The QUrlOperator class provides common operations on URLs.
.PP
This class operates on hierarchical structures (such as filesystems) using URLs. Its API facilitates all the common operations: <center>.nf
.TS
l - l. Operation Function List files listChildren() Make a directory mkdir() Remove a file remove() Rename a file rename() Get a file get() Put a file put() Copy a file
.TE
.fi
</center>
.PP
You can obtain additional information about the URL with isDir() and info(). If a directory is to be traversed using listChildren(), a name filter can be set with setNameFilter().
.PP
A QUrlOperator can be used like this, for example to download a file (and assuming that the FTP protocol is registered):
If you want to be notified about success/failure, progress, etc., you can connect to QUrlOperator's signals, e.g. to start(), newChildren(), createdDirectory(), removed(), data(), dataTransferProgress(), startedNextCopy(), connectionStateChanged(), finished(), etc. A network operation can be stopped with stop().
.PP
The class uses the functionality of registered network protocols to perform these operations. Depending of the protocol of the URL, it uses an appropriate network protocol class for the operations. Each of the operation functions of QUrlOperator creates a QNetworkOperation object that describes the operation and puts it into the operation queue for the network protocol used. If no suitable protocol could be found (because no implementation of the necessary network protocol is registered), the URL operator emits errors. Not every protocol supports every operation, but error handling deals with this problem.
Constructs a QUrlOperator. The URL on which this QUrlOperator operates is constructed out of the arguments \fIurl\fR, \fIrelUrl\fR and \fIcheckSlash\fR: see the corresponding QUrl constructor for an explanation of these arguments.
This signal is emitted whenever the URL operator's connection state changes. \fIstate\fR describes the new state, which is a QNetworkProtocol::ConnectionState value.
.PP
\fIdata\fR is a string that describes the change of the connection. This can be used to display a message to the user.
Copies the file \fIfrom\fR to \fIto\fR. If \fImove\fR is TRUE, the file is moved (copied and removed). \fIfrom\fR must point to a file and \fIto\fR must point to a directory (into which \fIfrom\fR is copied) unless \fItoPath\fR is set to FALSE. If \fItoPath\fR is set to FALSE then the \fIto\fR variable is assumed to be the absolute file path (destination file path + file name). The copying is done using the get() and put() operations. If you want to be notified about the progress of the operation, connect to the dataTransferProgress() signal. Bear in mind that the get() and put() operations emit this signal through the QUrlOperator. The number of transferred bytes and the total bytes that you receive as arguments in this signal do not relate to the the whole copy operation; they relate first to the get() and then to the put() operation. Always check what type of operation the signal comes from; this is given in the signal's last argument.
.PP
At the end, finished() (with success or failure) is emitted, so check the state of the network operation object to see whether or not the operation was successful.
.PP
Because a move or copy operation consists of multiple operations (get(), put() and maybe remove()), this function doesn't return a single QNetworkOperation, but rather a list of them. They are in the order: get(), put() and (if applicable) remove().
This is an overloaded member function, provided for convenience. It behaves essentially like the above function.
.PP
Copies the \fIfiles\fR to the directory \fIdest\fR. If \fImove\fR is TRUE the files are moved, not copied. \fIdest\fR must point to a directory.
.PP
This function calls copy() for each entry in \fIfiles\fR in turn. You don't get a result from this function; each time a new copy begins, startedNextCopy() is emitted, with a list of QNetworkOperations that describe the new copy operation.
.SH "void QUrlOperator::createdDirectory ( const QUrlInfo & i, QNetworkOperation * op )\fC [signal]\fR"
This signal is emitted when mkdir() succeeds and the directory has been created. \fIi\fR holds the information about the new directory.
.PP
\fIop\fR is a pointer to the operation object, which contains all the information about the operation, including the state. \fCop->arg(0)\fR holds the new directory's name.
This signal is emitted when new \fIdata\fR has been received after calling get() or put(). \fIop\fR is a pointer to the operation object which contains all the information about the operation, including the state. \fCop->arg(0)\fR holds the name of the file whose data is retrieved and op->rawArg(1) holds the (raw) data.
.PP
See also QNetworkOperation and QNetworkProtocol.
.SH "void QUrlOperator::dataTransferProgress ( int bytesDone, int bytesTotal, QNetworkOperation * op )\fC [signal]\fR"
This signal is emitted during data transfer (using put() or get()). \fIbytesDone\fR specifies how many bytes of \fIbytesTotal\fR have been transferred. More information about the operation is stored in \fIop\fR, a pointer to the network operation that is processed. \fIbytesTotal\fR may be -1, which means that the total number of bytes is not known.
.SH "void QUrlOperator::finished ( QNetworkOperation * op )\fC [signal]\fR"
This signal is emitted when an operation of some sort finishes, whether with success or failure. \fIop\fR is a pointer to the operation object, which contains all the information, including the state, of the operation which has been finished. Check the state and error code of the operation object to see whether or not the operation was successful.
Tells the network protocol to get data from \fIlocation\fR or, if this is TQString::null, to get data from the location to which this URL points (see QUrl::fileName() and QUrl::encodedPathAndQuery()). What happens then depends on the network protocol. The data() signal is emitted when data comes in. Because it's unlikely that all data will come in at once, it is common for multiple data() signals to be emitted. The dataTransferProgress() signal is emitted while processing the operation. At the end, finished() (with success or failure) is emitted, so check the state of the network operation object to see whether or not the operation was successful.
If \fIlocation\fR is TQString::null, the path of this QUrlOperator should point to a file when you use this operation. If \fIlocation\fR is not empty, it can be a relative URL (a child of the path to which the QUrlOperator points) or an absolute URL.
If \fIlocation\fR is not empty and relative it must not contain any queries or references, just the name of a child. So if you need to specify a query or reference, do it as shown in the first example or specify the full URL (such as http://www.whatever.org/cgi-bin/search.pl?cmd=Hello) as \fIlocation\fR.
Returns the URL information for the child \fIentry\fR, or returns an empty QUrlInfo object if there is no information available about \fIentry\fR. Information about \fIentry\fR is only available after a successfully finished listChildren() operation.
Returns TRUE if the URL is a directory; otherwise returns FALSE. This may not always work correctly, if the protocol of the URL is something other than file (local filesystem). If you pass a bool pointer as the \fIok\fR argument, \fI*ok\fR is set to TRUE if the result of this function is known to be correct, and to FALSE otherwise.
.SH "void QUrlOperator::itemChanged ( QNetworkOperation * op )\fC [signal]\fR"
This signal is emitted whenever a file which is a child of the URL has been changed, for example by successfully calling rename(). \fIop\fR is a pointer to the operation object which contains all the information about the operation, including the state. \fCop->arg(0)\fR holds the original file name and \fCop->arg(1)\fR holds the new file name (if it was changed).
Starts listing the children of this URL (e.g. the files in the directory). The start() signal is emitted before the first entry is listed and finished() is emitted after the last one. The newChildren() signal is emitted for each list of new entries. If an error occurs, the signal finished() is emitted, so be sure to check the state of the network operation pointer.
.PP
Because the operation may not be executed immediately, a pointer to the QNetworkOperation object created by this function is returned. This object contains all the data about the operation and is used to refer to this operation later (e.g. in the signals that are emitted by the QUrlOperator). The return value can also be 0 if the operation object couldn't be created.
.PP
The path of this QUrlOperator must to point to a directory (because the children of this directory will be listed), not to a file.
Tries to create a directory (child) with the name \fIdirname\fR. If it is successful, a newChildren() signal with the new child is emitted, and the createdDirectory() signal with the information about the new child is also emitted. The finished() signal (with success or failure) is emitted after the operation has been processed, so check the state of the network operation object to see whether or not the operation was successful.
.PP
Because the operation will not be executed immediately, a pointer to the QNetworkOperation object created by this function is returned. This object contains all the data about the operation and is used to refer to this operation later (e.g. in the signals that are emitted by the QUrlOperator). The return value can also be 0 if the operation object couldn't be created.
.PP
The path of this QUrlOperator must to point to a directory (not a file) because the new directory will be created in this path.
This signal is emitted after listChildren() was called and new children (i.e. files) have been read from a list of files. \fIi\fR holds the information about the new files. \fIop\fR is a pointer to the operation object which contains all the information about the operation, including the state.
This function tells the network protocol to put \fIdata\fR in \fIlocation\fR. If \fIlocation\fR is empty (TQString::null), it puts the \fIdata\fR in the location to which the URL points. What happens depends on the network protocol. Depending on the network protocol, some data might come back after putting data, in which case the data() signal is emitted. The dataTransferProgress() signal is emitted during processing of the operation. At the end, finished() (with success or failure) is emitted, so check the state of the network operation object to see whether or not the operation was successful.
If \fIlocation\fR is TQString::null, the path of this QUrlOperator should point to a file when you use this operation. If \fIlocation\fR is not empty, it can be a relative (a child of the path to which the QUrlOperator points) or an absolute URL.
Tries to remove the file (child) \fIfilename\fR. If it succeeds the removed() signal is emitted. finished() (with success or failure) is also emitted after the operation has been processed, so check the state of the network operation object to see whether or not the operation was successful.
.PP
Because the operation will not be executed immediately, a pointer to the QNetworkOperation object created by this function is returned. This object contains all the data about the operation and is used to refer to this operation later (e.g. in the signals that are emitted by the QUrlOperator). The return value can also be 0 if the operation object couldn't be created.
.PP
The path of this QUrlOperator must point to a directory; because if \fIfilename\fR is relative, it will try to remove it in this directory.
.SH "void QUrlOperator::removed ( QNetworkOperation * op )\fC [signal]\fR"
This signal is emitted when remove() has been succesful and the file has been removed.
.PP
\fIop\fR is a pointer to the operation object which contains all the information about the operation, including the state. \fCop->arg(0)\fR holds the name of the file that was removed.
Tries to rename the file (child) called \fIoldname\fR to \fInewname\fR. If it succeeds, the itemChanged() signal is emitted. finished() (with success or failure) is also emitted after the operation has been processed, so check the state of the network operation object to see whether or not the operation was successful.
.PP
Because the operation may not be executed immediately, a pointer to the QNetworkOperation object created by this function is returned. This object contains all the data about the operation and is used to refer to this operation later (e.g. in the signals that are emitted by the QUrlOperator). The return value can also be 0 if the operation object couldn't be created.
.PP
This path of this QUrlOperator must to point to a directory because \fIoldname\fR and \fInewname\fR are handled relative to this directory.
Sets the name filter of the URL to \fInameFilter\fR.
.PP
See also QDir::setNameFilter().
.SH "void QUrlOperator::start ( QNetworkOperation * op )\fC [signal]\fR"
Some operations (such as listChildren()) emit this signal when they start processing the operation. \fIop\fR is a pointer to the operation object which contains all the information about the operation, including the state.
