/**************************************************************************** ** ** Documentation on the xml module ** ** Copyright (C) 2005-2008 Trolltech ASA. All rights reserved. ** ** This file is part of the TQt GUI Toolkit. ** ** This file may be used under the terms of the GNU General ** Public License versions 2.0 or 3.0 as published by the Free ** Software Foundation and appearing in the files LICENSE.GPL2 ** and LICENSE.GPL3 included in the packaging of this file. ** Alternatively you may (at your option) use any later version ** of the GNU General Public License if such license has been ** publicly approved by Trolltech ASA (or its successors, if any) ** and the KDE Free TQt Foundation. ** ** Please review the following information to ensure GNU General ** Public Licensing requirements will be met: ** http://trolltech.com/products/qt/licenses/licensing/opensource/. ** If you are unsure which license is appropriate for your use, please ** review the following information: ** http://trolltech.com/products/qt/licenses/licensing/licensingoverview ** or contact the sales department at sales@trolltech.com. ** ** This file may be used under the terms of the Q Public License as ** defined by Trolltech ASA and appearing in the file LICENSE.QPL ** included in the packaging of this file. Licensees holding valid Qt ** Commercial licenses may use this file in accordance with the Qt ** Commercial License Agreement provided with the Software. ** ** This file is provided "AS IS" with NO WARRANTY OF ANY KIND, ** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR ** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted ** herein. ** **********************************************************************/ /*! \page xml.html \title XML Module \if defined(commercial) This module is part of the \link commercialeditions.html TQt Enterprise Edition\endlink. \endif \tableofcontents \target overview \section1 Overview of the XML architecture in Qt The XML module provides a well-formed XML parser using the SAX2 (Simple API for XML) interface plus an implementation of the DOM Level 2 (Document Object Model). SAX is an event-based standard interface for XML parsers. The TQt interface follows the design of the SAX2 Java implementation. Its naming scheme was adapted to fit the TQt naming conventions. Details on SAX2 can be found at \link http://www.saxproject.org http://www.saxproject.org \endlink. Support for SAX2 filters and the reader factory are under development. The TQt implementation does not include the SAX1 compatibility classes present in the Java interface. For an introduction to Qt's SAX2 classes see "\link #sax2 The TQt SAX2 classes \endlink". DOM Level 2 is a W3C Recommendation for XML interfaces that maps the constituents of an XML document to a tree structure. Details and the specification of DOM Level 2 can be found at \link http://www.w3.org/DOM/ http://www.w3.org/DOM/ \endlink. More information about the DOM classes in TQt is provided in the \link #dom TQt DOM classes \endlink. Qt provides the following XML related classes: \table \header \i Class \i Short description \row \i \l QDomAttr \i Represents one attribute of a QDomElement \row \i \l QDomCDATASection \i Represents an XML CDATA section \row \i \l QDomCharacterData \i Represents a generic string in the DOM \row \i \l QDomComment \i Represents an XML comment \row \i \l QDomDocument \i The representation of an XML document \row \i \l QDomDocumentFragment \i Tree of QDomNodes which is usually not a complete QDomDocument \row \i \l QDomDocumentType \i The representation of the DTD in the document tree \row \i \l QDomElement \i Represents one element in the DOM tree \row \i \l QDomEntity \i Represents an XML entity \row \i \l QDomEntityReference \i Represents an XML entity reference \row \i \l QDomImplementation \i Information about the features of the DOM implementation \row \i \l QDomNamedNodeMap \i Collection of nodes that can be accessed by name \row \i \l QDomNode \i The base class for all nodes of the DOM tree \row \i \l QDomNodeList \i List of QDomNode objects \row \i \l QDomNotation \i Represents an XML notation \row \i \l QDomProcessingInstruction \i Represents an XML processing instruction \row \i \l QDomText \i Represents textual data in the parsed XML document \row \i \l QXmlAttributes \i XML attributes \row \i \l QXmlContentHandler \i Interface to report logical content of XML data \row \i \l QXmlDeclHandler \i Interface to report declaration content of XML data \row \i \l QXmlDefaultHandler \i Default implementation of all XML handler classes \row \i \l QXmlDTDHandler \i Interface to report DTD content of XML data \row \i \l QXmlEntityResolver \i Interface to resolve extern entities contained in XML data \row \i \l QXmlErrorHandler \i Interface to report errors in XML data \row \i \l QXmlInputSource \i The input data for the QXmlReader subclasses \row \i \l QXmlLexicalHandler \i Interface to report lexical content of XML data \row \i \l QXmlLocator \i The XML handler classes with information about the actual parsing position \row \i \l QXmlNamespaceSupport \i Helper class for XML readers which want to include namespace support \row \i \l QXmlParseException \i Used to report errors with the QXmlErrorHandler interface \row \i \l QXmlReader \i Interface for XML readers (i.e. for SAX2 parsers) \row \i \l QXmlSimpleReader \i Implementation of a simple XML reader (a SAX2 parser) \endtable \target sax2 \section1 The TQt SAX2 classes \target sax2Intro \section2 Introduction to SAX2 The SAX2 interface is an event-driven mechanism to provide the user with document information. An "event" in this context means something reported by the parser, for example, it has encountered a start tag, or an end tag, etc. To make it less abstract consider the following example: \code A quotation. \endcode Whilst reading (a SAX2 parser is usually referred to as "reader") the above document three events would be triggered: \list 1 \i A start tag occurs (\c{}). \i Character data (i.e. text) is found, "A quotation.". \i An end tag is parsed (\c{}). \endlist Each time such an event occurs the parser reports it; you can set up event handlers to respond to these events. Whilst this is a fast and simple approach to read XML documents, manipulation is difficult because data is not stored, simply handled and discarded serially. The \link #dom DOM interface \endlink reads in and stores the whole document in a tree structure; this takes more memory, but makes it easier to manipulate the document's structure.. The TQt XML module provides an abstract class, \l QXmlReader, that defines the interface for potential SAX2 readers. TQt includes a reader implementation, \l QXmlSimpleReader, that is easy to adapt through subclassing. The reader reports parsing events through special handler classes: \table \header \i Handler class \i Description \row \i \l QXmlContentHandler \i Reports events related to the content of a document (e.g. the start tag or characters). \row \i \l QXmlDTDHandler \i Reports events related to the DTD (e.g. notation declarations). \row \i \l QXmlErrorHandler \i Reports errors or warnings that occurred during parsing. \row \i \l QXmlEntityResolver \i Reports external entities during parsing and allows users to resolve external entities themselves instead of leaving it to the reader. \row \i \l QXmlDeclHandler \i Reports further DTD related events (e.g. attribute declarations). \row \i \l QXmlLexicalHandler \i Reports events related to the lexical structure of the document (the beginning of the DTD, comments etc.). \endtable These classes are abstract classes describing the interface. The \l QXmlDefaultHandler class provides a "do nothing" default implementation for all of them. Therefore users only need to overload the QXmlDefaultHandler functions they are interested in. To read input XML data a special class \l QXmlInputSource is used. Apart from those already mentioned, the following SAX2 support classes provide additional useful functionality: \table \header \i Class \i Description \row \i \l QXmlAttributes \i Used to pass attributes in a start element event. \row \i \l QXmlLocator \i Used to obtain the actual parsing position of an event. \row \i \l QXmlNamespaceSupport \i Used to implement \link xml.html#namespaces namespace\endlink support for a reader. Note that namespaces do not change the parsing behavior. They are only reported through the handler. \endtable \target sax2Features \section2 Features The behaviour of an XML reader depends on its support for certain optional features. For example, a reader may have the feature "report attributes used for \link xml.html#namespaces namespace\endlink declarations and prefixes along with the local name of a tag". Like every other feature this has a unique name represented by a URI: it is called \e http://xml.org/sax/features/namespace-prefixes. The TQt SAX2 implementation can report whether the reader has particular functionality using the \l QXmlReader::hasFeature() function. Available features can be tested with QXmlReader::feature(), and switched on or off using \l QXmlReader::setFeature(). Consider the example \code \endcode A reader that does not support the \e http://xml.org/sax/features/namespace-prefixes feature would report the element name \e document but not its attributes \e xmlns:book and \e xmlns with their values. A reader with the feature \e http://xml.org/sax/features/namespace-prefixes reports the namespace attributes if the \link QXmlReader::feature() feature\endlink is switched on. Other features include \e http://xml.org/sax/features/namespace (namespace processing, implies \e http://xml.org/sax/features/namespace-prefixes) and \e http://xml.org/sax/features/validation (the ability to report validation errors). Whilst SAX2 leaves it to the user to define and implement whatever features are required, support for \e http://xml.org/sax/features/namespace (and thus \e http://xml.org/sax/features/namespace-prefixes) is mandantory. The \l QXmlSimpleReader implementation of \l QXmlReader, supports them, and can do namespace processing. \l QXmlSimpleReader is not validating, so it does not support \e http://xml.org/sax/features/validation. \target sax2Namespaces \section2 Namespace support via features As we have seen in the \link #sax2Features previous section\endlink we can configure the behavior of the reader when it comes to namespace processing. This is done by setting and unsetting the \e http://xml.org/sax/features/namespaces and \e http://xml.org/sax/features/namespace-prefixes features. They influence the reporting behavior in the following way: \list 1 \i Namespace prefixes and local parts of elements and attributes can be reported. \i The qualified names of elements and attributes are reported. \i \l QXmlContentHandler::startPrefixMapping() and \l QXmlContentHandler::endPrefixMapping() are called by the reader. \i Attributes that declare namespaces (i.e. the attribute \e xmlns and attributes starting with \e{xmlns:}) are reported. \endlist Consider the following element: \code \endcode With \e http://xml.org/sax/features/namespace-prefixes set to TRUE the reader will report four attributes; but with the \e namespace-prefixes feature set to FALSE only three, with the \e xmlns:fnord attribute defining a namespace being "invisible" to the reader. The \e http://xml.org/sax/features/namespaces feature is responsible for reporting local names, namespace prefixes and URIs. With \e http://xml.org/sax/features/namespaces set to TRUE the parser will report \e title as the local name of the \e fnord:title attribute, \e fnord being the namespace prefix and \e http://trolltech.com/fnord/ as the namespace URI. When \e http://xml.org/sax/features/namespaces is FALSE none of them are reported. In the current implementation the TQt XML classes follow the definition that the prefix \e xmlns itself isn't associated with any namespace at all (see \link http://www.w3.org/TR/1999/REC-xml-names-19990114/#ns-using http://www.w3.org/TR/1999/REC-xml-names-19990114/#ns-using \endlink). Therefore even with \e http://xml.org/sax/features/namespaces and \e http://xml.org/sax/features/namespace-prefixes both set to TRUE the reader won't return either a local name, a namespace prefix or a namespace URI for \e xmlns:fnord. This might be changed in the future following the W3C suggestion \link http://www.w3.org/2000/xmlns/ http://www.w3.org/2000/xmlns/ \endlink to associate \e xmlns with the namespace \e http://www.w3.org/2000/xmlns. As the SAX2 standard suggests, \l QXmlSimpleReader defaults to having \e http://xml.org/sax/features/namespaces set to TRUE and \e http://xml.org/sax/features/namespace-prefixes set to FALSE. When changing this behavior using \l QXmlSimpleReader::setFeature() note that the combination of both features set to FALSE is illegal. For a practical demonstration of how the two features affect the output of the reader run the \link tagreader-with-features-example.html tagreader with features example. \endlink \target sax2NamespacesSummary \section3 Summary \l QXmlSimpleReader implements the following behavior: \table \header \i (namespaces, namespace-prefixes) \i Namespace prefix and local part \i Qualified names \i Prefix mapping \i xmlns attributes \row \i (TRUE, FALSE) \i Yes \i Yes* \i Yes \i No \row \i (TRUE, TRUE) \i Yes \i Yes \i Yes \i Yes \row \i (FALSE, TRUE) \i No* \i Yes \i No* \i Yes \row \i (FALSE, FALSE) \i41 Illegal \endtable * The behavior of these entries is not specified by SAX. \target sax2Properties \section2 Properties Properties are a more general concept. They have a unique name, represented as an URI, but their value is \c void*. Thus nearly anything can be used as a property value. This concept involves some danger, though: there is no means of ensuring type-safety; the user must take care that they pass the right type. Properties are useful if a reader supports special handler classes. The URIs used for features and properties often look like URLs, e.g. \c http://xml.org/sax/features/namespace. This does not mean that the data required is at this address. It is simply a way of defining unique names. Anyone can define and use new SAX2 properties for their readers. Property support is not mandatory. To set or query properties the following functions are provided: \l QXmlReader::setProperty(), \l QXmlReader::property() and \l QXmlReader::hasProperty(). \target sax2Reading \section2 Further reading More information about XML (e.g. \link xml.html#namespaces namespaces \endlink) can be found in the \link xml.html introduction to the TQt XML module. \endlink \target dom \section1 The TQt DOM classes \target domIntro \section2 Introduction to DOM DOM provides an interface to access and change the content and structure of an XML file. It makes a hierarchical view of the document (a tree view). Thus -- in contrast to the SAX2 interface -- an object model of the document is resident in memory after parsing which makes manipulation easy. All DOM nodes in the document tree are subclasses of \l QDomNode. The document itself is represented as a \l QDomDocument object. Here are the available node classes and their potential child classes: \list \i \l QDomDocument: Possible children are \list \i \l QDomElement (at most one) \i \l QDomProcessingInstruction \i \l QDomComment \i \l QDomDocumentType \endlist \i \l QDomDocumentFragment: Possible children are \list \i \l QDomElement \i \l QDomProcessingInstruction \i \l QDomComment \i \l QDomText \i \l QDomCDATASection \i \l QDomEntityReference \endlist \i \l QDomDocumentType: No children \i \l QDomEntityReference: Possible children are \list \i \l QDomElement \i \l QDomProcessingInstruction \i \l QDomComment \i \l QDomText \i \l QDomCDATASection \i \l QDomEntityReference \endlist \i \l QDomElement: Possible children are \list \i \l QDomElement \i \l QDomText \i \l QDomComment \i \l QDomProcessingInstruction \i \l QDomCDATASection \i \l QDomEntityReference \endlist \i \l QDomAttr: Possible children are \list \i \l QDomText \i \l QDomEntityReference \endlist \i \l QDomProcessingInstruction: No children \i \l QDomComment: No children \i \l QDomText: No children \i \l QDomCDATASection: No children \i \l QDomEntity: Possible children are \list \i \l QDomElement \i \l QDomProcessingInstruction \i \l QDomComment \i \l QDomText \i \l QDomCDATASection \i \l QDomEntityReference \endlist \i \l QDomNotation: No children \endlist With \l QDomNodeList and \l QDomNamedNodeMap two collection classes are provided: \l QDomNodeList is a list of nodes, and \l QDomNamedNodeMap is used to handle unordered sets of nodes (often used for attributes). The \l QDomImplementation class allows the user to query features of the DOM implementation. \section2 Further reading To get started please refer to the \l QDomDocument documentation. \target namespaces \section1 An introduction to namespaces Parts of the TQt XML module documentation assume that you are familiar with XML namespaces. Here we present a brief introduction; skip to \link #namespacesConventions TQt XML documentation conventions \endlink if you already know this material. Namespaces are a concept introduced into XML to allow a more modular design. With their help data processing software can easily resolve naming conflicts in XML documents. Consider the following example: \code Practical XML A Namespace Called fnord \endcode Here we find three different uses of the name \e title. If you wish to process this document you will encounter problems because each of the \e titles should be displayed in a different manner -- even though they have the same name. The solution would be to have some means of identifying the first occurrence of \e title as the title of a book, i.e. to use the \e title element of a book namespace to distinguish it from, for example, the chapter title, e.g.: \code Practical XML \endcode \e book in this case is a \e prefix denoting the namespace. Before we can apply a namespace to element or attribute names we must declare it. Namespaces are URIs like \e http://trolltech.com/fnord/book/. This does not mean that data must be available at this address; the URI is simply used to provide a unique name. We declare namespaces in the same way as attributes; strictly speaking they \e are attributes. To make for example \e http://trolltech.com/fnord/ the document's default XML namespace \e xmlns we write \code xmlns="http://trolltech.com/fnord/" \endcode To distinguish the \e http://trolltech.com/fnord/book/ namespace from the default, we must supply it with a prefix: \code xmlns:book="http://trolltech.com/fnord/book/" \endcode A namespace that is declared like this can be applied to element and attribute names by prepending the appropriate prefix and a ":" delimiter. We have already seen this with the \e book:title element. Element names without a prefix belong to the default namespace. This rule does not apply to attributes: an attribute without a prefix does not belong to any of the declared XML namespaces at all. Attributes always belong to the "traditional" namespace of the element in which they appear. A "traditional" namespace is not an XML namespace, it simply means that all attribute names belonging to one element must be different. Later we will see how to assign an XML namespace to an attribute. Due to the fact that attributes without prefixes are not in any XML namespace there is no collision between the attribute \e title (that belongs to the \e author element) and for example the \e title element within a \e chapter. Let's clarify this with an example: \code Practical XML A Namespace Called fnord \endcode Within the \e document element we have two namespaces declared. The default namespace \e http://trolltech.com/fnord/ applies to the \e book element, the \e chapter element, the appropriate \e title element and of course to \e document itself. The \e book:author and \e book:title elements belong to the namespace with the URI \e http://trolltech.com/fnord/book/. The two \e book:author attributes \e title and \e name have no XML namespace assigned. They are only members of the "traditional" namespace of the element \e book:author, meaning that for example two \e title attributes in \e book:author are forbidden. In the above example we circumvent the last rule by adding a \e title attribute from the \e http://trolltech.com/fnord/ namespace to \e book:author: the \e fnord:title comes from the namespace with the prefix \e fnord that is declared in the \e book:author element. Clearly the \e fnord namespace has the same namespace URI as the default namespace. So why didn't we simply use the default namespace we'd already declared? The answer is quite complex: \list \i attributes without a prefix don't belong to any XML namespace at all, not even to the default namespace; \i additionally omitting the prefix would lead to a \e title-title clash; \i writing it as \e xmlns:title would declare a new namespace with the prefix \e title instead of applying the default \e xmlns namespace. \endlist With the TQt XML classes elements and attributes can be accessed in two ways: either by refering to their qualified names consisting of the namespace prefix and the "real" name (or \e local name) or by the combination of local name and namespace URI. More information on XML namespaces can be found at \l http://www.w3.org/TR/REC-xml-names/. \target namespacesConventions \section2 Conventions used in TQt XML documentation The following terms are used to distinguish the parts of names within the context of namespaces: \list \i The \e {qualified name} is the name as it appears in the document. (In the above example \e book:title is a qualified name.) \i A \e {namespace prefix} in a qualified name is the part to the left of the ":". (\e book is the namespace prefix in \e book:title.) \i The \e {local part} of a name (also refered to as the \e {local name}) appears to the right of the ":". (Thus \e title is the local part of \e book:title.) \i The \e {namespace URI} ("Uniform Resource Identifier") is a unique identifier for a namespace. It looks like a URL (e.g. \e http://trolltech.com/fnord/ ) but does not require data to be accessible by the given protocol at the named address. \endlist Elements without a ":" (like \e chapter in the example) do not have a namespace prefix. In this case the local part and the qualified name are identical (i.e. \e chapter). */