diff --git a/po/CMakeLists.txt b/po/CMakeLists.txt deleted file mode 100644 index 7d2e422..0000000 --- a/po/CMakeLists.txt +++ /dev/null @@ -1,17 +0,0 @@ -################################################# -# -# (C) 2011 Timothy Pearson -# kb9vqf (AT) pearsoncomputing.net -# -# Improvements and feedback are welcome -# -# This file is released under GPL >= 2 -# -################################################# - -file( GLOB_RECURSE po_files RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} tdeio-locate.po ) - -foreach( _po ${po_files} ) - get_filename_component( _lang ${_po} PATH ) - tde_create_translation( FILES ${_po} LANG ${_lang} ) -endforeach( ) diff --git a/po/de/tdeio-locate.po b/po/de/tdeio-locate.po deleted file mode 100644 index aec623d..0000000 --- a/po/de/tdeio-locate.po +++ /dev/null @@ -1,410 +0,0 @@ -# tdeio-locate: KDE I/O Slave for the locate command -# -# Copyright (C) 2004 by Armin Straub -# linux@arminstraub.de -# -# This file is distributed under the same license as tdeio-locate. -msgid "" -msgstr "" -"Project-Id-Version: tdeio-locate\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2021-07-07 18:33+0000\n" -"PO-Revision-Date: 2019-12-23 23:40+0000\n" -"Last-Translator: Chris \n" -"Language-Team: German \n" -"Language: de\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 3.9.1\n" - -#. Instead of a literal translation, add your name to the end of the list (separated by a comma). -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Chris (TDE)" - -#. Instead of a literal translation, add your email to the end of the list (separated by a comma). -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "(Keine Email)" - -#: tdeio_locate.cpp:351 -msgid "" -"

\"%1\" could not be started.

Please note that tdeio-locate can't " -"be used on its own. You need an additional program for doing searches. " -"Typically this is the command line tool locate that can be found in " -"many distributions by default. You can check if the correct tool is used by " -"looking at the setting \"Locate Binary\"." -"

Besides the mentioned tool locate, tdeio-locate can use any tool " -"that uses the same syntax. In particular, it was reported to work with " -"slocate and rlocate." -msgstr "" -"

\"%1\" konnte nicht gestartet werden.

Beachten Sie, dass tdeio-" -"locate nicht alleine verwendet werden kann. Sie benötigen ein zusätzliches " -"Programm für die Suche. In der Regel ist dies das Befehlszeilenprogramm " -"locate, das standardmäßig in vielen Distributionen enthalten ist. Sie " -"können überprüfen, ob das richtige Programm verwendet wird, indem Sie die Einstellung \"Locate ausführbare Datei\" " -"überprüfen.

Neben dem erwähnten Programm locate, kann tdeio-locate " -"jedes Programm verwenden, das dieselbe Syntax verwendet. Insbesondere wurde " -"berichtet, dass es mit slocate und rlocate funktioniert." - -#: tdeio_locate.cpp:516 -msgid "Locating %1 ..." -msgstr "Suche %1 ..." - -#: tdeio_locate.cpp:636 -msgid "Finished." -msgstr "Suche abgeschlossen." - -#: tdeio_locate.cpp:774 -msgid "Configure - tdeio-locate" -msgstr "Einstellungen - tdeio-locate" - -#: tdeio_locate.cpp:777 -msgid "General" -msgstr "Allgemeines" - -#: tdeio_locate.cpp:778 -msgid "Filters" -msgstr "Filter" - -#: tdeio_locate.cpp:779 -msgid "Locate" -msgstr "Locate" - -#: tdeio_locate.cpp:799 -msgid "Configuration succesfully updated." -msgstr "Einstellungen wurden übernommen." - -#: tdeio_locate.cpp:801 -msgid "Configuration unchanged." -msgstr "Einstellungen unverändert." - -#: klocateconfigfilterwidget.ui:16 -#, no-c-format -msgid "KLocateConfigFilterWidget" -msgstr "KLocateConfigFilterWidget" - -#: klocateconfigfilterwidget.ui:27 -#, no-c-format -msgid "Filter Settings" -msgstr "Filter Einstellungen" - -#: klocateconfigfilterwidget.ui:38 -#, no-c-format -msgid "" -"A path must match at least one of the regular expressions in the White List " -"and it must not match any of the expressions in the Black List for being " -"displayed as a hit." -msgstr "" -"Damit ein Pfad als Treffer angezeigt wird, muss er mit mindestens einem " -"regulären Ausdruck aus der White List übereinstimmen und darf mit keinem " -"Eintrag aus der Black List übereinstimmen." - -#: klocateconfigfilterwidget.ui:49 -#, no-c-format -msgid "&White List" -msgstr "&White List" - -#: klocateconfigfilterwidget.ui:55 tdeio_locate.kcfg:38 -#, no-c-format -msgid "A path must match at least one of these regular expressions." -msgstr "" -"Pfade müssen mit mindestens einer dieser regulären Ausdrücke übereinstimmen." - -#: klocateconfigfilterwidget.ui:63 -#, no-c-format -msgid "&Black List" -msgstr "&Black List" - -#: klocateconfigfilterwidget.ui:69 tdeio_locate.kcfg:44 -#, no-c-format -msgid "A path may not match any of these regular expressions." -msgstr "Pfade dürfen mit keiner dieser regulären Ausdrücke übereinstimmen." - -#: klocateconfigfilterwidget.ui:77 -#, no-c-format -msgid "" -"Hint: E.g. replacing the default '.' entry by '^/home/user/' will " -"only allow hits in the home directory of user." -msgstr "" -"Tipp: Sie können z.B. den standardmäßigen Eintrag '.' durch '^/home/" -"user/' ersetzen, um nur noch Treffer im Heimatverzeichnis von user " -"anzuzeigen." - -#: klocateconfigfilterwidget.ui:88 -#, no-c-format -msgid "" -"Hint: Adding e.g. '/\\.' will no longer display hidden files (this " -"will be unnecessary in some next version of kde though)." -msgstr "" -"Tipp: Fügen Sie z.B. '/\\.' hinzu, um versteckte Dateien bei der " -"Suche zu ignorieren (in einer der nächsten KDE Versionen wird das unnötig " -"sein)." - -#: klocateconfiglocatewidget.ui:16 -#, no-c-format -msgid "KLocateConfigLocateWidget" -msgstr "KLocateConfigLocateWidget" - -#: klocateconfiglocatewidget.ui:27 -#, no-c-format -msgid "Locate Settings" -msgstr "Einstellungen für Locate" - -#: klocateconfiglocatewidget.ui:38 -#, no-c-format -msgid "" -"

tdeio-locate does not handle the settings of locate, because this setup " -"varies among different distributions. There are even distributions that use " -"replacements like slocate.

\n" -"

To configure locate you should take a look at the manpage of locate. " -"Since most distributions use cron for updating locate's database, it may " -"also be useful to take a look at the manpage of crontab.

" -msgstr "" -"

Sie können die Einstellungen von locate nicht mit tdeio-locate vornehmen, " -"da es dabei große Unterschiede zwischen verschiedenen Distributionen gibt. " -"Einige verwenden sogar ganz andere Ersatzprogramme.

\n" -"

Für die Einstellungen von locate lohnt es sich einen Blick in die Manpage " -"zu locate zu werfen. Da die meisten Distributionen cron zur Aktualisierung " -"der Datenbank für locate verwenden, kann es sich auch lohnen die Manpage zu " -"crontab zu lesen.

" - -#: klocateconfiglocatewidget.ui:52 tdeio_locate.kcfg:51 -#, no-c-format -msgid "Locate Binary" -msgstr "Locate Backend" - -#: klocateconfiglocatewidget.ui:66 -#, no-c-format -msgid "" -"Use these settings only if you really know what you do. Otherwise the " -"default should be ok." -msgstr "" -"Verwenden Sie die folgenden Einstellung nur wenn Sie genau wissen, was Sie " -"tun. Ansonsten sollten die Vorgaben genügen." - -#: klocateconfiglocatewidget.ui:82 -#, no-c-format -msgid "Locate &binary:" -msgstr "&Pfad zu locate:" - -#: klocateconfiglocatewidget.ui:134 -#, no-c-format -msgid "" -"Hint: If you don't specify a value here (which is the default), tdeio-" -"locate will automatically pick slocate, rlocate or locate (in that order)." -msgstr "" -"Tipp: Wenn Sie hier keinen Wert angeben (dies ist die " -"Voreinstellung), wählt tdeio-locate automatisch slocate, rlocate oder locate " -"(in dieser Reihenfolge) aus." - -#: klocateconfiglocatewidget.ui:150 -#, no-c-format -msgid "Additional &arguments:" -msgstr "Zusätzliche &Argumente:" - -#: klocateconfiglocatewidget.ui:199 -#, no-c-format -msgid "" -"Hint: Do not use -r or -i here. The first will confuse tdeio-locate, " -"and the latter can be changed through the \"Case sensitivity\" option." -msgstr "" -"Tipp: Verwenden Sie nicht -r oder -i. Ersteres verwirrt tdeio-locate " -"und letzteres kann durch die Option \"Groß- und Kleinschreibung\" " -"eingestellt werden." - -#: klocateconfigwidget.ui:16 -#, no-c-format -msgid "KLocateConfigWidget" -msgstr "KLocateConfigWidget" - -#: klocateconfigwidget.ui:27 -#, no-c-format -msgid "General Settings" -msgstr "Allgemeine Einstellungen" - -#: klocateconfigwidget.ui:46 -#, no-c-format -msgid "Case se&nsitivity:" -msgstr "&Groß- und Kleinschreibung:" - -#: klocateconfigwidget.ui:72 -#, no-c-format -msgid "Auto" -msgstr "Auto" - -#: klocateconfigwidget.ui:77 -#, no-c-format -msgid "Sensitive" -msgstr "Verwenden" - -#: klocateconfigwidget.ui:82 -#, no-c-format -msgid "Insensitive" -msgstr "Ignorieren" - -#: klocateconfigwidget.ui:102 -#, no-c-format -msgid "" -"Hint: With \"Auto\" case sensitivity a pattern will be case " -"insensitive if it is lowercase and case sensitive if it is mixed- or " -"uppercase." -msgstr "" -"Tipp: Wenn Sie \"Auto\" auswählen wird eine Suche Groß- und " -"Kleinschreibung nur dann unterscheiden, falls Sie nicht durchgehend klein " -"geschrieben ist." - -#: klocateconfigwidget.ui:112 -#, no-c-format -msgid "Collapsing Search Results" -msgstr "Verzeichnisse zusammenfassen" - -#: klocateconfigwidget.ui:142 -#, no-c-format -msgid "&Collapse a directory with more hits:" -msgstr "Verzeichnisse mit mehr Treffern &zusammenfassen:" - -#: klocateconfigwidget.ui:173 tdeio_locate.kcfg:18 -#, no-c-format -msgid "Collapse a directory with more hits." -msgstr "Verzeichnisse mit mehr Treffern zusammenfassen." - -#: klocateconfigwidget.ui:199 -#, no-c-format -msgid "Text of a collapsed &directory:" -msgstr "Text einer &Verzeichnissuche:" - -#: klocateconfigwidget.ui:251 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits and %2 by the name of " -"the directory." -msgstr "" -"Tipp: %1 wird durch die Anzahl der Treffer und %2 durch den " -"Verzeichnisnamen ersetzt." - -#: klocateconfigwidget.ui:267 -#, no-c-format -msgid "&Icon of a collapsed directory:" -msgstr "&Symbol einer Verzeichnissuche:" - -#: klocateconfigwidget.ui:293 -#, no-c-format -msgid "Blue" -msgstr "Blau" - -#: klocateconfigwidget.ui:301 -#, no-c-format -msgid "Green" -msgstr "Grün" - -#: klocateconfigwidget.ui:309 -#, no-c-format -msgid "Grey" -msgstr "Grau" - -#: klocateconfigwidget.ui:317 -#, no-c-format -msgid "Orange" -msgstr "Orange" - -#: klocateconfigwidget.ui:325 -#, no-c-format -msgid "Red" -msgstr "Rot" - -#: klocateconfigwidget.ui:333 -#, no-c-format -msgid "Violet" -msgstr "Violett" - -#: klocateconfigwidget.ui:341 -#, no-c-format -msgid "Yellow" -msgstr "Gelb" - -#: tdeio_locate.kcfg:11 -#, no-c-format -msgid "Case sensitivity" -msgstr "Groß- und Kleinschreibung" - -#: tdeio_locate.kcfg:12 -#, no-c-format -msgid "" -"0 for automatic case sensitivity determination (lowercase pattern -> case " -"insensitive, upper- or mixedcase pattern -> case sensitive), 1 for case " -"sensitive and 2 for case insensitive." -msgstr "" -"0 für die automatische Ermittlung der Groß-/Kleinschreibung (Muster in " -"Kleinbuchstaben -> keine Groß-/Kleinschreibung, Muster in Groß- oder " -"Gemischtschreibung -> Groß-/Kleinschreibung), 1 für Groß-/Kleinschreibung " -"und 2 für keine Groß-/Kleinschreibung." - -#: tdeio_locate.kcfg:17 -#, no-c-format -msgid "Collapse directory" -msgstr "Verzeichnissuche" - -#: tdeio_locate.kcfg:23 -#, no-c-format -msgid "How to display a collapsed directory entry" -msgstr "Wie eine Verzeichnissuche angezeigt werden soll" - -#: tdeio_locate.kcfg:24 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits, %2 by the name of the " -"directory." -msgstr "" -"Tipp: %1 wird durch die Anzahl der Treffer und %2 durch den " -"Verzeichnisnamen ersetzt." - -#: tdeio_locate.kcfg:29 -#, no-c-format -msgid "Icon to use for a collapsed directory entry" -msgstr "Symbol welches für eine Verzeichnissuche verwendet werden soll" - -#: tdeio_locate.kcfg:30 -#, no-c-format -msgid "0-Blue, 1-Green, 2-Grey, 3-Orange, 4-Red, 5-Violet, 6-Yellow" -msgstr "0-Blau, 1-Grün, 2-Grau, 3-Orange, 4-Rot, 5-Violett, 6-Gelb" - -#: tdeio_locate.kcfg:37 -#, no-c-format -msgid "White list" -msgstr "Weiße Liste" - -#: tdeio_locate.kcfg:43 -#, no-c-format -msgid "Black list" -msgstr "Schwarze Liste" - -#: tdeio_locate.kcfg:56 -#, no-c-format -msgid "Additional Arguments for locate" -msgstr "Zusätzliche Argumente für locate" - -#: tdeio_locate.kcfg:57 -#, no-c-format -msgid "" -"Do not use -r or -i here. The first will confuse tdeio-locate, while the " -"latter can be changed through the caseSensitivity option." -msgstr "" -"Tipp: Verwenden Sie nicht -r oder -i. Ersteres verwirrt tdeio-locate " -"und letzteres kann durch die Option \"Groß- und Kleinschreibung\" " -"eingestellt werden." - -#~ msgid "" -#~ "Hint: You may for example choose to use slocate instead of plain " -#~ "old locate." -#~ msgstr "" -#~ "Tipp: Sie könnten hier z.B. slocate anstelle von locate verwenden." - -#~ msgid "(%1 Hits) %2" -#~ msgstr "(%1 Treffer) %2" diff --git a/po/fr/tdeio-locate.po b/po/fr/tdeio-locate.po deleted file mode 100644 index 1b920ef..0000000 --- a/po/fr/tdeio-locate.po +++ /dev/null @@ -1,353 +0,0 @@ -# translation of tdeio_locate.po to French -# tdeio-locate: KDE I/O Slave for the locate command -# -# Copyright (C) 2004 by Armin Straub -# linux@arminstraub.de -# -# This file is distributed under the same license as tdeio-locate. -# Laurent Rathle , 2004. -msgid "" -msgstr "" -"Project-Id-Version: tdeio_locate\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2021-07-07 18:33+0000\n" -"PO-Revision-Date: 2004-10-21 16:52+0200\n" -"Last-Translator: Laurent Rathle \n" -"Language-Team: French \n" -"Language: fr\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"X-Generator: KBabel 1.9\n" - -#. Instead of a literal translation, add your name to the end of the list (separated by a comma). -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "" - -#. Instead of a literal translation, add your email to the end of the list (separated by a comma). -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "" - -#: tdeio_locate.cpp:351 -msgid "" -"

\"%1\" could not be started.

Please note that tdeio-locate can't " -"be used on its own. You need an additional program for doing searches. " -"Typically this is the command line tool locate that can be found in " -"many distributions by default. You can check if the correct tool is used by " -"looking at the setting \"Locate Binary\"." -"

Besides the mentioned tool locate, tdeio-locate can use any tool " -"that uses the same syntax. In particular, it was reported to work with " -"slocate and rlocate." -msgstr "" - -#: tdeio_locate.cpp:516 -msgid "Locating %1 ..." -msgstr "Recherche de %1 en cours ..." - -#: tdeio_locate.cpp:636 -msgid "Finished." -msgstr "Terminé." - -#: tdeio_locate.cpp:774 -msgid "Configure - tdeio-locate" -msgstr "" - -#: tdeio_locate.cpp:777 -msgid "General" -msgstr "" - -#: tdeio_locate.cpp:778 -msgid "Filters" -msgstr "" - -#: tdeio_locate.cpp:779 -msgid "Locate" -msgstr "" - -#: tdeio_locate.cpp:799 -msgid "Configuration succesfully updated." -msgstr "" - -#: tdeio_locate.cpp:801 -msgid "Configuration unchanged." -msgstr "" - -#: klocateconfigfilterwidget.ui:16 -#, no-c-format -msgid "KLocateConfigFilterWidget" -msgstr "" - -#: klocateconfigfilterwidget.ui:27 -#, no-c-format -msgid "Filter Settings" -msgstr "" - -#: klocateconfigfilterwidget.ui:38 -#, no-c-format -msgid "" -"A path must match at least one of the regular expressions in the White List " -"and it must not match any of the expressions in the Black List for being " -"displayed as a hit." -msgstr "" - -#: klocateconfigfilterwidget.ui:49 -#, no-c-format -msgid "&White List" -msgstr "" - -#: klocateconfigfilterwidget.ui:55 tdeio_locate.kcfg:38 -#, no-c-format -msgid "A path must match at least one of these regular expressions." -msgstr "" - -#: klocateconfigfilterwidget.ui:63 -#, no-c-format -msgid "&Black List" -msgstr "" - -#: klocateconfigfilterwidget.ui:69 tdeio_locate.kcfg:44 -#, no-c-format -msgid "A path may not match any of these regular expressions." -msgstr "" - -#: klocateconfigfilterwidget.ui:77 -#, no-c-format -msgid "" -"Hint: E.g. replacing the default '.' entry by '^/home/user/' will " -"only allow hits in the home directory of user." -msgstr "" - -#: klocateconfigfilterwidget.ui:88 -#, no-c-format -msgid "" -"Hint: Adding e.g. '/\\.' will no longer display hidden files (this " -"will be unnecessary in some next version of kde though)." -msgstr "" - -#: klocateconfiglocatewidget.ui:16 -#, no-c-format -msgid "KLocateConfigLocateWidget" -msgstr "" - -#: klocateconfiglocatewidget.ui:27 -#, no-c-format -msgid "Locate Settings" -msgstr "" - -#: klocateconfiglocatewidget.ui:38 -#, no-c-format -msgid "" -"

tdeio-locate does not handle the settings of locate, because this setup " -"varies among different distributions. There are even distributions that use " -"replacements like slocate.

\n" -"

To configure locate you should take a look at the manpage of locate. " -"Since most distributions use cron for updating locate's database, it may " -"also be useful to take a look at the manpage of crontab.

" -msgstr "" - -#: klocateconfiglocatewidget.ui:52 tdeio_locate.kcfg:51 -#, no-c-format -msgid "Locate Binary" -msgstr "" - -#: klocateconfiglocatewidget.ui:66 -#, no-c-format -msgid "" -"Use these settings only if you really know what you do. Otherwise the " -"default should be ok." -msgstr "" - -#: klocateconfiglocatewidget.ui:82 -#, no-c-format -msgid "Locate &binary:" -msgstr "" - -#: klocateconfiglocatewidget.ui:134 -#, no-c-format -msgid "" -"Hint: If you don't specify a value here (which is the default), tdeio-" -"locate will automatically pick slocate, rlocate or locate (in that order)." -msgstr "" - -#: klocateconfiglocatewidget.ui:150 -#, no-c-format -msgid "Additional &arguments:" -msgstr "" - -#: klocateconfiglocatewidget.ui:199 -#, no-c-format -msgid "" -"Hint: Do not use -r or -i here. The first will confuse tdeio-locate, " -"and the latter can be changed through the \"Case sensitivity\" option." -msgstr "" - -#: klocateconfigwidget.ui:16 -#, no-c-format -msgid "KLocateConfigWidget" -msgstr "" - -#: klocateconfigwidget.ui:27 -#, no-c-format -msgid "General Settings" -msgstr "" - -#: klocateconfigwidget.ui:46 -#, no-c-format -msgid "Case se&nsitivity:" -msgstr "" - -#: klocateconfigwidget.ui:72 -#, no-c-format -msgid "Auto" -msgstr "" - -#: klocateconfigwidget.ui:77 -#, no-c-format -msgid "Sensitive" -msgstr "" - -#: klocateconfigwidget.ui:82 -#, no-c-format -msgid "Insensitive" -msgstr "" - -#: klocateconfigwidget.ui:102 -#, no-c-format -msgid "" -"Hint: With \"Auto\" case sensitivity a pattern will be case " -"insensitive if it is lowercase and case sensitive if it is mixed- or " -"uppercase." -msgstr "" - -#: klocateconfigwidget.ui:112 -#, no-c-format -msgid "Collapsing Search Results" -msgstr "" - -#: klocateconfigwidget.ui:142 -#, no-c-format -msgid "&Collapse a directory with more hits:" -msgstr "" - -#: klocateconfigwidget.ui:173 tdeio_locate.kcfg:18 -#, no-c-format -msgid "Collapse a directory with more hits." -msgstr "" - -#: klocateconfigwidget.ui:199 -#, no-c-format -msgid "Text of a collapsed &directory:" -msgstr "" - -#: klocateconfigwidget.ui:251 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits and %2 by the name of " -"the directory." -msgstr "" - -#: klocateconfigwidget.ui:267 -#, no-c-format -msgid "&Icon of a collapsed directory:" -msgstr "" - -#: klocateconfigwidget.ui:293 -#, no-c-format -msgid "Blue" -msgstr "" - -#: klocateconfigwidget.ui:301 -#, no-c-format -msgid "Green" -msgstr "" - -#: klocateconfigwidget.ui:309 -#, no-c-format -msgid "Grey" -msgstr "" - -#: klocateconfigwidget.ui:317 -#, no-c-format -msgid "Orange" -msgstr "" - -#: klocateconfigwidget.ui:325 -#, no-c-format -msgid "Red" -msgstr "" - -#: klocateconfigwidget.ui:333 -#, no-c-format -msgid "Violet" -msgstr "" - -#: klocateconfigwidget.ui:341 -#, no-c-format -msgid "Yellow" -msgstr "" - -#: tdeio_locate.kcfg:11 -#, no-c-format -msgid "Case sensitivity" -msgstr "" - -#: tdeio_locate.kcfg:12 -#, no-c-format -msgid "" -"0 for automatic case sensitivity determination (lowercase pattern -> case " -"insensitive, upper- or mixedcase pattern -> case sensitive), 1 for case " -"sensitive and 2 for case insensitive." -msgstr "" - -#: tdeio_locate.kcfg:17 -#, no-c-format -msgid "Collapse directory" -msgstr "" - -#: tdeio_locate.kcfg:23 -#, no-c-format -msgid "How to display a collapsed directory entry" -msgstr "" - -#: tdeio_locate.kcfg:24 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits, %2 by the name of the " -"directory." -msgstr "" - -#: tdeio_locate.kcfg:29 -#, no-c-format -msgid "Icon to use for a collapsed directory entry" -msgstr "" - -#: tdeio_locate.kcfg:30 -#, no-c-format -msgid "0-Blue, 1-Green, 2-Grey, 3-Orange, 4-Red, 5-Violet, 6-Yellow" -msgstr "" - -#: tdeio_locate.kcfg:37 -#, no-c-format -msgid "White list" -msgstr "" - -#: tdeio_locate.kcfg:43 -#, no-c-format -msgid "Black list" -msgstr "" - -#: tdeio_locate.kcfg:56 -#, no-c-format -msgid "Additional Arguments for locate" -msgstr "" - -#: tdeio_locate.kcfg:57 -#, no-c-format -msgid "" -"Do not use -r or -i here. The first will confuse tdeio-locate, while the " -"latter can be changed through the caseSensitivity option." -msgstr "" diff --git a/po/pt/tdeio-locate.po b/po/pt/tdeio-locate.po deleted file mode 100644 index f4e3040..0000000 --- a/po/pt/tdeio-locate.po +++ /dev/null @@ -1,348 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# Hugo Carvalho , 2020, 2021. -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-07-07 18:33+0000\n" -"PO-Revision-Date: 2021-12-12 18:00+0000\n" -"Last-Translator: Hugo Carvalho \n" -"Language-Team: Portuguese \n" -"Language: pt\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" -"Plural-Forms: nplurals=2; plural=n > 1;\n" -"X-Generator: Weblate 4.9.1\n" - -#. Instead of a literal translation, add your name to the end of the list (separated by a comma). -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "Hugo Carvalho" - -#. Instead of a literal translation, add your email to the end of the list (separated by a comma). -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "hugokarvalho@hotmail.com" - -#: tdeio_locate.cpp:351 -msgid "" -"

\"%1\" could not be started.

Please note that tdeio-locate can't " -"be used on its own. You need an additional program for doing searches. " -"Typically this is the command line tool locate that can be found in " -"many distributions by default. You can check if the correct tool is used by " -"looking at the setting \"Locate Binary\"." -"

Besides the mentioned tool locate, tdeio-locate can use any tool " -"that uses the same syntax. In particular, it was reported to work with " -"slocate and rlocate." -msgstr "" - -#: tdeio_locate.cpp:516 -msgid "Locating %1 ..." -msgstr "" - -#: tdeio_locate.cpp:636 -msgid "Finished." -msgstr "" - -#: tdeio_locate.cpp:774 -msgid "Configure - tdeio-locate" -msgstr "" - -#: tdeio_locate.cpp:777 -msgid "General" -msgstr "Geral" - -#: tdeio_locate.cpp:778 -msgid "Filters" -msgstr "Filtros" - -#: tdeio_locate.cpp:779 -msgid "Locate" -msgstr "Localizar" - -#: tdeio_locate.cpp:799 -msgid "Configuration succesfully updated." -msgstr "" - -#: tdeio_locate.cpp:801 -msgid "Configuration unchanged." -msgstr "" - -#: klocateconfigfilterwidget.ui:16 -#, no-c-format -msgid "KLocateConfigFilterWidget" -msgstr "" - -#: klocateconfigfilterwidget.ui:27 -#, no-c-format -msgid "Filter Settings" -msgstr "" - -#: klocateconfigfilterwidget.ui:38 -#, no-c-format -msgid "" -"A path must match at least one of the regular expressions in the White List " -"and it must not match any of the expressions in the Black List for being " -"displayed as a hit." -msgstr "" - -#: klocateconfigfilterwidget.ui:49 -#, no-c-format -msgid "&White List" -msgstr "" - -#: klocateconfigfilterwidget.ui:55 tdeio_locate.kcfg:38 -#, no-c-format -msgid "A path must match at least one of these regular expressions." -msgstr "" - -#: klocateconfigfilterwidget.ui:63 -#, no-c-format -msgid "&Black List" -msgstr "" - -#: klocateconfigfilterwidget.ui:69 tdeio_locate.kcfg:44 -#, no-c-format -msgid "A path may not match any of these regular expressions." -msgstr "" - -#: klocateconfigfilterwidget.ui:77 -#, no-c-format -msgid "" -"Hint: E.g. replacing the default '.' entry by '^/home/user/' will " -"only allow hits in the home directory of user." -msgstr "" - -#: klocateconfigfilterwidget.ui:88 -#, no-c-format -msgid "" -"Hint: Adding e.g. '/\\.' will no longer display hidden files (this " -"will be unnecessary in some next version of kde though)." -msgstr "" - -#: klocateconfiglocatewidget.ui:16 -#, no-c-format -msgid "KLocateConfigLocateWidget" -msgstr "" - -#: klocateconfiglocatewidget.ui:27 -#, no-c-format -msgid "Locate Settings" -msgstr "" - -#: klocateconfiglocatewidget.ui:38 -#, no-c-format -msgid "" -"

tdeio-locate does not handle the settings of locate, because this setup " -"varies among different distributions. There are even distributions that use " -"replacements like slocate.

\n" -"

To configure locate you should take a look at the manpage of locate. " -"Since most distributions use cron for updating locate's database, it may " -"also be useful to take a look at the manpage of crontab.

" -msgstr "" - -#: klocateconfiglocatewidget.ui:52 tdeio_locate.kcfg:51 -#, no-c-format -msgid "Locate Binary" -msgstr "" - -#: klocateconfiglocatewidget.ui:66 -#, no-c-format -msgid "" -"Use these settings only if you really know what you do. Otherwise the " -"default should be ok." -msgstr "" - -#: klocateconfiglocatewidget.ui:82 -#, no-c-format -msgid "Locate &binary:" -msgstr "" - -#: klocateconfiglocatewidget.ui:134 -#, no-c-format -msgid "" -"Hint: If you don't specify a value here (which is the default), tdeio-" -"locate will automatically pick slocate, rlocate or locate (in that order)." -msgstr "" - -#: klocateconfiglocatewidget.ui:150 -#, no-c-format -msgid "Additional &arguments:" -msgstr "" - -#: klocateconfiglocatewidget.ui:199 -#, no-c-format -msgid "" -"Hint: Do not use -r or -i here. The first will confuse tdeio-locate, " -"and the latter can be changed through the \"Case sensitivity\" option." -msgstr "" - -#: klocateconfigwidget.ui:16 -#, no-c-format -msgid "KLocateConfigWidget" -msgstr "" - -#: klocateconfigwidget.ui:27 -#, no-c-format -msgid "General Settings" -msgstr "" - -#: klocateconfigwidget.ui:46 -#, no-c-format -msgid "Case se&nsitivity:" -msgstr "" - -#: klocateconfigwidget.ui:72 -#, no-c-format -msgid "Auto" -msgstr "" - -#: klocateconfigwidget.ui:77 -#, no-c-format -msgid "Sensitive" -msgstr "" - -#: klocateconfigwidget.ui:82 -#, no-c-format -msgid "Insensitive" -msgstr "" - -#: klocateconfigwidget.ui:102 -#, no-c-format -msgid "" -"Hint: With \"Auto\" case sensitivity a pattern will be case " -"insensitive if it is lowercase and case sensitive if it is mixed- or " -"uppercase." -msgstr "" - -#: klocateconfigwidget.ui:112 -#, no-c-format -msgid "Collapsing Search Results" -msgstr "" - -#: klocateconfigwidget.ui:142 -#, no-c-format -msgid "&Collapse a directory with more hits:" -msgstr "" - -#: klocateconfigwidget.ui:173 tdeio_locate.kcfg:18 -#, no-c-format -msgid "Collapse a directory with more hits." -msgstr "" - -#: klocateconfigwidget.ui:199 -#, no-c-format -msgid "Text of a collapsed &directory:" -msgstr "" - -#: klocateconfigwidget.ui:251 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits and %2 by the name of " -"the directory." -msgstr "" - -#: klocateconfigwidget.ui:267 -#, no-c-format -msgid "&Icon of a collapsed directory:" -msgstr "" - -#: klocateconfigwidget.ui:293 -#, no-c-format -msgid "Blue" -msgstr "" - -#: klocateconfigwidget.ui:301 -#, no-c-format -msgid "Green" -msgstr "" - -#: klocateconfigwidget.ui:309 -#, no-c-format -msgid "Grey" -msgstr "" - -#: klocateconfigwidget.ui:317 -#, no-c-format -msgid "Orange" -msgstr "" - -#: klocateconfigwidget.ui:325 -#, no-c-format -msgid "Red" -msgstr "" - -#: klocateconfigwidget.ui:333 -#, no-c-format -msgid "Violet" -msgstr "" - -#: klocateconfigwidget.ui:341 -#, no-c-format -msgid "Yellow" -msgstr "" - -#: tdeio_locate.kcfg:11 -#, no-c-format -msgid "Case sensitivity" -msgstr "" - -#: tdeio_locate.kcfg:12 -#, no-c-format -msgid "" -"0 for automatic case sensitivity determination (lowercase pattern -> case " -"insensitive, upper- or mixedcase pattern -> case sensitive), 1 for case " -"sensitive and 2 for case insensitive." -msgstr "" - -#: tdeio_locate.kcfg:17 -#, no-c-format -msgid "Collapse directory" -msgstr "" - -#: tdeio_locate.kcfg:23 -#, no-c-format -msgid "How to display a collapsed directory entry" -msgstr "" - -#: tdeio_locate.kcfg:24 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits, %2 by the name of the " -"directory." -msgstr "" - -#: tdeio_locate.kcfg:29 -#, no-c-format -msgid "Icon to use for a collapsed directory entry" -msgstr "" - -#: tdeio_locate.kcfg:30 -#, no-c-format -msgid "0-Blue, 1-Green, 2-Grey, 3-Orange, 4-Red, 5-Violet, 6-Yellow" -msgstr "" - -#: tdeio_locate.kcfg:37 -#, no-c-format -msgid "White list" -msgstr "" - -#: tdeio_locate.kcfg:43 -#, no-c-format -msgid "Black list" -msgstr "" - -#: tdeio_locate.kcfg:56 -#, no-c-format -msgid "Additional Arguments for locate" -msgstr "" - -#: tdeio_locate.kcfg:57 -#, no-c-format -msgid "" -"Do not use -r or -i here. The first will confuse tdeio-locate, while the " -"latter can be changed through the caseSensitivity option." -msgstr "" diff --git a/po/tdeio-locate.pot b/po/tdeio-locate.pot deleted file mode 100644 index c80cb9a..0000000 --- a/po/tdeio-locate.pot +++ /dev/null @@ -1,348 +0,0 @@ -# SOME DESCRIPTIVE TITLE. -# FIRST AUTHOR , YEAR. -# -#, fuzzy -msgid "" -msgstr "" -"Project-Id-Version: PACKAGE VERSION\n" -"POT-Creation-Date: 2021-07-07 18:33+0000\n" -"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" -"Last-Translator: FULL NAME \n" -"Language-Team: LANGUAGE \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Instead of a literal translation, add your name to the end of the list (separated by a comma). -#, ignore-inconsistent -msgid "" -"_: NAME OF TRANSLATORS\n" -"Your names" -msgstr "" - -#. Instead of a literal translation, add your email to the end of the list (separated by a comma). -#, ignore-inconsistent -msgid "" -"_: EMAIL OF TRANSLATORS\n" -"Your emails" -msgstr "" - -#: tdeio_locate.cpp:351 -msgid "" -"

\"%1\" could not be started.

Please note that tdeio-locate can't " -"be used on its own. You need an additional program for doing searches. " -"Typically this is the command line tool locate that can be found in " -"many distributions by default. You can check if the correct tool is used by " -"looking at the setting \"Locate Binary\"." -"

Besides the mentioned tool locate, tdeio-locate can use any tool " -"that uses the same syntax. In particular, it was reported to work with " -"slocate and rlocate." -msgstr "" - -#: tdeio_locate.cpp:516 -msgid "Locating %1 ..." -msgstr "" - -#: tdeio_locate.cpp:636 -msgid "Finished." -msgstr "" - -#: tdeio_locate.cpp:774 -msgid "Configure - tdeio-locate" -msgstr "" - -#: tdeio_locate.cpp:777 -msgid "General" -msgstr "" - -#: tdeio_locate.cpp:778 -msgid "Filters" -msgstr "" - -#: tdeio_locate.cpp:779 -msgid "Locate" -msgstr "" - -#: tdeio_locate.cpp:799 -msgid "Configuration succesfully updated." -msgstr "" - -#: tdeio_locate.cpp:801 -msgid "Configuration unchanged." -msgstr "" - -#: klocateconfigfilterwidget.ui:16 -#, no-c-format -msgid "KLocateConfigFilterWidget" -msgstr "" - -#: klocateconfigfilterwidget.ui:27 -#, no-c-format -msgid "Filter Settings" -msgstr "" - -#: klocateconfigfilterwidget.ui:38 -#, no-c-format -msgid "" -"A path must match at least one of the regular expressions in the White List " -"and it must not match any of the expressions in the Black List for being " -"displayed as a hit." -msgstr "" - -#: klocateconfigfilterwidget.ui:49 -#, no-c-format -msgid "&White List" -msgstr "" - -#: klocateconfigfilterwidget.ui:55 tdeio_locate.kcfg:38 -#, no-c-format -msgid "A path must match at least one of these regular expressions." -msgstr "" - -#: klocateconfigfilterwidget.ui:63 -#, no-c-format -msgid "&Black List" -msgstr "" - -#: klocateconfigfilterwidget.ui:69 tdeio_locate.kcfg:44 -#, no-c-format -msgid "A path may not match any of these regular expressions." -msgstr "" - -#: klocateconfigfilterwidget.ui:77 -#, no-c-format -msgid "" -"Hint: E.g. replacing the default '.' entry by '^/home/user/' will " -"only allow hits in the home directory of user." -msgstr "" - -#: klocateconfigfilterwidget.ui:88 -#, no-c-format -msgid "" -"Hint: Adding e.g. '/\\.' will no longer display hidden files (this " -"will be unnecessary in some next version of kde though)." -msgstr "" - -#: klocateconfiglocatewidget.ui:16 -#, no-c-format -msgid "KLocateConfigLocateWidget" -msgstr "" - -#: klocateconfiglocatewidget.ui:27 -#, no-c-format -msgid "Locate Settings" -msgstr "" - -#: klocateconfiglocatewidget.ui:38 -#, no-c-format -msgid "" -"

tdeio-locate does not handle the settings of locate, because this setup " -"varies among different distributions. There are even distributions that use " -"replacements like slocate.

\n" -"

To configure locate you should take a look at the manpage of locate. " -"Since most distributions use cron for updating locate's database, it may " -"also be useful to take a look at the manpage of crontab.

" -msgstr "" - -#: klocateconfiglocatewidget.ui:52 tdeio_locate.kcfg:51 -#, no-c-format -msgid "Locate Binary" -msgstr "" - -#: klocateconfiglocatewidget.ui:66 -#, no-c-format -msgid "" -"Use these settings only if you really know what you do. Otherwise the " -"default should be ok." -msgstr "" - -#: klocateconfiglocatewidget.ui:82 -#, no-c-format -msgid "Locate &binary:" -msgstr "" - -#: klocateconfiglocatewidget.ui:134 -#, no-c-format -msgid "" -"Hint: If you don't specify a value here (which is the default), tdeio-" -"locate will automatically pick slocate, rlocate or locate (in that order)." -msgstr "" - -#: klocateconfiglocatewidget.ui:150 -#, no-c-format -msgid "Additional &arguments:" -msgstr "" - -#: klocateconfiglocatewidget.ui:199 -#, no-c-format -msgid "" -"Hint: Do not use -r or -i here. The first will confuse tdeio-locate, " -"and the latter can be changed through the \"Case sensitivity\" option." -msgstr "" - -#: klocateconfigwidget.ui:16 -#, no-c-format -msgid "KLocateConfigWidget" -msgstr "" - -#: klocateconfigwidget.ui:27 -#, no-c-format -msgid "General Settings" -msgstr "" - -#: klocateconfigwidget.ui:46 -#, no-c-format -msgid "Case se&nsitivity:" -msgstr "" - -#: klocateconfigwidget.ui:72 -#, no-c-format -msgid "Auto" -msgstr "" - -#: klocateconfigwidget.ui:77 -#, no-c-format -msgid "Sensitive" -msgstr "" - -#: klocateconfigwidget.ui:82 -#, no-c-format -msgid "Insensitive" -msgstr "" - -#: klocateconfigwidget.ui:102 -#, no-c-format -msgid "" -"Hint: With \"Auto\" case sensitivity a pattern will be case " -"insensitive if it is lowercase and case sensitive if it is mixed- or " -"uppercase." -msgstr "" - -#: klocateconfigwidget.ui:112 -#, no-c-format -msgid "Collapsing Search Results" -msgstr "" - -#: klocateconfigwidget.ui:142 -#, no-c-format -msgid "&Collapse a directory with more hits:" -msgstr "" - -#: klocateconfigwidget.ui:173 tdeio_locate.kcfg:18 -#, no-c-format -msgid "Collapse a directory with more hits." -msgstr "" - -#: klocateconfigwidget.ui:199 -#, no-c-format -msgid "Text of a collapsed &directory:" -msgstr "" - -#: klocateconfigwidget.ui:251 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits and %2 by the name of " -"the directory." -msgstr "" - -#: klocateconfigwidget.ui:267 -#, no-c-format -msgid "&Icon of a collapsed directory:" -msgstr "" - -#: klocateconfigwidget.ui:293 -#, no-c-format -msgid "Blue" -msgstr "" - -#: klocateconfigwidget.ui:301 -#, no-c-format -msgid "Green" -msgstr "" - -#: klocateconfigwidget.ui:309 -#, no-c-format -msgid "Grey" -msgstr "" - -#: klocateconfigwidget.ui:317 -#, no-c-format -msgid "Orange" -msgstr "" - -#: klocateconfigwidget.ui:325 -#, no-c-format -msgid "Red" -msgstr "" - -#: klocateconfigwidget.ui:333 -#, no-c-format -msgid "Violet" -msgstr "" - -#: klocateconfigwidget.ui:341 -#, no-c-format -msgid "Yellow" -msgstr "" - -#: tdeio_locate.kcfg:11 -#, no-c-format -msgid "Case sensitivity" -msgstr "" - -#: tdeio_locate.kcfg:12 -#, no-c-format -msgid "" -"0 for automatic case sensitivity determination (lowercase pattern -> case " -"insensitive, upper- or mixedcase pattern -> case sensitive), 1 for case " -"sensitive and 2 for case insensitive." -msgstr "" - -#: tdeio_locate.kcfg:17 -#, no-c-format -msgid "Collapse directory" -msgstr "" - -#: tdeio_locate.kcfg:23 -#, no-c-format -msgid "How to display a collapsed directory entry" -msgstr "" - -#: tdeio_locate.kcfg:24 -#, no-c-format -msgid "" -"Hint: %1 is substituted by the number of hits, %2 by the name of the " -"directory." -msgstr "" - -#: tdeio_locate.kcfg:29 -#, no-c-format -msgid "Icon to use for a collapsed directory entry" -msgstr "" - -#: tdeio_locate.kcfg:30 -#, no-c-format -msgid "0-Blue, 1-Green, 2-Grey, 3-Orange, 4-Red, 5-Violet, 6-Yellow" -msgstr "" - -#: tdeio_locate.kcfg:37 -#, no-c-format -msgid "White list" -msgstr "" - -#: tdeio_locate.kcfg:43 -#, no-c-format -msgid "Black list" -msgstr "" - -#: tdeio_locate.kcfg:56 -#, no-c-format -msgid "Additional Arguments for locate" -msgstr "" - -#: tdeio_locate.kcfg:57 -#, no-c-format -msgid "" -"Do not use -r or -i here. The first will confuse tdeio-locate, while the " -"latter can be changed through the caseSensitivity option." -msgstr ""