From a2fb10f6a3398b4c9d1bc2597129e321f94223bf Mon Sep 17 00:00:00 2001 From: Michele Calgaro Date: Sun, 1 May 2022 21:37:45 +0900 Subject: [PATCH] Clean up non required files. Signed-off-by: Michele Calgaro --- ChangeLog | 0 Doxyfile | 283 - Makefile.cvs | 10 - Makefile.in | 877 --- NEWS | 0 README~ | 6 - TODO | 60 - TODO~ | 35 - acinclude.m4 | 11863 ---------------------------------- aclocal.m4 | 863 --- admin/Doxyfile.am | 102 - admin/Doxyfile.global | 192 - admin/Makefile.common | 37 - admin/acinclude.m4.in | 5972 ----------------- admin/am_edit | 2445 ------- admin/bcheck.pl | 157 - admin/compile | 142 - admin/conf.change.pl | 191 - admin/config.guess | 1464 ----- admin/config.pl | 238 - admin/config.sub | 1575 ----- admin/configure.in.bot.end | 45 - admin/configure.in.min | 57 - admin/cvs.sh | 661 -- admin/debianrules | 43 - admin/depcomp | 530 -- admin/deps.am | 19 - admin/detect-autoconf.pl | 175 - admin/doxygen.sh | 883 --- admin/install-sh | 401 -- admin/libtool.m4.in | 5891 ----------------- admin/ltmain.sh | 6389 ------------------ admin/missing | 353 - admin/mkinstalldirs | 158 - admin/nmcheck | 371 -- admin/oldinclude.m4.in | 192 - admin/pkg.m4.in | 57 - admin/ylwrap | 223 - app.kdevelop | 167 - app.kdevelop.pcs | Bin 29718 -> 0 bytes app.kdevses | 58 - config.h.in | 244 - configure.files | 2 - configure.in.in | 6 - doc/Makefile.am | 6 - doc/Makefile.in | 720 --- doc/en/Makefile.am | 2 - doc/en/Makefile.in | 598 -- doc/en/index.docbook | 555 -- po/Makefile.am | 1 - po/Makefile.in | 549 -- src/Makefile.am~ | 17 - src/Makefile.in | 906 --- src/app.cpp~ | 212 - src/app.h~ | 34 - src/app.lsm | 16 - src/app.protocol~ | 18 - src/appimpl.cpp~ | 700 -- src/appimpl.h~ | 107 - src/appinfo.protocol~ | 18 - src/icons/Makefile.am~ | 5 - src/icons/Makefile.in | 578 -- src/icons/binaryfolder.png~ | Bin 8199 -> 0 bytes src/icons/cachefolder.png~ | Bin 8690 -> 0 bytes src/icons/configfolder.png~ | Bin 4897 -> 0 bytes stamp-h.in | 0 subdirs | 3 - templates/cpp | 19 - templates/h | 19 - 69 files changed, 48520 deletions(-) delete mode 100644 ChangeLog delete mode 100644 Doxyfile delete mode 100644 Makefile.cvs delete mode 100644 Makefile.in delete mode 100644 NEWS delete mode 100644 README~ delete mode 100644 TODO delete mode 100644 TODO~ delete mode 100644 acinclude.m4 delete mode 100644 aclocal.m4 delete mode 100644 admin/Doxyfile.am delete mode 100755 admin/Doxyfile.global delete mode 100644 admin/Makefile.common delete mode 100644 admin/acinclude.m4.in delete mode 100644 admin/am_edit delete mode 100644 admin/bcheck.pl delete mode 100755 admin/compile delete mode 100644 admin/conf.change.pl delete mode 100755 admin/config.guess delete mode 100644 admin/config.pl delete mode 100755 admin/config.sub delete mode 100644 admin/configure.in.bot.end delete mode 100644 admin/configure.in.min delete mode 100644 admin/cvs.sh delete mode 100755 admin/debianrules delete mode 100755 admin/depcomp delete mode 100644 admin/deps.am delete mode 100755 admin/detect-autoconf.pl delete mode 100644 admin/doxygen.sh delete mode 100755 admin/install-sh delete mode 100644 admin/libtool.m4.in delete mode 100644 admin/ltmain.sh delete mode 100755 admin/missing delete mode 100755 admin/mkinstalldirs delete mode 100755 admin/nmcheck delete mode 100644 admin/oldinclude.m4.in delete mode 100644 admin/pkg.m4.in delete mode 100755 admin/ylwrap delete mode 100644 app.kdevelop delete mode 100644 app.kdevelop.pcs delete mode 100644 app.kdevses delete mode 100644 config.h.in delete mode 100644 configure.files delete mode 100644 configure.in.in delete mode 100644 doc/Makefile.am delete mode 100644 doc/Makefile.in delete mode 100644 doc/en/Makefile.am delete mode 100644 doc/en/Makefile.in delete mode 100644 doc/en/index.docbook delete mode 100644 po/Makefile.am delete mode 100644 po/Makefile.in delete mode 100644 src/Makefile.am~ delete mode 100644 src/Makefile.in delete mode 100644 src/app.cpp~ delete mode 100644 src/app.h~ delete mode 100644 src/app.lsm delete mode 100644 src/app.protocol~ delete mode 100644 src/appimpl.cpp~ delete mode 100644 src/appimpl.h~ delete mode 100644 src/appinfo.protocol~ delete mode 100644 src/icons/Makefile.am~ delete mode 100644 src/icons/Makefile.in delete mode 100644 src/icons/binaryfolder.png~ delete mode 100644 src/icons/cachefolder.png~ delete mode 100644 src/icons/configfolder.png~ delete mode 100644 stamp-h.in delete mode 100644 subdirs delete mode 100644 templates/cpp delete mode 100644 templates/h diff --git a/ChangeLog b/ChangeLog deleted file mode 100644 index e69de29..0000000 diff --git a/Doxyfile b/Doxyfile deleted file mode 100644 index 49fd104..0000000 --- a/Doxyfile +++ /dev/null @@ -1,283 +0,0 @@ -# Doxyfile 1.5.1-KDevelop - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- -PROJECT_NAME = app -PROJECT_NUMBER = 0.1 -OUTPUT_DIRECTORY = -CREATE_SUBDIRS = NO -OUTPUT_LANGUAGE = English -USE_WINDOWS_ENCODING = NO -BRIEF_MEMBER_DESC = YES -REPEAT_BRIEF = YES -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the -ALWAYS_DETAILED_SEC = NO -INLINE_INHERITED_MEMB = NO -FULL_PATH_NAMES = NO -STRIP_FROM_PATH = /home/robert/ -STRIP_FROM_INC_PATH = -SHORT_NAMES = NO -JAVADOC_AUTOBRIEF = NO -MULTILINE_CPP_IS_BRIEF = NO -DETAILS_AT_TOP = NO -INHERIT_DOCS = YES -SEPARATE_MEMBER_PAGES = NO -TAB_SIZE = 8 -ALIASES = -OPTIMIZE_OUTPUT_FOR_C = NO -OPTIMIZE_OUTPUT_JAVA = NO -BUILTIN_STL_SUPPORT = NO -DISTRIBUTE_GROUP_DOC = NO -SUBGROUPING = YES -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- -EXTRACT_ALL = NO -EXTRACT_PRIVATE = NO -EXTRACT_STATIC = NO -EXTRACT_LOCAL_CLASSES = YES -EXTRACT_LOCAL_METHODS = NO -HIDE_UNDOC_MEMBERS = NO -HIDE_UNDOC_CLASSES = NO -HIDE_FRIEND_COMPOUNDS = NO -HIDE_IN_BODY_DOCS = NO -INTERNAL_DOCS = NO -CASE_SENSE_NAMES = YES -HIDE_SCOPE_NAMES = NO -SHOW_INCLUDE_FILES = YES -INLINE_INFO = YES -SORT_MEMBER_DOCS = YES -SORT_BRIEF_DOCS = NO -SORT_BY_SCOPE_NAME = NO -GENERATE_TODOLIST = YES -GENERATE_TESTLIST = YES -GENERATE_BUGLIST = YES -GENERATE_DEPRECATEDLIST= YES -ENABLED_SECTIONS = -MAX_INITIALIZER_LINES = 30 -SHOW_USED_FILES = YES -SHOW_DIRECTORIES = YES -FILE_VERSION_FILTER = -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- -QUIET = NO -WARNINGS = YES -WARN_IF_UNDOCUMENTED = YES -WARN_IF_DOC_ERROR = YES -WARN_NO_PARAMDOC = NO -WARN_FORMAT = "$file:$line: $text" -WARN_LOGFILE = -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- -INPUT = /backup/robert/Development/app -FILE_PATTERNS = *.c \ - *.cc \ - *.cxx \ - *.cpp \ - *.c++ \ - *.d \ - *.java \ - *.ii \ - *.ixx \ - *.ipp \ - *.i++ \ - *.inl \ - *.h \ - *.hh \ - *.hxx \ - *.hpp \ - *.h++ \ - *.idl \ - *.odl \ - *.cs \ - *.php \ - *.php3 \ - *.inc \ - *.m \ - *.mm \ - *.dox \ - *.py \ - *.C \ - *.CC \ - *.C++ \ - *.II \ - *.I++ \ - *.H \ - *.HH \ - *.H++ \ - *.CS \ - *.PHP \ - *.PHP3 \ - *.M \ - *.MM \ - *.PY \ - *.C \ - *.H \ - *.tlh \ - *.diff \ - *.patch \ - *.moc \ - *.xpm \ - *.dox -RECURSIVE = yes -EXCLUDE = -EXCLUDE_SYMLINKS = NO -EXCLUDE_PATTERNS = -EXAMPLE_PATH = -EXAMPLE_PATTERNS = * -EXAMPLE_RECURSIVE = NO -IMAGE_PATH = -INPUT_FILTER = -FILTER_PATTERNS = -FILTER_SOURCE_FILES = NO -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- -SOURCE_BROWSER = NO -INLINE_SOURCES = NO -STRIP_CODE_COMMENTS = YES -REFERENCED_BY_RELATION = YES -REFERENCES_RELATION = YES -REFERENCES_LINK_SOURCE = YES -USE_HTAGS = NO -VERBATIM_HEADERS = YES -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- -ALPHABETICAL_INDEX = NO -COLS_IN_ALPHA_INDEX = 5 -IGNORE_PREFIX = -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- -GENERATE_HTML = YES -HTML_OUTPUT = html -HTML_FILE_EXTENSION = .html -HTML_HEADER = -HTML_FOOTER = -HTML_STYLESHEET = -HTML_ALIGN_MEMBERS = YES -GENERATE_HTMLHELP = NO -CHM_FILE = -HHC_LOCATION = -GENERATE_CHI = NO -BINARY_TOC = NO -TOC_EXPAND = NO -DISABLE_INDEX = NO -ENUM_VALUES_PER_LINE = 4 -GENERATE_TREEVIEW = NO -TREEVIEW_WIDTH = 250 -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- -GENERATE_LATEX = YES -LATEX_OUTPUT = latex -LATEX_CMD_NAME = latex -MAKEINDEX_CMD_NAME = makeindex -COMPACT_LATEX = NO -PAPER_TYPE = a4wide -EXTRA_PACKAGES = -LATEX_HEADER = -PDF_HYPERLINKS = NO -USE_PDFLATEX = NO -LATEX_BATCHMODE = NO -LATEX_HIDE_INDICES = NO -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- -GENERATE_RTF = NO -RTF_OUTPUT = rtf -COMPACT_RTF = NO -RTF_HYPERLINKS = NO -RTF_STYLESHEET_FILE = -RTF_EXTENSIONS_FILE = -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- -GENERATE_MAN = NO -MAN_OUTPUT = man -MAN_EXTENSION = .3 -MAN_LINKS = NO -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- -GENERATE_XML = yes -XML_OUTPUT = xml -XML_SCHEMA = -XML_DTD = -XML_PROGRAMLISTING = YES -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- -GENERATE_AUTOGEN_DEF = NO -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- -GENERATE_PERLMOD = NO -PERLMOD_LATEX = NO -PERLMOD_PRETTY = YES -PERLMOD_MAKEVAR_PREFIX = -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- -ENABLE_PREPROCESSING = YES -MACRO_EXPANSION = NO -EXPAND_ONLY_PREDEF = NO -SEARCH_INCLUDES = YES -INCLUDE_PATH = -INCLUDE_FILE_PATTERNS = -PREDEFINED = -EXPAND_AS_DEFINED = -SKIP_FUNCTION_MACROS = YES -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- -TAGFILES = -GENERATE_TAGFILE = app.tag -ALLEXTERNALS = NO -EXTERNAL_GROUPS = YES -PERL_PATH = /usr/bin/perl -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- -CLASS_DIAGRAMS = YES -HIDE_UNDOC_RELATIONS = YES -HAVE_DOT = NO -CLASS_GRAPH = YES -COLLABORATION_GRAPH = YES -GROUP_GRAPHS = YES -UML_LOOK = NO -TEMPLATE_RELATIONS = NO -INCLUDE_GRAPH = YES -INCLUDED_BY_GRAPH = YES -CALL_GRAPH = NO -CALLER_GRAPH = NO -GRAPHICAL_HIERARCHY = YES -DIRECTORY_GRAPH = YES -DOT_IMAGE_FORMAT = png -DOT_PATH = -DOTFILE_DIRS = -MAX_DOT_GRAPH_WIDTH = 1024 -MAX_DOT_GRAPH_HEIGHT = 1024 -MAX_DOT_GRAPH_DEPTH = 1000 -DOT_TRANSPARENT = NO -DOT_MULTI_TARGETS = NO -GENERATE_LEGEND = YES -DOT_CLEANUP = YES -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- -SEARCHENGINE = NO diff --git a/Makefile.cvs b/Makefile.cvs deleted file mode 100644 index 4c0afd1..0000000 --- a/Makefile.cvs +++ /dev/null @@ -1,10 +0,0 @@ -all: - @echo "This Makefile is only for the CVS repository" - @echo "This will be deleted before making the distribution" - @echo "" - $(MAKE) -f admin/Makefile.common cvs - -dist: - $(MAKE) -f admin/Makefile.common dist - -.SILENT: diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index f0e0cf0..0000000 --- a/Makefile.in +++ /dev/null @@ -1,877 +0,0 @@ -# Makefile.in generated by automake 1.9.6 from Makefile.am. -# KDE tags expanded automatically by am_edit - $Revision: 483858 $ -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - TODO admin/compile admin/config.guess admin/config.sub \ - admin/depcomp admin/install-sh admin/ltmain.sh admin/missing \ - admin/mkinstalldirs admin/ylwrap -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.in -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno configure.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -#>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ -#>- html-recursive info-recursive install-data-recursive \ -#>- install-exec-recursive install-info-recursive \ -#>- install-recursive installcheck-recursive installdirs-recursive \ -#>- pdf-recursive ps-recursive uninstall-info-recursive \ -#>- uninstall-recursive -#>+ 6 -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-exec-recursive install-info-recursive \ - install-recursive installcheck-recursive installdirs-recursive \ - pdf-recursive ps-recursive uninstall-info-recursive \ - uninstall-recursive nmcheck-recursive bcheck-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -#>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -#>+ 1 -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AR = @AR@ -ARTSCCONFIG = @ARTSCCONFIG@ -AUTOCONF = @AUTOCONF@ -AUTODIRS = @AUTODIRS@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CONF_FILES = @CONF_FILES@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DCOPIDL = @DCOPIDL@ -DCOPIDL2CPP = @DCOPIDL2CPP@ -DCOPIDLNG = @DCOPIDLNG@ -DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO = @ECHO@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@ -EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ -FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@ -GMSGFMT = @GMSGFMT@ -GREP = @GREP@ -HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@ -KCONFIG_COMPILER = @KCONFIG_COMPILER@ -KDECONFIG = @KDECONFIG@ -KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@ -KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@ -KDE_INCLUDES = @KDE_INCLUDES@ -KDE_LDFLAGS = @KDE_LDFLAGS@ -KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@ -KDE_MT_LIBS = @KDE_MT_LIBS@ -KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@ -KDE_PLUGIN = @KDE_PLUGIN@ -KDE_RPATH = @KDE_RPATH@ -KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@ -KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@ -KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@ -KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@ -KDE_USE_FPIE = @KDE_USE_FPIE@ -KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@ -KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@ -KDE_USE_PIE = @KDE_USE_PIE@ -KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@ -LDFLAGS = @LDFLAGS@ -LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@ -LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@ -LIBCOMPAT = @LIBCOMPAT@ -LIBCRYPT = @LIBCRYPT@ -LIBDL = @LIBDL@ -LIBJPEG = @LIBJPEG@ -LIBOBJS = @LIBOBJS@ -LIBPNG = @LIBPNG@ -LIBPTHREAD = @LIBPTHREAD@ -LIBRESOLV = @LIBRESOLV@ -LIBS = @LIBS@ -LIBSM = @LIBSM@ -LIBSOCKET = @LIBSOCKET@ -LIBTOOL = @LIBTOOL@ -LIBUCB = @LIBUCB@ -LIBUTIL = @LIBUTIL@ -LIBZ = @LIBZ@ -LIB_KAB = @LIB_KAB@ -LIB_KABC = @LIB_KABC@ -LIB_KDECORE = @LIB_KDECORE@ -LIB_KDED = @LIB_KDED@ -LIB_KDEPIM = @LIB_KDEPIM@ -LIB_KDEPRINT = @LIB_KDEPRINT@ -LIB_KDEUI = @LIB_KDEUI@ -LIB_KDNSSD = @LIB_KDNSSD@ -LIB_KFILE = @LIB_KFILE@ -LIB_KFM = @LIB_KFM@ -LIB_KHTML = @LIB_KHTML@ -LIB_KIMPROXY = @LIB_KIMPROXY@ -LIB_KIO = @LIB_KIO@ -LIB_KJS = @LIB_KJS@ -LIB_KNEWSTUFF = @LIB_KNEWSTUFF@ -LIB_KPARTS = @LIB_KPARTS@ -LIB_KSPELL = @LIB_KSPELL@ -LIB_KSYCOCA = @LIB_KSYCOCA@ -LIB_KUNITTEST = @LIB_KUNITTEST@ -LIB_KUTILS = @LIB_KUTILS@ -LIB_POLL = @LIB_POLL@ -LIB_QPE = @LIB_QPE@ -LIB_QT = @LIB_QT@ -LIB_SMB = @LIB_SMB@ -LIB_X11 = @LIB_X11@ -LIB_XEXT = @LIB_XEXT@ -LIB_XRENDER = @LIB_XRENDER@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MAKEKDEWIDGETS = @MAKEKDEWIDGETS@ -MCOPIDL = @MCOPIDL@ -MEINPROC = @MEINPROC@ -MOC = @MOC@ -MSGFMT = @MSGFMT@ -NOOPT_CFLAGS = @NOOPT_CFLAGS@ -NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -QTE_NORTTI = @QTE_NORTTI@ -QT_INCLUDES = @QT_INCLUDES@ -QT_LDFLAGS = @QT_LDFLAGS@ -RANLIB = @RANLIB@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -TOPSUBDIRS = @TOPSUBDIRS@ -UIC = @UIC@ -UIC_TR = @UIC_TR@ -USER_INCLUDES = @USER_INCLUDES@ -USER_LDFLAGS = @USER_LDFLAGS@ -USE_EXCEPTIONS = @USE_EXCEPTIONS@ -USE_RTTI = @USE_RTTI@ -USE_THREADS = @USE_THREADS@ -VERSION = @VERSION@ -WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@ -XGETTEXT = @XGETTEXT@ -XMKMF = @XMKMF@ -XMLLINT = @XMLLINT@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_INCLUDES = @X_INCLUDES@ -X_LDFLAGS = @X_LDFLAGS@ -X_PRE_LIBS = @X_PRE_LIBS@ -X_RPATH = @X_RPATH@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ -all_includes = @all_includes@ -all_libraries = @all_libraries@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ -am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -include_ARTS_FALSE = @include_ARTS_FALSE@ -include_ARTS_TRUE = @include_ARTS_TRUE@ -include_x11_FALSE = @include_x11_FALSE@ -include_x11_TRUE = @include_x11_TRUE@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -kde_appsdir = @kde_appsdir@ -kde_bindir = @kde_bindir@ -kde_confdir = @kde_confdir@ -kde_datadir = @kde_datadir@ -kde_htmldir = @kde_htmldir@ -kde_icondir = @kde_icondir@ -kde_includes = @kde_includes@ -kde_kcfgdir = @kde_kcfgdir@ -kde_libraries = @kde_libraries@ -kde_libs_htmldir = @kde_libs_htmldir@ -kde_libs_prefix = @kde_libs_prefix@ -kde_locale = @kde_locale@ -kde_mimedir = @kde_mimedir@ -kde_moduledir = @kde_moduledir@ -kde_qtver = @kde_qtver@ -kde_servicesdir = @kde_servicesdir@ -kde_servicetypesdir = @kde_servicetypesdir@ -kde_sounddir = @kde_sounddir@ -kde_styledir = @kde_styledir@ -kde_templatesdir = @kde_templatesdir@ -kde_wallpaperdir = @kde_wallpaperdir@ -kde_widgetdir = @kde_widgetdir@ -kdeinitdir = @kdeinitdir@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -qt_includes = @qt_includes@ -qt_libraries = @qt_libraries@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -unsermake_enable_pch_FALSE = @unsermake_enable_pch_FALSE@ -unsermake_enable_pch_TRUE = @unsermake_enable_pch_TRUE@ -x_includes = @x_includes@ -x_libraries = @x_libraries@ -xdg_appsdir = @xdg_appsdir@ -xdg_directorydir = @xdg_directorydir@ -xdg_menudir = @xdg_menudir@ -SUBDIRS = $(TOPSUBDIRS) -MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4 configure.files -EXTRA_DIST = admin COPYING configure.in.in -#>- all: config.h -#>+ 1 -all: docs-am config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) -#>- @for dep in $?; do \ -#>- case '$(am__configure_deps)' in \ -#>- *$$dep*) \ -#>- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ -#>- cd $(srcdir) && $(AUTOMAKE) --gnu \ -#>- && exit 0; \ -#>- exit 1;; \ -#>- esac; \ -#>- done; \ -#>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ -#>- cd $(top_srcdir) && \ -#>- $(AUTOMAKE) --gnu Makefile -#>+ 14 - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ - ( \ - cd $(srcdir) && $(AUTOMAKE) --gnu \ - ) || exit 1; echo ' cd $(top_srcdir) && perl admin/am_edit '; cd $(top_srcdir) && perl admin/am_edit && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile - cd $(top_srcdir) && perl admin/am_edit Makefile.in -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) -#>- cd $(srcdir) && $(AUTOCONF) -#>+ 2 - cd $(srcdir) && rm -f configure - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -uninstall-info-am: - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - mkdir $(distdir) - $(mkdir_p) $(distdir)/admin - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(mkdir_p) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -#>- clean: clean-recursive -#>+ 1 -clean: kde-rpo-clean clean-recursive - -#>- clean-am: clean-generic clean-libtool mostlyclean-am -#>+ 1 -clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: - -install-exec-am: - -install-info: install-info-recursive - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-info-am - -uninstall-info: uninstall-info-recursive - -.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ - check-am clean clean-generic clean-libtool clean-recursive \ - ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ - dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \ - distclean-generic distclean-hdr distclean-libtool \ - distclean-recursive distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - maintainer-clean-recursive mostlyclean mostlyclean-generic \ - mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am uninstall-info-am - - -$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ; - -$(top_srcdir)/subdirs: - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs - -$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in - @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4 - -package-messages: - cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common package-messages - $(MAKE) -C po merge - -dist-hook: - cd $(top_distdir) && perl admin/am_edit -padmin - cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - -#>+ 2 -KDE_DIST=stamp-h.in app.kdevses subdirs Makefile.in configure.files config.h.in app.kdevelop configure.in Makefile.cvs aclocal.m4 Doxyfile app.kdevelop.pcs acinclude.m4 configure Makefile.am - -#>+ 2 -docs-am: - -#>+ 7 -force-reedit: - \ - cd $(srcdir) && $(AUTOMAKE) --gnu \ - - cd $(top_srcdir) && perl admin/am_edit Makefile.in - - -#>+ 21 -clean-bcheck: - rm -f *.bchecktest.cc *.bchecktest.cc.class a.out - -bcheck: bcheck-recursive - -bcheck-am: - @for i in ; do \ - if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \ - echo "int main() {return 0;}" > $$i.bchecktest.cc ; \ - echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \ - echo "$$i"; \ - if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then \ - rm -f $$i.bchecktest.cc; exit 1; \ - fi ; \ - echo "" >> $$i.bchecktest.cc.class; \ - perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \ - rm -f a.out; \ - fi ; \ - done - - -#>+ 3 -final: - $(MAKE) all-am - -#>+ 3 -final-install: - $(MAKE) install-am - -#>+ 3 -no-final: - $(MAKE) all-am - -#>+ 3 -no-final-install: - $(MAKE) install-am - -#>+ 3 -kde-rpo-clean: - -rm -f *.rpo - -#>+ 3 -nmcheck: -nmcheck-am: nmcheck diff --git a/NEWS b/NEWS deleted file mode 100644 index e69de29..0000000 diff --git a/README~ b/README~ deleted file mode 100644 index d35cae5..0000000 --- a/README~ +++ /dev/null @@ -1,6 +0,0 @@ -The appinfo:/ KIO slave combines an application's configuration, data, manual and -temp files and folders into a single view. - -This version is a prototype (i.e. the result of two evenings' work). If you think -it's a good idea let me know and I can work on improving it. I also welcome -feature suggestions and any other feedback. \ No newline at end of file diff --git a/TODO b/TODO deleted file mode 100644 index f5ee550..0000000 --- a/TODO +++ /dev/null @@ -1,60 +0,0 @@ -app executable -man pages -known/found config files (eg kde rc files, /etc/, /usr/local/etc) -folders in home dir? - -later: -if app is running, known network connections? -files referenced in man pages - -use desktop files where possible -create and cache desktop files? - -for kde apps: - -apps - Applications menu (.desktop files). -config - Configuration files. -data - Where applications store data. -exe - Executables in $prefix/bin. findExe() for a function that takes $PATH into account. -mime - Mime types. -tmp - Temporary files (specific for both current host and current user) -socket - UNIX Sockets (specific for both current host and current user) - -use - -#include -#include - - KService::Ptr service = KService::serviceByDesktopName( url.fileName() ); - if (service && service->isValid()) { -// KURL newUrl; -// newUrl.setPath(locate("apps", service->desktopEntryPath())); -// createFileEntry(entry, service->name(), newUrl, "application/x-desktop", service->icon()); - - createFileEntry(entry, service->name(), url.url(1)+service->desktopEntryName(), - "application/x-desktop", service->icon(), locate("apps", service->desktopEntryPath()) ); - - - -overlay: - - // Not using KIconEffect::overlay as that requires the same size - // for the icon and the overlay, also the overlay definately doesn't - // have a more that one-bit alpha channel here - QPixmap overlay( locate ( "icon", KMimeType::favIconForURL( m_filterData->uri() ) + ".png" ) ); - if ( !overlay.isNull() ) - { - int x = icon.width() - overlay.width(); - int y = icon.height() - overlay.height(); - if ( icon.mask() ) - { - QBitmap mask = *icon.mask(); - bitBlt( &mask, x, y, - overlay.mask() ? const_cast(overlay.mask()) : &overlay, - 0, 0, overlay.width(), overlay.height(), - overlay.mask() ? OrROP : SetROP ); - icon.setMask(mask); - } - bitBlt( &icon, x, y, &overlay ); - } - diff --git a/TODO~ b/TODO~ deleted file mode 100644 index 2da7365..0000000 --- a/TODO~ +++ /dev/null @@ -1,35 +0,0 @@ -app executable -man pages -known/found config files (eg kde rc files, /etc/, /usr/local/etc) -folders in home dir? - -later: -if app is running, known network connections? -files referenced in man pages - -use desktop files where possible -create and cache desktop files? - -for kde apps: - -apps - Applications menu (.desktop files). -config - Configuration files. -data - Where applications store data. -exe - Executables in $prefix/bin. findExe() for a function that takes $PATH into account. -mime - Mime types. -tmp - Temporary files (specific for both current host and current user) -socket - UNIX Sockets (specific for both current host and current user) - -use - -#include -#include - - KService::Ptr service = KService::serviceByDesktopName( url.fileName() ); - if (service && service->isValid()) { -// KURL newUrl; -// newUrl.setPath(locate("apps", service->desktopEntryPath())); -// createFileEntry(entry, service->name(), newUrl, "application/x-desktop", service->icon()); - - createFileEntry(entry, service->name(), url.url(1)+service->desktopEntryName(), - "application/x-desktop", service->icon(), locate("apps", service->desktopEntryPath()) ); diff --git a/acinclude.m4 b/acinclude.m4 deleted file mode 100644 index a0ff256..0000000 --- a/acinclude.m4 +++ /dev/null @@ -1,11863 +0,0 @@ -## -*- autoconf -*- - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -dnl Boston, MA 02110-1301, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for kdelibs -dnl and kdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN([KDE_PATH_X_DIRECT], -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK([#include ], [${x_direct_test_function}(1)], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ - /usr/X11/lib${kdelibsuff} \ - /usr/X11R6/lib${kdelibsuff} \ - /usr/X11R5/lib${kdelibsuff} \ - /usr/X11R4/lib${kdelibsuff} \ - \ - /usr/lib${kdelibsuff}/X11 \ - /usr/lib${kdelibsuff}/X11R6 \ - /usr/lib${kdelibsuff}/X11R5 \ - /usr/lib${kdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${kdelibsuff} \ - /usr/local/X11R6/lib${kdelibsuff} \ - /usr/local/X11R5/lib${kdelibsuff} \ - /usr/local/X11R4/lib${kdelibsuff} \ - \ - /usr/local/lib${kdelibsuff}/X11 \ - /usr/local/lib${kdelibsuff}/X11R6 \ - /usr/local/lib${kdelibsuff}/X11R5 \ - /usr/local/lib${kdelibsuff}/X11R4 \ - \ - /usr/X386/lib${kdelibsuff} \ - /usr/x386/lib${kdelibsuff} \ - /usr/XFree86/lib${kdelibsuff}/X11 \ - \ - /usr/lib${kdelibsuff} \ - /usr/local/lib${kdelibsuff} \ - /usr/unsupported/lib${kdelibsuff} \ - /usr/athena/lib${kdelibsuff} \ - /usr/local/x11r5/lib${kdelibsuff} \ - /usr/lpp/Xamples/lib${kdelibsuff} \ - /lib/usr/lib${kdelibsuff}/X11 \ - \ - /usr/openwin/lib${kdelibsuff} \ - /usr/openwin/share/lib${kdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_FIND_FILE], -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, -dnl if-not-found, test-parameter, prepend-path) -dnl -dnl Look for program-name in list-of-dirs+$PATH. -dnl If prepend-path is set, look in $PATH+list-of-dirs instead. -dnl If found, $variable-name is set. If not, if-not-found is evaluated. -dnl test-parameter: if set, the program is executed with this arg, -dnl and only a successful exit code is required. -AC_DEFUN([KDE_FIND_PATH], -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - dirs="" - for dir in $PATH; do - dirs="$dirs $dir" - done - if test -z "$6"; then dnl Append dirs in PATH (default) - dirs="$3 $dirs" - else dnl Prepend dirs in PATH (if 6th arg is set) - dirs="$dirs $3" - fi - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN([KDE_MOC_ERROR_MESSAGE], -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN([KDE_UIC_ERROR_MESSAGE], -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN([KDE_CHECK_UIC_FLAG], -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $QTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_QT_MOC_UIC], -[ - AC_REQUIRE([KDE_CHECK_PERL]) - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - else - UIC=$UIC_PATH - - if test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN([KDE_1_CHECK_PATHS], -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and kdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `KDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN([KDE_SET_PATHS], -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_kcfgdir=\"$kde_kcfgdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_menudir=\"$xdg_menudir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN([KDE_SET_DEFAULT_PATHS], -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${datadir}/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${datadir}/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${datadir}/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${datadir}/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${datadir}/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${datadir}/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${datadir}/config' - fi - if test -z "$kde_kcfgdir"; then - kde_kcfgdir='\${datadir}/config.kcfg' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${datadir}/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${datadir}/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${datadir}/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${datadir}/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${datadir}/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${datadir}/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications/kde' - fi - if test -z "$xdg_menudir"; then - xdg_menudir='\${sysconfdir}/xdg/menus' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_kcfgdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN([KDE_MISSING_PROG_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN([KDE_MISSING_ARTS_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly or use ---without-arts to compile without aRts support (this will remove functionality). -]) -]) - -AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], -[ - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" - if test -n "$KDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $KDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi -]) - -AC_DEFUN([KDE_SUBST_PROGRAMS], -[ - AC_ARG_WITH(arts, - AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") - if test "$build_arts" = "no"; then - AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) - fi - - KDE_SET_DEFAULT_BINDIRS - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" '!=' "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - kde32ornewer=1 - kde33ornewer=1 - if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then - kde32ornewer= - kde33ornewer= - else - if test "$kde_qtver" = "3"; then - if test "$kde_qtsubver" -le 1; then - kde32ornewer= - fi - if test "$kde_qtsubver" -le 2; then - kde33ornewer= - fi - if test "$KDECONFIG" != "compiled"; then - if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then - kde33ornewer= - fi - fi - fi - fi - - if test -n "$kde32ornewer"; then - KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) - KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) - fi - if test -n "$kde33ornewer"; then - KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) - AC_SUBST(MAKEKDEWIDGETS) - fi - KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) - - if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - if test -n "$kde32ornewer"; then - KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' - DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' - AC_SUBST(KCONFIG_COMPILER) - AC_SUBST(KCFG_DEPENDENCIES) - AC_SUBST(DCOPIDLNG) - fi - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - AC_SUBST(XMLLINT) -])dnl - -AC_DEFUN([AC_CREATE_KFSSTND], -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_menudir= xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN([AC_SUBST_KFSSTND], -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_kcfgdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_menudir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(kdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN([KDE_MISC_TESTS], -[ - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # sys/bitypes.h is needed for uint32_t and friends on Tru64 - AC_CHECK_HEADERS(sys/bitypes.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # for some image handling on Mac OS X - AC_CHECK_HEADERS(Carbon/Carbon.h) - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - KDE_CHECK_PIE_SUPPORT - -# darwin needs this to initialize the environment -AC_CHECK_HEADERS(crt_externs.h) -AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - -AH_VERBATIM(_DARWIN_ENVIRON, -[ -#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) -# include -# include -# define environ (*_NSGetEnviron()) -#endif -]) - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([K_PATH_X], -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -AC_ARG_ENABLE( - mac, - AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), - kde_use_qt_mac=$enableval, - kde_use_qt_mac=no -) - -# used to disable x11-specific stuff on special platforms -AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") - -if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then - -AC_MSG_CHECKING(for X) - -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${kdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -LDFLAGS="$ac_save_LDFLAGS" - -LIB_X11='-lX11 $(LIBSOCKET)' - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no -) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe -]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -elif test "$kde_use_qt_emb" = "yes"; then - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -elif test "$kde_use_qt_mac" = "yes"; then - dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to - dnl be included to get the information) --Sam - CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" - CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -fi -AC_SUBST(X_PRE_LIBS) -AC_SUBST(LIB_X11) -AC_SUBST(LIB_XRENDER) -AC_SUBST(LIBSM) -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_includes) -AC_SUBST(x_libraries) -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - -]) - -AC_DEFUN([KDE_PRINT_QT_PROGRAM], -[ -AC_REQUIRE([KDE_USE_QT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) -dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_QT_1_3], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_QT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-qt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ -if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" -else - qtlib="qt" -fi - -kde_int_qt="-l$qtlib" - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-qt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBQT="$LIBQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" -AC_ARG_WITH(qt-dir, - AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), - [ ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${kdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), - [ - ac_qt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=qstyle.h -else - kde_qt_header=qglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIBQT="$LIBQT ${kde_int_qt}_incremental" - break - fi -done - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then - KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(qt_includes) - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$QT_LDFLAGS $all_libraries" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(QT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_QT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIB_QT="$LIB_QT ${kde_int_qt}_incremental" - break - fi -done - -AC_SUBST(LIB_QT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN([AC_PATH_QT], -[ -AC_PATH_QT_1_3 -]) - -AC_DEFUN([KDE_CHECK_UIC_PLUGINS], -[ -AC_REQUIRE([AC_PATH_QT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - # if you're trying to debug this check and think it's incorrect, - # better check your installation. The check _is_ correct - your - # installation is not. - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([ -you need to install kdelibs first. - -If you did install kdelibs, then the Qt version that is picked up by -this configure is not the same version you used to compile kdelibs. -The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the -_same Qt version_, compiled with the _same compiler_ and the same Qt -configuration settings. -]) -fi -fi -]) - -AC_DEFUN([KDE_CHECK_FINAL], -[ - AC_ARG_ENABLE(final, - AC_HELP_STRING([--enable-final], - [build size optimized apps (experimental - needs lots of memory)]), - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN([KDE_CHECK_CLOSURE], -[ - AC_ARG_ENABLE(closure, - AC_HELP_STRING([--enable-closure],[delay template instantiation]), - kde_use_closure=$enableval, kde_use_closure=no) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_NO_UNDEFINED="" - case $host in - *-*-linux-gnu) - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - ;; - esac - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -dnl Check if the linker supports --enable-new-dtags and --as-needed -AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], -[ - AC_ARG_ENABLE(new_ldflags, - AC_HELP_STRING([--enable-new-ldflags], - [enable the new linker flags]), - kde_use_new_ldflags=$enableval, - kde_use_new_ldflags=no) - - LDFLAGS_AS_NEEDED="" - LDFLAGS_NEW_DTAGS="" - if test "x$kde_use_new_ldflags" = "xyes"; then - LDFLAGS_NEW_DTAGS="" - KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], - [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) - - KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], - [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) - fi - AC_SUBST(LDFLAGS_AS_NEEDED) - AC_SUBST(LDFLAGS_NEW_DTAGS) -]) - -AC_DEFUN([KDE_CHECK_NMCHECK], -[ - AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - -AC_DEFUN([KDE_EXPAND_MAKEVAR], [ -savex=$exec_prefix -test "x$exec_prefix" = xNONE && exec_prefix=$prefix -tmp=$$2 -while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done -exec_prefix=$savex -]) - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_BASE_PATH_KDE], -[ -AC_REQUIRE([KDE_CHECK_STL]) -AC_REQUIRE([AC_PATH_QT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${includedir} - KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) - - kde_libraries=${libdir} - KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) - -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libkdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libkio.la" -fi - -if test -z "$1"; then - -kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" -test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by kdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1, e.g. from kdelibs - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes="${includedir}" - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$KDE_LDFLAGS $all_libraries" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN([KDE_CHECK_EXTRA_LIBS], -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - KApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_menudir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - CPPFLAGS="$all_includes $CPPFLAGS" - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_CHECK_KDEQTADDON], -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdeqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdeqtaddon=yes, - kde_cv_have_kdeqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdeqtaddon) - -if test "$kde_cv_have_kdeqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN([KDE_CREATE_LIBS_ALIASES], -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - case $host in - *cygwin*) lib_kded="-lkdeinit_kded" ;; - *) lib_kded="" ;; - esac - AC_SUBST(LIB_KDED, $lib_kded) - AC_SUBST(LIB_KDECORE, "-lkdecore") - AC_SUBST(LIB_KDEUI, "-lkdeui") - AC_SUBST(LIB_KIO, "-lkio") - AC_SUBST(LIB_KJS, "-lkjs") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-lkabc") - AC_SUBST(LIB_KHTML, "-lkhtml") - AC_SUBST(LIB_KSPELL, "-lkspell") - AC_SUBST(LIB_KPARTS, "-lkparts") - AC_SUBST(LIB_KDEPRINT, "-lkdeprint") - AC_SUBST(LIB_KUTILS, "-lkutils") - AC_SUBST(LIB_KDEPIM, "-lkdepim") - AC_SUBST(LIB_KIMPROXY, "-lkimproxy") - AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") - AC_SUBST(LIB_KDNSSD, "-lkdnssd") - AC_SUBST(LIB_KUNITTEST, "-lkunittest") -# these are for backward compatibility - AC_SUBST(LIB_KSYCOCA, "-lkio") - AC_SUBST(LIB_KFILE, "-lkio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_KDECORE, "-lkdecore") - AC_SUBST(LIB_KDEUI, "-lkdeui") - AC_SUBST(LIB_KIO, "-lkio") - AC_SUBST(LIB_KSYCOCA, "-lksycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-lkfile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KHTML, "-lkhtml") - AC_SUBST(LIB_KSPELL, "-lkspell") - AC_SUBST(LIB_KPARTS, "-lkparts") - AC_SUBST(LIB_KDEPRINT, "-lkdeprint") -else - AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") - AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") - AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") -fi -]) - -AC_DEFUN([AC_PATH_KDE], -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN([KDE_CHECK_FUNC_EXT], -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libkdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" { -#endif -$4; -#ifdef __cplusplus -} -#endif -#endif -]) -]) - -AC_DEFUN([AC_CHECK_SETENV], -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN([AC_CHECK_UNSETENV], -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN([AC_CHECK_GETDOMAINNAME], -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [#include - int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN([AC_CHECK_GETHOSTNAME], -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN([AC_CHECK_USLEEP], -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN([AC_CHECK_RANDOM], -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN([AC_CHECK_INITGROUPS], -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMPS], -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMP], -[ - KDE_CHECK_FUNC_EXT(mkstemp, [ -#include -#include -], - [ -mkstemp("/tmp/aaaXXXXXX"); -], - [int mkstemp(char *)], - [MKSTEMP]) -]) - -AC_DEFUN([AC_CHECK_MKDTEMP], -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN([AC_CHECK_RES_INIT], -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - KDE_CHECK_FUNC_EXT(res_init, - [ -#include -#include -#include -#include - ], - [res_init()], - [int res_init(void)], - [RES_INIT]) -]) - -AC_DEFUN([AC_CHECK_STRLCPY], -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN([AC_CHECK_STRLCAT], -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN([AC_CHECK_RES_QUERY], -[ - KDE_CHECK_FUNC_EXT(res_query, [ -#include -#include -#include -#include -#include -], -[ -res_query(NULL, 0, 0, NULL, 0); -], - [int res_query(const char *, int, int, unsigned char *, int)], - [RES_QUERY]) -]) - -AC_DEFUN([AC_CHECK_DN_SKIPNAME], -[ - KDE_CHECK_FUNC_EXT(dn_skipname, [ -#include -#include -#include -#include -], -[ -dn_skipname (NULL, NULL); -], - [int dn_skipname (unsigned char *, unsigned char *)], - [DN_SKIPNAME]) -]) - - -AC_DEFUN([AC_FIND_GIF], - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) -fi -]) - -AC_DEFUN([KDE_FIND_JPEG_HELPER], -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[ -#ifdef __cplusplus -extern "C" { -#endif -void jpeg_CreateDecompress(); -#ifdef __cplusplus -} -#endif -], -[jpeg_CreateDecompress();], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN([AC_FIND_JPEG], -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in khtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN([KDE_CHECK_QT_JPEG], -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN([AC_FIND_ZLIB], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN([KDE_TRY_TIFFLIB], -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN([AC_FIND_TIFF], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - -AC_DEFUN([KDE_FIND_LIBEXR], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_CACHE_VAL(ac_cv_libexr, -[ - if test -z "$PKG_CONFIG"; then - AC_PATH_PROG(PKG_CONFIG, pkg-config, no) - fi - - AC_MSG_CHECKING([for OpenEXR libraries]) - - if test "$PKG_CONFIG" = "no" ; then - AC_MSG_RESULT(no) - echo "*** The pkg-config script could not be found. Make sure it is" - echo "*** in your path, or set the PKG_CONFIG environment variable" - echo "*** to the full path to pkg-config." - echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." - else - if !(`$PKG_CONFIG --exists OpenEXR`) ; then - AC_MSG_RESULT(no) - EXRSTATUS=no - else - if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then - AC_MSG_RESULT(no) - EXRSTATUS=old - else - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_CXXFLAGS="$CXXFLAGS" - EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` - CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" - - AC_TRY_LINK(dnl - [ - #include - ], - [ - using namespace Imf; - RgbaInputFile file ("dummy"); - return 0; - ], - eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", - eval "ac_cv_libexr=no" - ) - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) - LIB_EXR="$ac_cv_libexr" - AC_MSG_RESULT($ac_cv_libexr) - else - AC_MSG_RESULT(no) - LIB_EXR="" - fi - fi - fi - fi - AC_SUBST(LIB_EXR) - AC_SUBST(EXR_FLAGS) -]) - - - -AC_DEFUN([AC_FIND_PNG], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN([AC_FIND_JASPER], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN([AC_CHECK_BOOL], -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], -[ -AC_MSG_CHECKING(if you need GNU extensions) -AC_CACHE_VAL(ac_cv_gnu_extensions, -[ -cat > conftest.c << EOF -#include - -#ifdef __GNU_LIBRARY__ -yes -#endif -EOF - -if (eval "$ac_cpp conftest.c") 2>&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_gnu_extensions=yes -else - ac_cv_gnu_extensions=no -fi -]) - -AC_MSG_RESULT($ac_cv_gnu_extensions) -if test "$ac_cv_gnu_extensions" = "yes"; then - AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) -fi -]) - -AC_DEFUN([KDE_CHECK_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CC supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_C - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) - CFLAGS="$save_CFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN([AC_REMOVE_FORBIDDEN], -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - - -AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], -[ - AC_MSG_CHECKING([whether $CC is blacklisted]) - - dnl In theory we have tu run this test against $CC and $CXX - dnl in C and in C++ mode, because its perfectly legal for - dnl the user to mix compiler versions, since C has a defined - dnl ABI. - dnl - dnl For now, we assume the user is not on crack. - - AC_TRY_COMPILE([ -#ifdef __GNUC__ -#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 -choke me -#endif -#endif -], , - kde_bad_compiler=no, - kde_bad_compiler=yes -) - - AC_MSG_RESULT($kde_bad_compiler) - -if test "$kde_bad_compiler" = "yes"; then - AC_MSG_ERROR([ - -This particular compiler version is blacklisted because it -is known to miscompile KDE. Please use a newer version, or -if that is not yet available, choose an older version. - -Please do not report a bug or bother us reporting this -configure error. We know about it, and we introduced -it by intention to avoid untraceable bugs or crashes in KDE. - -]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], -[ - AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], - kde_cv_opt_noinline_match, - [ - kde_cv_opt_noinline_match=irrelevant - dnl if we don't use both -O2 and -fno-inline, this check is moot - if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ - && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then - - ac_cflags_save="$CFLAGS" - CFLAGS="$CFLAGS -D_USE_GNU" - - AC_TRY_LINK([ - #include -], [ const char *pt, *et; - et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; -], - kde_cv_opt_noinline_match=yes, - kde_cv_opt_noinline_match=no - ) - - CFLAGS="$ac_cflags_save" - fi - ]) -]) - - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN([AC_VALIDIFY_CXXFLAGS], -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN([AC_CHECK_COMPILERS], -[ - AC_ARG_ENABLE(debug, - AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption, - AC_HELP_STRING([--disable-debug], - [disables debug output and debug symbols [default=no]]), - [],[]) - - AC_ARG_ENABLE(strict, - AC_HELP_STRING([--enable-strict], - [compiles with strict compiler options (may not work!)]), - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 -fno-inline $CFLAGS" - else - CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - KDE_CHECK_FOR_BAD_COMPILER - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 -fno-inline $CXXFLAGS" - else - CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" - case $host in - *-*-linux-gnu) - CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) - KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - dnl ### FIXME: revert for KDE 4 - KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - AC_ARG_ENABLE(pch, - AC_HELP_STRING([--enable-pch], - [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), - [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) - - HAVE_GCC_VISIBILITY=0 - AC_SUBST([HAVE_GCC_VISIBILITY]) - - if test "$GXX" = "yes"; then - gcc_no_reorder_blocks=NO - KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) - if test $kde_use_debug_code != "no" && \ - test $kde_use_debug_code != "full" && \ - test "YES" = "$gcc_no_reorder_blocks" ; then - CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" - CFLAGS="$CFLAGS -fno-reorder-blocks" - fi - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - ENABLE_PERMISSIVE_FLAG="-fpermissive" - - if test "$kde_use_pch" = "yes"; then - AC_MSG_CHECKING(whether gcc supports precompiling c header files) - echo >conftest.h - if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then - kde_gcc_supports_pch=yes - AC_MSG_RESULT(yes) - else - kde_gcc_supports_pch=no - AC_MSG_RESULT(no) - fi - if test "$kde_gcc_supports_pch" = "yes"; then - AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) - if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then - kde_gcc_supports_pch=yes - AC_MSG_RESULT(yes) - else - kde_gcc_supports_pch=no - AC_MSG_RESULT(no) - fi - fi - rm -f conftest.h conftest.h.gch - fi - - KDE_CHECK_FOR_OPT_NOINLINE_MATCH - if test "x$kde_cv_opt_noinline_match" = "xno" ; then - CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" - fi - fi - AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_ARG_ENABLE(coverage, - AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ - if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then - ac_coverage_compiler="-fprofile-arcs -ftest-coverage" - ac_coverage_linker="-lgcc" - elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then - ac_coverage_compiler="-fprofile-arcs -ftest-coverage" - ac_coverage_linker="" - else - AC_MSG_ERROR([coverage with your compiler is not supported]) - fi - CFLAGS="$CFLAGS $ac_coverage_compiler" - CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" - LDFLAGS="$LDFLAGS $ac_coverage_linker" - ]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - AC_SUBST(ENABLE_PERMISSIVE_FLAG) - - KDE_CHECK_NEW_LDFLAGS - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], - [ - AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - safe_CXXFLAGS=$CXXFLAGS - safe_LDFLAGS=$LDFLAGS - CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" - LDFLAGS="$LDFLAGS -shared -fPIC" - - AC_TRY_LINK( - [ - /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ - #include - int some_function( void ) __attribute__ ((visibility("default"))); - int some_function( void ) - { - std::string s("blafasel"); - return 0; - } - ], [/* elvis is alive */], - kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) - - CXXFLAGS=$safe_CXXFLAGS - LDFLAGS=$safe_LDFLAGS - AC_LANG_RESTORE - ] - ) - - if test x$kde_cv_val_gcc_visibility_bug = xno; then - CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" - fi - ] -) - -AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], -[ - AC_BEFORE([AC_PATH_QT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) - - AC_MSG_CHECKING([grepping for visibility push/pop in headers]) - - if test "x$GXX" = "xyes"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_EGREP_CPP( - [GCC visibility push], - [ #include - ], - [ - AC_MSG_RESULT(yes) - kde_stdc_visibility_patched=yes ], - [ - AC_MSG_RESULT(no) - AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for - visibility support. Disabling -fvisibility=hidden]) - - kde_stdc_visibility_patched=no ]) - - AC_LANG_RESTORE - - kde_have_gcc_visibility=no - KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, - [ - kde_have_gcc_visibility=yes - dnl the whole toolchain is just a mess, gcc is just too buggy - dnl to handle STL with visibility enabled. Lets reconsider - dnl when gcc 4.2 is out or when things get fixed in the compiler. - dnl Contact mueller@kde.org for details. - AC_ARG_ENABLE(gcc-hidden-visibility, - AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), - [kde_have_gcc_visibility=$enableval], - [kde_have_gcc_visibility=no]) - - AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - safe_CXXFLAGS=$CXXFLAGS - CXXFLAGS="$CXXFLAGS $all_includes" - - AC_TRY_COMPILE( - [ -#include -#if Q_EXPORT - 0 != 0 -/* if this compiles, then Q_EXPORT is undefined */ -/* if Q_EXPORT is nonempty, this will break compilation */ -#endif - ], [/* elvis is alive */], - kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) - - CXXFLAGS=$safe_CXXFLAGS - AC_LANG_RESTORE - ] - ) - - if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then - CXXFLAGS="$CXXFLAGS -fvisibility=hidden" - KDE_CHECK_VISIBILITY_GCC_BUG - HAVE_GCC_VISIBILITY=1 - AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) - fi - ]) - fi -]) - -AC_DEFUN([KDE_ADD_DEPENDENCIES], -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN([KDE_PROG_LIBTOOL], -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_OBJEXT -AC_EXEEXT - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. -KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" -AC_SUBST(KDE_CHECK_PLUGIN) - -# we patch configure quite some so we better keep that consistent for incremental runs -AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') -]) - -AC_DEFUN([KDE_CHECK_LIB64], -[ - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none,auto[=default])]), - kdelibsuff=$enableval, kdelibsuff="auto") - - if test "$kdelibsuff" = "auto"; then - -cat > conftest.c << EOF -#include -int main() { - return 0; -} -EOF - kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ - s,.*/lib\([[^\/]]*\)/.*,\1, - p -}'` - rm -rf conftest.* - fi - - if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then - kdelibsuff= - fi - if test -z "$kdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${kdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) - fi -]) - -AC_DEFUN([KDE_CHECK_TYPES], -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(short)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -dnl Not used - kept for compat only? -AC_DEFUN([KDE_DO_IT_ALL], -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN([AC_CHECK_RPATH], -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(libdir)" - - if test "$kde_libraries" != "$libdir"; then - KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" - fi - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN([AC_CHECK_SOCKLEN_T], -[ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(kde_cv_socklen_t, - [ - AC_LANG_PUSH(C++) - kde_cv_socklen_t=no - AC_TRY_COMPILE([ - #include - #include - ], - [ - socklen_t len; - getpeername(0,0,&len); - ], - [ - kde_cv_socklen_t=yes - kde_cv_socklen_t_equiv=socklen_t - ]) - AC_LANG_POP(C++) - ]) - AC_MSG_RESULT($kde_cv_socklen_t) - if test $kde_cv_socklen_t = no; then - AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) - AC_CACHE_VAL(kde_cv_socklen_t_equiv, - [ - kde_cv_socklen_t_equiv=int - AC_LANG_PUSH(C++) - for t in int size_t unsigned long "unsigned long"; do - AC_TRY_COMPILE([ - #include - #include - ], - [ - $t len; - getpeername(0,0,&len); - ], - [ - kde_cv_socklen_t_equiv="$t" - break - ]) - done - AC_LANG_POP(C++) - ]) - AC_MSG_RESULT($kde_cv_socklen_t_equiv) - fi - AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, - [type to use in place of socklen_t if not defined]) - AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, - [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN([AM_KDE_WITH_NLS], - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN([AM_LC_MESSAGES], - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN([AM_KDE_GNU_GETTEXT], - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN([AC_HAVE_XPM], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN([AC_HAVE_DPMS], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" - LIBS="-lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LIBS="-lXdpms $LIBS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - ac_save_cflags="$CFLAGS" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, - [Define if you have the DPMSCapable prototype in ]) - AC_CHECK_DECL(DPMSCapable, - AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, - [#include - #include ]) - AH_TEMPLATE(HAVE_DPMSINFO_PROTO, - [Define if you have the DPMSInfo prototype in ]) - AC_CHECK_DECL(DPMSInfo, - AC_DEFINE(HAVE_DPMSINFO_PROTO),, - [#include - #include ]) - CFLAGS="$ac_save_cflags" - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN([AC_HAVE_GL], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags=$LDFLAGS - ac_save_cxxflags=$CXXFLAGS - ac_save_libs=$LIBS - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" - LIBS="$LIBS -lGL -lGLU" - test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" - LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - AC_LANG_RESTORE - LDFLAGS=$ac_save_ldflags - CXXFLAGS=$ac_save_cxxflags - LIBS=$ac_save_libs - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - GLLIB='-lGLU -lGL $(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN([KDE_PAM], [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - want_pam= - AC_ARG_WITH(pam, - AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), - [ if test "x$withval" = "xyes"; then - want_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - want_pam=no - else - want_pam=yes - pam_service=$withval - fi - ], [ pam_service=kde ]) - - use_pam= - PAMLIBS= - if test "x$want_pam" != xno; then - AC_CHECK_LIB(pam, pam_start, [ - AC_CHECK_HEADER(security/pam_appl.h, - [ pam_header=security/pam_appl.h ], - [ AC_CHECK_HEADER(pam/pam_appl.h, - [ pam_header=pam/pam_appl.h ], - [ - AC_MSG_WARN([PAM detected, but no headers found! -Make sure you have the necessary development packages installed.]) - ] - ) - ] - ) - ], , $LIBDL) - if test -z "$pam_header"; then - if test "x$want_pam" = xyes; then - AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) - fi - else - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - use_pam=yes - - dnl darwin claims to be something special - if test "$pam_header" = "pam/pam_appl.h"; then - AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) - fi - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], $pam_header, - [ AC_EGREP_HEADER([const struct pam_message], $pam_header, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN([DEF_PAM_SERVICE], [ - AC_ARG_WITH($1-pam, - AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE=$withval - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN([KDE_SHADOWPASSWD], [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - AC_HELP_STRING([--with-shadow],[If you want shadow password support]), - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN([KDE_PASSWDLIBS], [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN([KDE_CHECK_LIBDL], -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN([KDE_CHECK_DLOPEN], -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN([KDE_ADD_INCLUDES], -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - -AC_DEFUN([KDE_CHECK_LIBPTHREAD], -[ - dnl This code is here specifically to handle the - dnl various flavors of threading library on FreeBSD - dnl 4-, 5-, and 6-, and the (weird) rules around it. - dnl There may be an environment PTHREAD_LIBS that - dnl specifies what to use; otherwise, search for it. - dnl -pthread is special cased and unsets LIBPTHREAD - dnl below if found. - LIBPTHREAD="" - - if test -n "$PTHREAD_LIBS"; then - if test "x$PTHREAD_LIBS" = "x-pthread" ; then - LIBPTHREAD="PTHREAD" - else - PTHREAD_LIBS_save="$PTHREAD_LIBS" - PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` - AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) - KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ - LIBPTHREAD="$PTHREAD_LIBS_save"]) - PTHREAD_LIBS="$PTHREAD_LIBS_save" - fi - fi - - dnl Is this test really needed, in the face of the Tru64 test below? - if test -z "$LIBPTHREAD"; then - AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) - fi - - dnl This is a special Tru64 check, see BR 76171 issue #18. - if test -z "$LIBPTHREAD" ; then - AC_MSG_CHECKING([for pthread_create in -lpthread]) - kde_safe_libs=$LIBS - LIBS="$LIBS -lpthread" - AC_TRY_LINK([#include ],[(void)pthread_create(0,0,0,0);],[ - AC_MSG_RESULT(yes) - LIBPTHREAD="-lpthread"],[ - AC_MSG_RESULT(no)]) - LIBS=$kde_safe_libs - fi - - dnl Un-special-case for FreeBSD. - if test "x$LIBPTHREAD" = "xPTHREAD" ; then - LIBPTHREAD="" - fi - - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], -[ - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_THREADING], -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN([KDE_TRY_LINK_PYTHON], -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi - -fi - -]) - -AC_DEFUN([KDE_CHECK_PYTHON_DIR], -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN([KDE_CHECK_PYTHON_INTERN], -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" -AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.so; then - AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) - if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_PYTHON], -[ - KDE_CHECK_PYTHON_INTERN("2.5", - [KDE_CHECK_PYTHON_INTERN("2.4", - [KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_STL], -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - - AC_MSG_CHECKING([if C++ programs can be compiled]) - AC_CACHE_VAL(kde_cv_stl_works, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_works=yes, - kde_cv_stl_works=no) -]) - - AC_MSG_RESULT($kde_cv_stl_works) - - if test "$kde_cv_stl_works" = "yes"; then - # back compatible - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - else - AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. -Check config.log for details - if you're using a Linux distribution you might miss -a package named similar to libstdc++-dev.]) - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN([AC_FIND_QIMGIO], - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN([AM_DISABLE_LIBRARIES], -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN([AC_CHECK_UTMP_FILE], -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN([KDE_CREATE_SUBDIRSLIST], -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" -TOPSUBDIRS="" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -ac_topsubdirs= -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -elif test -s $srcdir/subdirs; then - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.@]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN([KDE_CHECK_NAMESPACES], -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_S_ISSOCK], -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN([KDE_CHECK_HEADER], -[ - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER([$1], [$2], [$3], [$4]) - AC_LANG_RESTORE - CPPFLAGS=$kde_safe_cppflags -]) - -AC_DEFUN([KDE_CHECK_HEADERS], -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_FAST_CONFIGURE], -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN([KDE_CONF_FILES], -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -dnl This sets the prefix, for arts and kdelibs -dnl Do NOT use in any other module. -dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde -AC_DEFUN([KDE_SET_PREFIX_CORE], -[ - unset CDPATH - dnl make $KDEDIR the default for the installation - AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - - -AC_DEFUN([KDE_SET_PREFIX], -[ - unset CDPATH - dnl We can't give real code to that macro, only a value. - dnl It only matters for --help, since we set the prefix in this function anyway. - AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) - - KDE_SET_DEFAULT_BINDIRS - if test "x$prefix" = "xNONE"; then - dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it - KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) - else - dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH - kde_save_PATH="$PATH" - PATH="$exec_prefix/bin:$prefix/bin:$PATH" - KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) - PATH="$kde_save_PATH" - fi - - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile kdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - - AC_MSG_CHECKING([where to install]) - if test "x$prefix" = "xNONE"; then - prefix=$kde_libs_prefix - AC_MSG_RESULT([$prefix (as returned by kde-config)]) - else - dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different - given_prefix=$prefix - AC_MSG_RESULT([$prefix (as requested)]) - fi - - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - AC_SUBST(KDECONFIG) - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) - - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN([KDE_LANG_CPLUSPLUS], -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -KDE_LANG_CPLUSPLUS -]) - -AC_DEFUN([KDE_CHECK_LONG_LONG], -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN([KDE_CHECK_LIB], -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN([KDE_JAVA_PREFIX], -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN([KDE_CHECK_JAVA_DIR], -[ - -AC_ARG_WITH(java, -AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libgcjdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> collect list of candidate paths - if test -n "$JAVA_HOME"; then - KDE_JAVA_PREFIX($JAVA_HOME) - fi - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/lib/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - if test -d "$dir"; then - javadirs="$javadirs $dir" - fi - done - IFS=$kde_save_IFS - jredirs= - - dnl Now javadirs contains a list of paths that exist, all ending with bin/ - for dir in $javadirs; do - dnl Check for the java executable - if test -x "$dir/java"; then - sane_path=$(cd $dir; /bin/pwd) - dnl And also check for a libjvm.so somewhere under there - dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. - if test "$sane_path" != "/usr/bin"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - fi - done - - dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libgcj.so - kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - - dnl not needed for gcj - - if test "x$kde_java_libgcjdir" = "x"; then - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - fi - - else - JAVAC= - jni_includes= - fi - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - else - if test ! -r "$kde_java_libgcjdir/libgcj.so"; then - AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) - fi - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - dnl not needed for gcj compile - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - if test "x$kde_java_libgcjdir" = "x"; then - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - else - JVMLIBS="-L$kde_java_libgcjdir -lgcj" - fi - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -elif test -d "/Library/Java/Home"; then - kde_java_bindir="/Library/Java/Home/bin" - jni_includes="-I/Library/Java/Home/include" - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - JVMLIBS="-Wl,-framework,JavaVM" - - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([Apple Java Framework]) -else - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN([KDE_NEED_FLEX], -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN([AC_PATH_QTOPIA], -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_QT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_QTOPIA="-lqpe" - AC_SUBST(LIB_QTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_QTOPIA $LIBQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN([KDE_INIT_DOXYGEN], -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) -AC_MSG_RESULT($QTDOCDIR) - -AC_SUBST(QTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN([AC_FIND_BZIP2], -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([KDE_CHECK_SSL], -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$kdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - AC_HELP_STRING([--without-ssl],[disable SSL checks]), - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - if test "$ac_ssl_includes" != "/usr/include"; then - CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" - fi - - if AC_TRY_EVAL(ac_link); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) - fi -fi - -SSL_INCLUDES= - -if test "$ssl_includes" = "/usr/include"; then - if test -f /usr/kerberos/include/krb5.h; then - SSL_INCLUDES="-I/usr/kerberos/include" - fi -elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN([KDE_CHECK_STRLCPY], -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_BINUTILS], -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) - -AC_DEFUN([KDE_CHECK_PERL], -[ - KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ - AC_MSG_ERROR([No Perl found in your $PATH. -We need perl to generate some code.]) - ]) - AC_SUBST(PERL) -]) - -AC_DEFUN([KDE_CHECK_LARGEFILE], -[ -AC_SYS_LARGEFILE -if test "$ac_cv_sys_file_offset_bits" != no; then - CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" -fi - -if test "x$ac_cv_sys_large_files" != "xno"; then - CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" -fi - -]) - -dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) -dnl which allows to search for libs that get installed into the KDE prefix. -dnl -dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) -dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page -dnl also defines KSTUFF_PKG_ERRORS on error -AC_DEFUN([KDE_PKG_CHECK_MODULES], [ - - PKG_CONFIG_PATH="$prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" - if test "$prefix" != "$kde_libs_prefix"; then - PKG_CONFIG_PATH="$kde_libs_prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" - fi - export PKG_CONFIG_PATH - PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) -]) - - -dnl Check for PIE support in the compiler and linker -AC_DEFUN([KDE_CHECK_PIE_SUPPORT], -[ - AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - safe_CXXFLAGS=$CXXFLAGS - safe_LDFLAGS=$LDFLAGS - CXXFLAGS="$CXXFLAGS -fPIE" - LDFLAGS="$LDFLAGS -pie" - - AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) - - CXXFLAGS=$safe_CXXFLAGS - LDFLAGS=$safe_LDFLAGS - AC_LANG_RESTORE - ]) - - AC_MSG_CHECKING(if enabling -pie/fPIE support) - - AC_ARG_ENABLE(pie, - AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), - [kde_has_pie_support=$enableval], - [kde_has_pie_support=detect]) - - if test "$kde_has_pie_support" = "detect"; then - kde_has_pie_support=$kde_cv_val_pie_support - fi - - AC_MSG_RESULT([$kde_has_pie_support]) - - KDE_USE_FPIE="" - KDE_USE_PIE="" - - AC_SUBST([KDE_USE_FPIE]) - AC_SUBST([KDE_USE_PIE]) - - if test "$kde_has_pie_support" = "yes"; then - KDE_USE_FPIE="-fPIE" - KDE_USE_PIE="-pie" - fi -]) -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001 -## Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit , 1996 -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -## -## As a special exception to the GNU General Public License, if you -## distribute this file as part of a program that contains a -## configuration script generated by Autoconf, you may include it under -## the same distribution terms that you use for the rest of that program. - -# serial 47 AC_PROG_LIBTOOL - - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except M$VC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" - ;; - *) - old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'`; fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null && - echo_test_string="`eval $cmd`" && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LINUX_64_MODE="32" - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - LINUX_64_MODE="64" - case $host in - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) -AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s conftest.err; then - $2=yes - fi - fi - $rm conftest* -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - printf "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - testring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - *) - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ - = "XX$testring") >/dev/null 2>&1 && - new_result=`expr "X$testring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - testring=$testring$testring - done - testring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# -------------------- -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ------------------------------------------------------------------ -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_unknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - LDFLAGS="$LDFLAGS $link_static_flag" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - # According to Tom Tromey, Ian Lance Taylor reported there are C compilers - # that will create temporary files in the current directory regardless of - # the output directory. Thus, making CWD read-only will cause this test - # to fail, enabling locking or at least warning the user not to do parallel - # builds. - chmod -w . - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - if test ! -s out/conftest.err; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . - $rm conftest* out/* - rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi4*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext='$(test .$module = .yes && echo .so || echo .dylib)' - # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. - if test "$GCC" = yes; then - sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` - else - sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' - fi - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -kfreebsd*-gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='GNU ld.so' - ;; - -freebsd*) - objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - *) # from 3.2 on - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case "$host_cpu" in - ia64*) - shrext='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - libsuff= - if test "x$LINUX_64_MODE" = x64; then - # Some platforms are per default 64-bit, so there's no /lib64 - if test -d /lib64 -a ! -h /lib64; then - libsuff=64 - fi - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}" - sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}" - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -sco3.2v5*) - version_type=osf - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then - AC_LIBTOOL_LANG_CXX_CONFIG - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - else - tagname="" - fi - ;; - - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - else - tagname="" - fi - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 dll's -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -#- set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognise shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognise a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case "$host_cpu" in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - irix5* | nonstopux*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" - ;; - *) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" - ;; - esac - lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux*) - case $host_cpu in - alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* ) - lt_cv_deplibs_check_method=pass_all ;; - # the debian people say, arm and glibc 2.3.1 works for them with pass_all - arm* ) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' - else - lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' - fi - ;; - -osf3* | osf4* | osf5*) - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' - lt_cv_file_magic_test_file=/shlib/libc.so - lt_cv_deplibs_check_method=pass_all - ;; - -sco3.2v5*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - lt_cv_file_magic_test_file=/lib/libc.so - ;; - -sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/${ac_tool_prefix}nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - esac - fi - done - IFS="$lt_save_ifs" - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that LIBLTDL -# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If -# DIRECTORY is not provided and an installed libltdl is not found, it is -# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' -# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single -# quotes!). If your package is not flat and you're not using automake, -# define top_builddir and top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) -])# _LT_AC_LANG_CXX - - -# AC_LIBTOOL_F77 -# -------------- -# enable support for Fortran 77 libraries -AC_DEFUN([AC_LIBTOOL_F77], -[AC_REQUIRE([_LT_AC_LANG_F77]) -])# AC_LIBTOOL_F77 - - -# _LT_AC_LANG_F77 -# --------------- -AC_DEFUN([_LT_AC_LANG_F77], -[AC_REQUIRE([AC_PROG_F77]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) -])# _LT_AC_LANG_F77 - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# -------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}\n' - -_LT_AC_SYS_COMPILER - -# -# Check for any special shared library compilation flags. -# -_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= -if test "$GCC" = no; then - case $host_os in - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' - ;; - esac -fi -if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then - AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) - if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[[ ]]" >/dev/null; then : - else - AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) - _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no - fi -fi - - -# -# Check to make sure the static flag actually works. -# -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), - $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) - -# Report which librarie types wil actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case "$host_os" in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - darwin* | rhapsody*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; - esac - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= - -# Source file extension for C++ test sources. -ac_ext=cc - -# Object file extension for compiled C++ test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;\n" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - AC_PROG_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - darwin* | rhapsody*) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - dgux*) - case $cc_basename in - ec++) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd* | kfreebsd*-gnu) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux9*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC) - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case "$host_cpu" in - ia64*|hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - irix5* | irix6*) - case $cc_basename in - CC) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc) - # Intel C++ - with_gnu_ld=yes - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - cxx) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - osf3*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sco*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case $cc_basename in - CC) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The C++ compiler is used as linker so we must use $wl - # flag to pass the commands to the underlying system - # linker. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - fi - ;; - esac - ;; - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_AC_TAGVAR(GCC, $1)="$GXX" -_LT_AC_TAGVAR(LD, $1)="$LD" - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_POSTDEP_PREDEP($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -])# AC_LIBTOOL_LANG_CXX_CONFIG - -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext='$shrext' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation ? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - test -f Makefile && make "$ltmain" -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform the above into a raw symbol and a C symbol. -symxfrm='\1 \2\3 \3' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris* | sysv5*) - symcode='[[BDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGISTW]]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix4* | aix5*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | kfreebsd*-gnu) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux*) - case $cc_basename in - KCC) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - cxx) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - sco*) - case $cc_basename in - CC) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - *) - ;; - esac - ;; - solaris*) - case $cc_basename in - CC) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - unixware*) - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case "$host_cpu" in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux*) - case $CC in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - esac - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case "$host_os" in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" - ;; -esac -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix4* | aix5*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris* | sysv5*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$link_static_flag"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - - # KDE requires run time linking. Make it the default. - aix_use_runtimelinking=yes - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='-qmkshrobj ${wl}-G' - else - shared_flag='-qmkshrobj' - fi - fi - fi - - # Let the compiler handle the export list. - _LT_AC_TAGVAR(always_export_symbols, $1)=no - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # -bexpall does not export symbols beginning with underscore (_) - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds it's shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi4*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=no - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - if test "$GXX" = yes ; then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - case "$host_os" in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-Wl,-undefined -Wl,dynamic_lookup' - ;; - esac - fi - ;; - esac - lt_int_apple_cc_single_mod=no - output_verbose_link_cmd='echo' - if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then - lt_int_apple_cc_single_mod=yes - fi - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring' - fi - _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's - if test "X$lt_int_apple_cc_single_mod" = Xyes ; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | kfreebsd*-gnu) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $compiler_flags $libobjs $deplibs' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10* | hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs' - ;; - esac - else - case "$host_cpu" in - hppa*64*|ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - case "$host_cpu" in - hppa*64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - *) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - sco3.2v5*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4.2uw2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - hardcode_runpath_var=yes - runpath_var=LD_RUN_PATH - ;; - - sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs' - fi - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv5*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - # $CC -shared without GNU ld will not create a library from C++ - # object files and a static libstdc++, better avoid it by now - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - printf "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) - - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) -]) - -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) - -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && break - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_MSG_RESULT([$SED]) -]) diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index dd92cb3..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,863 +0,0 @@ -# generated automatically by aclocal 1.9.6 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005 Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.6])]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 7 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 3 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 12 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $1 | $1:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -# -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) -AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([acinclude.m4]) diff --git a/admin/Doxyfile.am b/admin/Doxyfile.am deleted file mode 100644 index 7ef5b5c..0000000 --- a/admin/Doxyfile.am +++ /dev/null @@ -1,102 +0,0 @@ -## generate API documentation with doxygen -apidox-am-yes: - @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$DOXDATA" ; then \ - export DOXDATA=$(kde_libs_htmldir)/en/common ; \ - fi ; \ - abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\ - test -d $(top_builddir)/apidocs || \ - ( cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ - --no-modulename --installdir=$(kde_libs_htmldir)/en \ - --no-recurse $(abs_top_srcdir) . ) ; \ - cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ - --recurse --no-modulename --installdir=$(kde_libs_htmldir)/en \ - $$abs_top_srcdir $(subdir) - -apidox-am-toplevel-yes: - @if test \! -d "$(top_srcdir)/doc/common/" && test -z "$$ADMIN" ; then \ - export DOXDATA=$(kde_libs_htmldir)/en/common ; \ - fi ; \ - abs_top_srcdir=`cd $(top_srcdir) && pwd` ;\ - cd $(top_builddir) && sh $$abs_top_srcdir/admin/doxygen.sh \ - --no-modulename --installdir=$(kde_libs_htmldir)/en \ - $$abs_top_srcdir - -## Don't generate API documentation without doxygen -apidox-am-no: - -apidox-am-toplevel-no: - - -apidox: - @if test "$(subdir)" != "."; then \ - $(MAKE) apidox-am-@KDE_HAS_DOXYGEN@ ;\ - else \ - $(MAKE) apidox-am-toplevel-@KDE_HAS_DOXYGEN@ ;\ - fi - - - -install-data-local: install-apidox - -## install API documentation -install-apidox: - @if test "$(subdir)" != "."; then \ - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html ; \ - if test -f $(top_builddir)/apidocs/$(subdir)/$(subdir).tag; then \ - echo $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ - $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/$(subdir).tag $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ - fi; \ - if test -d $(top_builddir)/apidocs/$(subdir)/html; then \ - list=`ls $(top_builddir)/apidocs/$(subdir)/html`; \ - echo "installing $(top_builddir)/apidocs/$(subdir)/html" ;\ - for file in $$list; do \ - $(INSTALL_DATA) $(top_builddir)/apidocs/$(subdir)/html/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir)/html; \ - done; \ - fi; \ - else\ - if test -d $(top_builddir)/apidocs; then \ - $(mkinstalldirs) $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs ;\ - list=`cd $(top_builddir)/apidocs && ls -1`; \ - echo "installing $(top_builddir)/apidocs/$$file" ;\ - echo "target directory $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs" ; \ - for file in $$list; do \ - if test -f $(top_builddir)/apidocs/$$file; then \ - $(INSTALL_DATA) $(top_builddir)/apidocs/$$file $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ - fi; \ - done ; fi; \ - fi - -uninstall-local: uninstall-apidox - -## uninstall API documentation -uninstall-apidox: - @if test "$(subdir)" != "."; then \ - if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); then \ - rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs/$(subdir); \ - fi \ - else \ - if test -d $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; then \ - rm -rfv $(DESTDIR)$(kde_htmldir)/en/$(PACKAGE)-apidocs; \ - fi \ - fi - -install-apidox-recurse: install-apidox - @set fnord $(MAKEFLAGS); amf=$$2; if test -n '$(SUBDIRS)'; then \ - list='$(SUBDIRS)'; \ - for subdir in $$list; do \ - if grep '^include .*Doxyfile.am' $(srcdir)/$$subdir/Makefile.am > /dev/null ; then \ - echo "Installing apidox from $$subdir"; \ - if test "$$subdir" != "."; then \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) GENERATE_FLAG=no install-apidox-recurse) || exit 1; \ - fi ; fi ;\ - done; \ - fi - - - -.PHONY: apidox-am-yes apidox-am-no install-data-local install-apidox install-apidox uninstall-local uninstall-apidox uninstall-apidox apidox apidox-am-toplevel-no apidox-am-toplevel-yes - - -# Local Variables: -# mode: makefile -# End: diff --git a/admin/Doxyfile.global b/admin/Doxyfile.global deleted file mode 100755 index 1b9f560..0000000 --- a/admin/Doxyfile.global +++ /dev/null @@ -1,192 +0,0 @@ -OUTPUT_LANGUAGE = English -USE_WINDOWS_ENCODING = NO -BRIEF_MEMBER_DESC = NO -REPEAT_BRIEF = YES -ABBREVIATE_BRIEF = -ALWAYS_DETAILED_SEC = YES -INLINE_INHERITED_MEMB = NO -FULL_PATH_NAMES = NO -STRIP_FROM_PATH = -SHORT_NAMES = NO -JAVADOC_AUTOBRIEF = YES -MULTILINE_CPP_IS_BRIEF = NO -INHERIT_DOCS = YES -DISTRIBUTE_GROUP_DOC = NO -TAB_SIZE = 4 -OPTIMIZE_OUTPUT_FOR_C = NO -OPTIMIZE_OUTPUT_JAVA = NO -SUBGROUPING = YES -EXTRACT_ALL = NO -EXTRACT_PRIVATE = NO -EXTRACT_STATIC = YES -EXTRACT_LOCAL_CLASSES = NO -HIDE_UNDOC_MEMBERS = NO -HIDE_UNDOC_CLASSES = YES -HIDE_FRIEND_COMPOUNDS = NO -HIDE_IN_BODY_DOCS = NO -INTERNAL_DOCS = NO -CASE_SENSE_NAMES = YES -HIDE_SCOPE_NAMES = NO -SHOW_INCLUDE_FILES = YES -INLINE_INFO = YES -SORT_BRIEF_DOCS = NO -SORT_BY_SCOPE_NAME = NO -GENERATE_TESTLIST = NO -GENERATE_BUGLIST = YES -GENERATE_DEPRECATEDLIST= YES -ENABLED_SECTIONS = -MAX_INITIALIZER_LINES = 30 -SHOW_USED_FILES = YES -QUIET = YES -WARNINGS = NO -WARN_IF_UNDOCUMENTED = NO -WARN_IF_DOC_ERROR = YES -WARN_FORMAT = -WARN_LOGFILE = -INPUT = -FILE_PATTERNS = *.h \ - *.cpp \ - *.cc \ - *.hpp \ - *.dox \ - *.c++ \ - *.cxx \ - *.h++ \ - *.hh -RECURSIVE = YES -EXCLUDE = -EXCLUDE_SYMLINKS = NO -EXCLUDE_PATTERNS = *.moc.* \ - moc* \ - *.all_cpp.* \ - *unload.* \ - */test/* \ - */tests/* \ - *_p.h -EXAMPLE_PATH = -EXAMPLE_PATTERNS = -EXAMPLE_RECURSIVE = NO -IMAGE_PATH = -INPUT_FILTER = -FILTER_SOURCE_FILES = NO -SOURCE_BROWSER = YES -INLINE_SOURCES = NO -STRIP_CODE_COMMENTS = YES -REFERENCED_BY_RELATION = YES -REFERENCES_RELATION = YES -VERBATIM_HEADERS = YES -ALPHABETICAL_INDEX = YES -COLS_IN_ALPHA_INDEX = 3 -HTML_OUTPUT = -HTML_FILE_EXTENSION = .html -HTML_HEADER = ../apidocs/common/header.html -HTML_FOOTER = ../apidocs/common/footer.html -HTML_STYLESHEET = ../apidocs/common/doxygen.css -HTML_ALIGN_MEMBERS = YES -GENERATE_HTMLHELP = NO -CHM_FILE = -HHC_LOCATION = -GENERATE_CHI = NO -BINARY_TOC = NO -TOC_EXPAND = NO -DISABLE_INDEX = YES -ENUM_VALUES_PER_LINE = 4 -GENERATE_TREEVIEW = NO -TREEVIEW_WIDTH = 250 -GENERATE_LATEX = NO -LATEX_OUTPUT = -LATEX_CMD_NAME = latex -MAKEINDEX_CMD_NAME = makeindex -COMPACT_LATEX = NO -PAPER_TYPE = a4wide -EXTRA_PACKAGES = -LATEX_HEADER = -PDF_HYPERLINKS = NO -USE_PDFLATEX = NO -LATEX_BATCHMODE = NO -LATEX_HIDE_INDICES = NO -GENERATE_RTF = NO -RTF_OUTPUT = -COMPACT_RTF = NO -RTF_HYPERLINKS = NO -RTF_STYLESHEET_FILE = -RTF_EXTENSIONS_FILE = -GENERATE_MAN = NO -MAN_OUTPUT = -MAN_EXTENSION = .kde3 -MAN_LINKS = YES -GENERATE_XML = NO -XML_OUTPUT = xml -XML_SCHEMA = -XML_DTD = -XML_PROGRAMLISTING = NO -GENERATE_AUTOGEN_DEF = NO -GENERATE_PERLMOD = NO -PERLMOD_LATEX = NO -PERLMOD_PRETTY = YES -PERLMOD_MAKEVAR_PREFIX = -ENABLE_PREPROCESSING = YES -SEARCH_INCLUDES = YES -INCLUDE_PATH = -INCLUDE_FILE_PATTERNS = -PREDEFINED = QT_VERSION=320 \ - __cplusplus \ - Q_WS_X11 -EXPAND_AS_DEFINED = -SKIP_FUNCTION_MACROS = YES -TAGFILES = -GENERATE_TAGFILE = -ALLEXTERNALS = NO -EXTERNAL_GROUPS = NO -PERL_PATH = -CLASS_DIAGRAMS = YES -HIDE_UNDOC_RELATIONS = NO -HAVE_DOT = NO -UML_LOOK = NO -TEMPLATE_RELATIONS = YES -INCLUDE_GRAPH = YES -INCLUDED_BY_GRAPH = YES -CALL_GRAPH = NO -GRAPHICAL_HIERARCHY = YES -DOT_IMAGE_FORMAT = png -DOT_PATH = -DOTFILE_DIRS = -MAX_DOT_GRAPH_WIDTH = 800 -MAX_DOT_GRAPH_HEIGHT = 1024 -MAX_DOT_GRAPH_DEPTH = 0 -GENERATE_LEGEND = YES -DOT_CLEANUP = YES -SEARCHENGINE = NO - -### KDE Settings -ALIASES = \ - "intern=\parInternal use only." \ - "reimp=\parReimplemented from superclass." \ - "obsolete=@deprecated" \ - "feature=\xrefitem features \"Feature(s)\" \"Features\"" \ - "maintainer=\xrefitem maintainers \"Maintainer(s)\" \"Maintainers\"" \ - "unmaintained=\xrefitem unmaintained \"Unmaintained\" \"Unmaintained\"" \ - "requirement=\xrefitem requirements \"Requirement(s)\" \"Requirements\"" \ - "faq=\xrefitem FAQ \"F.A.Q.\" \"F.A.Q.\"" \ - "authors=\xrefitem authors \"Author(s)\" \"Authors\"" \ - "FIXME=\xrefitem fixme \"Fixme\" \"Fixme\"" - -HTML_ALIGN_MEMBERS = YES -REFERENCED_BY_RELATION = NO -REFERENCES_RELATION = NO -VERBATIM_HEADERS = NO -GENERATE_HTML = YES -SOURCE_BROWSER = YES -GENERATE_AUTOGEN_DEF = NO -DETAILS_AT_TOP = YES -SORT_MEMBER_DOCS = YES -GENERATE_TODOLIST = YES -IGNORE_PREFIX = K -GENERATE_HTML = YES -CLASS_GRAPH = YES -COLLABORATION_GRAPH = NO - - -MACRO_EXPANSION = YES -EXPAND_ONLY_PREDEF = YES - diff --git a/admin/Makefile.common b/admin/Makefile.common deleted file mode 100644 index d07b404..0000000 --- a/admin/Makefile.common +++ /dev/null @@ -1,37 +0,0 @@ -### Makefile.common -### -### Copyright (C) 2002 by the KDE developers - -### All the real work is done by the shellscript cvs.sh - -SHELL=/bin/sh - -cvs dist configure configure.in configure.files subdirs package-messages package-merge Makefile.am acinclude.m4 extract-messages: - @admindir=$(admindir); \ - if test "x$$admindir" = x; then \ - admindir=.; until test -f $$admindir/admin/cvs.sh; do \ - admindir=$$admindir/..; \ - if test `cd $$admindir && pwd` = / ; then break; fi; \ - done; \ - admindir=$$admindir/admin; \ - if test -f $$admindir/cvs.sh; then :; else \ - echo "Can't find the admin/ directory in any parent of the"; \ - echo "current directory. Please set it with admindir=..."; \ - exit 1; \ - fi; \ - fi; \ - if test "$@" = "package-merge"; then \ - MAKE="$(MAKE)" POFILES="$(POFILES)" PACKAGE="$(PACKAGE)" \ - $(SHELL) $$admindir/cvs.sh package-merge ;\ - else \ - MAKE="$(MAKE)" $(SHELL) $$admindir/cvs.sh $@ ;\ - fi - -configure.in: configure.files subdirs -configure.files: subdirs - -svn: cvs - -.SILENT: - -.PHONY: svn cvs dist package-merge package-messages diff --git a/admin/acinclude.m4.in b/admin/acinclude.m4.in deleted file mode 100644 index 27476d4..0000000 --- a/admin/acinclude.m4.in +++ /dev/null @@ -1,5972 +0,0 @@ -## -*- autoconf -*- - -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 1997 Janos Farkas (chexum@shadow.banki.hu) -dnl (C) 1997,98,99 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -dnl Boston, MA 02110-1301, USA. - -dnl IMPORTANT NOTE: -dnl Please do not modify this file unless you expect your modifications to be -dnl carried into every other module in the repository. -dnl -dnl Single-module modifications are best placed in configure.in for kdelibs -dnl and kdebase or configure.in.in if present. - -# KDE_PATH_X_DIRECT -dnl Internal subroutine of AC_PATH_X. -dnl Set ac_x_includes and/or ac_x_libraries. -AC_DEFUN([KDE_PATH_X_DIRECT], -[ -AC_REQUIRE([KDE_CHECK_LIB64]) - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -AC_TRY_CPP([#include <$x_direct_test_include>], -[# We can compile using X headers with no special include directory. -ac_x_includes=], -[# Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done]) -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -AC_TRY_LINK([#include ], [${x_direct_test_function}(1)], -[LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries=], -[LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \ - /usr/X11/lib${kdelibsuff} \ - /usr/X11R6/lib${kdelibsuff} \ - /usr/X11R5/lib${kdelibsuff} \ - /usr/X11R4/lib${kdelibsuff} \ - \ - /usr/lib${kdelibsuff}/X11 \ - /usr/lib${kdelibsuff}/X11R6 \ - /usr/lib${kdelibsuff}/X11R5 \ - /usr/lib${kdelibsuff}/X11R4 \ - \ - /usr/local/X11/lib${kdelibsuff} \ - /usr/local/X11R6/lib${kdelibsuff} \ - /usr/local/X11R5/lib${kdelibsuff} \ - /usr/local/X11R4/lib${kdelibsuff} \ - \ - /usr/local/lib${kdelibsuff}/X11 \ - /usr/local/lib${kdelibsuff}/X11R6 \ - /usr/local/lib${kdelibsuff}/X11R5 \ - /usr/local/lib${kdelibsuff}/X11R4 \ - \ - /usr/X386/lib${kdelibsuff} \ - /usr/x386/lib${kdelibsuff} \ - /usr/XFree86/lib${kdelibsuff}/X11 \ - \ - /usr/lib${kdelibsuff} \ - /usr/local/lib${kdelibsuff} \ - /usr/unsupported/lib${kdelibsuff} \ - /usr/athena/lib${kdelibsuff} \ - /usr/local/x11r5/lib${kdelibsuff} \ - /usr/lpp/Xamples/lib${kdelibsuff} \ - /lib/usr/lib${kdelibsuff}/X11 \ - \ - /usr/openwin/lib${kdelibsuff} \ - /usr/openwin/share/lib${kdelibsuff} \ - ; \ -do -dnl Don't even attempt the hair of trying to link an X program! - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done]) -fi # $ac_x_libraries = NO -]) - - -dnl ------------------------------------------------------------------------ -dnl Find a file (or one of more files in a list of dirs) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_FIND_FILE], -[ -$3=NO -for i in $2; -do - for j in $1; - do - echo "configure: __oline__: $i/$j" >&AC_FD_CC - if test -r "$i/$j"; then - echo "taking that" >&AC_FD_CC - $3=$i - break 2 - fi - done -done -]) - -dnl KDE_FIND_PATH(program-name, variable-name, list-of-dirs, -dnl if-not-found, test-parameter, prepend-path) -dnl -dnl Look for program-name in list-of-dirs+$PATH. -dnl If prepend-path is set, look in $PATH+list-of-dirs instead. -dnl If found, $variable-name is set. If not, if-not-found is evaluated. -dnl test-parameter: if set, the program is executed with this arg, -dnl and only a successful exit code is required. -AC_DEFUN([KDE_FIND_PATH], -[ - AC_MSG_CHECKING([for $1]) - if test -n "$$2"; then - kde_cv_path="$$2"; - else - kde_cache=`echo $1 | sed 'y%./+-%__p_%'` - - AC_CACHE_VAL(kde_cv_path_$kde_cache, - [ - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - dirs="" - for dir in $PATH; do - dirs="$dirs $dir" - done - if test -z "$6"; then dnl Append dirs in PATH (default) - dirs="$3 $dirs" - else dnl Prepend dirs in PATH (if 6th arg is set) - dirs="$dirs $3" - fi - IFS=$kde_save_IFS - - for dir in $dirs; do - if test -x "$dir/$1"; then - if test -n "$5" - then - evalstr="$dir/$1 $5 2>&1 " - if eval $evalstr; then - kde_cv_path="$dir/$1" - break - fi - else - kde_cv_path="$dir/$1" - break - fi - fi - done - - eval "kde_cv_path_$kde_cache=$kde_cv_path" - - ]) - - eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\"" - - fi - - if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then - AC_MSG_RESULT(not found) - $4 - else - AC_MSG_RESULT($kde_cv_path) - $2=$kde_cv_path - - fi -]) - -AC_DEFUN([KDE_MOC_ERROR_MESSAGE], -[ - AC_MSG_ERROR([No Qt meta object compiler (moc) found! -Please check whether you installed Qt correctly. -You need to have a running moc binary. -configure tried to run $ac_cv_path_moc and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable MOC to the right one before running -configure. -]) -]) - -AC_DEFUN([KDE_UIC_ERROR_MESSAGE], -[ - AC_MSG_WARN([No Qt ui compiler (uic) found! -Please check whether you installed Qt correctly. -You need to have a running uic binary. -configure tried to run $ac_cv_path_uic and the test didn't -succeed. If configure shouldn't have tried this one, set -the environment variable UIC to the right one before running -configure. -]) -]) - - -AC_DEFUN([KDE_CHECK_UIC_FLAG], -[ - AC_MSG_CHECKING([whether uic supports -$1 ]) - kde_cache=`echo $1 | sed 'y% .=/+-%____p_%'` - AC_CACHE_VAL(kde_cv_prog_uic_$kde_cache, - [ - cat >conftest.ui < -EOT - ac_uic_testrun="$UIC_PATH -$1 $2 conftest.ui >/dev/null" - if AC_TRY_EVAL(ac_uic_testrun); then - eval "kde_cv_prog_uic_$kde_cache=yes" - else - eval "kde_cv_prog_uic_$kde_cache=no" - fi - rm -f conftest* - ]) - - if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then - AC_MSG_RESULT([yes]) - : - $3 - else - AC_MSG_RESULT([no]) - : - $4 - fi -]) - - -dnl ------------------------------------------------------------------------ -dnl Find the meta object compiler and the ui compiler in the PATH, -dnl in $QTDIR/bin, and some more usual places -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_QT_MOC_UIC], -[ - AC_REQUIRE([KDE_CHECK_PERL]) - qt_bindirs="" - for dir in $kde_qt_dirs; do - qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc" - done - qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin" - if test ! "$ac_qt_bindir" = "NO"; then - qt_bindirs="$ac_qt_bindir $qt_bindirs" - fi - - KDE_FIND_PATH(moc, MOC, [$qt_bindirs], [KDE_MOC_ERROR_MESSAGE]) - if test -z "$UIC_NOT_NEEDED"; then - KDE_FIND_PATH(uic, UIC_PATH, [$qt_bindirs], [UIC_PATH=""]) - if test -z "$UIC_PATH" ; then - KDE_UIC_ERROR_MESSAGE - exit 1 - else - UIC=$UIC_PATH - - if test $kde_qtver = 3; then - KDE_CHECK_UIC_FLAG(L,[/nonexistent],ac_uic_supports_libpath=yes,ac_uic_supports_libpath=no) - KDE_CHECK_UIC_FLAG(nounload,,ac_uic_supports_nounload=yes,ac_uic_supports_nounload=no) - - if test x$ac_uic_supports_libpath = xyes; then - UIC="$UIC -L \$(kde_widgetdir)" - fi - if test x$ac_uic_supports_nounload = xyes; then - UIC="$UIC -nounload" - fi - fi - fi - else - UIC="echo uic not available: " - fi - - AC_SUBST(MOC) - AC_SUBST(UIC) - - UIC_TR="i18n" - if test $kde_qtver = 3; then - UIC_TR="tr2i18n" - fi - - AC_SUBST(UIC_TR) -]) - -AC_DEFUN([KDE_1_CHECK_PATHS], -[ - KDE_1_CHECK_PATH_HEADERS - - KDE_TEST_RPATH= - - if test -n "$USE_RPATH"; then - - if test -n "$kde_libraries"; then - KDE_TEST_RPATH="-R $kde_libraries" - fi - - if test -n "$qt_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries" - fi - - if test -n "$x_libraries"; then - KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries" - fi - - KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH" - fi - -AC_MSG_CHECKING([for KDE libraries installed]) -ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5' - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - AC_MSG_RESULT(yes) -else - AC_MSG_ERROR([your system fails at linking a small KDE application! -Check, if your compiler is installed correctly and if you have used the -same compiler to compile Qt and kdelibs as you did use now. -For more details about this problem, look at the end of config.log.]) -fi - -if eval `KDEDIR= ./conftest 2>&5`; then - kde_result=done -else - kde_result=problems -fi - -KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log -kde_have_all_paths=yes - -KDE_SET_PATHS($kde_result) - -]) - -AC_DEFUN([KDE_SET_PATHS], -[ - kde_cv_all_paths="kde_have_all_paths=\"yes\" \ - kde_htmldir=\"$kde_htmldir\" \ - kde_appsdir=\"$kde_appsdir\" \ - kde_icondir=\"$kde_icondir\" \ - kde_sounddir=\"$kde_sounddir\" \ - kde_datadir=\"$kde_datadir\" \ - kde_locale=\"$kde_locale\" \ - kde_cgidir=\"$kde_cgidir\" \ - kde_confdir=\"$kde_confdir\" \ - kde_kcfgdir=\"$kde_kcfgdir\" \ - kde_mimedir=\"$kde_mimedir\" \ - kde_toolbardir=\"$kde_toolbardir\" \ - kde_wallpaperdir=\"$kde_wallpaperdir\" \ - kde_templatesdir=\"$kde_templatesdir\" \ - kde_bindir=\"$kde_bindir\" \ - kde_servicesdir=\"$kde_servicesdir\" \ - kde_servicetypesdir=\"$kde_servicetypesdir\" \ - kde_moduledir=\"$kde_moduledir\" \ - kde_styledir=\"$kde_styledir\" \ - kde_widgetdir=\"$kde_widgetdir\" \ - xdg_appsdir=\"$xdg_appsdir\" \ - xdg_menudir=\"$xdg_menudir\" \ - xdg_directorydir=\"$xdg_directorydir\" \ - kde_result=$1" -]) - -AC_DEFUN([KDE_SET_DEFAULT_PATHS], -[ -if test "$1" = "default"; then - - if test -z "$kde_htmldir"; then - kde_htmldir='\${datadir}/doc/HTML' - fi - if test -z "$kde_appsdir"; then - kde_appsdir='\${datadir}/applnk' - fi - if test -z "$kde_icondir"; then - kde_icondir='\${datadir}/icons' - fi - if test -z "$kde_sounddir"; then - kde_sounddir='\${datadir}/sounds' - fi - if test -z "$kde_datadir"; then - kde_datadir='\${datadir}/apps' - fi - if test -z "$kde_locale"; then - kde_locale='\${datadir}/locale' - fi - if test -z "$kde_cgidir"; then - kde_cgidir='\${exec_prefix}/cgi-bin' - fi - if test -z "$kde_confdir"; then - kde_confdir='\${datadir}/config' - fi - if test -z "$kde_kcfgdir"; then - kde_kcfgdir='\${datadir}/config.kcfg' - fi - if test -z "$kde_mimedir"; then - kde_mimedir='\${datadir}/mimelnk' - fi - if test -z "$kde_toolbardir"; then - kde_toolbardir='\${datadir}/toolbar' - fi - if test -z "$kde_wallpaperdir"; then - kde_wallpaperdir='\${datadir}/wallpapers' - fi - if test -z "$kde_templatesdir"; then - kde_templatesdir='\${datadir}/templates' - fi - if test -z "$kde_bindir"; then - kde_bindir='\${exec_prefix}/bin' - fi - if test -z "$kde_servicesdir"; then - kde_servicesdir='\${datadir}/services' - fi - if test -z "$kde_servicetypesdir"; then - kde_servicetypesdir='\${datadir}/servicetypes' - fi - if test -z "$kde_moduledir"; then - if test "$kde_qtver" = "2"; then - kde_moduledir='\${libdir}/kde2' - else - kde_moduledir='\${libdir}/kde3' - fi - fi - if test -z "$kde_styledir"; then - kde_styledir='\${libdir}/kde3/plugins/styles' - fi - if test -z "$kde_widgetdir"; then - kde_widgetdir='\${libdir}/kde3/plugins/designer' - fi - if test -z "$xdg_appsdir"; then - xdg_appsdir='\${datadir}/applications/kde' - fi - if test -z "$xdg_menudir"; then - xdg_menudir='\${sysconfdir}/xdg/menus' - fi - if test -z "$xdg_directorydir"; then - xdg_directorydir='\${datadir}/desktop-directories' - fi - - KDE_SET_PATHS(defaults) - -else - - if test $kde_qtver = 1; then - AC_MSG_RESULT([compiling]) - KDE_1_CHECK_PATHS - else - AC_MSG_ERROR([path checking not yet supported for KDE 2]) - fi - -fi -]) - -AC_DEFUN([KDE_CHECK_PATHS_FOR_COMPLETENESS], -[ if test -z "$kde_htmldir" || test -z "$kde_appsdir" || - test -z "$kde_icondir" || test -z "$kde_sounddir" || - test -z "$kde_datadir" || test -z "$kde_locale" || - test -z "$kde_cgidir" || test -z "$kde_confdir" || - test -z "$kde_kcfgdir" || - test -z "$kde_mimedir" || test -z "$kde_toolbardir" || - test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" || - test -z "$kde_bindir" || test -z "$kde_servicesdir" || - test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" || - test -z "$kde_styledir" || test -z "kde_widgetdir" || - test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" || - test "x$kde_have_all_paths" != "xyes"; then - kde_have_all_paths=no - fi -]) - -AC_DEFUN([KDE_MISSING_PROG_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed KDE correctly. -]) -]) - -AC_DEFUN([KDE_MISSING_ARTS_ERROR], -[ - AC_MSG_ERROR([The important program $1 was not found! -Please check whether you installed aRts correctly or use ---without-arts to compile without aRts support (this will remove functionality). -]) -]) - -AC_DEFUN([KDE_SET_DEFAULT_BINDIRS], -[ - kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin" - test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs" - if test -n "$KDEDIRS"; then - kde_save_IFS=$IFS - IFS=: - for dir in $KDEDIRS; do - kde_default_bindirs="$dir/bin $kde_default_bindirs " - done - IFS=$kde_save_IFS - fi -]) - -AC_DEFUN([KDE_SUBST_PROGRAMS], -[ - AC_ARG_WITH(arts, - AC_HELP_STRING([--without-arts],[build without aRts [default=no]]), - [build_arts=$withval], - [build_arts=yes] - ) - AM_CONDITIONAL(include_ARTS, test "$build_arts" '!=' "no") - if test "$build_arts" = "no"; then - AC_DEFINE(WITHOUT_ARTS, 1, [Defined if compiling without arts]) - fi - - KDE_SET_DEFAULT_BINDIRS - kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs" - KDE_FIND_PATH(dcopidl, DCOPIDL, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl)]) - KDE_FIND_PATH(dcopidl2cpp, DCOPIDL2CPP, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidl2cpp)]) - if test "$build_arts" '!=' "no"; then - KDE_FIND_PATH(mcopidl, MCOPIDL, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(mcopidl)]) - KDE_FIND_PATH(artsc-config, ARTSCCONFIG, [$kde_default_bindirs], [KDE_MISSING_ARTS_ERROR(artsc-config)]) - fi - KDE_FIND_PATH(meinproc, MEINPROC, [$kde_default_bindirs]) - - kde32ornewer=1 - kde33ornewer=1 - if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then - kde32ornewer= - kde33ornewer= - else - if test "$kde_qtver" = "3"; then - if test "$kde_qtsubver" -le 1; then - kde32ornewer= - fi - if test "$kde_qtsubver" -le 2; then - kde33ornewer= - fi - if test "$KDECONFIG" != "compiled"; then - if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then - kde33ornewer= - fi - fi - fi - fi - - if test -n "$kde32ornewer"; then - KDE_FIND_PATH(kconfig_compiler, KCONFIG_COMPILER, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kconfig_compiler)]) - KDE_FIND_PATH(dcopidlng, DCOPIDLNG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(dcopidlng)]) - fi - if test -n "$kde33ornewer"; then - KDE_FIND_PATH(makekdewidgets, MAKEKDEWIDGETS, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(makekdewidgets)]) - AC_SUBST(MAKEKDEWIDGETS) - fi - KDE_FIND_PATH(xmllint, XMLLINT, [${prefix}/bin ${exec_prefix}/bin], [XMLLINT=""]) - - if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then - kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share" - test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs" - AC_FIND_FILE(apps/ksgmltools2/customization/kde-chunk.xsl, $kde_sharedirs, KDE_XSL_STYLESHEET) - if test "$KDE_XSL_STYLESHEET" = "NO"; then - KDE_XSL_STYLESHEET="" - else - KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl" - fi - fi - - DCOP_DEPENDENCIES='$(DCOPIDL)' - if test -n "$kde32ornewer"; then - KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)' - DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)' - AC_SUBST(KCONFIG_COMPILER) - AC_SUBST(KCFG_DEPENDENCIES) - AC_SUBST(DCOPIDLNG) - fi - AC_SUBST(DCOPIDL) - AC_SUBST(DCOPIDL2CPP) - AC_SUBST(DCOP_DEPENDENCIES) - AC_SUBST(MCOPIDL) - AC_SUBST(ARTSCCONFIG) - AC_SUBST(MEINPROC) - AC_SUBST(KDE_XSL_STYLESHEET) - AC_SUBST(XMLLINT) -])dnl - -AC_DEFUN([AC_CREATE_KFSSTND], -[ -AC_REQUIRE([AC_CHECK_RPATH]) - -AC_MSG_CHECKING([for KDE paths]) -kde_result="" -kde_cached_paths=yes -AC_CACHE_VAL(kde_cv_all_paths, -[ - KDE_SET_DEFAULT_PATHS($1) - kde_cached_paths=no -]) -eval "$kde_cv_all_paths" -KDE_CHECK_PATHS_FOR_COMPLETENESS -if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then - # wrong values were cached, may be, we can set better ones - kde_result= - kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir= - kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir= - kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir= - kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir= - kde_have_all_paths= - kde_styledir= - kde_widgetdir= - xdg_appsdir = xdg_menudir= xdg_directorydir= - KDE_SET_DEFAULT_PATHS($1) - eval "$kde_cv_all_paths" - KDE_CHECK_PATHS_FOR_COMPLETENESS - kde_result="$kde_result (cache overridden)" -fi -if test "$kde_have_all_paths" = "no"; then - AC_MSG_ERROR([configure could not run a little KDE program to test the environment. -Since it had compiled and linked before, it must be a strange problem on your system. -Look at config.log for details. If you are not able to fix this, look at -http://www.kde.org/faq/installation.html or any www.kde.org mirror. -(If you're using an egcs version on Linux, you may update binutils!) -]) -else - rm -f conftest* - AC_MSG_RESULT($kde_result) -fi - -bindir=$kde_bindir - -KDE_SUBST_PROGRAMS - -]) - -AC_DEFUN([AC_SUBST_KFSSTND], -[ -AC_SUBST(kde_htmldir) -AC_SUBST(kde_appsdir) -AC_SUBST(kde_icondir) -AC_SUBST(kde_sounddir) -AC_SUBST(kde_datadir) -AC_SUBST(kde_locale) -AC_SUBST(kde_confdir) -AC_SUBST(kde_kcfgdir) -AC_SUBST(kde_mimedir) -AC_SUBST(kde_wallpaperdir) -AC_SUBST(kde_bindir) -dnl X Desktop Group standards -AC_SUBST(xdg_appsdir) -AC_SUBST(xdg_menudir) -AC_SUBST(xdg_directorydir) -dnl for KDE 2 -AC_SUBST(kde_templatesdir) -AC_SUBST(kde_servicesdir) -AC_SUBST(kde_servicetypesdir) -AC_SUBST(kde_moduledir) -AC_SUBST(kdeinitdir, '$(kde_moduledir)') -AC_SUBST(kde_styledir) -AC_SUBST(kde_widgetdir) -if test "$kde_qtver" = 1; then - kde_minidir="$kde_icondir/mini" -else -# for KDE 1 - this breaks KDE2 apps using minidir, but -# that's the plan ;-/ - kde_minidir="/dev/null" -fi -dnl AC_SUBST(kde_minidir) -dnl AC_SUBST(kde_cgidir) -dnl AC_SUBST(kde_toolbardir) -]) - -AC_DEFUN([KDE_MISC_TESTS], -[ - dnl Checks for libraries. - AC_CHECK_LIB(util, main, [LIBUTIL="-lutil"]) dnl for *BSD - AC_SUBST(LIBUTIL) - AC_CHECK_LIB(compat, main, [LIBCOMPAT="-lcompat"]) dnl for *BSD - AC_SUBST(LIBCOMPAT) - kde_have_crypt= - AC_CHECK_LIB(crypt, crypt, [LIBCRYPT="-lcrypt"; kde_have_crypt=yes], - AC_CHECK_LIB(c, crypt, [kde_have_crypt=yes], [ - AC_MSG_WARN([you have no crypt in either libcrypt or libc. -You should install libcrypt from another source or configure with PAM -support]) - kde_have_crypt=no - ])) - AC_SUBST(LIBCRYPT) - if test $kde_have_crypt = yes; then - AC_DEFINE_UNQUOTED(HAVE_CRYPT, 1, [Defines if your system has the crypt function]) - fi - AC_CHECK_SOCKLEN_T - AC_CHECK_LIB(dnet, dnet_ntoa, [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"]) - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - AC_CHECK_LIB(dnet_stub, dnet_ntoa, - [X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"]) - fi - AC_CHECK_FUNC(inet_ntoa) - if test $ac_cv_func_inet_ntoa = no; then - AC_CHECK_LIB(nsl, inet_ntoa, X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl") - fi - AC_CHECK_FUNC(connect) - if test $ac_cv_func_connect = no; then - AC_CHECK_LIB(socket, connect, X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS", , - $X_EXTRA_LIBS) - fi - - AC_CHECK_FUNC(remove) - if test $ac_cv_func_remove = no; then - AC_CHECK_LIB(posix, remove, X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix") - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - AC_CHECK_FUNC(shmat, , - AC_CHECK_LIB(ipc, shmat, X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc")) - - # more headers that need to be explicitly included on darwin - AC_CHECK_HEADERS(sys/types.h stdint.h) - - # sys/bitypes.h is needed for uint32_t and friends on Tru64 - AC_CHECK_HEADERS(sys/bitypes.h) - - # darwin requires a poll emulation library - AC_CHECK_LIB(poll, poll, LIB_POLL="-lpoll") - - # for some image handling on Mac OS X - AC_CHECK_HEADERS(Carbon/Carbon.h) - - # CoreAudio framework - AC_CHECK_HEADER(CoreAudio/CoreAudio.h, [ - AC_DEFINE(HAVE_COREAUDIO, 1, [Define if you have the CoreAudio API]) - FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio" - ]) - - AC_CHECK_RES_INIT - AC_SUBST(LIB_POLL) - AC_SUBST(FRAMEWORK_COREAUDIO) - LIBSOCKET="$X_EXTRA_LIBS" - AC_SUBST(LIBSOCKET) - AC_SUBST(X_EXTRA_LIBS) - AC_CHECK_LIB(ucb, killpg, [LIBUCB="-lucb"]) dnl for Solaris2.4 - AC_SUBST(LIBUCB) - - case $host in dnl this *is* LynxOS specific - *-*-lynxos* ) - AC_MSG_CHECKING([LynxOS header file wrappers]) - [CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"] - AC_MSG_RESULT(disabled) - AC_CHECK_LIB(bsd, gethostbyname, [LIBSOCKET="-lbsd"]) dnl for LynxOS - ;; - esac - - KDE_CHECK_TYPES - KDE_CHECK_LIBDL - KDE_CHECK_STRLCPY - KDE_CHECK_PIE_SUPPORT - -# darwin needs this to initialize the environment -AC_CHECK_HEADERS(crt_externs.h) -AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])]) - -AH_VERBATIM(_DARWIN_ENVIRON, -[ -#if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H) -# include -# include -# define environ (*_NSGetEnviron()) -#endif -]) - -AH_VERBATIM(_AIX_STRINGS_H_BZERO, -[ -/* - * AIX defines FD_SET in terms of bzero, but fails to include - * that defines bzero. - */ - -#if defined(_AIX) -#include -#endif -]) - -AC_CHECK_FUNCS([vsnprintf snprintf]) - -AH_VERBATIM(_TRU64,[ -/* - * On HP-UX, the declaration of vsnprintf() is needed every time ! - */ - -#if !defined(HAVE_VSNPRINTF) || defined(hpux) -#if __STDC__ -#include -#include -#else -#include -#endif -#ifdef __cplusplus -extern "C" -#endif -int vsnprintf(char *str, size_t n, char const *fmt, va_list ap); -#ifdef __cplusplus -extern "C" -#endif -int snprintf(char *str, size_t n, char const *fmt, ...); -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Find the header files and libraries for X-Windows. Extended the -dnl macro AC_PATH_X -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([K_PATH_X], -[ -AC_REQUIRE([KDE_MISC_TESTS])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_ARG_ENABLE( - embedded, - AC_HELP_STRING([--enable-embedded],[link to Qt-embedded, don't use X]), - kde_use_qt_emb=$enableval, - kde_use_qt_emb=no -) - -AC_ARG_ENABLE( - qtopia, - AC_HELP_STRING([--enable-qtopia],[link to Qt-embedded, link to the Qtopia Environment]), - kde_use_qt_emb_palm=$enableval, - kde_use_qt_emb_palm=no -) - -AC_ARG_ENABLE( - mac, - AC_HELP_STRING([--enable-mac],[link to Qt/Mac (don't use X)]), - kde_use_qt_mac=$enableval, - kde_use_qt_mac=no -) - -# used to disable x11-specific stuff on special platforms -AM_CONDITIONAL(include_x11, test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no") - -if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then - -AC_MSG_CHECKING(for X) - -AC_CACHE_VAL(kde_cv_have_x, -[# One or both of the vars are not set, and there is no cached value. -if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then - kde_x_includes=NO -else - kde_x_includes=$x_includes -fi -if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then - kde_x_libraries=NO -else - kde_x_libraries=$x_libraries -fi - -# below we use the standard autoconf calls -ac_x_libraries=$kde_x_libraries -ac_x_includes=$kde_x_includes - -KDE_PATH_X_DIRECT -dnl AC_PATH_X_XMKMF picks /usr/lib as the path for the X libraries. -dnl Unfortunately, if compiling with the N32 ABI, this is not the correct -dnl location. The correct location is /usr/lib32 or an undefined value -dnl (the linker is smart enough to pick the correct default library). -dnl Things work just fine if you use just AC_PATH_X_DIRECT. -dnl Solaris has a similar problem. AC_PATH_X_XMKMF forces x_includes to -dnl /usr/openwin/include, which doesn't work. /usr/include does work, so -dnl x_includes should be left alone. -case "$host" in -mips-sgi-irix6*) - ;; -*-*-solaris*) - ;; -*) - _AC_PATH_X_XMKMF - if test -z "$ac_x_includes"; then - ac_x_includes="." - fi - if test -z "$ac_x_libraries"; then - ac_x_libraries="/usr/lib${kdelibsuff}" - fi -esac -#from now on we use our own again - -# when the user already gave --x-includes, we ignore -# what the standard autoconf macros told us. -if test "$kde_x_includes" = NO; then - kde_x_includes=$ac_x_includes -fi - -# for --x-libraries too -if test "$kde_x_libraries" = NO; then - kde_x_libraries=$ac_x_libraries -fi - -if test "$kde_x_includes" = NO; then - AC_MSG_ERROR([Can't find X includes. Please check your installation and add the correct paths!]) -fi - -if test "$kde_x_libraries" = NO; then - AC_MSG_ERROR([Can't find X libraries. Please check your installation and add the correct paths!]) -fi - -# Record where we found X for the cache. -kde_cv_have_x="have_x=yes \ - kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries" -])dnl - -eval "$kde_cv_have_x" - -if test "$have_x" != yes; then - AC_MSG_RESULT($have_x) - no_x=yes -else - AC_MSG_RESULT([libraries $kde_x_libraries, headers $kde_x_includes]) -fi - -if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then - X_INCLUDES="" - x_includes="."; dnl better than nothing :- - else - x_includes=$kde_x_includes - X_INCLUDES="-I$x_includes" -fi - -if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then - X_LDFLAGS="" - x_libraries="/usr/lib"; dnl better than nothing :- - else - x_libraries=$kde_x_libraries - X_LDFLAGS="-L$x_libraries" -fi -all_includes="$X_INCLUDES" -all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS" - -# Check for libraries that X11R6 Xt/Xaw programs need. -ac_save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS $X_LDFLAGS" -# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to -# check for ICE first), but we must link in the order -lSM -lICE or -# we get undefined symbols. So assume we have SM if we have ICE. -# These have to be linked with before -lX11, unlike the other -# libraries we check for below, so use a different variable. -# --interran@uluru.Stanford.EDU, kb@cs.umb.edu. -AC_CHECK_LIB(ICE, IceConnectionNumber, - [LIBSM="-lSM -lICE"], , $X_EXTRA_LIBS) -LDFLAGS="$ac_save_LDFLAGS" - -LIB_X11='-lX11 $(LIBSOCKET)' - -AC_MSG_CHECKING(for libXext) -AC_CACHE_VAL(kde_cv_have_libXext, -[ -kde_ldflags_safe="$LDFLAGS" -kde_libs_safe="$LIBS" - -LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS" -LIBS="-lXext -lX11 $LIBSOCKET" - -AC_TRY_LINK([ -#include -#ifdef STDC_HEADERS -# include -#endif -], -[ -printf("hello Xext\n"); -], -kde_cv_have_libXext=yes, -kde_cv_have_libXext=no -) - -LDFLAGS=$kde_ldflags_safe -LIBS=$kde_libs_safe -]) - -AC_MSG_RESULT($kde_cv_have_libXext) - -if test "$kde_cv_have_libXext" = "no"; then - AC_MSG_ERROR([We need a working libXext to proceed. Since configure -can't find it itself, we stop here assuming that make wouldn't find -them either.]) -fi - -LIB_XEXT="-lXext" -QTE_NORTTI="" - -elif test "$kde_use_qt_emb" = "yes"; then - dnl We're using QT Embedded - CPPFLAGS=-DQWS - CXXFLAGS="$CXXFLAGS -fno-rtti" - QTE_NORTTI="-fno-rtti -DQWS" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -elif test "$kde_use_qt_mac" = "yes"; then - dnl We're using QT/Mac (I use QT_MAC so that qglobal.h doesn't *have* to - dnl be included to get the information) --Sam - CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp" - CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp" - X_PRE_LIBS="" - LIB_X11="" - LIB_XEXT="" - LIB_XRENDER="" - LIBSM="" - X_INCLUDES="" - X_LDFLAGS="" - x_includes="" - x_libraries="" -fi -AC_SUBST(X_PRE_LIBS) -AC_SUBST(LIB_X11) -AC_SUBST(LIB_XRENDER) -AC_SUBST(LIBSM) -AC_SUBST(X_INCLUDES) -AC_SUBST(X_LDFLAGS) -AC_SUBST(x_includes) -AC_SUBST(x_libraries) -AC_SUBST(QTE_NORTTI) -AC_SUBST(LIB_XEXT) - -]) - -AC_DEFUN([KDE_PRINT_QT_PROGRAM], -[ -AC_REQUIRE([KDE_USE_QT]) -cat > conftest.$ac_ext < -#include -EOF -if test "$kde_qtver" = "2"; then -cat >> conftest.$ac_ext < -#include -#include -EOF - -if test $kde_qtsubver -gt 0; then -cat >> conftest.$ac_ext <> conftest.$ac_ext < -#include -#include -EOF -fi - -echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext -cat >> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <> conftest.$ac_ext <&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC -fi - -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe" -export LD_LIBRARY_PATH -LIBRARY_PATH="$ac_LIBRARY_PATH" -export LIBRARY_PATH -AC_LANG_RESTORE -]) - -if test "$kde_cv_qt_direct" = "yes"; then - AC_MSG_RESULT(yes) - $1 -else - AC_MSG_RESULT(no) - $2 -fi -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the Qt headers and libraries. -dnl $(QT_LDFLAGS) will be -Lqtliblocation (if needed) -dnl and $(QT_INCLUDES) will be -Iqthdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_PATH_QT_1_3], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([KDE_USE_QT]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -dnl ------------------------------------------------------------------------ -dnl Add configure flag to enable linking to MT version of Qt library. -dnl ------------------------------------------------------------------------ - -AC_ARG_ENABLE( - mt, - AC_HELP_STRING([--disable-mt],[link to non-threaded Qt (deprecated)]), - kde_use_qt_mt=$enableval, - [ - if test $kde_qtver = 3; then - kde_use_qt_mt=yes - else - kde_use_qt_mt=no - fi - ] -) - -USING_QT_MT="" - -dnl ------------------------------------------------------------------------ -dnl If we not get --disable-qt-mt then adjust some vars for the host. -dnl ------------------------------------------------------------------------ - -KDE_MT_LDFLAGS= -KDE_MT_LIBS= -if test "x$kde_use_qt_mt" = "xyes"; then - KDE_CHECK_THREADING - if test "x$kde_use_threading" = "xyes"; then - CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS" - KDE_MT_LDFLAGS="$USE_THREADS" - KDE_MT_LIBS="$LIBPTHREAD" - else - kde_use_qt_mt=no - fi -fi -AC_SUBST(KDE_MT_LDFLAGS) -AC_SUBST(KDE_MT_LIBS) - -kde_qt_was_given=yes - -dnl ------------------------------------------------------------------------ -dnl If we haven't been told how to link to Qt, we work it out for ourselves. -dnl ------------------------------------------------------------------------ -if test -z "$LIBQT_GLOB"; then - if test "x$kde_use_qt_emb" = "xyes"; then - LIBQT_GLOB="libqte.*" - else - LIBQT_GLOB="libqt.*" - fi -fi - -dnl ------------------------------------------------------------ -dnl If we got --enable-embedded then adjust the Qt library name. -dnl ------------------------------------------------------------ -if test "x$kde_use_qt_emb" = "xyes"; then - qtlib="qte" -else - qtlib="qt" -fi - -kde_int_qt="-l$qtlib" - -if test -z "$LIBQPE"; then -dnl ------------------------------------------------------------ -dnl If we got --enable-palmtop then add -lqpe to the link line -dnl ------------------------------------------------------------ - if test "x$kde_use_qt_emb" = "xyes"; then - if test "x$kde_use_qt_emb_palm" = "xyes"; then - LIB_QPE="-lqpe" - else - LIB_QPE="" - fi - else - LIB_QPE="" - fi -fi - -dnl ------------------------------------------------------------------------ -dnl If we got --enable-qt-mt then adjust the Qt library name for the host. -dnl ------------------------------------------------------------------------ - -if test "x$kde_use_qt_mt" = "xyes"; then - LIBQT="-l$qtlib-mt" - kde_int_qt="-l$qtlib-mt" - LIBQT_GLOB="lib$qtlib-mt.*" - USING_QT_MT="using -mt" -else - LIBQT="-l$qtlib" -fi - -if test $kde_qtver != 1; then - - AC_REQUIRE([AC_FIND_PNG]) - AC_REQUIRE([AC_FIND_JPEG]) - LIBQT="$LIBQT $LIBPNG $LIBJPEG" -fi - -if test $kde_qtver = 3; then - AC_REQUIRE([KDE_CHECK_LIBDL]) - LIBQT="$LIBQT $LIBDL" -fi - -AC_MSG_CHECKING([for Qt]) - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET" -fi -ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO -qt_libraries="" -qt_includes="" -AC_ARG_WITH(qt-dir, - AC_HELP_STRING([--with-qt-dir=DIR],[where the root of Qt is installed ]), - [ ac_qt_includes="$withval"/include - ac_qt_libraries="$withval"/lib${kdelibsuff} - ac_qt_bindir="$withval"/bin - ]) - -AC_ARG_WITH(qt-includes, - AC_HELP_STRING([--with-qt-includes=DIR],[where the Qt includes are. ]), - [ - ac_qt_includes="$withval" - ]) - -kde_qt_libs_given=no - -AC_ARG_WITH(qt-libraries, - AC_HELP_STRING([--with-qt-libraries=DIR],[where the Qt library is installed.]), - [ ac_qt_libraries="$withval" - kde_qt_libs_given=yes - ]) - -AC_CACHE_VAL(ac_cv_have_qt, -[#try to guess Qt locations - -qt_incdirs="" -for dir in $kde_qt_dirs; do - qt_incdirs="$qt_incdirs $dir/include $dir" -done -qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes" -if test ! "$ac_qt_includes" = "NO"; then - qt_incdirs="$ac_qt_includes $qt_incdirs" -fi - -if test "$kde_qtver" != "1"; then - kde_qt_header=qstyle.h -else - kde_qt_header=qglobal.h -fi - -AC_FIND_FILE($kde_qt_header, $qt_incdirs, qt_incdir) -ac_qt_includes="$qt_incdir" - -qt_libdirs="" -for dir in $kde_qt_dirs; do - qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir" -done -qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries" -if test ! "$ac_qt_libraries" = "NO"; then - qt_libdir=$ac_qt_libraries -else - qt_libdirs="$ac_qt_libraries $qt_libdirs" - # if the Qt was given, the chance is too big that libqt.* doesn't exist - qt_libdir=NONE - for dir in $qt_libdirs; do - try="ls -1 $dir/${LIBQT_GLOB}" - if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done -fi -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIBQT="$LIBQT ${kde_int_qt}_incremental" - break - fi -done - -ac_qt_libraries="$qt_libdir" - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - -ac_cxxflags_safe="$CXXFLAGS" -ac_ldflags_safe="$LDFLAGS" -ac_libs_safe="$LIBS" - -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" -LIBS="$LIBS $LIBQT $KDE_MT_LIBS" - -KDE_PRINT_QT_PROGRAM - -if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* -else - echo "configure: failed program was:" >&AC_FD_CC - cat conftest.$ac_ext >&AC_FD_CC - ac_qt_libraries="NO" -fi -rm -f conftest* -CXXFLAGS="$ac_cxxflags_safe" -LDFLAGS="$ac_ldflags_safe" -LIBS="$ac_libs_safe" - -AC_LANG_RESTORE -if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then - ac_cv_have_qt="have_qt=no" - ac_qt_notfound="" - missing_qt_mt="" - if test "$ac_qt_includes" = NO; then - if test "$ac_qt_libraries" = NO; then - ac_qt_notfound="(headers and libraries)"; - else - ac_qt_notfound="(headers)"; - fi - else - if test "x$kde_use_qt_mt" = "xyes"; then - missing_qt_mt=" -Make sure that you have compiled Qt with thread support!" - ac_qt_notfound="(library $qtlib-mt)"; - else - ac_qt_notfound="(library $qtlib)"; - fi - fi - - AC_MSG_ERROR([Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation! -For more details about this problem, look at the end of config.log.$missing_qt_mt]) -else - have_qt="yes" -fi -]) - -eval "$ac_cv_have_qt" - -if test "$have_qt" != yes; then - AC_MSG_RESULT([$have_qt]); -else - ac_cv_have_qt="have_qt=yes \ - ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries" - AC_MSG_RESULT([libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT]) - - qt_libraries="$ac_qt_libraries" - qt_includes="$ac_qt_includes" -fi - -if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then - KDE_CHECK_QT_DIRECT(qt_libraries= ,[]) -fi - -AC_SUBST(qt_libraries) -AC_SUBST(qt_includes) - -if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then - QT_INCLUDES="" -else - QT_INCLUDES="-I$qt_includes" - all_includes="$QT_INCLUDES $all_includes" -fi - -if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then - QT_LDFLAGS="" -else - QT_LDFLAGS="-L$qt_libraries" - all_libraries="$QT_LDFLAGS $all_libraries" -fi -test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS" - -AC_SUBST(QT_INCLUDES) -AC_SUBST(QT_LDFLAGS) -AC_PATH_QT_MOC_UIC - -KDE_CHECK_QT_JPEG - -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)' -else -LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)' -fi -test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS" -for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do - if test -e "$a"; then - LIB_QT="$LIB_QT ${kde_int_qt}_incremental" - break - fi -done - -AC_SUBST(LIB_QT) -AC_SUBST(LIB_QPE) - -AC_SUBST(kde_qtver) -]) - -AC_DEFUN([AC_PATH_QT], -[ -AC_PATH_QT_1_3 -]) - -AC_DEFUN([KDE_CHECK_UIC_PLUGINS], -[ -AC_REQUIRE([AC_PATH_QT_MOC_UIC]) - -if test x$ac_uic_supports_libpath = xyes; then - -AC_MSG_CHECKING([if UIC has KDE plugins available]) -AC_CACHE_VAL(kde_cv_uic_plugins, -[ -cat > actest.ui << EOF - -NewConnectionDialog - - - - testInput - - - - -EOF - - - -kde_cv_uic_plugins=no -kde_line="$UIC_PATH -L $kde_widgetdir" -if test x$ac_uic_supports_nounload = xyes; then - kde_line="$kde_line -nounload" -fi -kde_line="$kde_line -impl actest.h actest.ui > actest.cpp" -if AC_TRY_EVAL(kde_line); then - # if you're trying to debug this check and think it's incorrect, - # better check your installation. The check _is_ correct - your - # installation is not. - if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then - kde_cv_uic_plugins=yes - fi -fi -rm -f actest.ui actest.cpp -]) - -AC_MSG_RESULT([$kde_cv_uic_plugins]) -if test "$kde_cv_uic_plugins" != yes; then - AC_MSG_ERROR([ -you need to install kdelibs first. - -If you did install kdelibs, then the Qt version that is picked up by -this configure is not the same version you used to compile kdelibs. -The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the -_same Qt version_, compiled with the _same compiler_ and the same Qt -configuration settings. -]) -fi -fi -]) - -AC_DEFUN([KDE_CHECK_FINAL], -[ - AC_ARG_ENABLE(final, - AC_HELP_STRING([--enable-final], - [build size optimized apps (experimental - needs lots of memory)]), - kde_use_final=$enableval, kde_use_final=no) - - if test "x$kde_use_final" = "xyes"; then - KDE_USE_FINAL_TRUE="" - KDE_USE_FINAL_FALSE="#" - else - KDE_USE_FINAL_TRUE="#" - KDE_USE_FINAL_FALSE="" - fi - AC_SUBST(KDE_USE_FINAL_TRUE) - AC_SUBST(KDE_USE_FINAL_FALSE) -]) - -AC_DEFUN([KDE_CHECK_CLOSURE], -[ - AC_ARG_ENABLE(closure, - AC_HELP_STRING([--enable-closure],[delay template instantiation]), - kde_use_closure=$enableval, kde_use_closure=no) - - KDE_NO_UNDEFINED="" - if test "x$kde_use_closure" = "xyes"; then - KDE_USE_CLOSURE_TRUE="" - KDE_USE_CLOSURE_FALSE="#" -# CXXFLAGS="$CXXFLAGS $REPO" - else - KDE_USE_CLOSURE_TRUE="#" - KDE_USE_CLOSURE_FALSE="" - KDE_NO_UNDEFINED="" - case $host in - *-*-linux-gnu) - KDE_CHECK_COMPILER_FLAG([Wl,--no-undefined], - [KDE_CHECK_COMPILER_FLAG([Wl,--allow-shlib-undefined], - [KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"], - [KDE_NO_UNDEFINED=""])], - [KDE_NO_UNDEFINED=""]) - ;; - esac - fi - AC_SUBST(KDE_USE_CLOSURE_TRUE) - AC_SUBST(KDE_USE_CLOSURE_FALSE) - AC_SUBST(KDE_NO_UNDEFINED) -]) - -dnl Check if the linker supports --enable-new-dtags and --as-needed -AC_DEFUN([KDE_CHECK_NEW_LDFLAGS], -[ - AC_ARG_ENABLE(new_ldflags, - AC_HELP_STRING([--enable-new-ldflags], - [enable the new linker flags]), - kde_use_new_ldflags=$enableval, - kde_use_new_ldflags=no) - - LDFLAGS_AS_NEEDED="" - LDFLAGS_NEW_DTAGS="" - if test "x$kde_use_new_ldflags" = "xyes"; then - LDFLAGS_NEW_DTAGS="" - KDE_CHECK_COMPILER_FLAG([Wl,--enable-new-dtags], - [LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"],) - - KDE_CHECK_COMPILER_FLAG([Wl,--as-needed], - [LDFLAGS_AS_NEEDED="-Wl,--as-needed"],) - fi - AC_SUBST(LDFLAGS_AS_NEEDED) - AC_SUBST(LDFLAGS_NEW_DTAGS) -]) - -AC_DEFUN([KDE_CHECK_NMCHECK], -[ - AC_ARG_ENABLE(nmcheck,AC_HELP_STRING([--enable-nmcheck],[enable automatic namespace cleanness check]), - kde_use_nmcheck=$enableval, kde_use_nmcheck=no) - - if test "$kde_use_nmcheck" = "yes"; then - KDE_USE_NMCHECK_TRUE="" - KDE_USE_NMCHECK_FALSE="#" - else - KDE_USE_NMCHECK_TRUE="#" - KDE_USE_NMCHECK_FALSE="" - fi - AC_SUBST(KDE_USE_NMCHECK_TRUE) - AC_SUBST(KDE_USE_NMCHECK_FALSE) -]) - -AC_DEFUN([KDE_EXPAND_MAKEVAR], [ -savex=$exec_prefix -test "x$exec_prefix" = xNONE && exec_prefix=$prefix -tmp=$$2 -while $1=`eval echo "$tmp"`; test "x$$1" != "x$tmp"; do tmp=$$1; done -exec_prefix=$savex -]) - -dnl ------------------------------------------------------------------------ -dnl Now, the same with KDE -dnl $(KDE_LDFLAGS) will be the kdeliblocation (if needed) -dnl and $(kde_includes) will be the kdehdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_BASE_PATH_KDE], -[ -AC_REQUIRE([KDE_CHECK_STL]) -AC_REQUIRE([AC_PATH_QT])dnl -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_CHECK_RPATH -AC_MSG_CHECKING([for KDE]) - -if test "${prefix}" != NONE; then - kde_includes=${includedir} - KDE_EXPAND_MAKEVAR(ac_kde_includes, includedir) - - kde_libraries=${libdir} - KDE_EXPAND_MAKEVAR(ac_kde_libraries, libdir) - -else - ac_kde_includes= - ac_kde_libraries= - kde_libraries="" - kde_includes="" -fi - -AC_CACHE_VAL(ac_cv_have_kde, -[#try to guess kde locations - -if test "$kde_qtver" = 1; then - kde_check_header="ksock.h" - kde_check_lib="libkdecore.la" -else - kde_check_header="ksharedptr.h" - kde_check_lib="libkio.la" -fi - -if test -z "$1"; then - -kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes" -test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs" -kde_incdirs="$ac_kde_includes $kde_incdirs" -AC_FIND_FILE($kde_check_header, $kde_incdirs, kde_incdir) -ac_kde_includes="$kde_incdir" - -if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then - AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE headers installed. This will fail. -So, check this please and use another prefix!]) -fi - -kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}" -test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs" -kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs" -AC_FIND_FILE($kde_check_lib, $kde_libdirs, kde_libdir) -ac_kde_libraries="$kde_libdir" - -kde_widgetdir=NO -dnl this might be somewhere else -AC_FIND_FILE("kde3/plugins/designer/kdewidgets.la", $kde_libdirs, kde_widgetdir) - -if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then -AC_MSG_ERROR([ -in the prefix, you've chosen, are no KDE libraries installed. This will fail. -So, check this please and use another prefix!]) -fi - -if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then -AC_MSG_ERROR([ -I can't find the designer plugins. These are required and should have been installed -by kdelibs]) -fi - -if test -n "$kde_widgetdir"; then - kde_widgetdir="$kde_widgetdir/kde3/plugins/designer" -fi - - -if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then - ac_cv_have_kde="have_kde=no" -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" -fi - -else dnl test -z $1, e.g. from kdelibs - - ac_cv_have_kde="have_kde=no" - -fi -])dnl - -eval "$ac_cv_have_kde" - -if test "$have_kde" != "yes"; then - if test "${prefix}" = NONE; then - ac_kde_prefix="$ac_default_prefix" - else - ac_kde_prefix="$prefix" - fi - if test "$exec_prefix" = NONE; then - ac_kde_exec_prefix="$ac_kde_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix]) - else - ac_kde_exec_prefix="$exec_prefix" - AC_MSG_RESULT([will be installed in $ac_kde_prefix and $ac_kde_exec_prefix]) - fi - - kde_libraries="${libdir}" - kde_includes="${includedir}" - -else - ac_cv_have_kde="have_kde=yes \ - ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries" - AC_MSG_RESULT([libraries $ac_kde_libraries, headers $ac_kde_includes]) - - kde_libraries="$ac_kde_libraries" - kde_includes="$ac_kde_includes" -fi -AC_SUBST(kde_libraries) -AC_SUBST(kde_includes) - -if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then - KDE_INCLUDES="" -else - KDE_INCLUDES="-I$kde_includes" - all_includes="$KDE_INCLUDES $all_includes" -fi - -KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION" - -KDE_LDFLAGS="-L$kde_libraries" -if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then - all_libraries="$KDE_LDFLAGS $all_libraries" -fi - -AC_SUBST(KDE_LDFLAGS) -AC_SUBST(KDE_INCLUDES) - -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -all_libraries="$all_libraries $USER_LDFLAGS" -all_includes="$all_includes $USER_INCLUDES" -AC_SUBST(all_includes) -AC_SUBST(all_libraries) - -if test -z "$1"; then -KDE_CHECK_UIC_PLUGINS -fi - -ac_kde_libraries="$kde_libdir" - -AC_SUBST(AUTODIRS) - - -]) - -AC_DEFUN([KDE_CHECK_EXTRA_LIBS], -[ -AC_MSG_CHECKING(for extra includes) -AC_ARG_WITH(extra-includes,AC_HELP_STRING([--with-extra-includes=DIR],[adds non standard include paths]), - kde_use_extra_includes="$withval", - kde_use_extra_includes=NONE -) -kde_extra_includes= -if test -n "$kde_use_extra_includes" && \ - test "$kde_use_extra_includes" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_includes; do - kde_extra_includes="$kde_extra_includes $dir" - USER_INCLUDES="$USER_INCLUDES -I$dir" - done - IFS=$ac_save_ifs - kde_use_extra_includes="added" -else - kde_use_extra_includes="no" -fi -AC_SUBST(USER_INCLUDES) - -AC_MSG_RESULT($kde_use_extra_includes) - -kde_extra_libs= -AC_MSG_CHECKING(for extra libs) -AC_ARG_WITH(extra-libs,AC_HELP_STRING([--with-extra-libs=DIR],[adds non standard library paths]), - kde_use_extra_libs=$withval, - kde_use_extra_libs=NONE -) -if test -n "$kde_use_extra_libs" && \ - test "$kde_use_extra_libs" != "NONE"; then - - ac_save_ifs=$IFS - IFS=':' - for dir in $kde_use_extra_libs; do - kde_extra_libs="$kde_extra_libs $dir" - KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir" - USER_LDFLAGS="$USER_LDFLAGS -L$dir" - done - IFS=$ac_save_ifs - kde_use_extra_libs="added" -else - kde_use_extra_libs="no" -fi - -AC_SUBST(USER_LDFLAGS) - -AC_MSG_RESULT($kde_use_extra_libs) - -]) - -AC_DEFUN([KDE_1_CHECK_PATH_HEADERS], -[ - AC_MSG_CHECKING([for KDE headers installed]) - AC_LANG_SAVE - AC_LANG_CPLUSPLUS -cat > conftest.$ac_ext < -#endif -#include -#include "confdefs.h" -#include - -int main() { - printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data()); - printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data()); - printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data()); - printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data()); - printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data()); - printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data()); - printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data()); - printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data()); - printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data()); - printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data()); - printf("kde_wallpaperdir=\\"%s\\"\n", - KApplication::kde_wallpaperdir().data()); - printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data()); - printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data()); - printf("kde_servicesdir=\\"/tmp/dummy\\"\n"); - printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n"); - printf("kde_moduledir=\\"/tmp/dummy\\"\n"); - printf("kde_styledir=\\"/tmp/dummy\\"\n"); - printf("kde_widgetdir=\\"/tmp/dummy\\"\n"); - printf("xdg_appsdir=\\"/tmp/dummy\\"\n"); - printf("xdg_menudir=\\"/tmp/dummy\\"\n"); - printf("xdg_directorydir=\\"/tmp/dummy\\"\n"); - printf("kde_kcfgdir=\\"/tmp/dummy\\"\n"); - return 0; - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - CPPFLAGS="$all_includes $CPPFLAGS" - if AC_TRY_EVAL(ac_compile); then - AC_MSG_RESULT(yes) - else - AC_MSG_ERROR([your system is not able to compile a small KDE application! -Check, if you installed the KDE header files correctly. -For more details about this problem, look at the end of config.log.]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_CHECK_KDEQTADDON], -[ -AC_MSG_CHECKING(for kde-qt-addon) -AC_CACHE_VAL(kde_cv_have_kdeqtaddon, -[ - kde_ldflags_safe="$LDFLAGS" - kde_libs_safe="$LIBS" - kde_cxxflags_safe="$CXXFLAGS" - - LIBS="-lkde-qt-addon $LIBQT $LIBS" - CXXFLAGS="$CXXFLAGS -I$prefix/include -I$prefix/include/kde $all_includes" - LDFLAGS="$LDFLAGS $all_libraries $USER_LDFLAGS" - - AC_TRY_LINK([ - #include - ], - [ - QDomDocument doc; - ], - kde_cv_have_kdeqtaddon=yes, - kde_cv_have_kdeqtaddon=no - ) - - LDFLAGS=$kde_ldflags_safe - LIBS=$kde_libs_safe - CXXFLAGS=$kde_cxxflags_safe -]) - -AC_MSG_RESULT($kde_cv_have_kdeqtaddon) - -if test "$kde_cv_have_kdeqtaddon" = "no"; then - AC_MSG_ERROR([Can't find libkde-qt-addon. You need to install it first. -It is a separate package (and CVS module) named kde-qt-addon.]) -fi -]) - -AC_DEFUN([KDE_CREATE_LIBS_ALIASES], -[ - AC_REQUIRE([KDE_MISC_TESTS]) - AC_REQUIRE([KDE_CHECK_LIBDL]) - AC_REQUIRE([K_PATH_X]) - -if test $kde_qtver = 3; then - case $host in - *cygwin*) lib_kded="-lkdeinit_kded" ;; - *) lib_kded="" ;; - esac - AC_SUBST(LIB_KDED, $lib_kded) - AC_SUBST(LIB_KDECORE, "-lkdecore") - AC_SUBST(LIB_KDEUI, "-lkdeui") - AC_SUBST(LIB_KIO, "-lkio") - AC_SUBST(LIB_KJS, "-lkjs") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KABC, "-lkabc") - AC_SUBST(LIB_KHTML, "-lkhtml") - AC_SUBST(LIB_KSPELL, "-lkspell") - AC_SUBST(LIB_KPARTS, "-lkparts") - AC_SUBST(LIB_KDEPRINT, "-lkdeprint") - AC_SUBST(LIB_KUTILS, "-lkutils") - AC_SUBST(LIB_KDEPIM, "-lkdepim") - AC_SUBST(LIB_KIMPROXY, "-lkimproxy") - AC_SUBST(LIB_KNEWSTUFF, "-lknewstuff") - AC_SUBST(LIB_KDNSSD, "-lkdnssd") - AC_SUBST(LIB_KUNITTEST, "-lkunittest") -# these are for backward compatibility - AC_SUBST(LIB_KSYCOCA, "-lkio") - AC_SUBST(LIB_KFILE, "-lkio") -elif test $kde_qtver = 2; then - AC_SUBST(LIB_KDECORE, "-lkdecore") - AC_SUBST(LIB_KDEUI, "-lkdeui") - AC_SUBST(LIB_KIO, "-lkio") - AC_SUBST(LIB_KSYCOCA, "-lksycoca") - AC_SUBST(LIB_SMB, "-lsmb") - AC_SUBST(LIB_KFILE, "-lkfile") - AC_SUBST(LIB_KAB, "-lkab") - AC_SUBST(LIB_KHTML, "-lkhtml") - AC_SUBST(LIB_KSPELL, "-lkspell") - AC_SUBST(LIB_KPARTS, "-lkparts") - AC_SUBST(LIB_KDEPRINT, "-lkdeprint") -else - AC_SUBST(LIB_KDECORE, "-lkdecore -lXext $(LIB_QT)") - AC_SUBST(LIB_KDEUI, "-lkdeui $(LIB_KDECORE)") - AC_SUBST(LIB_KFM, "-lkfm $(LIB_KDECORE)") - AC_SUBST(LIB_KFILE, "-lkfile $(LIB_KFM) $(LIB_KDEUI)") - AC_SUBST(LIB_KAB, "-lkab $(LIB_KIMGIO) $(LIB_KDECORE)") -fi -]) - -AC_DEFUN([AC_PATH_KDE], -[ - AC_BASE_PATH_KDE - AC_ARG_ENABLE(path-check,AC_HELP_STRING([--disable-path-check],[don't try to find out, where to install]), - [ - if test "$enableval" = "no"; - then ac_use_path_checking="default" - else ac_use_path_checking="" - fi - ], - [ - if test "$kde_qtver" = 1; - then ac_use_path_checking="" - else ac_use_path_checking="default" - fi - ] - ) - - AC_CREATE_KFSSTND($ac_use_path_checking) - - AC_SUBST_KFSSTND - KDE_CREATE_LIBS_ALIASES -]) - -dnl KDE_CHECK_FUNC_EXT(, [headers], [sample-use], [C prototype], [autoheader define], [call if found]) -AC_DEFUN([KDE_CHECK_FUNC_EXT], -[ -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(kde_cv_func_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -save_CXXFLAGS="$CXXFLAGS" -kde_safe_LIBS="$LIBS" -LIBS="$LIBS $X_EXTRA_LIBS" -if test "$GXX" = "yes"; then -CXXFLAGS="$CXXFLAGS -pedantic-errors" -fi -AC_TRY_COMPILE([ -$2 -], -[ -$3 -], -kde_cv_func_$1=yes, -kde_cv_func_$1=no) -CXXFLAGS="$save_CXXFLAGS" -LIBS="$kde_safe_LIBS" -AC_LANG_RESTORE -]) - -AC_MSG_RESULT($kde_cv_func_$1) - -AC_MSG_CHECKING([if $1 needs custom prototype]) -AC_CACHE_VAL(kde_cv_proto_$1, -[ -if test "x$kde_cv_func_$1" = xyes; then - kde_cv_proto_$1=no -else - case "$1" in - setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat) - kde_cv_proto_$1="yes - in libkdefakes" - ;; - *) - kde_cv_proto_$1=unknown - ;; - esac -fi - -if test "x$kde_cv_proto_$1" = xunknown; then - -AC_LANG_SAVE -AC_LANG_CPLUSPLUS - kde_safe_libs=$LIBS - LIBS="$LIBS $X_EXTRA_LIBS" - AC_TRY_LINK([ -$2 - -extern "C" $4; -], -[ -$3 -], -[ kde_cv_func_$1=yes - kde_cv_proto_$1=yes ], - [kde_cv_proto_$1="$1 unavailable"] -) -LIBS=$kde_safe_libs -AC_LANG_RESTORE -fi -]) -AC_MSG_RESULT($kde_cv_proto_$1) - -if test "x$kde_cv_func_$1" = xyes; then - AC_DEFINE(HAVE_$5, 1, [Define if you have $1]) - $6 -fi -if test "x$kde_cv_proto_$1" = xno; then - AC_DEFINE(HAVE_$5_PROTO, 1, - [Define if you have the $1 prototype]) -fi - -AH_VERBATIM([_HAVE_$5_PROTO], -[ -#if !defined(HAVE_$5_PROTO) -#ifdef __cplusplus -extern "C" { -#endif -$4; -#ifdef __cplusplus -} -#endif -#endif -]) -]) - -AC_DEFUN([AC_CHECK_SETENV], -[ - KDE_CHECK_FUNC_EXT(setenv, [ -#include -], - [setenv("VAR", "VALUE", 1);], - [int setenv (const char *, const char *, int)], - [SETENV]) -]) - -AC_DEFUN([AC_CHECK_UNSETENV], -[ - KDE_CHECK_FUNC_EXT(unsetenv, [ -#include -], - [unsetenv("VAR");], - [void unsetenv (const char *)], - [UNSETENV]) -]) - -AC_DEFUN([AC_CHECK_GETDOMAINNAME], -[ - KDE_CHECK_FUNC_EXT(getdomainname, [ -#include -#include -#include -], - [ -char buffer[200]; -getdomainname(buffer, 200); -], - [#include - int getdomainname (char *, size_t)], - [GETDOMAINNAME]) -]) - -AC_DEFUN([AC_CHECK_GETHOSTNAME], -[ - KDE_CHECK_FUNC_EXT(gethostname, [ -#include -#include -], - [ -char buffer[200]; -gethostname(buffer, 200); -], - [int gethostname (char *, unsigned int)], - [GETHOSTNAME]) -]) - -AC_DEFUN([AC_CHECK_USLEEP], -[ - KDE_CHECK_FUNC_EXT(usleep, [ -#include -], - [ -usleep(200); -], - [int usleep (unsigned int)], - [USLEEP]) -]) - - -AC_DEFUN([AC_CHECK_RANDOM], -[ - KDE_CHECK_FUNC_EXT(random, [ -#include -], - [ -random(); -], - [long int random(void)], - [RANDOM]) - - KDE_CHECK_FUNC_EXT(srandom, [ -#include -], - [ -srandom(27); -], - [void srandom(unsigned int)], - [SRANDOM]) - -]) - -AC_DEFUN([AC_CHECK_INITGROUPS], -[ - KDE_CHECK_FUNC_EXT(initgroups, [ -#include -#include -#include -], - [ -char buffer[200]; -initgroups(buffer, 27); -], - [int initgroups(const char *, gid_t)], - [INITGROUPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMPS], -[ - KDE_CHECK_FUNC_EXT(mkstemps, [ -#include -#include -], - [ -mkstemps("/tmp/aaaXXXXXX", 6); -], - [int mkstemps(char *, int)], - [MKSTEMPS]) -]) - -AC_DEFUN([AC_CHECK_MKSTEMP], -[ - KDE_CHECK_FUNC_EXT(mkstemp, [ -#include -#include -], - [ -mkstemp("/tmp/aaaXXXXXX"); -], - [int mkstemp(char *)], - [MKSTEMP]) -]) - -AC_DEFUN([AC_CHECK_MKDTEMP], -[ - KDE_CHECK_FUNC_EXT(mkdtemp, [ -#include -#include -], - [ -mkdtemp("/tmp/aaaXXXXXX"); -], - [char *mkdtemp(char *)], - [MKDTEMP]) -]) - - -AC_DEFUN([AC_CHECK_RES_INIT], -[ - AC_MSG_CHECKING([if res_init needs -lresolv]) - kde_libs_safe="$LIBS" - LIBS="$LIBS $X_EXTRA_LIBS -lresolv" - AC_TRY_LINK( - [ -#include -#include -#include -#include - ], - [ - res_init(); - ], - [ - LIBRESOLV="-lresolv" - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_RES_INIT, 1, [Define if you have the res_init function]) - ], - [ AC_MSG_RESULT(no) ] - ) - LIBS=$kde_libs_safe - AC_SUBST(LIBRESOLV) - - KDE_CHECK_FUNC_EXT(res_init, - [ -#include -#include -#include -#include - ], - [res_init()], - [int res_init(void)], - [RES_INIT]) -]) - -AC_DEFUN([AC_CHECK_STRLCPY], -[ - KDE_CHECK_FUNC_EXT(strlcpy, [ -#include -], -[ char buf[20]; - strlcpy(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcpy(char*, const char*, unsigned long)], - [STRLCPY]) -]) - -AC_DEFUN([AC_CHECK_STRLCAT], -[ - KDE_CHECK_FUNC_EXT(strlcat, [ -#include -], -[ char buf[20]; - buf[0]='\0'; - strlcat(buf, "KDE function test", sizeof(buf)); -], - [unsigned long strlcat(char*, const char*, unsigned long)], - [STRLCAT]) -]) - -AC_DEFUN([AC_CHECK_RES_QUERY], -[ - KDE_CHECK_FUNC_EXT(res_query, [ -#include -#include -#include -#include -#include -], -[ -res_query(NULL, 0, 0, NULL, 0); -], - [int res_query(const char *, int, int, unsigned char *, int)], - [RES_QUERY]) -]) - -AC_DEFUN([AC_CHECK_DN_SKIPNAME], -[ - KDE_CHECK_FUNC_EXT(dn_skipname, [ -#include -#include -#include -#include -], -[ -dn_skipname (NULL, NULL); -], - [int dn_skipname (unsigned char *, unsigned char *)], - [DN_SKIPNAME]) -]) - - -AC_DEFUN([AC_FIND_GIF], - [AC_MSG_CHECKING([for giflib]) -AC_CACHE_VAL(ac_cv_lib_gif, -[ac_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries -lgif -lX11 $LIBSOCKET" -else -LIBS="$all_libraries -lgif" -fi -AC_TRY_LINK(dnl -[ -#ifdef __cplusplus -extern "C" { -#endif -int GifLastError(void); -#ifdef __cplusplus -} -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -], - [return GifLastError();], - eval "ac_cv_lib_gif=yes", - eval "ac_cv_lib_gif=no") -LIBS="$ac_save_LIBS" -])dnl -if eval "test \"`echo $ac_cv_lib_gif`\" = yes"; then - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBGIF, 1, [Define if you have libgif]) -else - AC_MSG_ERROR(You need giflib30. Please install the kdesupport package) -fi -]) - -AC_DEFUN([KDE_FIND_JPEG_HELPER], -[ -AC_MSG_CHECKING([for libjpeg$2]) -AC_CACHE_VAL(ac_cv_lib_jpeg_$1, -[ -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -ljpeg$2 -lm" -ac_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[ -#ifdef __cplusplus -extern "C" { -#endif -void jpeg_CreateDecompress(); -#ifdef __cplusplus -} -#endif -], -[jpeg_CreateDecompress();], - eval "ac_cv_lib_jpeg_$1=-ljpeg$2", - eval "ac_cv_lib_jpeg_$1=no") -LIBS="$ac_save_LIBS" -CFLAGS="$ac_save_CFLAGS" -]) - -if eval "test ! \"`echo $ac_cv_lib_jpeg_$1`\" = no"; then - LIBJPEG="$ac_cv_lib_jpeg_$1" - AC_MSG_RESULT($ac_cv_lib_jpeg_$1) -else - AC_MSG_RESULT(no) - $3 -fi - -]) - -AC_DEFUN([AC_FIND_JPEG], -[ -dnl first look for libraries -KDE_FIND_JPEG_HELPER(6b, 6b, - KDE_FIND_JPEG_HELPER(normal, [], - [ - LIBJPEG= - ] - ) -) - -dnl then search the headers (can't use simply AC_TRY_xxx, as jpeglib.h -dnl requires system dependent includes loaded before it) -jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes" -AC_FIND_FILE(jpeglib.h, $jpeg_incdirs, jpeg_incdir) -test "x$jpeg_incdir" = xNO && jpeg_incdir= - -dnl if headers _and_ libraries are missing, this is no error, and we -dnl continue with a warning (the user will get no jpeg support in khtml) -dnl if only one is missing, it means a configuration error, but we still -dnl only warn -if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then - AC_DEFINE_UNQUOTED(HAVE_LIBJPEG, 1, [Define if you have libjpeg]) -else - if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then - AC_MSG_WARN([ -There is an installation error in jpeg support. You seem to have only one -of either the headers _or_ the libraries installed. You may need to either -provide correct --with-extra-... options, or the development package of -libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/ -Disabling JPEG support. -]) - else - AC_MSG_WARN([libjpeg not found. disable JPEG support.]) - fi - jpeg_incdir= - LIBJPEG= -fi - -AC_SUBST(LIBJPEG) -AH_VERBATIM(_AC_CHECK_JPEG, -[/* - * jpeg.h needs HAVE_BOOLEAN, when the system uses boolean in system - * headers and I'm too lazy to write a configure test as long as only - * unixware is related - */ -#ifdef _UNIXWARE -#define HAVE_BOOLEAN -#endif -]) -]) - -AC_DEFUN([KDE_CHECK_QT_JPEG], -[ -if test -n "$LIBJPEG"; then -AC_MSG_CHECKING([if Qt needs $LIBJPEG]) -AC_CACHE_VAL(kde_cv_qt_jpeg, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS $LIBQT" -LIBS=`echo $LIBS | sed "s/$LIBJPEG//"` -ac_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK( -[#include ], - [ - int argc; - char** argv; - QApplication app(argc, argv);], - eval "kde_cv_qt_jpeg=no", - eval "kde_cv_qt_jpeg=yes") -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -fi -]) - -if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then - AC_MSG_RESULT(yes) - LIBJPEG_QT='$(LIBJPEG)' -else - AC_MSG_RESULT(no) - LIBJPEG_QT= -fi - -]) - -AC_DEFUN([AC_FIND_ZLIB], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for libz]) -AC_CACHE_VAL(ac_cv_lib_z, -[ -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#include -], -[ - char buf[42]; - gzFile f = (gzFile) 0; - /* this would segfault.. but we only link, don't run */ - (void) gzgets(f, buf, sizeof(buf)); - - return (zlibVersion() == ZLIB_VERSION); -], - eval "ac_cv_lib_z='-lz'", - eval "ac_cv_lib_z=no") -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if test ! "$ac_cv_lib_z" = no; then - AC_DEFINE_UNQUOTED(HAVE_LIBZ, 1, [Define if you have libz]) - LIBZ="$ac_cv_lib_z" - AC_MSG_RESULT($ac_cv_lib_z) -else - AC_MSG_ERROR(not found. - Possibly configure picks up an outdated version - installed by XFree86. Remove it from your system. - - Check your installation and look into config.log) - LIBZ="" -fi -AC_SUBST(LIBZ) -]) - -AC_DEFUN([KDE_TRY_TIFFLIB], -[ -AC_MSG_CHECKING([for libtiff $1]) - -AC_CACHE_VAL(kde_cv_libtiff_$1, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lX11 $LIBSOCKET -lm" -else -LIBS="$all_libraries $USER_LDFLAGS -l$1 $LIBJPEG $LIBZ -lm" -fi -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl -[ -#include -], - [return (TIFFOpen( "", "r") == 0); ], -[ - kde_cv_libtiff_$1="-l$1 $LIBJPEG $LIBZ" -], [ - kde_cv_libtiff_$1=no -]) - -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -]) - -if test "$kde_cv_libtiff_$1" = "no"; then - AC_MSG_RESULT(no) - LIBTIFF="" - $3 -else - LIBTIFF="$kde_cv_libtiff_$1" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_LIBTIFF, 1, [Define if you have libtiff]) - $2 -fi - -]) - -AC_DEFUN([AC_FIND_TIFF], -[ -AC_REQUIRE([K_PATH_X]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - -KDE_TRY_TIFFLIB(tiff, [], - KDE_TRY_TIFFLIB(tiff34)) - -AC_SUBST(LIBTIFF) -]) - -AC_DEFUN([KDE_FIND_LIBEXR], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_CACHE_VAL(ac_cv_libexr, -[ - if test -z "$PKG_CONFIG"; then - AC_PATH_PROG(PKG_CONFIG, pkg-config, no) - fi - - AC_MSG_CHECKING([for OpenEXR libraries]) - - if test "$PKG_CONFIG" = "no" ; then - AC_MSG_RESULT(no) - echo "*** The pkg-config script could not be found. Make sure it is" - echo "*** in your path, or set the PKG_CONFIG environment variable" - echo "*** to the full path to pkg-config." - echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config." - else - if !(`$PKG_CONFIG --exists OpenEXR`) ; then - AC_MSG_RESULT(no) - EXRSTATUS=no - else - if !(`$PKG_CONFIG --atleast-version="1.1.1" OpenEXR`) ; then - AC_MSG_RESULT(no) - EXRSTATUS=old - else - kde_save_LIBS="$LIBS" - LIBS="$LIBS $all_libraries $USER_LDFLAGS `pkg-config --libs OpenEXR` $LIBZ" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_CXXFLAGS="$CXXFLAGS" - EXR_FLAGS=`$PKG_CONFIG --cflags OpenEXR` - CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES $EXR_FLAGS" - - AC_TRY_LINK(dnl - [ - #include - ], - [ - using namespace Imf; - RgbaInputFile file ("dummy"); - return 0; - ], - eval "ac_cv_libexr='`pkg-config --libs OpenEXR`'", - eval "ac_cv_libexr=no" - ) - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - if eval "test ! \"`echo $ac_cv_libexr`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_EXR, 1, [Define if you have OpenEXR]) - LIB_EXR="$ac_cv_libexr" - AC_MSG_RESULT($ac_cv_libexr) - else - AC_MSG_RESULT(no) - LIB_EXR="" - fi - fi - fi - fi - AC_SUBST(LIB_EXR) - AC_SUBST(EXR_FLAGS) -]) - - - -AC_DEFUN([AC_FIND_PNG], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_ZLIB]) -AC_MSG_CHECKING([for libpng]) -AC_CACHE_VAL(ac_cv_lib_png, -[ -kde_save_LIBS="$LIBS" -if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET" -else -LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm" -fi -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - png_structp png_ptr = png_create_read_struct( /* image ptr */ - PNG_LIBPNG_VER_STRING, 0, 0, 0 ); - return( png_ptr != 0 ); - ], - eval "ac_cv_lib_png='-lpng $LIBZ -lm'", - eval "ac_cv_lib_png=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_LIBPNG, 1, [Define if you have libpng]) - LIBPNG="$ac_cv_lib_png" - AC_SUBST(LIBPNG) - AC_MSG_RESULT($ac_cv_lib_png) -else - AC_MSG_RESULT(no) - LIBPNG="" - AC_SUBST(LIBPNG) -fi -]) - - -AC_DEFUN([AC_FIND_JASPER], -[ -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_REQUIRE([AC_FIND_JPEG]) -AC_MSG_CHECKING([for jasper]) -AC_CACHE_VAL(ac_cv_jasper, -[ -kde_save_LIBS="$LIBS" -LIBS="$LIBS $all_libraries $USER_LDFLAGS -ljasper $LIBJPEG -lm" -kde_save_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS $all_includes $USER_INCLUDES" - -AC_TRY_LINK(dnl - [ - #include - ], - [ - return( jas_init() ); - ], - eval "ac_cv_jasper='-ljasper $LIBJPEG -lm'", - eval "ac_cv_jasper=no" -) -LIBS="$kde_save_LIBS" -CFLAGS="$kde_save_CFLAGS" -])dnl -if eval "test ! \"`echo $ac_cv_jasper`\" = no"; then - AC_DEFINE_UNQUOTED(HAVE_JASPER, 1, [Define if you have jasper]) - LIB_JASPER="$ac_cv_jasper" - AC_MSG_RESULT($ac_cv_jasper) -else - AC_MSG_RESULT(no) - LIB_JASPER="" -fi -AC_SUBST(LIB_JASPER) -]) - -AC_DEFUN([AC_CHECK_BOOL], -[ - AC_DEFINE_UNQUOTED(HAVE_BOOL, 1, [You _must_ have bool]) -]) - -AC_DEFUN([AC_CHECK_GNU_EXTENSIONS], -[ -AC_MSG_CHECKING(if you need GNU extensions) -AC_CACHE_VAL(ac_cv_gnu_extensions, -[ -cat > conftest.c << EOF -#include - -#ifdef __GNU_LIBRARY__ -yes -#endif -EOF - -if (eval "$ac_cpp conftest.c") 2>&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_gnu_extensions=yes -else - ac_cv_gnu_extensions=no -fi -]) - -AC_MSG_RESULT($ac_cv_gnu_extensions) -if test "$ac_cv_gnu_extensions" = "yes"; then - AC_DEFINE_UNQUOTED(_GNU_SOURCE, 1, [Define if you need to use the GNU extensions]) -fi -]) - -AC_DEFUN([KDE_CHECK_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CXX supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cxx_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cxx_$kde_cache=yes"], []) - CXXFLAGS="$save_CXXFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - -AC_DEFUN([KDE_CHECK_C_COMPILER_FLAG], -[ -AC_MSG_CHECKING([whether $CC supports -$1]) -kde_cache=`echo $1 | sed 'y% .=/+-,%____p__%'` -AC_CACHE_VAL(kde_cv_prog_cc_$kde_cache, -[ - AC_LANG_SAVE - AC_LANG_C - save_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -$1" - AC_TRY_LINK([],[ return 0; ], [eval "kde_cv_prog_cc_$kde_cache=yes"], []) - CFLAGS="$save_CFLAGS" - AC_LANG_RESTORE -]) -if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then - AC_MSG_RESULT(yes) - : - $2 -else - AC_MSG_RESULT(no) - : - $3 -fi -]) - - -dnl AC_REMOVE_FORBIDDEN removes forbidden arguments from variables -dnl use: AC_REMOVE_FORBIDDEN(CC, [-forbid -bad-option whatever]) -dnl it's all white-space separated -AC_DEFUN([AC_REMOVE_FORBIDDEN], -[ __val=$$1 - __forbid=" $2 " - if test -n "$__val"; then - __new="" - ac_save_IFS=$IFS - IFS=" " - for i in $__val; do - case "$__forbid" in - *" $i "*) AC_MSG_WARN([found forbidden $i in $1, removing it]) ;; - *) # Careful to not add spaces, where there were none, because otherwise - # libtool gets confused, if we change e.g. CXX - if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;; - esac - done - IFS=$ac_save_IFS - $1=$__new - fi -]) - - -AC_DEFUN([KDE_CHECK_FOR_BAD_COMPILER], -[ - AC_MSG_CHECKING([whether $CC is blacklisted]) - - dnl In theory we have tu run this test against $CC and $CXX - dnl in C and in C++ mode, because its perfectly legal for - dnl the user to mix compiler versions, since C has a defined - dnl ABI. - dnl - dnl For now, we assume the user is not on crack. - - AC_TRY_COMPILE([ -#ifdef __GNUC__ -#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0 -choke me -#endif -#endif -], , - kde_bad_compiler=no, - kde_bad_compiler=yes -) - - AC_MSG_RESULT($kde_bad_compiler) - -if test "$kde_bad_compiler" = "yes"; then - AC_MSG_ERROR([ - -This particular compiler version is blacklisted because it -is known to miscompile KDE. Please use a newer version, or -if that is not yet available, choose an older version. - -Please do not report a bug or bother us reporting this -configure error. We know about it, and we introduced -it by intention to avoid untraceable bugs or crashes in KDE. - -]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_FOR_OPT_NOINLINE_MATCH], -[ - AC_CACHE_CHECK([whether system headers can cope with -O2 -fno-inline], - kde_cv_opt_noinline_match, - [ - kde_cv_opt_noinline_match=irrelevant - dnl if we don't use both -O2 and -fno-inline, this check is moot - if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \ - && echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then - - ac_cflags_save="$CFLAGS" - CFLAGS="$CFLAGS -D_USE_GNU" - - AC_TRY_LINK([ - #include -], [ const char *pt, *et; - et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ; -], - kde_cv_opt_noinline_match=yes, - kde_cv_opt_noinline_match=no - ) - - CFLAGS="$ac_cflags_save" - fi - ]) -]) - - -dnl AC_VALIDIFY_CXXFLAGS checks for forbidden flags the user may have given -AC_DEFUN([AC_VALIDIFY_CXXFLAGS], -[dnl -if test "x$kde_use_qt_emb" != "xyes"; then - AC_REMOVE_FORBIDDEN(CXX, [-fno-rtti -rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-fno-rtti -rpath]) -else - AC_REMOVE_FORBIDDEN(CXX, [-rpath]) - AC_REMOVE_FORBIDDEN(CXXFLAGS, [-rpath]) -fi -]) - -AC_DEFUN([AC_CHECK_COMPILERS], -[ - AC_ARG_ENABLE(debug, - AC_HELP_STRING([--enable-debug=ARG],[enables debug symbols (yes|no|full) [default=no]]), - [ - case $enableval in - yes) - kde_use_debug_code="yes" - kde_use_debug_define=no - ;; - full) - kde_use_debug_code="full" - kde_use_debug_define=no - ;; - *) - kde_use_debug_code="no" - kde_use_debug_define=yes - ;; - esac - ], - [kde_use_debug_code="no" - kde_use_debug_define=no - ]) - - dnl Just for configure --help - AC_ARG_ENABLE(dummyoption, - AC_HELP_STRING([--disable-debug], - [disables debug output and debug symbols [default=no]]), - [],[]) - - AC_ARG_ENABLE(strict, - AC_HELP_STRING([--enable-strict], - [compiles with strict compiler options (may not work!)]), - [ - if test $enableval = "no"; then - kde_use_strict_options="no" - else - kde_use_strict_options="yes" - fi - ], [kde_use_strict_options="no"]) - - AC_ARG_ENABLE(warnings,AC_HELP_STRING([--disable-warnings],[disables compilation with -Wall and similar]), - [ - if test $enableval = "no"; then - kde_use_warnings="no" - else - kde_use_warnings="yes" - fi - ], [kde_use_warnings="yes"]) - - dnl enable warnings for debug build - if test "$kde_use_debug_code" != "no"; then - kde_use_warnings=yes - fi - - AC_ARG_ENABLE(profile,AC_HELP_STRING([--enable-profile],[creates profiling infos [default=no]]), - [kde_use_profiling=$enableval], - [kde_use_profiling="no"] - ) - - dnl this prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS - CFLAGS=" $CFLAGS" - - AC_PROG_CC - - AC_PROG_CPP - - if test "$GCC" = "yes"; then - if test "$kde_use_debug_code" != "no"; then - if test $kde_use_debug_code = "full"; then - CFLAGS="-g3 -fno-inline $CFLAGS" - else - CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS" - fi - else - CFLAGS="-O2 $CFLAGS" - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CFLAGS="-DNDEBUG $CFLAGS" - fi - - - case "$host" in - *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";; - *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";; - esac - - if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then - LDFLAGS="" - fi - - CXXFLAGS=" $CXXFLAGS" - - AC_PROG_CXX - - KDE_CHECK_FOR_BAD_COMPILER - - if test "$GXX" = "yes" || test "$CXX" = "KCC"; then - if test "$kde_use_debug_code" != "no"; then - if test "$CXX" = "KCC"; then - CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS" - else - if test "$kde_use_debug_code" = "full"; then - CXXFLAGS="-g3 -fno-inline $CXXFLAGS" - else - CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS" - fi - fi - KDE_CHECK_COMPILER_FLAG(fno-builtin,[CXXFLAGS="-fno-builtin $CXXFLAGS"]) - - dnl convenience compiler flags - KDE_CHECK_COMPILER_FLAG(Woverloaded-virtual, [WOVERLOADED_VIRTUAL="-Woverloaded-virtual"], [WOVERLOADED_VRITUAL=""]) - AC_SUBST(WOVERLOADED_VIRTUAL) - else - if test "$CXX" = "KCC"; then - CXXFLAGS="+K3 $CXXFLAGS" - else - CXXFLAGS="-O2 $CXXFLAGS" - fi - fi - fi - - if test "$kde_use_debug_define" = "yes"; then - CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS" - fi - - if test "$kde_use_profiling" = "yes"; then - KDE_CHECK_COMPILER_FLAG(pg, - [ - CFLAGS="-pg $CFLAGS" - CXXFLAGS="-pg $CXXFLAGS" - ]) - fi - - if test "$kde_use_warnings" = "yes"; then - if test "$GCC" = "yes"; then - CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS" - case $host in - *-*-linux-gnu) - CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS" - CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS" - KDE_CHECK_COMPILER_FLAG(Wmissing-format-attribute, [CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"]) - KDE_CHECK_C_COMPILER_FLAG(Wmissing-format-attribute, [CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"]) - ;; - esac - KDE_CHECK_COMPILER_FLAG(Wundef,[CXXFLAGS="-Wundef $CXXFLAGS"]) - KDE_CHECK_COMPILER_FLAG(Wno-long-long,[CXXFLAGS="-Wno-long-long $CXXFLAGS"]) - dnl ### FIXME: revert for KDE 4 - KDE_CHECK_COMPILER_FLAG(Wno-non-virtual-dtor,[CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"]) - fi - fi - - if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then - CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS" - fi - - AC_ARG_ENABLE(pch, - AC_HELP_STRING([--enable-pch], - [enables precompiled header support (currently only KCC or gcc >=3.4+unsermake) [default=no]]), - [ kde_use_pch=$enableval ],[ kde_use_pch=no ]) - - HAVE_GCC_VISIBILITY=0 - AC_SUBST([HAVE_GCC_VISIBILITY]) - - if test "$GXX" = "yes"; then - gcc_no_reorder_blocks=NO - KDE_CHECK_COMPILER_FLAG(fno-reorder-blocks,[gcc_no_reorder_blocks=YES]) - if test $kde_use_debug_code != "no" && \ - test $kde_use_debug_code != "full" && \ - test "YES" = "$gcc_no_reorder_blocks" ; then - CXXFLAGS="$CXXFLAGS -fno-reorder-blocks" - CFLAGS="$CFLAGS -fno-reorder-blocks" - fi - KDE_CHECK_COMPILER_FLAG(fno-exceptions,[CXXFLAGS="$CXXFLAGS -fno-exceptions"]) - KDE_CHECK_COMPILER_FLAG(fno-check-new, [CXXFLAGS="$CXXFLAGS -fno-check-new"]) - KDE_CHECK_COMPILER_FLAG(fno-common, [CXXFLAGS="$CXXFLAGS -fno-common"]) - KDE_CHECK_COMPILER_FLAG(fexceptions, [USE_EXCEPTIONS="-fexceptions"], USE_EXCEPTIONS= ) - ENABLE_PERMISSIVE_FLAG="-fpermissive" - - if test "$kde_use_pch" = "yes"; then - AC_MSG_CHECKING(whether gcc supports precompiling c header files) - echo >conftest.h - if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then - kde_gcc_supports_pch=yes - AC_MSG_RESULT(yes) - else - kde_gcc_supports_pch=no - AC_MSG_RESULT(no) - fi - if test "$kde_gcc_supports_pch" = "yes"; then - AC_MSG_CHECKING(whether gcc supports precompiling c++ header files) - if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then - kde_gcc_supports_pch=yes - AC_MSG_RESULT(yes) - else - kde_gcc_supports_pch=no - AC_MSG_RESULT(no) - fi - fi - rm -f conftest.h conftest.h.gch - fi - - KDE_CHECK_FOR_OPT_NOINLINE_MATCH - if test "x$kde_cv_opt_noinline_match" = "xno" ; then - CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`" - fi - fi - AM_CONDITIONAL(unsermake_enable_pch, test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes") - if test "$CXX" = "KCC"; then - dnl unfortunately we currently cannot disable exception support in KCC - dnl because doing so is binary incompatible and Qt by default links with exceptions :-( - dnl KDE_CHECK_COMPILER_FLAG(-no_exceptions,[CXXFLAGS="$CXXFLAGS --no_exceptions"]) - dnl KDE_CHECK_COMPILER_FLAG(-exceptions, [USE_EXCEPTIONS="--exceptions"], USE_EXCEPTIONS= ) - - if test "$kde_use_pch" = "yes"; then - dnl TODO: support --pch-dir! - KDE_CHECK_COMPILER_FLAG(-pch,[CXXFLAGS="$CXXFLAGS --pch"]) - dnl the below works (but the dir must exist), but it's - dnl useless for a whole package. - dnl The are precompiled headers for each source file, so when compiling - dnl from scratch, it doesn't make a difference, and they take up - dnl around ~5Mb _per_ sourcefile. - dnl KDE_CHECK_COMPILER_FLAG(-pch_dir /tmp, - dnl [CXXFLAGS="$CXXFLAGS --pch_dir `pwd`/pcheaders"]) - fi - dnl this flag controls inlining. by default KCC inlines in optimisation mode - dnl all implementations that are defined inside the class {} declaration. - dnl because of templates-compatibility with broken gcc compilers, this - dnl can cause excessive inlining. This flag limits it to a sane level - KDE_CHECK_COMPILER_FLAG(-inline_keyword_space_time=6,[CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"]) - KDE_CHECK_COMPILER_FLAG(-inline_auto_space_time=2,[CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"]) - KDE_CHECK_COMPILER_FLAG(-inline_implicit_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"]) - KDE_CHECK_COMPILER_FLAG(-inline_generated_space_time=2.0,[CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"]) - dnl Some source files are shared between multiple executables - dnl (or libraries) and some of those need template instantiations. - dnl In that case KCC needs to compile those sources with - dnl --one_instantiation_per_object. To make it easy for us we compile - dnl _all_ objects with that flag (--one_per is a shorthand). - KDE_CHECK_COMPILER_FLAG(-one_per, [CXXFLAGS="$CXXFLAGS --one_per"]) - fi - AC_SUBST(USE_EXCEPTIONS) - dnl obsolete macro - provided to keep things going - USE_RTTI= - AC_SUBST(USE_RTTI) - - case "$host" in - *-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;; - *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";; - *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";; - *-*-solaris*) - if test "$GXX" = yes; then - libstdcpp=`$CXX -print-file-name=libstdc++.so` - if test ! -f $libstdcpp; then - AC_MSG_ERROR([You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so]) - fi - fi - ;; - esac - - AC_VALIDIFY_CXXFLAGS - - AC_PROG_CXXCPP - - if test "$GCC" = yes; then - NOOPT_CFLAGS=-O0 - fi - KDE_CHECK_COMPILER_FLAG(O0,[NOOPT_CXXFLAGS=-O0]) - - AC_ARG_ENABLE(coverage, - AC_HELP_STRING([--enable-coverage],[use gcc coverage testing]), [ - if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then - ac_coverage_compiler="-fprofile-arcs -ftest-coverage" - ac_coverage_linker="-lgcc" - elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then - ac_coverage_compiler="-fprofile-arcs -ftest-coverage" - ac_coverage_linker="" - else - AC_MSG_ERROR([coverage with your compiler is not supported]) - fi - CFLAGS="$CFLAGS $ac_coverage_compiler" - CXXFLAGS="$CXXFLAGS $ac_coverage_compiler" - LDFLAGS="$LDFLAGS $ac_coverage_linker" - ]) - - AC_SUBST(NOOPT_CXXFLAGS) - AC_SUBST(NOOPT_CFLAGS) - AC_SUBST(ENABLE_PERMISSIVE_FLAG) - - KDE_CHECK_NEW_LDFLAGS - KDE_CHECK_FINAL - KDE_CHECK_CLOSURE - KDE_CHECK_NMCHECK - - ifdef([AM_DEPENDENCIES], AC_REQUIRE([KDE_ADD_DEPENDENCIES]), []) -]) - -AC_DEFUN([KDE_CHECK_VISIBILITY_GCC_BUG], - [ - AC_CACHE_CHECK([for gcc -fvisibility-inlines-hidden bug], kde_cv_val_gcc_visibility_bug, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - safe_CXXFLAGS=$CXXFLAGS - safe_LDFLAGS=$LDFLAGS - CXXFLAGS="$CXXFLAGS -fPIC -fvisibility-inlines-hidden -O0" - LDFLAGS="$LDFLAGS -shared -fPIC" - - AC_TRY_LINK( - [ - /* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=19664 */ - #include - int some_function( void ) __attribute__ ((visibility("default"))); - int some_function( void ) - { - std::string s("blafasel"); - return 0; - } - ], [/* elvis is alive */], - kde_cv_val_gcc_visibility_bug=no, kde_cv_val_gcc_visibility_bug=yes) - - CXXFLAGS=$safe_CXXFLAGS - LDFLAGS=$safe_LDFLAGS - AC_LANG_RESTORE - ] - ) - - if test x$kde_cv_val_gcc_visibility_bug = xno; then - CXXFLAGS="$CXXFLAGS -fvisibility-inlines-hidden" - fi - ] -) - -AC_DEFUN([KDE_ENABLE_HIDDEN_VISIBILITY], -[ - AC_BEFORE([AC_PATH_QT_1_3], [KDE_ENABLE_HIDDEN_VISIBILITY]) - - AC_MSG_CHECKING([grepping for visibility push/pop in headers]) - - if test "x$GXX" = "xyes"; then - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_EGREP_CPP( - [GCC visibility push], - [ #include - ], - [ - AC_MSG_RESULT(yes) - kde_stdc_visibility_patched=yes ], - [ - AC_MSG_RESULT(no) - AC_MSG_WARN([Your libstdc++ doesn't appear to be patched for - visibility support. Disabling -fvisibility=hidden]) - - kde_stdc_visibility_patched=no ]) - - AC_LANG_RESTORE - - kde_have_gcc_visibility=no - KDE_CHECK_COMPILER_FLAG(fvisibility=hidden, - [ - kde_have_gcc_visibility=yes - dnl the whole toolchain is just a mess, gcc is just too buggy - dnl to handle STL with visibility enabled. Lets reconsider - dnl when gcc 4.2 is out or when things get fixed in the compiler. - dnl Contact mueller@kde.org for details. - AC_ARG_ENABLE(gcc-hidden-visibility, - AC_HELP_STRING([--enable-gcc-hidden-visibility],[toolchain hidden visibility [default=no]]), - [kde_have_gcc_visibility=$enableval], - [kde_have_gcc_visibility=no]) - - AC_CACHE_CHECK([if Qt is patched for -fvisibility], kde_cv_val_qt_gcc_visibility_patched, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - safe_CXXFLAGS=$CXXFLAGS - CXXFLAGS="$CXXFLAGS $all_includes" - - AC_TRY_COMPILE( - [ -#include -#if Q_EXPORT - 0 != 0 -/* if this compiles, then Q_EXPORT is undefined */ -/* if Q_EXPORT is nonempty, this will break compilation */ -#endif - ], [/* elvis is alive */], - kde_cv_val_qt_gcc_visibility_patched=no, kde_cv_val_qt_gcc_visibility_patched=yes) - - CXXFLAGS=$safe_CXXFLAGS - AC_LANG_RESTORE - ] - ) - - if test x$kde_have_gcc_visibility = "xyes" && test x$kde_stdc_visibility_patched = "xyes" && test x$kde_cv_val_qt_gcc_visibility_patched = "xyes"; then - CXXFLAGS="$CXXFLAGS -fvisibility=hidden" - KDE_CHECK_VISIBILITY_GCC_BUG - HAVE_GCC_VISIBILITY=1 - AC_DEFINE_UNQUOTED(__KDE_HAVE_GCC_VISIBILITY, "$HAVE_GCC_VISIBILITY", [define to 1 if -fvisibility is supported]) - fi - ]) - fi -]) - -AC_DEFUN([KDE_ADD_DEPENDENCIES], -[ - [A]M_DEPENDENCIES(CC) - [A]M_DEPENDENCIES(CXX) -]) - -dnl just a wrapper to clean up configure.in -AC_DEFUN([KDE_PROG_LIBTOOL], -[ -AC_REQUIRE([AC_CHECK_COMPILERS]) -AC_REQUIRE([AC_ENABLE_SHARED]) -AC_REQUIRE([AC_ENABLE_STATIC]) - -AC_REQUIRE([AC_LIBTOOL_DLOPEN]) -AC_REQUIRE([KDE_CHECK_LIB64]) - -AC_OBJEXT -AC_EXEEXT - -AM_PROG_LIBTOOL -AC_LIBTOOL_CXX - -LIBTOOL_SHELL="/bin/sh ./libtool" -# LIBTOOL="$LIBTOOL --silent" -KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)" -AC_SUBST(KDE_PLUGIN) - -# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs. -KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)" -AC_SUBST(KDE_CHECK_PLUGIN) - -# we patch configure quite some so we better keep that consistent for incremental runs -AC_SUBST(AUTOCONF,'$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure') -]) - -AC_DEFUN([KDE_CHECK_LIB64], -[ - AC_ARG_ENABLE(libsuffix, - AC_HELP_STRING([--enable-libsuffix], - [/lib directory suffix (64,32,none,auto[=default])]), - kdelibsuff=$enableval, kdelibsuff="auto") - - if test "$kdelibsuff" = "auto"; then - -cat > conftest.c << EOF -#include -int main() { - return 0; -} -EOF - kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{ - s,.*/lib\([[^\/]]*\)/.*,\1, - p -}'` - rm -rf conftest.* - fi - - if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then - kdelibsuff= - fi - if test -z "$kdelibsuff"; then - AC_MSG_RESULT([not using lib directory suffix]) - AC_DEFINE(KDELIBSUFF, [""], Suffix for lib directories) - else - if test "$libdir" = '${exec_prefix}/lib'; then - libdir="$libdir${kdelibsuff}" - AC_SUBST([libdir], ["$libdir"]) dnl ugly hack for lib64 platforms - fi - AC_DEFINE_UNQUOTED(KDELIBSUFF, ["${kdelibsuff}"], Suffix for lib directories) - AC_MSG_RESULT([using lib directory suffix $kdelibsuff]) - fi -]) - -AC_DEFUN([KDE_CHECK_TYPES], -[ AC_CHECK_SIZEOF(int, 4)dnl - AC_CHECK_SIZEOF(short)dnl - AC_CHECK_SIZEOF(long, 4)dnl - AC_CHECK_SIZEOF(char *, 4)dnl -])dnl - -dnl Not used - kept for compat only? -AC_DEFUN([KDE_DO_IT_ALL], -[ -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AM_INIT_AUTOMAKE($1, $2) -AM_DISABLE_LIBRARIES -AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) -AC_CHECK_COMPILERS -KDE_PROG_LIBTOOL -AM_KDE_WITH_NLS -AC_PATH_KDE -]) - -AC_DEFUN([AC_CHECK_RPATH], -[ -AC_MSG_CHECKING(for rpath) -AC_ARG_ENABLE(rpath, - AC_HELP_STRING([--disable-rpath],[do not use the rpath feature of ld]), - USE_RPATH=$enableval, USE_RPATH=yes) - -if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then - - KDE_RPATH="-R \$(libdir)" - - if test "$kde_libraries" != "$libdir"; then - KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)" - fi - - if test -n "$qt_libraries"; then - KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)" - fi - dnl $x_libraries is set to /usr/lib in case - if test -n "$X_LDFLAGS"; then - X_RPATH="-R \$(x_libraries)" - KDE_RPATH="$KDE_RPATH $X_RPATH" - fi - if test -n "$KDE_EXTRA_RPATH"; then - KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)" - fi -fi -AC_SUBST(KDE_EXTRA_RPATH) -AC_SUBST(KDE_RPATH) -AC_SUBST(X_RPATH) -AC_MSG_RESULT($USE_RPATH) -]) - -dnl Check for the type of the third argument of getsockname -AC_DEFUN([AC_CHECK_SOCKLEN_T], -[ - AC_MSG_CHECKING(for socklen_t) - AC_CACHE_VAL(kde_cv_socklen_t, - [ - AC_LANG_PUSH(C++) - kde_cv_socklen_t=no - AC_TRY_COMPILE([ - #include - #include - ], - [ - socklen_t len; - getpeername(0,0,&len); - ], - [ - kde_cv_socklen_t=yes - kde_cv_socklen_t_equiv=socklen_t - ]) - AC_LANG_POP(C++) - ]) - AC_MSG_RESULT($kde_cv_socklen_t) - if test $kde_cv_socklen_t = no; then - AC_MSG_CHECKING([for socklen_t equivalent for socket functions]) - AC_CACHE_VAL(kde_cv_socklen_t_equiv, - [ - kde_cv_socklen_t_equiv=int - AC_LANG_PUSH(C++) - for t in int size_t unsigned long "unsigned long"; do - AC_TRY_COMPILE([ - #include - #include - ], - [ - $t len; - getpeername(0,0,&len); - ], - [ - kde_cv_socklen_t_equiv="$t" - break - ]) - done - AC_LANG_POP(C++) - ]) - AC_MSG_RESULT($kde_cv_socklen_t_equiv) - fi - AC_DEFINE_UNQUOTED(kde_socklen_t, $kde_cv_socklen_t_equiv, - [type to use in place of socklen_t if not defined]) - AC_DEFINE_UNQUOTED(ksize_t, $kde_cv_socklen_t_equiv, - [type to use in place of socklen_t if not defined (deprecated, use kde_socklen_t)]) -]) - -dnl This is a merge of some macros out of the gettext aclocal.m4 -dnl since we don't need anything, I took the things we need -dnl the copyright for them is: -dnl > -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. -dnl > -dnl for this file it is relicensed under LGPL - -AC_DEFUN([AM_KDE_WITH_NLS], - [ - dnl If we use NLS figure out what method - - AM_PATH_PROG_WITH_TEST_KDE(MSGFMT, msgfmt, - [test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then - AC_MSG_RESULT([found msgfmt program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - MSGFMT=$GMSGFMT - AC_SUBST(GMSGFMT) - AC_SUBST(MSGFMT) - - AM_PATH_PROG_WITH_TEST_KDE(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext programs is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - AC_SUBST(XGETTEXT) - - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. - -# serial 1 -# Stephan Kulow: I appended a _KDE against name conflicts - -dnl AM_PATH_PROG_WITH_TEST_KDE(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST_KDE], -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. - -# serial 1 - -AC_DEFUN([AM_LC_MESSAGES], - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, [Define if your locale.h file contains LC_MESSAGES]) - fi - fi]) - -dnl From Jim Meyering. -dnl FIXME: migrate into libit. - -AC_DEFUN([AM_FUNC_OBSTACK], -[AC_CACHE_CHECK([for obstacks], am_cv_func_obstack, - [AC_TRY_LINK([#include "obstack.h"], - [struct obstack *mem;obstack_free(mem,(char *) 0)], - am_cv_func_obstack=yes, - am_cv_func_obstack=no)]) - if test $am_cv_func_obstack = yes; then - AC_DEFINE(HAVE_OBSTACK) - else - LIBOBJS="$LIBOBJS obstack.o" - fi -]) - -dnl From Jim Meyering. Use this if you use the GNU error.[ch]. -dnl FIXME: Migrate into libit - -AC_DEFUN([AM_FUNC_ERROR_AT_LINE], -[AC_CACHE_CHECK([for error_at_line], am_cv_lib_error_at_line, - [AC_TRY_LINK([],[error_at_line(0, 0, "", 0, "");], - am_cv_lib_error_at_line=yes, - am_cv_lib_error_at_line=no)]) - if test $am_cv_lib_error_at_line = no; then - LIBOBJS="$LIBOBJS error.o" - fi - AC_SUBST(LIBOBJS)dnl -]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. - -# serial 1 -# Stephan Kulow: I put a KDE in it to avoid name conflicts - -AC_DEFUN([AM_KDE_GNU_GETTEXT], - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([AM_KDE_WITH_NLS])dnl - AC_CHECK_HEADERS([limits.h locale.h nl_types.h string.h values.h alloca.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setlocale strchr strcasecmp \ -__argz_count __argz_stringify __argz_next]) - - AC_MSG_CHECKING(for stpcpy) - AC_CACHE_VAL(kde_cv_func_stpcpy, - [ - kde_safe_cxxflags=$CXXFLAGS - CXXFLAGS="-Werror" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_COMPILE([ - #include - ], - [ - char buffer[200]; - stpcpy(buffer, buffer); - ], - kde_cv_func_stpcpy=yes, - kde_cv_func_stpcpy=no) - AC_LANG_RESTORE - CXXFLAGS=$kde_safe_cxxflags - ]) - AC_MSG_RESULT($kde_cv_func_stpcpy) - if eval "test \"`echo $kde_cv_func_stpcpy`\" = yes"; then - AC_DEFINE(HAVE_STPCPY, 1, [Define if you have stpcpy]) - fi - - AM_LC_MESSAGES - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - ]) - -AC_DEFUN([AC_HAVE_XPM], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$XPM_LDFLAGS" && XPM_LDFLAGS= - test -z "$XPM_INCLUDE" && XPM_INCLUDE= - - AC_ARG_WITH(xpm,AC_HELP_STRING([--without-xpm],[disable color pixmap XPM tests]), - xpm_test=$withval, xpm_test="yes") - if test "x$xpm_test" = xno; then - ac_cv_have_xpm=no - else - AC_MSG_CHECKING(for XPM) - AC_CACHE_VAL(ac_cv_have_xpm, - [ - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm -lX11 -lXext $LIBZ $LIBSOCKET" - else - LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS $LDFLAGS $XPM_LDFLAGS $all_libraries -lXpm $LIBZ $LIBSOCKET" - fi - CFLAGS="$CFLAGS $X_INCLUDES $USER_INCLUDES" - test -n "$XPM_INCLUDE" && CFLAGS="-I$XPM_INCLUDE $CFLAGS" - AC_TRY_LINK([#include ],[], - ac_cv_have_xpm="yes",ac_cv_have_xpm="no") - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - ])dnl - - if test "$ac_cv_have_xpm" = no; then - AC_MSG_RESULT(no) - XPM_LDFLAGS="" - XPMINC="" - $2 - else - AC_DEFINE(HAVE_XPM, 1, [Define if you have XPM support]) - if test "$XPM_LDFLAGS" = ""; then - XPMLIB='-lXpm $(LIB_X11)' - else - XPMLIB="-L$XPM_LDFLAGS -lXpm "'$(LIB_X11)' - fi - if test "$XPM_INCLUDE" = ""; then - XPMINC="" - else - XPMINC="-I$XPM_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - AC_SUBST(XPMINC) - AC_SUBST(XPMLIB) -]) - -AC_DEFUN([AC_HAVE_DPMS], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$DPMS_LDFLAGS" && DPMS_LDFLAGS= - test -z "$DPMS_INCLUDE" && DPMS_INCLUDE= - DPMS_LIB= - - AC_ARG_WITH(dpms,AC_HELP_STRING([--without-dpms],[disable DPMS power saving]), - dpms_test=$withval, dpms_test="yes") - if test "x$dpms_test" = xno; then - ac_cv_have_dpms=no - else - AC_MSG_CHECKING(for DPMS) - dnl Note: ac_cv_have_dpms can be no, yes, or -lXdpms. - dnl 'yes' means DPMS_LIB="", '-lXdpms' means DPMS_LIB="-lXdpms". - AC_CACHE_VAL(ac_cv_have_dpms, - [ - if test "x$kde_use_qt_emb" = "xyes" || test "x$kde_use_qt_mac" = "xyes"; then - AC_MSG_RESULT(no) - ac_cv_have_dpms="no" - else - ac_save_ldflags="$LDFLAGS" - ac_save_cflags="$CFLAGS" - ac_save_libs="$LIBS" - LDFLAGS="$LDFLAGS $DPMS_LDFLAGS $all_libraries" - LIBS="-lX11 -lXext $LIBSOCKET" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - ac_cv_have_dpms="yes", [ - LIBS="-lXdpms $LIBS" - AC_TRY_LINK([ - #include - #include - #include - #include - int foo_test_dpms() - { return DPMSSetTimeouts( 0, 0, 0, 0 ); }],[], - [ - ac_cv_have_dpms="-lXdpms" - ],ac_cv_have_dpms="no") - ]) - LDFLAGS="$ac_save_ldflags" - CFLAGS="$ac_save_cflags" - LIBS="$ac_save_libs" - fi - ])dnl - - if test "$ac_cv_have_dpms" = no; then - AC_MSG_RESULT(no) - DPMS_LDFLAGS="" - DPMSINC="" - $2 - else - AC_DEFINE(HAVE_DPMS, 1, [Define if you have DPMS support]) - if test "$ac_cv_have_dpms" = "-lXdpms"; then - DPMS_LIB="-lXdpms" - fi - if test "$DPMS_LDFLAGS" = ""; then - DPMSLIB="$DPMS_LIB "'$(LIB_X11)' - else - DPMSLIB="$DPMS_LDFLAGS $DPMS_LIB "'$(LIB_X11)' - fi - if test "$DPMS_INCLUDE" = ""; then - DPMSINC="" - else - DPMSINC="-I$DPMS_INCLUDE" - fi - AC_MSG_RESULT(yes) - $1 - fi - fi - ac_save_cflags="$CFLAGS" - CFLAGS="$CFLAGS $X_INCLUDES" - test -n "$DPMS_INCLUDE" && CFLAGS="-I$DPMS_INCLUDE $CFLAGS" - AH_TEMPLATE(HAVE_DPMSCAPABLE_PROTO, - [Define if you have the DPMSCapable prototype in ]) - AC_CHECK_DECL(DPMSCapable, - AC_DEFINE(HAVE_DPMSCAPABLE_PROTO),, - [#include - #include ]) - AH_TEMPLATE(HAVE_DPMSINFO_PROTO, - [Define if you have the DPMSInfo prototype in ]) - AC_CHECK_DECL(DPMSInfo, - AC_DEFINE(HAVE_DPMSINFO_PROTO),, - [#include - #include ]) - CFLAGS="$ac_save_cflags" - AC_SUBST(DPMSINC) - AC_SUBST(DPMSLIB) -]) - -AC_DEFUN([AC_HAVE_GL], - [AC_REQUIRE_CPP()dnl - AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) - - test -z "$GL_LDFLAGS" && GL_LDFLAGS= - test -z "$GL_INCLUDE" && GL_INCLUDE= - - AC_ARG_WITH(gl,AC_HELP_STRING([--without-gl],[disable 3D GL modes]), - gl_test=$withval, gl_test="yes") - if test "x$kde_use_qt_emb" = "xyes"; then - # GL and Qt Embedded is a no-go for now. - ac_cv_have_gl=no - elif test "x$gl_test" = xno; then - ac_cv_have_gl=no - else - AC_MSG_CHECKING(for GL) - AC_CACHE_VAL(ac_cv_have_gl, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_ldflags=$LDFLAGS - ac_save_cxxflags=$CXXFLAGS - ac_save_libs=$LIBS - LDFLAGS="$LDFLAGS $GL_LDFLAGS $X_LDFLAGS $all_libraries" - LIBS="$LIBS -lGL -lGLU" - test "x$kde_use_qt_mac" != xyes && test "x$kde_use_qt_emb" != xyes && LIBS="$LIBS -lX11" - LIBS="$LIBS $LIB_XEXT -lm $LIBSOCKET" - CXXFLAGS="$CFLAGS $X_INCLUDES" - test -n "$GL_INCLUDE" && CFLAGS="-I$GL_INCLUDE $CFLAGS" - AC_TRY_LINK([#include -#include -], [], - ac_cv_have_gl="yes", ac_cv_have_gl="no") - AC_LANG_RESTORE - LDFLAGS=$ac_save_ldflags - CXXFLAGS=$ac_save_cxxflags - LIBS=$ac_save_libs - ])dnl - - if test "$ac_cv_have_gl" = "no"; then - AC_MSG_RESULT(no) - GL_LDFLAGS="" - GLINC="" - $2 - else - AC_DEFINE(HAVE_GL, 1, [Defines if you have GL (Mesa, OpenGL, ...)]) - if test "$GL_LDFLAGS" = ""; then - GLLIB='-lGLU -lGL $(LIB_X11)' - else - GLLIB="$GL_LDFLAGS -lGLU -lGL "'$(LIB_X11)' - fi - if test "$GL_INCLUDE" = ""; then - GLINC="" - else - GLINC="-I$GL_INCLUDE" - fi - AC_MSG_RESULT($ac_cv_have_gl) - $1 - fi - fi - AC_SUBST(GLINC) - AC_SUBST(GLLIB) -]) - - - dnl shadow password and PAM magic - maintained by ossi@kde.org - -AC_DEFUN([KDE_PAM], [ - AC_REQUIRE([KDE_CHECK_LIBDL]) - - want_pam= - AC_ARG_WITH(pam, - AC_HELP_STRING([--with-pam[=ARG]],[enable support for PAM: ARG=[yes|no|service name]]), - [ if test "x$withval" = "xyes"; then - want_pam=yes - pam_service=kde - elif test "x$withval" = "xno"; then - want_pam=no - else - want_pam=yes - pam_service=$withval - fi - ], [ pam_service=kde ]) - - use_pam= - PAMLIBS= - if test "x$want_pam" != xno; then - AC_CHECK_LIB(pam, pam_start, [ - AC_CHECK_HEADER(security/pam_appl.h, - [ pam_header=security/pam_appl.h ], - [ AC_CHECK_HEADER(pam/pam_appl.h, - [ pam_header=pam/pam_appl.h ], - [ - AC_MSG_WARN([PAM detected, but no headers found! -Make sure you have the necessary development packages installed.]) - ] - ) - ] - ) - ], , $LIBDL) - if test -z "$pam_header"; then - if test "x$want_pam" = xyes; then - AC_MSG_ERROR([--with-pam was specified, but cannot compile with PAM!]) - fi - else - AC_DEFINE(HAVE_PAM, 1, [Defines if you have PAM (Pluggable Authentication Modules)]) - PAMLIBS="$PAM_MISC_LIB -lpam $LIBDL" - use_pam=yes - - dnl darwin claims to be something special - if test "$pam_header" = "pam/pam_appl.h"; then - AC_DEFINE(HAVE_PAM_PAM_APPL_H, 1, [Define if your PAM headers are in pam/ instead of security/]) - fi - - dnl test whether struct pam_message is const (Linux) or not (Sun) - AC_MSG_CHECKING(for const pam_message) - AC_EGREP_HEADER([struct pam_message], $pam_header, - [ AC_EGREP_HEADER([const struct pam_message], $pam_header, - [AC_MSG_RESULT([const: Linux-type PAM])], - [AC_MSG_RESULT([nonconst: Sun-type PAM]) - AC_DEFINE(PAM_MESSAGE_NONCONST, 1, [Define if your PAM support takes non-const arguments (Solaris)])] - )], - [AC_MSG_RESULT([not found - assume const, Linux-type PAM])]) - fi - fi - - AC_SUBST(PAMLIBS) -]) - -dnl DEF_PAM_SERVICE(arg name, full name, define name) -AC_DEFUN([DEF_PAM_SERVICE], [ - AC_ARG_WITH($1-pam, - AC_HELP_STRING([--with-$1-pam=[val]],[override PAM service from --with-pam for $2]), - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE=$withval - else - AC_MSG_ERROR([Cannot use use --with-$1-pam, as no PAM was detected. -You may want to enforce it by using --with-pam.]) - fi - ], - [ if test "x$use_pam" = xyes; then - $3_PAM_SERVICE="$pam_service" - fi - ]) - if test -n "$$3_PAM_SERVICE"; then - AC_MSG_RESULT([The PAM service used by $2 will be $$3_PAM_SERVICE]) - AC_DEFINE_UNQUOTED($3_PAM_SERVICE, "$$3_PAM_SERVICE", [The PAM service to be used by $2]) - fi - AC_SUBST($3_PAM_SERVICE) -]) - -AC_DEFUN([KDE_SHADOWPASSWD], [ - AC_REQUIRE([KDE_PAM]) - - AC_CHECK_LIB(shadow, getspent, - [ LIBSHADOW="-lshadow" - ac_use_shadow=yes - ], - [ dnl for UnixWare - AC_CHECK_LIB(gen, getspent, - [ LIBGEN="-lgen" - ac_use_shadow=yes - ], - [ AC_CHECK_FUNC(getspent, - [ ac_use_shadow=yes ], - [ ac_use_shadow=no ]) - ]) - ]) - AC_SUBST(LIBSHADOW) - AC_SUBST(LIBGEN) - - AC_MSG_CHECKING([for shadow passwords]) - - AC_ARG_WITH(shadow, - AC_HELP_STRING([--with-shadow],[If you want shadow password support]), - [ if test "x$withval" != "xno"; then - use_shadow=yes - else - use_shadow=no - fi - ], [ - use_shadow="$ac_use_shadow" - ]) - - if test "x$use_shadow" = xyes; then - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_SHADOW, 1, [Define if you use shadow passwords]) - else - AC_MSG_RESULT(no) - LIBSHADOW= - LIBGEN= - fi - - dnl finally make the relevant binaries setuid root, if we have shadow passwds. - dnl this still applies, if we could use it indirectly through pam. - if test "x$use_shadow" = xyes || - ( test "x$use_pam" = xyes && test "x$ac_use_shadow" = xyes ); then - case $host in - *-*-freebsd* | *-*-netbsd* | *-*-openbsd*) - SETUIDFLAGS="-m 4755 -o root";; - *) - SETUIDFLAGS="-m 4755";; - esac - fi - AC_SUBST(SETUIDFLAGS) - -]) - -AC_DEFUN([KDE_PASSWDLIBS], [ - AC_REQUIRE([KDE_MISC_TESTS]) dnl for LIBCRYPT - AC_REQUIRE([KDE_PAM]) - AC_REQUIRE([KDE_SHADOWPASSWD]) - - if test "x$use_pam" = "xyes"; then - PASSWDLIBS="$PAMLIBS" - else - PASSWDLIBS="$LIBCRYPT $LIBSHADOW $LIBGEN" - fi - - dnl FreeBSD uses a shadow-like setup, where /etc/passwd holds the users, but - dnl /etc/master.passwd holds the actual passwords. /etc/master.passwd requires - dnl root to read, so kcheckpass needs to be root (even when using pam, since pam - dnl may need to read /etc/master.passwd). - case $host in - *-*-freebsd*) - SETUIDFLAGS="-m 4755 -o root" - ;; - *) - ;; - esac - - AC_SUBST(PASSWDLIBS) -]) - -AC_DEFUN([KDE_CHECK_LIBDL], -[ -AC_CHECK_LIB(dl, dlopen, [ -LIBDL="-ldl" -ac_cv_have_dlfcn=yes -]) - -AC_CHECK_LIB(dld, shl_unload, [ -LIBDL="-ldld" -ac_cv_have_shload=yes -]) - -AC_SUBST(LIBDL) -]) - -AC_DEFUN([KDE_CHECK_DLOPEN], -[ -KDE_CHECK_LIBDL -AC_CHECK_HEADERS(dlfcn.h dl.h) -if test "$ac_cv_header_dlfcn_h" = "no"; then - ac_cv_have_dlfcn=no -fi - -if test "$ac_cv_header_dl_h" = "no"; then - ac_cv_have_shload=no -fi - -dnl XXX why change enable_dlopen? its already set by autoconf's AC_ARG_ENABLE -dnl (MM) -AC_ARG_ENABLE(dlopen, -AC_HELP_STRING([--disable-dlopen],[link statically [default=no]]), -enable_dlopen=$enableval, -enable_dlopen=yes) - -# override the user's opinion, if we know it better ;) -if test "$ac_cv_have_dlfcn" = "no" && test "$ac_cv_have_shload" = "no"; then - enable_dlopen=no -fi - -if test "$ac_cv_have_dlfcn" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_DLFCN, 1, [Define if you have dlfcn]) -fi - -if test "$ac_cv_have_shload" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_SHLOAD, 1, [Define if you have shload]) -fi - -if test "$enable_dlopen" = no ; then - test -n "$1" && eval $1 -else - test -n "$2" && eval $2 -fi - -]) - -AC_DEFUN([KDE_CHECK_DYNAMIC_LOADING], -[ -KDE_CHECK_DLOPEN(libtool_enable_shared=yes, libtool_enable_static=no) -KDE_PROG_LIBTOOL -AC_MSG_CHECKING([dynamic loading]) -eval "`egrep '^build_libtool_libs=' libtool`" -if test "$build_libtool_libs" = "yes" && test "$enable_dlopen" = "yes"; then - dynamic_loading=yes - AC_DEFINE_UNQUOTED(HAVE_DYNAMIC_LOADING) -else - dynamic_loading=no -fi -AC_MSG_RESULT($dynamic_loading) -if test "$dynamic_loading" = "yes"; then - $1 -else - $2 -fi -]) - -AC_DEFUN([KDE_ADD_INCLUDES], -[ -if test -z "$1"; then - test_include="Pix.h" -else - test_include="$1" -fi - -AC_MSG_CHECKING([for libg++ ($test_include)]) - -AC_CACHE_VAL(kde_cv_libgpp_includes, -[ -kde_cv_libgpp_includes=no - - for ac_dir in \ - \ - /usr/include/g++ \ - /usr/include \ - /usr/unsupported/include \ - /opt/include \ - $extra_include \ - ; \ - do - if test -r "$ac_dir/$test_include"; then - kde_cv_libgpp_includes=$ac_dir - break - fi - done -]) - -AC_MSG_RESULT($kde_cv_libgpp_includes) -if test "$kde_cv_libgpp_includes" != "no"; then - all_includes="-I$kde_cv_libgpp_includes $all_includes $USER_INCLUDES" -fi -]) -]) - -AC_DEFUN([KDE_CHECK_LIBPTHREAD], -[ - dnl This code is here specifically to handle the - dnl various flavors of threading library on FreeBSD - dnl 4-, 5-, and 6-, and the (weird) rules around it. - dnl There may be an environment PTHREAD_LIBS that - dnl specifies what to use; otherwise, search for it. - dnl -pthread is special cased and unsets LIBPTHREAD - dnl below if found. - LIBPTHREAD="" - - if test -n "$PTHREAD_LIBS"; then - if test "x$PTHREAD_LIBS" = "x-pthread" ; then - LIBPTHREAD="PTHREAD" - else - PTHREAD_LIBS_save="$PTHREAD_LIBS" - PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'` - AC_MSG_CHECKING([for pthread_create in $PTHREAD_LIBS]) - KDE_CHECK_LIB($PTHREAD_LIBS, pthread_create, [ - LIBPTHREAD="$PTHREAD_LIBS_save"]) - PTHREAD_LIBS="$PTHREAD_LIBS_save" - fi - fi - - dnl Is this test really needed, in the face of the Tru64 test below? - if test -z "$LIBPTHREAD"; then - AC_CHECK_LIB(pthread, pthread_create, [LIBPTHREAD="-lpthread"]) - fi - - dnl This is a special Tru64 check, see BR 76171 issue #18. - if test -z "$LIBPTHREAD" ; then - AC_MSG_CHECKING([for pthread_create in -lpthread]) - kde_safe_libs=$LIBS - LIBS="$LIBS -lpthread" - AC_TRY_LINK([#include ],[(void)pthread_create(0,0,0,0);],[ - AC_MSG_RESULT(yes) - LIBPTHREAD="-lpthread"],[ - AC_MSG_RESULT(no)]) - LIBS=$kde_safe_libs - fi - - dnl Un-special-case for FreeBSD. - if test "x$LIBPTHREAD" = "xPTHREAD" ; then - LIBPTHREAD="" - fi - - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_PTHREAD_OPTION], -[ - USE_THREADS="" - if test -z "$LIBPTHREAD"; then - KDE_CHECK_COMPILER_FLAG(pthread, [USE_THREADS="-D_THREAD_SAFE -pthread"]) - fi - - AH_VERBATIM(__svr_define, [ -#if defined(__SVR4) && !defined(__svr4__) -#define __svr4__ 1 -#endif -]) - case $host_os in - solaris*) - KDE_CHECK_COMPILER_FLAG(mt, [USE_THREADS="-mt"]) - CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4" - ;; - freebsd*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS" - ;; - aix*) - CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" - LIBPTHREAD="$LIBPTHREAD -lc_r" - ;; - linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" - if test "$CXX" = "KCC"; then - CXXFLAGS="$CXXFLAGS --thread_safe" - NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe" - fi - ;; - *) - ;; - esac - AC_SUBST(USE_THREADS) - AC_SUBST(LIBPTHREAD) -]) - -AC_DEFUN([KDE_CHECK_THREADING], -[ - AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) - AC_REQUIRE([KDE_CHECK_PTHREAD_OPTION]) - dnl default is yes if libpthread is found and no if no libpthread is available - if test -z "$LIBPTHREAD"; then - if test -z "$USE_THREADS"; then - kde_check_threading_default=no - else - kde_check_threading_default=yes - fi - else - kde_check_threading_default=yes - fi - AC_ARG_ENABLE(threading,AC_HELP_STRING([--disable-threading],[disables threading even if libpthread found]), - kde_use_threading=$enableval, kde_use_threading=$kde_check_threading_default) - if test "x$kde_use_threading" = "xyes"; then - AC_DEFINE(HAVE_LIBPTHREAD, 1, [Define if you have a working libpthread (will enable threaded code)]) - fi -]) - -AC_DEFUN([KDE_TRY_LINK_PYTHON], -[ -if test "$kde_python_link_found" = no; then - -if test "$1" = normal; then - AC_MSG_CHECKING(if a Python application links) -else - AC_MSG_CHECKING(if Python depends on $2) -fi - -AC_CACHE_VAL(kde_cv_try_link_python_$1, -[ -kde_save_cflags="$CFLAGS" -CFLAGS="$CFLAGS $PYTHONINC" -kde_save_libs="$LIBS" -LIBS="$LIBS $LIBPYTHON $2 $LIBDL $LIBSOCKET" -kde_save_ldflags="$LDFLAGS" -LDFLAGS="$LDFLAGS $PYTHONLIB" - -AC_TRY_LINK( -[ -#include -],[ - PySys_SetArgv(1, 0); -], - [kde_cv_try_link_python_$1=yes], - [kde_cv_try_link_python_$1=no] -) -CFLAGS="$kde_save_cflags" -LIBS="$kde_save_libs" -LDFLAGS="$kde_save_ldflags" -]) - -if test "$kde_cv_try_link_python_$1" = "yes"; then - AC_MSG_RESULT(yes) - kde_python_link_found=yes - if test ! "$1" = normal; then - LIBPYTHON="$LIBPYTHON $2" - fi - $3 -else - AC_MSG_RESULT(no) - $4 -fi - -fi - -]) - -AC_DEFUN([KDE_CHECK_PYTHON_DIR], -[ -AC_MSG_CHECKING([for Python directory]) - -AC_CACHE_VAL(kde_cv_pythondir, -[ - if test -z "$PYTHONDIR"; then - kde_cv_pythondir=/usr/local - else - kde_cv_pythondir="$PYTHONDIR" - fi -]) - -AC_ARG_WITH(pythondir, -AC_HELP_STRING([--with-pythondir=pythondir],[use python installed in pythondir]), -[ - ac_python_dir=$withval -], ac_python_dir=$kde_cv_pythondir -) - -AC_MSG_RESULT($ac_python_dir) -]) - -AC_DEFUN([KDE_CHECK_PYTHON_INTERN], -[ -AC_REQUIRE([KDE_CHECK_LIBDL]) -AC_REQUIRE([KDE_CHECK_LIBPTHREAD]) -AC_REQUIRE([KDE_CHECK_PYTHON_DIR]) - -if test -z "$1"; then - version="1.5" -else - version="$1" -fi - -AC_MSG_CHECKING([for Python$version]) - -python_incdirs="$ac_python_dir/include /usr/include /usr/local/include/ $kde_extra_includes" -AC_FIND_FILE(Python.h, $python_incdirs, python_incdir) -if test ! -r $python_incdir/Python.h; then - AC_FIND_FILE(python$version/Python.h, $python_incdirs, python_incdir) - python_incdir=$python_incdir/python$version - if test ! -r $python_incdir/Python.h; then - python_incdir=no - fi -fi - -PYTHONINC=-I$python_incdir - -python_libdirs="$ac_python_dir/lib$kdelibsuff /usr/lib$kdelibsuff /usr/local /usr/lib$kdelibsuff $kde_extra_libs" -AC_FIND_FILE(libpython$version.so, $python_libdirs, python_libdir) -if test ! -r $python_libdir/libpython$version.so; then - AC_FIND_FILE(libpython$version.a, $python_libdirs, python_libdir) - if test ! -r $python_libdir/libpython$version.a; then - AC_FIND_FILE(python$version/config/libpython$version.a, $python_libdirs, python_libdir) - python_libdir=$python_libdir/python$version/config - if test ! -r $python_libdir/libpython$version.a; then - python_libdir=no - fi - fi -fi - -PYTHONLIB=-L$python_libdir -kde_orig_LIBPYTHON=$LIBPYTHON -if test -z "$LIBPYTHON"; then - LIBPYTHON=-lpython$version -fi - -AC_FIND_FILE(python$version/copy.py, $python_libdirs, python_moddir) -python_moddir=$python_moddir/python$version -if test ! -r $python_moddir/copy.py; then - python_moddir=no -fi - -PYTHONMODDIR=$python_moddir - -AC_MSG_RESULT(header $python_incdir library $python_libdir modules $python_moddir) - -if test x$python_incdir = xno || test x$python_libdir = xno || test x$python_moddir = xno; then - LIBPYTHON=$kde_orig_LIBPYTHON - test "x$PYTHONLIB" = "x-Lno" && PYTHONLIB="" - test "x$PYTHONINC" = "x-Ino" && PYTHONINC="" - $2 -else - dnl Note: this test is very weak - kde_python_link_found=no - KDE_TRY_LINK_PYTHON(normal) - KDE_TRY_LINK_PYTHON(m, -lm) - KDE_TRY_LINK_PYTHON(pthread, $LIBPTHREAD) - KDE_TRY_LINK_PYTHON(tcl, -ltcl) - KDE_TRY_LINK_PYTHON(db2, -ldb2) - KDE_TRY_LINK_PYTHON(m_and_thread, [$LIBPTHREAD -lm]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_util, [$LIBPTHREAD -lm -lutil]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db3, [$LIBPTHREAD -lm -ldb-3 -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_db3, [$LIBPTHREAD -ldb-3]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db, [$LIBPTHREAD -lm -ldb -ltermcap -lutil]) - KDE_TRY_LINK_PYTHON(pthread_and_dl, [$LIBPTHREAD $LIBDL -lutil -lreadline -lncurses -lm]) - KDE_TRY_LINK_PYTHON(pthread_and_panel_curses, [$LIBPTHREAD $LIBDL -lm -lpanel -lcurses]) - KDE_TRY_LINK_PYTHON(m_and_thread_and_db_special, [$LIBPTHREAD -lm -ldb -lutil], [], - [AC_MSG_WARN([it seems, Python depends on another library. - Please set LIBPYTHON to '-lpython$version -lotherlib' before calling configure to fix this - and contact the authors to let them know about this problem]) - ]) - - LIBPYTHON="$LIBPYTHON $LIBDL $LIBSOCKET" - AC_SUBST(PYTHONINC) - AC_SUBST(PYTHONLIB) - AC_SUBST(LIBPYTHON) - AC_SUBST(PYTHONMODDIR) - AC_DEFINE(HAVE_PYTHON, 1, [Define if you have the development files for python]) -fi - -]) - - -AC_DEFUN([KDE_CHECK_PYTHON], -[ - KDE_CHECK_PYTHON_INTERN("2.5", - [KDE_CHECK_PYTHON_INTERN("2.4", - [KDE_CHECK_PYTHON_INTERN("2.3", - [KDE_CHECK_PYTHON_INTERN("2.2", - [KDE_CHECK_PYTHON_INTERN("2.1", - [KDE_CHECK_PYTHON_INTERN("2.0", - [KDE_CHECK_PYTHON_INTERN($1, $2) ]) - ]) - ]) - ]) - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_STL], -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`" - - AC_MSG_CHECKING([if C++ programs can be compiled]) - AC_CACHE_VAL(kde_cv_stl_works, - [ - AC_TRY_COMPILE([ -#include -using namespace std; -],[ - string astring="Hallo Welt."; - astring.erase(0, 6); // now astring is "Welt" - return 0; -], kde_cv_stl_works=yes, - kde_cv_stl_works=no) -]) - - AC_MSG_RESULT($kde_cv_stl_works) - - if test "$kde_cv_stl_works" = "yes"; then - # back compatible - AC_DEFINE_UNQUOTED(HAVE_SGI_STL, 1, [Define if you have a STL implementation by SGI]) - else - AC_MSG_ERROR([Your Installation isn't able to compile simple C++ programs. -Check config.log for details - if you're using a Linux distribution you might miss -a package named similar to libstdc++-dev.]) - fi - - CXXFLAGS="$ac_save_CXXFLAGS" - AC_LANG_RESTORE -]) - -AC_DEFUN([AC_FIND_QIMGIO], - [AC_REQUIRE([AC_FIND_JPEG]) -AC_REQUIRE([KDE_CHECK_EXTRA_LIBS]) -AC_MSG_CHECKING([for qimgio]) -AC_CACHE_VAL(ac_cv_lib_qimgio, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -ac_save_LIBS="$LIBS" -ac_save_CXXFLAGS="$CXXFLAGS" -LIBS="$all_libraries -lqimgio -lpng -lz $LIBJPEG $LIBQT" -CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes" -AC_TRY_RUN(dnl -[ -#include -#include -int main() { - QString t = "hallo"; - t.fill('t'); - qInitImageIO(); -} -], - ac_cv_lib_qimgio=yes, - ac_cv_lib_qimgio=no, - ac_cv_lib_qimgio=no) -LIBS="$ac_save_LIBS" -CXXFLAGS="$ac_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -if eval "test \"`echo $ac_cv_lib_qimgio`\" = yes"; then - LIBQIMGIO="-lqimgio -lpng -lz $LIBJPEG" - AC_MSG_RESULT(yes) - AC_DEFINE_UNQUOTED(HAVE_QIMGIO, 1, [Define if you have the Qt extension qimgio available]) - AC_SUBST(LIBQIMGIO) -else - AC_MSG_RESULT(not found) -fi -]) - -AC_DEFUN([AM_DISABLE_LIBRARIES], -[ - AC_PROVIDE([AM_ENABLE_STATIC]) - AC_PROVIDE([AM_ENABLE_SHARED]) - enable_static=no - enable_shared=yes -]) - - -AC_DEFUN([AC_CHECK_UTMP_FILE], -[ - AC_MSG_CHECKING([for utmp file]) - - AC_CACHE_VAL(kde_cv_utmp_file, - [ - kde_cv_utmp_file=no - - for ac_file in \ - \ - /var/run/utmp \ - /var/adm/utmp \ - /etc/utmp \ - ; \ - do - if test -r "$ac_file"; then - kde_cv_utmp_file=$ac_file - break - fi - done - ]) - - if test "$kde_cv_utmp_file" != "no"; then - AC_DEFINE_UNQUOTED(UTMP, "$kde_cv_utmp_file", [Define the file for utmp entries]) - $1 - AC_MSG_RESULT($kde_cv_utmp_file) - else - $2 - AC_MSG_RESULT([non found]) - fi -]) - - -AC_DEFUN([KDE_CREATE_SUBDIRSLIST], -[ - -DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin" -TOPSUBDIRS="" - -if test ! -s $srcdir/subdirs; then - dnl Note: Makefile.common creates subdirs, so this is just a fallback - files=`cd $srcdir && ls -1` - dirs=`for i in $files; do if test -d $i; then echo $i; fi; done` - for i in $dirs; do - echo $i >> $srcdir/subdirs - done -fi - -ac_topsubdirs= -if test -s $srcdir/inst-apps; then - ac_topsubdirs="`cat $srcdir/inst-apps`" -elif test -s $srcdir/subdirs; then - ac_topsubdirs="`cat $srcdir/subdirs`" -fi - -for i in $ac_topsubdirs; do - AC_MSG_CHECKING([if $i should be compiled]) - if test -d $srcdir/$i; then - install_it="yes" - for j in $DO_NOT_COMPILE; do - if test $i = $j; then - install_it="no" - fi - done - else - install_it="no" - fi - AC_MSG_RESULT($install_it) - vari=`echo $i | sed -e 's,[[-+.@]],_,g'` - if test $install_it = "yes"; then - TOPSUBDIRS="$TOPSUBDIRS $i" - eval "$vari""_SUBDIR_included=yes" - else - eval "$vari""_SUBDIR_included=no" - fi -done - -AC_SUBST(TOPSUBDIRS) -]) - -AC_DEFUN([KDE_CHECK_NAMESPACES], -[ -AC_MSG_CHECKING(whether C++ compiler supports namespaces) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -AC_TRY_COMPILE([ -], -[ -namespace Foo { - extern int i; - namespace Bar { - extern int i; - } -} - -int Foo::i = 0; -int Foo::Bar::i = 1; -],[ - AC_MSG_RESULT(yes) - AC_DEFINE(HAVE_NAMESPACES) -], [ -AC_MSG_RESULT(no) -]) -AC_LANG_RESTORE -]) - -dnl ------------------------------------------------------------------------ -dnl Check for S_ISSOCK macro. Doesn't exist on Unix SCO. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_S_ISSOCK], -[ -AC_MSG_CHECKING(for S_ISSOCK) -AC_CACHE_VAL(ac_cv_have_s_issock, -[ -AC_TRY_LINK( -[ -#include -], -[ -struct stat buff; -int b = S_ISSOCK( buff.st_mode ); -], -ac_cv_have_s_issock=yes, -ac_cv_have_s_issock=no) -]) -AC_MSG_RESULT($ac_cv_have_s_issock) -if test "$ac_cv_have_s_issock" = "yes"; then - AC_DEFINE_UNQUOTED(HAVE_S_ISSOCK, 1, [Define if sys/stat.h declares S_ISSOCK.]) -fi - -AH_VERBATIM(_ISSOCK, -[ -#ifndef HAVE_S_ISSOCK -#define HAVE_S_ISSOCK -#define S_ISSOCK(mode) (1==0) -#endif -]) - -]) - -dnl ------------------------------------------------------------------------ -dnl Check for MAXPATHLEN macro, defines KDEMAXPATHLEN. faure@kde.org -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([AC_CHECK_KDEMAXPATHLEN], -[ -AC_MSG_CHECKING(for MAXPATHLEN) -AC_CACHE_VAL(ac_cv_maxpathlen, -[ -cat > conftest.$ac_ext < -#endif -#include -#include -#ifndef MAXPATHLEN -#define MAXPATHLEN 1024 -#endif - -KDE_HELLO MAXPATHLEN - -EOF - -ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out" - -if AC_TRY_EVAL(ac_try) && test -s conftest.out; then - ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out` -else - ac_cv_maxpathlen=1024 -fi - -rm conftest.* - -]) -AC_MSG_RESULT($ac_cv_maxpathlen) -AC_DEFINE_UNQUOTED(KDEMAXPATHLEN,$ac_cv_maxpathlen, [Define a safe value for MAXPATHLEN] ) -]) - -AC_DEFUN([KDE_CHECK_HEADER], -[ - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_CHECK_HEADER([$1], [$2], [$3], [$4]) - AC_LANG_RESTORE - CPPFLAGS=$kde_safe_cppflags -]) - -AC_DEFUN([KDE_CHECK_HEADERS], -[ - AH_CHECK_HEADERS([$1]) - AC_LANG_SAVE - kde_safe_cppflags=$CPPFLAGS - CPPFLAGS="$CPPFLAGS $all_includes" - AC_LANG_CPLUSPLUS - AC_CHECK_HEADERS([$1], [$2], [$3], [$4]) - CPPFLAGS=$kde_safe_cppflags - AC_LANG_RESTORE -]) - -AC_DEFUN([KDE_FAST_CONFIGURE], -[ - dnl makes configure fast (needs perl) - AC_ARG_ENABLE(fast-perl, AC_HELP_STRING([--disable-fast-perl],[disable fast Makefile generation (needs perl)]), - with_fast_perl=$enableval, with_fast_perl=yes) -]) - -AC_DEFUN([KDE_CONF_FILES], -[ - val= - if test -f $srcdir/configure.files ; then - val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files` - fi - CONF_FILES= - if test -n "$val" ; then - for i in $val ; do - CONF_FILES="$CONF_FILES $i" - done - fi - AC_SUBST(CONF_FILES) -])dnl - -dnl This sets the prefix, for arts and kdelibs -dnl Do NOT use in any other module. -dnl It only looks at --prefix, KDEDIR and falls back to /usr/local/kde -AC_DEFUN([KDE_SET_PREFIX_CORE], -[ - unset CDPATH - dnl make $KDEDIR the default for the installation - AC_PREFIX_DEFAULT(${KDEDIR:-/usr/local/kde}) - - if test "x$prefix" = "xNONE"; then - prefix=$ac_default_prefix - ac_configure_args="$ac_configure_args --prefix=$prefix" - fi - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - kde_libs_prefix='$(prefix)' - kde_libs_htmldir='$(kde_htmldir)' - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - - -AC_DEFUN([KDE_SET_PREFIX], -[ - unset CDPATH - dnl We can't give real code to that macro, only a value. - dnl It only matters for --help, since we set the prefix in this function anyway. - AC_PREFIX_DEFAULT(${KDEDIR:-the kde prefix}) - - KDE_SET_DEFAULT_BINDIRS - if test "x$prefix" = "xNONE"; then - dnl no prefix given: look for kde-config in the PATH and deduce the prefix from it - KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) - else - dnl prefix given: look for kde-config, preferrably in prefix, otherwise in PATH - kde_save_PATH="$PATH" - PATH="$exec_prefix/bin:$prefix/bin:$PATH" - KDE_FIND_PATH(kde-config, KDECONFIG, [$kde_default_bindirs], [KDE_MISSING_PROG_ERROR(kde-config)], [], prepend) - PATH="$kde_save_PATH" - fi - - kde_libs_prefix=`$KDECONFIG --prefix` - if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then - AC_MSG_ERROR([$KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs. - This means it has been moved since you installed it. - This won't work. Please recompile kdelibs for the new prefix. - ]) - fi - kde_libs_htmldir=`$KDECONFIG --install html --expandvars` - - AC_MSG_CHECKING([where to install]) - if test "x$prefix" = "xNONE"; then - prefix=$kde_libs_prefix - AC_MSG_RESULT([$prefix (as returned by kde-config)]) - else - dnl --prefix was given. Compare prefixes and warn (in configure.in.bot.end) if different - given_prefix=$prefix - AC_MSG_RESULT([$prefix (as requested)]) - fi - - # And delete superfluous '/' to make compares easier - prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'` - - AC_SUBST(KDECONFIG) - AC_SUBST(kde_libs_prefix) - AC_SUBST(kde_libs_htmldir) - - KDE_FAST_CONFIGURE - KDE_CONF_FILES -]) - -pushdef([AC_PROG_INSTALL], -[ - dnl our own version, testing for a -p flag - popdef([AC_PROG_INSTALL]) - dnl as AC_PROG_INSTALL works as it works we first have - dnl to save if the user didn't specify INSTALL, as the - dnl autoconf one overwrites INSTALL and we have no chance to find - dnl out afterwards - test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL - test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM - test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT - AC_PROG_INSTALL - - if test -z "$kde_save_INSTALL_given" ; then - # OK, user hasn't given any INSTALL, autoconf found one for us - # now we test, if it supports the -p flag - AC_MSG_CHECKING(for -p flag to install) - rm -f confinst.$$.* > /dev/null 2>&1 - echo "Testtest" > confinst.$$.orig - ac_res=no - if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then - if test -f confinst.$$.new ; then - # OK, -p seems to do no harm to install - INSTALL="${INSTALL} -p" - ac_res=yes - fi - fi - rm -f confinst.$$.* - AC_MSG_RESULT($ac_res) - fi - dnl the following tries to resolve some signs and wonders coming up - dnl with different autoconf/automake versions - dnl e.g.: - dnl *automake 1.4 install-strip sets A_M_INSTALL_PROGRAM_FLAGS to -s - dnl and has INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(A_M_INSTALL_PROGRAM_FLAGS) - dnl it header-vars.am, so there the actual INSTALL_PROGRAM gets the -s - dnl *automake 1.4a (and above) use INSTALL_STRIP_FLAG and only has - dnl INSTALL_PROGRAM = @INSTALL_PROGRAM@ there, but changes the - dnl install-@DIR@PROGRAMS targets to explicitly use that flag - dnl *autoconf 2.13 is dumb, and thinks it can use INSTALL_PROGRAM as - dnl INSTALL_SCRIPT, which breaks with automake <= 1.4 - dnl *autoconf >2.13 (since 10.Apr 1999) has not that failure - dnl *sometimes KDE does not use the install-@DIR@PROGRAM targets from - dnl automake (due to broken Makefile.am or whatever) to install programs, - dnl and so does not see the -s flag in automake > 1.4 - dnl to clean up that mess we: - dnl +set INSTALL_PROGRAM to use INSTALL_STRIP_FLAG - dnl which cleans KDE's program with automake > 1.4; - dnl +set INSTALL_SCRIPT to only use INSTALL, to clean up autoconf's problems - dnl with automake<=1.4 - dnl note that dues to this sometimes two '-s' flags are used (if KDE - dnl properly uses install-@DIR@PROGRAMS, but I don't care - dnl - dnl And to all this comes, that I even can't write in comments variable - dnl names used by automake, because it is so stupid to think I wanted to - dnl _use_ them, therefor I have written A_M_... instead of AM_ - dnl hmm, I wanted to say something ... ahh yes: Arghhh. - - if test -z "$kde_save_INSTALL_PROGRAM_given" ; then - INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)' - fi - if test -z "$kde_save_INSTALL_SCRIPT_given" ; then - INSTALL_SCRIPT='${INSTALL}' - fi -])dnl - -AC_DEFUN([KDE_LANG_CPLUSPLUS], -[AC_LANG_CPLUSPLUS -ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC' -pushdef([AC_LANG_CPLUSPLUS], [popdef([AC_LANG_CPLUSPLUS]) KDE_LANG_CPLUSPLUS]) -]) - -pushdef([AC_LANG_CPLUSPLUS], -[popdef([AC_LANG_CPLUSPLUS]) -KDE_LANG_CPLUSPLUS -]) - -AC_DEFUN([KDE_CHECK_LONG_LONG], -[ -AC_MSG_CHECKING(for long long) -AC_CACHE_VAL(kde_cv_c_long_long, -[ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - AC_TRY_LINK([], [ - long long foo = 0; - foo = foo+1; - ], - kde_cv_c_long_long=yes, kde_cv_c_long_long=no) - AC_LANG_RESTORE -]) -AC_MSG_RESULT($kde_cv_c_long_long) -if test "$kde_cv_c_long_long" = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if you have long long as datatype]) -fi -]) - -AC_DEFUN([KDE_CHECK_LIB], -[ - kde_save_LDFLAGS="$LDFLAGS" - dnl AC_CHECK_LIB modifies LIBS, so save it here - kde_save_LIBS="$LIBS" - LDFLAGS="$LDFLAGS $all_libraries" - case $host_os in - aix*) LDFLAGS="-brtl $LDFLAGS" - test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS" - ;; - esac - AC_CHECK_LIB($1, $2, $3, $4, $5) - LDFLAGS="$kde_save_LDFLAGS" - LIBS="$kde_save_LIBS" -]) - -AC_DEFUN([KDE_JAVA_PREFIX], -[ - dir=`dirname "$1"` - base=`basename "$1"` - list=`ls -1 $dir 2> /dev/null` - for entry in $list; do - if test -d $dir/$entry/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/bin" - ;; - esac - elif test -d $dir/$entry/jre/bin; then - case $entry in - $base) - javadirs="$javadirs $dir/$entry/jre/bin" - ;; - esac - fi - done -]) - -dnl KDE_CHEC_JAVA_DIR(onlyjre) -AC_DEFUN([KDE_CHECK_JAVA_DIR], -[ - -AC_ARG_WITH(java, -AC_HELP_STRING([--with-java=javadir],[use java installed in javadir, --without-java disables]), -[ ac_java_dir=$withval -], ac_java_dir="" -) - -AC_MSG_CHECKING([for Java]) - -dnl at this point ac_java_dir is either a dir, 'no' to disable, or '' to say look in $PATH -if test "x$ac_java_dir" = "xno"; then - kde_java_bindir=no - kde_java_includedir=no - kde_java_libjvmdir=no - kde_java_libgcjdir=no - kde_java_libhpidir=no -else - if test "x$ac_java_dir" = "x"; then - - - dnl No option set -> collect list of candidate paths - if test -n "$JAVA_HOME"; then - KDE_JAVA_PREFIX($JAVA_HOME) - fi - KDE_JAVA_PREFIX(/usr/j2se) - KDE_JAVA_PREFIX(/usr/lib/j2se) - KDE_JAVA_PREFIX(/usr/j*dk*) - KDE_JAVA_PREFIX(/usr/lib/j*dk*) - KDE_JAVA_PREFIX(/opt/j*sdk*) - KDE_JAVA_PREFIX(/usr/lib/java*) - KDE_JAVA_PREFIX(/usr/java*) - KDE_JAVA_PREFIX(/usr/java/j*dk*) - KDE_JAVA_PREFIX(/usr/java/j*re*) - KDE_JAVA_PREFIX(/usr/lib/SunJava2*) - KDE_JAVA_PREFIX(/usr/lib/SunJava*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava2*) - KDE_JAVA_PREFIX(/usr/lib/IBMJava*) - KDE_JAVA_PREFIX(/opt/java*) - - kde_cv_path="NONE" - kde_save_IFS=$IFS - IFS=':' - for dir in $PATH; do - if test -d "$dir"; then - javadirs="$javadirs $dir" - fi - done - IFS=$kde_save_IFS - jredirs= - - dnl Now javadirs contains a list of paths that exist, all ending with bin/ - for dir in $javadirs; do - dnl Check for the java executable - if test -x "$dir/java"; then - sane_path=$(cd $dir; /bin/pwd) - dnl And also check for a libjvm.so somewhere under there - dnl Since we have to go to the parent dir, /usr/bin is excluded, /usr is too big. - if test "$sane_path" != "/usr/bin"; then - libjvmdir=`find $dir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - if test ! -f $libjvmdir/libjvm.so; then continue; fi - jredirs="$jredirs $dir" - fi - fi - done - - dnl Now jredirs contains a reduced list, of paths where both java and ../**/libjvm.so was found - JAVAC= - JAVA= - kde_java_bindir=no - for dir in $jredirs; do - JAVA="$dir/java" - kde_java_bindir=$dir - if test -x "$dir/javac"; then - JAVAC="$dir/javac" - break - fi - done - - if test -n "$JAVAC"; then - dnl this substitution might not work - well, we test for jni.h below - kde_java_includedir=`echo $JAVAC | sed -e 's,bin/javac$,include/,'` - else - kde_java_includedir=no - fi - else - dnl config option set - kde_java_bindir=$ac_java_dir/bin - if test -x $ac_java_dir/bin/java && test ! -x $ac_java_dir/bin/javac; then - kde_java_includedir=no - else - kde_java_includedir=$ac_java_dir/include - fi - fi -fi - -dnl At this point kde_java_bindir and kde_java_includedir are either set or "no" -if test "x$kde_java_bindir" != "xno"; then - - dnl Look for libjvm.so - kde_java_libjvmdir=`find $kde_java_bindir/.. -name libjvm.so | sed 's,libjvm.so,,'|head -n 1` - dnl Look for libgcj.so - kde_java_libgcjdir=`find $kde_java_bindir/.. -name libgcj.so | sed 's,libgcj.so,,'|head -n 1` - dnl Look for libhpi.so and avoid green threads - kde_java_libhpidir=`find $kde_java_bindir/.. -name libhpi.so | grep -v green | sed 's,libhpi.so,,' | head -n 1` - - dnl Now check everything's fine under there - dnl the include dir is our flag for having the JDK - if test -d "$kde_java_includedir"; then - if test ! -x "$kde_java_bindir/javac"; then - AC_MSG_ERROR([javac not found under $kde_java_bindir - it seems you passed a wrong --with-java.]) - fi - if test ! -x "$kde_java_bindir/javah"; then - AC_MSG_ERROR([javah not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -x "$kde_java_bindir/jar"; then - AC_MSG_ERROR([jar not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - if test ! -r "$kde_java_includedir/jni.h"; then - AC_MSG_ERROR([jni.h not found under $kde_java_includedir. Use --with-java or --without-java.]) - fi - - jni_includes="-I$kde_java_includedir" - dnl Strange thing, jni.h requires jni_md.h which is under genunix here.. - dnl and under linux here.. - - dnl not needed for gcj - - if test "x$kde_java_libgcjdir" = "x"; then - test -d "$kde_java_includedir/linux" && jni_includes="$jni_includes -I$kde_java_includedir/linux" - test -d "$kde_java_includedir/solaris" && jni_includes="$jni_includes -I$kde_java_includedir/solaris" - test -d "$kde_java_includedir/genunix" && jni_includes="$jni_includes -I$kde_java_includedir/genunix" - fi - - else - JAVAC= - jni_includes= - fi - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libjvmdir/libjvm.so"; then - AC_MSG_ERROR([libjvm.so not found under $kde_java_libjvmdir. Use --without-java.]) - fi - else - if test ! -r "$kde_java_libgcjdir/libgcj.so"; then - AC_MSG_ERROR([libgcj.so not found under $kde_java_libgcjdir. Use --without-java.]) - fi - fi - - if test ! -x "$kde_java_bindir/java"; then - AC_MSG_ERROR([java not found under $kde_java_bindir. javac was found though! Use --with-java or --without-java.]) - fi - - dnl not needed for gcj compile - - if test "x$kde_java_libgcjdir" = "x"; then - if test ! -r "$kde_java_libhpidir/libhpi.so"; then - AC_MSG_ERROR([libhpi.so not found under $kde_java_libhpidir. Use --without-java.]) - fi - fi - - if test -n "$jni_includes"; then - dnl Check for JNI version - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - ac_cxxflags_safe="$CXXFLAGS" - CXXFLAGS="$CXXFLAGS $all_includes $jni_includes" - - AC_TRY_COMPILE([ - #include - ], - [ - #ifndef JNI_VERSION_1_2 - Syntax Error - #endif - ],[ kde_jni_works=yes ], - [ kde_jni_works=no ]) - - if test $kde_jni_works = no; then - AC_MSG_ERROR([Incorrect version of $kde_java_includedir/jni.h. - You need to have Java Development Kit (JDK) version 1.2. - - Use --with-java to specify another location. - Use --without-java to configure without java support. - Or download a newer JDK and try again. - See e.g. http://java.sun.com/products/jdk/1.2 ]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - AC_LANG_RESTORE - - dnl All tests ok, inform and subst the variables - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - if test "x$kde_java_libgcjdir" = "x"; then - JVMLIBS="-L$kde_java_libjvmdir -ljvm -L$kde_java_libhpidir -lhpi" - else - JVMLIBS="-L$kde_java_libgcjdir -lgcj" - fi - AC_MSG_RESULT([java JDK in $kde_java_bindir]) - - else - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([java JRE in $kde_java_bindir]) - fi -elif test -d "/Library/Java/Home"; then - kde_java_bindir="/Library/Java/Home/bin" - jni_includes="-I/Library/Java/Home/include" - - JAVAC=$kde_java_bindir/javac - JAVAH=$kde_java_bindir/javah - JAR=$kde_java_bindir/jar - JVMLIBS="-Wl,-framework,JavaVM" - - AC_DEFINE_UNQUOTED(PATH_JAVA, "$kde_java_bindir/java", [Define where your java executable is]) - AC_MSG_RESULT([Apple Java Framework]) -else - AC_MSG_RESULT([none found]) -fi - -AC_SUBST(JAVAC) -AC_SUBST(JAVAH) -AC_SUBST(JAR) -AC_SUBST(JVMLIBS) -AC_SUBST(jni_includes) - -# for backward compat -kde_cv_java_includedir=$kde_java_includedir -kde_cv_java_bindir=$kde_java_bindir -]) - -dnl this is a redefinition of autoconf 2.5x's AC_FOREACH. -dnl When the argument list becomes big, as in KDE for AC_OUTPUT in -dnl big packages, m4_foreach is dog-slow. So use our own version of -dnl it. (matz@kde.org) -m4_define([mm_foreach], -[m4_pushdef([$1])_mm_foreach($@)m4_popdef([$1])]) -m4_define([mm_car], [[$1]]) -m4_define([mm_car2], [[$@]]) -m4_define([_mm_foreach], -[m4_if(m4_quote($2), [], [], - [m4_define([$1], mm_car($2))$3[]_mm_foreach([$1], - mm_car2(m4_shift($2)), - [$3])])]) -m4_define([AC_FOREACH], -[mm_foreach([$1], m4_split(m4_normalize([$2])), [$3])]) - -AC_DEFUN([KDE_NEED_FLEX], -[ -kde_libs_safe=$LIBS -LIBS="$LIBS $USER_LDFLAGS" -AM_PROG_LEX -LIBS=$kde_libs_safe -if test -z "$LEXLIB"; then - AC_MSG_ERROR([You need to have flex installed.]) -fi -AC_SUBST(LEXLIB) -]) - -AC_DEFUN([AC_PATH_QTOPIA], -[ - dnl TODO: use AC_CACHE_VAL - - if test -z "$1"; then - qtopia_minver_maj=1 - qtopia_minver_min=5 - qtopia_minver_pat=0 - else - qtopia_minver_maj=`echo "$1" | sed -e "s/^\(.*\)\..*\..*$/\1/"` - qtopia_minver_min=`echo "$1" | sed -e "s/^.*\.\(.*\)\..*$/\1/"` - qtopia_minver_pat=`echo "$1" | sed -e "s/^.*\..*\.\(.*\)$/\1/"` - fi - - qtopia_minver="$qtopia_minver_maj$qtopia_minver_min$qtopia_minver_pat" - qtopia_minverstr="$qtopia_minver_maj.$qtopia_minver_min.$qtopia_minver_pat" - - AC_REQUIRE([AC_PATH_QT]) - - AC_MSG_CHECKING([for Qtopia]) - - LIB_QTOPIA="-lqpe" - AC_SUBST(LIB_QTOPIA) - - kde_qtopia_dirs="$QPEDIR /opt/Qtopia" - - ac_qtopia_incdir=NO - - AC_ARG_WITH(qtopia-dir, - AC_HELP_STRING([--with-qtopia-dir=DIR],[where the root of Qtopia is installed]), - [ ac_qtopia_incdir="$withval"/include] ) - - qtopia_incdirs="" - for dir in $kde_qtopia_dirs; do - qtopia_incdirs="$qtopia_incdirs $dir/include" - done - - if test ! "$ac_qtopia_incdir" = "NO"; then - qtopia_incdirs="$ac_qtopia_incdir $qtopia_incdirs" - fi - - qtopia_incdir="" - AC_FIND_FILE(qpe/qpeapplication.h, $qtopia_incdirs, qtopia_incdir) - ac_qtopia_incdir="$qtopia_incdir" - - if test -z "$qtopia_incdir"; then - AC_MSG_ERROR([Cannot find Qtopia headers. Please check your installation.]) - fi - - qtopia_ver_maj=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION "\(.*\)\..*\..*".*,\1,p'`; - qtopia_ver_min=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\.\(.*\)\..*".*,\1,p'`; - qtopia_ver_pat=`cat $qtopia_incdir/qpe/version.h | sed -n -e 's,.*QPE_VERSION ".*\..*\.\(.*\)".*,\1,p'`; - - qtopia_ver="$qtopia_ver_maj$qtopia_ver_min$qtopia_ver_pat" - qtopia_verstr="$qtopia_ver_maj.$qtopia_ver_min.$qtopia_ver_pat" - if test "$qtopia_ver" -lt "$qtopia_minver"; then - AC_MSG_ERROR([found Qtopia version $qtopia_verstr but version $qtopia_minverstr -is required.]) - fi - - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - - ac_cxxflags_safe="$CXXFLAGS" - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - CXXFLAGS="$CXXFLAGS -I$qtopia_incdir $all_includes" - LDFLAGS="$LDFLAGS $QT_LDFLAGS $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS" - LIBS="$LIBS $LIB_QTOPIA $LIBQT" - - cat > conftest.$ac_ext < -#include - -int main( int argc, char **argv ) -{ - QPEApplication app( argc, argv ); - return 0; -} -EOF - - if AC_TRY_EVAL(ac_link) && test -s conftest; then - rm -f conftest* - else - rm -f conftest* - AC_MSG_ERROR([Cannot link small Qtopia Application. For more details look at -the end of config.log]) - fi - - CXXFLAGS="$ac_cxxflags_safe" - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - AC_LANG_RESTORE - - QTOPIA_INCLUDES="-I$qtopia_incdir" - AC_SUBST(QTOPIA_INCLUDES) - - AC_MSG_RESULT([found version $qtopia_verstr with headers at $qtopia_incdir]) -]) - - -AC_DEFUN([KDE_INIT_DOXYGEN], -[ -AC_MSG_CHECKING([for Qt docs]) -kde_qtdir= -if test "${with_qt_dir+set}" = set; then - kde_qtdir="$with_qt_dir" -fi - -AC_FIND_FILE(qsql.html, [ $kde_qtdir/doc/html $QTDIR/doc/html /usr/share/doc/packages/qt3/html /usr/lib/qt/doc /usr/lib/qt3/doc /usr/lib/qt3/doc/html /usr/doc/qt3/html /usr/doc/qt3 /usr/share/doc/qt3-doc /usr/share/qt3/doc/html /usr/X11R6/share/doc/qt/html ], QTDOCDIR) -AC_MSG_RESULT($QTDOCDIR) - -AC_SUBST(QTDOCDIR) - -KDE_FIND_PATH(dot, DOT, [], []) -if test -n "$DOT"; then - KDE_HAVE_DOT="YES" -else - KDE_HAVE_DOT="NO" -fi -AC_SUBST(KDE_HAVE_DOT) -KDE_FIND_PATH(doxygen, DOXYGEN, [], []) -AC_SUBST(DOXYGEN) - -DOXYGEN_PROJECT_NAME="$1" -DOXYGEN_PROJECT_NUMBER="$2" -AC_SUBST(DOXYGEN_PROJECT_NAME) -AC_SUBST(DOXYGEN_PROJECT_NUMBER) - -KDE_HAS_DOXYGEN=no -if test -n "$DOXYGEN" && test -x "$DOXYGEN" && test -f $QTDOCDIR/qsql.html; then - KDE_HAS_DOXYGEN=yes -fi -AC_SUBST(KDE_HAS_DOXYGEN) - -]) - - -AC_DEFUN([AC_FIND_BZIP2], -[ -AC_MSG_CHECKING([for bzDecompress in libbz2]) -AC_CACHE_VAL(ac_cv_lib_bzip2, -[ -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -kde_save_LIBS="$LIBS" -LIBS="$all_libraries $USER_LDFLAGS -lbz2 $LIBSOCKET" -kde_save_CXXFLAGS="$CXXFLAGS" -CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES" -AC_TRY_LINK(dnl -[ -#define BZ_NO_STDIO -#include -], - [ bz_stream s; (void) bzDecompress(&s); ], - eval "ac_cv_lib_bzip2='-lbz2'", - eval "ac_cv_lib_bzip2=no") -LIBS="$kde_save_LIBS" -CXXFLAGS="$kde_save_CXXFLAGS" -AC_LANG_RESTORE -])dnl -AC_MSG_RESULT($ac_cv_lib_bzip2) - -if test ! "$ac_cv_lib_bzip2" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2" - AC_SUBST(LIBBZ2) - -else - - cxx_shared_flag= - ld_shared_flag= - KDE_CHECK_COMPILER_FLAG(shared, [ - ld_shared_flag="-shared" - ]) - KDE_CHECK_COMPILER_FLAG(fPIC, [ - cxx_shared_flag="-fPIC" - ]) - - AC_MSG_CHECKING([for BZ2_bzDecompress in (shared) libbz2]) - AC_CACHE_VAL(ac_cv_lib_bzip2_prefix, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - kde_save_LIBS="$LIBS" - LIBS="$all_libraries $USER_LDFLAGS $ld_shared_flag -lbz2 $LIBSOCKET" - kde_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS="$CFLAGS $cxx_shared_flag $all_includes $USER_INCLUDES" - - AC_TRY_LINK(dnl - [ - #define BZ_NO_STDIO - #include - ], - [ bz_stream s; (void) BZ2_bzDecompress(&s); ], - eval "ac_cv_lib_bzip2_prefix='-lbz2'", - eval "ac_cv_lib_bzip2_prefix=no") - LIBS="$kde_save_LIBS" - CXXFLAGS="$kde_save_CXXFLAGS" - AC_LANG_RESTORE - ])dnl - - AC_MSG_RESULT($ac_cv_lib_bzip2_prefix) - - if test ! "$ac_cv_lib_bzip2_prefix" = no; then - BZIP2DIR=bzip2 - - LIBBZ2="$ac_cv_lib_bzip2_prefix" - AC_SUBST(LIBBZ2) - - AC_DEFINE(NEED_BZ2_PREFIX, 1, [Define if the libbz2 functions need the BZ2_ prefix]) - dnl else, we just ignore this - fi - -fi -AM_CONDITIONAL(include_BZIP2, test -n "$BZIP2DIR") -]) - -dnl ------------------------------------------------------------------------ -dnl Try to find the SSL headers and libraries. -dnl $(SSL_LDFLAGS) will be -Lsslliblocation (if needed) -dnl and $(SSL_INCLUDES) will be -Isslhdrlocation (if needed) -dnl ------------------------------------------------------------------------ -dnl -AC_DEFUN([KDE_CHECK_SSL], -[ -LIBSSL="-lssl -lcrypto" -AC_REQUIRE([KDE_CHECK_LIB64]) - -ac_ssl_includes=NO ac_ssl_libraries=NO -ssl_libraries="" -ssl_includes="" -AC_ARG_WITH(ssl-dir, - AC_HELP_STRING([--with-ssl-dir=DIR],[where the root of OpenSSL is installed]), - [ ac_ssl_includes="$withval"/include - ac_ssl_libraries="$withval"/lib$kdelibsuff - ]) - -want_ssl=yes -AC_ARG_WITH(ssl, - AC_HELP_STRING([--without-ssl],[disable SSL checks]), - [want_ssl=$withval]) - -if test $want_ssl = yes; then - -AC_MSG_CHECKING(for OpenSSL) - -AC_CACHE_VAL(ac_cv_have_ssl, -[#try to guess OpenSSL locations - - ssl_incdirs="/usr/include /usr/local/include /usr/ssl/include /usr/local/ssl/include $prefix/include $kde_extra_includes" - ssl_incdirs="$ac_ssl_includes $ssl_incdirs" - AC_FIND_FILE(openssl/ssl.h, $ssl_incdirs, ssl_incdir) - ac_ssl_includes="$ssl_incdir" - - ssl_libdirs="/usr/lib$kdelibsuff /usr/local/lib$kdelibsuff /usr/ssl/lib$kdelibsuff /usr/local/ssl/lib$kdelibsuff $libdir $prefix/lib$kdelibsuff $exec_prefix/lib$kdelibsuff $kde_extra_libs" - if test ! "$ac_ssl_libraries" = "NO"; then - ssl_libdirs="$ac_ssl_libraries $ssl_libdirs" - fi - - test=NONE - ssl_libdir=NONE - for dir in $ssl_libdirs; do - try="ls -1 $dir/libssl*" - if test=`eval $try 2> /dev/null`; then ssl_libdir=$dir; break; else echo "tried $dir" >&AC_FD_CC ; fi - done - - ac_ssl_libraries="$ssl_libdir" - - ac_ldflags_safe="$LDFLAGS" - ac_libs_safe="$LIBS" - - LDFLAGS="$LDFLAGS -L$ssl_libdir $all_libraries" - LIBS="$LIBS $LIBSSL -lRSAglue -lrsaref" - - AC_TRY_LINK(,void RSAPrivateEncrypt(void);RSAPrivateEncrypt();, - ac_ssl_rsaref="yes" - , - ac_ssl_rsaref="no" - ) - - LDFLAGS="$ac_ldflags_safe" - LIBS="$ac_libs_safe" - - if test "$ac_ssl_includes" = NO || test "$ac_ssl_libraries" = NO; then - have_ssl=no - else - have_ssl=yes; - fi - - ]) - - eval "$ac_cv_have_ssl" - - AC_MSG_RESULT([libraries $ac_ssl_libraries, headers $ac_ssl_includes]) - - AC_MSG_CHECKING([whether OpenSSL uses rsaref]) - AC_MSG_RESULT($ac_ssl_rsaref) - - AC_MSG_CHECKING([for easter eggs]) - AC_MSG_RESULT([none found]) - -else - have_ssl=no -fi - -if test "$have_ssl" = yes; then - AC_MSG_CHECKING(for OpenSSL version) - dnl Check for SSL version - AC_CACHE_VAL(ac_cv_ssl_version, - [ - - cat >conftest.$ac_ext < -#include - int main() { - -#ifndef OPENSSL_VERSION_NUMBER - printf("ssl_version=\\"error\\"\n"); -#else - if (OPENSSL_VERSION_NUMBER < 0x00906000) - printf("ssl_version=\\"old\\"\n"); - else - printf("ssl_version=\\"ok\\"\n"); -#endif - return (0); - } -EOF - - ac_save_CPPFLAGS=$CPPFLAGS - if test "$ac_ssl_includes" != "/usr/include"; then - CPPFLAGS="$CPPFLAGS -I$ac_ssl_includes" - fi - - if AC_TRY_EVAL(ac_link); then - - if eval `./conftest 2>&5`; then - if test $ssl_version = error; then - AC_MSG_ERROR([$ssl_incdir/openssl/opensslv.h doesn't define OPENSSL_VERSION_NUMBER !]) - else - if test $ssl_version = old; then - AC_MSG_WARN([OpenSSL version too old. Upgrade to 0.9.6 at least, see http://www.openssl.org. SSL support disabled.]) - have_ssl=no - fi - fi - ac_cv_ssl_version="ssl_version=$ssl_version" - else - AC_MSG_ERROR([Your system couldn't run a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - - else - AC_MSG_ERROR([Your system couldn't link a small SSL test program. - Check config.log, and if you can't figure it out, send a mail to - David Faure , attaching your config.log]) - fi - CPPFLAGS=$ac_save_CPPFLAGS - - ]) - - eval "$ac_cv_ssl_version" - AC_MSG_RESULT($ssl_version) -fi - -if test "$have_ssl" != yes; then - LIBSSL=""; -else - AC_DEFINE(HAVE_SSL, 1, [If we are going to use OpenSSL]) - ac_cv_have_ssl="have_ssl=yes \ - ac_ssl_includes=$ac_ssl_includes ac_ssl_libraries=$ac_ssl_libraries ac_ssl_rsaref=$ac_ssl_rsaref" - - - ssl_libraries="$ac_ssl_libraries" - ssl_includes="$ac_ssl_includes" - - if test "$ac_ssl_rsaref" = yes; then - LIBSSL="-lssl -lcrypto -lRSAglue -lrsaref" - fi - - if test $ssl_version = "old"; then - AC_DEFINE(HAVE_OLD_SSL_API, 1, [Define if you have OpenSSL < 0.9.6]) - fi -fi - -SSL_INCLUDES= - -if test "$ssl_includes" = "/usr/include"; then - if test -f /usr/kerberos/include/krb5.h; then - SSL_INCLUDES="-I/usr/kerberos/include" - fi -elif test "$ssl_includes" != "/usr/local/include" && test -n "$ssl_includes"; then - SSL_INCLUDES="-I$ssl_includes" -fi - -if test "$ssl_libraries" = "/usr/lib" || test "$ssl_libraries" = "/usr/local/lib" || test -z "$ssl_libraries" || test "$ssl_libraries" = "NONE"; then - SSL_LDFLAGS="" -else - SSL_LDFLAGS="-L$ssl_libraries -R$ssl_libraries" -fi - -AC_SUBST(SSL_INCLUDES) -AC_SUBST(SSL_LDFLAGS) -AC_SUBST(LIBSSL) -]) - -AC_DEFUN([KDE_CHECK_STRLCPY], -[ - AC_REQUIRE([AC_CHECK_STRLCAT]) - AC_REQUIRE([AC_CHECK_STRLCPY]) - AC_CHECK_SIZEOF(size_t) - AC_CHECK_SIZEOF(unsigned long) - - AC_MSG_CHECKING([sizeof size_t == sizeof unsigned long]) - AC_TRY_COMPILE(,[ - #if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG - choke me - #endif - ],AC_MSG_RESULT([yes]),[ - AC_MSG_RESULT(no) - AC_MSG_ERROR([ - Apparently on your system our assumption sizeof size_t == sizeof unsigned long - does not apply. Please mail kde-devel@kde.org with a description of your system! - ]) - ]) -]) - -AC_DEFUN([KDE_CHECK_BINUTILS], -[ - AC_MSG_CHECKING([if ld supports unversioned version maps]) - - kde_save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map" - echo "{ local: extern \"C++\" { foo }; };" > conftest.map - AC_TRY_LINK([int foo;], -[ -#ifdef __INTEL_COMPILER -icc apparently does not support libtools version-info and version-script -at the same time. Dunno where the bug is, but until somebody figured out, -better disable the optional version scripts. -#endif - - foo = 42; -], kde_supports_versionmaps=yes, kde_supports_versionmaps=no) - LDFLAGS="$kde_save_LDFLAGS" - rm -f conftest.map - AM_CONDITIONAL(include_VERSION_SCRIPT, - [test "$kde_supports_versionmaps" = "yes" && test "$kde_use_debug_code" = "no"]) - - AC_MSG_RESULT($kde_supports_versionmaps) -]) - -AC_DEFUN([AM_PROG_OBJC],[ -AC_CHECK_PROGS(OBJC, gcc, gcc) -test -z "$OBJC" && AC_MSG_ERROR([no acceptable objective-c gcc found in \$PATH]) -if test "x${OBJCFLAGS-unset}" = xunset; then - OBJCFLAGS="-g -O2" -fi -AC_SUBST(OBJCFLAGS) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES(OBJC)]) -]) - -AC_DEFUN([KDE_CHECK_PERL], -[ - KDE_FIND_PATH(perl, PERL, [$bindir $exec_prefix/bin $prefix/bin], [ - AC_MSG_ERROR([No Perl found in your $PATH. -We need perl to generate some code.]) - ]) - AC_SUBST(PERL) -]) - -AC_DEFUN([KDE_CHECK_LARGEFILE], -[ -AC_SYS_LARGEFILE -if test "$ac_cv_sys_file_offset_bits" != no; then - CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits" -fi - -if test "x$ac_cv_sys_large_files" != "xno"; then - CPPFLAGS="$CPPFLAGS -D_LARGE_FILES=1" -fi - -]) - -dnl A small extension to PKG_CHECK_MODULES (defined in pkg.m4.in) -dnl which allows to search for libs that get installed into the KDE prefix. -dnl -dnl Syntax: KDE_PKG_CHECK_MODULES(KSTUFF, libkexif >= 0.2 glib = 1.3.4, action-if, action-not) -dnl defines KSTUFF_LIBS, KSTUFF_CFLAGS, see pkg-config man page -dnl also defines KSTUFF_PKG_ERRORS on error -AC_DEFUN([KDE_PKG_CHECK_MODULES], [ - - PKG_CONFIG_PATH="$prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" - if test "$prefix" != "$kde_libs_prefix"; then - PKG_CONFIG_PATH="$kde_libs_prefix/lib${kdelibsuff}/pkgconfig:$PKG_CONFIG_PATH" - fi - export PKG_CONFIG_PATH - PKG_CHECK_MODULES([$1],[$2],[$3],[$4]) -]) - - -dnl Check for PIE support in the compiler and linker -AC_DEFUN([KDE_CHECK_PIE_SUPPORT], -[ - AC_CACHE_CHECK([for PIE support], kde_cv_val_pie_support, - [ - AC_LANG_SAVE - AC_LANG_CPLUSPLUS - safe_CXXFLAGS=$CXXFLAGS - safe_LDFLAGS=$LDFLAGS - CXXFLAGS="$CXXFLAGS -fPIE" - LDFLAGS="$LDFLAGS -pie" - - AC_TRY_LINK([int foo;], [], [kde_cv_val_pie_support=yes], [kde_cv_val_pie_support=no]) - - CXXFLAGS=$safe_CXXFLAGS - LDFLAGS=$safe_LDFLAGS - AC_LANG_RESTORE - ]) - - AC_MSG_CHECKING(if enabling -pie/fPIE support) - - AC_ARG_ENABLE(pie, - AC_HELP_STRING([--enable-pie],[platform supports PIE linking [default=detect]]), - [kde_has_pie_support=$enableval], - [kde_has_pie_support=detect]) - - if test "$kde_has_pie_support" = "detect"; then - kde_has_pie_support=$kde_cv_val_pie_support - fi - - AC_MSG_RESULT([$kde_has_pie_support]) - - KDE_USE_FPIE="" - KDE_USE_PIE="" - - AC_SUBST([KDE_USE_FPIE]) - AC_SUBST([KDE_USE_PIE]) - - if test "$kde_has_pie_support" = "yes"; then - KDE_USE_FPIE="-fPIE" - KDE_USE_PIE="-pie" - fi -]) diff --git a/admin/am_edit b/admin/am_edit deleted file mode 100644 index 108eb67..0000000 --- a/admin/am_edit +++ /dev/null @@ -1,2445 +0,0 @@ -#!/usr/bin/perl -w - -# Expands the specialised KDE tags in Makefile.in to (hopefully) valid -# make syntax. -# When called without file parameters, we work recursively on all Makefile.in -# in and below the current subdirectory. When called with file parameters, -# only those Makefile.in are changed. -# The currently supported tags are -# -# {program}_METASOURCES -# where you have a choice of two styles -# {program}_METASOURCES = name1.moc name2.moc ... [\] -# {program}_METASOURCES = AUTO -# The second style requires other tags as well. -# -# To install icons : -# KDE_ICON = iconname iconname2 ... -# KDE_ICON = AUTO -# -# For documentation : -# http://developer.kde.org/documentation/other/developer-faq.html -# -# and more new tags TBD! -# -# The concept (and base code) for this program came from automoc, -# supplied by the following -# -# Matthias Ettrich (The originator) -# Kalle Dalheimer (The original implementator) -# Harri Porten -# Alex Zepeda -# David Faure -# Stephan Kulow -# Dirk Mueller - -use Cwd; -use File::Find; -use File::Basename; - -# Prototype the functions -sub initialise (); -sub processMakefile ($); -sub updateMakefile (); -sub restoreMakefile (); - -sub removeLine ($$); -sub appendLines ($); -sub substituteLine ($$); - -sub findMocCandidates (); -sub pruneMocCandidates ($); -sub checkMocCandidates (); -sub addMocRules (); -sub findKcfgFile($); - -sub tag_AUTOMAKE (); -sub tag_META_INCLUDES (); -sub tag_METASOURCES (); -sub tag_POFILES (); -sub tag_DOCFILES (); -sub tag_LOCALINSTALL(); -sub tag_IDLFILES(); -sub tag_UIFILES(); -sub tag_KCFGFILES(); -sub tag_SUBDIRS(); -sub tag_ICON(); -sub tag_CLOSURE(); -sub tag_NO_UNDEFINED(); -sub tag_NMCHECK(); -sub tag_DIST(); -sub tag_KDEINIT(); - -# Some global globals... -$verbose = 0; # a debug flag -$thisProg = "$0"; # This programs name -$topdir = cwd(); # The current directory -@makefiles = (); # Contains all the files we'll process -@foreignfiles = (); -$start = (times)[0]; # some stats for testing - comment out for release -$version = "v0.2"; -$errorflag = 0; -$cppExt = "(cpp|cc|cxx|C|c\\+\\+)"; -$hExt = "(h|H|hh|hxx|hpp|h\\+\\+)"; -$progId = "KDE tags expanded automatically by " . basename($thisProg); -$automkCall = "\n"; -$printname = ""; # used to display the directory the Makefile is in -$use_final = 1; # create code for --enable-final -$cleantarget = "clean"; -$dryrun = 0; -$pathoption = 0; -$foreign_libtool = 0; - -while (defined ($ARGV[0])) -{ - $_ = shift; - if (/^--version$/) - { - print STDOUT "\n"; - print STDOUT basename($thisProg), " $version\n", - "This is really free software, unencumbered by the GPL.\n", - "You can do anything you like with it except sueing me.\n", - "Copyright 1998 Kalle Dalheimer \n", - "Concept, design and unnecessary questions about perl\n", - " by Matthias Ettrich \n\n", - "Making it useful by Stephan Kulow and\n", - "Harri Porten \n", - "Updated (Feb-1999), John Birch \n", - "Fixes and Improvements by Dirk Mueller \n", - "Current Maintainer Stephan Kulow\n\n"; - exit 0; - } - elsif (/^--verbose$|^-v$/) - { - $verbose = 1; # Oh is there a problem...? - } - elsif (/^(?:-p|--path=)(.+)$/) - { - my $p = $1; - $thisProg = $p . "/". basename($thisProg); - warn ("$thisProg doesn't exist\n") if (!(-f $thisProg)); - $thisProg .= " -p".$p; - $pathoption=1; - } - elsif (/^--help$|^-h$/) - { - print STDOUT "Usage $thisProg [OPTION] ... [dir/Makefile.in]...\n", - "\n", - "Patches dir/Makefile.in generated by automake\n", - "(where dir can be an absolute or relative directory name)\n", - "\n", - " -v, --verbose verbosely list files processed\n", - " -h, --help print this help, then exit\n", - " --version print version number, then exit\n", - " -p, --path= use the path to am_edit if the path\n", - " called from is not the one to be used\n", - " --no-final don't patch for --enable-final\n"; - - exit 0; - } - elsif (/^--no-final$/) - { - $use_final = 0; - $thisProg .= " --no-final"; - } - elsif (/^--foreign-libtool$/) - { - $foreign_libtool = 1; - $thisProg .= " --foreign-libtool"; - } - elsif (/^-n$/) - { - $dryrun = 1; - } - else - { - # user selects what input files to check - # add full path if relative path is given - $_ = cwd()."/".$_ if (! /^\//); - print "User wants $_\n" if ($verbose); - push (@makefiles, $_); - } -} - -if ($thisProg =~ /^\// && !$pathoption ) -{ - print STDERR "Illegal full pathname call performed...\n", - "The call to \"$thisProg\"\nwould be inserted in some Makefile.in.\n", - "Please use option --path.\n"; - exit 1; -} - -# Only scan for files when the user hasn't entered data -if (!@makefiles) -{ - print STDOUT "Scanning for Makefile.in\n" if ($verbose); - find (\&add_makefile, cwd()); - #chdir('$topdir'); -} else { - print STDOUT "Using input files specified by user\n" if ($verbose); -} - -foreach $makefile (sort(@makefiles)) -{ - processMakefile ($makefile); - last if ($errorflag); -} - -# Just some debug statistics - comment out for release as it uses printf. -printf STDOUT "Time %.2f CPU sec\n", (times)[0] - $start if ($verbose); - -exit $errorflag; # causes make to fail if erroflag is set - -#----------------------------------------------------------------------------- - -# In conjunction with the "find" call, this builds the list of input files -sub add_makefile () -{ - push (@makefiles, $File::Find::name) if (/Makefile.in$/); -} - -#----------------------------------------------------------------------------- - -# Processes a single make file -# The parameter contains the full path name of the Makefile.in to use -sub processMakefile ($) -{ - # some useful globals for the subroutines called here - local ($makefile) = @_; - local @headerdirs = ('.'); - local $haveAutomocTag = 0; - local $MakefileData = ""; - - local $cxxsuffix = "KKK"; - - local @programs = (); # lists the names of programs and libraries - local $program = ""; - - local @kdeinits = (); # lists the kdeinit targets - - local %realObjs = (); # lists the objects compiled into $program - local %sources = (); # lists the sources used for $program - local %finalObjs = (); # lists the objects compiled when final - local %realname = (); # the binary name of program variable - local %idlfiles = (); # lists the idl files used for $program - local %globalmocs = ();# list of all mocfiles (in %mocFiles format) - local %important = (); # list of files to be generated asap - local %uiFiles = (); - local %kcfgFiles = (); - - local $allidls = ""; - local $idl_output = "";# lists all idl generated files for cleantarget - local $ui_output = "";# lists all uic generated files for cleantarget - local $kcfg_output = "";# lists all kcfg generated files for cleantarget - - local %dependmocs = (); - - local $metasourceTags = 0; - local $dep_files = ""; - local $dep_finals = ""; - local %target_adds = (); # the targets to add - local %rule_adds = (); - local $kdelang = ""; - local @cleanfiles = (); - local $cleanMoc = ""; - local $closure_output = ""; - - local %varcontent = (); - - $makefileDir = dirname($makefile); - chdir ($makefileDir); - $printname = $makefile; - $printname =~ s/^\Q$topdir\E\///; - $makefile = basename($makefile); - - print STDOUT "Processing makefile $printname\n" if ($verbose); - - # Setup and see if we need to do this. - return if (!initialise()); - - tag_AUTOMAKE (); # Allows a "make" to redo the Makefile.in - tag_META_INCLUDES (); # Supplies directories for src locations - - foreach $program (@programs) { - $sources_changed{$program} = 0; - $dependmocs{$program} = ""; - $important{$program} = ""; - tag_IDLFILES(); # Sorts out idl rules - tag_NO_UNDEFINED(); - tag_CLOSURE(); - tag_NMCHECK(); - tag_UIFILES(); # Sorts out ui rules - tag_KCFGFILES(); # Sorts out kcfg rules - tag_METASOURCES (); # Sorts out the moc rules - if ($sources_changed{$program}) { - my $lookup = $program . '_SOURCES\s*=[ \t]*(.*)'; - - if($program =~ /libkdeinit_(.*)/) { - my $prog = $1; - substituteLine($prog . '_SOURCES\s*=[ \t]*(.*)', - "${prog}_SOURCES = ${prog}_dummy.$cxxsuffix\n" . - "libkdeinit_${prog}_SOURCES = " . $sources{$program}); - $sources{$prog} = "${prog}_dummy.$cxxsuffix"; - } - else { - substituteLine($lookup, "$program\_SOURCES=" . $sources{$program}); - } - } - if ($important{$program}) { - local %source_dict = (); - for $source (split(/[\034\s]+/, $sources{$program})) { - $source_dict{$source} = 1; - } - for $source (@cleanfiles) { - $source_dict{$source} = 0; - } - for $source (keys %source_dict) { - next if (!$source); - if ($source_dict{$source}) { - # sanity check - if (! -f $source) { - print STDERR "Error: $source is listed in a _SOURCE line in $printname, but doesn't exist yet. Put it in DISTCLEANFILES!\n"; - } else { - $target_adds{"\$(srcdir)/$source"} .= $important{$program}; - } - } - } - } - } - if ($cleanMoc) { - # Always add dist clean tag - # Add extra *.moc.cpp files created for USE_AUTOMOC because they - # aren't included in the normal *.moc clean rules. - appendLines ("$cleantarget-metasources:\n\t-rm -f $cleanMoc\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-metasources "; - } - - tag_DIST() unless ($kdeopts{"noautodist"}); - - if ($idl_output) { - appendLines ("$cleantarget-idl:\n\t-rm -f $idl_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-idl "; - } - - if ($ui_output) { - appendLines ("$cleantarget-ui:\n\t-rm -f $ui_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-ui "; - } - - if ($kcfg_output) { - appendLines ("$cleantarget-kcfg:\n\t-rm -f $kcfg_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-kcfg "; - } - - if ($closure_output) { - appendLines ("$cleantarget-closures:\n\t-rm -f $closure_output\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-closures "; - } - - if ($MakefileData =~ /\nKDE_LANG\s*=\s*(\S*)\s*\n/) { - $kdelang = '$(KDE_LANG)' - } else { - $kdelang = ''; - } - - tag_POFILES (); # language rules for po directory - tag_DOCFILES (); # language rules for doc directories - tag_LOCALINSTALL(); # add $(DESTDIR) before all kde_ dirs - tag_ICON(); - tag_SUBDIRS(); - - my $tmp = "force-reedit:\n"; - $tmp .= "\t$automkCall\n\tcd \$(top_srcdir) && perl $thisProg $printname\n\n"; - appendLines($tmp); - - make_bcheck_target(); - make_meta_classes(); - tag_COMPILE_FIRST(); - tag_FINAL() if (!$kdeopts{"nofinal"}); - - my $final_lines = "final:\n\t\$(MAKE) "; - my $final_install_lines = "final-install:\n\t\$(MAKE) "; - my $nofinal_lines = "no-final:\n\t\$(MAKE) "; - my $nofinal_install_lines = "no-final-install:\n\t\$(MAKE) "; - - foreach $program (@programs) { - my $lookup = $program . '_OBJECTS\s*=[ \t]*.*'; - my $new = ""; - my @list = split(/[\034\s]+/, $realObjs{$program}); - if (!$kdeopts{"nofinal"} && @list > 1 && $finalObjs{$program}) { - $new .= "$program\_final\_OBJECTS = " . $finalObjs{$program}; - $new .= "\n$program\_nofinal\_OBJECTS = " . $realObjs{$program}; - $new .= "\n\@KDE_USE_FINAL_FALSE\@$program\_OBJECTS = \$($program\_nofinal\_OBJECTS)"; - $new .= "\n\@KDE_USE_FINAL_TRUE\@$program\_OBJECTS = \$($program\_final\_OBJECTS)"; - - $final_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; - $final_install_lines .= "$program\_OBJECTS=\"\$($program\_final_OBJECTS)\" "; - $nofinal_lines .= "$program\_OBJECTS=\"\$($program\_nofinal\_OBJECTS)\" "; - $nofinal_install_lines .= "$program\_OBJECTS=\"\$($program\_nofinal_OBJECTS)\" "; - } else { - $new = "$program\_OBJECTS = " . $realObjs{$program}; - } - if($MakefileData =~ m/\n$lookup/) { - substituteLine ($lookup, $new); - } - else { - appendLines("$new\n"); - } - } - appendLines($final_lines . "all-am\n"); - appendLines($final_install_lines . "install-am\n"); - appendLines($nofinal_lines . "all-am\n"); - appendLines($nofinal_install_lines . "install-am\n"); - - my $lookup = '(\@\S+\@)?DEP_FILES\s*=[ \t]*(.*)'; - if ($MakefileData =~ /\n$lookup/) { - my $condition = $1; - my $depfiles = $2; - my $workfiles; - - if ($dep_finals) { - # Add the conditions on every line, since - # there may be line continuations in the list. - $workfiles = "$dep_files $dep_finals $depfiles"; - $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_TRUE\@\t/g; - $lines = "$condition\@KDE_USE_FINAL_TRUE\@DEP_FILES = $workfiles\n"; - $workfiles = "$dep_files $depfiles"; - $workfiles =~ s/\034/\034$condition\@KDE_USE_FINAL_FALSE\@\t/g; - $lines .= "$condition\@KDE_USE_FINAL_FALSE\@DEP_FILES = $workfiles"; - } else { - $workfiles = "$dep_files $depfiles"; - $workfiles =~ s/\034/\034$condition\t/g; - $lines = $condition . "DEP_FILES = $workfiles"; - } - substituteLine($lookup, $lines); - } - - # new recursive targets - $target_adds{ "nmcheck" } .= ""; # always create nmcheck target - $target_adds{ "nmcheck-am" } .= "nmcheck"; - $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; - if ($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "RECURSIVE_TARGETS = $1 nmcheck-recursive bcheck-recursive"); - } - - $cvs_lines = "kde-rpo-clean:\n"; - $cvs_lines .= "\t-rm -f *.rpo\n"; - appendLines($cvs_lines); - $target_adds{"clean"} .= "kde-rpo-clean "; - - my %target_dels = ("install-data-am" => ""); - - # some strange people like to do a install-exec, and expect that also - # all modules are installed. automake doesn't know this, so we need to move - # this here from install-data to install-exec. - if ($MakefileData =~ m/\nkde_module_LTLIBRARIES\s*=/) { -# $target_adds{"install-exec-am"} .= "install-kde_moduleLTLIBRARIES "; -# don't use $target_adds here because we need to append the dependency, not -# prepend it. Fixes #44342 , when a module depends on a lib in the same dir -# and libtool needs it during relinking upon install (Simon) - my $lookup = "install-exec-am:([^\n]*)"; - if($MakefileData =~ /\n$lookup\n/) { - substituteLine("$lookup", "install-exec-am: $1 install-kde_moduleLTLIBRARIES"); - } - $target_dels{"install-data-am"} .= "install-kde_moduleLTLIBRARIES "; - $target_adds{"install-data-am"} .= " "; - } - - my $lines = ""; - - foreach $add (keys %target_adds) { - my $lookup = quotemeta($add) . ':([^\n]*)'; - if ($MakefileData =~ /\n$lookup\n/) { - my $newlines = $1; - my $oldlines = $lookup; - if (defined $target_dels{$add}) { - foreach $del (split(' ', $target_dels{$add})) { - $newlines =~ s/\s*$del\s*/ /g; - } - } - substituteLine($oldlines, "$add: " . $target_adds{$add} . $newlines); - } else { - $lines .= "$add: " . $target_adds{$add} . "\n"; - } - } - - appendLines($lines) if ($lines); - - $lines = join("\n", values %rule_adds); - appendLines($lines) if ($lines); - - my $found = 1; - - while ($found) { - if ($MakefileData =~ m/\n(.*)\$\(CXXFLAGS\)(.*)\n/) { - my $stuff_before = $1; - my $stuff_after = $2; - my $lookup = quotemeta("$1\$(CXXFLAGS)$2"); - my $replacement = "$1\$(KCXXFLAGS)$2"; - $MakefileData =~ s/$lookup/$replacement/; - $lookup =~ s/\\\$\\\(CXXFLAGS\\\)/\\\$\\\(KCXXFLAGS\\\)/; - $replacement = "$stuff_before\$(KCXXFLAGS) \$(KDE_CXXFLAGS)$stuff_after"; - next if ($stuff_before =~ /\$\(KDE_CXXFLAGS\)/ or $stuff_after =~ /\$\(KDE_CXXFLAGS\)/); - substituteLine($lookup, $replacement); - } else { - $found = 0; - } - } - - if($foreign_libtool == 0) { - $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=link) (\$\(CXXLD\).*\$\(KCXXFLAGS\))'; - - if ($MakefileData =~ m/$lookup/ ) { - $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; - } - - $lookup = '(\n[^#].*\$\(LIBTOOL\) --mode=compile)\s+(\$\(CXX\)\s+)'; - if ($MakefileData =~ m/$lookup/ ) { - $MakefileData =~ s/$lookup/$1 --tag=CXX $2/; - } - } - - $MakefileData =~ s/\$\(KCXXFLAGS\)/\$\(CXXFLAGS\)/g; - - $lookup = '(.*)cp -pr \$\$/\$\$file \$\(distdir\)/\$\$file(.*)'; - if ($MakefileData =~ m/\n$lookup\n/) { - substituteLine($lookup, "$1cp -pr \$\$d/\$\$file \$(distdir)/\$\$file$2"); - } - - # Always update the Makefile.in - updateMakefile (); - return; -} - -#----------------------------------------------------------------------------- - -# Beware: This procedure is not complete. E.g. it also parses lines -# containing a '=' in rules (for instance setting shell vars). For our -# usage this us enough, though. -sub read_variables () -{ - while ($MakefileData =~ /\n\s*(\S+)\s*=([^\n]*)/g) { - $varcontent{$1} = $2; - } -} - -# Check to see whether we should process this make file. -# This is where we look for tags that we need to process. -# A small amount of initialising on the tags is also done here. -# And of course we open and/or create the needed make files. -sub initialise () -{ - if (! -r "Makefile.am") { - print STDOUT "found Makefile.in without Makefile.am\n" if ($verbose); - return 0; - } - - # Checking for files to process... - - open (FILEIN, $makefile) || die "Can't open $makefileDir/$makefile: $!\n"; - # perl bug in 5.8.0: in utf8 mode it badly screws up - binmode(FILEIN, ":bytes") if ($] >= 5.008); - # Read the file - # stat(FILEIN)[7] might look more elegant, but is slower as it - # requires stat'ing the file - seek(FILEIN, 0, 2); - my $fsize = tell(FILEIN); - seek(FILEIN, 0, 0); - read FILEIN, $MakefileData, $fsize; - close FILEIN; - print "DOS CRLF within $makefileDir/$makefile!\n" if($MakefileData =~ y/\r//d); - - # Remove the line continuations, but keep them marked - # Note: we lose the trailing spaces but that's ok. - # Don't mangle line-leading spaces (usually tabs) - # since they're important. - $MakefileData =~ s/\\\s*\n/\034/g; - - # If we've processed the file before... - restoreMakefile () if ($MakefileData =~ /$progId/); - - foreach $dir (@foreignfiles) { - if (substr($makefileDir,0,length($dir)) eq $dir) { - return 0; - } - } - - %kdeopts = (); - $kdeopts{"foreign"} = 0; - $kdeopts{"qtonly"} = 0; - $kdeopts{"noautodist"} = 0; - $kdeopts{"foreign-libtool"} = $foreign_libtool; - $kdeopts{"nofinal"} = !$use_final; # default - - read_variables(); - - if ($MakefileData =~ /\nKDE_OPTIONS\s*=[ \t]*([^\n]*)\n/) { - my $kde_options_str = $1; - local @kde_options = split(/[\034\s]+/, $kde_options_str); - if (grep(/^foreign$/, @kde_options)) { - push(@foreignfiles, $makefileDir . "/"); - return 0; # don't touch me - } - for $opt (@kde_options) { - if (!defined $kdeopts{$opt}) { - print STDERR "Warning: unknown option $opt in $printname\n"; - } else { - $kdeopts{$opt} = 1; - } - } - } - - # Look for the tags that mean we should process this file. - $metasourceTags = 0; - $metasourceTags++ while ($MakefileData =~ /\n[^=\#]*METASOURCES\s*=/g); - - my $pofileTag = 0; - $pofileTag++ while ($MakefileData =~ /\nPOFILES\s*=/g); - if ($pofileTag > 1) - { - print STDERR "Error: Only one POFILES tag allowed\n"; - $errorflag = 1; - } - - while ($MakefileData =~ /\n\.SUFFIXES:([^\n]+)\n/g) { - my $suffixes_str = $1; - my @list=split(' ', $suffixes_str); - foreach $ext (@list) { - if ($ext =~ /^\.$cppExt$/) { - $cxxsuffix = $ext; - $cxxsuffix =~ s/\.//g; - print STDOUT "will use suffix $cxxsuffix\n" if ($verbose); - last; - } - } - } - - tag_KDEINIT(); - - while ($MakefileData =~ /\n(\S*)_OBJECTS\s*=[\034 \t]*([^\n]*)\n/g) { - - my $program = $1; - my $objs = $2; # safe them - - my $ocv = 0; - - my @objlist = split(/[\034\s]+/, $objs); - foreach $obj (@objlist) { - if ($obj =~ /(\S*)\$\((\S+)\)/ ) { - my $pre = $1; - my $variable = $2; - if ($pre eq '' && exists($varcontent{$variable})) { - my @addlist = split(/[\034\s]+/, $varcontent{$variable}); - push(@objlist, @addlist); - } elsif ($variable !~ 'OBJEXT' && $variable !~ /am__objects_\d+/ ) { - $ocv = 1; - } - } - } - - next if ($ocv); - next if ($program =~ /^am_libkdeinit_/); - - $program =~ s/^am_// if ($program =~ /^am_/); - - my $sourceprogram = $program; - $sourceprogram =~ s/\@am_/\@/ if($sourceprogram =~ /^.*\@am_.+/); - - print STDOUT "found program $program\n" if ($verbose); - push(@programs, $program); - - $realObjs{$program} = $objs; - - if ($MakefileData =~ /\n$sourceprogram\_SOURCES\s*=[ \t]*(.*)\n/) { - $sources{$program} = $1; - } - else { - $sources{$program} = ""; - print STDERR "found program with no _SOURCES: $program\n"; - } - - my $realprogram = $program; - $realprogram =~ s/_/./g; # unmask to regexp - if ($MakefileData =~ /\n($realprogram)(\$\(EXEEXT\)?)?:.*\$\($program\_OBJECTS\)/) { - $realname{$program} = $1; - } else { - # not standard Makefile - nothing to worry about - $realname{$program} = ""; - } - } - - my $lookup = 'DEPDIR\s*=.*'; - if ($MakefileData !~ /\n$lookup/) { - $lookup = 'bindir\s*=[ \t]*.*'; - substituteLine($lookup, "DEPDIR = .deps\n$1") if ($MakefileData =~ /\n($lookup)/); - } - - my @marks = ('MAINTAINERCLEANFILES', 'CLEANFILES', 'DISTCLEANFILES'); - foreach $mark (@marks) { - while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { - my $clean_str = $2; - foreach $file (split('[\034\s]+', $clean_str)) { - $file =~ s/\.\///; - push(@cleanfiles, $file); - } - } - } - - my $localTag = 0; - $localTag++ if ($MakefileData =~ /\ninstall-\S+-local:/); - - return (!$errorflag); -} - -#----------------------------------------------------------------------------- - -# Gets the list of user defined directories - relative to $srcdir - where -# header files could be located. -sub tag_META_INCLUDES () -{ - my $lookup = '[^=\n]*META_INCLUDES\s*=[ \t]*(.*)'; - return 1 if ($MakefileData !~ /($lookup)\n/); - print STDOUT "META_INCLUDE processing <$1>\n" if ($verbose); - - my $headerStr = $2; - removeLine ($lookup, $1); - - my @headerlist = split(/[\034\s]+/, $headerStr); - - foreach $dir (@headerlist) - { - $dir =~ s#\$\(srcdir\)#.#; - if (! -d $dir) - { - print STDERR "Warning: $dir can't be found. ", - "Must be a relative path to \$(srcdir)\n"; - } - else - { - push (@headerdirs, $dir); - } - } - - return 0; -} - -#----------------------------------------------------------------------------- - -sub tag_FINAL() -{ - my @final_names = (); - - foreach $program (@programs) { - - if ($sources{$program} =~ /\(/) { - print STDOUT "found ( in $program\_SOURCES. skipping\n" if ($verbose); - next; - } - - my $mocs = ""; # Moc files (in this program) - my $moc_cpp_added = 0; # If we added some .moc.cpp files, due to - # no other .cpp file including the .moc one. - - my @progsources = split(/[\034\s]+/, $sources{$program}); - my %shash = (); - @shash{@progsources} = 1; # we are only interested in the existence - my %sourcelist = (); - my %extradeps = (); - - foreach $source (@progsources) { - my $suffix = $source; - $suffix =~ s/^.*\.([^\.]+)$/$1/; - - $sourcelist{$suffix} .= "$source "; - } - foreach my $mocFile (keys (%globalmocs)) - { - my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); - if (defined ($cppFile)) { - $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; - } else { - $sourcelist{$cxxsuffix} .= "$mocFile.moc.$cxxsuffix "; - $moc_cpp_added = 1; - } - } - - # scan for extra given dependencies and add them to our target - while ($MakefileData =~ /\n\s*(\S+)\.(?:lo|o)\s*:([^\n]*)/g) { - $extradeps{$1} = $2; - } - - foreach $suffix (keys %sourcelist) { - # See if this file contains c++ code. (i.e., just check the file's suffix against c++ extensions) - my $suffix_is_cxx = 0; - if($suffix =~ /($cppExt)$/) { - $cxxsuffix = $1; - $suffix_is_cxx = 1; - } - - my $mocfiles_in = ($suffix eq $cxxsuffix) && $moc_cpp_added; - - my @sourcelist = split(/[\034\s]+/, $sourcelist{$suffix}); - - if ((@sourcelist == 1 && !$mocfiles_in) || $suffix_is_cxx != 1 ) { - - # we support IDL on our own - if ($suffix eq "skel" || $suffix =~ /^stub/ - || $suffix =~ /^signals/ # obsolete, remove in KDE-4 - || $suffix eq "h" || $suffix eq "ui" - || $suffix eq "kcfgc" ) { - next; - } - - foreach $file (@sourcelist) { - $file =~ s/\Q$suffix\E$//; - - $finalObjs{$program} .= $file; - if ($program =~ /_la$/) { - $finalObjs{$program} .= "lo "; - } else { - $finalObjs{$program} .= "o "; - } - } - next; # suffix - } - - my $source_deps = ""; - foreach $source (@sourcelist) { - if (-f $source) { - $source_deps .= " \$(srcdir)/$source"; - } else { - $source_deps .= " $source"; - } - my $plainsource = $source; - $plainsource =~ s/\.$cppExt$//; - $source_deps .= " " . $extradeps{$plainsource} if (exists($extradeps{$plainsource})); - } - - $handling = "$program.all_$suffix.$suffix: \$(srcdir)/Makefile.in" . $source_deps . " " . join(' ', $mocs) . "\n"; - $handling .= "\t\@echo 'creating $program.all_$suffix.$suffix ...'; \\\n"; - $handling .= "\trm -f $program.all_$suffix.files $program.all_$suffix.final; \\\n"; - $handling .= "\techo \"#define KDE_USE_FINAL 1\" >> $program.all_$suffix.final; \\\n"; - $handling .= "\tfor file in " . $sourcelist{$suffix} . "; do \\\n"; - $handling .= "\t echo \"#include \\\"\$\$file\\\"\" >> $program.all_$suffix.files; \\\n"; - $handling .= "\t test ! -f \$\(srcdir\)/\$\$file || egrep '^#pragma +implementation' \$\(srcdir\)/\$\$file >> $program.all_$suffix.final; \\\n"; - $handling .= "\tdone; \\\n"; - $handling .= "\tcat $program.all_$suffix.final $program.all_$suffix.files > $program.all_$suffix.$suffix; \\\n"; - $handling .= "\trm -f $program.all_$suffix.final $program.all_$suffix.files\n"; - - appendLines($handling); - - push(@final_names, "$program.all_$suffix.$suffix"); - my $finalObj = "$program.all_$suffix."; - if ($program =~ /_la$/) { - $finalObj .= "lo"; - } else { - $finalObj .= "o"; - } - $finalObjs{$program} .= $finalObj . " "; - } - } - - if (!$kdeopts{"nofinal"} && @final_names >= 1) { - # add clean-final target - my $lines = "$cleantarget-final:\n"; - $lines .= "\t-rm -f " . join(' ', @final_names) . "\n" if (@final_names); - appendLines($lines); - $target_adds{"$cleantarget-am"} .= "$cleantarget-final "; - - foreach $finalfile (@final_names) { - $finalfile =~ s/\.[^.]*$/.P/; - $dep_finals .= " \$(DEPDIR)/$finalfile"; - } - } -} - -sub tag_KDEINIT() -{ - my @progs = (); - my $ltlibs = ""; - my $lookup = 'kdeinit_LTLIBRARIES\s*=[ \t]*(.*)'; - - if ($MakefileData =~ m/\n$lookup/) { - @kdeinits = split(/[\034\s]+/, $1); - my $lines = ""; - foreach my $kdeinit (@kdeinits) { - if ($kdeinit =~ m/\.la$/) { - $kdeinit =~ s/\.la$//; - push(@progs, $kdeinit); - - $lines .= "\n${kdeinit}.la.$cxxsuffix:\n"; - $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' > ${kdeinit}.la.$cxxsuffix; \\\n"; - $lines .= "\techo 'int main(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}.la.$cxxsuffix\n"; - - $lines .= "\n${kdeinit}_dummy.$cxxsuffix:\n"; - $lines .= "\techo '#include ' > ${kdeinit}_dummy.$cxxsuffix; \\\n"; - $lines .= "\techo 'extern \"C\" int kdemain(int argc, char* argv[]);' >> ${kdeinit}_dummy.$cxxsuffix; \\\n"; - $lines .= "\techo 'extern \"C\" KDE_EXPORT int kdeinitmain(int argc, char* argv[]) { return kdemain(argc,argv); }' >> ${kdeinit}_dummy.$cxxsuffix\n"; - - push(@cleanfiles, "${kdeinit}.la.$cxxsuffix"); - push(@cleanfiles, "${kdeinit}_dummy.$cxxsuffix"); - - # add dependency - $dep_files .= " \$(DEPDIR)/${kdeinit}.la.Po" if($dep_files !~/${kdeinit}.la.Po/ ); - $dep_files .= " \$(DEPDIR)/${kdeinit}_dummy.Plo" if($dep_files !~/${kdeinit}_dummy.Plo/ ); - - # make library - $lookup = $kdeinit . '_la_LIBADD\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - my $libadd = $1; - substituteLine($lookup, "${kdeinit}_la_LIBADD = libkdeinit_${kdeinit}.la"); - appendLines("libkdeinit_${kdeinit}_la_LIBADD = $libadd\n"); - } - appendLines("libkdeinit_${kdeinit}_la_LDFLAGS = -no-undefined -avoid-version \$(all_libraries)\n"); - - # add library dependencies - $lookup = $kdeinit . '_la_DEPENDENCIES\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - my $libdeps = $1; - substituteLine($lookup, "${kdeinit}_la_DEPENDENCIES = libkdeinit_${kdeinit}.la"); - appendLines("libkdeinit_${kdeinit}_la_DEPENDENCIES = $libdeps\n"); - } - - # make library objects - $lookup = "am_${kdeinit}_la_OBJECTS" . '\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - my $libobjects = $1; - substituteLine($lookup, "am_${kdeinit}_la_OBJECTS = ${kdeinit}_dummy.lo"); - appendLines("am_libkdeinit_${kdeinit}_la_OBJECTS = $libobjects\n"); - my $prog = "libkdeinit_${kdeinit}_la"; - push(@programs, $prog); - $realObjs{$prog} = $libobjects; - $realname{$prog} = "libkdeinit_${kdeinit}.la"; - } - $target_adds{"libkdeinit_${kdeinit}.la"} = "\$(libkdeinit_${kdeinit}_la_OBJECTS) \$(libkdeinit_${kdeinit}_la_DEPENDENCIES)\n" . - "\t\$(CXXLINK) -rpath \$(libdir) \$(libkdeinit_${kdeinit}_la_LDFLAGS) ". - "\$(libkdeinit_${kdeinit}_la_OBJECTS) " . - "\$(libkdeinit_${kdeinit}_la_LIBADD) " . - "\$(LIBS)\n"; - - # make libkdeinit sources - $lookup = $kdeinit . '_la_SOURCES\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - my $srces = $1; - $sources_changed{"libkdeinit_${kdeinit}_la"} = 1; - $sources{"libkdeinit_${kdeinit}_la"} = $srces; - } - - # make libkdeinit metasources - $lookup = $kdeinit . '_la_METASOURCES\s*=[ \t]*(.*)'; - substituteLine($lookup, "libkdeinit_${kdeinit}_la_METASOURCES = $1") - if($MakefileData =~ m/\n$lookup/); - -=cut - # make binary sources - $lookup = $kdeinit. '_SOURCES\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - substituteLine($lookup, "${kdeinit}_SOURCES = ${kdeinit}.la.$cxxsuffix"); - $lookup = 'SOURCES\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - my $srces = $1; - $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; - $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; - substituteLine($lookup, "SOURCES = $srces"); - } - $lookup = 'DIST_SOURCES\s*=[ \t](.*)'; - if($MakefileData =~ m/\n$lookup/) { - my $srces = $1; - $srces =~ s/\b$kdeinit\.c\b/\$(${kdeinit}_SOURCES)/; - $srces =~ s/\$\(${kdeinit}_la_SOURCES\)/\$(libkdeinit_${kdeinit}_la_SOURCES)/; - substituteLine($lookup, "DIST_SOURCES = $srces"); - } - } - - # make binary objects / libs - $lookup = $kdeinit . '_OBJECTS\s*=[ \t]*.*'; - if($MakefileData =~ m/\n$lookup/) { - $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; - substituteLine("${kdeinit}_LDFLAGS\\s*=.*", "${kdeinit}_LDFLAGS = \$(all_libraries)"); - substituteLine("${kdeinit}_LDADD\\s*=.*", "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la"); - substituteLine("${kdeinit}_DEPENDENCIES\\s*=.*", "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la"); - } -=cut - # add binary - push(@programs, $kdeinit); - $realObjs{$kdeinit} = "${kdeinit}.la.\$(OBJEXT)"; - $realname{$kdeinit} = $kdeinit; - $sources{$kdeinit} = "${kdeinit}.la.$cxxsuffix"; - - $lines .= "${kdeinit}_LDFLAGS = \$(KDE_RPATH) -no-undefined \$(all_libraries)\n"; - $lines .= "${kdeinit}_LDADD = libkdeinit_${kdeinit}.la\n"; - $lines .= "${kdeinit}_DEPENDENCIES = libkdeinit_${kdeinit}.la\n"; - - $target_adds{"${kdeinit}\$(EXEEXT)"} = - "\$(${kdeinit}_OBJECTS) \$(${kdeinit}_DEPENDENCIES)\n" . - "\t\@rm -f ${kdeinit}\$(EXEEXT)\n" . - "\t\$(CXXLINK) \$(${kdeinit}_LDFLAGS) \$(${kdeinit}_OBJECTS) \$(${kdeinit}_LDADD) \$(LIBS)\n"; - - $ltlibs .= " libkdeinit_${kdeinit}.la"; - } - } - appendLines($lines); - - # add libkdeinit target - $lookup = 'lib_LTLIBRARIES\s*=[ \t]*(.*)'; - if($MakefileData =~ m/\n$lookup/) { - substituteLine($lookup, "lib_LTLIBRARIES = $1 $ltlibs"); - } - else { - print STDERR - "Error: lib_LTLIBRARIES missing in $printname (required for kdeinit_LTLIBRARIES).\n"; - $errorflag = 1; - } - } - - if($#progs >= 0) { - if($MakefileData !~ m/\nbin_PROGRAMS\s*=/) { - print STDERR "Error: bin_PROGRAMS missing in $printname (required for kdeinit_LTLIBRARIES).\n"; - $errorflag = 1; - } - else { - # add our new progs to SOURCES, DIST_SOURCES and bin_PROGRAMS - my $progsources = ""; - my $progexes = ""; - foreach my $p (@progs) { - $progsources .= "\$(${p}_SOURCES) "; - $progexes .= "${p}\$(EXEEXT) "; - } - $lookup = 'SOURCES\s*=[ \t]*(.*)'; - if($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "SOURCES = $1 $progsources"); - } - $lookup = 'DIST_SOURCES\s*=[ \t]*(.*)'; - if($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "DIST_SOURCES = $1 $progsources"); - } - # bin_PROGRAMS is complicated, as it exists twice, so we do a little - # magic trick here - $lookup = 'PROGRAMS\s*=[ \t]*(.*)'; - if ($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "bin_PROGRAMS += $progexes\nPROGRAMS = $1"); - } - } - } -} - -#----------------------------------------------------------------------------- - -sub tag_COMPILE_FIRST() -{ - foreach $program (@programs) { - my $lookup = "$program" . '_COMPILE_FIRST\s*=[ \t]*(.*)'; - if ($MakefileData =~ m/\n$lookup\n/) { - my $compilefirst_str = $1; - my @compilefirst = split(/[\034\s]+/, $compilefirst_str); - my @progsources = split(/[\034\s]+/, $sources{$program}); - my %donesources = (); - foreach $source (@progsources) { - my @deps = (); - my $sdeps = ""; - if (-f $source) { - $sdeps = "\$(srcdir)/$source"; - } else { - $sdeps = "$source"; - } - foreach $depend (@compilefirst) { - next if ($source eq $depend); - # avoid cyclic dependencies - next if defined($donesources{$depend}); - push @deps, $depend; - } - $target_adds{$sdeps} .= join(' ', @deps) . ' ' if (@deps); - $donesources{$source} = 1; - } - } - } -} - -#----------------------------------------------------------------------------- - - -# Organises the list of headers that we'll use to produce moc files -# from. -sub tag_METASOURCES () -{ - local @newObs = (); # here we add to create object files - local @depend = (); # here we add to create moc files - local $mocExt = ".moc"; - local %mocFiles = (); - - my $line = ""; - my $postEqual = ""; - - my $lookup; - my $found = ""; - if ($metasourceTags > 1) { - $lookup = $program . '_METASOURCES\s*=\s*(.*)'; - return 1 if ($MakefileData !~ /\n($lookup)\n/); - $found = $1; - } else { - $lookup = $program . '_METASOURCES\s*=\s*(.*)'; - if ($MakefileData !~ /\n($lookup)\n/) { - $lookup = 'METASOURCES\s*=\s*(.*)'; - return 1 if ($MakefileData !~ /\n($lookup)\n/); - $found = $1; - $metasourceTags = 0; # we can use the general target only once - } else { - $found = $1; - } - } - print STDOUT "METASOURCE processing <$found>)\n" if ($verbose); - - $postEqual = $found; - $postEqual =~ s/[^=]*=//; - - removeLine ($lookup, $found); - - # Always find the header files that could be used to "moc" - return 1 if (findMocCandidates ()); - - if ($postEqual =~ /AUTO\s*(\S*)|USE_AUTOMOC\s*(\S*)/) - { - print STDERR "$printname: the argument for AUTO|USE_AUTOMOC is obsolete" if ($+); - $mocExt = ".moc.$cxxsuffix"; - $haveAutomocTag = 1; - } - else - { - # Not automoc so read the list of files supplied which - # should be .moc files. - - $postEqual =~ tr/\034/ /; - - # prune out extra headers - This also checks to make sure that - # the list is valid. - pruneMocCandidates ($postEqual); - } - - checkMocCandidates (); - - if (@newObs) { - my $ext = ($program =~ /_la$/) ? ".moc.lo " : ".moc.o "; - $realObjs{$program} .= "\034" . join ($ext, @newObs) . $ext; - $dependmocs{$program} = join (".moc.$cxxsuffix " , @newObs) . ".moc.$cxxsuffix"; - foreach $file (@newObs) { - $dep_files .= " \$(DEPDIR)/$file.moc.P" if($dep_files !~/$file.moc.P/); - } - } - if (@depend) { - $dependmocs{$program} .= " "; - $dependmocs{$program} .= join('.moc ', @depend) . ".moc"; - $dependmocs{$program} .= " "; - } - addMocRules (); - @globalmocs{keys %mocFiles}=values %mocFiles; -} - -#----------------------------------------------------------------------------- - -# Returns 0 if the line was processed - 1 otherwise. -# Errors are logged in the global $errorflags -sub tag_AUTOMAKE () -{ - my $lookup = '.*cd \$\(top_srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\)(.*)'; - return 1 if ($MakefileData !~ /\n($lookup)\n/); - print STDOUT "AUTOMAKE processing <$1>\n" if ($verbose); - - my $newLine = $1."\n\tcd \$(top_srcdir) && perl $thisProg $printname"; - - # automake 1.8.x adds another automake call. *sigh* - $newLine =~ s/;([\034\s]+cd\s+\$\(srcdir\)\s+&&[\034\s]+\$\(AUTOMAKE\).*)[\034\s]+\&\&[\034\s]+exit[\034\s]+0;([\034\s]+exit\s+1)/; \034 ( $1 ) || exit 1; echo \' cd \$(top_srcdir) && perl $thisProg \'; cd \$(top_srcdir) && perl $thisProg && exit 0; $2/; - substituteLine ($lookup, $newLine); - $automkCall = $1; - - $lookup = '.*cd \$\(srcdir\)\s+&&[\034\s]+\$\(AUTOCONF\)(.*)'; - if ($MakefileData =~ /\n($lookup)\n/) { - $newLine = "\tcd \$(srcdir) && rm -f configure\n"; - $newLine .= "\tcd \$(top_srcdir) && \$(MAKE) -f admin/Makefile.common configure"; - substituteLine ($lookup, $newLine); - } - - return 0; -} - -#----------------------------------------------------------------------------- - -sub handle_TOPLEVEL() -{ - my $pofiles = ""; - my @restfiles = (); - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if (-d $entry); - - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry =~ /.gmo$/); - - if ($entry =~ /\.po$/) { - next; - } - push(@restfiles, $entry); - } - closedir (THISDIR); - - if (@restfiles) { - $target_adds{"install-data-am"} .= "install-nls-files "; - $lines = "install-nls-files:\n"; - $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$kdelang\n"; - for $file (@restfiles) { - $lines .= "\t\$(INSTALL_DATA) \$\(srcdir\)/$file \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; - } - $target_adds{"uninstall"} .= "uninstall-nls-files "; - $lines .= "uninstall-nls-files:\n"; - for $file (@restfiles) { - $lines .= "\t-rm -f \$(DESTDIR)\$(kde_locale)/$kdelang/$file\n"; - } - appendLines($lines); - } - - return 0; -} - -#----------------------------------------------------------------------------- - -sub tag_SUBDIRS () -{ - if ($MakefileData !~ /\nSUBDIRS\s*=\s*\$\(AUTODIRS\)\s*\n/) { - return 1; - } - - my $subdirs = "."; - - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./); - if (-d $entry && -f $entry . "/Makefile.am") { - $subdirs .= " $entry"; - next; - } - } - closedir (THISDIR); - - substituteLine('SUBDIRS\s*=.*', "SUBDIRS =$subdirs"); - return 0; -} - -sub tag_IDLFILES () -{ - my @psources = split(/[\034\s]+/, $sources{$program}); - my $dep_lines = ""; - my @cppFiles = (); - - foreach $source (@psources) { - my $skel = ($source =~ m/\.skel$/); - my $stub = ($source =~ m/\.stub$/); - my $signals = ($source =~ m/\.signals$/); # obsolete, remove in KDE-4 - - if ($stub || $skel || $signals) { - - my $qs = quotemeta($source); - $sources{$program} =~ s/$qs//; - $sources_changed{$program} = 1; - - $source =~ s/\.(stub|skel|signals)$//; - my $sourcename; - - if ($skel) { - $sourcename = "$source\_skel"; - } elsif ($stub) { - $sourcename = "$source\_stub"; - } else { - $sourcename = "$source\_signals"; - } - - my $sourcedir = ''; - if (-f "$makefileDir/$source.h") { - $sourcedir = '$(srcdir)/'; - } else { - if ($MakefileData =~ /\n$source\_DIR\s*=\s*(\S+)\n/) { - $sourcedir = $1; - $sourcedir .= "/" if ($sourcedir !~ /\/$/); - } - } - - if ($allidls !~ /$source\_kidl/) { - - $use_ng = ($MakefileData =~ /\n$source\_DCOPIDLNG\s*=\s*(\S+)\n/); - $dcopidl = $use_ng ? "KDECONFIG=\"\$(KDECONFIG)\" \$(DCOPIDLNG)" : "\$(DCOPIDL)"; - - $dep_lines .= "$source.kidl: $sourcedir$source.h \$(DCOP_DEPENDENCIES)\n"; - $dep_lines .= "\t$dcopidl $sourcedir$source.h > $source.kidl || ( rm -f $source.kidl ; false )\n"; - - $allidls .= $source . "_kidl "; - } - - if ($allidls !~ /$sourcename/) { - - $dep_lines_tmp = ""; - - if ($skel) { - $dep_lines .= "$sourcename.$cxxsuffix: $source.kidl\n"; - $dep_lines .= "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-stub $source.kidl\n"; - } elsif ($stub) { - $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-signals --no-skel $source.kidl\n"; - } else { # signals - obsolete, remove in KDE 4 - $dep_lines_tmp = "\t\$(DCOPIDL2CPP) --c++-suffix $cxxsuffix --no-stub --no-skel $source.kidl\n"; - } - - if ($stub || $signals) { - $target_adds{"$sourcename.$cxxsuffix"} .= "$sourcename.h "; - $dep_lines .= "$sourcename.h: $source.kidl\n"; - $dep_lines .= $dep_lines_tmp; - } - - $allidls .= $sourcename . " "; - } - - $idlfiles{$program} .= $sourcename . " "; - - if ($program =~ /_la$/) { - $realObjs{$program} .= " $sourcename.lo"; - } else { - $realObjs{$program} .= " $sourcename.\$(OBJEXT)"; - } - $sources{$program} .= " $sourcename.$cxxsuffix"; - $sources_changed{$program} = 1; - $important{$program} .= "$sourcename.h " if (!$skel); - $idl_output .= "\\\n\t$sourcename.$cxxsuffix $sourcename.h $source.kidl "; - push(@cleanfiles, "$sourcename.$cxxsuffix"); - push(@cleanfiles, "$sourcename.h"); - push(@cleanfiles, "$sourcename.kidl"); - $dep_files .= " \$(DEPDIR)/$sourcename.P" if ($dep_files !~/$sourcename.P/); - } - } - if ($dep_lines) { - appendLines($dep_lines); - } - - if (0) { - my $lookup = "($program)"; - $lookup .= '(|\$\(EXEEXT\))'; - $lookup =~ s/\_/./g; - $lookup .= ":(.*..$program\_OBJECTS..*)"; - # $lookup = quotemeta($lookup); - if ($MakefileData =~ /\n$lookup\n/) { - - my $line = "$1$2: "; - foreach $file (split(' ', $idlfiles{$program})) { - $line .= "$file.$cxxsuffix "; - } - $line .= $3; - substituteLine($lookup, $line); - } else { - print STDERR "no built dependency found $lookup\n"; - } - } -} - -sub tag_UIFILES () -{ - my @psources = split(/[\034\s]+/, $sources{$program}); - my @depFiles = (); - - foreach $source (@psources) { - - if ($source =~ m/\.ui$/) { - - print STDERR "adding UI file $source\n" if ($verbose); - - my $qs = quotemeta($source); - $sources{$program} =~ s/$qs//; - $sources_changed{$program} = 1; - - $source =~ s/\.ui$//; - - my $sourcedir = ''; - if (-f "$makefileDir/$source.ui") { - $sourcedir = '$(srcdir)/'; - } - - if (!$uiFiles{$source}) { - - my $dep_lines = "$source.$cxxsuffix: $sourcedir$source.ui $source.h $source.moc\n"; - $dep_lines .= "\trm -f $source.$cxxsuffix\n"; - if (!$kdeopts{"qtonly"}) { - $dep_lines .= "\techo '#include ' > $source.$cxxsuffix\n"; - $dep_lines .= "\techo '#include ' >> $source.$cxxsuffix\n"; - my ($mangled_source) = $source; - $mangled_source =~ s/[^A-Za-z0-9]/_/g; # get rid of garbage - $dep_lines .= "\t\$(UIC) -tr \${UIC_TR} -i $source.h $sourcedir$source.ui > $source.$cxxsuffix.temp ; ret=\$\$?; \\\n"; - $dep_lines .= "\t\$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\" ),QString::null,g\" $source.$cxxsuffix.temp | \$(PERL) -pe \"s,\${UIC_TR}( \\\"\\\"\\, \\\"\\\" ),QString::null,g\" | \$(PERL) -pe \"s,image([0-9][0-9]*)_data,img\\\$\$1_" . $mangled_source . ",g\" | \$(PERL) -pe \"s,: QWizard\\(,: KWizard(,g\" >> $source.$cxxsuffix ;\\\n"; - $dep_lines .= "\trm -f $source.$cxxsuffix.temp ;\\\n"; - } else { - $dep_lines .= "\t\$(UIC) -i $source.h $sourcedir$source.ui > $source.$cxxsuffix; ret=\$\$?; \\\n"; - } - $dep_lines .= "\tif test \"\$\$ret\" = 0; then echo '#include \"$source.moc\"' >> $source.$cxxsuffix; else rm -f $source.$cxxsuffix ; exit \$\$ret ; fi\n\n"; - $dep_lines .= "$source.h: $sourcedir$source.ui\n"; - $dep_lines .= "\trm -rf $source.h;\n"; - if (!$kdeopts{"qtonly"}) { - $dep_lines .= "\t\$(UIC) $sourcedir$source.ui | \$(PERL) -pi -e \"s,public QWizard,public KWizard,g; s,#include ,#include ,g\" >> $source.h ;\n"; - } else { - $dep_lines .= "\t\$(UIC) -o $source.h $sourcedir$source.ui\n"; - } - $dep_lines .= "$source.moc: $source.h\n"; - $dep_lines .= "\t\$(MOC) $source.h -o $source.moc\n"; - - $rule_adds{"$source.$cxxsuffix"} = $dep_lines; - - $uiFiles{$source} = 1; - $dependmocs{$program} .= " $source.moc"; - $globalmocs{$source} = "\035$source.h\035$source.cpp"; - } - - if ($program =~ /_la$/) { - $realObjs{$program} .= " $source.lo"; - } else { - $realObjs{$program} .= " $source.\$(OBJEXT)"; - } - $sources{$program} .= " $source.$cxxsuffix"; - $sources_changed{$program} = 1; - $important{$program} .= "$source.h "; - $ui_output .= "\\\n\t$source.$cxxsuffix $source.h $source.moc "; - push(@cleanfiles, "$source.$cxxsuffix"); - push(@cleanfiles, "$source.h"); - push(@cleanfiles, "$source.moc"); - $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); - } - } -} - -sub tag_KCFGFILES () -{ - my @psources = split(/[\034\s]+/, $sources{$program}); - my @depFiles = (); - - foreach $source (@psources) { - - if ($source =~ m/\.kcfgc$/) { - - print STDERR "adding KCFG file $source\n" if ($verbose); - - my $qs = quotemeta($source); - $sources{$program} =~ s/$qs//; - $sources_changed{$program} = 1; - - $source =~ s/\.kcfgc$//; - - my $sourcedir = ''; - if (-f "$makefileDir/$source.kcfgc") { - $sourcedir = '$(srcdir)/'; - } - - if (!$kcfgFiles{$source}) { - $kcfg = "$program.kcfg"; - findKcfgFile("$source.kcfgc"); - - my $fixsuffix = ""; - $fixsuffix = "else mv $source.cpp $source.$cxxsuffix ; " - unless "cpp" eq $cxxsuffix; - - my $dep_lines = "$source.$cxxsuffix: $source.h\n"; - $dep_lines .= "$source.h: $sourcedir$kcfg $sourcedir$source.kcfgc \$(KCFG_DEPENDENCIES)\n"; - $dep_lines .= "\t\$(KCONFIG_COMPILER) $sourcedir$kcfg $sourcedir$source.kcfgc; ret=\$\$?; \\\n"; - $dep_lines .= "\tif test \"\$\$ret\" != 0; then rm -f $source.h ; exit \$\$ret ; $fixsuffix fi\n\n"; - - $rule_adds{"$source.$cxxsuffix"} = $dep_lines; - - $kcfgFiles{$source} = 1; - } - - if ($program =~ /_la$/) { - $realObjs{$program} .= " $source.lo"; - } else { - $realObjs{$program} .= " $source.\$(OBJEXT)"; - } - $sources{$program} .= " $source.$cxxsuffix"; - $sources_changed{$program} = 1; - $important{$program} .= "$source.h "; - $kcfg_output .= "\\\n\t$source.$cxxsuffix $source.h "; - push(@cleanfiles, "$source.$cxxsuffix"); - push(@cleanfiles, "$source.h"); - $dep_files .= " \$(DEPDIR)/$source.P" if($dep_files !~/$source.P/ ); - } - } -} - -sub tag_ICON() -{ - my $lookup = '([^\s]*)_ICON\s*=[ \t]*(.*)'; - my $install = ""; - my $uninstall = ""; - - while ($MakefileData =~ /\n$lookup/g) { - my $destdir; - if ($1 eq "KDE") { - $destdir = "kde_icondir"; - } else { - $destdir = $1 . "dir"; - } - my $iconauto = ($2 =~ /AUTO\s*$/); - my @appnames = (); - if ( ! $iconauto ) { - my $appicon_str = $2; - my @_appnames = split(" ", $appicon_str); - print STDOUT "KDE_ICON processing <@_appnames>\n" if ($verbose); - foreach $appname (@_appnames) { - push(@appnames, quotemeta($appname)); - } - } else { - print STDOUT "KDE_ICON processing \n" if ($verbose); - } - - my @files = (); - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); - next if (! -f $entry); - if ( $iconauto ) - { - push(@files, $entry) - if ($entry =~ /\.xpm/ || $entry =~ /\.png/ || $entry =~ /\.mng/ || $entry =~ /\.svg/); - } else { - foreach $appname (@appnames) { - push(@files, $entry) - if ($entry =~ /-$appname\.xpm/ || $entry =~ /-$appname\.png/ || $entry =~ /-$appname\.mng/ || $entry =~ /-$appname\.svg/); - } - } - } - closedir (THISDIR); - - my %directories = (); - - foreach $file (@files) { - my $newfile = $file; - my $prefix = $file; - $prefix =~ s/\.(png|xpm|mng|svg|svgz)$//; - my $appname = $prefix; - $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; - $appname =~ s/^[^-]+-// if ($appname =~ /-/) ; - $appname = quotemeta($appname); - $prefix =~ s/$appname$//; - $prefix =~ s/-$//; - - $prefix = 'lo16-app' if ($prefix eq 'mini'); - $prefix = 'lo32-app' if ($prefix eq 'lo'); - $prefix = 'hi48-app' if ($prefix eq 'large'); - $prefix .= '-app' if ($prefix =~ m/^...$/); - - my $type = $prefix; - $type =~ s/^.*-([^-]+)$/$1/; - $prefix =~ s/^(.*)-[^-]+$/$1/; - - my %type_hash = - ( - 'action' => 'actions', - 'app' => 'apps', - 'device' => 'devices', - 'filesys' => 'filesystems', - 'mime' => 'mimetypes' - ); - - if (! defined $type_hash{$type} ) { - print STDERR "unknown icon type $type in $printname ($file)\n"; - next; - } - - my %dir_hash = - ( - 'los' => 'locolor/16x16', - 'lom' => 'locolor/32x32', - 'him' => 'hicolor/32x32', - 'hil' => 'hicolor/48x48', - 'lo16' => 'locolor/16x16', - 'lo22' => 'locolor/22x22', - 'lo32' => 'locolor/32x32', - 'hi16' => 'hicolor/16x16', - 'hi22' => 'hicolor/22x22', - 'hi32' => 'hicolor/32x32', - 'hi48' => 'hicolor/48x48', - 'hi64' => 'hicolor/64x64', - 'hi128' => 'hicolor/128x128', - 'hisc' => 'hicolor/scalable', - 'cr16' => 'crystalsvg/16x16', - 'cr22' => 'crystalsvg/22x22', - 'cr32' => 'crystalsvg/32x32', - 'cr48' => 'crystalsvg/48x48', - 'cr64' => 'crystalsvg/64x64', - 'cr128' => 'crystalsvg/128x128', - 'crsc' => 'crystalsvg/scalable' - ); - - $newfile =~ s@.*-($appname\.(png|xpm|mng|svgz|svg?))@$1@; - - if (! defined $dir_hash{$prefix}) { - print STDERR "unknown icon prefix $prefix in $printname\n"; - next; - } - - my $dir = $dir_hash{$prefix} . "/" . $type_hash{$type}; - if ($newfile =~ /-[^\.]/) { - my $tmp = $newfile; - $tmp =~ s/^([^-]+)-.*$/$1/; - $dir = $dir . "/" . $tmp; - $newfile =~ s/^[^-]+-//; - } - - if (!defined $directories{$dir}) { - $install .= "\t\$(mkinstalldirs) \$(DESTDIR)\$($destdir)/$dir\n"; - $directories{$dir} = 1; - } - - $install .= "\t\$(INSTALL_DATA) \$(srcdir)/$file \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; - $uninstall .= "\t-rm -f \$(DESTDIR)\$($destdir)/$dir/$newfile\n"; - - } - } - - if (length($install)) { - $target_adds{"install-data-am"} .= "install-kde-icons "; - $target_adds{"uninstall-am"} .= "uninstall-kde-icons "; - appendLines("install-kde-icons:\n" . $install . "\nuninstall-kde-icons:\n" . $uninstall); - } -} - -sub handle_POFILES($$) -{ - my @pofiles = split(" ", $_[0]); - my $lang = $_[1]; - - # Build rules for creating the gmo files - my $tmp = ""; - my $allgmofiles = ""; - my $pofileLine = "POFILES ="; - foreach $pofile (@pofiles) - { - $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension - $tmp .= "$1.gmo: $pofile\n"; - $tmp .= "\trm -f $1.gmo; \$(GMSGFMT) -o $1.gmo \$(srcdir)/$pofile\n"; - $tmp .= "\ttest ! -f $1.gmo || touch $1.gmo\n"; - $allgmofiles .= " $1.gmo"; - $pofileLine .= " $1.po"; - } - appendLines ($tmp); - my $lookup = 'POFILES\s*=([^\n]*)'; - if ($MakefileData !~ /\n$lookup/) { - appendLines("$pofileLine\nGMOFILES =$allgmofiles"); - } else { - substituteLine ($lookup, "$pofileLine\nGMOFILES =$allgmofiles"); - } - - if ($allgmofiles) { - - # Add the "clean" rule so that the maintainer-clean does something - appendLines ("clean-nls:\n\t-rm -f $allgmofiles\n"); - - $target_adds{"maintainer-clean"} .= "clean-nls "; - - $lookup = 'DISTFILES\s*=[ \t]*(.*)'; - if ($MakefileData =~ /\n$lookup/) { - $tmp = "DISTFILES = \$(GMOFILES) \$(POFILES) $1"; - substituteLine ($lookup, $tmp); - } - } - - $target_adds{"install-data-am"} .= "install-nls "; - - $tmp = "install-nls:\n"; - if ($lang) { - $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES\n"; - } - $tmp .= "\t\@for base in "; - foreach $pofile (@pofiles) - { - $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension - $tmp .= "$1 "; - } - - $tmp .= "; do \\\n"; - if ($lang) { - $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; - $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; - $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/\$\$base.mo ;\\\n"; - $tmp .= "\t fi ;\\\n"; - } else { - $tmp .= "\t echo \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; - $tmp .= "\t \$(mkinstalldirs) \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES ; \\\n"; - $tmp .= "\t if test -f \$\$base.gmo; then \$(INSTALL_DATA) \$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; - $tmp .= "\t elif test -f \$(srcdir)/\$\$base.gmo; then \$(INSTALL_DATA) \$(srcdir)/\$\$base.gmo \$(DESTDIR)\$(kde_locale)/\$\$base/LC_MESSAGES/\$(PACKAGE).mo ;\\\n"; - $tmp .= "\t fi ;\\\n"; - } - $tmp .= "\tdone\n\n"; - appendLines ($tmp); - - $target_adds{"uninstall"} .= "uninstall-nls "; - - $tmp = "uninstall-nls:\n"; - foreach $pofile (@pofiles) - { - $pofile =~ /(.*)\.[^\.]*$/; # Find name minus extension - if ($lang) { - $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$lang/LC_MESSAGES/$1.mo\n"; - } else { - $tmp .= "\trm -f \$(DESTDIR)\$(kde_locale)/$1/LC_MESSAGES/\$(PACKAGE).mo\n"; - } - } - appendLines($tmp); - - $target_adds{"all"} .= "all-nls "; - - $tmp = "all-nls: \$(GMOFILES)\n"; - - appendLines($tmp); - - $target_adds{"distdir"} .= "distdir-nls "; - - $tmp = "distdir-nls:\$(GMOFILES)\n"; - $tmp .= "\tfor file in \$(POFILES); do \\\n"; - $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; - $tmp .= "\tdone\n"; - $tmp .= "\tfor file in \$(GMOFILES); do \\\n"; - $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; - $tmp .= "\tdone\n"; - - appendLines ($tmp); - - if (!$lang) { - appendLines("merge:\n\t\$(MAKE) -f \$(top_srcdir)/admin/Makefile.common package-merge POFILES=\"\${POFILES}\" PACKAGE=\${PACKAGE}\n\n"); - } - -} - -#----------------------------------------------------------------------------- - -# Returns 0 if the line was processed - 1 otherwise. -# Errors are logged in the global $errorflags -sub tag_POFILES () -{ - my $lookup = 'POFILES\s*=([^\n]*)'; - return 1 if ($MakefileData !~ /\n$lookup/); - print STDOUT "POFILES processing <$1>\n" if ($verbose); - - my $tmp = $1; - - # make sure these are all gone. - if ($MakefileData =~ /\n\.po\.gmo:\n/) - { - print STDERR "Warning: Found old .po.gmo rules in $printname. New po rules not added\n"; - return 1; - } - - # Either find the pofiles in the directory (AUTO) or use - # only the specified po files. - my $pofiles = ""; - if ($tmp =~ /^\s*AUTO\s*$/) - { - opendir (THISDIR, "."); - $pofiles = join(" ", grep(/\.po$/, readdir(THISDIR))); - closedir (THISDIR); - print STDOUT "pofiles found = $pofiles\n" if ($verbose); - if (-f "charset" && -f "kdelibs/kdelibs.po") { - handle_TOPLEVEL(); - } - } - else - { - $tmp =~ s/\034/ /g; - $pofiles = $tmp; - } - return 1 if (!$pofiles); # Nothing to do - - handle_POFILES($pofiles, $kdelang); - - return 0; -} - -sub helper_LOCALINSTALL($) -{ - my $lookup = "\035" . $_[0] . " *:[^\035]*\035\t"; - my $copy = $MakefileData; - $copy =~ s/\n/\035/g; - if ($copy =~ /($lookup.*)$/) { - - $install = $1; - $install =~ s/\035$_[0] *:[^\035]*\035//; - my $emptyline = 0; - while (! $emptyline ) { - if ($install =~ /([^\035]*)\035(.*)/) { - local $line = $1; - $install = $2; - if ($line !~ /^\s*$/ && $line !~ /^(\@.*\@)*\t/) { - $emptyline = 1; - } else { - replaceDestDir($line); - } - } else { - $emptyline = 1; - } - } - } - -} - -sub tag_LOCALINSTALL () -{ - helper_LOCALINSTALL('install-exec-local'); - helper_LOCALINSTALL('install-data-local'); - helper_LOCALINSTALL('uninstall-local'); - - return 0; -} - -sub replaceDestDir($) { - local $line = $_[0]; - - if ( $line =~ /^\s*(\@.*\@)*\s*\$\(mkinstalldirs\)/ - || $line =~ /^\s*(\@.*\@)*\s*\$\(INSTALL\S*\)/ - || $line =~ /^\s*(\@.*\@)*\s*(-?rm.*) \S*$/) - { - $line =~ s/^(.*) ([^\s]+)\s*$/$1 \$(DESTDIR)$2/ if ($line !~ /\$\(DESTDIR\)/); - } - - if ($line ne $_[0]) { - $_[0] = quotemeta $_[0]; - substituteLine($_[0], $line); - } -} - -#--------------------------------------------------------------------------- -# libtool is very hard to persuade it could use -Wl,--no-undefined for making -# -no-undefined actually work -# append $(KDE_NO_UNFINED) after every -no-undefined in LDFLAGS -# this may go away if libtool ever does this on its own -sub tag_NO_UNDEFINED () { - return if ($program !~ /_la$/); - - my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; - $MakefileData =~ m/$lookup/; - return if (!defined($1)); - return if ($1 !~ /CXXLINK/); - - if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ ) { - return; - } - - $lookup = $program . '\_LDFLAGS(\s*)=(.*)-no-undefined(.*)'; - if ($MakefileData =~ /\n$lookup\n/) { - my $replace = $program . "\_LDFLAGS$1=$2-no-undefined \$(KDE_NO_UNDEFINED)$3"; - substituteLine($lookup, $replace); - } -} - -sub tag_CLOSURE () { - return if ($program !~ /_la$/); - - my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; - $MakefileData =~ m/$lookup/; - return if (!defined($1)); - return if ($1 !~ /CXXLINK/); - - if ($MakefileData !~ /\n$program\_LDFLAGS\s*=.*-no-undefined/ && - $MakefileData !~ /\n$program\_LDFLAGS\s*=.*KDE_PLUGIN/ ) { - print STDERR "Report: $program contains undefined in $printname\n" if ($program =~ /^lib/ && $dryrun); - return; - } - - my $closure = $realname{$program} . ".closure"; - my $lines = "$closure: \$($program\_OBJECTS) \$($program\_DEPENDENCIES)\n"; - $lines .= "\t\@echo \"int main() {return 0;}\" > $program\_closure.$cxxsuffix\n"; - $lines .= "\t\@\$\(LTCXXCOMPILE\) -c $program\_closure.$cxxsuffix\n"; - $lines .= "\t\$\(CXXLINK\) $program\_closure.lo \$($program\_LDFLAGS) \$($program\_OBJECTS) \$($program\_LIBADD) \$(LIBS)\n"; - $lines .= "\t\@rm -f $program\_closure.* $closure\n"; - $lines .= "\t\@echo \"timestamp\" > $closure\n"; - $lines .= "\n"; - appendLines($lines); - $lookup = $realname{$program} . ": (.*)"; - if ($MakefileData =~ /\n$lookup\n/) { - $lines = "\@KDE_USE_CLOSURE_TRUE@". $realname{$program} . ": $closure $1"; - $lines .= "\n\@KDE_USE_CLOSURE_FALSE@" . $realname{$program} . ": $1"; - substituteLine($lookup, $lines); - } - $closure_output .= " $closure"; -} - -sub tag_NMCHECK () { - return if ($program !~ /_la$/); - my $lookup = quotemeta($realname{$program}) . ":.*?\n\t.*?\\((.*?)\\) .*\n"; - $MakefileData =~ m/$lookup/; - my $linkcmd = $1; - return if (!defined($1)); - return if ($linkcmd !~ /CXXLINK/ && $linkcmd !~ /LINK/); - - $lookup = $program . '_NMCHECK\s*=([^\n]*)'; - if( $MakefileData !~ m/\n$lookup\n/ ) { - return; - } - my $allowed = $1; - $allowed =~ s/^ *//; - $lookup = $program . '_NMCHECKWEAK\s*=([^\n]*)'; - my $weak = ""; - my $is_weak = 0; - if( $MakefileData =~ m/\n$lookup\n/ ) { - $weak = $1; - $is_weak = 1; - } - $weak =~ s/^ *//; - - if( $is_weak ) - { - $weak = '--allowweak=\'' . $weak . '\' '; - } - my $nmline = "\@KDE_USE_NMCHECK_TRUE@\t\@\$(MAKE) \$(AM_MAKEFLAGS) nmcheck_$realname{$program} || ( rm -f $realname{$program}; exit 1 )"; - $lookup = '(\t\$\(CXXLINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; - if( $MakefileData =~ /\n$lookup\n/ ) { - my $oldstuff = $1; - substituteLine( $lookup, $oldstuff . "\n" . $nmline ); - } - $lookup = '(\t\$\(LINK\)[^\n]*' . $program . '_OBJECTS[^\n]*)'; - if( $MakefileData =~ /\n$lookup\n/ ) { - my $oldstuff = $1; - substituteLine( $lookup, $oldstuff . "\n" . $nmline ); - } - $nmline = "\@\$(top_srcdir)/admin/nmcheck $realname{$program} \'$allowed\' $weak"; - appendLines( "\nnmcheck_$realname{$program}: $realname{$program} \n\t$nmline\n" ); - $target_adds{ "nmcheck" } .= "nmcheck_$realname{$program} "; -} - -sub tag_DIST () { - my %foundfiles = (); - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry eq "Makefile" || $entry =~ /~$/ || $entry =~ /^\#.*\#$/); - next if (! -f $entry); - next if ($entry =~ /\.moc/ || $entry =~ /\.moc.$cppExt$/ || $entry =~ /\.lo$/ || $entry =~ /\.la$/ || $entry =~ /\.o/); - next if ($entry =~ /\.all_$cppExt\.$cppExt$/); - $foundfiles{$entry} = 1; - } - closedir (THISDIR); - - # doing this for MAINTAINERCLEANFILES would be wrong - my @marks = ("EXTRA_DIST", "DIST_COMMON", '\S*_SOURCES', '\S*_HEADERS', 'CLEANFILES', 'DISTCLEANFILES', '\S*_OBJECTS'); - foreach $mark (@marks) { - while ($MakefileData =~ /\n($mark)\s*=[ \t]*([^\n]*)/g) { - my $cleanfiles_str = $2; - foreach $file (split('[\034\s]+', $cleanfiles_str)) { - $file =~ s/\.\///; - $foundfiles{$file} = 0 if (defined $foundfiles{$file}); - } - } - } - my @files = ("Makefile", "config.cache", "config.log", "stamp-h", - "stamp-h1", "stamp-h1", "config.h", "Makefile", - "config.status", "config.h", "libtool", "core" ); - foreach $file (@files) { - $foundfiles{$file} = 0 if (defined $foundfiles{$file}); - } - - my $KDE_DIST = ""; - foreach $file (keys %foundfiles) { - if ($foundfiles{$file} == 1) { - $KDE_DIST .= "$file "; - } - } - if ($KDE_DIST) { - print "KDE_DIST $printname $KDE_DIST\n" if ($verbose); - - my $lookup = 'DISTFILES\s*=[ \t]*(.*)'; - if ($MakefileData =~ /\n$lookup/) { - substituteLine($lookup, "DISTFILES = $1 \$(KDE_DIST)"); - appendLines("KDE_DIST=$KDE_DIST\n"); - } - } -} - -#----------------------------------------------------------------------------- -# Returns 0 if the line was processed - 1 otherwise. -# Errors are logged in the global $errorflags -sub tag_DOCFILES () -{ - $target_adds{"all"} .= "docs-am "; - - my $lookup = 'KDE_DOCS\s*=[ \t]*([^\n]*)'; - goto nodocs if ($MakefileData !~ /\n$lookup/); - print STDOUT "KDE_DOCS processing <$1>\n" if ($verbose); - - my $tmp = $1; - - # Either find the files in the directory (AUTO) or use - # only the specified po files. - my $files = ""; - my $appname = $tmp; - $appname =~ s/^(\S*)\s*.*$/$1/; - if ($appname =~ /AUTO/) { - $appname = basename($makefileDir); - if ("$appname" eq "en") { - print STDERR "Error: KDE_DOCS = AUTO relies on the directory name. Yours is 'en' - you most likely want something else, e.g. KDE_DOCS = myapp\n"; - exit(1); - } - } - - if ($tmp !~ / - /) - { - opendir (THISDIR, "."); - foreach $entry (readdir(THISDIR)) { - next if ($entry eq "CVS" || $entry =~ /^\./ || $entry =~ /^Makefile/ || $entry =~ /~$/ || $entry =~ /^\#.*\#$/ || $entry eq "core" || $entry eq "index.cache.bz2"); - next if (! -f $entry); - $files .= "$entry "; - } - closedir (THISDIR); - print STDOUT "docfiles found = $files\n" if ($verbose); - } - else - { - $tmp =~ s/\034/ /g; - $tmp =~ s/^\S*\s*-\s*//; - $files = $tmp; - } - goto nodocs if (!$files); # Nothing to do - - if ($files =~ /(^| )index\.docbook($| )/) { - - my $lines = ""; - my $lookup = 'MEINPROC\s*='; - if ($MakefileData !~ /\n($lookup)/) { - $lines = "MEINPROC=/\$(kde_bindir)/meinproc\n"; - } - $lookup = 'KDE_XSL_STYLESHEET\s*='; - if ($MakefileData !~ /\n($lookup)/) { - $lines .= "KDE_XSL_STYLESHEET=/\$(kde_datadir)/ksgmltools2/customization/kde-chunk.xsl\n"; - } - $lookup = '\nindex.cache.bz2:'; - if ($MakefileData !~ /\n($lookup)/) { - $lines .= "index.cache.bz2: \$(srcdir)/index.docbook \$(KDE_XSL_STYLESHEET) $files\n"; - $lines .= "\t\@if test -n \"\$(MEINPROC)\"; then echo \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; \$(MEINPROC) --check --cache index.cache.bz2 \$(srcdir)/index.docbook; fi\n"; - $lines .= "\n"; - } - - $lines .= "docs-am: index.cache.bz2\n"; - $lines .= "\n"; - $lines .= "install-docs: docs-am install-nls\n"; - $lines .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; - $lines .= "\t\@if test -f index.cache.bz2; then \\\n"; - $lines .= "\techo \$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\t\$(INSTALL_DATA) index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\telif test -f \$(srcdir)/index.cache.bz2; then \\\n"; - $lines .= "\techo \$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\t\$(INSTALL_DATA) \$(srcdir)/index.cache.bz2 \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/; \\\n"; - $lines .= "\tfi\n"; - $lines .= "\t-rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; - $lines .= "\t\$(LN_S) \$(kde_libs_htmldir)/$kdelang/common \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/common\n"; - - $lines .= "\n"; - $lines .= "uninstall-docs:\n"; - $lines .= "\t-rm -rf \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; - $lines .= "\n"; - $lines .= "clean-docs:\n"; - $lines .= "\t-rm -f index.cache.bz2\n"; - $lines .= "\n"; - $target_adds{"install-data-am"} .= "install-docs "; - $target_adds{"uninstall"} .= "uninstall-docs "; - $target_adds{"clean-am"} .= "clean-docs "; - appendLines ($lines); - } else { - appendLines("docs-am: $files\n"); - } - - $target_adds{"install-data-am"} .= "install-nls "; - $target_adds{"uninstall"} .= "uninstall-nls "; - - $tmp = "install-nls:\n"; - $tmp .= "\t\$(mkinstalldirs) \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname\n"; - $tmp .= "\t\@for base in $files; do \\\n"; - $tmp .= "\t echo \$(INSTALL_DATA) \$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; - $tmp .= "\t \$(INSTALL_DATA) \$(srcdir)/\$\$base \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; - $tmp .= "\tdone\n"; - if ($appname eq 'common') { - $tmp .= "\t\@echo \"merging common and language specific dir\" ;\\\n"; - $tmp .= "\tif test ! -f \$(kde_htmldir)/en/common/kde-common.css; then echo 'no english docs found in \$(kde_htmldir)/en/common/'; exit 1; fi \n"; - $tmp .= "\t\@com_files=`cd \$(kde_htmldir)/en/common && echo *` ;\\\n"; - $tmp .= "\tcd \$(DESTDIR)\$(kde_htmldir)/$kdelang/common ;\\\n"; - $tmp .= "\tif test -n \"\$\$com_files\"; then for p in \$\$com_files ; do \\\n"; - $tmp .= "\t case \" $files \" in \\\n"; - $tmp .= "\t *\" \$\$p \"*) ;; \\\n"; - $tmp .= "\t *) test ! -f \$\$p && echo \$(LN_S) ../../en/common/\$\$p \$(DESTDIR)\$(kde_htmldir)/$kdelang/common/\$\$p && \$(LN_S) ../../en/common/\$\$p \$\$p ;; \\\n"; - $tmp .= "\t esac ; \\\n"; - $tmp .= "\tdone ; fi ; true\n"; - } - $tmp .= "\n"; - $tmp .= "uninstall-nls:\n"; - $tmp .= "\tfor base in $files; do \\\n"; - $tmp .= "\t rm -f \$(DESTDIR)\$(kde_htmldir)/$kdelang/$appname/\$\$base ;\\\n"; - $tmp .= "\tdone\n\n"; - appendLines ($tmp); - - $target_adds{"distdir"} .= "distdir-nls "; - - $tmp = "distdir-nls:\n"; - $tmp .= "\tfor file in $files; do \\\n"; - $tmp .= "\t cp \$(srcdir)/\$\$file \$(distdir); \\\n"; - $tmp .= "\tdone\n"; - - appendLines ($tmp); - - return 0; - - nodocs: - appendLines("docs-am:\n"); - return 1; -} - -#----------------------------------------------------------------------------- -# Find headers in any of the source directories specified previously, that -# are candidates for "moc-ing". -sub findMocCandidates () -{ - foreach $dir (@headerdirs) - { - my @list = (); - opendir (SRCDIR, "$dir"); - @hFiles = grep { /.+\.$hExt$/o && !/^\./ } readdir(SRCDIR); - closedir SRCDIR; - foreach $hf (@hFiles) - { - next if ($hf =~ /^\.\#/); - $hf =~ /(.*)\.[^\.]*$/; # Find name minus extension - next if ($uiFiles{$1}); - open (HFIN, "$dir/$hf") || die "Could not open $dir/$hf: $!\n"; - my $hfsize = 0; - seek(HFIN, 0, 2); - $hfsize = tell(HFIN); - seek(HFIN, 0, 0); - read HFIN, $hfData, $hfsize; - close HFIN; - # push (@list, $hf) if(index($hfData, "Q_OBJECT") >= 0); ### fast but doesn't handle //Q_OBJECT - # handle " { friend class blah; Q_OBJECT ", but don't match antlarr_Q_OBJECT (\b). - if ( $hfData =~ /{([^}]*)\bQ_OBJECT/s ) { - push (@list, $hf) unless $1 =~ m://[^\n]*Q_OBJECT[^\n]*$:s; ## reject "// Q_OBJECT" - } - } - # The assoc array of root of headerfile and header filename - foreach $hFile (@list) - { - $hFile =~ /(.*)\.[^\.]*$/; # Find name minus extension - if ($mocFiles{$1}) - { - print STDERR "Warning: Multiple header files found for $1\n"; - next; # Use the first one - } - $mocFiles{$1} = "$dir\035$hFile"; # Add relative dir - } - } - - return 0; -} - -#----------------------------------------------------------------------------- - -# The programmer has specified a moc list. Prune out the moc candidates -# list that we found based on looking at the header files. This generates -# a warning if the programmer gets the list wrong, but this doesn't have -# to be fatal here. -sub pruneMocCandidates ($) -{ - my %prunedMoc = (); - local @mocList = split(' ', $_[0]); - - foreach $mocname (@mocList) - { - $mocname =~ s/\.moc$//; - if ($mocFiles{$mocname}) - { - $prunedMoc{$mocname} = $mocFiles{$mocname}; - } - else - { - my $print = $makefileDir; - $print =~ s/^\Q$topdir\E\\//; - # They specified a moc file but we can't find a header that - # will generate this moc file. That's possible fatal! - print STDERR "Warning: No moc-able header file for $print/$mocname\n"; - } - } - - undef %mocFiles; - %mocFiles = %prunedMoc; -} - -#----------------------------------------------------------------------------- - -# Finds the cpp files (If they exist). -# The cpp files get appended to the header file separated by \035 -sub checkMocCandidates () -{ - my @cppFiles; - my $cpp2moc; # which c++ file includes which .moc files - my $moc2cpp; # which moc file is included by which c++ files - - return unless (keys %mocFiles); - opendir(THISDIR, ".") || return; - @cppFiles = grep { /.+\.$cppExt$/o && !/.+\.moc\.$cppExt$/o - && !/.+\.all_$cppExt\.$cppExt$/o - && !/^\./ } readdir(THISDIR); - closedir THISDIR; - return unless (@cppFiles); - my $files = join (" ", @cppFiles); - $cpp2moc = {}; - $moc2cpp = {}; - foreach $cxxf (@cppFiles) - { - open (CXXFIN, $cxxf) || die "Could not open $cxxf: $!\n"; - seek(CXXFIN, 0, 2); - my $cxxfsize = tell(CXXFIN); - seek(CXXFIN, 0, 0); - read CXXFIN, $cxxfData, $cxxfsize; - close CXXFIN; - while(($cxxfData =~ m/^[ \t]*\#include\s*[<\"](.*\.moc)[>\"]/gm)) { - $cpp2moc->{$cxxf}->{$1} = 1; - $moc2cpp->{$1}->{$cxxf} = 1; - } - } - foreach my $mocFile (keys (%mocFiles)) - { - @cppFiles = keys %{$moc2cpp->{"$mocFile.moc"}}; - if (@cppFiles == 1) { - $mocFiles{$mocFile} .= "\035" . $cppFiles[0]; - push(@depend, $mocFile); - } elsif (@cppFiles == 0) { - push (@newObs, $mocFile); # Produce new object file - next if ($haveAutomocTag); # This is expected... - # But this is an error we can deal with - let them know - print STDERR - "Warning: No c++ file that includes $mocFile.moc\n"; - } else { - # We can't decide which file to use, so it's fatal. Although as a - # guess we could use the mocFile.cpp file if it's in the list??? - print STDERR - "Error: Multiple c++ files that include $mocFile.moc\n"; - print STDERR "\t",join ("\t", @cppFiles),"\n"; - $errorflag = 1; - delete $mocFiles{$mocFile}; - # Let's continue and see what happens - They have been told! - } - } -} - -#----------------------------------------------------------------------------- - -# Add the rules for generating moc source from header files -# For Automoc output *.moc.cpp but normally we'll output *.moc -# (We must compile *.moc.cpp separately. *.moc files are included -# in the appropriate *.cpp file by the programmer) -sub addMocRules () -{ - my $cppFile; - my $hFile; - - foreach $mocFile (keys (%mocFiles)) - { - undef $cppFile; - ($dir, $hFile, $cppFile) = split ("\035", $mocFiles{$mocFile}, 3); - $dir =~ s#^\.#\$(srcdir)#; - if (defined ($cppFile)) - { - $cppFile =~ s,\.[^.]*$,,; - $target_adds{"$cppFile.o"} .= "$mocFile.moc "; - $target_adds{"$cppFile.lo"} .= "$mocFile.moc "; - appendLines ("$mocFile.moc: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile.moc\n"); - $cleanMoc .= " $mocFile.moc"; - appendLines ("mocs: $mocFile.moc\n"); - } - else - { - appendLines ("$mocFile$mocExt: $dir/$hFile\n\t\$(MOC) $dir/$hFile -o $mocFile$mocExt\n"); - $cleanMoc .= " $mocFile$mocExt"; - appendLines ("mocs: $mocFile$mocExt\n"); - } - } -} - -sub make_bcheck_target() -{ - my $lookup = 'RECURSIVE_TARGETS\s*=[ \t]*(.*)'; - my $bcheckdep = "bcheck-am"; - $bcheckdep = "bcheck-recursive" if ($MakefileData =~ /\n$lookup/); - - my $headers= ""; - $headers = $1 if($MakefileData =~ /\nHEADERS\s*=[ \t]*(.+)/); - $headers =~ s/\$\((?:noinst|EXTRA)_HEADERS\)//g; - - $target_adds{"clean-am"} .= "clean-bcheck "; - - my $t = "clean-bcheck: \n" . - "\trm -f *.bchecktest.cc *.bchecktest.cc.class a.out\n\n" . - "bcheck: $bcheckdep\n\n" . - "bcheck-am:\n" . - "\t\@for i in $headers; do \\\n" . - "\t if test \$(srcdir)/\$\$i -nt \$\$i.bchecktest.cc; then \\\n" . - "\t echo \"int main() {return 0;}\" > \$\$i.bchecktest.cc ; \\\n" . - "\t echo \"#include \\\"\$\$i\\\"\" >> \$\$i.bchecktest.cc ; \\\n" . - "\t echo \"\$\$i\"; \\\n" . - "\t if ! "; - $t .= $cxxsuffix eq "KKK" ? - "\$(CXX) \$(DEFS) -I. -I\$(srcdir) -I\$(top_builddir) \$(INCLUDES) \$(AM_CPPFLAGS) \$(CPPFLAGS) \$(CXXFLAGS) \$(KDE_CXXFLAGS) " : - "\$(CXXCOMPILE) "; - $t .= " --dump-class-hierarchy -c \$\$i.bchecktest.cc; then \\\n" . - "\t rm -f \$\$i.bchecktest.cc; exit 1; \\\n" . - "\t fi ; \\\n" . - "\t echo \"\" >> \$\$i.bchecktest.cc.class; \\\n" . - "\t perl \$(top_srcdir)/admin/bcheck.pl \$\$i.bchecktest.cc.class || { rm -f \$\$i.bchecktest.cc; exit 1; }; \\\n" . - "\t rm -f a.out; \\\n" . - "\t fi ; \\\n" . - "\tdone\n"; - appendLines("$t\n"); -} - -sub make_meta_classes () -{ - return if ($kdeopts{"qtonly"}); - - my $cppFile; - my $hFile; - my $moc_class_headers = ""; - foreach $program (@programs) { - my $mocs = ""; - my @progsources = split(/[\034\s]+/, $sources{$program}); - my @depmocs = split(' ', $dependmocs{$program}); - my %shash = (), %mhash = (); - @shash{@progsources} = 1; # we are only interested in the existence - @mhash{@depmocs} = 1; - - print STDOUT "program=$program\n" if ($verbose); - print STDOUT "psources=[".join(' ', keys %shash)."]\n" if ($verbose); - print STDOUT "depmocs=[".join(' ', keys %mhash)."]\n" if ($verbose); - print STDOUT "globalmocs=[".join(' ', keys(%globalmocs))."]\n" if ($verbose); - foreach my $mocFile (keys (%globalmocs)) - { - my ($dir, $hFile, $cppFile) = split ("\035", $globalmocs{$mocFile}, 3); - if (defined ($cppFile)) - { - $mocs .= " $mocFile.moc" if exists $shash{$cppFile}; - } - else - { - # Bah. This is the case, if no C++ file includes the .moc - # file. We make a .moc.cpp file for that. Unfortunately this - # is not included in the %sources hash, but rather is mentioned - # in %dependmocs. If the user wants to use AUTO he can't just - # use an unspecific METAINCLUDES. Instead he must use - # program_METAINCLUDES. Anyway, it's not working real nicely. - # E.g. Its not clear what happens if user specifies two - # METAINCLUDES=AUTO in the same Makefile.am. - $mocs .= " $mocFile.moc.$cxxsuffix" - if exists $mhash{$mocFile.".moc.$cxxsuffix"}; - } - } - if ($mocs) { - print STDOUT "==> mocs=[".$mocs."]\n" if ($verbose); - } - print STDOUT "\n" if $verbose; - } - if ($moc_class_headers) { - appendLines ("$cleantarget-moc-classes:\n\t-rm -f $moc_class_headers\n"); - $target_adds{"$cleantarget-am"} .= "$cleantarget-moc-classes "; - } -} - -#----------------------------------------------------------------------------- - -sub updateMakefile () -{ - return if ($dryrun); - - open (FILEOUT, "> $makefile") - || die "Could not create $makefile: $!\n"; - - $MakefileData =~ s/\034/\\\n/g; # Restore continuation lines - # Append our $progId line, _below_ the "generated by automake" line - # because automake-1.6 relies on the first line to be his own. - my $progIdLine = "\# $progId - " . '$Revision: 483858 $ '."\n"; - if ( !( $MakefileData =~ s/^(.*generated .*by automake.*\n)/$1$progIdLine/ ) ) { - warn "automake line not found in $makefile\n"; - # Fallback: first line - print FILEOUT $progIdLine; - }; - print FILEOUT $MakefileData; - close FILEOUT; -} - -#----------------------------------------------------------------------------- - -# The given line needs to be removed from the makefile -# Do this by adding the special "removed line" comment at the line start. -sub removeLine ($$) -{ - my ($lookup, $old) = @_; - - $old =~ s/\034/\\\n#>- /g; # Fix continuation lines - $MakefileData =~ s/\n$lookup/\n#>\- $old/; -} - -#----------------------------------------------------------------------------- - -# Replaces the old line with the new line -# old line(s) are retained but tagged as removed. The new line(s) have the -# "added" tag placed before it. -sub substituteLine ($$) -{ - my ($lookup, $new) = @_; - - if ($MakefileData =~ /\n($lookup)/) { - $old = $1; - $old =~ s/\034/\\\n#>\- /g; # Fix continuation lines - my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; - $new =~ s/\\\n/\034/g; - $MakefileData =~ s/\n$lookup/\n#>- $old\n#>\+ $newCount\n$new/; - } else { - warn "Warning: substitution of \"$lookup\" in $printname failed\n"; - } -} - -#----------------------------------------------------------------------------- - -# Slap new lines on the back of the file. -sub appendLines ($) -{ - my ($new) = @_; - my $copynew = $new; - my $newCount = ($new =~ tr/\034//) + ($new =~ tr/\n//) + 1; - $new =~ s/\\\n/\034/g; # Fix continuation lines - $MakefileData .= "\n#>\+ $newCount\n$new"; -} - -#----------------------------------------------------------------------------- - -# Restore the Makefile.in to the state it was before we fiddled with it -sub restoreMakefile () -{ - $MakefileData =~ s/# $progId[^\n\034]*[\n\034]*//g; - # Restore removed lines - $MakefileData =~ s/([\n\034])#>\- /$1/g; - # Remove added lines - while ($MakefileData =~ /[\n\034]#>\+ ([^\n\034]*)/) - { - my $newCount = $1; - my $removeLines = ""; - while ($newCount--) { - $removeLines .= "[^\n\034]*([\n\034]|)"; - } - $MakefileData =~ s/[\n\034]#>\+.*[\n\034]$removeLines/\n/; - } -} - -#----------------------------------------------------------------------------- - -# find the .kcfg file listed in the .kcfgc file -sub findKcfgFile($) -{ - my ($kcfgf) = @_; - open (KCFGFIN, $kcfgf) || die "Could not open $kcfgf: $!\n"; - seek(KCFGFIN, 0, 2); - my $kcfgfsize = tell(KCFGFIN); - seek(KCFGFIN, 0, 0); - read KCFGFIN, $kcfgfData, $kcfgfsize; - close KCFGFIN; - if(($kcfgfData =~ m/^File=(.*\.kcfg)/gm)) { - $kcfg = $1; - } -} diff --git a/admin/bcheck.pl b/admin/bcheck.pl deleted file mode 100644 index cca973e..0000000 --- a/admin/bcheck.pl +++ /dev/null @@ -1,157 +0,0 @@ -#!/usr/bin/perl -w - -use DB_File; -use Fcntl ':flock'; - -if (!defined($ARGV[0])) { - print "usage: requires .class dump as parameter!\n"; - exit; -} - -sub bailout -{ - untie %bcheckdb if(defined(%bcheckdb)); - - if(defined(MYLOCK)) { - flock MYLOCK, LOCK_UN; - close(MYLOCK); - } - - print @_; - exit 5; -} - -sub ask_user -{ - my ($dbkey, $dbchunk) = @_; - - if (defined($ENV{"BCHECK_UPDATE"})) { - $bcheckdb{$dbkey} = $dbchunk; - return; - } - - &bailout("BC problem detected") if (! -t STDIN); - - print "(I)gnore / (Q)uit / (U)pdate: "; - - my $key; - while(defined(read STDIN, $key, 1)) { - $key = lc($key); - - print "got: >$key<\n"; - - return if ($key eq 'i'); - - &bailout("BC problem. aborted") if ($key eq 'q'); - - if ($key eq 'u') { - $bcheckdb{$dbkey} = $dbchunk; - return; - } - print "\n(I)gnore / (Q)uit / (U)pdate: "; - } -} - -sub diff_chunk($$) -{ - my ($oldl, $newl) = @_; - my @old = split /^/m, $oldl; - my @new = split /^/m, $newl; - my $haschanges = 0; - my $max = $#old > $#new ? $#old : $#new; - - die "whoops. key different" if ($old[0] ne $new[0]); - - if ($#old != $#new) { - warn ("Structural difference.\n"); - print @old; - print "-----------------------------------------------\n"; - print @new; - $haschanges = 1; - return $haschanges; - } - - print $old[0]; - - my ($class) = ($old[0] =~ /^(?:Class |Vtable for )(\S+)/); - - my $c = 1; - while ($c < $max) { - my ($o, $n) = ($old[$c], $new[$c]); - chomp $o; - chomp $n; - $c++; - next if ($o eq $n); - - if(defined($class) and $n =~ /^(\d+\s+)\w+(::\S+\s*.*)$/) { - next if ($n eq "$1$class$2"); - } - - $haschanges = 1; - - print "-$o\n+$n\n\n"; - } - - return $haschanges; -} - -local $dblock = $ENV{"HOME"} . "/bcheck.lock"; -my $dbfile = $ENV{"HOME"} . "/bcheck.db"; -my $cdump = $ARGV[0]; - -die "file $cdump is not readable: $!" if (! -f $cdump); - -# make sure the advisory lock exists -open(MYLOCK, ">$dblock"); -print MYLOCK ""; - -flock MYLOCK, LOCK_EX; - -tie %bcheckdb, 'DB_File', $dbfile; - -my $chunk = ""; - -open (IN, "<$cdump") or die "cannot open $cdump: $!"; -while () { - - chop; - - s/0x[0-9a-fA-F]+/0x......../g; - s/base size=/size=/g; - s/\(\)\s*$//g; - s/base align=/align=/g; - - $chunk .= $_ . "\n"; - - if(/^\s*$/) { - my @lines = split /^/m, $chunk; - my $key = $lines[0]; - chomp $key; - - if($key !~ // && - $key !~ //) { - if(defined($bcheckdb{$key})) { - my $dbversion = $bcheckdb{$key}; - - if($dbversion ne $chunk) { - &ask_user($key, $chunk) if(&diff_chunk($dbversion, $chunk)); - } - } - else { - $bcheckdb{$key} = $chunk; - print "NEW: $key\n"; - } - } - - $chunk = ""; - next; - } - -} -close(IN); - -untie %bcheckdb; -flock MYLOCK, LOCK_UN; -close(MYLOCK); - -exit 0; diff --git a/admin/compile b/admin/compile deleted file mode 100755 index 1b1d232..0000000 --- a/admin/compile +++ /dev/null @@ -1,142 +0,0 @@ -#! /bin/sh -# Wrapper for compilers which do not understand `-c -o'. - -scriptversion=2005-05-14.22 - -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. -# Written by Tom Tromey . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: compile [--help] [--version] PROGRAM [ARGS] - -Wrapper for compilers which do not understand `-c -o'. -Remove `-o dest.o' from ARGS, run PROGRAM with the remaining -arguments, and rename the output as expected. - -If you are trying to build a whole package this is not the -right script to run: please start by reading the file `INSTALL'. - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "compile $scriptversion" - exit $? - ;; -esac - -ofile= -cfile= -eat= - -for arg -do - if test -n "$eat"; then - eat= - else - case $1 in - -o) - # configure might choose to run compile as `compile cc -o foo foo.c'. - # So we strip `-o arg' only if arg is an object. - eat=1 - case $2 in - *.o | *.obj) - ofile=$2 - ;; - *) - set x "$@" -o "$2" - shift - ;; - esac - ;; - *.c) - cfile=$1 - set x "$@" "$1" - shift - ;; - *) - set x "$@" "$1" - shift - ;; - esac - fi - shift -done - -if test -z "$ofile" || test -z "$cfile"; then - # If no `-o' option was seen then we might have been invoked from a - # pattern rule where we don't need one. That is ok -- this is a - # normal compilation that the losing compiler can handle. If no - # `.c' file was seen then we are probably linking. That is also - # ok. - exec "$@" -fi - -# Name of file we expect compiler to create. -cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` - -# Create the lock directory. -# Note: use `[/.-]' here to ensure that we don't use the same name -# that we are using for the .o file. Also, base the name on the expected -# object file name, since that is what matters with a parallel build. -lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d -while true; do - if mkdir "$lockdir" >/dev/null 2>&1; then - break - fi - sleep 1 -done -# FIXME: race condition here if user kills between mkdir and trap. -trap "rmdir '$lockdir'; exit 1" 1 2 15 - -# Run the compile. -"$@" -ret=$? - -if test -f "$cofile"; then - mv "$cofile" "$ofile" -elif test -f "${cofile}bj"; then - mv "${cofile}bj" "$ofile" -fi - -rmdir "$lockdir" -exit $ret - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/admin/conf.change.pl b/admin/conf.change.pl deleted file mode 100644 index 129d759..0000000 --- a/admin/conf.change.pl +++ /dev/null @@ -1,191 +0,0 @@ -#!/usr/bin/env perl - -# this script patches a config.status file, to use our own perl script -# in the main loop -# we do it this way to circumvent hacking (and thereby including) -# autoconf function (which are GPL) into our LGPL acinclude.m4.in -# written by Michael Matz -# adapted by Dirk Mueller -# -# This file is free software; you can redistribute it and/or -# modify it under the terms of the GNU Library General Public -# License as published by the Free Software Foundation; either -# version 2 of the License, or (at your option) any later version. - -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Library General Public License for more details. - -# You should have received a copy of the GNU Library General Public License -# along with this library; see the file COPYING.LIB. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -# Boston, MA 02110-1301, USA. - -# we have to change two places -# 1. the splitting of the substitutions into chunks of 90 (or even 48 in -# later autoconf's -# 2. the big main loop which patches all Makefile.in's - -use strict; -use File::Basename; - -my $ac_aux_dir = dirname($0); -my ($flag); -my $ac_version = 0; -my $vpath_seen = 0; -$flag = 0; - -while (<>) { -# usage of $flag: 0 -- we have seen nothing yet -# 1 -- we are in (1) -# 2 -- we have ended (1) -# 3 -- we are in (2) -# 4 -- we ended (2) - - if ($flag == 4) { - print; - } elsif ($flag == 0) { -# 1. begins with (including): "ac_max_sed_\S+\s*=\s*[0-9]+..." -# ends with (excluding) "CONFIG_FILE=..." -# in later autoconf (2.14.1) there is no CONFIG_FILES= line, -# but instead the (2) directly follow (1) - if (/^\s*ac_max_sed_([a-z]+).*=\s*([0-9]+)/ ) { - $flag = 1; - if ($1 eq 'lines') { - # lets hope its different with 2141, - # wasn't able to verify that - if ($2 eq '48') { - $ac_version = 250; - } - else { - $ac_version = 2141; - } - } elsif ($1 eq 'cmds') { - $ac_version = 213; - } - # hmm, we don't know the autoconf version, but we try anyway - } else { - print; - } - } elsif ($flag == 1) { - if (/^\s*CONFIG_FILES=/ && ($ac_version != 250)) { - print; - $flag = 2; - } elsif (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { - $flag = 3; - } - } elsif ($flag == 2) { -# 2. begins with: "for ac_file in.*CONFIG_FILES" (the next 'for' after (1)) -# end with: "rm -f conftest.s\*" -# on autoconf 250, it ends with '# CONFIG_HEADER section' -# -# gg: if a post-processing commands section is found first, -# stop there and insert a new loop to honor the case/esac. -# (pattern: /^\s+#\sRun the commands associated with the file./) - - if (/^\s*for\s+ac_file\s+in\s+.*CONFIG_FILES/ ) { - $flag = 3; - } else { - print; - } - } elsif ($flag == 3) { - if (/^\s*rm\s+-f\s+conftest/ ) { - $flag = 4; - &insert_main_loop(); - } elsif (/^\s*rm\s+-f\s+.*ac_cs_root/ ) { - $flag = 4; - &insert_main_loop(); - #die "hhhhhhh"; - if ($ac_version != 2141) { - print STDERR "hmm, don't know autoconf version\n"; - } - } elsif (/^\#\s*CONFIG_(HEADER|COMMANDS) section.*|^\s+#\s(Run) the commands associated/) { - $flag = 4; - my $commands = defined $2; - &insert_main_loop(); - $commands && insert_command_loop(); - if($ac_version != 250) { - print STDERR "hmm, something went wrong :-(\n"; - } - } elsif (/VPATH/ ) { - $vpath_seen = 1; - } - } -} - -die "wrong input (flag != 4)" unless $flag == 4; -print STDERR "hmm, don't know autoconf version\n" unless $ac_version; - -sub insert_main_loop { - - if ($ac_version == 250) { - &insert_main_loop_250(); - } - else { - &insert_main_loop_213(); - } -} - -sub insert_main_loop_250 { - - print <>\$tmp/subs.sed -EOF - } - print <> \$tmp/subs.files - fi - done - if test -f \$tmp/subs.files ; then - perl $ac_aux_dir/config.pl "\$tmp/subs.sed" "\$tmp/subs.files" "\$srcdir" "\$INSTALL" - fi - rm -f \$tmp/subs.files - -fi -EOF - return; -} - -sub insert_main_loop_213 { - print <> \$ac_cs_root.subs -EOF - } - print <> \$ac_cs_root.sacfiles - fi -done -if test -f \$ac_cs_root.sacfiles ; then - perl $ac_aux_dir/config.pl "\$ac_cs_root.subs" "\$ac_cs_root.sacfiles" "\$ac_given_srcdir" "\$ac_given_INSTALL" -fi -rm -f \$ac_cs_root.s* - -EOF - return; -} - -sub insert_command_loop { - print <. -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerppc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - x86:Interix*:[34]*) - echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - *86) UNAME_PROCESSOR=i686 ;; - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/admin/config.pl b/admin/config.pl deleted file mode 100644 index c2b0517..0000000 --- a/admin/config.pl +++ /dev/null @@ -1,238 +0,0 @@ -#!/usr/bin/env perl -# a script for use by autoconf to make the Makefiles -# from the Makefile.in's -# -# the original autoconf mechanism first splits all substitutions into groups -# of ca. 90, and than invokes sed for _every_ Makefile.in and every group -# (so around 2-3 times per Makefile.in). So this takes forever, as sed -# has to recompile the regexps every time. -# -# this script does better. It changes all Makefile.ins in one process. -# in kdelibs the time for building Makefile went down from 2:59 min to 13 sec! -# -# written by Michael Matz -# adapted by Dirk Mueller - -# This file is free software; you can redistribute it and/or -# modify it under the terms of the GNU Library General Public -# License as published by the Free Software Foundation; either -# version 2 of the License, or (at your option) any later version. - -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Library General Public License for more details. - -# You should have received a copy of the GNU Library General Public License -# along with this library; see the file COPYING.LIB. If not, write to -# the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -# Boston, MA 02110-1301, USA. - -use strict; - -use File::Path; - -my $ac_subs=$ARGV[0]; -my $ac_sacfiles = $ARGV[1]; -my $ac_given_srcdir=$ARGV[2]; -my $ac_given_INSTALL=$ARGV[3]; - -my @comp_match; -my @comp_subs; - -#print "ac_subs=$ac_subs\n"; -#print "ac_sacfiles=$ac_sacfiles\n"; -#print "ac_given_srcdir=$ac_given_srcdir\n"; -#print "ac_given_INSTALL=$ac_given_INSTALL\n"; - -my $configure_input; -my ($srcdir, $top_srcdir); -my $INSTALL; -my $bad_perl = ($] < 5.005); -my $created_file_count = 0; - -open(CF, "< $ac_subs") || die "can't open $ac_subs: $!"; -my @subs = ; -my $pat; -close(CF); -chomp @subs; -@comp_match=(); -@comp_subs=(); - -if ($bad_perl) { - print "Using perl older than version 5.005\n"; - foreach $pat (@subs) { - if ( ($pat =~ m/s%([^%]*)%([^%]*)%g/ ) - || ($pat =~ m/s%([^%]*)%([^%]*)%;t/ ) - || ($pat =~ m/s,([^,]*),(.*),;t/) - || ($pat =~ m%s/([^/]*)/([^/]*)/g% ) - || ($pat =~ m%s/([^/]*)/([^/]*)/;t% ) - ) { - # form : s%bla%blubb%g - # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) - # or s,bla,blubb,;t t (autoconf 2.52) - my $srch = $1; - my $repl = $2; - $repl =~ s/\\(.)/$1/g; - push @comp_subs, make_closure($srch, $repl); - - } elsif ( ($pat =~ /%([^%]*)%d/ ) - || ($pat =~ m%/([^/]*)/d% ) - ) { - push @comp_subs, make_closure($1, ""); - } else { - die "Uhh. Malformed pattern in $ac_subs ($pat)" - unless ( $pat =~ /^\s*$/ ); # ignore white lines - } - } -} else { - foreach $pat (@subs) { - if ( ($pat =~ /s%([^%]*)%([^%]*)%g/ ) || - ($pat =~ /s%([^%]*)%([^%]*)%;t/ ) || - ($pat =~ /s,([^,]*),(.*),;t/) ) { - # form : s%bla%blubb%g - # or s%bla%blubb%;t t (autoconf > 2.13 and < 2.52 ?) - # or s,bla,blubb,;t t (autoconf 2.52) - my $srch = $1; - my $repl = $2; - push @comp_match, eval "qr/\Q$srch\E/"; # compile match pattern - $repl =~ s/\\(.)/$1/g; - push @comp_subs, $repl; - } elsif ( ($pat =~ /%([^%]*)%d/ ) - || ($pat =~ m%/([^/]*)/d% ) - ) { - push @comp_match, eval "qr/\Q$1\E/"; - push @comp_subs, ""; - } else { - die "Uhh. Malformed pattern in $ac_subs ($pat)" - unless ( $pat =~ /^\s*$/ ); # ignore white lines - } - } -} -undef @subs; - -# read the list of files to be patched, form: -# ./Makefile arts/Makefile arts/examples/Makefile arts/flow/Makefile - -open(CF, "< $ac_sacfiles") || die "can't open $ac_sacfiles: $!"; -my @ac_files = ; -close(CF); -chomp @ac_files; - - -my $ac_file; -foreach $ac_file (@ac_files) { - next if $ac_file =~ /\.\./; - next if $ac_file =~ /^\s*$/; - my $ac_file_in; - my ($ac_dir, $ac_dots, $ac_dir_suffix); - - if ($ac_file =~ /.*:.*/ ) { - ($ac_file_in = $ac_file) =~ s%[^:]*:%%; - $ac_file =~ s%:.*%%; - } else { - $ac_file_in = $ac_file.".in"; - } - -# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - -# Remove last slash and all that follows it. Not all systems have dirname. - ($ac_dir = $ac_file) =~ s%/[^/][^/]*$%%; - if ( ($ac_dir ne $ac_file) && ($ac_dir ne ".")) { -# The file is in a subdirectory. - if (! -d "$ac_dir") { mkpath "$ac_dir", 0, 0777; } - ($ac_dir_suffix = $ac_dir) =~ s%^./%%; - $ac_dir_suffix="/".$ac_dir_suffix; -# A "../" for each directory in $ac_dir_suffix. - ($ac_dots = $ac_dir_suffix) =~ s%/[^/]*%../%g; - } else { - $ac_dir_suffix=""; - $ac_dots=""; - } - - if ($ac_given_srcdir eq ".") { - $srcdir="."; - if ($ac_dots) { - ( $top_srcdir = $ac_dots) =~ s%/$%%; - } else { $top_srcdir="."; } - } elsif ($ac_given_srcdir =~ m%^/%) { - $srcdir=$ac_given_srcdir.$ac_dir_suffix; - $top_srcdir = $ac_given_srcdir; - } else { - $srcdir = $ac_dots.$ac_given_srcdir.$ac_dir_suffix; - $top_srcdir = $ac_dots.$ac_given_srcdir; - } - - if ($ac_given_INSTALL) { - if ($ac_given_INSTALL =~ m%^/% ) { - $INSTALL = $ac_given_INSTALL; - } else { - $INSTALL = $ac_dots.$ac_given_INSTALL; - } - } - - print "fast creating $ac_file\n"; - unlink $ac_file; - my $ac_comsub=""; - my $fname=$ac_file_in; - $fname =~ s%.*/%%; - $configure_input="$ac_file. Generated from $fname by config.pl."; - - my $ac_file_inputs; - ($ac_file_inputs = $ac_file_in) =~ s%^%$ac_given_srcdir/%; - $ac_file_inputs =~ s%:% $ac_given_srcdir/%g; - - patch_file($ac_file, $ac_file_inputs); - ++$created_file_count; -} - -print "config.pl: fast created $created_file_count file(s).\n"; - -sub patch_file { - my ($outf, $infiles) = @_; - my $filedata; - my @infiles=split(' ', $infiles); - my $i=0; - my $name; - - foreach $name (@infiles) { - if (open(CF, "< $name")) { - while () { - $filedata .= $_; - } - close(CF); - } else { - print STDERR "can't open $name: $!"."\n"; - } - } - - $filedata =~ s%\@configure_input\@%$configure_input%g; - $filedata =~ s%\@srcdir\@%$srcdir%g; - $filedata =~ s%\@top_srcdir\@%$top_srcdir%g; - $filedata =~ s%\@INSTALL\@%$INSTALL%g; - - if ($bad_perl) { - while ($i <= $#comp_subs) { - my $ref = $comp_subs[$i]; - &$ref(\$filedata); - $i++; - } - } else { - while ($i <= $#comp_match) { - $filedata =~ s/$comp_match[$i]/$comp_subs[$i]/g; - $i++; - } - } - open(CF, "> $outf") || die "can't create $outf: $!"; - print CF $filedata; - close(CF); -} - -sub make_closure { - my ($pat, $sub) = @_; - my $ret = eval "return sub { my \$ref=shift; \$\$ref =~ s%\Q$pat\E%\Q$sub\E%g; }"; - if ($@) { - print "can't create CODE: $@\n"; - } - return $ret; -} diff --git a/admin/config.sub b/admin/config.sub deleted file mode 100755 index 2ef2842..0000000 --- a/admin/config.sub +++ /dev/null @@ -1,1575 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. - -timestamp='2005-07-01' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ - kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | ms1 \ - | msp430 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b \ - | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m32c) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | ms1-* \ - | msp430-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa-* \ - | ymp-* \ - | z8k-*) - ;; - m32c-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16c) - basic_machine=cr16c-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* | -skyos*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/admin/configure.in.bot.end b/admin/configure.in.bot.end deleted file mode 100644 index 1bc030b..0000000 --- a/admin/configure.in.bot.end +++ /dev/null @@ -1,45 +0,0 @@ -# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure -if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then - # And if so, warn when they don't match - if test "$kde_libs_prefix" != "$given_prefix"; then - # And if kde doesn't know about the prefix yet - echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null - if test $? -ne 0; then - echo "" - echo "Warning: you chose to install this package in $given_prefix," - echo "but KDE was found in $kde_libs_prefix." - echo "For this to work, you will need to tell KDE about the new prefix, by ensuring" - echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix" - echo "Then restart KDE." - echo "" - fi - fi -fi - -if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then - echo "" - echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility" - echo "was not included. Therefore, GCC symbol visibility support remains disabled." - echo "" - echo "For better performance, consider including the Qt visibility supporting patch" - echo "located at:" - echo "" - echo "http://bugs.kde.org/show_bug.cgi?id=109386" - echo "" - echo "and recompile all of Qt and KDE. Note, this is entirely optional and" - echo "everything will continue to work just fine without it." - echo "" -fi - -if test "$all_tests" = "bad"; then - if test ! "$cache_file" = "/dev/null"; then - echo "" - echo "Please remove the file $cache_file after changing your setup" - echo "so that configure will find the changes next time." - echo "" - fi -else - echo "" - echo "Good - your configure finished. Start make now" - echo "" -fi diff --git a/admin/configure.in.min b/admin/configure.in.min deleted file mode 100644 index 0dfe378..0000000 --- a/admin/configure.in.min +++ /dev/null @@ -1,57 +0,0 @@ -dnl This file is part of the KDE libraries/packages -dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org) - -dnl This file is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Library General Public -dnl License as published by the Free Software Foundation; either -dnl version 2 of the License, or (at your option) any later version. - -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Library General Public License for more details. - -dnl You should have received a copy of the GNU Library General Public License -dnl along with this library; see the file COPYING.LIB. If not, write to -dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -dnl Boston, MA 02110-1301, USA. - -# Original Author was Kalle@kde.org -# I lifted it in some mater. (Stephan Kulow) -# I used much code from Janos Farkas - -dnl Process this file with autoconf to produce a configure script. - -AC_INIT(acinclude.m4) dnl a source file from your sub dir - -dnl This is so we can use kde-common -AC_CONFIG_AUX_DIR(admin) - -dnl This ksh/zsh feature conflicts with `cd blah ; pwd` -unset CDPATH - -dnl Checking host/target/build systems, for make, install etc. -AC_CANONICAL_SYSTEM -dnl Perform program name transformation -AC_ARG_PROGRAM - -dnl Automake doc recommends to do this only here. (Janos) -AM_INIT_AUTOMAKE(@MODULENAME@, @VERSION@) dnl searches for some needed programs - -KDE_SET_PREFIX - -dnl generate the config header -AM_CONFIG_HEADER(config.h) dnl at the distribution this done - -dnl Checks for programs. -AC_CHECK_COMPILERS -AC_ENABLE_SHARED(yes) -AC_ENABLE_STATIC(no) -KDE_PROG_LIBTOOL - -dnl for NLS support. Call them in this order! -dnl WITH_NLS is for the po files -AM_KDE_WITH_NLS - -dnl KDE_USE_QT -AC_PATH_KDE diff --git a/admin/cvs.sh b/admin/cvs.sh deleted file mode 100644 index 6bb1e60..0000000 --- a/admin/cvs.sh +++ /dev/null @@ -1,661 +0,0 @@ -#! /bin/sh -# -# cvs.sh -# -# This file contains support code from Makefile.common -# It defines a shell function for each known target -# and then does a case to call the correct function. - -unset MAKEFLAGS - -call_and_fix_autoconf() -{ - $AUTOCONF || exit 1 - if test -r configure.in.in ; then - perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ - \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ - \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ - \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ - \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/; s,^#line.*LINENO.*\$,/* \$& */, ;" configure - fi -} - -strip_makefile() -{ - if test ! -f $makefile_wo; then - perl -e '$in=0; while ( <> ) { $in = 1 if ($_ =~ m/^if / ); print $_ unless ($in || $_ =~ m/^include /); $in = 0 if ($_ =~ m/^endif/); }' < $makefile_am > $makefile_wo - fi -} - -check_autotool_versions() -{ -required_autoconf_version="2.53 or newer" -AUTOCONF_VERSION=`$AUTOCONF --version | head -n 1` -case $AUTOCONF_VERSION in - Autoconf*2.5* | autoconf*2.5* | autoconf*2.6* ) : ;; - "" ) - echo "*** AUTOCONF NOT FOUND!." - echo "*** KDE requires autoconf $required_autoconf_version" - exit 1 - ;; - * ) - echo "*** YOU'RE USING $AUTOCONF_VERSION." - echo "*** KDE requires autoconf $required_autoconf_version" - exit 1 - ;; -esac - -AUTOHEADER_VERSION=`$AUTOHEADER --version | head -n 1` -case $AUTOHEADER_VERSION in - Autoconf*2.5* | autoheader*2.5* | autoheader*2.6* ) : ;; - "" ) - echo "*** AUTOHEADER NOT FOUND!." - echo "*** KDE requires autoheader $required_autoconf_version" - exit 1 - ;; - * ) - echo "*** YOU'RE USING $AUTOHEADER_VERSION." - echo "*** KDE requires autoheader $required_autoconf_version" - exit 1 - ;; -esac - -AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` -required_automake_version="1.6.1 or newer" -case $AUTOMAKE_STRING in - automake*1.5d* | automake*1.5* | automake*1.5-* ) - echo "*** YOU'RE USING $AUTOMAKE_STRING." - echo "*** KDE requires automake $required_automake_version" - exit 1 - ;; - automake*1.6.* | automake*1.7* | automake*1.8* | automake*1.9* | automake*1.10*) - echo "*** $AUTOMAKE_STRING found." - UNSERMAKE=no - ;; - "" ) - echo "*** AUTOMAKE NOT FOUND!." - echo "*** KDE requires automake $required_automake_version" - exit 1 - ;; - *unsermake* ) : - echo "*** YOU'RE USING UNSERMAKE." - echo "*** GOOD LUCK!! :)" - UNSERMAKE=unsermake - ;; - * ) - echo "*** YOU'RE USING $AUTOMAKE_STRING." - echo "*** KDE requires automake $required_automake_version" - exit 1 - ;; -esac -unset required_automake_version -} - -cvs() -{ -check_autotool_versions -acinclude_m4 - -### Make new subdirs and configure.in. -### The make calls could be optimized away here, -### with a little thought. -if test -r configure.in.in; then - rm -f configure.in - echo "*** Creating list of subdirectories" - create_subdirs - - if test -r Makefile.am.in; then - echo "*** Creating Makefile.am" - if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 - else - Makefile_am - fi - fi - configure_files - echo "*** Creating configure.in" - if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 - else - configure_in - fi -fi - -echo "*** Creating aclocal.m4" -$ACLOCAL $ACLOCALFLAGS || exit 1 -echo "*** Creating configure" -call_and_fix_autoconf - -if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then - echo "*** Creating config.h template" - $AUTOHEADER || exit 1 - touch config.h.in -fi - -echo "*** Creating Makefile templates" -$AUTOMAKE || exit 1 - -if test "$UNSERMAKE" = no; then - echo "*** Postprocessing Makefile templates" - perl -w admin/am_edit || exit 1 -fi - -if egrep "^cvs-local:" $makefile_am >/dev/null; then \ - strip_makefile - $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 -fi - -echo "*** Creating date/time stamp" -touch stamp-h.in - -echo "*** Finished" -echo " Don't forget to run ./configure" -echo " If you haven't done so in a while, run ./configure --help" -} - -dist() -{ -check_autotool_versions - -### -### First build all of the files necessary to do just "make" -### -acinclude_m4 -if test -r configure.in.in; then - rm -f configure.in - create_subdirs - - if test -r Makefile.am.in; then - if grep '\$(top_srcdir)/Makefile.am:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./Makefile.am || exit 1 - else - Makefile_am - fi - fi - configure_files - if grep '\$(top_srcdir)/configure.in:' $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 - else - configure_in - fi -fi -$ACLOCAL $ACLOCALFLAGS -if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then - echo "*** Creating config.h template" - $AUTOHEADER || exit 1 - touch config.h.in -fi -$AUTOMAKE --foreign || exit 1 -if test "$UNSERMAKE" = no; then - echo "*** Postprocessing Makefile templates" - perl -w admin/am_edit || exit 1 -fi -call_and_fix_autoconf -touch stamp-h.in -if grep "^cvs-local:" $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo cvs-local top_srcdir=. -fi - -### -### Then make messages -### -if test -d po; then - LIST=`find ./po -name "*.po"` - for i in $LIST; do - file2=`echo $i | sed -e "s#\.po#\.gmo#"` - msgfmt -o $file2 $i || touch $file2 - done -fi -if grep "^cvs-dist-local:" $makefile_am >/dev/null; then - strip_makefile - $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. -fi -} - -subdir_dist() -{ -$ACLOCAL $ACLOCALFLAGS -$AUTOHEADER -touch config.h.in -$AUTOMAKE -AUTOMAKE_STRING=`$AUTOMAKE --version | head -n 1` -case $AUTOMAKE_STRING in - *unsermake* ) : - ;; - *) - perl -w ../admin/am_edit --path=../admin -esac -call_and_fix_autoconf -touch stamp-h.in -} - -configure_in() -{ -rm -f configure.in configure.in.new -kde_use_qt_param= -test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } -list=`fgrep -v "configure.in.bot" < configure.files | fgrep -v "configure.in.mid"` -: > configure.in.new -for file in $list; do - echo "dnl =======================================================" >> configure.in.new - echo "dnl FILE: $file" >> configure.in.new - echo "dnl =======================================================" >> configure.in.new - echo "" >> configure.in.new - cat $file >> configure.in.new -done -echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new -if test -f Makefile.am.in; then - subdirs=`cat subdirs` - for dir in $subdirs; do - vdir=`echo $dir | sed -e 's,[-+.@],_,g'` - echo "AM_CONDITIONAL($vdir""_SUBDIR_included, test \"x\$$vdir""_SUBDIR_included\" = xyes)" >> configure.in.new - if test -f "$dir/configure.in"; then - echo "if test \"x\$$vdir""_SUBDIR_included\" = xyes; then " >> configure.in.new - echo " AC_CONFIG_SUBDIRS($dir)" >> configure.in.new - echo "fi" >> configure.in.new - fi - done -fi - -echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new - -if test -f inst-apps; then - topleveldirs=`cat inst-apps` -else - topleveldirs= - for dir in `ls -1d * | sort`; do - if test "$dir" != "debian" && test -d $dir; then - topleveldirs="$topleveldirs $dir" - fi - done -fi - -for topleveldir in $topleveldirs; do - if test -f $topleveldir/configure.in; then - continue - fi - if test -f $topleveldir/Makefile.am; then :; else - continue - fi - - mfs=`find $topleveldir -follow -name Makefile.am -print | fgrep -v "/." | \ - sed -e 's#\./##; s#/Makefile.am$##' | sort | sed -e 's#$#/Makefile#'` - for i in $mfs; do - echo "AC_CONFIG_FILES([ $i ])" >> configure.in.new - done -done - -files=`cat configure.files` -list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` -for file in $list; do - echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new -done - -midfiles=`cat configure.files | fgrep "configure.in.mid"` -test -n "$midfiles" && cat $midfiles >> configure.in.new - -echo "AC_OUTPUT" >> configure.in.new -modulename= -if test -f configure.in.in; then - if head -n 2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then - kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` - fi - if head -n 2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then - line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` - if test -n "$line"; then - modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` - VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` - fi - sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ - configure.in.new > configure.in && mv configure.in configure.in.new - fi -fi -if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then - VERSION="\"3.5.7\"" -fi -if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then - modulename=`pwd`; - modulename=`basename $modulename` - esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` - modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` - -fi -if test -n "$kde_use_qt_param"; then - sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ - configure.in.new > configure.in && mv configure.in configure.in.new -fi -sed -e "s#@MODULENAME@#$modulename#" configure.in.new | - sed -e "s#@VERSION@#$VERSION#" > configure.in -botfiles=`cat configure.files | egrep "configure.in.bot"` -test -n "$botfiles" && cat $botfiles >> configure.in -cat $admindir/configure.in.bot.end >> configure.in -rm -f configure.in.new -} - -configure_files() -{ -echo "*** Creating configure.files" -admindir=NO -for i in . .. ../.. ../../..; do - if test -x $i/admin; then admindir=$i/admin; break; fi -done -rm -f configure.files -touch configure.files -if test -f configure.in.in && head -n 2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then - echo $admindir/configure.in.min >> configure.files -fi -test -f configure.in.in && echo configure.in.in >> configure.files -# we collect files in the subdirs and do some sorting tricks, so subsubdirs come after subdirs -if test -f inst-apps; then - inst=`cat inst-apps` - list="" - for i in $inst; do - list="$list `find $i/ -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ - sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"`" - done -else - list=`find . -follow -name "configure.in.in" -o -name "configure.in.bot" -o -name "configure.in.mid" | \ - sed -e "s,/configure,/aaaconfigure," | sort | sed -e "s,/aaaconfigure,/configure,"` -fi -for i in $list; do if test -f $i && test `dirname $i` != "." ; then - echo $i >> configure.files -fi; done -test -f configure.in.mid && echo configure.in.mid >> configure.files -test -f configure.in.bot && echo configure.in.bot >> configure.files -if test ! -s configure.files; then - echo "There are no files to build a configure. Please check your checkout." - exit 1 -fi -} - -create_subdirs() -{ -if grep '\$(top_srcdir)/subdirs:' $makefile_am >/dev/null; then - # as many modules contain rules to create subdirs without any - # dependencies make won't create it unless there is no file. - # so we check if that's a dummy rule or one that works - rm -f subdirs.cvs.sh.$$ - if test -f subdirs; then - mv subdirs subdirs.cvs.sh.$$ - fi - strip_makefile - $MAKE -f $makefile_wo top_srcdir=. ./subdirs || exit 1 - if test -f subdirs.cvs.sh.$$; then - if test -s subdirs; then - rm subdirs.cvs.sh.$$ - else - mv subdirs.cvs.sh.$$ subdirs - fi - fi -else - subdirs -fi -} - -subdirs() -{ -dirs= -idirs= -if test -f inst-apps; then - idirs=`cat inst-apps` -else - idirs=`ls -1 | sort` -fi - -compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` -compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` -for i in $idirs; do - if test -f $i/Makefile.am; then - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - fi -done - -: > ./_SUBDIRS - -for d in $compilefirst; do - echo $d >> ./_SUBDIRS -done - -(for d in $dirs; do - list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` - for s in $list; do - echo $s $d - done - list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -n 1` - for s in $list; do - echo $d $s - done - echo $d $d -done ) | tsort >> ./_SUBDIRS - -for d in $compilelast; do - echo $d >> ./_SUBDIRS -done - -if test -r subdirs && cmp -s subdirs _SUBDIRS; then - rm -f _SUBDIRS -fi -test -r _SUBDIRS && mv _SUBDIRS subdirs || true -} - -Makefile_am() -{ -if test -f Makefile.am.in; then - compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -n 1` - compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -n 1` - - idirs= - dirs= - if test -f inst-apps; then - idirs=`cat inst-apps` - else - idirs=`cat subdirs` - fi - for i in $idirs; do - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - done - - adds=`fgrep '$(top_srcdir)/acinclude.m4:' Makefile.am.in | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir)/,,g'` - if echo "$adds" | fgrep "*" >/dev/null ; then - adds=`ls -d -1 $adds 2>/dev/null` - fgrep -v '$(top_srcdir)/acinclude.m4:' Makefile.am.in > Makefile.am.in.adds - str='$(top_srcdir)/acinclude.m4:' - for add in $adds; do - str="$str \$(top_srcdir)/$add" - done - echo $str >> Makefile.am.in.adds - else - cat Makefile.am.in > Makefile.am.in.adds - fi - - cat Makefile.am.in.adds | \ - sed -e 's,^\s*\(COMPILE_BEFORE.*\),# \1,' | \ - sed -e 's,^\s*\(COMPILE_AFTER.*\),# \1,' > Makefile.am - echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am - rm Makefile.am.in.adds -fi -} - -acinclude_m4() -{ - echo "*** Creating acinclude.m4" - adds= - if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then - strip_makefile - rm -f acinclude.m4 - adds=`grep '\$(top_srcdir)/acinclude.m4:' $makefile_wo | sed -e 's,^[^:]*: *,,; s,\$(top_srcdir),.,g'` - if echo $adds | fgrep "*" >/dev/null ; then - adds=`ls -d -1 $adds 2>/dev/null` - else - $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 || exit 1 - fi - else - rm -f acinclude.m4 - fi - # if it wasn't created up to now, then we do it better - if test ! -f acinclude.m4; then - cat admin/acinclude.m4.in admin/libtool.m4.in admin/pkg.m4.in $adds > acinclude.m4 - fi -} - -package_merge() -{ -catalogs=$POFILES -for cat in $catalogs; do - msgmerge -o $cat.new $cat $PACKAGE.pot - if test -s $cat.new; then - grep -v "\"POT-Creation" $cat.new > $cat.new.2 - grep -v "\"POT-Creation" $cat >> $cat.new.1 - if diff $cat.new.1 $cat.new.2; then - rm $cat.new - else - mv $cat.new $cat - fi - rm -f $cat.new.1 $cat.new.2 - fi -done -} - -extract_messages() -{ -podir=${podir:-$PWD/po} -files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` -dirs=`for i in $files; do echo \`dirname $i\`; done` -tmpname="$PWD/messages.log" -if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi -if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi -export EXTRACTRC PREPARETIPS - -for subdir in $dirs; do - test -z "$VERBOSE" || echo "Making messages in $subdir" - (cd $subdir - if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then - $EXTRACTRC *.rc *.ui *.kcfg > rc.cpp - else - candidates=`ls -1 *.rc *.ui *.kcfg 2>/dev/null` - if test -n "$candidates"; then - echo "$subdir has *.rc, *.ui or *.kcfg files, but not correct messages line" - fi - fi - if find . -name \*.c\* -o -name \*.h\* | fgrep -v ".svn" | xargs fgrep -s -q KAboutData ; then - echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp - else echo " " > _translatorinfo.cpp - fi - perl -e '$mes=0; while () { next if (/^(if\s|else\s|endif)/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile - - kdepotpath=${includedir:-`kde-config --expandvars --install include`}/kde.pot - if ! test -f $kdepotpath; then - kdepotpath=`kde-config --expandvars --prefix`/include/kde.pot - fi - - $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" srcdir=. \ - XGETTEXT="${XGETTEXT:-xgettext} --foreign-user -C -ci18n -ki18n -ktr2i18n -kI18N_NOOP -kI18N_NOOP2 -kaliasLocale -x $kdepotpath" messages - exit_code=$? - if test "$exit_code" != 0; then - echo "make exit code: $exit_code" - fi - ) 2>&1 | grep -v '^make\[1\]' > $tmpname - test -s $tmpname && { echo $subdir ; cat "$tmpname"; } - test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp - rm -f $subdir/_translatorinfo.cpp - rm -f $subdir/_transMakefile -done -rm -f $tmpname -} - -package_messages() -{ -rm -rf po.backup -mkdir po.backup - -for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do - egrep -v '^#[^,]' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i - cat po/$i > po.backup/backup_$i - touch -r po/$i po.backup/backup_$i - rm po/$i -done - -extract_messages - -for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do - test -f po/$i || echo "disappeared: $i" -done -for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do - sed -e 's,^"Content-Type: text/plain; charset=CHARSET\\n"$,"Content-Type: text/plain; charset=UTF-8\\n",' po/$i > po/$i.new && mv po/$i.new po/$i - #msgmerge -q -o po/$i po/$i po/$i - egrep -v '^#[^,]' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot - if test -f po.backup/$i && ! cmp -s temp.pot po.backup/$i; then - echo "will update $i" - else - if test -f po.backup/backup_$i; then - test -z "$VERBOSE" || echo "I'm restoring $i" - mv po.backup/backup_$i po/$i - rm po.backup/$i - else - echo "will add $i" - fi - fi -done -rm -f temp.pot -rm -rf po.backup -} - -# Make sure that sorting is always done the same way -LC_ALL=C -export LC_ALL -unset LANG || : -unset LC_CTYPE || : -unset LANGUAGE || : - -unset CDPATH || : -admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` -test "x$admindir" = "x$0" && admindir=. - -test "x$MAKE" = x && MAKE=make -makefile_am=Makefile.am -makefile_wo=Makefile.am.wo -if test -f Makefile.am.in; then - makefile_am=Makefile.am.in - makefile_wo=Makefile.am.in.wo - rm -f $makefile_wo -fi - -# Call script to find autoconf and friends. Uses eval since the script outputs -# sh-compatible code. -eval `$admindir/detect-autoconf.pl` - -### -### Main -### - -arg=`echo $1 | tr .- __` -case $arg in - cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ - cvs_clean | package_merge | package_messages | Makefile_am | acinclude_m4 | extract_messages ) $arg ;; - configure ) call_and_fix_autoconf ;; - * ) echo "Usage: cvs.sh " - echo "Target can be one of:" - echo " cvs svn dist" - echo " configure.in configure.files" - echo " package-merge package-messages" - echo "" - echo "Usage: anything but $1" - exit 1 ;; -esac - -if test -f $makefile_wo; then - rm $makefile_wo -fi - -exit 0 diff --git a/admin/debianrules b/admin/debianrules deleted file mode 100755 index 25897f2..0000000 --- a/admin/debianrules +++ /dev/null @@ -1,43 +0,0 @@ -#!/usr/bin/perl -w - -use Shell qw(mv cp mkdir rm) ; -use File::Find; -use Cwd; - -$origPwd = `pwd`; -chomp $origPwd; - -$kde_prefix = "/usr"; -$sysconfdir = "/etc"; -$kde_includedir = "$kde_prefix/include/kde"; -$infodir = "$kde_prefix/share/info"; -$mandir = "$kde_prefix/share/man"; -$qtdir = "/usr/share/qt3"; - -$kde_cgidir = "$kde_prefix/lib/cgi-bin"; -$kde_confdir = "$sysconfdir/kde3"; -$kde_htmldir = "$kde_prefix/share/doc/kde/HTML"; - -if (defined $ENV{DEB_BUILD_OPTIONS} && - $ENV{DEB_BUILD_OPTIONS} =~ /\bnostrip\b/) { - $enable_debug="--enable-debug=full"; -} else { - $enable_debug="--disable-debug"; -} - -if (@ARGV && $ARGV[0] eq 'echodirs') { - print STDOUT "export kde_prefix=$kde_prefix\n"; - print STDOUT "export sysconfdir=$sysconfdir\n"; - print STDOUT "export kde_includedir=$kde_includedir\n"; - print STDOUT "export infodir=$infodir\n"; - print STDOUT "export mandir=$mandir\n"; - print STDOUT "export qtdir=$qtdir\n"; - - print STDOUT "export kde_cgidir=$kde_cgidir\n"; - print STDOUT "export kde_confdir=$kde_confdir\n"; - print STDOUT "export kde_htmldir=$kde_htmldir\n"; - - print STDOUT "configkde=$enable_debug --disable-rpath --prefix=\$(kde_prefix) --sysconfdir=\$(sysconfdir) --includedir=\$(kde_includedir) --infodir=\$(infodir) --mandir=\$(mandir) --with-qt-dir=\$(qtdir)\n"; - - exit -} diff --git a/admin/depcomp b/admin/depcomp deleted file mode 100755 index 04701da..0000000 --- a/admin/depcomp +++ /dev/null @@ -1,530 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2005-07-09.11 - -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" - if test "$libtool" = yes; then - "$@" -Wc,-M - else - "$@" -M - fi - stat=$? - - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - - if test -f "$tmpdepfile"; then - outname="$stripped.o" - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no - for arg in "$@"; do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - "$@" || exit $? - IFS=" " - for arg - do - case "$arg" in - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/admin/deps.am b/admin/deps.am deleted file mode 100644 index e8f5015..0000000 --- a/admin/deps.am +++ /dev/null @@ -1,19 +0,0 @@ -$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in $(top_srcdir)/admin/cvs.sh $(top_srcdir)/admin/pkg.m4.in - @cd $(top_srcdir) && $(SHELL) admin/cvs.sh acinclude_m4 - -$(top_srcdir)/configure.in: $(top_srcdir)/subdirs $(top_srcdir)/configure.files $(top_srcdir)/admin/cvs.sh - @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure_in - -$(top_srcdir)/configure.files: $(top_srcdir)/subdirs $(CONF_FILES) - @cd $(top_srcdir) && $(SHELL) admin/cvs.sh configure.files $(top_srcdir)/admin/cvs.sh - -$(top_srcdir)/Makefile.am: $(top_srcdir)/Makefile.am.in $(top_srcdir)/subdirs $(top_srcdir)/admin/cvs.sh - @cd $(top_srcdir) && $(SHELL) admin/cvs.sh Makefile_am - -$(top_srcdir)/subdirs: $(top_srcdir)/Makefile.am.in $(top_srcdir)/admin/cvs.sh - @cd $(top_srcdir) && $(SHELL) admin/cvs.sh subdirs - -# defining default rules for files that may not be present -$(top_srcdir)/Makefile.am.in: -$(CONF_FILES): - diff --git a/admin/detect-autoconf.pl b/admin/detect-autoconf.pl deleted file mode 100755 index 1cddc02..0000000 --- a/admin/detect-autoconf.pl +++ /dev/null @@ -1,175 +0,0 @@ -#!/usr/bin/env perl - -# Try to locate best version of auto* -# By Michael Pyne -# -# Copyright (c) 2005. -# This code is public domain. You may use it however you like (including -# relicensing). - -# Emulate the 'which' program. -sub which -{ - my $prog = shift; - my @paths = split(/:/, $ENV{'PATH'}); - - for $path (@paths) - { - return "$path/$prog" if -x "$path/$prog"; - } - - return ""; -} - -# Subroutine to determine the highest installed version of the given program, -# searching from the given paths. -sub findBest -{ - my ($program, @paths) = @_; - my $best_version_found = '0'; # Deliberately a string. - my %versions; - my %minimumVersions = ( - 'autoconf' => '2.5', - 'automake' => '1.6', - ); - - # Allow user to use environment variable to override search. - return $ENV{uc $program} if $ENV{uc $program}; - - for $prefix (@paths) - { - @files = glob "$prefix/$program*"; - for $file (@files) - { - # Don't check non-executable scripts. - next unless -x $file; - - ($version) = $file =~ /$prefix\/$program-?(.*)$/; - $version =~ s/-|\.//g; - # Don't check the -wrapper ones - next if $version eq "wrapper"; - - # Special case some programs to make sure it has a minimum version. - if (not $version and exists $minimumVersions{$program}) - { - my $min_version = $minimumVersions{$program}; - my $versionOutput = `$program --version 2>/dev/null | head -n 1`; - - # If we can't run the script to get the version it likely won't work later. - next unless $versionOutput; - - # Use number.number for version (we don't need the excess in general). - ($versionOutput) = ($versionOutput =~ /(\d\.\d)/); - - # Use lt to do lexicographical comparison of strings (which should be - # equivalent and doesn't involve issues with floating point conversions). - if (not $versionOutput or $versionOutput lt $min_version) - { - next; - } - } - - # If no version suffix then use it in favor of a versioned autotool - # since the ever-popular WANT_AUTOFOO should then work (in theory). - return $file unless $version; - - # Emulate 'which', and abort if we've already seen this version. - next if exists $versions{$version}; - - # Save filename of program. - $versions{$version} = $file; - - # Use string comparison so that e.g. 253a will be > 253 but < 254. - if ($version gt $best_version_found) - { - $best_version_found = $version; - } - } - } - - return $versions{$best_version_found}; -} - -# Find an appropriate "which" program for later use by the shell script calling -# us. -sub findWhich -{ - for $candidate ('type -p', 'which', 'type') - { - $test = `$candidate sh 2>/dev/null`; - chomp $test; - - return $candidate if -x $test; - } -} - -# Uses which() to find a program unless the user provided its path in the -# environment (the upper case program name is searched). -sub findProgram -{ - $suffix = ""; # For use if @_ has only one param. - my ($program, $suffix) = @_; - - return $ENV{uc $program} if $ENV{uc $program}; - return which("$program$suffix"); -} - -# SCRIPT STARTS. - -# Search in path. -@paths = split(/:/, $ENV{'PATH'}); - -# Make sure at least /usr/bin and /usr/local/bin are in this search. -unshift @paths, '/usr/local/bin' unless grep $_ eq '/usr/local/bin', @paths; -unshift @paths, '/usr/bin' unless grep $_ eq '/usr/bin', @paths; - -$autoconf = findBest('autoconf', @paths); -($autoconf_suffix) = $autoconf =~ /.*autoconf(.*)$/; - -# Find matching autoconf companions. -$autoheader = findProgram('autoheader', $autoconf_suffix); -$autom4te = findProgram('autom4te', $autoconf_suffix); - -# Get best automake, and look for unsermake to possibly override it. -$automake = findBest('automake', @paths); -$unsermake = ""; -# backward compatible: if $UNSERMAKE points to a path, use it -$unsermake = findProgram('unsermake') if (defined($ENV{'UNSERMAKE'}) and $ENV{'UNSERMAKE'} =~ /\//); -# new compatible: if it says 'yes', use the one from path -$unsermake = which('unsermake') if ($ENV{'UNSERMAKE'} ne 'no'); - -($automake_suffix) = $automake =~ /.*automake(.*)$/; - -# Use unsermake if we found it. -$automake = "$unsermake -c" if $unsermake; - -# Find matching automake companions. -$aclocal = findProgram('aclocal', $automake_suffix); - -$which = findWhich(); - -# Make sure we have all of the needed programs. -for $i (qw'autoconf autoheader autom4te automake aclocal') -{ - unless(${$i}) - { - print "# Unable to find $i!!\n"; - exit 1; - } -} - -# Print results in eval-able form. -print < []" - exit 2 - ;; -x--doxdatadir=* ) - DOXDATA=`echo $1 | sed -e 's+--doxdatadir=++'` - ;; -x--installdir=*) - PREFIX=`echo $1 | sed -e 's+--installdir=++'` - ;; -x--* ) - echo "Unknown option: $1" - exit 1 - ;; -* ) - top_srcdir="$1" - break - ;; -esac -shift -done - - -### Sanity check the mandatory "top srcdir" argument. -if test -z "$top_srcdir" ; then - echo "Usage: doxygen.sh " - exit 1 -fi -if test ! -d "$top_srcdir" ; then - echo "top_srcdir ($top_srcdir) is not a directory." - exit 1 -fi - -### Normalize top_srcdir so it is an absolute path. -if expr "x$top_srcdir" : "x/" > /dev/null ; then - # top_srcdir is absolute already - : -else - top_srcdir=`cd "$top_srcdir" 2> /dev/null && pwd` - if test ! -d "$top_srcdir" ; then - echo "top_srcdir ($top_srcdir) is not a directory." - exit 1 - fi -fi - - - -### Sanity check and guess QTDOCDIR. -if test -z "$QTDOCDIR" ; then - if test -z "$QTDIR" ; then - for i in /usr/X11R6/share/doc/qt/html - do - QTDOCDIR="$i" - test -d "$QTDOCDIR" && break - done - else - for i in share/doc/qt/html doc/html - do - QTDOCDIR="$QTDIR/$i" - test -d "$QTDOCDIR" && break - done - fi -fi -if test -z "$QTDOCDIR" || test ! -d "$QTDOCDIR" ; then - if test -z "$QTDOCDIR" ; then - echo "* QTDOCDIR could not be guessed." - else - echo "* QTDOCDIR does not name a directory." - fi - if test -z "$QTDOCTAG" ; then - echo "* QTDOCDIR set to \"\"" - QTDOCDIR="" - else - echo "* But I'll use $QTDOCDIR anyway because of QTDOCTAG." - fi -fi - -### Get the "top srcdir", also its name, and handle the case that subdir "." -### is given (which would be top_srcdir then, so it's equal to none-given -### but no recursion either). -### -# top_srcdir="$1" # Already set by options processing -module_name=`basename "$top_srcdir"` -subdir="$2" -if test "x." = "x$subdir" ; then - subdir="" - if test "x$recurse_given" = "xNO" ; then - recurse=0 - fi -fi -if test "x" != "x$subdir" ; then - # If no recurse option given explicitly, default to - # no recurse when processing subdirs given on the command-line. - if test "x$recurse_given" = "xNO" ; then - recurse=0 - fi -fi - -if test -z "$DOXDATA" || test ! -d "$DOXDATA" ; then - if test -n "$DOXDATA" ; then - echo "* \$DOXDATA is '$DOXDATA' which does not name a directory" - fi - DOXDATA="$top_srcdir/doc/common" -fi - -if test ! -d "$DOXDATA" ; then - echo "* \$DOXDATA does not name a directory ( or is unset ), tried \"$DOXDATA\"" - exit 1 -fi - -if test -n "$PREFIX" && test ! -d "$PREFIX" ; then - echo "* \$PREFIX does not name a directory, tried \"$PREFIX\"" - echo "* \$PREFIX is disabled." - PREFIX="" -fi - -### We need some values from top-level files, which -### are not preserved between invocations of this -### script, so factor it out for easy use. -create_doxyfile_in() -{ - eval `grep 'VERSION="' "$top_srcdir/admin/cvs.sh"` - echo "PROJECT_NUMBER = $VERSION" > Doxyfile.in - grep '^KDE_INIT_DOXYGEN' "$top_srcdir/configure.in.in" | \ - sed -e 's+[^[]*\[\([^]]*\)+PROJECT_NAME = "\1"+' \ - -e 's+].*++' >> Doxyfile.in -} - -apidoxdir="$module_name"-apidocs -test "x$use_modulename" = "x0" && apidoxdir="apidocs" - -### If we're making the top subdir, create the structure -### for the apidox and initialize it. Otherwise, just use the -### structure assumed to be there. -if test -z "$subdir" ; then - if test ! -d "$apidoxdir" ; then - mkdir "$apidoxdir" > /dev/null 2>&1 - fi - cd "$apidoxdir" > /dev/null 2>&1 || { - echo "Cannot create and cd into $apidoxdir" - exit 1 - } - - test -f "Doxyfile.in" || create_doxyfile_in - - # Copy in logos and the like - for i in "favicon.ico" "kde_gear_64.png" - do - cp "$DOXDATA/$i" . > /dev/null 2> /dev/null - done - for i in "$top_srcdir/doc/api/Dox-"*.png - do - T=`basename "$i" | sed -e 's+Dox-++'` - test -f "$i" && cp "$i" "./$T" > /dev/null 2> /dev/null - done - - top_builddir="." - srcdir="$1" - subdir="." -else - cd "$apidoxdir" > /dev/null 2>&1 || { - echo "Cannot cd into $apidoxdir -- maybe you need to" - echo "build the top-level dox first." - exit 1 - } - - if test "x1" = "x$recurse" ; then - # OK, so --recurse was requested - if test ! -f "subdirs.top" ; then - echo "* No subdirs.top available in the $apidoxdir." - echo "* The --recurse option will be ignored." - recurse=0 - fi - fi -fi - -### Read a single line (TODO: support \ continuations) from the Makefile.am. -### Used to extract variable assignments from it. -extract_line() -{ - file="$2" ; test -z "$file" && file="$srcdir/Makefile.am" - pattern=`echo "$1" | tr + .` - grep "^$1" "$file" | \ - sed -e "s+$pattern.*=\s*++" -} - -### Handle the COMPILE_{FIRST,LAST,BEFORE,AFTER} part of Makefile.am -### in the toplevel. Copied from admin/cvs.sh. Licence presumed LGPL). -create_subdirs() -{ -echo "* Sorting top-level subdirs" -dirs= -idirs= -if test -f "$top_srcdir/inst-apps"; then - idirs=`cat "$top_srcdir/"inst-apps` -else - idirs=`cd "$top_srcdir" && ls -1 | sort` -fi - -compilefirst="" -compilelast="" -if test -f "$top_srcdir/"Makefile.am.in ; then - compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1` - compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' "$top_srcdir/"Makefile.am.in | head -n 1` -fi -for i in $idirs; do - if test -f "$top_srcdir/$i"/Makefile.am; then - case " $compilefirst $compilelast " in - *" $i "*) ;; - *) dirs="$dirs $i" - esac - fi -done - -: > ./_SUBDIRS - -for d in $compilefirst; do - echo $d >> ./_SUBDIRS -done - -(for d in $dirs; do - list="" - if test -f "$top_srcdir/"Makefile.am.in ; then - list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1` - fi - for s in $list; do - echo $s $d - done - list="" - if test -f "$top_srcdir/"Makefile.am.in ; then - list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" "$top_srcdir/"Makefile.am.in | head -n 1` - fi - for s in $list; do - echo $d $s - done - echo $d $d -done ) | tsort >> ./_SUBDIRS - -for d in $compilelast; do - echo $d >> ./_SUBDIRS -done - -test -r _SUBDIRS && mv _SUBDIRS subdirs.top || true -} - - -### Add HTML header, footer, CSS tags to Doxyfile. -### Assumes $subdir is set. Argument is a string -### to stick in front of the file if needed. -apidox_htmlfiles() -{ - dox_header="$top_srcdir/doc/api/$1header.html" - dox_footer="$top_srcdir/doc/api/$1footer.html" - dox_css="$top_srcdir/doc/api/doxygen.css" - test -f "$dox_header" || dox_header="$DOXDATA/$1header.html" - test -f "$dox_footer" || dox_footer="$DOXDATA/$1footer.html" - test -f "$dox_css" || dox_css="$DOXDATA/doxygen.css" - - echo "HTML_HEADER = $dox_header" >> "$subdir/Doxyfile" ; \ - echo "HTML_FOOTER = $dox_footer" >> "$subdir/Doxyfile" ; \ - echo "HTML_STYLESHEET = $dox_css" >> "$subdir/Doxyfile" -} - -apidox_specials() -{ - line=`extract_line DOXYGEN_PROJECTNAME "$1"` - test -n "$line" && echo "PROJECT_NAME = \"$line\"" >> "$2" -} - -apidox_local() -{ - for i in "$top_srcdir/doc/api/Doxyfile.local" - do - if test -f "$i" ; then - cat "$i" >> "$subdir/Doxyfile" - break - fi - done -} - -### Post-process HTML files by substituting in the menu files -# -# In non-top directories, both and -# are calculated and replaced. Top directories get an empty -# if any. -doxyndex() -{ - # Special case top-level to have an empty MENU. - if test "x$subdir" = "x." ; then - MENU="" - htmldir="." - htmltop="$top_builddir" # Just ., presumably - echo "* Post-processing top-level files" - else - MENU="
    " - htmldir="$subdir/html" - htmltop="$top_builddir.." # top_builddir ends with / - echo "* Post-processing files in $htmldir" - - # Build a little PHP file that maps class names to file - # names, for the quick-class-picker functionality. - # (The quick-class-picker is disabled due to styling - # problems in IE & FF). - ( - echo ",g" -e "s+_00+,+g" -e "s+_3+<+g" | tr "[A-Z]" "[a-z]"` - echo " \"$classname\" => \"$htmlfile\"," - done | sort ; \ - echo ") ?>" - ) > "$subdir/classmap.inc" - - # This is a list of pairs, with / separators so we can use - # basename and dirname (a crude shell hack) to split them - # into parts. For each, if the file part exists (as a html - # file) tack it onto the MENU variable as a
  • with link. - for i in "Main Page/index" \ - "Modules/modules" \ - "Namespace List/namespaces" \ - "Class Hierarchy/hierarchy" \ - "Alphabetical List/classes" \ - "Class List/annotated" \ - "File List/files" \ - "Directories/dirs" \ - "Namespace Members/namespacemembers" \ - "Class Members/functions" \ - "Related Pages/pages" - do - NAME=`dirname "$i"` - FILE=`basename "$i"` - test -f "$htmldir/$FILE.html" && MENU="$MENU
  • $NAME
    • " - done - - MENU="$MENU
" - fi - - - # Get the list of global Menu entries. - GMENU=`cat subdirs | tr -d '\n'` - - PMENU=`grep '++' | awk '{ c=split($0,a,"/"); for (j=1; j<=c; j++) { printf " / %s\n" , a[j]; } }' | tr -d '\n'` - - # Map the PHP file into HTML options so that - # it can be substituted in for the quick-class-picker. - CMENU="" - # For now, leave the CMENU disabled - CMENUBEGIN="" - - if test "x$subdir" = "x." ; then - # Disable CMENU on toplevel anyway - CMENUBEGIN="" - else - test -f "$subdir/classmap.inc" && \ - CMENU=`grep '=>' "$subdir/classmap.inc" | sed -e 's+"\([^"]*\)" => "'"$subdir/html/"'\([^"]*\)"+