-------------------------------------------- - Documentation version: 1.90.0 - Documentation date: 2008-03-06 - Parsing date: Thu Mar 6 22:31:20 UTC 2008 -------------------------------------------- This file contains the Krusader FAQ This file is parsed from Docbook/XML source files with the 'make_doc' script (krusader-handbook-1.80.0.source.tar.gz ). Note: ----- after the parsing process to generate this TXT file all te URL's are gone, to see the URL's again please take a look at the HTML version of this file. Feedback: --------- Feedback for the documentation is always welcome. Frank Schoolmeesters, documentation coordinator [frank_schoolmeesters {*} yahoo {.} com] Latest version: --------------- The latest version of this document is available online at: http://krusader.sourceforge.net/handbook/faq.html Latest version of the Krusader documentation should always be available: - online reading (Krusader-CVS): http://krusader.sourceforge.net/handbook/index.html - most recent documentation tarball http://sourceforge.net/project/showfiles.php?group_id=6488&package_id=125990 - when downloading and installing the most recent Krusader from the CVS repository (the doc's will be available via the Help menu) http://krusader.sourceforge.net/cvs.php http://krusader.sourceforge.net/handbook/installation.html as always, enjoy Krusader Krew. http://krusader.sourceforge.net db dD d8888b. db db .d8888. .d8b. d8888b. d88888b d8888b. 88 ,8P' 88 `8D 88 88 88' YP d8' `8b 88 `8D 88' 88 `8D 88,8P 88oobY' 88 88 `8bo. 88ooo88 88 88 88ooooo 88oobY' 88`8b 88`8b 88 88 `Y8b. 88~~~88 88 88 88~~~~~ 88`8b 88 `88. 88 `88. 88b d88 db 8D 88 88 88 .8D 88. 88 `88. YP YD 88 YD ~Y8888P' `8888Y' YP YP Y8888D' Y88888P 88 YD ------------------------------------------------------------------------ Chapter 13. Frequently Asked Questions (FAQ) Table of Contents Installation_FAQ Usage_FAQ General_FAQ If you have problems with Krusader please check the Installation_procedure, as your problem may be caused by a bad installation. The FAQ is divided into three sections: * Installation_FAQ (this page) * Usage_FAQ (issues with running/using Krusader) * General_FAQ (bug reports, forum, mailing list, ...) If you feel that a FAQ is missing or if something is not clear to you, please let_us_know. Installation FAQ 1. Does_Krusader_need_TDE_to_run? 2. Which_libraries_does_Krusader_need_to_run? 3. I_have_followed_all_the_steps_but_configurecomplains_about_missing_libs_or headers._What_do_I_need_to_do? 4. How_do_I_compile_Krusader_when_I'm_using_a_64_bit_processor_? 5. I_have_downloaded_the_Source_RPM_krusader-x.xx.dist.src.rpm,_what_to_do now? 6. I'm_trying_to_install_binary_foo_(RPM_or_DEB_package),_but_it_fails. What's_wrong? 7. I_can't_find_an_RPM_or_DEB_package_for_Krusader,_what_to_do? 8. I've_installed_Krusader,_but_when_I_start,_only_the_"Help"_menu_appears. Why? 9. Some_new_menu_items_are_missing_after_updating_Krusader,_what's_wrong? 10. When_I_run_make,_it_complains_about_libfam.la,_what's_wrong? 11. Debian_complains_about_Qt_when_running_./configure,_what's_wrong? 12. I_have_a_libGLcore.so.1_compile_error_after_using_the_NVIDIA_installer, what_to_do? 13. Why_Krusader-1.60.x_does_not_compile_with_gcc4? 14. I_am_having_trouble_compiling_and_installing_Krusader,_how_do_I_send_a help_request? 15. How_can_I_build_an_RPM_package_for_Krusader? 16. Why_does_Krusader-cvs_show_an_old_version_number_in_the_about_box? 1. Does Krusader need TDE to run? No, Krusader does not need the TDE window manager to run on your computer but Krusader's natural environment is TDE, because it relies on services provided by the TDE base libraries. Only some shared libraries are needed e.g. TDE libraries, TQt™ libraries, etc. This means that Krusader runs on GNOME, AfterStep, XFce and other window managers provided the approriate libraries are installed on your computer. All this is not a problem since the apt-get world can resolve these dependencies instantly. You do not need to switch to the TDE window manager to use Krusader; you can still use GNOME, AfterStep, XFce or another window manager. However, the configuration of the Krusader fonts and some behavior is done by running kcontrol. A lot depends on what you want to do with Krusader. You should know that Krusader uses the TDE KIOSlaves to access remote file systems, and support for only a limited number of file system types are shipped with tdelibs, most of the KIOSlaves are bundled with tdebase (including fish, sftp and tar). However, if you want the property-dialog to show EXIF-data for .jpeg's, you need tdegraphics. If you want ID3-infos, you need tdemultimedia, and so on. To summarize, if you want a working Krusader - install tdelibs. If you want a functional Krusader then you need tdelibs + tdebase. For maximum functionality, Krusader needs all of the TDE package libraries, but the TDE window manager is optional. 2. Which libraries does Krusader need to run? For running Krusader (e.g. when you have installed Krusader with a binary RPM) you need less libraries than if you compile Krusader from source. e.g. you only need the C-compliler gcc when you compile Krusader from source (see the next question). Here is a list of the required shared libraries when you run Krusader: * tdelibs (for the required TDE version see the Installation_procedure) * libacl1 libart-2.0 libattr1 libaudio2 libc6 libfam0 libfontconfig1 * libfreetype6 libgcc1 libgcc2 libice6 libidn11 libjpeg62 libkjsembed1 * libkonq4 libpcre3 libpng12 libtqt3-mt libsm6 libstdc++6 libunwind7 libx11-6 * libxcursor1 libxext6 libxft2 libxi6 libxinerama1 libxrandr2 libxrender1 libxt6 zlib1g If you need more info please take a look at the requirements_on_Debian� . 3. I have followed all the steps but configurecomplains about missing libs or headers. What do I need to do? Install the missing packages. Here is a list of the required packages to compile Krusader from source: * gcc-cpp gcc-c++ glibc libgcc1 (other compilers may work but haven't been tested) * autoconf automake XFree * libtqt3 libtqt-devel * tdelibs tdelibs-devel * libjpeg62 libjpeg-devel libpng3 libmng1 * fam libfam-devel * zlib1 arts libart_lgpl2 libstdc++5 libpcre0 * libkjsembed, if you use the JavaScript_console, often found in a package called tdebindings(-devel) and libkonq-dev for the Konqueror right-click menu entries. Most RPM-based distributions separate the headers from the libs. The headers are needed to compile Krusader. Look for packages in the form foo- devel-*.rpm (e.g. tdelibs-devel-foo.i586.rpm) or foo-dev-*.deb for Debian� based distributions. These are usually included with your distribution. **** Tip **** If you ca not find the needed package, use rpmfind and click 'missing lib or header' in the search line. Or use apt-cache search foo to find the corresponding package for Debian� based distributions. 4. How do I compile Krusader when I'm using a 64 bit processor ? As far as we know, there are no issues. Krusader is also available on many other_architectures. 5. I have downloaded the Source RPM krusader-x.xx.dist.src.rpm, what to do now? 1. Check the ownership and the permissions on /usr/src/RPM/ and all recursive directories that your normal user can read-write-execute in these directories. 2. To produce the binary RPM for your computer, do this: $ rpm --rebuild krusader-x.xx.dist.src.rpm 3. If all dependencies are OK, a binary RPM krusader-x.xx.dist.rpm will be created at /usr/src/RPM/RPMS/i586 (replace i586 with your architecture). 4. Test the binary RPM for errors before installing: $ rpm -i --test krusader-x.xx.dist.rpm If the prompt returns without any message, then everything is OK. 5. Install the binary RPM as usual, for example: $ su -c 'rpm -Uvh krusader-x.xx.dist.rpm' You will be asked to enter your root password. 6. Now you can start Krusader. **** Tip **** For more information about RPM, visit rpm.org and read the RPM_Guide by Eric Foster-Johnson. 6. I'm trying to install binary foo (RPM or DEB package), but it fails. What's wrong? Since we only prepare (and use) the source, we have no way of knowing this. Did you test the binary RPM before installing? $ rpm -i --test krusader-x.xx.dist.rpm If the prompt returns without any message, then everything is OK. RPM's downloaded from our website are usually provided by Krusader users. Visit your distro website and search for an updated RPM. If the RPM is not OK, try to find another package at Linux� software archives such as freshmeat.net or KDE-APPS.org. If you still can't find the appropriate package for your Linux� distribution, we recommend searching for it with rpmfind or rpmpbone. In general, a package for an older version of your distrubution or even for another distribution might work on your computer (e.g. FC RPM's often work on Mdk and RH, and vice versa), but it is always the best that you install only RPM's that exactly match your distribution. If you can't find a package that matches your distribution version, architecture or distribution, then use a source RPM. When you use a source RPM, the Krusader sources will be built, on your computer, guaranteeing a suitable binary RPM for your specific distribution and architecture. In addition, this method results in maximum system speed, since the resulting binary is customized for your computer. Please read the previous question, it explains how to install a source RPM. The best solution is explained in the next question. 7. I can't find an RPM or DEB package for Krusader, what to do? Check if your distribution provides Krusader, if it doesn't then contact your distribution creator and ask them to include Krusader! Did you take a look at the URL's on the Installation_procedure page? If you have and found nothing, you can always compile Krusader from source. Even if you feel you haven't got the necessary skills, you will probably succeed in compiling Krusader: we provide a very detailed installation procedure. This HowTo enables newcomers to compile Krusader from source, even if they have never done a compilation from source before, just follow the instructions carefully. Feel free to post a help_request if you encounter problems. 8. I've installed Krusader, but when I start, only the "Help" menu appears. Why? In this case only the Help menu is visible and all other menu items like e.g. File and Select are missing. This is because some distributions put the krusaderui.rc file in the wrong directory. To solve the problem, just copy the krusaderui.rc file from the package krusader_trinity/krusader/ krusaderui.rc to $TDEDIR/share/apps/krusader/krusaderui.rc and ~/.trinity/ share/apps/krusader/krusaderui.rc and re-run Krusader. If you have compiled Krusader from sources this is often caused if the TDEDIR_-_TQTDIR environment variables are not correctly set. The result is that the krusaderui.rc file is installed in the wrong directory. Please read the following question, as well. 9. Some new menu items are missing after updating Krusader, what's wrong? The krusaderui.rc file is stored in $TDEDIR/share/apps/krusader/ krusaderui.rc. When you change the "Toolbar", TDE makes a copy of that file in the home directory at ~/.trinity/share/apps/krusader/krusaderui.rc. If Krusader was previously installed on your computer, and you install a newer Krusader version the ~/.trinity/share/apps/krusader/krusaderui.rc file must be replaced with the newer version. Note: this will also reset all your changes on toolbars and shortcuts! The first line of krusaderui.rc contains the version number. After installing a newer Krusader version, TDE will automatically replace the old ~/.trinity/share/apps/krusader/krusaderui.rc with the newer version when starting the new Krusader for the first time (TDE will detect the newer version number in the first line). If you install a CVS or beta version and Krusader was already installed on your computer then you should delete the krusaderui.rc file from your home directory to activate the new menu entries $ rm ~/.trinity/share/apps/krusader/ krusaderui.rc If the ~/.trinity/share/apps/krusader/krusaderui.rc file is older, then the new menu elements will not be shown. Read the previous question for information on how to update the krusaderui.rc file. If krusaderui.rc is missing or in a wrong directory, only the "Help" menu appears, please read the previous question. 10. When I run make, it complains about libfam.la, what's wrong? The ./configure script does not check for the presence of libfam.la, and make needs libfam.la to compile Krusader. If you know how this can be solved, please let us know. Install libfam0-devel-foo.rpm. Note: when you install Mandrake™-Linux� 9.2 with the default settings, this package is not installed. If you need more information take a look at FAQ_missing libs_or_headers. 11. Debian� complains about TQt™ when running ./configure, what's wrong? This problem occurs when you use gcc 2.95, you need to install gcc 3.2 (or higher). You also need to set the enviroment variables "CC, CPP and CXX" before running the ./configure script. $ export CC=/usr/bin/gcc-3.2 $ export CXX=/usr/bin/g++-3.2 $ export CPP=/usr/bin/cpp-3.2 For more information please take a look in_our_forum and at the instructions on how to build a TQt™/TDE application on Debian�. 12. I have a libGLcore.so.1 compile error after using the NVIDIA� installer, what to do? This problem occurs when you use the NVIDIA� installer and not the official NVIDIA� packages of your distribution. Krusader is based on TQt™ which can be linked against the X OpenGL libraries. As a result Krusader may look for OpenGL as well. The problem is that the NVIDIA� installer (prior to version 7xxx) doesn't perform it's task properly: it replaces the OpenGL header files (which get included into Krusader) but doesn't set the libGL links correctly. The best solution is to use the NVIDIA� packages provided by your distributor or a new NVIDIA� installer, the current version at the moment of writing is 7114. If, for some reason, you must use an old NVIDIA� driver, one solution is the following hack, the exact commands depend on the distribution used and the version of the NVIDIA� driver (6111 in this example), but it should read something like this: $ ln -s libGLcore.so.1.0.6111 libGLcore.so.0 $ ln -s libGLcore.so.1.0.6111 libGLcore.so $ ln -s libGLcore.so.1.0.6111 libGLcore.so.1.0.0 $ ln -s libGLcore.so.1.0.6111 libGLcore.so.0.0.0 $ ln -s libGLcore.so.1.0.6111 libGL.so $ ln -s libGLcore.so.1.0.6111 libGL.so.0 $ ln -s libGLcore.so.1.0.6111 libGL.so.0.0.0 $ ln -s libGLcore.so.1.0.6111 libGL.so.1 $ ln -s libGLcore.so.1.0.6111 libGL.so.1.0.0 $ ln -s /usr/lib/libGLU.la /usr/X11R6/lib/libGLU.la 13. Why Krusader-1.60.x does not compile with gcc4? Because Krusader-1.60.x was not gcc4 compatible, it first needs some patches: * add 'class ListPanelFunc;' in krusader/Panel/listpanel.h * add 'class KMountManGUI;' in krusader/MountMan/kmountman.h * add 'class KrDetailedViewItem;' in krusader/Panel/krdetailedview.h More information can be found in our forum. 14. I am having trouble compiling and installing Krusader, how do I send a help request? Please read our detailed installation_procedure and the FAQ. If you can't find a solution to your problem then feel free to post a help request at our Krusader forum or use the Krusader-users mailing list. But before posting a help request, please try the following: 1. Use the Search function on the Krusader_Forum, your problem might be solved or discussed already. 2. If you can't find a solution, please make a note of the following issues: * the Krusader version used * the Linux� distribution + version used * a good description of the problem Without this information, it is very difficult for us to help you. **** Note **** If you give us the error messages (e.g. make error messages) please start with the FIRST error message, all the error messages which follow the first error message are consequences and not the cause of your problem. 3. Send out your help request. Thank you for your co-operation! 15. How can I build an RPM package for Krusader? If you have experience with compiling from source, you will probably be able to build a Krusader RPM too. Information about RPM can be found at rpm.org and in the RPM_Guide by Eric Foster-Johnson. The following is the short procedure howto on building an RPM. **** Warning **** NEVER build RPMs when logged in as root. Mistakes in building packages (e.g. a bad krusader.spec file) can do serious damage to your system when logged in as root. 1. Compile Krusader from source to check that the compilation works fine. 2. Check the ownership and the permissions on /usr/src/RPM/ and all recursive directories that your normal user can read-write-execute in these directories. 3. Copy kusader-1.xx.tar.gz to /usr/scr/RPM/SOURCE 4. Copy kusader.spec to /usr/scr/RPM/SPECS Tip: the latest kusader.spec can be found in CVS. 5. Edit kusader.spec and add your name, your e-mail address, the rpm name, ... Other changes may be needed if rpmbuild fails. 6. Build the binary and the source RPM with: $ rpmbuild -ba /usr/scr/RPM/SPECS/krusader.spec If everything went OK you will have a binary RPM in /usr/src/RPM/ RPMS/i586 (depending on your architecture) and a source RPM in /usr/ src/RPM/SRPMS/ e.g. krusader-1.70-beta1.suse10.i586.rpm and krusader- 1.70-beta1.suse10.src.rpm 7. If the build is not OK you will receive an error message during the rpmbuild process, try to fix it and run rpmbuild again. 8. And finally: test the RPM before sending it in. 16. Why does Krusader-cvs show an old version number in the about box? Because we only change the version number just before we do a new release. Krusader-cvs will show an older version number, so ignore the version number and check the download date. We simply haven't yet decided what the next version number will be. Usage FAQ 1. Krusader_keeps_crashing,_why? 2. When_I_try_to_mount/unmount_my_cdrom/floppy,_Krusader_reports_something about_a_supermount,_what's_this_about? 3. Why_does_Krusader_freeze_or_hang_on_a_dead_mountpoint? 4. When_I_try_to_resize_Krusader_to_make_it_smaller,_I_discover_that_I_can't resize_it_below_a_certain_size._Why? 5. When_I_perform_some_file_operations,_Krusader's_panel_doesn't_refresh_/ I'm_using_Krusader_with_fam_installed,_but_updates_to_the_panel_are_not shown._Why? 6. Samba_ISO_8859-x_codepage_/_What_to_do_if_Krusader_does_not_read_shared directories_containing_special_international_characters? 7. Krusader_reports_"krarc:..._protocol_not_supported"_error_at_opening_an archive_file,_what_to_do? 8. I_get_the_error_message_"Protocol_not_supported_by_Krusader:_"krarc:/path/ to/foo-archive",_when_I_try_to_open_foo-Archive,_what_to_do? 9. What_todo_if_an_extenal_tool_doesn't_seem_to_work? 10. Howto_executing_jar_files_(and_not_enter_the_jar_archive)? 11. Why_do_I_have_trouble_with_my_FTP_connection? 12. I_get_"FTP_protocol_not_supported_by_Krusader"_error_when_trying_to_open a_remote_FTP_directory,_what_to_do? 13. How_don't_add_".part"_suffix_when_copying_files_via_ftp? 14. How_can_I_close_a_remote_connection_(e.g._a_FTP_connection)? 15. I_am_experiencing_problems_with_the_media://_protocol,_why? 16. How_can_I_disable_the_default_sounds,_e.g._when_I_do_a_delete_action_? 17. Where_is_RemoteMan,_the_remote_connection_manager_? 18. Why_doesn't_mimetype_magic_sometimes_work_inside_archives? 19. Where_is_Konfigurator,_do_i_need_to_install_the_TDE_Desktop_Enviroment_to use_it? 20. How_can_I_set_the_look_&_feel_of_2_different_users_to_be_the_same? 21. Why_doesn't_"save_last_location"_work? 22. Why_doesn't_the_handbook_work? 1. When I try to mount/unmount my cdrom/floppy, Krusader reports something about a supermount, what's this about? Supermount is a daemon which handles the mounting/unmounting of removable filesystems for you. Just insert a floppy, and do cd /mnt/floppysupermount will do the mount for you automatically and transparently. Usually this works fine. However, supermount misleads the system into thinking that the floppy/cdrom is mounted at all times! This creates some problems for Krusader, as it cannot really know when the floppy or CD has been removed because the system information is not correctly updated by supermount - is there really a floppy in the drive? Of course, this can be solved, but as for now, we don't consider it a priority. 2. Why does Krusader freeze or hang on a dead mountpoint? When Krusader is e.g. browsing an NFS share and the NFS server goes down, Krusader will freeze. This Krusader (and all other open internal viewers/ editors) freeze is fatal, and can only be corrected with the kill -9. We have no solution for this. This is an issue not confined to file managers, or even the Linux� OS! The problem is that you "hang" on the first access to the dead share - so there is no way around it, no check to avoid it, even ls will freeze. Just trying to read something - anything - is enough to get you stuck. The one and only way around this architectural problem is using a multi-threaded design - this way if we get stuck, we don't hang the entire application event loop, but we don't think that the time is right for adding threads, we are not sure that *all* the TDE systems out there are using TQt™-mt (the multi threaded version of the TQt™ library), and the Krusader Krew may not be the right people to address this major issue in any case; so currently this is just a bug we have to learn to live with. 3. When I try to resize Krusader to make it smaller, I discover that I can't resize it below a certain size. Why? See the F1, F2 (etc.) buttons? They are not allowing Krusader to downsize as they have a minimum size. Just disable them View->Show FN Keys Bar and you'll be able to resize Krusader to your liking. Since version 1.51 we have improved this greatly: when downsizing the buttons will look like 'F5 ..py'. When the button faces are too small to read a tooltip will give the complete text. The minimum width is 45 pixels for each button. 4. When I perform some file operations, Krusader's panel doesn't refresh / I'm using Krusader with fam installed, but updates to the panel are not shown. Why? The bad news is that we're not sure why, but it seems that fam (file alteration monitor) sometimes refuses to work. We are looking into this problem to make sure it is not our problem. We've tried the same source code on two different Gentoo installations: one worked, the other did not. The good news is that if you disable fam, Krusader will automatically revert to its internal update mechanism (which is less efficient, but works) without needing to recompile. You can disable fam with: $ su -c 'fam -l' Look at the manpages for more information about fam. 5. Samba ISO 8859-x codepage / What to do if Krusader does not read shared directories containing special international characters? Krusader does not handle (yet) Samba ISO 8859-x codepages, if you use a codepage different than 8859-1 you will have to do a manual configuration. Create or modify the file: ~/.smb/smb.conf [global] workgroup = MyWorkGroup (ex. WORKGROUP) client code page = MyCodePage (ex. 852) character set = MyCharSet (ex. ISO8859-2) Unfortunately kcontrol (KDE 3.1.1) fails to configure smb.conf properly, so this must be done manually with a text editor. 6. Krusader reports "krarc:... protocol not supported" error at opening an archive file, what to do? Install the krarc slave properly: Copy the tdeio_krarc.so, tdeio_krarc.la files into $TDEDIR/lib/trinity Copy the krarc.protocol file into $TDEDIR/share/services or the directory where the TDEIO slaves are placed in your Linux� distribution. 7. I get the error message "Protocol not supported by Krusader: "krarc:/path/ to/foo-archive", when I try to open foo-Archive, what to do? The icons, tdeio_slaves and documentation must be installed in the correct places in the TDE directory tree. The tdeio_krarc.* files must be in the same directory with the other TDEIO slaves. Try this: locate tdeio_tar.* and copy/ link the tdeio_krarc.* files to the same location. Don't forget to run # ldconfig on this directory when you're done. For more information click here. 8. What todo if an extenal tool doesn't seem to work? Krusader uses several programs as external_tools, and sometimes they appear not to work. Open a terminal and check if tool foo is installed. $ foo Check if tool foo is properly configured in the Konfigurator_Dependencies page. For Archiving tools: autodetect the archives again with the Auto Configure button in the Konfigurator_archive_page. Check the Konfigurator Protocol_page If it doesn't work, backup your ~/.trinity/share/config/ krusaderrc configuration file and remove it from this location, Restart Krusader, Krusader will now start the first start configuration wizard, follow these guidelines. 9. Howto executing jar files (and not enter the jar archive)? Go to the Konfigurator_Protocol_page and remove application/x-jar from the krarc node, Krusader should no longer enter the archive. Global file associations are handled by TDE and not by Krusader. To assosiate the jar extension: * Opens the TDE control center * TDE Components->File Associations * Enter jar as filename pattern * Add java as application 10. Why do I have trouble with my FTP connection? This problem often occurs when you are behind a firewall or proxy. Open TDE Control Center->Network->Preferences, "Enable Passive Mode (PASV)" has to be turned on or off, depending on it's current setting. Now try your FTP session again to see if it works. Also, make sure you have no other FTP sessions open (using web browsers, etc.), they can cause complications. More information can be found in Active_FTP_vs._Passive_FTP,_a_Definitive Explanation. 11. I get "FTP protocol not supported by Krusader" error when trying to open a remote FTP directory, what to do? The reason for this error is that 'FTP via HTTP proxy' feature is not yet supported by Krusader. This error may be caused by a misconfiguration of the proxy settings in Trinity Control Center. Modify the proxy settings to not use HTTP proxy and FTP will work. 12. How don't add ".part" suffix when copying files via ftp? When uploading files a .part suffix is added to the filename, once the upload is complete the filename is renamed automagically to remove the .part suffix. This works great but sometimes some ftp-servers don't allow a rename operation. You can solve this by unchecking the checkbox Mark partially uploaded files in the TDE control center. The checkbox is located at Internet and Network->Connection Preferences. 13. How can I close a remote connection (e.g. a FTP connection)? It's explained in the remote_connections_chapter. 14. I am experiencing problems with the media:// protocol, why? At the moment of writing the media:// protocol is instable, we need to wait until the TDE team corrects it, every other protocol works properly with Krusader, only media fails. More information regarding this issue is available in our_forum. 15. How can I disable the default sounds, e.g. when I do a delete action ? Those are the default TDE System sounds, and not related to Krusader. If you want to disable them globally open the Trinity Control Center (kcontrol): Trinity Control Center->Sound & Multimedia->System Notifications, Event Source: "TDE System Notifications" and uncheck sound items you don't like. 16. Where is RemoteMan, the remote connection manager ? RemoteMan has been replaced by our Bookmark Manager since Krusader 1.25- beta1. The Bookmark Manager handles local files and remote_URL's the same way. RemoteMan was left as a selection until Krusader-1.51 to allow an easier transition and give you a chance to move your Bookmarks. RemoteMan was disabled, as announced, in Krusader-1.60. URL transition procedure: 1. install Krusader-1.51 2. open the RemoteMan and connect to an FTP 3. once inside, bookmark the current location, select a name and save. 4. do this for all your connections, all the Bookmarks are now stored in krbookmarks.xml 5. install Krusader-1.60, it will use krbookmarks.xml or import it if needed. 17. Why doesn't mimetype magic sometimes work inside archives? When you enter an archive and press F3 to view a file that has no known extension, e.g. README, INSTALL etc.. And if the viewer opens in hex-mode instead of the usual mode, than you need to configure: Trinity Control Center- >TDE components->File Associations->Application->octet-stream, binary viewer needs to be removed. 18. Where is Konfigurator, do i need to install the Trinity Desktop Enviroment to use it? Konfigurator is Krusaders configuration module, when you have installed Krusader than you have also Konfigurator. For some reason some people think it's an other TDE application, but it is not, so you don't need to install the Trinity Desktop Enviroment to use Konfigurator. When runnig Krusader, use Settings->Configure Krusader, and it will start Konfigurator. Please read the manual, Krusader has many many configuration options, a lot of things can be customized to your needs with Konfigurator. 19. How can I set the look & feel of 2 different users to be the same? Presuming that the current setup is the good configuration, you can copy the configuration to the other user. # cp ~/.trinity/share/config/krusaderrc /home/foo_user/.trinity/share/config And when the other user is Root use: # cp ~/.trinity/share/config/krusaderrc /root/.trinity/share/config 20. Why doesn't "save last location" work? Unfortunately the 1.70.x version contains a bug. The tabs are not saved if a "Panels Save Settings=Tabs" item is present in the configuration files. The fix is easy: * open and edit ~/.trinity/share/config/krusaderrc * remove the "Panels Save Settings" item and it'll work with the feature in Konfigurator. More info can be found in our_forum. 21. Why doesn't the handbook work? This error will happen on Debian� (or Debian� based) distro with the krusader_1.51-1_i386.deb package. You will see the next error message if you try to open the handbook: "The requested help file could not be found. Check that you have installed the documentation." To fix it go to /usr/ share/doc/tde/HTML/en/krusader/, you will see the foo.docbook.gz files. Now, you need to extract all these files with root privileges ("File- >Unpack" with Krusader) to create foo.docbook files. Now the handbook will work. This error is fixed in the krusader_1.60.0-1_i386.deb package and higher versions. General FAQ 1. How_can_I_report_a_wish,_a_suggestion,_or_a_comment? 2. How_can_I_send_a_patch? 3. How_can_I_report_a_bug? 4. How_can_i_send_good_debug_or_crash_reports? 5. What_todo_if_the_TDEcrashhandler_sends_no_usefull_backtrace_information? 6. Does_Krusader_have_a_mailing_list? 7. Does_Krusader_provide_newsfeeds? 8. Does_Krusader_have_an_IRC_channel? 9. How_does_the_Krusader_forum_work? 10. How_can_I_translate_Krusader_into_my_native_language? 11. How_can_I_support_Krusader? 12. Is_there_a_Mac_OS_X_port? 13. Is_there_a_Windows_port? 14. Why_is_Konqueror_in_"midnight_commander_style"_not_an_OFM? 15. Why_should_I_use_an_OFM? 1. How can I report a wish, a suggestion, or a comment? An open source project's greatest strength is derived from getting user feedback. That is why we love to hear what you have to say. Your "gripes" are our instructions. After about 6 months, programmers can no longer see their own mistakes. It's natural. We want the ideas, qritiques, and feedback because we all want to make Krusader the best and most useful file manager available anywhere. The most convenient way to contact us is to use the Krusader_Forum, or the krusader-users mailing_lists. For information on what remains to be done look at the ToDo_Forum. Adding ToDo items into the ToDo_Forum is for developers only, but feel free to post to the New_Features_Discussion/ Requests_Forum for things that aren't on the ToDo_Forum, but should be. If you have a nice feature request, the Krusader Krew will add your request to the ToDo_Forum. We review and discuss every submission. For more information how the forum works click here. 2. How can I send a patch? It's not easy to write patch guidelines, but here are some. 1. Patches, new code or new features are always welcome! 2. Focus only on one problem at a time, so the developers can easily understand you, and commit your patch it works. 3. Preferrably, you can start a discussion with the developers on the krusader-devel mailing_lists or on the Krusader_Forum. Unfortunatly, we can't apply a patch if the patch is in conflict with the "general design" of the Krusader code (read for more instructions in this FAQ). Please send only one change request per mail, so that the discussion is easier to follow. The modifications should be committed step by step, checking each line. 4. Submit your patch files into our Patch_Tracker, so that all patch proposals stay organised and don't get lost, tar.gz archives or diffs are usually ok. Do not copy changes into a mail. Most mailers will change the white spaces, so that the diff will not apply or the code snipped does not diff. In the past, patch mails went lost or disorganized in many many mails, so please use the Patch_Tracker, thanks! 5. Use portable solutions, Krusader should run on: * All POSIX (Linux�/BSD/UNIX�-like OSes), Solaris™. * All BSD Platforms (FreeBSD�/NetBSD�/OpenBSD�/Mac� OS). * KDE 3.3- KDE 3.5 and even on GNOME with tdelibs (for krusader- 2.x KDE 4) . * GCC 2.95 - GCC 4.1 Architecture changes are made by the team only. 6. A final note: always keep in mind a patch might be rejected. Either it has side effects, which we could not fix or it contradicts with the idea behind the patched module. In this sense, a software project differs from, let's say a wiki: a software project has to have someone to make all the final decisions. Otherwise the software will not work. Furthermore: keep in mind that the examination of patches might take time, as we all have private lives. 3. How can I report a bug? Bugs?!?!? Well, ok.... We have an online Bug Tracking System. Using the online bug-tracker helps us have a clear and orderly way to know how many bugs are open, bug priority and follow-ups. It saves us from browsing through the entire Krusader forum, searching for yesterdays bug. Please use this system. Before reporting a bug, please read the following: 1. Use the Krusader_Forum's Search function , your bug might be already solved . Please DO NOT post new bugs to the Bug_Discussion_Forum (except if you are not sure that you have found a bug). We use it for bug discussions. 2. Check if the bug is already posted in the online_bug_list of the Bug Tracking System. 3. If you can't find this bug mentioned, please submit it into the bug tracker by clicking the Submit New button in the bug-tracker window. Please submit the following issues: the Krusader version used, the Linux� distribution + version used, processor type, and as good a description of the problem as you can manage. Thank you for your co-operation! **** Note **** If possible, try to do the same operation with Konqueror or another TDE application. If you encounter the same problem then it is possibly a KIOSlaves or TDE (tdelibs) bug, and not a Krusader bug. Krusader uses the TDE libraries and the KIOSlaves for many operations. In some cases you can encounter problems if your distribution is incorrectly configured, please test it first as explained above. **** Note **** If you've got bugs to report please use http://bugs.trinitydesktop.org, TDE's Bug Tracking System. 4. How can i send good debug or crash reports? Usually binary packages that are been used by your distribution do not contain debug information. Since we usually only develop and fix Krusader- cvs, compile Krusader-cvs in debugmode and install it, than check if the bug still exist. $ ./configure --enable-debug=full Install valgrind, a suite of tools for debugging and profiling Linux� programs. Run Valgrind/Krusader $ valgrind --tool=memcheck {foo_path}/krusader The valgrind tool will write to stdout, what really happens. If you could send these informations before the crash, it's almost sure, that we may fix or tell you what to do. 5. What todo if the TDEcrashhandler sends no usefull backtrace information? Usually binary packages that are been used by your distribution do not contain debug information. Since we usually only develop and fix Krusader- cvs, compile Krusader-cvs in debugmode and install it, than check if the bug still exist. $ ./configure --enable-debug=full If the TDEKrashhandler still doesn't provide usefull backtrace information, than sometimes a coredump will give better information. Run Krusader, with disabled crashhandler. $ krusader --nocrashhandler On a crash you will get a .core file, usually in your home directory. Run gdb, the GNU Project Debugger $ gdb -c corefile krusader Now type bt to get the backtrace and type q to quit gdb. Often the best debug results will be given when using the valgrint tool. 6. Does Krusader have a mailing list? Yes, currently we have 6 mailing_lists. No spam, no bother, just Krusader. Feel free to subscribe and unsubscribe. Tip. our mailing lists can be browsed online or read with a newsreader, so that you don't even need to subscribe to follow the action on the mailing lists. * Krusader-news is a very low volume list, used for newsletters and announcements of new versions or critical bugfixes. The news can also be read online at latest_news and in the News_and_Announcements_Forum which are basically the same but displayed in another format. * Krusader-devel is the developer mailing list (read-only). If you want to follow the development of Krusader on the cutting edge, this is the list to follow. * Krusader-users is the Krusader users mailing list. Here you can ask for help and talk with the Krusader users and developers. * Krusader-i18n is the translations mailing list. * Krusader-doc is the documentation mailing list. * Krusader-commits (read-only): when the Krusader Krew commits code into CVS, it will be reported in this mailing list. Want to keep track? Waiting for a certain feature/bugfix? Follow Krusader's development here. 7. Does Krusader provide newsfeeds? Yes, we do. Several newsfeeds in various formats are available. rss- filerelease_feed, rss-forumfeed, krusader-news_feed, krusader-devel_feed and even additional_feeds by gmane.org. krusader-users_feed, krusader-i18n feed, krusader-doc_feed. 8. Does Krusader have an IRC channel? Yes, we do. Feel free to talk to the Krusader Krew and fellow-users via freenode.org servers. The server is irc.freenode.org, the channel is #krusader. Everyone is welcome. 9. How does the Krusader forum work? In the spirit of freedom of speech, everything that is Krusader related can be discussed in our forum. It does not matter if you are a newcomer or an advanced user, everyone is welcome. An open source project's greatest strength is derived from getting user feedback. That is why we love to hear what you have to say. With your feedback we can make Krusader better and better; otherwise, we are not aware of issues and ideas you may have. But please remember the following, so that we can maintain some order in the chaos. If the Documentation, FAQ, Krusader_Forum and Krusader-devel (please use the search function ) can't help you, do not hesitate to post on our forum. The Krusader Krew or the Krusader community is always available to help you. Please use the Search function of the Krusader_Forum, your issue may have been previously discussed (this allows us to minimize the double/triple/... postings). If your issue has already been discussed in the past there is a great chance that you will have an instant solution to your problem. If the issue is currently being discussed, you can join in the discussion. Some questions are asked over and over again, that's why we have created this FAQ. This allows us to spend more time developing Krusader. The Krusader_Forum is split into seven sections: * News_and_Announcements_Forum: all the latest news. * NewsLetter_Forum: all newsletters. * Bug_Discussion_Forum: discussions about bugs, please DO NOT use the forum for bug_reports (except if you are unsure if you have found a bug). * New_Features_Discussion/Requests_Forum: discussions about new features for future Krusader versions. * ToDo_Forum here you will find the list of the planned features. Registered users will be able to VOTE and COMMENT on the TODO items. Here you get the chance to push your favourite features (+3) and still prefer certain features over others (+1), if you don't care about a feature just simply don't vote on that feature. Unregistered users may only browse the ToDo_Forum. The ToDo_ranking_system contains the results based on the votes. Adding_ToDo_items or removing ToDo items which have been implemented will be done by the Krusader Krew. * UserActions_Forum: discussions about UserActions. Posting your own User Actions is greatly appreciated. We plan to include the best ones in the next Krusader releases. * General_Discussion_Forum: everything that is Krusader related and doesn't belong in the other forums. Thank you for your co-operation! We provide RSS feeds for our forums. You don't have to check for new posts all the time, instead the news will come to you! To make use of them, simply point your RSS aggregator to here. 10. How can I translate Krusader into my native language? Please read the i18n_page. It's not difficult to translate! Most anyone can do it, it just takes some time. 11. How can I support Krusader? You can support Krusader in many different ways. Please send us feedback, bug_reports, patches, donations, translations, ... 12. Is there a Mac� OS X port? Yes, there is Mac� OS X port, but you will not have the all the power you would have on Linux�. Please read the Mac�_OS_X_port_section for more information. A recommended native file manager for Mac� OS is Disk_Order� (shareware). 13. Is there a Windows� port? No, but this might change in the future. Please help_us with this project, contributions are greatly appreciated. A recommended native file manager for Windows� is Total_Commander� (shareware). 14. Why is Konqueror in "midnight commander style" not an OFM? The two panels and a commandline are available, all the other stuff like OFM_features and the OFM interaction with the user is missing from this profile. 15. Why should I use an OFM? An Orthodox_File_Manager_(OFM) is much faster than a one panel filemanager and faster than the command line. If you would like to know how_Krusader feels, there is only one way to discover: install it on your computer and use it for a while. If you prefer to waste time and lose productivity, continue to use one panel filemanagers which are based on Windows� Explorer. Matej Urbančič has written a blogon why OFM is better than a one panel filemanager.