/* * Copyright (C) 2003 Thiago Macieira * * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #ifndef KSERVERSOCKET_H #define KSERVERSOCKET_H #include #include "tdesocketbase.h" namespace KNetwork { class TDESocketDevice; class KStreamSocket; class KResolver; class KResolverResults; class TDEServerSocketPrivate; /** * @class TDEServerSocket kserversocket.h kserversocket.h * @brief A server socket for accepting connections. * * This class provides functionality for creating a socket to * listen for incoming connections and subsequently accept them. * * To use this class, you must first set the parameters for the listening * socket's address, then place it in listening mode. * * A typical example would look like: * \code * TQString service = "http"; * TDEServerSocket *ss = new TDEServerSocket(service); * connect(ss, TQT_SIGNAL(readyAccept()), this, TQT_SLOT(slotReadyAccept())); * connect(ss, TQT_SIGNAL(gotError(int)), this, TQT_SLOT(slotSocketError(int))); * ss->listen(); * \endcode * * In this case, this class will place the socket into listening mode on the * service pointed to by @p service and will emit the @ref readyAccept signal * when a connection is ready for accepting. The called slot is responsible for * calling @ref accept. * * The location of the services file (where @p service is looked up) * is defined by _PATH_SERVICES in /usr/include/netdb.h. This is * usually set to /etc/services. * See RFC 1700 for more information on services. * You can specify @p service as a port number directly, rather than as a service * name. This is discouraged as it prevents the end user from easily modifying * the port number. * * For another example of usage, this below code attempts to make a connection on any port within a range: * \code * TDEServerSocket *ss = new TDEServerSocket(); * ss->setFamily(KResolver::InetFamily); * bool found = false; * for( unsigned int port = firstport; port <= lastport; ++port) { * ss->setAddress( TQString::number( port ) ); * bool success = ss->listen(); * if( found = ( success && ss->error() == * TDESocketBase::NoError ) ) * break; * ss->close(); * } * if( !found ) { * // Couldn't connect to any port. * } else { * connect(ss, TQT_SIGNAL(readyAccept()), this, TQT_SLOT(slotReadyAccept())); * connect(ss, TQT_SIGNAL(gotError(int)), this, TQT_SLOT(slotSocketError(int))); * ss->listen(); * } * \endcode * * The called slot slotReadyAccept() is responsible for calling * @ref accept. * * It is important to note that @ref accept can return either an * object of type KNetwork::KStreamSocket or * KNetwork::TDEBufferedSocket (default). If you want to accept a * non-buffered socket, you must first call setAcceptBuffered. * * @warning If you use TDEServerSocket in an auxiliary (non-GUI) thread, * you need to accept only KNetwork::KStreamSocket objects. * * @see KNetwork::KStreamSocket, KNetwork::TDEBufferedSocket * @author Thiago Macieira */ class TDECORE_EXPORT TDEServerSocket: public TQObject, public KPassiveSocketBase { Q_OBJECT public: /** * Default constructor. * * If the binding address isn't changed by setAddress, this socket will * bind to all interfaces on this node and the port will be selected by the * operating system. * * @param parent the parent TQObject object * @param name the name of this object */ TDEServerSocket(TQObject* parent = 0L, const char *name = 0L); /** * Construct this object specifying the service to listen on. * * If the binding address isn't changed by setAddress, this socket will * bind to all interfaces and will listen on the port specified by * @p service. This is either a service name (e.g. 'www') or a port * number (e.g. '80'). * * The location of the services file (where @p service is looked up) * is defined by _PATH_SERVICES in /usr/include/netdb.h. This is * usually set to /etc/services. * See RFC 1700 for more information on services. * * @param service the service name to listen on * @param parent the parent TQObject object * @param name the name of this object */ TDEServerSocket(const TQString& service, TQObject* parent = 0L, const char *name = 0L); /** * Construct this object specifying the node and service names to listen on. * * If the binding address isn't changed by setAddress, this socket will * bind to the interface specified by @p node and the port specified by * @p service. This is either a service name (e.g. 'www') or a port * number (e.g. '80'). * * The location of the services file (where @p service is looked up) * is defined by _PATH_SERVICES in /usr/include/netdb.h. This is * usually set to /etc/services. * See RFC 1700 for more information on services. * * @param node the node to bind to * @param service the service port to listen on * @param parent the parent TQObject object * @param name the name of this object */ TDEServerSocket(const TQString& node, const TQString& service, TQObject* parent = 0L, const char *name = 0L); /** * Destructor. This will close the socket, if open. * * Note, however, that accepted sockets do not get closed when this * object closes. */ ~TDEServerSocket(); protected: /** * Sets the socket options. Reimplemented from TDESocketBase. */ virtual bool setSocketOptions(int opts); public: /** * Returns the internal KResolver object used for * looking up the host name and service. * * This can be used to set extra options to the * lookup process other than the default values, as well * as obtaining the error codes in case of lookup failure. */ KResolver& resolver() const; /** * Returns the internal list of resolved results for the binding address. */ const KResolverResults& resolverResults() const; /** * Enables or disables name resolution. If this flag is set to true, * the @ref bind operation will trigger name lookup * operations (i.e., converting a hostname into its binary form). * If the flag is set to false, those operations will instead * try to convert a string representation of an address without * attempting name resolution. * * This is useful, for instance, when IP addresses are in * their string representation (such as "1.2.3.4") or come * from other sources like @ref TDESocketAddress. * * @param enable whether to enable */ void setResolutionEnabled(bool enable); /** * Sets the allowed families for the resolutions. * * @param families the families that we want/accept * @see KResolver::SocketFamilies for possible values */ void setFamily(int families); /** * Sets the address on which we will listen. The port to listen on is given by * @p service, and we will bind to all interfaces. To let the operating system choose a * port, set the service to "0". @p service can either be a service name * (e.g. 'www') or a port number (e.g. '80'). * * The location of the services file (where @p service is looked up) * is defined by _PATH_SERVICES in /usr/include/netdb.h. This is * usually set to /etc/services. * See RFC 1700 for more information on services. * * @param service the service name to listen on */ void setAddress(const TQString& service); /** * @overload * Sets the address on which we will listen. This will cause the socket to listen * only on the interface given by @p node and on the port given by @p service. * @p service can either be a service name (e.g. 'www') or a port number * (e.g. '80'). * * The location of the services file (where @p service is looked up) * is defined by _PATH_SERVICES in /usr/include/netdb.h. This is * usually set to /etc/services. * See RFC 1700 for more information on services. * * @param node the node to bind to * @param service the service port to listen on */ void setAddress(const TQString& node, const TQString& service); /** * Sets the timeout for accepting. When you call @ref accept, * it will wait at most @p msecs milliseconds or return with an error * (returning a NULL object). * * @param msecs the time in milliseconds to wait, 0 to wait forever */ void setTimeout(int msecs); /** * Starts the lookup for peer and local hostnames as * well as their services. * * If the blocking mode for this object is on, this function will * wait for the lookup results to be available (by calling the * @ref KResolver::wait method on the resolver objects). * * When the lookup is done, the signal @ref hostFound will be * emitted (only once, even if we're doing a double lookup). * If the lookup failed (for any of the two lookups) the * @ref gotError signal will be emitted with the appropriate * error condition (see @ref TDESocketBase::SocketError). * * This function returns true on success and false on error. Note that * this is not the lookup result! */ virtual bool lookup(); /** * Binds this socket to the given nodename and service, * or use the default ones if none are given. * * Upon successful binding, the @ref bound signal will be * emitted. If an error is found, the @ref gotError * signal will be emitted. * * This function returns true on success. * * @param node the nodename * @param service the service */ virtual bool bind(const TQString& node, const TQString& service); /** * Binds the socket to the given service name. * @overload * * @param service the service */ virtual bool bind(const TQString& service); /** * Binds the socket to the addresses previously set with @ref setAddress. * @overload * */ virtual bool bind(); /** * Connect this socket to this specific address. Reimplemented from TDESocketBase. * * Unlike @ref bind(const TQString&, const TQString&) above, this function * really does bind the socket. No lookup is performed. The @ref bound signal * will be emitted. */ virtual bool bind(const KResolverEntry& address); /** * Puts this socket into listening mode. Reimplemented from @ref KPassiveSocketBase. * * Placing a socket into listening mode means it will be able to receive incoming * connections through the @ref accept method. * * If you do not call this method but call @ref accept directly, the socket will * be placed into listening mode automatically. * * @param backlog the number of connection the system is to * queue without @ref accept being called * @returns true if the socket is now in listening mode. */ virtual bool listen(int backlog = 5); // 5 is arbitrary /** * Closes this socket. */ virtual void close(); /** * Toggles whether the accepted socket will be buffered or not. * That is, the @ref accept function will always return a KStreamSocket * object or descended from it. If buffering is enabled, the class * to be returned will be TDEBufferedSocket. * * By default, this flag is set to true. * * @param enable whether to set the accepted socket to * buffered mode */ void setAcceptBuffered(bool enable); /** * Accepts one incoming connection and return the associated, open * socket. * * If this function cannot accept a new connection, it will return NULL. * The specific object class returned by this function may vary according * to the implementation: derived classes may return specialised objects * descended from KStreamSocket. * * @note This function should return a KStreamSocket object, but compiler * deficiencies prevent such an adjustment. Therefore, we return * the base class for active sockets, but it is guaranteed * that the object will be a KStreamSocket or derived from it. * * @sa TDEBufferedSocket * @sa setAcceptBuffered */ virtual KActiveSocketBase* accept(); /** * Returns this socket's local address. */ virtual TDESocketAddress localAddress() const; /** * Returns this socket's externally-visible address if know. */ virtual TDESocketAddress externalAddress() const; private slots: void lookupFinishedSlot(); signals: /** * This signal is emitted when this object finds an error. * The @p code parameter contains the error code that can * also be found by calling @ref error. */ void gotError(int code); /** * This signal is emitted when the lookup is successfully completed. */ void hostFound(); /** * This signal is emitted when the socket successfully binds * to an address. * * @param local the local address we bound to */ void bound(const KResolverEntry& local); /** * This signal is emitted when the socket completes the * closing/shut down process. */ void closed(); /** * This signal is emitted whenever the socket is ready for * accepting -- i.e., there is at least one connection waiting to * be accepted. */ void readyAccept(); protected: /** * Convenience function to set this object's error code to match * that of the socket device. */ void copyError(); private: bool doBind(); bool doListen(); private: TDEServerSocket(const TDEServerSocket&); TDEServerSocket& operator=(const TDEServerSocket&); TDEServerSocketPrivate *d; }; } // namespace KNetwork #endif