% the postscript header we use for our qpsprinter in uncompressed and commented form. % use the makepsheader perl script to generate a compressed version of this header % you can then paste into qpsprinter.cpp % % some compression of the code is done by the makepsheader script, so we don't need to % write too criptically here. /d /def load def /D {bind d} bind d /d2 {dup dup} D /B {0 d2} D /W {255 d2} D /ED {exch d} D /D0 {0 ED} D /LT {lineto} D /MT {moveto} D /S {stroke} D /F {setfont} D /SW {setlinewidth} D /CP {closepath} D /RL {rlineto} D /NP {newpath} D /CM {currentmatrix} D /SM {setmatrix} D /TR {translate} D /SD {setdash} D /SC {aload pop setrgbcolor} D /CR {currentfile read pop} D /i {index} D /bs {bitshift} D /scs {setcolorspace} D /DB {dict dup begin} D /DE {end d} D /ie {ifelse} D /sp {astore pop} D % ENDUNCOMPRESSED: Warning: leave this line in. % Everything before this line will be left untouched by the compression /BSt 0 d % brush style /LWi 1 d % line width /PSt 1 d % pen style /Cx 0 d % current x position /Cy 0 d % current y position /WFi false d % winding fill /OMo false d % opaque mode (not transparent) /BCol [ 1 1 1 ] d % brush color /PCol [ 0 0 0 ] d % pen color /BkCol [ 1 1 1 ] d % background color /BDArr [ % Brush dense patterns 0.94 0.88 0.63 0.50 0.37 0.12 0.06 ] d /defM matrix d /nS 0 d % number of saved painter states % LArr for the Pen styles is defined in emitHeader because of scaling % GPS: GetPenStyle % Returns the line pattern (from pen style PSt). % % bool GPS pattern % true : returns draw pattern % false: returns fill pattern /GPS { PSt 1 ge PSt 5 le and % valid pen pattern? { { LArr PSt 1 sub 2 mul get } % draw pattern { LArr PSt 2 mul 1 sub get } ifelse % opaque pattern } { [] } ifelse % out of range => solid line } D % QS: QtStroke % draw and fill current path % % - QS - /QS { % stroke command PSt 0 ne % != NO_PEN { gsave LWi SW % set line width true GPS 0 setdash S % draw line pattern OMo PSt 1 ne and % opaque mode and not solid line? { BkCol SC false GPS dup 0 get setdash S % fill in opaque pattern } if grestore } if } D %% The following operations are used to read compressed data from the file %% Until now this is only used for image compression % read 28 bits and leave them on tos % % - r28 num /r28 { % skip past whitespace and read one character { currentfile read pop dup 32 gt { exit } if pop } loop % read three more 3 { currentfile read pop } repeat % make an accumulator 0 % for each character, shift the accumulator and add in the character 4 { 7 bitshift exch dup 128 gt { 84 sub } if 42 sub 127 and add } repeat } D /rA 0 d % accumulator /rL 0 d % bits left % takes number of bits, leaves number % % num rB num /rB { rL 0 eq { % if we have nothing, let's get something /rA r28 d /rL 28 d } if dup rL gt { % if we don't have enough, take what we have and get more rA exch rL sub rL exch /rA 0 d /rL 0 d rB exch bitshift add } { % else take some of what we have dup rA 16#fffffff 3 -1 roll bitshift not and exch % ... and update rL and rA dup rL exch sub /rL ED neg rA exch bitshift /rA ED } ifelse } D % uncompresses image data from currentfile until the string on the % stack is full; leaves the string there. % assumes that nothing could conceivably go wrong, ie. the compressed data has % to be in the correct format and the length of the string has to be exactly right % to hold the compressed data % % string uc string % %%% Warning: if you change the method here, change the table in qpsprinter.cpp:compress()! /uc { /rL 0 d 0 { % string pos dup 2 index length ge { exit } if 1 rB 1 eq { % compressed 3 rB % string pos bits dup 3 ge { 1 add dup rB % string pos bits extra 1 index 5 ge { 1 index 6 ge { 1 index 7 ge { 1 index 8 ge { 128 add } if 64 add } if 32 add } if 16 add } if 3 add exch pop } if 3 add % string pos length exch 10 rB 1 add % string length pos dist { dup 3 index lt { dup } { 2 index } ifelse % string length pos dist length-this-time 4 index 3 index 3 index sub 2 index getinterval 5 index 4 index 3 -1 roll putinterval dup 4 -1 roll add 3 1 roll 4 -1 roll exch sub dup 0 eq { exit } if 3 1 roll } loop % string pos dist length pop pop } { % uncompressed 3 rB 1 add { 2 copy 8 rB put 1 add } repeat } ifelse } loop pop } D %% image drawing routines /sl D0 % ### is this needed ? % defines for QCI /QCIgray D0 /QCIcolor D0 /QCIindex D0 % this method prints color images if colorimage is available, otherwise % converts the string to a grayscale image and uses the reular postscript image % operator for printing. % Arguments are the same as for the image operator: % % width height bits/sample matrix datasrc QCI - /QCI { /colorimage where { pop false 3 colorimage }{ % the hard way, based on PD code by John Walker exec /QCIcolor ED /QCIgray QCIcolor length 3 idiv string d 0 1 QCIcolor length 3 idiv 1 sub { /QCIindex ED /x QCIindex 3 mul d QCIgray QCIindex QCIcolor x get 0.30 mul QCIcolor x 1 add get 0.59 mul QCIcolor x 2 add get 0.11 mul add add cvi put } for QCIgray image } ifelse } D % general image drawing routine, used from the postscript driver % % Draws images with and without mask with 1, 8 and 24(rgb) bits depth. % % width height matrix image 1|8|24 mask|false x y di % % width and height specify the width/height of the image, % matrix a transformation matrix, image a procedure holding the image data % (same for mask) and x/y an additional translation. % % ### should move the translation into the matrix!!! /di { gsave translate 1 index 1 eq { % bitmap false eq { % no mask, draw solid background pop true 3 1 roll % width height false matrix image 4 index 4 index false 4 index 4 index imagemask BkCol SC imagemask } { pop false 3 1 roll % width height false matrix image imagemask } ifelse } { dup false ne { % have a mask, see if we can use it /languagelevel where { pop languagelevel 3 ge } { false } ifelse } { false } ifelse { % languagelevel3, we can use image mask and dicts % store the image mask /ma exch d % select colorspace according to 8|24 bit depth and set the decode array /dc 8 eq { /dc [0 1] d /DeviceGray } { /dc [0 1 0 1 0 1] d /DeviceRGB } ifelse setcolorspace % the image data /im exch d % transformation matrix /mt exch d % width and height /h exch def /w exch def % the image dict /id 7 dict dup begin /ImageType 1 d /Width w d /Height h d /ImageMatrix mt d /DataSource im d /BitsPerComponent 8 d /Decode dc d end d % the mask dictionary /md 7 dict dup begin /ImageType 1 d /Width w d /Height h d /ImageMatrix mt d /DataSource ma d /BitsPerComponent 1 d /Decode [0 1] d end d % and the combined image dict 4 dict dup begin /ImageType 3 d /DataDict id d /MaskDict md d /InterleaveType 3 d end image } { pop % no mask or can't use it, get rid of it 8 % width height image 8|24 8 matrix 4 1 roll 8 eq { % grayscale image } { %color QCI } ifelse } ifelse } ifelse grestore } d /BF { % brush fill gsave BSt 1 eq % solid brush? { BCol SC WFi { fill } { eofill } ifelse } if BSt 2 ge BSt 8 le and % dense pattern? { BDArr BSt 2 sub get /sc ED % the following line scales the brush color according to the pattern. the higher the pattern the lighter the color. BCol { 1. exch sub sc mul 1. exch sub } forall 3 array astore SC WFi { fill } { eofill } ifelse } if BSt 9 ge BSt 14 le and % brush pattern? { WFi { clip } { eoclip } ifelse defM SM pathbbox % left upper right lower 3 index 3 index translate 4 2 roll % right lower left upper 3 2 roll % right left upper lower exch % left right lower upper sub /h ED sub /w ED OMo { NP 0 0 MT 0 h RL w 0 RL 0 h neg RL CP BkCol SC fill } if BCol SC 0.3 SW NP BSt 9 eq BSt 11 eq or % horiz or cross pattern { 0 4 h { dup 0 exch MT w exch LT } for } if BSt 10 eq BSt 11 eq or % vert or cross pattern { 0 4 w { dup 0 MT h LT } for } if BSt 12 eq BSt 14 eq or % F-diag or diag cross { w h gt { 0 6 w h add { dup 0 MT h sub h LT } for } { 0 6 w h add { dup 0 exch MT w sub w exch LT } for } ifelse } if BSt 13 eq BSt 14 eq or % B-diag or diag cross { w h gt { 0 6 w h add { dup h MT h sub 0 LT } for } { 0 6 w h add { dup w exch MT w sub 0 exch LT } for } ifelse } if S } if BSt 24 eq % CustomPattern { } if grestore } D % for arc /mat matrix d /ang1 D0 /ang2 D0 /w D0 /h D0 /x D0 /y D0 /ARC { % Generic ARC function [ X Y W H ang1 ang2 ] /ang2 ED /ang1 ED /h ED /w ED /y ED /x ED mat CM pop x w 2 div add y h 2 div add TR 1 h w div neg scale ang2 0 ge {0 0 w 2 div ang1 ang1 ang2 add arc } {0 0 w 2 div ang1 ang1 ang2 add arcn} ifelse mat SM } D /C D0 /P { % PdcDrawPoint [x y] NP MT 0.5 0.5 rmoveto 0 -1 RL -1 0 RL 0 1 RL CP fill } D /M { % PdcMoveTo [x y] /Cy ED /Cx ED } D /L { % PdcLineTo [x y] NP Cx Cy MT /Cy ED /Cx ED Cx Cy LT QS } D /DL { % PdcDrawLine [x1 y1 x0 y0] NP MT LT QS } D /HL { % PdcDrawLine [x1 y x0] 1 index DL } D /VL { % PdcDrawLine [x y1 y0] 2 index exch DL } D /R { % PdcDrawRect [x y w h] /h ED /w ED /y ED /x ED NP x y MT 0 h RL w 0 RL 0 h neg RL CP BF QS } D /ACR { % add clip rect /h ED /w ED /y ED /x ED x y MT 0 h RL w 0 RL 0 h neg RL CP } D /xr D0 /yr D0 /rx D0 /ry D0 /rx2 D0 /ry2 D0 /RR { % PdcDrawRoundRect [x y w h xr yr] /yr ED /xr ED /h ED /w ED /y ED /x ED xr 0 le yr 0 le or {x y w h R} % Do rect if one of rounding values is less than 0. {xr 100 ge yr 100 ge or {x y w h E} % Do ellipse if both rounding values are larger than 100 { /rx xr w mul 200 div d /ry yr h mul 200 div d /rx2 rx 2 mul d /ry2 ry 2 mul d NP x rx add y MT x y rx2 ry2 180 -90 x y h add ry2 sub rx2 ry2 270 -90 x w add rx2 sub y h add ry2 sub rx2 ry2 0 -90 x w add rx2 sub y rx2 ry2 90 -90 ARC ARC ARC ARC CP BF QS } ifelse } ifelse } D /E { % PdcDrawEllipse [x y w h] /h ED /w ED /y ED /x ED mat CM pop x w 2 div add y h 2 div add translate 1 h w div scale NP 0 0 w 2 div 0 360 arc mat SM BF QS } D /A { % PdcDrawArc [x y w h ang1 ang2] 16 div exch 16 div exch NP ARC QS } D /PIE { % PdcDrawPie [x y w h ang1 ang2] /ang2 ED /ang1 ED /h ED /w ED /y ED /x ED NP x w 2 div add y h 2 div add MT x y w h ang1 16 div ang2 16 div ARC CP BF QS } D /CH { % PdcDrawChord [x y w h ang1 ang2] 16 div exch 16 div exch NP ARC CP BF QS } D /BZ { % PdcDrawCubicBezier [4 points] curveto QS } D /CRGB { % Compute RGB [R G B] => R/255 G/255 B/255 255 div 3 1 roll 255 div 3 1 roll 255 div 3 1 roll } D /BC { % PdcSetBkColor [R G B] CRGB BkCol astore pop } D /BR { % PdcSetBrush [style R G B] CRGB BCol astore pop /BSt ED } D /WB { % set white solid brush 1 W BR } D /NB { % set nobrush 0 B BR } D /PE { % PdcSetPen [style width R G B Cap Join] setlinejoin setlinecap CRGB PCol astore pop /LWi ED /PSt ED LWi 0 eq { 0.25 /LWi ED } if % ### 3.0 remove this line PCol SC } D /P1 { % PdcSetPen [R G B] 1 0 5 2 roll 0 0 PE } D /ST { % SET TRANSFORM [matrix] defM setmatrix concat } D %% Font handling % the next three commands are for defining fonts. The first one % tries to find the most suitable printer font out of a fontlist. % if encoding is false the default one will be used. /MF { % newname encoding fontlist % this function tries to find a suitable postscript font. % We try quite hard not to get courier for a % proportional font. The following takes an array of fonts. % The algorithm will take the first font that % gives a match (defined as not resulting in a courier font). % each entry in the table is an array of the form [ /Fontname x-stretch slant ] % x-strtch can be used to stretch/squeeze the font in x direction. % This gives better results when eg substituting helvetica for arial % slant is an optional slant. 0 is non slanted, 0.2 is a typical value for a syntetic oblique. % encoding can be either an encoding vector of false if the default font encoding is requested. true exch true exch % push a dummy on the stack, { % so the loop over the array will leave a font in any case when exiting. exch pop exch pop % (dummy | oldfont) (dummy | fontdict) fontarray dup 0 get dup findfont % get the fontname from the array and load it dup /FontName get % see if the font exists 3 -1 roll eq { % see if fontname and the one provided are equal exit } if } forall exch % font fontarray % newname encoding font fontarray defines a postscript font dup 1 get /fxscale exch def % define scale, sland and encoding 2 get /fslant exch def exch /fencoding exch def [ fxscale 0 fslant 1 0 0 ] makefont % transform font accordingly fencoding false eq { % check if we have an encoding and use it if available } { dup maxlength dict begin % copy font { 1 index /FID ne % don't copy FID, as it's not allowed in PS Level 1 {def}{pop pop}ifelse } forall /Encoding fencoding def % replace encoding currentdict end } ifelse definefont pop } D % an embedded font. This is used for the base fonts of the composite font used later on. /MFEmb { % newname encoding fontname findfont dup length dict begin { 1 index /FID ne {d}{pop pop}ifelse } forall /Encoding ED currentdict end definefont pop } D % DF: define font % used to get a scaled version of an already loaded font % % newname pointsize fontmame DF - /DF { findfont % get the fontsize on top of the stack and define font matrix /fs 3 -1 roll d [ fs 0 0 fs -1 mul 0 0 ] makefont d } D /ty 0 d /Y { /ty ED } D /Tl { % draw underline/strikeout line: () w x y lw ->Tl-> () w x gsave setlinewidth NP 1 index exch MT 1 index 0 rlineto stroke grestore } D /XYT { % [string [x/y displacement array] width x] ty MT % pops x /xyshow where { % interpreter has xyshow pop pop xyshow } { % use ashow exch pop % string cwidth 1 index % string cwidth string dup length 2 div exch % string cwidth length string !have to divide by 2 since we use unicode! stringwidth pop % string cwidth length pwidth 3 -1 roll % string length pwidth cwidth exch sub exch div % string extraperchar exch 0 exch % extraperchar 0 string ashow } ifelse } D /AT { ty MT % pops x 1 index % string cwidth string dup length 2 div exch % string cwidth length string !have to divide by 2 since we use unicode! stringwidth pop % string cwidth length pwidth 3 -1 roll % string length pwidth cwidth exch sub exch div % string extraperchar exch 0 exch % extraperchar 0 string ashow } D %% start of page /QI { /C save d pageinit /Cx 0 d % reset current x position /Cy 0 d % reset current y position /OMo false d } D %% end of page /QP { % show page C restore showpage } D % merges one key value pair into the page device dict % % key value SPD - /SPD { /setpagedevice where { 1 dict dup begin 3 1 roll def end setpagedevice } { pop pop } ifelse } D /SV { % Save painter state BSt LWi PSt Cx Cy WFi OMo BCol PCol BkCol /nS nS 1 add d gsave } D /RS { % Restore painter state nS 0 gt { grestore /BkCol ED /PCol ED /BCol ED /OMo ED /WFi ED /Cy ED /Cx ED /PSt ED /LWi ED /BSt ED /nS nS 1 sub d } if } D /CLSTART { % clipping start /clipTmp matrix CM d % save current matrix defM SM % Page default matrix NP } D /CLEND { % clipping end clip NP clipTmp SM % restore the current matrix } D /CLO { % clipping off grestore % restore top of page state gsave % save it back again defM SM % set coordsys (defensive progr.) } D