You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kpilot/po/zh_TW.po

6079 lines
196 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# translation of kpilot.po to Chinese Traditional
#
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2007.
msgid ""
msgstr ""
"Project-Id-Version: kpilot\n"
"POT-Creation-Date: 2020-09-30 21:51+0200\n"
"PO-Revision-Date: 2007-04-18 12:36+0800\n"
"Last-Translator: Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv "
"dot tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.11.4\n"
#. Instead of a literal translation, add your name to the end of the list (separated by a comma).
msgid ""
"_: NAME OF TRANSLATORS\n"
"Your names"
msgstr "Frank Weng (a.k.a. Franklin)"
#. Instead of a literal translation, add your email to the end of the list (separated by a comma).
msgid ""
"_: EMAIL OF TRANSLATORS\n"
"Your emails"
msgstr "franklin at goodhorse dot idv dot tw"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:50
#: conduits/malconduit/mal-factory.cpp:70
msgid "MAL Synchronization Conduit for KPilot"
msgstr "KPilot MAL 同步導管"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:52
#: conduits/malconduit/mal-factory.cpp:72
msgid "Synchronizes the content from MAL Servers like AvantGo to the Handheld"
msgstr "將 MAL 伺服器(如 AvantGo上的內容同步到掌上型裝置"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:56
#: conduits/abbrowserconduit/abbrowser-setup.cpp:54
#: conduits/knotes/knotes-factory.cpp:73 conduits/malconduit/mal-factory.cpp:76
#: conduits/memofileconduit/memofile-factory.cpp:69
#: conduits/notepadconduit/notepad-factory.cpp:73
#: conduits/null/null-factory.cpp:71 conduits/recordconduit/factory.cpp:72
#: conduits/sysinfoconduit/sysinfo-setup.cpp:101
#: conduits/timeconduit/time-setup.cpp:54
msgid "Primary Author"
msgstr "主要作者"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:58
#: conduits/malconduit/mal-factory.cpp:78
msgid "Author of libmal and the JPilot AvantGo conduit"
msgstr "libmal 與 JPilot AvantGo 導管的作者"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:60
#: conduits/malconduit/mal-factory.cpp:80
msgid "Author of syncmal"
msgstr "syncmal 的作者"
#: Documentation/ConduitProgrammingTutorial/mal-factory.cpp:62
#: conduits/malconduit/mal-factory.cpp:82
msgid "Authors of the malsync library (c) 1997-1999"
msgstr "malsync 函式庫 (c) 1997-1999 的作者"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:125
#: conduits/abbrowserconduit/abbrowser-setup.cpp:71
msgid "Addressbook"
msgstr "通訊錄"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:291
#: conduits/vcalconduit/vcal-conduitbase.cpp:298
msgid ""
"You chose to sync with the file \"%1\", which cannot be opened. Please make "
"sure to supply a valid file name in the conduit's configuration dialog. "
"Aborting the conduit."
msgstr ""
"您選擇與檔案 %1 同步,但是檔案無法開啟。請確定您在導管設定中所給的是正確的檔"
"名。將中止此導管。"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:327
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:328
msgid "Unable to initialize and load the addressbook for the sync."
msgstr "同步時無法初始化並載入通訊錄。"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:340
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:341
msgid "Unable to lock addressbook for writing. Can't sync!"
msgstr "寫入時無法鎖定通訊錄。無法同步!"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:396
msgid ""
"An error occurred while uploading \"%1\". You can try to upload the "
"temporary local file \"%2\" manually"
msgstr "上傳 %1 時發生錯誤。您可以試著手動上傳本地的暫存檔 %2。"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:518
msgid "Unable to open the addressbook databases on the handheld."
msgstr "無法開啟掌上型裝置上的通訊錄資料庫。"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:539
msgid "Unable to open the addressbook."
msgstr "無法開啟通訊錄。"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1526
msgid "Item on PC"
msgstr "PC 上的項目"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1527
#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:308
msgid "Handheld"
msgstr "掌上型裝置"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1528
msgid "Last sync"
msgstr "最後一次同步"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1549
msgid "Last name"
msgstr "姓"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1550
msgid "First name"
msgstr "名"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1551
msgid "Organization"
msgstr "組織"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1552
msgid "Title"
msgstr "標題"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1553
msgid "Note"
msgstr "附註"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1555
msgid "Custom 1"
msgstr "自訂 1"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1556
msgid "Custom 2"
msgstr "自訂 2"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1557
msgid "Custom 3"
msgstr "自訂 3"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1558
msgid "Custom 4"
msgstr "自訂 4"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1560
msgid "Work Phone"
msgstr "工作電話"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1561
msgid "Home Phone"
msgstr "住家電話"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1562
msgid "Mobile Phone"
msgstr "行動電話"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1563
msgid "Fax"
msgstr "傳真"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1564
msgid "Pager"
msgstr "呼叫器"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1565
msgid "Other"
msgstr "其他"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1566
msgid "Email"
msgstr "電子郵件地址"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1569
msgid "Address"
msgstr "地址"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1570
msgid "City"
msgstr "城市"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1571
msgid "Region"
msgstr "區域"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1572
msgid "Postal code"
msgstr "郵遞區號"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1573
msgid "Country"
msgstr "國家"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1587 kpilot/listCat.cpp:84
msgid "Category"
msgstr "類別"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1752
msgid ""
"The following address entry was changed, but does no longer exist on the "
"handheld. Please resolve this conflict:"
msgstr "底下的通訊錄項目已變更,但是掌上型裝置中已不存在。請先解決這個問題:"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1756
msgid ""
"The following address entry was changed, but does no longer exist on the PC. "
"Please resolve this conflict:"
msgstr "底下的通訊錄項目已變更,但是 PC 中已不存在。請先解決這個問題:"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1760
msgid ""
"The following address entry was changed on the handheld as well as on the PC "
"side. The changes could not be merged automatically, so please resolve the "
"conflict yourself:"
msgstr ""
"底下的通訊錄項目已同時在 PC 與掌上型裝置中變更,但是兩者的變更無法自動合併。"
"請先解決這個問題:"
#: conduits/abbrowserconduit/abbrowser-conduit.cpp:1762
msgid "Address conflict"
msgstr "通訊錄項目衝突"
#: conduits/abbrowserconduit/abbrowser-setup.cpp:48
msgid "Abbrowser Conduit for KPilot"
msgstr "KPilot 的 Abbrowser 導管"
#: conduits/abbrowserconduit/abbrowser-setup.cpp:50
msgid "Configures the Abbrowser Conduit for KPilot"
msgstr "設定 KPilot 的 Abbrowser 導管Abbrowser Conduit"
#: conduits/abbrowserconduit/abbrowser-setup.cpp:56
#: conduits/abbrowserconduit/abbrowser-setup.cpp:59
#: conduits/docconduit/doc-factory.cpp:68 conduits/popmail/setupDialog.cpp:74
#: conduits/vcalconduit/todo-setup.cpp:59 conduits/vcalconduit/todo-setup.cpp:63
#: conduits/vcalconduit/vcal-setup.cpp:50 conduits/vcalconduit/vcal-setup.cpp:54
#: kpilot/kpilot.cpp:1027 kpilot/pilotDaemon.cpp:1323
msgid "Maintainer"
msgstr "維護者"
#: conduits/abbrowserconduit/abbrowser-setup.cpp:61
#: conduits/knotes/knotes-factory.cpp:77
msgid "UI"
msgstr "使用者介面"
#: conduits/abbrowserconduit/resolutionDialog.cpp:162
msgid ""
"_: Entries in the resolution dialog. First the name of the field, then the "
"entry from the Handheld or PC after the colon\n"
"%1: %2"
msgstr "%1%2"
#: conduits/abbrowserconduit/resolutionDialog.cpp:164
msgid ""
"_: Denoting newlines in Address entries. No need to translate\n"
" | "
msgstr " | "
#: conduits/abbrowserconduit/resolutionDialog.cpp:214
#: conduits/abbrowserconduit/resolutionDialog.cpp:220
msgid "Delete entry"
msgstr "刪除項目"
#: conduits/docconduit/DOC-converter.cpp:198
msgid "Unable to open text file %1 for reading."
msgstr "無法開啟文字檔 %1 以讀取。"
#: conduits/docconduit/DOC-converter.cpp:383
msgid "Unable to open Database for writing"
msgstr "無法開啟資料庫以寫入"
#: conduits/docconduit/DOC-converter.cpp:440
#, c-format
msgid "Unable to open palm doc database %1"
msgstr "無法開啟 palm doc 資料庫 %1"
#: conduits/docconduit/DOC-converter.cpp:510
msgid "No filename set for the conversion"
msgstr "轉換時未設定檔案名稱"
#: conduits/docconduit/DOC-converter.cpp:515
msgid "Unable to open Database for reading"
msgstr "無法開啟資料庫以讀取"
#: conduits/docconduit/DOC-converter.cpp:523
#, c-format
msgid "Unable to read database header for database %1."
msgstr "無法讀取資料庫 %1 的資料庫標頭。"
#: conduits/docconduit/DOC-converter.cpp:543
#, c-format
msgid "Unable to open output file %1."
msgstr "無法開啟輸出檔 %1。"
#: conduits/docconduit/DOC-converter.cpp:558
msgid "Could not read text record #%1 from Database %2"
msgstr "無法從資料庫 %2 讀取文字紀錄 #%1"
#: conduits/docconduit/DOC-converter.cpp:577
msgid "Could not read bookmark record #%1 from Database %2"
msgstr "無法從資料庫 %2 讀取書籤紀錄 #%1"
#: conduits/docconduit/DOC-converter.cpp:594
msgid "Unable to open file %1 for the bookmarks of %2."
msgstr "無法為 %2 的書籤開啟檔案 %1。"
#: conduits/docconduit/doc-conduit.cpp:84
msgid "DOC"
msgstr "DOC"
#: conduits/docconduit/doc-conduit.cpp:272
msgid "Searching for texts and databases to synchronize"
msgstr "搜尋要同步的文字與資料庫"
#: conduits/docconduit/doc-conduit.cpp:332
msgid "Database created."
msgstr "資料庫已建立。"
#: conduits/docconduit/doc-conduit.cpp:380
msgid "Unable to install the locally created PalmDOC %1 to the handheld."
msgstr "無法安裝本地端建立的 PalmDOC %1 到掌上型裝置。"
#: conduits/docconduit/doc-conduit.cpp:383
msgid "Conversion of PalmDOC \"%1\" failed."
msgstr "轉換 PalmDOC %1 失敗。"
#: conduits/docconduit/doc-conduit.cpp:391
#, c-format
msgid "Unable to open or create the database %1."
msgstr "無法開啟或建立資料庫 %1。"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:147
#: conduits/docconduit/doc-conduit.cpp:625
#: conduits/docconduit/doc-setupdialog.ui:401
#, no-c-format
msgid "Conflict Resolution"
msgstr "解決衝突"
#: conduits/docconduit/doc-conduit.cpp:630
msgid "Sync aborted by user."
msgstr "使用者已取消同步。"
#: conduits/docconduit/doc-conduit.cpp:668
msgid "Synchronizing text \"%1\""
msgstr "同步文字 %1 中"
#: conduits/docconduit/doc-conflictdialog.cpp:53
msgid ""
"Here is a list of all text files and DOC databases the conduit found. The "
"conduit tried to determine the correct sync direction, but for databases in "
"bold red letters a conflict occurred (i.e. the text was changed both on the "
"desktop and on the handheld). For these databases please specify which "
"version is the current one."
msgstr ""
"這裡是導管所找到的所有文字檔與 DOC 資料庫的清單。導管曾經試著決定正確的同步方"
"向,但是以粗紅字母標出的資料庫中出現衝突(也就是文字內容在兩邊都做了變更)。"
"請指定這些發生衝突的資料庫,要以哪個版本為主。"
#: conduits/docconduit/doc-conflictdialog.cpp:57
msgid ""
"You can also change the sync direction for databases without a conflict."
msgstr "您也可以對未發生衝突的資料庫來改變同步的方向。"
#: conduits/docconduit/doc-conflictdialog.cpp:61
msgid "DOC Databases"
msgstr "DOC 資料庫"
#: conduits/docconduit/doc-conflictdialog.cpp:106
msgid "No Sync"
msgstr "未同步"
#: conduits/docconduit/doc-conflictdialog.cpp:107
msgid "Sync Handheld to PC"
msgstr "從掌上型裝置同步到 PC"
#: conduits/docconduit/doc-conflictdialog.cpp:108
msgid "Sync PC to Handheld"
msgstr "從 PC 同步到掌上型裝置"
#: conduits/docconduit/doc-conflictdialog.cpp:109
msgid "Delete Both Databases"
msgstr "刪除兩邊的資料庫"
#: conduits/docconduit/doc-conflictdialog.cpp:113
msgid "More Info..."
msgstr "更多資訊..."
#: conduits/docconduit/doc-conflictdialog.cpp:155
msgid "unchanged"
msgstr "未變更"
#: conduits/docconduit/doc-conflictdialog.cpp:156
msgid "new"
msgstr "新的"
#: conduits/docconduit/doc-conflictdialog.cpp:157
msgid "changed"
msgstr "已變更"
#: conduits/docconduit/doc-conflictdialog.cpp:158
msgid "only bookmarks changed"
msgstr "只變更書籤"
#: conduits/docconduit/doc-conflictdialog.cpp:159
msgid "deleted"
msgstr "已刪除"
#: conduits/docconduit/doc-conflictdialog.cpp:160
msgid "does not exist"
msgstr "不存在"
#: conduits/docconduit/doc-conflictdialog.cpp:161
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:207
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:404
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:405
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:406
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:407
msgid "unknown"
msgstr "未知"
#: conduits/docconduit/doc-conflictdialog.cpp:171
msgid ""
"Status of the database %1:\n"
"\n"
msgstr ""
"資料庫 %1 的狀態:\n"
"\n"
#: conduits/docconduit/doc-conflictdialog.cpp:172
msgid "Handheld: %1\n"
msgstr "掌上型裝置:%1\n"
#: conduits/docconduit/doc-conflictdialog.cpp:173
msgid "Desktop: %1\n"
msgstr "桌面:%1\n"
#: conduits/docconduit/doc-conflictdialog.cpp:175
msgid "Database information"
msgstr "資料庫資訊"
#: conduits/docconduit/doc-conflictdialog.h:60
msgid "Resolution Dialog"
msgstr ""
#: conduits/docconduit/doc-factory.cpp:63
msgid "Palm DOC Conduit for KPilot"
msgstr "KPilot 的 Palm DOC 導管"
#: conduits/docconduit/doc-factory.cpp:64
msgid "Configures the DOC Conduit for KPilot"
msgstr "設定 KPilot 的 Palm DOC 導管"
#: conduits/docconduit/doc-setup.cpp:64
msgid "Palm DOC"
msgstr "Palm DOC"
#: conduits/docconduit/kpalmdoc.cpp:42
msgid "KPalmDOC"
msgstr "KPalmDOC"
#: conduits/docconduit/kpalmdoc.cpp:45
msgid "Main Developer"
msgstr "主要開發者"
#: conduits/docconduit/kpalmdoc.cpp:47
msgid "Maintainer of KPilot"
msgstr "KPilot 維護者"
#: conduits/docconduit/kpalmdoc.cpp:54
msgid "PalmDOC Converter"
msgstr "PalmDOC 轉換器"
#: conduits/docconduit/kpalmdoc_dlg.cpp:178
#: conduits/docconduit/kpalmdoc_dlg.cpp:214
#: conduits/docconduit/kpalmdoc_dlg.cpp:327
#: conduits/docconduit/kpalmdoc_dlg.cpp:352
msgid ""
"<qt>You selected to sync folders, but gave a filename instead (<em>%1</em>)."
"<br>Use folder <em>%2</em> instead?</qt>"
msgstr ""
"<qt>您選擇要同步資料夾,但是給了一個檔案(<em>%1</em>)。<br> 要改用資料夾 "
"<em>%2</em> 嗎?</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:181
#: conduits/docconduit/kpalmdoc_dlg.cpp:217
#: conduits/docconduit/kpalmdoc_dlg.cpp:330
#: conduits/docconduit/kpalmdoc_dlg.cpp:356
msgid "Use Folder"
msgstr "使用資料夾"
#: conduits/docconduit/kpalmdoc_dlg.cpp:194
msgid ""
"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
"folder.</qt>"
msgstr ""
"<qt>掌上型裝置資料庫檔所使用的資料夾 <em>%1</em> 不是合法的資料夾。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:203
msgid ""
"<qt>The folder <em>%1</em> for the handheld database files is not a valid "
"directory.</qt>"
msgstr "<qt>掌上型裝置資料庫檔所使用的資料夾 <em>%1</em> 不是合法的目錄。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:231
msgid ""
"<qt>The folder <em>%1</em> for the text files could not be created.</qt>"
msgstr "<qt>無法建立文字檔使用的資料夾 <em>%1</em>。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:254
#: conduits/docconduit/kpalmdoc_dlg.cpp:392
msgid "The following texts were successfully converted:"
msgstr "底下的文字已成功轉換:"
#: conduits/docconduit/kpalmdoc_dlg.cpp:255
#: conduits/docconduit/kpalmdoc_dlg.cpp:393
msgid "Conversion Successful"
msgstr "轉換成功"
#: conduits/docconduit/kpalmdoc_dlg.cpp:259
#: conduits/docconduit/kpalmdoc_dlg.cpp:397
msgid "No text files were converted correctly"
msgstr "沒有正確轉換任何文字檔"
#: conduits/docconduit/kpalmdoc_dlg.cpp:269
#: conduits/docconduit/kpalmdoc_dlg.cpp:407
msgid "<qt>The file <em>%1</em> does not exist.</qt>"
msgstr "<qt>檔案 <em>%1</em> 不存在。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:285
#: conduits/docconduit/kpalmdoc_dlg.cpp:415
msgid "Conversion of file %1 successful."
msgstr "檔案 %1 轉換成功。"
#: conduits/docconduit/kpalmdoc_dlg.cpp:342
msgid ""
"<qt>The folder <em>%1</em> for the text files is not a valid folder.</qt>"
msgstr "<qt>文字檔使用的資料夾 <em>%1</em> 不是合法的資料夾。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:369
msgid ""
"<qt>The folder <em>%1</em> for the PalmDOC files could not be created.</qt>"
msgstr "<qt>無法建立 PalmDOC 檔使用的資料夾 <em>%1</em>。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:437
msgid "&Text folder:"
msgstr "文字資料夾(&T)"
#: conduits/docconduit/kpalmdoc_dlg.cpp:438
msgid "&PalmDOC folder:"
msgstr "PalmDOC 資料夾(&P)"
#: conduits/docconduit/kpalmdoc_dlg.cpp:442
#: conduits/docconduit/kpalmdoc_dlgbase.ui:66
#, no-c-format
msgid "&Text file:"
msgstr "文字檔(&T)"
#: conduits/docconduit/kpalmdoc_dlg.cpp:443
msgid "&DOC file:"
msgstr "DOC 檔案(&D)"
#: conduits/docconduit/kpalmdoc_dlg.cpp:458
msgid "<qt>The database file <em>%1</em> already exists. Overwrite it?</qt>"
msgstr "<qt>資料庫檔案 <em>%1</em> 已存在。要覆寫嗎?</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:459
#: conduits/docconduit/kpalmdoc_dlg.cpp:504 kpilot/addressWidget.cpp:698
#: kpilot/logWidget.cpp:343
msgid "Overwrite"
msgstr "覆寫"
#: conduits/docconduit/kpalmdoc_dlg.cpp:484
#: conduits/docconduit/kpalmdoc_dlg.cpp:520
msgid "<qt>Error while converting the text %1.</qt>"
msgstr "<qt>轉換文字 %1 時發生錯誤。</qt>"
#: conduits/docconduit/kpalmdoc_dlg.cpp:503
msgid "<qt>The text file <em>%1</em> already exists. Overwrite it?</qt>"
msgstr "<qt>文字檔案 <em>%1</em> 已存在。要覆寫嗎?</qt>"
#: conduits/knotes/knotes-action.cpp:232
msgid "Could not open MemoDB on the handheld."
msgstr "無法開啟掌上型裝置的備忘錄資料庫。"
#: conduits/knotes/knotes-action.cpp:272
#, c-format
msgid "Could not load the resource at: %1"
msgstr "無法載入在 %1 的資源。"
#: conduits/knotes/knotes-action.cpp:808
#, c-format
msgid ""
"_n: Added one new memo.\n"
"Added %n new memos."
msgstr "已新增 %n 個備忘。"
#: conduits/knotes/knotes-action.cpp:814
#, c-format
msgid ""
"_n: Modified one memo.\n"
"Modified %n memos."
msgstr "已變更 %n 個備忘。"
#: conduits/knotes/knotes-action.cpp:821
#, c-format
msgid ""
"_n: Deleted one memo.\n"
"Deleted %n memos."
msgstr "已刪除 %n 個備忘。"
#: conduits/knotes/knotes-action.cpp:827
#, c-format
msgid ""
"_n: Added one note to KNotes.\n"
"Added %n notes to KNotes."
msgstr "已新增 %n 張便條到 KNotes。"
#: conduits/knotes/knotes-action.cpp:833
#, c-format
msgid ""
"_n: Modified one note in KNotes.\n"
"Modified %n notes in KNotes."
msgstr "已變更 KNotes 中的 %n 張便條。"
#: conduits/knotes/knotes-action.cpp:839
#, c-format
msgid ""
"_n: Deleted one note from KNotes.\n"
"Deleted %n notes from KNotes."
msgstr "已刪除 KNotes 中的 %n 張便條。"
#: conduits/knotes/knotes-action.cpp:844
msgid "No change to KNotes."
msgstr "未改變 KNotes。"
#: conduits/knotes/knotes-factory.cpp:67
msgid "KNotes Conduit for KPilot"
msgstr "KPilot 的 KNotes 導管"
#: conduits/knotes/knotes-factory.cpp:69
msgid "Configures the KNotes Conduit for KPilot"
msgstr "設定 KPilot 的 KNotes 導管KNotes Conduit"
#: conduits/knotes/knotes-setup.cpp:59
msgid "KNotes"
msgstr "KNotes"
#: conduits/malconduit/mal-conduit.cpp:121 conduits/malconduit/mal-setup.cpp:62
msgid "MAL"
msgstr "MAL"
#: conduits/malconduit/mal-conduit.cpp:193
msgid ""
"Skipping MAL sync, because last synchronization was not long enough ago."
msgstr "略過 MAL 同步,因為離上次同步還不夠久。"
#: conduits/malconduit/mal-conduit.cpp:202
msgid "MAL synchronization failed (no SyncInfo)."
msgstr "MAL 同步失敗(沒有同步資訊)。"
#: conduits/malconduit/mal-conduit.cpp:217
msgid "No proxy server is set."
msgstr "沒有設定代理伺服器。"
#: conduits/malconduit/mal-conduit.cpp:220
#, c-format
msgid "Using proxy server: %1"
msgstr "使用代理伺服器:%1"
#: conduits/malconduit/mal-conduit.cpp:259
msgid "No SOCKS proxy is set."
msgstr "沒有設定 SOCKS 代理伺服器。"
#: conduits/malconduit/mal-conduit.cpp:262
#, c-format
msgid "Using SOCKS proxy: %1"
msgstr "使用 SOCKS 代理伺服器:%1"
#: conduits/memofileconduit/memofile-conduit.cpp:70
#: conduits/memofileconduit/memofile-factory.cpp:61
msgid "Memofile"
msgstr "備忘檔"
#: conduits/memofileconduit/memofile-conduit.cpp:101
msgid "Unable to open the memo databases on the handheld."
msgstr "無法在掌上型裝置開啟備忘資料庫。"
#: conduits/memofileconduit/memofile-conduit.cpp:109
msgid "Cannot initialize from pilot."
msgstr "無法從 pilot 初始化。"
#: conduits/memofileconduit/memofile-conduit.cpp:116
msgid "Cannot initialize the memo files from disk."
msgstr "無法從磁碟初始化備忘檔。"
#: conduits/memofileconduit/memofile-conduit.cpp:123
#, c-format
msgid " Syncing with %1."
msgstr "與 %1 同步中"
#: conduits/memofileconduit/memofile-conduit.cpp:126
msgid " Copying Pilot to PC..."
msgstr "從 Pilot 複製到 PC..."
#: conduits/memofileconduit/memofile-conduit.cpp:131
msgid " Copying PC to Pilot..."
msgstr "從 PC 複製到 Pilot..."
#: conduits/memofileconduit/memofile-conduit.cpp:135
msgid " Doing regular sync..."
msgstr "執行正規同步作業中..."
#: conduits/memofileconduit/memofile-factory.cpp:63
msgid "Memofile Conduit for KPilot"
msgstr "KPilot 備忘導管"
#: conduits/memofileconduit/memofile-factory.cpp:65
msgid "Configures the Memofile Conduit for KPilot"
msgstr "設定 KPilot 的備忘導管Memofile Conduit"
#: conduits/notepadconduit/notepad-conduit.cpp:59
#: conduits/notepadconduit/notepad-factory.cpp:89
msgid "Notepad"
msgstr "記事本"
#: conduits/notepadconduit/notepad-conduit.cpp:79
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:591
#, c-format
msgid "Unable to open %1"
msgstr "無法開啟 %1"
#: conduits/notepadconduit/notepad-conduit.cpp:105
#, c-format
msgid ""
"_n: 1 notepad could not be saved\n"
"%n notepads could not be saved"
msgstr "無法儲存 %n 個記事本"
#: conduits/notepadconduit/notepad-conduit.cpp:106
#, c-format
msgid ""
"_n: 1 notepad saved\n"
"%n notepads saved"
msgstr "已儲存 %n 個記事本"
#: conduits/notepadconduit/notepad-factory.cpp:67
msgid "Saves notepads to png files"
msgstr "將記事本存成 png 檔"
#: conduits/notepadconduit/notepad-factory.cpp:69
msgid "Configures the Notepad Conduit for KPilot"
msgstr "設定 KPilot 的記事本導管Notepad Conduit"
#: conduits/notepadconduit/notepad-factory.cpp:78
msgid "Notepad conduit is based on Angus' read-notepad, part of pilot-link"
msgstr ""
"記事本導管是以 Angus 的 read-notepad 為基礎開發出來的。它是 pilot-link 的一部"
"份"
#: conduits/null/null-conduit.cpp:63 conduits/null/null-factory.cpp:63
msgid "Null"
msgstr "虛擬"
#: conduits/null/null-conduit.cpp:81
msgid "NULL conduit is programmed to fail."
msgstr "寫入虛擬導管失敗。"
#: conduits/null/null-factory.cpp:65
msgid "Null Conduit for KPilot"
msgstr "KPilot 的虛擬導管"
#: conduits/null/null-factory.cpp:67
msgid "Configures the Null Conduit for KPilot"
msgstr "設定 KPilot 的虛擬導管Null Conduit"
#: conduits/popmail/popmail-conduit.cpp:89 conduits/popmail/setupDialog.cpp:66
msgid "KMail"
msgstr "KMail"
#: conduits/popmail/popmail-conduit.cpp:118
#, c-format
msgid ""
"_n: Sent one message\n"
"Sent %n messages"
msgstr "已傳送 %n 封信件"
#: conduits/popmail/popmail-conduit.cpp:138
msgid "No mail was sent."
msgstr "沒有送出任何信件"
#: conduits/popmail/popmail-conduit.cpp:145
msgid "No mail could be sent."
msgstr "沒有可傳送的信件。"
#: conduits/popmail/popmail-conduit.cpp:195
msgid "Could not connect to DCOP server for the KMail connection."
msgstr "無法連接 DCOP 伺服器以建立與 KMail 的連線。"
#: conduits/popmail/popmail-conduit.cpp:197
#: conduits/popmail/popmail-conduit.cpp:232
#: conduits/popmail/popmail-conduit.cpp:245
#: conduits/popmail/popmail-conduit.cpp:273
msgid "Error Sending Mail"
msgstr "傳送郵件時發生錯誤"
#: conduits/popmail/popmail-conduit.cpp:230
#: conduits/popmail/popmail-conduit.cpp:243
msgid "Cannot open temporary file to store mail from Pilot in."
msgstr "無法開啟暫存檔以傳送從 Pilot 送來的信件。"
#: conduits/popmail/popmail-conduit.cpp:272
msgid "DCOP connection with KMail failed."
msgstr "與 KMail 的 DCOP 連線失敗。"
#: conduits/popmail/popmail-conduit.cpp:397
msgid "Cannot perform backup of mail database"
msgstr "無法備份信件資料庫"
#: conduits/popmail/popmail-conduit.cpp:405
msgid "Unable to open mail database on handheld"
msgstr "無法在掌上型裝置上開啟信件資料庫"
#: conduits/popmail/setupDialog.cpp:68
msgid "Mail Conduit for KPilot"
msgstr "KPilot 的 Mail 導管"
#: conduits/popmail/setupDialog.cpp:70
msgid "Configures the Mail Conduit for KPilot"
msgstr "設定 KPilot 的 Mail 導管Mail Conduit"
#: conduits/popmail/setupDialog.cpp:78 conduits/vcalconduit/todo-setup.cpp:53
#: conduits/vcalconduit/todo-setup.cpp:55 conduits/vcalconduit/todo-setup.cpp:57
#: conduits/vcalconduit/vcal-setup.cpp:58 conduits/vcalconduit/vcal-setup.cpp:60
#: conduits/vcalconduit/vcal-setup.cpp:62
msgid "Original Author"
msgstr "原始作者"
#: conduits/popmail/setupDialog.cpp:80
msgid "POP3 code"
msgstr "POP3 程式碼"
#: conduits/popmail/setupDialog.cpp:82
msgid "SMTP support and redesign"
msgstr "SMTP 支援與重新設計"
#: conduits/recordconduit/factory.cpp:64
msgid "Record Conduit"
msgstr "紀錄導管"
#: conduits/recordconduit/factory.cpp:66
msgid "Record Conduit for KPilot"
msgstr "KPilot 的紀錄導管"
#: conduits/recordconduit/factory.cpp:68
msgid "Configures the Record Conduit for KPilot"
msgstr "設定 KPilot 的紀錄導管Record Conduit"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:163
#: conduits/sysinfoconduit/sysinfo-setup.cpp:112
msgid "System Information"
msgstr "系統資訊"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:254
msgid "Password set"
msgstr "已設定密碼"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:258
msgid "No password set"
msgstr "未設定密碼"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:308
msgid "No Cards available via pilot-link"
msgstr "無法透過 pilot-link 找到卡片"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:463
msgid "No debug data"
msgstr "沒有除錯資料"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:587
msgid "Unable to open output file, using %1 instead."
msgstr "無法開啟輸出檔,將使用 %1 取代。"
#: conduits/sysinfoconduit/sysinfo-conduit.cpp:602
#, c-format
msgid "Handheld system information written to the file %1"
msgstr "寫入檔案 %1 的掌上型裝置系統資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:52
msgid "HardwareInfo"
msgstr "硬體資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:53
msgid "UserInfo"
msgstr "使用者資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:54
msgid "MemoryInfo"
msgstr "記憶體資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:55
msgid "StorageInfo"
msgstr "儲存裝置資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:56
msgid "DatabaseList"
msgstr "資料庫清單"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:57
msgid "RecordNumbers"
msgstr "紀錄數量"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:58
msgid "SyncInfo"
msgstr "同步資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:59
#, fuzzy
msgid "KDEVersion"
msgstr "TDE 版本"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:60
msgid "PalmOSVersion"
msgstr "PalmOS 版本"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:61
msgid "DebugInformation"
msgstr "除錯資訊"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:95
msgid "KPilot System Information conduit"
msgstr "KPilot 系統資訊導管"
#: conduits/sysinfoconduit/sysinfo-setup.cpp:97
msgid ""
"Retrieves System, Hardware, and User Info from the Handheld and stores them "
"to a file."
msgstr "從掌上型裝置收取系統、硬體與使用者資訊,並儲存到檔案。"
#: conduits/timeconduit/time-conduit.cpp:57
#: conduits/timeconduit/time-setup.cpp:68 kpilot/datebookWidget.cpp:68
msgid "Time"
msgstr "時間"
#: conduits/timeconduit/time-conduit.cpp:91
msgid "Setting the clock on the handheld"
msgstr "設定掌上型裝置的時間"
#: conduits/timeconduit/time-conduit.cpp:108
msgid ""
"PalmOS 3.25 and 3.3 do not support setting the system time. Skipping the "
"time conduit..."
msgstr "PalmOS 3.25 與 3.3 版不支援設定系統時間。將忽略時間導管..."
#: conduits/timeconduit/time-setup.cpp:48
msgid "Time Synchronization Conduit for KPilot"
msgstr "KPilot 的時間同步導管"
#: conduits/timeconduit/time-setup.cpp:50
msgid "Synchronizes the Time on the Handheld and the PC"
msgstr "將掌上型裝置與 PC 上的時間做同步"
#: conduits/vcalconduit/cleanupstate.cpp:62
msgid "Cleaning up ..."
msgstr "清除中..."
#: conduits/vcalconduit/cleanupstate.cpp:91
msgid ""
"An error occurred while uploading \"%1\". You can try to upload the "
"temporary local file \"%2\" manually."
msgstr "上傳 %1 時發生錯誤。您可以試著手動上傳本地的暫存檔 %2。"
#: conduits/vcalconduit/initstate.cpp:59
msgid "Initializing conduit ..."
msgstr "初始化導管中..."
#: conduits/vcalconduit/pctohhstate.cpp:71
msgid "Copying records to Pilot ..."
msgstr "複製紀錄到 Pilot..."
#: conduits/vcalconduit/todo-conduit.cpp:183
#: conduits/vcalconduit/todo-setup.cpp:45
msgid "To-do"
msgstr "待辦事項"
#: conduits/vcalconduit/todo-setup.cpp:47
msgid "To-do Conduit for KPilot"
msgstr "KPilot 的待辦事項導管"
#: conduits/vcalconduit/todo-setup.cpp:49
msgid "Configures the To-do Conduit for KPilot"
msgstr "設定 KPilot 的待辦事項導管To-do Conduit"
#: conduits/vcalconduit/todo-setup.cpp:69
msgid "To-do Destination"
msgstr "待辦事項目的地"
#: conduits/vcalconduit/vcal-conduit.cpp:178
#: conduits/vcalconduit/vcal-setup.cpp:70
msgid "Calendar"
msgstr "行事曆"
#: conduits/vcalconduit/vcal-conduit.cpp:222
msgid ""
"Event \"%1\" has a yearly recurrence other than by month, will change this "
"to recurrence by month on handheld."
msgstr "事件 %1 設定為年度循環,而不是月份循環。在掌上型裝置將改為月份循環。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:183
msgid "Could not open the calendar databases."
msgstr "無法開啟行事曆資料庫。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:269
msgid ""
"You selected to sync with an iCalendar file, but did not give a filename. "
"Please select a valid file name in the conduit's configuration dialog"
msgstr ""
"您選擇要與 iCalendar 檔案同步,但是未指定檔案名稱。請在導管設定對話框中選擇一"
"個合法檔案。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:291
#: conduits/vcalconduit/vcal-conduitbase.cpp:356
#, c-format
msgid "Using local time zone: %1"
msgstr "使用本地端時區 %1"
#: conduits/vcalconduit/vcal-conduitbase.cpp:292
#: conduits/vcalconduit/vcal-conduitbase.cpp:357
#, c-format
msgid "Using non-local time zone: %1"
msgstr "使用非本地端時區 %1"
#: conduits/vcalconduit/vcal-conduitbase.cpp:321
msgid ""
"You chose to sync with the file \"%1\", which cannot be opened or created. "
"Please make sure to supply a valid file name in the conduit's configuration "
"dialog. Aborting the conduit."
msgstr ""
"您選擇與檔案 %1 同步,但是檔案無法開啟或建立。請確定您在導管設定中所給的是正"
"確的檔名。將中止此導管。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:330
msgid "Syncing with file \"%1\""
msgstr "與檔案 %1 同步中"
#: conduits/vcalconduit/vcal-conduitbase.cpp:354
msgid "Syncing with standard calendar resource."
msgstr "與標準行事曆資源同步。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:367
msgid ""
"Unable to initialize the calendar object. Please check the conduit's setup"
msgstr "無法初始化行事曆物件。請檢查導管設定。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:425
msgid ""
"The following item was modified both on the Handheld and on your PC:\n"
"PC entry:\n"
"\t"
msgstr ""
"以下的項目在掌上型裝置與 PC 中都已修改:\n"
"PC 項目:\n"
"\t"
#: conduits/vcalconduit/vcal-conduitbase.cpp:428
msgid ""
"\n"
"Handheld entry:\n"
"\t"
msgstr ""
"\n"
"掌上型裝置項目:\n"
"\t"
#: conduits/vcalconduit/vcal-conduitbase.cpp:430
msgid ""
"\n"
"\n"
"Which entry do you want to keep? It will overwrite the other entry."
msgstr ""
"\n"
"\n"
"您要保存哪個項目?另一個會被覆寫掉。"
#: conduits/vcalconduit/vcal-conduitbase.cpp:435
msgid "Conflicting Entries"
msgstr "衝突的項目"
#: conduits/vcalconduit/vcal-conduitbase.cpp:438 lib/plugin.cpp:309
msgid "PC"
msgstr "PC"
#: conduits/vcalconduit/vcal-setup.cpp:44
msgid "VCal Conduit for KPilot"
msgstr "KPilot 的 VCal 導管"
#: conduits/vcalconduit/vcal-setup.cpp:46
msgid "Configures the VCal Conduit for KPilot"
msgstr "設定 KPilot 的 VCal 導管VCal Conduit"
#: conduits/vcalconduit/vcal-setup.cpp:64
msgid "iCalendar port"
msgstr "iCalendar 移植"
#: conduits/vcalconduit/vcal-setup.cpp:66 kpilot/kpilot.cpp:1038
#: kpilot/kpilot.cpp:1039
msgid "Bugfixer"
msgstr "修正錯誤"
#: conduits/vcalconduit/vcal-setup.cpp:69
msgid "Calendar Destination"
msgstr "行事曆目的地"
#: kpilot/addressEditor.cpp:59
msgid "Address Editor"
msgstr "地址編輯器"
#: kpilot/addressEditor.cpp:107
msgid "Phone"
msgstr "電話"
#: kpilot/addressEditor.cpp:180
msgid "Last name:"
msgstr "姓:"
#: kpilot/addressEditor.cpp:181
msgid "First name:"
msgstr "名:"
#: kpilot/addressEditor.cpp:182
msgid "Title:"
msgstr "職稱:"
#: kpilot/addressEditor.cpp:183
msgid "Company:"
msgstr "公司:"
#: kpilot/addressEditor.cpp:192
msgid "Address:"
msgstr "地址:"
#: kpilot/addressEditor.cpp:193
msgid "City:"
msgstr "城市:"
#: kpilot/addressEditor.cpp:194
msgid "State:"
msgstr "省/州:"
#: kpilot/addressEditor.cpp:195
msgid "Zip code:"
msgstr "郵遞區號:"
#: kpilot/addressEditor.cpp:196
msgid "Country:"
msgstr "國家:"
#: kpilot/addressEditor.cpp:197
msgid "Custom 1:"
msgstr "自訂 1"
#: kpilot/addressEditor.cpp:198
msgid "Custom 2:"
msgstr "自訂 2"
#: kpilot/addressEditor.cpp:199
msgid "Custom 3:"
msgstr "自訂 3"
#: kpilot/addressEditor.cpp:200
msgid "Custom 4:"
msgstr "自訂 4"
#: kpilot/addressWidget.cpp:187
msgid "There are still %1 address editing windows open."
msgstr "目前仍開著 %1 地址編輯視窗。"
#: kpilot/addressWidget.cpp:191
#, c-format
msgid ""
"_n: There is still an address editing window open.\n"
"There are still %n address editing windows open."
msgstr "目前仍開著 %n 個地址編輯視窗。"
#: kpilot/addressWidget.cpp:224
msgid "<qt>Select the category of addresses to display here.</qt>"
msgstr "<qt>選擇要在此顯示的地址類別。</qt>"
#: kpilot/addressWidget.cpp:226 kpilot/memoWidget.cpp:238
#: kpilot/todoWidget.cpp:220
msgid "Category:"
msgstr "類別:"
#: kpilot/addressWidget.cpp:237
msgid ""
"<qt>This list displays all the addresses in the selected category. Click on "
"one to display it to the right.</qt>"
msgstr ""
"<qt>這個清單顯示所選取的類別中的所有地址。點選其中一個,可以在右邊顯示。</qt>"
#: kpilot/addressWidget.cpp:241
msgid "Address info:"
msgstr "地址資訊:"
#: kpilot/addressWidget.cpp:251 kpilot/todoWidget.cpp:257
msgid "Edit Record..."
msgstr "編輯紀錄..."
#: kpilot/addressWidget.cpp:255
msgid "<qt>You can edit an address when it is selected.</qt>"
msgstr "<qt>您可以選取地址並編輯。</qt>"
#: kpilot/addressWidget.cpp:256 kpilot/todoWidget.cpp:263
msgid "<qt><i>Editing is disabled by the 'internal editors' setting.</i></qt>"
msgstr "<qt><i>「內部編輯器」設定關閉編輯功能。</i></qt>"
#: kpilot/addressWidget.cpp:259 kpilot/todoWidget.cpp:266
msgid "New Record..."
msgstr "新紀錄..."
#: kpilot/addressWidget.cpp:263
msgid "<qt>Add a new address to the address book.</qt>"
msgstr "<qt>新增地址到通訊錄中。</qt>"
#: kpilot/addressWidget.cpp:264
msgid "<qt><i>Adding is disabled by the 'internal editors' setting.</i></qt>"
msgstr "<qt><i>「內部編輯器」設定關閉新增功能。</i></qt>"
#: kpilot/addressWidget.cpp:269 kpilot/todoWidget.cpp:275
msgid "Delete Record"
msgstr "刪除紀錄"
#: kpilot/addressWidget.cpp:274
msgid "<qt>Delete the selected address from the address book.</qt>"
msgstr "<qt>從通訊錄中刪除所選取的地址。</qt>"
#: kpilot/addressWidget.cpp:275 kpilot/memoWidget.cpp:285
#: kpilot/todoWidget.cpp:281
msgid "<qt><i>Deleting is disabled by the 'internal editors' setting.</i></qt>"
msgstr "<qt><i>「內部編輯器」設定關閉刪除功能。</i></qt>"
#: kpilot/addressWidget.cpp:277
msgid ""
"_: Export addresses to file\n"
"Export..."
msgstr "匯出..."
#: kpilot/addressWidget.cpp:281
msgid "<qt>Export all addresses in the selected category to CSV format.</qt>"
msgstr "<qt>將所選取類別中所有的位置以 CSV 格式匯出。</qt>"
#: kpilot/addressWidget.cpp:393 lib/pilotMemo.cpp:132
msgid "[unknown]"
msgstr "【未知】"
#: kpilot/addressWidget.cpp:435 kpilot/todoWidget.cpp:363
msgid "Cannot edit new records until HotSynced with Pilot."
msgstr "在與 Pilot 做熱同步前無法編輯新的紀錄。"
#: kpilot/addressWidget.cpp:437 kpilot/addressWidget.cpp:574
#: kpilot/todoWidget.cpp:365 kpilot/todoWidget.cpp:498
msgid "HotSync Required"
msgstr "需要熱同步"
#: kpilot/addressWidget.cpp:480
msgid ""
"You cannot add addresses to the address book until you have done a HotSync "
"at least once to retrieve the database layout from your Pilot."
msgstr ""
"您必須至少執行一次熱同步,從您的 Pilot 上取得資料庫佈局之後,您才能夠開始新增"
"地址。"
#: kpilot/addressWidget.cpp:483
msgid "Cannot Add New Address"
msgstr "無法新增地址"
#: kpilot/addressWidget.cpp:572 kpilot/todoWidget.cpp:496
msgid "New records cannot be deleted until HotSynced with pilot."
msgstr "在與 Pilot 做熱同步前無法刪除新的紀錄。"
#: kpilot/addressWidget.cpp:579 kpilot/todoWidget.cpp:503
msgid "Delete currently selected record?"
msgstr "要刪除目前選取的紀錄嗎?"
#: kpilot/addressWidget.cpp:580 kpilot/todoWidget.cpp:504
msgid "Delete Record?"
msgstr "刪除紀錄?"
#: kpilot/addressWidget.cpp:677
msgid "Export All Addresses"
msgstr "匯出所有的地址"
#: kpilot/addressWidget.cpp:678
#, c-format
msgid "Export Address Category %1"
msgstr "匯出地址類別 %1"
#: kpilot/addressWidget.cpp:696
msgid "The file <i>%1</i> exists. Overwrite?"
msgstr "檔案 <i>%1</i> 已存在。要覆寫嗎?"
#: kpilot/addressWidget.cpp:697
msgid "Overwrite File?"
msgstr "覆寫檔案?"
#: kpilot/addressWidget.cpp:710
msgid "The file <i>%1</i> could not be opened for writing."
msgstr "檔案 <i>%1</i> 無法開啟以寫入。"
#: kpilot/conduitConfigDialog.cpp:252
msgid "<qt>This conduit appears to be broken and cannot be configured.</qt>"
msgstr "<qt>此導管似乎已損毀而無法設定。</qt>"
#: kpilot/conduitConfigDialog.cpp:260
msgid "<qt>This is an old-style conduit.</qt>"
msgstr "<qt>這是舊式的導管。</qt>"
#: kpilot/conduitConfigDialog.cpp:264
msgid "Configure..."
msgstr "設定..."
#: kpilot/conduitConfigDialog.cpp:274
msgid ""
"<qt><i>Conduits</i> are external (possibly third-party) programs that "
"perform synchronization actions. They may have individual configurations. "
"Select a conduit to configure it, and enable it by clicking on its checkbox. "
"</qt>"
msgstr ""
"<qt>所謂的導管(<i>Conduits</i>)是外部程式(有可能是第三者提供的),用以執行"
"同步動作。每個導管都可能有自己的設定。請選擇一個導管,設定好後勾選就可以開始"
"使用。</qt>"
#: kpilot/conduitConfigDialog.cpp:282
msgid ""
"<qt><p>The <i>general</i> portion of KPilot's setup contains settings for "
"your hardware and the way KPilot should display your data. For the basic "
"setup, which should fulfill the need of most users, just use the setup "
"wizard below.</p>If you need some special settings, this dialog provides all "
"the options for fine-tuning KPilot. But be warned: The HotSync settings are "
"various esoteric things.</p><p>You can enable an action or conduit by "
"clicking on its checkbox. Checked conduits will be run during a HotSync. "
"Select a conduit to configure it.</p></qt>"
msgstr ""
"<qt><p>KPilot 設定中的「一般」設定包括了您的硬體,以及 KPilot 顯示您的資料的"
"方法設定。要做基本設定,您可以用底下的組態精靈。</p> <p>如果您需要做一些特殊"
"設定,此對話框提供了微調 KPilot 所需的所有選項。不過請小心熱同步HotSync"
"設定裡多半是一些有經驗的人才懂的設定。</p> <p>您可以勾選以開啟一個動作或導"
"管。所選取的導管會在熱同步時執行。選擇一個導管以設定。</p></qt>"
#: kpilot/conduitConfigDialog.cpp:295
msgid "Configuration Wizard"
msgstr "組態精靈"
#: kpilot/conduitConfigDialog.cpp:369
msgid "About KPilot. Credits."
msgstr "關於 KPilot。致謝。"
#: kpilot/conduitConfigDialog.cpp:372
msgid "Conduits"
msgstr "導管"
#: kpilot/conduitConfigDialog.cpp:374
msgid "General Setup"
msgstr "一般設定"
#: kpilot/conduitConfigDialog.cpp:382
msgid "General setup of KPilot (User name, port, general sync settings)"
msgstr "KPilot 的一般設定(使用者名稱、連接埠、通用同步設定等)"
#: kpilot/conduitConfigDialog.cpp:384
msgid "Actions for HotSync with individual configuration."
msgstr "熱同步動作的個別設定。"
#: kpilot/conduitConfigDialog.cpp:395 kpilot/kpilotConfigDialog.cpp:470
msgid "Startup and Exit"
msgstr "啟動與離開"
#: kpilot/conduitConfigDialog.cpp:395
msgid "Behavior at startup and exit."
msgstr "啟動與離開的行為。"
#: kpilot/conduitConfigDialog.cpp:396 kpilot/kpilotConfigDialog.cpp:418
#: kpilot/kpilotConfigDialog_viewers.ui:33
#, no-c-format
msgid "Viewers"
msgstr "檢視器"
#: kpilot/conduitConfigDialog.cpp:396
msgid "Viewer settings."
msgstr "檢視器設定。"
#: kpilot/conduitConfigDialog.cpp:397 kpilot/kpilotConfigDialog.cpp:328
#: lib/syncAction.cpp:208
msgid "Backup"
msgstr "備份"
#: kpilot/conduitConfigDialog.cpp:397
msgid "Special settings for backup."
msgstr "備份的特別設定。"
#: kpilot/conduitConfigDialog.cpp:398 kpilot/kpilot.cpp:261 kpilot/kpilot.cpp:263
#: kpilot/kpilot.cpp:515 kpilot/kpilotConfigDialog.cpp:242 lib/syncAction.cpp:204
msgid "HotSync"
msgstr "熱同步"
#: kpilot/conduitConfigDialog.cpp:398
msgid "Special behavior during HotSync."
msgstr "熱同步期間的特別行為設定。"
#: kpilot/conduitConfigDialog.cpp:399 kpilot/kpilotConfigDialog.cpp:102
msgid "Device"
msgstr "裝置"
#: kpilot/conduitConfigDialog.cpp:399
msgid "Hardware settings and startup and exit options."
msgstr "硬體設定,以及啟動與離開的選項。"
#: kpilot/conduitConfigDialog.cpp:542
msgid ""
"<qt>This is an internal action which has no configuration options. The "
"action's description is: <i>%1</i> </qt>"
msgstr "<qt>這是沒有設定選項的內部動作。動作的描述為:<i>%1</i>。</qt>"
#: kpilot/conduitConfigDialog.cpp:722
msgid "KPilot Setup"
msgstr "KPilot 設定"
#: kpilot/conduitConfigDialog.cpp:735
msgid ""
"<qt>No library could be found for the conduit %1. This means that the "
"conduit was not installed properly.</qt>"
msgstr "<qt>找不到導管 %1 所需的函式庫。這表示導管沒有正確安裝。</qt>"
#: kpilot/conduitConfigDialog.cpp:745 kpilot/conduitConfigDialog.cpp:762
msgid "Conduit Error"
msgstr "導管錯誤"
#: kpilot/conduitConfigDialog.cpp:752
msgid ""
"<qt>There was a problem loading the library for the conduit %1. This means "
"that the conduit was not installed properly.</qt>"
msgstr "<qt>載入導管 %1 的函式庫時發生問題。這表示導管沒有正確安裝。</qt>"
#: kpilot/datebookWidget.cpp:58 kpilot/dbviewerWidget.cpp:109
msgid "&Add..."
msgstr "新增(&A)..."
#: kpilot/datebookWidget.cpp:61 kpilot/dbviewerWidget.cpp:111
msgid "&Edit..."
msgstr "編輯(&E)..."
#: kpilot/datebookWidget.cpp:64
msgid "&Delete..."
msgstr "刪除(&D)..."
#: kpilot/datebookWidget.cpp:69
msgid "Al"
msgstr "AI"
#: kpilot/datebookWidget.cpp:70
msgid "Rec"
msgstr "紀錄"
#: kpilot/datebookWidget.cpp:71 kpilot/listCat.cpp:85
msgid "Description"
msgstr "描述"
#: kpilot/dbAppInfoEditor.cpp:46
msgid "Edit AppInfo Block"
msgstr "編輯應用程式資訊區塊"
#: kpilot/dbAppInfoEditor.cpp:68
msgid ""
"To view the Application info block data, please install a hex editor (e.g. "
"khexedit from tdeutils)."
msgstr ""
"要檢視應用程式資訊區塊的資料,請安裝十六進位碼編輯器(如 tdeutils 中的 "
"khexedit"
#: kpilot/dbAppInfoEditor.cpp:86
msgid "Changing the AppInfo block isn't yet supported by KPilot!"
msgstr "KPilot 尚未支援變更應用程式區塊。"
#: kpilot/dbFlagsEditor.cpp:45
msgid "Edit Database Flags"
msgstr "編輯資料庫旗標"
#: kpilot/dbFlagsEditor.cpp:60
msgid ""
"Changing the database flags might corrupt the whole database, or make the "
"data unusable. Do not change the values unless you are absolutely sure you "
"know what you are doing.\n"
"\n"
"Really assign these new flags?"
msgstr ""
"變更資料庫旗標可能會造成整個資料庫損毀,或是讓資料無法使用。除非您十分確定您"
"在做什麼,否則不要任意變更這些值。\n"
"\n"
"您確定要指定這些新的旗標嗎?"
#: kpilot/dbFlagsEditor.cpp:60
msgid "Changing Database Flags"
msgstr "變更資料庫旗標"
#: kpilot/dbFlagsEditor.cpp:60 kpilot/dbRecordEditor.cpp:75
msgid "Assign"
msgstr "指定"
#: kpilot/dbRecordEditor.cpp:53
msgid "Edit Record"
msgstr "編輯紀錄"
#: kpilot/dbRecordEditor.cpp:75
msgid ""
"Changing the record data and flags might corrupt the whole record, or even "
"make the database unusable. Do not change the values unless you are "
"absolutely sure you know what you are doing.\n"
"\n"
"Really assign these new flags?"
msgstr ""
"變更紀錄資料與旗標可能會造成整個紀錄損毀,或甚至造成整個資料庫無法使用。除非"
"您十分確定您在做什麼,否則不要任意變更這些值。\n"
"\n"
"您確定要指定這些新的旗標嗎?"
#: kpilot/dbRecordEditor.cpp:75
msgid "Changing Record"
msgstr "變更紀錄"
#: kpilot/dbRecordEditor.cpp:106 kpilot/dbRecordEditor_base.ui:24
#, no-c-format
msgid "Record index:"
msgstr "紀錄索引:"
#: kpilot/dbRecordEditor.cpp:107 kpilot/dbRecordEditor_base.ui:32
#, no-c-format
msgid "Record ID:"
msgstr "紀錄代碼:"
#: kpilot/dbRecordEditor.cpp:108 kpilot/dbRecordEditor.cpp:109
#: kpilot/dbRecordEditor_base.ui:40 kpilot/dbRecordEditor_base.ui:51
#: kpilot/todoEditor_base.ui:99
#, no-c-format
msgid "1"
msgstr "1"
#: kpilot/dbRecordEditor.cpp:110 kpilot/dbRecordEditor_base.ui:70
#, no-c-format
msgid "Flags"
msgstr "旗標"
#: kpilot/dbRecordEditor.cpp:111 kpilot/dbRecordEditor_base.ui:81
#, no-c-format
msgid "&Dirty"
msgstr "未同步Dirty(&D)"
#: kpilot/dbRecordEditor.cpp:112
msgid "De&leted"
msgstr "已刪除(&L)"
#: kpilot/dbRecordEditor.cpp:113
msgid "&Busy"
msgstr "忙碌(&B)"
#: kpilot/dbRecordEditor.cpp:114 kpilot/dbRecordEditor_base.ui:105
#, no-c-format
msgid "&Secret"
msgstr "秘密(&S)"
#: kpilot/dbRecordEditor.cpp:115 kpilot/dbRecordEditor_base.ui:113
#, no-c-format
msgid "&Archived"
msgstr "已歸檔(&A)"
#: kpilot/dbRecordEditor.cpp:193
msgid ""
"To view and edit the record data, please install a hex editor (e.g. "
"kbytesedit from tdeutils)."
msgstr ""
"要檢視與編輯紀錄資料,請安裝十六進位碼編輯器(如 tdeutils 中的 khexedit。"
#: kpilot/dbSelectionDialog.cpp:108
msgid ""
"This is a database that exists on the device. It was not added manually, so "
"it can not removed from the list."
msgstr "這是裝置上的資料庫。它不是手動新增的,所以也無法從清單中移除。"
#: kpilot/dbSelectionDialog.cpp:108
msgid "Database on Device"
msgstr "裝置上的資料庫"
#: kpilot/dbSelectionDialog.cpp:119
msgid "You need to select a database to delete in the list."
msgstr "您需要選取資料庫以從清單上刪除。"
#: kpilot/dbSelectionDialog.cpp:119
msgid "No Database Selected"
msgstr "沒有選取資料庫"
#: kpilot/dbviewerWidget.cpp:84
msgid "All Databases"
msgstr "所有資料庫"
#: kpilot/dbviewerWidget.cpp:85
msgid "Only Applications (*.prc)"
msgstr "應用程式(*.prc"
#: kpilot/dbviewerWidget.cpp:86
msgid "Only Databases (*.pdb)"
msgstr "資料庫(*.pdb"
#: kpilot/dbviewerWidget.cpp:93
msgid "General Database &Information"
msgstr "一般資料庫資訊(&I)"
#: kpilot/dbviewerWidget.cpp:95
msgid "&Application Info Block (Categories etc.)"
msgstr "應用程式資訊區塊(類別等等)(&A)"
#: kpilot/dbviewerWidget.cpp:101
msgid "Rec. Nr."
msgstr "紀錄數量"
#: kpilot/dbviewerWidget.cpp:102
msgid "Length"
msgstr "長度"
#: kpilot/dbviewerWidget.cpp:103
msgid "Record ID"
msgstr "紀錄代碼"
#: kpilot/dbviewerWidget.cpp:189
#, c-format
msgid "<B>Warning:</B> Cannot read database file %1."
msgstr "<B>警告:</B>無法讀取資料庫檔案 %1。"
#: kpilot/dbviewerWidget.cpp:194
msgid "<B>Database:</B> %1, %2 records<BR>"
msgstr "<B>資料庫:</B>%1%2 筆紀錄<BR>"
#: kpilot/dbviewerWidget.cpp:203
msgid "<B>Type:</B> %1, <B>Creator:</B> %2<br><br>"
msgstr "<B>類型:</B>%1<B>建立者:</B>%2<br><br>"
#: kpilot/dbviewerWidget.cpp:246 kpilot/dbviewerWidget.cpp:253
#, c-format
msgid "<B>Warning:</B> Cannot read application file %1."
msgstr "<B>警告:</B>無法讀取應用程式檔案 %1。"
#: kpilot/dbviewerWidget.cpp:260
msgid "<B>Application:</B> %1<BR><BR>"
msgstr "<B>應用程式:</B>%1<BR><BR>"
#: kpilot/dbviewerWidget.cpp:267
msgid "Created: %1<BR>"
msgstr "已建立:%1<BR>"
#: kpilot/dbviewerWidget.cpp:270
msgid "Modified: %1<BR>"
msgstr "已修改:%1<BR>"
#: kpilot/dbviewerWidget.cpp:273
msgid "Backed up: %1<BR>"
msgstr "已備份:%1<BR>"
#: kpilot/dbviewerWidget.cpp:353
msgid "You must select a record for editing."
msgstr "您必須選擇要編輯的紀錄。"
#: kpilot/dbviewerWidget.cpp:353
msgid "No Record Selected"
msgstr "沒有選取紀錄"
#: kpilot/dbviewerWidget.cpp:366
msgid ""
"<qt>Do you really want to delete the selected record? This cannot be undone."
"<br><br>Delete record?<qt>"
msgstr ""
"<qt>您確定要刪除所選取的紀錄嗎?此動作無法復原。<br><br>要刪除紀錄嗎?<qt>"
#: kpilot/dbviewerWidget.cpp:366
msgid "Deleting Record"
msgstr "刪除紀錄中"
#: kpilot/fileInstallWidget.cpp:71
msgid "Files to install:"
msgstr "要安裝的檔案:"
#: kpilot/fileInstallWidget.cpp:77
msgid "Add File..."
msgstr "新增檔案..."
#: kpilot/fileInstallWidget.cpp:81
msgid "<qt>Choose a file to add to the list of files to install.</qt>"
msgstr "<qt>請選取要新增到安裝檔案清單中檔案。</qt>"
#: kpilot/fileInstallWidget.cpp:83
msgid "Clear List"
msgstr "清除清單"
#: kpilot/fileInstallWidget.cpp:87
msgid ""
"<qt>Clear the list of files to install. No files will be installed.</qt>"
msgstr "<qt>清除要安裝的檔案清單。將不安裝任何檔案。</qt>"
#: kpilot/fileInstallWidget.cpp:95
msgid ""
"<qt>This lists files that will be installed on the Pilot during the next "
"HotSync. Drag files here or use the Add button.</qt>"
msgstr ""
"<qt>這裡列出在下次熱同步時要安裝在 Pilot 上的檔案。您可以將檔案拖放到這裡,或"
"是用「新增」按鍵來新增。</qt>"
#: kpilot/fileInstallWidget.cpp:217
msgid "*.pdb *.prc|PalmOS Databases (*.pdb *.prc)"
msgstr "*.pdb *.prc|PalmOS 資料庫(*.pdb *.prc"
#: kpilot/fileInstallWidget.cpp:291
msgid ""
"_: Delete a single file item\n"
"Delete"
msgstr "刪除"
#: kpilot/fileInstallWidget.cpp:294
msgid "Delete selected files"
msgstr "刪除所選取的檔案。"
#: kpilot/fileInstaller.cpp:109
#, c-format
msgid "Cannot install %1"
msgstr "無法安裝 %1"
#: kpilot/fileInstaller.cpp:110
msgid ""
"Only PalmOS database files (like *.pdb and *.prc) can be installed by the "
"file installer."
msgstr "檔案安裝器只能安裝 PalmOS 資料庫檔案(如 *.pdb 與 *.prc。"
#: kpilot/hotSync.cpp:339
#, c-format
msgid "Backup directory: %1."
msgstr "備份目錄:%1。"
#: kpilot/hotSync.cpp:353
msgid "Full backup started."
msgstr "開始完整備份。"
#: kpilot/hotSync.cpp:358
msgid "Fast backup started"
msgstr "開始快速備份。"
#: kpilot/hotSync.cpp:387
msgid "Exiting on cancel."
msgstr "已取消而離開。"
#: kpilot/hotSync.cpp:399
msgid "Full backup complete."
msgstr "完整備份已完成。"
#: kpilot/hotSync.cpp:403
msgid "Fast backup complete."
msgstr "快速備份已完成。"
#: kpilot/hotSync.cpp:419
#, c-format
msgid "Backing up: %1"
msgstr "備份:%1"
#: kpilot/hotSync.cpp:447
#, c-format
msgid "Skipping %1"
msgstr "略過 %1"
#: kpilot/hotSync.cpp:482
msgid "Backup of %1 failed.\n"
msgstr "%1 備份失敗。\n"
#: kpilot/hotSync.cpp:540
msgid "... OK.\n"
msgstr " .. 完成\n"
#: kpilot/hotSync.cpp:548
msgid "Backup failed."
msgstr "備份失敗。"
#: kpilot/hotSync.cpp:607
msgid "[File Installer]"
msgstr "【檔案安裝器】"
#: kpilot/hotSync.cpp:612
msgid "No Files to install"
msgstr "沒有要安裝的檔案"
#: kpilot/hotSync.cpp:624
#, c-format
msgid ""
"_n: Installing one file\n"
"Installing %n Files"
msgstr "安裝了 %n 個檔案"
#: kpilot/hotSync.cpp:649
msgid "Done Installing Files"
msgstr "安裝檔案已完成"
#: kpilot/hotSync.cpp:663
#, c-format
msgid "Installing %1"
msgstr "安裝 %1 中"
#: kpilot/hotSync.cpp:686
msgid "Cannot install file &quot;%1&quot;."
msgstr "無法安裝檔案 %1"
#: kpilot/hotSync.cpp:713 kpilot/hotSync.cpp:723
msgid "Unable to open file &quot;%1&quot;."
msgstr "無法開啟檔案 %1"
#: kpilot/hotSync.cpp:732
msgid "Unable to read file &quot;%1&quot;."
msgstr "無法讀取檔案 %1"
#: kpilot/hotSync.cpp:748
msgid ""
"The database in &quot;%1&quot; has a resource name that is longer than 31 "
"characters. This suggests a bug in the tool used to create the database. "
"KPilot cannot install this database."
msgstr ""
"%1 的資料庫中含有超過 31 個字元的資源名稱。這表示用於建立資料庫的工具可能有問"
"題。KPilot 無法安裝此資料庫。"
#: kpilot/hotSync.cpp:806
msgid ""
"_: A common name\n"
"John Doe"
msgstr "John Doe"
#: kpilot/hotSync.cpp:808
msgid ""
"<qt>Neither KPilot nor the handheld have a username set. They <i>should</i> "
"be set. Should KPilot set them to a default value (<i>%1</i>)?</qt>"
msgstr ""
"<qt>KPilot 與掌上型裝置都沒有設定使用者名稱。使用者名稱必須要設定。要讓 "
"KPilot 設為預設值(<i>%1</i>)嗎?</qt>"
#: kpilot/hotSync.cpp:814 kpilot/hotSync.cpp:831 kpilot/hotSync.cpp:855
msgid "User Unknown"
msgstr "使用者未知"
#: kpilot/hotSync.cpp:826
msgid ""
"<qt>The handheld has a username set (<i>%1</i>) but KPilot does not. Should "
"KPilot use this username in future?</qt>"
msgstr ""
"<qt>掌上型裝置中有設定使用者名稱(<i>%1</i>),但是 KPilot 沒有。要讓 KPilot "
"將來都用這個使用者名稱嗎?"
#: kpilot/hotSync.cpp:844
msgid ""
"KPilot has a username set (<i>%1</i>) but the handheld does not. Should "
"KPilot's username be set in the handheld as well?"
msgstr ""
"<qt>KPilot 中有設定使用者名稱(<i>%1</i>),但是掌上型裝置沒有。要讓掌上型裝"
"置設定此使用者名稱嗎?"
#: kpilot/hotSync.cpp:848
msgid ""
"<br/>(<i>Note:</i> If your handheld has been reset to factory defaults, you "
"should use <i>Restore</i> instead of a regular HotSync. Click on Cancel to "
"stop this sync.)"
msgstr ""
"<br/>(注意:若是您的掌上型裝置已被重置回出廠預設值,您應該用「回復」而不是用"
"熱同步。點選「取消」來取消這次同步。)"
#: kpilot/hotSync.cpp:877
msgid ""
"<qt>The handheld thinks that the username is %1; however, KPilot says you "
"are %2.Which of these is the correct name?\n"
"If you click on Cancel, the sync will proceed, but the usernames will not be "
"changed.</qt>"
msgstr ""
"<qt>掌上型裝置認為使用者名稱為 %1但是 KPilot 認為您是 %2。哪個才是正確的"
"如果您選擇「取消」,會繼續同步,但是使用者名稱不會變更。</qt>"
#: kpilot/hotSync.cpp:887
msgid "User Mismatch"
msgstr "使用者不符合"
#: kpilot/hotSync.cpp:890
msgid "Use KPilot Name"
msgstr "使用 KPilot 名稱"
#: kpilot/hotSync.cpp:891
msgid "Use Handheld Name"
msgstr "使用掌上型裝置名稱"
#: kpilot/hotSync.cpp:997
msgid "Restore directory does not exist."
msgstr "要回復的目錄不存在。"
#: kpilot/hotSync.cpp:998 kpilot/hotSync.cpp:1013
msgid "Restore not performed."
msgstr "回復未執行。"
#: kpilot/hotSync.cpp:1003
msgid ""
"<qt>Are you sure you want to completely restore your Pilot from the backup "
"directory (<i>%1</i>)? This will erase any information you currently have on "
"your Pilot.</qt>"
msgstr ""
"<qt>您確定您要從備份目錄(<i>%1</i>)中完整回復您的 Pilot 嗎?這會將您的 "
"Pilot 上現有的資訊消除掉。</qt>"
#: kpilot/hotSync.cpp:1008
msgid "Restore Pilot"
msgstr "回復 Pilot"
#: kpilot/hotSync.cpp:1010
msgid "Restore <i>not</i> performed."
msgstr "回復<i>未</i>執行。"
#: kpilot/hotSync.cpp:1012
msgid "Canceled by user."
msgstr "使用者已取消。"
#: kpilot/hotSync.cpp:1024 kpilot/hotSync.cpp:1094
msgid "Restoring %1..."
msgstr "回復 %1 中..."
#: kpilot/hotSync.cpp:1044
msgid "File '%1' cannot be read."
msgstr "無法讀取檔案 %1。"
#: kpilot/hotSync.cpp:1071
msgid "OK."
msgstr "完成。"
#: kpilot/hotSync.cpp:1085
msgid "Restore incomplete."
msgstr "回復未完成。"
#: kpilot/hotSync.cpp:1100
msgid "Cannot restore file `%1'."
msgstr "無法回復檔案 %1。"
#: kpilot/internalEditorAction.cpp:62
msgid "[Internal Editors]"
msgstr "【內部編輯器】"
#: kpilot/internalEditorAction.cpp:76
#, c-format
msgid "Databases with changed records: %1"
msgstr "含有已變更紀錄的資料庫:%1"
#: kpilot/internalEditorAction.cpp:101
msgid "Unable to open the serial or local database for %1. Skipping it."
msgstr "無法開啟 %1 的序列或本地資料庫。將略過。"
#: kpilot/internalEditorAction.cpp:156
msgid "record"
msgstr "紀錄"
#: kpilot/internalEditorAction.cpp:166
msgid "address"
msgstr "地址"
#: kpilot/internalEditorAction.cpp:177
msgid "to-do entry"
msgstr "待辦事項"
#: kpilot/internalEditorAction.cpp:186
msgid "memo"
msgstr "備忘"
#: kpilot/internalEditorAction.cpp:197
msgid "calendar entry"
msgstr "行事曆項目"
#: kpilot/internalEditorAction.cpp:204
msgid ""
"The %1 with ID %2 of the database \"%3\" was changed on the handheld and in "
"the internal editor. Shall the changes in KPilot be copied to the handheld, "
"and so override the changes there?"
msgstr ""
"資料庫 %3 的 %1ID %2已經在掌上型裝置與內部編輯器上都做了變更。要將 "
"KPilot 上的變更複製到掌上型裝置,並覆寫那邊的變更嗎?"
#: kpilot/internalEditorAction.cpp:209
#, c-format
msgid "Conflict in database %1"
msgstr "資料庫 %1 發生衝突"
#: kpilot/internalEditorAction.cpp:211
msgid "Use KPilot"
msgstr "使用 KPilot"
#: kpilot/internalEditorAction.cpp:211
msgid "Use Handheld"
msgstr "使用掌上型裝置"
#: kpilot/internalEditorAction.cpp:212
msgid "Use &KPilot"
msgstr "使用 KPilot(&K)"
#: kpilot/internalEditorAction.cpp:213
msgid "Use &Handheld"
msgstr "使用掌上型裝置(&H)"
#: kpilot/internalEditorAction.cpp:228 kpilot/internalEditorAction.cpp:244
msgid "Entry in KPilot"
msgstr "KPilot 裡的項目"
#: kpilot/internalEditorAction.cpp:235 kpilot/internalEditorAction.cpp:272
msgid "Entry on Handheld"
msgstr "掌上型裝置裡的項目"
#: kpilot/internalEditorAction.cpp:263 kpilot/internalEditorAction.cpp:291
msgid ""
"To view and edit the record data, please install a hex editor (e.g. khexedit "
"from tdeutils)."
msgstr ""
"要檢視並編輯紀錄資料,請安裝十六進位碼編輯器(如 tdeutils 中的 khexedit"
#: kpilot/internalEditorAction.cpp:315
#, c-format
msgid "Databases with changed flags: %1"
msgstr "已變更的資料庫:%1"
#: kpilot/internalEditorAction.cpp:333
msgid "Setting the database flags on the handheld is not yet supported."
msgstr "尚未支援設定掌上型裝置的資料庫旗標。"
#: kpilot/internalEditorAction.cpp:356
#, c-format
msgid "Databases with changed AppBlock: %1"
msgstr "已變更應用程式區塊的資料庫:%1"
#: kpilot/kpilot.cpp:162
msgid "Starting the KPilot daemon ..."
msgstr "啟動 KPilot 守護程式..."
#: kpilot/kpilot.cpp:179
msgid ""
"Could not start the KPilot daemon. The system error message was: &quot;"
"%1&quot;"
msgstr "無法啟動 KPilot 守護程式。系統錯誤訊息為:%1"
#: kpilot/kpilot.cpp:196
msgid "Daemon status is `%1'"
msgstr "守護程式狀態為:%1"
#: kpilot/kpilot.cpp:197
msgid "not running"
msgstr "未執行"
#: kpilot/kpilot.cpp:214
msgid "Using character set %1 on the handheld."
msgstr "掌上型裝置使用字元集 %1。"
#: kpilot/kpilot.cpp:266 kpilot/kpilot.cpp:268
msgid "To-do Viewer"
msgstr "待辦事項檢視器"
#: kpilot/kpilot.cpp:270 kpilot/kpilot.cpp:272
#: kpilot/kpilotConfigDialog_viewers.ui:74
#, no-c-format
msgid "Address Viewer"
msgstr "地址檢視器"
#: kpilot/kpilot.cpp:274 kpilot/kpilot.cpp:276
msgid "Memo Viewer"
msgstr "備忘錄檢視器"
#: kpilot/kpilot.cpp:278 kpilot/kpilot.cpp:281 kpilot/pilotDaemon.cpp:736
msgid "File Installer"
msgstr "檔案安裝器"
#: kpilot/kpilot.cpp:283 kpilot/kpilot.cpp:285
msgid "Generic DB Viewer"
msgstr "一般資料庫檢視器"
#: kpilot/kpilot.cpp:360
msgid "Next sync will be a backup. "
msgstr "下一次同步將做備份。"
#: kpilot/kpilot.cpp:361 kpilot/kpilot.cpp:369 kpilot/kpilot.cpp:377
#: kpilot/kpilot.cpp:385 kpilot/kpilot.cpp:393 kpilot/kpilot.cpp:401
#: kpilot/pilotDaemon.cpp:671
msgid "Please press the HotSync button."
msgstr "請按下熱同步鍵。"
#: kpilot/kpilot.cpp:368
msgid "Next sync will restore the Pilot from backup. "
msgstr "下一次同步將從備份回復 Pilot。"
#: kpilot/kpilot.cpp:376
msgid "Next sync will be a regular HotSync. "
msgstr "下一次同步將做正規的熱同步。"
#: kpilot/kpilot.cpp:384
msgid "Next sync will be a Full Sync. "
msgstr "下一次同步將做完整同步。"
#: kpilot/kpilot.cpp:392
msgid "Next sync will copy Handheld data to PC. "
msgstr "下一次同步將複製掌上型裝置資料到 PC。"
#: kpilot/kpilot.cpp:400
msgid "Next sync will copy PC data to Handheld. "
msgstr "下一次同步將複製 PC 資料到掌上型裝置。"
#: kpilot/kpilot.cpp:428
msgid "The daemon has exited."
msgstr "守護程式已離開。"
#: kpilot/kpilot.cpp:429
msgid "No further HotSyncs are possible."
msgstr "無法再做熱同步。"
#: kpilot/kpilot.cpp:430
msgid "Restart the daemon to HotSync again."
msgstr "要再做熱同步,請重新啟動守護程式。"
#: kpilot/kpilot.cpp:450
#, c-format
msgid "Cannot start a Sync now. %1"
msgstr "目前無法啟動同步。%1"
#: kpilot/kpilot.cpp:463
msgid "Cannot start Sync"
msgstr "無法開始同步。"
#: kpilot/kpilot.cpp:517
msgid "Select the kind of HotSync to perform next."
msgstr "選擇下次要執行的熱同步種類。"
#: kpilot/kpilot.cpp:518
msgid ""
"Select the kind of HotSync to perform next. This applies only to the next "
"HotSync; to change the default, use the configuration dialog."
msgstr ""
"選擇下次要執行的熱同步種類。這只在下次熱同步時套用。如果要改變預設值,請到設"
"定對話框中設定。"
#: kpilot/kpilot.cpp:525
msgid "&HotSync"
msgstr "熱同步(&H)"
#: kpilot/kpilot.cpp:528
msgid "Next HotSync will be normal HotSync."
msgstr "下一次熱同步將執行正常熱同步。"
#: kpilot/kpilot.cpp:529
msgid "Tell the daemon that the next HotSync should be a normal HotSync."
msgstr "告訴守護程式,下次熱同步時應該執行正常的熱同步動作。"
#: kpilot/kpilot.cpp:533
msgid "Full&Sync"
msgstr "完整同步(&S)"
#: kpilot/kpilot.cpp:536
msgid "Next HotSync will be a FullSync."
msgstr "下一次熱同步將執行完整同步。"
#: kpilot/kpilot.cpp:537
msgid ""
"Tell the daemon that the next HotSync should be a FullSync (check data on "
"both sides)."
msgstr "告訴守護程式,下次熱同步時應該執行完整同步(檢查兩邊的資料)。"
#: kpilot/kpilot.cpp:541
msgid "&Backup"
msgstr "備份(&B)"
#: kpilot/kpilot.cpp:544 kpilot/kpilot.cpp:560
msgid "Next HotSync will be backup."
msgstr "下一次熱同步將執行備份。"
#: kpilot/kpilot.cpp:545
msgid ""
"Tell the daemon that the next HotSync should back up the Handheld to the PC."
msgstr "告訴守護程式,下次熱同步時應該將掌上型裝置的資料備份到 PC 上。"
#: kpilot/kpilot.cpp:549
msgid "&Restore"
msgstr "回復(&R)"
#: kpilot/kpilot.cpp:552
msgid "Next HotSync will be restore."
msgstr "下一次熱同步將執行回復。"
#: kpilot/kpilot.cpp:553
msgid ""
"Tell the daemon that the next HotSync should restore the Handheld from data "
"on the PC."
msgstr "告訴守護程式,下次熱同步時應該將 PC 上的備份資料回復到掌上型裝置上。"
#: kpilot/kpilot.cpp:557 kpilot/kpilotConfigDialog_sync.ui:59
#: lib/syncAction.cpp:207
#, no-c-format
msgid "Copy Handheld to PC"
msgstr "從掌上型裝置複製到 PC"
#: kpilot/kpilot.cpp:561
msgid ""
"Tell the daemon that the next HotSync should copy all data from the Handheld "
"to the PC, overwriting entries on the PC."
msgstr ""
"告訴守護程式,下次熱同步時應該將掌上型裝置的所有資料複製到 PC 上,並覆寫在 "
"PC 上現有的項目。"
#: kpilot/kpilot.cpp:566 kpilot/kpilotConfigDialog_sync.ui:54
#: lib/syncAction.cpp:206
#, no-c-format
msgid "Copy PC to Handheld"
msgstr "從 PC 複製到掌上型裝置"
#: kpilot/kpilot.cpp:569
msgid "Next HotSync will copy PC to Handheld."
msgstr "下一次熱同步將從 PC 複製到掌上型裝置。"
#: kpilot/kpilot.cpp:570
msgid ""
"Tell the daemon that the next HotSync should copy all data from the PC to "
"the Handheld, overwriting entries on the Handheld."
msgstr ""
"告訴守護程式,下次熱同步時應該將 PC 上的所有資料複製到掌上型裝置上,並覆寫在"
"掌上型裝置上現有的項目。"
#: kpilot/kpilot.cpp:577
msgid "&List Only"
msgstr "只列出(&L)"
#: kpilot/kpilot.cpp:580
msgid "Next HotSync will list databases."
msgstr "下一次熱同步將只列出資料庫。"
#: kpilot/kpilot.cpp:581
msgid ""
"Tell the daemon that the next HotSync should just list the files on the "
"Handheld and do nothing else."
msgstr "告訴守護程式,下次熱同步時只要列出在掌上型清單中的檔案即可。"
#: kpilot/kpilot.cpp:588
msgid "Rese&t Link"
msgstr "重置連結(&T)"
#: kpilot/kpilot.cpp:591
msgid "Reset the device connection."
msgstr "重置與裝置的連結。"
#: kpilot/kpilot.cpp:592
msgid "Try to reset the daemon and its connection to the Handheld."
msgstr "試著重置守護程式及與掌上型裝置的連結。"
#: kpilot/kpilot.cpp:597
msgid "Quit KPilot, (and stop the daemon if configured that way)."
msgstr "離開 KPilot並依據設定決定是否停止守護程式。"
#: kpilot/kpilot.cpp:613
msgid "Configuration &Wizard..."
msgstr "組態精靈(&W)..."
#: kpilot/kpilot.cpp:616
msgid "Configure KPilot using the configuration wizard."
msgstr "使用組態精靈來設定 KPilot。"
#: kpilot/kpilot.cpp:851
msgid ""
"The library containing the configuration wizard for KPilot could not be "
"loaded, and the wizard is not available. Please try to use the regular "
"configuration dialog."
msgstr "無法載入 KPilot 組態精靈的函式庫,因此無法啟動精靈。請使用設定對話框。"
#: kpilot/kpilot.cpp:854
msgid "Wizard Not Available"
msgstr "無法使用精靈"
#: kpilot/kpilot.cpp:898
msgid "Changed username to `%1'."
msgstr "變更使用者名稱為 %1。"
#: kpilot/kpilot.cpp:927
msgid ""
"Cannot run KPilot's configuration wizard right now (KPilot's UI is already "
"busy)."
msgstr "目前無法執行 KPilot 組態精靈KPilot 的使用者介面正在忙碌中)。"
#: kpilot/kpilot.cpp:951
msgid "Cannot configure KPilot right now (KPilot's UI is already busy)."
msgstr "目前無法設定 KPilotKPilot 的使用者介面正在忙碌中)。"
#: kpilot/kpilot.cpp:991
msgid "Setup the Pilot device, conduits and other parameters"
msgstr "設定 Pilot 裝置、導管與其他參數"
#: kpilot/kpilot.cpp:993 kpilot/pilotDaemon.cpp:1296
msgid "Set debugging level"
msgstr "設定除錯等級"
#: kpilot/kpilot.cpp:1015
msgid "KPilot"
msgstr "KPilot"
#: kpilot/kpilot.cpp:1024 kpilot/pilotDaemon.cpp:1320
msgid "Project Leader"
msgstr "專案領導者"
#: kpilot/kpilot.cpp:1030 kpilot/kpilot.cpp:1032
msgid "Core and conduits developer"
msgstr "核心與導管開發者"
#: kpilot/kpilot.cpp:1034
msgid "VCal conduit"
msgstr "VCal 導管"
#: kpilot/kpilot.cpp:1035
msgid "Abbrowser conduit"
msgstr "Abbrowser 導管"
#: kpilot/kpilot.cpp:1036
msgid "Expenses conduit"
msgstr "Expense 導管"
#: kpilot/kpilot.cpp:1037
msgid "Notepad conduit, Bugfixer"
msgstr "筆記本導管,錯誤修正"
#: kpilot/kpilot.cpp:1041
msgid "XML GUI"
msgstr "XML 使用者介面"
#: kpilot/kpilot.cpp:1044
msgid ".ui files"
msgstr ".ui 檔"
#: kpilot/kpilot.cpp:1046
msgid "Bugfixer, coolness"
msgstr "錯誤修正"
#: kpilot/kpilot.cpp:1048
msgid "VCalconduit state machine, CMake"
msgstr "VCalconduit 狀態機器CMake"
#: kpilot/kpilotConfig.cpp:163
msgid "The configuration file is outdated."
msgstr "此設定檔已過期。"
#: kpilot/kpilotConfig.cpp:165
msgid "The configuration file has version %1, while KPilot needs version %2."
msgstr "設定檔的版本為 %1但 KPilot 需要版本 %2。"
#: kpilot/kpilotConfig.cpp:170
msgid ""
"Please run KPilot and check the configuration carefully to update the file."
msgstr "請執行 KPilot 並小心檢查組態設定的更新。"
#: kpilot/kpilotConfig.cpp:174
msgid "Important changes to watch for are:"
msgstr "您應該檢查一些重要的變更,如:"
#: kpilot/kpilotConfig.cpp:178
msgid ""
"Renamed conduits, Kroupware and file installer have been made conduits as "
"well."
msgstr "導管重命名、Kroupware、以及檔案安裝器也做成導管了。"
#: kpilot/kpilotConfig.cpp:181
msgid "Conflict resolution is now a global setting."
msgstr "解決衝突現在移到了全域設定。"
#: kpilot/kpilotConfig.cpp:186
msgid "Changed format of no-backup databases."
msgstr "改變無備份資料庫的格式。"
#: kpilot/kpilotConfig.cpp:199
msgid ""
"The configuration file for KPilot is out-of date. Please run KPilot to "
"update it."
msgstr "KPilot 的設定檔已過期。請執行 KPilot 以更新。"
#: kpilot/kpilotConfig.cpp:202 kpilot/kpilotConfig.cpp:327
msgid "Configuration File Out-of Date"
msgstr "設定檔已過期"
#: kpilot/kpilotConfig.cpp:220
msgid ""
"The settings for the file installer have been moved to the conduits "
"configuration. Check the installed conduits list."
msgstr "此檔案安裝器的設定已經移到了導管設定。請檢查已安裝的導管清單。"
#: kpilot/kpilotConfig.cpp:223
msgid "Settings Updated"
msgstr "設定已更新"
#: kpilot/kpilotConfig.cpp:248
msgid ""
"<qt>The following old conduits were found on your system. It is a good idea "
"to remove them and the associated <tt>.la</tt> and <tt>.so.0</tt> files.</qt>"
msgstr ""
"<qt>在您的系統上發現了以下的舊導管。建議您將相關的 <tt>.la</tt> 與 <tt>."
"so.0</tt> 檔案移除。</qt>"
#: kpilot/kpilotConfig.cpp:253
msgid "Old Conduits Found"
msgstr "找到舊導管"
#: kpilot/kpilotConfig.cpp:285
msgid ""
"<qt>The no backup databases listed in your configuration file have been "
"adjusted to the new format. Database creator IDs have been changed to use "
"square brackets []."
msgstr ""
"<qt>列在您的設定檔中的無備份資料庫已經調整為新的格式。資料庫建立者代碼已經改"
"為用方括號 [] 括起來。"
#: kpilot/kpilotConfig.cpp:289
msgid "No Backup Databases Updated"
msgstr "無備份資料庫已更新"
#: kpilot/kpilotConfig.cpp:310
msgid ""
"KPilot is not configured for use. You may use the configuration wizard or "
"the normal configure dialog to configure KPilot."
msgstr ""
"KPilot 設未設定完成。您可以用組態精靈,或是一般的設定對話框來設定 KPilot。"
#: kpilot/kpilotConfig.cpp:313
msgid "Not Configured"
msgstr "尚未設定"
#: kpilot/kpilotConfig.cpp:314
msgid "Use &Wizard"
msgstr "使用精靈(&W)"
#: kpilot/kpilotConfig.cpp:315
msgid "Use &Dialog"
msgstr "使用對話框(&D)"
#: kpilot/kpilotConfig.cpp:323
msgid ""
"The configuration file for KPilot is out-of date. KPilot can update some "
"parts of the configuration automatically. Do you wish to continue?"
msgstr ""
"KPilot 的設定檔已過期。KPilot 可以自動更新設定檔中的某些部份。您要繼續嗎?"
#: kpilot/kpilotConfigDialog.cpp:68
msgid ""
"<qt>The settings for configuration page <i>%1</i> have been changed. Do you "
"want to save the changes before continuing?</qt>"
msgstr "<qt>設定頁 <i>%1</i> 中的設定已變更。您要儲存變更嗎?</qt>"
#: kpilot/kpilotConfigDialog.cpp:145
msgid ""
"<qt>The device name you entered (<i>%1</i>) is longer than 13 characters. "
"This is probably unsupported and can cause problems. Are you sure you want "
"to use this device name?</qt>"
msgstr ""
"<qt>您輸入的裝置名稱(<i>%1</i>)超過了 13 個字元,可能無法支援並會產生問題。"
"您確定要使用此裝置名稱嗎?</qt>"
#: kpilot/kpilotConfigDialog.cpp:150
msgid "Device Name too Long"
msgstr "裝置名稱過長"
#: kpilot/kpilotConfigDialog.cpp:150
msgid "Use"
msgstr "使用"
#: kpilot/kpilotConfigDialog.cpp:150
msgid "Do Not Use"
msgstr "不使用"
#: kpilot/kpilotConfigWizard.cpp:62
msgid "Pilot Info"
msgstr "Pilot 資訊"
#: kpilot/kpilotConfigWizard.cpp:64
msgid "Application to Sync With"
msgstr "要同步的應用程式"
#: kpilot/kpilotConfigWizard.cpp:127
msgid "general TDE-PIM"
msgstr "一般 TDE 個人資訊管理"
#: kpilot/kpilotConfigWizard.cpp:133
msgid ""
"_: Gnome's PIM suite\n"
"Evolution"
msgstr "Evolution"
#: kpilot/kpilotConfigWizard.cpp:157
msgid ""
"KPilot cannot yet synchronize the addressbook with Evolution, so the "
"addressbook conduit was disabled.\n"
"When syncing the calendar or to-do list using KPilot please quit Evolution "
"before the sync, otherwise you will lose data."
msgstr ""
"KPilot 目前還無法與 Evolution 的通訊錄同步,因此通訊錄導管已被關閉。若要使用 "
"KPilot 來同步行事曆或待辦事項,請先離開 Evolution以避免資料流失。"
#: kpilot/kpilotConfigWizard.cpp:157
msgid "Restrictions with Evolution"
msgstr "Evolution 的限制"
#: kpilot/kpilotConfigWizard.cpp:162
msgid ""
"_: Kpilot will sync with nothing\n"
"nothing (it will backup only)"
msgstr "無(只做備份)"
#: kpilot/kpilotConfigWizard.cpp:166
msgid ""
"_: TDE's PIM suite\n"
"Kontact"
msgstr "Kontact"
#: kpilot/kpilotConfigWizard.cpp:200
#, c-format
msgid "KPilot is now configured to sync with %1."
msgstr "KPilot 目前設定與 %1 同步。"
#: kpilot/kpilotConfigWizard.cpp:205
msgid ""
"The remaining options in the config dialog are advanced options and can be "
"used to fine-tune KPilot."
msgstr "設定對話框中的其它選項是進階選項,可用於微調 KPilot。"
#: kpilot/kpilotConfigWizard.cpp:210
msgid "Automatic Configuration Finished"
msgstr "自動組態設定已完成"
#: kpilot/kpilotConfigWizard.cpp:217
msgid ""
"Please put the handheld in the cradle, press the hotsync button and click on "
"\"Continue\".\n"
"\n"
"Some kernel versions (Linux 2.6.x) have problems with the visor kernel "
"module (for Sony Clie devices). Running an autodetection in that case might "
"block the computer from doing hotsyncs until it is rebooted. In that case it "
"might be advisable not to continue."
msgstr ""
"請將掌上型裝置放於架上,按下熱同步鍵,並點選「繼續」。\n"
"\n"
"有些核心版本Linux 2.6.x的 visor 模組Sony Clie 裝置用的)有些問題。若使"
"用該模組執行自動偵測可能會鎖住電腦無法執行熱同步,直到重開機為止。若是這種狀"
"況,最好不要繼續。"
#: kpilot/kpilotConfigWizard.cpp:223
msgid "Handheld Detection"
msgstr "偵測掌上型裝置"
#: kpilot/kpilotProbeDialog.cpp:90
msgid "Autodetecting Your Handheld"
msgstr "自動偵測您的掌上型裝置"
#: kpilot/kpilotProbeDialog.cpp:90
msgid "Restart Detection"
msgstr "重新開始偵測"
#: kpilot/kpilotProbeDialog.cpp:97
msgid ""
"KPilot is now trying to automatically detect the device of your handheld. "
"Please press the hotsync button if you have not done so already."
msgstr ""
"KPilot 現在正試著自動偵測您的掌上型裝置。如果您尚未執行,請按下熱同步鍵。"
#: kpilot/kpilotProbeDialog.cpp:100
msgid "Status"
msgstr "狀態"
#: kpilot/kpilotProbeDialog.cpp:104
msgid "Autodetection not yet started..."
msgstr "自動偵測尚未開始..."
#: kpilot/kpilotProbeDialog.cpp:113
msgid "Detected Values"
msgstr "偵測值"
#: kpilot/kpilotProbeDialog.cpp:119
msgid "Handheld user:"
msgstr "掌上型裝置使用者:"
#: kpilot/kpilotProbeDialog.cpp:123
msgid "Device:"
msgstr "裝置:"
#: kpilot/kpilotProbeDialog.cpp:126 kpilot/kpilotProbeDialog.cpp:129
msgid "[Not yet known]"
msgstr "【尚未知】"
#: kpilot/kpilotProbeDialog.cpp:195
msgid "Starting detection..."
msgstr "開始偵測..."
#: kpilot/kpilotProbeDialog.cpp:233
msgid "Waiting for handheld to connect..."
msgstr "等待掌上型裝置連線..."
#: kpilot/kpilotProbeDialog.cpp:266
msgid "Timeout reached, could not detect a handheld."
msgstr "已逾時,無法偵測到掌上型裝置。"
#: kpilot/kpilotProbeDialog.cpp:267
msgid ""
"<qt>A handheld could not be detected. Possible check the following things:</"
"p><ul><li> Have you pressed the hotsync button on the handheld?\n"
"<li> Make sure the device sits in the cradle correctly.\n"
"<li> Make sure the cradle is correctly plugged in to the computer.\n"
"<li> Have you checked that your device is actually supported by kpilot (see "
"http://www.kpilot.org).\n"
"</ul>"
msgstr ""
"<qt><p>無法偵測到掌上型裝置。請檢查下列事項:</p> <ul> <li>您是否已按下了掌上"
"型裝置上的熱同步鍵?\n"
"<li>請確認此裝置已正確地放置在架上。\n"
"<li>請確定裝置架已正確地連線到電腦上。\n"
"<li>您是否確定 KPilot 支援您的裝置?(請參考 http://www.kpilot.org\n"
"</ul>"
#: kpilot/kpilotProbeDialog.cpp:273
msgid "Automatic Detection Failed"
msgstr "自動偵測失敗"
#: kpilot/kpilotProbeDialog.cpp:288
#, c-format
msgid "Found a connected device on %1"
msgstr "在 %1 找到一個已連線的裝置"
#: kpilot/kpilotProbeDialog.cpp:338
msgid "Disconnected from all devices"
msgstr "中斷與所有裝置的連線"
#: kpilot/kroupware.cpp:126
msgid "Syncing to-dos with KMail"
msgstr "與 KMail 同步待辦事項"
#: kpilot/kroupware.cpp:135
msgid "Syncing calendar with KMail"
msgstr "與 KMail 同步行事曆"
#: kpilot/kroupware.cpp:177
msgid "Syncing Notes with Mail"
msgstr "與 KMail 同步備忘錄"
#: kpilot/kroupware.cpp:188
msgid "Rewriting to-dos to KMail..."
msgstr "重新將待辦事項寫入 KMail..."
#: kpilot/kroupware.cpp:195
msgid "Rewriting Calendar to KMail"
msgstr "重新將行事曆寫入 KMail..."
#: kpilot/kroupware.cpp:230
msgid "Syncing KMail with Addresses "
msgstr "同步 KMail 與通訊錄中"
#: kpilot/kroupware.cpp:259
msgid "Syncing KMail with Notes"
msgstr "同步 KMail 與備忘錄中"
#: kpilot/logFile.cpp:97 lib/actions.cpp:134
msgid "HotSync finished."
msgstr "熱同步已完成."
#: kpilot/logWidget.cpp:90
msgid ""
"<qt>This lists all the messages received during the current HotSync</qt>"
msgstr "<qt>這裡列出所有熱同步期間接收到的訊息</qt>"
#: kpilot/logWidget.cpp:119
msgid "<qt><b>HotSync Log</b></qt>"
msgstr "<qt><b>熱同步紀錄</b></qt>"
#: kpilot/logWidget.cpp:134
msgid ""
"_: Clear the text of HotSync messages\n"
"Clear Log"
msgstr "清除紀錄"
#: kpilot/logWidget.cpp:136
msgid "<qt>Clears the list of messages from the current HotSync.</qt>"
msgstr "<qt>清除目前熱同步的訊息清單。</qt>"
#: kpilot/logWidget.cpp:140
msgid "Save Log..."
msgstr "儲存紀錄..."
#: kpilot/logWidget.cpp:141
msgid ""
"<qt>You can save the list of messages received during this HotSync to a file "
"(for example for use in a bug report) by clicking here.</qt>"
msgstr ""
"<qt>您可以點選這裡,以將目前熱同步期間所接收到的訊息清單儲存到檔案中(可以用"
"於回報錯誤)。</qt>"
#: kpilot/logWidget.cpp:150
msgid "Sync progress:"
msgstr "同步進度:"
#: kpilot/logWidget.cpp:153
msgid "<qt>The (estimated) percentage completed in the current HotSync.</qt>"
msgstr "<qt>目前熱同步已完成的百分比(估計值)</qt>"
#: kpilot/logWidget.cpp:270
msgid "<b>HotSync Finished.</b>"
msgstr "<b>熱同步已完成。</b>"
#: kpilot/logWidget.cpp:334
msgid "Save Log"
msgstr "儲存紀錄"
#: kpilot/logWidget.cpp:341
msgid "The file exists. Do you want to overwrite it?"
msgstr "檔案已存在。您要覆寫它嗎?"
#: kpilot/logWidget.cpp:343
msgid "File Exists"
msgstr "檔案已存在"
#: kpilot/logWidget.cpp:343
msgid "Do Not Overwrite"
msgstr "不要覆寫"
#: kpilot/logWidget.cpp:367
msgid "<qt>Cannot open the file &quot;%1&quot; for writing; try again?</qt>"
msgstr "<qt>無法開啟檔案 %1 以寫入。要再試一次嗎?</qt>"
#: kpilot/logWidget.cpp:369
msgid "Cannot Save"
msgstr "無法儲存"
#: kpilot/logWidget.cpp:369
msgid "Try Again"
msgstr "再試一次"
#: kpilot/logWidget.cpp:369
msgid "Do Not Try"
msgstr "不要嘗試"
#: kpilot/main-test.cpp:66
msgid "Path to Pilot device node"
msgstr "Pilot 裝置路徑"
#: kpilot/main-test.cpp:69
msgid "List DBs"
msgstr "列出資料庫"
#: kpilot/main-test.cpp:71
msgid "Backup Pilot to <dest dir>"
msgstr "備份 Pilot 到【目標目錄】"
#: kpilot/main-test.cpp:73
msgid "Restore Pilot from backup"
msgstr "從備份還原 Pilot"
#: kpilot/main-test.cpp:76
msgid "Run conduit from desktop file <filename>"
msgstr "從 desktop 檔案 <filename> 中執行導管"
#: kpilot/main-test.cpp:80
msgid "Run a specific check (with the device)"
msgstr "(對裝置)執行特定的檢查"
#: kpilot/main-test.cpp:83
msgid "Show KPilot configuration information"
msgstr "顯示 KPilot 設定資訊"
#: kpilot/main-test.cpp:86
msgid "Set the debug level"
msgstr "設定除錯等級"
#: kpilot/main-test.cpp:94
msgid "*Really* run the conduit, not in test mode."
msgstr "【實際】執行導管,而非測試模式。"
#: kpilot/main-test.cpp:98
msgid "Run the conduit in file-test mode."
msgstr "以檔案測試模式執行導管。"
#: kpilot/main-test.cpp:101
msgid "Copy Pilot to Desktop."
msgstr "複製 Pilot 到桌面。"
#: kpilot/main-test.cpp:104
msgid "Copy Desktop to Pilot."
msgstr "複製桌面到.Pilot。"
#: kpilot/main-test.cpp:107
msgid "Repeated perform action - only useful for --list"
msgstr "重複執行動作,只對 --list 有用"
#: kpilot/main-test.cpp:347
msgid "KPilotTest"
msgstr "KPilotTest"
#: kpilot/main-test.cpp:352
msgid "KPilot Maintainer"
msgstr "KPilot 維護者"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:38
#: conduits/docconduit/doc-setupdialog.ui:43
#: conduits/docconduit/kpalmdoc_dlgbase.ui:28 conduits/knotes/setup_base.ui:34
#: conduits/malconduit/mal-setup_dialog.ui:38
#: conduits/memofileconduit/setup_base.ui:68
#: conduits/notepadconduit/notepad-setup.ui:32 conduits/null/setup_base.ui:68
#: conduits/recordconduit/setup_base.ui:68
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:35
#: conduits/timeconduit/time-setup_dialog.ui:35
#: conduits/vcalconduit/korganizerConduit.ui:66 kpilot/main-test.cpp:357
#, no-c-format
msgid "General"
msgstr "一般"
#: kpilot/main-test.cpp:359
msgid "Conduit Actions"
msgstr "導管動作"
#: kpilot/memoWidget.cpp:234
msgid ""
"Select the category of addresses\n"
"to display here."
msgstr "選擇要在此顯示的通訊錄類別。"
#: kpilot/memoWidget.cpp:237
msgid "Memos:"
msgstr "備忘錄:"
#: kpilot/memoWidget.cpp:249
msgid ""
"This list displays all the memos\n"
"in the selected category. Click on\n"
"one to display it to the right."
msgstr ""
"此清單顯示所選類別的所有備忘錄。\n"
"點選其中一個,可以在右邊顯示。"
#: kpilot/memoWidget.cpp:253
msgid "Memo text:"
msgstr "備忘錄文字:"
#: kpilot/memoWidget.cpp:261
msgid "The text of the selected memo appears here."
msgstr "所選取的備忘錄中的文字顯示在這裡。"
#: kpilot/memoWidget.cpp:264
msgid "Import Memo..."
msgstr "匯入備忘錄..."
#: kpilot/memoWidget.cpp:268
msgid "Read a text file and add it to the Pilot's memo database."
msgstr "讀取文字檔,並新增到 Pilot 的備忘資料庫。"
#: kpilot/memoWidget.cpp:269
msgid "<qt><i>Import is disabled by the 'internal editors' setting.</i></qt>"
msgstr "<qt><i>「內部編輯器」設定關閉匯入功能。</i></qt>"
#: kpilot/memoWidget.cpp:272
msgid "Export Memo..."
msgstr "匯出備忘錄..."
#: kpilot/memoWidget.cpp:277
msgid "Write the selected memo to a file."
msgstr "將所選取的備忘錄寫入到檔案。"
#: kpilot/memoWidget.cpp:279
msgid "Delete Memo"
msgstr "刪除備忘錄"
#: kpilot/memoWidget.cpp:284
msgid "Delete the selected memo."
msgstr "刪除所選取的備忘錄。"
#: kpilot/memoWidget.cpp:288
msgid "Add Memo"
msgstr "新增備忘錄"
#: kpilot/memoWidget.cpp:291
msgid "Add a new memo to the database."
msgstr "新增新的備忘錄到資料庫中。"
#: kpilot/memoWidget.cpp:343
msgid "Delete currently selected memo?"
msgstr "要刪除所選取的備忘錄嗎?"
#: kpilot/memoWidget.cpp:344
msgid "Delete Memo?"
msgstr "刪除備忘錄?"
#: kpilot/memoWidget.cpp:367
msgid "Cannot open MemoDB to delete record."
msgstr "無法開啟備忘錄資料庫以刪除紀錄。"
#: kpilot/memoWidget.cpp:368
msgid "Cannot Delete Memo"
msgstr "無法刪除備忘錄"
#: kpilot/pilotComponent.cpp:153
msgid "All"
msgstr "全部"
#: kpilot/pilotDaemon.cpp:157
msgid "Start &KPilot"
msgstr "啟動 KPilot(&K)"
#: kpilot/pilotDaemon.cpp:159
msgid "&Configure KPilot..."
msgstr "設定 KPilot(&C)..."
#: kpilot/pilotDaemon.cpp:164
msgid ""
"_: Appended to names of sync types to indicate the sync will happen just one "
"time\n"
" (once)"
msgstr "(只做一次)"
#: kpilot/pilotDaemon.cpp:168
msgid "Default (%1)"
msgstr "預設(%1"
#: kpilot/pilotDaemon.cpp:185
msgid "Next &Sync"
msgstr "下一次同步(&S)"
#: kpilot/pilotDaemon.cpp:670
msgid "Next HotSync will be: %1. "
msgstr "下一次熱同步將是:%1。"
#: kpilot/pilotDaemon.cpp:902
msgid "HotSync is disabled while the screen is locked."
msgstr "螢幕鎖定時,熱同步會被關閉。"
#: kpilot/pilotDaemon.cpp:907
msgid ""
"HotSync is disabled because KPilot could not determine the state of the "
"screen saver. You can disable this security feature by unchecking the 'do "
"not sync when screensaver is active' box in the HotSync page of the "
"configuration dialog."
msgstr ""
"熱同步會被關閉,因為 KPilot 無法決定螢幕保護程式的狀態。若您堅持要這樣做,您"
"可以在設定對話框中的「熱同步」頁中,取消勾選「螢幕保護程式啟動時不要同步」。"
#: kpilot/pilotDaemon.cpp:1165 kpilot/pilotDaemon.cpp:1166
msgid "HotSync Completed.<br>"
msgstr "熱同步已完成<br>"
#: kpilot/pilotDaemon.cpp:1274
#, c-format
msgid "Next sync is %1."
msgstr "下一次同步是 %1。"
#: kpilot/pilotDaemon.cpp:1298
msgid "Device to try first"
msgstr "先試的裝置"
#: kpilot/pilotDaemon.cpp:1299
msgid "Exit instead of complaining about bad configuration files"
msgstr "若是設定檔有問題,則離開而不抱怨。"
#: kpilot/pilotDaemon.cpp:1311
msgid "KPilot Daemon"
msgstr "KPilot 守護程式"
#: kpilot/pilotDaemon.cpp:1326
msgid "Developer"
msgstr "開發者"
#: kpilot/todoEditor.cpp:48
msgid "To-do Editor"
msgstr "待辦事項編輯器"
#: kpilot/todoWidget.cpp:174
msgid "There are still %1 to-do editing windows open."
msgstr "目前仍開著 %1 待辦事項視窗。"
#: kpilot/todoWidget.cpp:178
#, c-format
msgid ""
"_n: There is still a to-do editing window open.\n"
"There are still %n to-do editing windows open."
msgstr "目前仍開著 %n 個待辦事項視窗。"
#: kpilot/todoWidget.cpp:218
msgid "<qt>Select the category of to-dos to display here.</qt>"
msgstr "<qt>選取要在此顯示的待辦事項類別。</qt>"
#: kpilot/todoWidget.cpp:225
msgid "To-do Item"
msgstr "待辦事項項目"
#: kpilot/todoWidget.cpp:243
msgid ""
"<qt>This list displays all the to-dos in the selected category. Click on one "
"to display it to the right.</qt>"
msgstr ""
"<qt>這個清單顯示所選取類別的所有待辦事項。點選其中一個,可以在右邊顯示。</qt>"
#: kpilot/todoWidget.cpp:247
msgid "To-do info:"
msgstr "待辦事項資訊:"
#: kpilot/todoWidget.cpp:262
msgid "<qt>You can edit a to-do when it is selected.</qt>"
msgstr "<qt>您可以選取並編輯待辦事項。</qt>"
#: kpilot/todoWidget.cpp:270
msgid "<qt>Add a new to-do to the to-do list.</qt>"
msgstr "<qt>新增待辦事項到清單中。</qt>"
#: kpilot/todoWidget.cpp:271
msgid ""
"<qt><i>Adding new to-dos is disabled by the 'internal editors' setting.</i></"
"qt>"
msgstr "<qt><i>「內部編輯器」設定關閉新增待辦事項功能。</i></qt>"
#: kpilot/todoWidget.cpp:280
msgid "<qt>Delete the selected to-do from the to-do list.</qt>"
msgstr "<qt>從清單中刪除所選取的待辦事項。</qt>"
#: kpilot/todoWidget.cpp:408
msgid ""
"You cannot add to-dos to the to-do list until you have done a HotSync at "
"least once to retrieve the database layout from your Pilot."
msgstr ""
"您必須至少執行一次熱同步,從您的 Pilot 上取得資料庫佈局之後,您才能夠開始新增"
"待辦事項。"
#: kpilot/todoWidget.cpp:411
msgid "Cannot Add New To-do"
msgstr "無法新增待辦事項"
#: lib/actionQueue.cpp:136
msgid ""
"The connection to the handheld was lost. Synchronization cannot continue."
msgstr "已遺失與掌上型裝置的連線。無法繼續同步。"
#: lib/actions.cpp:54
msgid "KPilot %1 HotSync starting...\n"
msgstr "KPilot %1 熱同步開始...\n"
#: lib/actions.cpp:56
msgid "Using encoding %1 on the handheld."
msgstr "在掌上型裝置使用編碼 %1。"
#: lib/actions.cpp:67
msgid "KPilot is busy and cannot process the HotSync right now."
msgstr "KPilot 忙碌中,無法即時處理熱同步。"
#: lib/actions.cpp:114
msgid "Testing.\n"
msgstr "測試中。\n"
#: lib/actions.cpp:130
msgid "Syncing database %1..."
msgstr "同步資料庫 %1..."
#: lib/kpilotdevicelink.cpp:148
msgid "Could not open device: %1 (will retry)"
msgstr "無法開啟裝置:%1會再重試"
#: lib/kpilotdevicelink.cpp:187
msgid "Trying to open device %1..."
msgstr "試著開啟裝置 %1..."
#: lib/kpilotdevicelink.cpp:241
msgid "Already listening on that device"
msgstr "該裝置已經開始運作了"
#: lib/kpilotdevicelink.cpp:261
msgid "Cannot create socket for communicating with the Pilot (%1)"
msgstr "無法建立與 Pilot %1 連繫的 socket"
#: lib/kpilotdevicelink.cpp:289
msgid "Cannot open Pilot port \"%1\". "
msgstr "無法開啟 Pilot 連接埠 %1。"
#: lib/kpilotdevicelink.cpp:391
msgid "Cannot listen on Pilot socket (%1)"
msgstr "無法監聽 Pilot Socket%1"
#: lib/kpilotdevicelink.cpp:411 lib/kpilotdevicelink.cpp:426
msgid "Cannot accept Pilot (%1)"
msgstr "無法接收 Pilot%1"
#: lib/kpilotdevicelink.cpp:427
msgid "already connected"
msgstr "已連線"
#: lib/kpilotdevicelink.cpp:441
msgid "Unable to read system information from Pilot"
msgstr "無法從 Pilot 讀取系統資訊"
#: lib/kpilotdevicelink.cpp:478
msgid "Checking last PC..."
msgstr "檢查上一個 PC..."
#: lib/kpilotdevicelink.cpp:487
msgid ""
"Could not read user information from the Pilot. Perhaps you have a password "
"set on the device?"
msgstr "無法從 Pilot 讀取使用者資訊。也許您在該裝置上設了密碼?"
#: lib/kpilotdevicelink.cpp:670
msgid "The Pilot device is not configured yet."
msgstr "尚未設定 Pilot 裝置。"
#: lib/kpilotdevicelink.cpp:709
msgid "Pilot device %1 is not read-write."
msgstr "無法讀寫 Pilot 裝置 %1。"
#: lib/kpilotdevicelink.cpp:719
msgid ""
"Pilot device %1 does not exist. Probably it is a USB device and will appear "
"during a HotSync."
msgstr "Pilot 裝置 %1 不存在。也許它是 USB 裝置,在熱同步時會出現。"
#: lib/kpilotdevicelink.cpp:765 lib/kpilotdevicelink.cpp:774
msgid "<qt>Cannot install the file &quot;%1&quot;.</qt>"
msgstr "<qt>無法安裝檔案 %1。</qt>"
#: lib/kpilotdevicelink.cpp:846
msgid "End of HotSync\n"
msgstr "熱同步結束\n"
#: lib/kpilotdevicelinkPrivate.h:307
msgid " The port does not exist."
msgstr "此連接埠不存在。"
#: lib/kpilotdevicelinkPrivate.h:310
msgid " There is no such device."
msgstr "找不到裝置。"
#: lib/kpilotdevicelinkPrivate.h:313
msgid " You do not have permission to open the Pilot device."
msgstr "您沒有開啟 Pilot 裝置的權限。"
#: lib/kpilotdevicelinkPrivate.h:317
msgid " Check Pilot path and permissions."
msgstr "請檢查 Pilot 路徑與權限。"
#: lib/pilotDateEntry.cpp:179
#, c-format
msgid "Start date: %1"
msgstr "開始日期:%1"
#: lib/pilotDateEntry.cpp:185
msgid "Whole-day event"
msgstr "全天事件"
#: lib/pilotDateEntry.cpp:193
#, c-format
msgid "End date: %1"
msgstr "結束日期:%1"
#: lib/pilotDateEntry.cpp:200
msgid ""
"_: %1 is the duration, %2 is the time unit\n"
"Alarm: %1 %2 before event starts"
msgstr "警告:%1 %2 在事件開始之前"
#: lib/pilotDateEntry.cpp:204
msgid "minutes"
msgstr "分鐘"
#: lib/pilotDateEntry.cpp:205
msgid "hours"
msgstr "小時"
#: lib/pilotDateEntry.cpp:206
msgid "days"
msgstr "天"
#: lib/pilotDateEntry.cpp:216
msgid "Recurrence: every %1 %2"
msgstr "循環:每 %1 %2"
#: lib/pilotDateEntry.cpp:222
msgid "day(s)"
msgstr "天"
#: lib/pilotDateEntry.cpp:223
msgid "week(s)"
msgstr "週"
#: lib/pilotDateEntry.cpp:225
msgid "month(s)"
msgstr "月"
#: lib/pilotDateEntry.cpp:226
msgid "year(s)"
msgstr "年"
#: lib/pilotDateEntry.cpp:235
msgid "Repeats indefinitely"
msgstr "永遠重覆"
#: lib/pilotDateEntry.cpp:240
#, c-format
msgid "Until %1"
msgstr "直到 %1"
#: lib/pilotDateEntry.cpp:244
msgid "Repeating on the i-th day of week j"
msgstr "在第幾週的第幾天重覆"
#: lib/pilotDateEntry.cpp:245
msgid "Repeating on the n-th day of the month"
msgstr "在一個月裡的第幾天重覆"
#: lib/pilotDateEntry.cpp:263
msgid "Exceptions:"
msgstr "例外:"
#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
msgid "<b><em>Note:</em></b><br>"
msgstr "<b><em>注意:</em></b><br>"
#: lib/pilotDateEntry.cpp:277 lib/pilotTodoEntry.cpp:158
msgid "Note:\n"
msgstr "注意:\n"
#: lib/pilotMemo.cpp:81
msgid ""
"<i>Title:</i> %1<br>\n"
"<i>MemoText:</i><br>%2"
msgstr ""
"<i>標題:</i>%1<br>\n"
"<i>備忘文字:</i><br>%2"
#: lib/pilotMemo.cpp:86
msgid ""
"Title: %1\n"
"MemoText:\n"
"%2"
msgstr ""
"標題:%1\n"
"備忘文字:\n"
"%2"
#: lib/pilotTodoEntry.cpp:133
msgid "Completed"
msgstr "已完成"
#: lib/pilotTodoEntry.cpp:135
msgid "Not completed"
msgstr "未完成"
#: lib/pilotTodoEntry.cpp:143
#, c-format
msgid "Due date: %1"
msgstr "到期日:%1"
#: lib/pilotTodoEntry.cpp:151
#, c-format
msgid "Priority: %1"
msgstr "優先等級:%1"
#: lib/plugin.cpp:73
msgid "Unnamed"
msgstr "未命名"
#: lib/plugin.cpp:93
msgid ""
"<qt>The <i>%1</i> conduit's settings have been changed. Do you want to save "
"the changes before continuing?</qt>"
msgstr "<qt>導管 %1 的設定已變更。您要儲存此變更嗎?</qt>"
#: lib/plugin.cpp:105
msgid "%1 Conduit"
msgstr "導管 %1"
#: lib/plugin.cpp:144
msgid "Send questions and comments to tdepim-users@kde.org"
msgstr "請將問題與意見送到 tdepim-users@kde.org"
#: lib/plugin.cpp:194
msgid "Send questions and comments to <a href=\"mailto:%1\">%2</a>."
msgstr "請將問題與意見送到 <a href=\"mailto:%1\">%2</a>。"
#: lib/plugin.cpp:198
msgid "Send bug reports to <a href=\"mailto:%1\">%2</a>."
msgstr "請將錯誤回報到 <a href=\"mailto:%1\">%2</a>。"
#: lib/plugin.cpp:202
msgid ""
"For trademark information, see the <a href=\"help:/kpilot/trademarks.html"
"\">KPilot User's Guide</a>."
msgstr ""
"關於商標資訊,請參考 <a href=\"help:/kpilot/trademarks.html\">KPilot 使用者指"
"南</a>。"
#: lib/plugin.cpp:213
msgid "<b>Authors:</b> "
msgstr "<b>作者:</b> "
#: lib/plugin.cpp:234
msgid "<b>Credits:</b> "
msgstr "<b>致謝:</b> "
#: lib/plugin.cpp:480
msgid "Large Changes Detected"
msgstr "偵測到許多變更"
#: lib/plugin.cpp:482
msgid ""
"The %1 conduit has made a large number of changes to your %2. Do you want "
"to allow this change?\n"
"Details:\n"
"\t%3"
msgstr ""
"導管 %1 做了許多變更到您的 %2。您同意此變更嗎\n"
"詳情:\n"
"\t%3"
#: lib/plugin.cpp:536
#, c-format
msgid "Could not find conduit %1."
msgstr "找不到導管 %1。"
#: lib/plugin.cpp:559
#, c-format
msgid "Could not load conduit %1."
msgstr "無法載入導管 %1。"
#: lib/plugin.cpp:571
msgid "Conduit %1 has wrong version (%2)."
msgstr "導管 %1 的版本(%2錯誤"
#: lib/plugin.cpp:581
#, c-format
msgid "Could not initialize conduit %1."
msgstr "無法初始化導管 %1。"
#: lib/plugin.cpp:594 lib/plugin.cpp:603
#, c-format
msgid "Could not create conduit %1."
msgstr "無法建立導管 %1。"
#: lib/plugin.cpp:607
msgid "[Conduit %1]"
msgstr "【導管 %1】"
#: lib/plugin.cpp:749
msgid "Start: %1. End: %2. "
msgstr "開始:%1結束%2。"
#: lib/plugin.cpp:751
msgid "%1 new. "
msgstr "%1 新增。"
#: lib/plugin.cpp:752
msgid "%1 changed. "
msgstr "%1 已變更。"
#: lib/plugin.cpp:753
msgid "%1 deleted. "
msgstr "%1 已刪除。"
#: lib/plugin.cpp:755
msgid "No changes made. "
msgstr "沒有做任何變更。"
#: lib/recordConduit.cpp:69 lib/recordConduit.cpp:289
msgid "Unable to open the %1 database on the handheld."
msgstr "無法在掌上型裝置開啟資料庫 %1。"
#: lib/recordConduit.cpp:295
#, c-format
msgid "Unable to open %1."
msgstr "無法開啟 %1。"
#: lib/syncAction.cpp:103
msgid "The conduit %1 could not be executed."
msgstr "導管 %1 無法被執行。"
#: lib/syncAction.cpp:205
msgid "Full Synchronization"
msgstr "完整同步"
#: lib/syncAction.cpp:209
msgid "Restore From Backup"
msgstr "從備份還原"
#: lib/syncAction.cpp:220
msgid "Test Sync"
msgstr "測試同步"
#: lib/syncAction.cpp:224
msgid "Local Sync"
msgstr "本地端同步"
#: lib/syncAction.cpp:316 lib/syncAction.cpp:428
msgid "Question"
msgstr "問題"
#: lib/syncAction.cpp:335 lib/syncAction.cpp:448
msgid "&Do not ask again"
msgstr "不要再詢問我(&D)"
#: lib/syncAction.cpp:369 lib/syncAction.cpp:481
msgid "Do not ask again"
msgstr "不要再詢問"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:18
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:32
#, no-c-format
msgid "KPilot Custom Fields"
msgstr "KPilot 自訂欄位"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:35
#, no-c-format
msgid ""
"On your handheld, each address also provides four custom fields for your "
"personal use. KPilot can sync these either to birthdate, URL, IM address, or "
"just store them as a custom field on your PC with no special meaning. In the "
"last case, you can change the values here. Note, however, that for all other "
"settings the values entered here will have no effect."
msgstr ""
"在您的掌上型裝置上每個位址會提供四個自訂欄位給您個人使用。KPilot 可以將這些"
"欄位與生日、網址、即時通訊地址同步,或是單純儲存成自訂的值。在單純儲存成自訂"
"值的狀況下,您可以在此修改它的值。不過要注意的是,對其它設定來講,此地輸入的"
"值將沒有任何作用。"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:46
#, no-c-format
msgid "Custom &3:"
msgstr "自訂 3(&3)"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:52
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:74
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the third custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
"<qt>在此編輯或輸入第三個自訂欄位的值。若您使用 KPilot您可以將這些值與掌上型"
"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:60
#, no-c-format
msgid "Custom &4:"
msgstr "自訂 4(&4)"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:66
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:90
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the fourth custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
"<qt>在此編輯或輸入第四個自訂欄位的值。若您使用 KPilot您可以將這些值與掌上型"
"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:82
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:104
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the second custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
"<qt>在此編輯或輸入第二個自訂欄位的值。若您使用 KPilot您可以將這些值與掌上型"
"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:98
#, no-c-format
msgid "Custom &2:"
msgstr "自訂 2(&2)"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:112
#, no-c-format
msgid "Custom &1:"
msgstr "自訂 1(&1)"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:118
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:134
#, no-c-format
msgid ""
"<qt>Edit or enter the value of the first custom field here. Using KPilot, "
"you can synchronize these values with the handheld's Address application "
"custom fields.</qt>"
msgstr ""
"<qt>在此編輯或輸入第一個自訂欄位的值。若您使用 KPilot您可以將這些值與掌上型"
"裝置的通訊錄應用程式中的自訂欄位同步。</qt>"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:142
#, no-c-format
msgid ""
"If you let KPilot sync the handheld's custom fields as custom fields on the "
"PC, you can change the values here. Note, however, that for all other "
"settings the values entered here will have no effect."
msgstr ""
"如果您打算使用 KPilot 將掌上型裝置裡的自訂欄位同步為 PC 上的自訂欄位,您可以"
"在此變更這些值。不過要注意的是,對其它設定來講,此地輸入的值將沒有任何作用。"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:158
#, no-c-format
msgid "KPilot's Private (meta-sync) Settings"
msgstr "KPilot 的私人meta-sync設定"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:169
#, no-c-format
msgid "Record&ID:"
msgstr "紀錄代碼(&I)"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:180
#, no-c-format
msgid "Sync &flag:"
msgstr "同步旗標(&F)"
#: conduits/abbrowserconduit/KPilotCustomFieldEditor.ui:225
#, no-c-format
msgid ""
"These values indicate the state of the record for KPilot, and connect an "
"entry on the handheld with an entry on the PC.\n"
"Do NOT change these values: doing so will almost certainly result in data "
"loss when you next do a sync."
msgstr ""
"這些值表示 KPilot 的紀錄狀態,並將 PC 上的項目與掌上型裝置的項目連接起來。請"
"不要變更這些值,如此會導致在下一次同步時資料遺失。"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:66
#: conduits/vcalconduit/korganizerConduit.ui:94
#, no-c-format
msgid "Sync Destination"
msgstr "同步目的地"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:77
#, no-c-format
msgid "&Standard addressbook"
msgstr "標準通訊錄(&S)"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:80
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with TDE's standard addressbook (i.e. "
"the addressbook that you edit in KAddressBook, and which you use in KMail)</"
"qt>"
msgstr ""
"<qt>選擇此選項的話,會與 TDE 的標準通訊錄(也就是 KAddressBook 與 KMail 中使"
"用的通訊錄)同步。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:91
#, no-c-format
msgid "vCard &file:"
msgstr "vCard 檔案(&F)"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:94
#, no-c-format
msgid ""
"<qt>Select this option to use a specific address book file, instead of the "
"standard TDE address book. This file must be in the vCard format (.vcf). "
"Type the location of this file in the edit box or select it clicking the "
"file picker button.</qt>"
msgstr ""
"<qt>選擇此選項的話,會使用特別的通訊錄檔案,而不使用標準 TDE 通訊錄來同步。這"
"個檔必須是 vCard 格式(.vcf。您可以在此輸入此檔案的位置或直接點選檔案挑選"
"器按鈕來挑選。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:113
#, no-c-format
msgid ""
"<qt>Enter the vCard file name here or select it by clicking the file picker "
"button. vCard is a standard format for exchanging contact information. </qt>"
msgstr ""
"<qt>您可以在此輸入 vCard 檔案的名稱或直接點選檔案挑選器按鈕來挑選。vCard 是"
"交換聯絡人資訊時的標準格式。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:123
#, no-c-format
msgid "Store &archived records in the TDE addressbook"
msgstr "在 TDE 通訊錄中儲存已歸檔的紀錄(&A)"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:126
#, no-c-format
msgid ""
"<qt>If you delete an address on your handheld, you can determine if it "
"should be archived on the PC. If you check that and this checkbox, the "
"address will be added to your addressbook, but no longer synchronized with "
"the handheld.</qt>"
msgstr ""
"<qt>如果您從您的掌上型裝置中刪除一個位址,您可以決定是否要將它歸檔到 PC 上。"
"如果您勾選此選項,則此位址會被加到您的通訊錄中,但不會再同步到您的掌上型裝置"
"中。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:136
#: conduits/docconduit/doc-setupdialog.ui:390
#: conduits/vcalconduit/korganizerConduit.ui:165
#, no-c-format
msgid "Conflicts"
msgstr "衝突"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:166
#: conduits/vcalconduit/korganizerConduit.ui:184
#: kpilot/kpilotConfigDialog_sync.ui:148
#, no-c-format
msgid "Conflict &resolution:"
msgstr "解決衝突(&R)"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:172
#: conduits/abbrowserconduit/kaddressbookConduit.ui:218
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited "
"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
"entry on both the PC and handheld.</qt>"
msgstr ""
"<qt>在此清單中選擇要如何處理衝突的項目(您在掌上型裝置跟 PC 中都有修改的項"
"目)。可用的選項包括:「使用 KPilot 全域設定」會直接使用在 KPilot 熱同步設定"
"中的設定;「詢問使用者」則會每次都詢問使用者的意見;「不做任何事」就是維持原"
"狀還有「PC 覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等,最後「兩個"
"項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:178
#: conduits/vcalconduit/korganizerConduit.ui:193
#, no-c-format
msgid "Use KPilot's Global Setting"
msgstr "使用 KPilot 全域設定"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:183
#: conduits/vcalconduit/korganizerConduit.ui:198
#: kpilot/kpilotConfigDialog_sync.ui:100
#, no-c-format
msgid "Ask User"
msgstr "詢問使用者"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:188
#: conduits/vcalconduit/korganizerConduit.ui:203
#: kpilot/kpilotConfigDialog_sync.ui:105
#, no-c-format
msgid "Do Nothing"
msgstr "不做任何事"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:193
#: conduits/vcalconduit/korganizerConduit.ui:208
#: kpilot/kpilotConfigDialog_sync.ui:110
#, no-c-format
msgid "Handheld Overrides"
msgstr "掌上型裝置覆寫"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:198
#: conduits/vcalconduit/korganizerConduit.ui:213
#: kpilot/kpilotConfigDialog_sync.ui:115
#, no-c-format
msgid "PC Overrides"
msgstr "PC 覆寫"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:203
#: conduits/vcalconduit/korganizerConduit.ui:218
#: kpilot/kpilotConfigDialog_sync.ui:120
#, no-c-format
msgid "Values From Last Sync (if possible)"
msgstr "最後一次同步的值(可以的話)"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:208
#: conduits/vcalconduit/korganizerConduit.ui:223
#: kpilot/kpilotConfigDialog_sync.ui:125
#, no-c-format
msgid "Use Both Entries"
msgstr "兩個項目都使用"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:226
#, no-c-format
msgid ""
"<p>Select the default action if an event was modified on both sides here. </"
"p>"
msgstr "<p>在此選擇事件在兩邊變更後的預設動作。</p>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:258
#, no-c-format
msgid "Fields"
msgstr "欄位"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:275
#, no-c-format
msgid "Handheld other phone:"
msgstr "掌上型裝置中的其他電話欄位:"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:278
#: conduits/abbrowserconduit/kaddressbookConduit.ui:334
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Pilot's "
"&quot;Other&quot; phone here.</qt>"
msgstr ""
"<qt>選擇 Pilot 裡的「其他」電話要儲存在 KAddressBook 裡的哪個欄位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:284
#, no-c-format
msgid "Other Phone"
msgstr "其他電話"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:289
#, no-c-format
msgid "Assistant"
msgstr "助理"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:294
#: conduits/abbrowserconduit/kaddressbookConduit.ui:385
#, no-c-format
msgid "Business Fax"
msgstr "工作傳真"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:299
#, no-c-format
msgid "Car Phone"
msgstr "車上電話"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:304
#, no-c-format
msgid "Email 2"
msgstr "電子郵件地址 2"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:309
#: conduits/abbrowserconduit/kaddressbookConduit.ui:380
#, no-c-format
msgid "Home Fax"
msgstr "家用傳真"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:314
#, no-c-format
msgid "Telex"
msgstr "電報"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:319
#, no-c-format
msgid "TTY/TTD Phone"
msgstr "TTY/TTD 電話"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:342
#, no-c-format
msgid "Handheld street address:"
msgstr "掌上型街道地址:"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:345
#: conduits/abbrowserconduit/kaddressbookConduit.ui:363
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Pilot's "
"Street Address here.</qt>"
msgstr "<qt>選擇 Pilot 中的街道地址要儲存在 KAddressBook 中的哪個欄位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:351
#, no-c-format
msgid "Preferred, then Home Address"
msgstr "先使用預設的,然後住家地址"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:356
#, no-c-format
msgid "Preferred, then Business Address"
msgstr "先使用預設的,然後商業地址"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:371
#, no-c-format
msgid "Handheld fax:"
msgstr "掌上型裝置中的傳真欄位:"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:374
#: conduits/abbrowserconduit/kaddressbookConduit.ui:392
#, no-c-format
msgid ""
"<qt>Select which KAddressBook field should be used to store the Fax number "
"from the Pilot here.</qt>"
msgstr "<qt>選擇 Pilot 中的傳真號碼要儲存在 KAddressBook 中的哪個欄位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:419
#, no-c-format
msgid "Custom Fields"
msgstr "自訂欄位"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:438
#, no-c-format
msgid "Handheld custom field 1:"
msgstr "掌上型裝置中的自訂欄位 1"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:441
#: conduits/abbrowserconduit/kaddressbookConduit.ui:510
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the first custom field on your handheld.</qt>"
msgstr ""
"<qt>從這份清單中,選擇您的掌上型裝置中的第一個自訂欄位應該搭配清單中的哪個欄"
"位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:449
#, no-c-format
msgid "Handheld custom field 2:"
msgstr "掌上型裝置中的自訂欄位 2"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:452
#: conduits/abbrowserconduit/kaddressbookConduit.ui:546
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the second custom field on your handheld.</qt>"
msgstr ""
"<qt>從這份清單中,選擇您的掌上型裝置中的第二個自訂欄位應該搭配清單中的哪個欄"
"位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:460
#, no-c-format
msgid "Handheld custom field 3:"
msgstr "掌上型裝置中的自訂欄位 3"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:463
#: conduits/abbrowserconduit/kaddressbookConduit.ui:582
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the third custom field on your handheld.</qt>"
msgstr ""
"<qt>從這份清單中,選擇您的掌上型裝置中的第三個自訂欄位應該搭配清單中的哪個欄"
"位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:471
#, no-c-format
msgid "Handheld custom field 4:"
msgstr "掌上型裝置中的自訂欄位 4"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:474
#: conduits/abbrowserconduit/kaddressbookConduit.ui:618
#, no-c-format
msgid ""
"<qt>Select the field from this list that represents best the meaning given "
"by your use of the fourth custom field on your handheld.</qt>"
msgstr ""
"<qt>從這份清單中,選擇您的掌上型裝置中的第四個自訂欄位應該搭配清單中的哪個欄"
"位。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:480
#: conduits/abbrowserconduit/kaddressbookConduit.ui:516
#: conduits/abbrowserconduit/kaddressbookConduit.ui:552
#: conduits/abbrowserconduit/kaddressbookConduit.ui:588
#, no-c-format
msgid "Store as Custom Field"
msgstr "儲存為自訂欄位"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:485
#: conduits/abbrowserconduit/kaddressbookConduit.ui:521
#: conduits/abbrowserconduit/kaddressbookConduit.ui:557
#: conduits/abbrowserconduit/kaddressbookConduit.ui:593
#, no-c-format
msgid "Birthdate"
msgstr "生日"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:490
#: conduits/abbrowserconduit/kaddressbookConduit.ui:526
#: conduits/abbrowserconduit/kaddressbookConduit.ui:562
#: conduits/abbrowserconduit/kaddressbookConduit.ui:598
#, no-c-format
msgid "URL"
msgstr "網址"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:495
#, no-c-format
msgid "IM Address (ICQ, MS, ...)"
msgstr "即時通訊地址ICQMS..."
#: conduits/abbrowserconduit/kaddressbookConduit.ui:531
#: conduits/abbrowserconduit/kaddressbookConduit.ui:567
#: conduits/abbrowserconduit/kaddressbookConduit.ui:603
#, no-c-format
msgid "IM Address (ICQ, MSN, ...)"
msgstr "即時通訊地址ICQMSN..."
#: conduits/abbrowserconduit/kaddressbookConduit.ui:640
#, no-c-format
msgid "Date &format:"
msgstr "日期格式(&F)"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:646
#: conduits/abbrowserconduit/kaddressbookConduit.ui:700
#, no-c-format
msgid ""
"<qt>Select the birthdate format here, if you selected \"birthdate\" for any "
"of the custom fields above. Possible placeholders are:<br> %d for the day, "
"%m for the month, %y for the two-digit year, %Y for the four-digit year. "
"For example, %d.%m.%Y would generate a date like 27.3.1952, while %m/%d/%y "
"would write the same date as 03/27/52. </qt>"
msgstr ""
"<qt>如果您在上方的任一個自訂欄位定義中選擇了「生日」,則您可以在此選擇生日的"
"格式。符號所代表的意義為:<br> %d%m%y西元年二位數%Y西元"
"年,四位數。例如,%d.%m.%Y 會將日期顯示為 27.3.1952,而 %m/%d/%y 會將日期顯示"
"為 03/27/52。</qt>"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:652
#, no-c-format
msgid "Locale Settings"
msgstr "區域化設定"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:657
#, no-c-format
msgid "%d.%m.%Y"
msgstr "%d.%m.%Y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:662
#, no-c-format
msgid "%d.%m.%y"
msgstr "%d.%m.%y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:667
#, no-c-format
msgid "%d/%m/%Y"
msgstr "%d/%m/%Y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:672
#, no-c-format
msgid "%d/%m/%y"
msgstr "%d/%m/%y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:677
#, no-c-format
msgid "%m/%d/%Y"
msgstr "%m/%d/%Y"
#: conduits/abbrowserconduit/kaddressbookConduit.ui:682
#, no-c-format
msgid "%m/%d/%y"
msgstr "%m/%d/%y"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:16
#, no-c-format
msgid "widget2"
msgstr "元件2"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:27
#, no-c-format
msgid ""
"The following record was edited both on the handheld and on the PC. Please "
"choose which values shall be synced:"
msgstr ""
"以下的紀錄同時在掌上型裝置與 PC 上都有編輯修改過。請選擇要以那個值為主來同"
"步:"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:36
#, no-c-format
msgid "Field"
msgstr "欄位"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:55
#, no-c-format
msgid ""
"<qt>Use this list to resolve, field by field, the conflicts created when a "
"record was edited both on the handheld and on the PC. For each record, the "
"different values from the last sync, the handheld and PC are displayed for "
"each field, allowing you to choose the desired value.</qt>"
msgstr ""
"<qt>當某一筆紀錄同時在 PC 與掌上型裝置中修改過的時候,依每個欄位,使用此清單"
"來解決衝突的問題。在每一筆資料的每一個欄位中,都會顯示與上一次同步後不同的"
"值,在掌上型裝置上的值與在 PC 上的值,好讓您選擇想要同步的值。</qt>"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:63
#, no-c-format
msgid ""
"Line breaks in any of the entries are denoted by a \" | \" (without the "
"quotes)."
msgstr "任何項目資料中的斷行都會以 \" | \" 來顯示(但不包括那個 \")。"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:85
#, no-c-format
msgid "&Keep Both"
msgstr "都要保留(&K)"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:88
#, no-c-format
msgid ""
"<qt>Click this button to use both values, resulting in the duplication of "
"the record.</qt>"
msgstr "<qt>點擊此按鍵就兩邊都保留,如此會複製一份紀錄。</qt>"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:96
#, no-c-format
msgid "&PC Values"
msgstr "PC 上的值(&P)"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:99
#, no-c-format
msgid ""
"<qt>Click this button to use the PC values for synchronizing all conflicting "
"fields in this record.</qt>"
msgstr "<qt>點擊此按鍵就會使用 PC 上的值來同步。</qt>"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:107
#, no-c-format
msgid "&Last Sync Values"
msgstr "最後一次同步的值(&L)"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:110
#, no-c-format
msgid ""
"<qt>Click this button to use the last sync values (old values) for "
"synchronizing all conflicting fields in this record.</qt>"
msgstr ""
"<qt>點擊此按鍵就會使用最後一次同步後的值(也就是未變更前的舊值)來同步。</qt>"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:118
#, no-c-format
msgid "&Handheld Values"
msgstr "掌上型裝置中的值(&H)"
#: conduits/abbrowserconduit/resolutionDialog_base.ui:121
#, no-c-format
msgid ""
"<qt>Click this button to use the handheld values for synchronizing all "
"conflicting fields in this record.</qt>"
msgstr "<qt>點擊此按鍵就會使用掌上型裝置中的值來同步。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:54
#, no-c-format
msgid "&Text files:"
msgstr "文字檔(&T)"
#: conduits/docconduit/doc-setupdialog.ui:60
#: conduits/docconduit/doc-setupdialog.ui:82
#, no-c-format
msgid ""
"<qt>Enter here, or select clicking the file picker button, the name and "
"location of the folder used to find and synchronize text files. All files "
"with extension .txt located in this folder will be synced to Palm DOC "
"databases in your handheld.</qt>"
msgstr ""
"<qt>您可以在此輸入要用於尋找與同步文字檔的資料夾位置,或直接點選檔案挑選器按"
"鈕來挑選。所有在此資料夾中以 .txt 為副檔名的檔案,都會被您掌上型裝置中的 "
"Palm DOC 資料庫裡的資料同步。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:68
#, no-c-format
msgid "Local co&py:"
msgstr "本地端複製(&P)"
#: conduits/docconduit/doc-setupdialog.ui:74
#, no-c-format
msgid ""
"<qt>Check this box if you want to save a copy of the Palm DOC databases (."
"pdb files) on your PC.</qt>"
msgstr ""
"<qt>勾選此選項的話,會儲存一份 Palm DOC 資料庫檔案(*.pdb到您的 PC 上。</"
"qt>"
#: conduits/docconduit/doc-setupdialog.ui:90
#, no-c-format
msgid "Synchronization Mode"
msgstr "同步模式"
#: conduits/docconduit/doc-setupdialog.ui:107
#, no-c-format
msgid "Sync only P&C to PDA"
msgstr "只從 PC 同步到 PDA(&C)"
#: conduits/docconduit/doc-setupdialog.ui:113
#, no-c-format
msgid ""
"<qt>Select this option to synchronize texts changed in your PC to Palm DOC "
"databases in your handheld. Palm DOC databases modified in the handheld will "
"not be converted to text files, but texts changed in the PC will be "
"converted to the Palm DOC databases.</qt>"
msgstr ""
"<qt>選取此選項的話,會將您的 PC 中的文字檔變更同步到您的掌上型裝置的 Palm "
"DOC 資料庫中。Palm DOC 資料庫的變更不會轉換為文字檔,但是在 PC 中的變更的文字"
"會被轉換到 Palm DOC 資料庫中。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:121
#, no-c-format
msgid "Sync only P&DA to PC"
msgstr "只從 PDA 同步到 PC(&D)"
#: conduits/docconduit/doc-setupdialog.ui:124
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the changes made to Palm DOC databases "
"in your handheld to the PC text files. Palm DOC databases modified in the "
"handheld will be converted to text files, but texts changed in the PC will "
"not be converted to the Palm DOC databases.</qt>"
msgstr ""
"<qt>選取此選項的話,會將您的掌上型裝置的 Palm DOC 資料庫的變更同步到您的 PC "
"的文字檔中。Palm DOC 資料庫的變更會轉換為文字檔,但是在 PC 中的變更的文字不會"
"被轉換到 Palm DOC 資料庫中。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:132
#, no-c-format
msgid "Sync &all"
msgstr "全部同步(&A)"
#: conduits/docconduit/doc-setupdialog.ui:141
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the file texts in your PC to Palm DOC "
"databases in your handheld. Palm DOC databases modified in the handheld will "
"be converted to text files, and texts changed in the PC will be converted to "
"the Palm DOC databases, keeping both versions in sync.</qt>"
msgstr ""
"<qt>選取此選項的話,會將您的掌上型裝置的 Palm DOC 資料庫與您的 PC 的文字檔做"
"雙向同步。Palm DOC 資料庫的變更會轉換為文字檔,在 PC 中的變更的文字也會被轉換"
"到 Palm DOC 資料庫中,讓兩邊的版本保持一致。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:168
#, no-c-format
msgid ""
"<qt>Enter here, or select clicking the file picker button, the name and "
"location of the folder where copies of the handheld databases are kept (.pdb "
"files). Local copies are only made if the box is checked as well.</qt>"
msgstr ""
"<qt>您可以在此輸入要保存掌上型裝置資料庫檔案(*.pdb複本的資料夾位置或直接"
"點選檔案挑選器按鈕來挑選。若同時勾選此選項的話,會順便做複製的動作。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:178
#: conduits/docconduit/kpalmdoc_dlgbase.ui:168
#, no-c-format
msgid "PC -> Handheld"
msgstr "PC 到掌上型裝置"
#: conduits/docconduit/doc-setupdialog.ui:189
#: conduits/docconduit/kpalmdoc_dlgbase.ui:255
#, no-c-format
msgid "&Compress"
msgstr "壓縮(&C)"
#: conduits/docconduit/doc-setupdialog.ui:195
#: conduits/docconduit/kpalmdoc_dlgbase.ui:261
#, no-c-format
msgid ""
"Check this box, if the text should be compressed on the handheld to save "
"memory. Most doc reader on the handheld support compressed texts."
msgstr ""
"勾選此選項的話,會將掌上型裝置中的文字做壓縮以節省記憶體。大部份在掌上型裝置"
"的文件閱讀器都支援壓縮的功能。"
#: conduits/docconduit/doc-setupdialog.ui:198
#, no-c-format
msgid ""
"<qt>The Palm DOC format supports compressing the text to save memory. Check "
"this box to enable text compression, so the resulting Palm DOC database will "
"consume about 50% less memory than in uncompressed state. Almost all DOC "
"readers on the Palm support compressed texts.</qt>"
msgstr ""
"<qt>Palm DOC 格式支援壓縮文字以節省記憶體的功能。勾選此選項以開啟此功能,讓 "
"Palm DOC 資料庫可以節省約 50% 左右的記憶體。大部份在掌上型裝置的文件閱讀器都"
"支援壓縮的功能。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:206
#: conduits/docconduit/kpalmdoc_dlgbase.ui:272
#, no-c-format
msgid "Convert &bookmarks"
msgstr "轉換書籤(&B)"
#: conduits/docconduit/doc-setupdialog.ui:212
#, no-c-format
msgid ""
"<qt>Check this box to enable bookmark creation when converting text files to "
"Palm DOC databases. Most doc readers support bookmarks. In order to create a "
"bookmark, it is necessary to to provide the location in the text where the "
"bookmark should be set and the bookmark title, in at least one of the "
"formats listed below.</qt>"
msgstr ""
"<qt>勾選此選項的話,在轉換文字檔到 Palm DOC 資料庫時會開啟建立書籤的功能。大"
"部份的文件閱讀器都支援書籤。要建立書籤,至少需要以下面列出的一種格式提供書籤"
"設定的位置,以及書籤的標題。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:237
#: conduits/docconduit/kpalmdoc_dlgbase.ui:230
#, no-c-format
msgid "&Inline tags in text"
msgstr "文字中的內含標籤(&I)"
#: conduits/docconduit/doc-setupdialog.ui:243
#, no-c-format
msgid ""
"Check this box to create bookmarks from inline tags in the text. The inline "
"tag consist of tags in the form <* bookmarktext *>. The bookmark location is "
"set using the location of the inline tag in the text, and the name is the "
"text between the <* and the *>. The inline tag (<*...*>) will be removed "
"from the text."
msgstr ""
"勾選此選項的話,會從文字中的內含標籤來建立書籤。內含標籤包含了此格式 <* "
"bookmarktext *> 的標籤。書籤的位置會用文字中的內含標籤的位置,標題名稱則用 "
"<* 與 *> 間的文字。最後此標籤(<* ... *>)會從文字中移除。"
#: conduits/docconduit/doc-setupdialog.ui:251
#: conduits/docconduit/kpalmdoc_dlgbase.ui:155
#, no-c-format
msgid "&Encoding:"
msgstr "編碼(&E)"
#: conduits/docconduit/doc-setupdialog.ui:262
#: conduits/docconduit/kpalmdoc_dlgbase.ui:244
#, no-c-format
msgid "&Tags at end of text"
msgstr "文字結束的標籤(&T)"
#: conduits/docconduit/doc-setupdialog.ui:265
#, no-c-format
msgid ""
"Check this box to convert tags of the form <bookmarkname> at the end of the "
"text to bookmarks. The text inside the tag (\"bookmarkname\") will be "
"searched in the text, and whenever found, a bookmark will be set there. The "
"endtags <...> will then be removed from the end of the text."
msgstr ""
"勾選此選項的話,會將文字結尾的 <bookmarkname> 標籤轉換為書籤。它會搜尋在標籤"
"中的文字(\"bookmarkname\"),找到之後會將書籤設定在那裡。最後會將結束標籤 "
"<...> 從文字尾端移除。"
#: conduits/docconduit/doc-setupdialog.ui:273
#: conduits/docconduit/kpalmdoc_dlgbase.ui:286
#, no-c-format
msgid "Regular &expressions in .bmk file"
msgstr ".bmk 檔中的正規表示式(&E)"
#: conduits/docconduit/doc-setupdialog.ui:276
#, no-c-format
msgid ""
"<qt>Check this box to use regular expressions in a file to search the text "
"for bookmarks. The file should have the same name as the text file, but "
"should end in .bmk instead of .txt (for instance, the regular expression "
"file for textname.txt should be textname.bmk). See the documentation for a "
"description of the format of the bmk file.</qt>"
msgstr ""
"<qt>勾選此選項的話,會使用檔案中的正規表示式來搜尋文字以建立書籤。此檔的檔名"
"要與文字檔一樣,但是將副檔名換為 .bmk例如textname.txt 檔的書籤正規表示式"
"檔應該要叫做 textname.bmk。bmk 檔的格式請參考文件說明。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:291
#: conduits/docconduit/kpalmdoc_dlgbase.ui:316
#, no-c-format
msgid "Handheld -> PC"
msgstr "掌上型裝置到 PC"
#: conduits/docconduit/doc-setupdialog.ui:319
#, no-c-format
msgid "Do not convert, if text unchanged (only bookmarks)"
msgstr "如果文字未變更(只變更書籤時)就不轉換"
#: conduits/docconduit/doc-setupdialog.ui:322
#, no-c-format
msgid ""
"<qt>Check this box to avoid syncing the text on the handheld to the PC if "
"you only changed the bookmarks on the handheld (but not the text).</qt>"
msgstr ""
"<qt>勾選此選項的話,若您只變更掌上型裝置文件的書籤(但沒有變更文字內容),則"
"不會同步到 PC 上。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:330
#: conduits/docconduit/kpalmdoc_dlgbase.ui:344
#, no-c-format
msgid "Convert Bookmarks"
msgstr "轉換書籤"
#: conduits/docconduit/doc-setupdialog.ui:341
#: conduits/docconduit/kpalmdoc_dlgbase.ui:372
#, no-c-format
msgid "Do &not convert bookmarks"
msgstr "不轉換書籤(&N)"
#: conduits/docconduit/doc-setupdialog.ui:347
#, no-c-format
msgid ""
"<qt>Check this box to avoid converting Palm DOC bookmarks to inline tags or "
"to a bookmark file.</qt>"
msgstr "<qt>勾選此選項以避免將 Palm DOC 書籤轉換為內含標籤或書籤檔。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:355
#, no-c-format
msgid "Convert into .bm &file"
msgstr "轉換為 .bm 檔(&F)"
#: conduits/docconduit/doc-setupdialog.ui:364
#, no-c-format
msgid ""
"<qt>Check this box to convert the Palm DOC database bookmarks to a separate "
"file, in the bmk format (see more about this format in the documentation). "
"The resulting bookmark file shares the same filename as the resulting .txt "
"file, but ends in .bmk instead. This approach creates a clean text file and "
"a bookmark file.</qt>"
msgstr ""
"<qt>勾選此選項的話,則會將 Palm DOC 資料庫書籤以 bmk 格式轉換到不同的檔案中"
"(關於 bmk 格式請參考文件說明)。結果的書籤檔會與文字檔的檔名相同,只有副檔名"
"換成 .bmk。這會建立一個乾淨的文字檔與書籤檔。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:372
#: conduits/docconduit/kpalmdoc_dlgbase.ui:358
#, no-c-format
msgid "Convert as &inline tags"
msgstr "轉換為內含標籤(&I)"
#: conduits/docconduit/doc-setupdialog.ui:378
#, no-c-format
msgid ""
"<qt>Check this box to convert the Palm DOC database bookmarks to inline "
"tags, in the form &lt;* BookmarkName *&gt;. These tags are inserted in the "
"text in the position marked by the bookmark, and the text inside the tag "
"corresponds to the bookmark name. Inline tags are easy to create, delete, "
"move and edit.</qt>"
msgstr ""
"<qt>勾選此選項會將 Palm DOC 資料庫的書籤轉換為 &lt;* BookmarkName *&gt; 的內"
"含標籤。這些標籤會安插在書籤所標示的位置上,標籤內的文字會使用書籤的名稱。內"
"含標籤比較容易建立、刪除、移動與編輯。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:404
#, no-c-format
msgid ""
"If the same text was changed on the PC and the handheld, which of the two "
"versions should be used as the new version?"
msgstr ""
"如果同樣的文字,在 PC 與掌上型裝置中都做了變更,則要以哪個版本為主來同步?"
#: conduits/docconduit/doc-setupdialog.ui:407
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, the "
"choice is between working with the files out of sync, or discarding the "
"changes in one of them.</qt>"
msgstr ""
"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您"
"必須選擇要使用哪一邊的版本,或是兩個都不要。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:418
#, no-c-format
msgid "&No resolution"
msgstr "不解決(&N)"
#: conduits/docconduit/doc-setupdialog.ui:424
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to prevent "
"KPilot from overwriting your modifications.</qt>"
msgstr ""
"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您"
"必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則 KPilot 不會去處理"
"與覆寫您的變更。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:432
#, no-c-format
msgid "P&DA overrides"
msgstr "PDA 覆寫(&D)"
#: conduits/docconduit/doc-setupdialog.ui:438
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to make the PDA "
"version overwrite the PC version in case of conflict.</qt>"
msgstr ""
"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您"
"必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則以 PDA 的版本為主,"
"PC 端的內容將被同步,原本的變更將被丟棄。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:446
#, no-c-format
msgid "P&C overrides"
msgstr "PC 覆寫(&C)"
#: conduits/docconduit/doc-setupdialog.ui:452
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to make the PC "
"version overwrite the PDA version in case of conflict.</qt>"
msgstr ""
"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您"
"必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則以 PC 的版本為主,"
"PDA 端的內容將被同步,原本的變更將被丟棄。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:460
#, no-c-format
msgid "&Ask the user"
msgstr "詢問使用者(&A)"
#: conduits/docconduit/doc-setupdialog.ui:469
#, no-c-format
msgid ""
"<qt>The Palm DOC conduit does not feature merging the modifications when a "
"text is changed both in the handheld and in the computer. Therefore, when "
"conflicts appear, the choice is between working with the files out of sync, "
"or discarding the changes in one of them. Select this option to show the "
"resolution dialog to let the user decide on a case by case basis.</qt>"
msgstr ""
"<qt>Palm DOC 導管並沒有將 PC 與掌上型裝置同時做的變更合併起來的功能。因此,您"
"必須選擇要使用哪一邊的版本,或是兩個都不要。選取此選項,則會顯示出解決對話"
"框,讓使用者決定要怎麼做。</qt>"
#: conduits/docconduit/doc-setupdialog.ui:479
#, no-c-format
msgid "&Always show the resolution dialog"
msgstr "永遠顯示解決對話框(&A)"
#: conduits/docconduit/doc-setupdialog.ui:482
#, no-c-format
msgid ""
"<qt>Check this box to force the resolution dialog to appear even when there "
"are no conflicts.</qt>"
msgstr "<qt>勾選此選項以強制解決對話框出現,即使沒有衝突也一樣。</qt>"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:47
#, no-c-format
msgid "&PalmDOC file:"
msgstr "PalmDOC 檔案(&P)"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:77
#, no-c-format
msgid "Convert whole &folders"
msgstr "轉換整個資料夾(&F)"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:85
#, no-c-format
msgid ""
"Folder where copies of the handheld databases are kept. You can install them "
"to any PalmOS handheld, and distribute these copies to other people (but "
"beware of copyright infringement)."
msgstr ""
"掌上型裝置中的資料庫要複製到哪個資料夾。您可以安裝這些複本到任何 PalmOS 掌上"
"型裝置,並散布這些複本給其它人(不過請小心版權問題)。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:93
#, no-c-format
msgid "&Ask before overwriting files"
msgstr "覆寫檔案前先詢問(&A)"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:101
#, no-c-format
msgid "&Verbose messages"
msgstr "詳細訊息(&V)"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:109
#, no-c-format
msgid "Convert Text to PalmDOC"
msgstr "轉換文字到 PalmDOC"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:117
#, no-c-format
msgid "Convert PalmDOC to Text"
msgstr "轉換 PalmDOC 為文字"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:142
#, no-c-format
msgid ""
"Enter the name of the folder where the text files reside on the PC. All "
"files with extension .txt will be synced to the handheld."
msgstr ""
"輸入文字檔要放在 PC 上的資料夾名稱。所有副檔名為 .txt 的檔案都會與掌上型裝置"
"同步。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:236
#, no-c-format
msgid ""
"When a <* bookmarktext *> appears somewhere in the text, a bookmark will be "
"set at this position, and the text between the <* and the *> will be used as "
"bookmark name. The <*...*> will be removed from the text."
msgstr ""
"當 <* bookmarktext *> 出現在文字的某處時,會在該處設定一個書籤,而 <* 與 *> "
"間的文字會做為書籤的名稱。最後 <* ... *> 會從文字中移除。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:247
#, no-c-format
msgid ""
"Tags of the form <bookmarkname> at the end of the text will be used to "
"search the text for the pattern between the < and >. Whenever \"bookmarkname"
"\" appears in the text, a bookmark will be set there. The endtags <...> will "
"then be removed from the end of the text."
msgstr ""
"放在文字尾端的格式為 <bookmarkname> 的標籤會被用於搜尋在 < 與 > 間的文字。當 "
"\"bookmarkname\" 出現在文字中時,會在該處設置一個書籤。最後 <...> 的標籤會被"
"移除。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:264
#, no-c-format
msgid ""
"The Palm doc format supports compressing the text to save memory. If you "
"check this box, the text will consume about 50% less memory than in "
"uncompressed state. Almost all DOC readers on the Palm support compressed "
"texts."
msgstr ""
"Palm DOC 格式支援壓縮文字,以節省記憶體。如果您勾選此選項,會節省約 50% 的記"
"憶體。大部份 Palm 上面的文件閱讀器都支援文字壓縮。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:278
#, no-c-format
msgid ""
"Do you want to convert bookmarks? Most doc readers support bookmarks. You "
"have to provide some information about where the bookmarks should be set and "
"their titles. Check at least one of the bookmark types below."
msgstr ""
"您要轉換書籤嗎?大部份的文件閱讀器都支援書籤。您至少需要以下面列出的一種格式"
"提供書籤設定的位置,以及書籤的標題。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:289
#, no-c-format
msgid ""
"Use regular expressions in a file textname.bmk (textname.txt is the filename "
"of the text) to search the text for bookmarks.See the documentation for a "
"description of the format of the bmk file."
msgstr ""
"使用 textname.bmk 檔(文字檔名為 textname.txt中的正規表示式來搜尋要做書籤的"
"文字。bmk 檔的格式請參考文件說明。"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:386
#, no-c-format
msgid "Convert as &end tags"
msgstr "轉換為結束標記(&E)"
#: conduits/docconduit/kpalmdoc_dlgbase.ui:394
#, no-c-format
msgid "Convert into .bmk &file"
msgstr "轉換為 .bmk 檔案(&F)"
#: conduits/knotes/knotesconduit.kcfg:12
#, no-c-format
msgid "Suppress the confirmation KNotes normally shows when deleting a note."
msgstr ""
#: conduits/knotes/knotesconduit.kcfg:17
#, no-c-format
msgid "list of the synced MemoDB records"
msgstr ""
#: conduits/knotes/knotesconduit.kcfg:21
#, no-c-format
msgid "list of the corresponding KNotes note IDs"
msgstr ""
#: conduits/knotes/setup_base.ui:45
#, no-c-format
msgid "Delete KNote when Pilot memo is deleted"
msgstr "當刪除 Pilot 備忘時刪除 KNote"
#: conduits/knotes/setup_base.ui:51
#, no-c-format
msgid ""
"<qt>Check this box if you wish to delete notes from KNotes automatically "
"when the corresponding Pilot memo is deleted. Use this option with care, as "
"the notes you want to keep in the handheld and in the desktop are not "
"necessarily the same.</qt>"
msgstr ""
"<qt>勾選此選項的話,您刪除 Pilot 備忘的時候,會自動刪除 KNotes 上相關聯的備"
"忘。請小心使用此選項,因為您要保存在掌上型裝置的備忘跟您想保存在桌面上的備忘"
"不見得一樣。</qt>"
#: conduits/knotes/setup_base.ui:59
#, no-c-format
msgid "Suppress delete-confirmation in KNotes"
msgstr "刪除 KNotes 備忘時不需確認"
#: conduits/knotes/setup_base.ui:62
#, no-c-format
msgid ""
"<qt>Check this box if you wish to delete notes from KNotes, without "
"confirmation, when the corresponding Pilot memo is deleted. Use this option "
"only if you want to keep the same notes in the handheld and in the PC.</qt>"
msgstr ""
"<qt>勾選此選項的話,在刪除 Pilot 備忘的同時要刪除相關 KNotes 備忘的話,將不會"
"與您確認。除非您確定您要在掌上型裝置與您的 PC 中保存同樣的備忘,否則請不要使"
"用此選項。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:49
#, no-c-format
msgid "Sync"
msgstr "同步"
#: conduits/malconduit/mal-setup_dialog.ui:52
#, no-c-format
msgid "Select how often AvantGo should be synchronised"
msgstr "選擇 AvantGo 多久應該同步一次"
#: conduits/malconduit/mal-setup_dialog.ui:72
#, no-c-format
msgid "&Every sync"
msgstr "每次熱同步時(&E)"
#: conduits/malconduit/mal-setup_dialog.ui:78
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync. "
"To perform a successful synchronization, you need to have access to the MAL "
"server during the HotSync.</qt>"
msgstr ""
"<qt>選擇此選項,則在每次進行熱同步時會與 MAL 伺服器同步。要成功同步,您必須在"
"熱同步期間能夠存取 MAL 伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:86
#, no-c-format
msgid "Once per &hour"
msgstr "每小時一次(&H)"
#: conduits/malconduit/mal-setup_dialog.ui:92
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one hour after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一小時的熱同步動作時,會"
"再與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:100
#, no-c-format
msgid "Once a &day"
msgstr "每天一次(&D)"
#: conduits/malconduit/mal-setup_dialog.ui:103
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one day after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一天的熱同步動作時,會再"
"與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:111
#, no-c-format
msgid "Once a &week"
msgstr "每週一次(&W)"
#: conduits/malconduit/mal-setup_dialog.ui:114
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one week after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一週的熱同步動作時,會再"
"與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:122
#, no-c-format
msgid "Once a &month"
msgstr "每個月一次(&M)"
#: conduits/malconduit/mal-setup_dialog.ui:125
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the MAL server on every HotSync "
"that is at least one month after the previous MAL sync. To perform a "
"successful synchronization, you need to have access to the MAL server during "
"the HotSync.</qt>"
msgstr ""
"<qt>選擇此選項,則在上一次與 MAL 伺服器同步之後至少隔一個月的熱同步動作時,會"
"再與 MAL 伺服器同步。要成功同步,您必須在熱同步期間能夠存取 MAL 伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:154
#, no-c-format
msgid "Proxy"
msgstr "代理伺服器"
#: conduits/malconduit/mal-setup_dialog.ui:168
#, no-c-format
msgid "Proxy Type"
msgstr "代理伺服器類型"
#: conduits/malconduit/mal-setup_dialog.ui:185
#, no-c-format
msgid "&No proxy"
msgstr "不使用代理伺服器(&N)"
#: conduits/malconduit/mal-setup_dialog.ui:191
#, no-c-format
msgid ""
"<qt>Select this option if you do not want KPilot to use a proxy server. Use "
"this option if you connect to the internet directly.</qt>"
msgstr "<qt>選擇此選項的話,您的 KPilot 不會使用代理伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:199
#, no-c-format
msgid "&HTTP proxy"
msgstr "HTTP 代理伺服器(&H)"
#: conduits/malconduit/mal-setup_dialog.ui:202
#, no-c-format
msgid "<qt>Select this option if you want KPilot to use a HTTP proxy.</qt>"
msgstr "<qt>選擇此選項的話,您的 KPilot 會使用 HTTP 代理伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:210
#, no-c-format
msgid "&SOCKS proxy"
msgstr "SOCKS 代理伺服器(&S)"
#: conduits/malconduit/mal-setup_dialog.ui:213
#, no-c-format
msgid "<qt>Select this option if you want KPilot to use a SOCKS proxy.</qt>"
msgstr "<qt>選擇此選項的話,您的 KPilot 會使用 SOCKS 代理伺服器。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:226
#, no-c-format
msgid "Server Information"
msgstr "伺服器資訊"
#: conduits/malconduit/mal-setup_dialog.ui:260
#: conduits/malconduit/mal-setup_dialog.ui:462
#, no-c-format
msgid "Custom &port:"
msgstr "自訂連接埠(&P)"
#: conduits/malconduit/mal-setup_dialog.ui:263
#, no-c-format
msgid "Check this box to use a non-standard proxy port."
msgstr "勾選此選項以使用一個非標準的代理伺服器連接埠。"
#: conduits/malconduit/mal-setup_dialog.ui:271
#, no-c-format
msgid "Ser&ver name:"
msgstr "伺服器名稱(&V)"
#: conduits/malconduit/mal-setup_dialog.ui:277
#: conduits/malconduit/mal-setup_dialog.ui:285
#, no-c-format
msgid ""
"<qt>If you selected HTTP or SOCKS proxy, type the address of the proxy "
"server to use here, in the form <i>foo.bar.com</i> (not <i>http://foo.bar."
"com</i> or <i>http://foo.bar.com:8080</i>).</qt>"
msgstr ""
"<qt>如果您選取 HTTP 或 SOCKS 伺服器,請在此輸入伺服器的位址,格式為 <i>foo."
"bar.com</i>(而不是 <i>http://foo.bar.com</i> 或 <i>http://foo.bar.com:8080</"
"i>)。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:305
#, no-c-format
msgid ""
"<qt>Enter the port you want KPilot to use when connecting to your proxy "
"server here.</qt>"
msgstr "<qt>輸入 KPilot 連線到代理伺服器時使用的連接埠。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:316
#, no-c-format
msgid ""
"<qt>If your proxy requires authentication, enter your password here.</qt>"
msgstr "<qt>如果您的代理伺服器需要認證,請在使輸入您的密碼。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:324
#: conduits/malconduit/mal-setup_dialog.ui:349
#, no-c-format
msgid ""
"<qt>If your proxy requires authentication, enter your username here.</qt>"
msgstr "<qt>如果您的代理伺服器需要認證,請在此輸入您的使用者名稱。</qt>"
#: conduits/malconduit/mal-setup_dialog.ui:332
#: conduits/malconduit/mal-setup_dialog.ui:514
#, no-c-format
msgid "&Password:"
msgstr "密碼(&P)"
#: conduits/malconduit/mal-setup_dialog.ui:343
#: conduits/malconduit/mal-setup_dialog.ui:525
#, no-c-format
msgid "&User name:"
msgstr "使用者名稱(&U)"
#: conduits/malconduit/mal-setup_dialog.ui:371
#: conduits/malconduit/mal-setup_dialog.ui:385
#, no-c-format
msgid ""
"<qt>Enter a list of MAL servers that do not need the use of a proxy here, "
"separated with commas, e.g: <br><i>localhost,127.0.0.1,.lan</i><qt>"
msgstr ""
"<qt>在此輸入不需要使用代理伺服器的 MAL 伺服器,以逗號分隔。例如:"
"<br><i>localhost,127.0.0.1,.lan</i>。<qt>"
#: conduits/malconduit/mal-setup_dialog.ui:379
#, no-c-format
msgid "N&o proxy for:"
msgstr "不使用代理伺服器的清單(&O)"
#: conduits/malconduit/mal-setup_dialog.ui:414
#, no-c-format
msgid "MAL Server"
msgstr "MAL 伺服器"
#: conduits/malconduit/mal-setup_dialog.ui:434
#, no-c-format
msgid "MAL Server Information"
msgstr "MAL 伺服器資訊"
#: conduits/malconduit/mal-setup_dialog.ui:451
#, no-c-format
msgid "&MAL server name:"
msgstr "MAL 伺服器名稱(&M)"
#: conduits/malconduit/mal-setup_dialog.ui:574
#, no-c-format
msgid ""
"<qt>There is currently <b>no way to set server parameters on the desktop</"
"b>; you need to use the <i>MobileLink</i> or <i>AGConnect</i> application on "
"the handheld device. </qt>"
msgstr ""
"<qt>目前沒有任何方法可在桌面上設定伺服器資訊。您必須使用掌上型裝置裡的 "
"<i>MobileLink</i> 或 <i>AGConnect</i>。</qt>"
#: conduits/memofileconduit/memofileconduit.kcfg:6
#, fuzzy, no-c-format
msgid "What directory do you want to sync your PDA's memos with?"
msgstr "選擇您要儲存您的 PDA 備忘錄的目錄"
#: conduits/memofileconduit/memofileconduit.kcfg:10
#, no-c-format
msgid "Do you want to sync your private records to the filesystem?"
msgstr ""
#: conduits/memofileconduit/setup_base.ui:33
#, no-c-format
msgid "Memofile Conduit Options"
msgstr "備忘導管選項"
#: conduits/memofileconduit/setup_base.ui:96
#, no-c-format
msgid "Sync private records:"
msgstr "同步私人紀錄:"
#: conduits/memofileconduit/setup_base.ui:104
#, no-c-format
msgid "Memos directory:"
msgstr "備忘目錄:"
#: conduits/memofileconduit/setup_base.ui:115
#, no-c-format
msgid "Select the directory you want to store your PDA's memos in"
msgstr "選擇您要儲存您的 PDA 備忘錄的目錄"
#: conduits/notepadconduit/notepad-setup.ui:17
#, no-c-format
msgid "Path to the directory to which the pictures should be exported."
msgstr "圖片要匯出的目錄路徑。"
#: conduits/notepadconduit/notepad-setup.ui:65
#, no-c-format
msgid "Output:"
msgstr "輸出:"
#: conduits/notepadconduit/notepadconduit.kcfg:9
#, no-c-format
msgid "The export directory for the notepad drawings"
msgstr ""
#: conduits/null/nullconduit.kcfg:9 conduits/recordconduit/settings.kcfg:13
#, no-c-format
msgid "The error message if the null conduit is supposed to fail"
msgstr ""
#: conduits/null/setup_base.ui:33 conduits/recordconduit/setup_base.ui:33
#, no-c-format
msgid "Null-Conduit Options"
msgstr "虛擬導管選項"
#: conduits/null/setup_base.ui:85 conduits/recordconduit/setup_base.ui:85
#, no-c-format
msgid "KPilot was here."
msgstr "KPilot 在此。"
#: conduits/null/setup_base.ui:88 conduits/recordconduit/setup_base.ui:88
#, no-c-format
msgid "<qt>Enter the message to add to the Sync Log on your Pilot here.</qt>"
msgstr "<qt>在此輸入要新增到您的 Pilot 上的同步紀錄的訊息。</qt>"
#: conduits/null/setup_base.ui:96 conduits/recordconduit/setup_base.ui:96
#, no-c-format
msgid "&Log message:"
msgstr "紀錄訊息(&L)"
#: conduits/popmail/popmail.kcfg:9
#, no-c-format
msgid "Selects the way in which mail is sent: none (0), kmail (1)."
msgstr ""
#: conduits/popmail/popmail.kcfg:13
#, no-c-format
msgid "The email address entered in the To: field of outgoing messages."
msgstr ""
#: conduits/popmail/popmail.kcfg:17
#, no-c-format
msgid "The pathname of your .signature file."
msgstr ""
#: conduits/popmail/popmail.kcfg:21
#, no-c-format
msgid "The name of KMail's outbox - use with caution."
msgstr ""
#: conduits/popmail/setup-dialog.ui:34
#, no-c-format
msgid "Send Mail"
msgstr "傳送郵件"
#: conduits/popmail/setup-dialog.ui:62
#, no-c-format
msgid "Send method:"
msgstr "傳送方法:"
#: conduits/popmail/setup-dialog.ui:65 conduits/popmail/setup-dialog.ui:127
#, no-c-format
msgid ""
"<qt>Select the method KPilot will use to send the mail from your Handheld to "
"the recipients here. Depending on the method you choose, the other fields in "
"the dialog may be enabled or disabled. Currently, the only <i>working</i> "
"method is through KMail.</qt>"
msgstr ""
"<qt>請選擇 KPilot 用於傳送您的掌上型裝置發出的郵件的方式。依據您選取的方式不"
"同,其它欄位可能會開啟或關閉。目前僅支援透過 KMail。</qt>"
#: conduits/popmail/setup-dialog.ui:73
#, no-c-format
msgid "Email address:"
msgstr "電子郵件地址:"
#: conduits/popmail/setup-dialog.ui:76 conduits/popmail/setup-dialog.ui:87
#, no-c-format
msgid "<qt>Enter the email address you want to send messages as here.</qt>"
msgstr "<qt>請輸入您要傳送郵件的收件人電子郵件地址。</qt>"
#: conduits/popmail/setup-dialog.ui:84
#, no-c-format
msgid "$USER"
msgstr "$USER"
#: conduits/popmail/setup-dialog.ui:95
#, no-c-format
msgid "Signature file:"
msgstr "簽名檔:"
#: conduits/popmail/setup-dialog.ui:98 conduits/popmail/setup-dialog.ui:106
#, no-c-format
msgid ""
"<qt>If you want to add a signature file, enter the location of your "
"signature file (usually, <i>.signature</i>, located in your home folder) "
"here, or select it clicking the file picker button. The signature file "
"contains the text that is added to the end of your outgoing mail messages.</"
"qt>"
msgstr ""
"<qt>如果您要加入簽名檔,請輸入您簽名檔的位置(通常是您家目錄中的 <i>."
"signature</i>),或是透過檔案挑選器挑選。簽名檔內的文字會被附在信件的最後面。"
"</qt>"
#: conduits/popmail/setup-dialog.ui:112
#, no-c-format
msgid "Do Not Send Mail"
msgstr "不要傳送郵件"
#: conduits/popmail/setup-dialog.ui:117
#, no-c-format
msgid "Use KMail"
msgstr "使用 KMail"
#: conduits/recordconduit/settings.kcfg:9
#, no-c-format
msgid "Whether the conduit should immediately bail out with an error"
msgstr ""
#: conduits/recordconduit/settings.kcfg:17
#, no-c-format
msgid "Databases that are skipped on sync"
msgstr ""
#: conduits/recordconduit/setup_base.ui:107
#, no-c-format
msgid "&Databases:"
msgstr "資料庫(&D)"
#: conduits/recordconduit/setup_base.ui:118
#, no-c-format
msgid ""
"<qt>The Null-conduit can be attached to several databases, effectively "
"preventing them from Syncing. Enter the database names here.</qt>"
msgstr ""
"<qt>虛擬導管Null Conduit可以附加到一些資料庫中避免它們被同步。請在此輸"
"入資料庫名稱。</qt>"
#: conduits/recordconduit/setup_base.ui:143
#, no-c-format
msgid "Simulate failure"
msgstr "模擬失敗"
#: conduits/recordconduit/setup_base.ui:146
#, no-c-format
msgid "Force the conduit to simulate a failure to perform the HotSync."
msgstr "強迫導管模擬執行熱同步失敗。"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:63
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:77
#, no-c-format
msgid ""
"<qt>Enter here, or select by clicking the file picker button, the location "
"and file name of the output file used to store the handheld's system "
"information.</qt>"
msgstr ""
"<qt>請在此輸入要儲存掌上型裝置系統資訊的輸出檔名與位置,或直接點選檔案挑選器"
"按鈕來挑選。</qt>"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:71
#, no-c-format
msgid "Output &file:"
msgstr "輸出檔案(&F)"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:85
#, no-c-format
msgid "Type of Output"
msgstr "輸出類型"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:96
#, no-c-format
msgid "&HTML"
msgstr "HTML(&H)"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:102
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as a HTML "
"document.</qt>"
msgstr "<qt>選擇此選項,則會將系統資訊輸出到 HTML 文件中。</qt>"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:110
#, no-c-format
msgid "Te&xt file"
msgstr "文字檔(&X)"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:113
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as a text "
"document.</qt>"
msgstr "<qt>選擇此選項,則會將系統資訊輸出到文字檔中。</qt>"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:124
#, no-c-format
msgid ""
"<qt>Enter here, or select by clicking on the file picker button, the "
"location of the template to be used if you select the Custom template option."
"</qt>"
msgstr ""
"<qt>若您選擇使用自訂樣本,請在此輸入您要使用的樣本位置,或直接點選檔案挑選器"
"按鈕來挑選。</qt>"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:132
#, no-c-format
msgid "&Custom template:"
msgstr "自訂樣本(&C)"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:135
#, no-c-format
msgid ""
"<qt>Select this option to output the system information data as defined by a "
"custom template. Enter the location of the template in the edit box, or "
"select it clicking on the file picker button.</qt>"
msgstr ""
"<qt>選擇此選項,以使用自訂樣本來輸出系統資訊。您可以在此輸入您要使用的樣本位"
"置,或直接點選檔案挑選器按鈕來挑選。</qt>"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:147
#, no-c-format
msgid "Parts Included"
msgstr "要引入的部份"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:173
#, no-c-format
msgid "Output Type"
msgstr "輸出類型"
#: conduits/sysinfoconduit/sysinfo-setup_dialog.ui:189
#, no-c-format
msgid ""
"<qt>Check on this list the types of information about your system and "
"handheld you want to display in the output file.</qt>"
msgstr "<qt>在此清單上選擇您打算輸出到檔案中的掌上型裝置的系統資訊類型。</qt>"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:23
#, no-c-format
msgid "Debug information (for KPilot developers)"
msgstr ""
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:27
#, fuzzy, no-c-format
msgid "Hardware information"
msgstr "資料庫資訊"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:31
#, no-c-format
msgid "List of databases on handheld (takes long!)"
msgstr ""
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:35
#, fuzzy, no-c-format
msgid "Memory information"
msgstr "系統資訊"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:39
#, no-c-format
msgid "Number of addresses, todos, events and memos"
msgstr ""
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:43
#, fuzzy, no-c-format
msgid "PalmOS version"
msgstr "PalmOS 版本"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:47
#, no-c-format
msgid "Storage info (SD card, memory stick, ...)"
msgstr ""
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:51
#, fuzzy, no-c-format
msgid "Synchronization information"
msgstr "同步模式"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:55
#, fuzzy, no-c-format
msgid "User information"
msgstr "資料庫資訊"
#: conduits/sysinfoconduit/sysinfoconduit.kcfg:59
#, no-c-format
msgid "Version of KPilot, pilot-link and TDE"
msgstr ""
#: conduits/timeconduit/time-setup_dialog.ui:63
#, no-c-format
msgid "Direction"
msgstr "方向"
#: conduits/timeconduit/time-setup_dialog.ui:80
#, no-c-format
msgid "Set the &handheld time from the time on the PC"
msgstr "依據 PC 時間設定掌上型裝置的時間(&H)"
#: conduits/timeconduit/time-setup_dialog.ui:86
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the handheld time with the PC time, by "
"using the PC time on both.</qt>"
msgstr "<qt>選取此選項的話,會根據 PC 上的時間來同步掌上型裝置的時間。</qt>"
#: conduits/timeconduit/time-setup_dialog.ui:97
#, no-c-format
msgid "Set the &PC time from the time on the handheld"
msgstr "依據掌上型裝置的時間設定 PC 的時間(&H)"
#: conduits/timeconduit/time-setup_dialog.ui:100
#, no-c-format
msgid ""
"<qt>Select this option to synchronize the handheld time with the PC time, by "
"using the handheld time on both.</qt>"
msgstr "<qt>選取此選項的話,會根據掌上型裝置上的時間來同步 PC 上的時間。</qt>"
#: conduits/timeconduit/time-setup_dialog.ui:110
#, no-c-format
msgid ""
"<qt>PalmOS Version 3.25 and 3.3 do not support setting the system time, so "
"this conduit will be skipped for handhelds that run either of these "
"operating systems.</qt>"
msgstr ""
"<qt>PalmOS 3.25 與 3.3 版不支援設定系統時間,因此此導管在這兩個版本的作業系統"
"上將被忽略。</qt>"
#: conduits/vcalconduit/korganizerConduit.ui:31
#, no-c-format
msgid "Calendar-Conduit Options"
msgstr "行事曆導管選項"
#: conduits/vcalconduit/korganizerConduit.ui:105
#, no-c-format
msgid "&Standard calendar"
msgstr "標準行事曆(&S)"
#: conduits/vcalconduit/korganizerConduit.ui:108
#, no-c-format
msgid ""
"<qt>Select this option to synchronize with the calendar specified by the TDE "
"calendar settings.</qt>"
msgstr "<qt>選取此選項的話,會與 TDE 行事曆設定中指定的行事曆同步。</qt>"
#: conduits/vcalconduit/korganizerConduit.ui:119
#, no-c-format
msgid "Calendar &file:"
msgstr "行事曆檔案(&F)"
#: conduits/vcalconduit/korganizerConduit.ui:122
#, no-c-format
msgid ""
"<qt>Select this option to use a specific calendar file, instead of the "
"standard TDE calendar. This file must be in the in the vCalendar or "
"iCalendar format. Enter the location of this file in the edit box or select "
"it clicking the file picker button.</qt>"
msgstr ""
"<qt>選取此選項以使用指定的行事曆檔案,而不使用標準的 TDE 行事曆。此檔必須是 "
"vCalendar 或 iCalendar 格式。請輸入檔案的位置,或使用檔案挑選器挑選。</qt>"
#: conduits/vcalconduit/korganizerConduit.ui:141
#, no-c-format
msgid ""
"<qt>Enter here the location and filename of the calendar file or select it "
"clicking the file picker button. This file must be in the iCalendar or "
"vCalendar format.</qt>"
msgstr ""
"<qt>您可以在此輸入要使用的行事曆檔案的位置,或直接點選檔案挑選器按鈕來挑選。"
"檔案必須是 iCalendar 或 vCalendar 格式。</qt>"
#: conduits/vcalconduit/korganizerConduit.ui:151
#, no-c-format
msgid "Store &archived records in the TDE calendar"
msgstr "在 TDE 行事曆中儲存歸檔的紀錄(&A)"
#: conduits/vcalconduit/korganizerConduit.ui:154
#, no-c-format
msgid ""
"When this box is checked, archived records will still\n"
"be saved in the calendar on the PC."
msgstr "勾選此選項的話,歸檔的紀錄會被儲存在 PC 端的行事曆中。"
#: conduits/vcalconduit/korganizerConduit.ui:233
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited "
"both on your handheld and on the PC) are resolved. Possibly values are \"Use "
"KPilot's Global Setting\" to use the settings defined in KPilot HotSync "
"configuration, \"Ask User\" to let you decide case by case, \"Do Nothing\" "
"to allow the entries to be different, \"PC overrides\", \"Handheld overrides"
"\", \"Use values from last sync\" and \"Use both entries\" to create a new "
"entry on both the PC and handheld. Note that this does <i>not</i> handle "
"double-scheduling conflicts.</qt>"
msgstr ""
"<qt>在此清單中選擇要如何處理衝突的項目(您在掌上型裝置跟 PC 中都有修改的項"
"目)。可用的選項包括:「使用 KPilot 全域設定」會直接使用在 KPilot 熱同步設定"
"中的設定;「詢問使用者」則會每次都詢問使用者的意見;「不做任何事」就是維持原"
"狀還有「PC 覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等,最後「兩個"
"項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。要注意的是,這個選"
"項並<i>不會</i>處理雙重行程double-scheduling的衝突。</qt>"
#: kpilot/dbFlagsEditor_base.ui:32
#, no-c-format
msgid "Database &name:"
msgstr "資料庫名稱(&N)"
#: kpilot/dbFlagsEditor_base.ui:51
#, no-c-format
msgid "&Creator:"
msgstr "建立者(&C)"
#: kpilot/dbFlagsEditor_base.ui:70
#, no-c-format
msgid "&Type:"
msgstr "類型(&T)"
#: kpilot/dbFlagsEditor_base.ui:97
#, no-c-format
msgid "Database Flags"
msgstr "資料庫旗標"
#: kpilot/dbFlagsEditor_base.ui:108
#, no-c-format
msgid "&Ressource database"
msgstr "資源資料庫"
#: kpilot/dbFlagsEditor_base.ui:116
#, no-c-format
msgid "Rea&d-only"
msgstr "唯讀(&D)"
#: kpilot/dbFlagsEditor_base.ui:124
#, no-c-format
msgid "Database is &backed up"
msgstr "資料庫已備份(&B)"
#: kpilot/dbFlagsEditor_base.ui:132
#, no-c-format
msgid "Copy &protected"
msgstr "拷貝防護(&P)"
#: kpilot/dbFlagsEditor_base.ui:159
#, no-c-format
msgid "Misc Flags"
msgstr "雜項旗標"
#: kpilot/dbFlagsEditor_base.ui:187
#, no-c-format
msgid "Reset after &installation"
msgstr "安裝後重置(&I)"
#: kpilot/dbFlagsEditor_base.ui:195
#, no-c-format
msgid "E&xclude from sync"
msgstr "從同步排除(&X)"
#: kpilot/dbFlagsEditor_base.ui:205
#, no-c-format
msgid "Time Stamps"
msgstr "時間"
#: kpilot/dbFlagsEditor_base.ui:224
#, no-c-format
msgid "Cr&eation time:"
msgstr "建立時間(&E)"
#: kpilot/dbFlagsEditor_base.ui:235
#, no-c-format
msgid "&Modification time:"
msgstr "變更時間(&M)"
#: kpilot/dbFlagsEditor_base.ui:246
#, no-c-format
msgid "Back&up time:"
msgstr "備份時間(&U)"
#: kpilot/dbRecordEditor_base.ui:89
#, no-c-format
msgid "&Deleted"
msgstr "已刪除(&D)"
#: kpilot/dbRecordEditor_base.ui:97
#, no-c-format
msgid "Busy"
msgstr "忙碌"
#: kpilot/dbSelection_base.ui:23
#, no-c-format
msgid "Database"
msgstr "資料庫"
#: kpilot/dbSelection_base.ui:60
#, no-c-format
msgid "&Add"
msgstr "新增(&A)"
#: kpilot/kpilot.kcfg:10 kpilot/kpilot.kcfg:15 kpilot/kpilot.kcfg:20
#: kpilot/kpilot.kcfg:26 kpilot/kpilot.kcfg:31 kpilot/kpilot.kcfg:36
#: kpilot/kpilot.kcfg:41 kpilot/kpilot.kcfg:55 kpilot/kpilot.kcfg:60
#: kpilot/kpilot.kcfg:65 kpilot/kpilot.kcfg:70 kpilot/kpilot.kcfg:75
#: kpilot/kpilot.kcfg:82 kpilot/kpilot.kcfg:87 kpilot/kpilot.kcfg:92
#: kpilot/kpilot.kcfg:100 kpilot/kpilot.kcfg:105 kpilot/kpilot.kcfg:114
#: kpilot/kpilot.kcfg:127 kpilot/kpilot.kcfg:132 kpilot/kpilot.kcfg:150
#: kpilot/kpilot.kcfg:158 kpilot/kpilot.kcfg:162 kpilot/kpilot.kcfg:166
#: kpilot/kpilot.kcfg:174 kpilot/kpilot.kcfg:179
#, no-c-format
msgid ""
"\n"
" "
msgstr ""
#: kpilot/kpilot.kcfg:110
#, no-c-format
msgid "Which databases not to backup."
msgstr ""
#: kpilot/kpilot.kcfg:137
#, fuzzy, no-c-format
msgid "Prevent HotSync when screen locked"
msgstr "螢幕鎖定時,熱同步會被關閉。"
#: kpilot/kpilot.kcfg:138
#, no-c-format
msgid ""
"Turning this option on prevents syncing\n"
"\twhen the screen is locked. This is a security measure\n"
"\tto prevent people from stealing your data through physical\n"
"\taccess to a Pilot device link to your machine.\n"
"\tIt doesn't work with screensavers other than TDE, though,\n"
"\tso you will need to turn it off for other environments."
msgstr ""
#: kpilot/kpilotConfigDialog_backup.ui:18
#: kpilot/kpilotConfigDialog_device.ui:18
#: kpilot/kpilotConfigDialog_startup.ui:19 kpilot/kpilotConfigDialog_sync.ui:18
#: kpilot/kpilotConfigDialog_viewers.ui:19
#, no-c-format
msgid "KPilot Options"
msgstr "KPilot 選項"
#: kpilot/kpilotConfigDialog_backup.ui:29
#, no-c-format
msgid "Backup Frequency"
msgstr "備份頻率"
#: kpilot/kpilotConfigDialog_backup.ui:54
#, no-c-format
msgid "Do &backup:"
msgstr "執行備份(&B)"
#: kpilot/kpilotConfigDialog_backup.ui:63
#, no-c-format
msgid "On every HotSync"
msgstr "每次熱同步時"
#: kpilot/kpilotConfigDialog_backup.ui:68
#, no-c-format
msgid "On request only"
msgstr "只在使用者要求時"
#: kpilot/kpilotConfigDialog_backup.ui:90
#, no-c-format
msgid "Databases"
msgstr "資料庫"
#: kpilot/kpilotConfigDialog_backup.ui:107
#, no-c-format
msgid "&No backup:"
msgstr "無備份(&N)"
#: kpilot/kpilotConfigDialog_backup.ui:113
#: kpilot/kpilotConfigDialog_backup.ui:141
#, no-c-format
msgid ""
"<qt><p>Enter the databases types you wish to exclude from the backup "
"operation here. Use this setting if backing up some databases crashes the "
"handheld, or if you do not want a backup of some databases (like AvantGo "
"pages).</p><p>Entries with square brackets [] are <i>creator codes</i> like "
"<tt>[lnch]</tt> and can exclude a whole range of databases. Entries without "
"the brackets list database names, and may include shell-style wildcards, "
"like <tt>*_a68k</tt>.</p></qt>"
msgstr ""
"<qt><p>請在此輸入您在備份時要排除的資料庫型態。如果在備份某些資料庫時會造成掌"
"上型裝置當機的話,或是您不想備份某些資料庫(如 AvantGo 頁面),您可以使用此選"
"項。</p><p>使用方括號 [] 括起來的項目為建立者代碼(<i>Creator codes</i>),像"
"是 <tt>[Inch]</tt>,可以排除整個範圍的資料庫。沒有用方括號括起來的文字則是資"
"料庫名稱,可以包含萬用字元,如 <tt>*_a68k</tt>。</p></qt>"
#: kpilot/kpilotConfigDialog_backup.ui:127
#, no-c-format
msgid "Not &restored:"
msgstr "不回復(&R)"
#: kpilot/kpilotConfigDialog_backup.ui:133
#: kpilot/kpilotConfigDialog_backup.ui:149
#, no-c-format
msgid ""
"<qt><p>Enter the databases types you wish to exclude from the restore "
"operation here (like AvantGo databases). They will be skipped even if they "
"exist in the set of backup databases on the handheld. If you still want to "
"install an ignored database to the handheld, you can always manually install "
"it to the handheld.</p><p>Entries with square brackets [] are <i>creator "
"codes</i> like <tt>[lnch]</tt> and can exclude a whole range of databases. "
"Entries without the brackets list database names, and may include shell-"
"style wildcards, like <tt>*_a68k</tt>.</p></qt>"
msgstr ""
"<qt><p>請在此輸入您在回復資料庫時要排除的資料庫型態(如 AvantGo 資料庫)。它"
"們會在回復動作時被略過,即使在掌上型裝置有設定要備份。如果您要將一個被排除的"
"資料庫安裝到掌上型裝置,您可以手動安裝。</p><p>使用方括號 [] 括起來的項目為建"
"立者代碼(<i>Creator codes</i>),像是 <tt>[Inch]</tt>,可以排除整個範圍的資"
"料庫。沒有用方括號括起來的文字則是資料庫名稱,可以包含萬用字元,如 "
"<tt>*_a68k</tt>。</qt>"
#: kpilot/kpilotConfigDialog_backup.ui:157
#: kpilot/kpilotConfigDialog_backup.ui:168
#, no-c-format
msgid "..."
msgstr "..."
#: kpilot/kpilotConfigDialog_backup.ui:160
#, no-c-format
msgid ""
"<qt>Click here to open the database selection dialog. This dialog allows you "
"to check the databases you want to exclude from the backup from a list.</qt>"
msgstr ""
"<qt>點擊此處以開啟資料庫選取對話框。這個對話框讓您勾選您打算在備份時排除的資"
"料庫。</qt>"
#: kpilot/kpilotConfigDialog_backup.ui:171
#, no-c-format
msgid ""
"<qt>Click here to open the database selection dialog. This dialog allows you "
"to select the databases you want to exclude from the restore operation from "
"a list.</qt>"
msgstr ""
"<qt>點擊此處以開啟資料庫選取對話框。這個對話框讓您勾選您打算在回復時排除的資"
"料庫。</qt>"
#: kpilot/kpilotConfigDialog_backup.ui:181
#, no-c-format
msgid "Run conduits durin&g a backup sync"
msgstr "在備份同步時執行導管(&G)"
#: kpilot/kpilotConfigDialog_backup.ui:184
#, no-c-format
msgid ""
"<qt>Check this box to run the selected conduits before every backup. This "
"makes sure the backup is up to date with the last changes from your PC.</qt>"
msgstr ""
"<qt>勾選此選項的話,在每次備份前會先執行所選取的導管。這能確保您的備份是 PC "
"上修改過的最新的資料。</qt>"
#: kpilot/kpilotConfigDialog_device.ui:29
#, no-c-format
msgid "Pilot &device:"
msgstr "Pilot 裝置(&D)"
#: kpilot/kpilotConfigDialog_device.ui:35
#: kpilot/kpilotConfigDialog_device.ui:43
#, no-c-format
msgid ""
"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
"the correct device. You need write permission to successfully synchronize "
"with the handheld.</qt>"
msgstr ""
"<qt>請輸入 Pilot 的裝置名稱。您可以使用 <i>/dev/pilot</i> 並將它連到正確的裝"
"置檔。按下底下的按鈕可以自動偵測裝置。您需要寫入的權限才能與裝置同步。</qt>"
#: kpilot/kpilotConfigDialog_device.ui:51
#, no-c-format
msgid "&Speed:"
msgstr "速度(&S)"
#: kpilot/kpilotConfigDialog_device.ui:57
#: kpilot/kpilotConfigDialog_device.ui:115
#, no-c-format
msgid ""
"<qt>Select the speed of the serial connection to your handheld here. This "
"has no meaning for USB devices. For an older model, choose 9600. Newer "
"models may be able to handle speeds up to the maximum listed, 115200. You "
"can experiment with the connection speed: the manual suggests starting at a "
"speed of 19200 and trying faster speeds to see if they work.</qt>"
msgstr ""
"<qt>請在此選擇序列埠連接的速度。這個選項與 USB 連線無關。對一些舊式的裝置,請"
"選擇 9600。新一點的裝置可以上到 115200。您可以實驗一下看看哪個速度才正確手"
"冊的建議是從 19200 開始試,如果看起來可以,就加快速度試試。</qt>"
#: kpilot/kpilotConfigDialog_device.ui:65
#: kpilot/kpilotConfigDialog_device.ui:143
#, no-c-format
msgid ""
"<qt>Enter your name here, as it appears in the Pilot's &quot;Owner&quot; "
"setting.</qt>"
msgstr ""
"<qt>請在此輸入您的姓名,必須與 Pilot 上的 &quot;Owner&quot; 設定一樣。</qt>"
#: kpilot/kpilotConfigDialog_device.ui:88
#, no-c-format
msgid "9600"
msgstr "9600"
#: kpilot/kpilotConfigDialog_device.ui:93
#, no-c-format
msgid "19200"
msgstr "19200"
#: kpilot/kpilotConfigDialog_device.ui:98
#, no-c-format
msgid "38400"
msgstr "38400"
#: kpilot/kpilotConfigDialog_device.ui:103
#, no-c-format
msgid "57600"
msgstr "57600"
#: kpilot/kpilotConfigDialog_device.ui:108
#, no-c-format
msgid "115200"
msgstr "115200"
#: kpilot/kpilotConfigDialog_device.ui:123
#, no-c-format
msgid "En&coding:"
msgstr "編碼(&C)"
#: kpilot/kpilotConfigDialog_device.ui:129
#: kpilot/kpilotConfigDialog_device.ui:154
#, no-c-format
msgid ""
"<qt>PalmOS devices are available in many different languages. If your device "
"uses a different encoding than ISO-latin1 (ISO8859-1), select the correct "
"encoding here, in order to display special characters correctly.</qt>"
msgstr ""
"<qt>PalmOS 裝置提供了多國語言。如果您的裝置使用與 ISO-latin1ISO8859-1不同"
"的語言,請在此選擇正確的編碼,以顯示正確的字元。</qt>"
#: kpilot/kpilotConfigDialog_device.ui:137
#, no-c-format
msgid "Pilot &user:"
msgstr "Pilot 使用者(&U)"
#: kpilot/kpilotConfigDialog_device.ui:162
#, no-c-format
msgid "&Workarounds:"
msgstr "開發中選項(&W)"
#: kpilot/kpilotConfigDialog_device.ui:171
#, no-c-format
msgid "None"
msgstr "無"
#: kpilot/kpilotConfigDialog_device.ui:176
#, no-c-format
msgid "Zire 31, 72, Tungsten T5"
msgstr "Zire 31, 72, Tungsten T5"
#: kpilot/kpilotConfigDialog_device.ui:183
#, no-c-format
msgid ""
"<qt>Workarounds enable special handling for specific devices. Most devices "
"do not need special handling. However, the Zire&tm; 31, Zire 72 and Tungsten "
"T5 <i>do</i> have special needs, so if you are connecting such a device, "
"please select the workaround for them.</qt>"
msgstr ""
"<qt>開發中選項Workarounds會針對一些特殊的裝置開啟特殊的處理。大部份的裝置"
"都不需要特殊處理。不過像 Zire&tm; 31Zire 72 與 Tungsten T5 就有特殊需求,因"
"此若您是使用這類的裝置,請選擇此選項。</qt>"
#: kpilot/kpilotConfigDialog_startup.ui:33
#, no-c-format
msgid "Exit Options"
msgstr "離開選項"
#: kpilot/kpilotConfigDialog_startup.ui:44
#, no-c-format
msgid "S&top KPilot's system tray application on exit"
msgstr "離開時停止 KPilot 的系統匣應用程式(&T)"
#: kpilot/kpilotConfigDialog_startup.ui:47
#, no-c-format
msgid ""
"<qt>Check this box to stop the KPilot daemon when you quit KPilot (only if "
"KPilot started the daemon itself).</qt>"
msgstr ""
"<qt>勾選此選項的話,當您離開 KPilot 時,會同時中止 KPilot 守護程式(只在 "
"KPilot 自己啟動守護程式時有效)。</qt>"
#: kpilot/kpilotConfigDialog_startup.ui:55
#, no-c-format
msgid "Quit &after HotSync"
msgstr "熱同步後離開(&A)"
#: kpilot/kpilotConfigDialog_startup.ui:58
#, no-c-format
msgid ""
"<qt>Check this box to stop both KPilot and the KPilot daemon after the "
"HotSync finishes. This may be useful for systems where KPilot is started by "
"the USB daemon.</qt>"
msgstr ""
"<qt>勾選此選項的話,會在熱同步完成後同時停止 KPilot 與 KPilot 守護程式。如果 "
"KPilot 是由 USB 守護程式叫出來的,您就可以使用這個選項。</qt>"
#: kpilot/kpilotConfigDialog_startup.ui:68
#, no-c-format
msgid "Startup Options"
msgstr "啟動選項"
#: kpilot/kpilotConfigDialog_startup.ui:79
#: kpilot/kpilotConfigWizard_user.ui:133
#, no-c-format
msgid "&Start KPilot at login"
msgstr "登入時啟動 KPilot(&S)"
#: kpilot/kpilotConfigDialog_startup.ui:82
#, no-c-format
msgid ""
"<qt>Check this box to start up the KPilot daemon every time you log in to "
"TDE.</qt>"
msgstr ""
"<qt>勾選此選項的話,每次您登入 TDE 時就會自動啟動 KPilot 守護程式。</qt>"
#: kpilot/kpilotConfigDialog_startup.ui:90
#, no-c-format
msgid "S&how KPilot in system tray"
msgstr "在系統匣中顯示 KPilot(&H)"
#: kpilot/kpilotConfigDialog_startup.ui:93
#, no-c-format
msgid ""
"<qt>Check this box to place a Kpilot icon in the system tray, which shows "
"the daemon's status, and allows you to select the next sync type and to "
"configure KPilot.</qt>"
msgstr ""
"<qt>勾選此選項的話,會在系統匣內顯示 KPilot 圖示,告訴您目前守護程式的狀態,"
"並允許您選擇下一次同步的模式,以及設定 KPilot。</qt>"
#: kpilot/kpilotConfigDialog_sync.ui:32
#, no-c-format
msgid "Do full sync when chan&ging PCs"
msgstr "變更 PC 時執行完整同步(&G)"
#: kpilot/kpilotConfigDialog_sync.ui:38
#, no-c-format
msgid ""
"<qt>Check this box to perform a full sync when your last sync was performed "
"with another PC or system, to guarantee the completeness of your data.</qt>"
msgstr ""
"<qt>勾選此選項的話,若您最後一次同步是在另一台 PC 或系統上執行的,則會做一次"
"完整的同步,以保證您資料的完整性。</qt>"
#: kpilot/kpilotConfigDialog_sync.ui:44
#, no-c-format
msgid "HotSync (sync all changes)"
msgstr "熱同步(同步所有變更)"
#: kpilot/kpilotConfigDialog_sync.ui:49
#, no-c-format
msgid "FullSync (sync also unchanged records)"
msgstr "完整同步(包括未變更的紀錄)"
#: kpilot/kpilotConfigDialog_sync.ui:66
#, no-c-format
msgid ""
"<qt>Select in this list the synchronization type that KPilot will use as "
"default. Possible values are:<br>\"HotSync\", to run all selected conduits, "
"and sync the databases with a modified flag set, updating the modified "
"records only;<br>\"FullSync\" to run all selected conduits, and sync all "
"databases, reading all records, and performing a full backup;<br>\"Copy PC "
"to handheld\" to run all conduits and sync all databases, but instead of "
"merging the information from both sources, copy the PC data to the handheld;"
"<br>\"Copy handheld to PC\" to run all conduits and sync all databases, but "
"instead of merging the information from both sources, copy the handheld data "
"to the PC.</qt>"
msgstr ""
"<qt>在此清單中選取 KPilot 預設使用的同步方式。可用的選項包括:<br> 「熱同步」"
"HotSync會執行所有選取的導管並同步更新有變更過的資料庫紀錄。<br> 「完整"
"同步」FullSync會執行所有選取的導管以及同步所有的資料庫讀取所有的紀"
"錄,並做完整的備份。<br> 「從 PC 複製到掌上型裝置」會執行所有的導管,並同步所"
"有的資料庫,但是方向只從 PC 同步到掌上型裝置,而不做兩邊的合併。<br> 「從掌上"
"型裝置複製到 PC」會執行所有的導管並同步所有的資料庫但是方向只從掌上型裝置"
"同步到 PC而不做兩邊的合併。<br></qt>"
#: kpilot/kpilotConfigDialog_sync.ui:74
#, no-c-format
msgid "&Default sync:"
msgstr "預設同步(&D)"
#: kpilot/kpilotConfigDialog_sync.ui:132
#, no-c-format
msgid ""
"<qt>Select in this list how conflicting entries (entries which were edited "
"both on your handheld and on the PC) are resolved. Possibly values are "
"\"Ask User\" to let you decide case by case, \"Do Nothing\" to allow the "
"entries to be different, \"PC overrides\", \"Handheld overrides\", \"Use "
"values from last sync\" and \"Use both entries\" to create a new entry on "
"both the PC and handheld. Note that the conflict resolution option selected "
"here can be overridden by conduits that have their own conflict resolution "
"configuration.</qt>"
msgstr ""
"<qt>在此清單中選擇要如何處理衝突的項目(您在掌上型裝置跟 PC 中都有修改的項"
"目)。可用的選項包括:「詢問使用者」會每次都詢問使用者的意見;「不做任何事」"
"就是維持原狀還有「PC 覆寫」、「掌上型裝置覆寫」、「最後一次同步的值」等等,"
"最後「兩個項目都使用」則會在 PC 與掌上型裝置兩邊各產生一個新的項目。要注意的"
"是,若是使用的導管本身就有設定解決衝突的方式,則這裡選取的選項會被忽略。</qt>"
#: kpilot/kpilotConfigDialog_sync.ui:159
#, no-c-format
msgid "Do not sync when screensaver is active"
msgstr "螢幕保護程式啟動時不要同步"
#: kpilot/kpilotConfigDialog_sync.ui:165
#, no-c-format
msgid ""
"<qt>Check this box to prevent KPilot from syncing your handheld while the "
"screensaver is active: this is a security measure to prevent others from "
"syncing <i>their</i> handhelds with your data. This option must be disabled "
"when you use a different desktop, since KPilot is not aware of screensavers "
"other than TDE's.</qt>"
msgstr ""
"<qt>勾選此選項的話,會避免讓 KPilot 在螢幕保護程式啟動的期間去同步您的掌上型"
"裝置:這是為了安全性考量,避免其它人用他們自己的掌上型裝置來「竊取」您的資"
"料。不過若是您使用的是不同的桌面系統,則必須關閉此選項,因為 KPilot 只認得 "
"TDE 的螢幕保護程式。</qt>"
#: kpilot/kpilotConfigDialog_viewers.ui:47
#, no-c-format
msgid "Make internal viewers &editable"
msgstr "讓內部檢視器可以編輯(&E)"
#: kpilot/kpilotConfigDialog_viewers.ui:53
#, no-c-format
msgid ""
"<qt>The internal viewers can be read only or editable. The editable mode "
"allows you to add new records, delete or edit the existing records and sync "
"your modifications back to the handheld. Check this box to set the internal "
"viewers to editable mode, uncheck to set them to read only mode.</qt>"
msgstr ""
"<qt>內部檢視器可以選擇要唯讀或是可編輯。可編輯模式讓您可以新增、刪除或編輯現"
"有的紀錄,並同步到您的掌上型裝置。勾選此選項表示開啟可編輯模式,取消勾選則設"
"為唯讀模式。</qt>"
#: kpilot/kpilotConfigDialog_viewers.ui:61
#, no-c-format
msgid "&Show private records"
msgstr "顯示私人紀錄(&S)"
#: kpilot/kpilotConfigDialog_viewers.ui:64
#, no-c-format
msgid ""
"<qt>Check this box to display in the internal viewers records that are "
"marked &quot;Private&quot; in the Pilot.</qt>"
msgstr ""
"<qt>勾選此選項的話,會在內部檢視器顯示在 Pilot 上被標記為私人(&quot;"
"Private&quot;)的紀錄。</qt>"
#: kpilot/kpilotConfigDialog_viewers.ui:85
#, no-c-format
msgid "Show as \"&Last, first\""
msgstr "顯示為「姓,名」(&L)"
#: kpilot/kpilotConfigDialog_viewers.ui:88
#, no-c-format
msgid ""
"<qt>Select this option to display addresses in the internal address viewer "
"sorted by last name, first name.</qt>"
msgstr ""
"<qt>選取此選項的話,在內部地址檢視器上顯示地址時,會依「姓,名」來排序。</qt>"
#: kpilot/kpilotConfigDialog_viewers.ui:96
#, no-c-format
msgid "Show as \"&Company, last\""
msgstr "顯示為「公司,姓」(&C)"
#: kpilot/kpilotConfigDialog_viewers.ui:99
#, no-c-format
msgid ""
"<qt>Select this option to display addresses in the internal address viewer "
"sorted by company name, last name.</qt>"
msgstr ""
"<qt>選取此選項的話,在內部地址檢視器上顯示地址時,會依「公司名稱,姓」來排"
"序。</qt>"
#: kpilot/kpilotConfigDialog_viewers.ui:121
#, no-c-format
msgid "&Use key field"
msgstr "使用主欄位(&U)"
#: kpilot/kpilotConfigDialog_viewers.ui:124
#, no-c-format
msgid ""
"<qt>Check this box to combine all entries with the same last name in the "
"internal address viewer.</qt>"
msgstr ""
"<qt>選取此選項的話,在內部地址檢視器上顯示地址時,會將相同姓氏的紀錄組合在一"
"起。</qt>"
#: kpilot/kpilotConfigWizard_app.ui:24
#, no-c-format
msgid ""
"Finally, you can configure KPilot specifically for some PIM applications, "
"like Kontact (TDE's integrated PIM application) or Evolution (GNOME's "
"integrated PIM application).\n"
"\n"
"Press \"Finish\" to setup KPilot according to the settings in this "
"configuration Wizard."
msgstr ""
"最後,您可以設定 KPilot 指定一些個人資訊管理的應用程式,如 KontackTDE 的個"
"人資訊管理整合應用程式),或是 EvolutionGNOME 的個人資訊管理整合應用程"
"式)。\n"
"\n"
"設定好後按下「完成」。"
#: kpilot/kpilotConfigWizard_app.ui:37
#, no-c-format
msgid "Set Default Values for Syncing With"
msgstr "設定同步預設值"
#: kpilot/kpilotConfigWizard_app.ui:48
#, no-c-format
msgid "&TDE-PIM suite (Kontact)"
msgstr "TDE-PIM 套件(Kontact)(&K)"
#: kpilot/kpilotConfigWizard_app.ui:59
#, no-c-format
msgid "&GNOME-PIM (Evolution)"
msgstr "GNOME-PIM (Evolution)(&G)"
#: kpilot/kpilotConfigWizard_app.ui:67
#, no-c-format
msgid "No sync, just backup"
msgstr "不同步,只備份"
#: kpilot/kpilotConfigWizard_user.ui:24
#, no-c-format
msgid "This wizard will help you configure KPilot."
msgstr "這個精靈會協助您設定 KPilot。"
#: kpilot/kpilotConfigWizard_user.ui:35
#, no-c-format
msgid ""
"As a first step, we need to determine the user name and how the handheld is "
"connected to the computer."
msgstr "在第一個步驟中,我們要決定使用者名稱,以及掌上型裝置要怎麼連到電腦上。"
#: kpilot/kpilotConfigWizard_user.ui:46
#, no-c-format
msgid "Handheld && User Name"
msgstr "掌上型裝置與使用者名稱"
#: kpilot/kpilotConfigWizard_user.ui:49
#, no-c-format
msgid ""
"<p>You can either let KPilot detect these values automatically (for this you "
"need your handheld ready and connected to the PC) or enter them manually.</"
"p>\n"
"<p>Please enter the username exactly as set on the handheld. </p>\n"
"<p>If setting the device type manually (i.e., if automatic detection did not "
"work for you), please look below for tips on choosing the right device "
"name. {0...n} means a number from 0 up to a very large number, though "
"usually just 255.\n"
"<p>\n"
"Serial Port: an old method of connection, used primarily by the original "
"line of Palm Pilots, and various Palm-based cellphones. Device name will "
"look like /dev/ttyS{0...n} (Linux) or /dev/cuaa{0...n} (FreeBSD).</p>\n"
"<p>\n"
"USB Port: A newer style of connection, used by most newer Palms, "
"Handsprings, and Sony Clies. Device name will look like /dev/ttyUSB{0...n} "
"or /dev/usb/tts/{0...n} (Linux) or /dev/ucom{0...n} (FreeBSD). On Linux, "
"definitely check both 0 and 1: newer devices tend to use 1; older devices "
"tend to use 0.</p>\n"
"<p>\n"
"Infrared: (pronounced infra-red) is a relatively slow connection type used "
"solely as a last resort. Device name will be /dev/ircomm0 or /dev/ttyS{0..."
"n} (Linux), or /dev/sio{0...n} (FreeBSD).</p>\n"
"<p>\n"
"Bluetooth: A new connection method, this is used almost exclusively on new, "
"high-end devices, like the Tungsten T3 or the Zire 72. Device name will be /"
"dev/usb/ttub/{0...n} or /dev/ttyUB{0...n} (Linux), or /dev/ttyp{0...n} "
"(FreeBSD).</p>\n"
"<p>\n"
"Network: This has not been tested by any of the KPilot developers themselves "
"(hardware donations always accepted!), but it has been reported that setting "
"the device to \"net:any\" will work for network-enabled devices. However, "
"this has also been known to lock KPilot up when doing anything other than "
"just syncing. Use it with caution.\n"
"</p>"
msgstr ""
"<p>您可以讓 KPilot 自動偵測這些值(您當然要先將您的掌上型裝置連到您的電腦"
"上),或是自己手動輸入這些值。</p>\n"
"<p>請輸入掌上型裝置上設定的使用者名稱。</p>\n"
"<p>如果無法自動偵測,您必須手動輸入裝置型態時,請先參考底下的提示,以選擇正確"
"的裝置名稱。{0...n} 表示從 0 到 n通常 n 不超過 255。</p>\n"
"<p>序列埠:舊式的連接方式,主要用於早期的 Palm Pilots以及一些 Palm 的行動電"
"話。它們的裝置名稱會是 /dev/ttyS{0...n}(在 Linux 上)或是 /dev/cuaa{0...n}"
"(在 FreeBSD 上)。</p>\n"
"<p>USB 埠:新式的連線方式,主要用於新的 PalmsHandsprings 與 Sony Clies 系"
"列。裝置名稱會是 /dev/ttyUSB{0...n}(在 Linux 上)或是 /dev/ucom{0...n}(在 "
"FreeBSD 上)。在 Linux 上,您要同時試試 0 跟 1因為新式的裝置會用 1而較舊"
"的裝置會用 0。</p>\n"
"<p>紅外線:速度比較慢,通常只用於最後的救急。裝置名稱會是 /dev/ircomm0 或 /"
"dev/ttyS{0...b}(在 Linux 上),或是 /dev/sio{0...n}(在 FreeBSD 上)。</p>\n"
"<p>藍芽:新式的連線方式,通常只用於新的,高檔的裝置,如 Tungsten T3 或 Zire "
"72。裝置名稱會是 /dev/usb/ttub/{0...n} 或 /dev/ttyUB{0...n}(在 Linux 上),"
"或是 /dev/ttyp{0...n}(在 FreeBSD 上)。</p>\n"
"<p>網路:目前尚未經過任何 KPilot 開發者的測試(有人要捐獻硬體嗎?),不過已經"
"有回報,將裝置設為 \"net:any\" 可以在開啟網路的裝置上運作。不過,也有人回報說"
"使用這個選項只能做同步,其他的動作都會鎖死 KPilot。所以請小心使用。</p></p>"
#: kpilot/kpilotConfigWizard_user.ui:73
#, no-c-format
msgid "&Device:"
msgstr "裝置(&D)"
#: kpilot/kpilotConfigWizard_user.ui:79 kpilot/kpilotConfigWizard_user.ui:101
#, no-c-format
msgid ""
"<qt>Enter the device the Pilot is attached to (for instance a serial or USB "
"port) here. You can also use <i>/dev/pilot</i>, and make that a symlink to "
"the correct device. Use the button below to automatically detect the device. "
"You need write permission to successfully synchronize with the handheld.</qt>"
msgstr ""
"<qt>請輸入 Pilot 的裝置名稱。您可以使用 <i>/dev/pilot</i> 並將它連到正確的裝"
"置檔。按下底下的按鈕可以自動偵測裝置。您需要寫入的權限才能與裝置同步。</qt>"
#: kpilot/kpilotConfigWizard_user.ui:87
#, no-c-format
msgid "&Automatically Detect Handheld && User Name"
msgstr "自動偵測掌上型裝置與使用者名稱(&A)"
#: kpilot/kpilotConfigWizard_user.ui:90
#, no-c-format
msgid ""
"<qt>Click this button to open the detection dialog. The wizard will try to "
"automatically find and display the correct device and username for your "
"handheld. If the wizard cannot retrieve this information, check if you have "
"write permission for the device.</qt>"
msgstr ""
"<qt>點擊此按鍵開啟偵測對話框。這個精靈會試著自動找出您的掌上型裝置,並顯示使"
"用者名稱。如果精靈無法取得這些資訊,請檢查您是否對該裝置有寫入的權限。</qt>"
#: kpilot/kpilotConfigWizard_user.ui:98
#, no-c-format
msgid "/dev/pilot"
msgstr "/dev/pilot"
#: kpilot/kpilotConfigWizard_user.ui:109 kpilot/kpilotConfigWizard_user.ui:123
#, no-c-format
msgid ""
"<qt>Enter your username here, as it appears in the Pilot's &quot;Owner&quot; "
"setting, or use the button below to automatically detect it.</qt>"
msgstr ""
"<qt>請在此輸入您的使用者名稱,必須與 Pilot 上的 &quot;Owner&quot; 設定一樣,"
"或是用底下的按鍵來自動偵測。</qt>"
#: kpilot/kpilotConfigWizard_user.ui:117
#, no-c-format
msgid "User na&me:"
msgstr "使用者名稱(&M)"
#: kpilot/kpilotConfigWizard_user.ui:139
#, no-c-format
msgid ""
"<qt>Check this box to make the kpilot daemon load when you first log in "
"until you log out. That means (in theory), that you should not have to do "
"anything other than connect your handheld and push \"sync\", and kpilot will "
"appear and magically do your bidding. </qt>"
msgstr ""
"<qt>勾選此選項的話,當您當入時 KPilot 守護程式會自動載入,直到您登出。這表示"
"理論上您不需要做什麼只需要連上您的掌上型裝置然後按下「同步」KPilot "
"就會自動出現並神奇地照您的吩咐工作。</qt>"
#: kpilot/todoEditor_base.ui:32
#, no-c-format
msgid "&Description:"
msgstr "描述(&D)"
#: kpilot/todoEditor_base.ui:54
#, no-c-format
msgid "&Note:"
msgstr "附註(&N)"
#: kpilot/todoEditor_base.ui:71
#, no-c-format
msgid "Ca&tegory:"
msgstr "類別(&T)"
#: kpilot/todoEditor_base.ui:90
#, no-c-format
msgid "&Priority:"
msgstr "優先等級(&P)"
#: kpilot/todoEditor_base.ui:104
#, no-c-format
msgid "2"
msgstr "2"
#: kpilot/todoEditor_base.ui:109
#, no-c-format
msgid "3"
msgstr "3"
#: kpilot/todoEditor_base.ui:114
#, no-c-format
msgid "4"
msgstr "4"
#: kpilot/todoEditor_base.ui:119
#, no-c-format
msgid "5"
msgstr "5"
#: kpilot/todoEditor_base.ui:147
#, no-c-format
msgid "&Completed"
msgstr "已完成(&C)"
#: kpilot/todoEditor_base.ui:155
#, no-c-format
msgid "Has &end date:"
msgstr "有結束日期(&E)"
#, fuzzy
#~ msgid "&Delete"
#~ msgstr "已刪除(&D)"
#, fuzzy
#~ msgid "Configuration"
#~ msgstr "組態精靈"
#, fuzzy
#~ msgid "&Settings"
#~ msgstr "區域化設定"