You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tdemultimedia/kscd/libwm/include/wm_config.h

392 lines
14 KiB

#ifndef WM_CONFIG_H
#define WM_CONFIG_H
/*
* $Id$
*
* This file is part of WorkMan, the civilized CD player library
* (c) 1991-1997 by Steven Grimm (original author)
* (c) by Dirk Försterling (current 'author' = maintainer)
* The maintainer can be contacted by his e-mail address:
* milliByte@DeathsDoor.com
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
**********************************************************************
*
* This file consists of several parts. First, there's a generic,
* platform independent part. Set needed options there.
* The following parts are platform dependent. You may search for the
* names listed below and then set your OS specific options there.
* Don't be surprised, if there are no options for your OS. They aren't
* needed in any case.
*
* The default values should produce a functional WorkMan on every
* platform.
*
*********************
* Current platforms:
*********************
* BSD386
* FreeBSD
* HP-UX
* Irix (SGI)
* Linux
* News (Sony NewsOS)
* OpenBSD
* OSF1
* Sun (SunOS/Solaris, Sparc or x86)
* SVR4
* Ultrix
* AIX
*
* The above order corresponds with the order of the platform specific
* options below.
*/
#include <config.h>
/******************************************************************
* generic options
******************************************************************
** ** *** **** ** **** ** * ** ** ** * **
* * * *** **** * * *** * ** ** *** * * * * * * **
* * *** **** ** *** ** ** ** * * ** * * **
* * * *** **** **** *** * ** ** *** * * * * *** **
* * * * ** **** * * ** ** **** ** * * *** **
******************************************************************/
/*
* This option is obvious. But please do not forget the original
* WorkMan version string if you need support.
*/
#define WORKMAN_NAME "LibWorkMan"
#define WORKMAN_VERSION "1.4.0"
/*
* If your CD-ROM drive closes its tray if the device is opened, then
* the next define can make WorkMans "Eject" button an "open/close"
* button. If it disturbs you, just comment it out.
*
* ### this is preliminary. It may have no effect for you ###
*/
#define CAN_CLOSE 1
/*
* Define the following if you want the balance slider to
* decrease one channel's volume while increasing the other's
*/
/* #define SYMETRIC_BALANCE 1 */
/*
* Define this if you want CDDA support. Supported systems are:
*
* - Solaris (2.4 or newer)
* --> Linux is on the way. Don't define it now. It would lead to errors only.
*/
/*#define BUILD_CDDA 1*/
/******************************************************************
* BSD386
******************************************************************
*** **** *** ******* ** **** **** ************
*** ** ** ****** * ***** ****** ** ** ** ***************
*** ****** **** ** *** ***** ***** *** ************
*** ** ****** ** * *** ******** ** ** ** ** ***********
*** **** *** *** ****** **** **** ************
******************************************************************/
#if defined(__bsdi__) || defined(__bsdi)
/*
* This lets you use the SoundBlaster Mixer on BSD/386
*/
#define SOUNDBLASTER 1
#define DEFAULT_CD_DEVICE "/dev/rsr2c"
#endif /* __bsdi__ (BSD/386) */
/******************************************************************
* FreeBSD
******************************************************************
*** ** *** ** ** **** *** ***********
*** ****** ** ** ****** ****** ** ** ****** * **********
*** **** *** **** **** ****** **** ** *********
*** ****** ** ** ****** ****** ** ****** ** * **********
*** ****** ** ** ** ** **** *** ***********
******************************************************************/
#if defined(__FreeBSD__) || defined(__FreeBSD)
#if __FreeBSD_version >= 500100
#define DEFAULT_CD_DEVICE "/dev/acd0"
#else
#define DEFAULT_CD_DEVICE "/dev/acd0c"
#endif
#endif /* freebsd */
/* DragonFly */
#if defined(__DragonFly__)
#define DEFAULT_CD_DEVICE "/dev/acd0c"
#endif
/******************************************************************
* NetBSD
******************************************************************
*** *** ** ** ** **** *** *****************
*** ** ** ******** **** ** ** ****** * ****************
*** * * ** ****** **** ****** **** ** ***************
*** ** ** ******** **** ** ****** ** * ****************
*** *** ** **** **** **** *** *****************
******************************************************************/
#if defined(__NetBSD__) || defined(__NetBSD)
#if defined(__i386__)
#define DEFAULT_CD_DEVICE "/dev/rcd0d"
#else
#define DEFAULT_CD_DEVICE "/dev/rcd0c"
#endif
#endif /* netbsd */
/******************************************************************
* HP-UX
******************************************************************
*** ** ** ********* ** ** ** ***************************
*** ** ** ** ******** ** *** ****************************
*** ** *** ** ** **** *****************************
*** ** ** ************ ** *** ****************************
*** ** ** ************* *** ** ***************************
******************************************************************/
#if defined(hpux) || defined (__hpux)
#define DEFAULT_CD_DEVICE "/dev/rscsi"
#endif /* hpux */
/******************************************************************
* OpenBSD
******************************************************************
**** **** *** ** *** ** **** *** ********
*** ** *** ** ** ****** ** ** ** ** ****** * *******
*** ** *** *** **** * * ** ****** **** ** ******
*** ** *** ****** ****** ** ** ** ****** ** * *******
**** **** ****** ** *** ** **** *** ********
******************************************************************/
#if defined(__OpenBSD__)
#define DEFAULT_CD_DEVICE "/dev/rcd0c"
#endif /* OpenBSD */
/******************************************************************
* Irix
******************************************************************
*** ** *** ** ** *********************************
***** **** ** **** ***** **********************************
***** **** ***** ****** ***********************************
***** **** ** **** ***** **********************************
*** ** ** ** ** ** *********************************
******************************************************************/
#if defined(sgi) || defined(__sgi)
#define DEFAULT_CD_DEVICE "/dev/scsi/sc0d6l0"
#endif /* sgi IRIX */
/******************************************************************
* Linux
******************************************************************
*** ****** ** *** ** ** ** ** ***********************
*** ******** **** ** ** ** *** ************************
*** ******** **** * * ** ** **** *************************
*** ******** **** ** ** ** *** ************************
*** ** ** *** *** *** ** ***********************
******************************************************************/
#if defined(__linux__)
/*
* Uncomment the following line to have WorkMan send SCSI commands
* directly to the CD-ROM drive. If you have a SCSI drive you
* probably want this, but it will cause WorkMan to not work on IDE
* drives.
*/
/*#define LINUX_SCSI_PASSTHROUGH 1*/
/*
* Which device should be opened by WorkMan at default?
*/
#define DEFAULT_CD_DEVICE "/dev/cdrom"
/*
* Uncomment the following if you use the sbpcd or mcdx device driver.
* It shouldn't hurt if you use it on other devices. It'll be nice to
* hear from non-sbpcd (or mcdx) users if this is right.
*/
/*#define SBPCD_HACK 1*/
/*
* Linux Soundcard support
* Disabled by default, because some people rely on it
*/
/* #define OSS_SUPPORT 1 */
/*
* This has nothing to do with the above.
*/
/* #define CURVED_VOLUME */
/*
* Uncomment the following if you want to try out a better responding
* WorkMan, especially with IDE drives. This may work with non-IDE
* drives as well. But it may be possible, that it doesn't work at all.
* If your drive/driver combination cannot handle the faster access,
* the driver will usually hang and you have to reboot your machine.
*/
/* #define FAST_IDE 1 */
/*
* There are two alternative ways of checking a device containing a
* mounted filesystem. Define BSD_MOUNTTEST for the test using
* getmntent(). Undefine it for using the fstatfs().
* I built in the choice, because it's not clear which method should
* be used in Linux.
*/
#define BSD_MOUNTTEST
#endif /* __linux */
/******************************************************************
* Sony NewsOS
******************************************************************
*** *** ** ** ***** *** *****************************
*** ** ** ****** ***** ** ********************************
*** * * ** **** ** ** **** ******************************
*** ** ** ****** * * ****** ****************************
*** *** ** ** * *** *****************************
******************************************************************/
#if defined(__sony_news) || defined(sony_news)
#define DEFAULT_CD_DEVICE "/dev/rsd/b0i6u0p2\0"
#endif
/******************************************************************
* OSF1
******************************************************************
**** **** *** *** *** *******************************
*** ** ** ****** ****** ** *******************************
*** ** **** **** *** ***** *******************************
*** ** ****** ** **** ****** *******************************
**** **** *** *** ***** *****************************
******************************************************************/
#if defined(__osf__) || defined(__osf)
/* not needed here, it's figured out by plat_osf1.c */
/* #define DEFAULT_CD_DEVICE "/dev/rcdrom/cd0" */
#endif
/******************************************************************
* SunOS/Solaris
******************************************************************
**** *** ** ** *** ***************************************
*** ****** ** ** ** ***************************************
***** **** ** ** * * ***************************************
******* ** ** ** ** ***************************************
**** **** *** *** ***************************************
******************************************************************/
#if defined(sun) || defined(__sun)
/*
* Define the following for Solaris 2.x
* If you don't want WorkMan to try to activate the SPARCstation 5
* internal audio input so you get sound from the workstation, comment
* out the CODEC define.
*/
#define SYSV 1
#define CODEC 1
#define DEFAULT_CD_DEVICE "/vol/dev/aliases/cdrom0"
/*
* set the following to "SUNW,CS4231" for Sun and to "SUNW,sb16"
* for PC (with SoundBlaster 16) running Solaris x86
* (only important if you define CODEC above)
*/
#define SUN_AUD_DEV "SUNW,CS4231"
/*#define SUN_AUD_DEV "SUNW,sbpro"*/
#endif
/******************************************************************
* SVR4
******************************************************************
**** *** **** ** *** * ********************************
*** ****** **** ** ** ** * ********************************
***** ***** ** *** *** *******************************
******* *** ** *** ** ***** ********************************
**** ***** **** ** ***** ********************************
******************************************************************/
#if (defined(SVR4) || defined(__SVR4)) && !defined(sun) && !defined(__sun) && !defined(sony_news) && !defined(__sony_news)
#define DEFAULT_CD_DEVICE "/dev/rcdrom/cd0"
#endif
/******************************************************************
* Ultrix
******************************************************************
*** ** ** ***** ** *** ** ** ******************
*** ** ** ******* **** ** **** ***** *******************
*** ** ** ******* **** ***** ****** ********************
*** ** ** ******* **** ** **** ***** *******************
**** *** *** **** ** ** ** ** ******************
******************************************************************/
#if defined(ultrix) || defined(__ultrix)
#endif
/******************************************************************
* IBM AIX
******************************************************************
**** *** ** ** *****************************************
*** ** **** ***** ******************************************
*** **** ****** *******************************************
*** ** **** ***** ******************************************
*** ** ** ** ** *****************************************
******************************************************************/
#if defined(AIXV3) || defined(__AIXV3)
#define DEFAULT_CD_DEVICE "/dev/cd0"
#endif /* IBM AIX */
/******************************************************************/
#endif /* WM_CONFIG_H */