You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-nn/install-sh

395 lines
10 KiB

#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-11-07.23
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
posix_glob=
posix_mkdir=
# Symbolic mode for testing mkdir with directories.
# It is the same as 755, but also tests that "u+" works.
test_mode=u=rwx,g=rx,o=rx,u+wx
# Desired mode of installed file.
mode=0755
# Desired mode of newly created intermediate directories.
# It is empty if not known yet.
intermediate_mode=
chmodcmd=$chmodprog
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| \
. : '\(.\)' 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
/^X\(\/\/\)[^/].*/{ s//\1/; q; }
/^X\(\/\/\)$/{ s//\1/; q; }
/^X\(\/\).*/{ s//\1/; q; }
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
posix_mkdir=false
if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then
posix_mkdir=true
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null
fi ;;
esac
if
$posix_mkdir && {
# With -d, create the new directory with the user-specified mode.
# Otherwise, create it using the same intermediate mode that
# mkdir -p would use when creating intermediate directories.
# POSIX says that this mode is "$(umask -S),u+wx", so use that
# if umask -S works.
if test -n "$dir_arg"; then
mkdir_mode=$mode
else
case $intermediate_mode in
'')
if umask_S=`(umask -S) 2>/dev/null`; then
intermediate_mode=$umask_S,u+wx
else
intermediate_mode=$test_mode
fi ;;
esac
mkdir_mode=$intermediate_mode
fi
$mkdirprog -m "$mkdir_mode" -p -- "$dstdir"
}
then :
else
# mkdir does not conform to POSIX, or it failed possibly due to
# a race condition. Create the directory the slow way, step by
# step, checking for races as we go.
case $dstdir in
/*) pathcomp=/ ;;
-*) pathcomp=./ ;;
*) pathcomp= ;;
esac
case $posix_glob in
'')
if (set -f) 2>/dev/null; then
posix_glob=true
else
posix_glob=false
fi ;;
esac
oIFS=$IFS
IFS=/
$posix_glob && set -f
set fnord $dstdir
shift
$posix_glob && set +f
IFS=$oIFS
for d
do
test "x$d" = x && continue
pathcomp=$pathcomp$d
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# Don't fail if two instances are running concurrently.
test -d "$pathcomp" || exit 1
fi
pathcomp=$pathcomp/
done
obsolete_mkdir_used=true
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dst"; then
$doit $rmcmd -f "$dst" 2>/dev/null \
|| { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
&& { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
|| {
echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
} || exit 1
trap '' 0
fi
done