You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdenetwork/kppp/README.ModemDB

78 lines
2.3 KiB

Modem Database
==============
The Modem Database (MD) will further simplify kppp by allowing the user to
select a modem from a database. The MD will be organized by the name of the
manufacturer. Each modem will only have those entries not common to the
generic Hayes Modem command set. The following entries will be available
(defaults in brackets):
[Group]: Can be freely chosen, may not be "Common"
Vendor: The modem vendor
Name: The name of the modem, without vendor. Needed
Parent: All settings of this modem are inherited. Parent works
recursive, so if the parent has another parent, this will
be inherited too and so on.
Reset: This should reset the modem (ATZ)
Init: The init string (AT V1 E1)
Volume0: Volume off (ATL0)
Volume1: Medium volume (ATL1)
Volume2: Loud volume (ATL3)
PreInitDelay: Delay after opening the modem, before sending the Init
command (50)
PostInitDelay: Delay after sending the Init command (30)
InitResponse: Modem response to the Init command (OK)
BlindDialOn: To dial without waiting for line carrier (ATX3)
BlindDialOff: Don<6F>t dial without waiting for line carrier (ATX4)
ToneDial: The command to dial out, number is appended (ATDT)
PulseDial: The command to use impulse dialing (ATDP)
ConnectResponse:The modems answer to "Dial" when connection is established
BusyResponse: Response to a busy line (BUSY)
NoCarrierResponse: Response when carrier was not establ. (NO CARRIER)
NoDialTone: Response when no dial tone was found (NO DIALTONE)
SupportsCD: Modem supports the "Modem asserts CD line" feature (1==yes)
AutoAnswerOn: Turn on auto answer (for callback) (ATS0=1)
AutoAnswerOff: Turn off auto answer ATS0=0
If the name begins with "!", this is NOT shown in the modem list but can be
taken as parent. Every modem initially inherits from "Common".
Example:
========
[Common]
Vendor=Generic
Name=Hayes Compatible
Reset=Z
Init=ATV1
Volume0=M0L0
Volume1=M1L1
Volume2=M1L3
PreInitDelay=50
PostInitDelay=30
InitResponse=OK
BlindDialOn=X3
BlindDialOff=X4
ToneDial=DT
PulseDial=DP
ConnectResponse=CONNECT
BusyResponse=BUSY
NoCarrierResponese=NO CARRIER
NoDialTone=NO DIALTONE
SupportsCD=true
[!Zyxel Omni TA128]
Vendor=Zyxel
Name=Omni TA 128
Reset=&F
[Zyxel Omni TA128/X75]
Parent=Zyxel Omni TA128
Name=Zyxel Omni TA128/X75
Init=B20 V1 E1
[Zyxel Omni TA128/sync.PPP]
Parent=!Zyxel Omni TA128
Name=Zyxel Omni TA128/sync.PPP
Init=B40 V1 E1