diff --git a/kmymoney2/converter/imymoneyreader.h b/kmymoney2/converter/imymoneyreader.h
index 4866b03..92f8963 100644
--- a/kmymoney2/converter/imymoneyreader.h
+++ b/kmymoney2/converter/imymoneyreader.h
@@ -81,7 +81,7 @@ public:
     * into the MyMoney engine.
     *
     * This method also starts the user defined import filter program
-    * defined in the TQIF profile(when a TQIF file is selected). If none is
+    * defined in the QIF profile(when a QIF file is selected). If none is
     * defined, the file is read as is (actually the UNIX command
     * 'cat -' is used as the filter).
     *
diff --git a/kmymoney2/converter/mymoneyqifprofile.cpp b/kmymoney2/converter/mymoneyqifprofile.cpp
index f0533db..77bbe07 100644
--- a/kmymoney2/converter/mymoneyqifprofile.cpp
+++ b/kmymoney2/converter/mymoneyqifprofile.cpp
@@ -825,7 +825,7 @@ void MyMoneyQifProfile::autoDetect(const TQStringList& lines)
   TQString numericRecords = "BT$OIQ";
   TQStringList::const_iterator it;
   int datesScanned = 0;
-  // section: used to switch between different TQIF sections,
+  // section: used to switch between different QIF sections,
   // because the Record identifiers are ambigous between sections
   // eg. in transaction records, T identifies a total amount, in
   // account sections it's the type.
diff --git a/kmymoney2/converter/mymoneyqifprofile.h b/kmymoney2/converter/mymoneyqifprofile.h
index bc716da..ca0ac31 100644
--- a/kmymoney2/converter/mymoneyqifprofile.h
+++ b/kmymoney2/converter/mymoneyqifprofile.h
@@ -15,8 +15,8 @@
  *                                                                         *
  ***************************************************************************/
 
-#ifndef MYMONEYTQIFPROFILE_H
-#define MYMONEYTQIFPROFILE_H
+#ifndef MYMONEYQIFPROFILE_H
+#define MYMONEYQIFPROFILE_H
 
 // ----------------------------------------------------------------------------
 // QT Includes
diff --git a/kmymoney2/converter/mymoneyqifreader.cpp b/kmymoney2/converter/mymoneyqifreader.cpp
index 3161a0b..8764e03 100644
--- a/kmymoney2/converter/mymoneyqifreader.cpp
+++ b/kmymoney2/converter/mymoneyqifreader.cpp
@@ -82,13 +82,13 @@ class MyMoneyQifReader::Private {
     bool isTransfer(TQString& name, const TQString& leftDelim, const TQString& rightDelim);
 
     /**
-     * Converts the TQIF specific N-record of investment transactions into
+     * Converts the QIF specific N-record of investment transactions into
      * a category name
      */
     TQString typeToAccountName(const TQString& type) const;
 
     /**
-     * Converts the TQIF reconcile state to the KMyMoney reconcile state
+     * Converts the QIF reconcile state to the KMyMoney reconcile state
      */
     MyMoneySplit::reconcileFlagE reconcileState(const TQString& state) const;
 
@@ -202,7 +202,7 @@ TQString MyMoneyQifReader::Private::typeToAccountName(const TQString& type) cons
   if(type == "sell" || type == "buy")
     return i18n("Category name", "Investment fees");
 
-  return i18n("Unknown TQIF type %1").arg(type);
+  return i18n("Unknown QIF type %1").arg(type);
 }
 
 bool MyMoneyQifReader::Private::isTransfer(TQString& tmp, const TQString& leftDelim, const TQString& rightDelim)
@@ -288,7 +288,7 @@ void MyMoneyQifReader::slotSendDataToFilter(void)
   } else {
     len = m_file->readBlock(m_buffer, sizeof(m_buffer));
     if(len == -1) {
-      tqWarning("Failed to read block from TQIF import file");
+      tqWarning("Failed to read block from QIF import file");
       m_filter.closeStdin();
       m_filter.kill();
     } else {
@@ -363,7 +363,7 @@ void MyMoneyQifReader::slotProcessData(void)
 
   tqDebug("Selected date format: '%s'", list.first().data());
 
-  signalProgress(0, m_qifLines.count(), i18n("Importing TQIF ..."));
+  signalProgress(0, m_qifLines.count(), i18n("Importing QIF ..."));
   TQStringList::iterator it;
   for(it = m_qifLines.begin(); m_userAbort == false && it != m_qifLines.end(); ++it) {
     ++m_linenumber;
@@ -419,7 +419,7 @@ bool MyMoneyQifReader::startImport(void)
     while(!m_file->atEnd()) {
       len = m_file->readBlock(m_buffer, sizeof(m_buffer));
       if(len == -1) {
-        tqWarning("Failed to read block from TQIF import file");
+        tqWarning("Failed to read block from QIF import file");
       } else {
         slotReceivedDataFromFilter(0, m_buffer, len);
       }
@@ -439,7 +439,7 @@ bool MyMoneyQifReader::startImport(void)
 
     if(m_filter.start(KProcess::NotifyOnExit, KProcess::All)) {
       m_filter.resume();
-      signalProgress(0, m_file->size(), i18n("Reading TQIF ..."));
+      signalProgress(0, m_file->size(), i18n("Reading QIF ..."));
       slotSendDataToFilter();
       rc = true;
     } else {
@@ -571,12 +571,12 @@ void MyMoneyQifReader::processQifSpecial(const TQString& _line)
       d->firstTransaction = true;
       d->transactionType = m_entryType = EntryTransaction;
 
-    } else if(line.lower() == "oth l" || line.lower() == i18n("TQIF tag for liability account", "Oth L").lower()) {
+    } else if(line.lower() == "oth l" || line.lower() == i18n("QIF tag for liability account", "Oth L").lower()) {
       d->accountType = MyMoneyAccount::Liability;
       d->firstTransaction = true;
       d->transactionType = m_entryType = EntryTransaction;
 
-    } else if(line.lower() == "invst" || line.lower() == i18n("TQIF tag for investment account", "Invst").lower()) {
+    } else if(line.lower() == "invst" || line.lower() == i18n("QIF tag for investment account", "Invst").lower()) {
       d->transactionType = m_entryType = EntryInvestmentTransaction;
 
     } else if(line.lower() == "invoice" || KMyMoneyGlobalSettings::qifInvoice().lower().contains(line.lower())) {
@@ -589,19 +589,19 @@ void MyMoneyQifReader::processQifSpecial(const TQString& _line)
       m_entryType = EntrySkip;
 
     // exportable lists
-    } else if(line.lower() == "cat" || line.lower() == i18n("TQIF tag for category", "Cat").lower()) {
+    } else if(line.lower() == "cat" || line.lower() == i18n("QIF tag for category", "Cat").lower()) {
       m_entryType = EntryCategory;
 
-    } else if(line.lower() == "security" || line.lower() == i18n("TQIF tag for security", "Security").lower()) {
+    } else if(line.lower() == "security" || line.lower() == i18n("QIF tag for security", "Security").lower()) {
       m_entryType = EntrySecurity;
 
-    } else if(line.lower() == "prices" || line.lower() == i18n("TQIF tag for prices", "Prices").lower()) {
+    } else if(line.lower() == "prices" || line.lower() == i18n("QIF tag for prices", "Prices").lower()) {
       m_entryType = EntryPrice;
 
     } else if(line.lower() == "payee") {
       m_entryType = EntryPayee;
 
-    } else if(line.lower() == "class" || line.lower() == i18n("TQIF tag for a class", "Class").lower()) {
+    } else if(line.lower() == "class" || line.lower() == i18n("QIF tag for a class", "Class").lower()) {
       m_entryType = EntryClass;
 
     } else if(line.lower() == "memorized") {
@@ -617,7 +617,7 @@ void MyMoneyQifReader::processQifSpecial(const TQString& _line)
       m_entryType = EntrySkip;
 
     } else {
-      tqWarning("Unknown export header '!Type:%s' in TQIF file on line %d: Skipping section.", line.data(), m_linenumber);
+      tqWarning("Unknown export header '!Type:%s' in QIF file on line %d: Skipping section.", line.data(), m_linenumber);
       m_entryType = EntrySkip;
     }
 
@@ -635,7 +635,7 @@ void MyMoneyQifReader::processQifSpecial(const TQString& _line)
 
 void MyMoneyQifReader::processQifEntry(void)
 {
-  // This method processes a 'TQIF Entry' which is everything between two caret
+  // This method processes a 'QIF Entry' which is everything between two caret
   // signs
   //
   try {
@@ -773,7 +773,7 @@ void MyMoneyQifReader::processMSAccountEntry(const MyMoneyAccount::accountTypeE
           const MyMoneySecurity& sec = file->security(m_account.currencyId());
           if ( KMessageBox::questionYesNo(
             tqApp->mainWidget(),
-            i18n("The %1 account currently has an opening balance of %2. This TQIF file reports an opening balance of %3. Would you like to overwrite the current balance with the one from the TQIF file?").arg(m_account.name(), split.shares().formatMoney(m_account, sec),balance.formatMoney(m_account, sec)),
+            i18n("The %1 account currently has an opening balance of %2. This QIF file reports an opening balance of %3. Would you like to overwrite the current balance with the one from the QIF file?").arg(m_account.name(), split.shares().formatMoney(m_account, sec),balance.formatMoney(m_account, sec)),
             i18n("Overwrite opening balance"),
             KStdGuiItem::yes(),
             KStdGuiItem::no(),
@@ -817,7 +817,7 @@ void MyMoneyQifReader::processMSAccountEntry(const MyMoneyAccount::accountTypeE
     // Lines 1-5 are processed via processQifEntry() and processAccountEntry()
     // Then Quicken issues line 6 but since the account does not carry any
     // transaction does not write an end delimiter. Arrrgh! So we end up with
-    // a TQIF entry comprising of lines 6-11 and end up in this routine. Actually,
+    // a QIF entry comprising of lines 6-11 and end up in this routine. Actually,
     // lines 7-11 are the leadin for the next account. So we check here if
     // the !Type:xxx record also contains an !Account line and process the
     // entry as required.
@@ -899,7 +899,7 @@ TQString MyMoneyQifReader::transferAccount(TQString name, bool useBrokerage)
   m_qifEntry.clear();               // and construct a temp entry to create/search the account
   m_qifEntry << TQString("N%1").arg(name);
   m_qifEntry << TQString("Tunknown");
-  m_qifEntry << TQString("D%1").arg(i18n("Autogenerated by TQIF importer"));
+  m_qifEntry << TQString("D%1").arg(i18n("Autogenerated by QIF importer"));
   accountId = processAccountEntry(false);
 
   // in case we found a reference to an investment account, we need
@@ -910,7 +910,7 @@ TQString MyMoneyQifReader::transferAccount(TQString name, bool useBrokerage)
     m_qifEntry.clear();               // and construct a temp entry to create/search the account
     m_qifEntry << TQString("N%1").arg(name);
     m_qifEntry << TQString("Tunknown");
-    m_qifEntry << TQString("D%1").arg(i18n("Autogenerated by TQIF importer"));
+    m_qifEntry << TQString("D%1").arg(i18n("Autogenerated by QIF importer"));
     accountId = processAccountEntry(false);
   }
   m_qifEntry = tmpEntry;               // restore local copies
@@ -927,14 +927,14 @@ void MyMoneyQifReader::createOpeningBalance(MyMoneyAccount::_accountTypeE accTyp
   if(m_account.name().isEmpty()) {
     TQString name = extractLine('L');
     if(name.isEmpty()) {
-      name = i18n("TQIF imported, no account name supplied");
+      name = i18n("QIF imported, no account name supplied");
     }
     d->isTransfer(name, m_qifProfile.accountDelimiter().left(1), m_qifProfile.accountDelimiter().mid(1,1));
     TQStringList entry = m_qifEntry;   // keep a temp copy
     m_qifEntry.clear();               // and construct a temp entry to create/search the account
     m_qifEntry << TQString("N%1").arg(name);
     m_qifEntry << TQString("T%1").arg(d->accountTypeToQif(accType));
-    m_qifEntry << TQString("D%1").arg(i18n("Autogenerated by TQIF importer"));
+    m_qifEntry << TQString("D%1").arg(i18n("Autogenerated by QIF importer"));
     processAccountEntry();
     m_qifEntry = entry;               // restore local copy
   }
@@ -1053,7 +1053,7 @@ void MyMoneyQifReader::processTransactionEntry(void)
               "date profile setting of \"%2\".\n\nPressing \"Continue\" will "
               "assign todays date to the transaction. Pressing \"Cancel\" will abort "
               "the import operation. You can then restart the import and select a different "
-              "TQIF profile or create a new one.")
+              "QIF profile or create a new one.")
            .arg(extractLine('D')).arg(m_qifProfile.inputDateFormat()),
          i18n("Invalid date format"));
     switch(rc) {
@@ -1081,7 +1081,7 @@ void MyMoneyQifReader::processTransactionEntry(void)
 //  t.setMemo(tmp);
 
   // Assign the "#" field to the transaction's bank id
-  // This is the custom KMM extension to TQIF for a unique ID
+  // This is the custom KMM extension to QIF for a unique ID
   tmp = extractLine('#');
   if(!tmp.isEmpty())
   {
@@ -1101,7 +1101,7 @@ void MyMoneyQifReader::processTransactionEntry(void)
       tmp = tmp.mid(1, tmp.length()-2);
   s1.m_strCategoryName = tmp;
 #endif
-  // TODO (Ace) Deal with currencies more gracefully.  TQIF cannot deal with multiple
+  // TODO (Ace) Deal with currencies more gracefully.  QIF cannot deal with multiple
   // currencies, so we should assume that transactions imported into a given
   // account are in THAT ACCOUNT's currency.  If one of those involves a transfer
   // to an account with a different currency, value and shares should be
@@ -1300,7 +1300,7 @@ void MyMoneyQifReader::processInvestmentTransactionEntry(void)
               "date profile setting of \"%2\".\n\nPressing \"Continue\" will "
               "assign todays date to the transaction. Pressing \"Cancel\" will abort "
               "the import operation. You can then restart the import and select a different "
-              "TQIF profile or create a new one.")
+              "QIF profile or create a new one.")
            .arg(extractLine('D')).arg(m_qifProfile.inputDateFormat()),
          i18n("Invalid date format"));
     switch(rc) {
@@ -1379,10 +1379,10 @@ void MyMoneyQifReader::processInvestmentTransactionEntry(void)
   // abbreviations or ordered words differently, etc.
   //
   // If there is a perfect name match with a subordinate stock account, great.
-  // More likely, we have to rely on the TQIF file containing !Type:Security
+  // More likely, we have to rely on the QIF file containing !Type:Security
   // records, which tell us the mapping from name to symbol.
   //
-  // Therefore, generally it is not recommended to import a TQIF file containing
+  // Therefore, generally it is not recommended to import a QIF file containing
   // investment transactions but NOT containing security records.
 
   TQString securitysymbol = m_investmentMap[securityname];
@@ -2042,7 +2042,7 @@ TQString MyMoneyQifReader::processAccountEntry(bool resetAccountId)
     // in case it's a stock account, we need to setup a fix investment account
     if(account.isInvest()) {
       acc.setName(i18n("%1 (Investment)").arg(account.name()));    // use the same name for the investment account
-      acc.setDescription(i18n("Autogenerated by TQIF importer from type Mutual account entry"));
+      acc.setDescription(i18n("Autogenerated by QIF importer from type Mutual account entry"));
       acc.setAccountType(MyMoneyAccount::Investment);
       parentAccount = file->asset();
       kmymoney2->createAccount(acc, parentAccount, brokerage, MyMoneyMoney());
@@ -2175,7 +2175,7 @@ void MyMoneyQifReader::selectOrCreateAccount(const SelectCreateMode mode, MyMone
     }
   } else {
     accountSelect.setHeader(i18n("Import transactions to %1").arg(typeStr));
-    msg = i18n("No %1 information has been found in the selected TQIF file. "
+    msg = i18n("No %1 information has been found in the selected QIF file. "
                "Please select an account using the selection box in the dialog or "
                "create a new %2 by pressing the <b>Create</b> button.")
                .arg(typeStr).arg(typeStr);
@@ -2223,7 +2223,7 @@ void MyMoneyQifReader::selectOrCreateAccount(const SelectCreateMode mode, MyMone
               const MyMoneySecurity&  sec = file->security(account.currencyId());
               if ( KMessageBox::questionYesNo(
                 tqApp->mainWidget(),
-                i18n("The %1 account currently has an opening balance of %2. This TQIF file reports an opening balance of %3. Would you like to overwrite the current balance with the one from the TQIF file?").arg(account.name(), split.shares().formatMoney(account, sec), balance.formatMoney(account, sec)),
+                i18n("The %1 account currently has an opening balance of %2. This QIF file reports an opening balance of %3. Would you like to overwrite the current balance with the one from the QIF file?").arg(account.name(), split.shares().formatMoney(account, sec), balance.formatMoney(account, sec)),
                 i18n("Overwrite opening balance"),
                 KStdGuiItem::yes(),
                 KStdGuiItem::no(),
diff --git a/kmymoney2/converter/mymoneyqifreader.h b/kmymoney2/converter/mymoneyqifreader.h
index b97efe4..dfde437 100644
--- a/kmymoney2/converter/mymoneyqifreader.h
+++ b/kmymoney2/converter/mymoneyqifreader.h
@@ -20,8 +20,8 @@
  *                                                                         *
  ***************************************************************************/
 
-#ifndef MYMONEYTQIFREADER_H
-#define MYMONEYTQIFREADER_H
+#ifndef MYMONEYQIFREADER_H
+#define MYMONEYQIFREADER_H
 
 // ----------------------------------------------------------------------------
 // QT Headers
@@ -109,7 +109,7 @@ public:
     * into the MyMoney engine.
     *
     * This method also starts the user defined import filter program
-    * defined in the TQIF profile. If none is defined, the file is read
+    * defined in the QIF profile. If none is defined, the file is read
     * as is (actually the UNIX command 'cat -' is used as the filter).
     *
     * If data from the filter program is available, the slot
@@ -152,7 +152,7 @@ private:
 
   /**
     * This method scans a transaction contained in
-    * a TQIF file formatted as an account record. This
+    * a QIF file formatted as an account record. This
     * format is used by MS-Money. If the specific data
     * is not found, then the data in the entry is treated
     * as a transaction. In this case, the user will be asked to
@@ -222,11 +222,11 @@ private:
 
   /**
     * This method is used to get the account id of the split for
-    * a transaction from the text found in the TQIF $ or L record.
+    * a transaction from the text found in the QIF $ or L record.
     * If an account with the name is not found, the user is asked
     * if it should be created.
     *
-    * @param name name of account as found in the TQIF file
+    * @param name name of account as found in the QIF file
     * @param value value found in the T record
     * @param value2 value found in the $ record for splitted transactions
     *
diff --git a/kmymoney2/converter/mymoneyqifwriter.h b/kmymoney2/converter/mymoneyqifwriter.h
index ceb915e..9f08159 100644
--- a/kmymoney2/converter/mymoneyqifwriter.h
+++ b/kmymoney2/converter/mymoneyqifwriter.h
@@ -20,8 +20,8 @@
  *                                                                         *
  ***************************************************************************/
 
-#ifndef MYMONEYTQIFWRITER_H
-#define MYMONEYTQIFWRITER_H
+#ifndef MYMONEYQIFWRITER_H
+#define MYMONEYQIFWRITER_H
 
 // ----------------------------------------------------------------------------
 // QT Headers
@@ -44,7 +44,7 @@ class MyMoneySplit;
   */
 
 /**
-  * This class represents the TQIF writer. All conversion between the
+  * This class represents the QIF writer. All conversion between the
   * internal representation of accounts, transactions is handled in this
   * object. The conversion is controlled using a MyMoneyQifProfile to allow
   * the user to control the conversion.
diff --git a/kmymoney2/converter/webpricequote.cpp b/kmymoney2/converter/webpricequote.cpp
index 2a25abf..a5a9087 100644
--- a/kmymoney2/converter/webpricequote.cpp
+++ b/kmymoney2/converter/webpricequote.cpp
@@ -870,7 +870,7 @@ const TQString FinanceQuoteProcess::niceName(const TQString& crypticName) {
 // Universal date converter
 //
 
-// In 'strict' mode, this is designed to be compatable with the TQIF profile date
+// In 'strict' mode, this is designed to be compatable with the QIF profile date
 // converter.  However, that converter deals with the concept of an apostrophe
 // format in a way I don't understand.  So for the moment, they are 99%
 // compatable, waiting on that issue. (acejones)
diff --git a/kmymoney2/dialogs/kaccountselectdlg.cpp b/kmymoney2/dialogs/kaccountselectdlg.cpp
index 3a05481..d572655 100644
--- a/kmymoney2/dialogs/kaccountselectdlg.cpp
+++ b/kmymoney2/dialogs/kaccountselectdlg.cpp
@@ -77,7 +77,7 @@ KAccountSelectDlg::KAccountSelectDlg(const KMyMoneyUtils::categoryTypeE accountT
   KGuiItem abortButtenItem( i18n("&Abort" ),
                     TQIconSet(il->loadIcon("stop", KIcon::Small, KIcon::SizeSmall)),
                     i18n("Abort the import operation and dismiss all changes"),
-                    i18n("Use this to abort the import. Your financial data will be in the state before you started the TQIF import."));
+                    i18n("Use this to abort the import. Your financial data will be in the state before you started the QIF import."));
   m_kButtonAbort->setGuiItem(abortButtenItem);
 
 
diff --git a/kmymoney2/dialogs/kchooseimportexportdlg.cpp b/kmymoney2/dialogs/kchooseimportexportdlg.cpp
index 558216c..79c19e8 100644
--- a/kmymoney2/dialogs/kchooseimportexportdlg.cpp
+++ b/kmymoney2/dialogs/kchooseimportexportdlg.cpp
@@ -71,7 +71,7 @@ KChooseImportExportDlg::~KChooseImportExportDlg()
 void KChooseImportExportDlg::slotTypeActivated(const TQString& text)
 {
   if (text=="QIF") {
-    descriptionLabel->setText(i18n("TQIF files are created by the popular accounting program Quicken.\n"
+    descriptionLabel->setText(i18n("QIF files are created by the popular accounting program Quicken.\n"
       "Another dialog will appear, if you choose this type, asking for further\n"
       "information relevant to the Quicken format."));
   } else {
diff --git a/kmymoney2/dialogs/kchooseimportexportdlgdecl.ui b/kmymoney2/dialogs/kchooseimportexportdlgdecl.ui
index 9ddaed0..abbb7a9 100644
--- a/kmymoney2/dialogs/kchooseimportexportdlgdecl.ui
+++ b/kmymoney2/dialogs/kchooseimportexportdlgdecl.ui
@@ -118,7 +118,7 @@ Once you have chosen an import type please press the OK button.</string>
                     <item>
                         <property>
                             <name>text</name>
-                            <string>TQIF</string>
+                            <string>QIF</string>
                         </property>
                     </item>
                     <item>
diff --git a/kmymoney2/dialogs/kexportdlg.cpp b/kmymoney2/dialogs/kexportdlg.cpp
index d71a95c..ac94c5f 100644
--- a/kmymoney2/dialogs/kexportdlg.cpp
+++ b/kmymoney2/dialogs/kexportdlg.cpp
@@ -101,7 +101,7 @@ KExportDlg::~KExportDlg()
 
 void KExportDlg::slotBrowse()
 {
-  TQString newName(KFileDialog::getSaveFileName(TQString(),"*.TQIF"));
+  TQString newName(KFileDialog::getSaveFileName(TQString(),"*.QIF"));
   KMyMoneyUtils::appendCorrectFileExt(newName, TQString("qif"));
   if (!newName.isEmpty())
     m_qlineeditFile->setText(newName);
@@ -109,7 +109,7 @@ void KExportDlg::slotBrowse()
 
 void KExportDlg::slotNewProfile(void)
 {
-  MyMoneyQifProfileEditor* editor = new MyMoneyQifProfileEditor(true, this, "TQIF Profile Editor");
+  MyMoneyQifProfileEditor* editor = new MyMoneyQifProfileEditor(true, this, "QIF Profile Editor");
   if(editor->exec()) {
     m_profileComboBox->setCurrentText(editor->selectedProfile());
     loadProfiles();
diff --git a/kmymoney2/dialogs/kexportdlg.h b/kmymoney2/dialogs/kexportdlg.h
index 8825b9b..6bf91ad 100644
--- a/kmymoney2/dialogs/kexportdlg.h
+++ b/kmymoney2/dialogs/kexportdlg.h
@@ -39,9 +39,9 @@
 
 /**
   * This class is used to select the required user input to export
-  * a specified account to the popular TQIF format.
-  * It relies upon the TQIF file handling routines in MyMoneyQifProfile and
-  * MyMoneyQifWriter to do the actual writing of TQIF files.
+  * a specified account to the popular QIF format.
+  * It relies upon the QIF file handling routines in MyMoneyQifProfile and
+  * MyMoneyQifWriter to do the actual writing of QIF files.
   *
   * It uses the global KConfig object to read and write the application
   * settings.
@@ -50,7 +50,7 @@
   *
   * @author Felix Rodriguez, Michael Edwardes, Thomas Baumgart 2000-2003
   *
-  * @short A class to select user data required to export a specified account to the popular TQIF format.
+  * @short A class to select user data required to export a specified account to the popular QIF format.
   **/
 class KExportDlg : public KExportDlgDecl
 {
@@ -110,7 +110,7 @@ protected slots:
   void slotOkClicked();
 
   /**
-    * Called when the user needs to browse the filesystem for a TQIF file
+    * Called when the user needs to browse the filesystem for a QIF file
     */
   void slotBrowse();
 
diff --git a/kmymoney2/dialogs/kimportdlg.cpp b/kmymoney2/dialogs/kimportdlg.cpp
index e484711..65865a5 100644
--- a/kmymoney2/dialogs/kimportdlg.cpp
+++ b/kmymoney2/dialogs/kimportdlg.cpp
@@ -159,7 +159,7 @@ void KImportDlg::slotFileTextChanged(const TQString& text)
 
 void KImportDlg::slotNewProfile(void)
 {
-  MyMoneyQifProfileEditor* editor = new MyMoneyQifProfileEditor(true, this, "TQIF Profile Editor");
+  MyMoneyQifProfileEditor* editor = new MyMoneyQifProfileEditor(true, this, "QIF Profile Editor");
 
   if(editor->exec()) {
     m_profileComboBox->setCurrentText(editor->selectedProfile());
diff --git a/kmymoney2/dialogs/kimportdlg.h b/kmymoney2/dialogs/kimportdlg.h
index 9f95c2c..a2070fd 100644
--- a/kmymoney2/dialogs/kimportdlg.h
+++ b/kmymoney2/dialogs/kimportdlg.h
@@ -39,8 +39,8 @@
 
 /**
   * This class is used to import a qif file to an account.
-  * It relies upon the TQIF file handling routines in MyMoneyAccount to do
-  * the actual writing of TQIF files.
+  * It relies upon the QIF file handling routines in MyMoneyAccount to do
+  * the actual writing of QIF files.
   *
   * It uses the global KConfig object to read and write the application
   * settings.
@@ -74,7 +74,7 @@ public:
   const TQString profile(void) const { return m_profileComboBox->currentText(); };
 
 protected slots:
-  /** Called to let the user browse for a TQIF file to import from. */
+  /** Called to let the user browse for a QIF file to import from. */
   void slotBrowse();
 
   /** Test whether to enable the buttons */
diff --git a/kmymoney2/dialogs/mymoneyqifprofileeditor.cpp b/kmymoney2/dialogs/mymoneyqifprofileeditor.cpp
index 7cb1f1b..d187ce0 100644
--- a/kmymoney2/dialogs/mymoneyqifprofileeditor.cpp
+++ b/kmymoney2/dialogs/mymoneyqifprofileeditor.cpp
@@ -94,7 +94,7 @@ MyMoneyQifProfileEditor::MyMoneyQifProfileEditor(const bool edit, TQWidget *pare
   KGuiItem newButtenItem( i18n( "&New" ),
                       TQIconSet(il->loadIcon("filenew", KIcon::Small, KIcon::SizeSmall)),
                       i18n("Create a new profile"),
-                      i18n("Use this to create a new TQIF import/export profile"));
+                      i18n("Use this to create a new QIF import/export profile"));
   m_newButton->setGuiItem(newButtenItem);
 
   connect(m_profileListBox, TQT_SIGNAL(highlighted(const TQString&)), this, TQT_SLOT(slotLoadProfileFromConfig(const TQString&)));
@@ -145,9 +145,9 @@ MyMoneyQifProfileEditor::~MyMoneyQifProfileEditor()
 void MyMoneyQifProfileEditor::loadWidgets(void)
 {
   if(m_inEdit)
-    setCaption(i18n("TQIF Profile Editor"));
+    setCaption(i18n("QIF Profile Editor"));
   else
-    setCaption(i18n("TQIF Profile Selector"));
+    setCaption(i18n("QIF Profile Selector"));
 
   m_editDateFormat->clear();
   m_editDateFormat->insertItem( "%d/%m/%yy" );
@@ -233,7 +233,7 @@ void MyMoneyQifProfileEditor::loadProfileListFromConfig(void)
 
   if(list.count() == 0) {
     m_profile.clear();
-    m_profile.setProfileDescription(i18n("The default TQIF profile"));
+    m_profile.setProfileDescription(i18n("The default QIF profile"));
     addProfile("Default");
 
     config->setGroup("Profiles");
@@ -400,7 +400,7 @@ const TQString MyMoneyQifProfileEditor::enterName(bool& ok)
 {
   MyMoneyQifProfileNameValidator val(TQT_TQOBJECT(this), "Validator");
 #if KDE_IS_VERSION(3,2,0)
-  return KInputDialog::getText(i18n("TQIF Profile Editor"),
+  return KInputDialog::getText(i18n("QIF Profile Editor"),
                                i18n("Enter new profile name"),
                                TQString(),
                                &ok,
diff --git a/kmymoney2/dialogs/mymoneyqifprofileeditor.h b/kmymoney2/dialogs/mymoneyqifprofileeditor.h
index 81b2905..7ea69d0 100644
--- a/kmymoney2/dialogs/mymoneyqifprofileeditor.h
+++ b/kmymoney2/dialogs/mymoneyqifprofileeditor.h
@@ -15,8 +15,8 @@
  *                                                                         *
  ***************************************************************************/
 
-#ifndef MYMONEYTQIFPROFILEEDITOR_H
-#define MYMONEYTQIFPROFILEEDITOR_H
+#ifndef MYMONEYQIFPROFILEEDITOR_H
+#define MYMONEYQIFPROFILEEDITOR_H
 
 // ----------------------------------------------------------------------------
 // QT Includes
diff --git a/kmymoney2/dialogs/transactionmatcher.cpp b/kmymoney2/dialogs/transactionmatcher.cpp
index ce1c16e..c4a21da 100644
--- a/kmymoney2/dialogs/transactionmatcher.cpp
+++ b/kmymoney2/dialogs/transactionmatcher.cpp
@@ -84,7 +84,7 @@ void TransactionMatcher::match(MyMoneyTransaction tm, MyMoneySplit sm, MyMoneyTr
   }
 
   // ipwizard: I took over the code to keep the bank id found in the endMatchTransaction
-  // This might not work for TQIF imports as they don't setup this information. It sure
+  // This might not work for QIF imports as they don't setup this information. It sure
   // makes sense for OFX and HBCI.
   const TQString& bankID = si.bankID();
   if (!bankID.isEmpty()) {
diff --git a/kmymoney2/kmymoney2.cpp b/kmymoney2/kmymoney2.cpp
index b9edf6c..23927ca 100644
--- a/kmymoney2/kmymoney2.cpp
+++ b/kmymoney2/kmymoney2.cpp
@@ -316,13 +316,13 @@ void KMyMoney2App::initActions(void)
   new KAction(i18n("Open database..."), "",0,TQT_TQOBJECT(this), TQT_SLOT(slotOpenDatabase()),actionCollection(),"open_database");
   new KAction(i18n("Save as database..."), "",0,TQT_TQOBJECT(this), TQT_SLOT(slotSaveAsDatabase()),actionCollection(),"saveas_database");
   new KAction(i18n("Backup..."), "backup",0,TQT_TQOBJECT(this), TQT_SLOT(slotFileBackup()),actionCollection(),"file_backup");
-  new KAction(i18n("TQIF..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotQifImport()), actionCollection(), "file_import_qif");
+  new KAction(i18n("QIF..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotQifImport()), actionCollection(), "file_import_qif");
   new KAction(i18n("Gnucash..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotGncImport()), actionCollection(), "file_import_gnc");
   new KAction(i18n("Statement file..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotStatementImport()), actionCollection(), "file_import_statement");
 
   new KAction(i18n("Account Template..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotLoadAccountTemplates()), actionCollection(), "file_import_template");
   new KAction(i18n("Account Template..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotSaveAccountTemplates()), actionCollection(), "file_export_template");
-  new KAction(i18n("TQIF..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotQifExport()), actionCollection(), "file_export_qif");
+  new KAction(i18n("QIF..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotQifExport()), actionCollection(), "file_export_qif");
   new KAction(i18n("Personal Data..."), "personal_data", 0, TQT_TQOBJECT(this), TQT_SLOT(slotFileViewPersonal()), actionCollection(), "view_personal_data");
 
 #if KMM_DEBUG
@@ -387,7 +387,7 @@ void KMyMoney2App::initActions(void)
   // **************
   // The tools menu
   // **************
-  new KAction(i18n("TQIF Profile Editor..."), "edit", 0, TQT_TQOBJECT(this), TQT_SLOT(slotQifProfileEditor()), actionCollection(), "tools_qif_editor");
+  new KAction(i18n("QIF Profile Editor..."), "edit", 0, TQT_TQOBJECT(this), TQT_SLOT(slotQifProfileEditor()), actionCollection(), "tools_qif_editor");
   new KAction(i18n("Securities..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotSecurityEditor()), actionCollection(), "tools_security_editor");
   new KAction(i18n("Currencies..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotCurrencyDialog()), actionCollection(), "tools_currency_editor");
   new KAction(i18n("Prices..."), "", 0, TQT_TQOBJECT(this), TQT_SLOT(slotPriceDialog()), actionCollection(), "tools_price_editor");
@@ -918,7 +918,7 @@ bool KMyMoney2App::isImportableFile( const KURL& url )
     if ( MyMoneyStatement::isStatementFile( url.path() ) )
       result = true;
 
-  // Place code here to test for TQIF and other locally-supported formats
+  // Place code here to test for QIF and other locally-supported formats
   // (i.e. not a plugin). If you add them here, be sure to add it to
   // the webConnect function.
 
@@ -1559,7 +1559,7 @@ void KMyMoney2App::slotQifImportFinished(void)
     KMessageBox::informationList(this, i18n("The statements have been processed with the following results:"), d->m_statementResults, i18n("Statement stats"));
 
 #if 0
-    // fixme: re-enable the TQIF import menu options
+    // fixme: re-enable the QIF import menu options
     if(m_qifReader->finishImport()) {
       if(verifyImportedData(m_qifReader->account())) {
         // keep the new data set, destroy the backup copy
@@ -2104,7 +2104,7 @@ void KMyMoney2App::slotShowNextView(void)
 
 void KMyMoney2App::slotQifProfileEditor(void)
 {
-  MyMoneyQifProfileEditor* editor = new MyMoneyQifProfileEditor(true, this, "TQIF Profile Editor");
+  MyMoneyQifProfileEditor* editor = new MyMoneyQifProfileEditor(true, this, "QIF Profile Editor");
 
 
   editor->exec();
diff --git a/kmymoney2/kmymoney2.h b/kmymoney2/kmymoney2.h
index ebf7b80..8062bdc 100644
--- a/kmymoney2/kmymoney2.h
+++ b/kmymoney2/kmymoney2.h
@@ -150,7 +150,7 @@ protected slots:
   void slotQifImport(void);
 
   /**
-    * Called when a TQIF import is finished.
+    * Called when a QIF import is finished.
     */
   void slotQifImportFinished(void);
 
@@ -180,7 +180,7 @@ protected slots:
 
   /**
     * Called when the user wishes to export some transaction to a
-    * TQIF formatted file. An account must be open for this to work.
+    * QIF formatted file. An account must be open for this to work.
     * Uses MyMoneyQifWriter() for the actual output.
     */
   void slotQifExport(void);
diff --git a/kmymoney2/views/kmymoneyview.h b/kmymoney2/views/kmymoneyview.h
index d1521f1..b023007 100644
--- a/kmymoney2/views/kmymoneyview.h
+++ b/kmymoney2/views/kmymoneyview.h
@@ -446,7 +446,7 @@ public slots:
     *
     * @see KListSettingsDlg
     * Refreshs all views. Used e.g. after settings have been changed or
-    * data has been loaded from external sources (TQIF import).
+    * data has been loaded from external sources (QIF import).
     **/
   void slotRefreshViews();