You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tqt3/doc/changes.doc

454 lines
20 KiB

/****************************************************************************
**
** Change documentation
**
** Copyright (C) 1992-2008 Trolltech ASA. All rights reserved.
**
** This file is part of the TQt GUI Toolkit.
**
** This file may be used under the terms of the GNU General
** Public License versions 2.0 or 3.0 as published by the Free
** Software Foundation and appearing in the files LICENSE.GPL2
** and LICENSE.GPL3 included in the packaging of this file.
** Alternatively you may (at your option) use any later version
** of the GNU General Public License if such license has been
** publicly approved by Trolltech ASA (or its successors, if any)
** and the KDE Free TQt Foundation.
**
** Please review the following information to ensure GNU General
** Public Licensing requirements will be met:
** http://trolltech.com/products/qt/licenses/licensing/opensource/.
** If you are unsure which license is appropriate for your use, please
** review the following information:
** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
** or contact the sales department at sales@trolltech.com.
**
** This file may be used under the terms of the Q Public License as
** defined by Trolltech ASA and appearing in the file LICENSE.QPL
** included in the packaging of this file. Licensees holding valid Qt
** Commercial licenses may use this file in accordance with the Qt
** Commercial License Agreement provided with the Software.
**
** This file is provided "AS IS" with NO WARRANTY OF ANY KIND,
** INCLUDING THE WARRANTIES OF DESIGN, MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE. Trolltech reserves all rights not granted
** herein.
**
**********************************************************************/
/*!
\page keyfeatures30.html
\title Key Features in TQt 3.0
Qt 3.0 adds a lot of new features and improvements over the TQt 2.x
series. Some internals have undergone major redesign and new classes
and methods have been added.
We have tried to keep the API of TQt 3.0 as compatible as possible with
the TQt 2.x series. For most applications only minor changes will be
needed to compile and run them successfully using TQt 3.0.
One of the major new features that has been added in the 3.0 release
is a module allowing you to easily work with databases. The API is
platform independent and database neutral. This module is seamlessly
integrated into TQt Designer, greatly simplifying the process of
building database applications and using data aware widgets.
\omit
Other major new features include a component architecture allowing you
to build cross platform components, 'plugins' with Qt.
\endomit
Other major new features include a plugin architecture. You can use
your own and third party plugins your own applications.
The Unicode support of TQt 2.x has been greatly enhanced, it now
includes full support for scripts written from right to left (e.g.
Arabic and Hebrew) and also provides improved support for Asian
languages.
Many new classes have been added to the TQt Library. Amongst them are
classes that provide a docking architecture
(\l{QDockArea}/\l{QDockWindow}), a powerful rich text editor
(QTextEdit), a class to store and access application settings
(QSettings) and a class to create and communicate with processes
(QProcess).
Apart from the changes in the library itself a lot has been done to
make the development of TQt applications with TQt 3.0 even easier than
before. Two new applications have been added: TQt Linguist is a tool to
help you translate your application into different languages; Qt
Assistant is an easy to use help browser for the TQt documentation that
supports bookmarks and can search by keyword.
Another change concerns the TQt build system, which has been reworked
to make it a lot easier to port TQt to new platforms. You can use this
platform independent build system for your own applications.
\section1 The TQt Library
A large number of new features has been added to TQt 3.0. The following
list gives an overview of the most important new and changed aspects
of the TQt library. A full list of every new method follows the
overview.
\section2 Database support
One of the major new features in TQt 3.0 is the \link sql.html SQL
module\endlink that provides multiplatform access to SQL databases,
making database application programming with TQt seamless and portable.
The API, built with standard SQL, is database-neutral and software
development is independent of the underlying database.
A collection of tightly focused C++ classes are provided to give the
programmer direct access to SQL databases. Developers can send raw SQL
to the database server or have the TQt SQL classes generate SQL queries
automatically. Drivers for Oracle, PostgreSQL, MySQL and ODBC are
available and writing new drivers is straightforward.
Tying the results of SQL queries to GUI components is fully supported
by Qt's SQL widgets. These classes include a tabular data widget
(for spreadsheet-like data presentation with in-place editing), a
form-based data browser (which provides data navigation and edit
functions) and a form-based data viewer (which provides read-only
forms). This framework can be extended by using custom field editors,
allowing for example, a data table to use custom widgets for in-place
editing. The SQL module fully supports Qt's signal/slots mechanism,
making it easy for developers to include their own data validation and
auditing code.
Qt Designer fully supports Qt's SQL module. All SQL widgets can be
laid out within TQt Designer, and relationships can be established
between controls visually. Many interactions can be defined purely in
terms of Qt's signals/slots mechanism directly in TQt Designer.
\omit
\section2 Component model - plugins
The QLibrary class provides a platform independent wrapper for runtime
loading of shared libraries. Access to the shared libraries uses a
COM-like interface. QPluginManager makes it trivial to implement
plugin support in applications. The TQt library is able to load
additional styles, database drivers and text codecs from plugins which
implement the relevant interfaces, e.g. QStyleFactoryInterface,
TQSqlDriverInterface or QTextCodecInterface. It is possible to remove
unused components from the TQt library, and easy to extend any
application with 3rd party styles, database drivers or text codecs.
Qt Designer supports custom widgets in plugins, and will use the
widgets both when designing and previewing forms.
QComponentFactory makes it easy to register any kind of component in a
global database (e.g. the Windows Registry) and to use any registered
component.
\endomit
\section2 Plugins
The QLibrary class provides a platform independent wrapper for runtime
loading of shared libraries. QPluginManager makes it trivial to implement
plugin support in applications. The TQt library is able to load
additional styles, database drivers and text codecs from plugins.
Qt Designer supports custom widgets in plugins, and will use the
widgets both when designing and previewing forms.
See the \link plugins-howto.html plugins documentation\endlink.
\section2 Rich text engine and editor
The rich text engine originally introduced in TQt 2.0 has been further
optimized and extended to support editing. It allows editing formatted
text with different fonts, colors, paragraph styles, tables and
images. The editor supports different word wrap modes, command-based
undo/redo, multiple selections, drag and drop, and many other
features. The new QTextEdit engine is highly optimized for proccesing
and displaying large documents quickly and efficiently.
\section2 Unicode
Apart from the rich text engine, another new feature of TQt 3.0 that
relates to text handling is the greatly improved Unicode support. Qt
3.0 includes an implementation of the bidirectional algorithm (BiDi)
as defined in the Unicode standard and a shaping engine for Arabic,
which gives full native language support to Arabic and Hebrew speaking
people. At the same time the support for Asian languages has been
greatly enhanced.
The support is almost transparent for the developer using TQt to
develop their applications. This means that developers who developed
applications using TQt 2.x will automatically gain the full support for
these languages when switching to TQt 3.0. Developers can rely on their
application to work for people using writing systems different from
Latin1, without having to worry about the complexities involved with
these scripts, as TQt takes care of this automatically.
\section2 Docked and Floating Windows
Qt 3.0 introduces the concept of Dock Windows and Dock Areas. Dock
windows are widgets, that can be attached to, and detached from, dock
areas. The commonest kind of dock window is a tool bar. Any number of
dock windows may be placed in a dock area. A main window can have dock
areas, for example, QMainWindow provides four dock areas (top, left,
bottom, right) by default. The user can freely move dock windows and
place them at a convenient place in a dock area, or drag them out of
the application and have them float freely as top level windows in
their own right. Dock windows can also be minimized or hidden.
For developers, dock windows behave just like ordinary widgets. QToolbar
for example is now a specialized subclass of a dock window. The API
of QMainWindow and QToolBar is source compatible with TQt 2.x, so
existing code which uses these classes will continue to work.
\section2 Regular Expressions
Qt has always provided regular expression support, but that support
was pretty much limited to what was required in common GUI control
elements such as file dialogs. TQt 3.0 introduces a new regular
expression engine, QRegExp, that supports most of Perl's regex
features and is Unicode based. The most useful additions are support
for parentheses (capturing and non-capturing) and backreferences.
\section2 Storing application settings
Most programs will need to store some settings between runs, for
example, user selected fonts, colors and other preferences, or a list
of recently used files. The new QSettings class provides a platform
independent way to achieve this goal. The API makes it easy to store
and retrieve most of the basic data types used in TQt (such as basic
C++ types, strings, lists, colors, etc). The class uses the registry
on the Windows platform and traditional resource files on Unix.
\section2 Creating and controlling other processes
QProcess is a class that allows you to start other programs from
within a TQt application in a platform independent manner. It gives you
full control over the started program, for example you can redirect
the input and output of console applications.
\section2 Accessibility
Accessibility means making software usable and accessible to a wide
range of users, including those with disabilities. In TQt 3.0, most
widgets provide accessibility information for assistive tools that can
be used by a wide range of disabled users. TQt standard widgets like
buttons or range controls are fully supported. Support for complex
widgets, like e.g. QListView, is in development. Existing applications
that make use of standard widgets will become accessible just by using
Qt 3.0.
Qt uses the Active Accessibility infrastructure on Windows, and needs
the MSAA SDK, which is part of most platform SDKs. With improving
standardization of accessibility on other platforms, TQt will support
assistive technologies on other systems, too.
\section2 XML Improvements
The XML framework introduced in TQt 2.2 has been vastly improved. Qt
2.2 already supported level 1 of the Document Object Model (DOM), a
W3C standard for accessing and modifying XML documents. TQt 3.0 has
added support for DOM Level 2 and XML namespaces.
The XML parser has been extended to allow incremental parsing of XML
documents. This allows you to start parsing the document directly
after the first parts of the data have arrived, and to continue
whenever new data is available. This is especially useful if the XML
document is read from a slow source, e.g. over the network, as it
allows the application to start working on the data at a very early
stage.
\section2 SVG support
SVG is a W3C standard for "Scalable Vector Graphics". TQt 3.0's XML
support means that QPicture can optionally generate and import static
SVG documents. All the SVG features that have an equivalent in
QPainter are supported.
\section2 Multihead support
Many professional applications, such as DTP and CAD software, are able
to display data on two or more monitors. In TQt 3.0 the QDesktopWidget
class provides the application with runtime information about the
number and geometry of the desktops on the different monitors and such
allows applications to efficiently use a multi-monitor setup.
The virtual desktop of Mac OS X, Windows 98, and 2000 is supported, as well
as the traditional multi-screen and the newer Xinerama multihead setups on
X11.
\section2 X11 specific enhancements
Qt 3.0 now complies with the NET WM Specification, recently adopted
by KDE 2.0. This allows easy integration and proper execution with
desktop environments that support the NET WM specification.
The font handling on X11 has undergone major changes. QFont no longer
has a one-to-one relation with window system fonts. QFont is now a
logical font that can load multiple window system fonts to simplify
Unicode text display. This completely removes the burden of
changing/setting fonts for a specific locale/language from the
programmer. For end-users, any font can be used in any locale. For
example, a user in Norway will be able to see Korean text without
having to set their locale to Korean.
Qt 3.0 also supports the new render extension recently added to
XFree86. This adds support for anti aliased text and pixmaps with
alpha channel (semi transparency) on the systems that support the
rendering extension (at the moment XFree 4.0.3 and later).
\section2 Printing
Printing support has been enhanced on all platforms. The QPrinter
class now supports setting a virtual resolution for the painting
process. This makes WYSIWYG printing trivial, and also allows you to
take full advantage of the high resolution of a printer when painting
on it.
The postscript driver built into TQt and used on Unix has been greatly
enhanced. It supports the embedding of true/open type and type1 fonts
into the document, and can correctly handle and display Unicode.
Support for fonts built into the printer has been enhanced and TQt now
knows about the most common printer fonts used for Asian languages.
\section2 QHttp
This class provides a simple interface for HTTP downloads and uploads.
\section2 Compatibility with the Standard Template Library (STL)
Support for the C++ Standard Template Library has been added to the
\link qt-template-lib.html TQt Template Library (QTL)\endlink. The QTL
classes now contain appropriate copy constructors and typedefs so that
they can be freely mixed with other STL containers and algorithms. In
addition, new member functions have been added to QTL template classes
which correspond to STL-style naming conventions (e.g., push_back()).
\section1 TQt Designer
\link designer-manual.book TQt Designer\endlink was a pure dialog
editor in TQt 2.2 but has now been extended to provide the full
functionality of a GUI design tool.
This includes the ability to lay out main windows with menus and
toolbars. Actions can be edited within TQt Designer and then plugged
into toolbars and menu bars via drag and drop. Splitters can now be
used in a way similar to layouts to group widgets horizontally or
vertically.
In TQt 2.2, many of the dialogs created by TQt Designer had to be
subclassed to implement functionality beyond the predefined signal and
slot connections. Whilst the subclassing approach is still fully supported,
Qt Designer now offers an alternative: a plugin for editing
slots. The editor offers features such as syntax highlighting,
completion, parentheses matching and incremental search.
The functionality of TQt Designer can now be extended via plugins.
Using TQt Designer's interface or by implementing one of the provided
interfaces in a plugin, a two way communication between plugin and Qt
Designer can be established. This functionality is used to implement
plugins for custom widgets, so that they can be used as real widgets
inside the designer.
Basic support for project management has been added. This allows you
to read and edit *.pro files, add and remove files to/from the project
and do some global operations on the project. You can now open the
project file and have one-click access to all the *.ui forms in the
project.
In addition to generating code via uic, TQt Designer now supports the
dynamic creation of widgets directly from XML user interface
description files (*.ui files) at runtime. This eliminates the need of
recompiling your application when the GUI changes, and could be used
to enable your customers to do their own customizations. Technically,
the feature is provided by a new class, QWidgetFactory in the
QResource library.
\section1 TQt Linguist
\link linguist-manual.book TQt Linguist\endlink is a GUI utility to
support translating the user-visible text in applications written with
Qt. It comes with two command-line tools: lupdate and lrelease.
Translation of a TQt application is a three-step process:
\list
\i Run lupdate to extract user-visible text from the C++ source
code of the TQt application, resulting in a translation source file
(a *.ts file).
\i Provide translations for the source texts in the *.ts file using
TQt Linguist.
\i Run lrelease to obtain a light-weight message file (a *.qm file)
from the *.ts file, which provides very fast lookup for released
applications.
\endlist
Qt Linguist is a tool suitable for use by translators. Each
user-visible (source) text is characterized by the text itself, a
context (usually the name of the C++ class containing the text), and
an optional comment to help the translator. The C++ class name will
usually be the name of the relevant dialog, and the comment will often
contain instructions that describe how to navigate to the relevant
dialog.
You can create phrase books for TQt Linguist to provide common
translations to help ensure consistency and to speed up the
translation process. Whenever a translator navigates to a new text to
translate, TQt Linguist uses an intelligent algorithm to provide a list
of possible translations: the list is composed of relevant text from
any open phrase books and also from identical or similar text that has
already been translated.
Once a translation is complete it can be marked as "done"; such
translations are included in the *.qm file. Text that has not been
"done" is included in the *.qm file in its original form. Although Qt
Linguist is a GUI application with dock windows and mouse control,
toolbars, etc., it has a full set of keyboard shortcuts to make
translation as fast and efficient as possible.
When the TQt application that you're developing evolves (e.g. from
version 1.0 to version 1.1), the utility lupdate merges the source
texts from the new version with the previous translation source file,
reusing existing translations. In some typical cases, lupdate may
suggest translations. These translations are marked as unfinished, so
you can easily find and check them.
\section1 TQt Assistant
Thanks to the positive feedback we received about the help system
built into \link designer-manual.book TQt Designer\endlink, we decided
to offer this part as a separate application called \link
assistant.book TQt Assistant\endlink. TQt Assistant can be used to
browse the TQt class documentation as well as the manuals for Qt
Designer and TQt Linguist. It offers index searching, a contents
overview, bookmarks history and incremental search. TQt Assistant is
used by both TQt Designer and TQt Linguist for browsing their help
documentation.
\section1 qmake
To ease portability we now provide the \link qmake-manual.book
qmake\endlink utility to replace tmake. QMake is a C++ version of
tmake which offers additional functionallity that is difficult to
reproduce in tmake. Trolltech uses qmake in its build system for Qt
and related products and we have released it as free software.
*/