/* This file is part of the KDE kmobile library. Copyright (C) 2003 Helge Deller This library is free software; you can redistribute it and/or modify it under the terms of the GNU Library General Public License version 2 as published by the Free Software Foundation. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more details. You should have received a copy of the GNU Library General Public License along with this library; see the file COPYING.LIB. If not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef LIB_KMOBILEDEVICE_H #define LIB_KMOBILEDEVICE_H #include #include #include #include #include #include #include #include #include #include class TDEConfig; #define KMOBILE_MIMETYPE_DEVICE "kdedevice/mobiledevice" #define KMOBILE_MIMETYPE_DEVICE_KONQUEROR(name) TQString("kdedevice/kmobile_%1").arg(name) #define KMOBILE_MIMETYPE_INODE "inode/" #define KMOBILE_ICON_UNKNOWN "mobile_unknown" /** * @short Represents the base class for dynamically loaded mobile device drivers. * * KMobileDevice is the base class for all hardware device drivers. * Every derived class has to add additional functionality. * * For a KMobileSomeDevice driver you have to write the following code: * 
 * K_EXPORT_COMPONENT_FACTORY( libkmobile_somedevice, KMobileSomeDevice() );
 * TQObject *KMobileSomeDevice::createObject( TQObject *parent, const char *name,
 *      const char *, const TQStringList &args )
 * {
 *    return new KMobileSomeDevice( parent, name, args );
 * }
 *
* * @see KLibFactory * @author Helge Deller */ class KDE_EXPORT KMobileDevice : public KLibFactory { Q_OBJECT friend class KMobileView; public: /** * Construct a new KMobileDevice. * * @param obj The parent object. This is usually 0. * @param name The object name. For session management and window management to work. * @param args Additional commandline parameters - the first entry has the config file name. */ KMobileDevice(TQObject *obj, const char *name, const TQStringList &args ); virtual ~KMobileDevice(); /** * Connect to the device. * * @param parent The parent widget. It will be used as parent for message boxes. */ virtual bool connectDevice( TQWidget *parent = 0 ) = 0; /** * Disconnect from the device. * * @param parent The parent widget. It will be used as parent for message boxes. */ virtual bool disconnectDevice( TQWidget *parent = 0 ) = 0; /** * Returns true, if the device is currently connected and the link is online. */ virtual bool connected(); /** * Returns the classname, to which the device belongs. Examples are e.g. * "Nokia mobile phone", "MP3 Player", "Handspring Organizer" */ virtual TQString deviceClassName() const; /** * Returns the real devices name, e.g. "Nokia 6310" or "Rio MP3 Player" */ virtual TQString deviceName() const; /** * Returns the hardware revision of the devices, e.g. "Revision 1.2" */ virtual TQString revision() const; /** * Returns an unique ID for the device, e.g. IMEI number on phones, or serial number. * The returned String is used to have a unique identification for syncronisation. */ virtual TQString deviceUniqueID() = 0; /** * Returns true, if the device is connected via a slow connection. * Good examples for slow connections are serial or infrared ports. */ virtual bool isSlowDevice() const; /** * Returns true, if this is a read-only device. */ virtual bool isReadOnly() const; /** * Pop-up a device-specific configuration dialog. * * @param parent The parent widget. It will be used as parent for the configuration dialog. */ virtual bool configDialog(TQWidget *parent); // The ClassType may be used e.g. to select an suitable icon enum ClassType { Unclassified = 0, Phone = 1, Organizer = 2, Camera = 3, MusicPlayer = 4, // e.g. MP3Players, CDPlayers LastClassType = MusicPlayer }; enum ClassType classType() const; // you may provide your own icon() implementation to display // an appropriate Pixmap (e.g. a Palm Pilot or a Zaurus image). virtual TQString iconFileName() const; // the default Icon set static TQString defaultIconFileName( ClassType ct = Unclassified ); static TQString defaultClassName( ClassType ct = Unclassified ); // The capabilities of this device (bitmapped value) enum Capabilities { hasNothing = 0, // not supported hasAddressBook = 1, // mobile phones, organizers, ... hasCalendar = 2, // organizers, mobile phones, ... hasNotes = 4, // organizers, mobile phones, ... hasFileStorage = 8, // organizers, handhelds, mp3-player, ... hasAnyCapability = 0xffff // used to select devices independent of the capatibilities }; int capabilities() const; const TQString nameForCap(int cap) const; // returns an error string for the given error code // See TDEIO::buildErrorString() TQString buildErrorString(TDEIO::Error err, const TQString &errorText) const; public: /* * Addressbook / Phonebook support */ virtual int numAddresses(); virtual int readAddress( int index, KABC::Addressee &adr ); virtual int storeAddress( int index, const KABC::Addressee &adr, bool append = false ); /* * Calendar support */ virtual int numCalendarEntries(); virtual int readCalendarEntry( int index, KCal::Event &entry ); virtual int storeCalendarEntry( int index, const KCal::Event &entry ); /* * Notes support */ virtual int numNotes(); virtual int readNote( int index, TQString ¬e ); virtual int storeNote( int index, const TQString ¬e ); /* ********************** * FILE STORAGE SUPPORT ********************** * mostly compatible to the kioslave base class */ /** * helper functions for the kmobile device drivers */ void createDirEntry(TDEIO::UDSEntry& entry, const TQString& name, const TQString& url, const TQString& mime) const; void createFileEntry(TDEIO::UDSEntry& entry, const TQString& name, const TQString& url, const TQString& mime, const unsigned long size = 0) const; /** * Lists the contents of @p path. * The slave should emit ERR_CANNOT_ENTER_DIRECTORY if it doesn't exist, * if we don't have enough permissions, or if it is a file * It should also emit @ref #totalFiles as soon as it knows how many * files it will list. */ virtual void listDir( const TQString &url ); /** * Create a directory * @param path path to the directory to create * @param permissions the permissions to set after creating the directory * (-1 if no permissions to be set) * The slave emits ERR_COULD_NOT_MKDIR if failure. */ virtual void mkdir( const TQString &url, int permissions ); /** * Rename @p oldname into @p newname. * If the slave returns an error ERR_UNSUPPORTED_ACTION, the job will * ask for copy + del instead. * @param src where to move the file from * @param dest where to move the file to * @param overwrite if true, any existing file will be overwritten */ virtual void rename( const TQString &src, const TQString &dest, bool overwrite ); /** * Creates a symbolic link named @p dest, pointing to @p target, which * may be a relative or an absolute path. * @param target The string that will become the "target" of the link (can be relative) * @param dest The symlink to create. * @param overwrite whether to automatically overwrite if the dest exists */ virtual void symlink( const TQString &target, const TQString &dest, bool overwrite ); /** * Delete a file or directory. * @param path file/directory to delete * @param isfile if true, a file should be deleted. * if false, a directory should be deleted. */ virtual void del( const TQString &url, bool isfile); /** * Finds all details for one file or directory. * The information returned is the same as what @ref #listDir returns, * but only for one file or directory. */ virtual void stat( const TQString &url ); /** * Change permissions on @p path * The slave emits ERR_DOES_NOT_EXIST or ERR_CANNOT_CHMOD */ virtual void chmod( const TQString &url, int permissions ); /** * get, aka read. * @param url the full url for this request. Host, port and user of the URL * can be assumed to be the same as in the last setHost() call. * The slave emits the data through @ref #data */ virtual void get( const TQString &url ); /** * put, aka write. * @param path where to write the file (decoded) * @param permissions may be -1. In this case no special permission mode is set. * @param overwrite if true, any existing file will be overwritten. * If the file indeed already exists, the slave should NOT apply the * permissions change to it. * @param resume */ virtual void put( const TQString &url, int permissions, bool overwrite, bool resume ); /** * Finds mimetype for one file or directory. * * This method should either emit 'mimeType' or it * should send a block of data big enough to be able * to determine the mimetype. * * If the slave doesn't reimplement it, a @ref #get will * be issued, i.e. the whole file will be downloaded before * determining the mimetype on it - this is obviously not a * good thing in most cases. */ virtual void mimetype( const TQString &url ); /** * Used for any command that is specific to this slave (protocol) * Examples are : HTTP POST, mount and unmount (kio_file) * * @param data packed data; the meaning is completely dependent on the * slave, but usually starts with an int for the command number. * Document your slave's commands, at least in its header file. */ virtual void special( const TQByteArray & ); signals: /** * Call this from stat() to express details about an object, the * UDSEntry customarily contains the atoms describing file name, size, * mimetype, etc. * @param _entry The UDSEntry containing all of the object attributes. */ void statEntry( const TDEIO::UDSEntry &_entry ); /** * internal function to be called by the slave. * It collects entries and emits them via listEntries * when enough of them are there or a certain time * frame exceeded (to make sure the app gets some * items in time but not too many items one by one * as this will cause a drastic performance penalty) * @param ready set to true after emitting all items. _entry is not * used in this case */ void listEntry( const TDEIO::UDSEntry& _entry, bool ready); /** * Internal function to transmit meta data to the application. */ void sendMetaData(); /** * Prompt the user for Authorization info (login & password). * * Use this function to request authorization information from * the end user. You can also pass an error message which explains * why a previous authorization attempt failed. Here is a very * simple example: * * 
     * TDEIO::AuthInfo authInfo;
     * if ( openPassDlg( authInfo ) )
     * {
     *    kdDebug() << TQString::fromLatin1("User: ")
     *              << authInfo.username << endl;
     *    kdDebug() << TQString::fromLatin1("Password: ")
     *              << TQString::fromLatin1("Not displayed here!") << endl;
     * }
     *
* * You can also preset some values like the username, caption or * comment as follows: * * 
     * TDEIO::AuthInfo authInfo;
     * authInfo.caption= "Acme Password Dialog";
     * authInfo.username= "Wile E. Coyote";
     * TQString errorMsg = "You entered an incorrect password.";
     * if ( openPassDlg( authInfo, errorMsg ) )
     * {
     *    kdDebug() << TQString::fromLatin1("User: ")
     *              << authInfo.username << endl;
     *    kdDebug() << TQString::fromLatin1("Password: ")
     *              << TQString::fromLatin1("Not displayed here!") << endl;
     * }
     *
* * NOTE: A call to this function can fail and return @p false, * if the UIServer could not be started for whatever reason. * * @param info See @ref AuthInfo. * @param errorMsg Error message to show * @return @p TRUE if user clicks on "OK", @p FALSE otherwsie. * @since 3.1 */ bool openPassDlg( TDEIO::AuthInfo& info, const TQString &errorMsg ); /** * Call this in @ref #mimetype, when you know the mimetype. * See @ref #mimetype about other ways to implement it. */ void mimeType( const TQString &_type ); /** * Call to signal an error. * This also finishes the job, no need to call finished. * * If the Error code is TDEIO::ERR_SLAVE_DEFINED then the * _text should contain the complete translated text of * of the error message. This message will be displayed * in an KTextBrowser which allows rich text complete * with hyper links. Email links will call the default * mailer, "exec:/command arg1 arg2" will be forked and * all other links will call the default browser. * * @see TDEIO::Error * @see KTextBrowser * @param _errid the error code from TDEIO::Error * @param _text the rich text error message */ void error( int _errid, const TQString &_text ); /** * Call to signal a warning, to be displayed in a dialog box. */ void warning( const TQString &msg ); /** * Call to signal a message, to be displayed if the application wants to, * for instance in a status bar. Usual examples are "connecting to host xyz", etc. */ void infoMessage( const TQString &msg ); /** * Call to signal successful completion of any command * (besides openConnection and closeConnection) */ void finished(); #ifndef Q_MOC_RUN enum MessageBoxType { QuestionYesNo = 1, WarningYesNo = 2, WarningContinueCancel = 3, WarningYesNoCancel = 4, Information = 5, SSLMessageBox = 6 }; #endif // Q_MOC_RUN /** * Call this to show a message box from the slave (it will in fact be handled * by kio_uiserver, so that the progress info dialog for the slave is hidden * while this message box is shown) * @param type type of message box: QuestionYesNo, WarningYesNo, WarningContinueCancel... * @param text Message string. May contain newlines. * @param caption Message box title. * @param buttonYes The text for the first button. * The default is i18n("&Yes"). * @param buttonNo The text for the second button. * The default is i18n("&No"). * Note: for ContinueCancel, buttonYes is the continue button and buttonNo is unused. * and for Information, none is used. * @return a button code, as defined in KMessageBox, or 0 on communication error. */ int messageBox( MessageBoxType type, const TQString &text, const TQString &caption = TQString(), const TQString &buttonYes = TQString(), const TQString &buttonNo = TQString() ); /** * Call this in @ref #get and @ref #copy, to give the total size * of the file * Call in @ref listDir too, when you know the total number of items. */ void totalSize( TDEIO::filesize_t _bytes ); /** * Call this during @ref #get and @ref #copy, once in a while, * to give some info about the current state. * Don't emit it in @ref #listDir, @ref #listEntries speaks for itself. */ void processedSize( TDEIO::filesize_t _bytes ); signals: void connectionChanged( bool conn_established ); protected: // only available to sub-classed device drivers: void setClassType( enum ClassType ct ); void setCapabilities( int caps ); TDEConfig *config() const { return m_config; }; TQString configFileName() const { return m_configFileName; }; /** * Lock/Unlock serial ports and other devices * @param device Name of a device port (e.g. /dev/ttyS1, ttyS1, /dev/ircomm0) * Returns true, if device could be locked or unlocked */ bool lockDevice(const TQString &device, TQString &err_reason); bool unlockDevice(const TQString &device); protected: TQMutex m_mutex; // mutex to syncronize DCOP accesses to this device TQString m_configFileName; TDEConfig *m_config; // this is where this device should store it's configuration enum ClassType m_classType; TQString m_deviceClassName; // e.g. "Nokia mobile phone", "MP3 Player", "Handspring Organizer" TQString m_deviceName; // e.g. "Nokia 6310", "Opie" TQString m_deviceRevision; // e.g. "Revision 1.2" or "n/a" TQString m_connectionName; // e.g. "IRDA", "USB", "Cable", "gnokii", "gammu", ... int m_caps; // see enum Capabilities bool m_connected; private: class KMobileDevicePrivate *d; }; #endif /* LIB_KMOBILEDEVICE_H */