You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-km/messages/tdepim/kpilot.po

5887 lines
148 KiB

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

# translation of kpilot.po to km
#
# Eng Vannak <evannak@khmeros.info>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: kpilot\n"
"POT-Creation-Date: 2008-07-08 01:23+0200\n"
"PO-Revision-Date: 2007-07-25 14:08+0700\n"
"Last-Translator: Eng Vannak <evannak@khmeros.info>\n"
"Language-Team: km <support@khmeros.info>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#: lib/pilotTodoEntry.cc:133
#, fuzzy
msgid "Completed"
msgstr "បាន​បញ្ចប់"
#: lib/pilotTodoEntry.cc:135
#, fuzzy
msgid "Not completed"
msgstr "មិន​បាន​បញ្ចប់"
#: lib/pilotTodoEntry.cc:143
#, fuzzy, c-format
msgid "Due date: %1"
msgstr "កាល​បរិច្ឆេទ ៖ %1"
#: lib/pilotTodoEntry.cc:151
#, fuzzy, c-format
msgid "Priority: %1"
msgstr "អាទិភាព ៖ %1"
#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
#, fuzzy
msgid "<b><em>Note:</em></b><br>"
msgstr "<b><em>ចំណាំ ៖</em></b><br>"
#: lib/pilotDateEntry.cc:277 lib/pilotTodoEntry.cc:158
#, fuzzy
msgid ""
"Note:\n"
msgstr ""
"ចំណាំ ៖\n"
#: lib/pilotMemo.cc:81
#, fuzzy
msgid ""
"<i>Title:</i> %1"
"<br>\n"
"<i>MemoText:</i>"
"<br>%2"
msgstr ""
"<i>ចំណង​ជើង ៖</i> %1"
"<br>\n"
"<i>អត្ថបទ​អនុស្សារណៈ ៖</i>"
"<br>%2"
#: lib/pilotMemo.cc:86
#, fuzzy
msgid ""
"Title: %1\n"
"MemoText:\n"
"%2"
msgstr ""
"ចំណង​ជើង ៖ %1\n"
"អត្ថបទ​អនុស្សារណៈ\n"
"%2"
#: kpilot/addressWidget.cc:393 lib/pilotMemo.cc:132
#, fuzzy
msgid "[unknown]"
msgstr "[មិន​ស្គាល់]"
#: lib/actionQueue.cc:136
msgid ""
"The connection to the handheld was lost. Synchronization cannot continue."
msgstr ""
#: lib/actions.cc:54
msgid ""
"KPilot %1 HotSync starting...\n"
msgstr ""
#: lib/actions.cc:56
msgid "Using encoding %1 on the handheld."
msgstr ""
#: lib/actions.cc:67
msgid "KPilot is busy and cannot process the HotSync right now."
msgstr ""
#: lib/actions.cc:114
msgid ""
"Testing.\n"
msgstr ""
#: lib/actions.cc:130
msgid "Syncing database %1..."
msgstr ""
#: kpilot/logFile.cc:97 lib/actions.cc:134
msgid "HotSync finished."
msgstr ""
#: lib/syncAction.cc:103
msgid "The conduit %1 could not be executed."
msgstr ""
#: kpilot/conduitConfigDialog.cc:398 kpilot/kpilot.cc:261 kpilot/kpilot.cc:263
#: kpilot/kpilot.cc:515 kpilot/kpilotConfigDialog.cc:242 lib/syncAction.cc:204
msgid "HotSync"
msgstr ""
#: lib/syncAction.cc:205
msgid "Full Synchronization"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 54
#: kpilot/kpilot.cc:566 lib/syncAction.cc:206 rc.cpp:1016
#, no-c-format
msgid "Copy PC to Handheld"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 59
#: kpilot/kpilot.cc:557 lib/syncAction.cc:207 rc.cpp:1019
#, no-c-format
msgid "Copy Handheld to PC"
msgstr ""
#: kpilot/conduitConfigDialog.cc:397 kpilot/kpilotConfigDialog.cc:328
#: lib/syncAction.cc:208
#, fuzzy
msgid "Backup"
msgstr "ព័ត៌មាន​បម្រុង"
#: lib/syncAction.cc:209
msgid "Restore From Backup"
msgstr ""
#: lib/syncAction.cc:220
#, fuzzy
msgid "Test Sync"
msgstr "ធ្វើ​សមកាលកម្ម"
#: lib/syncAction.cc:224
msgid "Local Sync"
msgstr ""
#: lib/syncAction.cc:316 lib/syncAction.cc:428
#, fuzzy
msgid "Question"
msgstr "សំណួរ"
#: lib/syncAction.cc:335 lib/syncAction.cc:448
#, fuzzy
msgid "&Do not ask again"
msgstr "កុំ​សួរ​ម្ដង​ទៀត"
#: lib/syncAction.cc:369 lib/syncAction.cc:481
#, fuzzy
msgid "Do not ask again"
msgstr "កុំ​សួរ​ម្តងទៀត"
#: lib/recordConduit.cc:69 lib/recordConduit.cc:289
msgid "Unable to open the %1 database on the handheld."
msgstr ""
#: lib/recordConduit.cc:295
#, c-format
msgid "Unable to open %1."
msgstr ""
#: lib/kpilotdevicelink.cc:148
msgid "Could not open device: %1 (will retry)"
msgstr ""
#: lib/kpilotdevicelink.cc:187
msgid "Trying to open device %1..."
msgstr ""
#: lib/kpilotdevicelink.cc:241
msgid "Already listening on that device"
msgstr ""
#: lib/kpilotdevicelink.cc:261
msgid "Cannot create socket for communicating with the Pilot (%1)"
msgstr ""
#: lib/kpilotdevicelink.cc:289
msgid "Cannot open Pilot port \"%1\". "
msgstr ""
#: lib/kpilotdevicelink.cc:391
msgid "Cannot listen on Pilot socket (%1)"
msgstr ""
#: lib/kpilotdevicelink.cc:411 lib/kpilotdevicelink.cc:426
msgid "Cannot accept Pilot (%1)"
msgstr ""
#: lib/kpilotdevicelink.cc:427
msgid "already connected"
msgstr ""
#: lib/kpilotdevicelink.cc:441
msgid "Unable to read system information from Pilot"
msgstr ""
#: lib/kpilotdevicelink.cc:478
msgid "Checking last PC..."
msgstr ""
#: lib/kpilotdevicelink.cc:487
msgid ""
"Could not read user information from the Pilot. Perhaps you have a password set "
"on the device?"
msgstr ""
#: lib/kpilotdevicelink.cc:670
msgid "The Pilot device is not configured yet."
msgstr ""
#: lib/kpilotdevicelink.cc:709
msgid "Pilot device %1 is not read-write."
msgstr ""
#: lib/kpilotdevicelink.cc:719
msgid ""
"Pilot device %1 does not exist. Probably it is a USB device and will appear "
"during a HotSync."
msgstr ""
#: lib/kpilotdevicelink.cc:765 lib/kpilotdevicelink.cc:774
msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
msgstr ""
#: lib/kpilotdevicelink.cc:846
msgid ""
"End of HotSync\n"
msgstr ""
#: lib/pilotDateEntry.cc:179
#, c-format
msgid "Start date: %1"
msgstr ""
#: lib/pilotDateEntry.cc:185
msgid "Whole-day event"
msgstr ""
#: lib/pilotDateEntry.cc:193
#, c-format
msgid "End date: %1"
msgstr ""
#: lib/pilotDateEntry.cc:200
msgid ""
"_: %1 is the duration, %2 is the time unit\n"
"Alarm: %1 %2 before event starts"
msgstr ""
#: lib/pilotDateEntry.cc:204
#, fuzzy
msgid "minutes"
msgstr "នាទី​"
#: lib/pilotDateEntry.cc:205
#, fuzzy
msgid "hours"
msgstr "ម៉ោង"
#: lib/pilotDateEntry.cc:206
#, fuzzy
msgid "days"
msgstr "ថ្ងៃ"
#: lib/pilotDateEntry.cc:216
msgid "Recurrence: every %1 %2"
msgstr ""
#: lib/pilotDateEntry.cc:222
#, fuzzy
msgid "day(s)"
msgstr "ថ្ងៃ"
#: lib/pilotDateEntry.cc:223
#, fuzzy
msgid "week(s)"
msgstr "សប្តាហ៍"
#: lib/pilotDateEntry.cc:225
#, fuzzy
msgid "month(s)"
msgstr "ខែ"
#: lib/pilotDateEntry.cc:226
#, fuzzy
msgid "year(s)"
msgstr "ឆ្នាំ"
#: lib/pilotDateEntry.cc:235
msgid "Repeats indefinitely"
msgstr ""
#: lib/pilotDateEntry.cc:240
#, c-format
msgid "Until %1"
msgstr ""
#: lib/pilotDateEntry.cc:244
msgid "Repeating on the i-th day of week j"
msgstr ""
#: lib/pilotDateEntry.cc:245
msgid "Repeating on the n-th day of the month"
msgstr ""
#: lib/pilotDateEntry.cc:263
msgid "Exceptions:"
msgstr ""
#: lib/plugin.cc:73
#, fuzzy
msgid "Unnamed"
msgstr "គ្មាន​ឈ្មោះ"
#: lib/plugin.cc:93
msgid ""
"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save the "
"changes before continuing?</qt>"
msgstr ""
#: lib/plugin.cc:105
msgid "%1 Conduit"
msgstr ""
#: lib/plugin.cc:144
msgid "Send questions and comments to tdepim-users@kde.org"
msgstr ""
#: lib/plugin.cc:194
msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
msgstr ""
#: lib/plugin.cc:198
msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
msgstr ""
#: lib/plugin.cc:202
msgid ""
"For trademark information, see the <a href=\"help:/kpilot/trademarks.html\">"
"KPilot User's Guide</a>."
msgstr ""
#: lib/plugin.cc:213
msgid "<b>Authors:</b> "
msgstr ""
#: lib/plugin.cc:234
msgid "<b>Credits:</b> "
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1527
#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:308
msgid "Handheld"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:438 lib/plugin.cc:309
msgid "PC"
msgstr ""
#: lib/plugin.cc:480
msgid "Large Changes Detected"
msgstr ""
#: lib/plugin.cc:482
msgid ""
"The %1 conduit has made a large number of changes to your %2. Do you want to "
"allow this change?\n"
"Details:\n"
"\t%3"
msgstr ""
#: lib/plugin.cc:536
#, c-format
msgid "Could not find conduit %1."
msgstr ""
#: lib/plugin.cc:559
#, c-format
msgid "Could not load conduit %1."
msgstr ""
#: lib/plugin.cc:571
msgid "Conduit %1 has wrong version (%2)."
msgstr ""
#: lib/plugin.cc:581
#, c-format
msgid "Could not initialize conduit %1."
msgstr ""
#: lib/plugin.cc:594 lib/plugin.cc:603
#, c-format
msgid "Could not create conduit %1."
msgstr ""
#: lib/plugin.cc:607
msgid "[Conduit %1]"
msgstr ""
#: lib/plugin.cc:749
msgid "Start: %1. End: %2. "
msgstr ""
#: lib/plugin.cc:751
msgid "%1 new. "
msgstr ""
#: lib/plugin.cc:752
msgid "%1 changed. "
msgstr ""
#: lib/plugin.cc:753
msgid "%1 deleted. "
msgstr ""
#: lib/plugin.cc:755
msgid "No changes made. "
msgstr ""
#: _translatorinfo.cpp:1
#, fuzzy
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "អេង វណ្ណៈ"
#: _translatorinfo.cpp:3
#, fuzzy
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "evannak@khmeros.info"
#: conduits/null/null-conduit.cc:63 conduits/null/null-factory.cc:63
#, fuzzy
msgid "Null"
msgstr "គ្មាន​សោះ"
#: conduits/null/null-factory.cc:65
msgid "Null Conduit for KPilot"
msgstr ""
#: conduits/null/null-factory.cc:67
msgid "Configures the Null Conduit for KPilot"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:56
#: conduits/abbrowserconduit/abbrowser-setup.cc:54
#: conduits/knotes/knotes-factory.cc:73 conduits/malconduit/mal-factory.cc:76
#: conduits/memofileconduit/memofile-factory.cc:69
#: conduits/notepadconduit/notepad-factory.cc:73
#: conduits/null/null-factory.cc:71 conduits/recordconduit/factory.cc:72
#: conduits/sysinfoconduit/sysinfo-setup.cc:101
#: conduits/timeconduit/time-setup.cc:54
#, fuzzy
msgid "Primary Author"
msgstr "អ្នក​និពន្ធ​​ចម្បង​"
#: conduits/null/null-conduit.cc:81
msgid "NULL conduit is programmed to fail."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:70
#: conduits/memofileconduit/memofile-factory.cc:61
msgid "Memofile"
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:101
msgid "Unable to open the memo databases on the handheld."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:109
msgid "Cannot initialize from pilot."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:116
msgid "Cannot initialize the memo files from disk."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:123
#, c-format
msgid " Syncing with %1."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:126
msgid " Copying Pilot to PC..."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:131
msgid " Copying PC to Pilot..."
msgstr ""
#: conduits/memofileconduit/memofile-conduit.cc:135
msgid " Doing regular sync..."
msgstr ""
#: conduits/memofileconduit/memofile-factory.cc:63
msgid "Memofile Conduit for KPilot"
msgstr ""
#: conduits/memofileconduit/memofile-factory.cc:65
msgid "Configures the Memofile Conduit for KPilot"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:52
msgid "HardwareInfo"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:53
msgid "UserInfo"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:54
msgid "MemoryInfo"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:55
msgid "StorageInfo"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:56
msgid "DatabaseList"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:57
msgid "RecordNumbers"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:58
msgid "SyncInfo"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:59
msgid "KDEVersion"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:60
msgid "PalmOSVersion"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:61
msgid "DebugInformation"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:95
msgid "KPilot System Information conduit"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-setup.cc:97
msgid ""
"Retrieves System, Hardware, and User Info from the Handheld and stores them to "
"a file."
msgstr ""
#: conduits/sysinfoconduit/sysinfo-conduit.cc:163
#: conduits/sysinfoconduit/sysinfo-setup.cc:112
#, fuzzy
msgid "System Information"
msgstr "ព័ត៌មាន​ប្រព័ន្ធ​"
#: conduits/docconduit/doc-conflictdialog.cc:161
#: conduits/sysinfoconduit/sysinfo-conduit.cc:207
#: conduits/sysinfoconduit/sysinfo-conduit.cc:404
#: conduits/sysinfoconduit/sysinfo-conduit.cc:405
#: conduits/sysinfoconduit/sysinfo-conduit.cc:406
#: conduits/sysinfoconduit/sysinfo-conduit.cc:407
#, fuzzy
msgid "unknown"
msgstr "មិន​ស្គាល់"
#: conduits/sysinfoconduit/sysinfo-conduit.cc:254
msgid "Password set"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-conduit.cc:258
msgid "No password set"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-conduit.cc:308
msgid "No Cards available via pilot-link"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-conduit.cc:463
msgid "No debug data"
msgstr ""
#: conduits/sysinfoconduit/sysinfo-conduit.cc:587
msgid "Unable to open output file, using %1 instead."
msgstr ""
#: conduits/notepadconduit/notepad-conduit.cc:79
#: conduits/sysinfoconduit/sysinfo-conduit.cc:591
#, fuzzy, c-format
msgid "Unable to open %1"
msgstr "មិន​អាច​បើក %1"
#: conduits/sysinfoconduit/sysinfo-conduit.cc:602
#, c-format
msgid "Handheld system information written to the file %1"
msgstr ""
#: conduits/malconduit/mal-conduit.cc:121 conduits/malconduit/mal-setup.cc:62
msgid "MAL"
msgstr ""
#: conduits/malconduit/mal-conduit.cc:193
msgid ""
"Skipping MAL sync, because last synchronization was not long enough ago."
msgstr ""
#: conduits/malconduit/mal-conduit.cc:202
msgid "MAL synchronization failed (no SyncInfo)."
msgstr ""
#: conduits/malconduit/mal-conduit.cc:217
msgid "No proxy server is set."
msgstr ""
#: conduits/malconduit/mal-conduit.cc:220
#, c-format
msgid "Using proxy server: %1"
msgstr ""
#: conduits/malconduit/mal-conduit.cc:259
msgid "No SOCKS proxy is set."
msgstr ""
#: conduits/malconduit/mal-conduit.cc:262
#, c-format
msgid "Using SOCKS proxy: %1"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:50
#: conduits/malconduit/mal-factory.cc:70
msgid "MAL Synchronization Conduit for KPilot"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:52
#: conduits/malconduit/mal-factory.cc:72
msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:58
#: conduits/malconduit/mal-factory.cc:78
msgid "Author of libmal and the JPilot AvantGo conduit"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:60
#: conduits/malconduit/mal-factory.cc:80
msgid "Author of syncmal"
msgstr ""
#: Documentation/ConduitProgrammingTutorial/mal-factory.cc:62
#: conduits/malconduit/mal-factory.cc:82
msgid "Authors of the malsync library (c) 1997-1999"
msgstr ""
#: conduits/knotes/knotes-factory.cc:67
msgid "KNotes Conduit for KPilot"
msgstr ""
#: conduits/knotes/knotes-factory.cc:69
msgid "Configures the KNotes Conduit for KPilot"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-setup.cc:61
#: conduits/knotes/knotes-factory.cc:77
msgid "UI"
msgstr ""
#: conduits/knotes/knotes-action.cc:232
msgid "Could not open MemoDB on the handheld."
msgstr ""
#: conduits/knotes/knotes-action.cc:272
#, c-format
msgid "Could not load the resource at: %1"
msgstr ""
#: conduits/knotes/knotes-action.cc:808
#, c-format
msgid ""
"_n: Added one new memo.\n"
"Added %n new memos."
msgstr ""
#: conduits/knotes/knotes-action.cc:814
#, c-format
msgid ""
"_n: Modified one memo.\n"
"Modified %n memos."
msgstr ""
#: conduits/knotes/knotes-action.cc:821
#, c-format
msgid ""
"_n: Deleted one memo.\n"
"Deleted %n memos."
msgstr ""
#: conduits/knotes/knotes-action.cc:827
#, c-format
msgid ""
"_n: Added one note to KNotes.\n"
"Added %n notes to KNotes."
msgstr ""
#: conduits/knotes/knotes-action.cc:833
#, c-format
msgid ""
"_n: Modified one note in KNotes.\n"
"Modified %n notes in KNotes."
msgstr ""
#: conduits/knotes/knotes-action.cc:839
#, c-format
msgid ""
"_n: Deleted one note from KNotes.\n"
"Deleted %n notes from KNotes."
msgstr ""
#: conduits/knotes/knotes-action.cc:844
msgid "No change to KNotes."
msgstr ""
#: conduits/knotes/knotes-setup.cc:59
#, fuzzy
msgid "KNotes"
msgstr "KNotes"
#: conduits/timeconduit/time-conduit.cc:57
#: conduits/timeconduit/time-setup.cc:68 kpilot/datebookWidget.cc:68
#, fuzzy
msgid "Time"
msgstr "ពេលវេលា"
#: conduits/timeconduit/time-conduit.cc:91
msgid "Setting the clock on the handheld"
msgstr ""
#: conduits/timeconduit/time-conduit.cc:108
msgid ""
"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the time "
"conduit..."
msgstr ""
#: conduits/timeconduit/time-setup.cc:48
msgid "Time Synchronization Conduit for KPilot"
msgstr ""
#: conduits/timeconduit/time-setup.cc:50
msgid "Synchronizes the Time on the Handheld and the PC"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-setup.cc:48
msgid "Abbrowser Conduit for KPilot"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-setup.cc:50
msgid "Configures the Abbrowser Conduit for KPilot"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-setup.cc:56
#: conduits/abbrowserconduit/abbrowser-setup.cc:59
#: conduits/docconduit/doc-factory.cc:68 conduits/popmail/setupDialog.cc:74
#: conduits/vcalconduit/todo-setup.cc:59 conduits/vcalconduit/todo-setup.cc:63
#: conduits/vcalconduit/vcal-setup.cc:50 conduits/vcalconduit/vcal-setup.cc:54
#: kpilot/kpilot.cc:1027 kpilot/pilotDaemon.cc:1323
#, fuzzy
msgid "Maintainer"
msgstr "អ្នក​ថែទាំ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:125
#: conduits/abbrowserconduit/abbrowser-setup.cc:71
#, fuzzy
msgid "Addressbook"
msgstr "សៀវភៅ​អាសយដ្ឋាន"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:291
#: conduits/vcalconduit/vcal-conduitbase.cc:298
msgid ""
"You chose to sync with the file \"%1\", which cannot be opened. Please make "
"sure to supply a valid file name in the conduit's configuration dialog. "
"Aborting the conduit."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:327
#: conduits/abbrowserconduit/abbrowser-conduit.cc:328
msgid "Unable to initialize and load the addressbook for the sync."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:340
#: conduits/abbrowserconduit/abbrowser-conduit.cc:341
msgid "Unable to lock addressbook for writing. Can't sync!"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:396
msgid ""
"An error occurred while uploading \"%1\". You can try to upload the temporary "
"local file \"%2\" manually"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:518
msgid "Unable to open the addressbook databases on the handheld."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:539
msgid "Unable to open the addressbook."
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1526
msgid "Item on PC"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1528
msgid "Last sync"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1549
msgid "Last name"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1550
msgid "First name"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1551
#, fuzzy
msgid "Organization"
msgstr "អង្គការ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1552
#, fuzzy
msgid "Title"
msgstr "ចំណងជើង"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1553
#, fuzzy
msgid "Note"
msgstr "ចំណាំ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1555
msgid "Custom 1"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1556
msgid "Custom 2"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1557
msgid "Custom 3"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1558
msgid "Custom 4"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1560
#, fuzzy
msgid "Work Phone"
msgstr "​ទូរស័ព្ទ​កន្លែង​ធ្វើការ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1561
#, fuzzy
msgid "Home Phone"
msgstr "ទូរស័ព្ទ​ផ្ទះ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1562
#, fuzzy
msgid "Mobile Phone"
msgstr "ទូរស័ព្ទ​ចល័ត"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1563
#, fuzzy
msgid "Fax"
msgstr "ទូរសារ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1564
#, fuzzy
msgid "Pager"
msgstr "ភេកយ័រ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1565
#, fuzzy
msgid "Other"
msgstr "ផ្សេងៗ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1566
#, fuzzy
msgid "Email"
msgstr "អ៊ីមែល"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1569
#, fuzzy
msgid "Address"
msgstr "អាសយដ្ឋាន"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1570
#, fuzzy
msgid "City"
msgstr "ទីក្រុង"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1571
#, fuzzy
msgid "Region"
msgstr "តំបន់"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1572
#, fuzzy
msgid "Postal code"
msgstr "កូដប្រៃសណីយ៍"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1573
#, fuzzy
msgid "Country"
msgstr "ប្រទេស"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1587 kpilot/listCat.cc:84
#, fuzzy
msgid "Category"
msgstr "ប្រភេទ"
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1752
msgid ""
"The following address entry was changed, but does no longer exist on the "
"handheld. Please resolve this conflict:"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1756
msgid ""
"The following address entry was changed, but does no longer exist on the PC. "
"Please resolve this conflict:"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1760
msgid ""
"The following address entry was changed on the handheld as well as on the PC "
"side. The changes could not be merged automatically, so please resolve the "
"conflict yourself:"
msgstr ""
#: conduits/abbrowserconduit/abbrowser-conduit.cc:1762
msgid "Address conflict"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog.cc:162
msgid ""
"_: Entries in the resolution dialog. First the name of the field, then the "
"entry from the Handheld or PC after the colon\n"
"%1: %2"
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog.cc:164
msgid ""
"_: Denoting newlines in Address entries. No need to translate\n"
" | "
msgstr ""
#: conduits/abbrowserconduit/resolutionDialog.cc:214
#: conduits/abbrowserconduit/resolutionDialog.cc:220
msgid "Delete entry"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:198
msgid "Unable to open text file %1 for reading."
msgstr ""
#: conduits/docconduit/DOC-converter.cc:383
msgid "Unable to open Database for writing"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:440
#, c-format
msgid "Unable to open palm doc database %1"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:510
msgid "No filename set for the conversion"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:515
msgid "Unable to open Database for reading"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:523
#, c-format
msgid "Unable to read database header for database %1."
msgstr ""
#: conduits/docconduit/DOC-converter.cc:543
#, c-format
msgid "Unable to open output file %1."
msgstr ""
#: conduits/docconduit/DOC-converter.cc:558
msgid "Could not read text record #%1 from Database %2"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:577
msgid "Could not read bookmark record #%1 from Database %2"
msgstr ""
#: conduits/docconduit/DOC-converter.cc:594
msgid "Unable to open file %1 for the bookmarks of %2."
msgstr ""
#: conduits/docconduit/doc-conduit.cc:84
msgid "DOC"
msgstr ""
#: conduits/docconduit/doc-conduit.cc:272
msgid "Searching for texts and databases to synchronize"
msgstr ""
#: conduits/docconduit/doc-conduit.cc:332
msgid "Database created."
msgstr ""
#: conduits/docconduit/doc-conduit.cc:380
msgid "Unable to install the locally created PalmDOC %1 to the handheld."
msgstr ""
#: conduits/docconduit/doc-conduit.cc:383
msgid "Conversion of PalmDOC \"%1\" failed."
msgstr ""
#: conduits/docconduit/doc-conduit.cc:391
#, c-format
msgid "Unable to open or create the database %1."
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 147
#: conduits/docconduit/doc-conduit.cc:625 rc.cpp:334 rc.cpp:706
#, no-c-format
msgid "Conflict Resolution"
msgstr ""
#: conduits/docconduit/doc-conduit.cc:630
msgid "Sync aborted by user."
msgstr ""
#: conduits/docconduit/doc-conduit.cc:668
msgid "Synchronizing text \"%1\""
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:176
#: conduits/docconduit/kpalmdoc_dlg.cc:212
#: conduits/docconduit/kpalmdoc_dlg.cc:325
#: conduits/docconduit/kpalmdoc_dlg.cc:350
msgid ""
"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
"<br>Use folder <em>%2</em> instead?</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:179
#: conduits/docconduit/kpalmdoc_dlg.cc:215
#: conduits/docconduit/kpalmdoc_dlg.cc:328
#: conduits/docconduit/kpalmdoc_dlg.cc:354
msgid "Use Folder"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:192
msgid ""
"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
"folder.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:201
msgid ""
"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
"directory.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:229
msgid ""
"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:252
#: conduits/docconduit/kpalmdoc_dlg.cc:390
msgid "The following texts were successfully converted:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:253
#: conduits/docconduit/kpalmdoc_dlg.cc:391
msgid "Conversion Successful"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:257
#: conduits/docconduit/kpalmdoc_dlg.cc:395
msgid "No text files were converted correctly"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:267
#: conduits/docconduit/kpalmdoc_dlg.cc:405
msgid "<qt>The file <em>%1</em> does not exist.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:283
#: conduits/docconduit/kpalmdoc_dlg.cc:413
msgid "Conversion of file %1 successful."
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:340
msgid ""
"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:367
msgid ""
"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:435
msgid "&Text folder:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:436
msgid "&PalmDOC folder:"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 66
#: conduits/docconduit/kpalmdoc_dlg.cc:440 rc.cpp:751
#, no-c-format
msgid "&Text file:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:441
msgid "&DOC file:"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:456
msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:457
#: conduits/docconduit/kpalmdoc_dlg.cc:502 kpilot/addressWidget.cc:698
#: kpilot/logWidget.cc:356
#, fuzzy
msgid "Overwrite"
msgstr "សរសេរ​ជាន់​លើ"
#: conduits/docconduit/kpalmdoc_dlg.cc:482
#: conduits/docconduit/kpalmdoc_dlg.cc:518
msgid "<qt>Error while converting the text %1.</qt>"
msgstr ""
#: conduits/docconduit/kpalmdoc_dlg.cc:501
msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
msgstr ""
#: conduits/docconduit/doc-factory.cc:63
msgid "Palm DOC Conduit for KPilot"
msgstr ""
#: conduits/docconduit/doc-factory.cc:64
msgid "Configures the DOC Conduit for KPilot"
msgstr ""
#: conduits/docconduit/doc-setup.cc:64
msgid "Palm DOC"
msgstr ""
#: conduits/docconduit/kpalmdoc.cpp:42
msgid "KPalmDOC"
msgstr ""
#: conduits/docconduit/kpalmdoc.cpp:45
#, fuzzy
msgid "Main Developer"
msgstr "អ្នក​អភិវឌ្ឍន៍​ចម្បង"
#: conduits/docconduit/kpalmdoc.cpp:47
msgid "Maintainer of KPilot"
msgstr ""
#: conduits/docconduit/kpalmdoc.cpp:54
msgid "PalmDOC Converter"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:53
msgid ""
"Here is a list of all text files and DOC databases the conduit found. The "
"conduit tried to determine the correct sync direction, but for databases in "
"bold red letters a conflict occurred (i.e. the text was changed both on the "
"desktop and on the handheld). For these databases please specify which version "
"is the current one."
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:57
msgid ""
"You can also change the sync direction for databases without a conflict."
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:61
msgid "DOC Databases"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:106
msgid "No Sync"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:107
msgid "Sync Handheld to PC"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:108
msgid "Sync PC to Handheld"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:109
msgid "Delete Both Databases"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:113
msgid "More Info..."
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:155
msgid "unchanged"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:156
msgid "new"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:157
msgid "changed"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:158
msgid "only bookmarks changed"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:159
msgid "deleted"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:160
msgid "does not exist"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:171
msgid ""
"Status of the database %1:\n"
"\n"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:172
msgid ""
"Handheld: %1\n"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:173
msgid ""
"Desktop: %1\n"
msgstr ""
#: conduits/docconduit/doc-conflictdialog.cc:175
msgid "Database information"
msgstr ""
#: conduits/notepadconduit/notepad-conduit.cc:59
#: conduits/notepadconduit/notepad-factory.cc:89
msgid "Notepad"
msgstr ""
#: conduits/notepadconduit/notepad-conduit.cc:105
#, c-format
msgid ""
"_n: 1 notepad could not be saved\n"
"%n notepads could not be saved"
msgstr ""
#: conduits/notepadconduit/notepad-conduit.cc:106
#, c-format
msgid ""
"_n: 1 notepad saved\n"
"%n notepads saved"
msgstr ""
#: conduits/notepadconduit/notepad-factory.cc:67
msgid "Saves notepads to png files"
msgstr ""
#: conduits/notepadconduit/notepad-factory.cc:69
msgid "Configures the Notepad Conduit for KPilot"
msgstr ""
#: conduits/notepadconduit/notepad-factory.cc:78
msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
msgstr ""
#: conduits/recordconduit/factory.cc:64
msgid "Record Conduit"
msgstr ""
#: conduits/recordconduit/factory.cc:66
msgid "Record Conduit for KPilot"
msgstr ""
#: conduits/recordconduit/factory.cc:68
msgid "Configures the Record Conduit for KPilot"
msgstr ""
#: conduits/popmail/popmail-conduit.cc:89 conduits/popmail/setupDialog.cc:66
#, fuzzy
msgid "KMail"
msgstr "KMail"
#: conduits/popmail/setupDialog.cc:68
msgid "Mail Conduit for KPilot"
msgstr ""
#: conduits/popmail/setupDialog.cc:70
msgid "Configures the Mail Conduit for KPilot"
msgstr ""
#: conduits/popmail/setupDialog.cc:78 conduits/vcalconduit/todo-setup.cc:53
#: conduits/vcalconduit/todo-setup.cc:55 conduits/vcalconduit/todo-setup.cc:57
#: conduits/vcalconduit/vcal-setup.cc:58 conduits/vcalconduit/vcal-setup.cc:60
#: conduits/vcalconduit/vcal-setup.cc:62
#, fuzzy
msgid "Original Author"
msgstr "អ្នក​និពន្ធ​ដើម"
#: conduits/popmail/setupDialog.cc:80
msgid "POP3 code"
msgstr ""
#: conduits/popmail/setupDialog.cc:82
msgid "SMTP support and redesign"
msgstr ""
#: conduits/popmail/popmail-conduit.cc:118
#, c-format
msgid ""
"_n: Sent one message\n"
"Sent %n messages"
msgstr ""
#: conduits/popmail/popmail-conduit.cc:138
msgid "No mail was sent."
msgstr ""
#: conduits/popmail/popmail-conduit.cc:145
msgid "No mail could be sent."
msgstr ""
#: conduits/popmail/popmail-conduit.cc:195
msgid "Could not connect to DCOP server for the KMail connection."
msgstr ""
#: conduits/popmail/popmail-conduit.cc:197
#: conduits/popmail/popmail-conduit.cc:232
#: conduits/popmail/popmail-conduit.cc:245
#: conduits/popmail/popmail-conduit.cc:273
msgid "Error Sending Mail"
msgstr ""
#: conduits/popmail/popmail-conduit.cc:230
#: conduits/popmail/popmail-conduit.cc:243
msgid "Cannot open temporary file to store mail from Pilot in."
msgstr ""
#: conduits/popmail/popmail-conduit.cc:272
msgid "DCOP connection with KMail failed."
msgstr ""
#: conduits/popmail/popmail-conduit.cc:397
msgid "Cannot perform backup of mail database"
msgstr ""
#: conduits/popmail/popmail-conduit.cc:405
msgid "Unable to open mail database on handheld"
msgstr ""
#: conduits/vcalconduit/vcal-conduit.cc:178
#: conduits/vcalconduit/vcal-setup.cc:70
#, fuzzy
msgid "Calendar"
msgstr "ប្រតិទិន"
#: conduits/vcalconduit/vcal-conduit.cc:222
msgid ""
"Event \"%1\" has a yearly recurrence other than by month, will change this to "
"recurrence by month on handheld."
msgstr ""
#: conduits/vcalconduit/vcal-setup.cc:44
msgid "VCal Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cc:46
msgid "Configures the VCal Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cc:64
msgid "iCalendar port"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cc:66 kpilot/kpilot.cc:1038
#: kpilot/kpilot.cc:1039
msgid "Bugfixer"
msgstr ""
#: conduits/vcalconduit/vcal-setup.cc:69
msgid "Calendar Destination"
msgstr ""
#: conduits/vcalconduit/cleanupstate.cc:62
msgid "Cleaning up ..."
msgstr ""
#: conduits/vcalconduit/cleanupstate.cc:91
msgid ""
"An error occurred while uploading \"%1\". You can try to upload the temporary "
"local file \"%2\" manually."
msgstr ""
#: conduits/vcalconduit/todo-conduit.cc:183
#: conduits/vcalconduit/todo-setup.cc:45
msgid "To-do"
msgstr ""
#: conduits/vcalconduit/pctohhstate.cc:71
msgid "Copying records to Pilot ..."
msgstr ""
#: conduits/vcalconduit/initstate.cc:59
msgid "Initializing conduit ..."
msgstr ""
#: conduits/vcalconduit/todo-setup.cc:47
msgid "To-do Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/todo-setup.cc:49
msgid "Configures the To-do Conduit for KPilot"
msgstr ""
#: conduits/vcalconduit/todo-setup.cc:69
msgid "To-do Destination"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:183
msgid "Could not open the calendar databases."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:269
msgid ""
"You selected to sync with an iCalendar file, but did not give a filename. "
"Please select a valid file name in the conduit's configuration dialog"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:291
#: conduits/vcalconduit/vcal-conduitbase.cc:356
#, c-format
msgid "Using local time zone: %1"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:292
#: conduits/vcalconduit/vcal-conduitbase.cc:357
#, c-format
msgid "Using non-local time zone: %1"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:321
msgid ""
"You chose to sync with the file \"%1\", which cannot be opened or created. "
"Please make sure to supply a valid file name in the conduit's configuration "
"dialog. Aborting the conduit."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:330
msgid "Syncing with file \"%1\""
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:354
msgid "Syncing with standard calendar resource."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:367
msgid ""
"Unable to initialize the calendar object. Please check the conduit's setup"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:425
msgid ""
"The following item was modified both on the Handheld and on your PC:\n"
"PC entry:\n"
"\t"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:428
msgid ""
"\n"
"Handheld entry:\n"
"\t"
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:430
msgid ""
"\n"
"\n"
"Which entry do you want to keep? It will overwrite the other entry."
msgstr ""
#: conduits/vcalconduit/vcal-conduitbase.cc:435
#, fuzzy
msgid "Conflicting Entries"
msgstr "ធាតុ​កំពុង​ប៉ះទង្គិច​គ្នា"
#: kpilot/conduitConfigDialog.cc:252
msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cc:260
msgid "<qt>This is an old-style conduit.</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cc:264
#, fuzzy
msgid "Configure..."
msgstr "កំណត់​រចនាសម្ព័ន្ធ..."
#: kpilot/conduitConfigDialog.cc:274
msgid ""
"<qt><i>Conduits</i> are external (possibly third-party) programs that perform "
"synchronization actions. They may have individual configurations. Select a "
"conduit to configure it, and enable it by clicking on its checkbox. </qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cc:282
msgid ""
"<qt>"
"<p>The <i>general</i> portion of KPilot's setup contains settings for your "
"hardware and the way KPilot should display your data. For the basic setup, "
"which should fulfill the need of most users, just use the setup wizard "
"below.</p>If you need some special settings, this dialog provides all the "
"options for fine-tuning KPilot. But be warned: The HotSync settings are various "
"esoteric things.</p>"
"<p>You can enable an action or conduit by clicking on its checkbox. Checked "
"conduits will be run during a HotSync. Select a conduit to configure it.</p>"
"</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cc:295
#, fuzzy
msgid "Configuration Wizard"
msgstr "អ្នក​ជំនួយការ​ការរចនាសម្ព័ន្ធ​"
#: kpilot/conduitConfigDialog.cc:369
msgid "About KPilot. Credits."
msgstr ""
#: kpilot/conduitConfigDialog.cc:372
msgid "Conduits"
msgstr ""
#: kpilot/conduitConfigDialog.cc:374
msgid "General Setup"
msgstr ""
#: kpilot/conduitConfigDialog.cc:382
msgid "General setup of KPilot (User name, port, general sync settings)"
msgstr ""
#: kpilot/conduitConfigDialog.cc:384
msgid "Actions for HotSync with individual configuration."
msgstr ""
#: kpilot/conduitConfigDialog.cc:395 kpilot/kpilotConfigDialog.cc:470
msgid "Startup and Exit"
msgstr ""
#: kpilot/conduitConfigDialog.cc:395
msgid "Behavior at startup and exit."
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 33
#: kpilot/conduitConfigDialog.cc:396 kpilot/kpilotConfigDialog.cc:418
#: rc.cpp:1223
#, no-c-format
msgid "Viewers"
msgstr ""
#: kpilot/conduitConfigDialog.cc:396
msgid "Viewer settings."
msgstr ""
#: kpilot/conduitConfigDialog.cc:397
msgid "Special settings for backup."
msgstr ""
#: kpilot/conduitConfigDialog.cc:398
msgid "Special behavior during HotSync."
msgstr ""
#: kpilot/conduitConfigDialog.cc:399 kpilot/kpilotConfigDialog.cc:102
#, fuzzy
msgid "Device"
msgstr "ឧបករណ៍"
#: kpilot/conduitConfigDialog.cc:399
msgid "Hardware settings and startup and exit options."
msgstr ""
#: kpilot/conduitConfigDialog.cc:542
msgid ""
"<qt>This is an internal action which has no configuration options. The action's "
"description is: <i>%1</i> </qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cc:722
msgid "KPilot Setup"
msgstr ""
#: kpilot/conduitConfigDialog.cc:735
msgid ""
"<qt>No library could be found for the conduit %1. This means that the conduit "
"was not installed properly.</qt>"
msgstr ""
#: kpilot/conduitConfigDialog.cc:745 kpilot/conduitConfigDialog.cc:762
msgid "Conduit Error"
msgstr ""
#: kpilot/conduitConfigDialog.cc:752
msgid ""
"<qt>There was a problem loading the library for the conduit %1. This means that "
"the conduit was not installed properly.</qt>"
msgstr ""
#: kpilot/dbSelectionDialog.cc:108
msgid ""
"This is a database that exists on the device. It was not added manually, so it "
"can not removed from the list."
msgstr ""
#: kpilot/dbSelectionDialog.cc:108
msgid "Database on Device"
msgstr ""
#: kpilot/dbSelectionDialog.cc:119
msgid "You need to select a database to delete in the list."
msgstr ""
#: kpilot/dbSelectionDialog.cc:119
msgid "No Database Selected"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:62
msgid "Pilot Info"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:64
msgid "Application to Sync With"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:127
msgid "general KDE-PIM"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:133
msgid ""
"_: Gnome's PIM suite\n"
"Evolution"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:157
msgid ""
"KPilot cannot yet synchronize the addressbook with Evolution, so the "
"addressbook conduit was disabled.\n"
"When syncing the calendar or to-do list using KPilot please quit Evolution "
"before the sync, otherwise you will lose data."
msgstr ""
#: kpilot/kpilotConfigWizard.cc:157
msgid "Restrictions with Evolution"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:162
msgid ""
"_: Kpilot will sync with nothing\n"
"nothing (it will backup only)"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:166
msgid ""
"_: KDE's PIM suite\n"
"Kontact"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:200
#, c-format
msgid "KPilot is now configured to sync with %1."
msgstr ""
#: kpilot/kpilotConfigWizard.cc:205
msgid ""
"The remaining options in the config dialog are advanced options and can be used "
"to fine-tune KPilot."
msgstr ""
#: kpilot/kpilotConfigWizard.cc:210
msgid "Automatic Configuration Finished"
msgstr ""
#: kpilot/kpilotConfigWizard.cc:217
msgid ""
"Please put the handheld in the cradle, press the hotsync button and click on "
"\"Continue\".\n"
"\n"
"Some kernel versions (Linux 2.6.x) have problems with the visor kernel module "
"(for Sony Clie devices). Running an autodetection in that case might block the "
"computer from doing hotsyncs until it is rebooted. In that case it might be "
"advisable not to continue."
msgstr ""
#: kpilot/kpilotConfigWizard.cc:223
msgid "Handheld Detection"
msgstr ""
#: kpilot/kpilotConfig.cc:163
msgid "The configuration file is outdated."
msgstr ""
#: kpilot/kpilotConfig.cc:165
msgid "The configuration file has version %1, while KPilot needs version %2."
msgstr ""
#: kpilot/kpilotConfig.cc:170
msgid ""
"Please run KPilot and check the configuration carefully to update the file."
msgstr ""
#: kpilot/kpilotConfig.cc:174
msgid "Important changes to watch for are:"
msgstr ""
#: kpilot/kpilotConfig.cc:178
msgid ""
"Renamed conduits, Kroupware and file installer have been made conduits as well."
msgstr ""
#: kpilot/kpilotConfig.cc:181
msgid "Conflict resolution is now a global setting."
msgstr ""
#: kpilot/kpilotConfig.cc:186
msgid "Changed format of no-backup databases."
msgstr ""
#: kpilot/kpilotConfig.cc:199
msgid ""
"The configuration file for KPilot is out-of date. Please run KPilot to update "
"it."
msgstr ""
#: kpilot/kpilotConfig.cc:202 kpilot/kpilotConfig.cc:327
msgid "Configuration File Out-of Date"
msgstr ""
#: kpilot/kpilotConfig.cc:220
msgid ""
"The settings for the file installer have been moved to the conduits "
"configuration. Check the installed conduits list."
msgstr ""
#: kpilot/kpilotConfig.cc:223
msgid "Settings Updated"
msgstr ""
#: kpilot/kpilotConfig.cc:248
msgid ""
"<qt>The following old conduits were found on your system. It is a good idea to "
"remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
msgstr ""
#: kpilot/kpilotConfig.cc:253
msgid "Old Conduits Found"
msgstr ""
#: kpilot/kpilotConfig.cc:285
msgid ""
"<qt>The no backup databases listed in your configuration file have been "
"adjusted to the new format. Database creator IDs have been changed to use "
"square brackets []."
msgstr ""
#: kpilot/kpilotConfig.cc:289
msgid "No Backup Databases Updated"
msgstr ""
#: kpilot/kpilotConfig.cc:310
msgid ""
"KPilot is not configured for use. You may use the configuration wizard or the "
"normal configure dialog to configure KPilot."
msgstr ""
#: kpilot/kpilotConfig.cc:313
msgid "Not Configured"
msgstr ""
#: kpilot/kpilotConfig.cc:314
msgid "Use &Wizard"
msgstr ""
#: kpilot/kpilotConfig.cc:315
msgid "Use &Dialog"
msgstr ""
#: kpilot/kpilotConfig.cc:323
msgid ""
"The configuration file for KPilot is out-of date. KPilot can update some parts "
"of the configuration automatically. Do you wish to continue?"
msgstr ""
#: kpilot/dbRecordEditor.cc:53
msgid "Edit Record"
msgstr ""
#: kpilot/dbRecordEditor.cc:75
msgid ""
"Changing the record data and flags might corrupt the whole record, or even make "
"the database unusable. Do not change the values unless you are absolutely sure "
"you know what you are doing.\n"
"\n"
"Really assign these new flags?"
msgstr ""
#: kpilot/dbRecordEditor.cc:75
msgid "Changing Record"
msgstr ""
#: kpilot/dbFlagsEditor.cc:60 kpilot/dbRecordEditor.cc:75
msgid "Assign"
msgstr ""
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 24
#: kpilot/dbRecordEditor.cc:106 rc.cpp:1388
#, no-c-format
msgid "Record index:"
msgstr ""
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 32
#: kpilot/dbRecordEditor.cc:107 rc.cpp:1391
#, no-c-format
msgid "Record ID:"
msgstr ""
#. i18n: file ./kpilot/todoEditor_base.ui line 99
#: kpilot/dbRecordEditor.cc:108 kpilot/dbRecordEditor.cc:109 rc.cpp:980
#: rc.cpp:1394 rc.cpp:1397
#, fuzzy, no-c-format
msgid "1"
msgstr "១"
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 70
#: kpilot/dbRecordEditor.cc:110 rc.cpp:1400
#, fuzzy, no-c-format
msgid "Flags"
msgstr "ទង់"
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 81
#: kpilot/dbRecordEditor.cc:111 rc.cpp:1403
#, no-c-format
msgid "&Dirty"
msgstr ""
#: kpilot/dbRecordEditor.cc:112
msgid "De&leted"
msgstr ""
#: kpilot/dbRecordEditor.cc:113
#, fuzzy
msgid "&Busy"
msgstr "រវល់"
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 105
#: kpilot/dbRecordEditor.cc:114 rc.cpp:1412
#, fuzzy, no-c-format
msgid "&Secret"
msgstr "សម្ងាត់"
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 113
#: kpilot/dbRecordEditor.cc:115 rc.cpp:1415
#, no-c-format
msgid "&Archived"
msgstr ""
#: kpilot/dbRecordEditor.cc:193
msgid ""
"To view and edit the record data, please install a hex editor (e.g. kbytesedit "
"from tdeutils)."
msgstr ""
#: kpilot/datebookWidget.cc:58 kpilot/dbviewerWidget.cc:109
#, fuzzy
msgid "&Add..."
msgstr "បន្ថែម..."
#: kpilot/datebookWidget.cc:61 kpilot/dbviewerWidget.cc:111
#, fuzzy
msgid "&Edit..."
msgstr "កែសម្រួល..."
#: kpilot/datebookWidget.cc:64
msgid "&Delete..."
msgstr ""
#: kpilot/datebookWidget.cc:69
msgid "Al"
msgstr ""
#: kpilot/datebookWidget.cc:70
msgid "Rec"
msgstr ""
#: kpilot/datebookWidget.cc:71 kpilot/listCat.cc:85
#, fuzzy
msgid "Description"
msgstr "ការពិពណ៌នា"
#: kpilot/dbFlagsEditor.cc:45
msgid "Edit Database Flags"
msgstr ""
#: kpilot/dbFlagsEditor.cc:60
msgid ""
"Changing the database flags might corrupt the whole database, or make the data "
"unusable. Do not change the values unless you are absolutely sure you know what "
"you are doing.\n"
"\n"
"Really assign these new flags?"
msgstr ""
#: kpilot/dbFlagsEditor.cc:60
msgid "Changing Database Flags"
msgstr ""
#: kpilot/todoEditor.cc:49
msgid "To-do Editor"
msgstr ""
#: kpilot/logWidget.cc:98
msgid ""
"<qt>This lists all the messages received during the current HotSync</qt>"
msgstr ""
#: kpilot/logWidget.cc:127
msgid "<qt><b>HotSync Log</b></qt>"
msgstr ""
#: kpilot/logWidget.cc:142
msgid ""
"_: Clear the text of HotSync messages\n"
"Clear Log"
msgstr ""
#: kpilot/logWidget.cc:144
msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
msgstr ""
#: kpilot/logWidget.cc:148
#, fuzzy
msgid "Save Log..."
msgstr "រក្សា​ទុក​កំណត់​ហេតុ..."
#: kpilot/logWidget.cc:149
msgid ""
"<qt>You can save the list of messages received during this HotSync to a file "
"(for example for use in a bug report) by clicking here.</qt>"
msgstr ""
#: kpilot/logWidget.cc:158
msgid "Sync progress:"
msgstr ""
#: kpilot/logWidget.cc:161
msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
msgstr ""
#: kpilot/logWidget.cc:283
msgid "<b>HotSync Finished.</b>"
msgstr ""
#: kpilot/logWidget.cc:347
msgid "Save Log"
msgstr ""
#: kpilot/logWidget.cc:354
msgid "The file exists. Do you want to overwrite it?"
msgstr ""
#: kpilot/logWidget.cc:356
#, fuzzy
msgid "File Exists"
msgstr "មាន​ឯកសារ​រួច​ហើយ"
#: kpilot/logWidget.cc:356
#, fuzzy
msgid "Do Not Overwrite"
msgstr "កុំ​សរសេរ​ជាន់លើ"
#: kpilot/logWidget.cc:380
msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
msgstr ""
#: kpilot/logWidget.cc:382
msgid "Cannot Save"
msgstr ""
#: kpilot/logWidget.cc:382
#, fuzzy
msgid "Try Again"
msgstr "ព្យាយាម​ម្តងទៀត"
#: kpilot/logWidget.cc:382
#, fuzzy
msgid "Do Not Try"
msgstr "កុំ​ព្យាយាម"
#: kpilot/pilotDaemon.cc:157
msgid "Start &KPilot"
msgstr ""
#: kpilot/pilotDaemon.cc:159
msgid "&Configure KPilot..."
msgstr ""
#: kpilot/pilotDaemon.cc:164
msgid ""
"_: Appended to names of sync types to indicate the sync will happen just one "
"time\n"
" (once)"
msgstr ""
#: kpilot/pilotDaemon.cc:168
msgid "Default (%1)"
msgstr ""
#: kpilot/pilotDaemon.cc:185
msgid "Next &Sync"
msgstr ""
#: kpilot/pilotDaemon.cc:670
msgid "Next HotSync will be: %1. "
msgstr ""
#: kpilot/kpilot.cc:361 kpilot/kpilot.cc:369 kpilot/kpilot.cc:377
#: kpilot/kpilot.cc:385 kpilot/kpilot.cc:393 kpilot/kpilot.cc:401
#: kpilot/pilotDaemon.cc:671
msgid "Please press the HotSync button."
msgstr ""
#: kpilot/kpilot.cc:278 kpilot/kpilot.cc:281 kpilot/pilotDaemon.cc:736
msgid "File Installer"
msgstr ""
#: kpilot/pilotDaemon.cc:902
msgid "HotSync is disabled while the screen is locked."
msgstr ""
#: kpilot/pilotDaemon.cc:907
msgid ""
"HotSync is disabled because KPilot could not determine the state of the screen "
"saver. You can disable this security feature by unchecking the 'do not sync "
"when screensaver is active' box in the HotSync page of the configuration "
"dialog."
msgstr ""
#: kpilot/pilotDaemon.cc:1165 kpilot/pilotDaemon.cc:1166
msgid "HotSync Completed.<br>"
msgstr ""
#: kpilot/pilotDaemon.cc:1274
#, c-format
msgid "Next sync is %1."
msgstr ""
#: kpilot/kpilot.cc:993 kpilot/pilotDaemon.cc:1296
msgid "Set debugging level"
msgstr ""
#: kpilot/pilotDaemon.cc:1298
msgid "Device to try first"
msgstr ""
#: kpilot/pilotDaemon.cc:1299
msgid "Exit instead of complaining about bad configuration files"
msgstr ""
#: kpilot/pilotDaemon.cc:1311
msgid "KPilot Daemon"
msgstr ""
#: kpilot/kpilot.cc:1024 kpilot/pilotDaemon.cc:1320
#, fuzzy
msgid "Project Leader"
msgstr "អ្នក​ដឹក​នាំ​គម្រោង"
#: kpilot/pilotDaemon.cc:1326
#, fuzzy
msgid "Developer"
msgstr "អ្នក​អភិវឌ្ឍន៍"
#: kpilot/kroupware.cc:126
msgid "Syncing to-dos with KMail"
msgstr ""
#: kpilot/kroupware.cc:135
msgid "Syncing calendar with KMail"
msgstr ""
#: kpilot/kroupware.cc:177
msgid "Syncing Notes with Mail"
msgstr ""
#: kpilot/kroupware.cc:188
msgid "Rewriting to-dos to KMail..."
msgstr ""
#: kpilot/kroupware.cc:195
msgid "Rewriting Calendar to KMail"
msgstr ""
#: kpilot/kroupware.cc:230
msgid "Syncing KMail with Addresses "
msgstr ""
#: kpilot/kroupware.cc:259
msgid "Syncing KMail with Notes"
msgstr ""
#: kpilot/dbAppInfoEditor.cc:46
msgid "Edit AppInfo Block"
msgstr ""
#: kpilot/dbAppInfoEditor.cc:68
msgid ""
"To view the Application info block data, please install a hex editor (e.g. "
"khexedit from tdeutils)."
msgstr ""
#: kpilot/dbAppInfoEditor.cc:86
msgid "Changing the AppInfo block isn't yet supported by KPilot!"
msgstr ""
#: kpilot/memoWidget.cc:234
msgid ""
"Select the category of addresses\n"
"to display here."
msgstr ""
#: kpilot/memoWidget.cc:237
msgid "Memos:"
msgstr ""
#: kpilot/addressWidget.cc:226 kpilot/memoWidget.cc:238
#: kpilot/todoWidget.cc:220
#, fuzzy
msgid "Category:"
msgstr "ប្រភេទ​ ៖"
#: kpilot/memoWidget.cc:249
msgid ""
"This list displays all the memos\n"
"in the selected category. Click on\n"
"one to display it to the right."
msgstr ""
#: kpilot/memoWidget.cc:253
msgid "Memo text:"
msgstr ""
#: kpilot/memoWidget.cc:261
msgid "The text of the selected memo appears here."
msgstr ""
#: kpilot/memoWidget.cc:264
msgid "Import Memo..."
msgstr ""
#: kpilot/memoWidget.cc:268
msgid "Read a text file and add it to the Pilot's memo database."
msgstr ""
#: kpilot/memoWidget.cc:269
msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/memoWidget.cc:272
msgid "Export Memo..."
msgstr ""
#: kpilot/memoWidget.cc:277
msgid "Write the selected memo to a file."
msgstr ""
#: kpilot/memoWidget.cc:279
msgid "Delete Memo"
msgstr ""
#: kpilot/memoWidget.cc:284
msgid "Delete the selected memo."
msgstr ""
#: kpilot/addressWidget.cc:275 kpilot/memoWidget.cc:285
#: kpilot/todoWidget.cc:281
msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/memoWidget.cc:288
msgid "Add Memo"
msgstr ""
#: kpilot/memoWidget.cc:291
msgid "Add a new memo to the database."
msgstr ""
#: kpilot/memoWidget.cc:343
msgid "Delete currently selected memo?"
msgstr ""
#: kpilot/memoWidget.cc:344
msgid "Delete Memo?"
msgstr ""
#: kpilot/memoWidget.cc:367
msgid "Cannot open MemoDB to delete record."
msgstr ""
#: kpilot/memoWidget.cc:368
msgid "Cannot Delete Memo"
msgstr ""
#: kpilot/addressEditor.cc:60
msgid "Address Editor"
msgstr ""
#: kpilot/addressEditor.cc:108
#, fuzzy
msgid "Phone"
msgstr "ទូរស័ព្ទ"
#: kpilot/addressEditor.cc:181
#, fuzzy
msgid "Last name:"
msgstr "នាម​ត្រកូល ៖"
#: kpilot/addressEditor.cc:182
#, fuzzy
msgid "First name:"
msgstr "នាមខ្លួន​ ៖"
#: kpilot/addressEditor.cc:183
#, fuzzy
msgid "Title:"
msgstr "ចំណងជើង ៖"
#: kpilot/addressEditor.cc:184
#, fuzzy
msgid "Company:"
msgstr "ក្រុមហ៊ុន​ ៖"
#: kpilot/addressEditor.cc:193
#, fuzzy
msgid "Address:"
msgstr "អាសយដ្ឋាន ៖"
#: kpilot/addressEditor.cc:194
#, fuzzy
msgid "City:"
msgstr "ទីក្រុង​ ៖"
#: kpilot/addressEditor.cc:195
#, fuzzy
msgid "State:"
msgstr "សភាព"
#: kpilot/addressEditor.cc:196
msgid "Zip code:"
msgstr ""
#: kpilot/addressEditor.cc:197
#, fuzzy
msgid "Country:"
msgstr "ប្រទេស ៖"
#: kpilot/addressEditor.cc:198
msgid "Custom 1:"
msgstr ""
#: kpilot/addressEditor.cc:199
msgid "Custom 2:"
msgstr ""
#: kpilot/addressEditor.cc:200
msgid "Custom 3:"
msgstr ""
#: kpilot/addressEditor.cc:201
msgid "Custom 4:"
msgstr ""
#: kpilot/pilotComponent.cc:153
#, fuzzy
msgid "All"
msgstr "ទាំង​អស់"
#: kpilot/kpilotConfigDialog.cc:68
msgid ""
"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
"want to save the changes before continuing?</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog.cc:145
msgid ""
"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. This "
"is probably unsupported and can cause problems. Are you sure you want to use "
"this device name?</qt>"
msgstr ""
#: kpilot/kpilotConfigDialog.cc:150
msgid "Device Name too Long"
msgstr ""
#: kpilot/kpilotConfigDialog.cc:150
#, fuzzy
msgid "Use"
msgstr "ប្រើ"
#: kpilot/kpilotConfigDialog.cc:150
#, fuzzy
msgid "Do Not Use"
msgstr "កុំប្រើ"
#: kpilot/dbviewerWidget.cc:84
#, fuzzy
msgid "All Databases"
msgstr "មូលដ្ឋាន​ទិន្ន័យ​ទាំងអស់"
#: kpilot/dbviewerWidget.cc:85
msgid "Only Applications (*.prc)"
msgstr ""
#: kpilot/dbviewerWidget.cc:86
msgid "Only Databases (*.pdb)"
msgstr ""
#: kpilot/dbviewerWidget.cc:93
msgid "General Database &Information"
msgstr ""
#: kpilot/dbviewerWidget.cc:95
msgid "&Application Info Block (Categories etc.)"
msgstr ""
#: kpilot/dbviewerWidget.cc:101
msgid "Rec. Nr."
msgstr ""
#: kpilot/dbviewerWidget.cc:102
#, fuzzy
msgid "Length"
msgstr "ប្រវែង"
#: kpilot/dbviewerWidget.cc:103
msgid "Record ID"
msgstr ""
#: kpilot/dbviewerWidget.cc:189
#, c-format
msgid "<B>Warning:</B> Cannot read database file %1."
msgstr ""
#: kpilot/dbviewerWidget.cc:194
msgid "<B>Database:</B> %1, %2 records<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cc:203
msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
msgstr ""
#: kpilot/dbviewerWidget.cc:246 kpilot/dbviewerWidget.cc:253
#, c-format
msgid "<B>Warning:</B> Cannot read application file %1."
msgstr ""
#: kpilot/dbviewerWidget.cc:260
msgid "<B>Application:</B> %1<BR><BR>"
msgstr ""
#: kpilot/dbviewerWidget.cc:267
msgid "Created: %1<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cc:270
msgid "Modified: %1<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cc:273
msgid "Backed up: %1<BR>"
msgstr ""
#: kpilot/dbviewerWidget.cc:353
msgid "You must select a record for editing."
msgstr ""
#: kpilot/dbviewerWidget.cc:353
msgid "No Record Selected"
msgstr ""
#: kpilot/dbviewerWidget.cc:366
msgid ""
"<qt>Do you really want to delete the selected record? This cannot be undone."
"<br>"
"<br>Delete record?<qt>"
msgstr ""
#: kpilot/dbviewerWidget.cc:366
msgid "Deleting Record"
msgstr ""
#: kpilot/todoWidget.cc:174
msgid "There are still %1 to-do editing windows open."
msgstr ""
#: kpilot/todoWidget.cc:178
#, c-format
msgid ""
"_n: There is still a to-do editing window open.\n"
"There are still %n to-do editing windows open."
msgstr ""
#: kpilot/todoWidget.cc:218
msgid "<qt>Select the category of to-dos to display here.</qt>"
msgstr ""
#: kpilot/todoWidget.cc:225
msgid "To-do Item"
msgstr ""
#: kpilot/todoWidget.cc:243
msgid ""
"<qt>This list displays all the to-dos in the selected category. Click on one to "
"display it to the right.</qt>"
msgstr ""
#: kpilot/todoWidget.cc:247
msgid "To-do info:"
msgstr ""
#: kpilot/addressWidget.cc:251 kpilot/todoWidget.cc:257
msgid "Edit Record..."
msgstr ""
#: kpilot/todoWidget.cc:262
msgid "<qt>You can edit a to-do when it is selected.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:256 kpilot/todoWidget.cc:263
msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/addressWidget.cc:259 kpilot/todoWidget.cc:266
msgid "New Record..."
msgstr ""
#: kpilot/todoWidget.cc:270
msgid "<qt>Add a new to-do to the to-do list.</qt>"
msgstr ""
#: kpilot/todoWidget.cc:271
msgid ""
"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/addressWidget.cc:269 kpilot/todoWidget.cc:275
msgid "Delete Record"
msgstr ""
#: kpilot/todoWidget.cc:280
msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:435 kpilot/todoWidget.cc:363
msgid "Cannot edit new records until HotSynced with Pilot."
msgstr ""
#: kpilot/addressWidget.cc:437 kpilot/addressWidget.cc:574
#: kpilot/todoWidget.cc:365 kpilot/todoWidget.cc:498
msgid "HotSync Required"
msgstr ""
#: kpilot/todoWidget.cc:408
msgid ""
"You cannot add to-dos to the to-do list until you have done a HotSync at least "
"once to retrieve the database layout from your Pilot."
msgstr ""
#: kpilot/todoWidget.cc:411
msgid "Cannot Add New To-do"
msgstr ""
#: kpilot/addressWidget.cc:572 kpilot/todoWidget.cc:496
msgid "New records cannot be deleted until HotSynced with pilot."
msgstr ""
#: kpilot/addressWidget.cc:579 kpilot/todoWidget.cc:503
msgid "Delete currently selected record?"
msgstr ""
#: kpilot/addressWidget.cc:580 kpilot/todoWidget.cc:504
msgid "Delete Record?"
msgstr ""
#: kpilot/internalEditorAction.cc:62
msgid "[Internal Editors]"
msgstr ""
#: kpilot/internalEditorAction.cc:76
#, c-format
msgid "Databases with changed records: %1"
msgstr ""
#: kpilot/internalEditorAction.cc:101
msgid "Unable to open the serial or local database for %1. Skipping it."
msgstr ""
#: kpilot/internalEditorAction.cc:156
#, fuzzy
msgid "record"
msgstr "ថត"
#: kpilot/internalEditorAction.cc:166
msgid "address"
msgstr ""
#: kpilot/internalEditorAction.cc:177
msgid "to-do entry"
msgstr ""
#: kpilot/internalEditorAction.cc:186
msgid "memo"
msgstr ""
#: kpilot/internalEditorAction.cc:197
msgid "calendar entry"
msgstr ""
#: kpilot/internalEditorAction.cc:204
msgid ""
"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in the "
"internal editor. Shall the changes in KPilot be copied to the handheld, and so "
"override the changes there?"
msgstr ""
#: kpilot/internalEditorAction.cc:209
#, c-format
msgid "Conflict in database %1"
msgstr ""
#: kpilot/internalEditorAction.cc:211
msgid "Use KPilot"
msgstr ""
#: kpilot/internalEditorAction.cc:211
msgid "Use Handheld"
msgstr ""
#: kpilot/internalEditorAction.cc:212
msgid "Use &KPilot"
msgstr ""
#: kpilot/internalEditorAction.cc:213
msgid "Use &Handheld"
msgstr ""
#: kpilot/internalEditorAction.cc:228 kpilot/internalEditorAction.cc:244
msgid "Entry in KPilot"
msgstr ""
#: kpilot/internalEditorAction.cc:235 kpilot/internalEditorAction.cc:272
msgid "Entry on Handheld"
msgstr ""
#: kpilot/internalEditorAction.cc:263 kpilot/internalEditorAction.cc:291
msgid ""
"To view and edit the record data, please install a hex editor (e.g. khexedit "
"from tdeutils)."
msgstr ""
#: kpilot/internalEditorAction.cc:315
#, c-format
msgid "Databases with changed flags: %1"
msgstr ""
#: kpilot/internalEditorAction.cc:333
msgid "Setting the database flags on the handheld is not yet supported."
msgstr ""
#: kpilot/internalEditorAction.cc:356
#, c-format
msgid "Databases with changed AppBlock: %1"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:90
msgid "Autodetecting Your Handheld"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:90
msgid "Restart Detection"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:97
msgid ""
"KPilot is now trying to automatically detect the device of your handheld. "
"Please press the hotsync button if you have not done so already."
msgstr ""
#: kpilot/kpilotProbeDialog.cc:100
#, fuzzy
msgid "Status"
msgstr "ស្ថានភាព"
#: kpilot/kpilotProbeDialog.cc:104
msgid "Autodetection not yet started..."
msgstr ""
#: kpilot/kpilotProbeDialog.cc:113
msgid "Detected Values"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:119
msgid "Handheld user:"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:123
#, fuzzy
msgid "Device:"
msgstr "ឧបករណ៍ ៖"
#: kpilot/kpilotProbeDialog.cc:126 kpilot/kpilotProbeDialog.cc:129
msgid "[Not yet known]"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:195
msgid "Starting detection..."
msgstr ""
#: kpilot/kpilotProbeDialog.cc:233
msgid "Waiting for handheld to connect..."
msgstr ""
#: kpilot/kpilotProbeDialog.cc:266
msgid "Timeout reached, could not detect a handheld."
msgstr ""
#: kpilot/kpilotProbeDialog.cc:267
msgid ""
"<qt>A handheld could not be detected. Possible check the following things:</p>"
"<ul>"
"<li> Have you pressed the hotsync button on the handheld?\n"
"<li> Make sure the device sits in the cradle correctly.\n"
"<li> Make sure the cradle is correctly plugged in to the computer.\n"
"<li> Have you checked that your device is actually supported by kpilot (see "
"http://www.kpilot.org).\n"
"</ul>"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:273
msgid "Automatic Detection Failed"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:288
#, c-format
msgid "Found a connected device on %1"
msgstr ""
#: kpilot/kpilotProbeDialog.cc:338
msgid "Disconnected from all devices"
msgstr ""
#: kpilot/fileInstallWidget.cc:71
msgid "Files to install:"
msgstr ""
#: kpilot/fileInstallWidget.cc:77
msgid "Add File..."
msgstr ""
#: kpilot/fileInstallWidget.cc:81
msgid "<qt>Choose a file to add to the list of files to install.</qt>"
msgstr ""
#: kpilot/fileInstallWidget.cc:83
#, fuzzy
msgid "Clear List"
msgstr "ជម្រះ បញ្ជី"
#: kpilot/fileInstallWidget.cc:87
msgid ""
"<qt>Clear the list of files to install. No files will be installed.</qt>"
msgstr ""
#: kpilot/fileInstallWidget.cc:95
msgid ""
"<qt>This lists files that will be installed on the Pilot during the next "
"HotSync. Drag files here or use the Add button.</qt>"
msgstr ""
#: kpilot/fileInstallWidget.cc:217
msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
msgstr ""
#: kpilot/fileInstallWidget.cc:291
msgid ""
"_: Delete a single file item\n"
"Delete"
msgstr ""
#: kpilot/fileInstallWidget.cc:294
msgid "Delete selected files"
msgstr ""
#: kpilot/hotSync.cc:339
#, c-format
msgid "Backup directory: %1."
msgstr ""
#: kpilot/hotSync.cc:353
msgid "Full backup started."
msgstr ""
#: kpilot/hotSync.cc:358
msgid "Fast backup started"
msgstr ""
#: kpilot/hotSync.cc:387
msgid "Exiting on cancel."
msgstr ""
#: kpilot/hotSync.cc:399
msgid "Full backup complete."
msgstr ""
#: kpilot/hotSync.cc:403
msgid "Fast backup complete."
msgstr ""
#: kpilot/hotSync.cc:419
#, c-format
msgid "Backing up: %1"
msgstr ""
#: kpilot/hotSync.cc:447
#, c-format
msgid "Skipping %1"
msgstr ""
#: kpilot/hotSync.cc:482
msgid ""
"Backup of %1 failed.\n"
msgstr ""
#: kpilot/hotSync.cc:540
msgid ""
"... OK.\n"
msgstr ""
#: kpilot/hotSync.cc:548
#, fuzzy
msgid "Backup failed."
msgstr "ព័ត៌មាន​បម្រុង"
#: kpilot/hotSync.cc:607
msgid "[File Installer]"
msgstr ""
#: kpilot/hotSync.cc:612
msgid "No Files to install"
msgstr ""
#: kpilot/hotSync.cc:624
#, c-format
msgid ""
"_n: Installing one file\n"
"Installing %n Files"
msgstr ""
#: kpilot/hotSync.cc:649
msgid "Done Installing Files"
msgstr ""
#: kpilot/hotSync.cc:663
#, c-format
msgid "Installing %1"
msgstr ""
#: kpilot/hotSync.cc:686
msgid "Cannot install file &quot;%1&quot;."
msgstr ""
#: kpilot/hotSync.cc:713 kpilot/hotSync.cc:723
msgid "Unable to open file &quot;%1&quot;."
msgstr ""
#: kpilot/hotSync.cc:732
msgid "Unable to read file &quot;%1&quot;."
msgstr ""
#: kpilot/hotSync.cc:748
msgid ""
"The database in &quot;%1&quot; has a resource name that is longer than 31 "
"characters. This suggests a bug in the tool used to create the database. KPilot "
"cannot install this database."
msgstr ""
#: kpilot/hotSync.cc:806
msgid ""
"_: A common name\n"
"John Doe"
msgstr ""
#: kpilot/hotSync.cc:808
msgid ""
"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
msgstr ""
#: kpilot/hotSync.cc:814 kpilot/hotSync.cc:831 kpilot/hotSync.cc:855
msgid "User Unknown"
msgstr ""
#: kpilot/hotSync.cc:826
msgid ""
"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
"KPilot use this username in future?</qt>"
msgstr ""
#: kpilot/hotSync.cc:844
msgid ""
"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
"KPilot's username be set in the handheld as well?"
msgstr ""
#: kpilot/hotSync.cc:848
msgid ""
"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to stop "
"this sync.)"
msgstr ""
#: kpilot/hotSync.cc:877
msgid ""
"<qt>The handheld thinks that the username is %1; however, KPilot says you are "
"%2.Which of these is the correct name?\n"
"If you click on Cancel, the sync will proceed, but the usernames will not be "
"changed.</qt>"
msgstr ""
#: kpilot/hotSync.cc:887
msgid "User Mismatch"
msgstr ""
#: kpilot/hotSync.cc:890
msgid "Use KPilot Name"
msgstr ""
#: kpilot/hotSync.cc:891
msgid "Use Handheld Name"
msgstr ""
#: kpilot/hotSync.cc:997
msgid "Restore directory does not exist."
msgstr ""
#: kpilot/hotSync.cc:998 kpilot/hotSync.cc:1013
msgid "Restore not performed."
msgstr ""
#: kpilot/hotSync.cc:1003
msgid ""
"<qt>Are you sure you want to completely restore your Pilot from the backup "
"directory (<i>%1</i>)? This will erase any information you currently have on "
"your Pilot.</qt>"
msgstr ""
#: kpilot/hotSync.cc:1008
msgid "Restore Pilot"
msgstr ""
#: kpilot/hotSync.cc:1010
msgid "Restore <i>not</i> performed."
msgstr ""
#: kpilot/hotSync.cc:1012
msgid "Canceled by user."
msgstr ""
#: kpilot/hotSync.cc:1024 kpilot/hotSync.cc:1094
msgid "Restoring %1..."
msgstr ""
#: kpilot/hotSync.cc:1044
msgid "File '%1' cannot be read."
msgstr ""
#: kpilot/hotSync.cc:1071
msgid "OK."
msgstr ""
#: kpilot/hotSync.cc:1085
msgid "Restore incomplete."
msgstr ""
#: kpilot/hotSync.cc:1100
msgid "Cannot restore file `%1'."
msgstr ""
#: kpilot/kpilot.cc:162
msgid "Starting the KPilot daemon ..."
msgstr ""
#: kpilot/kpilot.cc:179
msgid ""
"Could not start the KPilot daemon. The system error message was: &quot;%1&quot;"
msgstr ""
#: kpilot/kpilot.cc:196
msgid "Daemon status is `%1'"
msgstr ""
#: kpilot/kpilot.cc:197
msgid "not running"
msgstr ""
#: kpilot/kpilot.cc:214
msgid "Using character set %1 on the handheld."
msgstr ""
#: kpilot/kpilot.cc:266 kpilot/kpilot.cc:268
msgid "To-do Viewer"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 74
#: kpilot/kpilot.cc:270 kpilot/kpilot.cc:272 rc.cpp:1238
#, no-c-format
msgid "Address Viewer"
msgstr ""
#: kpilot/kpilot.cc:274 kpilot/kpilot.cc:276
msgid "Memo Viewer"
msgstr ""
#: kpilot/kpilot.cc:283 kpilot/kpilot.cc:285
msgid "Generic DB Viewer"
msgstr ""
#: kpilot/kpilot.cc:360
msgid "Next sync will be a backup. "
msgstr ""
#: kpilot/kpilot.cc:368
msgid "Next sync will restore the Pilot from backup. "
msgstr ""
#: kpilot/kpilot.cc:376
msgid "Next sync will be a regular HotSync. "
msgstr ""
#: kpilot/kpilot.cc:384
msgid "Next sync will be a Full Sync. "
msgstr ""
#: kpilot/kpilot.cc:392
msgid "Next sync will copy Handheld data to PC. "
msgstr ""
#: kpilot/kpilot.cc:400
msgid "Next sync will copy PC data to Handheld. "
msgstr ""
#: kpilot/kpilot.cc:428
msgid "The daemon has exited."
msgstr ""
#: kpilot/kpilot.cc:429
msgid "No further HotSyncs are possible."
msgstr ""
#: kpilot/kpilot.cc:430
msgid "Restart the daemon to HotSync again."
msgstr ""
#: kpilot/kpilot.cc:450
#, c-format
msgid "Cannot start a Sync now. %1"
msgstr ""
#: kpilot/kpilot.cc:463
msgid "Cannot start Sync"
msgstr ""
#: kpilot/kpilot.cc:517
msgid "Select the kind of HotSync to perform next."
msgstr ""
#: kpilot/kpilot.cc:518
msgid ""
"Select the kind of HotSync to perform next. This applies only to the next "
"HotSync; to change the default, use the configuration dialog."
msgstr ""
#: kpilot/kpilot.cc:525
msgid "&HotSync"
msgstr ""
#: kpilot/kpilot.cc:528
msgid "Next HotSync will be normal HotSync."
msgstr ""
#: kpilot/kpilot.cc:529
msgid "Tell the daemon that the next HotSync should be a normal HotSync."
msgstr ""
#: kpilot/kpilot.cc:533
msgid "Full&Sync"
msgstr ""
#: kpilot/kpilot.cc:536
msgid "Next HotSync will be a FullSync."
msgstr ""
#: kpilot/kpilot.cc:537
msgid ""
"Tell the daemon that the next HotSync should be a FullSync (check data on both "
"sides)."
msgstr ""
#: kpilot/kpilot.cc:541
msgid "&Backup"
msgstr ""
#: kpilot/kpilot.cc:544 kpilot/kpilot.cc:560
msgid "Next HotSync will be backup."
msgstr ""
#: kpilot/kpilot.cc:545
msgid ""
"Tell the daemon that the next HotSync should back up the Handheld to the PC."
msgstr ""
#: kpilot/kpilot.cc:549
#, fuzzy
msgid "&Restore"
msgstr "ស្ដារ"
#: kpilot/kpilot.cc:552
msgid "Next HotSync will be restore."
msgstr ""
#: kpilot/kpilot.cc:553
msgid ""
"Tell the daemon that the next HotSync should restore the Handheld from data on "
"the PC."
msgstr ""
#: kpilot/kpilot.cc:561
msgid ""
"Tell the daemon that the next HotSync should copy all data from the Handheld to "
"the PC, overwriting entries on the PC."
msgstr ""
#: kpilot/kpilot.cc:569
msgid "Next HotSync will copy PC to Handheld."
msgstr ""
#: kpilot/kpilot.cc:570
msgid ""
"Tell the daemon that the next HotSync should copy all data from the PC to the "
"Handheld, overwriting entries on the Handheld."
msgstr ""
#: kpilot/kpilot.cc:577
msgid "&List Only"
msgstr ""
#: kpilot/kpilot.cc:580
msgid "Next HotSync will list databases."
msgstr ""
#: kpilot/kpilot.cc:581
msgid ""
"Tell the daemon that the next HotSync should just list the files on the "
"Handheld and do nothing else."
msgstr ""
#: kpilot/kpilot.cc:588
msgid "Rese&t Link"
msgstr ""
#: kpilot/kpilot.cc:591
msgid "Reset the device connection."
msgstr ""
#: kpilot/kpilot.cc:592
msgid "Try to reset the daemon and its connection to the Handheld."
msgstr ""
#: kpilot/kpilot.cc:597
msgid "Quit KPilot, (and stop the daemon if configured that way)."
msgstr ""
#: kpilot/kpilot.cc:613
msgid "Configuration &Wizard..."
msgstr ""
#: kpilot/kpilot.cc:616
msgid "Configure KPilot using the configuration wizard."
msgstr ""
#: kpilot/kpilot.cc:851
msgid ""
"The library containing the configuration wizard for KPilot could not be loaded, "
"and the wizard is not available. Please try to use the regular configuration "
"dialog."
msgstr ""
#: kpilot/kpilot.cc:854
msgid "Wizard Not Available"
msgstr ""
#: kpilot/kpilot.cc:898
msgid "Changed username to `%1'."
msgstr ""
#: kpilot/kpilot.cc:927
msgid ""
"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
"busy)."
msgstr ""
#: kpilot/kpilot.cc:951
msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
msgstr ""
#: kpilot/kpilot.cc:991
msgid "Setup the Pilot device, conduits and other parameters"
msgstr ""
#: kpilot/kpilot.cc:1015
msgid "KPilot"
msgstr ""
#: kpilot/kpilot.cc:1030 kpilot/kpilot.cc:1032
msgid "Core and conduits developer"
msgstr ""
#: kpilot/kpilot.cc:1034
msgid "VCal conduit"
msgstr ""
#: kpilot/kpilot.cc:1035
msgid "Abbrowser conduit"
msgstr ""
#: kpilot/kpilot.cc:1036
msgid "Expenses conduit"
msgstr ""
#: kpilot/kpilot.cc:1037
msgid "Notepad conduit, Bugfixer"
msgstr ""
#: kpilot/kpilot.cc:1041
msgid "XML GUI"
msgstr ""
#: kpilot/kpilot.cc:1044
msgid ".ui files"
msgstr ""
#: kpilot/kpilot.cc:1046
msgid "Bugfixer, coolness"
msgstr ""
#: kpilot/kpilot.cc:1048
msgid "VCalconduit state machine, CMake"
msgstr ""
#: kpilot/fileInstaller.cc:109
#, c-format
msgid "Cannot install %1"
msgstr ""
#: kpilot/fileInstaller.cc:110
msgid ""
"Only PalmOS database files (like *.pdb and *.prc) can be installed by the file "
"installer."
msgstr ""
#: kpilot/main-test.cc:66
msgid "Path to Pilot device node"
msgstr ""
#: kpilot/main-test.cc:69
msgid "List DBs"
msgstr ""
#: kpilot/main-test.cc:71
msgid "Backup Pilot to <dest dir>"
msgstr ""
#: kpilot/main-test.cc:73
msgid "Restore Pilot from backup"
msgstr ""
#: kpilot/main-test.cc:76
msgid "Run conduit from desktop file <filename>"
msgstr ""
#: kpilot/main-test.cc:80
msgid "Run a specific check (with the device)"
msgstr ""
#: kpilot/main-test.cc:83
msgid "Show KPilot configuration information"
msgstr ""
#: kpilot/main-test.cc:86
msgid "Set the debug level"
msgstr ""
#: kpilot/main-test.cc:94
msgid "*Really* run the conduit, not in test mode."
msgstr ""
#: kpilot/main-test.cc:98
msgid "Run the conduit in file-test mode."
msgstr ""
#: kpilot/main-test.cc:101
msgid "Copy Pilot to Desktop."
msgstr ""
#: kpilot/main-test.cc:104
msgid "Copy Desktop to Pilot."
msgstr ""
#: kpilot/main-test.cc:107
msgid "Repeated perform action - only useful for --list"
msgstr ""
#: kpilot/main-test.cc:347
msgid "KPilotTest"
msgstr ""
#: kpilot/main-test.cc:352
msgid "KPilot Maintainer"
msgstr ""
#. i18n: file ./conduits/null/setup_base.ui line 68
#: kpilot/main-test.cc:357 rc.cpp:6 rc.cpp:21 rc.cpp:33 rc.cpp:78 rc.cpp:207
#: rc.cpp:222 rc.cpp:304 rc.cpp:592 rc.cpp:745 rc.cpp:835 rc.cpp:844
#: rc.cpp:910
#, fuzzy, no-c-format
msgid "General"
msgstr "ទូទៅ"
#: kpilot/main-test.cc:359
msgid "Conduit Actions"
msgstr ""
#: kpilot/addressWidget.cc:187
msgid "There are still %1 address editing windows open."
msgstr ""
#: kpilot/addressWidget.cc:191
#, c-format
msgid ""
"_n: There is still an address editing window open.\n"
"There are still %n address editing windows open."
msgstr ""
#: kpilot/addressWidget.cc:224
msgid "<qt>Select the category of addresses to display here.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:237
msgid ""
"<qt>This list displays all the addresses in the selected category. Click on one "
"to display it to the right.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:241
msgid "Address info:"
msgstr ""
#: kpilot/addressWidget.cc:255
msgid "<qt>You can edit an address when it is selected.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:263
msgid "<qt>Add a new address to the address book.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:264
msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
msgstr ""
#: kpilot/addressWidget.cc:274
msgid "<qt>Delete the selected address from the address book.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:277
msgid ""
"_: Export addresses to file\n"
"Export..."
msgstr ""
#: kpilot/addressWidget.cc:281
msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
msgstr ""
#: kpilot/addressWidget.cc:480
msgid ""
"You cannot add addresses to the address book until you have done a HotSync at "
"least once to retrieve the database layout from your Pilot."
msgstr ""
#: kpilot/addressWidget.cc:483
msgid "Cannot Add New Address"
msgstr ""
#: kpilot/addressWidget.cc:677
msgid "Export All Addresses"
msgstr ""
#: kpilot/addressWidget.cc:678
#, c-format
msgid "Export Address Category %1"
msgstr ""
#: kpilot/addressWidget.cc:696
msgid "The file <i>%1</i> exists. Overwrite?"
msgstr ""
#: kpilot/addressWidget.cc:697
#, fuzzy
msgid "Overwrite File?"
msgstr "សរសេរ​ជាន់​លើ​ឯកសារឬ ?"
#: kpilot/addressWidget.cc:710
msgid "The file <i>%1</i> could not be opened for writing."
msgstr ""
#. i18n: file ./conduits/null/setup_base.ui line 33
#: rc.cpp:3 rc.cpp:841
#, no-c-format
msgid "Null-Conduit Options"
msgstr ""
#. i18n: file ./conduits/null/setup_base.ui line 85
#: rc.cpp:9 rc.cpp:847
#, no-c-format
msgid "KPilot was here."
msgstr ""
#. i18n: file ./conduits/null/setup_base.ui line 88
#: rc.cpp:12 rc.cpp:850
#, no-c-format
msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
msgstr ""
#. i18n: file ./conduits/null/setup_base.ui line 96
#: rc.cpp:15 rc.cpp:853
#, no-c-format
msgid "&Log message:"
msgstr ""
#. i18n: file ./conduits/memofileconduit/setup_base.ui line 33
#: rc.cpp:18
#, no-c-format
msgid "Memofile Conduit Options"
msgstr ""
#. i18n: file ./conduits/memofileconduit/setup_base.ui line 96
#: rc.cpp:24
#, no-c-format
msgid "Sync private records:"
msgstr ""
#. i18n: file ./conduits/memofileconduit/setup_base.ui line 104
#: rc.cpp:27
#, no-c-format
msgid "Memos directory:"
msgstr ""
#. i18n: file ./conduits/memofileconduit/setup_base.ui line 115
#: rc.cpp:30
#, no-c-format
msgid "Select the directory you want to store your PDA's memos in"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 63
#: rc.cpp:36 rc.cpp:42
#, no-c-format
msgid ""
"<qt>Enter here, or select by clicking the file picker button, the location and "
"file name of the output file used to store the handheld's system "
"information.</qt>"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 71
#: rc.cpp:39
#, no-c-format
msgid "Output &file:"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 85
#: rc.cpp:45
#, no-c-format
msgid "Type of Output"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 96
#: rc.cpp:48
#, no-c-format
msgid "&HTML"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 102
#: rc.cpp:51
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as a HTML "
"document.</qt>"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 110
#: rc.cpp:54
#, no-c-format
msgid "Te&xt file"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 113
#: rc.cpp:57
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as a text "
"document.</qt>"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 124
#: rc.cpp:60
#, no-c-format
msgid ""
"<qt>Enter here, or select by clicking on the file picker button, the location "
"of the template to be used if you select the Custom template option.</qt>"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 132
#: rc.cpp:63
#, no-c-format
msgid "&Custom template:"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 135
#: rc.cpp:66
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as defined by a "
"custom template. Enter the location of the template in the edit box, or select "
"it clicking on the file picker button.</qt>"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 147
#: rc.cpp:69
#, no-c-format
msgid "Parts Included"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 173
#: rc.cpp:72
#, no-c-format
msgid "Output Type"
msgstr ""
#. i18n: file ./conduits/sysinfoconduit/sysinfo-setup_dialog.ui line 189
#: rc.cpp:75
#, no-c-format
msgid ""
"<qt>Check on this list the types of information about your system and handheld "
"you want to display in the output file.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 49
#: rc.cpp:81
#, fuzzy, no-c-format
msgid "Sync"
msgstr "ធ្វើ​សមកាលកម្ម"
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 52
#: rc.cpp:84
#, no-c-format
msgid "Select how often AvantGo should be synchronised"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 72
#: rc.cpp:87
#, no-c-format
msgid "&Every sync"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 78
#: rc.cpp:90
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync. To "
"perform a successful synchronization, you need to have access to the MAL server "
"during the HotSync.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 86
#: rc.cpp:93
#, no-c-format
msgid "Once per &hour"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 92
#: rc.cpp:96
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync that "
"is at least one hour after the previous MAL sync. To perform a successful "
"synchronization, you need to have access to the MAL server during the "
"HotSync.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 100
#: rc.cpp:99
#, no-c-format
msgid "Once a &day"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 103
#: rc.cpp:102
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync that "
"is at least one day after the previous MAL sync. To perform a successful "
"synchronization, you need to have access to the MAL server during the "
"HotSync.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 111
#: rc.cpp:105
#, no-c-format
msgid "Once a &week"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 114
#: rc.cpp:108
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync that "
"is at least one week after the previous MAL sync. To perform a successful "
"synchronization, you need to have access to the MAL server during the "
"HotSync.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 122
#: rc.cpp:111
#, no-c-format
msgid "Once a &month"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 125
#: rc.cpp:114
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync that "
"is at least one month after the previous MAL sync. To perform a successful "
"synchronization, you need to have access to the MAL server during the "
"HotSync.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 154
#: rc.cpp:117
#, fuzzy, no-c-format
msgid "Proxy"
msgstr "ប្រូកស៊ី"
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 168
#: rc.cpp:120
#, no-c-format
msgid "Proxy Type"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 185
#: rc.cpp:123
#, no-c-format
msgid "&No proxy"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 191
#: rc.cpp:126
#, no-c-format
msgid ""
"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
"this option if you connect to the internet directly.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 199
#: rc.cpp:129
#, no-c-format
msgid "&HTTP proxy"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 202
#: rc.cpp:132
#, no-c-format
msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 210
#: rc.cpp:135
#, no-c-format
msgid "&SOCKS proxy"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 213
#: rc.cpp:138
#, no-c-format
msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 226
#: rc.cpp:141
#, fuzzy, no-c-format
msgid "Server Information"
msgstr "ព័ត៌មាន​របស់​ម៉ាស៊ីន​បម្រើ"
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 260
#: rc.cpp:144 rc.cpp:195
#, no-c-format
msgid "Custom &port:"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 263
#: rc.cpp:147
#, no-c-format
msgid "Check this box to use a non-standard proxy port."
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 271
#: rc.cpp:150
#, no-c-format
msgid "Ser&ver name:"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 277
#: rc.cpp:153 rc.cpp:156
#, no-c-format
msgid ""
"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy server "
"to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar.com</i> "
"or <i>http://foo.bar.com:8080</i>).</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 305
#: rc.cpp:159
#, no-c-format
msgid ""
"<qt>Enter the port you want KPilot to use when connecting to your proxy server "
"here.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 316
#: rc.cpp:162
#, no-c-format
msgid ""
"<qt>If your proxy requires authentication, enter your password here.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 324
#: rc.cpp:165 rc.cpp:174
#, no-c-format
msgid ""
"<qt>If your proxy requires authentication, enter your username here.</qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 332
#: rc.cpp:168 rc.cpp:198
#, fuzzy, no-c-format
msgid "&Password:"
msgstr "ពាក្យ​សម្ងាត់ ៖"
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 343
#: rc.cpp:171 rc.cpp:201
#, no-c-format
msgid "&User name:"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 371
#: rc.cpp:177 rc.cpp:183
#, no-c-format
msgid ""
"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
"separated with commas, e.g: "
"<br><i>localhost,127.0.0.1,.lan</i><qt>"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 379
#: rc.cpp:180
#, no-c-format
msgid "N&o proxy for:"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 414
#: rc.cpp:186
#, no-c-format
msgid "MAL Server"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 434
#: rc.cpp:189
#, no-c-format
msgid "MAL Server Information"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 451
#: rc.cpp:192
#, no-c-format
msgid "&MAL server name:"
msgstr ""
#. i18n: file ./conduits/malconduit/mal-setup_dialog.ui line 574
#: rc.cpp:204
#, no-c-format
msgid ""
"<qt>There is currently <b>no way to set server parameters on the desktop</b>"
"; you need to use the <i>MobileLink</i> or <i>AGConnect</i> "
"application on the handheld device. </qt>"
msgstr ""
#. i18n: file ./conduits/knotes/setup_base.ui line 45
#: rc.cpp:210
#, no-c-format
msgid "Delete KNote when Pilot memo is deleted"
msgstr ""
#. i18n: file ./conduits/knotes/setup_base.ui line 51
#: rc.cpp:213
#, no-c-format
msgid ""
"<qt>Check this box if you wish to delete notes from KNotes automatically when "
"the corresponding Pilot memo is deleted. Use this option with care, as the "
"notes you want to keep in the handheld and in the desktop are not necessarily "
"the same.</qt>"
msgstr ""
#. i18n: file ./conduits/knotes/setup_base.ui line 59
#: rc.cpp:216
#, no-c-format
msgid "Suppress delete-confirmation in KNotes"
msgstr ""
#. i18n: file ./conduits/knotes/setup_base.ui line 62
#: rc.cpp:219
#, no-c-format
msgid ""
"<qt>Check this box if you wish to delete notes from KNotes, without "
"confirmation, when the corresponding Pilot memo is deleted. Use this option "
"only if you want to keep the same notes in the handheld and in the PC.</qt>"
msgstr ""
#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 63
#: rc.cpp:225
#, fuzzy, no-c-format
msgid "Direction"
msgstr "ទិស"
#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 80
#: rc.cpp:228
#, no-c-format
msgid "Set the &handheld time from the time on the PC"
msgstr ""
#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 86
#: rc.cpp:231
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the handheld time with the PC time, by "
"using the PC time on both.</qt>"
msgstr ""
#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 97
#: rc.cpp:234
#, no-c-format
msgid "Set the &PC time from the time on the handheld"
msgstr ""
#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 100
#: rc.cpp:237
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the handheld time with the PC time, by "
"using the handheld time on both.</qt>"
msgstr ""
#. i18n: file ./conduits/timeconduit/time-setup_dialog.ui line 110
#: rc.cpp:240
#, no-c-format
msgid ""
"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so this "
"conduit will be skipped for handhelds that run either of these operating "
"systems.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 18
#: rc.cpp:243 rc.cpp:246
#, no-c-format
msgid "KPilot Custom Fields"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 35
#: rc.cpp:249
#, no-c-format
msgid ""
"On your handheld, each address also provides four custom fields for your "
"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
"just store them as a custom field on your PC with no special meaning. In the "
"last case, you can change the values here. Note, however, that for all other "
"settings the values entered here will have no effect."
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 46
#: rc.cpp:252
#, no-c-format
msgid "Custom &3:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 52
#: rc.cpp:255 rc.cpp:264
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the third custom field here. Using KPilot, you "
"can synchronize these values with the handheld's Address application custom "
"fields.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 60
#: rc.cpp:258
#, no-c-format
msgid "Custom &4:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 66
#: rc.cpp:261 rc.cpp:270
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, you "
"can synchronize these values with the handheld's Address application custom "
"fields.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 82
#: rc.cpp:267 rc.cpp:276
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the second custom field here. Using KPilot, you "
"can synchronize these values with the handheld's Address application custom "
"fields.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 98
#: rc.cpp:273
#, no-c-format
msgid "Custom &2:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 112
#: rc.cpp:279
#, no-c-format
msgid "Custom &1:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 118
#: rc.cpp:282 rc.cpp:285
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the first custom field here. Using KPilot, you "
"can synchronize these values with the handheld's Address application custom "
"fields.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 142
#: rc.cpp:288
#, no-c-format
msgid ""
"If you let KPilot sync the handheld's custom fields as custom fields on the PC, "
"you can change the values here. Note, however, that for all other settings the "
"values entered here will have no effect."
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 158
#: rc.cpp:291
#, no-c-format
msgid "KPilot's Private (meta-sync) Settings"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 169
#: rc.cpp:294
#, no-c-format
msgid "Record&ID:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 180
#: rc.cpp:297
#, no-c-format
msgid "Sync &flag:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/KPilotCustomFieldEditor.ui line 226
#: rc.cpp:300
#, no-c-format
msgid ""
"These values indicate the state of the record for KPilot, and connect an entry "
"on the handheld with an entry on the PC.\n"
"Do NOT change these values: doing so will almost certainly result in data loss "
"when you next do a sync."
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 66
#: rc.cpp:307 rc.cpp:913
#, no-c-format
msgid "Sync Destination"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 77
#: rc.cpp:310
#, no-c-format
msgid "&Standard addressbook"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 80
#: rc.cpp:313
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with KDE's standard addressbook (i.e. the "
"addressbook that you edit in KAddressBook, and which you use in KMail)</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 91
#: rc.cpp:316
#, no-c-format
msgid "vCard &file:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 94
#: rc.cpp:319
#, no-c-format
msgid ""
"<qt>Select this option to use a specific address book file, instead of the "
"standard KDE address book. This file must be in the vCard format (.vcf). Type "
"the location of this file in the edit box or select it clicking the file picker "
"button.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 113
#: rc.cpp:322
#, no-c-format
msgid ""
"<qt>Enter the vCard file name here or select it by clicking the file picker "
"button. vCard is a standard format for exchanging contact information. </qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 123
#: rc.cpp:325
#, no-c-format
msgid "Store &archived records in the KDE addressbook"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 126
#: rc.cpp:328
#, no-c-format
msgid ""
"<qt>If you delete an address on your handheld, you can determine if it should "
"be archived on the PC. If you check that and this checkbox, the address will be "
"added to your addressbook, but no longer synchronized with the handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 136
#: rc.cpp:331 rc.cpp:703 rc.cpp:938
#, no-c-format
msgid "Conflicts"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 166
#: rc.cpp:337 rc.cpp:941 rc.cpp:1049
#, no-c-format
msgid "Conflict &resolution:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 172
#: rc.cpp:340 rc.cpp:364
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited both "
"on your handheld and on the PC) are resolved. Possibly values are \"Use "
"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" to "
"allow the entries to be different, \"PC overrides\", \"Handheld overrides\", "
"\"Use values from last sync\" and \"Use both entries\" to create a new entry on "
"both the PC and handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 178
#: rc.cpp:343 rc.cpp:944
#, no-c-format
msgid "Use KPilot's Global Setting"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 183
#: rc.cpp:346 rc.cpp:947 rc.cpp:1028
#, no-c-format
msgid "Ask User"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 188
#: rc.cpp:349 rc.cpp:950 rc.cpp:1031
#, fuzzy, no-c-format
msgid "Do Nothing"
msgstr "មិន​ធ្វើ​អ្វី​ទាំង​អស់"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 193
#: rc.cpp:352 rc.cpp:953 rc.cpp:1034
#, no-c-format
msgid "Handheld Overrides"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 198
#: rc.cpp:355 rc.cpp:956 rc.cpp:1037
#, no-c-format
msgid "PC Overrides"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 203
#: rc.cpp:358 rc.cpp:959 rc.cpp:1040
#, no-c-format
msgid "Values From Last Sync (if possible)"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 208
#: rc.cpp:361 rc.cpp:962 rc.cpp:1043
#, no-c-format
msgid "Use Both Entries"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 226
#: rc.cpp:367
#, no-c-format
msgid ""
"<p>Select the default action if an event was modified on both sides here. </p>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 258
#: rc.cpp:370
#, fuzzy, no-c-format
msgid "Fields"
msgstr "វាល"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 275
#: rc.cpp:373
#, no-c-format
msgid "Handheld other phone:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 278
#: rc.cpp:376 rc.cpp:403
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Pilot's "
"&quot;Other&quot; phone here.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 284
#: rc.cpp:379
#, no-c-format
msgid "Other Phone"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 289
#: rc.cpp:382
#, no-c-format
msgid "Assistant"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 294
#: rc.cpp:385 rc.cpp:430
#, fuzzy, no-c-format
msgid "Business Fax"
msgstr "ទូរសារជំនួញ"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 299
#: rc.cpp:388
#, fuzzy, no-c-format
msgid "Car Phone"
msgstr "ទូរស័ព្ទ​​រថយន្ត"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 304
#: rc.cpp:391
#, no-c-format
msgid "Email 2"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 309
#: rc.cpp:394 rc.cpp:427
#, fuzzy, no-c-format
msgid "Home Fax"
msgstr "ទូរសារ​នៅ​ផ្ទះ"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 314
#: rc.cpp:397
#, no-c-format
msgid "Telex"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 319
#: rc.cpp:400
#, no-c-format
msgid "TTY/TTD Phone"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 342
#: rc.cpp:406
#, no-c-format
msgid "Handheld street address:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 345
#: rc.cpp:409 rc.cpp:418
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Pilot's Street "
"Address here.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 351
#: rc.cpp:412
#, no-c-format
msgid "Preferred, then Home Address"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 356
#: rc.cpp:415
#, no-c-format
msgid "Preferred, then Business Address"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 371
#: rc.cpp:421
#, no-c-format
msgid "Handheld fax:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 374
#: rc.cpp:424 rc.cpp:433
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Fax number from "
"the Pilot here.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 419
#: rc.cpp:436
#, fuzzy, no-c-format
msgid "Custom Fields"
msgstr "វាល​ផ្ទាល់ខ្លួន"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 438
#: rc.cpp:439
#, no-c-format
msgid "Handheld custom field 1:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 441
#: rc.cpp:442 rc.cpp:475
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given by "
"your use of the first custom field on your handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 449
#: rc.cpp:445
#, no-c-format
msgid "Handheld custom field 2:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 452
#: rc.cpp:448 rc.cpp:490
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given by "
"your use of the second custom field on your handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 460
#: rc.cpp:451
#, no-c-format
msgid "Handheld custom field 3:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 463
#: rc.cpp:454 rc.cpp:505
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given by "
"your use of the third custom field on your handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 471
#: rc.cpp:457
#, no-c-format
msgid "Handheld custom field 4:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 474
#: rc.cpp:460 rc.cpp:520
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given by "
"your use of the fourth custom field on your handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 480
#: rc.cpp:463 rc.cpp:478 rc.cpp:493 rc.cpp:508
#, no-c-format
msgid "Store as Custom Field"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 485
#: rc.cpp:466 rc.cpp:481 rc.cpp:496 rc.cpp:511
#, no-c-format
msgid "Birthdate"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 490
#: rc.cpp:469 rc.cpp:484 rc.cpp:499 rc.cpp:514
#, fuzzy, no-c-format
msgid "URL"
msgstr "URL"
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 495
#: rc.cpp:472
#, no-c-format
msgid "IM Address (ICQ, MS, ...)"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 531
#: rc.cpp:487 rc.cpp:502 rc.cpp:517
#, no-c-format
msgid "IM Address (ICQ, MSN, ...)"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 640
#: rc.cpp:523
#, no-c-format
msgid "Date &format:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 646
#: rc.cpp:526 rc.cpp:550
#, no-c-format
msgid ""
"<qt>Select the birthdate format here, if you selected \"birthdate\" for any of "
"the custom fields above. Possible placeholders are:"
"<br> %d for the day, %m for the month, %y for the two-digit year, %Y for the "
"four-digit year. For example, %d.%m.%Y would generate a date like 27.3.1952, "
"while %m/%d/%y would write the same date as 03/27/52. </qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 652
#: rc.cpp:529
#, no-c-format
msgid "Locale Settings"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 657
#: rc.cpp:532
#, no-c-format
msgid "%d.%m.%Y"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 662
#: rc.cpp:535
#, no-c-format
msgid "%d.%m.%y"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 667
#: rc.cpp:538
#, no-c-format
msgid "%d/%m/%Y"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 672
#: rc.cpp:541
#, no-c-format
msgid "%d/%m/%y"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 677
#: rc.cpp:544
#, no-c-format
msgid "%m/%d/%Y"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/kaddressbookConduit.ui line 682
#: rc.cpp:547
#, no-c-format
msgid "%m/%d/%y"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 16
#: rc.cpp:553
#, no-c-format
msgid "widget2"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 27
#: rc.cpp:556
#, no-c-format
msgid ""
"The following record was edited both on the handheld and on the PC. Please "
"choose which values shall be synced:"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 36
#: rc.cpp:559
#, fuzzy, no-c-format
msgid "Field"
msgstr "វាល"
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 55
#: rc.cpp:562
#, no-c-format
msgid ""
"<qt>Use this list to resolve, field by field, the conflicts created when a "
"record was edited both on the handheld and on the PC. For each record, the "
"different values from the last sync, the handheld and PC are displayed for each "
"field, allowing you to choose the desired value.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 63
#: rc.cpp:565
#, no-c-format
msgid ""
"Line breaks in any of the entries are denoted by a \" | \" (without the "
"quotes)."
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 85
#: rc.cpp:568
#, no-c-format
msgid "&Keep Both"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 88
#: rc.cpp:571
#, no-c-format
msgid ""
"<qt>Click this button to use both values, resulting in the duplication of the "
"record.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 96
#: rc.cpp:574
#, no-c-format
msgid "&PC Values"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 99
#: rc.cpp:577
#, no-c-format
msgid ""
"<qt>Click this button to use the PC values for synchronizing all conflicting "
"fields in this record.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 107
#: rc.cpp:580
#, no-c-format
msgid "&Last Sync Values"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 110
#: rc.cpp:583
#, no-c-format
msgid ""
"<qt>Click this button to use the last sync values (old values) for "
"synchronizing all conflicting fields in this record.</qt>"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 118
#: rc.cpp:586
#, no-c-format
msgid "&Handheld Values"
msgstr ""
#. i18n: file ./conduits/abbrowserconduit/resolutionDialog_base.ui line 121
#: rc.cpp:589
#, no-c-format
msgid ""
"<qt>Click this button to use the handheld values for synchronizing all "
"conflicting fields in this record.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 54
#: rc.cpp:595
#, no-c-format
msgid "&Text files:"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 60
#: rc.cpp:598 rc.cpp:607
#, no-c-format
msgid ""
"<qt>Enter here, or select clicking the file picker button, the name and "
"location of the folder used to find and synchronize text files. All files with "
"extension .txt located in this folder will be synced to Palm DOC databases in "
"your handheld.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 68
#: rc.cpp:601
#, no-c-format
msgid "Local co&py:"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 74
#: rc.cpp:604
#, no-c-format
msgid ""
"<qt>Check this box if you want to save a copy of the Palm DOC databases (.pdb "
"files) on your PC.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 90
#: rc.cpp:610
#, no-c-format
msgid "Synchronization Mode"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 107
#: rc.cpp:613
#, no-c-format
msgid "Sync only P&C to PDA"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 113
#: rc.cpp:616
#, no-c-format
msgid ""
"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
"databases in your handheld. Palm DOC databases modified in the handheld will "
"not be converted to text files, but texts changed in the PC will be converted "
"to the Palm DOC databases.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 121
#: rc.cpp:619
#, no-c-format
msgid "Sync only P&DA to PC"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 124
#: rc.cpp:622
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the changes made to Palm DOC databases in "
"your handheld to the PC text files. Palm DOC databases modified in the handheld "
"will be converted to text files, but texts changed in the PC will not be "
"converted to the Palm DOC databases.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 132
#: rc.cpp:625
#, no-c-format
msgid "Sync &all"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 141
#: rc.cpp:628
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
"databases in your handheld. Palm DOC databases modified in the handheld will be "
"converted to text files, and texts changed in the PC will be converted to the "
"Palm DOC databases, keeping both versions in sync.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 168
#: rc.cpp:631
#, no-c-format
msgid ""
"<qt>Enter here, or select clicking the file picker button, the name and "
"location of the folder where copies of the handheld databases are kept (.pdb "
"files). Local copies are only made if the box is checked as well.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 178
#: rc.cpp:634 rc.cpp:778
#, no-c-format
msgid "PC -> Handheld"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 189
#: rc.cpp:637 rc.cpp:793
#, no-c-format
msgid "&Compress"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 195
#: rc.cpp:640 rc.cpp:796
#, no-c-format
msgid ""
"Check this box, if the text should be compressed on the handheld to save "
"memory. Most doc reader on the handheld support compressed texts."
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 198
#: rc.cpp:643
#, no-c-format
msgid ""
"<qt>The Palm DOC format supports compressing the text to save memory. Check "
"this box to enable text compression, so the resulting Palm DOC database will "
"consume about 50% less memory than in uncompressed state. Almost all DOC "
"readers on the Palm support compressed texts.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 206
#: rc.cpp:646 rc.cpp:802
#, no-c-format
msgid "Convert &bookmarks"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 212
#: rc.cpp:649
#, no-c-format
msgid ""
"<qt>Check this box to enable bookmark creation when converting text files to "
"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
"bookmark, it is necessary to to provide the location in the text where the "
"bookmark should be set and the bookmark title, in at least one of the formats "
"listed below.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 237
#: rc.cpp:652 rc.cpp:781
#, no-c-format
msgid "&Inline tags in text"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 243
#: rc.cpp:655
#, no-c-format
msgid ""
"Check this box to create bookmarks from inline tags in the text. The inline tag "
"consist of tags in the form <* bookmarktext *>. The bookmark location is set "
"using the location of the inline tag in the text, and the name is the text "
"between the <* and the *>. The inline tag (<*...*>) will be removed from the "
"text."
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 251
#: rc.cpp:658 rc.cpp:775
#, fuzzy, no-c-format
msgid "&Encoding:"
msgstr "ការ​បម្លែង​ជា​កូដ ៖"
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 262
#: rc.cpp:661 rc.cpp:787
#, no-c-format
msgid "&Tags at end of text"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 265
#: rc.cpp:664
#, no-c-format
msgid ""
"Check this box to convert tags of the form <bookmarkname> "
"at the end of the text to bookmarks. The text inside the tag (\"bookmarkname\") "
"will be searched in the text, and whenever found, a bookmark will be set there. "
"The endtags <...> will then be removed from the end of the text."
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 273
#: rc.cpp:667 rc.cpp:808
#, no-c-format
msgid "Regular &expressions in .bmk file"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 276
#: rc.cpp:670
#, no-c-format
msgid ""
"<qt>Check this box to use regular expressions in a file to search the text for "
"bookmarks. The file should have the same name as the text file, but should end "
"in .bmk instead of .txt (for instance, the regular expression file for "
"textname.txt should be textname.bmk). See the documentation for a description "
"of the format of the bmk file.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 291
#: rc.cpp:673 rc.cpp:814
#, no-c-format
msgid "Handheld -> PC"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 319
#: rc.cpp:676
#, no-c-format
msgid "Do not convert, if text unchanged (only bookmarks)"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 322
#: rc.cpp:679
#, no-c-format
msgid ""
"<qt>Check this box to avoid syncing the text on the handheld to the PC if you "
"only changed the bookmarks on the handheld (but not the text).</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 330
#: rc.cpp:682 rc.cpp:817
#, no-c-format
msgid "Convert Bookmarks"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 341
#: rc.cpp:685 rc.cpp:823
#, no-c-format
msgid "Do &not convert bookmarks"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 347
#: rc.cpp:688
#, no-c-format
msgid ""
"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or to "
"a bookmark file.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 355
#: rc.cpp:691
#, no-c-format
msgid "Convert into .bm &file"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 364
#: rc.cpp:694
#, no-c-format
msgid ""
"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
"file, in the bmk format (see more about this format in the documentation). The "
"resulting bookmark file shares the same filename as the resulting .txt file, "
"but ends in .bmk instead. This approach creates a clean text file and a "
"bookmark file.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 372
#: rc.cpp:697 rc.cpp:820
#, no-c-format
msgid "Convert as &inline tags"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 378
#: rc.cpp:700
#, no-c-format
msgid ""
"<qt>Check this box to convert the Palm DOC database bookmarks to inline tags, "
"in the form &lt;* BookmarkName *&gt;. These tags are inserted in the text in "
"the position marked by the bookmark, and the text inside the tag corresponds to "
"the bookmark name. Inline tags are easy to create, delete, move and edit.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 404
#: rc.cpp:709
#, no-c-format
msgid ""
"If the same text was changed on the PC and the handheld, which of the two "
"versions should be used as the new version?"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 407
#: rc.cpp:712
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
"is changed both in the handheld and in the computer. Therefore, the choice is "
"between working with the files out of sync, or discarding the changes in one of "
"them.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 418
#: rc.cpp:715
#, no-c-format
msgid "&No resolution"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 424
#: rc.cpp:718
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
"is changed both in the handheld and in the computer. Therefore, when conflicts "
"appear, the choice is between working with the files out of sync, or discarding "
"the changes in one of them. Select this option to prevent KPilot from "
"overwriting your modifications.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 432
#: rc.cpp:721
#, no-c-format
msgid "P&DA overrides"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 438
#: rc.cpp:724
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
"is changed both in the handheld and in the computer. Therefore, when conflicts "
"appear, the choice is between working with the files out of sync, or discarding "
"the changes in one of them. Select this option to make the PDA version "
"overwrite the PC version in case of conflict.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 446
#: rc.cpp:727
#, no-c-format
msgid "P&C overrides"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 452
#: rc.cpp:730
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
"is changed both in the handheld and in the computer. Therefore, when conflicts "
"appear, the choice is between working with the files out of sync, or discarding "
"the changes in one of them. Select this option to make the PC version overwrite "
"the PDA version in case of conflict.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 460
#: rc.cpp:733
#, no-c-format
msgid "&Ask the user"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 469
#: rc.cpp:736
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a text "
"is changed both in the handheld and in the computer. Therefore, when conflicts "
"appear, the choice is between working with the files out of sync, or discarding "
"the changes in one of them. Select this option to show the resolution dialog to "
"let the user decide on a case by case basis.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 479
#: rc.cpp:739
#, no-c-format
msgid "&Always show the resolution dialog"
msgstr ""
#. i18n: file ./conduits/docconduit/doc-setupdialog.ui line 482
#: rc.cpp:742
#, no-c-format
msgid ""
"<qt>Check this box to force the resolution dialog to appear even when there are "
"no conflicts.</qt>"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 47
#: rc.cpp:748
#, no-c-format
msgid "&PalmDOC file:"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 77
#: rc.cpp:754
#, no-c-format
msgid "Convert whole &folders"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 85
#: rc.cpp:757
#, no-c-format
msgid ""
"Folder where copies of the handheld databases are kept. You can install them to "
"any PalmOS handheld, and distribute these copies to other people (but beware of "
"copyright infringement)."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 93
#: rc.cpp:760
#, no-c-format
msgid "&Ask before overwriting files"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 101
#: rc.cpp:763
#, no-c-format
msgid "&Verbose messages"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 109
#: rc.cpp:766
#, no-c-format
msgid "Convert Text to PalmDOC"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 117
#: rc.cpp:769
#, no-c-format
msgid "Convert PalmDOC to Text"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 142
#: rc.cpp:772
#, no-c-format
msgid ""
"Enter the name of the folder where the text files reside on the PC. All files "
"with extension .txt will be synced to the handheld."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 236
#: rc.cpp:784
#, no-c-format
msgid ""
"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be set "
"at this position, and the text between the <* and the *> "
"will be used as bookmark name. The <*...*> will be removed from the text."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 247
#: rc.cpp:790
#, no-c-format
msgid ""
"Tags of the form <bookmarkname> at the end of the text will be used to search "
"the text for the pattern between the < and >. Whenever \"bookmarkname\" appears "
"in the text, a bookmark will be set there. The endtags <...> "
"will then be removed from the end of the text."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 264
#: rc.cpp:799
#, no-c-format
msgid ""
"The Palm doc format supports compressing the text to save memory. If you check "
"this box, the text will consume about 50% less memory than in uncompressed "
"state. Almost all DOC readers on the Palm support compressed texts."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 278
#: rc.cpp:805
#, no-c-format
msgid ""
"Do you want to convert bookmarks? Most doc readers support bookmarks. You have "
"to provide some information about where the bookmarks should be set and their "
"titles. Check at least one of the bookmark types below."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 289
#: rc.cpp:811
#, no-c-format
msgid ""
"Use regular expressions in a file textname.bmk (textname.txt is the filename of "
"the text) to search the text for bookmarks.See the documentation for a "
"description of the format of the bmk file."
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 386
#: rc.cpp:826
#, no-c-format
msgid "Convert as &end tags"
msgstr ""
#. i18n: file ./conduits/docconduit/kpalmdoc_dlgbase.ui line 394
#: rc.cpp:829
#, no-c-format
msgid "Convert into .bmk &file"
msgstr ""
#. i18n: file ./conduits/notepadconduit/notepad-setup.ui line 17
#: rc.cpp:832
#, no-c-format
msgid "Path to the directory to which the pictures should be exported."
msgstr ""
#. i18n: file ./conduits/notepadconduit/notepad-setup.ui line 65
#: rc.cpp:838
#, fuzzy, no-c-format
msgid "Output:"
msgstr "លទ្ធផល ៖"
#. i18n: file ./conduits/recordconduit/setup_base.ui line 107
#: rc.cpp:856
#, no-c-format
msgid "&Databases:"
msgstr ""
#. i18n: file ./conduits/recordconduit/setup_base.ui line 118
#: rc.cpp:859
#, no-c-format
msgid ""
"<qt>The Null-conduit can be attached to several databases, effectively "
"preventing them from Syncing. Enter the database names here.</qt>"
msgstr ""
#. i18n: file ./conduits/recordconduit/setup_base.ui line 143
#: rc.cpp:862
#, no-c-format
msgid "Simulate failure"
msgstr ""
#. i18n: file ./conduits/recordconduit/setup_base.ui line 146
#: rc.cpp:865
#, no-c-format
msgid "Force the conduit to simulate a failure to perform the HotSync."
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 34
#: rc.cpp:868
#, no-c-format
msgid "Send Mail"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 62
#: rc.cpp:871
#, no-c-format
msgid "Send method:"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 65
#: rc.cpp:874 rc.cpp:904
#, no-c-format
msgid ""
"<qt>Select the method KPilot will use to send the mail from your Handheld to "
"the recipients here. Depending on the method you choose, the other fields in "
"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
"method is through KMail.</qt>"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 73
#: rc.cpp:877
#, fuzzy, no-c-format
msgid "Email address:"
msgstr "អាសយដ្ឋាន​អ៊ីមែល ៖"
#. i18n: file ./conduits/popmail/setup-dialog.ui line 76
#: rc.cpp:880 rc.cpp:886
#, no-c-format
msgid "<qt>Enter the email address you want to send messages as here.</qt>"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 84
#: rc.cpp:883
#, no-c-format
msgid "$USER"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 95
#: rc.cpp:889
#, no-c-format
msgid "Signature file:"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 98
#: rc.cpp:892 rc.cpp:895
#, no-c-format
msgid ""
"<qt>If you want to add a signature file, enter the location of your signature "
"file (usually, <i>.signature</i>, located in your home folder) here, or select "
"it clicking the file picker button. The signature file contains the text that "
"is added to the end of your outgoing mail messages.</qt>"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 112
#: rc.cpp:898
#, no-c-format
msgid "Do Not Send Mail"
msgstr ""
#. i18n: file ./conduits/popmail/setup-dialog.ui line 117
#: rc.cpp:901
#, no-c-format
msgid "Use KMail"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 31
#: rc.cpp:907
#, no-c-format
msgid "Calendar-Conduit Options"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 105
#: rc.cpp:916
#, no-c-format
msgid "&Standard calendar"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 108
#: rc.cpp:919
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the calendar specified by the KDE "
"calendar settings.</qt>"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 119
#: rc.cpp:922
#, no-c-format
msgid "Calendar &file:"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 122
#: rc.cpp:925
#, no-c-format
msgid ""
"<qt>Select this option to use a specific calendar file, instead of the standard "
"KDE calendar. This file must be in the in the vCalendar or iCalendar format. "
"Enter the location of this file in the edit box or select it clicking the file "
"picker button.</qt>"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 141
#: rc.cpp:928
#, no-c-format
msgid ""
"<qt>Enter here the location and filename of the calendar file or select it "
"clicking the file picker button. This file must be in the iCalendar or "
"vCalendar format.</qt>"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 151
#: rc.cpp:931
#, no-c-format
msgid "Store &archived records in the KDE calendar"
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 155
#: rc.cpp:934
#, no-c-format
msgid ""
"When this box is checked, archived records will still\n"
"be saved in the calendar on the PC."
msgstr ""
#. i18n: file ./conduits/vcalconduit/korganizerConduit.ui line 233
#: rc.cpp:965
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited both "
"on your handheld and on the PC) are resolved. Possibly values are \"Use "
"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" to "
"allow the entries to be different, \"PC overrides\", \"Handheld overrides\", "
"\"Use values from last sync\" and \"Use both entries\" to create a new entry on "
"both the PC and handheld. Note that this does <i>not</i> "
"handle double-scheduling conflicts.</qt>"
msgstr ""
#. i18n: file ./kpilot/todoEditor_base.ui line 32
#: rc.cpp:968
#, fuzzy, no-c-format
msgid "&Description:"
msgstr "សេចក្ដី​ពណ៌នា ៖"
#. i18n: file ./kpilot/todoEditor_base.ui line 54
#: rc.cpp:971
#, no-c-format
msgid "&Note:"
msgstr ""
#. i18n: file ./kpilot/todoEditor_base.ui line 71
#: rc.cpp:974
#, no-c-format
msgid "Ca&tegory:"
msgstr ""
#. i18n: file ./kpilot/todoEditor_base.ui line 90
#: rc.cpp:977
#, fuzzy, no-c-format
msgid "&Priority:"
msgstr "អាទិភាព ៖"
#. i18n: file ./kpilot/todoEditor_base.ui line 104
#: rc.cpp:983
#, fuzzy, no-c-format
msgid "2"
msgstr "២"
#. i18n: file ./kpilot/todoEditor_base.ui line 109
#: rc.cpp:986
#, fuzzy, no-c-format
msgid "3"
msgstr "៣"
#. i18n: file ./kpilot/todoEditor_base.ui line 114
#: rc.cpp:989
#, fuzzy, no-c-format
msgid "4"
msgstr "៤"
#. i18n: file ./kpilot/todoEditor_base.ui line 119
#: rc.cpp:992
#, fuzzy, no-c-format
msgid "5"
msgstr "5"
#. i18n: file ./kpilot/todoEditor_base.ui line 147
#: rc.cpp:995
#, no-c-format
msgid "&Completed"
msgstr ""
#. i18n: file ./kpilot/todoEditor_base.ui line 155
#: rc.cpp:998
#, no-c-format
msgid "Has &end date:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 18
#: rc.cpp:1001 rc.cpp:1058 rc.cpp:1108 rc.cpp:1220 rc.cpp:1313
#, no-c-format
msgid "KPilot Options"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 32
#: rc.cpp:1004
#, no-c-format
msgid "Do full sync when chan&ging PCs"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 38
#: rc.cpp:1007
#, no-c-format
msgid ""
"<qt>Check this box to perform a full sync when your last sync was performed "
"with another PC or system, to guarantee the completeness of your data.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 44
#: rc.cpp:1010
#, no-c-format
msgid "HotSync (sync all changes)"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 49
#: rc.cpp:1013
#, no-c-format
msgid "FullSync (sync also unchanged records)"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 66
#: rc.cpp:1022
#, no-c-format
msgid ""
"<qt>Select in this list the synchronization type that KPilot will use as "
"default. Possible values are:"
"<br>\"HotSync\", to run all selected conduits, and sync the databases with a "
"modified flag set, updating the modified records only;"
"<br>\"FullSync\" to run all selected conduits, and sync all databases, reading "
"all records, and performing a full backup;"
"<br>\"Copy PC to handheld\" to run all conduits and sync all databases, but "
"instead of merging the information from both sources, copy the PC data to the "
"handheld;"
"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
"instead of merging the information from both sources, copy the handheld data to "
"the PC.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 74
#: rc.cpp:1025
#, no-c-format
msgid "&Default sync:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 132
#: rc.cpp:1046
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited both "
"on your handheld and on the PC) are resolved. Possibly values are \"Ask User\" "
"to let you decide case by case, \"Do Nothing\" to allow the entries to be "
"different, \"PC overrides\", \"Handheld overrides\", \"Use values from last "
"sync\" and \"Use both entries\" to create a new entry on both the PC and "
"handheld. Note that the conflict resolution option selected here can be "
"overridden by conduits that have their own conflict resolution "
"configuration.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 159
#: rc.cpp:1052
#, no-c-format
msgid "Do not sync when screensaver is active"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_sync.ui line 165
#: rc.cpp:1055
#, no-c-format
msgid ""
"<qt>Check this box to prevent KPilot from syncing your handheld while the "
"screensaver is active: this is a security measure to prevent others from "
"syncing <i>their</i> handhelds with your data. This option must be disabled "
"when you use a different desktop, since KPilot is not aware of screensavers "
"other than KDE's.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 33
#: rc.cpp:1061
#, no-c-format
msgid "Exit Options"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 44
#: rc.cpp:1064
#, no-c-format
msgid "S&top KPilot's system tray application on exit"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 47
#: rc.cpp:1067
#, no-c-format
msgid ""
"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
"KPilot started the daemon itself).</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 55
#: rc.cpp:1070
#, no-c-format
msgid "Quit &after HotSync"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 58
#: rc.cpp:1073
#, no-c-format
msgid ""
"<qt>Check this box to stop both KPilot and the KPilot daemon after the HotSync "
"finishes. This may be useful for systems where KPilot is started by the USB "
"daemon.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 68
#: rc.cpp:1076
#, fuzzy, no-c-format
msgid "Startup Options"
msgstr "ជម្រើស​ចាប់ផ្តើមឡើង"
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 79
#: rc.cpp:1079 rc.cpp:1214
#, no-c-format
msgid "&Start KPilot at login"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 82
#: rc.cpp:1082
#, no-c-format
msgid ""
"<qt>Check this box to start up the KPilot daemon every time you log in to "
"KDE.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 90
#: rc.cpp:1085
#, no-c-format
msgid "S&how KPilot in system tray"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_startup.ui line 93
#: rc.cpp:1088
#, no-c-format
msgid ""
"<qt>Check this box to place a Kpilot icon in the system tray, which shows the "
"daemon's status, and allows you to select the next sync type and to configure "
"KPilot.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 26
#: rc.cpp:1091
#, no-c-format
msgid ""
"Finally, you can configure KPilot specifically for some PIM applications, like "
"Kontact (KDE's integrated PIM application) or Evolution (GNOME's integrated PIM "
"application).\n"
"\n"
"Press \"Finish\" to setup KPilot according to the settings in this "
"configuration Wizard."
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 37
#: rc.cpp:1096
#, no-c-format
msgid "Set Default Values for Syncing With"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 48
#: rc.cpp:1099
#, no-c-format
msgid "&KDE-PIM suite (Kontact)"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 59
#: rc.cpp:1102
#, no-c-format
msgid "&GNOME-PIM (Evolution)"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_app.ui line 67
#: rc.cpp:1105
#, no-c-format
msgid "No sync, just backup"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 29
#: rc.cpp:1111
#, no-c-format
msgid "Backup Frequency"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 54
#: rc.cpp:1114
#, no-c-format
msgid "Do &backup:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 63
#: rc.cpp:1117
#, no-c-format
msgid "On every HotSync"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 68
#: rc.cpp:1120
#, no-c-format
msgid "On request only"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 90
#: rc.cpp:1123
#, fuzzy, no-c-format
msgid "Databases"
msgstr "មូលដ្ឋាន​​ទិន្នន័យ"
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 107
#: rc.cpp:1126
#, no-c-format
msgid "&No backup:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 113
#: rc.cpp:1129 rc.cpp:1138
#, no-c-format
msgid ""
"<qt>"
"<p>Enter the databases types you wish to exclude from the backup operation "
"here. Use this setting if backing up some databases crashes the handheld, or if "
"you do not want a backup of some databases (like AvantGo pages).</p>"
"<p>Entries with square brackets [] are <i>creator codes</i> like <tt>[lnch]</tt> "
"and can exclude a whole range of databases. Entries without the brackets list "
"database names, and may include shell-style wildcards, like <tt>*_a68k</tt>.</p>"
"</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 127
#: rc.cpp:1132
#, no-c-format
msgid "Not &restored:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 133
#: rc.cpp:1135 rc.cpp:1141
#, no-c-format
msgid ""
"<qt>"
"<p>Enter the databases types you wish to exclude from the restore operation "
"here (like AvantGo databases). They will be skipped even if they exist in the "
"set of backup databases on the handheld. If you still want to install an "
"ignored database to the handheld, you can always manually install it to the "
"handheld.</p>"
"<p>Entries with square brackets [] are <i>creator codes</i> like <tt>[lnch]</tt> "
"and can exclude a whole range of databases. Entries without the brackets list "
"database names, and may include shell-style wildcards, like <tt>*_a68k</tt>.</p>"
"</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 157
#: rc.cpp:1144 rc.cpp:1150
#, fuzzy, no-c-format
msgid "..."
msgstr "..."
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 160
#: rc.cpp:1147
#, no-c-format
msgid ""
"<qt>Click here to open the database selection dialog. This dialog allows you to "
"check the databases you want to exclude from the backup from a list.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 171
#: rc.cpp:1153
#, no-c-format
msgid ""
"<qt>Click here to open the database selection dialog. This dialog allows you to "
"select the databases you want to exclude from the restore operation from a "
"list.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 181
#: rc.cpp:1156
#, no-c-format
msgid "Run conduits durin&g a backup sync"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_backup.ui line 184
#: rc.cpp:1159
#, no-c-format
msgid ""
"<qt>Check this box to run the selected conduits before every backup. This makes "
"sure the backup is up to date with the last changes from your PC.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 24
#: rc.cpp:1162
#, no-c-format
msgid "This wizard will help you configure KPilot."
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 35
#: rc.cpp:1165
#, no-c-format
msgid ""
"As a first step, we need to determine the user name and how the handheld is "
"connected to the computer."
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 46
#: rc.cpp:1168
#, no-c-format
msgid "Handheld && User Name"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 62
#: rc.cpp:1171
#, no-c-format
msgid ""
"<p>You can either let KPilot detect these values automatically (for this you "
"need your handheld ready and connected to the PC) or enter them manually.</p>\n"
"<p>Please enter the username exactly as set on the handheld. </p>\n"
"<p>If setting the device type manually (i.e., if automatic detection did not "
"work for you), please look below for tips on choosing the right device name. "
"{0...n} means a number from 0 up to a very large number, though usually just "
"255.\n"
"<p>\n"
"Serial Port: an old method of connection, used primarily by the original line "
"of Palm Pilots, and various Palm-based cellphones. Device name will look like "
"/dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
"<p>\n"
"USB Port: A newer style of connection, used by most newer Palms, Handsprings, "
"and Sony Clies. Device name will look like /dev/ttyUSB{0...n} or "
"/dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD). On Linux, "
"definitely check both 0 and 1: newer devices tend to use 1; older devices tend "
"to use 0.</p>\n"
"<p>\n"
"Infrared: (pronounced infra-red) is a relatively slow connection type used "
"solely as a last resort. Device name will be /dev/ircomm0 or /dev/ttyS{0...n} "
"(Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
"<p>\n"
"Bluetooth: A new connection method, this is used almost exclusively on new, "
"high-end devices, like the Tungsten T3 or the Zire 72. Device name will be "
"/dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
"(FreeBSD).</p>\n"
"<p>\n"
"Network: This has not been tested by any of the KPilot developers themselves "
"(hardware donations always accepted!), but it has been reported that setting "
"the device to \"net:any\" will work for network-enabled devices. However, this "
"has also been known to lock KPilot up when doing anything other than just "
"syncing. Use it with caution.\n"
"</p>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 73
#: rc.cpp:1187
#, fuzzy, no-c-format
msgid "&Device:"
msgstr "ឧបករណ៍ ៖"
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 79
#: rc.cpp:1190 rc.cpp:1202
#, no-c-format
msgid ""
"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the "
"correct device. Use the button below to automatically detect the device. You "
"need write permission to successfully synchronize with the handheld.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 87
#: rc.cpp:1193
#, no-c-format
msgid "&Automatically Detect Handheld && User Name"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 90
#: rc.cpp:1196
#, no-c-format
msgid ""
"<qt>Click this button to open the detection dialog. The wizard will try to "
"automatically find and display the correct device and username for your "
"handheld. If the wizard cannot retrieve this information, check if you have "
"write permission for the device.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 98
#: rc.cpp:1199
#, no-c-format
msgid "/dev/pilot"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 109
#: rc.cpp:1205 rc.cpp:1211
#, no-c-format
msgid ""
"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
"setting, or use the button below to automatically detect it.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 117
#: rc.cpp:1208
#, no-c-format
msgid "User na&me:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigWizard_user.ui line 139
#: rc.cpp:1217
#, no-c-format
msgid ""
"<qt>Check this box to make the kpilot daemon load when you first log in until "
"you log out. That means (in theory), that you should not have to do anything "
"other than connect your handheld and push \"sync\", and kpilot will appear and "
"magically do your bidding. </qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 47
#: rc.cpp:1226
#, no-c-format
msgid "Make internal viewers &editable"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 53
#: rc.cpp:1229
#, no-c-format
msgid ""
"<qt>The internal viewers can be read only or editable. The editable mode allows "
"you to add new records, delete or edit the existing records and sync your "
"modifications back to the handheld. Check this box to set the internal viewers "
"to editable mode, uncheck to set them to read only mode.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 61
#: rc.cpp:1232
#, no-c-format
msgid "&Show private records"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 64
#: rc.cpp:1235
#, no-c-format
msgid ""
"<qt>Check this box to display in the internal viewers records that are marked "
"&quot;Private&quot; in the Pilot.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 85
#: rc.cpp:1241
#, no-c-format
msgid "Show as \"&Last, first\""
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 88
#: rc.cpp:1244
#, no-c-format
msgid ""
"<qt>Select this option to display addresses in the internal address viewer "
"sorted by last name, first name.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 96
#: rc.cpp:1247
#, no-c-format
msgid "Show as \"&Company, last\""
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 99
#: rc.cpp:1250
#, no-c-format
msgid ""
"<qt>Select this option to display addresses in the internal address viewer "
"sorted by company name, last name.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 121
#: rc.cpp:1253
#, no-c-format
msgid "&Use key field"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_viewers.ui line 124
#: rc.cpp:1256
#, no-c-format
msgid ""
"<qt>Check this box to combine all entries with the same last name in the "
"internal address viewer.</qt>"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 32
#: rc.cpp:1268
#, no-c-format
msgid "Database &name:"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 51
#: rc.cpp:1271
#, no-c-format
msgid "&Creator:"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 70
#: rc.cpp:1274
#, fuzzy, no-c-format
msgid "&Type:"
msgstr "ប្រភេទ ៖"
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 97
#: rc.cpp:1277
#, no-c-format
msgid "Database Flags"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 108
#: rc.cpp:1280
#, no-c-format
msgid "&Ressource database"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 116
#: rc.cpp:1283
#, no-c-format
msgid "Rea&d-only"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 124
#: rc.cpp:1286
#, no-c-format
msgid "Database is &backed up"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 132
#: rc.cpp:1289
#, no-c-format
msgid "Copy &protected"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 159
#: rc.cpp:1292
#, no-c-format
msgid "Misc Flags"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 187
#: rc.cpp:1295
#, no-c-format
msgid "Reset after &installation"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 195
#: rc.cpp:1298
#, no-c-format
msgid "E&xclude from sync"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 205
#: rc.cpp:1301
#, fuzzy, no-c-format
msgid "Time Stamps"
msgstr "ពេលវេលា"
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 224
#: rc.cpp:1304
#, no-c-format
msgid "Cr&eation time:"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 235
#: rc.cpp:1307
#, no-c-format
msgid "&Modification time:"
msgstr ""
#. i18n: file ./kpilot/dbFlagsEditor_base.ui line 246
#: rc.cpp:1310
#, no-c-format
msgid "Back&up time:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 29
#: rc.cpp:1316
#, no-c-format
msgid "Pilot &device:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 35
#: rc.cpp:1319 rc.cpp:1322
#, no-c-format
msgid ""
"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to the "
"correct device. You need write permission to successfully synchronize with the "
"handheld.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 51
#: rc.cpp:1325
#, fuzzy, no-c-format
msgid "&Speed:"
msgstr "ល្បឿន ៖"
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 57
#: rc.cpp:1328 rc.cpp:1349
#, no-c-format
msgid ""
"<qt>Select the speed of the serial connection to your handheld here. This has "
"no meaning for USB devices. For an older model, choose 9600. Newer models may "
"be able to handle speeds up to the maximum listed, 115200. You can experiment "
"with the connection speed: the manual suggests starting at a speed of 19200 and "
"trying faster speeds to see if they work.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 65
#: rc.cpp:1331 rc.cpp:1361
#, no-c-format
msgid ""
"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
"setting.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 88
#: rc.cpp:1334
#, no-c-format
msgid "9600"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 93
#: rc.cpp:1337
#, no-c-format
msgid "19200"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 98
#: rc.cpp:1340
#, no-c-format
msgid "38400"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 103
#: rc.cpp:1343
#, no-c-format
msgid "57600"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 108
#: rc.cpp:1346
#, no-c-format
msgid "115200"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 123
#: rc.cpp:1352
#, no-c-format
msgid "En&coding:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 129
#: rc.cpp:1355 rc.cpp:1364
#, no-c-format
msgid ""
"<qt>PalmOS devices are available in many different languages. If your device "
"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
"encoding here, in order to display special characters correctly.</qt>"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 137
#: rc.cpp:1358
#, no-c-format
msgid "Pilot &user:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 162
#: rc.cpp:1367
#, no-c-format
msgid "&Workarounds:"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 171
#: rc.cpp:1370
#, fuzzy, no-c-format
msgid "None"
msgstr "គ្មាន"
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 176
#: rc.cpp:1373
#, no-c-format
msgid "Zire 31, 72, Tungsten T5"
msgstr ""
#. i18n: file ./kpilot/kpilotConfigDialog_device.ui line 183
#: rc.cpp:1376
#, no-c-format
msgid ""
"<qt>Workarounds enable special handling for specific devices. Most devices do "
"not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten T5 <i>"
"do</i> have special needs, so if you are connecting such a device, please "
"select the workaround for them.</qt>"
msgstr ""
#. i18n: file ./kpilot/dbSelection_base.ui line 23
#: rc.cpp:1379
#, fuzzy, no-c-format
msgid "Database"
msgstr "មូលដ្ឋាន​ទិន្នន័យ"
#. i18n: file ./kpilot/dbSelection_base.ui line 60
#: rc.cpp:1385
#, fuzzy, no-c-format
msgid "&Add"
msgstr "បន្ថែម"
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 89
#: rc.cpp:1406
#, no-c-format
msgid "&Deleted"
msgstr ""
#. i18n: file ./kpilot/dbRecordEditor_base.ui line 97
#: rc.cpp:1409
#, fuzzy, no-c-format
msgid "Busy"
msgstr "រវល់"