tdebase/konsole/doc/More/vt100_setup.txt

From: sherwin@royalt.enet.dec.com (Jim Sherwin)
Newsgroups: comp.terminals
Subject: Re: VT100 (DEC) Setup Problem (online/offline)
Message-ID: <29245@nntpd.lkg.dec.com>
Date: 25 Oct 91 02:02:07 GMT
Organization: DEC -- Video, Image and Printer Systems Group
Lines: 63


	Striking the SET-UP key places you into SET-UP A mode.  SET-UP A is
	basically your tab stops.  Use the space bar to move along the ruler
	and strike the T key at the desired tab stop location.

	SET-UP B may only be entered from SET-UP A and is done be striking
	the 5 on the main keyboard (i.e. top-row).

	To exit SET-UP B strike the SET-UP key.

	The SET-UP parameters are as follows:


  	Bank	Position   Parameters
  
  	1	1	   Scroll;        0=jump;       1=smooth
  	1	2	   Autorepeat;    0=off;        1=on
  	1	3	   Screen;        0=dark;       1=light
  	1	4	   Cursor;        0=underline;  1=block
  
  	2	1	   Margin Bell;   0=off;        1=on
  	2	2	   Keyclick;      0=off;        1=on
  	2	3	   ANSI/VT52;     0=VT52;       1=ANSI
  	2	4	   Auto XON/XOFF; 0=off;        1=on
  
  	3	1	   Pound Sign;    0=octothorpe; 1=British Pound
  	3	2	   Wrap Around;   0=off;        1=on
  	3	3	   New Line;      0=off;        1=on
  	3	4	   Interlace;     0=off;        1=on
  
  	4	1	   Parity Sense;  0=odd;        1=even
  	4	2	   Parity;        0=off;        1=on
  	4	3	   Bits per Char; 0=7 bits;     1=8 bits
  	4	4	   Power;         0=60 Hz;      1=50 Hz

	While in SET-UP B mode, these features are set by positioning the
	cursor above the feature switch, using the spacebar, and striking
	the 6 key on the main keyboard.

	To set the ANSWERBACK MESSAGE, enter SET-UP B and strike the SHIFT
	and A keys simultaneously.  The terminal will respond with A = on
	the screen.  Type a message delimiter character which may be any
	chaacter not used in the actual message.  Type the ANSWERBACK
	MESSAGE, up to 20 characters.  Type the message delimiter
	character.  The message will disappear from the screen.  You may
	not edit an ANSWERBACK MESSAGE.  You may only supercede it with a
	new ANSWERBACK MESSAGE.

	To save the SET-UP, strike the SHIFT and S keys simultaneously,
	while in SET-UP mode.

	I hope this helps.

	Jim


 <>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>
 <> "When things are going well,   \    Jim Sherwin a.k.a.                  <>
 <>  someone will inevitably        \   sherwin@royalt.enet.dec.com         <>
 <>  experiment detrimentally."      \  !decwrl!royalt.enet.dec.com!sherwin <>
 <>               Boyle's Second Law  \ sherwin%royalt.enet@decwrl.dec.com  <>
 <>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>-<>


Article 20936 of comp.dcom.modems:
Path: utkcs2!darwin.sura.net!jvnc.net!yale.edu!think.com!news.bbn.com!news.bbn.com!news
From: Paul Placeway <pplacewa@bbn.com>
Newsgroups: comp.dcom.modems,alt.bbs
Subject: Re: Detecting ANSI on a remote system
Date: 11 Jul 1992 00:04:09 GMT
Lines: 82
Message-ID: <l5s9bpINNqdt@news.bbn.com>
References: <1992Jul8.204233.13120@csusac.csus.edu> <1992Jul9.053233.11670@f109f.mil.se>
NNTP-Posting-Host: bbn.com
Xref: utkcs2 comp.dcom.modems:20936 alt.bbs:11447

nils@f109f.mil.se (Nils Hammar) writes:

< emamid@athena.ecs.csus.edu (David Emami) writes:


< >I am currently writing a communications app using TurboVision; I've got a
< >view that can display ANSI, but how do I let the system that I hook up with
< >that I can use ANSI codes. Most BBS's that I've tried respond with "ANSI
< >detected" or "ANSI not detected" when I login using a commercial term
< >program, based on the emulation I'm using. I presume that the BBS sends a
< >string which I need to respond to in a certain way; what should my program
< >be looking for, and how should it answer? Any help would be appreciated.

< What I have been using is the function that reports the cursor position.
< If you get an answer on that request that is correct, it's ANSI, or a VT100
< compatible terminal. To determine if it's a VT100 or similar, you will have
< to send a second request that's only recognized by the VT100 or
< similar terminals. That request will result in an answer that tells you
< almost everything that you need to know about the terminal.
< If this secondary request doesn't give you any response, then it's only
< ANSI. This is a really nice way to find out if you can send high resolution
< graphics to the caller too. What a surprise to get a hig resolution
< picture on the screen when you are calling an ordinary BBS!

The ANSI Device Status Report (DSR) is

	ESC [ <n> n

where <n> is 5 for a status report (OK reply is "ESC [ 0 n"), and 6
for report cursor position (reply is "ESC [ <row> ; <col> R").

ANSI (and DEC) Send Device Attributes is

	ESC [ <n> c

where <n> is a number, in ASCII 0-9, and usually is 0 for the request.

Here are a (small) selection of replies:

	what			reply			comments
	----			-----			-----------
	xterm			ESC[?1;2c		VT100 w/AVO
	MacKermit		ESC[?1;2c
	VT102			ESC[?6c
	VT320			ESC[63;1;2;8;9c

(These are from vttest, by Per Lindberg)

	vanilla VT100			ESC[?1;0c	no options
	VT100 with STP			ESC[?1;1c
	VT100 with AVO			ESC[?1;2c	could be a VT102
	VT100 with STP and AVO		ESC[?1;3c
	VT100 with GPO			ESC[?1;4c
	VT100 with STP and GPO		ESC[?1;5c
	VT100 with AVO and GPO		ESC[?1;6c
	VT100 with STP, AVO and GPO	ESC[?1;7c
	VT100 with PP and AVO		ESC[?1;11c
	VT100 with PP, GPO and AVO	ESC[?1;15c
	VT132 with AVO			ESC[?4;2c
	VT132 with AVO and STP		ESC[?4;3c
	VT132 with GPO and AVO		ESC[?4;6c
	VT132 with GPO, AVO, and STP	ESC[?4;7c
	VT132 with PP and AVO		ESC[?4;11c
	VT132 with PP, GPO and AVO	ESC[?4;15c
	VT131				ESC[?7c
	VT125				ESC[?12;5c   VT125 also has ROM version
	VT125 with AVO			ESC[?12;7c   number, so this won't work
	VK100 (GIGI)			ESC[?5;0c
	VK100 (GIGI)			ESC[?5c

	DXterm (DEC's version of xterm)	ESC[?63;1;3;4;6;8;9;15;16;29c

< For this reason, I once wrote a program that convert PCX pictures
< to DEC Sixel Graphics. It was interesting to view those pictures
< on the screen with MS-KERMIT (which supports Sixel Graphics in colour.)
< The only disadvantage was that Sixel graphics is bitmapped and slow.

This is cute, but one needs to be careful about assuming what a
terminal emulator will do based on what it claims to be.  There are a
lot of mediocre "emulations" out there.  This is partially because the
ANSI spec allows the terminal to do a lot of weird and unexpected
things, like embedding simple control characters in the middle of an
escape sequence.  ("foo ^H^[^H[^H4^HCbar" should render as "foo bar".
Yuck.)

		-- Paul Placeway <pplacewa@bbn.com>