You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
kmymoney/libkdchart/KDChart.cpp

492 lines
19 KiB

/* -*- Mode: C++ -*-
KDChart - a multi-platform charting engine
*/
/****************************************************************************
** Copyright (C) 2001-2003 Klarälvdalens Datakonsult AB. All rights reserved.
**
** This file is part of the KDChart library.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** Licensees holding valid commercial KDChart licenses may use this file in
** accordance with the KDChart Commercial License Agreement provided with
** the Software.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.klaralvdalens-datakonsult.se/?page=products for
** information about KDChart Commercial License Agreements.
**
** Contact info@klaralvdalens-datakonsult.se if any conditions of this
** licensing are not clear to you.
**
**********************************************************************/
#if defined KDAB_EVAL
#include "../evaldialog/evaldialog.h"
#endif
/**
\dontinclude KDChartPainter.h
*/
#include <KDChart.h>
#include <KDChartPainter.h>
#include <KDChartParams.h>
#include <KDChartGlobal.h>
#include <KDChartAxisParams.h>
#include <tqglobal.h>
#include <tqpainter.h>
#include <tqpaintdevice.h>
#include <tqpaintdevicemetrics.h>
#ifdef TQSA
#if 0 // Disabled by ingwa to make it compile
#include <tqsinterpreter.h>
#include "KDChartWrapperFactory.h"
#include "KDChartObjectFactory.h"
#endif
#endif
/**
\class KDChart KDChart.h
\brief Provides a single entry-point to the charting engine for
applications that wish to provide their own TQPainter.
It is not useful to instantiate this class as it tqcontains
static methods only.
\note If for some reason you are NOT using the
KDChartWidget class but calling the painting methods of KDChart directly,
you probably will also use the KDChartDataRegionList class:
This class is derived from TQPtrList, so all of the TQt documentation
for this class is valid for KDChartDataRegionList too, e.g. freeing
of the pointers stored can either be done automatically or
manually - so PLEASE take the time to read the reference information for this class!
\sa KDChartWidget, KDChartDataRegionList
*/
KDChartParams* KDChart::oldParams = 0;
KDChartPainter* KDChart::cpainter = 0;
KDChartPainter* KDChart::cpainter2 = 0;
KDChartParams::ChartType KDChart::cpainterType = KDChartParams::NoType;
KDChartParams::ChartType KDChart::cpainterType2 = KDChartParams::NoType;
/**
A global function that cleans up possible KDChartPainter objects at
application shutdown.
*/
void cleanupPainter();
bool hasCartesianAxes( KDChartParams::ChartType chartType )
{
switch( chartType ){
case KDChartParams::NoType: return false;
case KDChartParams::Bar: return true;
case KDChartParams::Line: return true;
case KDChartParams::Area: return true;
case KDChartParams::Pie: return false;
case KDChartParams::HiLo: return true;
case KDChartParams::Ring: return false;
case KDChartParams::Polar: return false; // Polar axes are NO cartesian axes!
case KDChartParams::BoxWhisker: return true;
default:
qDebug("\n\n\n\nKDCHART ERROR: Type missing in KDChart.cpp hasCartesianAxes()\n"
"=============================================================\n"
"=============================================================\n\n\n\n");
}
return false;
}
/**
Calculates the drawing area from a given TQPainter.
Use this function to get a TQRect that you may pass to
KDChart::setupGeometry() if you need to know the positions and
sizes of the axis areas and/or the data area *before* drawing
the chart. After calling KDChart::setupGeometry() you may use
KDChartParams::axisArea() and/or KDChartParams::dataArea()
to retrieve the desired information.
\return True if the painter was valid and the drawing area
could be calculated successfully, else false.
*/
bool KDChart::painterToDrawRect( TQPainter* painter, TQRect& drawRect )
{
if( painter ){
TQPaintDeviceMetrics painterMetrics( painter->device() );
drawRect = TQRect( 0, 0, painterMetrics.width(), painterMetrics.height() );
drawRect.setWidth( drawRect.width() -2 );
drawRect.setHeight( drawRect.height()-2 );
return true;
}else{
drawRect = TQRect( TQPoint(0,0), TQSize(0,0) );
qDebug("ERROR: KDChartPainter::painterToDrawRect() was called with *no* painter.");
return false;
}
}
/**
Calculates the axis and data area rects of a chart with the
specified parameters on the specified painter.
\note Call this function if you need to know the positions and
sizes of the axis areas and/or the data area *before* drawing
the chart. After calling this function you may use
KDChartParams::axisArea() and/or KDChartParams::dataArea()
to retrieve the desired information.
To get the right drawing area from a given TQPainter please
use the static method KDChart::painterToDrawRect().
\param painter the painter that is eventually to be used for drawing
\param params the parameters defining the chart
\param data the data that should be displayed as a chart
\param drawRect the position and size of the drawing area to be used
*/
bool KDChart::setupGeometry( TQPainter* painter,
KDChartParams* params,
KDChartTableDataBase* data,
const TQRect& drawRect )
{
//qDebug("INVOKING: KDChart::setupGeometry()");
if( !params ){
qDebug("ERROR: setupGeometry::paint() was called with *no* params.");
return false;
}
if( !data ){
qDebug("ERROR: setupGeometry::paint() was called with *no* data.");
return false;
}
// don't crash due to memory problems when running on windows
#ifdef TQ_WS_WIN
TQPixmap::setDefaultOptimization(TQPixmap::MemoryOptim);
#endif
// Install a cleanup routine that is called when the TQt
// application shuts down and cleans up any potentially still
// existing painters. Only do this once.
static bool bFirstCleanUpInstall = true;
if( bFirstCleanUpInstall ) {
bFirstCleanUpInstall = false;
qAddPostRoutine( cleanupPainter );
}
// Check whether last call of this methode gave us the same params pointer.
// If params changed we must create new painter(s).
bool paramsHasChanged = ( params != oldParams );
if( paramsHasChanged )
oldParams = params;
// Check whether there already is painter and, if that is the
// case, whether the painter still has the correct type (the chart
// type might have changed in the meantime).
if ( paramsHasChanged || !cpainter || cpainterType != params->chartType() )
{
delete cpainter; /* save, since always 0 if there was not yet
a chart painter */
// create a new painter
cpainter = KDChartPainter::create( params, false );
cpainterType = params->chartType();
}
// Check whether there already is a 2nd painter and, if that is the
// case, whether the painter still has the correct type (the
// additional chart type might have changed in the meantime).
if ( paramsHasChanged || !cpainter2 || cpainterType2 != params->additionalChartType() )
{
delete cpainter2; /* save, since always 0 if there was not yet
a chart painter */
// create a new painter
if( hasCartesianAxes( params->chartType() )
&& hasCartesianAxes( params->additionalChartType() ) ){
cpainter2 = KDChartPainter::create( params, true );
cpainterType2 = params->additionalChartType();
}else{
cpainter2 = 0;
cpainterType2 = KDChartParams::NoType;
}
}
if ( cpainter ){ // can be 0 if no exceptions are used
cpainter->setupGeometry( painter, data, drawRect );
}
if ( cpainter2 ){ // can be 0 if no exceptions are used
cpainter2->setupGeometry( painter, data, drawRect );
}
return true;
}
/**
Paints a chart with the specified parameters on the specified
painter.
\note If you are passing \c regions pointer, KD Chart will call
the \c clear() method on it, to delete any regions that might
still be registered from previous painting.
Make sure to copy any regions information into your own, private
data structure, in case you need to keep track of region information,
that was valid for such previous times.
\param painter the TQPainter onto which the chart should be painted
\param params the parameters defining the chart
\param data the data that should be displayed as a chart
\param regions if not null, this points to a
KDChartDataRegionList that will be filled with the regions
of the data segments. This information is needed internally for both
recognizing the data segment when reporting mouse clicks and
for finding the correct position to draw the respective data value texts.
\param rect the position and size of the drawing area to be used,
if this parameter is zero the painter's device metrics will be used.
\param mustCalculateGeometry may be set to false if paint() is called
immediately after a previous call of setupGeometry() to save some
time in case you have specified a lot of data cells.
*/
void KDChart::paint( TQPainter* painter,
KDChartParams* paraParams,
KDChartTableDataBase* paraData,
KDChartDataRegionList* regions,
const TQRect* rect,
bool mustCalculateGeometry )
{
//qDebug("KDChart::paint() mustCalculateGeometry: "+TQString(mustCalculateGeometry?"TRUE":"FALSE") );
#if defined KDAB_EVAL
EvalDialog::checkEvalLicense( "KD Chart" );
#endif
// delete old contents, to avoid the region from constantly growing
if( regions )
regions->clear();
KDChartParams* params = paraParams;
KDChartTableDataBase* data = paraData;
if( !paraParams && !paraData ){
qDebug("-----");
qDebug("Note: KDChart::paint() was called without \"params\" and without \"data\".");
qDebug("----- Showing a default bar chart.");
params = new KDChartParams();
params->setDatasetGap(3 * params->valueBlockGap());
params->setPrintDataValues( false );
params->setLegendPosition( KDChartParams::NoLegend );
params->setAxisLabelsVisible( KDChartAxisParams::AxisPosBottom, false );
params->setAxisShowGrid( KDChartAxisParams::AxisPosBottom, false );
params->setHeader1Text( "KDChartWidget" );
data = new KDChartTableData( 3, 1 );
// 1st series
data->setCell( 0, 0, 12.5 );
// 2nd series
data->setCell( 1, 0, 8.0 );
// 3rd series
data->setCell( 2, 0, 15.0 );
}
TQRect drawRect;
bool bOk = true;
if( mustCalculateGeometry || !cpainter || cpainter->outermostRect().isNull() ){
if( rect )
drawRect = *rect;
else if( !painterToDrawRect( painter, drawRect ) ){
qDebug("ERROR: KDChart::paint() could not calculate a drawing area.");
bOk = false;
}
//qDebug("xxx" );
if( (params || data) && !setupGeometry( painter, params, data, drawRect ) ){
qDebug("ERROR: KDChart::paint() could not calculate the chart tqgeometry.");
bOk = false;
}
}else{
drawRect = cpainter->outermostRect();
}
//qDebug("yyy" );
if( bOk ){
// Note: the following *must* paint the main-chart first
// and the additional chart afterwards
// since all axes computations are only done when
// the first chart is painted but will be needed for both of course.
//
bool paintFirst = true;
bool paintLast = ! ( cpainter && cpainter2 );
if ( cpainter ) { // can be 0 if no exceptions are used
//qDebug("zzz" );
cpainter->paint( painter, data, paintFirst, paintLast, regions, &drawRect, false );
paintFirst = false;
}
paintLast = true;
if ( cpainter2 ) // can be 0 if no exceptions are used
cpainter2->paint( painter, data, paintFirst, paintLast, regions, &drawRect, false );
}
if( !paraParams && !paraData ){
delete params;
delete data;
}
KDChartAutoColor::freeInstance(); // stuff that memory leak
}
/**
Paints a chart with the specified parameters on the specified
painter which should use a TQPrinter as it's output device.
This method is provided for your convenience, it behaves
like the paint() method described above but additionally
it takes care for the output mode flag: Before painting is
started the internal optimizeOutputForScreen flag is set
to FALSE and after painting is done it is restored to
it's previous value.
\sa paint
*/
void KDChart::print( TQPainter* painter, KDChartParams* params,
KDChartTableDataBase* data,
KDChartDataRegionList* regions,
const TQRect* rect,
bool mustCalculateGeometry )
{
bool oldOpt=true;
if( params ){
oldOpt = params->optimizeOutputForScreen();
params->setOptimizeOutputForScreen( false );
}
paint( painter, params, data, regions, rect, mustCalculateGeometry );
if( params )
params->setOptimizeOutputForScreen( oldOpt );
}
/*
This method is called at application shut-down and cleans up the
last created painter.
*/
void cleanupPainter()
{
delete KDChart::cpainter;
delete KDChart::cpainter2;
KDChart::oldParams = 0;
}
#ifdef TQSA
void KDChart::initInterpreter( TQSInterpreter* interpreter )
{
privateInitInterpreter( interpreter );
interpreter->evaluate( globals() );
}
void KDChart::initProject( TQSProject* project )
{
project->createScript( TQString::tqfromLatin1( "KDCHART_Globals" ), globals() );
privateInitInterpreter( project->interpreter() );
}
TQString KDChart::globals()
{
TQString globals;
TQMap<char*, double> intMap;
intMap.insert( "KDCHART_POS_INFINITE", KDCHART_POS_INFINITE );
intMap.insert( "KDCHART_NEG_INFINITE", KDCHART_NEG_INFINITE );
intMap.insert( "KDCHART_AlignAuto", KDCHART_AlignAuto );
intMap.insert( "KDCHART_ALL_AXES", KDCHART_ALL_AXES );
intMap.insert( "KDCHART_NO_AXIS", KDCHART_NO_AXIS );
intMap.insert( "KDCHART_ALL_DATASETS", KDCHART_ALL_DATASETS );
intMap.insert( "KDCHART_NO_DATASET", KDCHART_NO_DATASET );
intMap.insert( "KDCHART_UNKNOWN_CHART", KDCHART_UNKNOWN_CHART );
intMap.insert( "KDCHART_ALL_CHARTS", KDCHART_ALL_CHARTS );
intMap.insert( "KDCHART_NO_CHART", KDCHART_NO_CHART );
intMap.insert( "KDCHART_GLOBAL_LINE_STYLE", KDCHART_GLOBAL_LINE_STYLE );
intMap.insert( "KDCHART_AUTO_SIZE", KDCHART_AUTO_SIZE );
intMap.insert( "KDCHART_DATA_VALUE_AUTO_DIGITS", KDCHART_DATA_VALUE_AUTO_DIGITS );
intMap.insert( "KDCHART_SAGITTAL_ROTATION", KDCHART_SAGITTAL_ROTATION );
intMap.insert( "KDCHART_TANGENTIAL_ROTATION", KDCHART_TANGENTIAL_ROTATION );
intMap.insert( "KDCHART_PROPSET_NORMAL_DATA", KDCHART_PROPSET_NORMAL_DATA );
intMap.insert( "KDCHART_PROPSET_TRANSPARENT_DATA", KDCHART_PROPSET_TRANSPARENT_DATA );
intMap.insert( "KDCHART_PROPSET_HORI_LINE", KDCHART_PROPSET_HORI_LINE );
intMap.insert( "KDCHART_PROPSET_VERT_LINE", KDCHART_PROPSET_VERT_LINE );
intMap.insert( "KDCHART_SAGGITAL_ROTATION", KDCHART_SAGGITAL_ROTATION );
intMap.insert( "KDCHART_CNT_ORDINATES", KDCHART_CNT_ORDINATES );
intMap.insert( "KDCHART_MAX_POLAR_DELIMS_AND_LABELS_POS", KDCHART_MAX_POLAR_DELIMS_AND_LABELS_POS );
intMap.insert( "KDCHART_MAX_AXES", KDCHART_MAX_AXES );
intMap.insert( "KDCHART_AXIS_LABELS_AUTO_DELTA", KDCHART_AXIS_LABELS_AUTO_DELTA );
intMap.insert( "KDCHART_AXIS_LABELS_AUTO_LEAVEOUT", KDCHART_AXIS_LABELS_AUTO_LEAVEOUT );
intMap.insert( "KDCHART_AXIS_LABELS_AUTO_DIGITS", KDCHART_AXIS_LABELS_AUTO_DIGITS );
intMap.insert( "KDCHART_AXIS_GRID_AUTO_LINEWIDTH", KDCHART_AXIS_GRID_AUTO_LINEWIDTH );
intMap.insert( "KDCHART_AXIS_IGNORE_EMPTY_INNER_SPAN", KDCHART_AXIS_IGNORE_EMPTY_INNER_SPAN );
intMap.insert( "KDCHART_DONT_CHANGE_EMPTY_INNER_SPAN_NOW", KDCHART_DONT_CHANGE_EMPTY_INNER_SPAN_NOW );
intMap.insert( "DBL_MIN", DBL_MIN );
intMap.insert( "DBL_MAX", DBL_MAX );
for( TQMapIterator<char*,double> it= intMap.begin(); it != intMap.end(); ++it ) {
// This is written this way to be efficient
globals += TQString::tqfromLatin1( "const " );
globals += it.key();
globals += " = ";
globals += TQString::number( it.data() );
globals += ";\n";
}
globals += TQString::tqfromLatin1( "const KDCHART_AXIS_LABELS_AUTO_DATETIME_FORMAT=\"%1\";\n" )
.tqarg( TQString::tqfromLatin1( KDCHART_AXIS_LABELS_AUTO_DATETIME_FORMAT ) );
globals += TQString::tqfromLatin1( "const KDCHART_AXIS_LABELS_AUTO_LIMIT = 140319.64;\n" );
globals += TQString::tqfromLatin1( "const KDCHART_DEFAULT_AXIS_GRID_COLOR = new Color(\"%1\");\n" )
.tqarg(KDCHART_DEFAULT_AXIS_GRID_COLOR.name());
globals += TQString::tqfromLatin1( "const KDCHART_DATA_VALUE_AUTO_COLOR = new Color(\"%1\");\n" )
.tqarg( (KDCHART_DATA_VALUE_AUTO_COLOR)->name());
TQMap<char*,TQColor> colorMap;
colorMap.insert( "TQt.color0", TQt::color0 );
colorMap.insert( "TQt.color1", TQt::color1 );
colorMap.insert( "TQt.black", TQt::black );
colorMap.insert( "TQt.white", TQt::white );
colorMap.insert( "TQt.darkGray", TQt::darkGray );
colorMap.insert( "TQt.gray", TQt::gray );
colorMap.insert( "TQt.lightGray", TQt::lightGray );
colorMap.insert( "TQt.red", TQt::red );
colorMap.insert( "TQt.green", TQt::green );
colorMap.insert( "TQt.blue", TQt::blue );
colorMap.insert( "TQt.cyan", TQt::cyan );
colorMap.insert( "TQt.magenta", TQt::magenta );
colorMap.insert( "TQt.yellow", TQt::yellow );
colorMap.insert( "TQt.darkRed", TQt::darkRed );
colorMap.insert( "TQt.darkGreen", TQt::darkGreen );
colorMap.insert( "TQt.darkBlue", TQt::darkBlue );
colorMap.insert( "TQt.darkCyan", TQt::darkCyan );
colorMap.insert( "TQt.darkMagenta", TQt::darkMagenta );
colorMap.insert( "TQt.darkYellow", TQt::darkYellow );
for( TQMapIterator<char*,TQColor> it2= colorMap.begin(); it2 != colorMap.end(); ++it2 ) {
// This is written this way to be efficient
globals += TQString::tqfromLatin1( it2.key() );
globals += TQString::tqfromLatin1( " = new Color( " );
globals += TQString::number( it2.data().red() );
globals += ',';
globals += TQString::number( it2.data().green() );
globals += ',';
globals += TQString::number( it2.data().blue() );
globals += TQString::tqfromLatin1( " );\n" );
}
//qDebug( "%s",globals.latin1() );
return globals;
}
void KDChart::privateInitInterpreter( TQSInterpreter* interpreter )
{
interpreter->addWrapperFactory( new KDChartWrapperFactory );
interpreter->addObjectFactory ( new KDChartObjectFactory );
}
#endif