to not add spaces, where there were none, because otherwise + # libtool gets confused, if we change e.g. CXX + if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; + esac + done + IFS=$ac_save_IFS + $1=$__new + fi +]) + +dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given +AC_DEFUN([AC_VALIDIFY_CXXFLAGS], +[dnl +if test "x$kde_use_qt_emb" != "xyes"; then + AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) +else + AC_REMOVE_FORBIDDEN(CXX, [-rpath]) + AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) +fi +]) + +AC_DEFUN([AC_CHECK_COMPILERS], +[ + AC_ARG_ENABLE(debug, + AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), + [ + case $enableval in + yes) + kde_use_debug_code="yes" + kde_use_debug_define=no + ;; + full) + kde_use_debug_code="full" + kde_use_debug_define=no + ;; + *) + kde_use_debug_code="no" + kde_use_debug_define=yes + ;; + esac + ], + [kde_use_debug_code="no" + kde_use_debug_define=no + ]) + + dnl Just for configure --help + AC_ARG_ENABLE(dummyoption, + AC_HELP_STRING([--disable-debug], + [disables debug output and debug symbols [default=no]]), + [],[]) + + AC_ARG_ENABLE(strict, + AC_HELP_STRING([--enable-strict], + [compiles with strict compiler options (may not work!)]), + [ + if test $enableval = "no"; then + kde_use_strict_options="no" + else + kde_use_strict_options="yes" + fi + ], [kde_use_strict_options="no"]) + + AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similiar]), + [ + if test $enableval = "no"; then + kde_use_warnings="no" + else + kde_use_warnings="yes" + fi + ], [kde_use_warnings="yes"]) + + dnl enable warnings for debug build + if test "$kde_use_debug_code" != "no"; then + kde_use_warnings=yes + fi + + AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), + [kde_use_profiling=$enableval], + [kde_use_profiling="no"] + ) + + dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS + CFLAGS=" $CFLAGS" + + AC_PROG_CC + + AC_PROG_CPP + + if test "$GCC" = "yes"; then + if test "$kde_use_debug_code" != "no"; then + if test $kde_use_debug_code = "full"; then + CFLAGS="-g3 -fno-inline $CFLAGS" + else + CFLAGS="-g -O2 $CFLAGS" + fi + else + CFLAGS="-O2 $CFLAGS" + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CFLAGS="-DNDEBUG $CFLAGS" + fi + + + case "$host" in + *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; + *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; + esac + + if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then + LDFLAGS="" + fi + + CXXFLAGS=" $CXXFLAGS" + + AC_PROG_CXX + + if test "$GXX" = "yes" || test "$CXX" = "KCC"; then + if test "$kde_use_debug_code" != "no"; then + if test "$CXX" = "KCC"; then + CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + else + if test "$kde_use_debug_code" = "full"; then + CXXFLAGS="-g3 -fno-inline $CXXFLAGS" + else + CXXFLAGS="-g -O2 $CXXFLAGS" + fi + fi + KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) + + dnl convenience compiler flags + KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) + AC_SUBST(WOVERLOADED_VIRTUAL) + else + if test "$CXX" = "KCC"; then + CXXFLAGS="+K3 $CXXFLAGS" + else + CXXFLAGS="-O2 $CXXFLAGS" + fi + fi + fi + + if test "$kde_use_debug_define" = "yes"; then + CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" + fi + + if test "$kde_use_profiling" = "yes"; then + KDE_CHECK_COMPILER_FLAG(pg, + [ + CFLAGS="-pg $CFLAGS" + CXXFLAGS="-pg $CXXFLAGS" + ]) + fi + + if test "$kde_use_warnings" = "yes"; then + if test "$GCC" = "yes"; then + CXXFLAGS="-Wall -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" + case $host in + *-*-linux-gnu) + CFLAGS="-ansi -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" + CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts $CXXFLAGS" + KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) + KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) + ;; + esac + KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) + KDE_CHECK_COMPILER_FLAG(Wnon-virtual-dtor,[CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"]) + fi + fi + + if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then + CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" + fi + + if test "$GXX" = "yes"; then + KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) + KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) + KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) + KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) + fi + if test "$CXX" = "KCC"; then + dnl unfortunately we currently cannot disable exception support in KCC + dnl because doing so is binary incompatible and Qt by default links with exceptions :-( + dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) + dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) + + AC_ARG_ENABLE(pch, + AC_HELP_STRING([--enable-pch], + [enables precompiled header support (currently only KCC) [default=no]]), + [ + kde_use_pch=$enableval + ],[kde_use_pch=no]) + + if test "$kde_use_pch" = "yes"; then + dnl TODO: support --pch-dir! + KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) + dnl the below works (but the dir must exist), but it's + dnl useless for a whole package. + dnl The are precompiled headers for each source file, so when compiling + dnl from scratch, it doesn't make a difference, and they take up + dnl around ~5Mb _per_ sourcefile. + dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, + dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) + fi + dnl this flag controls inlining. by default KCC inlines in optimisation mode + dnl all implementations that are defined inside the class {} declaration. + dnl because of templates-compatibility with broken gcc compilers, this + dnl can cause excessive inlining. This flag limits it to a sane level + KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) + KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) + KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) + KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) + dnl Some source files are shared between multiple executables + dnl (or libraries) and some of those need template instantiations. + dnl In that case KCC needs to compile those sources with + dnl --one_instantiation_per_object. To make it easy for us we compile + dnl _all_ objects with that flag (--one_per is a shorthand). + KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) + fi + AC_SUBST(USE_EXCEPTIONS) + dnl obsolete macro - provided to keep things going + USE_RTTI= + AC_SUBST(USE_RTTI) + + case "$host" in + *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; + *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; + *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; + *-*-solaris*) + if test "$GXX" = yes; then + libstdcpp=`$CXX -print-file-name=libstdc++.so` + if test ! -f $libstdcpp; then + AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) + fi + fi + ;; + esac + + AC_VALIDIFY_CXXFLAGS + + AC_PROG_CXXCPP + + if test "$GCC" = yes; then + NOOPT_CFLAGS=-O0 + fi + KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) + + AC_SUBST(NOOPT_CXXFLAGS) + AC_SUBST(NOOPT_CFLAGS) + + KDE_CHECK_FINAL + KDE_CHECK_CLOSURE + KDE_CHECK_NMCHECK + + ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) +]) + +AC_DEFUN([KDE_ADD_DEPENDENCIES], +[ + [A]M_DEPENDENCIES(CC) + [A]M_DEPENDENCIES(CXX) +]) + +dnl just a wrapper to clean up configure.in +AC_DEFUN([KDE_PROG_LIBTOOL], +[ +AC_REQUIRE([AC_CHECK_COMPILERS]) +AC_REQUIRE([AC_ENABLE_SHARED]) +AC_REQUIRE([AC_ENABLE_STATIC]) + +AC_REQUIRE([AC_LIBTOOL_DLOPEN]) +AC_REQUIRE([KDE_CHECK_LIB64]) + +AC_OBJEXT +AC_EXEEXT + +AM_PROG_LIBTOOL +AC_LIBTOOL_CXX + +LIBTOOL_SHELL="/bin/sh ./libtool" +# LIBTOOL="$LIBTOOL --silent" +KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" +AC_SUBST(KDE_PLUGIN) + +# we patch configure quite some so we better keep that consistent for incremental runs +AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') +]) + +AC_DEFUN([KDE_CHECK_LIB64], +[ + kdelibsuff=no + AC_ARG_ENABLE(libsuffix, + AC_HELP_STRING([--enable-libsuffix], + [/lib directory suffix (64,32,none[=default])]), + kdelibsuff=$enableval) + # TODO: add an auto case that compiles a little C app to check + # where the glibc is + if test "$kdelibsuff" = "no"; then + kdelibsuff= + fi + if test -z "$kdelibsuff"; then + AC_MSG_RESULT([not using lib directory suffix]) + AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) + else + if test "$libdir" = '${exec_prefix}/lib'; then + libdir="$libdir${kdelibsuff}" + AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms + fi + AC_DEFINE_UNQUOTED(KDELIBSUFF, ["\"${kdelibsuff}\""], Suffix for lib directories) + AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) + fi +]) + +AC_DEFUN([KDE_CHECK_TYPES], +[ AC_CHECK_SIZEOF(int, 4)dnl + AC_CHECK_SIZEOF(short)dnl + AC_CHECK_SIZEOF(long, 4)dnl + AC_CHECK_SIZEOF(char *, 4)dnl +])dnl + +dnl Not used - kept for compat only? +AC_DEFUN([KDE_DO_IT_ALL], +[ +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM +AM_INIT_AUTOMAKE($1, $2) +AM_DISABLE_LIBRARIES +AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) +AC_CHECK_COMPILERS +KDE_PROG_LIBTOOL +AM_KDE_WITH_NLS +AC_PATH_KDE +]) + +AC_DEFUN([AC_CHECK_RPATH], +[ +AC_MSG_CHECKING(for rpath) +AC_ARG_ENABLE(rpath, + AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), + USE_RPATH=$enableval, USE_RPATH=yes) + +if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then + + KDE_RPATH="-R \$(kde_libraries)" + + if test -n "$qt_libraries"; then + KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" + fi + dnl $x_libraries is set to /usr/lib in case + if test -n "$X_LDFLAGS"; then + X_RPATH="-R \$(x_libraries)" + KDE_RPATH="$KDE_RPATH $X_RPATH" + fi + if test -n "$KDE_EXTRA_RPATH"; then + KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" + fi +fi +AC_SUBST(KDE_EXTRA_RPATH) +AC_SUBST(KDE_RPATH) +AC_SUBST(X_RPATH) +AC_MSG_RESULT($USE_RPATH) +]) + +dnl Check for the type of the third argument of getsockname +AC_DEFUN([AC_CHECK_SOCKLEN_T], [ + AC_MSG_CHECKING(for socklen_t) + AC_CACHE_VAL(ac_cv_socklen_t, [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ +#include +#include + ],[ +socklen_t a=0; +getsockname(0,(struct sockaddr*)0, &a); + ], + ac_cv_socklen_t=socklen_t, + AC_TRY_COMPILE([ +#include +#include + ],[ +int a=0; +getsockname(0,(struct sockaddr*)0, &a); + ], + ac_cv_socklen_t=int, + ac_cv_socklen_t=size_t + ) + ) + AC_LANG_RESTORE + ]) + + AC_MSG_RESULT($ac_cv_socklen_t) + if test "$ac_cv_socklen_t" != "socklen_t"; then + AC_DEFINE_UNQUOTED(socklen_t, $ac_cv_socklen_t, + [Define the real type of socklen_t]) + fi + AC_DEFINE_UNQUOTED(ksize_t, socklen_t, [Compatibility define]) + +]) + +dnl This is a merge of some macros out of the gettext aclocal.m4 +dnl since we don't need anything, I took the things we need +dnl the copyright for them is: +dnl > +dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. +dnl This Makefile.in is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. +dnl > +dnl for this file it is relicensed under LGPL + +AC_DEFUN([AM_KDE_WITH_NLS], + [ + dnl If we use NLS figure out what method + + AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, + [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then + AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + MSGFMT=$GMSGFMT + AC_SUBST(GMSGFMT) + AC_SUBST(MSGFMT) + + AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext programs is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + AC_SUBST(XGETTEXT) + + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper , 1996. + +# serial 1 +# Stephan Kulow: I appended a _KDE against name conflicts + +dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + + +# Check whether LC_MESSAGES is available in . +# Ulrich Drepper , 1995. + +# serial 1 + +AC_DEFUN([AM_LC_MESSAGES], + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) + fi + fi]) + +dnl From Jim Meyering. +dnl FIXME: migrate into libit. + +AC_DEFUN([AM_FUNC_OBSTACK], +[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, + [AC_TRY_LINK([#include "obstack.h"], + [struct obstack *mem;obstack_free(mem,(char *) 0)], + am_cv_func_obstack=yes, + am_cv_func_obstack=no)]) + if test $am_cv_func_obstack = yes; then + AC_DEFINE(HAVE_OBSTACK) + else + LIBOBJS="$LIBOBJS obstack.o" + fi +]) + +dnl From Jim Meyering. Use this if you use the GNU error.[ch]. +dnl FIXME: Migrate into libit + +AC_DEFUN([AM_FUNC_ERROR_AT_LINE], +[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, + [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], + am_cv_lib_error_at_line=yes, + am_cv_lib_error_at_line=no)]) + if test $am_cv_lib_error_at_line = no; then + LIBOBJS="$LIBOBJS error.o" + fi + AC_SUBST(LIBOBJS)dnl +]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper , 1995. + +# serial 1 +# Stephan Kulow: I put a KDE in it to avoid name conflicts + +AC_DEFUN([AM_KDE_GNU_GETTEXT], + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([AM_KDE_WITH_NLS])dnl + AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next]) + + AC_MSG_CHECKING(for stpcpy) + AC_CACHE_VAL(kde_cv_func_stpcpy, + [ + kde_safe_cxxflags=$CXXFLAGS + CXXFLAGS="-Werror" + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_COMPILE([ + #include + ], + [ + char buffer[200]; + stpcpy(buffer, buffer); + ], + kde_cv_func_stpcpy=yes, + kde_cv_func_stpcpy=no) + AC_LANG_RESTORE + CXXFLAGS=$kde_safe_cxxflags + ]) + AC_MSG_RESULT($kde_cv_func_stpcpy) + if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then + AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) + fi + + AM_LC_MESSAGES + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + ]) + +AC_DEFUN([AC_HAVE_XPM], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= + test -z "$XPM_INCLUDE" && XPM_INCLUDE= + + AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), + xpm_test=$withval, xpm_test="yes") + if test "x$xpm_test" = xno; then + ac_cv_have_xpm=no + else + AC_MSG_CHECKING(for XPM) + AC_CACHE_VAL(ac_cv_have_xpm, + [ + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" + else + LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" + fi + CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" + test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" + AC_TRY_LINK([#include ],[], + ac_cv_have_xpm="yes",ac_cv_have_xpm="no") + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + ])dnl + + if test "$ac_cv_have_xpm" = no; then + AC_MSG_RESULT(no) + XPM_LDFLAGS="" + XPMINC="" + $2 + else + AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) + if test "$XPM_LDFLAGS" = ""; then + XPMLIB='-lXpm $(LIB_X11)' + else + XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' + fi + if test "$XPM_INCLUDE" = ""; then + XPMINC="" + else + XPMINC="-I$XPM_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + AC_SUBST(XPMINC) + AC_SUBST(XPMLIB) +]) + +AC_DEFUN([AC_HAVE_DPMS], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= + test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= + DPMS_LIB= + + AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), + dpms_test=$withval, dpms_test="yes") + if test "x$dpms_test" = xno; then + ac_cv_have_dpms=no + else + AC_MSG_CHECKING(for DPMS) + dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. + dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". + AC_CACHE_VAL(ac_cv_have_dpms, + [ + if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then + AC_MSG_RESULT(no) + ac_cv_have_dpms="no" + else + ac_save_ldflags="$LDFLAGS" + ac_save_cflags="$CFLAGS" + ac_save_libs="$LIBS" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + ac_cv_have_dpms="yes", [ + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries -lX11 -lXext $LIBSOCKET" + LIBS="$LIBS -lXdpms" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AC_TRY_LINK([ + #include + #include + #include + #include + int foo_test_dpms() + { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], + [ + ac_cv_have_dpms="-lXdpms" + ],ac_cv_have_dpms="no") + ]) + LDFLAGS="$ac_save_ldflags" + CFLAGS="$ac_save_cflags" + LIBS="$ac_save_libs" + fi + ])dnl + + if test "$ac_cv_have_dpms" = no; then + AC_MSG_RESULT(no) + DPMS_LDFLAGS="" + DPMSINC="" + $2 + else + AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) + if test "$ac_cv_have_dpms" = "-lXdpms"; then + DPMS_LIB="-lXdpms" + fi + if test "$DPMS_LDFLAGS" = ""; then + DPMSLIB="$DPMS_LIB "'$(LIB_X11)' + else + DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' + fi + if test "$DPMS_INCLUDE" = ""; then + DPMSINC="" + else + DPMSINC="-I$DPMS_INCLUDE" + fi + AC_MSG_RESULT(yes) + $1 + fi + fi + ac_save_cflags="$CFLAGS" + CFLAGS="$CFLAGS $X_INCLUDES" + test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" + AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, + [Define if you have the DPMSCapable prototype in ]) + AC_CHECK_DECL(DPMSCapable, + AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, + [#include ]) + AH_TEMPLATE(HAVE_DPMSINFO_PROTO, + [Define if you have the DPMSInfo prototype in ]) + AC_CHECK_DECL(DPMSInfo, + AC_DEFINE(HAVE_DPMSINFO_PROTO),, + [#include ]) + CFLAGS="$ac_save_cflags" + AC_SUBST(DPMSINC) + AC_SUBST(DPMSLIB) +]) + +AC_DEFUN([AC_HAVE_GL], + [AC_REQUIRE_CPP()dnl + AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) + + test -z "$GL_LDFLAGS" && GL_LDFLAGS= + test -z "$GL_INCLUDE" && GL_INCLUDE= + + AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), + gl_test=$withval, gl_test="yes") + if test "x$kde_use_qt_emb" = "xyes"; then + # GL and Qt Embedded is a no-go for now. + ac_cv_have_gl=no + elif test "x$gl_test" = xno; then + ac_cv_have_gl=no + else + AC_MSG_CHECKING(for GL) + AC_CACHE_VAL(ac_cv_have_gl, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_ldflags="$LDFLAGS" + ac_save_cxxflags="$CXXFLAGS" + LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries -lMesaGL -lMesaGLU" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" + LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$CFLAGS $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include +#include +], [], + ac_cv_have_gl="mesa", ac_cv_have_gl="no") + if test "x$ac_cv_have_gl" = "xno"; then + LDFLAGS="$ac_save_ldflags $X_LDFLAGS $GL_LDFLAGS $all_libraries -lGLU -lGL" + test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LDFLAGS="$LDFLAGS -lX11" + LDFLAGS="$LDFLAGS $LIB_XEXT -lm $LIBSOCKET" + CXXFLAGS="$ac_save_cflags $X_INCLUDES" + test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" + AC_TRY_LINK([#include +#include +], [], + ac_cv_have_gl="yes", ac_cv_have_gl="no") + fi + AC_LANG_RESTORE + LDFLAGS="$ac_save_ldflags" + CXXFLAGS="$ac_save_cxxflags" + ])dnl + + if test "$ac_cv_have_gl" = "no"; then + AC_MSG_RESULT(no) + GL_LDFLAGS="" + GLINC="" + $2 + else + AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) + if test "$GL_LDFLAGS" = ""; then + if test "$ac_cv_have_gl" = "mesa"; then + GLLIB='-lMesaGLU -lMesaGL $(LIB_X11)' + else + GLLIB='-lGLU -lGL $(LIB_X11)' + fi + else + if test "$ac_cv_have_gl" = "mesa"; then + GLLIB="$GL_LDFLAGS -lMesaGLU -lMesaGL "'$(LIB_X11)' + else + GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' + fi + fi + if test "$GL_INCLUDE" = ""; then + GLINC="" + else + GLINC="-I$GL_INCLUDE" + fi + AC_MSG_RESULT($ac_cv_have_gl) + $1 + fi + fi + AC_SUBST(GLINC) + AC_SUBST(GLLIB) +]) + + + dnl shadow password and PAM magic - maintained by ossi@kde.org + +AC_DEFUN([KDE_PAM], [ + AC_REQUIRE([KDE_CHECK_LIBDL]) + + want_pam= + AC_ARG_WITH(pam, + AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), + [ if test "x$withval" = "xyes"; then + want_pam=yes + pam_service=kde + elif test "x$withval" = "xno"; then + want_pam=no + else + want_pam=yes + pam_service=$withval + fi + ], [ pam_service=kde ]) + + use_pam= + PAMLIBS= + if test "x$want_pam" != xno; then + AC_CHECK_LIB(pam, pam_start, [ + AC_CHECK_HEADER(security/pam_appl.h, + [ pam_header=security/pam_appl.h ], + [ AC_CHECK_HEADER(pam/pam_appl.h, + [ pam_header=pam/pam_appl.h ], + [ + AC_MSG_WARN([PAM detected, but no headers found! +Make sure you have the necessary development packages installed.]) + ] + ) + ] + ) + ], , $LIBDL) + if test -z "$pam_header"; then + if test "x$want_pam" = xyes; then + AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) + fi + else + AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) + PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" + use_pam=yes + + dnl darwin claims to be something special + if test "$pam_header" = "pam/pam_appl.h"; then + AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) + fi + + dnl test whether struct pam_message is const (Linux) or not (Sun) + AC_MSG_CHECKING(for const pam_message) + AC_EGREP_HEADER([struct pam_message], $pam_header, + [ AC_EGREP_HEADER([const struct pam_message], $pam_header, + [AC_MSG_RESULT([const: Linux-type PAM])], + [AC_MSG_RESULT([nonconst: Sun-type PAM]) + AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] + )], + [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) + fi + fi + + AC_SUBST(PAMLIBS) +]) + +dnl DEF_PAM_SERVICE(arg name, full name, define name) +AC_DEFUN([DEF_PAM_SERVICE], [ + AC_ARG_WITH($1-pam, + AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE=$withval + else + AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. +You may want to enforce it by using --with-pam.]) + fi + ], + [ if test "x$use_pam" = xyes; then + $3_PAM_SERVICE="$pam_service" + fi + ]) + if test -n "$$3_PAM_SERVICE"; then + AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) + AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) + fi + AC_SUBST($3_PAM_SERVICE) +]) + +AC_DEFUN([KDE_SHADOWPASSWD], [ + AC_REQUIRE([KDE_PAM]) + + AC_CHECK_LIB(shadow, getspent, + [ LIBSHADOW="-lshadow" + ac_use_shadow=yes + ], + [ dnl for UnixWare + AC_CHECK_LIB(gen, getspent, + [ LIBGEN="-lgen" + ac_use_shadow=yes + ], + [ AC_CHECK_FUNC(getspent, + [ ac_use_shadow=yes ], + [ ac_use_shadow=no ]) + ]) + ]) + AC_SUBST(LIBSHADOW) + AC_SUBST(LIBGEN) + + AC_MSG_CHECKING([for shadow passwords]) + + AC_ARG_WITH(shadow, + AC_HELP_STRING([--with-shadow],[If you want shadow password support]), + [ if test "x$withval" != "xno"; then + use_shadow=yes + else + use_shadow=no + fi + ], [ + use_shadow="$ac_use_shadow" + ]) + + if test "x$use_shadow" = xyes; then + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) + else + AC_MSG_RESULT(no) + LIBSHADOW= + LIBGEN= + fi + + dnl finally make the relevant binaries setuid root, if we have shadow passwds. + dnl this still applies, if we could use it indirectly through pam. + if test "x$use_shadow" = xyes || + ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then + case $host in + *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) + SETUIDFLAGS="-m 4755 -o root";; + *) + SETUIDFLAGS="-m 4755";; + esac + fi + AC_SUBST(SETUIDFLAGS) + +]) + +AC_DEFUN([KDE_PASSWDLIBS], [ + AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT + AC_REQUIRE([KDE_PAM]) + AC_REQUIRE([KDE_SHADOWPASSWD]) + + if test "x$use_pam" = "xyes"; then + PASSWDLIBS="$PAMLIBS" + else + PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" + fi + + dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but + dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires + dnl root to read, so kcheckpass needs to be root (even when using pam, since pam + dnl may need to read /etc/master.passwd). + case $host in + *-*-freebsd*) + SETUIDFLAGS="-m 4755 -o root" + ;; + *) + ;; + esac + + AC_SUBST(PASSWDLIBS) +]) + +AC_DEFUN([KDE_CHECK_LIBDL], +[ +AC_CHECK_LIB(dl, dlopen, [ +LIBDL="-ldl" +ac_cv_have_dlfcn=yes +]) + +AC_CHECK_LIB(dld, shl_unload, [ +LIBDL="-ldld" +ac_cv_have_shload=yes +]) + +AC_SUBST(LIBDL) +]) + +AC_DEFUN([KDE_CHECK_DLOPEN], +[ +KDE_CHECK_LIBDL +AC_CHECK_HEADERS(dlfcn.h dl.h) +if test "$ac_cv_header_dlfcn_h" = "no"; then + ac_cv_have_dlfcn=no +fi + +if test "$ac_cv_header_dl_h" = "no"; then + ac_cv_have_shload=no +fi + +dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE +dnl (MM) +AC_ARG_ENABLE(dlopen, +AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), +enable_dlopen=$enableval, +enable_dlopen=yes) + +# override the user's opinion, if we know it better ;) +if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then + enable_dlopen=no +fi + +if test "$ac_cv_have_dlfcn" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) +fi + +if test "$ac_cv_have_shload" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) +fi + +if test "$enable_dlopen" = no ; then + test -n "$1" && eval $1 +else + test -n "$2" && eval $2 +fi + +]) + +AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], +[ +KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) +KDE_PROG_LIBTOOL +AC_MSG_CHECKING([dynamic loading]) +eval "`egrep '^build_libtool_libs=' libtool`" +if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then + dynamic_loading=yes + AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) +else + dynamic_loading=no +fi +AC_MSG_RESULT($dynamic_loading) +if test "$dynamic_loading" = "yes"; then + $1 +else + $2 +fi +]) + +AC_DEFUN([KDE_ADD_INCLUDES], +[ +if test -z "$1"; then + test_include="Pix.h" +else + test_include="$1" +fi + +AC_MSG_CHECKING([for libg++ ($test_include)]) + +AC_CACHE_VAL(kde_cv_libgpp_includes, +[ +kde_cv_libgpp_includes=no + + for ac_dir in \ + \ + /usr/include/g++ \ + /usr/include \ + /usr/unsupported/include \ + /opt/include \ + $extra_include \ + ; \ + do + if test -r "$ac_dir/$test_include"; then + kde_cv_libgpp_includes=$ac_dir + break + fi + done +]) + +AC_MSG_RESULT($kde_cv_libgpp_includes) +if test "$kde_cv_libgpp_includes" != "no"; then + all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" +fi +]) +]) + +AC_DEFUN([KDE_CHECK_LIBPTHREAD], +[ + LIBPTHREAD="" + + if test -n "$PTHREAD_LIBS"; then + PTHREAD_LIBS_save="$PTHREAD_LIBS" + PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` + KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [LIBPTHREAD="$PTHREAD_LIBS_save"] ) + PTHREAD_LIBS="$PTHREAD_LIBS_save" + fi + + if test -z "$LIBPTHREAD"; then + AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"] ) + fi + + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], +[ + USE_THREADS="" + if test -z "$LIBPTHREAD"; then + KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) + fi + + AH_VERBATIM(__svr_define, [ +#if defined(__SVR4) && !defined(__svr4__) +#define __svr4__ 1 +#endif +]) + case $host_os in + solaris*) + KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) + CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" + ;; + freebsd*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" + ;; + aix*) + CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" + LIBPTHREAD="$LIBPTHREAD -lc_r" + ;; + linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" + if test "$CXX" = "KCC"; then + CXXFLAGS="$CXXFLAGS --thread_safe" + NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" + fi + ;; + *) + ;; + esac + AC_SUBST(USE_THREADS) + AC_SUBST(LIBPTHREAD) +]) + +AC_DEFUN([KDE_CHECK_THREADING], +[ + AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) + AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) + dnl default is yes if libpthread is found and no if no libpthread is available + if test -z "$LIBPTHREAD"; then + if test -z "$USE_THREADS"; then + kde_check_threading_default=no + else + kde_check_threading_default=yes + fi + else + kde_check_threading_default=yes + fi + AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), + kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) + if test "x$kde_use_threading" = "xyes"; then + AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) + fi +]) + +AC_DEFUN([KDE_TRY_LINK_PYTHON], +[ +if test "$kde_python_link_found" = no; then + +if test "$1" = normal; then + AC_MSG_CHECKING(if a Python application links) +else + AC_MSG_CHECKING(if Python depends on $2) +fi + +AC_CACHE_VAL(kde_cv_try_link_python_$1, +[ +kde_save_cflags="$CFLAGS" +CFLAGS="$CFLAGS $PYTHONINC" +kde_save_libs="$LIBS" +LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" +kde_save_ldflags="$LDFLAGS" +LDFLAGS="$LDFLAGS $PYTHONLIB" + +AC_TRY_LINK( +[ +#include +],[ + PySys_SetArgv(1, 0); +], + [kde_cv_try_link_python_$1=yes], + [kde_cv_try_link_python_$1=no] +) +CFLAGS="$kde_save_cflags" +LIBS="$kde_save_libs" +LDFLAGS="$kde_save_ldflags" +]) + +if test "$kde_cv_try_link_python_$1" = "yes"; then + AC_MSG_RESULT(yes) + kde_python_link_found=yes + if test ! "$1" = normal; then + LIBPYTHON="$LIBPYTHON $2" + fi + $3 +else + AC_MSG_RESULT(no) + $4 +fi + +fi + +]) + +AC_DEFUN([KDE_CHECK_PYTHON_DIR], +[ +AC_MSG_CHECKING([for Python directory]) + +AC_CACHE_VAL(kde_cv_pythondir, +[ + if test -z "$PYTHONDIR"; then + kde_cv_pythondir=/usr/local + else + kde_cv_pythondir="$PYTHONDIR" + fi +]) + +AC_ARG_WITH(pythondir, +AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), +[ + ac_python_dir=$withval +], ac_python_dir=$kde_cv_pythondir +) + +AC_MSG_RESULT($ac_python_dir) +]) + +AC_DEFUN([KDE_CHECK_PYTHON_INTERN], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) +AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) + +if test -z "$1"; then + version="1.5" +else + version="$1" +fi + +AC_MSG_CHECKING([for Python$version]) + +python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" +AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) +if test ! -r $python_incdir/Python.h; then + AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) + python_incdir=$python_incdir/python$version + if test ! -r $python_incdir/Python.h; then + python_incdir=no + fi +fi + +PYTHONINC=-I$python_incdir + +python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" +AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) +if test ! -r $python_libdir/libpython$version.so; then + AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) + if test ! -r $python_libdir/libpython$version.a; then + AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) + python_libdir=$python_libdir/python$version/config + if test ! -r $python_libdir/libpython$version.a; then + python_libdir=no + fi + fi +fi + +PYTHONLIB=-L$python_libdir +kde_orig_LIBPYTHON=$LIBPYTHON +if test -z "$LIBPYTHON"; then + LIBPYTHON=-lpython$version +fi + +AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) +python_moddir=$python_moddir/python$version +if test ! -r $python_moddir/copy.py; then + python_moddir=no +fi + +PYTHONMODDIR=$python_moddir + +AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) + +if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then + LIBPYTHON=$kde_orig_LIBPYTHON + test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" + test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" + $2 +else + dnl Note: this test is very weak + kde_python_link_found=no + KDE_TRY_LINK_PYTHON(normal) + KDE_TRY_LINK_PYTHON(m, -lm) + KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) + KDE_TRY_LINK_PYTHON(tcl, -ltcl) + KDE_TRY_LINK_PYTHON(db2, -ldb2) + KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) + KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) + KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) + KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], + [AC_MSG_WARN([it seems, Python depends on another library. + Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this + and contact the authors to let them know about this problem]) + ]) + + LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" + AC_SUBST(PYTHONINC) + AC_SUBST(PYTHONLIB) + AC_SUBST(LIBPYTHON) + AC_SUBST(PYTHONMODDIR) + AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) +fi + +]) + + +AC_DEFUN([KDE_CHECK_PYTHON], +[ + KDE_CHECK_PYTHON_INTERN("2.3", + [KDE_CHECK_PYTHON_INTERN("2.2", + [KDE_CHECK_PYTHON_INTERN("2.1", + [KDE_CHECK_PYTHON_INTERN("2.0", + [KDE_CHECK_PYTHON_INTERN($1, $2) ]) + ]) + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_STL], +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" + + AC_MSG_CHECKING([if C++ programs can be compiled]) + AC_CACHE_VAL(kde_cv_stl_works, + [ + AC_TRY_COMPILE([ +#include +using namespace std; +],[ + string astring="Hallo Welt."; + astring.erase(0, 6); // now astring is "Welt" + return 0; +], kde_cv_stl_works=yes, + kde_cv_stl_works=no) +]) + + AC_MSG_RESULT($kde_cv_stl_works) + + if test "$kde_cv_stl_works" = "yes"; then + # back compatible + AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) + else + AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. +Check config.log for details - if you're using a Linux distribution you might miss +a package named similiar to libstd++-dev.]) + fi + + CXXFLAGS="$ac_save_CXXFLAGS" + AC_LANG_RESTORE +]) + +AC_DEFUN([AC_FIND_QIMGIO], + [AC_REQUIRE([AC_FIND_JPEG]) +AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) +AC_MSG_CHECKING([for qimgio]) +AC_CACHE_VAL(ac_cv_lib_qimgio, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +ac_save_LIBS="$LIBS" +ac_save_CXXFLAGS="$CXXFLAGS" +LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" +CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" +AC_TRY_RUN(dnl +[ +#include +#include +int main() { + QString t = "hallo"; + t.fill('t'); + qInitImageIO(); +} +], + ac_cv_lib_qimgio=yes, + ac_cv_lib_qimgio=no, + ac_cv_lib_qimgio=no) +LIBS="$ac_save_LIBS" +CXXFLAGS="$ac_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then + LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" + AC_MSG_RESULT(yes) + AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) + AC_SUBST(LIBQIMGIO) +else + AC_MSG_RESULT(not found) +fi +]) + +AC_DEFUN([AM_DISABLE_LIBRARIES], +[ + AC_PROVIDE([AM_ENABLE_STATIC]) + AC_PROVIDE([AM_ENABLE_SHARED]) + enable_static=no + enable_shared=yes +]) + + +AC_DEFUN([AC_CHECK_UTMP_FILE], +[ + AC_MSG_CHECKING([for utmp file]) + + AC_CACHE_VAL(kde_cv_utmp_file, + [ + kde_cv_utmp_file=no + + for ac_file in \ + \ + /var/run/utmp \ + /var/adm/utmp \ + /etc/utmp \ + ; \ + do + if test -r "$ac_file"; then + kde_cv_utmp_file=$ac_file + break + fi + done + ]) + + if test "$kde_cv_utmp_file" != "no"; then + AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) + $1 + AC_MSG_RESULT($kde_cv_utmp_file) + else + $2 + AC_MSG_RESULT([non found]) + fi +]) + + +AC_DEFUN([KDE_CREATE_SUBDIRSLIST], +[ + +DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" + +if test ! -s $srcdir/subdirs; then + dnl Note: Makefile.common creates subdirs, so this is just a fallback + TOPSUBDIRS="" + files=`cd $srcdir && ls -1` + dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` + for i in $dirs; do + echo $i >> $srcdir/subdirs + done +fi + +ac_topsubdirs= +if test -s $srcdir/inst-apps; then + ac_topsubdirs="`cat $srcdir/inst-apps`" +elif test -s $srcdir/subdirs; then + ac_topsubdirs="`cat $srcdir/subdirs`" +fi + +for i in $ac_topsubdirs; do + AC_MSG_CHECKING([if $i should be compiled]) + if test -d $srcdir/$i; then + install_it="yes" + for j in $DO_NOT_COMPILE; do + if test $i = $j; then + install_it="no" + fi + done + else + install_it="no" + fi + AC_MSG_RESULT($install_it) + vari=`echo $i | sed -e 's,[[-+.@]],_,g'` + if test $install_it = "yes"; then + TOPSUBDIRS="$TOPSUBDIRS $i" + eval "$vari""_SUBDIR_included=yes" + else + eval "$vari""_SUBDIR_included=no" + fi +done + +AC_SUBST(TOPSUBDIRS) +]) + +AC_DEFUN([KDE_CHECK_NAMESPACES], +[ +AC_MSG_CHECKING(whether C++ compiler supports namespaces) +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +AC_TRY_COMPILE([ +], +[ +namespace Foo { + extern int i; + namespace Bar { + extern int i; + } +} + +int Foo::i = 0; +int Foo::Bar::i = 1; +],[ + AC_MSG_RESULT(yes) + AC_DEFINE(HAVE_NAMESPACES) +], [ +AC_MSG_RESULT(no) +]) +AC_LANG_RESTORE +]) + +dnl ------------------------------------------------------------------------ +dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_S_ISSOCK], +[ +AC_MSG_CHECKING(for S_ISSOCK) +AC_CACHE_VAL(ac_cv_have_s_issock, +[ +AC_TRY_LINK( +[ +#include +], +[ +struct stat buff; +int b = S_ISSOCK( buff.st_mode ); +], +ac_cv_have_s_issock=yes, +ac_cv_have_s_issock=no) +]) +AC_MSG_RESULT($ac_cv_have_s_issock) +if test "$ac_cv_have_s_issock" = "yes"; then + AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) +fi + +AH_VERBATIM(_ISSOCK, +[ +#ifndef HAVE_S_ISSOCK +#define HAVE_S_ISSOCK +#define S_ISSOCK(mode) (1==0) +#endif +]) + +]) + +dnl ------------------------------------------------------------------------ +dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], +[ +AC_MSG_CHECKING(for MAXPATHLEN) +AC_CACHE_VAL(ac_cv_maxpathlen, +[ +cat > conftest.$ac_ext < +#endif +#include +#include +#ifndef MAXPATHLEN +#define MAXPATHLEN 1024 +#endif + +KDE_HELLO MAXPATHLEN + +EOF + +ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" + +if AC_TRY_EVAL(ac_try) && test -s conftest.out; then + ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` +else + ac_cv_maxpathlen=1024 +fi + +rm conftest.* + +]) +AC_MSG_RESULT($ac_cv_maxpathlen) +AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) +]) + +AC_DEFUN([KDE_CHECK_HEADER], +[ + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADER([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_CHECK_HEADERS], +[ + AH_CHECK_HEADERS([$1]) + AC_LANG_SAVE + kde_safe_cppflags=$CPPFLAGS + CPPFLAGS="$CPPFLAGS $all_includes" + AC_LANG_CPLUSPLUS + AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) + CPPFLAGS=$kde_safe_cppflags + AC_LANG_RESTORE +]) + +AC_DEFUN([KDE_FAST_CONFIGURE], +[ + dnl makes configure fast (needs perl) + AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), + with_fast_perl=$enableval, with_fast_perl=yes) +]) + +AC_DEFUN([KDE_CONF_FILES], +[ + val= + if test -f $srcdir/configure.files ; then + val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` + fi + CONF_FILES= + if test -n "$val" ; then + for i in $val ; do + CONF_FILES="$CONF_FILES $i" + done + fi + AC_SUBST(CONF_FILES) +])dnl + +dnl This sets the prefix, for arts and kdelibs +dnl Do NOT use in any other module. +dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde +AC_DEFUN([KDE_SET_PREFIX_CORE], +[ + unset CDPATH + dnl make $KDEDIR the default for the installation + AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) + + if test "x$prefix" = "xNONE"; then + prefix=$ac_default_prefix + ac_configure_args="$ac_configure_args --prefix=$prefix" + fi + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + + +AC_DEFUN([KDE_SET_PREFIX], +[ + unset CDPATH + dnl We can't give real code to that macro, only a value. + dnl It only matters for --help, since we set the prefix in this function anyway. + AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) + + KDE_SET_DEFAULT_BINDIRS + if test "x$prefix" = "xNONE"; then + dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + else + dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH + kde_save_PATH="$PATH" + PATH="$exec_prefix/bin:$prefix/bin:$PATH" + KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) + PATH="$kde_save_PATH" + fi + + kde_libs_prefix=`$KDECONFIG --prefix` + if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then + AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. + This means it has been moved since you installed it. + This won't work. Please recompile kdelibs for the new prefix. + ]) + fi + kde_libs_htmldir=`$KDECONFIG --install html --expandvars` + + AC_MSG_CHECKING([where to install]) + if test "x$prefix" = "xNONE"; then + prefix=$kde_libs_prefix + AC_MSG_RESULT([$prefix (as returned by kde-config)]) + else + dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different + given_prefix=$prefix + AC_MSG_RESULT([$prefix (as requested)]) + fi + + # And delete superfluous '/' to make compares easier + prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` + + AC_SUBST(KDECONFIG) + AC_SUBST(kde_libs_prefix) + AC_SUBST(kde_libs_htmldir) + + KDE_FAST_CONFIGURE + KDE_CONF_FILES +]) + +pushdef([AC_PROG_INSTALL], +[ + dnl our own version, testing for a -p flag + popdef([AC_PROG_INSTALL]) + dnl as AC_PROG_INSTALL works as it works we first have + dnl to save if the user didn't specify INSTALL, as the + dnl autoconf one overwrites INSTALL and we have no chance to find + dnl out afterwards + test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL + test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM + test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT + AC_PROG_INSTALL + + if test -z "$kde_save_INSTALL_given" ; then + # OK, user hasn't given any INSTALL, autoconf found one for us + # now we test, if it supports the -p flag + AC_MSG_CHECKING(for -p flag to install) + rm -f confinst.$$.* > /dev/null 2>&1 + echo "Testtest" > confinst.$$.orig + ac_res=no + if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then + if test -f confinst.$$.new ; then + # OK, -p seems to do no harm to install + INSTALL="${INSTALL} -p" + ac_res=yes + fi + fi + rm -f confinst.$$.* + AC_MSG_RESULT($ac_res) + fi + dnl the following tries to resolve some signs and wonders coming up + dnl with different autoconf/automake versions + dnl e.g.: + dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s + dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) + dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s + dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has + dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the + dnl install-@DIR@PROGRAMS targets to explicitly use that flag + dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as + dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 + dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure + dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from + dnl automake (due to broken Makefile.am or whatever) to install programs, + dnl and so does not see the -s flag in automake > 1.4 + dnl to clean up that mess we: + dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG + dnl which cleans KDE's program with automake > 1.4; + dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems + dnl with automake<=1.4 + dnl note that dues to this sometimes two '-s' flags are used (if KDE + dnl properly uses install-@DIR@PROGRAMS, but I don't care + dnl + dnl And to all this comes, that I even can't write in comments variable + dnl names used by automake, because it is so stupid to think I wanted to + dnl _use_ them, therefor I have written A_M_... instead of AM_ + dnl hmm, I wanted to say something ... ahh yes: Arghhh. + + if test -z "$kde_save_INSTALL_PROGRAM_given" ; then + INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' + fi + if test -z "$kde_save_INSTALL_SCRIPT_given" ; then + INSTALL_SCRIPT='${INSTALL}' + fi +])dnl + +AC_DEFUN([KDE_LANG_CPLUSPLUS], +[AC_LANG_CPLUSPLUS +ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' +pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) +]) + +pushdef([AC_LANG_CPLUSPLUS], +[popdef([AC_LANG_CPLUSPLUS]) +KDE_LANG_CPLUSPLUS +]) + +AC_DEFUN([KDE_CHECK_LONG_LONG], +[ +AC_MSG_CHECKING(for long long) +AC_CACHE_VAL(kde_cv_c_long_long, +[ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + AC_TRY_LINK([], [ + long long foo = 0; + foo = foo+1; + ], + kde_cv_c_long_long=yes, kde_cv_c_long_long=no) + AC_LANG_RESTORE +]) +AC_MSG_RESULT($kde_cv_c_long_long) +if test "$kde_cv_c_long_long" = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) +fi +]) + +AC_DEFUN([KDE_CHECK_LIB], +[ + kde_save_LDFLAGS="$LDFLAGS" + dnl AC_CHECK_LIB modifies LIBS, so save it here + kde_save_LIBS="$LIBS" + LDFLAGS="$LDFLAGS $all_libraries" + case $host_os in + aix*) LDFLAGS="-brtl $LDFLAGS" + test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" + ;; + esac + AC_CHECK_LIB($1, $2, $3, $4, $5) + LDFLAGS="$kde_save_LDFLAGS" + LIBS="$kde_save_LIBS" +]) + +AC_DEFUN([KDE_JAVA_PREFIX], +[ + dir=`dirname "$1"` + base=`basename "$1"` + list=`ls -1 $dir 2> /dev/null` + for entry in $list; do + if test -d $dir/$entry/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/bin" + ;; + esac + elif test -d $dir/$entry/jre/bin; then + case $entry in + $base) + javadirs="$javadirs $dir/$entry/jre/bin" + ;; + esac + fi + done +]) + +dnl KDE_CHEC_JAVA_DIR(onlyjre) +AC_DEFUN([KDE_CHECK_JAVA_DIR], +[ + +AC_ARG_WITH(java, +AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), +[ ac_java_dir=$withval +], ac_java_dir="" +) + +AC_MSG_CHECKING([for Java]) + +dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH +if test "x$ac_java_dir" = "xno"; then + kde_java_bindir=no + kde_java_includedir=no + kde_java_libjvmdir=no + kde_java_libgcjdir=no + kde_java_libhpidir=no +else + if test "x$ac_java_dir" = "x"; then + + + dnl No option set -> collect list of candidate paths + if test -n "$JAVA_HOME"; then + KDE_JAVA_PREFIX($JAVA_HOME) + fi + KDE_JAVA_PREFIX(/usr/j2se) + KDE_JAVA_PREFIX(/usr/lib/j2se) + KDE_JAVA_PREFIX(/usr/j*dk*) + KDE_JAVA_PREFIX(/usr/lib/j*dk*) + KDE_JAVA_PREFIX(/opt/j*sdk*) + KDE_JAVA_PREFIX(/usr/lib/java*) + KDE_JAVA_PREFIX(/usr/java*) + KDE_JAVA_PREFIX(/usr/java/j*dk*) + KDE_JAVA_PREFIX(/usr/java/j*re*) + KDE_JAVA_PREFIX(/usr/lib/SunJava2*) + KDE_JAVA_PREFIX(/usr/lib/SunJava*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) + KDE_JAVA_PREFIX(/usr/lib/IBMJava*) + KDE_JAVA_PREFIX(/opt/java*) + + kde_cv_path="NONE" + kde_save_IFS=$IFS + IFS=':' + for dir in $PATH; do + if test -d "$dir"; then + javadirs="$javadirs $dir" + fi + done + IFS=$kde_save_IFS + jredirs= + + dnl Now javadirs contains a list of paths that exist, all ending with bin/ + for dir in $javadirs; do + dnl Check for the java executable + if test -x "$dir/java"; then + dnl And also check for a libjvm.so somewhere under there + dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. + if test "$dir" != "/usr/bin"; then + libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + if test ! -f $libjvmdir/libjvm.so; then continue; fi + jredirs="$jredirs $dir" + fi + fi + done + + dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found + JAVAC= + JAVA= + kde_java_bindir=no + for dir in $jredirs; do + JAVA="$dir/java" + kde_java_bindir=$dir + if test -x "$dir/javac"; then + JAVAC="$dir/javac" + break + fi + done + + if test -n "$JAVAC"; then + dnl this substitution might not work - well, we test for jni.h below + kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` + else + kde_java_includedir=no + fi + else + dnl config option set + kde_java_bindir=$ac_java_dir/bin + if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then + kde_java_includedir=no + else + kde_java_includedir=$ac_java_dir/include + fi + fi +fi + +dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" +if test "x$kde_java_bindir" != "xno"; then + + dnl Look for libjvm.so + kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` + dnl Look for libgcj.so + kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` + dnl Look for libhpi.so and avoid green threads + kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` + + dnl Now check everything's fine under there + dnl the include dir is our flag for having the JDK + if test -d "$kde_java_includedir"; then + if test ! -x "$kde_java_bindir/javac"; then + AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) + fi + if test ! -x "$kde_java_bindir/javah"; then + AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -x "$kde_java_bindir/jar"; then + AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + if test ! -r "$kde_java_includedir/jni.h"; then + AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) + fi + + jni_includes="-I$kde_java_includedir" + dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. + dnl and under linux here.. + + dnl not needed for gcj + + if test "x$kde_java_libgcjdir" = "x"; then + test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" + test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" + test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" + fi + + else + JAVAC= + jni_includes= + fi + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libjvmdir/libjvm.so"; then + AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) + fi + else + if test ! -r "$kde_java_libgcjdir/libgcj.so"; then + AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) + fi + fi + + if test ! -x "$kde_java_bindir/java"; then + AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) + fi + + dnl not needed for gcj compile + + if test "x$kde_java_libgcjdir" = "x"; then + if test ! -r "$kde_java_libhpidir/libhpi.so"; then + AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) + fi + fi + + if test -n "$jni_includes"; then + dnl Check for JNI version + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + ac_cxxflags_safe="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" + + AC_TRY_COMPILE([ + #include + ], + [ + #ifndef JNI_VERSION_1_2 + Syntax Error + #endif + ],[ kde_jni_works=yes ], + [ kde_jni_works=no ]) + + if test $kde_jni_works = no; then + AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. + You need to have Java Development Kit (JDK) version 1.2. + + Use --with-java to specify another location. + Use --without-java to configure without java support. + Or download a newer JDK and try again. + See e.g. http://java.sun.com/products/jdk/1.2 ]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + AC_LANG_RESTORE + + dnl All tests ok, inform and subst the variables + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + if test "x$kde_java_libgcjdir" = "x"; then + JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" + else + JVMLIBS="-L$kde_java_libgcjdir -lgcj" + fi + AC_MSG_RESULT([java JDK in $kde_java_bindir]) + + else + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([java JRE in $kde_java_bindir]) + fi +elif test -d "/Library/Java/Home"; then + kde_java_bindir="/Library/Java/Home/bin" + jni_includes="-I/Library/Java/Home/include" + + JAVAC=$kde_java_bindir/javac + JAVAH=$kde_java_bindir/javah + JAR=$kde_java_bindir/jar + JVMLIBS="-Xlinker -framework -Xlinker JavaVM" + + AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) + AC_MSG_RESULT([Apple Java Framework]) +else + AC_MSG_RESULT([none found]) +fi + +AC_SUBST(JAVAC) +AC_SUBST(JAVAH) +AC_SUBST(JAR) +AC_SUBST(JVMLIBS) +AC_SUBST(jni_includes) + +# for backward compat +kde_cv_java_includedir=$kde_java_includedir +kde_cv_java_bindir=$kde_java_bindir +]) + +dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. +dnl When the argument list becomes big, as in KDE for AC_OUTPUT in +dnl big packages, m4_foreach is dog-slow. So use our own version of +dnl it. (matz@kde.org) +m4_define([mm_foreach], +[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) +m4_define([mm_car], [[$1]]) +m4_define([mm_car2], [[$@]]) +m4_define([_mm_foreach], +[m4_if(m4_quote($2), [], [], + [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], + mm_car2(m4_shift($2)), + [$3])])]) +m4_define([AC_FOREACH], +[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) + +AC_DEFUN([KDE_NEED_FLEX], +[ +kde_libs_safe=$LIBS +LIBS="$LIBS $USER_LDFLAGS" +AM_PROG_LEX +LIBS=$kde_libs_safe +if test -z "$LEXLIB"; then + AC_MSG_ERROR([You need to have flex installed.]) +fi +AC_SUBST(LEXLIB) +]) + +AC_DEFUN([AC_PATH_QTOPIA], +[ + dnl TODO: use AC_CACHE_VAL + + if test -z "$1"; then + qtopia_minver_maj=1 + qtopia_minver_min=5 + qtopia_minver_pat=0 + else + qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` + qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` + qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` + fi + + qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" + qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" + + AC_REQUIRE([AC_PATH_QT]) + + AC_MSG_CHECKING([for Qtopia]) + + LIB_QTOPIA="-lqpe" + AC_SUBST(LIB_QTOPIA) + + kde_qtopia_dirs="$QPEDIR /opt/Qtopia" + + ac_qtopia_incdir=NO + + AC_ARG_WITH(qtopia-dir, + AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), + [ ac_qtopia_incdir="$withval"/include] ) + + qtopia_incdirs="" + for dir in $kde_qtopia_dirs; do + qtopia_incdirs="$qtopia_incdirs $dir/include" + done + + if test ! "$ac_qtopia_incdir" = "NO"; then + qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" + fi + + qtopia_incdir="" + AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) + ac_qtopia_incdir="$qtopia_incdir" + + if test -z "$qtopia_incdir"; then + AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) + fi + + qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; + qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; + qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; + + qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" + qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" + if test "$qtopia_ver" -lt "$qtopia_minver"; then + AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr +is required.]) + fi + + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + + ac_cxxflags_safe="$CXXFLAGS" + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" + LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" + LIBS="$LIBS $LIB_QTOPIA $LIBQT" + + cat > conftest.$ac_ext < +#include + +int main( int argc, char **argv ) +{ + QPEApplication app( argc, argv ); + return 0; +} +EOF + + if AC_TRY_EVAL(ac_link) && test -s conftest; then + rm -f conftest* + else + rm -f conftest* + AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at +the end of config.log]) + fi + + CXXFLAGS="$ac_cxxflags_safe" + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + AC_LANG_RESTORE + + QTOPIA_INCLUDES="-I$qtopia_incdir" + AC_SUBST(QTOPIA_INCLUDES) + + AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) +]) + + +AC_DEFUN([KDE_INIT_DOXYGEN], +[ +AC_MSG_CHECKING([for Qt docs]) +kde_qtdir= +if test "${with_qt_dir+set}" = set; then + kde_qtdir="$with_qt_dir" +fi + +AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) +AC_MSG_RESULT($QTDOCDIR) + +AC_SUBST(QTDOCDIR) + +KDE_FIND_PATH(dot, DOT, [], []) +if test -n "$DOT"; then + KDE_HAVE_DOT="YES" +else + KDE_HAVE_DOT="NO" +fi +AC_SUBST(KDE_HAVE_DOT) +KDE_FIND_PATH(doxygen, DOXYGEN, [], []) +AC_SUBST(DOXYGEN) + +DOXYGEN_PROJECT_NAME="$1" +DOXYGEN_PROJECT_NUMBER="$2" +AC_SUBST(DOXYGEN_PROJECT_NAME) +AC_SUBST(DOXYGEN_PROJECT_NUMBER) + +KDE_HAS_DOXYGEN=no +if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then + KDE_HAS_DOXYGEN=yes +fi +AC_SUBST(KDE_HAS_DOXYGEN) + +]) + + +AC_DEFUN([AC_FIND_BZIP2], +[ +AC_MSG_CHECKING([for bzDecompress in libbz2]) +AC_CACHE_VAL(ac_cv_lib_bzip2, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_LIBS="$LIBS" +LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" +kde_save_CXXFLAGS="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" +AC_TRY_LINK(dnl +[ +#define BZ_NO_STDIO +#include +], + [ bz_stream s; (void) bzDecompress(&s); ], + eval "ac_cv_lib_bzip2='-lbz2'", + eval "ac_cv_lib_bzip2=no") +LIBS="$kde_save_LIBS" +CXXFLAGS="$kde_save_CXXFLAGS" +AC_LANG_RESTORE +])dnl +AC_MSG_RESULT($ac_cv_lib_bzip2) + +if test ! "$ac_cv_lib_bzip2" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2" + AC_SUBST(LIBBZ2) + +else + + cxx_shared_flag= + ld_shared_flag= + KDE_CHECK_COMPILER_FLAG(shared, [ + ld_shared_flag="-shared" + ]) + KDE_CHECK_COMPILER_FLAG(fPIC, [ + cxx_shared_flag="-fPIC" + ]) + + AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) + AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, + [ + AC_LANG_SAVE + AC_LANG_CPLUSPLUS + kde_save_LIBS="$LIBS" + LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" + kde_save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" + + AC_TRY_LINK(dnl + [ + #define BZ_NO_STDIO + #include + ], + [ bz_stream s; (void) BZ2_bzDecompress(&s); ], + eval "ac_cv_lib_bzip2_prefix='-lbz2'", + eval "ac_cv_lib_bzip2_prefix=no") + LIBS="$kde_save_LIBS" + CXXFLAGS="$kde_save_CXXFLAGS" + AC_LANG_RESTORE + ])dnl + + AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) + + if test ! "$ac_cv_lib_bzip2_prefix" = no; then + BZIP2DIR=bzip2 + + LIBBZ2="$ac_cv_lib_bzip2_prefix" + AC_SUBST(LIBBZ2) + + AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) + dnl else, we just ignore this + fi + +fi +AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") +]) + +dnl ------------------------------------------------------------------------ +dnl Try to find the SSL headers and libraries. +dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) +dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) +dnl ------------------------------------------------------------------------ +dnl +AC_DEFUN([KDE_CHECK_SSL], +[ +LIBSSL="-lssl -lcrypto" +AC_REQUIRE([KDE_CHECK_LIB64]) + +ac_ssl_includes=NO ac_ssl_libraries=NO +ssl_libraries="" +ssl_includes="" +AC_ARG_WITH(ssl-dir, + AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), + [ ac_ssl_includes="$withval"/include + ac_ssl_libraries="$withval"/lib$kdelibsuff + ]) + +want_ssl=yes +AC_ARG_WITH(ssl, + AC_HELP_STRING([--without-ssl],[disable SSL checks]), + [want_ssl=$withval]) + +if test $want_ssl = yes; then + +AC_MSG_CHECKING(for OpenSSL) + +AC_CACHE_VAL(ac_cv_have_ssl, +[#try to guess OpenSSL locations + + ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" + ssl_incdirs="$ac_ssl_includes $ssl_incdirs" + AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) + ac_ssl_includes="$ssl_incdir" + + ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" + if test ! "$ac_ssl_libraries" = "NO"; then + ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" + fi + + test=NONE + ssl_libdir=NONE + for dir in $ssl_libdirs; do + try="ls -1 $dir/libssl*" + if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi + done + + ac_ssl_libraries="$ssl_libdir" + + ac_ldflags_safe="$LDFLAGS" + ac_libs_safe="$LIBS" + + LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" + LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" + + AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, + ac_ssl_rsaref="yes" + , + ac_ssl_rsaref="no" + ) + + LDFLAGS="$ac_ldflags_safe" + LIBS="$ac_libs_safe" + + if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then + have_ssl=no + else + have_ssl=yes; + fi + + ]) + + eval "$ac_cv_have_ssl" + + AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) + + AC_MSG_CHECKING([whether OpenSSL uses rsaref]) + AC_MSG_RESULT($ac_ssl_rsaref) + + AC_MSG_CHECKING([for easter eggs]) + AC_MSG_RESULT([none found]) + +else + have_ssl=no +fi + +if test "$have_ssl" = yes; then + AC_MSG_CHECKING(for OpenSSL version) + dnl Check for SSL version + AC_CACHE_VAL(ac_cv_ssl_version, + [ + + cat >conftest.$ac_ext < +#include + int main() { + +#ifndef OPENSSL_VERSION_NUMBER + printf("ssl_version=\\"error\\"\n"); +#else + if (OPENSSL_VERSION_NUMBER < 0x00906000) + printf("ssl_version=\\"old\\"\n"); + else + printf("ssl_version=\\"ok\\"\n"); +#endif + return (0); + } +EOF + + ac_save_CPPFLAGS=$CPPFLAGS + if test "$ac_ssl_includes" != "/usr/include"; then + CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" + fi + + if AC_TRY_EVAL(ac_link); then + + if eval `./conftest 2>&5`; then + if test $ssl_version = error; then + AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) + else + if test $ssl_version = old; then + AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) + have_ssl=no + fi + fi + ac_cv_ssl_version="ssl_version=$ssl_version" + else + AC_MSG_ERROR([Your system couldn't run a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + + else + AC_MSG_ERROR([Your system couldn't link a small SSL test program. + Check config.log, and if you can't figure it out, send a mail to + David Faure , attaching your config.log]) + fi + CPPFLAGS=$ac_save_CPPFLAGS + + ]) + + eval "$ac_cv_ssl_version" + AC_MSG_RESULT($ssl_version) +fi + +if test "$have_ssl" != yes; then + LIBSSL=""; +else + AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) + ac_cv_have_ssl="have_ssl=yes \ + ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" + + + ssl_libraries="$ac_ssl_libraries" + ssl_includes="$ac_ssl_includes" + + if test "$ac_ssl_rsaref" = yes; then + LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" + fi + + if test $ssl_version = "old"; then + AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) + fi +fi + +SSL_INCLUDES= + +if test "$ssl_includes" = "/usr/include"; then + if test -f /usr/kerberos/include/krb5.h; then + SSL_INCLUDES="-I/usr/kerberos/include" + fi +elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then + SSL_INCLUDES="-I$ssl_includes" +fi + +if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then + SSL_LDFLAGS="" +else + SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" +fi + +AC_SUBST(SSL_INCLUDES) +AC_SUBST(SSL_LDFLAGS) +AC_SUBST(LIBSSL) +]) + +AC_DEFUN([KDE_CHECK_STRLCPY], +[ + AC_REQUIRE([AC_CHECK_STRLCAT]) + AC_REQUIRE([AC_CHECK_STRLCPY]) + AC_CHECK_SIZEOF(size_t) + AC_CHECK_SIZEOF(unsigned long) + + AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) + AC_TRY_COMPILE(,[ + #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG + choke me + #endif + ],AC_MSG_RESULT([yes]),[ + AC_MSG_RESULT(no) + AC_MSG_ERROR([ + Apparently on your system our assumption sizeof size_t == sizeof unsigned long + does not apply. Please mail kde-devel@kde.org with a description of your system! + ]) + ]) +]) + +AC_DEFUN([KDE_CHECK_BINUTILS], +[ + AC_MSG_CHECKING([if ld supports unversioned version maps]) + + kde_save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" + echo "{ local: extern \"C++\" { foo }; };" > conftest.map + AC_TRY_LINK([int foo;], +[ +#ifdef __INTEL_COMPILER +icc apparently does not support libtools version-info and version-script +at the same time. Dunno where the bug is, but until somebody figured out, +better disable the optional version scripts. +#endif + + foo = 42; +], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) + LDFLAGS="$kde_save_LDFLAGS" + rm -f conftest.map + AM_CONDITIONAL(include_VERSION_SCRIPT, + [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) + + AC_MSG_RESULT($kde_supports_versionmaps) +]) + +AC_DEFUN([AM_PROG_OBJC],[ +AC_CHECK_PROGS(OBJC, gcc, gcc) +test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) +if test "x${OBJCFLAGS-unset}" = xunset; then + OBJCFLAGS="-g -O2" +fi +AC_SUBST(OBJCFLAGS) +_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) +]) + +AC_DEFUN([KDE_CHECK_PERL], +[ + KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ + AC_MSG_ERROR([No Perl found in your $PATH. +We need perl to generate some code.]) + ]) + AC_SUBST(PERL) +]) diff --git a/admin/am_edit b/admin/am_edit new file mode 100644 index 0000000..dc7160f --- /dev/null +++ b/admin/am_edit @@ -0,0 +1,2442 @@ +#!/usr/bin/perl -w + +# Expands the specialised KDE tags in Makefile.in to (hopefully) valid +# make syntax. +# When called without file parameters, we work recursively on all Makefile.in +# in and below the current subdirectory. When called with file parameters, +# only those Makefile.in are changed. +# The currently supported tags are +# +# {program}_METASOURCES +# where you have a choice of two styles +# {program}_METASOURCES = name1.moc name2.moc ... [\] +# {program}_METASOURCES = AUTO +# The second style requires other tags as well. +# +# To install icons : +# KDE_ICON = iconname iconname2 ... +# KDE_ICON = AUTO +# +# For documentation : +# http://developer.kde.org/documentation/other/developer-faq.html +# +# and more new tags TBD! +# +# The concept (and base code) for this program came from automoc, +# supplied by the following +# +# Matthias Ettrich (The originator) +# Kalle Dalheimer (The original implementator) +# Harri Porten +# Alex Zepeda +# David Faure +# Stephan Kulow +# Dirk Mueller + +use Cwd; +use File::Find; +use File::Basename; + +# Prototype the functions +sub initialise (); +sub processMakefile ($); +sub updateMakefile (); +sub restoreMakefile (); + +sub removeLine ($$); +sub appendLines ($); +sub substituteLine ($$); + +sub findMocCandidates (); +sub pruneMocCandidates ($); +sub checkMocCandidates (); +sub addMocRules (); +sub findKcfgFile($); + +sub tag_AUTOMAKE (); +sub tag_META_INCLUDES (); +sub tag_METASOURCES (); +sub tag_POFILES (); +sub tag_DOCFILES (); +sub tag_LOCALINSTALL(); +sub tag_IDLFILES(); +sub tag_UIFILES(); +sub tag_KCFGFILES(); +sub tag_SUBDIRS(); +sub tag_ICON(); +sub tag_CLOSURE(); +sub tag_NO_UNDEFINED(); +sub tag_NMCHECK(); +sub tag_DIST(); +sub tag_KDEINIT(); + +# Some global globals... +$verbose = 0; # a debug flag +$thisProg = "$0"; # This programs name +$topdir = cwd(); # The current directory +@makefiles = (); # Contains all the files we'll process +@foreignfiles = (); +$start = (times)[0]; # some stats for testing - comment out for release +$version = "v0.2"; +$errorflag = 0; +$cppExt = "(cpp|cc|cxx|C|c\\+\\+)"; +$hExt = "(h|H|hh|hxx|hpp|h\\+\\+)"; +$progId = "KDE tags expanded automatically by " . basename($thisProg); +$automkCall = "\n"; +$printname = ""; # used to display the directory the Makefile is in +$use_final = 1; # create code for --enable-final +$cleantarget = "clean"; +$dryrun = 0; +$pathoption = 0; +$foreign_libtool = 0; + +while (defined ($ARGV[0])) +{ + $_ = shift; + if (/^--version$/) + { + print STDOUT "\n"; + print STDOUT basename($thisProg), " $version\n", + "This is really free software, unencumbered by the GPL.\n", + "You can do anything you like with it except sueing me.\n", + "Copyright 1998 Kalle Dalheimer \n", + "Concept, design and unnecessary questions about perl\n", + " by Matthias Ettrich \n\n", + "Making it useful by Stephan Kulow and\n", + "Harri Porten \n", + "Updated (Feb-1999), John Birch \n", + "Fixes and Improvements by Dirk Mueller \n", + "Current Maintainer Stephan Kulow\n\n"; + exit 0; + } + elsif (/^--verbose$|^-v$/) + { + $verbose = 1; # Oh is there a problem...? + } + elsif (/^(?:-p|--path=)(.+)$/) + { + my $p = $1; + $thisProg = $p . "/". basename($thisProg); + warn ("$thisProg doesn't exist\n") if (!(-f $thisProg)); + $thisProg .= " -p".$p; + $pathoption=1; + } + elsif (/^--help$|^-h$/) + { + print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n", + "\n", + "Patches dir/Makefile.in generated by automake\n", + "(where dir can be an absolute or relative directory name)\n", + "\n", + " -v, --verbose verbosely list files processed\n", + " -h, --help print this help, then exit\n", + " --version print version number, then exit\n", + " -p, --path= use the path to am_edit if the path\n", + " called from is not the one to be used\n", + " --no-final don't patch for --enable-final\n"; + + exit 0; + } + elsif (/^--no-final$/) + { + $use_final = 0; + $thisProg .= " --no-final"; + } + elsif (/^--foreign-libtool$/) + { + $foreign_libtool = 1; + $thisProg .= " --foreign-libtool"; + } + elsif (/^-n$/) + { + $dryrun = 1; + } + else + { + # user selects what input files to check + # add full path if relative path is given + $_ = cwd()."/".$_ if (! /^\//); + print "User wants $_\n" if ($verbose); + push (@makefiles, $_); + } +} + +if ($thisProg =~ /^\// && !$pathoption ) +{ + print STDERR "Illegal full pathname call performed...\n", + "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n", + "Please use option --path.\n"; + exit 1; +} + +# Only scan for files when the user hasn't entered data +if (!@makefiles) +{ + print STDOUT "Scanning for Makefile.in\n" if ($verbose); + find (\&add_makefile, cwd()); + #chdir('$topdir'); +} else { + print STDOUT "Using input files specified by user\n" if ($verbose); +} + +foreach $makefile (sort(@makefiles)) +{ + processMakefile ($makefile); + last if ($errorflag); +} + +# Just some debug statistics - comment out for release as it uses printf. +printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose); + +exit $errorflag; # causes make to fail if erroflag is set + +#----------------------------------------------------------------------------- + +# In conjunction with the "find" call, this builds the list of input files +sub add_makefile () +{ + push (@makefiles, $File::Find::name) if (/Makefile.in$/); +} + +#----------------------------------------------------------------------------- + +# Processes a single make file +# The parameter contains the full path name of the Makefile.in to use +sub processMakefile ($) +{ + # some useful globals for the subroutines called here + local ($makefile) = @_; + local @headerdirs = ('.'); + local $haveAutomocTag = 0; + local $MakefileData = ""; + + local $cxxsuffix = "KKK"; + + local @programs = (); # lists the names of programs and libraries + local $program = ""; + + local @kdeinits = (); # lists the kdeinit targets + + local %realObjs = (); # lists the objects compiled into $program + local %sources = (); # lists the sources used for $program + local %finalObjs = (); # lists the objects compiled when final + local %realname = (); # the binary name of program variable + local %idlfiles = (); # lists the idl files used for $program + local %globalmocs = ();# list of all mocfiles (in %mocFiles format) + local %important = (); # list of files to be generated asap + local %uiFiles = (); + local %kcfgFiles = (); + + local $allidls = ""; + local $idl_output = "";# lists all idl generated files for cleantarget + local $ui_output = "";# lists all uic generated files for cleantarget + local $kcfg_output = "";# lists all kcfg generated files for cleantarget + + local %dependmocs = (); + + local $metasourceTags = 0; + local $dep_files = ""; + local $dep_finals = ""; + local %target_adds = (); # the targets to add + local %rule_adds = (); + local $kdelang = ""; + local @cleanfiles = (); + local $cleanMoc = ""; + local $closure_output = ""; + + local %varcontent = (); + + $makefileDir = dirname($makefile); + chdir ($makefileDir); + $printname = $makefile; + $printname =~ s/^\Q$topdir\E\///; + $makefile = basename($makefile); + + print STDOUT "Processing makefile $printname\n" if ($verbose); + + # Setup and see if we need to do this. + return if (!initialise()); + + tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in + tag_META_INCLUDES (); # Supplies directories for src locations + + foreach $program (@programs) { + $sources_changed{$program} = 0; + $dependmocs{$program} = ""; + $important{$program} = ""; + tag_IDLFILES(); # Sorts out idl rules + tag_NO_UNDEFINED(); + tag_CLOSURE(); + tag_NMCHECK(); + tag_UIFILES(); # Sorts out ui rules + tag_KCFGFILES(); # Sorts out kcfg rules + tag_METASOURCES (); # Sorts out the moc rules + if ($sources_changed{$program}) { + my $lookup = $program . '_SOURCES\s*=[ \t]*(.*)'; + + if($program =~ /libkdeinit_(.*)/) { + my $prog = $1; + substituteLine($prog . '_SOURCES\s*=[ \t]*(.*)', + "${prog}_SOURCES = ${prog}_dummy.$cxxsuffix\n" . + "libkdeinit_${prog}_SOURCES = " . $sources{$program}); + $sources{$prog} = "${prog}_dummy.$cxxsuffix"; + } + else { + substituteLine($lookup, "$program\_SOURCES=" . $sources{$program}); + } + } + if ($important{$program}) { + local %source_dict = (); + for $source (split(/[\034\s]+/, $sources{$program})) { + $source_dict{$source} = 1; + } + for $source (@cleanfiles) { + $source_dict{$source} = 0; + } + for $source (keys %source_dict) { + next if (!$source); + if ($source_dict{$source}) { + # sanity check + if (! -f $source) { + print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n"; + } else { + $target_adds{"\$(srcdir)/$source"} .= $important{$program}; + } + } + } + } + } + if ($cleanMoc) { + # Always add dist clean tag + # Add extra *.moc.cpp files created for USE_AUTOMOC because they + # aren't included in the normal *.moc clean rules. + appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources "; + } + + tag_DIST() unless ($kdeopts{"noautodist"}); + + if ($idl_output) { + appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-idl "; + } + + if ($ui_output) { + appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-ui "; + } + + if ($kcfg_output) { + appendLines ("$cleantarget-kcfg:\n\t-rm -f $kcfg_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-kcfg "; + } + + if ($closure_output) { + appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-closures "; + } + + if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) { + $kdelang = '$(KDE_LANG)' + } else { + $kdelang = ''; + } + + tag_POFILES (); # language rules for po directory + tag_DOCFILES (); # language rules for doc directories + tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs + tag_ICON(); + tag_SUBDIRS(); + + my $tmp = "force-reedit:\n"; + $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n"; + appendLines($tmp); + + make_bcheck_target(); + make_meta_classes(); + tag_COMPILE_FIRST(); + tag_FINAL() if (!$kdeopts{"nofinal"}); + + my $final_lines = "final:\n\t\$(MAKE) "; + my $final_install_lines = "final-install:\n\t\$(MAKE) "; + my $nofinal_lines = "no-final:\n\t\$(MAKE) "; + my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) "; + + foreach $program (@programs) { + my $lookup = $program . '_OBJECTS\s*=[ \t]*.*'; + my $new = ""; + my @list = split(/[\034\s]+/, $realObjs{$program}); + if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) { + $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program}; + $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program}; + $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)"; + $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)"; + + $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; + $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; + $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" "; + $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" "; + } else { + $new = "$program\_OBJECTS = " . $realObjs{$program}; + } + if($MakefileData =~ m/\n$lookup/) { + substituteLine ($lookup, $new); + } + else { + appendLines("$new\n"); + } + } + appendLines($final_lines . "all-am\n"); + appendLines($final_install_lines . "install-am\n"); + appendLines($nofinal_lines . "all-am\n"); + appendLines($nofinal_install_lines . "install-am\n"); + + my $lookup = '(\@\S+\@)?DEP_FILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + my $condition = $1; + my $depfiles = $2; + my $workfiles; + + if ($dep_finals) { + # Add the conditions on every line, since + # there may be line continuations in the list. + $workfiles = "$dep_files $dep_finals $depfiles"; + $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_TRUE\@\t/g; + $lines = "$condition\@KDE_USE_FINAL_TRUE\@DEP_FILES = $workfiles\n"; + $workfiles = "$dep_files $depfiles"; + $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_FALSE\@\t/g; + $lines .= "$condition\@KDE_USE_FINAL_FALSE\@DEP_FILES = $workfiles"; + } else { + $workfiles = "$dep_files $depfiles"; + $workfiles =~ s/\034/\034$condition\t/g; + $lines = $condition . "DEP_FILES = $workfiles"; + } + substituteLine($lookup, $lines); + } + + # new recursive targets + $target_adds{ "nmcheck" } .= ""; # always create nmcheck target + $target_adds{ "nmcheck-am" } .= "nmcheck"; + $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive bcheck-recursive"); + } + + my $cvs_lines = "cvs-clean:\n"; + $cvs_lines .= "\t\$(MAKE) admindir=\$(top_srcdir)/admin -f \$(top_srcdir)/admin/Makefile.common cvs-clean\n"; + appendLines($cvs_lines); + + $cvs_lines = "kde-rpo-clean:\n"; + $cvs_lines .= "\t-rm -f *.rpo\n"; + appendLines($cvs_lines); + $target_adds{"clean"} .= "kde-rpo-clean "; + + my %target_dels = ("install-data-am" => ""); + + # some strange people like to do a install-exec, and expect that also + # all modules are installed. automake doesn't know this, so we need to move + # this here from install-data to install-exec. + if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) { +# $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES "; +# don't use $target_adds here because we need to append the dependency, not +# prepend it. Fixes #44342 , when a module depends on a lib in the same dir +# and libtool needs it during relinking upon install (Simon) + my $lookup = "install-exec-am:([^\n]*)"; + if($MakefileData =~ /\n$lookup\n/) { + substituteLine("$lookup", "install-exec-am: $1 install-kde_moduleLTLIBRARIES"); + } + $target_dels{"install-data-am"} .= "install-kde_moduleLTLIBRARIES "; + $target_adds{"install-data-am"} .= " "; + } + + my $lines = ""; + + foreach $add (keys %target_adds) { + my $lookup = quotemeta($add) . ':([^\n]*)'; + if ($MakefileData =~ /\n$lookup\n/) { + my $newlines = $1; + my $oldlines = $lookup; + if (defined $target_dels{$add}) { + foreach $del (split(' ', $target_dels{$add})) { + $newlines =~ s/\s*$del\s*/ /g; + } + } + substituteLine($oldlines, "$add: " . $target_adds{$add} . $newlines); + } else { + $lines .= "$add: " . $target_adds{$add} . "\n"; + } + } + + appendLines($lines) if ($lines); + + $lines = join("\n", values %rule_adds); + appendLines($lines) if ($lines); + + my $found = 1; + + while ($found) { + if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) { + my $stuff_before = $1; + my $stuff_after = $2; + my $lookup = quotemeta("$1\$(CXXFLAGS)$2"); + my $replacement = "$1\$(KCXXFLAGS)$2"; + $MakefileData =~ s/$lookup/$replacement/; + $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/; + $replacement = "$stuff_before\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$stuff_after"; + substituteLine($lookup, $replacement); + } else { + $found = 0; + } + } + + if($foreign_libtool == 0) { + $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))'; + + if ($MakefileData =~ m/$lookup/ ) { + $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; + } + + $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)'; + if ($MakefileData =~ m/$lookup/ ) { + $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; + } + } + + $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g; + + $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)'; + if ($MakefileData =~ m/\n$lookup\n/) { + substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2"); + } + + # Always update the Makefile.in + updateMakefile (); + return; +} + +#----------------------------------------------------------------------------- + +# Beware: This procedure is not complete. E.g. it also parses lines +# containing a '=' in rules (for instance setting shell vars). For our +# usage this us enough, though. +sub read_variables () +{ + while ($MakefileData =~ /\n\s*(\S+)\s*=([^\n]*)/g) { + $varcontent{$1} = $2; + } +} + +# Check to see whether we should process this make file. +# This is where we look for tags that we need to process. +# A small amount of initialising on the tags is also done here. +# And of course we open and/or create the needed make files. +sub initialise () +{ + if (! -r "Makefile.am") { + print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose); + return 0; + } + + # Checking for files to process... + + open (FILEIN, $makefile) || die "Can't open $makefileDir/$makefile: $!\n"; + # perl bug in 5.8.0: in utf8 mode it badly screws up + binmode(FILEIN, ":bytes") if ($] >= 5.008); + # Read the file + # stat(FILEIN)[7] might look more elegant, but is slower as it + # requires stat'ing the file + seek(FILEIN, 0, 2); + my $fsize = tell(FILEIN); + seek(FILEIN, 0, 0); + read FILEIN, $MakefileData, $fsize; + close FILEIN; + print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d); + + # Remove the line continuations, but keep them marked + # Note: we lose the trailing spaces but that's ok. + # Don't mangle line-leading spaces (usually tabs) + # since they're important. + $MakefileData =~ s/\\\s*\n/\034/g; + + # If we've processed the file before... + restoreMakefile () if ($MakefileData =~ /$progId/); + + foreach $dir (@foreignfiles) { + if (substr($makefileDir,0,length($dir)) eq $dir) { + return 0; + } + } + + %kdeopts = (); + $kdeopts{"foreign"} = 0; + $kdeopts{"qtonly"} = 0; + $kdeopts{"noautodist"} = 0; + $kdeopts{"foreign-libtool"} = $foreign_libtool; + $kdeopts{"nofinal"} = !$use_final; # default + + read_variables(); + + if ($MakefileData =~ /\nKDE_OPTIONS\s*=[ \t]*([^\n]*)\n/) { + my $kde_options_str = $1; + local @kde_options = split(/[\034\s]+/, $kde_options_str); + if (grep(/^foreign$/, @kde_options)) { + push(@foreignfiles, $makefileDir . "/"); + return 0; # don't touch me + } + for $opt (@kde_options) { + if (!defined $kdeopts{$opt}) { + print STDERR "Warning: unknown option $opt in $printname\n"; + } else { + $kdeopts{$opt} = 1; + } + } + } + + # Look for the tags that mean we should process this file. + $metasourceTags = 0; + $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g); + + my $pofileTag = 0; + $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g); + if ($pofileTag > 1) + { + print STDERR "Error: Only one POFILES tag allowed\n"; + $errorflag = 1; + } + + while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) { + my $suffixes_str = $1; + my @list=split(' ', $suffixes_str); + foreach $ext (@list) { + if ($ext =~ /^\.$cppExt$/) { + $cxxsuffix = $ext; + $cxxsuffix =~ s/\.//g; + print STDOUT "will use suffix $cxxsuffix\n" if ($verbose); + last; + } + } + } + + tag_KDEINIT(); + + while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[\034 \t]*([^\n]*)\n/g) { + + my $program = $1; + my $objs = $2; # safe them + + my $ocv = 0; + + my @objlist = split(/[\034\s]+/, $objs); + foreach $obj (@objlist) { + if ($obj =~ /(\S*)\$\((\S+)\)/ ) { + my $pre = $1; + my $variable = $2; + if ($pre eq '' && exists($varcontent{$variable})) { + my @addlist = split(/[\034\s]+/, $varcontent{$variable}); + push(@objlist, @addlist); + } elsif ($variable !~ 'OBJEXT') { + $ocv = 1; + } + } + } + + next if ($ocv); + next if ($program =~ /^am_libkdeinit_/); + + $program =~ s/^am_// if ($program =~ /^am_/); + + my $sourceprogram = $program; + $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/); + + print STDOUT "found program $program\n" if ($verbose); + push(@programs, $program); + + $realObjs{$program} = $objs; + + if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=[ \t]*(.*)\n/) { + $sources{$program} = $1; + } + else { + $sources{$program} = ""; + print STDERR "found program with no _SOURCES: $program\n"; + } + + my $realprogram = $program; + $realprogram =~ s/_/./g; # unmask to regexp + if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) { + $realname{$program} = $1; + } else { + # not standard Makefile - nothing to worry about + $realname{$program} = ""; + } + } + + my $lookup = 'DEPDIR\s*=.*'; + if ($MakefileData !~ /\n$lookup/) { + $lookup = 'bindir\s*=[ \t]*.*'; + substituteLine($lookup, "DEPDIR = .deps\n$1") if ($MakefileData =~ /\n($lookup)/); + } + + my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES'); + foreach $mark (@marks) { + while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { + my $clean_str = $2; + foreach $file (split('[\034\s]+', $clean_str)) { + $file =~ s/\.\///; + push(@cleanfiles, $file); + } + } + } + + my $localTag = 0; + $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/); + + return (!$errorflag); +} + +#----------------------------------------------------------------------------- + +# Gets the list of user defined directories - relative to $srcdir - where +# header files could be located. +sub tag_META_INCLUDES () +{ + my $lookup = '[^=\n]*META_INCLUDES\s*=[ \t]*(.*)'; + return 1 if ($MakefileData !~ /($lookup)\n/); + print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose); + + my $headerStr = $2; + removeLine ($lookup, $1); + + my @headerlist = split(/[\034\s]+/, $headerStr); + + foreach $dir (@headerlist) + { + $dir =~ s#\$\(srcdir\)#.#; + if (! -d $dir) + { + print STDERR "Warning: $dir can't be found. ", + "Must be a relative path to \$(srcdir)\n"; + } + else + { + push (@headerdirs, $dir); + } + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub tag_FINAL() +{ + my @final_names = (); + + foreach $program (@programs) { + + if ($sources{$program} =~ /\(/) { + print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose); + next; + } + + my $mocs = ""; # Moc files (in this program) + my $moc_cpp_added = 0; # If we added some .moc.cpp files, due to + # no other .cpp file including the .moc one. + + my @progsources = split(/[\034\s]+/, $sources{$program}); + my %shash = (); + @shash{@progsources} = 1; # we are only interested in the existence + my %sourcelist = (); + my %extradeps = (); + + foreach $source (@progsources) { + my $suffix = $source; + $suffix =~ s/^.*\.([^\.]+)$/$1/; + + $sourcelist{$suffix} .= "$source "; + } + foreach my $mocFile (keys (%globalmocs)) + { + my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); + if (defined ($cppFile)) { + $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; + } else { + $sourcelist{$cxxsuffix} .= "$mocFile.moc.$cxxsuffix "; + $moc_cpp_added = 1; + } + } + + # scan for extra given dependencies and add them to our target + while ($MakefileData =~ /\n\s*(\S+)\.(?:lo|o)\s*:([^\n]*)/g) { + $extradeps{$1} = $2; + } + + foreach $suffix (keys %sourcelist) { + # See if this file contains c++ code. (i.e., just check the file's suffix against c++ extensions) + my $suffix_is_cxx = 0; + if($suffix =~ /($cppExt)$/) { + $cxxsuffix = $1; + $suffix_is_cxx = 1; + } + + my $mocfiles_in = ($suffix eq $cxxsuffix) && $moc_cpp_added; + + my @sourcelist = split(/[\034\s]+/, $sourcelist{$suffix}); + + if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) { + + # we support IDL on our own + if ($suffix eq "skel" || $suffix =~ /^stub/ + || $suffix =~ /^signals/ # obsolete, remove in KDE-4 + || $suffix eq "h" || $suffix eq "ui" + || $suffix eq "kcfgc" ) { + next; + } + + foreach $file (@sourcelist) { + $file =~ s/\Q$suffix\E$//; + + $finalObjs{$program} .= $file; + if ($program =~ /_la$/) { + $finalObjs{$program} .= "lo "; + } else { + $finalObjs{$program} .= "o "; + } + } + next; # suffix + } + + my $source_deps = ""; + foreach $source (@sourcelist) { + if (-f $source) { + $source_deps .= " \$(srcdir)/$source"; + } else { + $source_deps .= " $source"; + } + my $plainsource = $source; + $plainsource =~ s/\.$cppExt$//; + $source_deps .= " " . $extradeps{$plainsource} if (exists($extradeps{$plainsource})); + } + + $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in" . $source_deps . " " . join(' ', $mocs) . "\n"; + $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n"; + $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n"; + $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n"; + $handling .= "\tfor file in " . $sourcelist{$suffix} . "; do \\\n"; + $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n"; + $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n"; + $handling .= "\tdone; \\\n"; + $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n"; + $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n"; + + appendLines($handling); + + push(@final_names, "$program.all_$suffix.$suffix"); + my $finalObj = "$program.all_$suffix."; + if ($program =~ /_la$/) { + $finalObj .= "lo"; + } else { + $finalObj .= "o"; + } + $finalObjs{$program} .= $finalObj . " "; + } + } + + if (!$kdeopts{"nofinal"} && @final_names >= 1) { + # add clean-final target + my $lines = "$cleantarget-final:\n"; + $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names); + appendLines($lines); + $target_adds{"$cleantarget-am"} .= "$cleantarget-final "; + + foreach $finalfile (@final_names) { + $finalfile =~ s/\.[^.]*$/.P/; + $dep_finals .= " \$(DEPDIR)/$finalfile"; + } + } +} + +sub tag_KDEINIT() +{ + my @progs = (); + my $ltlibs = ""; + my $lookup = 'kdeinit_LTLIBRARIES\s*=[ \t]*(.*)'; + + if ($MakefileData =~ m/\n$lookup/) { + @kdeinits = split(/[\034\s]+/, $1); + my $lines = ""; + foreach my $kdeinit (@kdeinits) { + if ($kdeinit =~ m/\.la$/) { + $kdeinit =~ s/\.la$//; + push(@progs, $kdeinit); + + $lines .= "\n${kdeinit}.la.$cxxsuffix:\n"; + $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' > ${kdeinit}.la.$cxxsuffix; \\\n"; + $lines .= "\techo 'int main(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}.la.$cxxsuffix\n"; + + $lines .= "\n${kdeinit}_dummy.$cxxsuffix:\n"; + $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' > ${kdeinit}_dummy.$cxxsuffix; \\\n"; + $lines .= "\techo 'extern \"C\" int kdeinitmain(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}_dummy.$cxxsuffix\n"; + + push(@cleanfiles, "${kdeinit}.la.$cxxsuffix"); + push(@cleanfiles, "${kdeinit}_dummy.$cxxsuffix"); + + # add dependency + $dep_files .= " \$(DEPDIR)/${kdeinit}.la.Po" if($dep_files !~/${kdeinit}.la.Po/ ); + $dep_files .= " \$(DEPDIR)/${kdeinit}_dummy.Plo" if($dep_files !~/${kdeinit}_dummy.Plo/ ); + + # make library + $lookup = $kdeinit . '_la_LIBADD\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libadd = $1; + substituteLine($lookup, "${kdeinit}_la_LIBADD = libkdeinit_${kdeinit}.la"); + appendLines("libkdeinit_${kdeinit}_la_LIBADD = $libadd\n"); + } + appendLines("libkdeinit_${kdeinit}_la_LDFLAGS = -no-undefined -avoid-version \$(all_libraries)\n"); + + # add library dependencies + $lookup = $kdeinit . '_la_DEPENDENCIES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libdeps = $1; + substituteLine($lookup, "${kdeinit}_la_DEPENDENCIES = libkdeinit_${kdeinit}.la"); + appendLines("libkdeinit_${kdeinit}_la_DEPENDENCIES = $libdeps\n"); + } + + # make library objects + $lookup = "am_${kdeinit}_la_OBJECTS" . '\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $libobjects = $1; + substituteLine($lookup, "am_${kdeinit}_la_OBJECTS = ${kdeinit}_dummy.lo"); + appendLines("am_libkdeinit_${kdeinit}_la_OBJECTS = $libobjects\n"); + my $prog = "libkdeinit_${kdeinit}_la"; + push(@programs, $prog); + $realObjs{$prog} = $libobjects; + $realname{$prog} = "libkdeinit_${kdeinit}.la"; + } + $target_adds{"libkdeinit_${kdeinit}.la"} = "\$(libkdeinit_${kdeinit}_la_OBJECTS) \$(libkdeinit_${kdeinit}_la_DEPENDENCIES)\n" . + "\t\$(CXXLINK) -rpath \$(libdir) \$(libkdeinit_${kdeinit}_la_LDFLAGS) ". + "\$(libkdeinit_${kdeinit}_la_OBJECTS) " . + "\$(libkdeinit_${kdeinit}_la_LIBADD) " . + "\$(LIBS)\n"; + + # make libkdeinit sources + $lookup = $kdeinit . '_la_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $sources_changed{"libkdeinit_${kdeinit}_la"} = 1; + $sources{"libkdeinit_${kdeinit}_la"} = $srces; + } + + # make libkdeinit metasources + $lookup = $kdeinit . '_la_METASOURCES\s*=[ \t]*(.*)'; + substituteLine($lookup, "libkdeinit_${kdeinit}_la_METASOURCES = $1") + if($MakefileData =~ m/\n$lookup/); + +=cut + # make binary sources + $lookup = $kdeinit. '_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + substituteLine($lookup, "${kdeinit}_SOURCES = ${kdeinit}.la.$cxxsuffix"); + $lookup = 'SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; + $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; + substituteLine($lookup, "SOURCES = $srces"); + } + $lookup = 'DIST_SOURCES\s*=[ \t](.*)'; + if($MakefileData =~ m/\n$lookup/) { + my $srces = $1; + $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; + $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; + substituteLine($lookup, "DIST_SOURCES = $srces"); + } + } + + # make binary objects / libs + $lookup = $kdeinit . '_OBJECTS\s*=[ \t]*.*'; + if($MakefileData =~ m/\n$lookup/) { + $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; + substituteLine("${kdeinit}_LDFLAGS\\s*=.*", "${kdeinit}_LDFLAGS = \$(all_libraries)"); + substituteLine("${kdeinit}_LDADD\\s*=.*", "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la"); + substituteLine("${kdeinit}_DEPENDENCIES\\s*=.*", "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la"); + } +=cut + # add binary + push(@programs, $kdeinit); + $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; + $realname{$kdeinit} = $kdeinit; + $sources{$kdeinit} = "${kdeinit}.la.$cxxsuffix"; + + $lines .= "${kdeinit}_LDFLAGS = \$(KDE_RPATH) -no-undefined \$(all_libraries)\n"; + $lines .= "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la\n"; + $lines .= "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la\n"; + + $target_adds{"${kdeinit}\$(EXEEXT)"} = + "\$(${kdeinit}_OBJECTS) \$(${kdeinit}_DEPENDENCIES)\n" . + "\t\@rm -f ${kdeinit}\$(EXEEXT)\n" . + "\t\$(CXXLINK) \$(${kdeinit}_LDFLAGS) \$(${kdeinit}_OBJECTS) \$(${kdeinit}_LDADD) \$(LIBS)\n"; + + $ltlibs .= " libkdeinit_${kdeinit}.la"; + } + } + appendLines($lines); + + # add libkdeinit target + $lookup = 'lib_LTLIBRARIES\s*=[ \t]*(.*)'; + if($MakefileData =~ m/\n$lookup/) { + substituteLine($lookup, "lib_LTLIBRARIES = $1 $ltlibs"); + } + else { + print STDERR + "Error: lib_LTLIBRARIES missing in $printname (required for kdeinit_LTLIBRARIES).\n"; + $errorflag = 1; + } + } + + if($#progs >= 0) { + if($MakefileData !~ m/\nbin_PROGRAMS\s*=/) { + print STDERR "Error: bin_PROGRAMS missing in $printname (required for kdeinit_LTLIBRARIES).\n"; + $errorflag = 1; + } + else { + # add our new progs to SOURCES, DIST_SOURCES and bin_PROGRAMS + my $progsources = ""; + my $progexes = ""; + foreach my $p (@progs) { + $progsources .= "\$(${p}_SOURCES) "; + $progexes .= "${p}\$(EXEEXT) "; + } + $lookup = 'SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "SOURCES = $1 $progsources"); + } + $lookup = 'DIST_SOURCES\s*=[ \t]*(.*)'; + if($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "DIST_SOURCES = $1 $progsources"); + } + # bin_PROGRAMS is complicated, as it exists twice, so we do a little + # magic trick here + $lookup = 'PROGRAMS\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "bin_PROGRAMS += $progexes\nPROGRAMS = $1"); + } + } + } +} + +#----------------------------------------------------------------------------- + +sub tag_COMPILE_FIRST() +{ + foreach $program (@programs) { + my $lookup = "$program" . '_COMPILE_FIRST\s*=[ \t]*(.*)'; + if ($MakefileData =~ m/\n$lookup\n/) { + my $compilefirst_str = $1; + my @compilefirst = split(/[\034\s]+/, $compilefirst_str); + my @progsources = split(/[\034\s]+/, $sources{$program}); + my %donesources = (); + foreach $source (@progsources) { + my @deps = (); + my $sdeps = ""; + if (-f $source) { + $sdeps = "\$(srcdir)/$source"; + } else { + $sdeps = "$source"; + } + foreach $depend (@compilefirst) { + next if ($source eq $depend); + # avoid cyclic dependencies + next if defined($donesources{$depend}); + push @deps, $depend; + } + $target_adds{$sdeps} .= join(' ', @deps) . ' ' if (@deps); + $donesources{$source} = 1; + } + } + } +} + +#----------------------------------------------------------------------------- + + +# Organises the list of headers that we'll use to produce moc files +# from. +sub tag_METASOURCES () +{ + local @newObs = (); # here we add to create object files + local @depend = (); # here we add to create moc files + local $mocExt = ".moc"; + local %mocFiles = (); + + my $line = ""; + my $postEqual = ""; + + my $lookup; + my $found = ""; + if ($metasourceTags > 1) { + $lookup = $program . '_METASOURCES\s*=\s*(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + $found = $1; + } else { + $lookup = $program . '_METASOURCES\s*=\s*(.*)'; + if ($MakefileData !~ /\n($lookup)\n/) { + $lookup = 'METASOURCES\s*=\s*(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + $found = $1; + $metasourceTags = 0; # we can use the general target only once + } else { + $found = $1; + } + } + print STDOUT "METASOURCE processing <$found>)\n" if ($verbose); + + $postEqual = $found; + $postEqual =~ s/[^=]*=//; + + removeLine ($lookup, $found); + + # Always find the header files that could be used to "moc" + return 1 if (findMocCandidates ()); + + if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/) + { + print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+); + $mocExt = ".moc.$cxxsuffix"; + $haveAutomocTag = 1; + } + else + { + # Not automoc so read the list of files supplied which + # should be .moc files. + + $postEqual =~ tr/\034/ /; + + # prune out extra headers - This also checks to make sure that + # the list is valid. + pruneMocCandidates ($postEqual); + } + + checkMocCandidates (); + + if (@newObs) { + my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o "; + $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext; + $dependmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix"; + foreach $file (@newObs) { + $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/); + } + } + if (@depend) { + $dependmocs{$program} .= " "; + $dependmocs{$program} .= join('.moc ', @depend) . ".moc"; + $dependmocs{$program} .= " "; + } + addMocRules (); + @globalmocs{keys %mocFiles}=values %mocFiles; +} + +#----------------------------------------------------------------------------- + +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_AUTOMAKE () +{ + my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\)(.*)'; + return 1 if ($MakefileData !~ /\n($lookup)\n/); + print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose); + + my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname"; + + # automake 1.8.x adds another automake call. *sigh* + $newLine =~ s/;([\034\s]+cd\s+\$\(srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\).*)[\034\s]+\&\&[\034\s]+exit[\034\s]+0;([\034\s]+exit\s+1)/; \034 ( $1 ) || exit 1; echo \' cd \$(top_srcdir) && perl $thisProg \'; cd \$(top_srcdir) && perl $thisProg && exit 0; $2/; + substituteLine ($lookup, $newLine); + $automkCall = $1; + + $lookup = '.*cd \$\(srcdir\)\s+&&[\034\s]+\$\(AUTOCONF\)(.*)'; + if ($MakefileData =~ /\n($lookup)\n/) { + $newLine = "\tcd \$(srcdir) && rm -f configure\n"; + $newLine .= "\tcd \$(top_srcdir) && \$(MAKE) -f admin/Makefile.common configure"; + substituteLine ($lookup, $newLine); + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub handle_TOPLEVEL() +{ + my $pofiles = ""; + my @restfiles = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if (-d $entry); + + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/); + + if ($entry =~ /\.po$/) { + next; + } + push(@restfiles, $entry); + } + closedir (THISDIR); + + if (@restfiles) { + $target_adds{"install-data-am"} .= "install-nls-files "; + $lines = "install-nls-files:\n"; + $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n"; + for $file (@restfiles) { + $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; + } + $target_adds{"uninstall"} .= "uninstall-nls-files "; + $lines .= "uninstall-nls-files:\n"; + for $file (@restfiles) { + $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; + } + appendLines($lines); + } + + return 0; +} + +#----------------------------------------------------------------------------- + +sub tag_SUBDIRS () +{ + if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) { + return 1; + } + + my $subdirs = "."; + + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./); + if (-d $entry && -f $entry . "/Makefile.am") { + $subdirs .= " $entry"; + next; + } + } + closedir (THISDIR); + + substituteLine('SUBDIRS\s*=.*', "SUBDIRS =$subdirs"); + return 0; +} + +sub tag_IDLFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my $dep_lines = ""; + my @cppFiles = (); + + foreach $source (@psources) { + my $skel = ($source =~ m/\.skel$/); + my $stub = ($source =~ m/\.stub$/); + my $signals = ($source =~ m/\.signals$/); # obsolete, remove in KDE-4 + + if ($stub || $skel || $signals) { + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.(stub|skel|signals)$//; + my $sourcename; + + if ($skel) { + $sourcename = "$source\_skel"; + } elsif ($stub) { + $sourcename = "$source\_stub"; + } else { + $sourcename = "$source\_signals"; + } + + my $sourcedir = ''; + if (-f "$makefileDir/$source.h") { + $sourcedir = '$(srcdir)/'; + } else { + if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) { + $sourcedir = $1; + $sourcedir .= "/" if ($sourcedir !~ /\/$/); + } + } + + if ($allidls !~ /$source\_kidl/) { + + $use_ng = ($MakefileData =~ /\n$source\_DCOPIDLNG\s*=\s*(\S+)\n/); + $dcopidl = $use_ng ? "KDECONFIG=\"\$(KDECONFIG)\" \$(DCOPIDLNG)" : "\$(DCOPIDL)"; + + $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOP_DEPENDENCIES)\n"; + $dep_lines .= "\t$dcopidl $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; false )\n"; + + $allidls .= $source . "_kidl "; + } + + if ($allidls !~ /$sourcename/) { + + $dep_lines_tmp = ""; + + if ($skel) { + $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n"; + $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n"; + } elsif ($stub) { + $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n"; + } else { # signals - obsolete, remove in KDE 4 + $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n"; + } + + if ($stub || $signals) { + $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h "; + $dep_lines .= "$sourcename.h: $source.kidl\n"; + $dep_lines .= $dep_lines_tmp; + } + + $allidls .= $sourcename . " "; + } + + $idlfiles{$program} .= $sourcename . " "; + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $sourcename.lo"; + } else { + $realObjs{$program} .= " $sourcename.\$(OBJEXT)"; + } + $sources{$program} .= " $sourcename.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$sourcename.h " if (!$skel); + $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl "; + push(@cleanfiles, "$sourcename.$cxxsuffix"); + push(@cleanfiles, "$sourcename.h"); + push(@cleanfiles, "$sourcename.kidl"); + $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/); + } + } + if ($dep_lines) { + appendLines($dep_lines); + } + + if (0) { + my $lookup = "($program)"; + $lookup .= '(|\$\(EXEEXT\))'; + $lookup =~ s/\_/./g; + $lookup .= ":(.*..$program\_OBJECTS..*)"; + # $lookup = quotemeta($lookup); + if ($MakefileData =~ /\n$lookup\n/) { + + my $line = "$1$2: "; + foreach $file (split(' ', $idlfiles{$program})) { + $line .= "$file.$cxxsuffix "; + } + $line .= $3; + substituteLine($lookup, $line); + } else { + print STDERR "no built dependency found $lookup\n"; + } + } +} + +sub tag_UIFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my @depFiles = (); + + foreach $source (@psources) { + + if ($source =~ m/\.ui$/) { + + print STDERR "adding UI file $source\n" if ($verbose); + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.ui$//; + + my $sourcedir = ''; + if (-f "$makefileDir/$source.ui") { + $sourcedir = '$(srcdir)/'; + } + + if (!$uiFiles{$source}) { + + my $dep_lines = "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n"; + $dep_lines .= "\trm -f $source.$cxxsuffix\n"; + if (!$kdeopts{"qtonly"}) { + $dep_lines .= "\techo '#include ' > $source.$cxxsuffix\n"; + $dep_lines .= "\techo '#include ' >> $source.$cxxsuffix\n"; + my ($mangled_source) = $source; + $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage + $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n"; + $dep_lines .= "\t\$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | \$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | \$(PERL) -pe \"s,image([0-9][0-9]*)_data,img\\\$\$1_" . $mangled_source . ",g\" >> $source.$cxxsuffix ;\\\n"; + $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n"; + } else { + $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n"; + } + $dep_lines .= "\tif test \"\$\$ret\" = 0; then echo '#include \"$source.moc\"' >> $source.$cxxsuffix; else rm -f $source.$cxxsuffix ; exit \$\$ret ; fi\n\n"; + $dep_lines .= "$source.h: $sourcedir$source.ui\n"; + $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n\n"; + $dep_lines .= "$source.moc: $source.h\n"; + $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n"; + + $rule_adds{"$source.$cxxsuffix"} = $dep_lines; + + $uiFiles{$source} = 1; + $dependmocs{$program} .= " $source.moc"; + $globalmocs{$source} = "\035$source.h\035$source.cpp"; + } + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $source.lo"; + } else { + $realObjs{$program} .= " $source.\$(OBJEXT)"; + } + $sources{$program} .= " $source.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$source.h "; + $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc "; + push(@cleanfiles, "$source.$cxxsuffix"); + push(@cleanfiles, "$source.h"); + push(@cleanfiles, "$source.moc"); + $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); + } + } +} + +sub tag_KCFGFILES () +{ + my @psources = split(/[\034\s]+/, $sources{$program}); + my @depFiles = (); + + foreach $source (@psources) { + + if ($source =~ m/\.kcfgc$/) { + + print STDERR "adding KCFG file $source\n" if ($verbose); + + my $qs = quotemeta($source); + $sources{$program} =~ s/$qs//; + $sources_changed{$program} = 1; + + $source =~ s/\.kcfgc$//; + + my $sourcedir = ''; + if (-f "$makefileDir/$source.kcfgc") { + $sourcedir = '$(srcdir)/'; + } + + if (!$kcfgFiles{$source}) { + $kcfg = "$program.kcfg"; + findKcfgFile("$source.kcfgc"); + + my $fixsuffix = ""; + $fixsuffix = "else mv $source.cpp $source.$cxxsuffix ; " + unless "cpp" eq $cxxsuffix; + + my $dep_lines = "$source.$cxxsuffix: $source.h\n"; + $dep_lines .= "$source.h: $sourcedir$kcfg $sourcedir$source.kcfgc \$(KCFG_DEPENDENCIES)\n"; + $dep_lines .= "\t\$(KCONFIG_COMPILER) $sourcedir$kcfg $sourcedir$source.kcfgc; ret=\$\$?; \\\n"; + $dep_lines .= "\tif test \"\$\$ret\" != 0; then rm -f $source.h ; exit \$\$ret ; $fixsuffix fi\n\n"; + + $rule_adds{"$source.$cxxsuffix"} = $dep_lines; + + $kcfgFiles{$source} = 1; + } + + if ($program =~ /_la$/) { + $realObjs{$program} .= " $source.lo"; + } else { + $realObjs{$program} .= " $source.\$(OBJEXT)"; + } + $sources{$program} .= " $source.$cxxsuffix"; + $sources_changed{$program} = 1; + $important{$program} .= "$source.h "; + $kcfg_output .= "\\\n\t$source.$cxxsuffix $source.h "; + push(@cleanfiles, "$source.$cxxsuffix"); + push(@cleanfiles, "$source.h"); + $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); + } + } +} + +sub tag_ICON() +{ + my $lookup = '([^\s]*)_ICON\s*=[ \t]*(.*)'; + my $install = ""; + my $uninstall = ""; + + while ($MakefileData =~ /\n$lookup/g) { + my $destdir; + if ($1 eq "KDE") { + $destdir = "kde_icondir"; + } else { + $destdir = $1 . "dir"; + } + my $iconauto = ($2 =~ /AUTO\s*$/); + my @appnames = (); + if ( ! $iconauto ) { + my $appicon_str = $2; + my @_appnames = split(" ", $appicon_str); + print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose); + foreach $appname (@_appnames) { + push(@appnames, quotemeta($appname)); + } + } else { + print STDOUT "KDE_ICON processing \n" if ($verbose); + } + + my @files = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); + next if (! -f $entry); + if ( $iconauto ) + { + push(@files, $entry) + if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/ || $entry =~ /\.svg/); + } else { + foreach $appname (@appnames) { + push(@files, $entry) + if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/ || $entry =~ /-$appname\.svg/); + } + } + } + closedir (THISDIR); + + my %directories = (); + + foreach $file (@files) { + my $newfile = $file; + my $prefix = $file; + $prefix =~ s/\.(png|xpm|mng|svg|svgz)$//; + my $appname = $prefix; + $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; + $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; + $appname = quotemeta($appname); + $prefix =~ s/$appname$//; + $prefix =~ s/-$//; + + $prefix = 'lo16-app' if ($prefix eq 'mini'); + $prefix = 'lo32-app' if ($prefix eq 'lo'); + $prefix = 'hi48-app' if ($prefix eq 'large'); + $prefix .= '-app' if ($prefix =~ m/^...$/); + + my $type = $prefix; + $type =~ s/^.*-([^-]+)$/$1/; + $prefix =~ s/^(.*)-[^-]+$/$1/; + + my %type_hash = + ( + 'action' => 'actions', + 'app' => 'apps', + 'device' => 'devices', + 'filesys' => 'filesystems', + 'mime' => 'mimetypes' + ); + + if (! defined $type_hash{$type} ) { + print STDERR "unknown icon type $type in $printname ($file)\n"; + next; + } + + my %dir_hash = + ( + 'los' => 'locolor/16x16', + 'lom' => 'locolor/32x32', + 'him' => 'hicolor/32x32', + 'hil' => 'hicolor/48x48', + 'lo16' => 'locolor/16x16', + 'lo22' => 'locolor/22x22', + 'lo32' => 'locolor/32x32', + 'hi16' => 'hicolor/16x16', + 'hi22' => 'hicolor/22x22', + 'hi32' => 'hicolor/32x32', + 'hi48' => 'hicolor/48x48', + 'hi64' => 'hicolor/64x64', + 'hi128' => 'hicolor/128x128', + 'hisc' => 'hicolor/scalable', + 'cr16' => 'crystalsvg/16x16', + 'cr22' => 'crystalsvg/22x22', + 'cr32' => 'crystalsvg/32x32', + 'cr48' => 'crystalsvg/48x48', + 'cr64' => 'crystalsvg/64x64', + 'cr128' => 'crystalsvg/128x128', + 'crsc' => 'crystalsvg/scalable' + ); + + $newfile =~ s@.*-($appname\.(png|xpm|mng|svgz|svg?))@$1@; + + if (! defined $dir_hash{$prefix}) { + print STDERR "unknown icon prefix $prefix in $printname\n"; + next; + } + + my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type}; + if ($newfile =~ /-[^\.]/) { + my $tmp = $newfile; + $tmp =~ s/^([^-]+)-.*$/$1/; + $dir = $dir . "/" . $tmp; + $newfile =~ s/^[^-]+-//; + } + + if (!defined $directories{$dir}) { + $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n"; + $directories{$dir} = 1; + } + + $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; + $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; + + } + } + + if (length($install)) { + $target_adds{"install-data-am"} .= "install-kde-icons "; + $target_adds{"uninstall-am"} .= "uninstall-kde-icons "; + appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall); + } +} + +sub handle_POFILES($$) +{ + my @pofiles = split(" ", $_[0]); + my $lang = $_[1]; + + # Build rules for creating the gmo files + my $tmp = ""; + my $allgmofiles = ""; + my $pofileLine = "POFILES ="; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + $tmp .= "$1.gmo: $pofile\n"; + $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n"; + $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n"; + $allgmofiles .= " $1.gmo"; + $pofileLine .= " $1.po"; + } + appendLines ($tmp); + my $lookup = 'POFILES\s*=([^\n]*)'; + if ($MakefileData !~ /\n$lookup/) { + appendLines("$pofileLine\nGMOFILES =$allgmofiles"); + } else { + substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles"); + } + + if ($allgmofiles) { + + # Add the "clean" rule so that the maintainer-clean does something + appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n"); + + $target_adds{"maintainer-clean"} .= "clean-nls "; + + $lookup = 'DISTFILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1"; + substituteLine ($lookup, $tmp); + } + } + + $target_adds{"install-data-am"} .= "install-nls "; + + $tmp = "install-nls:\n"; + if ($lang) { + $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n"; + } + $tmp .= "\t\@for base in "; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + $tmp .= "$1 "; + } + + $tmp .= "; do \\\n"; + if ($lang) { + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; + $tmp .= "\t fi ;\\\n"; + } else { + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n"; + $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; + $tmp .= "\t fi ;\\\n"; + } + $tmp .= "\tdone\n\n"; + appendLines ($tmp); + + $target_adds{"uninstall"} .= "uninstall-nls "; + + $tmp = "uninstall-nls:\n"; + foreach $pofile (@pofiles) + { + $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension + if ($lang) { + $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n"; + } else { + $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n"; + } + } + appendLines($tmp); + + $target_adds{"all"} .= "all-nls "; + + $tmp = "all-nls: \$(GMOFILES)\n"; + + appendLines($tmp); + + $target_adds{"distdir"} .= "distdir-nls "; + + $tmp = "distdir-nls:\$(GMOFILES)\n"; + $tmp .= "\tfor file in \$(POFILES); do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + $tmp .= "\tfor file in \$(GMOFILES); do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + + appendLines ($tmp); + + if (!$lang) { + appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n"); + } + +} + +#----------------------------------------------------------------------------- + +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_POFILES () +{ + my $lookup = 'POFILES\s*=([^\n]*)'; + return 1 if ($MakefileData !~ /\n$lookup/); + print STDOUT "POFILES processing <$1>\n" if ($verbose); + + my $tmp = $1; + + # make sure these are all gone. + if ($MakefileData =~ /\n\.po\.gmo:\n/) + { + print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n"; + return 1; + } + + # Either find the pofiles in the directory (AUTO) or use + # only the specified po files. + my $pofiles = ""; + if ($tmp =~ /^\s*AUTO\s*$/) + { + opendir (THISDIR, "."); + $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR))); + closedir (THISDIR); + print STDOUT "pofiles found = $pofiles\n" if ($verbose); + if (-f "charset" && -f "kdelibs/kdelibs.po") { + handle_TOPLEVEL(); + } + } + else + { + $tmp =~ s/\034/ /g; + $pofiles = $tmp; + } + return 1 if (!$pofiles); # Nothing to do + + handle_POFILES($pofiles, $kdelang); + + return 0; +} + +sub helper_LOCALINSTALL($) +{ + my $lookup = "\035" . $_[0] . " *:[^\035]*\035\t"; + my $copy = $MakefileData; + $copy =~ s/\n/\035/g; + if ($copy =~ /($lookup.*)$/) { + + $install = $1; + $install =~ s/\035$_[0] *:[^\035]*\035//; + my $emptyline = 0; + while (! $emptyline ) { + if ($install =~ /([^\035]*)\035(.*)/) { + local $line = $1; + $install = $2; + if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) { + $emptyline = 1; + } else { + replaceDestDir($line); + } + } else { + $emptyline = 1; + } + } + } + +} + +sub tag_LOCALINSTALL () +{ + helper_LOCALINSTALL('install-exec-local'); + helper_LOCALINSTALL('install-data-local'); + helper_LOCALINSTALL('uninstall-local'); + + return 0; +} + +sub replaceDestDir($) { + local $line = $_[0]; + + if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/ + || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/ + || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/) + { + $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/); + } + + if ($line ne $_[0]) { + $_[0] = quotemeta $_[0]; + substituteLine($_[0], $line); + } +} + +#--------------------------------------------------------------------------- +# libtool is very hard to persuade it could use -Wl,--no-undefined for making +# -no-undefined actually work +# append $(KDE_NO_UNFINED) after every -no-undefined in LDFLAGS +# this may go away if libtool ever does this on its own +sub tag_NO_UNDEFINED () { + return if ($program !~ /_la$/); + + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + return if (!defined($1)); + return if ($1 !~ /CXXLINK/); + + if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ ) { + return; + } + + $lookup = $program . '\_LDFLAGS(\s*)=(.*)-no-undefined(.*)'; + if ($MakefileData =~ /\n$lookup\n/) { + my $replace = $program . "\_LDFLAGS$1=$2-no-undefined \$(KDE_NO_UNDEFINED)$3"; + substituteLine($lookup, $replace); + } +} + +sub tag_CLOSURE () { + return if ($program !~ /_la$/); + + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + return if (!defined($1)); + return if ($1 !~ /CXXLINK/); + + if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ && + $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) { + print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun); + return; + } + + my $closure = $realname{$program} . ".closure"; + my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n"; + $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n"; + $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n"; + $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n"; + $lines .= "\t\@rm -f $program\_closure.* $closure\n"; + $lines .= "\t\@echo \"timestamp\" > $closure\n"; + $lines .= "\n"; + appendLines($lines); + $lookup = $realname{$program} . ": (.*)"; + if ($MakefileData =~ /\n$lookup\n/) { + $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1"; + $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1"; + substituteLine($lookup, $lines); + } + $closure_output .= " $closure"; +} + +sub tag_NMCHECK () { + return if ($program !~ /_la$/); + my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; + $MakefileData =~ m/$lookup/; + my $linkcmd = $1; + return if (!defined($1)); + return if ($linkcmd !~ /CXXLINK/ && $linkcmd !~ /LINK/); + + $lookup = $program . '_NMCHECK\s*=([^\n]*)'; + if( $MakefileData !~ m/\n$lookup\n/ ) { + return; + } + my $allowed = $1; + $allowed =~ s/^ *//; + $lookup = $program . '_NMCHECKWEAK\s*=([^\n]*)'; + my $weak = ""; + my $is_weak = 0; + if( $MakefileData =~ m/\n$lookup\n/ ) { + $weak = $1; + $is_weak = 1; + } + $weak =~ s/^ *//; + + if( $is_weak ) + { + $weak = '--allowweak=\'' . $weak . '\' '; + } + my $nmline = "\@KDE_USE_NMCHECK_TRUE@\t\@\$(MAKE) \$(AM_MAKEFLAGS) nmcheck_$realname{$program} || ( rm -f $realname{$program}; exit 1 )"; + $lookup = '(\t\$\(CXXLINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; + if( $MakefileData =~ /\n$lookup\n/ ) { + my $oldstuff = $1; + substituteLine( $lookup, $oldstuff . "\n" . $nmline ); + } + $lookup = '(\t\$\(LINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; + if( $MakefileData =~ /\n$lookup\n/ ) { + my $oldstuff = $1; + substituteLine( $lookup, $oldstuff . "\n" . $nmline ); + } + $nmline = "\@\$(top_srcdir)/admin/nmcheck $realname{$program} \'$allowed\' $weak"; + appendLines( "\nnmcheck_$realname{$program}: $realname{$program} \n\t$nmline\n" ); + $target_adds{ "nmcheck" } .= "nmcheck_$realname{$program} "; +} + +sub tag_DIST () { + my %foundfiles = (); + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry eq "Makefile" || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); + next if (! -f $entry); + next if ($entry =~ /\.moc/ || $entry =~ /\.moc.$cppExt$/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/); + next if ($entry =~ /\.all_$cppExt\.$cppExt$/); + $foundfiles{$entry} = 1; + } + closedir (THISDIR); + + # doing this for MAINTAINERCLEANFILES would be wrong + my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS'); + foreach $mark (@marks) { + while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { + my $cleanfiles_str = $2; + foreach $file (split('[\034\s]+', $cleanfiles_str)) { + $file =~ s/\.\///; + $foundfiles{$file} = 0 if (defined $foundfiles{$file}); + } + } + } + my @files = ("Makefile", "config.cache", "config.log", "stamp-h", + "stamp-h1", "stamp-h1", "config.h", "Makefile", + "config.status", "config.h", "libtool", "core" ); + foreach $file (@files) { + $foundfiles{$file} = 0 if (defined $foundfiles{$file}); + } + + my $KDE_DIST = ""; + foreach $file (keys %foundfiles) { + if ($foundfiles{$file} == 1) { + $KDE_DIST .= "$file "; + } + } + if ($KDE_DIST) { + print "KDE_DIST $printname $KDE_DIST\n" if ($verbose); + + my $lookup = 'DISTFILES\s*=[ \t]*(.*)'; + if ($MakefileData =~ /\n$lookup/) { + substituteLine($lookup, "DISTFILES = $1 \$(KDE_DIST)"); + appendLines("KDE_DIST=$KDE_DIST\n"); + } + } +} + +#----------------------------------------------------------------------------- +# Returns 0 if the line was processed - 1 otherwise. +# Errors are logged in the global $errorflags +sub tag_DOCFILES () +{ + $target_adds{"all"} .= "docs-am "; + + my $lookup = 'KDE_DOCS\s*=[ \t]*([^\n]*)'; + goto nodocs if ($MakefileData !~ /\n$lookup/); + print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose); + + my $tmp = $1; + + # Either find the files in the directory (AUTO) or use + # only the specified po files. + my $files = ""; + my $appname = $tmp; + $appname =~ s/^(\S*)\s*.*$/$1/; + if ($appname =~ /AUTO/) { + $appname = basename($makefileDir); + if ("$appname" eq "en") { + print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n"; + exit(1); + } + } + + if ($tmp !~ / - /) + { + opendir (THISDIR, "."); + foreach $entry (readdir(THISDIR)) { + next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry eq "core" || $entry eq "index.cache.bz2"); + next if (! -f $entry); + $files .= "$entry "; + } + closedir (THISDIR); + print STDOUT "docfiles found = $files\n" if ($verbose); + } + else + { + $tmp =~ s/\034/ /g; + $tmp =~ s/^\S*\s*-\s*//; + $files = $tmp; + } + goto nodocs if (!$files); # Nothing to do + + if ($files =~ /(^| )index\.docbook($| )/) { + + my $lines = ""; + my $lookup = 'MEINPROC\s*='; + if ($MakefileData !~ /\n($lookup)/) { + $lines = "MEINPROC=/\$(kde_bindir)/meinproc\n"; + } + $lookup = 'KDE_XSL_STYLESHEET\s*='; + if ($MakefileData !~ /\n($lookup)/) { + $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n"; + } + $lookup = '\nindex.cache.bz2:'; + if ($MakefileData !~ /\n($lookup)/) { + $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n"; + $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n"; + $lines .= "\n"; + } + + $lines .= "docs-am: index.cache.bz2\n"; + $lines .= "\n"; + $lines .= "install-docs: docs-am install-nls\n"; + $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $lines .= "\t\@if test -f index.cache.bz2; then \\\n"; + $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\telif test -f \$(srcdir)/index.cache.bz2; then \\\n"; + $lines .= "\techo \$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\t\$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; + $lines .= "\tfi\n"; + $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; + $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; + + $lines .= "\n"; + $lines .= "uninstall-docs:\n"; + $lines .= "\t-rm -rf \$(kde_htmldir)/$kdelang/$appname\n"; + $lines .= "\n"; + $lines .= "clean-docs:\n"; + $lines .= "\t-rm -f index.cache.bz2\n"; + $lines .= "\n"; + $target_adds{"install-data-am"} .= "install-docs "; + $target_adds{"uninstall"} .= "uninstall-docs "; + $target_adds{"clean-am"} .= "clean-docs "; + appendLines ($lines); + } else { + appendLines("docs-am: $files\n"); + } + + $target_adds{"install-data-am"} .= "install-nls "; + $target_adds{"uninstall"} .= "uninstall-nls "; + + $tmp = "install-nls:\n"; + $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; + $tmp .= "\t\@for base in $files; do \\\n"; + $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\tdone\n"; + if ($appname eq 'common') { + $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n"; + $tmp .= "\tif test ! -f \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n"; + $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n"; + $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n"; + $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n"; + $tmp .= "\t case \" $files \" in \\\n"; + $tmp .= "\t *\" \$\$p \"*) ;; \\\n"; + $tmp .= "\t *) test ! -f \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n"; + $tmp .= "\t esac ; \\\n"; + $tmp .= "\tdone ; fi ; true\n"; + } + $tmp .= "\n"; + $tmp .= "uninstall-nls:\n"; + $tmp .= "\tfor base in $files; do \\\n"; + $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; + $tmp .= "\tdone\n\n"; + appendLines ($tmp); + + $target_adds{"distdir"} .= "distdir-nls "; + + $tmp = "distdir-nls:\n"; + $tmp .= "\tfor file in $files; do \\\n"; + $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; + $tmp .= "\tdone\n"; + + appendLines ($tmp); + + return 0; + + nodocs: + appendLines("docs-am:\n"); + return 1; +} + +#----------------------------------------------------------------------------- +# Find headers in any of the source directories specified previously, that +# are candidates for "moc-ing". +sub findMocCandidates () +{ + foreach $dir (@headerdirs) + { + my @list = (); + opendir (SRCDIR, "$dir"); + @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR); + closedir SRCDIR; + foreach $hf (@hFiles) + { + next if ($hf =~ /^\.\#/); + $hf =~ /(.*)\.[^\.]*$/; # Find name minus extension + next if ($uiFiles{$1}); + open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n"; + my $hfsize = 0; + seek(HFIN, 0, 2); + $hfsize = tell(HFIN); + seek(HFIN, 0, 0); + read HFIN, $hfData, $hfsize; + close HFIN; + # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT + # handle " { friend class blah; Q_OBJECT ", but don't match antlarr_Q_OBJECT (\b). + if ( $hfData =~ /{([^}]*)\bQ_OBJECT/s ) { + push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s; ## reject "// Q_OBJECT" + } + } + # The assoc array of root of headerfile and header filename + foreach $hFile (@list) + { + $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension + if ($mocFiles{$1}) + { + print STDERR "Warning: Multiple header files found for $1\n"; + next; # Use the first one + } + $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir + } + } + + return 0; +} + +#----------------------------------------------------------------------------- + +# The programmer has specified a moc list. Prune out the moc candidates +# list that we found based on looking at the header files. This generates +# a warning if the programmer gets the list wrong, but this doesn't have +# to be fatal here. +sub pruneMocCandidates ($) +{ + my %prunedMoc = (); + local @mocList = split(' ', $_[0]); + + foreach $mocname (@mocList) + { + $mocname =~ s/\.moc$//; + if ($mocFiles{$mocname}) + { + $prunedMoc{$mocname} = $mocFiles{$mocname}; + } + else + { + my $print = $makefileDir; + $print =~ s/^\Q$topdir\E\\//; + # They specified a moc file but we can't find a header that + # will generate this moc file. That's possible fatal! + print STDERR "Warning: No moc-able header file for $print/$mocname\n"; + } + } + + undef %mocFiles; + %mocFiles = %prunedMoc; +} + +#----------------------------------------------------------------------------- + +# Finds the cpp files (If they exist). +# The cpp files get appended to the header file separated by \035 +sub checkMocCandidates () +{ + my @cppFiles; + my $cpp2moc; # which c++ file includes which .moc files + my $moc2cpp; # which moc file is included by which c++ files + + return unless (keys %mocFiles); + opendir(THISDIR, ".") || return; + @cppFiles = grep { /.+\.$cppExt$/o && !/.+\.moc\.$cppExt$/o + && !/.+\.all_$cppExt\.$cppExt$/o + && !/^\./ } readdir(THISDIR); + closedir THISDIR; + return unless (@cppFiles); + my $files = join (" ", @cppFiles); + $cpp2moc = {}; + $moc2cpp = {}; + foreach $cxxf (@cppFiles) + { + open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n"; + seek(CXXFIN, 0, 2); + my $cxxfsize = tell(CXXFIN); + seek(CXXFIN, 0, 0); + read CXXFIN, $cxxfData, $cxxfsize; + close CXXFIN; + while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) { + $cpp2moc->{$cxxf}->{$1} = 1; + $moc2cpp->{$1}->{$cxxf} = 1; + } + } + foreach my $mocFile (keys (%mocFiles)) + { + @cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}}; + if (@cppFiles == 1) { + $mocFiles{$mocFile} .= "\035" . $cppFiles[0]; + push(@depend, $mocFile); + } elsif (@cppFiles == 0) { + push (@newObs, $mocFile); # Produce new object file + next if ($haveAutomocTag); # This is expected... + # But this is an error we can deal with - let them know + print STDERR + "Warning: No c++ file that includes $mocFile.moc\n"; + } else { + # We can't decide which file to use, so it's fatal. Although as a + # guess we could use the mocFile.cpp file if it's in the list??? + print STDERR + "Error: Multiple c++ files that include $mocFile.moc\n"; + print STDERR "\t",join ("\t", @cppFiles),"\n"; + $errorflag = 1; + delete $mocFiles{$mocFile}; + # Let's continue and see what happens - They have been told! + } + } +} + +#----------------------------------------------------------------------------- + +# Add the rules for generating moc source from header files +# For Automoc output *.moc.cpp but normally we'll output *.moc +# (We must compile *.moc.cpp separately. *.moc files are included +# in the appropriate *.cpp file by the programmer) +sub addMocRules () +{ + my $cppFile; + my $hFile; + + foreach $mocFile (keys (%mocFiles)) + { + undef $cppFile; + ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3); + $dir =~ s#^\.#\$(srcdir)#; + if (defined ($cppFile)) + { + $cppFile =~ s,\.[^.]*$,,; + $target_adds{"$cppFile.o"} .= "$mocFile.moc "; + $target_adds{"$cppFile.lo"} .= "$mocFile.moc "; + appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n"); + $cleanMoc .= " $mocFile.moc"; + appendLines ("mocs: $mocFile.moc\n"); + } + else + { + appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n"); + $cleanMoc .= " $mocFile$mocExt"; + appendLines ("mocs: $mocFile$mocExt\n"); + } + } +} + +sub make_bcheck_target() +{ + my $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; + my $bcheckdep = "bcheck-am"; + $bcheckdep = "bcheck-recursive" if ($MakefileData =~ /\n$lookup/); + + my $headers= ""; + $headers = $1 if($MakefileData =~ /\nHEADERS\s*=[ \t]*(.+)/); + $headers =~ s/\$\((?:noinst|EXTRA)_HEADERS\)//g; + + $target_adds{"clean-am"} .= "clean-bcheck "; + + my $t = "clean-bcheck: \n" . + "\trm -f *.bchecktest.cc *.bchecktest.cc.class a.out\n\n" . + "bcheck: $bcheckdep\n\n" . + "bcheck-am:\n" . + "\t\@for i in $headers; do \\\n" . + "\t if test \$(srcdir)/\$\$i -nt \$\$i.bchecktest.cc; then \\\n" . + "\t echo \"int main() {return 0;}\" > \$\$i.bchecktest.cc ; \\\n" . + "\t echo \"#include \\\"\$\$i\\\"\" >> \$\$i.bchecktest.cc ; \\\n" . + "\t echo \"\$\$i\"; \\\n" . + "\t if ! "; + $t .= $cxxsuffix eq "KKK" ? + "\$(CXX) \$(DEFS) -I. -I\$(srcdir) -I\$(top_builddir) \$(INCLUDES) \$(AM_CPPFLAGS) \$(CPPFLAGS) \$(KDE_CXXFLAGS) " : + "\$(CXXCOMPILE) "; + $t .= " --dump-class-hierarchy -c \$\$i.bchecktest.cc; then \\\n" . + "\t rm -f \$\$i.bchecktest.cc; exit 1; \\\n" . + "\t fi ; \\\n" . + "\t echo \"\" >> \$\$i.bchecktest.cc.class; \\\n" . + "\t perl \$(top_srcdir)/admin/bcheck.pl \$\$i.bchecktest.cc.class || { rm -f \$\$i.bchecktest.cc; exit 1; }; \\\n" . + "\t rm -f a.out; \\\n" . + "\t fi ; \\\n" . + "\tdone\n"; + appendLines("$t\n"); +} + +sub make_meta_classes () +{ + return if ($kdeopts{"qtonly"}); + + my $cppFile; + my $hFile; + my $moc_class_headers = ""; + foreach $program (@programs) { + my $mocs = ""; + my @progsources = split(/[\034\s]+/, $sources{$program}); + my @depmocs = split(' ', $dependmocs{$program}); + my %shash = (), %mhash = (); + @shash{@progsources} = 1; # we are only interested in the existence + @mhash{@depmocs} = 1; + + print STDOUT "program=$program\n" if ($verbose); + print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose); + print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose); + print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose); + foreach my $mocFile (keys (%globalmocs)) + { + my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); + if (defined ($cppFile)) + { + $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; + } + else + { + # Bah. This is the case, if no C++ file includes the .moc + # file. We make a .moc.cpp file for that. Unfortunately this + # is not included in the %sources hash, but rather is mentioned + # in %dependmocs. If the user wants to use AUTO he can't just + # use an unspecific METAINCLUDES. Instead he must use + # program_METAINCLUDES. Anyway, it's not working real nicely. + # E.g. Its not clear what happens if user specifies two + # METAINCLUDES=AUTO in the same Makefile.am. + $mocs .= " $mocFile.moc.$cxxsuffix" + if exists $mhash{$mocFile.".moc.$cxxsuffix"}; + } + } + if ($mocs) { + print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose); + } + print STDOUT "\n" if $verbose; + } + if ($moc_class_headers) { + appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n"); + $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes "; + } +} + +#----------------------------------------------------------------------------- + +sub updateMakefile () +{ + return if ($dryrun); + + open (FILEOUT, "> $makefile") + || die "Could not create $makefile: $!\n"; + + $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines + # Append our $progId line, _below_ the "generated by automake" line + # because automake-1.6 relies on the first line to be his own. + my $progIdLine = "\# $progId - " . '$Revision: 1.411 $ '."\n"; + if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) { + warn "automake line not found in $makefile\n"; + # Fallback: first line + print FILEOUT $progIdLine; + }; + print FILEOUT $MakefileData; + close FILEOUT; +} + +#----------------------------------------------------------------------------- + +# The given line needs to be removed from the makefile +# Do this by adding the special "removed line" comment at the line start. +sub removeLine ($$) +{ + my ($lookup, $old) = @_; + + $old =~ s/\034/\\\n#>- /g; # Fix continuation lines + $MakefileData =~ s/\n$lookup/\n#>\- $old/; +} + +#----------------------------------------------------------------------------- + +# Replaces the old line with the new line +# old line(s) are retained but tagged as removed. The new line(s) have the +# "added" tag placed before it. +sub substituteLine ($$) +{ + my ($lookup, $new) = @_; + + if ($MakefileData =~ /\n($lookup)/) { + $old = $1; + $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines + my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; + $new =~ s/\\\n/\034/g; + $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/; + } else { + warn "Warning: substitution of \"$lookup\" in $printname failed\n"; + } +} + +#----------------------------------------------------------------------------- + +# Slap new lines on the back of the file. +sub appendLines ($) +{ + my ($new) = @_; + my $copynew = $new; + my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; + $new =~ s/\\\n/\034/g; # Fix continuation lines + $MakefileData .= "\n#>\+ $newCount\n$new"; +} + +#----------------------------------------------------------------------------- + +# Restore the Makefile.in to the state it was before we fiddled with it +sub restoreMakefile () +{ + $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g; + # Restore removed lines + $MakefileData =~ s/([\n\034])#>\- /$1/g; + # Remove added lines + while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/) + { + my $newCount = $1; + my $removeLines = ""; + while ($newCount--) { + $removeLines .= "[^\n\034]*([\n\034]|)"; + } + $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/; + } +} + +#----------------------------------------------------------------------------- + +# find the .kcfg file listed in the .kcfgc file +sub findKcfgFile($) +{ + my ($kcfgf) = @_; + open (KCFGFIN, $kcfgf) || die "Could not open $kcfgf: $!\n"; + seek(KCFGFIN, 0, 2); + my $kcfgfsize = tell(KCFGFIN); + seek(KCFGFIN, 0, 0); + read KCFGFIN, $kcfgfData, $kcfgfsize; + close KCFGFIN; + if(($kcfgfData =~ m/^File=(.*\.kcfg)/gm)) { + $kcfg = $1; + } +} diff --git a/admin/bcheck.pl b/admin/bcheck.pl new file mode 100644 index 0000000..46485e5 --- /dev/null +++ b/admin/bcheck.pl @@ -0,0 +1,156 @@ +#!/usr/bin/perl -w + +use DB_File; +use Fcntl ':flock'; + +if (!defined($ARGV[0])) { + print "usage: requires .class dump as parameter!\n"; + exit; +} + +sub bailout +{ + untie %bcheckdb if(defined(%bcheckdb)); + + if(defined(MYLOCK)) { + flock MYLOCK, LOCK_UN; + close(MYLOCK); + } + + print @_; + exit 5; +} + +sub ask_user +{ + my ($dbkey, $dbchunk) = @_; + + if (defined($ENV{"BCHECK_UPDATE"})) { + $bcheckdb{$dbkey} = $dbchunk; + return; + } + + &bailout("BC problem detected") if (! -t STDIN); + + print "(I)gnore / (Q)uit / (U)pdate: "; + + my $key; + while(defined(read STDIN, $key, 1)) { + $key = lc($key); + + print "got: >$key<\n"; + + return if ($key eq 'i'); + + &bailout("BC problem. aborted") if ($key eq 'q'); + + if ($key eq 'u') { + $bcheckdb{$dbkey} = $dbchunk; + return; + } + print "\n(I)gnore / (Q)uit / (U)pdate: "; + } +} + +sub diff_chunk($$) +{ + my ($oldl, $newl) = @_; + my @old = split /^/m, $oldl; + my @new = split /^/m, $newl; + my $haschanges = 0; + my $max = $#old > $#new ? $#old : $#new; + + die "whoops. key different" if ($old[0] ne $new[0]); + + if ($#old != $#new) { + warn ("Structural difference.\n"); + print @old; + print "-----------------------------------------------\n"; + print @new; + $haschanges = 1; + return $haschanges; + } + + print $old[0]; + + my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/); + + my $c = 1; + while ($c < $max) { + my ($o, $n) = ($old[$c], $new[$c]); + chomp $o; + chomp $n; + $c++; + next if ($o eq $n); + + if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) { + next if ($n eq "$1$class$2"); + } + + $haschanges = 1; + + print "-$o\n+$n\n\n"; + } + + return $haschanges; +} + +local $dblock = $ENV{"HOME"} . "/bcheck.lock"; +my $dbfile = $ENV{"HOME"} . "/bcheck.db"; +my $cdump = $ARGV[0]; + +die "file $cdump is not readable: $!" if (! -f $cdump); + +# make sure the advisory lock exists +open(MYLOCK, ">$dblock"); +print MYLOCK ""; + +flock MYLOCK, LOCK_EX; + +tie %bcheckdb, 'DB_File', $dbfile; + +my $chunk = ""; + +open (IN, "<$cdump") or die "cannot open $cdump: $!"; +while () { + + chop; + + s/0x[0-9a-fA-F]+/0x......../g; + s/base size=/size=/g; + s/base align=/align=/g; + + $chunk .= $_ . "\n"; + + if(/^\s*$/) { + my @lines = split /^/m, $chunk; + my $key = $lines[0]; + chomp $key; + + if($key !~ // && + $key !~ //) { + if(defined($bcheckdb{$key})) { + my $dbversion = $bcheckdb{$key}; + + if($dbversion ne $chunk) { + &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk)); + } + } + else { + $bcheckdb{$key} = $chunk; + print "NEW: $key\n"; + } + } + + $chunk = ""; + next; + } + +} +close(IN); + +untie %bcheckdb; +flock MYLOCK, LOCK_UN; +close(MYLOCK); + +exit 0; diff --git a/admin/compile b/admin/compile new file mode 100755 index 0000000..9bb997a --- /dev/null +++ b/admin/compile @@ -0,0 +1,99 @@ +#! /bin/sh + +# Wrapper for compilers which do not understand `-c -o'. + +# Copyright 1999, 2000 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Usage: +# compile PROGRAM [ARGS]... +# `-o FOO.o' is removed from the args passed to the actual compile. + +prog=$1 +shift + +ofile= +cfile= +args= +while test $# -gt 0; do + case "$1" in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we do something ugly here. + ofile=$2 + shift + case "$ofile" in + *.o | *.obj) + ;; + *) + args="$args -o $ofile" + ofile= + ;; + esac + ;; + *.c) + cfile=$1 + args="$args $1" + ;; + *) + args="$args $1" + ;; + esac + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$prog" $args +fi + +# Name of file we expect compiler to create. +cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir $lockdir > /dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir $lockdir; exit 1" 1 2 15 + +# Run the compile. +"$prog" $args +status=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +fi + +rmdir $lockdir +exit $status diff --git a/admin/conf.change.pl b/admin/conf.change.pl new file mode 100644 index 0000000..645b820 --- /dev/null +++ b/admin/conf.change.pl @@ -0,0 +1,191 @@ +#!/usr/bin/env perl + +# this script patches a config.status file, to use our own perl script +# in the main loop +# we do it this way to circumvent hacking (and thereby including) +# autoconf function (which are GPL) into our LGPL acinclude.m4.in +# written by Michael Matz +# adapted by Dirk Mueller +# +# This file is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public +# License as published by the Free Software Foundation; either +# version 2 of the License, or (at your option) any later version. + +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. + +# You should have received a copy of the GNU Library General Public License +# along with this library; see the file COPYING.LIB. If not, write to +# the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# we have to change two places +# 1. the splitting of the substitutions into chunks of 90 (or even 48 in +# later autoconf's +# 2. the big main loop which patches all Makefile.in's + +use strict; +use File::Basename; + +my $ac_aux_dir = dirname($0); +my ($flag); +my $ac_version = 0; +my $vpath_seen = 0; +$flag = 0; + +while (<>) { +# usage of $flag: 0 -- we have seen nothing yet +# 1 -- we are in (1) +# 2 -- we have ended (1) +# 3 -- we are in (2) +# 4 -- we ended (2) + + if ($flag == 4) { + print; + } elsif ($flag == 0) { +# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..." +# ends with (excluding) "CONFIG_FILE=..." +# in later autoconf (2.14.1) there is no CONFIG_FILES= line, +# but instead the (2) directly follow (1) + if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) { + $flag = 1; + if ($1 eq 'lines') { + # lets hope its different with 2141, + # wasn't able to verify that + if ($2 eq '48') { + $ac_version = 250; + } + else { + $ac_version = 2141; + } + } elsif ($1 eq 'cmds') { + $ac_version = 213; + } + # hmm, we don't know the autoconf version, but we try anyway + } else { + print; + } + } elsif ($flag == 1) { + if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) { + print; + $flag = 2; + } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { + $flag = 3; + } + } elsif ($flag == 2) { +# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1)) +# end with: "rm -f conftest.s\*" +# on autoconf 250, it ends with '# CONFIG_HEADER section' +# +# gg: if a post-processing commands section is found first, +# stop there and insert a new loop to honour the case/esac. +# (pattern: /^\s+#\sRun the commands associated with the file./) + + if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { + $flag = 3; + } else { + print; + } + } elsif ($flag == 3) { + if (/^\s*rm\s+-f\s+conftest/ ) { + $flag = 4; + &insert_main_loop(); + } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) { + $flag = 4; + &insert_main_loop(); + #die "hhhhhhh"; + if ($ac_version != 2141) { + print STDERR "hmm, don't know autoconf version\n"; + } + } elsif (/^\#\s*CONFIG_(HEADER|COMMANDS) section.*|^\s+#\s(Run) the commands associated/) { + $flag = 4; + my $commands = defined $2; + &insert_main_loop(); + $commands && insert_command_loop(); + if($ac_version != 250) { + print STDERR "hmm, something went wrong :-(\n"; + } + } elsif (/VPATH/ ) { + $vpath_seen = 1; + } + } +} + +die "wrong input (flag != 4)" unless $flag == 4; +print STDERR "hmm, don't know autoconf version\n" unless $ac_version; + +sub insert_main_loop { + + if ($ac_version == 250) { + &insert_main_loop_250(); + } + else { + &insert_main_loop_213(); + } +} + +sub insert_main_loop_250 { + + print <>\$tmp/subs.sed +EOF + } + print <> \$tmp/subs.files + fi + done + if test -f \$tmp/subs.files ; then + perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL" + fi + rm -f \$tmp/subs.files + +fi +EOF + return; +} + +sub insert_main_loop_213 { + print <> \$ac_cs_root.subs +EOF + } + print <> \$ac_cs_root.sacfiles + fi +done +if test -f \$ac_cs_root.sacfiles ; then + perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL" +fi +rm -f \$ac_cs_root.s* + +EOF + return; +} + +sub insert_command_loop { + print <. +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# This shell variable is my proudest work .. or something. --bje + +set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ; +(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old) + || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ; +dummy=$tmpdir/dummy ; +files="$dummy.c $dummy.o $dummy.rel $dummy" ; +trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + rm -f $files ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; +unset files' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + eval $set_cc_for_build + cat <$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text + .globl main + .align 4 + .ent main +main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit + .end main +EOF + $CC_FOR_BUILD -o $dummy $dummy.s 2>/dev/null + if test "$?" = 0 ; then + case `$dummy` in + 0-0) + UNAME_MACHINE="alpha" + ;; + 1-0) + UNAME_MACHINE="alphaev5" + ;; + 1-1) + UNAME_MACHINE="alphaev56" + ;; + 1-101) + UNAME_MACHINE="alphapca56" + ;; + 2-303) + UNAME_MACHINE="alphaev6" + ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; + 2-1307) + UNAME_MACHINE="alphaev68" + ;; + 3-1307) + UNAME_MACHINE="alphaev7" + ;; + esac + fi + rm -f $dummy.s $dummy && rmdir $tmpdir + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 + rm -f $dummy.c $dummy && rmdir $tmpdir + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 + rm -f $dummy.c $dummy && rmdir $tmpdir + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy && rmdir $tmpdir + fi ;; + esac + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 + rm -f $dummy.c $dummy && rmdir $tmpdir + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + # Determine whether the default compiler uses glibc. + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #if __GLIBC__ >= 2 + LIBC=gnu + #else + LIBC= + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + rm -f $dummy.c && rmdir $tmpdir + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:3*) + echo i386-pc-interix3 + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i386-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + rm -f $dummy.c && rmdir $tmpdir + test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + rm -f $dummy.c && rmdir $tmpdir + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0 +rm -f $dummy.c $dummy && rmdir $tmpdir + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/admin/config.pl b/admin/config.pl new file mode 100644 index 0000000..034042e --- /dev/null +++ b/admin/config.pl @@ -0,0 +1,236 @@ +#!/usr/bin/env perl +# a script for use by autoconf to make the Makefiles +# from the Makefile.in's +# +# the original autoconf mechanism first splits all substitutions into groups +# of ca. 90, and than invokes sed for _every_ Makefile.in and every group +# (so around 2-3 times per Makefile.in). So this takes forever, as sed +# has to recompile the regexps every time. +# +# this script does better. It changes all Makefile.ins in one process. +# in kdelibs the time for building Makefile went down from 2:59 min to 13 sec! +# +# written by Michael Matz +# adapted by Dirk Mueller + +# This file is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public +# License as published by the Free Software Foundation; either +# version 2 of the License, or (at your option) any later version. + +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Library General Public License for more details. + +# You should have received a copy of the GNU Library General Public License +# along with this library; see the file COPYING.LIB. If not, write to +# the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +use strict; + +use File::Path; + +my $ac_subs=$ARGV[0]; +my $ac_sacfiles = $ARGV[1]; +my $ac_given_srcdir=$ARGV[2]; +my $ac_given_INSTALL=$ARGV[3]; + +my @comp_match; +my @comp_subs; + +#print "ac_subs=$ac_subs\n"; +#print "ac_sacfiles=$ac_sacfiles\n"; +#print "ac_given_srcdir=$ac_given_srcdir\n"; +#print "ac_given_INSTALL=$ac_given_INSTALL\n"; + +my $configure_input; +my ($srcdir, $top_srcdir); +my $INSTALL; +my $bad_perl = ($] < 5.005); +my $created_file_count = 0; + +open(CF, "< $ac_subs") || die "can't open $ac_subs: $!"; +my @subs = ; +close(CF); +chomp @subs; +@comp_match=(); +@comp_subs=(); + +if ($bad_perl) { + print "Using perl older than version 5.005\n"; + foreach my $pat (@subs) { + if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ ) + || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ ) + || ($pat =~ m/s,([^,]*),(.*),;t/) + || ($pat =~ m%s/([^/]*)/([^/]*)/g% ) + || ($pat =~ m%s/([^/]*)/([^/]*)/;t% ) + ) { + # form : s%bla%blubb%g + # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) + # or s,bla,blubb,;t t (autoconf 2.52) + my $srch = $1; + my $repl = $2; + $repl =~ s/\\(.)/$1/g; + push @comp_subs, make_closure($srch, $repl); + + } elsif ( ($pat =~ /%([^%]*)%d/ ) + || ($pat =~ m%/([^/]*)/d% ) + ) { + push @comp_subs, make_closure($1, ""); + } else { + die "Uhh. Malformed pattern in $ac_subs ($pat)" + unless ( $pat =~ /^\s*$/ ); # ignore white lines + } + } +} else { + foreach my $pat (@subs) { + if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || + ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || + ($pat =~ /s,([^,]*),(.*),;t/) ) { + # form : s%bla%blubb%g + # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) + # or s,bla,blubb,;t t (autoconf 2.52) + my $srch = $1; + my $repl = $2; + push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern + $repl =~ s/\\(.)/$1/g; + push @comp_subs, $repl; + } elsif ( ($pat =~ /%([^%]*)%d/ ) + || ($pat =~ m%/([^/]*)/d% ) + ) { + push @comp_match, eval "qr/\Q$1\E/"; + push @comp_subs, ""; + } else { + die "Uhh. Malformed pattern in $ac_subs ($pat)" + unless ( $pat =~ /^\s*$/ ); # ignore white lines + } + } +} +undef @subs; + +# read the list of files to be patched, form: +# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile + +open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!"; +my @ac_files = ; +close(CF); +chomp @ac_files; + + +my $ac_file; +foreach $ac_file (@ac_files) { + next if $ac_file =~ /\.\./; + next if $ac_file =~ /^\s*$/; + my $ac_file_in; + my ($ac_dir, $ac_dots, $ac_dir_suffix); + + if ($ac_file =~ /.*:.*/ ) { + ($ac_file_in = $ac_file) =~ s%[^:]*:%%; + $ac_file =~ s%:.*%%; + } else { + $ac_file_in = $ac_file.".in"; + } + +# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + +# Remove last slash and all that follows it. Not all systems have dirname. + ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%; + if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) { +# The file is in a subdirectory. + if (! -d "$ac_dir") { mkpath "$ac_dir", 0, 0777; } + ($ac_dir_suffix = $ac_dir) =~ s%^./%%; + $ac_dir_suffix="/".$ac_dir_suffix; +# A "../" for each directory in $ac_dir_suffix. + ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g; + } else { + $ac_dir_suffix=""; + $ac_dots=""; + } + + if ($ac_given_srcdir eq ".") { + $srcdir="."; + if ($ac_dots) { + ( $top_srcdir = $ac_dots) =~ s%/$%%; + } else { $top_srcdir="."; } + } elsif ($ac_given_srcdir =~ m%^/%) { + $srcdir=$ac_given_srcdir.$ac_dir_suffix; + $top_srcdir = $ac_given_srcdir; + } else { + $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix; + $top_srcdir = $ac_dots.$ac_given_srcdir; + } + + if ($ac_given_INSTALL) { + if ($ac_given_INSTALL =~ m%^/% ) { + $INSTALL = $ac_given_INSTALL; + } else { + $INSTALL = $ac_dots.$ac_given_INSTALL; + } + } + + print "fast creating $ac_file\n"; + unlink $ac_file; + my $ac_comsub=""; + my $fname=$ac_file_in; + $fname =~ s%.*/%%; + $configure_input="$ac_file. Generated from $fname by config.pl."; + + my $ac_file_inputs; + ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%; + $ac_file_inputs =~ s%:% $ac_given_srcdir/%g; + + patch_file($ac_file, $ac_file_inputs); + ++$created_file_count; +} + +print "config.pl: fast created $created_file_count file(s).\n"; + +sub patch_file { + my ($outf, $infiles) = @_; + my $filedata; + my @infiles=split(' ', $infiles); + my $i=0; + + foreach my $name (@infiles) { + if (open(CF, "< $name")) { + while () { + $filedata .= $_; + } + close(CF); + } else { + print STDERR "can't open $name: $!"."\n"; + } + } + + $filedata =~ s%\@configure_input\@%$configure_input%g; + $filedata =~ s%\@srcdir\@%$srcdir%g; + $filedata =~ s%\@top_srcdir\@%$top_srcdir%g; + $filedata =~ s%\@INSTALL\@%$INSTALL%g; + + if ($bad_perl) { + while ($i <= $#comp_subs) { + my $ref = $comp_subs[$i]; + &$ref(\$filedata); + $i++; + } + } else { + while ($i <= $#comp_match) { + $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g; + $i++; + } + } + open(CF, "> $outf") || die "can't create $outf: $!"; + print CF $filedata; + close(CF); +} + +sub make_closure { + my ($pat, $sub) = @_; + my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%\Q$pat\E%\Q$sub\E%g; }"; + if ($@) { + print "can't create CODE: $@\n"; + } + return $ret; +} diff --git a/admin/config.sub b/admin/config.sub new file mode 100755 index 0000000..1dea9b7 --- /dev/null +++ b/admin/config.sub @@ -0,0 +1,1470 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. + +timestamp='2002-09-05' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* \ + | m32r-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39 | mipstx39el \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3d) + basic_machine=alpha-cray + os=-unicos + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic4x | c4x*) + basic_machine=tic4x-unknown + os=-coff + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + windows32) + basic_machine=i386-pc + os=-windows32-msvcrt + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/admin/configure.in.bot.end b/admin/configure.in.bot.end new file mode 100644 index 0000000..14da279 --- /dev/null +++ b/admin/configure.in.bot.end @@ -0,0 +1,30 @@ +# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure +if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then + # And if so, warn when they don't match + if test "$kde_libs_prefix" != "$given_prefix"; then + # And if kde doesn't know about the prefix yet + echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null + if test $? -ne 0; then + echo "" + echo "Warning: you chose to install this package in $given_prefix," + echo "but KDE was found in $kde_libs_prefix." + echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" + echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" + echo "Then restart KDE." + echo "" + fi + fi +fi + +if test "$all_tests" = "bad"; then + if test ! "$cache_file" = "/dev/null"; then + echo "" + echo "Please remove the file $cache_file after changing your setup" + echo "so that configure will find the changes next time." + echo "" + fi +else + echo "" + echo "Good - your configure finished. Start make now" + echo "" +fi diff --git a/admin/configure.in.min b/admin/configure.in.min new file mode 100644 index 0000000..7c7e25a --- /dev/null +++ b/admin/configure.in.min @@ -0,0 +1,57 @@ +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +dnl Boston, MA 02111-1307, USA. + +# Original Author was Kalle@kde.org +# I lifted it in some mater. (Stephan Kulow) +# I used much code from Janos Farkas + +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(acinclude.m4) dnl a source file from your sub dir + +dnl This is so we can use kde-common +AC_CONFIG_AUX_DIR(admin) + +dnl This ksh/zsh feature conflicts with `cd blah ; pwd` +unset CDPATH + +dnl Checking host/target/build systems, for make, install etc. +AC_CANONICAL_SYSTEM +dnl Perform program name transformation +AC_ARG_PROGRAM + +dnl Automake doc recommends to do this only here. (Janos) +AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs + +KDE_SET_PREFIX + +dnl generate the config header +AM_CONFIG_HEADER(config.h) dnl at the distribution this done + +dnl Checks for programs. +AC_CHECK_COMPILERS +AC_ENABLE_SHARED(yes) +AC_ENABLE_STATIC(no) +KDE_PROG_LIBTOOL + +dnl for NLS support. Call them in this order! +dnl WITH_NLS is for the po files +AM_KDE_WITH_NLS + +dnl KDE_USE_QT +AC_PATH_KDE diff --git a/admin/cvs-clean.pl b/admin/cvs-clean.pl new file mode 100644 index 0000000..35d48e9 --- /dev/null +++ b/admin/cvs-clean.pl @@ -0,0 +1,87 @@ +#! /usr/bin/perl + +# +# This script recursively (beginning with the current directory) +# wipes out everything not registered in CVS. +# +# written by Oswald Buddenhagen +# inspired by the "old" cvs-clean target from Makefile.common +# +# This file is free software in terms of the BSD license. That means +# that you can do anything with it except removing this license or +# the above copyright notice. There is NO WARRANTY of any kind. +# + +sub rmrf() +{ + my $fn = shift; + lstat ($fn); + if (-d _) { + if (opendir (DIR, $fn)) { + for my $efn (grep (!/^\.\.?$/, readdir (DIR))) { + &rmrf ($fn."/".$efn); + } + closedir (DIR); + rmdir ($fn); + } + } else { + unlink ($fn); + } +} + +sub newfiles() +{ + my ($indir, $incvs) = @_; + for my $n (keys (%$incvs)) { delete $$indir{$n} } + return sort (keys (%$indir)); +} + +sub cvsclean() +{ + my $dir = shift; + my (%dirsdir, %filesdir, %dirscvs, %filescvs); + my $dnam = $dir ? $dir : "."; + if (!opendir (DIR, $dnam)) { + print STDERR "Cannot enter \"".$dnam."\".\n"; + return; + } + for my $fn (grep (!/^\.\.?$/, readdir (DIR))) { + if (-d $dir.$fn) { + $fn eq "CVS" or $dirsdir{$fn} = 1; + } else { + $filesdir{$fn} = 1; + } + } + closedir (DIR); + if (!open (FILE, "<".$dir."CVS/Entries")) { + print STDERR "No CVS information in \"".$dnam."\".\n"; + return; + } + while () { + m%^D/([^/]+)/.*$% and $dirscvs{$1} = 1; + m%^/([^/]+)/.*$% and $filescvs{$1} = 1; + } + close (FILE); + if (open (FILE, "<".$dir."CVS/Entries.Log")) { + while () { + m%^A D/([^/]+)/.*$% and $dirscvs{$1} = 1; + m%^A /([^/]+)/.*$% and $filescvs{$1} = 1; + m%^R D/([^/]+)/.*$% and delete $dirscvs{$1}; + m%^R /([^/]+)/.*$% and delete $filescvs{$1}; + } + close (FILE); + } + for my $fn (&newfiles (\%filesdir, \%filescvs)) { + print ("F ".$dir.$fn."\n"); + &rmrf ($dir.$fn); + } + for my $fn (&newfiles (\%dirsdir, \%dirscvs)) { + print ("D ".$dir.$fn."\n"); + &rmrf ($dir.$fn); + } + for my $fn (sort (keys (%dirscvs))) { + &cvsclean ($dir.$fn."/"); + } +} + +&cvsclean (""); diff --git a/admin/cvs.sh b/admin/cvs.sh new file mode 100644 index 0000000..8d3d285 --- /dev/null +++ b/admin/cvs.sh @@ -0,0 +1,668 @@ +#! /bin/sh +# +# cvs.sh +# +# This file contains support code from Makefile.common +# It defines a shell function for each known target +# and then does a case to call the correct function. + +call_and_fix_autoconf() +{ + $AUTOCONF || exit 1 + if test -r configure.in.in ; then + perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ + \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ + \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ + \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ + \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/; s,^#line.*LINENO.*\$,/* \$& */, ;" configure + fi +} + +strip_makefile() +{ + if test ! -f $makefile_wo; then + perl -e '$in=0; while ( <> ) { $in = 1 if ($_ =~ m/^if / ); print $_ unless ($in || $_ =~ m/^include /); $in = 0 if ($_ =~ m/^endif/); }' < $makefile_am > $makefile_wo + fi +} + +check_autotool_versions() +{ +required_autoconf_version="2.53 or newer" +AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1` +case $AUTOCONF_VERSION in + Autoconf*2.5* | autoconf*2.5* ) : ;; + "" ) + echo "*** AUTOCONF NOT FOUND!." + echo "*** KDE requires autoconf $required_autoconf_version" + exit 1 + ;; + * ) + echo "*** YOU'RE USING $AUTOCONF_VERSION." + echo "*** KDE requires autoconf $required_autoconf_version" + exit 1 + ;; +esac + +AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1` +case $AUTOHEADER_VERSION in + Autoconf*2.5* | autoheader*2.5* ) : ;; + "" ) + echo "*** AUTOHEADER NOT FOUND!." + echo "*** KDE requires autoheader $required_autoconf_version" + exit 1 + ;; + * ) + echo "*** YOU'RE USING $AUTOHEADER_VERSION." + echo "*** KDE requires autoheader $required_autoconf_version" + exit 1 + ;; +esac + +AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` +required_automake_version="1.6.1 or newer" +case $AUTOMAKE_STRING in + automake*1.5d* | automake*1.5* | automake*1.5-* ) + echo "*** YOU'RE USING $AUTOMAKE_STRING." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; + automake*1.6.* | automake*1.7* | automake*1.8* ) : ;; + "" ) + echo "*** AUTOMAKE NOT FOUND!." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; + unsermake* ) : + echo "*** YOU'RE USING UNSERMAKE." + echo "*** GOOD LUCK!! :)" + ;; + * ) + echo "*** YOU'RE USING $AUTOMAKE_STRING." + echo "*** KDE requires automake $required_automake_version" + exit 1 + ;; +esac +unset required_automake_version +} + +cvs() +{ +check_autotool_versions +acinclude_m4 + +### Make new subdirs and configure.in. +### The make calls could be optimized away here, +### with a little thought. +if test -r configure.in.in; then + rm -f configure.in + echo "*** Creating list of subdirectories" + create_subdirs + + if test -r Makefile.am.in; then + echo "*** Creating Makefile.am" + if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 + else + Makefile_am + fi + fi + configure_files + echo "*** Creating configure.in" + if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 + else + configure_in + fi +fi + +echo "*** Creating aclocal.m4" +$ACLOCAL $ACLOCALFLAGS || exit 1 +echo "*** Creating configure" +call_and_fix_autoconf + +if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then + echo "*** Creating config.h template" + $AUTOHEADER || exit 1 +fi + +echo "*** Creating Makefile templates" +$AUTOMAKE || exit 1 +if test -z "$UNSERMAKE"; then + echo "*** Postprocessing Makefile templates" + perl -w admin/am_edit || exit 1 +fi + +if egrep "^cvs-local:" $makefile_am >/dev/null; then \ + strip_makefile + $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 +fi + +echo "*** Creating date/time stamp" +touch stamp-h.in + +echo "*** Finished" +echo " Don't forget to run ./configure" +echo " If you haven't done so in a while, run ./configure --help" +} + +dist() +{ +check_autotool_versions + +### +### First build all of the files necessary to do just "make" +### +acinclude_m4 +if test -r configure.in.in; then + rm -f configure.in + create_subdirs + + if test -r Makefile.am.in; then + if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 + else + Makefile_am + fi + fi + configure_files + if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 + else + configure_in + fi +fi +$ACLOCAL $ACLOCALFLAGS +if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then + echo "*** Creating config.h template" + $AUTOHEADER || exit 1 +fi +$AUTOMAKE --foreign +perl -w admin/am_edit +call_and_fix_autoconf +touch stamp-h.in +if grep "^cvs-local:" $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo cvs-local top_srcdir=. +fi + +### +### Then make messages +### +if test -d po; then + LIST=`find ./po -name "*.po"` + for i in $LIST; do + file2=`echo $i | sed -e "s#\.po#\.gmo#"` + msgfmt -o $file2 $i || touch $file2 + done +fi +if grep "^cvs-dist-local:" $makefile_am >/dev/null; then + strip_makefile + $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. +fi +} + +subdir_dist() +{ +$ACLOCAL $ACLOCALFLAGS +$AUTOHEADER +$AUTOMAKE +perl -w ../admin/am_edit --path=../admin +call_and_fix_autoconf +touch stamp-h.in +} + +configure_in() +{ +rm -f configure.in configure.in.new +kde_use_qt_param= +test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } +list=`fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` +: > configure.in.new +for file in $list; do + echo "dnl =======================================================" >> configure.in.new + echo "dnl FILE: $file" >> configure.in.new + echo "dnl =======================================================" >> configure.in.new + echo "" >> configure.in.new + cat $file >> configure.in.new +done +echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new +if test -f Makefile.am.in; then + subdirs=`cat subdirs` + for dir in $subdirs; do + vdir=`echo $dir | sed -e 's,[-+.@],_,g'` + echo "AM_CONDITIONAL($vdir""_SUBDIR_included, test \"x\$$vdir""_SUBDIR_included\" = xyes)" >> configure.in.new + if test -f "$dir/configure.in"; then + echo "if test \"x\$$vdir""_SUBDIR_included\" = xyes; then " >> configure.in.new + echo " AC_CONFIG_SUBDIRS($dir)" >> configure.in.new + echo "fi" >> configure.in.new + fi + done +fi + +echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new +if test -n "$UNSERMAKE"; then + echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new + echo "AC_CONFIG_FILES([ Makefile.calls ])" >> configure.in.new +fi + +if test -f inst-apps; then + topleveldirs=`cat inst-apps` +else + topleveldirs= + for dir in `ls -1d * | sort`; do + if test "$dir" != "debian" && test -d $dir; then + topleveldirs="$topleveldirs $dir" + fi + done +fi + +for topleveldir in $topleveldirs; do + if test -f $topleveldir/configure.in; then + continue + fi + if test -f $topleveldir/Makefile.am; then :; else + continue + fi + + mfs=`find $topleveldir -name Makefile.am -print | fgrep -v "/." | \ + sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'` + for i in $mfs; do + echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new + if test -n "$UNSERMAKE"; then + echo "AC_CONFIG_FILES([ $i.rules ])" >> configure.in.new + echo "AC_CONFIG_FILES([ $i.calls ])" >> configure.in.new + fi + done +done + +files=`cat configure.files` +list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` +for file in $list; do + echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new +done + +if test -n "$UNSERMAKE"; then + echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new +fi + +midfiles=`cat configure.files | fgrep "configure.in.mid"` +test -n "$midfiles" && cat $midfiles >> configure.in.new + +echo "AC_OUTPUT" >> configure.in.new +modulename= +if test -f configure.in.in; then + if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then + kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` + fi + if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then + line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` + if test -n "$line"; then + modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` + VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` + fi + sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ + configure.in.new > configure.in && mv configure.in configure.in.new + fi +fi +if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then + VERSION="\"3.2.90\"" +fi +if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then + modulename=`pwd`; + modulename=`basename $modulename` + esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` + modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` + +fi +if test -n "$kde_use_qt_param"; then + sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ + configure.in.new > configure.in && mv configure.in configure.in.new +fi +sed -e "s#@MODULENAME@#$modulename#" configure.in.new | + sed -e "s#@VERSION@#$VERSION#" > configure.in +botfiles=`cat configure.files | egrep "configure.in.bot"` +test -n "$botfiles" && cat $botfiles >> configure.in +cat $admindir/configure.in.bot.end >> configure.in +rm -f configure.in.new +} + +configure_files() +{ +echo "*** Creating configure.files" +admindir=NO +for i in . .. ../.. ../../..; do + if test -x $i/admin; then admindir=$i/admin; break; fi +done +rm -f configure.files +touch configure.files +if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then + echo $admindir/configure.in.min >> configure.files +fi +test -f configure.in.in && echo configure.in.in >> configure.files +# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs +if test -f inst-apps; then + inst=`cat inst-apps` + list="" + for i in $inst; do + list="$list `find $i/ -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ + sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`" + done +else + list=`find . -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ + sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"` +fi +for i in $list; do if test -f $i && test `dirname $i` != "." ; then + echo $i >> configure.files +fi; done +test -f configure.in.mid && echo configure.in.mid >> configure.files +test -f configure.in.bot && echo configure.in.bot >> configure.files +if test ! -s configure.files; then + echo "There are no files to build a configure. Please check your checkout." + exit 1 +fi +} + +create_subdirs() +{ +if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then + # as many modules contain rules to create subdirs without any + # dependencies make won't create it unless there is no file. + # so we check if that's a dummy rule or one that works + rm -f subdirs.cvs.sh.$$ + if test -f subdirs; then + mv subdirs subdirs.cvs.sh.$$ + fi + strip_makefile + $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1 + if test -f subdirs.cvs.sh.$$; then + if test -s subdirs; then + rm subdirs.cvs.sh.$$ + else + mv subdirs.cvs.sh.$$ subdirs + fi + fi +else + subdirs +fi +} + +subdirs() +{ +dirs= +idirs= +if test -f inst-apps; then + idirs=`cat inst-apps` +else + idirs=`ls -1 | sort` +fi + +compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` +compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` +for i in $idirs; do + if test -f $i/Makefile.am; then + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + fi +done + +: > ./_SUBDIRS + +for d in $compilefirst; do + echo $d >> ./_SUBDIRS +done + +(for d in $dirs; do + list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` + for s in $list; do + echo $s $d + done + list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` + for s in $list; do + echo $d $s + done + echo $d $d +done ) | tsort >> ./_SUBDIRS + +for d in $compilelast; do + echo $d >> ./_SUBDIRS +done + +if test -r subdirs && cmp -s subdirs _SUBDIRS; then + rm -f _SUBDIRS +fi +test -r _SUBDIRS && mv _SUBDIRS subdirs || true +} + +Makefile_am() +{ +if test -f Makefile.am.in; then + compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` + compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` + + idirs= + dirs= + if test -f inst-apps; then + idirs=`cat inst-apps` + else + idirs=`cat subdirs` + fi + for i in $idirs; do + case " $compilefirst $compilelast " in + *" $i "*) ;; + *) dirs="$dirs $i" + esac + done + + adds=`fgrep '$(top_srcdir)/acinclude.m4:' Makefile.am.in | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir)/,,g'` + if echo "$adds" | fgrep "*" >/dev/null ; then + adds=`ls -d -1 $adds 2>/dev/null` + fgrep -v '$(top_srcdir)/acinclude.m4:' Makefile.am.in > Makefile.am.in.adds + str='$(top_srcdir)/acinclude.m4:' + for add in $adds; do + str="$str \$(top_srcdir)/$add" + done + echo $str >> Makefile.am.in.adds + else + cat Makefile.am.in > Makefile.am.in.adds + fi + + if test -n "$UNSERMAKE"; then + cat Makefile.am.in.adds > Makefile.am + topsubdirs= + for i in $compilefirst $dirs $compilelast; do + vari=`echo $i | sed -e "s,[-+],_,g"` + echo "if $vari""_SUBDIR_included" >> Makefile.am + echo "$vari""_SUBDIR=$i" >> Makefile.am + echo "endif" >> Makefile.am + topsubdirs="$topsubdirs \$($vari""_SUBDIR)" + done + echo "SUBDIRS=$topsubdirs" >> Makefile.am + else + cat Makefile.am.in.adds | \ + sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ + sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am + echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am + fi + rm Makefile.am.in.adds +fi +} + +acinclude_m4() +{ + echo "*** Creating acinclude.m4" + adds= + if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then + strip_makefile + rm -f acinclude.m4 + adds=`grep '\$(top_srcdir)/acinclude.m4:' $makefile_wo | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir),.,g'` + if echo $adds | fgrep "*" >/dev/null ; then + adds=`ls -d -1 $adds 2>/dev/null` + else + $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 || exit 1 + fi + else + rm -f acinclude.m4 + fi + # if it wasn't created up to now, then we do it better + if test ! -f acinclude.m4; then + cat admin/acinclude.m4.in admin/libtool.m4.in $adds > acinclude.m4 + fi +} + +cvs_clean() +{ +if test -d CVS; then :; else + echo "You don't have a toplevel CVS directory." + echo "You most certainly didn't use cvs to get these sources." + echo "But this function depends on cvs's information." + exit 1 +fi +perl $admindir/cvs-clean.pl +} + +package_merge() +{ +catalogs=$POFILES +for cat in $catalogs; do + msgmerge -o $cat.new $cat $PACKAGE.pot + if test -s $cat.new; then + grep -v "\"POT-Creation" $cat.new > $cat.new.2 + grep -v "\"POT-Creation" $cat >> $cat.new.1 + if diff $cat.new.1 $cat.new.2; then + rm $cat.new + else + mv $cat.new $cat + fi + rm -f $cat.new.1 $cat.new.2 + fi +done +} + +package_messages() +{ +rm -rf po.backup +mkdir po.backup + +for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do + egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i + cat po/$i > po.backup/backup_$i + touch -r po/$i po.backup/backup_$i + rm po/$i +done + +podir=${podir:-$PWD/po} +files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` +dirs=`for i in $files; do echo \`dirname $i\`; done` +tmpname="$PWD/messages.log" +if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi +if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi +export EXTRACTRC PREPARETIPS + +for subdir in $dirs; do + test -z "$VERBOSE" || echo "Making messages in $subdir" + (cd $subdir + if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then + $EXTRACTRC *.rc *.ui *.kcfg > rc.cpp + else + candidates=`ls -1 *.rc *.ui *.kcfg 2>/dev/null` + if test -n "$candidates"; then + echo "$subdir has *.rc, *.ui or *.kcfg files, but not correct messages line" + fi + fi + if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then + echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp + else echo " " > _translatorinfo.cpp + fi + perl -e '$mes=0; while () { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile + + $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \ + XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -kaliasLocale -x ${includedir:-${KDEDIR:-/usr/local/kde}/include}/kde.pot" \ + messages + exit_code=$? + if test "$exit_code" != 0; then + echo "make exit code: $exit_code" + fi + ) 2>&1 | grep -v '^make\[1\]' > $tmpname + test -s $tmpname && { echo $subdir ; cat "$tmpname"; } + test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp + rm -f $subdir/_translatorinfo.cpp + rm -f $subdir/_transMakefile +done +rm -f $tmpname +for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do + test -f po/$i || echo "disappeared: $i" +done +for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do + sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po/$i > po/$i.new && mv po/$i.new po/$i + msgmerge -q -o po/$i po/$i po/$i + egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot + if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then + echo "will update $i" + sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po.backup/$backup_$i > po/$i.new && mv po/$i.new po.backup/backup_$i + msgmerge -q po.backup/backup_$i po/$i > temp.pot + mv temp.pot po/$i + else + if test -f po.backup/backup_$i; then + test -z "$VERBOSE" || echo "I'm restoring $i" + mv po.backup/backup_$i po/$i + rm po.backup/$i + else + echo "will add $i" + fi + fi +done +rm -f temp.pot +rm -rf po.backup +} + +unset LC_ALL || : +unset LANG || : +unset LC_CTYPE || : +unset LANGUAGE || : + +unset CDPATH || : +admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` +test "x$admindir" = "x$0" && admindir=. + +test "x$MAKE" = x && MAKE=make +makefile_am=Makefile.am +makefile_wo=Makefile.am.wo +if test -f Makefile.am.in; then + makefile_am=Makefile.am.in + makefile_wo=Makefile.am.in.wo + rm -f $makefile_wo +fi + +# Suck in the AUTOCONF detection code +. $admindir/detect-autoconf.sh + +### +### Main +### + +arg=`echo $1 | tr '\-.' __` +case $arg in + cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ + cvs_clean | package_merge | package_messages | Makefile_am | acinclude_m4 ) $arg ;; + configure ) call_and_fix_autoconf ;; + * ) echo "Usage: cvs.sh " + echo "Target can be one of:" + echo " cvs cvs-clean dist" + echo " configure.in configure.files" + echo " package-merge package-messages" + echo "" + echo "Usage: anything but $1" + exit 1 ;; +esac + +if test -f $makefile_wo; then + rm $makefile_wo +fi + +exit 0 diff --git a/admin/debianrules b/admin/debianrules new file mode 100755 index 0000000..25897f2 --- /dev/null +++ b/admin/debianrules @@ -0,0 +1,43 @@ +#!/usr/bin/perl -w + +use Shell qw(mv cp mkdir rm) ; +use File::Find; +use Cwd; + +$origPwd = `pwd`; +chomp $origPwd; + +$kde_prefix = "/usr"; +$sysconfdir = "/etc"; +$kde_includedir = "$kde_prefix/include/kde"; +$infodir = "$kde_prefix/share/info"; +$mandir = "$kde_prefix/share/man"; +$qtdir = "/usr/share/qt3"; + +$kde_cgidir = "$kde_prefix/lib/cgi-bin"; +$kde_confdir = "$sysconfdir/kde3"; +$kde_htmldir = "$kde_prefix/share/doc/kde/HTML"; + +if (defined $ENV{DEB_BUILD_OPTIONS} && + $ENV{DEB_BUILD_OPTIONS} =~ /\bnostrip\b/) { + $enable_debug="--enable-debug=full"; +} else { + $enable_debug="--disable-debug"; +} + +if (@ARGV && $ARGV[0] eq 'echodirs') { + print STDOUT "export kde_prefix=$kde_prefix\n"; + print STDOUT "export sysconfdir=$sysconfdir\n"; + print STDOUT "export kde_includedir=$kde_includedir\n"; + print STDOUT "export infodir=$infodir\n"; + print STDOUT "export mandir=$mandir\n"; + print STDOUT "export qtdir=$qtdir\n"; + + print STDOUT "export kde_cgidir=$kde_cgidir\n"; + print STDOUT "export kde_confdir=$kde_confdir\n"; + print STDOUT "export kde_htmldir=$kde_htmldir\n"; + + print STDOUT "configkde=$enable_debug --disable-rpath --prefix=\$(kde_prefix) --sysconfdir=\$(sysconfdir) --includedir=\$(kde_includedir) --infodir=\$(infodir) --mandir=\$(mandir) --with-qt-dir=\$(qtdir)\n"; + + exit +} diff --git a/admin/depcomp b/admin/depcomp new file mode 100755 index 0000000..4c20c6c --- /dev/null +++ b/admin/depcomp @@ -0,0 +1,441 @@ +#! /bin/sh + +# depcomp - compile a program generating dependencies as side-effects +# Copyright 1999, 2000 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi +# `libtool' can also be set to `yes' or `no'. + +depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. This file always lives in the current directory. + # Also, the AIX compiler puts `$object:' at the start of each line; + # $object doesn't have directory information. + stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + outname="$stripped.o" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Must come before tru64. + + # Intel's C compiler understands `-MD -MF file'. However + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 AIX compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + + tmpdepfile1="$object.d" + tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` + if test "$libtool" = yes; then + "$@" -Wc,-MD + else + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + else + tmpdepfile="$tmpdepfile2" + fi + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a space and a tab in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + test -z "$dashmflag" && dashmflag=-M + ( IFS=" " + case " $* " in + *" --mode=compile "*) # this is libtool, let us make it quiet + for arg + do # cycle over the arguments + case "$arg" in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + # X makedepend + ( + shift + cleared=no + for arg in "$@"; do + case $cleared in no) + set ""; shift + cleared=yes + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift;; + -*) + ;; + *) + set fnord "$@" "$arg"; shift;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tail +3 "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + ( IFS=" " + case " $* " in + *" --mode=compile "*) + for arg + do # cycle over the arguments + case $arg in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" -E | + sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the proprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + ( IFS=" " + case " $* " in + *" --mode=compile "*) + for arg + do # cycle over the arguments + case $arg in + "--mode=compile") + # insert --quiet before "--mode=compile" + set fnord "$@" --quiet + shift # fnord + ;; + esac + set fnord "$@" "$arg" + shift # fnord + shift # "$arg" + done + ;; + esac + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + ) & + proc=$! + "$@" + stat=$? + wait "$proc" + if test "$stat" != 0; then exit $stat; fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 diff --git a/admin/deps.am b/admin/deps.am new file mode 100644 index 0000000..8f83a96 --- /dev/null +++ b/admin/deps.am @@ -0,0 +1,19 @@ +$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4 + +$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in + +$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES) + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh + +$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am + +$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh + @cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs + +# defining default rules for files that may not be present +$(top_srcdir)/Makefile.am.in: +$(CONF_FILES): + diff --git a/admin/detect-autoconf.sh b/admin/detect-autoconf.sh new file mode 100644 index 0000000..f95793e --- /dev/null +++ b/admin/detect-autoconf.sh @@ -0,0 +1,103 @@ +#! /bin/sh + +# Global variables... +AUTOCONF="autoconf" +AUTOHEADER="autoheader" +AUTOM4TE="autom4te" +AUTOMAKE="automake" +ACLOCAL="aclocal" + + +# We don't use variable here for remembering the type ... strings. +# local variables are not that portable, but we fear namespace issues with +# our includer. The repeated type calls are not that expensive. +checkAutoconf() +{ + if test -x "`$WHICH autoconf-2.5x 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.5x`" + elif test -x "`$WHICH autoconf-2.57 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.57`" + elif test -x "`$WHICH autoconf257 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf257`" + elif test -x "`$WHICH autoconf-2.56 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.56`" + elif test -x "`$WHICH autoconf-2.55 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.55`" + elif test -x "`$WHICH autoconf-2.54 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.54`" + elif test -x "`$WHICH autoconf-2.53 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.53`" + elif test -x "`$WHICH autoconf-2.53a 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.53a`" + elif test -x "`$WHICH autoconf-2.52 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf-2.52`" + elif test -x "`$WHICH autoconf2.50 2>/dev/null`" ; then + AUTOCONF="`$WHICH autoconf2.50`" + fi +} + +checkAutoheader() +{ + if test -x "`$WHICH autoheader-2.5x 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.5x`" + AUTOM4TE="`$WHICH autom4te-2.5x`" + elif test -x "`$WHICH autoheader-2.57 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.57`" + AUTOM4TE="`$WHICH autom4te-2.57`" + elif test -x "`$WHICH autoheader257 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader257`" + AUTOM4TE="`$WHICH autom4te257`" + elif test -x "`$WHICH autoheader-2.56 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.56`" + AUTOM4TE="`$WHICH autom4te-2.56`" + elif test -x "`$WHICH autoheader-2.55 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.55`" + AUTOM4TE="`$WHICH autom4te-2.55`" + elif test -x "`$WHICH autoheader-2.54 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.54`" + AUTOM4TE="`$WHICH autom4te-2.54`" + elif test -x "`$WHICH autoheader-2.53 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.53`" + AUTOM4TE="`$WHICH autom4te-2.53`" + elif test -x "`$WHICH autoheader-2.53a 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.53a`" + AUTOM4TE="`$WHICH autom4te-2.53a`" + elif test -x "`$WHICH autoheader-2.52 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader-2.52`" + elif test -x "`$WHICH autoheader2.50 2>/dev/null`" ; then + AUTOHEADER="`$WHICH autoheader2.50`" + fi +} + +checkAutomakeAclocal () +{ + if test -x "`$WHICH automake-1.6 2>/dev/null`" ; then + AUTOMAKE="`$WHICH automake-1.6`" + ACLOCAL="`$WHICH aclocal-1.6`" + elif test -x "`$WHICH automake-1.7 2>/dev/null`" ; then + AUTOMAKE="`$WHICH automake-1.7`" + ACLOCAL="`$WHICH aclocal-1.7`" + elif test -x "`$WHICH automake17 2>/dev/null`" ; then + AUTOMAKE="`$WHICH automake17`" + ACLOCAL="`$WHICH aclocal17`" + fi + if test -n "$UNSERMAKE"; then + AUTOMAKE="$UNSERMAKE" + fi +} + +checkWhich () +{ + WHICH="" + for i in "type -p" "which" "type" ; do + T=`$i sh 2> /dev/null` + test -x "$T" && WHICH="$i" && break + done +} + +checkWhich +checkAutoconf +checkAutoheader +checkAutomakeAclocal + +export WHICH AUTOHEADER AUTOCONF AUTOM4TE AUTOMAKE ACLOCAL diff --git a/admin/install-sh b/admin/install-sh new file mode 100755 index 0000000..36f96f3 --- /dev/null +++ b/admin/install-sh @@ -0,0 +1,276 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5 (mit/util/scripts/install.sh). +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd=$cpprog + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "$0: no input file specified" >&2 + exit 1 +else + : +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d "$dst" ]; then + instcmd=: + chmodcmd="" + else + instcmd=$mkdirprog + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f "$src" ] || [ -d "$src" ] + then + : + else + echo "$0: $src does not exist" >&2 + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "$0: no destination specified" >&2 + exit 1 + else + : + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d "$dst" ] + then + dst=$dst/`basename "$src"` + else + : + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' + ' +IFS="${IFS-$defaultIFS}" + +oIFS=$IFS +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS=$oIFS + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp=$pathcomp$1 + shift + + if [ ! -d "$pathcomp" ] ; + then + $mkdirprog "$pathcomp" + else + : + fi + + pathcomp=$pathcomp/ +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd "$dst" && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename "$dst"` + else + dstfile=`basename "$dst" $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename "$dst"` + else + : + fi + +# Make a couple of temp file names in the proper directory. + + dsttmp=$dstdir/#inst.$$# + rmtmp=$dstdir/#rm.$$# + +# Trap to clean up temp files at exit. + + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 + +# Move or copy the file name to the temp name + + $doit $instcmd "$src" "$dsttmp" && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && + +# Now remove or move aside any old file at destination location. We try this +# two ways since rm can't unlink itself on some systems and the destination +# file might be busy for other reasons. In this case, the final cleanup +# might fail but the new file should still install successfully. + +{ + if [ -f "$dstdir/$dstfile" ] + then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || + $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || + { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi +} && + +# Now rename the file to the real destination. + + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + +fi && + +# The final little trick to "correctly" pass the exit status to the exit trap. + +{ + (exit 0); exit +} diff --git a/admin/libtool.m4.in b/admin/libtool.m4.in new file mode 100644 index 0000000..105c0fe --- /dev/null +++ b/admin/libtool.m4.in @@ -0,0 +1,5858 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Free Software Foundation, Inc. +## Originally by Gordon Matzigkeit , 1996 +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, but +## WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +## General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +## +## As a special exception to the GNU General Public License, if you +## distribute this file as part of a program that contains a +## configuration script generated by Autoconf, you may include it under +## the same distribution terms that you use for the rest of that program. + +# serial 47 AC_PROG_LIBTOOL + + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If this macro is not defined by Autoconf, define it here. +m4_ifdef([AC_PROVIDE_IFELSE], + [], + [m4_define([AC_PROVIDE_IFELSE], + [m4_ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) +dnl And a similar setup for Fortran 77 support + AC_PROVIDE_IFELSE([AC_PROG_F77], + [AC_LIBTOOL_F77], + [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 +])]) + +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL + + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' +AC_SUBST(LIBTOOL)dnl + +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + + +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl +AC_REQUIRE([AC_PROG_NM])dnl + +AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl +dnl + +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(AR, ar, false) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_AC_SYS_COMPILER + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_SHELL_INIT(ARG) +# ---------------------- +AC_DEFUN([_LT_AC_SHELL_INIT], +[ifdef([AC_DIVERSION_NOTICE], + [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +$1 +AC_DIVERT_POP +])# _LT_AC_SHELL_INIT + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[_LT_AC_SHELL_INIT([ +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +])])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LINUX_64_MODE="32" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + LINUX_64_MODE="64" + case $host in + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; + ]) +esac + +need_locks="$enable_libtool_lock" + +])# _LT_AC_LOCK + + +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_REQUIRE([LT_AC_PROG_SED]) +AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s conftest.err; then + $2=yes + fi + fi + $rm conftest* +]) + +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION + + +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION + + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + testring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + *) + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ + = "XX$testring") >/dev/null 2>&1 && + new_result=`expr "X$testring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + testring=$testring$testring + done + testring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test ! -s out/conftest.err; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm conftest* +]) +])# AC_LIBTOOL_PROG_CC_C_O + + +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ + test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) +fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix4* | aix5*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext='$(test .$module = .yes && echo .so || echo .dylib)' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` + else + sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' + fi + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='GNU ld.so' + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case "$host_cpu" in + ia64*) + shrext='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + libsuff= + if test "x$LINUX_64_MODE" = x64; then + # Some platforms are per default 64-bit, so there's no /lib64 + if test -d /lib64; then + libsuff=64 + fi + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" + sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], + [include additional configurations @<:@automatic@:>@])], + [tagnames="$withval"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name \"$tagname\" already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && test "X$CXX" != "Xno"; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + AC_LIBTOOL_LANG_F77_CONFIG + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + AC_LIBTOOL_LANG_GCJ_CONFIG + else + tagname="" + fi + ;; + + RC) + AC_LIBTOOL_LANG_RC_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PROG_EGREP +# ------------- +# This is predefined starting with Autoconf 2.54, so this conditional +# definition can be removed once we require Autoconf 2.54 or later. +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], +[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], + [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi]) + EGREP=$ac_cv_prog_egrep + AC_SUBST([EGREP]) +])]) + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([LT_AC_PROG_SED])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case "$host_cpu" in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + irix5* | nonstopux*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + case $host_cpu in + alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) + lt_cv_deplibs_check_method=pass_all ;; + # the debian people say, arm and glibc 2.3.1 works for them with pass_all + arm* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the pathname to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/${ac_tool_prefix}nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + esac + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# LTDLINCL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, lt_dlinit, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + LTDLINCL= + fi + # For backwards non-gettext consistent compatibility... + INCLTDL="$LTDLINCL" +])# AC_LIBLTDL_INSTALLABLE + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) +])# _LT_AC_LANG_CXX + + +# AC_LIBTOOL_F77 +# -------------- +# enable support for Fortran 77 libraries +AC_DEFUN([AC_LIBTOOL_F77], +[AC_REQUIRE([_LT_AC_LANG_F77]) +])# AC_LIBTOOL_F77 + + +# _LT_AC_LANG_F77 +# --------------- +AC_DEFUN([_LT_AC_LANG_F77], +[AC_REQUIRE([AC_PROG_F77]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) +])# _LT_AC_LANG_F77 + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_RC +# -------------- +# enable support for Windows resource files +AC_DEFUN([AC_LIBTOOL_RC], +[AC_REQUIRE([LT_AC_PROG_RC]) +_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) +])# AC_LIBTOOL_RC + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}\n' + +_LT_AC_SYS_COMPILER + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + darwin* | rhapsody*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' + ;; + *) # Darwin 1.3 on + test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + ;; + esac + output_verbose_link_cmd='echo' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' + _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(hardcode_automatic, $1)=no +_LT_AC_TAGVAR(module_cmds, $1)= +_LT_AC_TAGVAR(module_expsym_cmds, $1)= +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C++ test sources. +ac_ext=cc + +# Object file extension for compiled C++ test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;\n" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + AC_PROG_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' + ;; + *) # Darwin 1.3 on + test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux9*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case "$host_cpu" in + ia64*|hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc) + # Intel C++ + with_gnu_ld=yes + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_AC_TAGVAR(GCC, $1)="$GXX" +_LT_AC_TAGVAR(LD, $1)="$LD" + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +AC_LIBTOOL_POSTDEP_PREDEP($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_DLOPEN_SELF($1) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +])# AC_LIBTOOL_LANG_CXX_CONFIG + +# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +# ------------------------ +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext='$shrext' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) +module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGISTW]]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[[]] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +AC_MSG_CHECKING([for $compiler option to produce PIC]) + ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + icpc) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case "$host_cpu" in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + linux*) + case $CC in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + esac + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[ + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix4* | aix5*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; + *) + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + else + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + fi + + # KDE requires run time linking. Make it the default. + aix_use_runtimelinking=yes + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='-qmkshrobj ${wl}-G' + else + shared_flag='-qmkshrobj' + fi + fi + fi + + # Let the compiler handle the export list. + _LT_AC_TAGVAR(always_export_symbols, $1)=no + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi4*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=no + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) + if test "$GXX" = yes ; then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + case "$host_os" in + rhapsody* | darwin1.[[012]]) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' + ;; + *) # Darwin 1.3 on + test -z ${LD_TWOLEVEL_NAMESPACE} && _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' + ;; + esac + lt_int_apple_cc_single_mod=no + output_verbose_link_cmd='echo' + if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then + lt_int_apple_cc_single_mod=yes + fi + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + fi + _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's + if test "X$lt_int_apple_cc_single_mod" = Xyes ; then + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10* | hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case "$host_cpu" in + hppa*64*|ia64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + printf "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac + fi + ;; +esac +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +# Be careful that the start marker always follows a newline. +AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) +# --------------------------------- +AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + + +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) + +AC_DEFUN([LT_AC_PROG_GCJ], +[AC_CHECK_TOOL(GCJ, gcj, no) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS) +]) + +AC_DEFUN([LT_AC_PROG_RC], +[AC_CHECK_TOOL(RC, windres, no) +]) + +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +# LT_AC_PROG_SED +# -------------- +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +AC_DEFUN([LT_AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && break + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_MSG_RESULT([$SED]) +]) diff --git a/admin/ltmain.sh b/admin/ltmain.sh new file mode 100644 index 0000000..6ed2cad --- /dev/null +++ b/admin/ltmain.sh @@ -0,0 +1,6343 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +win32_libid () { + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'` + if test "X$win32_nmres" = "Ximport" ; then + win32_libid_type="x86 archive import" + else + win32_libid_type="x86 archive static" + fi + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + +# End of Shell function definitions +##################################### + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit 1 + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2003 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit 0 + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" + done + exit 0 + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit 0 + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + ;; + + --tag) prevopt="--tag" prev=tag ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 +fi + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_output= + arg_mode=normal + libobj= + + for arg + do + case "$arg_mode" in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit 1 + fi + arg_mode=target + continue + ;; + + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit 1 + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit 1 + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit 1 + ;; + esac + + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. + # Only attempt this if the compiler in the base compile + # command doesn't match the default compiler. + if test -n "$available_tags" && test -z "$tagname"; then + case $base_compile in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" + case "$base_compile " in + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit 1 +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi + + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit 1" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit 1" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$0" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + $echo $srcfile > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit 1 + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + fi + build_libtool_libs=no + build_old_libs=yes + prefer_static_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + base_compile="$base_compile $arg" + shift + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit 1 + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit 1 + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit 1 + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit 1 + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit 1 + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-freebsd*-gnu*) + # prevent being parsed by the freebsd regexp below + ;; + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-freebsd*-gnu*) + # prevent being parsed by the freebsd regexp below + ;; + *-*-openbsd*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # gcc -m* arguments should be passed to the linker via $compiler_flags + # in order to pass architecture information to the linker + # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo + # but this is not reliable with gcc because gcc may use -mfoo to + # select a different linker, different libraries, etc, while + # -Wl,-mfoo simply passes -mfoo to the linker. + -m*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + if test "$with_gcc" = "yes" ; then + compiler_flags="$compiler_flags $arg" + fi + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit 1 + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + add_flags="$add_flags $arg" + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit 1 + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit 1 + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + add_flags="$add_flags $arg" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Infer tagged configuration to use if any are available and + # if one wasn't chosen via the "--tag" command line option. + # Only attempt this if the compiler in the base link + # command doesn't match the default compiler. + if test -n "$available_tags" && test -z "$tagname"; then + case $base_compile in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" + case $base_compile in + "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) + # The compiler in $compile_command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit 1 +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test "$status" -ne 0 && test ! -d "$output_objdir"; then + exit $status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplcations in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit 1 + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + if test "$pass" = conv && test "$allow_undefined" = yes; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit 1 + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + tmp_libs= + for deplib in $dependency_libs; do + #echo "Adding $deplib to \$deplibs" + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit 1 + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$extract_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + eval cmds=\"$old_archive_from_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5* ) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against it, someone + # is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="-L$inst_prefix_dir$libdir $add_dir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case "$libdir" in + [\\/]*) + add_dir="-L$inst_prefix_dir$libdir $add_dir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + #if test -n "$dependency_libs" && + # { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || + # test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + #fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + if test "$absdir" != "$libdir"; then + # Sure, some shells/systems don't implement the -ef. + # Those will have to live with the warning. + test "$absdir" -ef "$libdir" > /dev/null 2>&1 || + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + path="" + fi + ;; + *) + path="-L$path" + ;; + esac + + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$deplibs $depdepl" ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit 1 + else + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + *) + $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case $revision in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + *) + $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + case $age in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; + *) + $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + ;; + esac + + if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit 1 + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix | nonstopux) + major=`expr $current - $age + 1` + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit 1 + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-freebsd*-gnu*) + # Prevent $arg from being parsed by the freebsd regexp below. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c </dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo + if test "X$deplibs_check_method" = "Xnone"; then + $echo "*** Warning: inter-library dependencies are not supported in this platform." + else + $echo "*** Warning: inter-library dependencies are not known to be supported." + fi + $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + eval cmds=\"$export_symbols_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Add all flags from the command line. We here create a library, + # but those flags were only added to compile_command and + # finalize_command, which are only used when creating executables. + # So do it by hand here. + compiler_flags="$compiler_flags $add_flags" + # Only add it to commands which use CC, instead of LD, i.e. + # only to $compiler_flags + #linker_flags="$linker_flags $add_flags" + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval cmds=\"$module_expsym_cmds\" + else + eval cmds=\"$module_cmds\" + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + fi + + if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$save_output-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$save_output-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$save_output-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadale object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval cmds=\"$archive_expsym_cmds\" + else + eval cmds=\"$archive_cmds\" + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit 0 + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit 1 + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + for xlib in $convenience; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + eval cmds=\"$reload_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit 0 + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + eval cmds=\"$reload_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit 0 + ;; + + prog) + case $host in + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$output.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + else + $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit 1 + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + # AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G + # Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath. + # Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld. + # This does not apply on AIX for ia64, which uses a SysV linker. + case "$host" in + ia64-*-aix5*) ;; + *-*-aix4* | *-*-aix5*) + compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` + finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;; + esac + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit 0 + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $0 --fallback-echo"; then + case $0 in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; + *) qecho="$SHELL `pwd`/$0 --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + cwrappersource=`$echo ${objdir}/lt-${output}.c` + cwrapper=`$echo ${output}.exe` + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15 + + cat > $cwrappersource <> $cwrappersource<<"EOF" +#include +#include +#include +#include +#include +#include + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +#define DIR_SEPARATOR '/' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +#define HAVE_DOS_BASED_FILE_SYSTEM +#ifndef DIR_SEPARATOR_2 +#define DIR_SEPARATOR_2 '\\' +#endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +char * basename (const char *name); +char * fnqualify(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup ((char *) basename (argv[0])); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" + newargz[1] = fnqualify(argv[0]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; +EOF + + cat >> $cwrappersource <> $cwrappersource <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +char * +basename (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha (name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return (char *) base; +} + +char * +fnqualify(const char *path) +{ + size_t size; + char *p; + char tmp[LT_PATHMAX + 1]; + + assert(path != NULL); + + /* Is it qualified already? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha (path[0]) && path[1] == ':') + return xstrdup (path); +#endif + if (IS_DIR_SEPARATOR (path[0])) + return xstrdup (path); + + /* prepend the current directory */ + /* doesn't handle '~' */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */ + p = XMALLOC(char, size); + sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path); + return p; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit 1" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit 1 + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \$progdir\\\\\$program \${1+\"\$@\"} +" + ;; + + *) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit 1 + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" + chmod +x $output + fi + exit 0 + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + status=$? + if test "$status" -ne 0 && test ! -d "$gentop"; then + exit $status + fi + generated="$generated $gentop" + + # Add in members from convenience archives. + for xlib in $addlibs; do + # Extract the objects. + case $xlib in + [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; + *) xabs=`pwd`"/$xlib" ;; + esac + xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` + xdir="$gentop/$xlib" + + $show "${rm}r $xdir" + $run ${rm}r "$xdir" + $show "$mkdir $xdir" + $run $mkdir "$xdir" + status=$? + if test "$status" -ne 0 && test ! -d "$xdir"; then + exit $status + fi + # We will extract separately just the conflicting names and we will no + # longer touch any unique names. It is faster to leave these extract + # automatically by $AR in one run. + $show "(cd $xdir && $AR x $xabs)" + $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? + if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; renaming object files" 1>&2 + $echo "$modename: warning: to ensure that they will not overwrite" 1>&2 + $AR t "$xabs" | sort | uniq -cd | while read -r count name + do + i=1 + while test "$i" -le "$count" + do + # Put our $i before any first dot (extension) + # Never overwrite any file + name_to="$name" + while test "X$name_to" = "X$name" || test -f "$xdir/$name_to" + do + name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"` + done + $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')" + $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $? + i=`expr $i + 1` + done + done + fi + + oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` + done + fi + + compiler_flags="$compiler_flags $add_flags" + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + eval cmds=\"$old_archive_from_new_cmds\" + else + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + # GNU ar 2.10+ was changed to match POSIX; thus no paths are + # encoded into archives. This makes 'ar r' malfunction in + # this piecewise linking case whenever conflicting object + # names appear in distinct ar calls; check, warn and compensate. + if (for obj in $save_oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2 + $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2 + AR_FLAGS=cq + fi + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*"` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~$old_archive_cmds\" + fi + fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit 0 + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg="$nonopt" + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest="$arg" + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) prev="-f" ;; + -g) prev="-g" ;; + -m) prev="-m" ;; + -o) prev="-o" ;; + -s) + stripme=" -s" + continue + ;; + -*) ;; + + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest="$arg" + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit 1 + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit 1 + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit 1 + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + eval cmds=\"$postinstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit 0 + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac + # If there is no directory component, then add one. + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit 1 + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # To insure that "foo" is sourced, and not "foo.exe", + # finese the cygwin/MSYS system by explicitly sourcing "foo." + # which disallows the automatic-append-.exe behavior. + case $build in + *cygwin* | *mingw*) wrapperdot=${wrapper}. ;; + *) wrapperdot=${wrapper} ;; + esac + # If there is no directory component, then add one. + case $file in + */* | *\\*) . ${wrapperdot} ;; + *) . ./${wrapperdot} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir="/tmp" + test -n "$TMPDIR" && tmpdir="$TMPDIR" + tmpdir="$tmpdir/libtool-$$" + if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then : + else + $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 + continue + fi + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + eval cmds=\"$old_postinstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $0 --finish$current_libdirs' + else + exit 0 + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + eval cmds=\"$finish_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + exit 0 + + $echo "----------------------------------------------------------------------" + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "----------------------------------------------------------------------" + exit 0 + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit 1 + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit 1 + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit 0 + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test "$mode" = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + fi + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit 1 + fi +fi # test -z "$show_help" + +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit 1 +fi + +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to ." + exit 0 + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit 0 + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: diff --git a/admin/missing b/admin/missing new file mode 100755 index 0000000..6a37006 --- /dev/null +++ b/admin/missing @@ -0,0 +1,336 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. +# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch]" + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing 0.4 - GNU automake" + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + + aclocal*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. + You can get \`$1Help2man' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then + # We have makeinfo, but it failed. + exit 1 + fi + + echo 1>&2 "\ +WARNING: \`$1' is missing on your system. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + tar) + shift + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + fi + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and you do not seem to have it handy on your + system. You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequirements for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 diff --git a/admin/mkinstalldirs b/admin/mkinstalldirs new file mode 100755 index 0000000..d2d5f21 --- /dev/null +++ b/admin/mkinstalldirs @@ -0,0 +1,111 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman +# Created: 1993-05-16 +# Public domain + +errstatus=0 +dirmode="" + +usage="\ +Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" 1>&2 + exit 0 + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +case $dirmode in + '') + if mkdir -p -- . 2>/dev/null; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + fi + ;; + *) + if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + fi + ;; +esac + +for file +do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# End: +# mkinstalldirs ends here diff --git a/admin/nmcheck b/admin/nmcheck new file mode 100755 index 0000000..1544713 --- /dev/null +++ b/admin/nmcheck @@ -0,0 +1,371 @@ +#!/usr/bin/perl -w + +# Check namespace cleanness of a library. +# Allowed symbols are passed as arguments. +# They may have trailing * = wildcard. +# Wildcards may be also specified as *::* (e.g. K*::* for all KDE classes) +# Symbols are listed as full function unmangled names without arguments, +# e.g. 'foo bar* nspace::*' allows foo(), foo(int), bar(), barbar() +# and all symbols in namespace/class nspace. +# If an argument has comma in it, it's a filename of a file containing +# allowed symbols, one per line. + + +$thisProg = "$0"; # This programs name + +$library = ""; +$allowed_symbols = ""; +$debug = 0; +$allowed_weak = ""; +$weak_specified = 0; + +while( defined( $ARGV[ 0 ] )) +{ + $_ = shift; + if( /^--verbose$|^-v$/ ) + { + $debug = 1; + } + elsif( /^--help$|^-h$/ ) + { + print STDOUT "Usage $thisProg [OPTION] ... library [allowed symbols] ...\n", + "\n", + "Check if the given library has only allowed public symbols.\n", + "\n", + " --allowweak=[symbol] allow only these weak symbols\n", + " -v, --verbose verbosely list files processed\n", + " -h, --help print this help, then exit\n"; + exit 0; + } + elsif( /^--allowweak=(.*)$/ ) + { + $allowed_weak .= " " . $1; + $weak_specified = 1; + } + elsif( /^--allowweak$/ ) # simply list all weak + { + $allowed_weak .= " "; + $weak_specified = 1; + } + elsif( /^--*/ ) + { + die "Invalid argument!\n"; + } + else + { + if( ! $library ) + { + $library = $_; + } + else + { + $allowed_symbols .= " " . $_; + } + } +} + +if( ! $weak_specified ) +{ + $allowed_weak = "*"; + # allow all weak symbols by default + # instances of templates and similar stuff - unfortunately includes also things from other libraries, + # so it cannot be on by default +} + +print STDERR "library:" . $library . "\n" if $debug; +print STDERR "allowed_symbols:" . $allowed_symbols . "\n" if $debug; +print STDERR "allowed_weak:" . $allowed_weak . "\n" if $debug; + +$default_symbols = "_fini _init"; # system symbols +# on my system, every .so has : +# A _DYNAMIC +# A _GLOBAL_OFFSET_TABLE_ +# A __bss_start +# A _edata +# A _end +# T _fini +# T _init +# no need to list A symbols in $default_symbols + +print STDERR "default_symbols: " . $default_symbols . "\n" if $debug; + +print STDOUT "Namespace cleanness check for " . $library . " :\n"; + +$lib_file = ""; +if( $library =~ /\.la$/ ) +{ + # get the real library file from .la + open( FILEIN, $library ) || die "Couldn't open $! !\n"; + while( $line = ) + { + if( $line =~ /library_names=\'([^ ]*).*/o ) + { + $lib_file = $1; + } + } + close( FILEIN ); + if( ! $lib_file ) + { + print STDERR "Library file not found in .la file!\n"; + exit 1; + } + my $libpath = $library; + $libpath =~ s%[^/]*$%%; + if( -e $libpath . ".libs/" . $lib_file ) + { + $lib_file = $libpath . ".libs/" . $lib_file; + } + else + { + $lib_file = $libpath . $lib_file; + } +} +else +{ + $lib_file = $library; +} + +print STDERR "libfile: ". $lib_file . "\n" if $debug; + +$allowed_symbols .= " " . $default_symbols; + +sub process_symbols($\@\%\@); + +@wildcards = (); +%exacts = (); +@regwildcards = (); +process_symbols( $allowed_symbols, @wildcards, %exacts, @regwildcards ); +@weak_wildcards = (); +%weak_exacts = (); +@weak_regwildcards = (); +process_symbols( $allowed_weak, @weak_wildcards, %weak_exacts, @weak_regwildcards ); + +# grep is for stripping not exported symbols, which don't have address (=first column) +$nm_command = "nm -BDCg " . $lib_file . " | grep -v '^ ' |"; + +# TODO how portable is this nmcheck stuff? + +print STDERR "nm command:" . $nm_command . "\n" if $debug; + +open( FILEIN, $nm_command ) || die "nm command failed\n"; + +my $exit_code = 0; + +while( $line = ) +{ + my $type; + my $symbol; + if( $line =~ /^[^ ]* (.) (.*)$/o ) + { + $type = $1; + $symbol = $2; + } + else + { + die "Invalid line: " . $line . "\n"; + } + + print STDERR "Type: " . $type . " , symbol: " . $symbol . "\n" if $debug; + if( $type eq "A" ) + { # these should be system symbols, so ignore them + next; + } + + my $orig_symbol = $symbol; + + if( $symbol =~ /\(anonymous namespace\)/o ) + { # TODO tell to prefer named namespaces? (shorter symbols) + next; + } + + # strip prefixes + # the :: appending is to make "CLASS::*" work also for "vtable for CLASS" + $symbol =~ s/^typeinfo for (.*)$/$1::/o; + $symbol =~ s/^typeinfo fn for (.*)$/$1::/o; + $symbol =~ s/^typeinfo name for (.*)$/$1::/o; + $symbol =~ s/^vtable for (.*)$/$1::/o; + $symbol =~ s/^guard variable for (.*)$/$1::/o; + $symbol =~ s/^reference temporary for (.*)$/$1::/o; + $symbol =~ s/^VTT for (.*)$/$1::/o; + $symbol =~ s/^virtual thunk \[[^\]]*\] to (.*)$/$1::/o; + $symbol =~ s/^non-virtual thunk \[[^\]]*\] to (.*)$/$1::/o; + $symbol =~ s/^covariant return thunk \[[^\]]*\] to (.*)$/$1::/o; + $symbol =~ s/^construction vtable thunk for (.*)$/$1::/o; + $symbol =~ s/^construction vtable for .*-in-(.*) [0-9]*$/$1::/o; + + # templates seem to have also return types mangled in their name, and nm prints it too + # they have also template arguments in the symbol + # get rid of both of those + while( $symbol =~ /<.*>/o ) + { + $symbol =~ s/<[^<>]*>//o; # strip innermost <> + } + if( $symbol !~ /operator\(\)/o ) + { + $symbol =~ s/ ?\(.*\).*$//o; # strip () and all after it + } + else + { + $symbol =~ s/(^|:| )operator\(\) ?\(.*\).*$//o; # strip () and all after it + } + $symbol =~ s/\[.*\] *$//o; # strip [in-charge] etc. + if( $symbol =~ /(^|:| )operator /o ) + { + $symbol =~ s/.* ([^\s]*)operator /$1/o; # strip everything before 'X::operator blah' + } + else + { + $symbol =~ s/.* ([^\s]+) *$/$1/o; # get last word (strip return type) + } + + # print STDERR "Processed symbol: " . $symbol . "\n" if $debug; + + my $found = 0; + if( $exacts{ $symbol } ) + { + $found = 1; + } + if( ! $found ) + { + for my $wild ( @wildcards ) + { + if( index( $symbol, $wild ) == 0 ) + { + $found = 1; + last; + } + } + } + if( ! $found ) + { + for my $wild ( @regwildcards ) + { + if( $symbol =~ /^$wild$/ ) + { + $found = 1; + last; + } + } + } + if( ( ! $found ) && ( $type eq "W" || $type eq "V" )) + { + if( $weak_exacts{ $symbol } ) + { + $found = 1; + } + if( ! $found ) + { + for my $wild ( @weak_wildcards ) + { + if( index( $symbol, $wild ) == 0 ) + { + $found = 1; + last; + } + } + } + if( ! $found ) + { + for my $wild ( @weak_regwildcards ) + { + if( $symbol =~ /^$wild$/ ) + { + $found = 1; + last; + } + } + } + } + + if( ! $found ) + { + print STDERR "Public symbol " . $orig_symbol . " is not allowed!\n"; + $exit_code = 1; + } +} + +close( FILEIN ); + +print STDOUT $exit_code == 0 ? "OK\n" : "FAILED\n"; + +exit $exit_code; + +sub process_symbols($\@\%\@) +{ + my $allowed_symbols = $_[ 0 ]; + my $wildcards_ref = $_[ 1 ]; + my $exacts_ref = $_[ 2 ]; + my $regwildcards_ref = $_[ 3 ]; + + $allowed_symbols =~ s/^ *//o; # strip whitespace + $allowed_symbols =~ s/ *$//o; + + if( $allowed_symbols eq "NONE" ) + { + $allowed_symbols = ""; + } + + my @symbols1 = split( ' ', $allowed_symbols ); + my $i = 0; + my @symbols2 = (); + while( defined( $symbols1[ $i ] )) + { + my $symbol = $symbols1[ $i ]; + if( $symbol =~ /\./ ) # dot in name -> file + { + open( SYMIN, $symbol ) || die ( "Cannot open file " . $symbol . "!" ); + while( $line = ) + { + $line =~ s/^\s*//o; # strip whitespace + $line =~ s/\s*$//o; + if( $line !~ /^$/o # empty line + && $line !~ /^\s*#/ ) # comment line starting with # + { + $symbols2[ $#symbols2 + 1 ] = $line; + } + } + close( SYMIN ); + } + else + { + $symbols2[ $#symbols2 + 1 ] = $symbol; + } + $i++; + } + $i = 0; + while( defined( $symbols2[ $i ] )) + { + my $symbol = $symbols2[ $i ]; + if( $symbol =~ /__/ + || $symbol =~ /^_[A-Z]/ ) + { # ISO C++ 2.10.2 + die "Symbols containing a double underscore or beginning with an underscore and an upper-case letter are reserved!\n"; + } + elsif( $symbol eq "main" + || $symbol eq "main*" ) + { + die "Symbol main is not allowed!\n"; + } + if( $symbol =~ /^([^\*]*)\*$/o # trailing * without any * before it + && $symbol !~ /operator\*$/o ) + { + print STDERR "wildcard:" . $symbol . "\n" if $debug; + $wildcards_ref->[ $#{$wildcards_ref} + 1 ] = $1; + } + elsif( $symbol =~ /\*$/o + && ( $symbol =~ /\*::/o || $symbol =~ /::\*/o ) + && $symbol !~ /^\*/o + && $symbol !~ /operator\*$/o ) + { + print STDERR "regwildcard:" . $symbol . "\n" if $debug; + $symbol =~ s/\*/\.\*/go; # change * to .* (regexp) + $regwildcards_ref->[ $#{$regwildcards_ref} + 1 ] = $symbol; + } + else + { + print STDERR "exact:" . $symbol . "\n" if $debug; + $exacts_ref->{ $symbol } = 1; + } + $i++; + } +} diff --git a/admin/oldinclude.m4.in b/admin/oldinclude.m4.in new file mode 100644 index 0000000..e5eb176 --- /dev/null +++ b/admin/oldinclude.m4.in @@ -0,0 +1,192 @@ +### -*- autoconf -*- + +dnl This file is part of the KDE libraries/packages +dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) +dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) + +dnl This file is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Library General Public +dnl License as published by the Free Software Foundation; either +dnl version 2 of the License, or (at your option) any later version. + +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Library General Public License for more details. + +dnl You should have received a copy of the GNU Library General Public License +dnl along with this library; see the file COPYING.LIB. If not, write to +dnl the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +dnl Boston, MA 02111-1307, USA. + +AC_DEFUN([KDE_CHECK_MICO], +[ +AC_REQUIRE([KDE_CHECK_LIBDL]) +AC_REQUIRE([KDE_MISC_TESTS]) +AC_MSG_CHECKING(for MICO) + +if test -z "$MICODIR"; then + kde_micodir=/usr/local + else + kde_micodir="$MICODIR" +fi + +AC_ARG_WITH(micodir, + [ --with-micodir=micodir where mico is installed ], + kde_micodir=$withval, + kde_micodir=$kde_micodir +) + +AC_CACHE_VAL(kde_cv_mico_incdir, +[ + mico_incdirs="$kde_micodir/include /usr/include /usr/local/include /usr/local/include /opt/local/include $kde_extra_includes" +AC_FIND_FILE(CORBA.h, $mico_incdirs, kde_cv_mico_incdir) + +]) +kde_micodir=`echo $kde_cv_mico_incdir | sed -e 's#/include##'` + +if test ! -r $kde_micodir/include/CORBA.h; then + AC_MSG_ERROR([No CORBA.h found, specify another micodir]) +fi + +AC_MSG_RESULT($kde_micodir) + +MICO_INCLUDES=-I$kde_micodir/include +AC_SUBST(MICO_INCLUDES) +MICO_LDFLAGS=-L$kde_micodir/lib +AC_SUBST(MICO_LDFLAGS) +micodir=$kde_micodir +AC_SUBST(micodir) + +AC_MSG_CHECKING([for MICO version]) +AC_CACHE_VAL(kde_cv_mico_version, +[ +AC_LANG_C +cat >conftest.$ac_ext < +#include +int main() { + + printf("MICO_VERSION=%s\n",MICO_VERSION); + return (0); +} +EOF +ac_compile='${CC-gcc} $CFLAGS $MICO_INCLUDES conftest.$ac_ext -o conftest' +if AC_TRY_EVAL(ac_compile); then + if eval `./conftest 2>&5`; then + kde_cv_mico_version=$MICO_VERSION + else + AC_MSG_ERROR([your system is not able to execute a small application to + find MICO version! Check $kde_micodir/include/mico/version.h]) + fi +else + AC_MSG_ERROR([your system is not able to compile a small application to + find MICO version! Check $kde_micodir/include/mico/version.h]) +fi +]) + +dnl installed MICO version +mico_v_maj=`echo $kde_cv_mico_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` +mico_v_mid=`echo $kde_cv_mico_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` +mico_v_min=`echo $kde_cv_mico_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` + +if test "x$1" = "x"; then + req_version="2.3.0" +else + req_version=$1 +fi + +dnl required MICO version +req_v_maj=`echo $req_version | sed -e 's/^\(.*\)\..*\..*$/\1/'` +req_v_mid=`echo $req_version | sed -e 's/^.*\.\(.*\)\..*$/\1/'` +req_v_min=`echo $req_version | sed -e 's/^.*\..*\.\(.*\)$/\1/'` + +if test "$mico_v_maj" -lt "$req_v_maj" || \ + ( test "$mico_v_maj" -eq "$req_v_maj" && \ + test "$mico_v_mid" -lt "$req_v_mid" ) || \ + ( test "$mico_v_mid" -eq "$req_v_mid" && \ + test "$mico_v_min" -lt "$req_v_min" ) + +then + AC_MSG_ERROR([found MICO version $kde_cv_mico_version but version $req_version \ +at least is required. You should upgrade MICO.]) +else + AC_MSG_RESULT([$kde_cv_mico_version (minimum version $req_version, ok)]) +fi + +LIBMICO="-lmico$kde_cv_mico_version $LIBCRYPT $LIBSOCKET $LIBDL" +AC_SUBST(LIBMICO) +if test -z "$IDL"; then + IDL='$(kde_bindir)/cuteidl' +fi +AC_SUBST(IDL) +IDL_DEPENDENCIES='$(kde_includes)/CUTE.h' +AC_SUBST(IDL_DEPENDENCIES) + +idldir="\$(includedir)/idl" +AC_SUBST(idldir) + +]) + +AC_DEFUN([KDE_CHECK_MINI_STL], +[ +AC_REQUIRE([KDE_CHECK_MICO]) + +AC_MSG_CHECKING(if we use mico's mini-STL) +AC_CACHE_VAL(kde_cv_have_mini_stl, +[ +AC_LANG_SAVE +AC_LANG_CPLUSPLUS +kde_save_cxxflags="$CXXFLAGS" +CXXFLAGS="$CXXFLAGS $MICO_INCLUDES" +AC_TRY_COMPILE( +[ +#include +], +[ +#ifdef HAVE_MINI_STL +#error "nothing" +#endif +], +kde_cv_have_mini_stl=no, +kde_cv_have_mini_stl=yes) +CXXFLAGS="$kde_save_cxxflags" +AC_LANG_RESTORE +]) + +if test "x$kde_cv_have_mini_stl" = "xyes"; then + AC_MSG_RESULT(yes) + $1 +else + AC_MSG_RESULT(no) + $2 +fi +]) + +]) + +AC_DEFUN([KDE_CHECK_ANSI], +[ +]) + +AC_DEFUN([KDE_CHECK_INSURE], +[ + AC_ARG_ENABLE(insure, [ --enable-insure use insure++ for debugging [default=no]], + [ + if test $enableval = "no"; dnl + then ac_use_insure="no" + else ac_use_insure="yes" + fi + ], [ac_use_insure="no"]) + + AC_MSG_CHECKING(if we will use Insure++ to debug) + AC_MSG_RESULT($ac_use_insure) + if test "$ac_use_insure" = "yes"; dnl + then CC="insure"; CXX="insure"; dnl CFLAGS="$CLAGS -fno-rtti -fno-exceptions "???? + fi +]) + +AC_DEFUN([KDE_CHECK_NEWLIBS], +[ + +]) diff --git a/admin/ylwrap b/admin/ylwrap new file mode 100755 index 0000000..5ea68e4 --- /dev/null +++ b/admin/ylwrap @@ -0,0 +1,143 @@ +#! /bin/sh +# ylwrap - wrapper for lex/yacc invocations. +# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Usage: +# ylwrap INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]... +# * INPUT is the input file +# * OUTPUT is file PROG generates +# * DESIRED is file we actually want +# * PROGRAM is program to run +# * ARGS are passed to PROG +# Any number of OUTPUT,DESIRED pairs may be used. + +# The input. +input="$1" +shift +case "$input" in + [\\/]* | ?:[\\/]*) + # Absolute path; do nothing. + ;; + *) + # Relative path. Make it absolute. + input="`pwd`/$input" + ;; +esac + +# The directory holding the input. +input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'` +# Quote $INPUT_DIR so we can use it in a regexp. +# FIXME: really we should care about more than `.' and `\'. +input_rx=`echo "$input_dir" | sed -e 's,\\\\,\\\\\\\\,g' -e 's,\\.,\\\\.,g'` + +echo "got $input_rx" + +pairlist= +while test "$#" -ne 0; do + if test "$1" = "--"; then + shift + break + fi + pairlist="$pairlist $1" + shift +done + +# The program to run. +prog="$1" +shift +# Make any relative path in $prog absolute. +case "$prog" in + [\\/]* | ?:[\\/]*) ;; + *[\\/]*) prog="`pwd`/$prog" ;; +esac + +# FIXME: add hostname here for parallel makes that run commands on +# other machines. But that might take us over the 14-char limit. +dirname=ylwrap$$ +trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15 +mkdir $dirname || exit 1 + +cd $dirname + +$prog ${1+"$@"} "$input" +status=$? + +if test $status -eq 0; then + set X $pairlist + shift + first=yes + # Since DOS filename conventions don't allow two dots, + # the DOS version of Bison writes out y_tab.c instead of y.tab.c + # and y_tab.h instead of y.tab.h. Test to see if this is the case. + y_tab_nodot="no" + if test -f y_tab.c || test -f y_tab.h; then + y_tab_nodot="yes" + fi + + while test "$#" -ne 0; do + from="$1" + # Handle y_tab.c and y_tab.h output by DOS + if test $y_tab_nodot = "yes"; then + if test $from = "y.tab.c"; then + from="y_tab.c" + else + if test $from = "y.tab.h"; then + from="y_tab.h" + fi + fi + fi + if test -f "$from"; then + # If $2 is an absolute path name, then just use that, + # otherwise prepend `../'. + case "$2" in + [\\/]* | ?:[\\/]*) target="$2";; + *) target="../$2";; + esac + + # Edit out `#line' or `#' directives. We don't want the + # resulting debug information to point at an absolute srcdir; + # it is better for it to just mention the .y file with no + # path. + sed -e "/^#/ s,$input_rx,," "$from" > "$target" || status=$? + else + # A missing file is only an error for the first file. This + # is a blatant hack to let us support using "yacc -d". If -d + # is not specified, we don't want an error when the header + # file is "missing". + if test $first = yes; then + status=1 + fi + fi + shift + shift + first=no + done +else + status=$? +fi + +# Remove the directory. +cd .. +rm -rf $dirname + +exit $status diff --git a/client/Makefile.am b/client/Makefile.am new file mode 100644 index 0000000..c742a27 --- /dev/null +++ b/client/Makefile.am @@ -0,0 +1,20 @@ +AUTOMAKE_OPTIONS = foreign + +SUBDIRS = pics + +KDE_CXXFLAGS = -DQT_PLUGIN + +INCLUDES = $(all_includes) -I$(kde_includes)/kwin + +kwindir = $(kde_datadir)/kwin/ +kwin_DATA = fahrenheit.desktop + +noinst_HEADERS = fahrenheitclient.h + +kde_module_LTLIBRARIES = kwin3_fahrenheit.la +kwin3_fahrenheit_la_SOURCES = fahrenheitclient.cc +kwin3_fahrenheit_la_LIBADD = $(kde_libraries)/libkdecorations.la +kwin3_fahrenheit_la_LDFLAGS = $(all_libraries) $(KDE_PLUGIN) -lkdecore -module +kwin3_fahrenheit_la_METASOURCES = AUTO + +DISTCLEANFILES = $(kwin3_fahrenheit_la_METASOURCES) diff --git a/client/fahrenheit.desktop b/client/fahrenheit.desktop new file mode 100644 index 0000000..d0cfde1 --- /dev/null +++ b/client/fahrenheit.desktop @@ -0,0 +1,5 @@ +# KDE Desktop Entry +[Desktop Entry] +Encoding=UTF-8 +Name=Fahrenheit +X-KDE-Library=kwin3_fahrenheit diff --git a/client/fahrenheitclient.cc b/client/fahrenheitclient.cc new file mode 100644 index 0000000..e8f846a --- /dev/null +++ b/client/fahrenheitclient.cc @@ -0,0 +1,1211 @@ +////////////////////////////////////////////////////////////////////////////// +// fahrenheitclient.cc +// ------------------- +// Fahrenheit window decoration for KDE +// ------------------- +// Copyright (c) 2004 Peter Clark +// Please see the header file for copyright and license information. +////////////////////////////////////////////////////////////////////////////// + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "fahrenheitclient.h" + +using namespace Fahrenheit; + +// global constants + +static const int borderSize_ = 5; +int titleHeight_ = 24; + +////////////////////////////////////////////////////////////////////////////// +// FahrenheitFactory Class // +////////////////////////////////////////////////////////////////////////////// + +bool FahrenheitFactory::initialized_ = false; +Qt::AlignmentFlags FahrenheitFactory::titlealign_ = Qt::AlignLeft; + +extern "C" KDecorationFactory* create_factory() +{ + return new Fahrenheit::FahrenheitFactory(); +} + +////////////////////////////////////////////////////////////////////////////// +// FahrenheitFactory() +// ---------------- +// Constructor + +FahrenheitFactory::FahrenheitFactory() +{ + readConfig(); + initialized_ = true; +} + +////////////////////////////////////////////////////////////////////////////// +// ~FahrenheitFactory() +// ----------------- +// Destructor + +FahrenheitFactory::~FahrenheitFactory() { initialized_ = false; } + +////////////////////////////////////////////////////////////////////////////// +// createDecoration() +// ----------------- +// Create the decoration + +KDecoration* FahrenheitFactory::createDecoration(KDecorationBridge* b) +{ + return new FahrenheitClient(b, this); +} + +////////////////////////////////////////////////////////////////////////////// +// reset() +// ------- +// Reset the handler. Returns true if decorations need to be remade, false if +// only a repaint is necessary + +bool FahrenheitFactory::reset(unsigned long changed) +{ + // read in the configuration + initialized_ = false; + bool confchange = readConfig(); + initialized_ = true; + + if (confchange || + (changed & (SettingDecoration | SettingButtons | SettingBorder))) { + return true; + } else { + resetDecorations(changed); + return false; + } +} + +////////////////////////////////////////////////////////////////////////////// +// readConfig() +// ------------ +// Read in the configuration file + +bool FahrenheitFactory::readConfig() +{ + // create a config object + KConfig config("kwinfahrenheitrc"); + config.setGroup("General"); + + // grab settings + Qt::AlignmentFlags oldalign = titlealign_; + QString value = config.readEntry("TitleAlignment", "AlignLeft"); + if (value == "AlignLeft") titlealign_ = Qt::AlignLeft; + else if (value == "AlignHCenter") titlealign_ = Qt::AlignHCenter; + else if (value == "AlignRight") titlealign_ = Qt::AlignRight; + + if (oldalign == titlealign_) + return false; + else + return true; +} + +////////////////////////////////////////////////////////////////////////////// +// FahrenheitButton Class // +////////////////////////////////////////////////////////////////////////////// + +////////////////////////////////////////////////////////////////////////////// +// FahrenheitButton() +// --------------- +// Constructor + +FahrenheitButton::FahrenheitButton(FahrenheitClient *parent, const char *name, + const QString& tip, ButtonType type, + QString pixmap) + : QButton(parent->widget(), name), client_(parent), type_(type), + deco_(0), lastmouse_(0) +{ + setBackgroundMode(NoBackground); + setFixedWidth(16); + setCursor(arrowCursor); + if (pixmap) setPixmap(pixmap); + QToolTip::add(this, tip); +} + +FahrenheitButton::~FahrenheitButton() +{ + if (deco_) delete deco_; +} + +////////////////////////////////////////////////////////////////////////////// +// setPixmap() +// ----------- +// Create pixmap button decorations + +void FahrenheitButton::setPixmap(QString pixmap) +{ + if (!pixmap) return; // probably the menu button + + QString buttonLocation_ = KGlobal::dirs()->findResource ("data", + QString("kwin/fahrenheit/") + pixmap + ".png"); + + if (deco_) delete deco_; + deco_ = new QPixmap(buttonLocation_); + repaint(false); +} + +////////////////////////////////////////////////////////////////////////////// +// sizeHint() +// ---------- +// Return size hint + +QSize FahrenheitButton::sizeHint() const +{ + return QSize(11, 9); +} + +////////////////////////////////////////////////////////////////////////////// +// enterEvent() +// ------------ +// Mouse has entered the button + +void FahrenheitButton::enterEvent(QEvent *e) +{ + // if we wanted to do mouseovers, we would keep track of it here + QButton::enterEvent(e); +} + +////////////////////////////////////////////////////////////////////////////// +// leaveEvent() +// ------------ +// Mouse has left the button + +void FahrenheitButton::leaveEvent(QEvent *e) +{ + // if we wanted to do mouseovers, we would keep track of it here + QButton::leaveEvent(e); +} + +////////////////////////////////////////////////////////////////////////////// +// mousePressEvent() +// ----------------- +// Button has been pressed + +void FahrenheitButton::mousePressEvent(QMouseEvent* e) +{ + lastmouse_ = e->button(); + + // translate and pass on mouse event + int button = LeftButton; + if ((type_ != ButtonMax) && (e->button() != LeftButton)) { + button = NoButton; // middle & right buttons inappropriate + } + QMouseEvent me(e->type(), e->pos(), e->globalPos(), + button, e->state()); + QButton::mousePressEvent(&me); +} + +////////////////////////////////////////////////////////////////////////////// +// mouseReleaseEvent() +// ----------------- +// Button has been released + +void FahrenheitButton::mouseReleaseEvent(QMouseEvent* e) +{ + lastmouse_ = e->button(); + + // translate and pass on mouse event + int button = LeftButton; + if ((type_ != ButtonMax) && (e->button() != LeftButton)) { + button = NoButton; // middle & right buttons inappropriate + } + QMouseEvent me(e->type(), e->pos(), e->globalPos(), button, e->state()); + QButton::mouseReleaseEvent(&me); +} + +////////////////////////////////////////////////////////////////////////////// +// drawButton() +// ------------ +// Draw the button + +void FahrenheitButton::drawButton(QPainter *painter) +{ + if (!FahrenheitFactory::initialized()) return; + + QColorGroup titleColor; + QColorGroup borderColor; + int dx, dy; + + if (type_ == ButtonMenu) { + // we paint the mini icon (which is 16 pixels high) + titleColor = KDecoration::options()->colorGroup( + KDecoration::ColorTitleBar, client_->isActive()); + + painter->fillRect(rect(), titleColor.background()); + painter->setPen(titleColor.dark()); + painter->drawLine(0, 0, width(), 0); + painter->setPen(titleColor.light()); + painter->drawLine(0, 1, width(), 1); + painter->drawPixmap(0, 3, client_->icon().pixmap(QIconSet::Small, + QIconSet::Normal)); + } else if (deco_) { + // otherwise we paint the deco + borderColor = KDecoration::options()->colorGroup( + KDecoration::ColorFrame, client_->isActive()); + dx = 2; + dy = 0; + if (isDown()) { dx++; dy++; } + painter->fillRect(rect(), borderColor.background()); + + if (!client_->isShade()) { + painter->setPen(borderColor.mid()); + painter->drawLine(0, 9, width(), 9); + painter->setPen(borderColor.dark()); + painter->drawLine(0, 10, width(), 10); + } + painter->drawPixmap(dx, dy, *deco_); + } +} + +////////////////////////////////////////////////////////////////////////////// +// FahrenheitClient Class // +////////////////////////////////////////////////////////////////////////////// + +////////////////////////////////////////////////////////////////////////////// +// FahrenheitClient() +// --------------- +// Constructor + +FahrenheitClient::FahrenheitClient(KDecorationBridge *b, KDecorationFactory *f) + : KDecoration(b, f), mainLayout_ (0), titleSpacer_ (0) +{ ; } + +FahrenheitClient::~FahrenheitClient() +{ + for (int n=0; ninstallEventFilter(this); + + // for flicker-free redraws + widget()->setBackgroundMode(NoBackground); + + // setup layout + delete mainLayout_; + + mainLayout_ = new QVBoxLayout(widget(), 0, 0); + topLayout_ = new QBoxLayout(mainLayout_, QBoxLayout::LeftToRight, 0, 0); + + titleSpacer_ = new QSpacerItem ( 0, 24, + QSizePolicy::Preferred, + QSizePolicy::Fixed); + barSpacer_ = new QSpacerItem ( 14, 24, + QSizePolicy::MinimumExpanding, + QSizePolicy::Fixed); + + menuLayout_ = new QBoxLayout(topLayout_, QBoxLayout::LeftToRight, 0, 0); + menuLayout_->addSpacing(16); + + recalcTitlebar(); + + QBoxLayout * titleLayout_ = new QBoxLayout(topLayout_, + QBoxLayout::LeftToRight, 0, 0); + buttonLayout_ = new QBoxLayout(topLayout_, + QBoxLayout::LeftToRight, 0, 0); + QBoxLayout * barLayout_ = new QBoxLayout(topLayout_, + QBoxLayout::LeftToRight, 0, 0); + titleLayout_->addItem(titleSpacer_); + + for (int n=0; ntitleButtonsLeft()); + addButtons(buttonLayout_, options()->titleButtonsRight()); + barLayout_->addItem(barSpacer_); + + QHBoxLayout * midLayout = new QHBoxLayout(mainLayout_, 0, 0); + + midLayout->addSpacing(borderSize_ + 9); + if( isPreview()) { + midLayout->addWidget( + new QLabel( i18n( "
Fahrenheit
" ), + widget())); + } else { + midLayout->addItem( new QSpacerItem( 0, 0 )); + } + + midLayout->addSpacing(borderSize_ + (isResizable() ? 2 : 0)); + mainLayout_->addSpacing(borderSize_ + (isResizable() ? 2 : 0)); + + // Make sure that topLayout doesn't stretch - midLayout should take + // all spare space. + mainLayout_->setStretchFactor(topLayout_, 0); + mainLayout_->setStretchFactor(midLayout, 1); +} + +////////////////////////////////////////////////////////////////////////////// +// recalcTitlebar() +// ------------ +// Calculate the width of the caption for the titlebar + +void FahrenheitClient::recalcTitlebar() +{ + QFontMetrics fm(options()->font(isActive())); + titleHeight_ = fm.height(); + QString cap = caption(); + if (cap.length() < 5) // make sure the titlebar has sufficiently wide + cap = "XXXXX"; // area for dragging the window + int textLen_ = fm.width( cap ); + titleSpacer_->changeSize(4 + textLen_ + 16, + 24, QSizePolicy::Preferred, QSizePolicy::Fixed); + +} + + +////////////////////////////////////////////////////////////////////////////// +// addButtons() +// ------------ +// Add buttons to title layout + +void FahrenheitClient::addButtons(QBoxLayout *layout, const QString& s) +{ + QString pixmap; + QString tip; + + if (s.length() > 0) { + for (unsigned n=0; n < s.length(); n++) { + switch (s[n]) { + case 'M': // Menu button + if (!button[ButtonMenu]) { + button[ButtonMenu] = + new FahrenheitButton(this, "menu", i18n("Menu"), + ButtonMenu, 0); + connect(button[ButtonMenu], SIGNAL(pressed()), + this, SLOT(menuButtonPressed())); + button[ButtonMenu]->setFixedHeight(19); + menuLayout_->insertWidget(-1, button[ButtonMenu], + 0, Qt::AlignTop); + menuLayout_->addSpacing(4); + } + break; + + case 'S': // Sticky button + if (!button[ButtonSticky]) { + if (isOnAllDesktops()) { + pixmap = "unsticky"; + tip = i18n("Un-Sticky"); + } else { + pixmap = "sticky"; + tip = i18n("Sticky"); + } + button[ButtonSticky] = + new FahrenheitButton(this, "sticky", tip, + ButtonSticky, pixmap); + connect(button[ButtonSticky], SIGNAL(clicked()), + this, SLOT(toggleOnAllDesktops())); + button[ButtonSticky]->setFixedHeight(11); + layout->insertWidget(-1, button[ButtonSticky], + 0, Qt::AlignBottom); + } + break; + + case 'H': // Help button + if ((!button[ButtonHelp]) && providesContextHelp()) { + button[ButtonHelp] = + new FahrenheitButton(this, "help", i18n("Help"), + ButtonHelp, "help"); + connect(button[ButtonHelp], SIGNAL(clicked()), + this, SLOT(showContextHelp())); + button[ButtonHelp]->setFixedHeight(11); + layout->insertWidget(-1, button[ButtonHelp], + 0, Qt::AlignBottom); + } + break; + + case 'I': // Minimize button + if ((!button[ButtonMin]) && isMinimizable()) { + button[ButtonMin] = + new FahrenheitButton(this, "iconify", + i18n("Minimize"), + ButtonMin, "minimize"); + connect(button[ButtonMin], SIGNAL(clicked()), + this, SLOT(minimize())); + button[ButtonMin]->setFixedHeight(11); + layout->insertWidget(-1, button[ButtonMin], + 0, Qt::AlignBottom); + } + break; + + case 'A': // Maximize button + if ((!button[ButtonMax]) && isMaximizable()) { + if (maximizeMode() == MaximizeFull) { + pixmap = "minmax"; + tip = i18n("Restore"); + } else { + pixmap = "maximize"; + tip = i18n("Maximize"); + } + button[ButtonMax] = + new FahrenheitButton(this, "maximize", tip, + ButtonMax, pixmap); + connect(button[ButtonMax], SIGNAL(clicked()), + this, SLOT(maxButtonPressed())); + button[ButtonMax]->setFixedHeight(11); + layout->insertWidget(-1, button[ButtonMax], + 0, Qt::AlignBottom); + } + break; + + case 'X': // Close button + if ((!button[ButtonClose]) && isCloseable()) { + button[ButtonClose] = + new FahrenheitButton(this, "close", i18n("Close"), + ButtonClose, "close"); + connect(button[ButtonClose], SIGNAL(clicked()), + this, SLOT(closeWindow())); + button[ButtonClose]->setFixedHeight(11); + layout->insertWidget(-1, button[ButtonClose], + 0, Qt::AlignBottom); + } + break; + + case '_': // Spacer item + layout->addSpacing(4); + } + } + } +} + +////////////////////////////////////////////////////////////////////////////// +// activeChange() +// -------------- +// window active state has changed + +void FahrenheitClient::activeChange() +{ + for (int n=0; nreset(); + widget()->repaint(false); +} + +////////////////////////////////////////////////////////////////////////////// +// captionChange() +// --------------- +// The title has changed + +void FahrenheitClient::captionChange() +{ + recalcTitlebar(); + mainLayout_->activate(); + doShape(); + widget()->repaint(topLayout_->geometry(), false); +} + +////////////////////////////////////////////////////////////////////////////// +// desktopChange() +// --------------- +// Called when desktop/sticky changes + +void FahrenheitClient::desktopChange() +{ + bool d = isOnAllDesktops(); + if (button[ButtonSticky]) { + //button[ButtonSticky]->setBitmap(d ? stickydown_bits : sticky_bits); + button[ButtonSticky]->setPixmap(d ? "unsticky" : "sticky"); + QToolTip::remove(button[ButtonSticky]); + QToolTip::add(button[ButtonSticky], d ? i18n("Un-Sticky") : i18n("Sticky")); + } +} + +////////////////////////////////////////////////////////////////////////////// +// iconChange() +// ------------ +// The title has changed + +void FahrenheitClient::iconChange() +{ + if (button[ButtonMenu]) { + button[ButtonMenu]->setPixmap(0); + button[ButtonMenu]->repaint(false); + } +} + +////////////////////////////////////////////////////////////////////////////// +// maximizeChange() +// ---------------- +// Maximized state has changed + +void FahrenheitClient::maximizeChange() +{ + bool m = (maximizeMode() == MaximizeFull); + if (button[ButtonMax]) { + //button[ButtonMax]->setBitmap(m ? minmax_bits : max_bits); + button[ButtonMax]->setPixmap(m ? "minmax" : "maximize"); + QToolTip::remove(button[ButtonMax]); + QToolTip::add(button[ButtonMax], m ? i18n("Restore") : i18n("Maximize")); + } +} + +////////////////////////////////////////////////////////////////////////////// +// shadeChange() +// ------------- +// Called when window shading changes + +void FahrenheitClient::shadeChange() +{ + // Workhere + for (int n=0; nreset(); +} + +////////////////////////////////////////////////////////////////////////////// +// borders() +// ---------- +// Get the size of the borders + +void FahrenheitClient::borders(int &l, int &r, int &t, int &b) const +{ + int handle = (isResizable() ? 2 : 0); + l = 9 + borderSize_; + r = borderSize_ + handle; + t = 24; + b = borderSize_ + handle; +} + +////////////////////////////////////////////////////////////////////////////// +// resize() +// -------- +// Called to resize the window + +void FahrenheitClient::resize(const QSize &size) +{ + widget()->resize(size); +} + +////////////////////////////////////////////////////////////////////////////// +// minimumSize() +// ------------- +// Return the minimum allowable size for this decoration + +QSize FahrenheitClient::minimumSize() const +{ + return QSize(100, 50); +} + +////////////////////////////////////////////////////////////////////////////// +// mousePosition() +// --------------- +// Return logical mouse position + +KDecoration::Position FahrenheitClient::mousePosition(const QPoint &point) const +{ + //const int corner = 24; + Position pos; + int x = point.x(); + int y = point.y(); + + if (y < titleSpacer_->geometry().height()) { + pos = PositionCenter; + } + else if (y < height() - 22) + { + if (x < borderSize_ + 9) + pos = PositionLeft; + else + if (x > width() - borderSize_ - 2) + pos = PositionRight; + else + pos = PositionCenter; + } + else + { + if (x < 29) + pos = PositionBottomLeft; + else + if (x > width() - 22) + pos = PositionBottomRight; + else + pos = PositionBottom; + } + return pos; +} + +////////////////////////////////////////////////////////////////////////////// +// isTool() +// ------------- +// + +const int SUPPORTED_WINDOW_TYPES_MASK = NET::NormalMask | NET::DesktopMask | NET::DockMask + | NET::ToolbarMask | NET::MenuMask | NET::DialogMask | NET::OverrideMask | NET::TopMenuMask + | NET::UtilityMask | NET::SplashMask; + +bool FahrenheitClient::isTool() +{ + NET::WindowType type = windowType( SUPPORTED_WINDOW_TYPES_MASK ); + return ((type==NET::Toolbar)||(type==NET::Utility)||(type==NET::Menu)); +} + +////////////////////////////////////////////////////////////////////////////// +// eventFilter() +// ------------- +// Event filter + +bool FahrenheitClient::eventFilter(QObject *obj, QEvent *e) +{ + if (obj != widget()) return false; + + switch (e->type()) { + case QEvent::MouseButtonDblClick: { + mouseDoubleClickEvent(static_cast(e)); + return true; + } + case QEvent::MouseButtonPress: { + processMousePressEvent(static_cast(e)); + return true; + } + case QEvent::Paint: { + paintEvent(static_cast(e)); + return true; + } + case QEvent::Resize: { + resizeEvent(static_cast(e)); + return true; + } + case QEvent::Show: { + showEvent(static_cast(e)); + return true; + } + default: { + return false; + } + } + + return false; +} + +////////////////////////////////////////////////////////////////////////////// +// mouseDoubleClickEvent() +// ----------------------- +// Doubleclick on title + +void FahrenheitClient::mouseDoubleClickEvent(QMouseEvent *e) +{ + if (titleSpacer_->geometry().contains(e->pos())) titlebarDblClickOperation(); +} + +////////////////////////////////////////////////////////////////////////////// +// paintEvent() +// ------------ +// Repaint the window + +void FahrenheitClient::paintEvent(QPaintEvent*) +{ + QColorGroup titleColor = options()->colorGroup(ColorTitleBar, isActive()); + QColorGroup handleColor = options()->colorGroup(ColorHandle, isActive()); + QColorGroup borderColor = options()->colorGroup(ColorFrame, isActive()); + + QRect t = titleSpacer_->geometry(); + QRect buttonRect = buttonLayout_->geometry(); + QRect barRect = barSpacer_->geometry(); + + t.setTop(1); + int handle = (isResizable() ? 2 : 0); + int barWidth = barRect.width() - handle; + int tr = t.right(); + int tt = t.top(); + int r = width() - handle; + int b = height() - handle; + int w = width(); + int h = height(); + QPainter p(widget()); + + p.setPen(Qt::black); + p.setBrush(borderColor.background()); + p.drawRect(9, 13, width() - 9 - handle, height() - 13 - handle); // Outer edge + + // Draw behind button area + p.fillRect(buttonRect, borderColor.background()); + + p.drawLine(width() - 6, 9, 12, 9); // Top edge to left of button area + + p.setPen(borderColor.dark()); + p.drawLine(width() - 2 - handle, 14, width() - 2 - handle, + height() - handle); // Right bevel edge + p.drawLine(11, height() - 2 - handle, width() - handle, + height() - 2 - handle); // Bottom bevel edge + + // Draw edge of bottom-left corner inside the area removed by the mask. + // We draw this now, instead of later with the rest, so that it doesn't + // cover up part of the grip bar. + p.setPen(Qt::black); + p.drawPoint(10, b - 5); + p.drawPoint(10, b - 4); + p.drawPoint(11, b - 3); + p.drawPoint(12, b - 2); + p.drawPoint(13, b - 2); + p.setPen(borderColor.mid()); + p.drawPoint(11, b - 5); + p.drawPoint(11, b - 4); + p.drawPoint(12, b - 3); + p.drawPoint(13, b - 3); + + p.setPen(borderColor.light()); + p.drawLine(t.width() + buttonRect.width(), 14, + width() - handle - 6, 14); // Top bevel edge of bar + //p.drawLine(10, 14, 10, height() - 6 - handle); // Left bevel edge + p.drawLine(12, 10, width() - handle - 6, 10); // Bevel edge to left of button area + + // Draw to the right of the button area + p.setPen(Qt::black); + p.drawLine(r - barWidth, 10, r - barWidth + 5, 12); + p.setPen(borderColor.mid()); + p.drawLine(r - barWidth, 11, r - barWidth + 5, 13); + p.setPen(borderColor.background()); + p.drawLine(r - barWidth, 12, r - barWidth + 5, 14); + p.drawLine(r - barWidth, 13, r - barWidth + 3, 14); + p.drawLine(r - barWidth, 14, r - barWidth + 1, 14); + + //p.setClipRegion(pe->region()); + + // Fill in area behind rounded portion of title bar + p.fillRect(tr - 11, 11, 12, 9, borderColor.background()); + + // Draw inner edge of border + if (!isShade()) + { + p.setPen(borderColor.dark()); + p.drawLine(9 + borderSize_, 23, w - borderSize_ - handle - 1, 23); + p.drawLine(8 + borderSize_, 24, 8 + borderSize_, + h - borderSize_ - handle - 1); + + p.setPen(borderColor.mid()); + p.drawLine(9 + borderSize_, 22, w - borderSize_ - handle - 2, 22); + p.drawLine(7 + borderSize_, 24, 7 + borderSize_, + h - borderSize_ - handle - 2); + p.drawPoint(8 + borderSize_, 23); + p.drawLine(w - borderSize_ - handle - 1, 22, w - borderSize_ - handle + 1, 24); + p.drawLine(7 + borderSize_, h - borderSize_ - handle - 1, 9 + borderSize_, + h - borderSize_ - handle + 1); + + p.setPen(borderColor.light()); + p.drawLine(w - borderSize_ - handle, 24, w - borderSize_ - handle, + h - borderSize_ - handle - 1); + p.drawLine(9 + borderSize_, h - borderSize_ - handle, + w - borderSize_ - handle - 1, + h - borderSize_ - handle); + p.setPen(borderColor.midlight()); + p.drawLine(w - borderSize_ - handle + 1, 25, w - borderSize_ - handle + 1, + h - borderSize_ - handle - 2); + p.drawLine(10 + borderSize_, h - borderSize_ - handle + 1, + w - borderSize_ - handle - 2, h - borderSize_ - handle + 1); + p.drawLine(w - borderSize_ - handle - 1, h - borderSize_ - handle + 1, + w - borderSize_ - handle + 1, h - borderSize_ - handle - 1); + } + + // Draw title bar + //p.fillRect(t.left() + 1, tt, tr - 12, t.bottom() - 3, titleColor.background()); + p.fillRect(1, tt, tr - 12, t.bottom() - 3, titleColor.background()); + + // Draw lower portion of grip + if (isShade()) + { + p.fillRect(0, 20, 11, 4, titleColor.background()); + } else { + p.fillRect(0, 20, 11, 14, titleColor.background()); + } + + // Draw rounded portion of title bar + p.fillRect(tr - 11, tt + 1, 3, 17, titleColor.background()); + p.setPen(titleColor.background()); + p.drawLine(tr - 8, tt + 2, tr - 8, tt + 16); + p.drawLine(tr - 7, tt + 3, tr - 7, tt + 15); + p.drawLine(tr - 6, tt + 4, tr - 6, tt + 14); + p.drawLine(tr - 5, tt + 7, tr - 5, tt + 11); + + // Draw top edge and left curve of title bar + //p.setPen(Qt::black); + p.setPen(titleColor.dark()); + p.drawPoint(3, 1); + p.drawPoint(4, 1); + p.drawPoint(2, 2); + p.drawPoint(1, 3); + p.drawPoint(1, 4); + p.drawLine(5, 0, tr - 12, 0); + + p.setPen(titleColor.light()); + p.drawPoint(3, 2); + p.drawPoint(4, 2); + p.drawPoint(2, 3); + p.drawPoint(2, 4); + p.drawLine(5, 1, tr - 12, 1); + + // Draw rounded edge of title bar + p.setPen(titleColor.dark()); + p.drawLine(tr - 11, tt, tr - 9, tt); + p.drawLine(tr - 8, tt + 1, tr - 5, tt + 4); + p.drawLine(tr - 5, tt + 5, tr - 5, tt + 6); + p.drawLine(tr - 4, tt + 7, tr - 4, tt + 11); + p.drawLine(tr - 5, tt + 12, tr - 5, tt + 13); + p.drawLine(tr - 5, tt + 14, tr - 8, tt + 17); + p.drawLine(tr - 9, tt + 18, tr - 11, tt + 18); + + p.setPen(titleColor.midlight()); + p.drawLine(tr - 11, tt+ 1, tr - 9, tt + 1); + p.drawLine(tr - 8, tt + 2, tr - 7, tt + 3); + p.setPen(titleColor.mid()); + p.drawLine(tr - 6, tt + 4, tr - 6, tt + 6); + p.drawLine(tr - 5, tt + 7, tr - 5, tt + 11); + p.drawLine(tr - 6, tt + 12, tr - 6, tt + 13); + p.drawLine(tr - 6, tt + 14, tr - 9, tt + 17); + p.drawLine(tr - 10, tt + 17, tr - 11, tt + 17); + + // Draw bottom of title bar + p.setPen(titleColor.dark()); + p.drawLine(tr - 12, tt + 19, 12, tt + 19); + p.setPen(titleColor.mid()); + p.drawLine(tr - 12, tt + 18, 12, tt + 18); + + // Draw grip and grip edges + p.setPen(titleColor.dark()); + p.drawLine(0, tt + 4, 0, tt + 27); + p.setPen(titleColor.light()); + p.drawLine(1, tt + 4, 1, tt + 27); + + p.setPen(titleColor.dark()); + if (isShade()) + { +//WORKHERE + p.drawPoint(1, 20); + p.drawPoint(1, 21); + p.drawPoint(2, 22); + p.drawPoint(3, 23); + p.drawPoint(4, 23); + p.drawLine(5, 24, 10, 24); + p.drawLine(11, 23, 11, 21); + p.setPen(titleColor.midlight()); + p.drawLine(2, 20, 2, 21); + p.setPen(titleColor.mid()); + p.drawLine(3, 22, 4, 22); + p.drawLine(5, 23, 9, 23); + p.drawLine(10, 23, 10, 21); + p.drawPoint(11, 20); + p.setPen(borderColor.mid()); + p.drawPoint(11, 24); + + //p.setPen(titleColor.light()); + p.setPen(handleColor.light()); + p.drawLine(8, 3, 3, 8); + p.drawLine(12, 3, 3, 12); + p.drawLine(12, 7, 3, 16); + p.drawLine(12, 11, 4, 19); + p.drawLine(12, 15, 6, 21); + + //p.setPen(titleColor.midlight()); + p.setPen(handleColor.midlight()); + p.drawLine(6, 3, 3, 6); + p.drawLine(7, 3, 3, 7); + p.drawLine(10, 3, 3, 10); + p.drawLine(11, 3, 3, 11); + p.drawLine(12, 5, 3, 14); + p.drawLine(12, 6, 3, 15); + p.drawLine(12, 9, 4, 17); + p.drawLine(12, 10, 4, 18); + p.drawLine(12, 13, 6, 19); + p.drawLine(12, 14, 6, 20); + p.drawLine(12, 17, 8, 21); + } else { + p.drawPoint(1, 29); + p.drawPoint(1, 30); + p.drawPoint(2, 31); + p.drawPoint(3, 32); + p.drawPoint(4, 32); + p.drawPoint(5, 33); + p.drawPoint(6, 33); + p.drawLine(7, 34, 9, 34); + p.drawLine(10, 33, 10, 22); + p.drawPoint(11, 21); + p.setPen(titleColor.midlight()); + p.drawLine(2, 29, 2, 30); + p.setPen(titleColor.mid()); + p.drawLine(3, 31, 4, 31); + p.drawLine(5, 32, 6, 32); + p.drawLine(7, 33, 9, 33); + p.drawLine(9, 32, 9, 23); + p.drawLine(9, 22, 11, 20); + + //p.setPen(titleColor.light()); + p.setPen(handleColor.light()); + p.drawLine(8, 3, 3, 8); + p.drawLine(12, 3, 3, 12); + p.drawLine(12, 7, 3, 16); + p.drawLine(12, 11, 3, 20); + p.drawLine(12, 15, 3, 24); + p.drawLine(8, 23, 3, 28); + p.drawLine(8, 27, 5, 30); + + //p.setPen(titleColor.midlight()); + p.setPen(handleColor.midlight()); + p.drawLine(6, 3, 3, 6); + p.drawLine(7, 3, 3, 7); + p.drawLine(10, 3, 3, 10); + p.drawLine(11, 3, 3, 11); + p.drawLine(12, 5, 3, 14); + p.drawLine(12, 6, 3, 15); + p.drawLine(12, 9, 3, 18); + p.drawLine(12, 10, 3, 19); + p.drawLine(12, 13, 3, 22); + p.drawLine(12, 14, 3, 23); + p.drawLine(8, 21, 3, 26); + p.drawLine(8, 22, 3, 27); + p.drawLine(8, 25, 5, 28); + p.drawLine(8, 26, 5, 29); + } + + p.setPen(Qt::black); + //p.setPen(borderColor.dark()); + + // Draw edge of top-right corner inside the area removed by the mask. + + p.drawPoint(r - 5, 14); + p.drawPoint(r - 4, 14); + p.drawPoint(r - 3, 15); + p.drawPoint(r - 2, 16); + p.drawPoint(r - 2, 17); + + p.setPen(borderColor.mid()); + p.drawPoint(r - 5, 15); + p.drawPoint(r - 4, 15); + p.drawPoint(r - 3, 16); + p.drawPoint(r - 3, 17); + + // Draw edge of bottom-right corner inside the area removed by the mask. + + p.setPen(Qt::black); + p.drawPoint(r - 2, b - 5); + p.drawPoint(r - 2, b - 4); + p.drawPoint(r - 3, b - 3); + p.drawPoint(r - 4, b - 2); + p.drawPoint(r - 5, b - 2); + p.setPen(borderColor.dark()); + p.drawPoint(r - 3, b - 5); + p.drawPoint(r - 3, b - 4); + p.drawPoint(r - 4, b - 3); + p.drawPoint(r - 5, b - 3); + + if (isResizable()) { + if (!isShade()) { // Draw handle bar + p.setPen(Qt::black); + p.fillRect(w - 5, h - 20, 3, 17, borderColor.background()); + p.fillRect(w - 20, h - 5, 17, 3, borderColor.background()); + + // Border edge, moving from top right to left bottom + p.drawLine(w - 2, h - 20, w - 1, h - 17); + p.drawLine(w - 1, h - 16, w - 1, h - 8); + p.drawLine(w - 1, h - 7, w - 2, h - 4); + p.drawPoint(w - 3, h - 3); + p.drawLine(w - 4, h - 2, w - 7, h - 1); + p.drawLine(w - 8, h - 1, w - 16, h - 1); + p.drawLine(w - 17, h - 1, w - 20, h - 2); + + // Create handle shadow + p.setPen(borderColor.dark()); + + p.drawLine(w - 3, h - 20, w - 2, h - 17); + p.drawLine(w - 2, h - 16, w - 2, h - 8); + p.drawLine(w - 2, h - 7, w - 3, h - 4); + p.drawLine(w - 4, h - 3, w - 7, h - 2); + p.drawLine(w - 8, h - 2, w - 16, h - 2); + p.drawLine(w - 17, h - 2, w - 20, h - 3); + } + } + + p.setFont(options()->font(isActive(), isTool())); + p.setPen(options()->color(ColorFont, isActive())); +/* + p.drawText(20, 0, t.width() - 36, 20, Qt::AlignVCenter, caption()); +*/ + p.drawText(menuLayout_->geometry().width(), 0, t.width() - 16, 20, + Qt::AlignVCenter, caption()); + +} + +////////////////////////////////////////////////////////////////////////////// +// doShape() +// ------------ +// Shape the window + +void FahrenheitClient::doShape() +{ + QRegion mask(0, 0, width(), height()); + QRect t(titleSpacer_->geometry()); + int handle = (isResizable() ? 2 : 0); + int tr = t.right(); + QRect barRect(barSpacer_->geometry()); + QRect buttonRect(buttonLayout_->geometry()); + + int barWidth = barRect.width() - handle; + int buttonWidth = buttonRect.width(); + int w = width(); + int h = height(); + int r = width() - handle; + int b = height() - handle; + + // Remove top-left corner. + + mask -= QRegion(0, 0, 5, 1); + mask -= QRegion(0, 1, 3, 1); + mask -= QRegion(0, 2, 2, 1); + mask -= QRegion(0, 3, 1, 2); + + // Remove area above rounded portion of title bar + mask -= QRegion(tr - 11, 0, 12, 1); + mask -= QRegion(tr - 8, 1, 9, 1); + mask -= QRegion(tr - 7, 2, 8, 1); + mask -= QRegion(tr - 6, 3, 7, 1); + mask -= QRegion(tr - 5, 4, 6, 1); + mask -= QRegion(tr - 4, 5, 5, 3); + mask -= QRegion(tr - 3, 8, 4, 1); + + // Remove area above button area + mask -= QRegion(r - buttonWidth - barWidth, 0, buttonWidth + 6, 9); + + // Remove top area above blank bar and top-right corner. + mask -= QRegion(r - barWidth + 6, 0, barWidth, 13); + + mask -= QRegion(r - barWidth, 9, 6, 1); + mask -= QRegion(r - barWidth + 2, 10, 4, 1); + mask -= QRegion(r - barWidth + 4, 11, 2, 1); + mask -= QRegion(r - 5, 13, 5, 1); + mask -= QRegion(r - 3, 14, 3, 1); + mask -= QRegion(r - 2, 15, 2, 1); + mask -= QRegion(r - 1, 16, 1, 2); + + // Remove left side below grip bar + if (isShade()) + { + mask -= QRegion(0, 20, 1, 5); + mask -= QRegion(1, 22, 1, 3); + mask -= QRegion(2, 23, 1, 2); + mask -= QRegion(3, 24, 2, 1); + } else { + mask -= QRegion(0, 29, 1, 2); + mask -= QRegion(0, 31, 2, 1); + mask -= QRegion(0, 32, 3, 1); + mask -= QRegion(0, 33, 5, 1); + mask -= QRegion(0, 34, 7, 1); + } + mask -= QRegion(0, 35, 9, b - 35); + + // Remove bottom-left corner + //mask -= QRegion(0, b - 5, 10, 3); + mask -= QRegion(0, b - 4, 10, 3); + mask -= QRegion(0, b - 3, 11, 1); + mask -= QRegion(0, b - 2, 12, 1); + mask -= QRegion(0, b - 1, 14, 1); + + // Remove bottom-right corner. + + mask -= QRegion(w - 5, h - 1, 5, 1); + mask -= QRegion(w - 3, h - 2, 3, 1); + mask -= QRegion(w - 2, h - 3, 2, 1); + mask -= QRegion(w - 1, h - 5, 1, 2); + + if (isResizable()) { + if (isShade()) { // We don't have a handle bar to worry about + mask -= QRect(w - 2, 0, w - 1, h); // right side + mask -= QRect(0, h - 2, w, h - 1); // bottom + mask -= QRegion(r - 5, b - 1, 5, 1); + mask -= QRegion(r - 3, b - 2, 3, 1); + mask -= QRegion(r - 2, b - 3, 2, 1); + mask -= QRegion(r - 1, b - 5, 1, 2); + } else { // Leave area for handle bar + mask -= QRect(w - 2, 0, w - 1, h - 20); // right side + mask -= QRect(0, h - 2, w - 20, h - 1); // bottom + mask -= QRegion(w - 1, h - 20, 1, 2); + mask -= QRegion(w - 20, h - 1, 2, 1); + } + } + setMask(mask); +} + +////////////////////////////////////////////////////////////////////////////// +// resizeEvent() +// ------------- +// Window is being resized + +void FahrenheitClient::resizeEvent(QResizeEvent *) +{ + if (widget()->isShown()) { + QRegion region = widget()->rect(); + region = region.subtract(titleSpacer_->geometry()); + doShape(); + widget()->erase(region); + } +} + +////////////////////////////////////////////////////////////////////////////// +// showEvent() +// ----------- +// Window is being shown + +void FahrenheitClient::showEvent(QShowEvent *) +{ + doShape(); + widget()->repaint(); +} + +////////////////////////////////////////////////////////////////////////////// +// maxButtonPressed() +// ----------------- +// Max button was pressed + +void FahrenheitClient::maxButtonPressed() +{ + if (button[ButtonMax]) { + switch (button[ButtonMax]->lastMousePress()) { + case MidButton: + maximize(maximizeMode() ^ MaximizeVertical); + break; + case RightButton: + maximize(maximizeMode() ^ MaximizeHorizontal); + break; + default: + (maximizeMode() == MaximizeFull) ? maximize(MaximizeRestore) + : maximize(MaximizeFull); + } + } +} + +////////////////////////////////////////////////////////////////////////////// +// menuButtonPressed() +// ------------------- +// Menu button was pressed (popup the menu) + +void FahrenheitClient::menuButtonPressed() +{ + if (button[ButtonMenu]) { + QPoint p(button[ButtonMenu]->rect().bottomLeft().x(), + button[ButtonMenu]->rect().bottomLeft().y()); + KDecorationFactory* f = factory(); + showWindowMenu(button[ButtonMenu]->mapToGlobal(p)); + if (!f->exists(this)) return; // decoration was destroyed + button[ButtonMenu]->setDown(false); + } +} + +#include "fahrenheitclient.moc" diff --git a/client/fahrenheitclient.h b/client/fahrenheitclient.h new file mode 100644 index 0000000..a3c6552 --- /dev/null +++ b/client/fahrenheitclient.h @@ -0,0 +1,166 @@ +////////////////////////////////////////////////////////////////////////////// +// fahrenheitclient.h +// ------------------- +// Fahrenheit window decoration for KDE +// ------------------- +// Copyright (c) 2003, 2004 David Johnson +// +// Permission is hereby granted, free of charge, to any person obtaining a copy +// of this software and associated documentation files (the "Software"), to +// deal in the Software without restriction, including without limitation the +// rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +// sell copies of the Software, and to permit persons to whom the Software is +// furnished to do so, subject to the following conditions: +// +// The above copyright notice and this permission notice shall be included in +// all copies or substantial portions of the Software. +// +// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +// FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +// IN THE SOFTWARE. +////////////////////////////////////////////////////////////////////////////// + +#ifndef FAHRENHEITCLIENT_H +#define FAHRENHEITCLIENT_H + +#include +#include +#include + +class QSpacerItem; +class QPoint; + +namespace Fahrenheit { + +class FahrenheitClient; + +enum ButtonType { + ButtonHelp=0, + ButtonMax, + ButtonMin, + ButtonClose, + ButtonMenu, + ButtonSticky, + ButtonTypeCount +}; + +// FahrenheitFactory ///////////////////////////////////////////////////////////// + +class FahrenheitFactory: public KDecorationFactory +{ +public: + FahrenheitFactory(); + virtual ~FahrenheitFactory(); + virtual KDecoration *createDecoration(KDecorationBridge *b); + virtual bool reset(unsigned long changed); + + static bool initialized(); + static Qt::AlignmentFlags titleAlign(); + +private: + bool readConfig(); + +private: + static bool initialized_; + static Qt::AlignmentFlags titlealign_; +}; + +inline bool FahrenheitFactory::initialized() + { return initialized_; } + +inline Qt::AlignmentFlags FahrenheitFactory::titleAlign() + { return titlealign_; } + +// FahrenheitButton ////////////////////////////////////////////////////////////// + +class FahrenheitButton : public QButton +{ +public: + FahrenheitButton(FahrenheitClient *parent=0, const char *name=0, + const QString &tip=NULL, + ButtonType type=ButtonHelp, + QString pixmap=NULL); + ~FahrenheitButton(); + + void setPixmap(QString pixmap); + QSize sizeHint() const; + int lastMousePress() const; + void reset(); + +private: + void enterEvent(QEvent *e); + void leaveEvent(QEvent *e); + void mousePressEvent(QMouseEvent *e); + void mouseReleaseEvent(QMouseEvent *e); + void drawButton(QPainter *painter); + +private: + FahrenheitClient *client_; + ButtonType type_; + QPixmap *deco_; + int lastmouse_; +}; + +inline int FahrenheitButton::lastMousePress() const + { return lastmouse_; } + +inline void FahrenheitButton::reset() + { repaint(false); } + +// FahrenheitClient ////////////////////////////////////////////////////////////// + +class FahrenheitClient : public KDecoration +{ + Q_OBJECT +public: + FahrenheitClient(KDecorationBridge *b, KDecorationFactory *f); + virtual ~FahrenheitClient(); + + virtual void init(); + + virtual void recalcTitlebar(); + virtual void activeChange(); + virtual void desktopChange(); + virtual void captionChange(); + virtual void iconChange(); + virtual void maximizeChange(); + virtual void shadeChange(); + virtual void doShape(); + + virtual void borders(int &l, int &r, int &t, int &b) const; + virtual void resize(const QSize &size); + virtual QSize minimumSize() const; + virtual Position mousePosition(const QPoint &point) const; + +private: + void addButtons(QBoxLayout* layout, const QString& buttons); + + bool isTool(); + bool eventFilter(QObject *obj, QEvent *e); + void mouseDoubleClickEvent(QMouseEvent *e); + void paintEvent(QPaintEvent *e); + void resizeEvent(QResizeEvent *); + void showEvent(QShowEvent *); + +private slots: + void maxButtonPressed(); + void menuButtonPressed(); + +private: + int buttonWidth_; + FahrenheitButton *button[ButtonTypeCount]; + QBoxLayout *mainLayout_; + QBoxLayout *topLayout_; + QBoxLayout *menuLayout_; + QBoxLayout *buttonLayout_; + QSpacerItem *titleSpacer_; + QSpacerItem *barSpacer_; +}; + +} // namespace Fahrenheit + +#endif // FAHRENHEITCLIENT_H diff --git a/client/pics/Makefile.am b/client/pics/Makefile.am new file mode 100644 index 0000000..cd202c8 --- /dev/null +++ b/client/pics/Makefile.am @@ -0,0 +1,11 @@ +linkdir = $(kde_datadir)/kwin/fahrenheit + +link_DATA = close.png maximize.png minmax.png minimize.png \ + sticky.png unsticky.png help.png + +EXTRA_DIST = $(link_DATA) + +###KMAKE-start (don't edit or delete this block) + +###KMAKE-end + diff --git a/client/pics/close.png b/client/pics/close.png new file mode 100644 index 0000000..65f7135 Binary files /dev/null and b/client/pics/close.png differ diff --git a/client/pics/help.png b/client/pics/help.png new file mode 100644 index 0000000..950fa0d Binary files /dev/null and b/client/pics/help.png differ diff --git a/client/pics/maximize.png b/client/pics/maximize.png new file mode 100644 index 0000000..118327d Binary files /dev/null and b/client/pics/maximize.png differ diff --git a/client/pics/minimize.png b/client/pics/minimize.png new file mode 100644 index 0000000..c0c9a3d Binary files /dev/null and b/client/pics/minimize.png differ diff --git a/client/pics/minmax.png b/client/pics/minmax.png new file mode 100644 index 0000000..e63406c Binary files /dev/null and b/client/pics/minmax.png differ diff --git a/client/pics/sticky.png b/client/pics/sticky.png new file mode 100644 index 0000000..61fdc59 Binary files /dev/null and b/client/pics/sticky.png differ diff --git a/client/pics/unsticky.png b/client/pics/unsticky.png new file mode 100644 index 0000000..6487855 Binary files /dev/null and b/client/pics/unsticky.png differ diff --git a/configure.in.in b/configure.in.in new file mode 100644 index 0000000..b524278 --- /dev/null +++ b/configure.in.in @@ -0,0 +1,3 @@ +#MIN_CONFIG + +AM_INIT_AUTOMAKE(fahrenheit, 0.1)