Additional k => tde renaming and fixes

pull/2/head
Slávek Banko 11 years ago
parent c92d934b94
commit dd324e7f34

@ -12,7 +12,7 @@ o Philipp Hullmann fixed many bugs in the todo conduit.
o David Bishop converted most of the UI to Qt Designer .ui.
o Reinhold Kainhofer fixed and extended the VCal conduits when it was
really needed.
o The addressbook conduit was rewritten by R. Kainhofer to use libkabc
o The addressbook conduit was rewritten by R. Kainhofer to use libtdeabc
o The time conduit, the MAL conduit (AvantGo) and the PalmDOC conduit
were also written by R. Kainhofer
o Aaron J. Seigo, Jorg Habenicht, and others contributed too.

@ -1572,7 +1572,7 @@ point of view
> 1) Do I understand it right from the ksync proposal on pim.kde.org that
> kitchensync is the application that does all the communication with the
> "devices" (korganizer, palm, opie, kabc, local files etc.), while ksync is
> "devices" (korganizer, palm, opie, tdeabc, local files etc.), while ksync is
> just the abstract library with the sync algorithm framework?
It's a bit more.

@ -1 +1 @@
Subproject commit b4d585c643d92787bfa17b935ce00b09960ee360
Subproject commit 6b7f7225eff4c49b2dd71804d5fdacb03efcf461

@ -6,7 +6,7 @@ set(conduit_abbrowser_SRCS
resolutionDialog.cc
abbrowser-factory.cc
abbrowser-setup.cc
kabcRecord.cc
tdeabcRecord.cc
abbrowser-conduit.cc
)
@ -23,7 +23,7 @@ kde3_add_kcfg_files(conduit_abbrowser_SRCS ${conduit_abbrowser_KCFGS})
trinity_add_ui_files(conduit_abbrowser_SRCS ${conduit_abbrowser_UIS})
trinity_automoc(${conduit_abbrowser_SRCS})
add_library(conduit_address SHARED ${conduit_abbrowser_SRCS})
target_link_libraries(conduit_address kabc_file kabc)
target_link_libraries(conduit_address tdeabc_file tdeabc)
set_target_properties(conduit_address PROPERTIES LOCATION ${KDE3_PLUGIN_INSTALL_DIR}
INSTALL_RPATH ${CMAKE_INSTALL_PREFIX}/lib
PREFIX ""

@ -9,7 +9,7 @@ conduit_address_la_SOURCES = \
resolutionDialog.cc \
abbrowser-factory.cc \
abbrowser-setup.cc \
kabcRecord.cc \
tdeabcRecord.cc \
abbrowser-conduit.cc
conduit_address_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui
conduit_address_la_LIBADD = ../../lib/libkpilot.la -ltdeabc -ltdeabc_file
@ -18,7 +18,7 @@ servicedir = $(kde_servicesdir)
service_DATA = abbrowser_conduit.desktop
kde_kcfg_DATA = abbrowserconduit.kcfg
kabcustompagedir = $(kde_datadir)/kaddressbook/contacteditorpages
kabcustompage_DATA = KPilotCustomFieldEditor.ui
tdeabcustompagedir = $(kde_datadir)/kaddressbook/contacteditorpages
tdeabcustompage_DATA = KPilotCustomFieldEditor.ui
METASOURCES = AUTO

@ -5,7 +5,7 @@
** Copyright (C) 2007 by Adriaan de Groot <groot@kde.org>
**
** The abbrowser conduit copies addresses from the Pilot's address book to
** the KDE addressbook maintained via the kabc library.
** the KDE addressbook maintained via the tdeabc library.
*/
/*
@ -49,7 +49,7 @@
#include "resolutionDialog.h"
#include "resolutionTable.h"
#include "abbrowserSettings.h"
#include "kabcRecord.h"
#include "tdeabcRecord.h"
#include "abbrowser-conduit.moc"
@ -765,7 +765,7 @@ void AbbrowserConduit::slotDeletedRecord()
Addressee e = aBook->findByUid(uid);
DEBUGKPILOT << fname << ": now looking at palm id: ["
<< id << "], kabc uid: [" << uid << "]." << endl;
<< id << "], tdeabc uid: [" << uid << "]." << endl;
PilotAddress*backupAddr=0L;
if (backupRec)
@ -1234,13 +1234,13 @@ bool AbbrowserConduit::_savePCAddr(Addressee &pcAddr, PilotAddress*,
long pilotIdL = pilotId.toLong();
if(!pilotId.isEmpty())
{
// because we maintain a mapping between pilotId -> kabc uid, whenever we add
// because we maintain a mapping between pilotId -> tdeabc uid, whenever we add
// a new relationship, we have to remove any old mapping that would tie a different
// pilot id -> this kabc uid
// pilot id -> this tdeabc uid
TQMap < recordid_t, TQString>::iterator it;
for ( it = addresseeMap.begin(); it != addresseeMap.end(); ++it ) {
TQString kabcUid = it.data();
if (kabcUid == pcAddr.uid()) {
TQString tdeabcUid = it.data();
if (tdeabcUid == pcAddr.uid()) {
addresseeMap.remove(it);
break;
}
@ -1348,7 +1348,7 @@ bool AbbrowserConduit::_equal(const PilotAddress *piAddress, const Addressee &ab
for (TQStringList::Iterator it = piEmails.begin(); it != piEmails.end(); it++) {
if (!abEmails.contains(*it))
{
DEBUGKPILOT << fname << ": kabc e-mail missing" << endl;
DEBUGKPILOT << fname << ": tdeabc e-mail missing" << endl;
return false;
}
}
@ -1359,7 +1359,7 @@ bool AbbrowserConduit::_equal(const PilotAddress *piAddress, const Addressee &ab
PhoneNumber::List abPhones(abEntry.phoneNumbers());
PhoneNumber::List piPhones = TDEABCSync::getPhoneNumbers(*piAddress);
// first make sure that all of the pilot phone numbers are in kabc
// first make sure that all of the pilot phone numbers are in tdeabc
for (PhoneNumber::List::Iterator it = piPhones.begin(); it != piPhones.end(); it++) {
PhoneNumber piPhone = *it;
bool found=false;
@ -1375,11 +1375,11 @@ bool AbbrowserConduit::_equal(const PilotAddress *piAddress, const Addressee &ab
}
}
if (!found) {
DEBUGKPILOT << fname << ": not equal because kabc phone not found." << endl;
DEBUGKPILOT << fname << ": not equal because tdeabc phone not found." << endl;
return false;
}
}
// now the other way. *cringe* kabc has the capacity to store way more addresses
// now the other way. *cringe* tdeabc has the capacity to store way more addresses
// than the Pilot, so this might give false positives more than we'd want....
for (PhoneNumber::List::Iterator it = abPhones.begin(); it != abPhones.end(); it++) {
PhoneNumber abPhone = *it;

@ -35,7 +35,7 @@
#include <pilotAddress.h>
#include <plugin.h>
#include "kabcRecord.h"
#include "tdeabcRecord.h"
class ResolutionTable;

@ -5,7 +5,7 @@
** Copyright (C) 2007 by Adriaan de Groot <groot@kde.org>
**
** The abbrowser conduit copies addresses from the Pilot's address book to
** the KDE addressbook maintained via the kabc library. This file
** the KDE addressbook maintained via the tdeabc library. This file
** deals with the actual copying of HH addresses to KABC addresses
** and back again.
*/
@ -38,7 +38,7 @@
#include <tdeglobal.h>
#include <tdeabc/addressee.h>
#include "kabcRecord.h"
#include "tdeabcRecord.h"
/**
* Okay, this is so that we can map the Pilot phone types to Phone Number
@ -590,9 +590,9 @@ void TDEABCSync::copy(TDEABC::Addressee &toAbEntry,
// the other phone number fields
toAbEntry.setEmails(fromPiAddr.getEmails());
// going from Pilot to kabc, we need to clear out all phone records in kabc
// going from Pilot to tdeabc, we need to clear out all phone records in tdeabc
// so that they can be set from the Pilot. If we do not do this, then records
// will be left in kabc when they are removed from the Pilot and we'll look
// will be left in tdeabc when they are removed from the Pilot and we'll look
// broken.
TDEABC::PhoneNumber::List old = toAbEntry.phoneNumbers();
for (TDEABC::PhoneNumber::List::Iterator it = old.begin(); it != old.end(); ++it) {
@ -600,7 +600,7 @@ void TDEABCSync::copy(TDEABC::Addressee &toAbEntry,
toAbEntry.removePhoneNumber(phone);
}
// now, get the phone numbers from the Pilot and set them one at a time in kabc
// now, get the phone numbers from the Pilot and set them one at a time in tdeabc
TDEABC::PhoneNumber::List phones = TDEABCSync::getPhoneNumbers(fromPiAddr);
for (TDEABC::PhoneNumber::List::Iterator it = phones.begin(); it != phones.end(); ++it) {
TDEABC::PhoneNumber phone = *it;
@ -618,9 +618,9 @@ void TDEABCSync::copy(TDEABC::Addressee &toAbEntry,
TDEABCSync::setFieldFromHHOtherPhone(toAbEntry,
fromPiAddr.getPhoneField(PilotAddressInfo::eOther),syncSettings);
// going from Pilot to kabc, we need to clear out all addresses in kabc
// going from Pilot to tdeabc, we need to clear out all addresses in tdeabc
// so that they can be set from the Pilot. If we do not do this, then records
// will be left in kabc when they are removed from the Pilot and we'll look
// will be left in tdeabc when they are removed from the Pilot and we'll look
// broken.
TDEABC::Address::List oAddr = toAbEntry.addresses();
for (TDEABC::Address::List::Iterator it = oAddr.begin(); it != oAddr.end(); ++it) {

@ -1,5 +1,5 @@
#ifndef _KPILOT_KABCRECORD_H
#define _KPILOT_KABCRECORD_H
#ifndef _KPILOT_TDEABCRECORD_H
#define _KPILOT_TDEABCRECORD_H
/* KPilot
**
** Copyright (C) 2000,2001 by Dan Pilone
@ -7,7 +7,7 @@
** Copyright (C) 2007 by Adriaan de Groot <groot@kde.org>
**
** The abbrowser conduit copies addresses from the Pilot's address book to
** the KDE addressbook maintained via the kabc library. This file
** the KDE addressbook maintained via the tdeabc library. This file
** deals with the actual copying of HH addresses to KABC addresses
** and back again.
*/

@ -23,7 +23,7 @@ dnl
dnl
dnl Questions and comments can be sent to kde-pim@kde.org
dnl
dnl This was copied and adapted from kabc's ldap configure.in.in
dnl This was copied and adapted from tdeabc's ldap configure.in.in
AC_DEFUN([KPILOT_CHECK_MAL],

@ -58,7 +58,7 @@ kde3_add_kcfg_files(kpalmdoc_SRCS kpalmdocSettings.kcfgc)
trinity_add_ui_files(kpalmdoc_SRCS kpalmdoc_dlgbase.ui)
trinity_automoc(${kpalmdoc_SRCS})
add_executable(kpalmdoc ${kpalmdoc_SRCS})
target_link_libraries(kpalmdoc ${QT_LIBRARIES} kpilot tdeui kio)
target_link_libraries(kpalmdoc ${QT_LIBRARIES} kpilot tdeui tdeio)
kpilot_rpath(kpalmdoc)
install(

@ -28,7 +28,7 @@ conduit_doc_la_LIBADD = ../../lib/libkpilot.la libpalmdoc_shared.la \
##libpalmdoc_shared.la
kpalmdoc_SOURCES = kpalmdocSettings.kcfgc kpalmdoc_dlgbase.ui kpalmdoc_dlg.cc kpalmdoc.cpp
kpalmdoc_LDFLAGS = $(PISOCK_LDFLAGS) $(PISOCK_LIB) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
kpalmdoc_LDFLAGS = $(PISOCK_LDFLAGS) $(PISOCK_LIB) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
kpalmdoc_LDADD = $(LIB_TDEFILE) $(PISOCK_LDFLAGS) $(PISOCK_LIB) ../../lib/libkpilot.la libpalmdoc_shared.la
xdg_apps_DATA = kpalmdoc.desktop

@ -10,5 +10,5 @@ kde_module_LTLIBRARIES = conduit_notepad.la
conduit_notepad_la_SOURCES = notepadconduit.kcfgc notepad-setup.ui \
notepad-conduit.cc notepad-factory.cc
conduit_notepad_la_LDFLAGS= -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui
conduit_notepad_la_LIBADD= ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_KIO)
conduit_notepad_la_LIBADD= ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_TDEIO)

@ -17,7 +17,7 @@ conduit_popmail_la_SOURCES = popmailSettings.kcfgc setup-dialog.ui \
popmail-factory.cc setupDialog.cc \
popmail-conduit.cc
conduit_popmail_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui -lDCOP
conduit_popmail_la_LIBADD = ../../lib/libkpilot.la $(LIB_KIO)
conduit_popmail_la_LIBADD = ../../lib/libkpilot.la $(LIB_TDEIO)
# this option you can leave out. Just, if you use "make dist", you need it
noinst_HEADERS = popmail-conduit.h setupDialog.h

@ -16,7 +16,7 @@ conduit_sysinfo_la_SOURCES = sysinfoSettings.kcfgc \
sysinfo-conduit.cc \
sysinfo-setup_dialog.ui
conduit_sysinfo_la_LDFLAGS = -module $(KDE_PLUGIN) $(all_libraries) $(PISOCK_LIB) $(LIB_QT) -ltdecore -ltdeio -ltdeui
conduit_sysinfo_la_LIBADD = ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_KIO)
conduit_sysinfo_la_LIBADD = ../../lib/libkpilot.la $(LIB_TDEUI) $(LIB_TDEIO)
kpilot_sysinfo_data_DATA = Template.html Template.txt
kpilot_sysinfo_datadir = $(kde_datadir)/kpilot/sysinfoconduit

@ -79,7 +79,7 @@ kde3_add_dcop_skels(kpilotTest_SRCS loggerDCOP.h)
trinity_automoc(${kpilotTest_SRCS})
add_executable(kpilotTest ${kpilotTest_SRCS})
target_link_libraries(kpilotTest ${QT_LIBRARIES} kpilot tdeui kio)
target_link_libraries(kpilotTest ${QT_LIBRARIES} kpilot tdeui tdeio)
kpilot_rpath(kpilotTest)
###
@ -99,7 +99,7 @@ kde3_add_dcop_skels(kpilotDaemon_SRCS loggerDCOP.h pilotDaemonDCOP.h)
kde3_add_dcop_stubs(kpilotDaemon_SRCS loggerDCOP.h kpilotDCOP.h)
trinity_automoc(${kpilotDaemon_SRCS})
add_executable(kpilotDaemon ${kpilotDaemon_SRCS})
target_link_libraries(kpilotDaemon ${QT_LIBRARIES} kpilot tdeui kio)
target_link_libraries(kpilotDaemon ${QT_LIBRARIES} kpilot tdeui tdeio)
kpilot_rpath(kpilotDaemon)
###
@ -137,7 +137,7 @@ kde3_add_dcop_skels(kpilot_SRCS loggerDCOP.h kpilotDCOP.h)
kde3_add_dcop_stubs(kpilot_SRCS pilotDaemonDCOP.h)
trinity_automoc(${kpilot_SRCS})
add_executable(kpilot_bin ${kpilot_SRCS})
target_link_libraries(kpilot_bin ${QT_LIBRARIES} kpilot tdeutils tdeui kio)
target_link_libraries(kpilot_bin ${QT_LIBRARIES} kpilot tdeutils tdeui tdeio)
kpilot_rpath(kpilot_bin)
set_target_properties(kpilot_bin PROPERTIES
OUTPUT_NAME kpilot

@ -18,7 +18,7 @@ METASOURCES = AUTO
INCLUDES= $(PISOCK_INCLUDE) -I$(top_srcdir)/lib $(all_includes)
libconfiguration_la_SOURCES = kpilotConfig.cc kpilotSettings.kcfgc
libconfiguration_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
libconfiguration_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
kcm_kpilot_la_SOURCES = pilotDaemonDCOP.stub kpilotConfigDialog.cc \
kpilotConfigDialog_device.ui \
@ -35,7 +35,7 @@ kcm_kpilot_la_SOURCES = pilotDaemonDCOP.stub kpilotConfigDialog.cc \
kpilotConfigWizard_app.ui \
kpilotConfigWizard.cc \
dbSelectionDialog.cc dbSelection_base.ui
kcm_kpilot_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor -module -avoid-version -no-undefined
kcm_kpilot_la_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor -module -avoid-version -no-undefined
kcm_kpilot_la_LIBADD = $(LIB_TDEFILE) $(PISOCK_LIB) \
../lib/libkpilot.la \
libconfiguration.la
@ -68,9 +68,9 @@ kpilotTest_SOURCES = \
main-test.cc
kpilot_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
kpilotDaemon_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
kpilotTest_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_KIO) -ltdetexteditor
kpilot_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
kpilotDaemon_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
kpilotTest_LDFLAGS = $(PISOCK_LDFLAGS) $(all_libraries) $(KDE_RPATH) $(LIB_QT) -lDCOP $(LIB_TDECORE) $(LIB_TDEUI) -ltdefx $(LIB_TDEIO) -ltdetexteditor
# the libraries to link against. Be aware of the order. First the libraries,

@ -55,7 +55,7 @@ set(lib_SRCS
trinity_automoc(${lib_SRCS})
kde3_add_kcfg_files(lib_SRCS kpilotlibSettings.kcfgc)
add_library(kpilot SHARED ${lib_SRCS})
target_link_libraries(kpilot ${PILOTLINK_LIBRARY} ${QT_LIBRARIES} tdeui kio)
target_link_libraries(kpilot ${PILOTLINK_LIBRARY} ${QT_LIBRARIES} tdeui tdeio)
kpilot_rpath(kpilot)
#---------- INSTALL -----------------------*

@ -29,7 +29,7 @@ libkpilot_la_SOURCES = kpilotlibSettings.kcfgc \
pilotTodoEntry.cc
libkpilot_la_LDFLAGS = $(PISOCK_LDFLAGS) -no-undefined $(all_libraries) $(KDE_EXTRA_RPATH) $(KDE_RPATH)
libkpilot_la_LIBADD = $(PISOCK_LIB) $(LIB_TDEUI) $(LIB_TDEABC) -lkcal $(LIB_QT) $(LIB_TDECORE) -lDCOP $(LIB_KIO)
libkpilot_la_LIBADD = $(PISOCK_LIB) $(LIB_TDEUI) $(LIB_TDEABC) -lkcal $(LIB_QT) $(LIB_TDECORE) -lDCOP $(LIB_TDEIO)
kpilotincludedir = $(includedir)/kpilot
kpilotinclude_HEADERS = \

@ -118,7 +118,7 @@ class PilotDatabase;
* Sometimes, however, periods of inactivity cannot be avoided --
* for instance, if you _have_ to ask the user something during a
* sync, or if you are fetching a large amount of data from a slow
* source (libkabc can do that, if your addressbook is on an LDAP
* source (libtdeabc can do that, if your addressbook is on an LDAP
* server). During these periods of inactivity (as far as the Pilot
* can tell), you can "tickle" the Pilot to keep it awake. This
* prevents the communications from being shut down. It's not

@ -50,6 +50,6 @@ endif (HAVE_CALENDARLOCAL_H)
set(importaddresses_SRCS importaddresses.cc)
trinity_add_executable(importaddresses ${importaddresses_SRCS})
target_link_libraries(importaddresses kpilot ${QT_LIBRARIES} kabc kabc_file)
target_link_libraries(importaddresses kpilot ${QT_LIBRARIES} tdeabc tdeabc_file)
add_test(importaddresses ${EXECUTABLE_OUTPUT_PATH}/importaddresses)

Loading…
Cancel
Save