You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
libtdevnc/libvncserver/rfbserver.c

3458 lines
104 KiB

24 years ago
/*
* rfbserver.c - deal with server-side of the RFB protocol.
*/
/*
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
* Copyright (C) 2011-2012 D. R. Commander
* Copyright (C) 2005 Rohit Kumar, Johannes E. Schindelin
* Copyright (C) 2002 RealVNC Ltd.
24 years ago
* OSXvnc Copyright (C) 2001 Dan McGuirk <mcguirk@incompleteness.net>.
* Original Xvnc code Copyright (C) 1999 AT&T Laboratories Cambridge.
* All Rights Reserved.
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This software is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this software; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
* USA.
*/
#ifdef __STRICT_ANSI__
#define _BSD_SOURCE
#define _POSIX_SOURCE
#define _XOPEN_SOURCE 600
#endif
#include <stdio.h>
#include <string.h>
#include <rfb/rfb.h>
#include <rfb/rfbregion.h>
#include "private.h"
#ifdef LIBVNCSERVER_HAVE_FCNTL_H
#include <fcntl.h>
#endif
#ifdef WIN32
#define write(sock,buf,len) send(sock,buf,len,0)
#else
#ifdef LIBVNCSERVER_HAVE_UNISTD_H
24 years ago
#include <unistd.h>
#endif
24 years ago
#include <pwd.h>
#ifdef LIBVNCSERVER_HAVE_SYS_SOCKET_H
24 years ago
#include <sys/socket.h>
#endif
#ifdef LIBVNCSERVER_HAVE_NETINET_IN_H
24 years ago
#include <netinet/in.h>
#include <netinet/tcp.h>
#include <netdb.h>
24 years ago
#include <arpa/inet.h>
#endif
#endif
24 years ago
#ifdef DEBUGPROTO
#undef DEBUGPROTO
#define DEBUGPROTO(x) x
#else
#define DEBUGPROTO(x)
#endif
#include <stdarg.h>
#include <scale.h>
/* stst() */
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
/* readdir() */
#include <dirent.h>
/* errno */
#include <errno.h>
/* strftime() */
#include <time.h>
24 years ago
#ifdef LIBVNCSERVER_WITH_WEBSOCKETS
#include "rfbssl.h"
#endif
#ifdef __MINGW32__
static int compat_mkdir(const char *path, int mode)
{
return mkdir(path);
}
#define mkdir compat_mkdir
#endif
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
Add TurboVNC encoding support. TurboVNC is a variant of TightVNC that uses the same client/server protocol (RFB version 3.8t), and thus it is fully cross-compatible with TightVNC and TigerVNC (with one exception, which is noted below.) Both the TightVNC and TurboVNC encoders analyze each rectangle, pick out regions of solid color to send separately, and send the remaining subrectangles using mono, indexed color, JPEG, or raw encoding, depending on the number of colors in the subrectangle. However, TurboVNC uses a fundamentally different selection algorithm to determine the appropriate subencoding to use for each subrectangle. Thus, while it sends a protocol stream that can be decoded by any TightVNC-compatible viewer, the mix of subencoding types in this protocol stream will be different from those generated by a TightVNC server. The research that led to TurboVNC is described in the following report: http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf. In summary: 20 RFB captures, representing "common" 2D and 3D application workloads (the 3D workloads were run using VirtualGL), were studied using the TightVNC encoder in isolation. Some of the analysis features in the TightVNC encoder, such as smoothness detection, were found to generate a lot of CPU usage with little or no benefit in compression, so those features were disabled. JPEG encoding was accelerated using libjpeg-turbo (which achieves a 2-4x speedup over plain libjpeg on modern x86 or ARM processors.) Finally, the "palette threshold" (minimum number of colors that the subrectangle must have before it is compressed using JPEG or raw) was adjusted to account for the fact that JPEG encoding is now quite a bit faster (meaning that we can now use it more without a CPU penalty.) TurboVNC has additional optimizations, such as the ability to count colors and encode JPEG images directly from the framebuffer without first translating the pixels into RGB. The TurboVNC encoder compares quite favorably in terms of compression ratio with TightVNC and generally encodes a great deal faster (often an order of magnitude or more.) The version of the TurboVNC encoder included in this patch is roughly equivalent to the one found in version 0.6 of the Unix TurboVNC Server, with a few minor patches integrated from TurboVNC 1.1. TurboVNC 1.0 added multi-threading capabilities, which can be added in later if desired (at the expense of making libvncserver depend on libpthread.) Because TurboVNC uses a fundamentally different mix of subencodings than TightVNC, because it uses the identical protocol (and thus a viewer really has no idea whether it's talking to a TightVNC or TurboVNC server), and because it doesn't support rfbTightPng (and in fact conflicts with it-- see below), the TurboVNC and TightVNC encoders cannot be enabled simultaneously. Compatibility: In *most* cases, a TurboVNC-enabled viewer is fully compatible with a TightVNC server, and vice versa. TurboVNC supports pseudo-encodings for specifying a fine-grained (1-100) quality scale and specifying chrominance subsampling. If a TurboVNC viewer sends those to a TightVNC server, then the TightVNC server ignores them, so the TurboVNC viewer also sends the quality on a 0-9 scale that the TightVNC server can understand. Similarly, the TurboVNC server checks first for fine-grained quality and subsampling pseudo-encodings from the viewer, and failing to receive those, it then checks for the TightVNC 0-9 quality pseudo-encoding. There is one case in which the two systems are not compatible, and that is when a TightVNC or TigerVNC viewer requests compression level 0 without JPEG from a TurboVNC server. For performance reasons, this causes the TurboVNC server to send images directly to the viewer, bypassing Zlib. When the TurboVNC server does this, it also sets bits 7-4 in the compression control byte to rfbTightNoZlib (0x0A), which is unfortunately the same value as rfbTightPng. Older TightVNC viewers that don't handle PNG will assume that the stream is uncompressed but still encapsulated in a Zlib structure, whereas newer PNG-supporting TightVNC viewers will assume that the stream is PNG. In either case, the viewer will probably crash. Since most VNC viewers don't expose compression level 0 in the GUI, this is a relatively rare situation. Description of changes: configure.ac -- Added support for libjpeg-turbo. If passed an argument of --with-turbovnc, configure will now run (or, if cross-compiling, just link) a test program that determines whether the libjpeg library being used is libjpeg-turbo. libjpeg-turbo must be used when building the TurboVNC encoder, because the TurboVNC encoder relies on the libjpeg-turbo colorspace extensions in order to compress images directly out of the framebuffer (which may be, for instance, BGRA rather than RGB.) libjpeg-turbo can optionally be used with the TightVNC encoder as well, but the speedup will only be marginal (the report linked above explains why in more detail, but basically it's because of Amdahl's Law. The TightVNC encoder was designed with the assumption that JPEG had a very high CPU cost, and thus JPEG is used only sparingly.) -- Added a new configure variable, JPEG_LDFLAGS. This is necessitated by the fact that libjpeg-turbo often distributes libjpeg.a and libjpeg.so in /opt/libjpeg-turbo/lib32 or /opt/libjpeg-turbo/lib64, and many people prefer to statically link with it. Thus, more flexibility is needed than is provided by --with-jpeg. If JPEG_LDFLAGS is specified, then it overrides the changes to LDFLAGS enacted by --with-jpeg (but --with-jpeg is still used to set the include path.) The addition of JPEG_LDFLAGS necessitated replacing AC_CHECK_LIB with AC_LINK_IFELSE (because AC_CHECK_LIB automatically sets LIBS to -ljpeg, which is not what we want if we're, for instance, linking statically with libjpeg-turbo.) -- configure does not check for PNG support if TurboVNC encoding is enabled. This prevents the rfbSendRectEncodingTightPng() function from being compiled in, since the TurboVNC encoder doesn't (and can't) support it. common/turbojpeg.c, common/turbojpeg.h -- TurboJPEG is a simple API used to compress and decompress JPEG images in memory. It was originally implemented because it was desirable to use different types of underlying technologies to compress JPEG on different platforms (mediaLib on SPARC, Quicktime on PPC Macs, Intel Performance Primitives, etc.) These days, however, libjpeg-turbo is the only underlying technology used by TurboVNC, so TurboJPEG's purpose is largely just code simplicity and flexibility. Thus, since there is no real need for libvncserver to use any technology other than libjpeg-turbo for compressing JPEG, the TurboJPEG wrapper for libjpeg-turbo has been included in-tree so that libvncserver can be directly linked with libjpeg-turbo. This is convenient because many modern Linux distros (Fedora, Ubuntu, etc.) now ship libjpeg-turbo as their default libjpeg library. libvncserver/rfbserver.c -- Added logic to check for the TurboVNC fine-grained quality level and subsampling encodings and to map Tight (0-9) quality levels to appropriate fine-grained quality level and subsampling values if communicating with a TightVNC/TigerVNC viewer. libvncserver/turbo.c -- TurboVNC encoder (compiled instead of libvncserver/tight.c) rfb/rfb.h -- Added support for the TurboVNC subsampling level rfb/rfbproto.h -- Added constants for the TurboVNC fine quality level and subsampling encodings as well as the rfbTightNoZlib constant and notes on its usage.
13 years ago
/*
* Map of quality levels to provide compatibility with TightVNC/TigerVNC
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
* clients. This emulates the behavior of the TigerVNC Server.
Add TurboVNC encoding support. TurboVNC is a variant of TightVNC that uses the same client/server protocol (RFB version 3.8t), and thus it is fully cross-compatible with TightVNC and TigerVNC (with one exception, which is noted below.) Both the TightVNC and TurboVNC encoders analyze each rectangle, pick out regions of solid color to send separately, and send the remaining subrectangles using mono, indexed color, JPEG, or raw encoding, depending on the number of colors in the subrectangle. However, TurboVNC uses a fundamentally different selection algorithm to determine the appropriate subencoding to use for each subrectangle. Thus, while it sends a protocol stream that can be decoded by any TightVNC-compatible viewer, the mix of subencoding types in this protocol stream will be different from those generated by a TightVNC server. The research that led to TurboVNC is described in the following report: http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf. In summary: 20 RFB captures, representing "common" 2D and 3D application workloads (the 3D workloads were run using VirtualGL), were studied using the TightVNC encoder in isolation. Some of the analysis features in the TightVNC encoder, such as smoothness detection, were found to generate a lot of CPU usage with little or no benefit in compression, so those features were disabled. JPEG encoding was accelerated using libjpeg-turbo (which achieves a 2-4x speedup over plain libjpeg on modern x86 or ARM processors.) Finally, the "palette threshold" (minimum number of colors that the subrectangle must have before it is compressed using JPEG or raw) was adjusted to account for the fact that JPEG encoding is now quite a bit faster (meaning that we can now use it more without a CPU penalty.) TurboVNC has additional optimizations, such as the ability to count colors and encode JPEG images directly from the framebuffer without first translating the pixels into RGB. The TurboVNC encoder compares quite favorably in terms of compression ratio with TightVNC and generally encodes a great deal faster (often an order of magnitude or more.) The version of the TurboVNC encoder included in this patch is roughly equivalent to the one found in version 0.6 of the Unix TurboVNC Server, with a few minor patches integrated from TurboVNC 1.1. TurboVNC 1.0 added multi-threading capabilities, which can be added in later if desired (at the expense of making libvncserver depend on libpthread.) Because TurboVNC uses a fundamentally different mix of subencodings than TightVNC, because it uses the identical protocol (and thus a viewer really has no idea whether it's talking to a TightVNC or TurboVNC server), and because it doesn't support rfbTightPng (and in fact conflicts with it-- see below), the TurboVNC and TightVNC encoders cannot be enabled simultaneously. Compatibility: In *most* cases, a TurboVNC-enabled viewer is fully compatible with a TightVNC server, and vice versa. TurboVNC supports pseudo-encodings for specifying a fine-grained (1-100) quality scale and specifying chrominance subsampling. If a TurboVNC viewer sends those to a TightVNC server, then the TightVNC server ignores them, so the TurboVNC viewer also sends the quality on a 0-9 scale that the TightVNC server can understand. Similarly, the TurboVNC server checks first for fine-grained quality and subsampling pseudo-encodings from the viewer, and failing to receive those, it then checks for the TightVNC 0-9 quality pseudo-encoding. There is one case in which the two systems are not compatible, and that is when a TightVNC or TigerVNC viewer requests compression level 0 without JPEG from a TurboVNC server. For performance reasons, this causes the TurboVNC server to send images directly to the viewer, bypassing Zlib. When the TurboVNC server does this, it also sets bits 7-4 in the compression control byte to rfbTightNoZlib (0x0A), which is unfortunately the same value as rfbTightPng. Older TightVNC viewers that don't handle PNG will assume that the stream is uncompressed but still encapsulated in a Zlib structure, whereas newer PNG-supporting TightVNC viewers will assume that the stream is PNG. In either case, the viewer will probably crash. Since most VNC viewers don't expose compression level 0 in the GUI, this is a relatively rare situation. Description of changes: configure.ac -- Added support for libjpeg-turbo. If passed an argument of --with-turbovnc, configure will now run (or, if cross-compiling, just link) a test program that determines whether the libjpeg library being used is libjpeg-turbo. libjpeg-turbo must be used when building the TurboVNC encoder, because the TurboVNC encoder relies on the libjpeg-turbo colorspace extensions in order to compress images directly out of the framebuffer (which may be, for instance, BGRA rather than RGB.) libjpeg-turbo can optionally be used with the TightVNC encoder as well, but the speedup will only be marginal (the report linked above explains why in more detail, but basically it's because of Amdahl's Law. The TightVNC encoder was designed with the assumption that JPEG had a very high CPU cost, and thus JPEG is used only sparingly.) -- Added a new configure variable, JPEG_LDFLAGS. This is necessitated by the fact that libjpeg-turbo often distributes libjpeg.a and libjpeg.so in /opt/libjpeg-turbo/lib32 or /opt/libjpeg-turbo/lib64, and many people prefer to statically link with it. Thus, more flexibility is needed than is provided by --with-jpeg. If JPEG_LDFLAGS is specified, then it overrides the changes to LDFLAGS enacted by --with-jpeg (but --with-jpeg is still used to set the include path.) The addition of JPEG_LDFLAGS necessitated replacing AC_CHECK_LIB with AC_LINK_IFELSE (because AC_CHECK_LIB automatically sets LIBS to -ljpeg, which is not what we want if we're, for instance, linking statically with libjpeg-turbo.) -- configure does not check for PNG support if TurboVNC encoding is enabled. This prevents the rfbSendRectEncodingTightPng() function from being compiled in, since the TurboVNC encoder doesn't (and can't) support it. common/turbojpeg.c, common/turbojpeg.h -- TurboJPEG is a simple API used to compress and decompress JPEG images in memory. It was originally implemented because it was desirable to use different types of underlying technologies to compress JPEG on different platforms (mediaLib on SPARC, Quicktime on PPC Macs, Intel Performance Primitives, etc.) These days, however, libjpeg-turbo is the only underlying technology used by TurboVNC, so TurboJPEG's purpose is largely just code simplicity and flexibility. Thus, since there is no real need for libvncserver to use any technology other than libjpeg-turbo for compressing JPEG, the TurboJPEG wrapper for libjpeg-turbo has been included in-tree so that libvncserver can be directly linked with libjpeg-turbo. This is convenient because many modern Linux distros (Fedora, Ubuntu, etc.) now ship libjpeg-turbo as their default libjpeg library. libvncserver/rfbserver.c -- Added logic to check for the TurboVNC fine-grained quality level and subsampling encodings and to map Tight (0-9) quality levels to appropriate fine-grained quality level and subsampling values if communicating with a TightVNC/TigerVNC viewer. libvncserver/turbo.c -- TurboVNC encoder (compiled instead of libvncserver/tight.c) rfb/rfb.h -- Added support for the TurboVNC subsampling level rfb/rfbproto.h -- Added constants for the TurboVNC fine quality level and subsampling encodings as well as the rfbTightNoZlib constant and notes on its usage.
13 years ago
*/
static const int tight2turbo_qual[10] = {
15, 29, 41, 42, 62, 77, 79, 86, 92, 100
};
static const int tight2turbo_subsamp[10] = {
1, 1, 1, 2, 2, 2, 0, 0, 0, 0
};
#endif
24 years ago
static void rfbProcessClientProtocolVersion(rfbClientPtr cl);
static void rfbProcessClientNormalMessage(rfbClientPtr cl);
static void rfbProcessClientInitMessage(rfbClientPtr cl);
#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD
void rfbIncrClientRef(rfbClientPtr cl)
{
LOCK(cl->refCountMutex);
cl->refCount++;
UNLOCK(cl->refCountMutex);
}
void rfbDecrClientRef(rfbClientPtr cl)
{
LOCK(cl->refCountMutex);
cl->refCount--;
if(cl->refCount<=0) /* just to be sure also < 0 */
TSIGNAL(cl->deleteCond);
UNLOCK(cl->refCountMutex);
}
23 years ago
#else
void rfbIncrClientRef(rfbClientPtr cl) {}
void rfbDecrClientRef(rfbClientPtr cl) {}
#endif
#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD
static MUTEX(rfbClientListMutex);
#endif
24 years ago
struct rfbClientIterator {
rfbClientPtr next;
rfbScreenInfoPtr screen;
rfbBool closedToo;
24 years ago
};
void
rfbClientListInit(rfbScreenInfoPtr rfbScreen)
{
if(sizeof(rfbBool)!=1) {
/* a sanity check */
fprintf(stderr,"rfbBool's size is not 1 (%d)!\n",(int)sizeof(rfbBool));
/* we cannot continue, because rfbBool is supposed to be char everywhere */
exit(1);
}
rfbScreen->clientHead = NULL;
INIT_MUTEX(rfbClientListMutex);
24 years ago
}
rfbClientIteratorPtr
rfbGetClientIterator(rfbScreenInfoPtr rfbScreen)
{
rfbClientIteratorPtr i =
(rfbClientIteratorPtr)malloc(sizeof(struct rfbClientIterator));
i->next = NULL;
i->screen = rfbScreen;
i->closedToo = FALSE;
return i;
}
rfbClientIteratorPtr
rfbGetClientIteratorWithClosed(rfbScreenInfoPtr rfbScreen)
{
rfbClientIteratorPtr i =
(rfbClientIteratorPtr)malloc(sizeof(struct rfbClientIterator));
i->next = NULL;
i->screen = rfbScreen;
i->closedToo = TRUE;
return i;
24 years ago
}
rfbClientPtr
rfbClientIteratorHead(rfbClientIteratorPtr i)
{
#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD
if(i->next != 0) {
rfbDecrClientRef(i->next);
rfbIncrClientRef(i->screen->clientHead);
}
#endif
LOCK(rfbClientListMutex);
i->next = i->screen->clientHead;
UNLOCK(rfbClientListMutex);
return i->next;
}
24 years ago
rfbClientPtr
rfbClientIteratorNext(rfbClientIteratorPtr i)
24 years ago
{
if(i->next == 0) {
LOCK(rfbClientListMutex);
i->next = i->screen->clientHead;
UNLOCK(rfbClientListMutex);
} else {
IF_PTHREADS(rfbClientPtr cl = i->next);
i->next = i->next->next;
IF_PTHREADS(rfbDecrClientRef(cl));
}
#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD
if(!i->closedToo)
while(i->next && i->next->sock<0)
i->next = i->next->next;
if(i->next)
rfbIncrClientRef(i->next);
#endif
return i->next;
24 years ago
}
void
rfbReleaseClientIterator(rfbClientIteratorPtr iterator)
{
IF_PTHREADS(if(iterator->next) rfbDecrClientRef(iterator->next));
23 years ago
free(iterator);
24 years ago
}
/*
* rfbNewClientConnection is called from sockets.c when a new connection
* comes in.
*/
void
rfbNewClientConnection(rfbScreenInfoPtr rfbScreen,
int sock)
24 years ago
{
rfbNewClient(rfbScreen,sock);
24 years ago
}
/*
* rfbReverseConnection is called to make an outward
24 years ago
* connection to a "listening" RFB client.
*/
rfbClientPtr
rfbReverseConnection(rfbScreenInfoPtr rfbScreen,
char *host,
int port)
24 years ago
{
int sock;
rfbClientPtr cl;
if ((sock = rfbConnect(rfbScreen, host, port)) < 0)
24 years ago
return (rfbClientPtr)NULL;
cl = rfbNewClient(rfbScreen, sock);
24 years ago
if (cl) {
cl->reverseConnection = TRUE;
}
return cl;
}
void
rfbSetProtocolVersion(rfbScreenInfoPtr rfbScreen, int major_, int minor_)
{
/* Permit the server to set the version to report */
/* TODO: sanity checking */
if ((major_==3) && (minor_ > 2 && minor_ < 9))
{
rfbScreen->protocolMajorVersion = major_;
rfbScreen->protocolMinorVersion = minor_;
}
else
rfbLog("rfbSetProtocolVersion(%d,%d) set to invalid values\n", major_, minor_);
}
24 years ago
/*
* rfbNewClient is called when a new connection has been made by whatever
* means.
*/
static rfbClientPtr
rfbNewTCPOrUDPClient(rfbScreenInfoPtr rfbScreen,
int sock,
rfbBool isUDP)
24 years ago
{
rfbProtocolVersionMsg pv;
rfbClientIteratorPtr iterator;
rfbClientPtr cl,cl_;
#ifdef LIBVNCSERVER_IPv6
struct sockaddr_storage addr;
#else
struct sockaddr_in addr;
#endif
socklen_t addrlen = sizeof(addr);
rfbProtocolExtension* extension;
24 years ago
23 years ago
cl = (rfbClientPtr)calloc(sizeof(rfbClientRec),1);
24 years ago
cl->screen = rfbScreen;
cl->sock = sock;
cl->viewOnly = FALSE;
/* setup pseudo scaling */
cl->scaledScreen = rfbScreen;
cl->scaledScreen->scaledScreenRefCount++;
rfbResetStats(cl);
24 years ago
cl->clientData = NULL;
cl->clientGoneHook = rfbDoNothingWithClient;
if(isUDP) {
rfbLog(" accepted UDP client\n");
} else {
int one=1;
getpeername(sock, (struct sockaddr *)&addr, &addrlen);
#ifdef LIBVNCSERVER_IPv6
char host[1024];
if(getnameinfo((struct sockaddr*)&addr, addrlen, host, sizeof(host), NULL, 0, NI_NUMERICHOST) != 0) {
rfbLogPerror("rfbNewClient: error in getnameinfo");
cl->host = strdup("");
}
else
cl->host = strdup(host);
#else
cl->host = strdup(inet_ntoa(addr.sin_addr));
#endif
24 years ago
rfbLog(" other clients:\n");
iterator = rfbGetClientIterator(rfbScreen);
while ((cl_ = rfbClientIteratorNext(iterator)) != NULL) {
rfbLog(" %s\n",cl_->host);
}
rfbReleaseClientIterator(iterator);
24 years ago
if(!rfbSetNonBlocking(sock)) {
close(sock);
return NULL;
}
if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
(char *)&one, sizeof(one)) < 0) {
rfbLogPerror("setsockopt failed");
close(sock);
return NULL;
}
FD_SET(sock,&(rfbScreen->allFds));
rfbScreen->maxFd = max(sock,rfbScreen->maxFd);
INIT_MUTEX(cl->outputMutex);
INIT_MUTEX(cl->refCountMutex);
INIT_MUTEX(cl->sendMutex);
INIT_COND(cl->deleteCond);
24 years ago
cl->state = RFB_PROTOCOL_VERSION;
cl->reverseConnection = FALSE;
cl->readyForSetColourMapEntries = FALSE;
cl->useCopyRect = FALSE;
cl->preferredEncoding = -1;
cl->correMaxWidth = 48;
cl->correMaxHeight = 48;
#ifdef LIBVNCSERVER_HAVE_LIBZ
cl->zrleData = NULL;
#endif
cl->copyRegion = sraRgnCreate();
cl->copyDX = 0;
cl->copyDY = 0;
24 years ago
cl->modifiedRegion =
sraRgnCreateRect(0,0,rfbScreen->width,rfbScreen->height);
24 years ago
INIT_MUTEX(cl->updateMutex);
INIT_COND(cl->updateCond);
24 years ago
cl->requestedRegion = sraRgnCreate();
24 years ago
cl->format = cl->screen->serverFormat;
cl->translateFn = rfbTranslateNone;
cl->translateLookupTable = NULL;
24 years ago
LOCK(rfbClientListMutex);
IF_PTHREADS(cl->refCount = 0);
cl->next = rfbScreen->clientHead;
cl->prev = NULL;
if (rfbScreen->clientHead)
rfbScreen->clientHead->prev = cl;
24 years ago
rfbScreen->clientHead = cl;
UNLOCK(rfbClientListMutex);
24 years ago
#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG)
cl->tightQualityLevel = -1;
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
cl->tightCompressLevel = TIGHT_DEFAULT_COMPRESSION;
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
cl->turboSubsampLevel = TURBO_DEFAULT_SUBSAMP;
{
int i;
for (i = 0; i < 4; i++)
cl->zsActive[i] = FALSE;
}
#endif
#endif
24 years ago
cl->fileTransfer.fd = -1;
cl->enableCursorShapeUpdates = FALSE;
cl->enableCursorPosUpdates = FALSE;
cl->useRichCursorEncoding = FALSE;
cl->enableLastRectEncoding = FALSE;
cl->enableKeyboardLedState = FALSE;
cl->enableSupportedMessages = FALSE;
cl->enableSupportedEncodings = FALSE;
cl->enableServerIdentity = FALSE;
cl->lastKeyboardLedState = -1;
cl->cursorX = rfbScreen->cursorX;
cl->cursorY = rfbScreen->cursorY;
cl->useNewFBSize = FALSE;
24 years ago
#ifdef LIBVNCSERVER_HAVE_LIBZ
cl->compStreamInited = FALSE;
cl->compStream.total_in = 0;
cl->compStream.total_out = 0;
cl->compStream.zalloc = Z_NULL;
cl->compStream.zfree = Z_NULL;
cl->compStream.opaque = Z_NULL;
24 years ago
cl->zlibCompressLevel = 5;
#endif
24 years ago
cl->progressiveSliceY = 0;
cl->extensions = NULL;
cl->lastPtrX = -1;
#ifdef LIBVNCSERVER_WITH_WEBSOCKETS
/*
* Wait a few ms for the client to send one of:
* - Flash policy request
* - WebSockets connection (TLS/SSL or plain)
*/
if (!webSocketsCheck(cl)) {
/* Error reporting handled in webSocketsHandshake */
rfbCloseClient(cl);
rfbClientConnectionGone(cl);
return NULL;
}
#endif
sprintf(pv,rfbProtocolVersionFormat,rfbScreen->protocolMajorVersion,
rfbScreen->protocolMinorVersion);
24 years ago
if (rfbWriteExact(cl, pv, sz_rfbProtocolVersionMsg) < 0) {
24 years ago
rfbLogPerror("rfbNewClient: write");
rfbCloseClient(cl);
rfbClientConnectionGone(cl);
24 years ago
return NULL;
}
24 years ago
}
for(extension = rfbGetExtensionIterator(); extension;
extension=extension->next) {
void* data = NULL;
/* if the extension does not have a newClient method, it wants
* to be initialized later. */
if(extension->newClient && extension->newClient(cl, &data))
rfbEnableExtension(cl, extension, data);
}
rfbReleaseExtensionIterator();
switch (cl->screen->newClientHook(cl)) {
case RFB_CLIENT_ON_HOLD:
cl->onHold = TRUE;
break;
case RFB_CLIENT_ACCEPT:
cl->onHold = FALSE;
break;
case RFB_CLIENT_REFUSE:
rfbCloseClient(cl);
rfbClientConnectionGone(cl);
cl = NULL;
break;
}
24 years ago
return cl;
}
rfbClientPtr
rfbNewClient(rfbScreenInfoPtr rfbScreen,
int sock)
{
return(rfbNewTCPOrUDPClient(rfbScreen,sock,FALSE));
}
rfbClientPtr
rfbNewUDPClient(rfbScreenInfoPtr rfbScreen)
{
return((rfbScreen->udpClient=
rfbNewTCPOrUDPClient(rfbScreen,rfbScreen->udpSock,TRUE)));
}
24 years ago
/*
* rfbClientConnectionGone is called from sockets.c just after a connection
* has gone away.
*/
void
rfbClientConnectionGone(rfbClientPtr cl)
24 years ago
{
#if defined(LIBVNCSERVER_HAVE_LIBZ) && defined(LIBVNCSERVER_HAVE_LIBJPEG)
24 years ago
int i;
#endif
LOCK(rfbClientListMutex);
if (cl->prev)
cl->prev->next = cl->next;
else
cl->screen->clientHead = cl->next;
if (cl->next)
cl->next->prev = cl->prev;
Fix deadlock in threaded mode when using nested rfbClientIteratorNext() calls. Lengthy explanation follows... First, the scenario before this patch: We have three clients 1,2,3 connected. The main thread loops through them using rfbClientIteratorNext() (loop L1) and is currently at client 2 i.e. client 2's cl_2->refCount is 1. At this point we need to loop again through the clients, with cl_2->refCount == 1, i.e. do a loop L2 nested within loop L1. BUT: Now client 2 disconnects, it's clientInput thread terminates its clientOutput thread and calls rfbClientConnectionGone(). This LOCKs clientListMutex and WAITs for cl_2->refCount to become 0. This means this thread waits for the main thread to release cl_2. Waiting, with clientListMutex LOCKed! Meanwhile, the main thread is about to begin the inner rfbClientIteratorNext() loop L2. The first call to rfbClientIteratorNext() LOCKs clientListMutex. BAAM. This mutex is locked by cl2's clientInput thread and is only released when cl_2->refCount becomes 0. The main thread would decrement cl_2->refCount when it would continue with loop L1. But it's waiting for cl2's clientInput thread to release clientListMutex. Which never happens since this one's waiting for the main thread to decrement cl_2->refCount. DEADLOCK. Now, situation with this patch: Same as above, but when client 2 disconnects it's clientInput thread rfbClientConnectionGone(). This again LOCKs clientListMutex, removes cl_2 from the linked list and UNLOCKS clientListMutex. The WAIT for cl_2->refCount to become 0 is _after_ that. Waiting, with clientListMutex UNLOCKed! Therefore, the main thread can continue, do the inner loop L2 (now only looping through 1,3 - 2 was removed from the linked list) and continue with loop L1, finally decrementing cl_2->refCount, allowing cl2's clientInput thread to continue and terminate. The resources held by cl2 are not free()'d by rfbClientConnectionGone until cl2->refCount becomes 0, i.e. loop L1 has released cl2.
13 years ago
UNLOCK(rfbClientListMutex);
#ifdef LIBVNCSERVER_HAVE_LIBPTHREAD
if(cl->screen->backgroundLoop != FALSE) {
int i;
do {
LOCK(cl->refCountMutex);
i=cl->refCount;
if(i>0)
WAIT(cl->deleteCond,cl->refCountMutex);
UNLOCK(cl->refCountMutex);
} while(i>0);
}
#endif
if(cl->sock>=0)
close(cl->sock);
if (cl->scaledScreen!=NULL)
cl->scaledScreen->scaledScreenRefCount--;
#ifdef LIBVNCSERVER_HAVE_LIBZ
rfbFreeZrleData(cl);
#endif
rfbFreeUltraData(cl);
/* free buffers holding pixel data before and after encoding */
free(cl->beforeEncBuf);
free(cl->afterEncBuf);
if(cl->sock>=0)
FD_CLR(cl->sock,&(cl->screen->allFds));
24 years ago
cl->clientGoneHook(cl);
24 years ago
rfbLog("Client %s gone\n",cl->host);
free(cl->host);
#ifdef LIBVNCSERVER_HAVE_LIBZ
24 years ago
/* Release the compression state structures if any. */
if ( cl->compStreamInited ) {
24 years ago
deflateEnd( &(cl->compStream) );
}
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
24 years ago
for (i = 0; i < 4; i++) {
if (cl->zsActive[i])
deflateEnd(&cl->zsStruct[i]);
}
#endif
#endif
24 years ago
if (cl->screen->pointerClient == cl)
cl->screen->pointerClient = NULL;
24 years ago
sraRgnDestroy(cl->modifiedRegion);
23 years ago
sraRgnDestroy(cl->requestedRegion);
sraRgnDestroy(cl->copyRegion);
24 years ago
if (cl->translateLookupTable) free(cl->translateLookupTable);
TINI_COND(cl->updateCond);
TINI_MUTEX(cl->updateMutex);
/* make sure outputMutex is unlocked before destroying */
LOCK(cl->outputMutex);
UNLOCK(cl->outputMutex);
TINI_MUTEX(cl->outputMutex);
LOCK(cl->sendMutex);
UNLOCK(cl->sendMutex);
TINI_MUTEX(cl->sendMutex);
rfbPrintStats(cl);
rfbResetStats(cl);
24 years ago
free(cl);
24 years ago
}
/*
* rfbProcessClientMessage is called when there is data to read from a client.
*/
void
rfbProcessClientMessage(rfbClientPtr cl)
24 years ago
{
switch (cl->state) {
case RFB_PROTOCOL_VERSION:
rfbProcessClientProtocolVersion(cl);
return;
case RFB_SECURITY_TYPE:
rfbProcessClientSecurityType(cl);
return;
24 years ago
case RFB_AUTHENTICATION:
rfbAuthProcessClientMessage(cl);
return;
case RFB_INITIALISATION:
case RFB_INITIALISATION_SHARED:
24 years ago
rfbProcessClientInitMessage(cl);
return;
default:
rfbProcessClientNormalMessage(cl);
return;
}
}
/*
* rfbProcessClientProtocolVersion is called when the client sends its
* protocol version.
*/
static void
rfbProcessClientProtocolVersion(rfbClientPtr cl)
24 years ago
{
rfbProtocolVersionMsg pv;
23 years ago
int n, major_, minor_;
24 years ago
if ((n = rfbReadExact(cl, pv, sz_rfbProtocolVersionMsg)) <= 0) {
24 years ago
if (n == 0)
rfbLog("rfbProcessClientProtocolVersion: client gone\n");
else
rfbLogPerror("rfbProcessClientProtocolVersion: read");
rfbCloseClient(cl);
return;
}
pv[sz_rfbProtocolVersionMsg] = 0;
23 years ago
if (sscanf(pv,rfbProtocolVersionFormat,&major_,&minor_) != 2) {
rfbErr("rfbProcessClientProtocolVersion: not a valid RFB client: %s\n", pv);
rfbCloseClient(cl);
return;
24 years ago
}
rfbLog("Client Protocol Version %d.%d\n", major_, minor_);
24 years ago
23 years ago
if (major_ != rfbProtocolMajorVersion) {
rfbErr("RFB protocol version mismatch - server %d.%d, client %d.%d",
cl->screen->protocolMajorVersion, cl->screen->protocolMinorVersion,
major_,minor_);
rfbCloseClient(cl);
24 years ago
return;
}
/* Check for the minor version use either of the two standard version of RFB */
/*
* UltraVNC Viewer detects FileTransfer compatible servers via rfb versions
* 3.4, 3.6, 3.14, 3.16
* It's a bad method, but it is what they use to enable features...
* maintaining RFB version compatibility across multiple servers is a pain
* Should use something like ServerIdentity encoding
*/
cl->protocolMajorVersion = major_;
cl->protocolMinorVersion = minor_;
rfbLog("Protocol version sent %d.%d, using %d.%d\n",
major_, minor_, rfbProtocolMajorVersion, cl->protocolMinorVersion);
24 years ago
rfbAuthNewClient(cl);
}
void
rfbClientSendString(rfbClientPtr cl, const char *reason)
{
char *buf;
int len = strlen(reason);
rfbLog("rfbClientSendString(\"%s\")\n", reason);
buf = (char *)malloc(4 + len);
((uint32_t *)buf)[0] = Swap32IfLE(len);
memcpy(buf + 4, reason, len);
if (rfbWriteExact(cl, buf, 4 + len) < 0)
rfbLogPerror("rfbClientSendString: write");
free(buf);
rfbCloseClient(cl);
}
24 years ago
/*
* rfbClientConnFailed is called when a client connection has failed either
* because it talks the wrong protocol or it has failed authentication.
*/
void
rfbClientConnFailed(rfbClientPtr cl,
const char *reason)
24 years ago
{
char *buf;
int len = strlen(reason);
rfbLog("rfbClientConnFailed(\"%s\")\n", reason);
buf = (char *)malloc(8 + len);
((uint32_t *)buf)[0] = Swap32IfLE(rfbConnFailed);
((uint32_t *)buf)[1] = Swap32IfLE(len);
24 years ago
memcpy(buf + 8, reason, len);
if (rfbWriteExact(cl, buf, 8 + len) < 0)
24 years ago
rfbLogPerror("rfbClientConnFailed: write");
free(buf);
24 years ago
rfbCloseClient(cl);
}
/*
* rfbProcessClientInitMessage is called when the client sends its
* initialisation message.
*/
static void
rfbProcessClientInitMessage(rfbClientPtr cl)
24 years ago
{
rfbClientInitMsg ci;
union {
char buf[256];
rfbServerInitMsg si;
} u;
24 years ago
int len, n;
rfbClientIteratorPtr iterator;
rfbClientPtr otherCl;
rfbExtensionData* extension;
24 years ago
if (cl->state == RFB_INITIALISATION_SHARED) {
/* In this case behave as though an implicit ClientInit message has
* already been received with a shared-flag of true. */
ci.shared = 1;
/* Avoid the possibility of exposing the RFB_INITIALISATION_SHARED
* state to calling software. */
cl->state = RFB_INITIALISATION;
} else {
if ((n = rfbReadExact(cl, (char *)&ci,sz_rfbClientInitMsg)) <= 0) {
if (n == 0)
rfbLog("rfbProcessClientInitMessage: client gone\n");
else
rfbLogPerror("rfbProcessClientInitMessage: read");
rfbCloseClient(cl);
return;
}
24 years ago
}
memset(u.buf,0,sizeof(u.buf));
u.si.framebufferWidth = Swap16IfLE(cl->screen->width);
u.si.framebufferHeight = Swap16IfLE(cl->screen->height);
u.si.format = cl->screen->serverFormat;
u.si.format.redMax = Swap16IfLE(u.si.format.redMax);
u.si.format.greenMax = Swap16IfLE(u.si.format.greenMax);
u.si.format.blueMax = Swap16IfLE(u.si.format.blueMax);
24 years ago
strncpy(u.buf + sz_rfbServerInitMsg, cl->screen->desktopName, 127);
len = strlen(u.buf + sz_rfbServerInitMsg);
u.si.nameLength = Swap32IfLE(len);
24 years ago
if (rfbWriteExact(cl, u.buf, sz_rfbServerInitMsg + len) < 0) {
24 years ago
rfbLogPerror("rfbProcessClientInitMessage: write");
rfbCloseClient(cl);
return;
}
for(extension = cl->extensions; extension;) {
rfbExtensionData* next = extension->next;
if(extension->extension->init &&
!extension->extension->init(cl, extension->data))
/* extension requested that it be removed */
rfbDisableExtension(cl, extension->extension);
extension = next;
}
24 years ago
cl->state = RFB_NORMAL;
if (!cl->reverseConnection &&
(cl->screen->neverShared || (!cl->screen->alwaysShared && !ci.shared))) {
24 years ago
if (cl->screen->dontDisconnect) {
24 years ago
iterator = rfbGetClientIterator(cl->screen);
while ((otherCl = rfbClientIteratorNext(iterator)) != NULL) {
if ((otherCl != cl) && (otherCl->state == RFB_NORMAL)) {
rfbLog("-dontdisconnect: Not shared & existing client\n");
rfbLog(" refusing new client %s\n", cl->host);
rfbCloseClient(cl);
rfbReleaseClientIterator(iterator);
return;
}
}
rfbReleaseClientIterator(iterator);
} else {
iterator = rfbGetClientIterator(cl->screen);
while ((otherCl = rfbClientIteratorNext(iterator)) != NULL) {
if ((otherCl != cl) && (otherCl->state == RFB_NORMAL)) {
rfbLog("Not shared - closing connection to client %s\n",
otherCl->host);
rfbCloseClient(otherCl);
}
}
rfbReleaseClientIterator(iterator);
}
}
}
/* The values come in based on the scaled screen, we need to convert them to
* values based on the man screen's coordinate system
*/
static rfbBool rectSwapIfLEAndClip(uint16_t* x,uint16_t* y,uint16_t* w,uint16_t* h,
rfbClientPtr cl)
{
int x1=Swap16IfLE(*x);
int y1=Swap16IfLE(*y);
int w1=Swap16IfLE(*w);
int h1=Swap16IfLE(*h);
rfbScaledCorrection(cl->scaledScreen, cl->screen, &x1, &y1, &w1, &h1, "rectSwapIfLEAndClip");
*x = x1;
*y = y1;
*w = w1;
*h = h1;
if(*w>cl->screen->width-*x)
*w=cl->screen->width-*x;
/* possible underflow */
if(*w>cl->screen->width-*x)
return FALSE;
if(*h>cl->screen->height-*y)
*h=cl->screen->height-*y;
if(*h>cl->screen->height-*y)
return FALSE;
return TRUE;
}
24 years ago
/*
* Send keyboard state (PointerPos pseudo-encoding).
*/
rfbBool
rfbSendKeyboardLedState(rfbClientPtr cl)
{
rfbFramebufferUpdateRectHeader rect;
if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
rect.encoding = Swap32IfLE(rfbEncodingKeyboardLedState);
rect.r.x = Swap16IfLE(cl->lastKeyboardLedState);
rect.r.y = 0;
rect.r.w = 0;
rect.r.h = 0;
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,
sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
rfbStatRecordEncodingSent(cl, rfbEncodingKeyboardLedState, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader);
if (!rfbSendUpdateBuf(cl))
return FALSE;
return TRUE;
}
#define rfbSetBit(buffer, position) (buffer[(position & 255) / 8] |= (1 << (position % 8)))
/*
* Send rfbEncodingSupportedMessages.
*/
rfbBool
rfbSendSupportedMessages(rfbClientPtr cl)
{
rfbFramebufferUpdateRectHeader rect;
rfbSupportedMessages msgs;
if (cl->ublen + sz_rfbFramebufferUpdateRectHeader
+ sz_rfbSupportedMessages > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
rect.encoding = Swap32IfLE(rfbEncodingSupportedMessages);
rect.r.x = 0;
rect.r.y = 0;
rect.r.w = Swap16IfLE(sz_rfbSupportedMessages);
rect.r.h = 0;
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,
sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
memset((char *)&msgs, 0, sz_rfbSupportedMessages);
rfbSetBit(msgs.client2server, rfbSetPixelFormat);
rfbSetBit(msgs.client2server, rfbFixColourMapEntries);
rfbSetBit(msgs.client2server, rfbSetEncodings);
rfbSetBit(msgs.client2server, rfbFramebufferUpdateRequest);
rfbSetBit(msgs.client2server, rfbKeyEvent);
rfbSetBit(msgs.client2server, rfbPointerEvent);
rfbSetBit(msgs.client2server, rfbClientCutText);
rfbSetBit(msgs.client2server, rfbFileTransfer);
rfbSetBit(msgs.client2server, rfbSetScale);
/*rfbSetBit(msgs.client2server, rfbSetServerInput); */
/*rfbSetBit(msgs.client2server, rfbSetSW); */
/*rfbSetBit(msgs.client2server, rfbTextChat); */
rfbSetBit(msgs.client2server, rfbPalmVNCSetScaleFactor);
rfbSetBit(msgs.client2server, rfbXvp);
rfbSetBit(msgs.server2client, rfbFramebufferUpdate);
rfbSetBit(msgs.server2client, rfbSetColourMapEntries);
rfbSetBit(msgs.server2client, rfbBell);
rfbSetBit(msgs.server2client, rfbServerCutText);
rfbSetBit(msgs.server2client, rfbResizeFrameBuffer);
rfbSetBit(msgs.server2client, rfbPalmVNCReSizeFrameBuffer);
rfbSetBit(msgs.server2client, rfbXvp);
memcpy(&cl->updateBuf[cl->ublen], (char *)&msgs, sz_rfbSupportedMessages);
cl->ublen += sz_rfbSupportedMessages;
rfbStatRecordEncodingSent(cl, rfbEncodingSupportedMessages,
sz_rfbFramebufferUpdateRectHeader+sz_rfbSupportedMessages,
sz_rfbFramebufferUpdateRectHeader+sz_rfbSupportedMessages);
if (!rfbSendUpdateBuf(cl))
return FALSE;
return TRUE;
}
/*
* Send rfbEncodingSupportedEncodings.
*/
rfbBool
rfbSendSupportedEncodings(rfbClientPtr cl)
{
rfbFramebufferUpdateRectHeader rect;
static uint32_t supported[] = {
rfbEncodingRaw,
rfbEncodingCopyRect,
rfbEncodingRRE,
rfbEncodingCoRRE,
rfbEncodingHextile,
#ifdef LIBVNCSERVER_HAVE_LIBZ
rfbEncodingZlib,
rfbEncodingZRLE,
rfbEncodingZYWRLE,
#endif
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
rfbEncodingTight,
#endif
#ifdef LIBVNCSERVER_HAVE_LIBPNG
rfbEncodingTightPng,
#endif
rfbEncodingUltra,
rfbEncodingUltraZip,
rfbEncodingXCursor,
rfbEncodingRichCursor,
rfbEncodingPointerPos,
rfbEncodingLastRect,
rfbEncodingNewFBSize,
rfbEncodingKeyboardLedState,
rfbEncodingSupportedMessages,
rfbEncodingSupportedEncodings,
rfbEncodingServerIdentity,
};
uint32_t nEncodings = sizeof(supported) / sizeof(supported[0]), i;
/* think rfbSetEncodingsMsg */
if (cl->ublen + sz_rfbFramebufferUpdateRectHeader
+ (nEncodings * sizeof(uint32_t)) > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
rect.encoding = Swap32IfLE(rfbEncodingSupportedEncodings);
rect.r.x = 0;
rect.r.y = 0;
rect.r.w = Swap16IfLE(nEncodings * sizeof(uint32_t));
rect.r.h = Swap16IfLE(nEncodings);
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,
sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
for (i = 0; i < nEncodings; i++) {
uint32_t encoding = Swap32IfLE(supported[i]);
memcpy(&cl->updateBuf[cl->ublen], (char *)&encoding, sizeof(encoding));
cl->ublen += sizeof(encoding);
}
rfbStatRecordEncodingSent(cl, rfbEncodingSupportedEncodings,
sz_rfbFramebufferUpdateRectHeader+(nEncodings * sizeof(uint32_t)),
sz_rfbFramebufferUpdateRectHeader+(nEncodings * sizeof(uint32_t)));
if (!rfbSendUpdateBuf(cl))
return FALSE;
return TRUE;
}
void
rfbSetServerVersionIdentity(rfbScreenInfoPtr screen, char *fmt, ...)
{
char buffer[256];
va_list ap;
va_start(ap, fmt);
vsnprintf(buffer, sizeof(buffer)-1, fmt, ap);
va_end(ap);
if (screen->versionString!=NULL) free(screen->versionString);
screen->versionString = strdup(buffer);
}
/*
* Send rfbEncodingServerIdentity.
*/
rfbBool
rfbSendServerIdentity(rfbClientPtr cl)
{
rfbFramebufferUpdateRectHeader rect;
char buffer[512];
/* tack on our library version */
snprintf(buffer,sizeof(buffer)-1, "%s (%s)",
(cl->screen->versionString==NULL ? "unknown" : cl->screen->versionString),
LIBVNCSERVER_PACKAGE_STRING);
if (cl->ublen + sz_rfbFramebufferUpdateRectHeader
+ (strlen(buffer)+1) > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
rect.encoding = Swap32IfLE(rfbEncodingServerIdentity);
rect.r.x = 0;
rect.r.y = 0;
rect.r.w = Swap16IfLE(strlen(buffer)+1);
rect.r.h = 0;
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,
sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
memcpy(&cl->updateBuf[cl->ublen], buffer, strlen(buffer)+1);
cl->ublen += strlen(buffer)+1;
rfbStatRecordEncodingSent(cl, rfbEncodingServerIdentity,
sz_rfbFramebufferUpdateRectHeader+strlen(buffer)+1,
sz_rfbFramebufferUpdateRectHeader+strlen(buffer)+1);
if (!rfbSendUpdateBuf(cl))
return FALSE;
return TRUE;
}
/*
* Send an xvp server message
*/
rfbBool
rfbSendXvp(rfbClientPtr cl, uint8_t version, uint8_t code)
{
rfbXvpMsg xvp;
xvp.type = rfbXvp;
xvp.pad = 0;
xvp.version = version;
xvp.code = code;
LOCK(cl->sendMutex);
if (rfbWriteExact(cl, (char *)&xvp, sz_rfbXvpMsg) < 0) {
rfbLogPerror("rfbSendXvp: write");
rfbCloseClient(cl);
}
UNLOCK(cl->sendMutex);
rfbStatRecordMessageSent(cl, rfbXvp, sz_rfbXvpMsg, sz_rfbXvpMsg);
return TRUE;
}
rfbBool rfbSendTextChatMessage(rfbClientPtr cl, uint32_t length, char *buffer)
{
rfbTextChatMsg tc;
int bytesToSend=0;
memset((char *)&tc, 0, sizeof(tc));
tc.type = rfbTextChat;
tc.length = Swap32IfLE(length);
switch(length) {
case rfbTextChatOpen:
case rfbTextChatClose:
case rfbTextChatFinished:
bytesToSend=0;
break;
default:
bytesToSend=length;
if (bytesToSend>rfbTextMaxSize)
bytesToSend=rfbTextMaxSize;
}
if (cl->ublen + sz_rfbTextChatMsg + bytesToSend > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
memcpy(&cl->updateBuf[cl->ublen], (char *)&tc, sz_rfbTextChatMsg);
cl->ublen += sz_rfbTextChatMsg;
if (bytesToSend>0) {
memcpy(&cl->updateBuf[cl->ublen], buffer, bytesToSend);
cl->ublen += bytesToSend;
}
rfbStatRecordMessageSent(cl, rfbTextChat, sz_rfbTextChatMsg+bytesToSend, sz_rfbTextChatMsg+bytesToSend);
if (!rfbSendUpdateBuf(cl))
return FALSE;
return TRUE;
}
#define FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN(msg, cl, ret) \
if ((cl->screen->getFileTransferPermission != NULL \
&& cl->screen->getFileTransferPermission(cl) != TRUE) \
|| cl->screen->permitFileTransfer != TRUE) { \
rfbLog("%sUltra File Transfer is disabled, dropping client: %s\n", msg, cl->host); \
rfbCloseClient(cl); \
return ret; \
}
int DB = 1;
rfbBool rfbSendFileTransferMessage(rfbClientPtr cl, uint8_t contentType, uint8_t contentParam, uint32_t size, uint32_t length, const char *buffer)
{
rfbFileTransferMsg ft;
ft.type = rfbFileTransfer;
ft.contentType = contentType;
ft.contentParam = contentParam;
ft.pad = 0; /* UltraVNC did not Swap16LE(ft.contentParam) (Looks like it might be BigEndian) */
ft.size = Swap32IfLE(size);
ft.length = Swap32IfLE(length);
FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE);
/*
rfbLog("rfbSendFileTransferMessage( %dtype, %dparam, %dsize, %dlen, %p)\n", contentType, contentParam, size, length, buffer);
*/
LOCK(cl->sendMutex);
if (rfbWriteExact(cl, (char *)&ft, sz_rfbFileTransferMsg) < 0) {
rfbLogPerror("rfbSendFileTransferMessage: write");
rfbCloseClient(cl);
UNLOCK(cl->sendMutex);
return FALSE;
}
if (length>0)
{
if (rfbWriteExact(cl, buffer, length) < 0) {
rfbLogPerror("rfbSendFileTransferMessage: write");
rfbCloseClient(cl);
UNLOCK(cl->sendMutex);
return FALSE;
}
}
UNLOCK(cl->sendMutex);
rfbStatRecordMessageSent(cl, rfbFileTransfer, sz_rfbFileTransferMsg+length, sz_rfbFileTransferMsg+length);
return TRUE;
}
/*
* UltraVNC uses Windows Structures
*/
#define MAX_PATH 260
typedef struct {
uint32_t dwLowDateTime;
uint32_t dwHighDateTime;
} RFB_FILETIME;
typedef struct {
uint32_t dwFileAttributes;
RFB_FILETIME ftCreationTime;
RFB_FILETIME ftLastAccessTime;
RFB_FILETIME ftLastWriteTime;
uint32_t nFileSizeHigh;
uint32_t nFileSizeLow;
uint32_t dwReserved0;
uint32_t dwReserved1;
uint8_t cFileName[ MAX_PATH ];
uint8_t cAlternateFileName[ 14 ];
} RFB_FIND_DATA;
#define RFB_FILE_ATTRIBUTE_READONLY 0x1
#define RFB_FILE_ATTRIBUTE_HIDDEN 0x2
#define RFB_FILE_ATTRIBUTE_SYSTEM 0x4
#define RFB_FILE_ATTRIBUTE_DIRECTORY 0x10
#define RFB_FILE_ATTRIBUTE_ARCHIVE 0x20
#define RFB_FILE_ATTRIBUTE_NORMAL 0x80
#define RFB_FILE_ATTRIBUTE_TEMPORARY 0x100
#define RFB_FILE_ATTRIBUTE_COMPRESSED 0x800
rfbBool rfbFilenameTranslate2UNIX(rfbClientPtr cl, char *path, char *unixPath)
{
int x;
char *home=NULL;
FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE);
/* C: */
if (path[0]=='C' && path[1]==':')
strcpy(unixPath, &path[2]);
else
{
home = getenv("HOME");
if (home!=NULL)
{
strcpy(unixPath, home);
strcat(unixPath,"/");
strcat(unixPath, path);
}
else
strcpy(unixPath, path);
}
for (x=0;x<strlen(unixPath);x++)
if (unixPath[x]=='\\') unixPath[x]='/';
return TRUE;
}
rfbBool rfbFilenameTranslate2DOS(rfbClientPtr cl, char *unixPath, char *path)
{
int x;
FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE);
sprintf(path,"C:%s", unixPath);
for (x=2;x<strlen(path);x++)
if (path[x]=='/') path[x]='\\';
return TRUE;
}
rfbBool rfbSendDirContent(rfbClientPtr cl, int length, char *buffer)
{
char retfilename[MAX_PATH];
char path[MAX_PATH];
struct stat statbuf;
RFB_FIND_DATA win32filename;
int nOptLen = 0, retval=0;
DIR *dirp=NULL;
struct dirent *direntp=NULL;
FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE);
/* Client thinks we are Winblows */
rfbFilenameTranslate2UNIX(cl, buffer, path);
if (DB) rfbLog("rfbProcessFileTransfer() rfbDirContentRequest: rfbRDirContent: \"%s\"->\"%s\"\n",buffer, path);
dirp=opendir(path);
if (dirp==NULL)
return rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADirectory, 0, 0, NULL);
/* send back the path name (necessary for links) */
if (rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADirectory, 0, length, buffer)==FALSE) return FALSE;
for (direntp=readdir(dirp); direntp!=NULL; direntp=readdir(dirp))
{
/* get stats */
snprintf(retfilename,sizeof(retfilename),"%s/%s", path, direntp->d_name);
retval = stat(retfilename, &statbuf);
if (retval==0)
{
memset((char *)&win32filename, 0, sizeof(win32filename));
win32filename.dwFileAttributes = Swap32IfBE(RFB_FILE_ATTRIBUTE_NORMAL);
if (S_ISDIR(statbuf.st_mode))
win32filename.dwFileAttributes = Swap32IfBE(RFB_FILE_ATTRIBUTE_DIRECTORY);
win32filename.ftCreationTime.dwLowDateTime = Swap32IfBE(statbuf.st_ctime); /* Intel Order */
win32filename.ftCreationTime.dwHighDateTime = 0;
win32filename.ftLastAccessTime.dwLowDateTime = Swap32IfBE(statbuf.st_atime); /* Intel Order */
win32filename.ftLastAccessTime.dwHighDateTime = 0;
win32filename.ftLastWriteTime.dwLowDateTime = Swap32IfBE(statbuf.st_mtime); /* Intel Order */
win32filename.ftLastWriteTime.dwHighDateTime = 0;
win32filename.nFileSizeLow = Swap32IfBE(statbuf.st_size); /* Intel Order */
win32filename.nFileSizeHigh = 0;
win32filename.dwReserved0 = 0;
win32filename.dwReserved1 = 0;
/* If this had the full path, we would need to translate to DOS format ("C:\") */
/* rfbFilenameTranslate2DOS(cl, retfilename, win32filename.cFileName); */
strcpy((char *)win32filename.cFileName, direntp->d_name);
/* Do not show hidden files (but show how to move up the tree) */
if ((strcmp(direntp->d_name, "..")==0) || (direntp->d_name[0]!='.'))
{
nOptLen = sizeof(RFB_FIND_DATA) - MAX_PATH - 14 + strlen((char *)win32filename.cFileName);
/*
rfbLog("rfbProcessFileTransfer() rfbDirContentRequest: rfbRDirContent: Sending \"%s\"\n", (char *)win32filename.cFileName);
*/
if (rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADirectory, 0, nOptLen, (char *)&win32filename)==FALSE)
{
closedir(dirp);
return FALSE;
}
}
}
}
closedir(dirp);
/* End of the transfer */
return rfbSendFileTransferMessage(cl, rfbDirPacket, 0, 0, 0, NULL);
}
char *rfbProcessFileTransferReadBuffer(rfbClientPtr cl, uint32_t length)
{
char *buffer=NULL;
int n=0;
FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, NULL);
/*
rfbLog("rfbProcessFileTransferReadBuffer(%dlen)\n", length);
*/
if (length>0) {
buffer=malloc(length+1);
if (buffer!=NULL) {
if ((n = rfbReadExact(cl, (char *)buffer, length)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessFileTransferReadBuffer: read");
rfbCloseClient(cl);
/* NOTE: don't forget to free(buffer) if you return early! */
if (buffer!=NULL) free(buffer);
return NULL;
}
/* Null Terminate */
buffer[length]=0;
}
}
return buffer;
}
rfbBool rfbSendFileTransferChunk(rfbClientPtr cl)
{
/* Allocate buffer for compression */
unsigned char readBuf[sz_rfbBlockSize];
int bytesRead=0;
int retval=0;
fd_set wfds;
struct timeval tv;
int n;
#ifdef LIBVNCSERVER_HAVE_LIBZ
unsigned char compBuf[sz_rfbBlockSize + 1024];
unsigned long nMaxCompSize = sizeof(compBuf);
int nRetC = 0;
#endif
/*
* Don't close the client if we get into this one because
* it is called from many places to service file transfers.
* Note that permitFileTransfer is checked first.
*/
if (cl->screen->permitFileTransfer != TRUE ||
(cl->screen->getFileTransferPermission != NULL
&& cl->screen->getFileTransferPermission(cl) != TRUE)) {
return TRUE;
}
/* If not sending, or no file open... Return as if we sent something! */
if ((cl->fileTransfer.fd!=-1) && (cl->fileTransfer.sending==1))
{
FD_ZERO(&wfds);
FD_SET(cl->sock, &wfds);
/* return immediately */
tv.tv_sec = 0;
tv.tv_usec = 0;
n = select(cl->sock + 1, NULL, &wfds, NULL, &tv);
if (n<0) {
#ifdef WIN32
errno=WSAGetLastError();
#endif
rfbLog("rfbSendFileTransferChunk() select failed: %s\n", strerror(errno));
}
/* We have space on the transmit queue */
if (n > 0)
{
bytesRead = read(cl->fileTransfer.fd, readBuf, sz_rfbBlockSize);
switch (bytesRead) {
case 0:
/*
rfbLog("rfbSendFileTransferChunk(): End-Of-File Encountered\n");
*/
retval = rfbSendFileTransferMessage(cl, rfbEndOfFile, 0, 0, 0, NULL);
close(cl->fileTransfer.fd);
cl->fileTransfer.fd = -1;
cl->fileTransfer.sending = 0;
cl->fileTransfer.receiving = 0;
return retval;
case -1:
/* TODO : send an error msg to the client... */
#ifdef WIN32
errno=WSAGetLastError();
#endif
rfbLog("rfbSendFileTransferChunk(): %s\n",strerror(errno));
retval = rfbSendFileTransferMessage(cl, rfbAbortFileTransfer, 0, 0, 0, NULL);
close(cl->fileTransfer.fd);
cl->fileTransfer.fd = -1;
cl->fileTransfer.sending = 0;
cl->fileTransfer.receiving = 0;
return retval;
default:
/*
rfbLog("rfbSendFileTransferChunk(): Read %d bytes\n", bytesRead);
*/
if (!cl->fileTransfer.compressionEnabled)
return rfbSendFileTransferMessage(cl, rfbFilePacket, 0, 0, bytesRead, (char *)readBuf);
else
{
#ifdef LIBVNCSERVER_HAVE_LIBZ
nRetC = compress(compBuf, &nMaxCompSize, readBuf, bytesRead);
/*
rfbLog("Compressed the packet from %d -> %d bytes\n", nMaxCompSize, bytesRead);
*/
if ((nRetC==0) && (nMaxCompSize<bytesRead))
return rfbSendFileTransferMessage(cl, rfbFilePacket, 0, 1, nMaxCompSize, (char *)compBuf);
else
return rfbSendFileTransferMessage(cl, rfbFilePacket, 0, 0, bytesRead, (char *)readBuf);
#else
/* We do not support compression of the data stream */
return rfbSendFileTransferMessage(cl, rfbFilePacket, 0, 0, bytesRead, (char *)readBuf);
#endif
}
}
}
}
return TRUE;
}
rfbBool rfbProcessFileTransfer(rfbClientPtr cl, uint8_t contentType, uint8_t contentParam, uint32_t size, uint32_t length)
{
char *buffer=NULL, *p=NULL;
int retval=0;
char filename1[MAX_PATH];
char filename2[MAX_PATH];
char szFileTime[MAX_PATH];
struct stat statbuf;
uint32_t sizeHtmp=0;
int n=0;
char timespec[64];
#ifdef LIBVNCSERVER_HAVE_LIBZ
unsigned char compBuff[sz_rfbBlockSize];
unsigned long nRawBytes = sz_rfbBlockSize;
int nRet = 0;
#endif
FILEXFER_ALLOWED_OR_CLOSE_AND_RETURN("", cl, FALSE);
/*
rfbLog("rfbProcessFileTransfer(%dtype, %dparam, %dsize, %dlen)\n", contentType, contentParam, size, length);
*/
switch (contentType) {
case rfbDirContentRequest:
switch (contentParam) {
case rfbRDrivesList: /* Client requests the List of Local Drives */
/*
rfbLog("rfbProcessFileTransfer() rfbDirContentRequest: rfbRDrivesList:\n");
*/
/* Format when filled : "C:\<NULL>D:\<NULL>....Z:\<NULL><NULL>
*
* We replace the "\" char following the drive letter and ":"
* with a char corresponding to the type of drive
* We obtain something like "C:l<NULL>D:c<NULL>....Z:n\<NULL><NULL>"
* Isn't it ugly ?
* DRIVE_FIXED = 'l' (local?)
* DRIVE_REMOVABLE = 'f' (floppy?)
* DRIVE_CDROM = 'c'
* DRIVE_REMOTE = 'n'
*/
/* in unix, there are no 'drives' (We could list mount points though)
* We fake the root as a "C:" for the Winblows users
*/
filename2[0]='C';
filename2[1]=':';
filename2[2]='l';
filename2[3]=0;
filename2[4]=0;
retval = rfbSendFileTransferMessage(cl, rfbDirPacket, rfbADrivesList, 0, 5, filename2);
if (buffer!=NULL) free(buffer);
return retval;
break;
case rfbRDirContent: /* Client requests the content of a directory */
/*
rfbLog("rfbProcessFileTransfer() rfbDirContentRequest: rfbRDirContent\n");
*/
if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE;
retval = rfbSendDirContent(cl, length, buffer);
if (buffer!=NULL) free(buffer);
return retval;
}
break;
case rfbDirPacket:
rfbLog("rfbProcessFileTransfer() rfbDirPacket\n");
break;
case rfbFileAcceptHeader:
rfbLog("rfbProcessFileTransfer() rfbFileAcceptHeader\n");
break;
case rfbCommandReturn:
rfbLog("rfbProcessFileTransfer() rfbCommandReturn\n");
break;
case rfbFileChecksums:
/* Destination file already exists - the viewer sends the checksums */
rfbLog("rfbProcessFileTransfer() rfbFileChecksums\n");
break;
case rfbFileTransferAccess:
rfbLog("rfbProcessFileTransfer() rfbFileTransferAccess\n");
break;
/*
* sending from the server to the viewer
*/
case rfbFileTransferRequest:
/*
rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest:\n");
*/
/* add some space to the end of the buffer as we will be adding a timespec to it */
if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE;
/* The client requests a File */
rfbFilenameTranslate2UNIX(cl, buffer, filename1);
cl->fileTransfer.fd=open(filename1, O_RDONLY, 0744);
/*
*/
if (DB) rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest(\"%s\"->\"%s\") Open: %s fd=%d\n", buffer, filename1, (cl->fileTransfer.fd==-1?"Failed":"Success"), cl->fileTransfer.fd);
if (cl->fileTransfer.fd!=-1) {
if (fstat(cl->fileTransfer.fd, &statbuf)!=0) {
close(cl->fileTransfer.fd);
cl->fileTransfer.fd=-1;
}
else
{
/* Add the File Time Stamp to the filename */
strftime(timespec, sizeof(timespec), "%m/%d/%Y %H:%M",gmtime(&statbuf.st_ctime));
buffer=realloc(buffer, length + strlen(timespec) + 2); /* comma, and Null term */
if (buffer==NULL) {
rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest: Failed to malloc %d bytes\n", length + strlen(timespec) + 2);
return FALSE;
}
strcat(buffer,",");
strcat(buffer, timespec);
length = strlen(buffer);
if (DB) rfbLog("rfbProcessFileTransfer() buffer is now: \"%s\"\n", buffer);
}
}
/* The viewer supports compression if size==1 */
cl->fileTransfer.compressionEnabled = (size==1);
/*
rfbLog("rfbProcessFileTransfer() rfbFileTransferRequest(\"%s\"->\"%s\")%s\n", buffer, filename1, (size==1?" <Compression Enabled>":""));
*/
/* File Size in bytes, 0xFFFFFFFF (-1) means error */
retval = rfbSendFileTransferMessage(cl, rfbFileHeader, 0, (cl->fileTransfer.fd==-1 ? -1 : statbuf.st_size), length, buffer);
if (cl->fileTransfer.fd==-1)
{
if (buffer!=NULL) free(buffer);
return retval;
}
/* setup filetransfer stuff */
cl->fileTransfer.fileSize = statbuf.st_size;
cl->fileTransfer.numPackets = statbuf.st_size / sz_rfbBlockSize;
cl->fileTransfer.receiving = 0;
cl->fileTransfer.sending = 0; /* set when we receive a rfbFileHeader: */
/* TODO: finish 64-bit file size support */
sizeHtmp = 0;
LOCK(cl->sendMutex);
if (rfbWriteExact(cl, (char *)&sizeHtmp, 4) < 0) {
rfbLogPerror("rfbProcessFileTransfer: write");
rfbCloseClient(cl);
UNLOCK(cl->sendMutex);
if (buffer!=NULL) free(buffer);
return FALSE;
}
UNLOCK(cl->sendMutex);
break;
case rfbFileHeader:
/* Destination file (viewer side) is ready for reception (size > 0) or not (size = -1) */
if (size==-1) {
rfbLog("rfbProcessFileTransfer() rfbFileHeader (error, aborting)\n");
close(cl->fileTransfer.fd);
cl->fileTransfer.fd=-1;
return TRUE;
}
/*
rfbLog("rfbProcessFileTransfer() rfbFileHeader (%d bytes of a file)\n", size);
*/
/* Starts the transfer! */
cl->fileTransfer.sending=1;
return rfbSendFileTransferChunk(cl);
break;
/*
* sending from the viewer to the server
*/
case rfbFileTransferOffer:
/* client is sending a file to us */
/* buffer contains full path name (plus FileTime) */
/* size contains size of the file */
/*
rfbLog("rfbProcessFileTransfer() rfbFileTransferOffer:\n");
*/
if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE;
/* Parse the FileTime */
p = strrchr(buffer, ',');
if (p!=NULL) {
*p = '\0';
strcpy(szFileTime, p+1);
} else
szFileTime[0]=0;
/* Need to read in sizeHtmp */
if ((n = rfbReadExact(cl, (char *)&sizeHtmp, 4)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessFileTransfer: read sizeHtmp");
rfbCloseClient(cl);
/* NOTE: don't forget to free(buffer) if you return early! */
if (buffer!=NULL) free(buffer);
return FALSE;
}
sizeHtmp = Swap32IfLE(sizeHtmp);
rfbFilenameTranslate2UNIX(cl, buffer, filename1);
/* If the file exists... We can send a rfbFileChecksums back to the client before we send an rfbFileAcceptHeader */
/* TODO: Delta Transfer */
cl->fileTransfer.fd=open(filename1, O_CREAT|O_WRONLY|O_TRUNC, 0744);
if (DB) rfbLog("rfbProcessFileTransfer() rfbFileTransferOffer(\"%s\"->\"%s\") %s %s fd=%d\n", buffer, filename1, (cl->fileTransfer.fd==-1?"Failed":"Success"), (cl->fileTransfer.fd==-1?strerror(errno):""), cl->fileTransfer.fd);
/*
*/
/* File Size in bytes, 0xFFFFFFFF (-1) means error */
retval = rfbSendFileTransferMessage(cl, rfbFileAcceptHeader, 0, (cl->fileTransfer.fd==-1 ? -1 : 0), length, buffer);
if (cl->fileTransfer.fd==-1) {
free(buffer);
return retval;
}
/* setup filetransfer stuff */
cl->fileTransfer.fileSize = size;
cl->fileTransfer.numPackets = size / sz_rfbBlockSize;
cl->fileTransfer.receiving = 1;
cl->fileTransfer.sending = 0;
break;
case rfbFilePacket:
/*
rfbLog("rfbProcessFileTransfer() rfbFilePacket:\n");
*/
if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE;
if (cl->fileTransfer.fd!=-1) {
/* buffer contains the contents of the file */
if (size==0)
retval=write(cl->fileTransfer.fd, buffer, length);
else
{
#ifdef LIBVNCSERVER_HAVE_LIBZ
/* compressed packet */
nRet = uncompress(compBuff,&nRawBytes,(const unsigned char*)buffer, length);
if(nRet == Z_OK)
retval=write(cl->fileTransfer.fd, (char*)compBuff, nRawBytes);
else
retval = -1;
#else
/* Write the file out as received... */
retval=write(cl->fileTransfer.fd, buffer, length);
#endif
}
if (retval==-1)
{
close(cl->fileTransfer.fd);
cl->fileTransfer.fd=-1;
cl->fileTransfer.sending = 0;
cl->fileTransfer.receiving = 0;
}
}
break;
case rfbEndOfFile:
if (DB) rfbLog("rfbProcessFileTransfer() rfbEndOfFile\n");
/*
*/
if (cl->fileTransfer.fd!=-1)
close(cl->fileTransfer.fd);
cl->fileTransfer.fd=-1;
cl->fileTransfer.sending = 0;
cl->fileTransfer.receiving = 0;
break;
case rfbAbortFileTransfer:
if (DB) rfbLog("rfbProcessFileTransfer() rfbAbortFileTransfer\n");
/*
*/
if (cl->fileTransfer.fd!=-1)
{
close(cl->fileTransfer.fd);
cl->fileTransfer.fd=-1;
cl->fileTransfer.sending = 0;
cl->fileTransfer.receiving = 0;
}
else
{
/* We use this message for FileTransfer rights (<=RC18 versions)
* The client asks for FileTransfer permission
*/
if (contentParam == 0)
{
rfbLog("rfbProcessFileTransfer() File Transfer Permission DENIED! (Client Version <=RC18)\n");
/* Old method for FileTransfer handshake perimssion (<=RC18) (Deny it)*/
return rfbSendFileTransferMessage(cl, rfbAbortFileTransfer, 0, -1, 0, "");
}
/* New method is allowed */
if (cl->screen->getFileTransferPermission!=NULL)
{
if (cl->screen->getFileTransferPermission(cl)==TRUE)
{
rfbLog("rfbProcessFileTransfer() File Transfer Permission Granted!\n");
return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, 1 , 0, ""); /* Permit */
}
else
{
rfbLog("rfbProcessFileTransfer() File Transfer Permission DENIED!\n");
return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, -1 , 0, ""); /* Deny */
}
}
else
{
if (cl->screen->permitFileTransfer)
{
rfbLog("rfbProcessFileTransfer() File Transfer Permission Granted!\n");
return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, 1 , 0, ""); /* Permit */
}
else
{
rfbLog("rfbProcessFileTransfer() File Transfer Permission DENIED by default!\n");
return rfbSendFileTransferMessage(cl, rfbFileTransferAccess, 0, -1 , 0, ""); /* DEFAULT: DENY (for security) */
}
}
}
break;
case rfbCommand:
/*
rfbLog("rfbProcessFileTransfer() rfbCommand:\n");
*/
if ((buffer = rfbProcessFileTransferReadBuffer(cl, length))==NULL) return FALSE;
switch (contentParam) {
case rfbCDirCreate: /* Client requests the creation of a directory */
rfbFilenameTranslate2UNIX(cl, buffer, filename1);
retval = mkdir(filename1, 0755);
if (DB) rfbLog("rfbProcessFileTransfer() rfbCommand: rfbCDirCreate(\"%s\"->\"%s\") %s\n", buffer, filename1, (retval==-1?"Failed":"Success"));
/*
*/
retval = rfbSendFileTransferMessage(cl, rfbCommandReturn, rfbADirCreate, retval, length, buffer);
if (buffer!=NULL) free(buffer);
return retval;
case rfbCFileDelete: /* Client requests the deletion of a file */
rfbFilenameTranslate2UNIX(cl, buffer, filename1);
if (stat(filename1,&statbuf)==0)
{
if (S_ISDIR(statbuf.st_mode))
retval = rmdir(filename1);
else
retval = unlink(filename1);
}
else retval=-1;
retval = rfbSendFileTransferMessage(cl, rfbCommandReturn, rfbAFileDelete, retval, length, buffer);
if (buffer!=NULL) free(buffer);
return retval;
case rfbCFileRename: /* Client requests the Renaming of a file/directory */
p = strrchr(buffer, '*');
if (p != NULL)
{
/* Split into 2 filenames ('*' is a seperator) */
*p = '\0';
rfbFilenameTranslate2UNIX(cl, buffer, filename1);
rfbFilenameTranslate2UNIX(cl, p+1, filename2);
retval = rename(filename1,filename2);
if (DB) rfbLog("rfbProcessFileTransfer() rfbCommand: rfbCFileRename(\"%s\"->\"%s\" -->> \"%s\"->\"%s\") %s\n", buffer, filename1, p+1, filename2, (retval==-1?"Failed":"Success"));
/*
*/
/* Restore the buffer so the reply is good */
*p = '*';
retval = rfbSendFileTransferMessage(cl, rfbCommandReturn, rfbAFileRename, retval, length, buffer);
if (buffer!=NULL) free(buffer);
return retval;
}
break;
}
break;
}
/* NOTE: don't forget to free(buffer) if you return early! */
if (buffer!=NULL) free(buffer);
return TRUE;
}
24 years ago
/*
* rfbProcessClientNormalMessage is called when the client has sent a normal
* protocol message.
*/
static void
rfbProcessClientNormalMessage(rfbClientPtr cl)
24 years ago
{
int n=0;
rfbClientToServerMsg msg;
char *str;
int i;
uint32_t enc=0;
uint32_t lastPreferredEncoding = -1;
char encBuf[64];
char encBuf2[64];
24 years ago
#ifdef LIBVNCSERVER_WITH_WEBSOCKETS
if (cl->wsctx && webSocketCheckDisconnect(cl))
return;
#endif
if ((n = rfbReadExact(cl, (char *)&msg, 1)) <= 0) {
24 years ago
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
switch (msg.type) {
case rfbSetPixelFormat:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
24 years ago
sz_rfbSetPixelFormatMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
cl->format.bitsPerPixel = msg.spf.format.bitsPerPixel;
cl->format.depth = msg.spf.format.depth;
cl->format.bigEndian = (msg.spf.format.bigEndian ? TRUE : FALSE);
cl->format.trueColour = (msg.spf.format.trueColour ? TRUE : FALSE);
24 years ago
cl->format.redMax = Swap16IfLE(msg.spf.format.redMax);
cl->format.greenMax = Swap16IfLE(msg.spf.format.greenMax);
cl->format.blueMax = Swap16IfLE(msg.spf.format.blueMax);
cl->format.redShift = msg.spf.format.redShift;
cl->format.greenShift = msg.spf.format.greenShift;
cl->format.blueShift = msg.spf.format.blueShift;
cl->readyForSetColourMapEntries = TRUE;
cl->screen->setTranslateFunction(cl);
24 years ago
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetPixelFormatMsg, sz_rfbSetPixelFormatMsg);
24 years ago
return;
case rfbFixColourMapEntries:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
24 years ago
sz_rfbFixColourMapEntriesMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetPixelFormatMsg, sz_rfbSetPixelFormatMsg);
24 years ago
rfbLog("rfbProcessClientNormalMessage: %s",
"FixColourMapEntries unsupported\n");
rfbCloseClient(cl);
return;
/* NOTE: Some clients send us a set of encodings (ie: PointerPos) designed to enable/disable features...
* We may want to look into this...
* Example:
* case rfbEncodingXCursor:
* cl->enableCursorShapeUpdates = TRUE;
*
* Currently: cl->enableCursorShapeUpdates can *never* be turned off...
*/
24 years ago
case rfbSetEncodings:
{
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
24 years ago
sz_rfbSetEncodingsMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
msg.se.nEncodings = Swap16IfLE(msg.se.nEncodings);
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetEncodingsMsg+(msg.se.nEncodings*4),sz_rfbSetEncodingsMsg+(msg.se.nEncodings*4));
/*
* UltraVNC Client has the ability to adapt to changing network environments
* So, let's give it a change to tell us what it wants now!
*/
if (cl->preferredEncoding!=-1)
lastPreferredEncoding = cl->preferredEncoding;
/* Reset all flags to defaults (allows us to switch between PointerPos and Server Drawn Cursors) */
cl->preferredEncoding=-1;
cl->useCopyRect = FALSE;
cl->useNewFBSize = FALSE;
cl->cursorWasChanged = FALSE;
cl->useRichCursorEncoding = FALSE;
cl->enableCursorPosUpdates = FALSE;
cl->enableCursorShapeUpdates = FALSE;
cl->enableCursorShapeUpdates = FALSE;
cl->enableLastRectEncoding = FALSE;
cl->enableKeyboardLedState = FALSE;
cl->enableSupportedMessages = FALSE;
cl->enableSupportedEncodings = FALSE;
cl->enableServerIdentity = FALSE;
#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG)
cl->tightQualityLevel = -1;
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
cl->tightCompressLevel = TIGHT_DEFAULT_COMPRESSION;
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
cl->turboSubsampLevel = TURBO_DEFAULT_SUBSAMP;
cl->turboQualityLevel = -1;
#endif
#endif
24 years ago
for (i = 0; i < msg.se.nEncodings; i++) {
if ((n = rfbReadExact(cl, (char *)&enc, 4)) <= 0) {
24 years ago
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
enc = Swap32IfLE(enc);
switch (enc) {
case rfbEncodingCopyRect:
cl->useCopyRect = TRUE;
break;
case rfbEncodingRaw:
case rfbEncodingRRE:
case rfbEncodingCoRRE:
case rfbEncodingHextile:
case rfbEncodingUltra:
#ifdef LIBVNCSERVER_HAVE_LIBZ
24 years ago
case rfbEncodingZlib:
case rfbEncodingZRLE:
case rfbEncodingZYWRLE:
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
24 years ago
case rfbEncodingTight:
#endif
#endif
#ifdef LIBVNCSERVER_HAVE_LIBPNG
case rfbEncodingTightPng:
#endif
/* The first supported encoding is the 'preferred' encoding */
if (cl->preferredEncoding == -1)
cl->preferredEncoding = enc;
break;
24 years ago
case rfbEncodingXCursor:
if(!cl->screen->dontConvertRichCursorToXCursor) {
rfbLog("Enabling X-style cursor updates for client %s\n",
cl->host);
/* if cursor was drawn, hide the cursor */
if(!cl->enableCursorShapeUpdates)
rfbRedrawAfterHideCursor(cl,NULL);
cl->enableCursorShapeUpdates = TRUE;
cl->cursorWasChanged = TRUE;
}
24 years ago
break;
case rfbEncodingRichCursor:
rfbLog("Enabling full-color cursor updates for client %s\n",
cl->host);
/* if cursor was drawn, hide the cursor */
if(!cl->enableCursorShapeUpdates)
rfbRedrawAfterHideCursor(cl,NULL);
cl->enableCursorShapeUpdates = TRUE;
cl->useRichCursorEncoding = TRUE;
cl->cursorWasChanged = TRUE;
break;
case rfbEncodingPointerPos:
if (!cl->enableCursorPosUpdates) {
rfbLog("Enabling cursor position updates for client %s\n",
cl->host);
cl->enableCursorPosUpdates = TRUE;
cl->cursorWasMoved = TRUE;
}
break;
24 years ago
case rfbEncodingLastRect:
if (!cl->enableLastRectEncoding) {
rfbLog("Enabling LastRect protocol extension for client "
"%s\n", cl->host);
cl->enableLastRectEncoding = TRUE;
}
break;
case rfbEncodingNewFBSize:
if (!cl->useNewFBSize) {
rfbLog("Enabling NewFBSize protocol extension for client "
"%s\n", cl->host);
cl->useNewFBSize = TRUE;
}
break;
case rfbEncodingKeyboardLedState:
if (!cl->enableKeyboardLedState) {
rfbLog("Enabling KeyboardLedState protocol extension for client "
"%s\n", cl->host);
cl->enableKeyboardLedState = TRUE;
}
break;
case rfbEncodingSupportedMessages:
if (!cl->enableSupportedMessages) {
rfbLog("Enabling SupportedMessages protocol extension for client "
"%s\n", cl->host);
cl->enableSupportedMessages = TRUE;
}
break;
case rfbEncodingSupportedEncodings:
if (!cl->enableSupportedEncodings) {
rfbLog("Enabling SupportedEncodings protocol extension for client "
"%s\n", cl->host);
cl->enableSupportedEncodings = TRUE;
}
break;
case rfbEncodingServerIdentity:
if (!cl->enableServerIdentity) {
rfbLog("Enabling ServerIdentity protocol extension for client "
"%s\n", cl->host);
cl->enableServerIdentity = TRUE;
}
break;
case rfbEncodingXvp:
rfbLog("Enabling Xvp protocol extension for client "
"%s\n", cl->host);
if (!rfbSendXvp(cl, 1, rfbXvp_Init)) {
rfbCloseClient(cl);
return;
}
break;
24 years ago
default:
#if defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG)
if ( enc >= (uint32_t)rfbEncodingCompressLevel0 &&
enc <= (uint32_t)rfbEncodingCompressLevel9 ) {
24 years ago
cl->zlibCompressLevel = enc & 0x0F;
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
24 years ago
cl->tightCompressLevel = enc & 0x0F;
rfbLog("Using compression level %d for client %s\n",
cl->tightCompressLevel, cl->host);
#endif
} else if ( enc >= (uint32_t)rfbEncodingQualityLevel0 &&
enc <= (uint32_t)rfbEncodingQualityLevel9 ) {
24 years ago
cl->tightQualityLevel = enc & 0x0F;
rfbLog("Using image quality level %d for client %s\n",
cl->tightQualityLevel, cl->host);
Replace TightVNC encoder with TurboVNC encoder. This patch is the result of further research and discussion that revealed the following: -- TightPng encoding and the rfbTightNoZlib extension need not conflict. Since TightPng is a separate encoding type, not supported by TurboVNC-compatible viewers, then the rfbTightNoZlib extension can be used solely whenever the encoding type is Tight and disabled with the encoding type is TightPng. -- In the TightVNC encoder, compression levels above 5 are basically useless. On the set of 20 low-level datasets that were used to design the TurboVNC encoder (these include the eight 2D application captures that were also used when designing the TightVNC encoder, as well as 12 3D application captures provided by the VirtualGL Project-- see http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf), moving from Compression Level (CL) 5 to CL 9 in the TightVNC encoder did not increase the compression ratio of any datasets more than 10%, and the compression ratio only increased by more than 5% on four of them. The compression ratio actually decreased a few percent on five of them. In exchange for this paltry increase in compression ratio, the CPU usage, on average, went up by a factor of 5. Thus, for all intents and purposes, TightVNC CL 5 provides the "best useful compression" for that encoder. -- TurboVNC's best compression level (CL 2) compresses 3D and video workloads significantly more "tightly" than TightVNC CL 5 (~70% better, in the aggregate) but does not quite achieve the same level of compression with 2D workloads (~20% worse, in the aggregate.) This decrease in compression ratio may or may not be noticeable, since many of the datasets it affects are not performance-critical (such as the console output of a compilation, etc.) However, for peace of mind, it was still desirable to have a mode that compressed with equal "tightness" to TightVNC CL 5, since we proposed to replace that encoder entirely. -- A new mode was discovered in the TurboVNC encoder that produces, in the aggregate, similar compression ratios on 2D datasets as TightVNC CL 5. That new mode involves using Zlib level 7 (the same level used by TightVNC CL 5) but setting the "palette threshold" to 256, so that indexed color encoding is used whenever possible. This mode reduces bandwidth only marginally (typically 10-20%) relative to TurboVNC CL 2 on low-color workloads, in exchange for nearly doubling CPU usage, and it does not benefit high-color workloads at all (since those are usually encoded with JPEG.) However, it provides a means of reproducing the same "tightness" as the TightVNC encoder on 2D workloads without sacrificing any compression for 3D/video workloads, and without using any more CPU time than necessary. -- The TurboVNC encoder still performs as well or better than the TightVNC encoder when plain libjpeg is used instead of libjpeg-turbo. Specific notes follow: common/turbojpeg.c common/turbojpeg.h: Added code to emulate the libjpeg-turbo colorspace extensions, so that the TurboJPEG wrapper can be used with plain libjpeg as well. This required updating the TurboJPEG wrapper to the latest code from libjpeg-turbo 1.2.0, mainly because the TurboJPEG 1.2 API handles pixel formats in a much cleaner way, which made the conversion code easier to write. It also eases the maintenance to have the wrapper synced as much as possible with the upstream code base (so I can merge any relevant bug fixes that are discovered upstream.) The libvncserver version of the TurboJPEG wrapper is a "lite" version, containing only the JPEG compression/decompression code and not the lossless transform, YUV encoding/decoding, and dynamic buffer allocation features from TurboJPEG 1.2. configure.ac: Removed the --with-turbovnc option. configure still checks for the presence of libjpeg-turbo, but only for the purposes of printing a performance warning if it isn't available. rfb/rfb.h: Fix a bug introduced with the initial TurboVNC encoder patch. We cannot use tightQualityLevel for the TurboVNC 1-100 quality level, because tightQualityLevel is also used by ZRLE. Thus, a new parameter (turboQualityLevel) was created. rfb/rfbproto.h: Remove TurboVNC-specific #ifdefs and language libvncserver/rfbserver.c: Remove TurboVNC-specific #ifdefs. Fix afore-mentioned tightQualityLevel bug. libvncserver/tight.c: Replaced the TightVNC encoder with the TurboVNC encoder. Relative to the initial TurboVNC encoder patch, this patch also: -- Adds TightPng support to the TurboVNC encoder -- Adds the afore-mentioned low-bandwidth mode, which is mapped externally to Compression Level 9 test/*: Included TJUnitTest (a regression test for the TurboJPEG wrapper) as well as TJBench (a benchmark for same.) These are useful for ensuring that the wrapper still functions correctly and performantly if it needs to be modified for whatever reason. Both of these programs are derived from libjpeg-turbo 1.2.0. As with the TurboJPEG wrapper, they do not contain the more advanced features of TurboJPEG 1.2, such as YUV encoding/decoding and lossless transforms.
13 years ago
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
cl->turboQualityLevel = tight2turbo_qual[enc & 0x0F];
cl->turboSubsampLevel = tight2turbo_subsamp[enc & 0x0F];
rfbLog("Using JPEG subsampling %d, Q%d for client %s\n",
cl->turboSubsampLevel, cl->turboQualityLevel, cl->host);
} else if ( enc >= (uint32_t)rfbEncodingFineQualityLevel0 + 1 &&
enc <= (uint32_t)rfbEncodingFineQualityLevel100 ) {
cl->turboQualityLevel = enc & 0xFF;
rfbLog("Using fine quality level %d for client %s\n",
cl->turboQualityLevel, cl->host);
} else if ( enc >= (uint32_t)rfbEncodingSubsamp1X &&
enc <= (uint32_t)rfbEncodingSubsampGray ) {
cl->turboSubsampLevel = enc & 0xFF;
rfbLog("Using subsampling level %d for client %s\n",
cl->turboSubsampLevel, cl->host);
Add TurboVNC encoding support. TurboVNC is a variant of TightVNC that uses the same client/server protocol (RFB version 3.8t), and thus it is fully cross-compatible with TightVNC and TigerVNC (with one exception, which is noted below.) Both the TightVNC and TurboVNC encoders analyze each rectangle, pick out regions of solid color to send separately, and send the remaining subrectangles using mono, indexed color, JPEG, or raw encoding, depending on the number of colors in the subrectangle. However, TurboVNC uses a fundamentally different selection algorithm to determine the appropriate subencoding to use for each subrectangle. Thus, while it sends a protocol stream that can be decoded by any TightVNC-compatible viewer, the mix of subencoding types in this protocol stream will be different from those generated by a TightVNC server. The research that led to TurboVNC is described in the following report: http://www.virtualgl.org/pmwiki/uploads/About/tighttoturbo.pdf. In summary: 20 RFB captures, representing "common" 2D and 3D application workloads (the 3D workloads were run using VirtualGL), were studied using the TightVNC encoder in isolation. Some of the analysis features in the TightVNC encoder, such as smoothness detection, were found to generate a lot of CPU usage with little or no benefit in compression, so those features were disabled. JPEG encoding was accelerated using libjpeg-turbo (which achieves a 2-4x speedup over plain libjpeg on modern x86 or ARM processors.) Finally, the "palette threshold" (minimum number of colors that the subrectangle must have before it is compressed using JPEG or raw) was adjusted to account for the fact that JPEG encoding is now quite a bit faster (meaning that we can now use it more without a CPU penalty.) TurboVNC has additional optimizations, such as the ability to count colors and encode JPEG images directly from the framebuffer without first translating the pixels into RGB. The TurboVNC encoder compares quite favorably in terms of compression ratio with TightVNC and generally encodes a great deal faster (often an order of magnitude or more.) The version of the TurboVNC encoder included in this patch is roughly equivalent to the one found in version 0.6 of the Unix TurboVNC Server, with a few minor patches integrated from TurboVNC 1.1. TurboVNC 1.0 added multi-threading capabilities, which can be added in later if desired (at the expense of making libvncserver depend on libpthread.) Because TurboVNC uses a fundamentally different mix of subencodings than TightVNC, because it uses the identical protocol (and thus a viewer really has no idea whether it's talking to a TightVNC or TurboVNC server), and because it doesn't support rfbTightPng (and in fact conflicts with it-- see below), the TurboVNC and TightVNC encoders cannot be enabled simultaneously. Compatibility: In *most* cases, a TurboVNC-enabled viewer is fully compatible with a TightVNC server, and vice versa. TurboVNC supports pseudo-encodings for specifying a fine-grained (1-100) quality scale and specifying chrominance subsampling. If a TurboVNC viewer sends those to a TightVNC server, then the TightVNC server ignores them, so the TurboVNC viewer also sends the quality on a 0-9 scale that the TightVNC server can understand. Similarly, the TurboVNC server checks first for fine-grained quality and subsampling pseudo-encodings from the viewer, and failing to receive those, it then checks for the TightVNC 0-9 quality pseudo-encoding. There is one case in which the two systems are not compatible, and that is when a TightVNC or TigerVNC viewer requests compression level 0 without JPEG from a TurboVNC server. For performance reasons, this causes the TurboVNC server to send images directly to the viewer, bypassing Zlib. When the TurboVNC server does this, it also sets bits 7-4 in the compression control byte to rfbTightNoZlib (0x0A), which is unfortunately the same value as rfbTightPng. Older TightVNC viewers that don't handle PNG will assume that the stream is uncompressed but still encapsulated in a Zlib structure, whereas newer PNG-supporting TightVNC viewers will assume that the stream is PNG. In either case, the viewer will probably crash. Since most VNC viewers don't expose compression level 0 in the GUI, this is a relatively rare situation. Description of changes: configure.ac -- Added support for libjpeg-turbo. If passed an argument of --with-turbovnc, configure will now run (or, if cross-compiling, just link) a test program that determines whether the libjpeg library being used is libjpeg-turbo. libjpeg-turbo must be used when building the TurboVNC encoder, because the TurboVNC encoder relies on the libjpeg-turbo colorspace extensions in order to compress images directly out of the framebuffer (which may be, for instance, BGRA rather than RGB.) libjpeg-turbo can optionally be used with the TightVNC encoder as well, but the speedup will only be marginal (the report linked above explains why in more detail, but basically it's because of Amdahl's Law. The TightVNC encoder was designed with the assumption that JPEG had a very high CPU cost, and thus JPEG is used only sparingly.) -- Added a new configure variable, JPEG_LDFLAGS. This is necessitated by the fact that libjpeg-turbo often distributes libjpeg.a and libjpeg.so in /opt/libjpeg-turbo/lib32 or /opt/libjpeg-turbo/lib64, and many people prefer to statically link with it. Thus, more flexibility is needed than is provided by --with-jpeg. If JPEG_LDFLAGS is specified, then it overrides the changes to LDFLAGS enacted by --with-jpeg (but --with-jpeg is still used to set the include path.) The addition of JPEG_LDFLAGS necessitated replacing AC_CHECK_LIB with AC_LINK_IFELSE (because AC_CHECK_LIB automatically sets LIBS to -ljpeg, which is not what we want if we're, for instance, linking statically with libjpeg-turbo.) -- configure does not check for PNG support if TurboVNC encoding is enabled. This prevents the rfbSendRectEncodingTightPng() function from being compiled in, since the TurboVNC encoder doesn't (and can't) support it. common/turbojpeg.c, common/turbojpeg.h -- TurboJPEG is a simple API used to compress and decompress JPEG images in memory. It was originally implemented because it was desirable to use different types of underlying technologies to compress JPEG on different platforms (mediaLib on SPARC, Quicktime on PPC Macs, Intel Performance Primitives, etc.) These days, however, libjpeg-turbo is the only underlying technology used by TurboVNC, so TurboJPEG's purpose is largely just code simplicity and flexibility. Thus, since there is no real need for libvncserver to use any technology other than libjpeg-turbo for compressing JPEG, the TurboJPEG wrapper for libjpeg-turbo has been included in-tree so that libvncserver can be directly linked with libjpeg-turbo. This is convenient because many modern Linux distros (Fedora, Ubuntu, etc.) now ship libjpeg-turbo as their default libjpeg library. libvncserver/rfbserver.c -- Added logic to check for the TurboVNC fine-grained quality level and subsampling encodings and to map Tight (0-9) quality levels to appropriate fine-grained quality level and subsampling values if communicating with a TightVNC/TigerVNC viewer. libvncserver/turbo.c -- TurboVNC encoder (compiled instead of libvncserver/tight.c) rfb/rfb.h -- Added support for the TurboVNC subsampling level rfb/rfbproto.h -- Added constants for the TurboVNC fine quality level and subsampling encodings as well as the rfbTightNoZlib constant and notes on its usage.
13 years ago
#endif
24 years ago
} else
#endif
{
rfbExtensionData* e;
for(e = cl->extensions; e;) {
rfbExtensionData* next = e->next;
if(e->extension->enablePseudoEncoding &&
e->extension->enablePseudoEncoding(cl,
&e->data, (int)enc))
/* ext handles this encoding */
break;
e = next;
}
if(e == NULL) {
rfbBool handled = FALSE;
/* if the pseudo encoding is not handled by the
enabled extensions, search through all
extensions. */
rfbProtocolExtension* e;
for(e = rfbGetExtensionIterator(); e;) {
int* encs = e->pseudoEncodings;
while(encs && *encs!=0) {
if(*encs==(int)enc) {
void* data = NULL;
if(!e->enablePseudoEncoding(cl, &data, (int)enc)) {
rfbLog("Installed extension pretends to handle pseudo encoding 0x%x, but does not!\n",(int)enc);
} else {
rfbEnableExtension(cl, e, data);
handled = TRUE;
e = NULL;
break;
}
}
encs++;
}
if(e)
e = e->next;
}
rfbReleaseExtensionIterator();
if(!handled)
rfbLog("rfbProcessClientNormalMessage: "
"ignoring unsupported encoding type %s\n",
encodingName(enc,encBuf,sizeof(encBuf)));
}
}
24 years ago
}
}
24 years ago
if (cl->preferredEncoding == -1) {
if (lastPreferredEncoding==-1) {
cl->preferredEncoding = rfbEncodingRaw;
rfbLog("Defaulting to %s encoding for client %s\n", encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)),cl->host);
}
else {
cl->preferredEncoding = lastPreferredEncoding;
rfbLog("Sticking with %s encoding for client %s\n", encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)),cl->host);
}
24 years ago
}
else
{
if (lastPreferredEncoding==-1) {
rfbLog("Using %s encoding for client %s\n", encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)),cl->host);
} else {
rfbLog("Switching from %s to %s Encoding for client %s\n",
encodingName(lastPreferredEncoding,encBuf2,sizeof(encBuf2)),
encodingName(cl->preferredEncoding,encBuf,sizeof(encBuf)), cl->host);
}
}
if (cl->enableCursorPosUpdates && !cl->enableCursorShapeUpdates) {
rfbLog("Disabling cursor position updates for client %s\n",
cl->host);
cl->enableCursorPosUpdates = FALSE;
}
24 years ago
return;
}
case rfbFramebufferUpdateRequest:
{
sraRegionPtr tmpRegion;
24 years ago
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
24 years ago
sz_rfbFramebufferUpdateRequestMsg-1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbFramebufferUpdateRequestMsg,sz_rfbFramebufferUpdateRequestMsg);
/* The values come in based on the scaled screen, we need to convert them to
* values based on the main screen's coordinate system
*/
if(!rectSwapIfLEAndClip(&msg.fur.x,&msg.fur.y,&msg.fur.w,&msg.fur.h,cl))
{
rfbLog("Warning, ignoring rfbFramebufferUpdateRequest: %dXx%dY-%dWx%dH\n",msg.fur.x, msg.fur.y, msg.fur.w, msg.fur.h);
return;
}
tmpRegion =
sraRgnCreateRect(msg.fur.x,
msg.fur.y,
msg.fur.x+msg.fur.w,
msg.fur.y+msg.fur.h);
24 years ago
LOCK(cl->updateMutex);
sraRgnOr(cl->requestedRegion,tmpRegion);
24 years ago
if (!cl->readyForSetColourMapEntries) {
/* client hasn't sent a SetPixelFormat so is using server's */
cl->readyForSetColourMapEntries = TRUE;
if (!cl->format.trueColour) {
if (!rfbSetClientColourMap(cl, 0, 0)) {
sraRgnDestroy(tmpRegion);
TSIGNAL(cl->updateCond);
UNLOCK(cl->updateMutex);
24 years ago
return;
}
}
}
if (!msg.fur.incremental) {
sraRgnOr(cl->modifiedRegion,tmpRegion);
sraRgnSubtract(cl->copyRegion,tmpRegion);
}
TSIGNAL(cl->updateCond);
UNLOCK(cl->updateMutex);
sraRgnDestroy(tmpRegion);
24 years ago
return;
24 years ago
}
case rfbKeyEvent:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbKeyEventMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbKeyEventMsg, sz_rfbKeyEventMsg);
if(!cl->viewOnly) {
cl->screen->kbdAddEvent(msg.ke.down, (rfbKeySym)Swap32IfLE(msg.ke.key), cl);
}
24 years ago
return;
case rfbPointerEvent:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbPointerEventMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
24 years ago
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbPointerEventMsg, sz_rfbPointerEventMsg);
if (cl->screen->pointerClient && cl->screen->pointerClient != cl)
return;
24 years ago
if (msg.pe.buttonMask == 0)
cl->screen->pointerClient = NULL;
else
cl->screen->pointerClient = cl;
if(!cl->viewOnly) {
if (msg.pe.buttonMask != cl->lastPtrButtons ||
cl->screen->deferPtrUpdateTime == 0) {
cl->screen->ptrAddEvent(msg.pe.buttonMask,
ScaleX(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.x)),
ScaleY(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.y)),
cl);
cl->lastPtrButtons = msg.pe.buttonMask;
} else {
cl->lastPtrX = ScaleX(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.x));
cl->lastPtrY = ScaleY(cl->scaledScreen, cl->screen, Swap16IfLE(msg.pe.y));
cl->lastPtrButtons = msg.pe.buttonMask;
}
}
return;
24 years ago
case rfbFileTransfer:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbFileTransferMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
msg.ft.size = Swap32IfLE(msg.ft.size);
msg.ft.length = Swap32IfLE(msg.ft.length);
/* record statistics in rfbProcessFileTransfer as length is filled with garbage when it is not valid */
rfbProcessFileTransfer(cl, msg.ft.contentType, msg.ft.contentParam, msg.ft.size, msg.ft.length);
return;
case rfbSetSW:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbSetSWMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
msg.sw.x = Swap16IfLE(msg.sw.x);
msg.sw.y = Swap16IfLE(msg.sw.y);
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetSWMsg, sz_rfbSetSWMsg);
/* msg.sw.status is not initialized in the ultraVNC viewer and contains random numbers (why???) */
rfbLog("Received a rfbSetSingleWindow(%d x, %d y)\n", msg.sw.x, msg.sw.y);
if (cl->screen->setSingleWindow!=NULL)
cl->screen->setSingleWindow(cl, msg.sw.x, msg.sw.y);
return;
case rfbSetServerInput:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbSetServerInputMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetServerInputMsg, sz_rfbSetServerInputMsg);
/* msg.sim.pad is not initialized in the ultraVNC viewer and contains random numbers (why???) */
/* msg.sim.pad = Swap16IfLE(msg.sim.pad); */
rfbLog("Received a rfbSetServerInput(%d status)\n", msg.sim.status);
if (cl->screen->setServerInput!=NULL)
cl->screen->setServerInput(cl, msg.sim.status);
return;
case rfbTextChat:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbTextChatMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
msg.tc.pad2 = Swap16IfLE(msg.tc.pad2);
msg.tc.length = Swap32IfLE(msg.tc.length);
switch (msg.tc.length) {
case rfbTextChatOpen:
case rfbTextChatClose:
case rfbTextChatFinished:
/* commands do not have text following */
/* Why couldn't they have used the pad byte??? */
str=NULL;
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbTextChatMsg, sz_rfbTextChatMsg);
break;
default:
if ((msg.tc.length>0) && (msg.tc.length<rfbTextMaxSize))
{
str = (char *)malloc(msg.tc.length);
if (str==NULL)
{
rfbLog("Unable to malloc %d bytes for a TextChat Message\n", msg.tc.length);
rfbCloseClient(cl);
return;
}
if ((n = rfbReadExact(cl, str, msg.tc.length)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
free(str);
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbTextChatMsg+msg.tc.length, sz_rfbTextChatMsg+msg.tc.length);
}
else
{
/* This should never happen */
rfbLog("client sent us a Text Message that is too big %d>%d\n", msg.tc.length, rfbTextMaxSize);
rfbCloseClient(cl);
return;
}
}
/* Note: length can be commands: rfbTextChatOpen, rfbTextChatClose, and rfbTextChatFinished
* at which point, the str is NULL (as it is not sent)
*/
if (cl->screen->setTextChat!=NULL)
cl->screen->setTextChat(cl, msg.tc.length, str);
free(str);
return;
24 years ago
case rfbClientCutText:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbClientCutTextMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
24 years ago
msg.cct.length = Swap32IfLE(msg.cct.length);
24 years ago
str = (char *)malloc(msg.cct.length);
24 years ago
if ((n = rfbReadExact(cl, str, msg.cct.length)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
free(str);
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbClientCutTextMsg+msg.cct.length, sz_rfbClientCutTextMsg+msg.cct.length);
if(!cl->viewOnly) {
cl->screen->setXCutText(str, msg.cct.length, cl);
}
free(str);
24 years ago
return;
case rfbPalmVNCSetScaleFactor:
cl->PalmVNC = TRUE;
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbSetScaleMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetScaleMsg, sz_rfbSetScaleMsg);
rfbLog("rfbSetScale(%d)\n", msg.ssc.scale);
rfbScalingSetup(cl,cl->screen->width/msg.ssc.scale, cl->screen->height/msg.ssc.scale);
rfbSendNewScaleSize(cl);
return;
case rfbSetScale:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbSetScaleMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbSetScaleMsg, sz_rfbSetScaleMsg);
rfbLog("rfbSetScale(%d)\n", msg.ssc.scale);
rfbScalingSetup(cl,cl->screen->width/msg.ssc.scale, cl->screen->height/msg.ssc.scale);
rfbSendNewScaleSize(cl);
return;
24 years ago
case rfbXvp:
if ((n = rfbReadExact(cl, ((char *)&msg) + 1,
sz_rfbXvpMsg - 1)) <= 0) {
if (n != 0)
rfbLogPerror("rfbProcessClientNormalMessage: read");
rfbCloseClient(cl);
return;
}
rfbStatRecordMessageRcvd(cl, msg.type, sz_rfbXvpMsg, sz_rfbXvpMsg);
/* only version when is defined, so echo back a fail */
if(msg.xvp.version != 1) {
rfbSendXvp(cl, msg.xvp.version, rfbXvp_Fail);
}
else {
/* if the hook exists and fails, send a fail msg */
if(cl->screen->xvpHook && !cl->screen->xvpHook(cl, msg.xvp.version, msg.xvp.code))
rfbSendXvp(cl, 1, rfbXvp_Fail);
}
return;
24 years ago
default:
{
rfbExtensionData *e,*next;
for(e=cl->extensions; e;) {
next = e->next;
if(e->extension->handleMessage &&
e->extension->handleMessage(cl, e->data, &msg))
{
rfbStatRecordMessageRcvd(cl, msg.type, 0, 0); /* Extension should handle this */
return;
}
e = next;
}
24 years ago
rfbLog("rfbProcessClientNormalMessage: unknown message type %d\n",
msg.type);
rfbLog(" ... closing connection\n");
rfbCloseClient(cl);
return;
}
24 years ago
}
}
/*
* rfbSendFramebufferUpdate - send the currently pending framebuffer update to
* the RFB client.
* givenUpdateRegion is not changed.
24 years ago
*/
rfbBool
rfbSendFramebufferUpdate(rfbClientPtr cl,
sraRegionPtr givenUpdateRegion)
24 years ago
{
sraRectangleIterator* i=NULL;
sraRect rect;
24 years ago
int nUpdateRegionRects;
rfbFramebufferUpdateMsg *fu = (rfbFramebufferUpdateMsg *)cl->updateBuf;
sraRegionPtr updateRegion,updateCopyRegion,tmpRegion;
24 years ago
int dx, dy;
rfbBool sendCursorShape = FALSE;
rfbBool sendCursorPos = FALSE;
rfbBool sendKeyboardLedState = FALSE;
rfbBool sendSupportedMessages = FALSE;
rfbBool sendSupportedEncodings = FALSE;
rfbBool sendServerIdentity = FALSE;
rfbBool result = TRUE;
if(cl->screen->displayHook)
cl->screen->displayHook(cl);
/*
* If framebuffer size was changed and the client supports NewFBSize
* encoding, just send NewFBSize marker and return.
*/
if (cl->useNewFBSize && cl->newFBSizePending) {
LOCK(cl->updateMutex);
cl->newFBSizePending = FALSE;
UNLOCK(cl->updateMutex);
fu->type = rfbFramebufferUpdate;
fu->nRects = Swap16IfLE(1);
cl->ublen = sz_rfbFramebufferUpdateMsg;
if (!rfbSendNewFBSize(cl, cl->scaledScreen->width, cl->scaledScreen->height)) {
if(cl->screen->displayFinishedHook)
cl->screen->displayFinishedHook(cl, FALSE);
return FALSE;
}
result = rfbSendUpdateBuf(cl);
if(cl->screen->displayFinishedHook)
cl->screen->displayFinishedHook(cl, result);
return result;
}
24 years ago
/*
* If this client understands cursor shape updates, cursor should be
* removed from the framebuffer. Otherwise, make sure it's put up.
*/
if (cl->enableCursorShapeUpdates) {
if (cl->cursorWasChanged && cl->readyForSetColourMapEntries)
sendCursorShape = TRUE;
}
/*
* Do we plan to send cursor position update?
*/
if (cl->enableCursorPosUpdates && cl->cursorWasMoved)
sendCursorPos = TRUE;
/*
* Do we plan to send a keyboard state update?
*/
if ((cl->enableKeyboardLedState) &&
(cl->screen->getKeyboardLedStateHook!=NULL))
{
int x;
x=cl->screen->getKeyboardLedStateHook(cl->screen);
if (x!=cl->lastKeyboardLedState)
{
sendKeyboardLedState = TRUE;
cl->lastKeyboardLedState=x;
}
}
/*
* Do we plan to send a rfbEncodingSupportedMessages?
*/
if (cl->enableSupportedMessages)
{
sendSupportedMessages = TRUE;
/* We only send this message ONCE <per setEncodings message received>
* (We disable it here)
*/
cl->enableSupportedMessages = FALSE;
}
/*
* Do we plan to send a rfbEncodingSupportedEncodings?
*/
if (cl->enableSupportedEncodings)
{
sendSupportedEncodings = TRUE;
/* We only send this message ONCE <per setEncodings message received>
* (We disable it here)
*/
cl->enableSupportedEncodings = FALSE;
}
/*
* Do we plan to send a rfbEncodingServerIdentity?
*/
if (cl->enableServerIdentity)
{
sendServerIdentity = TRUE;
/* We only send this message ONCE <per setEncodings message received>
* (We disable it here)
*/
cl->enableServerIdentity = FALSE;
}
LOCK(cl->updateMutex);
24 years ago
/*
* The modifiedRegion may overlap the destination copyRegion. We remove
* any overlapping bits from the copyRegion (since they'd only be
* overwritten anyway).
*/
sraRgnSubtract(cl->copyRegion,cl->modifiedRegion);
24 years ago
/*
* The client is interested in the region requestedRegion. The region
* which should be updated now is the intersection of requestedRegion
* and the union of modifiedRegion and copyRegion. If it's empty then
* no update is needed.
*/
updateRegion = sraRgnCreateRgn(givenUpdateRegion);
if(cl->screen->progressiveSliceHeight>0) {
int height=cl->screen->progressiveSliceHeight,
y=cl->progressiveSliceY;
sraRegionPtr bbox=sraRgnBBox(updateRegion);
sraRect rect;
if(sraRgnPopRect(bbox,&rect,0)) {
sraRegionPtr slice;
if(y<rect.y1 || y>=rect.y2)
y=rect.y1;
slice=sraRgnCreateRect(0,y,cl->screen->width,y+height);
sraRgnAnd(updateRegion,slice);
sraRgnDestroy(slice);
}
sraRgnDestroy(bbox);
y+=height;
if(y>=cl->screen->height)
y=0;
cl->progressiveSliceY=y;
}
sraRgnOr(updateRegion,cl->copyRegion);
if(!sraRgnAnd(updateRegion,cl->requestedRegion) &&
sraRgnEmpty(updateRegion) &&
(cl->enableCursorShapeUpdates ||
(cl->cursorX == cl->screen->cursorX && cl->cursorY == cl->screen->cursorY)) &&
!sendCursorShape && !sendCursorPos && !sendKeyboardLedState &&
!sendSupportedMessages && !sendSupportedEncodings && !sendServerIdentity) {
sraRgnDestroy(updateRegion);
UNLOCK(cl->updateMutex);
if(cl->screen->displayFinishedHook)
cl->screen->displayFinishedHook(cl, TRUE);
return TRUE;
24 years ago
}
/*
* We assume that the client doesn't have any pixel data outside the
* requestedRegion. In other words, both the source and destination of a
* copy must lie within requestedRegion. So the region we can send as a
* copy is the intersection of the copyRegion with both the requestedRegion
* and the requestedRegion translated by the amount of the copy. We set
* updateCopyRegion to this.
*/
updateCopyRegion = sraRgnCreateRgn(cl->copyRegion);
sraRgnAnd(updateCopyRegion,cl->requestedRegion);
tmpRegion = sraRgnCreateRgn(cl->requestedRegion);
sraRgnOffset(tmpRegion,cl->copyDX,cl->copyDY);
sraRgnAnd(updateCopyRegion,tmpRegion);
sraRgnDestroy(tmpRegion);
24 years ago
dx = cl->copyDX;
dy = cl->copyDY;
/*
* Next we remove updateCopyRegion from updateRegion so that updateRegion
* is the part of this update which is sent as ordinary pixel data (i.e not
* a copy).
*/
sraRgnSubtract(updateRegion,updateCopyRegion);
24 years ago
/*
* Finally we leave modifiedRegion to be the remainder (if any) of parts of
* the screen which are modified but outside the requestedRegion. We also
* empty both the requestedRegion and the copyRegion - note that we never
* carry over a copyRegion for a future update.
*/
sraRgnOr(cl->modifiedRegion,cl->copyRegion);
sraRgnSubtract(cl->modifiedRegion,updateRegion);
sraRgnSubtract(cl->modifiedRegion,updateCopyRegion);
sraRgnMakeEmpty(cl->requestedRegion);
sraRgnMakeEmpty(cl->copyRegion);
cl->copyDX = 0;
cl->copyDY = 0;
24 years ago
UNLOCK(cl->updateMutex);
if (!cl->enableCursorShapeUpdates) {
if(cl->cursorX != cl->screen->cursorX || cl->cursorY != cl->screen->cursorY) {
rfbRedrawAfterHideCursor(cl,updateRegion);
LOCK(cl->screen->cursorMutex);
cl->cursorX = cl->screen->cursorX;
cl->cursorY = cl->screen->cursorY;
UNLOCK(cl->screen->cursorMutex);
rfbRedrawAfterHideCursor(cl,updateRegion);
}
rfbShowCursor(cl);
}
/*
24 years ago
* Now send the update.
*/
rfbStatRecordMessageSent(cl, rfbFramebufferUpdate, 0, 0);
24 years ago
if (cl->preferredEncoding == rfbEncodingCoRRE) {
nUpdateRegionRects = 0;
for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){
int x = rect.x1;
int y = rect.y1;
int w = rect.x2 - x;
int h = rect.y2 - y;
int rectsPerRow, rows;
/* We need to count the number of rects in the scaled screen */
if (cl->screen!=cl->scaledScreen)
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate");
rectsPerRow = (w-1)/cl->correMaxWidth+1;
rows = (h-1)/cl->correMaxHeight+1;
nUpdateRegionRects += rectsPerRow*rows;
24 years ago
}
sraRgnReleaseIterator(i); i=NULL;
} else if (cl->preferredEncoding == rfbEncodingUltra) {
nUpdateRegionRects = 0;
for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){
int x = rect.x1;
int y = rect.y1;
int w = rect.x2 - x;
int h = rect.y2 - y;
/* We need to count the number of rects in the scaled screen */
if (cl->screen!=cl->scaledScreen)
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate");
nUpdateRegionRects += (((h-1) / (ULTRA_MAX_SIZE( w ) / w)) + 1);
}
sraRgnReleaseIterator(i); i=NULL;
#ifdef LIBVNCSERVER_HAVE_LIBZ
24 years ago
} else if (cl->preferredEncoding == rfbEncodingZlib) {
nUpdateRegionRects = 0;
for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){
int x = rect.x1;
int y = rect.y1;
int w = rect.x2 - x;
int h = rect.y2 - y;
/* We need to count the number of rects in the scaled screen */
if (cl->screen!=cl->scaledScreen)
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate");
24 years ago
nUpdateRegionRects += (((h-1) / (ZLIB_MAX_SIZE( w ) / w)) + 1);
}
sraRgnReleaseIterator(i); i=NULL;
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
24 years ago
} else if (cl->preferredEncoding == rfbEncodingTight) {
nUpdateRegionRects = 0;
for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){
int x = rect.x1;
int y = rect.y1;
int w = rect.x2 - x;
int h = rect.y2 - y;
int n;
/* We need to count the number of rects in the scaled screen */
if (cl->screen!=cl->scaledScreen)
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate");
n = rfbNumCodedRectsTight(cl, x, y, w, h);
24 years ago
if (n == 0) {
nUpdateRegionRects = 0xFFFF;
break;
}
nUpdateRegionRects += n;
}
sraRgnReleaseIterator(i); i=NULL;
#endif
#endif
#if defined(LIBVNCSERVER_HAVE_LIBJPEG) && defined(LIBVNCSERVER_HAVE_LIBPNG)
} else if (cl->preferredEncoding == rfbEncodingTightPng) {
nUpdateRegionRects = 0;
for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){
int x = rect.x1;
int y = rect.y1;
int w = rect.x2 - x;
int h = rect.y2 - y;
int n;
/* We need to count the number of rects in the scaled screen */
if (cl->screen!=cl->scaledScreen)
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate");
n = rfbNumCodedRectsTight(cl, x, y, w, h);
if (n == 0) {
nUpdateRegionRects = 0xFFFF;
break;
}
nUpdateRegionRects += n;
}
sraRgnReleaseIterator(i); i=NULL;
#endif
24 years ago
} else {
nUpdateRegionRects = sraRgnCountRects(updateRegion);
24 years ago
}
fu->type = rfbFramebufferUpdate;
if (nUpdateRegionRects != 0xFFFF) {
if(cl->screen->maxRectsPerUpdate>0
/* CoRRE splits the screen into smaller squares */
&& cl->preferredEncoding != rfbEncodingCoRRE
/* Ultra encoding splits rectangles up into smaller chunks */
&& cl->preferredEncoding != rfbEncodingUltra
#ifdef LIBVNCSERVER_HAVE_LIBZ
/* Zlib encoding splits rectangles up into smaller chunks */
&& cl->preferredEncoding != rfbEncodingZlib
#ifdef LIBVNCSERVER_HAVE_LIBJPEG
/* Tight encoding counts the rectangles differently */
&& cl->preferredEncoding != rfbEncodingTight
#endif
#endif
#ifdef LIBVNCSERVER_HAVE_LIBPNG
/* Tight encoding counts the rectangles differently */
&& cl->preferredEncoding != rfbEncodingTightPng
#endif
&& nUpdateRegionRects>cl->screen->maxRectsPerUpdate) {
sraRegion* newUpdateRegion = sraRgnBBox(updateRegion);
sraRgnDestroy(updateRegion);
updateRegion = newUpdateRegion;
nUpdateRegionRects = sraRgnCountRects(updateRegion);
}
fu->nRects = Swap16IfLE((uint16_t)(sraRgnCountRects(updateCopyRegion) +
nUpdateRegionRects +
!!sendCursorShape + !!sendCursorPos + !!sendKeyboardLedState +
!!sendSupportedMessages + !!sendSupportedEncodings + !!sendServerIdentity));
24 years ago
} else {
fu->nRects = 0xFFFF;
}
cl->ublen = sz_rfbFramebufferUpdateMsg;
if (sendCursorShape) {
cl->cursorWasChanged = FALSE;
if (!rfbSendCursorShape(cl))
goto updateFailed;
24 years ago
}
if (sendCursorPos) {
cl->cursorWasMoved = FALSE;
if (!rfbSendCursorPos(cl))
goto updateFailed;
}
if (sendKeyboardLedState) {
if (!rfbSendKeyboardLedState(cl))
goto updateFailed;
}
if (sendSupportedMessages) {
if (!rfbSendSupportedMessages(cl))
goto updateFailed;
}
if (sendSupportedEncodings) {
if (!rfbSendSupportedEncodings(cl))
goto updateFailed;
}
if (sendServerIdentity) {
if (!rfbSendServerIdentity(cl))
goto updateFailed;
}
if (!sraRgnEmpty(updateCopyRegion)) {
if (!rfbSendCopyRegion(cl,updateCopyRegion,dx,dy))
goto updateFailed;
24 years ago
}
for(i = sraRgnGetIterator(updateRegion); sraRgnIteratorNext(i,&rect);){
int x = rect.x1;
int y = rect.y1;
int w = rect.x2 - x;
int h = rect.y2 - y;
24 years ago
/* We need to count the number of rects in the scaled screen */
if (cl->screen!=cl->scaledScreen)
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "rfbSendFramebufferUpdate");
24 years ago
switch (cl->preferredEncoding) {
case -1:
24 years ago
case rfbEncodingRaw:
if (!rfbSendRectEncodingRaw(cl, x, y, w, h))
goto updateFailed;
24 years ago
break;
case rfbEncodingRRE:
if (!rfbSendRectEncodingRRE(cl, x, y, w, h))
goto updateFailed;
24 years ago
break;
case rfbEncodingCoRRE:
if (!rfbSendRectEncodingCoRRE(cl, x, y, w, h))
goto updateFailed;
break;
24 years ago
case rfbEncodingHextile:
if (!rfbSendRectEncodingHextile(cl, x, y, w, h))
goto updateFailed;
24 years ago
break;
case rfbEncodingUltra:
if (!rfbSendRectEncodingUltra(cl, x, y, w, h))
goto updateFailed;
break;
#ifdef LIBVNCSERVER_HAVE_LIBZ
24 years ago
case rfbEncodingZlib:
if (!rfbSendRectEncodingZlib(cl, x, y, w, h))
goto updateFailed;
24 years ago
break;
case rfbEncodingZRLE:
case rfbEncodingZYWRLE:
if (!rfbSendRectEncodingZRLE(cl, x, y, w, h))
goto updateFailed;
break;
#endif
#if defined(LIBVNCSERVER_HAVE_LIBJPEG) && (defined(LIBVNCSERVER_HAVE_LIBZ) || defined(LIBVNCSERVER_HAVE_LIBPNG))
24 years ago
case rfbEncodingTight:
if (!rfbSendRectEncodingTight(cl, x, y, w, h))
goto updateFailed;
24 years ago
break;
#ifdef LIBVNCSERVER_HAVE_LIBPNG
case rfbEncodingTightPng:
if (!rfbSendRectEncodingTightPng(cl, x, y, w, h))
goto updateFailed;
break;
#endif
#endif
24 years ago
}
}
if (i) {
sraRgnReleaseIterator(i);
i = NULL;
}
24 years ago
if ( nUpdateRegionRects == 0xFFFF &&
!rfbSendLastRectMarker(cl) )
goto updateFailed;
24 years ago
if (!rfbSendUpdateBuf(cl)) {
updateFailed:
result = FALSE;
}
if (!cl->enableCursorShapeUpdates) {
rfbHideCursor(cl);
}
24 years ago
if(i)
sraRgnReleaseIterator(i);
sraRgnDestroy(updateRegion);
sraRgnDestroy(updateCopyRegion);
if(cl->screen->displayFinishedHook)
cl->screen->displayFinishedHook(cl, result);
return result;
24 years ago
}
/*
* Send the copy region as a string of CopyRect encoded rectangles.
* The only slightly tricky thing is that we should send the messages in
* the correct order so that an earlier CopyRect will not corrupt the source
* of a later one.
*/
rfbBool
rfbSendCopyRegion(rfbClientPtr cl,
sraRegionPtr reg,
int dx,
int dy)
24 years ago
{
int x, y, w, h;
rfbFramebufferUpdateRectHeader rect;
rfbCopyRect cr;
sraRectangleIterator* i;
sraRect rect1;
24 years ago
23 years ago
/* printf("copyrect: "); sraRgnPrint(reg); putchar('\n');fflush(stdout); */
i = sraRgnGetReverseIterator(reg,dx>0,dy>0);
24 years ago
/* correct for the scale of the screen */
dx = ScaleX(cl->screen, cl->scaledScreen, dx);
dy = ScaleX(cl->screen, cl->scaledScreen, dy);
while(sraRgnIteratorNext(i,&rect1)) {
x = rect1.x1;
y = rect1.y1;
w = rect1.x2 - x;
h = rect1.y2 - y;
24 years ago
/* correct for scaling (if necessary) */
rfbScaledCorrection(cl->screen, cl->scaledScreen, &x, &y, &w, &h, "copyrect");
rect.r.x = Swap16IfLE(x);
rect.r.y = Swap16IfLE(y);
rect.r.w = Swap16IfLE(w);
rect.r.h = Swap16IfLE(h);
rect.encoding = Swap32IfLE(rfbEncodingCopyRect);
24 years ago
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,
sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
24 years ago
cr.srcX = Swap16IfLE(x - dx);
cr.srcY = Swap16IfLE(y - dy);
memcpy(&cl->updateBuf[cl->ublen], (char *)&cr, sz_rfbCopyRect);
cl->ublen += sz_rfbCopyRect;
24 years ago
rfbStatRecordEncodingSent(cl, rfbEncodingCopyRect, sz_rfbFramebufferUpdateRectHeader + sz_rfbCopyRect,
w * h * (cl->scaledScreen->bitsPerPixel / 8));
24 years ago
}
sraRgnReleaseIterator(i);
24 years ago
return TRUE;
}
/*
* Send a given rectangle in raw encoding (rfbEncodingRaw).
*/
rfbBool
rfbSendRectEncodingRaw(rfbClientPtr cl,
int x,
int y,
int w,
int h)
24 years ago
{
rfbFramebufferUpdateRectHeader rect;
int nlines;
int bytesPerLine = w * (cl->format.bitsPerPixel / 8);
char *fbptr = (cl->scaledScreen->frameBuffer + (cl->scaledScreen->paddedWidthInBytes * y)
+ (x * (cl->scaledScreen->bitsPerPixel / 8)));
24 years ago
/* Flush the buffer to guarantee correct alignment for translateFn(). */
if (cl->ublen > 0) {
24 years ago
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
rect.r.x = Swap16IfLE(x);
rect.r.y = Swap16IfLE(y);
rect.r.w = Swap16IfLE(w);
rect.r.h = Swap16IfLE(h);
rect.encoding = Swap32IfLE(rfbEncodingRaw);
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
rfbStatRecordEncodingSent(cl, rfbEncodingRaw, sz_rfbFramebufferUpdateRectHeader + bytesPerLine * h,
sz_rfbFramebufferUpdateRectHeader + bytesPerLine * h);
24 years ago
nlines = (UPDATE_BUF_SIZE - cl->ublen) / bytesPerLine;
while (TRUE) {
if (nlines > h)
nlines = h;
(*cl->translateFn)(cl->translateLookupTable,
&(cl->screen->serverFormat),
24 years ago
&cl->format, fbptr, &cl->updateBuf[cl->ublen],
cl->scaledScreen->paddedWidthInBytes, w, nlines);
24 years ago
cl->ublen += nlines * bytesPerLine;
h -= nlines;
if (h == 0) /* rect fitted in buffer, do next one */
return TRUE;
/* buffer full - flush partial rect and do another nlines */
if (!rfbSendUpdateBuf(cl))
return FALSE;
fbptr += (cl->scaledScreen->paddedWidthInBytes * nlines);
24 years ago
nlines = (UPDATE_BUF_SIZE - cl->ublen) / bytesPerLine;
if (nlines == 0) {
22 years ago
rfbErr("rfbSendRectEncodingRaw: send buffer too small for %d "
24 years ago
"bytes per line\n", bytesPerLine);
rfbCloseClient(cl);
return FALSE;
}
}
}
/*
* Send an empty rectangle with encoding field set to value of
* rfbEncodingLastRect to notify client that this is the last
* rectangle in framebuffer update ("LastRect" extension of RFB
* protocol).
*/
rfbBool
rfbSendLastRectMarker(rfbClientPtr cl)
24 years ago
{
rfbFramebufferUpdateRectHeader rect;
if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
rect.encoding = Swap32IfLE(rfbEncodingLastRect);
rect.r.x = 0;
rect.r.y = 0;
rect.r.w = 0;
rect.r.h = 0;
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
rfbStatRecordEncodingSent(cl, rfbEncodingLastRect, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader);
24 years ago
return TRUE;
}
/*
* Send NewFBSize pseudo-rectangle. This tells the client to change
* its framebuffer size.
*/
rfbBool
rfbSendNewFBSize(rfbClientPtr cl,
int w,
int h)
{
rfbFramebufferUpdateRectHeader rect;
if (cl->ublen + sz_rfbFramebufferUpdateRectHeader > UPDATE_BUF_SIZE) {
if (!rfbSendUpdateBuf(cl))
return FALSE;
}
if (cl->PalmVNC==TRUE)
rfbLog("Sending rfbEncodingNewFBSize in response to a PalmVNC style framebuffer resize (%dx%d)\n", w, h);
else
rfbLog("Sending rfbEncodingNewFBSize for resize to (%dx%d)\n", w, h);
rect.encoding = Swap32IfLE(rfbEncodingNewFBSize);
rect.r.x = 0;
rect.r.y = 0;
rect.r.w = Swap16IfLE(w);
rect.r.h = Swap16IfLE(h);
memcpy(&cl->updateBuf[cl->ublen], (char *)&rect,
sz_rfbFramebufferUpdateRectHeader);
cl->ublen += sz_rfbFramebufferUpdateRectHeader;
rfbStatRecordEncodingSent(cl, rfbEncodingNewFBSize, sz_rfbFramebufferUpdateRectHeader, sz_rfbFramebufferUpdateRectHeader);
return TRUE;
}
24 years ago
/*
* Send the contents of cl->updateBuf. Returns 1 if successful, -1 if
* not (errno should be set).
*/
rfbBool
rfbSendUpdateBuf(rfbClientPtr cl)
24 years ago
{
if(cl->sock<0)
return FALSE;
if (rfbWriteExact(cl, cl->updateBuf, cl->ublen) < 0) {
24 years ago
rfbLogPerror("rfbSendUpdateBuf: write");
rfbCloseClient(cl);
return FALSE;
}
cl->ublen = 0;
return TRUE;
}
/*
* rfbSendSetColourMapEntries sends a SetColourMapEntries message to the
* client, using values from the currently installed colormap.
*/
rfbBool
rfbSendSetColourMapEntries(rfbClientPtr cl,
int firstColour,
int nColours)
24 years ago
{
char buf[sz_rfbSetColourMapEntriesMsg + 256 * 3 * 2];
char *wbuf = buf;
rfbSetColourMapEntriesMsg *scme;
uint16_t *rgb;
rfbColourMap* cm = &cl->screen->colourMap;
24 years ago
int i, len;
if (nColours > 256) {
/* some rare hardware has, e.g., 4096 colors cells: PseudoColor:12 */
wbuf = (char *) malloc(sz_rfbSetColourMapEntriesMsg + nColours * 3 * 2);
}
scme = (rfbSetColourMapEntriesMsg *)wbuf;
rgb = (uint16_t *)(&wbuf[sz_rfbSetColourMapEntriesMsg]);
24 years ago
scme->type = rfbSetColourMapEntries;
scme->firstColour = Swap16IfLE(firstColour);
scme->nColours = Swap16IfLE(nColours);
len = sz_rfbSetColourMapEntriesMsg;
for (i = 0; i < nColours; i++) {
if(i<(int)cm->count) {
if(cm->is16) {
rgb[i*3] = Swap16IfLE(cm->data.shorts[i*3]);
rgb[i*3+1] = Swap16IfLE(cm->data.shorts[i*3+1]);
rgb[i*3+2] = Swap16IfLE(cm->data.shorts[i*3+2]);
24 years ago
} else {
rgb[i*3] = Swap16IfLE((unsigned short)cm->data.bytes[i*3]);
rgb[i*3+1] = Swap16IfLE((unsigned short)cm->data.bytes[i*3+1]);
rgb[i*3+2] = Swap16IfLE((unsigned short)cm->data.bytes[i*3+2]);
24 years ago
}
}
24 years ago
}
len += nColours * 3 * 2;
LOCK(cl->sendMutex);
if (rfbWriteExact(cl, wbuf, len) < 0) {
24 years ago
rfbLogPerror("rfbSendSetColourMapEntries: write");
rfbCloseClient(cl);
if (wbuf != buf) free(wbuf);
UNLOCK(cl->sendMutex);
24 years ago
return FALSE;
}
UNLOCK(cl->sendMutex);
rfbStatRecordMessageSent(cl, rfbSetColourMapEntries, len, len);
if (wbuf != buf) free(wbuf);
24 years ago
return TRUE;
}
/*
* rfbSendBell sends a Bell message to all the clients.
*/
void
rfbSendBell(rfbScreenInfoPtr rfbScreen)
{
rfbClientIteratorPtr i;
rfbClientPtr cl;
24 years ago
rfbBellMsg b;
i = rfbGetClientIterator(rfbScreen);
while((cl=rfbClientIteratorNext(i))) {
24 years ago
b.type = rfbBell;
LOCK(cl->sendMutex);
if (rfbWriteExact(cl, (char *)&b, sz_rfbBellMsg) < 0) {
24 years ago
rfbLogPerror("rfbSendBell: write");
rfbCloseClient(cl);
}
UNLOCK(cl->sendMutex);
24 years ago
}
rfbStatRecordMessageSent(cl, rfbBell, sz_rfbBellMsg, sz_rfbBellMsg);
rfbReleaseClientIterator(i);
24 years ago
}
/*
* rfbSendServerCutText sends a ServerCutText message to all the clients.
*/
void
rfbSendServerCutText(rfbScreenInfoPtr rfbScreen,char *str, int len)
{
rfbClientPtr cl;
rfbServerCutTextMsg sct;
rfbClientIteratorPtr iterator;
iterator = rfbGetClientIterator(rfbScreen);
while ((cl = rfbClientIteratorNext(iterator)) != NULL) {
sct.type = rfbServerCutText;
sct.length = Swap32IfLE(len);
LOCK(cl->sendMutex);
if (rfbWriteExact(cl, (char *)&sct,
24 years ago
sz_rfbServerCutTextMsg) < 0) {
rfbLogPerror("rfbSendServerCutText: write");
rfbCloseClient(cl);
UNLOCK(cl->sendMutex);
24 years ago
continue;
}
if (rfbWriteExact(cl, str, len) < 0) {
24 years ago
rfbLogPerror("rfbSendServerCutText: write");
rfbCloseClient(cl);
}
UNLOCK(cl->sendMutex);
rfbStatRecordMessageSent(cl, rfbServerCutText, sz_rfbServerCutTextMsg+len, sz_rfbServerCutTextMsg+len);
24 years ago
}
rfbReleaseClientIterator(iterator);
}
/*****************************************************************************
*
* UDP can be used for keyboard and pointer events when the underlying
* network is highly reliable. This is really here to support ORL's
* videotile, whose TCP implementation doesn't like sending lots of small
* packets (such as 100s of pen readings per second!).
*/
static unsigned char ptrAcceleration = 50;
24 years ago
void
rfbNewUDPConnection(rfbScreenInfoPtr rfbScreen,
int sock)
24 years ago
{
if (write(sock, (char*) &ptrAcceleration, 1) < 0) {
24 years ago
rfbLogPerror("rfbNewUDPConnection: write");
}
}
/*
* Because UDP is a message based service, we can't read the first byte and
* then the rest of the packet separately like we do with TCP. We will always
* get a whole packet delivered in one go, so we ask read() for the maximum
* number of bytes we can possibly get.
*/
void
rfbProcessUDPInput(rfbScreenInfoPtr rfbScreen)
24 years ago
{
int n;
rfbClientPtr cl=rfbScreen->udpClient;
24 years ago
rfbClientToServerMsg msg;
if((!cl) || cl->onHold)
return;
if ((n = read(rfbScreen->udpSock, (char *)&msg, sizeof(msg))) <= 0) {
24 years ago
if (n < 0) {
rfbLogPerror("rfbProcessUDPInput: read");
}
rfbDisconnectUDPSock(rfbScreen);
24 years ago
return;
}
switch (msg.type) {
case rfbKeyEvent:
if (n != sz_rfbKeyEventMsg) {
22 years ago
rfbErr("rfbProcessUDPInput: key event incorrect length\n");
rfbDisconnectUDPSock(rfbScreen);
24 years ago
return;
}
cl->screen->kbdAddEvent(msg.ke.down, (rfbKeySym)Swap32IfLE(msg.ke.key), cl);
24 years ago
break;
case rfbPointerEvent:
if (n != sz_rfbPointerEventMsg) {
22 years ago
rfbErr("rfbProcessUDPInput: ptr event incorrect length\n");
rfbDisconnectUDPSock(rfbScreen);
24 years ago
return;
}
cl->screen->ptrAddEvent(msg.pe.buttonMask,
Swap16IfLE(msg.pe.x), Swap16IfLE(msg.pe.y), cl);
break;
default:
22 years ago
rfbErr("rfbProcessUDPInput: unknown message type %d\n",
24 years ago
msg.type);
rfbDisconnectUDPSock(rfbScreen);
24 years ago
}
}