You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-fa/messages/tdeaccessibility/kttsd.po

3198 lines
116 KiB

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of kttsd.po to Persian
# Zahra Farahmandi <farahmandi@itland.ir>, 2006.
# MaryamSadat Razavi <razavi@itland.ir>, 2006.
# Nazanin Kazemi <kazemi@itland.ir>, 2006, 2007.
# Tahereh Dadkhahfar <dadkhahfar@itland.ir>, 2006.
# Mahdi Foladgar <foladgar@itland.ir>, 2006.
# Nasim Daniarzadeh <daniarzadeh@itland.ir>, 2006.
msgid ""
msgstr ""
"Project-Id-Version: kttsd\n"
"POT-Creation-Date: 2014-09-29 12:06-0500\n"
"PO-Revision-Date: 2007-01-21 15:35+0330\n"
"Last-Translator: Nazanin Kazemi <kazemi@itland.ir>\n"
"Language-Team: Persian <kde-i18n-fa@kde.org>\n"
"Language: fa\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 16
#: kcmkttsmgr/kcmkttsmgr.cpp:1220 rc.cpp:9
#, no-c-format
msgid "Add Talker"
msgstr "افزودن گوینده"
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 49
#: rc.cpp:12 rc.cpp:21
#, no-c-format
msgid "Select the speech synthesizer to do the speaking."
msgstr "گزینش ترکیب‌دهندۀ گفتار برای گفتن‌."
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 69
#: rc.cpp:15 rc.cpp:33
#, no-c-format
msgid ""
"Select the language to be spoken. Note that after you configure a Talker, your "
"chosen Language may be overridden by the synthesizer, depending upon the "
"options you choose."
msgstr ""
"زبانی که باید صحبت شود را برگزینید‌‌. توجه کنید که بعد از این ‌که گوینده‌ای را "
"پیکربندی کردید، ممکن است ترکیب‌ده، متناسب با گزینه‌هایی که انتخاب می‌کنید، زبان "
"انتخابی شما را نادیده بگیرد‌."
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 95
#: rc.cpp:18 rc.cpp:423
#, no-c-format
msgid "&Synthesizer:"
msgstr "&ترکیب‌ده:"
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 186
#: rc.cpp:24
#, no-c-format
msgid "Show All"
msgstr "نمایش همه"
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 192
#: rc.cpp:27
#, no-c-format
msgid ""
"The radio buttons below determine which box shows all possibilities. The box "
"to the left of the checked button shows all possibilities. The box to the left "
"of the unchecked box only shows those possibilities that match the other box."
msgstr ""
"دکمه‌های رادیویی زیر مشخص می‌کنند، که کدام جعبه همۀ احتمالات را نمایش می‌دهد‌‌. "
"جعبۀ سمت چپ دکمۀ علامت‌دار، همۀ احتمالات را نمایش می‌دهد‌‌. جعبۀ سمت چپ جعبۀ "
"بدون علامت، تنها احتمالاتی را نمایش می‌دهد که با جعبۀ دیگر تطابق می‌کنند‌."
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 200
#: rc.cpp:30 rc.cpp:435
#, no-c-format
msgid "&Language:"
msgstr "&زبان:"
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 227
#: rc.cpp:36
#, no-c-format
msgid ""
"Check to list all the possible languages in the Language box at the left. When "
"a language has been chosen, the Synthesizer box will show only those "
"synthesizers that can speak in the chosen language."
msgstr ""
"علامت بزنید تا همۀ زبانهای ممکن در جعبۀ زبان سمت چپ فهرست شوند‌‌. زمانی که یک "
"زبان انتخاب شده، جعبۀ ترکیب‌ده، تنها ترکیب‌دهنده‌هایی را که می‌توانند به زبان "
"انتخاب‌شده صحبت کنند، نمایش می‌دهد‌."
#. i18n: file kcmkttsmgr/addtalkerwidget.ui line 241
#: rc.cpp:39
#, no-c-format
msgid ""
"Check this box to display all the available synthesizers in the Synthesizer box "
"to the left. When a synthesizer is chosen, only the languages that can be "
"spoken by that synthesizer appear in the Language box."
msgstr ""
"به منظور نمایش همۀ ترکیب‌دهنده‌های موجود در جعبۀ ترکیب‌ده سمت چپ، این جعبه را "
"علامت بزنید‌‌. زمانی که ترکیب‌ده انتخاب می‌شود، تنها زبانهایی که می‌توانند با "
"آن ترکیب‌دهنده هم‌صحبت شوند، در جعبۀ زبان ظاهر می‌شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 45
#: rc.cpp:42
#, no-c-format
msgid "&General"
msgstr "&عمومی‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 56
#: rc.cpp:45
#, no-c-format
msgid "&Enable Text-to-Speech System (KTTSD)"
msgstr "&فعال‌سازی سیستم متن به گفتار )KTTSD("
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 59
#: rc.cpp:48
#, no-c-format
msgid "Check to start the KTTS Deamon and enable Text-to-Speech."
msgstr "علامت بزنید تا شبح KTTSD آغاز و متن به گفتار فعال شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 67
#: rc.cpp:51
#, no-c-format
msgid "Always em&bed Text-to-Speech Manager in system tray"
msgstr "همیشه مدیر متن به گفتار، در سینی سیستم &نهفته باشد‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 73
#: rc.cpp:54
#, no-c-format
msgid ""
"When checked, KTTSMgr displays an icon in the system tray, and clicking OK or "
"Cancel buttons does not stop KTTSMgr. Use system tray context menu to quit "
"KTTSMgr. This setting takes effect when KTTSMgr is next started. This setting "
"has no effect when running in the Trinity Control Center."
msgstr ""
"وقتی که علامت زده شد، KTTSMgr شمایلی را در سینی سیستم نمایش می‌دهد، و با فشار "
"دکمه‌های تأیید یا لغو KTTSMgr نمی‌ایستد‌‌. از گزینگان متن سینی سیستم استفاده "
"کنید، تا از KTTSMgr خارج شود‌‌. این تنظیم، زمانی مؤثر است که KTTSMgr بعداً آغاز "
"شود‌‌. این تنظیم، زمانی که در مرکز کنترل TDE اجرا می‌شود، مؤثر نیست‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 123
#: rc.cpp:57
#, no-c-format
msgid "Show &main window on startup"
msgstr "نمایش پنجرۀ &اصلی هنگام راه‌اندازی‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 129
#: rc.cpp:60
#, no-c-format
msgid ""
"When checked, the KTTSMgr window is displayed when KTTSMgr starts. When "
"unchecked, click on the icon in the system tray to display the KTTSMgr window."
msgstr ""
"زمانی که علامت زده شد، پنجرۀ KTTSMgr هنگام آغاز KTTSMgr نمایش داده می‌شود‌‌. "
"زمانی که علامت ندارد، شمایل روی سینی سیستم را فشار دهید تا پنجرۀ KTTSMgr نمایش "
"داده شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 164
#: rc.cpp:63
#, no-c-format
msgid "E&xit when speaking is finished"
msgstr "&خروج هنگام اتمام گفتار‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 170
#: rc.cpp:66
#, no-c-format
msgid ""
"When checked, and KTTSMgr was automatically started when speech began, "
"automatically exits when speech has finished. Does not automatically exit if "
"KTTSMgr was started manually or started from the Control Center."
msgstr ""
"وقتی که علامت زده شد و KTTSMgr به صورت خودکار هنگام آغاز گفتار شروع شد، هنگام "
"اتمام گفتار هم به صورت خودکار خارج می‌شود‌‌. اگر KTTSMgr به صورت دستی یا از "
"مرکز کنترل آغاز شده، به صورت خودکار خارج نمی‌شود‌. "
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 180
#: rc.cpp:69
#, no-c-format
msgid "Sta&rt minimized in system tray when speaking"
msgstr "&آغاز به صورت کمینه در سینی سیستم، هنگام گفتار‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 186
#: rc.cpp:72
#, no-c-format
msgid ""
"When checked, if KTTSMgr is not already running and speech begins, starts "
"KTTSMgr and displays an icon in the system tray. <em>Note<em>"
": KTTSMgr only automatically starts for text jobs having 5 sentences or more."
msgstr ""
"زمانی که علامت زده شد، اگر KTTSMgr هنوز اجرا نشده و گفتار شروع شود، KTTSMgr "
"آغاز و شمایل در سینی سیستم نشان داده می‌شود‌‌. <em>نکته<em>"
": KTTSMgrتنها برای کارهای متنی که ۵ جمله یا بیشتر دارند، به صورت خودکار آغاز "
"می‌شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 196
#: rc.cpp:75
#, no-c-format
msgid "&Talkers"
msgstr "&گویندگان‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 205
#: rc.cpp:78
#, no-c-format
msgid "ID"
msgstr "شناسه"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 216
#: filters/sbd/sbdconf.cpp:239
#: filters/stringreplacer/stringreplacerconf.cpp:424
#: kcmkttsmgr/kcmkttsmgr.cpp:1243 libkttsd/selecttalkerdlg.cpp:166 rc.cpp:81
#: rc.cpp:453
#, no-c-format
msgid "Language"
msgstr "زبان"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 227
#: rc.cpp:84 rc.cpp:456
#, no-c-format
msgid "Speech Synthesizer"
msgstr "ترکیب‌ده گفتار"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 238
#: rc.cpp:87 rc.cpp:459
#, no-c-format
msgid "Voice"
msgstr "صدا"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 249
#: rc.cpp:90 rc.cpp:462 rc.cpp:1198
#, no-c-format
msgid "Gender"
msgstr "جنسیت"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 260
#: rc.cpp:93 rc.cpp:465
#, no-c-format
msgid "Volume"
msgstr "حجم صدا"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 271
#: rc.cpp:96 rc.cpp:468
#, no-c-format
msgid "Rate"
msgstr "نرخ"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 284
#: rc.cpp:99 rc.cpp:471
#, no-c-format
msgid ""
"This is a list of all the configured Talkers. A Talker is a speech synthesizer "
"that has been configured with a language, voice, gender, speaking rate, and "
"volume. Talkers higher in the list have higher priority. The topmost Talker "
"will be used when no talker attributes have been specified by an application."
msgstr ""
"این فهرستی از همۀ گوینده‌های پیکربندی‌شده می‌باشد‌‌. گوینده یک ترکیب‌ده گفتار "
"است، که با یک زبان، صدا، جنسیت، سرعت گفتار و حجم صدا پیکربندی شده است‌‌. "
"گوینده‌هایی که در فهرست بالاترند، اولویت بیشتری دارند‌‌. بالاترین گوینده زمانی "
"استفاده می‌شود، که هیچ‌کدام از خصیصه‌های گوینده توسط کاربرد مشخص نشده باشند‌‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 308
#: rc.cpp:102 rc.cpp:150 rc.cpp:234
#, no-c-format
msgid "Add..."
msgstr "افزودن‌..."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 314
#: rc.cpp:105
#, no-c-format
msgid "Click to add and configure a new Talker (speech synthesizer)."
msgstr "فشار دهید تا یک گویندۀ جدید )ترکیب‌ده گفتار( اضافه و پیکربندی شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 331
#: kcmkttsmgr/kcmkttsmgr.cpp:168 rc.cpp:108 rc.cpp:240
#, no-c-format
msgid "U&p"
msgstr "&بالا‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 347
#: kcmkttsmgr/kcmkttsmgr.cpp:170 rc.cpp:111 rc.cpp:246 rc.cpp:663
#, no-c-format
msgid "Do&wn"
msgstr "&پایین‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 366
#: kcmkttsmgr/kcmkttsmgr.cpp:166 rc.cpp:114 rc.cpp:252 rc.cpp:669
#, no-c-format
msgid "&Edit..."
msgstr "&ویرایش‌..."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 372
#: rc.cpp:117
#, no-c-format
msgid "Click to configure options for the highlighted Talker."
msgstr "فشار دهید تا گزینه‌ها برای گویندۀ مشخص‌شده پیکربندی شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 397
#: rc.cpp:123
#, no-c-format
msgid "Click to remove the highlighted Talker."
msgstr "فشار دهید تا گویندۀ مشخص‌شده حذف شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 426
#: rc.cpp:126
#, no-c-format
msgid "&Notifications"
msgstr "&اخطارها‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 452
#: rc.cpp:129
#, no-c-format
msgid "Application/Event"
msgstr "کاربرد/رویداد"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 463
#: rc.cpp:132
#, no-c-format
msgid "Action"
msgstr "کنش"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 474
#: rc.cpp:135
#, no-c-format
msgid "Talker"
msgstr "گوینده"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 493
#: rc.cpp:138
#, no-c-format
msgid ""
"This is a list of configured application events and actions to be taken when "
"received. The \"default\" event governs all events not specifically "
"configured."
msgstr ""
"فهرستی از رویدادها و کنشهای کاربرد پیکربندی شده است، که باید هنگام دریافت در "
"نظر گرفته شوند‌‌. رویداد »پیش‌فرض« بر همۀ رویدادهایی که به طور مشخص پیکربندی "
"نشده‌اند، تأثیر دارد‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 517
#: rc.cpp:141
#, no-c-format
msgid "Notifications to speak:"
msgstr "اخطارها برای گفتن:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 523
#: rc.cpp:144 rc.cpp:147
#, no-c-format
msgid ""
"Applies only to the default event. Does not affect application-specific "
"events. Only events that display in the manner which you select will be "
"spoken."
msgstr ""
"تنها رویداد پیش‌فرض را اعمال می‌کند‌‌. بر رویدادهای کاربردی مشخص تأثیر ندارد‌‌. "
"تنها رویدادهایی که در حالت انتخاب نشان داده می‌شوند، گفته می‌شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 555
#: rc.cpp:153
#, no-c-format
msgid "Click to configure notification for a specific application event."
msgstr "فشار دهید تا اخطار برای رویداد کاربرد مشخص پیکربندی شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 563
#: kttsjobmgr/kttsjobmgr.cpp:199 rc.cpp:156
#, no-c-format
msgid "Re&move"
msgstr "&حذف‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 566
#: rc.cpp:159
#, no-c-format
msgid ""
"Click to remove a specific notification event from the list. You cannot remove "
"the default event."
msgstr ""
"فشار دهید تا رویداد اخطار مشخص از فهرست حذف شود‌‌. شما نمی‌توانید رویداد "
"پیش‌فرض را حذف کنید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 591
#: rc.cpp:162 rc.cpp:750
#, no-c-format
msgid "Cl&ear"
msgstr "&پاک کردن‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 594
#: rc.cpp:165
#, no-c-format
msgid ""
"Removes all the application specific events. The default event remains."
msgstr ""
"همۀ رویدادهای کاربردی مشخص را حذف می‌کند‌‌. رویداد پیش‌فرض باقی می‌ماند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 602
#: rc.cpp:168 rc.cpp:738
#, no-c-format
msgid "&Load..."
msgstr "&بار کردن‌..."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 605
#: rc.cpp:171
#, no-c-format
msgid "Click to read configured notification events from a file."
msgstr "فشار دهید تا رویدادهای اخطار پیکربندی‌شده، از یک پرونده خوانده شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 613
#: rc.cpp:174 rc.cpp:627 rc.cpp:744
#, no-c-format
msgid "&Save..."
msgstr "&ذخیره‌..."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 616
#: rc.cpp:177
#, no-c-format
msgid "Click to write all the configured application events to a file."
msgstr "برای نوشتن همۀ رویدادهای کاربردی پیکربندی‌شده در پرونده، فشار دهید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 637
#: rc.cpp:180
#, no-c-format
msgid "Click to test notification"
msgstr "برای آزمایش اخطار فشار دهید"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 640
#: rc.cpp:183
#, no-c-format
msgid ""
"Click this button to test the notification. A sample message will be spoken. "
"Note: The Text-to-Speech system must be enabled."
msgstr ""
"این دکمه را فشار دهید تا اخطار آزمایش شود‌‌. پیام نمونه گفته می‌شود‌‌. نکته: "
"سیستم متن به گفتار باید فعال شود."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 656
#: rc.cpp:186
#, no-c-format
msgid "Ac&tion:"
msgstr "&کنش:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 662
#: rc.cpp:189 rc.cpp:192 rc.cpp:195
#, no-c-format
msgid ""
"<qt>Specifies how KTTS should speak the event when received. If you select "
"\"Speak custom text\", enter the text in the box. You may use the following "
"substitution strings in the text:<dl><dt>%e</dt><dd>Name of the event</dd><dt>"
"%a</dt><dd>Application that sent the event</dd><dt>%m</dt><dd>"
"The message sent by the application</dd></dl></qt>"
msgstr ""
"<qt>مشخص می‌کند که چگونه KTTS باید رویداد را هنگام دریافت بگوید‌‌. اگر »گفتن "
"متن سفارشی « را برمی‌گزینید، متن را در جعبه وارد کنید‌‌. ممکن است از رشته‌های "
"جانشینی زیر در متن استفاده کنید:<dl><dt>%e</dt><dd>نام رویداد</dd><dt>%a</dt>"
"<dd> کاربردی که رویداد را ارسال می‌کند</dd><dt>%m</dt><dd>"
"پیام ارسالی توسط کاربرد</dd></dl></qt>"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 712
#: rc.cpp:198
#, no-c-format
msgid "Talke&r:"
msgstr "&گوینده‌:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 718
#: rc.cpp:201 rc.cpp:204
#, no-c-format
msgid ""
"The Talker that will speak the notification. The \"default\" Talker is the "
"topmost talker listed on the Talkers tab."
msgstr ""
"گویند‌ه‌ای که اخطار را می‌گوید‌‌. گویندۀ »پیش‌فرض«، بالاترین گویندۀ فهرست‌شده "
"بر روی تب گوینده‌ها می‌باشد‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 744
#: rc.cpp:207 rc.cpp:441 rc.cpp:498 rc.cpp:531 rc.cpp:576 rc.cpp:612
#: rc.cpp:714 rc.cpp:732
#, no-c-format
msgid "..."
msgstr ""
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 747
#: rc.cpp:210
#, no-c-format
msgid "Click to select the Talker to speak the notification."
msgstr "فشار دهید تا گوینده برای گفتن اخطار انتخاب شود."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 767
#: rc.cpp:213
#, no-c-format
msgid "Speak notifications (&KNotify)"
msgstr "بیان اخطارها )&KNotify("
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 770
#: rc.cpp:216
#, no-c-format
msgid ""
"When checked and KTTS is enabled, notification events from applications sent "
"via KNotify will be spoken according to the options you set on this tab."
msgstr ""
"زمانی که علامت زده شد و KTTS فعال گردید، رویدادهای اخطار از کاربردهای ارسالی از "
"طریق KNotify، طبق گزینه‌هایی که روی این تب تنظیم کرده‌اید، گفته خواهد شد‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 795
#: rc.cpp:219
#, no-c-format
msgid "E&xclude notifications with a sound"
msgstr "&مستثنی کردن اخطارهای همراه با یک صدا‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 801
#: rc.cpp:222
#, no-c-format
msgid "When checked, notification events that have a sound will not be spoken."
msgstr "زمانی که علامت زده شد، رویدادهای اخطار که صدایی دارند گفته نمی‌شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 813
#: rc.cpp:225
#, no-c-format
msgid "&Filters"
msgstr "&پالایه‌ها‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 830
#: kcmkttsmgr/kcmkttsmgr.cpp:1437 rc.cpp:228
#, no-c-format
msgid "Filter"
msgstr "پالایه"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 846
#: rc.cpp:231
#, no-c-format
msgid ""
"This is a list of all the configured Filters. Filters higher in the list are "
"applied first. Filters modify text before it is spoken. They can be used to "
"substitute for mispronounced words, transform XML from one form to another, or "
"change the default Talker to be used for speech output."
msgstr ""
"این فهرستی از همۀ پالایه‌های پیکربندی‌شده است‌‌. پالایه‌هایی که در فهرست "
"بالاترند، اول اعمال می‌شوند‌‌. پالایه‌ها متن را پیش از گفته شدن تغییر "
"می‌دهند‌‌. آنها را می‌توان به منظور جانشینی برای واژه‌هایی با تلفظ غلط، تبدیل "
"XML از یک صورت به صورت دیگر، یا تغییر گویندۀ پیش‌فرض جهت استفاده برای خروجی "
"گفتار استفاده کرد‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 876
#: rc.cpp:237
#, no-c-format
msgid "Click to add and configure a new Filter."
msgstr "فشار دهید تا پالایه‌ای جدید اضافه و پیکربندی شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 896
#: rc.cpp:243
#, no-c-format
msgid ""
"Click to move selected filter up in the list. Filters higher in the list are "
"applied first."
msgstr ""
"فشار دهید تا پالایۀ برگزیده به بالای فهرست برود‌‌. پالایه‌های بالاتر در فهرست، "
"اول اعمال می‌شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 915
#: rc.cpp:249
#, no-c-format
msgid ""
"Click to move a filter down in the list. Filters lower in the list are applied "
"last."
msgstr ""
"فشار دهید تا یک پالایه به پایین فهرست برود‌‌. پالایه‌های پایین‌تر در فهرست، آخر "
"اعمال می‌شوند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 940
#: rc.cpp:255
#, no-c-format
msgid "Click to configure options for the highlighted Filter."
msgstr "فشار دهید تا گزینه‌ها برای پالایۀ مشخص‌شده پیکربندی شوند‌‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 965
#: rc.cpp:261
#, no-c-format
msgid "Click to remove the highlighted Filter."
msgstr "فشار دهید تا پالایۀ مشخص‌شده حذف شود‌‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1000
#: rc.cpp:264
#, no-c-format
msgid "Sentence Boundary Detector"
msgstr "آشکارساز کرانۀ جمله"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1016
#: rc.cpp:267
#, no-c-format
msgid ""
"This is a list of all the configured Sentence Boundary Detector (SBD) Filters. "
"SBDs break long text jobs up into sentences, which reduces the time before a "
"job begins speaking, and permits you to advance or rewind through a job. SBDs "
"are applied in the order listed (top to bottom) after all the normal filters at "
"the top of this screen have been applied. Filtering stops when the first SBD "
"modifies the text."
msgstr ""
"این فهرستی از همۀ پالایه‌های آشکارساز کرانۀ جمله )SBD( است‌‌. SBDها کارهای متنی "
"بلند را به جمله‌هایی می‌شکنند، که زمان را پیش از این که کار شروع به گفتن کند "
"می‌کاهد، و به شما این امکان را می‌دهد که درکاری پیش بروید یا بازپیچی کنید‌‌. "
"SBDها در فهرست مرتب‌شده )از بالا به پایین(، پس از همۀ پالایه‌های عادی در بالای "
"این پرده به کار می‌روند‌‌. پالایش زمانی می‌ایستد، که اولین SBD متن را تغییر "
"می‌دهد‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1040
#: rc.cpp:270
#, no-c-format
msgid "Co&nfigure"
msgstr "&پیکربندی‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1043
#: rc.cpp:273
#, no-c-format
msgid ""
"Click this button to edit the Sentence Boundary Detector (SBD) configuration or "
"add additional SBD filters."
msgstr ""
"این دکمه را فشار دهید، تا پیکربندی آشکارساز کرانۀ جمله)SBD( یا افزودن "
"پالایه‌های اضافی، ویرایش شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1074
#: rc.cpp:276
#, no-c-format
msgid "&Interruption"
msgstr "&وقفه‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1104
#: rc.cpp:279 rc.cpp:294
#, no-c-format
msgid ""
"Check the Pre-sound box and choose a Pre-sound audio file, which will sound "
"when a text job is interrupted by another message."
msgstr ""
"جعبۀ پیش‌صوت را علامت بزنید و یک پروندۀ صوتی پیش‌صوت انتخاب کنید، که زمانی که "
"کار متن با پیام دیگر قطع می‌شود، به صدا در می‌آید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1115
#: rc.cpp:282 rc.cpp:288
#, no-c-format
msgid ""
"Check the Post-message box and enter a Post-message, which will be spoken when "
"a text job resumes after being interrupted by another message."
msgstr ""
"جعبۀ پس‌پیام را علامت بزنید و یک پس‌پیام وارد کنید، که زمانی گفته می‌شود که کار "
"متن پس از قطع شدن توسط پیام دیگر از سر گرفته می‌شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1124
#: rc.cpp:285
#, no-c-format
msgid "Post-&message:"
msgstr "پس‌&پیام:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1146
#: rc.cpp:291
#, no-c-format
msgid "Pre-sou&nd:"
msgstr "پیش‌&صدا:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1160
#: rc.cpp:297
#, no-c-format
msgid "&Pre-message:"
msgstr "&پیش‌پیام:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1169
#: rc.cpp:300 rc.cpp:312
#, no-c-format
msgid ""
"Check the Pre-message box and enter a Pre-message, which will be spoken "
"whenever a text job is interrupted by another message."
msgstr ""
"جعبۀ پیش‌پیام را علامت بزنید و یک پیش‌پیام وارد کنید، که هرگاه کار متن توسط "
"پیام دیگر قطع شد، گفته شود."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1188
#: rc.cpp:303 rc.cpp:309
#, no-c-format
msgid ""
"Check the Post-sound and choose a Post-sound audio file, which will sound "
"before a text job resumes after being interrupted by another message."
msgstr ""
"پس‌صدا را علامت بزنید و یک پروندۀ صوتی پس‌صدا انتخاب کنید، که پیش ازسرگیری کار "
"متن پس از قطع توسط پیام دیگر، به صدا در آید."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1196
#: rc.cpp:306
#, no-c-format
msgid "Post-s&ound:"
msgstr "پس‌&صدا:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1246
#: rc.cpp:315
#, no-c-format
msgid "A&udio"
msgstr "&صوتی‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1265
#: rc.cpp:318
#, no-c-format
msgid "&Keep audio files:"
msgstr "&نگهداری پرونده‌های صوتی:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1268
#: rc.cpp:321
#, no-c-format
msgid ""
"Check this if you want to keep the generated audio (wav) files. You will find "
"them in the indicated directory."
msgstr ""
"اگر می‌خواهید پرونده‌های صوتی تولیدشده )wav( را نگه دارید، این را علامت "
"بزنید‌‌. آنها را در فهرست راهنمای شاخص‌شده می‌یابید‌. "
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1287
#: rc.cpp:324
#, no-c-format
msgid "Specify the directory in which the audio files will be copied."
msgstr ""
" فهرست راهنمایی که پرونده‌های صوتی در آن رونوشت خواهند شد را مشخص کنید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1313
#: rc.cpp:327
#, no-c-format
msgid "&Speed:"
msgstr "&سرعت:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1319
#: rc.cpp:330 rc.cpp:336 rc.cpp:339 rc.cpp:994 rc.cpp:1012 rc.cpp:1024
#, no-c-format
msgid ""
"Sets the speed of speech. Slide the slider to the left to slow speech down; to "
"the right to increase talking speed. Anything less than 75 percent is "
"considered \"slow\", and anything greater than 125 percent is considered "
"\"fast\". You cannot change the speed of MultiSyn voices."
msgstr ""
"سرعت گفتار را تنظیم می‌کند‌‌. لغزان را به چپ بلغزانید تا سرعت گفتار کم شود؛ اگر "
"به راست بلغزانید، سرعت گفتار زیاد می‌شود‌‌. همۀ مقادیر کمتر از ۷۵ درصد »کند«، و "
"همۀ مقادیر بیش از ۱۲۵ درصد »تند« در نظر گرفته می‌شوند‌‌. نمی‌توانید سرعت صداهای "
"چند ترکیبی را تغییر دهید‌‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1338
#: rc.cpp:333 rc.cpp:883 rc.cpp:889 rc.cpp:1003 rc.cpp:1009 rc.cpp:1015
#: rc.cpp:1120 rc.cpp:1135 rc.cpp:1150
#, no-c-format
msgid " %"
msgstr " ٪"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1431
#: rc.cpp:342
#, no-c-format
msgid "Out&put Using"
msgstr "استفاده از&خروجی‌"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1434
#: rc.cpp:345
#, no-c-format
msgid ""
"<p>Select the audio output method desired. If you select <b>GStreamer</b>"
", you must also select a <b>Sink</b>.</p>"
"<p><em>Note</em>: You must have GStreamer >= 0.87 to use GStreamer.</p>"
msgstr ""
"<p>روش خروجی صوتی مورد نظر را برگزینید‌‌. اگر <b>GStreamer</b> "
"را برگزینید، باید یک <b>چاه</b>را هم برگزینید‌. </p>"
"<p><em>نکته</em>: باید برای استفاده از GStreamer، GStreamer بزرگ‌تر یا مساوی "
"۷۸/۰ داشته باشید‌. </p>"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1456
#: rc.cpp:348 rc.cpp:357
#, no-c-format
msgid "Sink:"
msgstr "چاه:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1459
#: rc.cpp:351 rc.cpp:354 rc.cpp:393
#, no-c-format
msgid "Select the sound sink to be used for GStreamer output."
msgstr "چاه صدا را برای استفاده در مورد خروجی GStreamer برگزینید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1502
#: rc.cpp:360
#, no-c-format
msgid "Select the sound sink to be used for aKode output."
msgstr "چاه صدا را برگزینید تا برای خروجی aKode استفاده شود‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1521
#: rc.cpp:363
#, no-c-format
msgid ""
"Select the sink to be used for aKode output. Select \"auto\" to let aKode pick "
"the best output method."
msgstr ""
"چاه را برگزینید تا برای خروجی aKode استفاده شود‌‌. »خودکار« را برگزینید تا "
"aKode بتواند بهترین روش خروجی را برگزیند‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1534
#: rc.cpp:366
#, no-c-format
msgid "GStrea&mer"
msgstr ""
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1540
#: rc.cpp:369
#, no-c-format
msgid ""
"<p>Check to use the GStreamer audio output system. You must also select a <b>"
"Sink</b> plugin.</p>"
msgstr ""
"<p>برای استفاده از سیستم خروجی صوتی GStreamer علامت بزنید‌‌. شما باید وصلۀ<b>"
"چاه</b>را هم برگزینید‌. </p>"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1548
#: rc.cpp:372
#, no-c-format
msgid "a&Rts"
msgstr ""
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1557
#: rc.cpp:375
#, no-c-format
msgid "Check to use the TDE aRts system for audio output."
msgstr "برای استفاده از سیستم TDE aRts برای خروجی صوتی، علامت بزنید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1568
#: rc.cpp:378
#, no-c-format
msgid "aKode"
msgstr ""
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1580
#: rc.cpp:381
#, no-c-format
msgid ""
"<p>Check to use aKode for audio output. You must also select a <b>Sink</b>.</p>"
msgstr ""
"<p>علامت زدن جهت استفاده از aKode برای خروجی صوتی‌‌. باید یک<b>چاه</b>"
"هم برگزینید‌. </p>"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1599
#: rc.cpp:384
#, no-c-format
msgid "ALSA"
msgstr "معماری پیشرفتۀ صدای لینوکس"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1611
#: rc.cpp:387
#, no-c-format
msgid "Check to use Advanced Linux Sound Architecture (ALSA) for audio output."
msgstr ""
" جهت استفاده از معماری پیشرفتۀ صدای لینوکس )ALSA( برای خروجی صوتی، علامت "
"بزنید‌."
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1630
#: rc.cpp:390
#, no-c-format
msgid "Device:"
msgstr "دستگاه:"
#. i18n: file kcmkttsmgr/kcmkttsmgrwidget.ui line 1652
#: rc.cpp:396
#, no-c-format
msgid ""
"Select the PCM device to be used for ALSA output. Select \"default\" to use "
"the default ALSA device."
msgstr ""
"دستگاه PCM را برگزینید تا برای خروجی ALSA استفاده شود‌‌. »پیش‌فرض« را برگزینید، "
"تا دستگاه پیش‌فرض ALSA استفاده شود‌."
#. i18n: file kcmkttsmgr/selecteventwidget.ui line 24
#: rc.cpp:399
#, no-c-format
msgid "Event source:"
msgstr "منبع رویداد:"
#. i18n: file kcmkttsmgr/selecteventwidget.ui line 38
#: rc.cpp:402
#, no-c-format
msgid "Events"
msgstr "رویدادها"
#. i18n: file libkttsd/selecttalkerwidget.ui line 25
#: filters/talkerchooser/talkerchooserconf.cpp:225
#: kcmkttsmgr/kcmkttsmgr.cpp:2501 kttsjobmgr/kttsjobmgr.cpp:496
#: libkttsd/selecttalkerdlg.h:61 rc.cpp:405
#, no-c-format
msgid "Select Talker"
msgstr "برگزیدن گوینده"
#. i18n: file libkttsd/selecttalkerwidget.ui line 61
#: rc.cpp:408
#, no-c-format
msgid "&Use default Talker"
msgstr "&استفاده از گویندۀ پیش‌فرض‌"
#. i18n: file libkttsd/selecttalkerwidget.ui line 64
#: rc.cpp:411
#, no-c-format
msgid ""
"When checked, will use the default Talker, which is the topmost Talker listed "
"in the Talkers tab."
msgstr ""
"زمانی که علامت زده شد، گویندۀ پیش‌فرض که بالاترین گویندۀ فهرست‌شده در تب "
"گویندگان است، استفاده می‌شود‌."
#. i18n: file libkttsd/selecttalkerwidget.ui line 72
#: rc.cpp:414
#, no-c-format
msgid "Use closest &matching Talker having"
msgstr "استفاده از نزدیک‌ترین &تطابقی که گوینده دارد‌"
#. i18n: file libkttsd/selecttalkerwidget.ui line 75
#: rc.cpp:417
#, no-c-format
msgid ""
"When checked, will use a configured Talker most closely matching the attributes "
"you choose. Attributes with checks next to them will be preferred over "
"unchecked attributes. Language is always preferred."
msgstr ""
"زمانی که علامت زده شد، گوینده‌ای پیکربندی‌شده که تطابق نزدیک‌تری با خصیصه‌های "
"انتخابی شما دارد، استفاده می‌شود‌‌. خصیصه‌ها با علامتهای کنار آنها بر خصیصه‌های "
"بدون علامت ارجح هستند‌‌. زبان همیشه در اولویت است‌."
#. i18n: file libkttsd/selecttalkerwidget.ui line 125
#: rc.cpp:420
#, no-c-format
msgid "Checked items are preferred over unchecked items."
msgstr "فقره‌های علامت‌دار بر فقره‌های بدون علامت ارجح هستند‌."
#. i18n: file libkttsd/selecttalkerwidget.ui line 192
#: rc.cpp:426
#, no-c-format
msgid "&Gender:"
msgstr "&جنسیت:"
#. i18n: file libkttsd/selecttalkerwidget.ui line 257
#: rc.cpp:429 rc.cpp:985
#, no-c-format
msgid "&Volume:"
msgstr "&حجم صدا:"
#. i18n: file libkttsd/selecttalkerwidget.ui line 305
#: rc.cpp:432
#, no-c-format
msgid "&Rate:"
msgstr "&سرعت:"
#. i18n: file libkttsd/selecttalkerwidget.ui line 374
#: rc.cpp:438 rc.cpp:702 rc.cpp:711
#, no-c-format
msgid ""
"This filter is applied to text jobs of the specified language. You may select "
"more than one language by clicking the browse button and Ctrl-clicking on more "
"than one in the list. If blank, the filter applies to all text jobs of any "
"language."
msgstr ""
"این پالایه برای کارهای متن زبان مشخص‌شده اعمال می‌شود‌‌. ممکن است با فشار دکمۀ "
"مرور و فشار مهار روی بیش از یک زبان در فهرست، بیش از یک زبان را برگزینید‌‌. در "
"صورت فاصله، پالایه برای همۀ کارهای متن هر زبانی اعمال می‌شود‌."
#. i18n: file libkttsd/selecttalkerwidget.ui line 385
#: rc.cpp:444 rc.cpp:534 rc.cpp:615 rc.cpp:717
#, no-c-format
msgid ""
"Click to select one or more languages. This filter will be applied to text "
"jobs of those languages."
msgstr ""
"فشار دهید تا یک یا بیش از یک زبان گزینش شود‌‌. این پالایه برای کارهای متن آن "
"زبانها اعمال می‌شود‌."
#. i18n: file libkttsd/selecttalkerwidget.ui line 421
#: rc.cpp:447
#, no-c-format
msgid "Use specific &Talker"
msgstr "استفاده از &گویندۀ مشخص‌"
#. i18n: file libkttsd/selecttalkerwidget.ui line 424
#: rc.cpp:450
#, no-c-format
msgid ""
"When checked, will use the specific Talker (if it is still configured), "
"otherwise the Talker most closely matching."
msgstr ""
"زمانی که علامت زده شد، از گویندۀ مشخص )اگر هنوز پیکربندی شده است( استفاده "
"می‌کند؛ در غیر این صورت از گوینده‌ای که به تطابق نزدیک‌تر است استفاده می‌کند‌‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 33
#: rc.cpp:474
#, no-c-format
msgid ""
"<b>WARNING: This filter is a key component of the KTTS system. Please read the "
"KTTS Handbook before modifying these settings.</b>"
msgstr ""
"<b>اخطار: این پالایه مؤلفۀ کلید سیستم KTTSمیباشد. لطفاً کتابِ مرجع KTTS را "
"پیش از تغییر این تنظیمات بخوانید‌‌.</b>"
#. i18n: file filters/sbd/sbdconfwidget.ui line 49
#: rc.cpp:477 rc.cpp:582 rc.cpp:684 rc.cpp:771
#, no-c-format
msgid "&Name:"
msgstr "&نام:"
#. i18n: file filters/sbd/sbdconfwidget.ui line 58
#: rc.cpp:480 rc.cpp:486
#, no-c-format
msgid "The name of this filter. Enter any descriptive name you like."
msgstr "نام این پالایه‌‌. هر نام توصیفی که می‌خواهید وارد کنید‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 67
#: filters/sbd/sbdconf.cpp:171 kttsd/filtermgr.cpp:83 rc.cpp:483
#, no-c-format
msgid "Standard Sentence Boundary Detector"
msgstr "آشکارساز کرانۀ جملۀ استاندارد"
#. i18n: file filters/sbd/sbdconfwidget.ui line 88
#: rc.cpp:489
#, no-c-format
msgid "&Sentence boundary regular expression:"
msgstr "عبارت منظم کرانۀ &جمله:"
#. i18n: file filters/sbd/sbdconfwidget.ui line 97
#: rc.cpp:492 rc.cpp:495
#, no-c-format
msgid ""
"The regular expression that detects boundaries between sentences in text jobs."
msgstr "عبارت منظم، که کرانه‌های بین جمله‌ها را در کارهای متن آشکار می‌کند‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 132
#: rc.cpp:501
#, no-c-format
msgid "&Replacement sentence boundary:"
msgstr "&جایگزینی کرانۀ جمله:"
#. i18n: file filters/sbd/sbdconfwidget.ui line 141
#: rc.cpp:504 rc.cpp:507
#, no-c-format
msgid ""
"This string replaces the matched regular expression. <b>Important</b>"
": must end with tab (\\t)."
msgstr ""
"این رشته، عبارت منظم تطابق‌شده را جایگزین می‌کند‌‌. <b>مهم</b>"
":باید با جهش )\\t( پایان یابد‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 160
#: rc.cpp:510 rc.cpp:591 rc.cpp:789
#, no-c-format
msgid "Apply This &Filter When"
msgstr "این &پالایه را زمانی اعمال کنید که‌"
#. i18n: file filters/sbd/sbdconfwidget.ui line 163
#: rc.cpp:513 rc.cpp:594 rc.cpp:696 rc.cpp:792
#, no-c-format
msgid "These settings determines when the filter is applied to text."
msgstr ""
"این تنظیمات، زمانی که پالایه برای متن به کار رفته است را تعیین می‌کند‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 182
#: rc.cpp:516
#, no-c-format
msgid "&Language is:"
msgstr "&زبان یعنی:"
#. i18n: file filters/sbd/sbdconfwidget.ui line 191
#: rc.cpp:519 rc.cpp:528 rc.cpp:600 rc.cpp:609
#, no-c-format
msgid ""
"This filter is applied to text jobs of the specified language. You may select "
"more than one language by clicking the browse button and Ctrl-clicking on more "
"than one in the list. If blank the filter applies to all text jobs of any "
"language."
msgstr ""
"این پالایه برای کارهای متن زبان مشخص‌شده به کار می‌رود‌‌. ممکن است بیش از یک "
"زبان را با فشار دکمۀ مرور و فشار مهار روی بیش از یک زبان در فهرست برگزینید‌‌. "
"در صورت فاصله، پالایه برای همۀ کارهای متن هر زبانی به کار می‌رود‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 200
#: rc.cpp:522 rc.cpp:603 rc.cpp:705
#, no-c-format
msgid "Application &ID contains:"
msgstr " &شناسۀ کاربرد شامل موارد زیر است:"
#. i18n: file filters/sbd/sbdconfwidget.ui line 209
#: rc.cpp:525 rc.cpp:606 rc.cpp:708
#, no-c-format
msgid ""
"Enter a DCOP Application ID. This filter will only apply to text jobs queued "
"by that application. You may enter more than one ID separated by commas. If "
"blank, this filter applies to text jobs queued by all applications. Tip: Use "
"kdcop from the command line to get the Application IDs of running applications. "
" Example: \"konversation, kvirc,ksirc,kopete\""
msgstr ""
"شناسۀ کاربرد DCOP را وارد کنید‌‌. این پالایه، تنها برای کاربردهای متن صف‌شده "
"توسط آن کاربرد به کار می‌رود‌‌. ممکن است بیش از یک شناسه، که با کاما از هم جدا "
"شده‌اند را وارد کنید‌‌. در صورت فاصله، این پالایه برای کارهای متن صف‌شده توسط "
"همۀ کاربردها به کار می‌رود‌‌. نکته: kdcop را از خط فرمان استفاده کنید، تا "
"شناسه‌های کاربرد را از کاربردهای اجرا به دست آورید‌‌. مثال: »konversation، "
"kvirc،ksirc،kopete»"
#. i18n: file filters/sbd/sbdconfwidget.ui line 259
#: rc.cpp:537 rc.cpp:618 rc.cpp:720
#, no-c-format
msgid ""
"<qt>Enter a DCOP Application ID. This filter will only apply to text jobs "
"queued by that application. You may enter more than one ID separated by "
"commas. Use <b>knotify</b> to match all messages sent as TDE notifications. "
"If blank, this filter applies to text jobs queued by all applications. Tip: "
"Use kdcop from the command line to get the Application IDs of running "
"applications. Example: \"konversation, kvirc,ksirc,kopete\"</qt>"
msgstr ""
"<qt> شناسۀ کاربرد DCOPرا وارد کنید‌‌. این پالایه تنها برای کارهای متن صف‌شده "
"توسط آن کاربرد اعمال می‌شود‌‌. ممکن است بیش از یک شناسه که با کاما از هم جدا "
"شده‌اند وارد کنید‌‌. <b>knotify</b> را استفاده کنید تا همۀ پیامها که به صورت "
"اخطارهای TDE فرستاده شده‌اند، تطابق شوند‌‌. در صورت فاصله، این پالایه برای "
"کارهای متن صف‌شده توسط همۀ کاربردها اعمال می‌شود‌‌. نکته: kdcop را از خط فرمان "
"استفاده کنید، تا شناسه‌های کاربرد را از کاربردهای اجرا به دست آورید‌‌. مثال: "
"«konversation، kvirc،ksirc،kopete»</qt>"
#. i18n: file filters/sbd/sbdconfwidget.ui line 287
#: rc.cpp:540 rc.cpp:621
#, no-c-format
msgid "Load..."
msgstr "بار کردن‌..."
#. i18n: file filters/sbd/sbdconfwidget.ui line 293
#: rc.cpp:543
#, no-c-format
msgid "Click to load a Sentence Boundary Detection configuration from a file."
msgstr "فشار دهید تا پیکربندی آشکارسازی کرانۀ جمله از یک پرونده بارگیری شود‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 310
#: rc.cpp:546
#, no-c-format
msgid "Sa&ve..."
msgstr "&ذخیره‌..."
#. i18n: file filters/sbd/sbdconfwidget.ui line 313
#: rc.cpp:549
#, no-c-format
msgid "Click to save this Sentence Boundary Detection configuration to a file."
msgstr ""
"فشار دهید تا این پیکربندی آشکارسازی کرانۀ جمله در یک پرونده ذخیره شود‌."
#. i18n: file filters/sbd/sbdconfwidget.ui line 330
#: rc.cpp:552
#, no-c-format
msgid "Clea&r"
msgstr "&پاک کردن‌"
#. i18n: file filters/sbd/sbdconfwidget.ui line 333
#: rc.cpp:555 rc.cpp:753
#, no-c-format
msgid "Click to clear everything."
msgstr "فشار دهید تا همه چیز پاک شود‌."
#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 55
#: rc.cpp:558
#, no-c-format
msgid "&Type"
msgstr "&نوع‌"
#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 85
#: rc.cpp:561
#, no-c-format
msgid "&Word"
msgstr "&واژه‌"
#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 104
#: rc.cpp:564
#, no-c-format
msgid "Regular &expression"
msgstr "&عبارت منظم‌"
#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 124
#: rc.cpp:567
#, no-c-format
msgid "Match &case"
msgstr "تطبیق &حالت‌"
#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 158
#: rc.cpp:570
#, no-c-format
msgid "&Replace with:"
msgstr "&جایگزینی با:"
#. i18n: file filters/stringreplacer/editreplacementwidget.ui line 180
#: rc.cpp:573
#, no-c-format
msgid "&Match:"
msgstr "&تطبیق:"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 18
#: rc.cpp:579
#, no-c-format
msgid "Configure String Replacer"
msgstr "پیکربندی جایگزین‌کنندۀ رشته"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 46
#: rc.cpp:585 rc.cpp:588 rc.cpp:687 rc.cpp:690
#, no-c-format
msgid "Enter any name you like for this filter."
msgstr "برای این پالایه، هر نامی‌که می‌خواهید وارد کنید‌."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 87
#: rc.cpp:597
#, no-c-format
msgid "Lan&guage is:"
msgstr "&زبان یعنی:"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 198
#: rc.cpp:624
#, no-c-format
msgid "Click to load a word list from a file."
msgstr "فشار دهید تا فهرست واژه از یک پرونده بار شود."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 218
#: rc.cpp:630
#, no-c-format
msgid "Click to save word list to a file."
msgstr "فشار دهید تا فهرست واژه در پرونده ذخیره شود‌."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 235
#: rc.cpp:633
#, no-c-format
msgid "C&lear"
msgstr "&پاک کردن‌"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 238
#: rc.cpp:636
#, no-c-format
msgid "Click to empty the word list."
msgstr "فشار دهید تا فهرست واژه خالی شود."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 255
#: rc.cpp:639
#, no-c-format
msgid "Type"
msgstr "نوع"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 266
#: rc.cpp:642
#, no-c-format
msgid "Match Case"
msgstr "تطبیق حالت"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 277
#: rc.cpp:645
#, no-c-format
msgid "Match"
msgstr "تطبیق"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 288
#: rc.cpp:648
#, no-c-format
msgid "Replace With"
msgstr "جایگزینی با"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 325
#: kcmkttsmgr/kcmkttsmgr.cpp:171 rc.cpp:651
#, no-c-format
msgid "&Add..."
msgstr "&افزودن..."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 328
#: rc.cpp:654
#, no-c-format
msgid "Click to add another word or regular expression to the list."
msgstr "فشار دهید تا واژه‌ای دیگر یا عبارتی منظم به فهرست اضافه شود‌."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 345
#: rc.cpp:657
#, no-c-format
msgid "&Up"
msgstr "&بالا‌"
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 348
#: rc.cpp:660
#, no-c-format
msgid ""
"Click to move selected word up in the list. Words higher in the list are "
"applied first."
msgstr ""
"فشار دهید تا واژۀ برگزیده در فهرست به بالا برود‌‌. لغاتی که در فهرست بالاترند، "
"اول اعمال می‌شوند‌."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 367
#: rc.cpp:666
#, no-c-format
msgid ""
"Click to move a word down in the list. Words lower in the list are applied "
"last."
msgstr ""
"فشار دهید تا یک واژه در فهرست به پایین برود‌‌. لغاتی که در فهرست پایین‌ترند، "
"آخر اعمال می‌شوند."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 392
#: rc.cpp:672
#, no-c-format
msgid "Click to modify an existing word or regular expression in the list."
msgstr "فشار دهید تا یک واژۀ موجود یا عبارت منظم در فهرست تغییر کند‌."
#. i18n: file filters/stringreplacer/stringreplacerconfwidget.ui line 417
#: rc.cpp:678
#, no-c-format
msgid "Click to remove a word or regular expression from the list."
msgstr "فشار دهید تا یک واژه یا عبارت منظم از فهرست حذف شود‌."
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 18
#: rc.cpp:681
#, no-c-format
msgid "Configure Talker Chooser"
msgstr "پیکربندی انتخاب‌کنندۀ گوینده"
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 65
#: rc.cpp:693
#, no-c-format
msgid "&Apply This Filter When"
msgstr "این پالایه را زمانی &اعمال کنید که‌"
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 87
#: rc.cpp:699
#, no-c-format
msgid "Te&xt contains:"
msgstr " &متن شامل موارد زیر است:"
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 189
#: rc.cpp:723
#, no-c-format
msgid "&Talker:"
msgstr "&گوینده:"
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 195
#: rc.cpp:726 rc.cpp:729
#, no-c-format
msgid ""
"The new Talker that will be used when the conditions above are met. The "
"default Talker is the topmost in the Talkers tab. Click the button to choose a "
"Talker."
msgstr ""
"از گویندۀ جدید در صورت برآورده شدن شرایط بالا استفاده می‌شود‌‌. گویندۀ پیش‌فرض "
"در تب گویندگان، بالاترین است‌‌. دکمه را فشار دهید تا یک گوینده انتخاب شود‌‌."
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 224
#: rc.cpp:735
#, no-c-format
msgid "Click to select a Talker."
msgstr "فشار دهید تا گوینده‌ای انتخاب شود."
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 253
#: rc.cpp:741
#, no-c-format
msgid "Click to load a Talker Chooser configuration from a file."
msgstr "فشار دهید تا پیکربندی انتخاب‌کنندۀ گوینده در یک پرونده بار شود."
#. i18n: file filters/talkerchooser/talkerchooserconfwidget.ui line 273
#: rc.cpp:747
#, no-c-format
msgid "Click to save this Talker Chooser to a file."
msgstr "فشار دهید تا این انتخاب‌کنندۀ گوینده در یک پرونده ذخیره شود‌."
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 17
#: rc.cpp:756
#, no-c-format
msgid "Configure XML Transformer"
msgstr "پیکربندی مبدل XML"
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 36
#: rc.cpp:759 rc.cpp:774
#, no-c-format
msgid "Enter any descriptive name you like for this filter."
msgstr "هر نام توصیفی که می‌خواهید برای این پالایه وارد کنید‌."
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 44
#: rc.cpp:762 rc.cpp:780
#, no-c-format
msgid ""
"Enter the full path to an XML Style Language - Transforms (XSLT) stylesheet "
"file. XSLT files usually end with extension .xsl."
msgstr ""
"مسیر کامل یک زبان سبک XML را وارد کنید - پروندۀ صفحه‌سبک )XSLT( انتقال "
"می‌یابد‌‌. پرونده‌های XSLT معمولاً به پسوند xsl. ختم می‌شوند‌."
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 52
#: rc.cpp:765
#, no-c-format
msgid "xsltproc"
msgstr ""
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 55
#: rc.cpp:768 rc.cpp:786
#, no-c-format
msgid ""
"Enter the path to the xsltproc executable program. If it is in the PATH "
"environment variable, just enter \"xsltproc\"."
msgstr ""
"مسیر برنامۀ اجرایی xsltproc را وارد کنید‌‌. اگر در متغیر محیطی PATH است، تنها "
"«xsltproc» را وارد کنید ."
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 91
#: rc.cpp:777
#, no-c-format
msgid "&XSLT file:"
msgstr "پروندۀ &XSLT:"
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 108
#: rc.cpp:783
#, no-c-format
msgid "xsltproc &executable:"
msgstr "xsltproc &قابل اجرا:"
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 149
#: rc.cpp:795 rc.cpp:807
#, no-c-format
msgid ""
"This filter will be applied only to text having the specified XML root element. "
" If blank, applies to all text. You may enter more than one root element "
"separated by commas. Example: \"html\"."
msgstr ""
"این پالایه تنها برای متنهایی که عنصر ریشه XML مشخص‌شده دارند، اعمال می‌شود‌‌. "
"اگر فاصله باشد، برای همۀ متنها اعمال می‌شود‌‌. ممکن است بیش از یک عنصر ریشه که "
"با کاما از هم جدا شده‌اند، وارد کنید‌‌. مثال: »html«."
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 157
#: rc.cpp:798 rc.cpp:813
#, no-c-format
msgid ""
"This filter will be applied only to text having the specified DOCTYPE "
"specification. If blank, applies to all text. You may enter more than one "
"DOCTYPE separated by commas. Example: \"xhtml\"."
msgstr ""
"این پالایه تنها برای متنهایی که مشخصۀ DOCTYPE مشخص‌شده دارند، اعمال می‌شود‌‌. "
"اگر فاصله باشد، در همۀ متنها اعمال می‌شود‌‌. ممکن است بیش از یک DOCTYPE که با "
"کاما از هم جدا شده‌اند، وارد کنید‌‌. مثال: »xhtml«."
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 165
#: rc.cpp:801 rc.cpp:819
#, no-c-format
msgid ""
"<qt>Enter a DCOP Application ID. This filter will only apply to text queued by "
"that application. You may enter more than one ID separated by commas. Use <b>"
"knotify</b> to match all messages sent as TDE notifications. If blank, this "
"filter applies to text queued by all applications. Tip: Use kdcop from the "
"command line to get the Application IDs of running applications. Example: "
"\"konversation, kvirc,ksirc,kopete\"</qt>"
msgstr ""
"<qt>شناسۀ کاربرد DCOP را وارد کنید‌‌. این پالایه تنها برای متنی که با آن کاربرد "
"صف‌ شده، اعمال می‌شود‌‌. ممکن است بیش از یک شناسه وارد کنید که با کاما از هم "
"جدا شده‌اند‌‌. برای تطبیق همۀ پیامهای ارسالی به صورت اخطارهای TDE، <b>"
"knotify</b> را استفاده کنید‌‌. در صورت فاصله، این پالایه برای متنهای صف‌شده "
"توسط همۀ کاربردها اعمال می‌شود‌‌. نکته: برای به دست آوردن شناسه‌های کاربردی از "
"کاربردهای در حال اجرا، از kdcop استفاده کنید‌‌. مثال: »konversation، "
"kvirc،ksirc،kopete»</qt>"
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 183
#: rc.cpp:804
#, no-c-format
msgid "&Root element is:"
msgstr "عنصر &ریشه این است:"
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 201
#: rc.cpp:810
#, no-c-format
msgid "or DOC&TYPE is:"
msgstr "یا DOC&TYPE یعنی:"
#. i18n: file filters/xmltransformer/xmltransformerconfwidget.ui line 218
#: rc.cpp:816
#, no-c-format
msgid "and Application &ID contains:"
msgstr "و &شناسۀ کاربرد شامل موارد زیر می‌شود:"
#. i18n: file plugins/command/commandconfwidget.ui line 30
#: rc.cpp:822
#, no-c-format
msgid "Co&mmand Configuration"
msgstr "پیکربندی &فرمان‌"
#. i18n: file plugins/command/commandconfwidget.ui line 61
#: rc.cpp:825
#, no-c-format
msgid "Command &for speaking texts:"
msgstr "فرمان &برای متنهای گفتاری:"
#. i18n: file plugins/command/commandconfwidget.ui line 72
#: rc.cpp:828
#, no-c-format
msgid ""
"This field specifies both the command used for speaking texts and its "
"parameters. If you want to pass the text as a parameter, write %t at the place "
"where the text should be inserted. To pass a file of the text, write %f. To "
"synthesize only and let KTTSD play the synthesized text, write %w for the "
"generated audio file."
msgstr ""
"این حوزه، هم فرمانی که برای متنهای گفتاری استفاده می‌شوند و هم پارامترهای آن را "
"مشخص می‌کند‌‌. اگر می‌خواهید از متنی به عنوان یک پارامتر بگذرید، جایی که متن "
"باید درج شود را %t بنویسید‌‌. برای عبور پروندۀ متن %f بنویسید‌‌. فقط برای "
"ترکیب‌دهی و این که اجازه دهید تا KTTSD متن ترکیب‌شده را اجرا کند، %w را برای "
"پروندۀ صوتی تولید‌شده بنویسید‌."
#. i18n: file plugins/command/commandconfwidget.ui line 88
#: rc.cpp:831
#, no-c-format
msgid "&Send the data as standard input"
msgstr "&ارسال داده به عنوان ورودی استاندارد‌"
#. i18n: file plugins/command/commandconfwidget.ui line 91
#: rc.cpp:834
#, no-c-format
msgid ""
"This check box specifies whether the text is sent as standard input (stdin) to "
"the speech synthesizer."
msgstr ""
"این جعبه بررسی مشخص می‌کند، که آیا متن به عنوان ورودی استاندارد )stdin( به "
"ترکیب‌دهندۀ گفتار ارسال می‌شود."
#. i18n: file plugins/command/commandconfwidget.ui line 116
#: rc.cpp:837 rc.cpp:946 rc.cpp:1036 rc.cpp:1072 rc.cpp:1186
#, no-c-format
msgid "&Test"
msgstr "&آزمون‌"
#. i18n: file plugins/command/commandconfwidget.ui line 142
#: rc.cpp:840 rc.cpp:865 rc.cpp:1180
#, no-c-format
msgid "Character &encoding:"
msgstr "&کدبندی نویسه:"
#. i18n: file plugins/command/commandconfwidget.ui line 161
#: rc.cpp:843 rc.cpp:1045
#, no-c-format
msgid ""
"This combo box specifies which character encoding is used for passing the text."
msgstr ""
"این جعبه ترکیب مشخص می‌کند، که کدام کدبندی نویسه برای گذر از متن استفاده "
"می‌شود‌."
#. i18n: file plugins/command/commandconfwidget.ui line 175
#: rc.cpp:846
#, no-c-format
msgid ""
"Parameters:\n"
" %t: Text to be spoken\n"
" %f: Filename of a temporary file containing the text\n"
" %l: Language (two letter code)\n"
" %w: Filename of a temporary file for generated audio"
msgstr ""
"پارامترها:\n"
" %t: متنی که باید گفته شود\n"
" %f: نام پروندۀ موقت شامل متن\n"
" %l: (زبان )کد دو حرفی\n"
" %w: نام پروندۀ موقت برای صوتی ایجادشده"
#. i18n: file plugins/epos/eposconfwidget.ui line 25
#: rc.cpp:853
#, no-c-format
msgid "Epos Config UI"
msgstr ""
#. i18n: file plugins/epos/eposconfwidget.ui line 28
#: rc.cpp:856 rc.cpp:862
#, no-c-format
msgid ""
"This is the configuration dialog for the Epos Czech and Slovak speech "
"synthesizer."
msgstr "محاورۀ پیکربندی، برای ترکیب‌دهندۀ گفتار Epos Czech و Slovak می‌باشد‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 53
#: rc.cpp:859
#, no-c-format
msgid "E&pos Configuration"
msgstr "پیکربندی E&pos"
#. i18n: file plugins/epos/eposconfwidget.ui line 108
#: rc.cpp:868
#, no-c-format
msgid "Specifies which character encoding is used for passing the text."
msgstr "مشخص می‌کند کدام کدبندی نویسه برای گذر از متن استفاده می‌شود‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 142
#: rc.cpp:871 rc.cpp:1129
#, no-c-format
msgid "Speed:"
msgstr "سرعت:"
#. i18n: file plugins/epos/eposconfwidget.ui line 148
#: rc.cpp:874 rc.cpp:886 rc.cpp:895
#, no-c-format
msgid ""
"Sets the speed of speech. Slide the slider to the left to slow speech down; to "
"the right to increase talking speed. Anything less than 75 percent is "
"considered \"slow\", and anything greater than 125 percent is considered "
"\"fast\"."
msgstr ""
"سرعت گفتار را تنظیم می‌کند‌‌. لغزان را به چپ بلغزانید تا گفتار آهسته شود، و "
"برای افزایش سرعت گفتار به راست بلغزانید‌‌. مقادیر کمتر از ۷۵ درصد »کند« در نظر "
"گرفته می‌شوند و مقادیر بیشتر از ۱۲۵ درصد »تند« می‌باشند‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 164
#: rc.cpp:877
#, no-c-format
msgid "Pitch:"
msgstr "ارتفاع صدا:"
#. i18n: file plugins/epos/eposconfwidget.ui line 170
#: rc.cpp:880 rc.cpp:892 rc.cpp:898
#, no-c-format
msgid ""
"Sets the tone (frequency) of speech. Slide the slider to the left to lower the "
"voice tone; to the right to increase tone. Anything less than 75 percent is "
"considered \"low\", and anything greater than 125 percent is considered "
"\"high\"."
msgstr ""
"نوا )بسامد(، گفتار را تنظیم می‌کند‌‌. لغزان را به چپ بلغزانید تا نوای صدا کمتر "
"شود‌‌. مقادیر کمتر از ۷۵ درصد »کند« در نظر گرفته می‌شوند و مقادیر بیشتر از ۱۲۵ "
"درصد »تند« می‌باشند‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 346
#: rc.cpp:901
#, no-c-format
msgid "Epos server executable path:"
msgstr "مسیر اجرایی کارساز Epos:"
#. i18n: file plugins/epos/eposconfwidget.ui line 355
#: rc.cpp:904 rc.cpp:916
#, no-c-format
msgid ""
"If the Epos server program will be found due to your PATH environment variable, "
"simply enter \"epos\", otherwise enter the full path to the Epos server "
"executable program."
msgstr ""
"اگر برنامۀ کارساز Epos به علت ‌متغیر محیطی PATH شما پیدا می‌شود، کافی است "
"»epos« را وارد کنید، در غیر این صورت، مسیر کامل را برای برنامۀ اجرایی کارساز "
"Epos وارد کنید‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 371
#: rc.cpp:907
#, no-c-format
msgid "Epos client executable path:"
msgstr "مسیر اجرایی کارخواه Epos:"
#. i18n: file plugins/epos/eposconfwidget.ui line 380
#: rc.cpp:910 rc.cpp:922
#, no-c-format
msgid ""
"If the Epos client program will be found due to the PATH environment variable, "
"simply enter \"say\" here. Otherwise, specify the full path to the Epos client "
"program."
msgstr ""
"اگر برنامۀ کارخواه Epos به علت ‌متغیر محیطی PATH پیدا می‌شود،کافی است »گفتن« "
"را در اینجا وارد کنید‌‌. در غیر این صورت، مسیر کامل را برای برنامۀ کارخواه Epos "
"مشخص کنید‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 406
#: rc.cpp:913
#, no-c-format
msgid "epos"
msgstr ""
#. i18n: file plugins/epos/eposconfwidget.ui line 425
#: rc.cpp:919
#, no-c-format
msgid "say"
msgstr "گفتن"
#. i18n: file plugins/epos/eposconfwidget.ui line 440
#: rc.cpp:925
#, no-c-format
msgid "Additional Options (advanced)"
msgstr "گزینه‌های اضافی)پیشرفته("
#. i18n: file plugins/epos/eposconfwidget.ui line 467
#: rc.cpp:928 rc.cpp:937
#, no-c-format
msgid ""
"Optional. Enter any server command line options here. To see available "
"options, enter \"epos -h\" in a terminal. Do not use \"-o\"."
msgstr ""
"اختیاری‌‌. هر کدام از گزینه‌های خط فرمان کارساز را که می‌خواهید، در اینجا وارد "
"کنید‌‌. برای دیدن گزینه‌های موجود، »epos -h« را در پایانه‌ای وارد کنید‌‌. از "
"»-o« استفاده نکنید‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 475
#: rc.cpp:931
#, no-c-format
msgid ""
"Specify options to be passed to Epos client. To see available options, enter "
"\"say -h\" in a terminal. Do not use \"-o\"."
msgstr ""
"مشخص کنید که آیا گزینه‌ها از کارخواه Epos گذشته‌اند؟ برای دیدن گزینه‌های موجود، "
"«say -h» را در پایانه وارد کنید‌‌. از «-o» استفاده نکنید‌. "
#. i18n: file plugins/epos/eposconfwidget.ui line 501
#: rc.cpp:934
#, no-c-format
msgid "Epos server:"
msgstr "کارساز Epos:"
#. i18n: file plugins/epos/eposconfwidget.ui line 526
#: rc.cpp:940
#, no-c-format
msgid "Epos client:"
msgstr "کارخواه Epos:"
#. i18n: file plugins/epos/eposconfwidget.ui line 535
#: rc.cpp:943
#, no-c-format
msgid ""
"Specify options to be passed to Epos client. Do not use -o. To see available "
"options, enter \"say -h\" in a terminal. Do not use \"-o\"."
msgstr ""
"مشخص کنید که آیا گزینه‌ها از کارخواه Epos گذشته‌اند؟ از -o استفاده نکنید‌‌. "
"برای دیدن گزینه‌های موجود، »say -h« را در پایانه وارد کنید‌‌. از »-o« استفاده "
"نکنید‌."
#. i18n: file plugins/epos/eposconfwidget.ui line 577
#: rc.cpp:949
#, no-c-format
msgid ""
"Click to test the configuration. If correct, you will hear a sentence spoken."
msgstr ""
"برای آزمودن پیکربندی، فشار دهید‌‌. اگر درست باشد، جمله‌ای گفته می‌شود‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 25
#: rc.cpp:952
#, no-c-format
msgid "Festival Config UI"
msgstr ""
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 28
#: rc.cpp:955 rc.cpp:961
#, no-c-format
msgid ""
"This is the dialog for configuring the Festival speech synthesizer in "
"interactive mode."
msgstr ""
"این محاوره‌ای برای پیکربندی ترکیب‌دهندۀ گفتار Festival در حالت تعاملی "
"می‌باشد‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 53
#: rc.cpp:958
#, no-c-format
msgid "Festival &Interactive Configuration"
msgstr "پیکربندی &تعاملی Festival"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 95
#: rc.cpp:964
#, no-c-format
msgid "&Festival executable:"
msgstr "&Festival قابل اجرا:"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 104
#: rc.cpp:967 rc.cpp:970
#, no-c-format
msgid ""
"If Festival is in your PATH environment variable, just enter \"festival\", "
"otherwise specify the full path to the Festival executable program."
msgstr ""
"اگر Festival در متغیر محیطی PATH شما است، تنها »festival« را وارد کنید، در غیر "
"این صورت، مسیر کامل را برای برنامۀ قابل اجرای Festival مشخص کنید‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 144
#: rc.cpp:973
#, no-c-format
msgid "&Select voice:"
msgstr "&برگزیدن صدا:"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 153
#: rc.cpp:976 rc.cpp:979
#, no-c-format
msgid ""
"Select a voice to speak text with. MultiSyn voices are high quality but are "
"slow to load. If no voices are shown, check the Festival executable path. You "
"must install at least one Festival voice. If you have installed a voice and "
"still none are shown, check your Festival configuration. (See the README that "
"comes with Festival.)"
msgstr ""
"صدایی برگزینید تا متن با آن گفته شود‌‌. صداهای چند ترکیبی از کیفیت بالاتری "
"برخوردارند؛ اما از نظر بارگیری کند هستند‌‌. اگر هیچ صدایی نشان داده نشود، مسیر "
"قابل اجرای Festival را بررسی کنید‌‌. باید در نهایت یک صدای Festival نصب کنید‌‌. "
"اگر صدایی را نصب کرده‌اید و هنوز چیزی نشان داده نشده است، پیکربندی Festival خود "
"را بررسی کنید‌. )README که با Festival می‌آید را ملاحظه کنید‌.("
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 177
#: rc.cpp:982
#, no-c-format
msgid "&Rescan"
msgstr "&پویش مجدد‌"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 218
#: rc.cpp:988 rc.cpp:1006 rc.cpp:1021
#, no-c-format
msgid ""
"Sets the volume (loudness) of speech. Slide the slider to the left to lower "
"the volume; to the right to increase volume. Anything less than 75 percent is "
"considered \"soft\", and anything greater than 125 percent is considered "
"\"loud\"."
msgstr ""
"حجم )بلندی( گفتار را تنظیم می‌کند‌‌. برای حجم صدای پایین‌تر لغزان را به چپ "
"بلغزانید، در صورت لغزاندن به راست حجم صدا افزایش می‌یابد‌‌. مقادیر کمتر از ۷۵ "
"درصد »ملایم« و بیشتر از ۱۲۵ درصد »بلند« در نظر گرفته می‌شوند‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 234
#: rc.cpp:991
#, no-c-format
msgid "Sp&eed:"
msgstr "&سرعت:"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 256
#: rc.cpp:997 rc.cpp:1144
#, no-c-format
msgid "&Pitch:"
msgstr "&ارتفاع صدا:"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 262
#: rc.cpp:1000 rc.cpp:1018 rc.cpp:1027
#, no-c-format
msgid ""
"Sets the tone (frequency) of speech. Slide the slider to the left to lower the "
"voice tone; to the right to increase tone. Anything less than 75 percent is "
"considered \"low\", and anything greater than 125 percent is considered "
"\"high\". You cannot change the pitch of MultiSyn voices."
msgstr ""
"نوا )بسامد(، گفتار را تنظیم می‌کند‌‌. برای نوای صدای پایین‌تر لغزان را به چپ "
"بلغزانید، در صورت لغزاندن به راست نوای صدا افزایش می‌یابد‌.  هر مقدار کمتر از "
"۷۵ درصد»کم« و بیش از ۱۲۵ درصد »زیاد« در نظر گرفته می‌شوند‌‌. شما نمی‌توانید "
"ارتفاع صداهای چند ترکیبی را تغییر دهید‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 485
#: rc.cpp:1030
#, no-c-format
msgid "&Load this voice when starting KTTSD"
msgstr "این صدا را هنگام آغاز KTTSD &بار کنید‌"
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 488
#: rc.cpp:1033
#, no-c-format
msgid ""
"If checked, Festival will be started and this voice will be loaded when the "
"Text-to-Speech Deamon (KTTSD) is started. Check when a voice requires a long "
"time to load in Festival (for example, multisyn voices), otherwise, leave "
"unchecked."
msgstr ""
"در صورت علامت زدن، Festival آغاز می‌شود، و این صدا هنگام آغاز شبح متن به "
"گفتار)KTTSD ( بار می‌شود‌‌. هنگامی که صدایی به زمانی طولانی برای بارگذاری در "
"Festival )مثلاً، صداهای چند ترکیبی( نیاز دارد، علامت بزنید؛ در غیر این صورت "
"بدون علامت بگذارید‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 516
#: rc.cpp:1039
#, no-c-format
msgid ""
"Click to test the configuration. Festival will be started and a test sentence "
"will be spoken."
msgstr ""
"برای آزمودن پیکربندی فشار دهید‌‌. Festival آغاز شده و به آن جملۀ آزمون گفته "
"می‌شود‌."
#. i18n: file plugins/festivalint/festivalintconfwidget.ui line 542
#: rc.cpp:1042
#, no-c-format
msgid "Character e&ncoding:"
msgstr "&کدبندی نویسه:"
#. i18n: file plugins/flite/fliteconfwidget.ui line 25
#: rc.cpp:1048
#, no-c-format
msgid "Flite Config UI"
msgstr ""
#. i18n: file plugins/flite/fliteconfwidget.ui line 28
#: rc.cpp:1051 rc.cpp:1057
#, no-c-format
msgid ""
"This is the configuration dialog for the Festival Lite (Flite) speech synthesis "
"engine."
msgstr ""
"این محاورۀ پیکربندی موتور ترکیب‌دهی گفتار برای Festival Lite (Flite) می‌باشد‌."
#. i18n: file plugins/flite/fliteconfwidget.ui line 70
#: rc.cpp:1054
#, no-c-format
msgid "Festival &Lite (flite) Configuration"
msgstr "پیکربندی) Festival &Lite (flite"
#. i18n: file plugins/flite/fliteconfwidget.ui line 112
#: rc.cpp:1060
#, no-c-format
msgid "&Flite executable path:"
msgstr "مسیر قابل اجرای &Flite:"
#. i18n: file plugins/flite/fliteconfwidget.ui line 121
#: rc.cpp:1063 rc.cpp:1069
#, no-c-format
msgid ""
"If Flite is in your PATH environment variable, simply enter \"flite\", "
"otherwise specify the complete path to the Flite executable program."
msgstr ""
"اگر Flite در ‌متغیر محیطی PATH شماست، کافی است »flite« را وارد کنید، در غیر این "
"صورت، مسیر کامل برای برنامۀ قابل اجرای Flite را مشخص کنید‌."
#. i18n: file plugins/flite/fliteconfwidget.ui line 137
#: rc.cpp:1066
#, no-c-format
msgid "flite"
msgstr ""
#. i18n: file plugins/freetts/freettsconfigwidget.ui line 25
#: rc.cpp:1075
#, no-c-format
msgid "FreeTTS Config UI"
msgstr ""
#. i18n: file plugins/freetts/freettsconfigwidget.ui line 67
#: rc.cpp:1078
#, no-c-format
msgid "FreeTTS Interactive Configuration"
msgstr "پیکربندی تعاملی FreeTTS"
#. i18n: file plugins/freetts/freettsconfigwidget.ui line 106
#: rc.cpp:1081
#, no-c-format
msgid "&FreeTTS jar file:"
msgstr "پروندۀ &FreeTTSjar:"
#. i18n: file plugins/freetts/freettsconfigwidget.ui line 179
#: rc.cpp:1084
#, no-c-format
msgid "Test"
msgstr "آزمون"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 16
#: rc.cpp:1087
#, no-c-format
msgid "Hadifix Configuration"
msgstr "پیکربندی Hadifix"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 19
#: rc.cpp:1090 rc.cpp:1096
#, no-c-format
msgid ""
"This is the configuration dialog for the Hadifix (txt2pho and Mbrola) speech "
"synthesizer."
msgstr ""
"محاورۀ پیکربندی برای ترکیب‌ده گفتار Hadifix (txt2pho و Mbrola) می‌باشد‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 44
#: rc.cpp:1093
#, no-c-format
msgid "Had&ifix Configuration"
msgstr "پیکربندی Had&ifix"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 78
#: rc.cpp:1099
#, no-c-format
msgid "&Basic Options"
msgstr "گزینه‌های &پایه‌ای‌"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 97
#: rc.cpp:1102
#, no-c-format
msgid "&Voice file:"
msgstr "پروندۀ &صوتی:"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 103
#: rc.cpp:1105 rc.cpp:1108
#, no-c-format
msgid ""
"Select a voice for speaking text. If no voices are listed, check your Mbrola "
"configuration. You must install at least one voice."
msgstr ""
"صدایی برای متن گفتار برگزینید‌‌. اگر صدایی فهرست نشده است، پیکربندی Mbrolaتان "
"را بررسی کنید‌‌. باید در نهایت صدایی نصب کنید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 135
#: rc.cpp:1111
#, no-c-format
msgid "&Select..."
msgstr "&گزینش‌..."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 151
#: rc.cpp:1114
#, no-c-format
msgid "Volume &ratio:"
msgstr "&نسبت حجم صدا:"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 157
#: rc.cpp:1117 rc.cpp:1123 rc.cpp:1126
#, no-c-format
msgid ""
"Adjusts the volume of speech. Slide to left for softer speech; to the right "
"for louder."
msgstr ""
"حجم گفتار را میزان می‌کند‌‌. برای گفتار با حجم ملایم‌تر به چپ و برای حجم بلندتر "
"به راست بلغزانید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 245
#: rc.cpp:1132 rc.cpp:1138 rc.cpp:1141
#, no-c-format
msgid ""
"Adjusts the speed of speech. Slide to left for slower speech; to the right for "
"faster."
msgstr ""
"سرعت گفتار را میزان می‌کند‌‌. برای گفتار آهسته‌تر به چپ و برای گفتار سریع‌تر به "
"راست بلغزانید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 327
#: rc.cpp:1147 rc.cpp:1153 rc.cpp:1156
#, no-c-format
msgid ""
"Adjusts the pitch (tone) of speech. Slide to left for lower speech; to the "
"right for higher."
msgstr ""
"ارتفاع صدا )نوا(ی گفتار را میزان می‌کند‌‌. برای گفتار ملایم‌تر به چپ و برای "
"گفتار بلندتر به راست بلغزانید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 399
#: rc.cpp:1159
#, no-c-format
msgid "&Advanced Options"
msgstr "گزینه‌های &پیشرفته‌"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 416
#: rc.cpp:1162
#, no-c-format
msgid "txt2pho e&xecutable:"
msgstr "txt2pho &قابل اجرا:"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 422
#: rc.cpp:1165 rc.cpp:1168
#, no-c-format
msgid ""
"If the txt2pho program is in your PATH environment variable, simply enter "
"\"txt2pho\", otherwise specify the full path to the txt2pho executable program."
msgstr ""
"اگر برنامۀ txt2pho در متغیر محیطی PATH شماست، کافی است »txt2pho« را وارد "
"کنید‌‌. در غیر این صورت، مسیر کامل برای برنامۀ قابل اجرای txt2pho را مشخص "
"کنید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 446
#: rc.cpp:1171
#, no-c-format
msgid "&Mbrola executable:"
msgstr "&Mbrola قابل اجرا:"
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 452
#: rc.cpp:1174 rc.cpp:1177
#, no-c-format
msgid ""
"If the Mbrola program is in your PATH environment variable, simply enter "
"\"mbrola\", otherwise specify the full path to the Mbrola executable program."
msgstr ""
"اگر برنامۀ Mbrola در متغیر محیطی PATH شماست، کافی است »mbrola« را وارد کنید‌‌. "
"در غیر این صورت، مسیر کامل برای برنامۀ قابل اجرای Mbrola را مشخص کنید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 511
#: rc.cpp:1183
#, no-c-format
msgid ""
"This combo box specifies which character encoding is used for passing the text. "
" For most western languages, use ISO-8859-1. For Hungarian, use ISO-8859-2."
msgstr ""
"این جعبه ترکیب مشخص می‌کند، که کدام کدبندی نویسه برای گذر از متن استفاده "
"می‌شود‌‌. برای اغلب زبانهای غربی، از ISO-8859-1 استفاده کنید‌‌. برای مجارستانی، "
"ISO-8859-2 را استفاده کنید‌."
#. i18n: file plugins/hadifix/hadifixconfigui.ui line 551
#: rc.cpp:1189
#, no-c-format
msgid "Click to test the configuration. You should hear a spoken sentence."
msgstr "فشار دهید تا پیکربندی آزموده شود‌‌. باید یک جمله گفته شود‌."
#. i18n: file plugins/hadifix/voicefileui.ui line 16
#: rc.cpp:1192
#, no-c-format
msgid "Selecting Voice File"
msgstr "برگزیدن پروندۀ صوتی"
#. i18n: file plugins/hadifix/voicefileui.ui line 33
#: rc.cpp:1195
#, no-c-format
msgid "Path of the voice file:"
msgstr "مسیر پروندۀ صوتی:"
#. i18n: file plugins/hadifix/voicefileui.ui line 69
#: rc.cpp:1201
#, no-c-format
msgid "Female"
msgstr "مؤنث"
#. i18n: file plugins/hadifix/voicefileui.ui line 77
#: rc.cpp:1204
#, no-c-format
msgid "Male"
msgstr "مذکر"
#. i18n: file plugins/hadifix/voicefileui.ui line 85
#: rc.cpp:1207
#, no-c-format
msgid "Try to Determine From Voice File"
msgstr "سعی کنید که از پروندۀ صدا تعیین شود"
#. i18n: file plugins/festivalint/voices line 14
#: rc.cpp:1210 rc.cpp:1213 rc.cpp:1333 rc.cpp:1339 rc.cpp:1345 rc.cpp:1351
#: rc.cpp:1360
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Male"
msgstr "مذکر آمریکایی"
#. i18n: file plugins/festivalint/voices line 38
#: rc.cpp:1216
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Female, MBROLA"
msgstr "مؤنث آمریکایی، MBROLA"
#. i18n: file plugins/festivalint/voices line 50
#: rc.cpp:1219 rc.cpp:1222
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Male, MBROLA"
msgstr "مذکر آمریکایی، MBROLA"
#. i18n: file plugins/festivalint/voices line 74
#: rc.cpp:1225 rc.cpp:1228 rc.cpp:1363
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"British Male"
msgstr " مذکر انگلیسی"
#. i18n: file plugins/festivalint/voices line 98
#: rc.cpp:1231
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Castilian Spanish Male"
msgstr "مذکر اسپانیایی کاستیلینی"
#. i18n: file plugins/festivalint/voices line 110
#: rc.cpp:1234 rc.cpp:1246 rc.cpp:1249
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Male, HTS"
msgstr "مذکر آمریکایی، HTS"
#. i18n: file plugins/festivalint/voices line 122
#: rc.cpp:1237
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Female, HTS"
msgstr "مؤنث آمریکایی، HTS"
#. i18n: file plugins/festivalint/voices line 134
#: rc.cpp:1240
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Canadian English Male, HTS"
msgstr "مذکر انگلیسی کانادایی، HTS"
#. i18n: file plugins/festivalint/voices line 146
#: rc.cpp:1243
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Scottish Male, HTS"
msgstr "مذکر اسکاتلندی، HTS"
#. i18n: file plugins/festivalint/voices line 182
#: rc.cpp:1252
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Canadian English Male, MultiSyn"
msgstr "مذکر انگلیسی کانادایی، MultiSyn )چند ترکیبی("
#. i18n: file plugins/festivalint/voices line 194
#: rc.cpp:1255
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Scottish Male, MultiSyn"
msgstr "مذکر اسکاتلندی، MultiSyn )چند ترکیبی("
#. i18n: file plugins/festivalint/voices line 206
#: rc.cpp:1258 rc.cpp:1264
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"German Female, Festival"
msgstr "مؤنث آلمانی، Festival"
#. i18n: file plugins/festivalint/voices line 218
#: rc.cpp:1261
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"German Male, Festival"
msgstr "مذکر آلمانی، Festival"
#. i18n: file plugins/festivalint/voices line 242
#: rc.cpp:1267
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Mexican Spanish Male, OGC"
msgstr "مذکر اسپانیایی مکزیکی، OGC"
#. i18n: file plugins/festivalint/voices line 254
#: rc.cpp:1270
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Mexican Spanish Female, OGC"
msgstr "مؤنث اسپانیایی مکزیکی، OGC"
#. i18n: file plugins/festivalint/voices line 266
#: rc.cpp:1273 rc.cpp:1276 rc.cpp:1279 rc.cpp:1288
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Male, OGC"
msgstr "مذکر آمریکایی، OGC"
#. i18n: file plugins/festivalint/voices line 302
#: rc.cpp:1282 rc.cpp:1291
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Female, OGC"
msgstr "مؤنث آمریکایی، OGC"
#. i18n: file plugins/festivalint/voices line 314
#: rc.cpp:1285
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"British Male, OGC"
msgstr "مذکر انگلیسی، OGC"
#. i18n: file plugins/festivalint/voices line 350
#: rc.cpp:1294
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Finnish Male"
msgstr "مذکر فنلاندی"
#. i18n: file plugins/festivalint/voices line 362
#: rc.cpp:1297
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Czech Male, MBROLA"
msgstr "مذکر چکی، MBROLA"
#. i18n: file plugins/festivalint/voices line 374
#: rc.cpp:1300
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Polish Male"
msgstr "مذکر لهستانی"
#. i18n: file plugins/festivalint/voices line 386
#: rc.cpp:1303
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Russian Male"
msgstr "مذکر روسی"
#. i18n: file plugins/festivalint/voices line 398
#: rc.cpp:1306 rc.cpp:1315 rc.cpp:1318
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Italian Male"
msgstr "مذکر ایتالیایی"
#. i18n: file plugins/festivalint/voices line 410
#: rc.cpp:1309 rc.cpp:1312 rc.cpp:1321
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Italian Female"
msgstr "مؤنث ایتالیایی"
#. i18n: file plugins/festivalint/voices line 470
#: rc.cpp:1324
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Kiswahili Male"
msgstr "مذکر Kiswahili"
#. i18n: file plugins/festivalint/voices line 484
#: rc.cpp:1327
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Ibibio Female"
msgstr "مؤنث Ibibio"
#. i18n: file plugins/festivalint/voices line 496
#: rc.cpp:1330
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Zulu Male"
msgstr "مذکر ناتالی"
#. i18n: file plugins/festivalint/voices line 520
#: rc.cpp:1336 rc.cpp:1342 rc.cpp:1348 rc.cpp:1354 rc.cpp:1357
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"American Female"
msgstr "مؤنث آمریکایی"
#. i18n: file plugins/festivalint/voices line 640
#: rc.cpp:1366
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"British Female"
msgstr "مؤنث انگلیسی"
#. i18n: file plugins/festivalint/voices line 652
#: rc.cpp:1369
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"French Canadian Male"
msgstr "مذکر کانادایی فرانسوی"
#. i18n: file plugins/festivalint/voices line 664
#: rc.cpp:1372
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"French Canadian Female"
msgstr "مؤنث کانادایی فرانسوی"
#. i18n: file plugins/festivalint/voices line 676
#: rc.cpp:1375
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"German Male"
msgstr "مذکر آلمانی"
#. i18n: file plugins/festivalint/voices line 688
#: rc.cpp:1378
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"German Female"
msgstr "مؤنث آلمانی"
#. i18n: file plugins/festivalint/voices line 700
#: rc.cpp:1381
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Americas Spanish Male"
msgstr "مذکر اسپانیایی آمریکایی"
#. i18n: file plugins/festivalint/voices line 712
#: rc.cpp:1384
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Americas Spanish Female"
msgstr "مؤنث اسپانیایی آمریکایی"
#. i18n: file plugins/festivalint/voices line 724
#: rc.cpp:1387
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Vietnamese Male"
msgstr "مذکر ویتنامی"
#. i18n: file plugins/festivalint/voices line 735
#: rc.cpp:1390
#, no-c-format
msgid ""
"_: FestivalVoiceName\n"
"Vietnamese Female"
msgstr "مؤنث ویتنامی"
#: filters/main.cpp:44
msgid "Name of a KTTSD filter plugin (required)"
msgstr "نام وصلۀ پالایه KTTSD )مورد نیاز("
#: filters/main.cpp:46
msgid "Talker code passed to filter"
msgstr "کد گوینده که از پالایه گذر کرده است"
#: filters/main.cpp:48
msgid "DCOP application ID passed to filter"
msgstr "شناسۀ کاربرد DCOP که از پالایه گذر کرده است"
#: filters/main.cpp:52
msgid ""
"_: A string that appears in a single config file, not a group of config files\n"
"Config file group name passed to filter"
msgstr "نام گروه پروندۀ پیکربندی که از پالایه عبور کرده است"
#: filters/main.cpp:53
msgid "Display list of available Filter PlugIns and exit"
msgstr "نمایش فهرست وصله‌های پالایۀ موجود و خروج"
#: filters/main.cpp:55
msgid "Display tabs as \\t, otherwise they are removed"
msgstr "نمایش کلیدهای جهش به صورت \\t، در غیر این صورت حذف می‌شوند‌."
#: filters/main.cpp:56
msgid "Display list of available filter plugins and exit"
msgstr "نمایش فهرست وصله‌های پالایۀ موجود و خروج"
#: filters/main.cpp:63
msgid "testfilter"
msgstr ""
#: filters/main.cpp:64
msgid "A utility for testing KTTSD filter plugins."
msgstr "برنامه‌ای سودمند برای آزمودن وصله‌های پالایۀ KTTSD."
#: filters/main.cpp:66 kcmkttsmgr/kcmkttsmgr.cpp:1085 kttsd/main.cpp:40
#: kttsmgr/kttsmgr.cpp:63
msgid "Maintainer"
msgstr "نگه‌دارنده"
#: kcmkttsmgr/addtalker.cpp:131 kcmkttsmgr/kcmkttsmgr.cpp:552
#: libkttsd/talkercode.cpp:217
msgid "Other"
msgstr "غیره"
#: kcmkttsmgr/kcmkttsmgr.cpp:83
msgid "Text interrupted. Message."
msgstr "متن متوقف شد‌‌. پیام‌."
#: kcmkttsmgr/kcmkttsmgr.cpp:89
msgid "Resuming text."
msgstr "ازسرگیری متن‌."
#: kcmkttsmgr/kcmkttsmgr.cpp:910
msgid ""
"You have made changes to the configuration but have not saved them yet. Click "
"Apply to save the changes or Cancel to abandon the changes."
msgstr ""
" در پیکربندی تغییراتی را به وجود آورده‌اید، اما هنوز آنها را ذخیره نکرده‌اید‌‌. "
"برای ذخیرۀ تغییرات یا لغو نادیده گرفتن تغییرات، کاربرد را فشار دهید‌."
#: kcmkttsmgr/kcmkttsmgr.cpp:1072
msgid ""
"<h1>Text-to-Speech</h1>"
"<p>This is the configuration for the text-to-speech dcop service</p>"
"<p>This allows other applications to access text-to-speech resources</p>"
"<p>Be sure to configure a default language for the language you are using as "
"this will be the language used by most of the applications</p>"
msgstr ""
"<h1>متن به گفتار</h1>"
"<p>این یک پیکربندی برای خدمت،dcop متن به گفتار می‌باشد</p>"
"<p>به کاربردهای دیگر اجازۀ دستیابی به منابع متن به گفتار را می‌دهد</p>"
"<p>مطمئن شوید که یک زبان پیش‌فرض برای زبانی که استفاده می‌کنید پیکربندی‌ شده "
"باشد، چرا که ممکن است آن زبان با اغلب کاربردها استفاده شود‌. </p>"
#: kcmkttsmgr/kcmkttsmgr.cpp:1080 kttsd/main.cpp:36
#: players/artsplayer/artsplayer.cpp:240
msgid "kttsd"
msgstr ""
#: kcmkttsmgr/kcmkttsmgr.cpp:1080
msgid "KCMKttsMgr"
msgstr ""
#: kcmkttsmgr/kcmkttsmgr.cpp:1082
msgid "(c) 2002, José Pablo Ezequiel Fernández"
msgstr ""
#: kcmkttsmgr/kcmkttsmgr.cpp:1084
msgid "Author"
msgstr "نویسنده"
#: kcmkttsmgr/kcmkttsmgr.cpp:1086 kcmkttsmgr/kcmkttsmgr.cpp:1087
#: kttsd/main.cpp:41 kttsd/main.cpp:42 kttsd/main.cpp:43
#: kttsmgr/kttsmgr.cpp:64 kttsmgr/kttsmgr.cpp:65 kttsmgr/kttsmgr.cpp:66
msgid "Contributor"
msgstr "همکار"
#: filters/sbd/sbdconf.cpp:240
#: filters/stringreplacer/stringreplacerconf.cpp:425
#: kcmkttsmgr/kcmkttsmgr.cpp:1244 libkttsd/selecttalkerdlg.cpp:167
msgid "Code"
msgstr "کد"
#: kcmkttsmgr/kcmkttsmgr.cpp:1263
msgid "Select Language"
msgstr "برگزیدن زبان"
#: kcmkttsmgr/kcmkttsmgr.cpp:1436
msgid "Select Filter"
msgstr "برگزیدن پالایه"
#: kcmkttsmgr/kcmkttsmgr.cpp:1843
msgid "&Jobs"
msgstr "&کارها‌"
#: kcmkttsmgr/kcmkttsmgr.cpp:2032
msgid "Talker Configuration"
msgstr "پیکربندی گوینده"
#: kcmkttsmgr/kcmkttsmgr.cpp:2088
msgid "Filter Configuration"
msgstr "پیکربندی پالایه"
#: filters/stringreplacer/stringreplacerconf.cpp:150
#: kcmkttsmgr/kcmkttsmgr.cpp:2241
msgid "Unable to open file."
msgstr "قادر به باز کردن پرونده نیست‌."
#: filters/stringreplacer/stringreplacerconf.cpp:156
#: kcmkttsmgr/kcmkttsmgr.cpp:2247
msgid "File not in proper XML format."
msgstr "پرونده در قالب XML مناسب نیست‌."
#: filters/stringreplacer/stringreplacerconf.cpp:287
#: kcmkttsmgr/kcmkttsmgr.cpp:2291
msgid "Unable to open file "
msgstr "قادر به باز کردن پرونده نیست "
#: kcmkttsmgr/kcmkttsmgr.cpp:2375 libkttsd/talkercode.cpp:140
msgid "default"
msgstr "پیش‌فرض"
#: kcmkttsmgr/kcmkttsmgr.cpp:2481 kcmkttsmgr/kcmkttsmgr.cpp:2487
msgid "sample notification message"
msgstr " پیام اخطار نمونه"
#: kcmkttsmgr/kcmkttsmgr.cpp:2485
msgid "sample application"
msgstr "کاربرد نمونه"
#: kcmkttsmgr/kcmkttsmgr.cpp:2486
msgid "sample event"
msgstr "رویداد نمونه"
#: kcmkttsmgr/kcmkttsmgr.cpp:2527
msgid "Default (all other events)"
msgstr "پیش‌فرض )همۀ رویدادهای دیگر("
#: kcmkttsmgr/kcmkttsmgr.cpp:2536 kcmkttsmgr/selectevent.cpp:113
msgid "All other %1 events"
msgstr "همۀ رویدادهای %1 دیگر"
#: kcmkttsmgr/kcmkttsmgr.cpp:2581
msgid "Select Event"
msgstr "برگزیدن رویداد"
#: kcmkttsmgr/kcmkttsmgr.cpp:2663 kcmkttsmgr/kcmkttsmgr.cpp:2679
msgid ""
"_: file type\n"
"Notification Event List"
msgstr "فهرست رویداد اخطار"
#: filters/stringreplacer/stringreplacerconf.cpp:702
#: filters/stringreplacer/stringreplacerconf.cpp:718
#: kcmkttsmgr/kcmkttsmgr.cpp:2670 kcmkttsmgr/kcmkttsmgr.cpp:2686
msgid "Error Opening File"
msgstr "خطای باز کردن پرونده"
#: kcmkttsmgr/selectevent.cpp:68 libkttsd/notify.cpp:154
msgid "No description available"
msgstr "هیچ توصیفی موجود نیست"
#: kttsd/kttsd.cpp:133
msgid ""
"KTTS has not yet been configured. At least one Talker must be configured. "
"Would you like to configure it now?"
msgstr ""
"هنوز KTTS پیکربندی نشده است‌‌. حداقل باید یک گوینده پیکربندی شود‌‌. می‌خواهید "
"هم اکنون آن را پیکربندی کنید؟"
#: kttsd/kttsd.cpp:135
msgid "KTTS Not Configured"
msgstr "KTTS پیکربندی نشده است"
#: kttsd/kttsd.cpp:137
msgid "Do Not Configure"
msgstr "پیکربندی نشود"
#: kttsd/main.cpp:37
msgid "Text-to-speech synthesis deamon"
msgstr "شبح ترکیب‌دهی متن به گفتار"
#: kttsd/main.cpp:39 kttsmgr/kttsmgr.cpp:62
msgid "Original Author"
msgstr "نویسندۀ اصلی"
#: kttsd/main.cpp:44 kttsd/main.cpp:45 kttsmgr/kttsmgr.cpp:67
#: kttsmgr/kttsmgr.cpp:68 plugins/command/commandconf.cpp:163
#: plugins/epos/eposconf.cpp:229 plugins/festivalint/festivalintconf.cpp:577
#: plugins/flite/fliteconf.cpp:150 plugins/freetts/freettsconf.cpp:178
#: plugins/hadifix/hadifixconf.cpp:342
msgid "Testing"
msgstr "آزمودن"
#: kttsjobmgr/kttsjobmgr.cpp:85
msgid "KttsJobMgr"
msgstr ""
#: kttsjobmgr/kttsjobmgr.cpp:114
msgid "Job Num"
msgstr "شمارۀ کار"
#: kttsjobmgr/kttsjobmgr.cpp:115
msgid "Owner"
msgstr "مالک"
#: kttsjobmgr/kttsjobmgr.cpp:116
msgid "Talker ID"
msgstr "شناسۀ گوینده"
#: kttsjobmgr/kttsjobmgr.cpp:117
msgid "State"
msgstr "وضعیت"
#: kttsjobmgr/kttsjobmgr.cpp:118
msgid "Position"
msgstr "موقعیت"
#: kttsjobmgr/kttsjobmgr.cpp:119
msgid "Sentences"
msgstr "جمله‌ها"
#: kttsjobmgr/kttsjobmgr.cpp:120
msgid "Part Num"
msgstr "شمارۀ جزء"
#: kttsjobmgr/kttsjobmgr.cpp:121
msgid "Parts"
msgstr "اجزا"
#: kttsjobmgr/kttsjobmgr.cpp:127
msgid ""
"<p>These are all the text jobs. The <b>State</b> column may be:"
"<ul>"
"<li><b>Queued</b> - the job is waiting and will not be spoken until its state "
"is changed to <b>Waiting</b> by clicking the <b>Resume</b> or <b>Restart</b> "
"buttons.</li>"
"<li><b>Waiting</b> - the job is ready to be spoken. It will be spoken when the "
"jobs preceding it in the list have finished.</li>"
"<li><b>Speaking</b> - the job is speaking. The <b>Position</b> "
"column shows the current sentence of the job being spoken. You may pause a "
"speaking job by clicking the <b>Hold</b> button.</li>"
"<li><b>Paused</b> - the job is currently paused. Paused jobs prevent jobs "
"below them from speaking. Use the <b>Resume</b> or <b>Restart</b> "
"buttons to resume speaking the job, or click <b>Later</b> "
"to move the job down in the list.</li>"
"<li><b>Finished</b> - the job has finished speaking. When a second job "
"finishes, this one will be deleted. You may click <b>Restart</b> "
"to repeat the job.</li></ul><em>Note</em>: Messages, Warnings, and Screen "
"Reader Output do not appear in this list. See the Handbook for more "
"information.</p>"
msgstr ""
"<p>اینها همۀ کارهای متن هستند‌‌. ممکن است ستون <b>وضعیت</b> این گونه باشد: "
"<ul>"
"<li><b>صف‌شده</b> - کار در انتظار است و تا زمانی که وضعیت آن به حالت <b>"
"انتظار</b> تغییر نکند گفته نمی‌شود‌‌. این تغییر با فشار دکمه‌های زیر امکان‌پذیر "
"است: <b>ازسرگیری</b> یا <b>بازآغازی </b> </li>"
"<li><b>انتظار</b> - کار آمادۀ گفته شدن است‌‌. زمانی گفته می‌شود که عملیات تقدم "
"آن در فهرست به پایان رسیده باشد‌. </li>"
"<li><b>گفتن</b> - کار در حال گفتن است‌‌. ستون <b>موقعیت</b>"
"نشان‌دهندۀ جملۀ جاری کاری است که گفته می‌شود‌‌. ممکن است یک کار در حال گفتن را "
"با فشار دکمۀ <b>نگه داشتن</b> نگه دارید‌‌. </li>"
"<li><b>مکث</b> - کار در حال حاضر مکث کرده است، کارهای مکث‌شده از گفته شدن "
"کارهای زیر جلوگیری می‌کنند‌‌. کلیدهای <b>ازسرگیری </b> یا<b>آغاز مجدد</b> "
"را به کار برید تا گفته شدن کار از سرگرفته شود، یا<b>بعد</b> "
"را فشار دهید تا کار به پایین فهرست برود‌. </li>"
"<li><b>پایان یافته</b> - گفتن کار پایان یافته است‌‌. زمانی که کار دوم به پایان "
"رسید، این یکی حذف می‌شود‌‌. ممکن است <b>بازآغازی</b> "
"را فشار دهید تا کار تکرار شود‌. </li></ul><em>یادداشت</em>"
": پیامها، اخطارها، و خروجی خوانندۀ پرونده در این فهرست نشان داده نمی‌شوند‌‌. "
"برای اطلاعات بیشتر به کتاب مرجع رجوع کنید‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:176
msgid "Hold"
msgstr "نگه داشتن"
#: kttsjobmgr/kttsjobmgr.cpp:178
msgid ""
"<p>Changes a job to Paused state. If currently speaking, the job stops "
"speaking. Paused jobs prevent jobs that follow them from speaking, so either "
"click <b>Resume</b> to make the job speakable, or click <b>Later</b> "
"to move it down in the list.</p>"
msgstr ""
"<p>یک کار را به وضعیت مکث تغییر می‌دهد‌‌. اگر در حال گفتن است، کار گفتن را "
"متوقف می‌کند‌‌. کارهای متوقف‌شده از گفته شدن کارهایی که به دنبال آنها می‌آیند، "
"جلوگیری می‌کنند‌‌. پس یا <b> ازسرگیری </b> را فشار دهید تا کار قابل گفتن شود یا "
"<b>بعد</b>را فشار دهید تا به پایین فهرست برود‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:185 kttsmgr/kttsmgr.cpp:186
msgid "Resume"
msgstr "ازسرگیری"
#: kttsjobmgr/kttsjobmgr.cpp:187
msgid ""
"<p>Resumes a paused job or changes a Queued job to Waiting. If the job is the "
"top speakable job in the list, it begins speaking.</p>"
msgstr ""
"<p> کار متوقف‌شده‌ای را از سر می‌گیرد، یا یک کار صف‌شده را در انتظار "
"می‌گذارد‌‌. اگر کار در بالای فهرست کار قابل گفتن باشد، شروع به گفتن می‌کند‌. "
"</p>"
#: kttsjobmgr/kttsjobmgr.cpp:192
msgid "R&estart"
msgstr "&بازآغازی‌"
#: kttsjobmgr/kttsjobmgr.cpp:194
msgid ""
"<p>Rewinds a job to the beginning and changes its state to Waiting. If the job "
"is the top speakable job in the list, it begins speaking.</p>"
msgstr ""
"<p>کار را به ابتدا بازپیچی می‌کند، و آن را به وضعیت انتظار تغییر می‌دهد‌‌. اگر "
"کار در بالای فهرست کار قابل گفتن باشد، شروع به گفتن می‌کند‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:201
msgid ""
"<p>Deletes the job. If it is currently speaking, it stops speaking. The next "
"speakable job in the list begins speaking.</p>"
msgstr ""
"<p>کار را حذف می‌کند‌‌. اگر در حال گفتن است، گفتن را متوقف می‌کند‌‌. در فهرست "
"کار قابل گفتن، گفتن بعدی را آغاز می‌کند‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:206
msgid "&Later"
msgstr "&بعد‌"
#: kttsjobmgr/kttsjobmgr.cpp:208
msgid ""
"<p>Moves a job downward in the list so that it will be spoken later. If the "
"job is currently speaking, its state changes to Paused.</p>"
msgstr ""
"<p>در فهرست کار را به پایین حرکت می‌دهد تا بعداً گفته شود‌‌. اگر کار در حال "
"گفته شدن است، وضعیت آن به حالت مکث تغییر می‌کند‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:214
msgid "Pre&vious Part"
msgstr "جزء &قبلی‌"
#: kttsjobmgr/kttsjobmgr.cpp:216
msgid "<p>Rewinds a multi-part job to the previous part.</p>"
msgstr "<p>کاری چند جزئی را به جزء قبل باز می‌پیچاند‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:220
msgid "&Previous Sentence"
msgstr "جملۀ &قبلی‌"
#: kttsjobmgr/kttsjobmgr.cpp:222
msgid "<p>Rewinds a job to the previous sentence.</p>"
msgstr "<p>کار را به جملۀ قبل باز می‌پیچاند‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:226
msgid "&Next Sentence"
msgstr "جملۀ &بعد‌"
#: kttsjobmgr/kttsjobmgr.cpp:228
msgid "<p>Advances a job to the next sentence.</p>"
msgstr "<p>کار را به جملۀ بعد پیش می‌برد‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:232
msgid "Ne&xt Part"
msgstr "جزء &بعد‌"
#: kttsjobmgr/kttsjobmgr.cpp:234
msgid "<p>Advances a multi-part job to the next part.</p>"
msgstr "<p>کار چند جزئی را به جزء بعد پیش می‌برد‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:239
msgid "&Speak Clipboard"
msgstr "&گفتن تخته یادداشت‌"
#: kttsjobmgr/kttsjobmgr.cpp:241
msgid ""
"<p>Queues the current contents of the clipboard for speaking and sets its state "
"to Waiting. If the job is the topmost in the list, it begins speaking. The "
"job will be spoken by the topmost Talker in the <b>Talkers</b> tab.</p>"
msgstr ""
"<p>محتوای جاری تخته یادداشت را صف می‌کند تا گفته شوند، و وضعیت آن را به صورت "
"انتظار تنظیم می‌کند‌‌. اگر کار در فهرست بالاترین است، گفتن را آغاز می‌کند‌‌. "
"کار با بالاترین گوینده در تب<b>گویندگان</b> گفته می‌شود‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:247
msgid "Spea&k File"
msgstr "پروندۀ &گفتن‌"
#: kttsjobmgr/kttsjobmgr.cpp:249
msgid ""
"<p>Prompts you for a file name and queues the contents of the file for "
"speaking. You must click the <b>Resume</b> button before the job will be "
"speakable. The job will be spoken by the topmost Talker in the <b>Talkers</b> "
"tab.</p>"
msgstr ""
"<p>نام پرونده را به شما اعلان، و محتوای پرونده را برای گفتن به صف می‌کند‌‌. "
"باید پیش از این که کار قابل گفتن شود، دکمۀ <b>ازسرگیری</b>"
"را فشار دهید‌‌. کار به وسیلۀ بالاترین گوینده در تب <b>گویندگان</b> "
"گفته می‌شود‌‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:255
msgid "Change Talker"
msgstr "تغییر گوینده"
#: kttsjobmgr/kttsjobmgr.cpp:257
msgid ""
"<p>Prompts you with a list of your configured Talkers from the <b>Talkers</b> "
"tab. The job will be spoken using the selected Talker.</p>"
msgstr ""
"<p>توسط فهرستی از گویندگان پیکربندی‌شده از تب<b>گویندگان</b>"
"به شما اعلان می‌کند‌‌. کار با استفاده از گویندۀ برگزیده گفته می‌شود‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:262
msgid "&Refresh"
msgstr "&بازآوری‌"
#: kttsjobmgr/kttsjobmgr.cpp:264
msgid "<p>Refresh the list of jobs.</p>"
msgstr "<p>بازآوری فهرست کارها‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:278
msgid "Current Sentence"
msgstr "جملۀ جاری"
#: kttsjobmgr/kttsjobmgr.cpp:288
msgid "<p>The text of the sentence currently speaking.</p>"
msgstr "<p>متن جمله‌ای که گفته می‌شود‌. </p>"
#: kttsjobmgr/kttsjobmgr.cpp:585 kttsmgr/kttsmgr.cpp:251
msgid "Queued"
msgstr "صف‌شده"
#: kttsjobmgr/kttsjobmgr.cpp:586 kttsmgr/kttsmgr.cpp:252
msgid "Waiting"
msgstr "انتظار"
#: kttsjobmgr/kttsjobmgr.cpp:587 kttsmgr/kttsmgr.cpp:253
msgid "Speaking"
msgstr "گفتن"
#: kttsjobmgr/kttsjobmgr.cpp:588 kttsmgr/kttsmgr.cpp:254
msgid "Paused"
msgstr "مکث‌شده"
#: kttsjobmgr/kttsjobmgr.cpp:589 kttsmgr/kttsmgr.cpp:255
msgid "Finished"
msgstr "تمام‌شده"
#: kttsjobmgr/kttsjobmgr.cpp:590 kttsmgr/kttsmgr.cpp:256
#: plugins/festivalint/festivalintconf.cpp:314
#: plugins/festivalint/festivalintconf.cpp:519
msgid "Unknown"
msgstr "ناشناخته"
#: kttsmgr/kttsmgr.cpp:49
msgid "Start minimized in system tray"
msgstr "آغاز کمینه‌سازی در سینی سیستم"
#: kttsmgr/kttsmgr.cpp:51
msgid "Exit when speaking is finished and minimized in system tray"
msgstr "زمانی که گفتن به اتمام رسید و در سینی سیستم کمینه شد، خارج شوید"
#: kttsmgr/kttsmgr.cpp:59
msgid "KTTSMgr"
msgstr ""
#: kttsmgr/kttsmgr.cpp:60
msgid "Text-to-Speech Manager"
msgstr "مدیر متن به گفتار"
#: kttsmgr/kttsmgr.cpp:89
msgid "TDE Text-to-Speech Manager"
msgstr "مدیر متن به گفتار TDE"
#: kttsmgr/kttsmgr.cpp:156
msgid "<qt>Text-to-Speech Manager"
msgstr "<qt>مدیر متن به گفتار"
#: kttsmgr/kttsmgr.cpp:182
msgid "&Speak Clipboard Contents"
msgstr "&گفتن محتویات تخته یادداشت‌"
#: kttsmgr/kttsmgr.cpp:184
msgid "&Hold"
msgstr "&نگه داشتن‌"
#: kttsmgr/kttsmgr.cpp:189
msgid "KTTS &Handbook"
msgstr "&کتاب مرجع KTTS"
#: kttsmgr/kttsmgr.cpp:191
msgid "&About KTTSMgr"
msgstr "&دربارۀ KTTSMgr"
#: kttsmgr/kttsmgr.cpp:262
msgid "Text-to-Speech System is not running"
msgstr "سیستم متن به گفتار اجرا نمی‌شود"
#: kttsmgr/kttsmgr.cpp:264
#, c-format
msgid ""
"_n: 1 job\n"
"%n jobs"
msgstr "%n کار"
#: kttsmgr/kttsmgr.cpp:275
msgid ", current job %1 at sentence %2 of %3 sentences"
msgstr "، کار جاری %1 در جملۀ %2 از %3 جمله‌"
#: libkttsd/notify.cpp:49
msgid "Speak event name"
msgstr "گفتن نام رویداد"
#: libkttsd/notify.cpp:50
msgid "Speak the notification message"
msgstr "گفتن پیام اخطار"
#: libkttsd/notify.cpp:51
msgid "Do not speak the notification"
msgstr "اخطار گفته نشود"
#: libkttsd/notify.cpp:52
msgid "Speak custom text:"
msgstr "گفتن متن سفارشی:"
#: libkttsd/notify.cpp:106
msgid "none"
msgstr "هیچ‌کدام"
#: libkttsd/notify.cpp:107
msgid "notification dialogs"
msgstr "محاوره‌های اخطار"
#: libkttsd/notify.cpp:108
msgid "passive popups"
msgstr "بالاپرهای منفعل"
#: libkttsd/notify.cpp:109
msgid "notification dialogs and passive popups"
msgstr "محاوره‌های اخطار و بالاپرهای منفعل"
#: libkttsd/notify.cpp:110
msgid "all notifications"
msgstr "همۀ اخطارها"
#: libkttsd/pluginproc.cpp:184
msgid "Local"
msgstr "محلی"
#: libkttsd/pluginproc.cpp:188
msgid "Latin1"
msgstr "لاتین۱"
#: libkttsd/pluginproc.cpp:189
msgid "Unicode"
msgstr "یونی‌کد"
#: filters/sbd/sbdconf.cpp:268
#: filters/stringreplacer/stringreplacerconf.cpp:453
#: libkttsd/selecttalkerdlg.cpp:190
msgid "Select Languages"
msgstr "برگزیدن زبانها"
#: libkttsd/talkercode.cpp:227
msgid ""
"_: full country name\n"
"United States of America"
msgstr "ایالات متحدۀ آمریکا"
#: libkttsd/talkercode.cpp:228
msgid ""
"_: abbreviated country name\n"
"USA"
msgstr "ایالات متحدۀ آمریکا"
#: libkttsd/talkercode.cpp:229
msgid ""
"_: full country name\n"
"United Kingdom"
msgstr "انگلستان"
#: libkttsd/talkercode.cpp:230
msgid ""
"_: abbreviated country name\n"
"UK"
msgstr "انگلستان"
#: libkttsd/talkercode.cpp:242 libkttsd/talkercode.cpp:251
msgid "male"
msgstr "مذکر"
#: libkttsd/talkercode.cpp:244 libkttsd/talkercode.cpp:253
msgid "female"
msgstr "مؤنث"
#: libkttsd/talkercode.cpp:246 libkttsd/talkercode.cpp:255
msgid ""
"_: neutral gender\n"
"neutral"
msgstr "خنثی"
#: libkttsd/talkercode.cpp:262 libkttsd/talkercode.cpp:271
msgid ""
"_: medium sound\n"
"medium"
msgstr "متوسط"
#: libkttsd/talkercode.cpp:264 libkttsd/talkercode.cpp:273
msgid ""
"_: loud sound\n"
"loud"
msgstr "بلند"
#: libkttsd/talkercode.cpp:266 libkttsd/talkercode.cpp:275
msgid ""
"_: soft sound\n"
"soft"
msgstr "ملایم"
#: libkttsd/talkercode.cpp:282 libkttsd/talkercode.cpp:291
msgid ""
"_: medium speed\n"
"medium"
msgstr "متوسط"
#: libkttsd/talkercode.cpp:284 libkttsd/talkercode.cpp:293
msgid ""
"_: fast speed\n"
"fast"
msgstr "تند"
#: libkttsd/talkercode.cpp:286 libkttsd/talkercode.cpp:295
msgid ""
"_: slow speed\n"
"slow"
msgstr "کند"
#: app-plugins/kate/katekttsd.cpp:77
msgid "Speak Text"
msgstr "گفتن متن"
#: app-plugins/kate/katekttsd.cpp:100
msgid "Starting KTTSD Failed"
msgstr "خرابی در آغاز KTTSD"
#: app-plugins/kate/katekttsd.cpp:110 app-plugins/kate/katekttsd.cpp:117
msgid "DCOP Call Failed"
msgstr "خرابی فراخوانی DCOP"
#: app-plugins/kate/katekttsd.cpp:111
msgid "The DCOP call setText failed."
msgstr "خرابی setText فراخوانی DCOP."
#: app-plugins/kate/katekttsd.cpp:118
msgid "The DCOP call startText failed."
msgstr "خرابی startText فراخوانی DCOP."
#: filters/sbd/sbdproc.cpp:422
msgid "Invalid S S M L."
msgstr "S S M L نامعتبر‌."
#: filters/stringreplacer/stringreplacerconf.cpp:238
#: filters/stringreplacer/stringreplacerconf.cpp:574
#: filters/stringreplacer/stringreplacerconf.cpp:609
msgid ""
"_: Abbreviation for 'Regular Expression'\n"
"RegExp"
msgstr "عبارت منظم"
#: filters/stringreplacer/stringreplacerconf.cpp:238
#: filters/stringreplacer/stringreplacerconf.cpp:333
#: filters/stringreplacer/stringreplacerconf.cpp:607
msgid "Word"
msgstr "واژه"
#: filters/stringreplacer/stringreplacerconf.cpp:378
#: filters/stringreplacer/stringreplacerconf.cpp:413
msgid "String Replacer"
msgstr "جایگزین‌کنندۀ رشته"
#: filters/stringreplacer/stringreplacerconf.cpp:411
#: filters/stringreplacer/stringreplacerconf.cpp:488
#: filters/stringreplacer/stringreplacerconf.cpp:492
msgid "Multiple Languages"
msgstr "زبانهای چندگانه"
#: filters/stringreplacer/stringreplacerconf.cpp:595
msgid "Edit String Replacement"
msgstr "ویرایش جایگزینی رشته"
#: filters/talkerchooser/talkerchooserconf.cpp:164
msgid "Talker Chooser"
msgstr "انتخاب‌کنندۀ گوینده"
#: filters/xmltransformer/xmltransformerconf.cpp:141
msgid "XML Transformer"
msgstr "تبدیل‌کنندۀ XML"
#: players/artsplayer/artsplayer.cpp:79
msgid "Cannot find the aRts soundserver."
msgstr " کارساز صدای aRts را نمی‌توان یافت‌."
#: players/artsplayer/artsplayer.cpp:235
msgid ""
"Connecting/starting aRts soundserver failed. Make sure that artsd is configured "
"properly."
msgstr ""
" اتصال/آغاز کارساز صوت aRts خراب شد‌‌. مطمئن شوید که artsd درست پیکربندی شده "
"باشد‌."
#: plugins/command/commandconf.cpp:164 plugins/epos/eposconf.cpp:230
#: plugins/flite/fliteconf.cpp:151 plugins/freetts/freettsconf.cpp:179
#: plugins/hadifix/hadifixconf.cpp:343
msgid "Testing."
msgstr "آزمون‌."
#: plugins/festivalint/festivalintconf.cpp:406
msgid "Scanning... Please wait."
msgstr "پویش‌... لطفاً، منتظر بمانید‌."
#: plugins/festivalint/festivalintconf.cpp:421
msgid "Query Voices"
msgstr "پرس‌و‌جوی صداها"
#: plugins/festivalint/festivalintconf.cpp:422
msgid ""
"Querying Festival for available voices. This could take up to 15 seconds."
msgstr ""
"پرس‌وجوی Festival برای صداهای موجود‌‌. می‌تواند تا ۱۵ ثانیه طول بکشد‌‌."
#: plugins/festivalint/festivalintconf.cpp:578
msgid ""
"Testing. MultiSyn voices require several seconds to load. Please be patient."
msgstr ""
"آزمون‌‌. برای بارگذاری صداهای ترکیبی چند ثانیه نیاز است‌‌. لطفاً، صبر کنید‌‌."
#: plugins/freetts/freettsconf.cpp:96
msgid ""
"Unable to locate freetts.jar in your path.\n"
"Please specify the path to freetts.jar in the Properties tab before using TDE "
"Text-to-Speech"
msgstr ""
"قادر به محل‌یابی freetts. jar در مسیرتان نیست‌. \n"
"لطفاً، پیش از استفاده از متن به گفتار TDE مسیر freetts. jar را در تب ویژگیها "
"مشخص کنید‌‌."
#: plugins/freetts/freettsconf.cpp:96
msgid "TDE Text-to-Speech"
msgstr "متن به گفتار TDE"
#: plugins/hadifix/hadifixconf.cpp:95
msgid "Male voice \"%1\""
msgstr "صدای مذکر »%1«"
#: plugins/hadifix/hadifixconf.cpp:97 plugins/hadifix/hadifixconf.cpp:100
msgid "Female voice \"%1\""
msgstr "صدای مؤنث »%1«"
#: plugins/hadifix/hadifixconf.cpp:102 plugins/hadifix/hadifixconf.cpp:103
msgid "Unknown voice \"%1\""
msgstr "صدای ناشناختۀ »%1«"
#: plugins/hadifix/hadifixconf.cpp:216
msgid "This plugin is distributed under the terms of the GPL v2 or later."
msgstr "این وصله تحت اصطلاحات نسخۀ ۲ GPL یا بعد توزیع می‌شود."
#: plugins/hadifix/hadifixconf.cpp:300
msgid "Voice File - Hadifix Plugin"
msgstr "پروندۀ صدا - وصلۀ Hadifix"
#: plugins/hadifix/voicefileui.ui.h:27
msgid "The gender of the voice file %1 could not be detected."
msgstr "در پروندۀ صدای %1 نمی‌توان جنسیت را آشکار کرد."
#: plugins/hadifix/voicefileui.ui.h:28 plugins/hadifix/voicefileui.ui.h:33
msgid "Trying to Determine the Gender - Hadifix Plug In"
msgstr "سعی در تعیین جنسیت - وصلۀ Hadifix"
#: plugins/hadifix/voicefileui.ui.h:32
msgid "The file %1 does not seem to be a voice file."
msgstr "به نظر نمی‌رسد که پروندۀ %1 یک پروندۀ صوتی باشد."
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "مریم سادات رضوی"
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "razavi@itland.ir"