You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-bs/messages/tdeadmin/kcmlilo.po

662 lines
25 KiB

# translation of kcmlilo.po to Bosnian
# translation of kcmlilo.po to Bosanski
# Bosnian translation
# Copyright (C) 2004, 2006 Free Software Foundation, Inc.
# Samir Marić <samir_maric@yahoo.se>, 2002.
# Vedran Ljubovic <vljubovic@smartnet.ba>, 2002, 2004, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: kcmlilo\n"
"POT-Creation-Date: 2020-05-11 04:10+0200\n"
"PO-Revision-Date: 2006-02-11 20:12+0100\n"
"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
"Language-Team: Bosnian <lokal@linux.org.ba>\n"
"Language: bs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.10.2\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Samir Marić, Vedran Ljubović"
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "samir_maric@yahoo.se, vljubovic@smartnet.ba"
#: kde-qt-common/EditWidget.cpp:43
msgid "Select..."
msgstr "Izaberite..."
#: kde-qt-common/expert.cpp:41
msgid ""
"You can edit the lilo.conf file directly here. All changes you make here are "
"automatically transferred to the graphical interface."
msgstr ""
"Ovdje možete unositi promjene direktno u lilo.conf. Sve promjene koje "
"napravite ovdje će automatski biti prebačene u grafički interfejs."
#: kde-qt-common/general.cpp:45
msgid "Install &boot record to drive/partition:"
msgstr "Instaliraj &boot zapis na disk/particiju:"
#: kde-qt-common/general.cpp:55
msgid ""
"Select the drive or partition you want to install the LILO boot loader to "
"here. Unless you intend to use other boot managers in addition to LILO, this "
"should be the MBR (master boot record) of your boot drive.<br>In this case, "
"you should probably select <i>/dev/hda</i> if your boot drive is an IDE "
"drive or <i>/dev/sda</i> if your boot drive is SCSI."
msgstr ""
"Ovdje izaberite disk ili particiju na koju želite da instalirate LILO. "
"Ukoliko ne želite da koristite druge boot menadžere pored LILO-a, to bi "
"trebao biti MBR (master boot record) vašeg boot diska.<br>U ovom slučaju, "
"najvjerovatnije trebate izabrati <i>/dev/hda</i> ako koristite IDE disk ili "
"<i>/dev/sda</i> ukoliko koristite SCSI boot disk."
#: kde-qt-common/general.cpp:58
msgid "Boot the default kernel/OS &after:"
msgstr "Boot-aj osnovni kernel/OS n&akon "
#: kde-qt-common/general.cpp:60
msgid "/10 seconds"
msgstr "/10 sekundi"
#: kde-qt-common/general.cpp:64
msgid ""
"LILO will wait the amount of time specified here before booting the kernel "
"(or OS) marked as <i>default</i> in the <b>Images</b> tab."
msgstr ""
"LILO će sačekati navedeni period prije pokretanja kernela (ili OS-a) "
"označenog sa <i>default</i> u <b>Images</b> kartici."
#: kde-qt-common/general.cpp:67
msgid "Use &linear mode"
msgstr "Koristi &linearni mod"
#: kde-qt-common/general.cpp:69
msgid ""
"Check this box if you want to use the linear mode.<br>Linear mode tells the "
"boot loader the location of kernels in linear addressing rather than sector/"
"head/cylinder.<br>linear mode is required for some SCSI drives, and "
"shouldn't hurt unless you're planning to create a boot disk to be used with "
"a different computer.<br>See the lilo.conf man page for details."
msgstr ""
"Označite ovo ukoliko želite da koristite linearni mod.<br>Linearni mod "
"bootloader-u zadaje lokaciju kernela linearnim adresiranjem, a ne kao sektor/"
"glava/cilindar.<br>Linearni način je potreban za neke SCSI diskove i neće "
"škoditi ukoliko ne planirate da napravite boot disk koji ćete koristiti na "
"drugom kompjuteru.<br>Možete pogledati man lilo.conf ako želite više detalja."
#: kde-qt-common/general.cpp:70
msgid "Use &compact mode"
msgstr "Koristi ko&mpaktni način"
#: kde-qt-common/general.cpp:72
msgid ""
"Check this box if you want to use the compact mode.<br>The compact mode "
"tries to merge read requests for adjacent sectors into a single read "
"request. This reduces load time and keeps the boot map smaller, but will not "
"work on all systems."
msgstr ""
"Označite ovo ako želite da koristite kompaktni način.<br>U kompaktnom načinu "
"zahtjevi za učitavanje razdvojenih sektora će biti grupisani u jedan "
"zahtjev. Ovo skraćuje vrijeme učitavanja i umanjuje boot mapu, ali neće "
"raditi na svim sistemima."
#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
msgid "&Record boot command lines for defaults"
msgstr "&Sačuvaj boot komandnu liniju za default"
#: kde-qt-common/general.cpp:78
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"defaults for the following boots. This way, lilo \"locks\" on a choice until "
"it is manually overridden.\n"
"This sets the <b>lock</b> option in lilo.conf."
msgstr ""
"Ako ovo markirate LILO će snimiti komande kao default za sljedeće boot-ove. "
"Na ovaj način se LILO \"fiksira\" na jedan izbor sve dok nije ručno "
"izmijenjen.\n"
"Ovo će postaviti <b>lock</b> (fiksirano) opciju u lilo.conf datoteci."
#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
msgid "R&estrict parameters"
msgstr "Zab&rani parametre"
#: kde-qt-common/general.cpp:82
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf.<br>This sets a default "
"for all Linux kernels you want to boot. If you need a per-kernel setting, go "
"to the <i>Operating systems</i> tab and select <i>Details</i>."
msgstr ""
"Ako ovo markirate onda će šifra (unesena dolje) biti potrebna samo ako su "
"neki parametri promijenjeni (To jest korisnik može startati <i>linux</i>, "
"ali ne <i>linux single</i>, ili <i>linux init=/bin/sh</i>).\n"
"Ovo će ubaciti <b>restricted</b> (zabranjeno) opciju u lilo.conf.<br>Ovo će "
"biti default za sve kernele koje možete pokrenuti. Ako želite podesiti svaki "
"kernel posebno, koristite karticu <i>Operativni sistemi</i> i izaberite "
"<i>Detalji</i>."
#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
msgid "Require &password:"
msgstr "&Traži šifru:"
#: kde-qt-common/general.cpp:93
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here.<br>This sets a "
"default for all Linux kernels you want to boot. If you need a per-kernel "
"setting, go to the <i>Operating systems</i> tab and select <i>Details</i>."
msgstr ""
"Ovdje unesite šifru potrebnu za start (ako je u upotrebi). Ako je "
"<i>zabrana</i> iznad markirana, šifra će biti potrebna samo za dodatne "
"parametre.<br><b>UPOZORENJE:</b> Šifra se može pročitati u datoteci /etc/"
"lilo.conf. Najbolje je da spriječite korisnike kojima ne vjerujete da čitaju "
"ovu datoteku. Nije poželjno da za ovo koristite vašu normalnu/root šifru."
"<br>Ovo će biti default za sve kernele koje možete startati. Ako želite "
"podesiti svaki kernel posebno, koristite tab <i>Operativni sistemi</i> i "
"izaberite <i>Detalji</i>."
#: kde-qt-common/general.cpp:97
msgid "&Default graphics mode on text console:"
msgstr "&Default grafički prikaz u tekst konzoli:"
#: kde-qt-common/general.cpp:100
msgid ""
"You can select the default graphics mode here.<br>If you intend to use a VGA "
"graphics mode, you must compile the kernel with support for framebuffer "
"devices. The <i>ask</i> setting brings up a prompt at boot time.<br>This "
"sets a default for all Linux kernels you want to boot. If you need a per-"
"kernel setting, go to the <i>Operating systems</i> tab and select "
"<i>Details</i>."
msgstr ""
"Ovdje možete izabrati default grafički prikaz.<br>Ako namjeravate da "
"koritite VGA grafiku, moraćete kompajlirati kernel koji podržava framebuffer "
"uređaje. Opcija <i>pitaj</i> će otvoriti dijalog prilikom boot-a.<br>Ovo će "
"biti default za sve kernele koje možete pokrenuti. Ako želite podesiti svaki "
"kernel posebno, koristite karticu <i>Operativni sistemi</i> i izaberite "
"<i>Detalji</i>."
#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
msgid "default"
msgstr "podrazumjevano"
#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
msgid "ask"
msgstr "pitaj"
#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
msgid "text 80x25 (0)"
msgstr "tekst 80x25 (0)"
#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
msgid "text 80x50 (1)"
msgstr "tekst 80x50 (1)"
#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
msgid "text 80x43 (2)"
msgstr "tekst 80x43 (2)"
#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
msgid "text 80x28 (3)"
msgstr "tekst 80x28 (3)"
#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
msgid "text 80x30 (4)"
msgstr "tekst 80x30 (4)"
#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
msgid "text 80x34 (5)"
msgstr "tekst 80x34 (5)"
#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
msgid "text 80x60 (6)"
msgstr "tekst 80x60 (6)"
#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
msgid "text 40x25 (7)"
msgstr "tekst 40x25 (7)"
#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
msgid "VGA 640x480, 256 colors (769)"
msgstr "VGA 640x480, 256 boja (769)"
#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
msgid "VGA 640x480, 32767 colors (784)"
msgstr "VGA 640x480, 32767 boja (784)"
#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
msgid "VGA 640x480, 65536 colors (785)"
msgstr "VGA 640x480, 65536 boja (785)"
#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
msgid "VGA 640x480, 16.7M colors (786)"
msgstr "VGA 640x480, 16.7M boja (786)"
#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
msgid "VGA 800x600, 256 colors (771)"
msgstr "VGA 800x600, 256 boja (771)"
#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
msgid "VGA 800x600, 32767 colors (787)"
msgstr "VGA 800x600, 32767 boja (787)"
#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
msgid "VGA 800x600, 65536 colors (788)"
msgstr "VGA 800x600, 65536 boja (788)"
#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
msgid "VGA 800x600, 16.7M colors (789)"
msgstr "VGA 800x600, 16.7M boja (789)"
#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
msgid "VGA 1024x768, 256 colors (773)"
msgstr "VGA 1024x768, 256 boja (773)"
#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
msgid "VGA 1024x768, 32767 colors (790)"
msgstr "VGA 1024x768, 32767 boja (790)"
#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
msgid "VGA 1024x768, 65536 colors (791)"
msgstr "VGA 1024x768, 65536 boja (791)"
#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
msgid "VGA 1024x768, 16.7M colors (792)"
msgstr "VGA 1024x768, 16.7M boja (792)"
#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
msgid "VGA 1280x1024, 256 colors (775)"
msgstr "VGA 1280x1024, 256 boja (775)"
#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
msgid "VGA 1280x1024, 32767 colors (793)"
msgstr "VGA 1280x1024, 32767 boja (793)"
#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
msgid "VGA 1280x1024, 65536 colors (794)"
msgstr "VGA 1280x1024, 65536 boja (794)"
#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
msgid "VGA 1280x1024, 16.7M colors (795)"
msgstr "VGA 1280x1024, 16.7M boja (795)"
#: kde-qt-common/general.cpp:130
msgid "Enter LILO &prompt automatically"
msgstr "Uđi u LILO &prompt automatski"
#: kde-qt-common/general.cpp:131
msgid ""
"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
"pressed. If it is turned off, LILO boots the default operating system unless "
"shift is pressed (in that case, it goes to the LILO prompt).<br>This sets "
"the <i>prompt</i> option in lilo.conf."
msgstr ""
"Ako je ovo označeno, LILO će pokrenuti LILO prompt bez obzira jeli ili nije "
"neka tipka pritisnuta. Ako je ovo isključeno, LILO će pokrenuti default OS "
"osim ako je pritisnut shift (u tom slučaju će otvoriti LILO prompt).<br>Ovo "
"će postaviti <i>prompt</i> opciju u lilo.conf datoteci."
#: kde-qt-common/images.cpp:53
msgid ""
"This is the list of kernels and operating systems you can currently boot. "
"Select which one you want to edit here."
msgstr ""
"Ovo je lista kernela i operativnih sistema koje vaš sistem trenutno može "
"pokrenuti. Izaberite onaj koji želite da izmijenite."
#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
msgid "&Kernel:"
msgstr "&Kernel:"
#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
msgid "Enter the filename of the kernel you want to boot here."
msgstr "Ovdje unesite ime datoteke kernela koji želite da bootate."
#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
#: kde-qt-common/images.cpp:216
msgid "&Label:"
msgstr "&Oznaka:"
#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
msgid "Enter the label (name) of the kernel you want to boot here."
msgstr "Ovdje unesite oznaku (naziv) kernela koji želite bootati."
#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
msgid "&Root filesystem:"
msgstr "&Root datotečni sistem:"
#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
msgid ""
"Enter the root filesystem (i.e. the partition that will be mounted as / at "
"boot time) for the kernel you want to boot here."
msgstr ""
"Ovdje unesite root datotečni sistem (to jest particiju koja će biti "
"montirana kao / prilikom boot-a) za kernel koji želite bootati."
#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
msgid "&Initial ramdisk:"
msgstr "&Inicijalni ramdisk:"
#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
msgid ""
"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
"filename here. Leave this field blank if you don't intend to use an initial "
"ramdisk for this kernel."
msgstr ""
"Ako želite da koristite inicijalni ram disk (initrd) za ovaj kernel, unesite "
"ime njegove datoteke ovdje. Ostavite ovo polje prazno ako ne želite da "
"koristite inicijalni ram disk za ovaj kernel."
#: kde-qt-common/images.cpp:71
msgid "E&xtra parameters:"
msgstr "E&kstra parametri:"
#: kde-qt-common/images.cpp:72
msgid ""
"Enter any extra parameters you wish to pass to the kernel here. Usually, "
"this can be left blank.<br>This sets the <i>append</i> option in lilo.conf."
msgstr ""
"Ovdje unesite sve dodatne parametre za kernel. Uobičajeno, ovo polje možete "
"ostaviti prazno.<br>Ovo će dodati <i>append</i> (dodaj) opciju u lilo.conf "
"datoteku."
#: kde-qt-common/images.cpp:79
msgid "Set &Default"
msgstr "Primijeni &default"
#: kde-qt-common/images.cpp:80
msgid "Boot this kernel/OS if the user doesn't make a different choice"
msgstr "Pokreni ovaj kernel/OS ukoliko korisnik ne odluči drukčije"
#: kde-qt-common/images.cpp:82
msgid "De&tails"
msgstr "De&talji"
#: kde-qt-common/images.cpp:83
msgid ""
"This button brings up a dialog box with further, less commonly used, options."
msgstr "Ovo dugme će otvoriti dijalog sa dodatnim, rjeđe korištenim opcijama."
#: kde-qt-common/images.cpp:85
msgid "&Probe"
msgstr "Is&pitaj"
#: kde-qt-common/images.cpp:87
msgid ""
"Automatically generate a (hopefully) reasonable lilo.conf for your system"
msgstr "Automatski pravi (nadati se) smislen lilo.conf za vaš sistem"
#: kde-qt-common/images.cpp:88
msgid "&Check Configuration"
msgstr "Provjeri konfigura&ciju"
#: kde-qt-common/images.cpp:90
msgid "Run LILO in test mode to see if the configuration is ok"
msgstr "Pokreće LILO u test modu radi provjere konfiguracije"
#: kde-qt-common/images.cpp:91
msgid "Add &Kernel..."
msgstr "Dodaj &kernel..."
#: kde-qt-common/images.cpp:93
msgid "Add a new Linux kernel to the boot menu"
msgstr "Dodaje novi Linux kernel boot meniju"
#: kde-qt-common/images.cpp:94
msgid "Add Other &OS..."
msgstr "Dodaj drugi &OS..."
#: kde-qt-common/images.cpp:96
msgid "Add a non-Linux OS to the boot menu"
msgstr "Dodaje drugi (ne-Linux) OS u boot meni"
#: kde-qt-common/images.cpp:97
msgid "&Remove Entry"
msgstr "Izb&riši stavku"
#: kde-qt-common/images.cpp:99
msgid "Remove entry from the boot menu"
msgstr "Briše stavku iz boot menija"
#: kde-qt-common/images.cpp:177
msgid "Configuration ok. LILO said:\n"
msgstr "Konfiguracija u redu. LILO kaže:\n"
#: kde-qt-common/images.cpp:178
msgid "Configuration OK"
msgstr "Konfiguracija u redu"
#: kde-qt-common/images.cpp:180
msgid "Configuration NOT ok. LILO said:\n"
msgstr "Konfiguracija nije u redu. LILO kaže:\n"
#: kde-qt-common/images.cpp:181
msgid "Configuration NOT ok"
msgstr "Konfiguracija nije u redu"
#: kde-qt-common/images.cpp:187
msgid "&Kernel filename:"
msgstr "Ime datote&ke kernela:"
#: kde-qt-common/images.cpp:215
msgid "Boot from dis&k:"
msgstr "Bootaj sa dis&ka:"
#: kde-qt-common/images.cpp:215
msgid ""
"Enter the partition containing the operating system you'd like to boot here."
msgstr "Ovdje unesite particiju sa operativnim sistemom koji želite pokrenuti."
#: kde-qt-common/images.cpp:216
msgid "Enter the label (name) of the operating system here."
msgstr "Ovdje unesite oznaku (naziv) operativnog sistema."
#: kde-qt-common/images.cpp:297
msgid "Dis&k:"
msgstr "Dis&k:"
#: kde-qt-common/mainwidget.cpp:43
msgid "&General Options"
msgstr "&Opće opcije"
#: kde-qt-common/mainwidget.cpp:44
msgid "&Operating Systems"
msgstr "&Operativni sistemi"
#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
msgid "&Expert"
msgstr "&Ekspert"
#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
msgid "&General options"
msgstr "&Opće opcije"
#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
msgid "&Operating systems"
msgstr "&Operativni sistemi"
#: kde/Details.cpp:44 qt/Details.cpp:44
msgid "&Graphics mode on text console:"
msgstr "&Grafički prikaz na tekst konzoli:"
#: kde/Details.cpp:47 qt/Details.cpp:47
msgid ""
"You can select the graphics mode for this kernel here.<br>If you intend to "
"use a VGA graphics mode, you must compile the kernel with support for "
"framebuffer devices. The <i>ask</i> setting brings up a prompt at boot time."
msgstr ""
"Ovdje možete izabrati grafički prikaz za ovaj kernel.<br>Ako namjeravate "
"korititi VGA grafiku, moraćete kompajlirati kernel koji podržava framebuffer "
"uređaje. Postavka <i>pitaj</i> će otvoriti dijalog prilikom boot-a."
#: kde/Details.cpp:75 qt/Details.cpp:76
msgid "Mount root filesystem &read-only"
msgstr "Montiraj datotečni sistem &samo za čitanje"
#: kde/Details.cpp:76 qt/Details.cpp:77
msgid ""
"Mount the root filesystem for this kernel read-only. Since the init scripts "
"normally take care of remounting the root filesystem in read-write mode "
"after running some checks, this should always be turned on.<br>Don't turn "
"this off unless you know what you're doing."
msgstr ""
"Montiraj root datotečni sistem za ovaj kernel bez mogućnosti pisanja. Pošto "
"init skripte u normalnim slučajevima ponovo montiraju root datotečni sistem "
"sa punim pristupom nakon provjera, ovo bi uvijek trebalo biti uključeno."
"<br>Molimo vas da ovo ne isključujete, osim ako razumijete posljedice."
#: kde/Details.cpp:78 qt/Details.cpp:80
msgid "Do not check &partition table"
msgstr "Nemoj provjeravati tabelu &particija"
#: kde/Details.cpp:79
msgid ""
"This turns off some sanity checks while writing the configuration. This "
"should not be used under \"normal\" circumstances, but it can be useful, for "
"example, by providing the capability of booting from a floppy disk, without "
"having a floppy in the drive every time you run lilo.<br>This sets the "
"<i>unsafe</i> keyword in lilo.conf."
msgstr ""
"Ovo će isključiti neke provjere prilikom spremanja konfiguracije. Ne bi "
"trebalo biti korišteno u \"normalnim\" uslovima, ali može biti korisno za "
"npr. dodavanja mogućnosti za bootanje sa diskete a da ne morate imati "
"disketu svaki put kada pokrenete LILO.<br>Ovo će postaviti <i>unsafe</i> "
"(nesigurno) oznaku u lilo.conf datoteku."
#: kde/Details.cpp:83 qt/Details.cpp:86
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"default for the following bootups. This way, lilo \"locks\" on a choice "
"until it is manually overridden.<br>This sets the <b>lock</b> option in lilo."
"conf"
msgstr ""
"Ako ovo markirate LILO će snimiti komande kao default za sljedeće boot-ove "
"Na ovaj način se LILO \"fiksira\" na jedan izbor sve dok nije ručno "
"izmijenjen.<br>Ovo će postaviti <b>lock</b> (fiksirano) oznaku u lilo.conf"
#: kde/Details.cpp:86 qt/Details.cpp:89
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not "
"<i>linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf."
msgstr ""
"Ako ovo markirate onda će šifra (unesena dolje) biti potrebna samo ako su "
"neki parametri promijenjeni (Drugim riječima korisnik može startati "
"<i>linux</i>, ali ne <i>linux single</i>, ili <i>linux init=/bin/sh</i>).\n"
"Ovo će ubaciti <b>restricted</b> (zabranjeno) oznaku u lilo.conf."
#: kde/Details.cpp:94 qt/Details.cpp:98
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here."
msgstr ""
"Ovdje unesite šifru potrebnu za start (ako je u upotrebi). Ako je "
"<i>zabrana</i> iznad markirana, šifra će biti potrebna samo za dodatne "
"parametre.<br><b>UPOZORENJE:</b> Šifra se može pročitati u datoteci /etc/"
"lilo.conf. Najbolje je da spriječite korisnike kojima ne vjerujete da čitaju "
"ovu datoteku. Nije poželjno da za ovo koristite vašu normalnu/root šifru."
#: kde/kcontrol.cpp:48
msgid "kcmlilo"
msgstr "kcmlilo"
#: kde/kcontrol.cpp:48
msgid "LILO Configuration"
msgstr "LILO konfiguracija"
#: kde/kcontrol.cpp:50
msgid "(c) 2000, Bernhard Rosenkraenzer"
msgstr "(c) 2000, Bernhard Rosenkraenzer"
#: qt/Details.cpp:81
msgid ""
"This turns off some sanity checks while writing the configuration. This "
"shouldn't be used under \"normal\" circumstances, but it's useful, for "
"example, for installing the possibility to boot from a floppy disk without "
"having a floppy in the drive every time you run lilo.<br>This sets the "
"<i>unsafe</i> keyword in lilo.conf."
msgstr ""
"Ovo će isključiti neke provjere prilikom spremanja konfiguracije. Ovo ne bi "
"trebalo biti korišteno u \"normalnim\" uslovima, ali može biti korisno za "
"npr. dodavanja mogućnosti za bootanje sa diskete a da ne morate imati "
"disketu svaki put kada pokrenete lilo.<br>Ovo će postaviti <i>unsafe</i> "
"(nesigurno) oznaku u lilo.conf."
#: qt/standalone.cpp:41
msgid "&What's This?"
msgstr "&Šta je ovo?"
#: qt/standalone.cpp:43
msgid ""
"The <i>What's This?</i> button is part of this program's help system. Click "
"on the What's This? button then on any widget in the window to get "
"information (like this) on it."
msgstr ""
"Dugme <i>Šta je ovo?</i> je dio sistema za pomoć programa koji koristite. "
"Pritisnite najprije dugme Šta je ovo?, zatim bilo koji grafički element, da "
"biste dobili informacije o njemu (kao što je ova)."
#: qt/standalone.cpp:47
msgid ""
"This button calls up the program's online help system. If it does nothing, "
"no help file has been written (yet); in that case, use the <i>What's This</"
"i> button on the left."
msgstr ""
"Ovo dugme priziva sistem za pomoć u ovom programu. Ake ne funkcioniše, pomoć "
"(još) nije napisana; u tom slučaju koristite dugme <i>Šta je ovo</i> na "
"lijevoj strani."
#: qt/standalone.cpp:49
msgid "&Default"
msgstr "&Default"
#: qt/standalone.cpp:50
msgid ""
"This button resets all parameters to some (hopefully sane) default values."
msgstr ""
"Ovo dugme će vratiti sve parametre na (nadati se smislene) default "
"vrijednosti."
#: qt/standalone.cpp:52
msgid "&Reset"
msgstr "V&rati"
#: qt/standalone.cpp:53
msgid ""
"This button resets all parameters to what they were before you started the "
"program."
msgstr ""
"Ovo dugme će vratiti sve vrijednosti na one prije nego što ste "
"pokrenuliprogram."
#: qt/standalone.cpp:56
msgid "This button saves all your changes without exiting."
msgstr "Ovo dugme će sačuvati sve promjene bez izlaska iz programa."
#: qt/standalone.cpp:59
msgid "This button saves all your changes and exits the program."
msgstr "Ovo dugme će sačuvati sve promjene i zatvoriti program."
#: qt/standalone.cpp:62
msgid "This button exits the program without saving your changes."
msgstr "Ovo dugme će zatvoriti program i neće sačuvati promjene."