You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
tde-i18n/tde-i18n-br/messages/tdeadmin/kcmlilo.po

570 lines
17 KiB

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

# KDE breton translation
# Thierry Vignaud <tvignaud@mandriva.com>, 2004-2005
msgid ""
msgstr ""
"Project-Id-Version: tdeadmin/kcmlilo.pot\n"
"POT-Creation-Date: 2007-03-13 02:18+0100\n"
"PO-Revision-Date: 2004-09-21 14:49+0200\n"
"Last-Translator: Thierry Vignaud <tvignaud@mandriva.com>\n"
"Language-Team: br <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: kde-qt-common/EditWidget.cpp:43
msgid "Select..."
msgstr "Dibabit ..."
#: kde-qt-common/expert.cpp:41
msgid ""
"You can edit the lilo.conf file directly here. All changes you make here are "
"automatically transferred to the graphical interface."
msgstr ""
#: kde-qt-common/general.cpp:45
msgid "Install &boot record to drive/partition:"
msgstr ""
#: kde-qt-common/general.cpp:55
msgid ""
"Select the drive or partition you want to install the LILO boot loader to here. "
"Unless you intend to use other boot managers in addition to LILO, this should "
"be the MBR (master boot record) of your boot drive."
"<br>In this case, you should probably select <i>/dev/hda</i> "
"if your boot drive is an IDE drive or <i>/dev/sda</i> "
"if your boot drive is SCSI."
msgstr ""
#: kde-qt-common/general.cpp:58
msgid "Boot the default kernel/OS &after:"
msgstr "Skeudenn ar galon/RK dre ziouer &goude :"
#: kde-qt-common/general.cpp:60
msgid "/10 seconds"
msgstr "/10 eilenn"
#: kde-qt-common/general.cpp:64
msgid ""
"LILO will wait the amount of time specified here before booting the kernel (or "
"OS) marked as <i>default</i> in the <b>Images</b> tab."
msgstr ""
#: kde-qt-common/general.cpp:67
msgid "Use &linear mode"
msgstr ""
#: kde-qt-common/general.cpp:69
msgid ""
"Check this box if you want to use the linear mode."
"<br>Linear mode tells the boot loader the location of kernels in linear "
"addressing rather than sector/head/cylinder."
"<br>linear mode is required for some SCSI drives, and shouldn't hurt unless "
"you're planning to create a boot disk to be used with a different computer."
"<br>See the lilo.conf man page for details."
msgstr ""
#: kde-qt-common/general.cpp:70
msgid "Use &compact mode"
msgstr ""
#: kde-qt-common/general.cpp:72
msgid ""
"Check this box if you want to use the compact mode."
"<br>The compact mode tries to merge read requests for adjacent sectors into a "
"single read request. This reduces load time and keeps the boot map smaller, but "
"will not work on all systems."
msgstr ""
#: kde-qt-common/general.cpp:76 kde/Details.cpp:82 qt/Details.cpp:85
msgid "&Record boot command lines for defaults"
msgstr ""
#: kde-qt-common/general.cpp:78
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"defaults for the following boots. This way, lilo \"locks\" on a choice until it "
"is manually overridden.\n"
"This sets the <b>lock</b> option in lilo.conf."
msgstr ""
#: kde-qt-common/general.cpp:79 kde/Details.cpp:84 qt/Details.cpp:87
msgid "R&estrict parameters"
msgstr ""
#: kde-qt-common/general.cpp:82
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
"linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf."
"<br>This sets a default for all Linux kernels you want to boot. If you need a "
"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
"Details</i>."
msgstr ""
#: kde-qt-common/general.cpp:86 kde/Details.cpp:89 qt/Details.cpp:93
msgid "Require &password:"
msgstr ""
#: kde-qt-common/general.cpp:93
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here."
"<br>This sets a default for all Linux kernels you want to boot. If you need a "
"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
"Details</i>."
msgstr ""
#: kde-qt-common/general.cpp:97
msgid "&Default graphics mode on text console:"
msgstr ""
#: kde-qt-common/general.cpp:100
msgid ""
"You can select the default graphics mode here."
"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
"boot time."
"<br>This sets a default for all Linux kernels you want to boot. If you need a "
"per-kernel setting, go to the <i>Operating systems</i> tab and select <i>"
"Details</i>."
msgstr ""
#: kde-qt-common/general.cpp:101 kde/Details.cpp:48 qt/Details.cpp:48
msgid "default"
msgstr "dre ziouer"
#: kde-qt-common/general.cpp:102 kde/Details.cpp:49 qt/Details.cpp:49
msgid "ask"
msgstr "goulenn"
#: kde-qt-common/general.cpp:103 kde/Details.cpp:50 qt/Details.cpp:50
msgid "text 80x25 (0)"
msgstr "skrid 80x25 (0)"
#: kde-qt-common/general.cpp:104 kde/Details.cpp:51 qt/Details.cpp:51
msgid "text 80x50 (1)"
msgstr "skrid 80x50 (1)"
#: kde-qt-common/general.cpp:105 kde/Details.cpp:52 qt/Details.cpp:52
msgid "text 80x43 (2)"
msgstr "skrid 80x43 (2)"
#: kde-qt-common/general.cpp:106 kde/Details.cpp:53 qt/Details.cpp:53
msgid "text 80x28 (3)"
msgstr "skrid 80x28 (3)"
#: kde-qt-common/general.cpp:107 kde/Details.cpp:54 qt/Details.cpp:54
msgid "text 80x30 (4)"
msgstr "skrid 80x30 (4)"
#: kde-qt-common/general.cpp:108 kde/Details.cpp:55 qt/Details.cpp:55
msgid "text 80x34 (5)"
msgstr "skrid 80x34 (5)"
#: kde-qt-common/general.cpp:109 kde/Details.cpp:56 qt/Details.cpp:56
msgid "text 80x60 (6)"
msgstr "skrid 80x60 (6)"
#: kde-qt-common/general.cpp:110 kde/Details.cpp:57 qt/Details.cpp:57
msgid "text 40x25 (7)"
msgstr "skrid 40x25 (7)"
#: kde-qt-common/general.cpp:111 kde/Details.cpp:58 qt/Details.cpp:58
msgid "VGA 640x480, 256 colors (769)"
msgstr "VGA 640x480, 256 liv (769)"
#: kde-qt-common/general.cpp:112 kde/Details.cpp:59 qt/Details.cpp:59
msgid "VGA 640x480, 32767 colors (784)"
msgstr "VGA 640x480, 32767 liv (784)"
#: kde-qt-common/general.cpp:113 kde/Details.cpp:60 qt/Details.cpp:60
msgid "VGA 640x480, 65536 colors (785)"
msgstr "VGA 640x480, 65536 liv (785)"
#: kde-qt-common/general.cpp:114 kde/Details.cpp:61 qt/Details.cpp:61
msgid "VGA 640x480, 16.7M colors (786)"
msgstr "VGA 640x480, 16.7M liv (786)"
#: kde-qt-common/general.cpp:115 kde/Details.cpp:62 qt/Details.cpp:62
msgid "VGA 800x600, 256 colors (771)"
msgstr "VGA 800x600, 256 liv (771)"
#: kde-qt-common/general.cpp:116 kde/Details.cpp:63 qt/Details.cpp:63
msgid "VGA 800x600, 32767 colors (787)"
msgstr "VGA 800x600, 32767 liv (787)"
#: kde-qt-common/general.cpp:117 kde/Details.cpp:64 qt/Details.cpp:64
msgid "VGA 800x600, 65536 colors (788)"
msgstr "VGA 800x600, 65536 liv (788)"
#: kde-qt-common/general.cpp:118 kde/Details.cpp:65 qt/Details.cpp:65
msgid "VGA 800x600, 16.7M colors (789)"
msgstr "VGA 800x600, 16.7M liv (789)"
#: kde-qt-common/general.cpp:119 kde/Details.cpp:66 qt/Details.cpp:66
msgid "VGA 1024x768, 256 colors (773)"
msgstr "VGA 1024x768, 256 liv (773)"
#: kde-qt-common/general.cpp:120 kde/Details.cpp:67 qt/Details.cpp:67
msgid "VGA 1024x768, 32767 colors (790)"
msgstr "VGA 1024x768, 32767 liv (790)"
#: kde-qt-common/general.cpp:121 kde/Details.cpp:68 qt/Details.cpp:68
msgid "VGA 1024x768, 65536 colors (791)"
msgstr "VGA 1024x768, 65536 liv (791)"
#: kde-qt-common/general.cpp:122 kde/Details.cpp:69 qt/Details.cpp:69
msgid "VGA 1024x768, 16.7M colors (792)"
msgstr "VGA 1024x768, 16.7M liv (792)"
#: kde-qt-common/general.cpp:123 kde/Details.cpp:70 qt/Details.cpp:70
msgid "VGA 1280x1024, 256 colors (775)"
msgstr "VGA 1280x1024, 256 liv (775)"
#: kde-qt-common/general.cpp:124 kde/Details.cpp:71 qt/Details.cpp:71
msgid "VGA 1280x1024, 32767 colors (793)"
msgstr "VGA 1280x1024, 32767 liv (793)"
#: kde-qt-common/general.cpp:125 kde/Details.cpp:72 qt/Details.cpp:72
msgid "VGA 1280x1024, 65536 colors (794)"
msgstr "VGA 1280x1024, 65536 liv (794)"
#: kde-qt-common/general.cpp:126 kde/Details.cpp:73 qt/Details.cpp:73
msgid "VGA 1280x1024, 16.7M colors (795)"
msgstr "VGA 1280x1024, 16.7M liv (795)"
#: kde-qt-common/general.cpp:130
msgid "Enter LILO &prompt automatically"
msgstr ""
#: kde-qt-common/general.cpp:131
msgid ""
"If this box is checked, LILO goes to the LILO prompt whether or not a key is "
"pressed. If it is turned off, LILO boots the default operating system unless "
"shift is pressed (in that case, it goes to the LILO prompt)."
"<br>This sets the <i>prompt</i> option in lilo.conf."
msgstr ""
#: kde-qt-common/images.cpp:53
msgid ""
"This is the list of kernels and operating systems you can currently boot. "
"Select which one you want to edit here."
msgstr ""
#: kde-qt-common/images.cpp:59 kde-qt-common/images.cpp:281
msgid "&Kernel:"
msgstr "&Kalon :"
#: kde-qt-common/images.cpp:60 kde-qt-common/images.cpp:187
msgid "Enter the filename of the kernel you want to boot here."
msgstr "Roit anv restr ar galon e fell deoc'h loc'hañ amañ."
#: kde-qt-common/images.cpp:62 kde-qt-common/images.cpp:188
#: kde-qt-common/images.cpp:216
msgid "&Label:"
msgstr "&Skridennad :"
#: kde-qt-common/images.cpp:63 kde-qt-common/images.cpp:188
msgid "Enter the label (name) of the kernel you want to boot here."
msgstr ""
#: kde-qt-common/images.cpp:65 kde-qt-common/images.cpp:189
msgid "&Root filesystem:"
msgstr "Reizhiad restroù &gwrizienn :"
#: kde-qt-common/images.cpp:66 kde-qt-common/images.cpp:189
msgid ""
"Enter the root filesystem (i.e. the partition that will be mounted as / at boot "
"time) for the kernel you want to boot here."
msgstr ""
#: kde-qt-common/images.cpp:68 kde-qt-common/images.cpp:190
msgid "&Initial ramdisk:"
msgstr "PladennMemor &gentañ :"
#: kde-qt-common/images.cpp:69 kde-qt-common/images.cpp:190
msgid ""
"If you want to use an initial ramdisk (initrd) for this kernel, enter its "
"filename here. Leave this field blank if you don't intend to use an initial "
"ramdisk for this kernel."
msgstr ""
#: kde-qt-common/images.cpp:71
msgid "E&xtra parameters:"
msgstr "Dibarzhoù ou&zhpenn :"
#: kde-qt-common/images.cpp:72
msgid ""
"Enter any extra parameters you wish to pass to the kernel here. Usually, this "
"can be left blank."
"<br>This sets the <i>append</i> option in lilo.conf."
msgstr ""
#: kde-qt-common/images.cpp:79
msgid "Set &Default"
msgstr "Lakaat an hini &dre ziouer"
#: kde-qt-common/images.cpp:80
msgid "Boot this kernel/OS if the user doesn't make a different choice"
msgstr ""
#: kde-qt-common/images.cpp:82
msgid "De&tails"
msgstr "&Munudoù"
#: kde-qt-common/images.cpp:83
msgid ""
"This button brings up a dialog box with further, less commonly used, options."
msgstr ""
#: kde-qt-common/images.cpp:85
msgid "&Probe"
msgstr ""
#: kde-qt-common/images.cpp:87
msgid ""
"Automatically generate a (hopefully) reasonable lilo.conf for your system"
msgstr ""
#: kde-qt-common/images.cpp:88
msgid "&Check Configuration"
msgstr "&Gwiriekaat ar gefluniadur"
#: kde-qt-common/images.cpp:90
msgid "Run LILO in test mode to see if the configuration is ok"
msgstr ""
#: kde-qt-common/images.cpp:91
msgid "Add &Kernel..."
msgstr "Ouzhpennañ ur &galon ..."
#: kde-qt-common/images.cpp:93
msgid "Add a new Linux kernel to the boot menu"
msgstr "Ouzhpennañ ur galon Linux nevez d'ar meuziad loc'hañ"
#: kde-qt-common/images.cpp:94
msgid "Add Other &OS..."
msgstr "Ouzhpennañ &RK all ..."
#: kde-qt-common/images.cpp:96
msgid "Add a non-Linux OS to the boot menu"
msgstr "Ouzhpennañ ur RK ha n'eo ket Linux d'ar meuziad loc'hañ"
#: kde-qt-common/images.cpp:97
msgid "&Remove Entry"
msgstr "&Dilemel ar bouetadur"
#: kde-qt-common/images.cpp:99
msgid "Remove entry from the boot menu"
msgstr ""
#: kde-qt-common/images.cpp:177
msgid ""
"Configuration ok. LILO said:\n"
msgstr ""
"Mad eo ar gefluniadur. Gouez da LILO :\n"
#: kde-qt-common/images.cpp:178
msgid "Configuration OK"
msgstr "Mat eo ar gefluniadur"
#: kde-qt-common/images.cpp:180
msgid ""
"Configuration NOT ok. LILO said:\n"
msgstr ""
"N'eo ket mad ar gefluniadur. Gouez da LILO :\n"
#: kde-qt-common/images.cpp:181
msgid "Configuration NOT ok"
msgstr "Fall eo ar gefluniadur"
#: kde-qt-common/images.cpp:187
msgid "&Kernel filename:"
msgstr "Anv ar restr &kalon :"
#: kde-qt-common/images.cpp:215
msgid "Boot from dis&k:"
msgstr "Loc'hañ eus ar bla&denn :"
#: kde-qt-common/images.cpp:215
msgid ""
"Enter the partition containing the operating system you'd like to boot here."
msgstr ""
#: kde-qt-common/images.cpp:216
msgid "Enter the label (name) of the operating system here."
msgstr ""
#: kde-qt-common/images.cpp:297
msgid "Dis&k:"
msgstr "&Pladenn :"
#: kde-qt-common/mainwidget.cpp:43
msgid "&General Options"
msgstr "Dibarzhoù &hollek"
#: kde-qt-common/mainwidget.cpp:44
msgid "&Operating Systems"
msgstr "&Reizhiadoù korvoiñ"
#: kde-qt-common/mainwidget.cpp:45 kde-qt-common/mainwidget.cpp:65
#: kde-qt-common/mainwidget.cpp:94 kde-qt-common/mainwidget.cpp:100
msgid "&Expert"
msgstr "&Mailh"
#: kde-qt-common/mainwidget.cpp:96 kde-qt-common/mainwidget.cpp:104
msgid "&General options"
msgstr "Dibarzhoù &hollek"
#: kde-qt-common/mainwidget.cpp:98 kde-qt-common/mainwidget.cpp:102
msgid "&Operating systems"
msgstr "&Reizhiadoù korvoiñ"
#: kde/Details.cpp:44 qt/Details.cpp:44
msgid "&Graphics mode on text console:"
msgstr ""
#: kde/Details.cpp:47 qt/Details.cpp:47
msgid ""
"You can select the graphics mode for this kernel here."
"<br>If you intend to use a VGA graphics mode, you must compile the kernel with "
"support for framebuffer devices. The <i>ask</i> setting brings up a prompt at "
"boot time."
msgstr ""
#: kde/Details.cpp:75 qt/Details.cpp:76
msgid "Mount root filesystem &read-only"
msgstr "Marc'hañ ar reizhiad restroù gwrizienn en el &lenn-hepken."
#: kde/Details.cpp:76 qt/Details.cpp:77
msgid ""
"Mount the root filesystem for this kernel read-only. Since the init scripts "
"normally take care of remounting the root filesystem in read-write mode after "
"running some checks, this should always be turned on."
"<br>Don't turn this off unless you know what you're doing."
msgstr ""
#: kde/Details.cpp:78 qt/Details.cpp:80
msgid "Do not check &partition table"
msgstr ""
#: kde/Details.cpp:79
msgid ""
"This turns off some sanity checks while writing the configuration. This should "
"not be used under \"normal\" circumstances, but it can be useful, for example, "
"by providing the capability of booting from a floppy disk, without having a "
"floppy in the drive every time you run lilo."
"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
msgstr ""
#: kde/Details.cpp:83 qt/Details.cpp:86
msgid ""
"Checking this box enables automatic recording of boot command lines as the "
"default for the following bootups. This way, lilo \"locks\" on a choice until "
"it is manually overridden."
"<br>This sets the <b>lock</b> option in lilo.conf"
msgstr ""
#: kde/Details.cpp:86 qt/Details.cpp:89
msgid ""
"If this box is checked, a password (entered below) is required only if any "
"parameters are changed (i.e. the user can boot <i>linux</i>, but not <i>"
"linux single</i> or <i>linux init=/bin/sh</i>).\n"
"This sets the <b>restricted</b> option in lilo.conf."
msgstr ""
#: kde/Details.cpp:94 qt/Details.cpp:98
msgid ""
"Enter the password required for bootup (if any) here. If <i>restricted</i> "
"above is checked, the password is required for additional parameters only."
"<br><b>WARNING:</b> The password is stored in clear text in /etc/lilo.conf. "
"You'll want to make sure nobody untrusted can read this file. Also, you "
"probably don't want to use your normal/root password here."
msgstr ""
#: kde/kcontrol.cpp:48
msgid "kcmlilo"
msgstr "kcmlilo"
#: kde/kcontrol.cpp:48
msgid "LILO Configuration"
msgstr "Kefluniadur LILO"
#: kde/kcontrol.cpp:50
msgid "(c) 2000, Bernhard Rosenkraenzer"
msgstr "(c) 2000, Bernhard Rosenkraenzer"
#: qt/Details.cpp:81
msgid ""
"This turns off some sanity checks while writing the configuration. This "
"shouldn't be used under \"normal\" circumstances, but it's useful, for example, "
"for installing the possibility to boot from a floppy disk without having a "
"floppy in the drive every time you run lilo."
"<br>This sets the <i>unsafe</i> keyword in lilo.conf."
msgstr ""
#: qt/standalone.cpp:41
msgid "&What's This?"
msgstr "&Petra zo ?"
#: qt/standalone.cpp:43
msgid ""
"The <i>What's This?</i> button is part of this program's help system. Click on "
"the What's This? button then on any widget in the window to get information "
"(like this) on it."
msgstr ""
#: qt/standalone.cpp:47
msgid ""
"This button calls up the program's online help system. If it does nothing, no "
"help file has been written (yet); in that case, use the <i>What's This</i> "
"button on the left."
msgstr ""
#: qt/standalone.cpp:49
msgid "&Default"
msgstr "&Dre ziouer"
#: qt/standalone.cpp:50
msgid ""
"This button resets all parameters to some (hopefully sane) default values."
msgstr ""
#: qt/standalone.cpp:52
msgid "&Reset"
msgstr "&Adkorañ"
#: qt/standalone.cpp:53
msgid ""
"This button resets all parameters to what they were before you started the "
"program."
msgstr ""
#: qt/standalone.cpp:56
msgid "This button saves all your changes without exiting."
msgstr ""
#: qt/standalone.cpp:59
msgid "This button saves all your changes and exits the program."
msgstr ""
#: qt/standalone.cpp:62
msgid "This button exits the program without saving your changes."
msgstr ""
#: _translatorinfo.cpp:1
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Thierry Vignaud, Jañ-Mai Drapier"
#: _translatorinfo.cpp:3
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "tvignaud@mandriva.com, jdrapier@club-internet.fr"