You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
klamav/configure.in

286 lines
8.8 KiB

dnl =======================================================
dnl FILE: ./admin/configure.in.min
dnl =======================================================
dnl This file is part of the KDE libraries/packages
dnl Copyright (C) 2001 Stephan Kulow (coolo@kde.org)
dnl This file is free software; you can redistribute it and/or
dnl modify it under the terms of the GNU Library General Public
dnl License as published by the Free Software Foundation; either
dnl version 2 of the License, or (at your option) any later version.
dnl This library is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
dnl Library General Public License for more details.
dnl You should have received a copy of the GNU Library General Public License
dnl along with this library; see the file COPYING.LIB. If not, write to
dnl the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
dnl Boston, MA 02110-1301, USA.
# Original Author was Kalle@kde.org
# I lifted it in some mater. (Stephan Kulow)
# I used much code from Janos Farkas
dnl Process this file with autoconf to produce a configure script.
AC_INIT(acinclude.m4) dnl a source file from your sub dir
dnl This is so we can use kde-common
AC_CONFIG_AUX_DIR(admin)
dnl This ksh/zsh feature conflicts with `cd blah ; pwd`
unset CDPATH
dnl Checking host/target/build systems, for make, install etc.
AC_CANONICAL_SYSTEM
dnl Perform program name transformation
AC_ARG_PROGRAM
dnl Automake doc recommends to do this only here. (Janos)
AM_INIT_AUTOMAKE(klamav, 0.1) dnl searches for some needed programs
KDE_SET_PREFIX
dnl generate the config header
AM_CONFIG_HEADER(config.h) dnl at the distribution this done
dnl Checks for programs.
AC_CHECK_COMPILERS
AC_ENABLE_SHARED(yes)
AC_ENABLE_STATIC(no)
KDE_PROG_LIBTOOL
dnl for NLS support. Call them in this order!
dnl WITH_NLS is for the po files
AM_KDE_WITH_NLS
KDE_USE_QT(3.3.5)
AC_PATH_KDE
dnl =======================================================
dnl FILE: configure.in.in
dnl =======================================================
#MIN_CONFIG(3.3.5)
dnl PACKAGE set before
AC_C_BIGENDIAN
AC_CHECK_KDEMAXPATHLEN
###############################################################################
# BEGIN PKG-CONFIG CHECK
###############################################################################
AC_ARG_VAR(PKGCONFIGFOUND, [Path to pkg-config])
AC_CHECK_PROG(PKGCONFIGFOUND, pkg-config, [yes])
###############################################################################
# END PKG-CONFIG CHECK
###############################################################################
###############################################################################
# BEGIN SQLITE CHECK
###############################################################################
LIB_SQLITE=""
AC_ARG_WITH(included-sqlite,
AC_HELP_STRING([--without-included-sqlite],[build KlamAV using system sqlite library]),
[included_sqlite=$withval],
[included_sqlite=yes]
)
if test x$included_sqlite = xno; then
if test x$PKGCONFIGFOUND = xyes; then
PKG_CHECK_MODULES(SQLITE, sqlite3 >= 3.0, have_sqlite=yes,have_sqlite=no)
if test x$have_sqlite = xyes; then
LIB_SQLITE=`pkg-config --libs sqlite3`
else
AC_MSG_ERROR(Can't find sqlite database library. Check your installation of sqlite or use included sqlite.)
fi
fi
fi
AC_SUBST(LIB_SQLITE)
AM_CONDITIONAL(with_included_sqlite, [test x$included_sqlite = xyes])
# Determine pointer size for sqlite
KDE_CHECK_TYPES
AC_DEFINE(SQLITE_PTR_SZ, SIZEOF_CHAR_P, [Determine pointer size for SQLite])
###############################################################################
# END SQLITE CHECK
###############################################################################
# ---- Taken from KOffice ----------------------
# --- Check for KDE 3.2 or 3.3 or 3.4 or 3.5 ---
AC_MSG_CHECKING([for KDE version])
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
kdeversion_save_CXXFLAGS="$CXXFLAGS"
kdeversion_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
CXXFLAGS="$CXXFLAGS $all_includes"
AC_COMPILE_IFELSE([
#include <kdeversion.h>
#if ! ( KDE_IS_VERSION( 3, 2, 90 ) )
#error KDE 3.2
#endif
],
need_kde32_compat="no"
,
need_kde32_compat="yes"
)
AC_COMPILE_IFELSE([
#include <kdeversion.h>
#if ! ( KDE_IS_VERSION( 3, 3, 90 ) )
#error KDE 3.3
#endif
],
need_kde33_compat="no"
,
need_kde33_compat="yes"
)
AC_COMPILE_IFELSE([
#include <kdeversion.h>
#if ! ( KDE_IS_VERSION( 3, 4, 90 ) )
#error KDE 3.4
#endif
],
need_kde34_compat="no"
,
need_kde34_compat="yes"
)
AC_COMPILE_IFELSE([
#include <kdeversion.h>
#if ! ( KDE_IS_VERSION( 3, 5, 2 ) )
#error KDE 3.5.x (x < 2)
#endif
],
need_kde351_compat="no"
,
need_kde351_compat="yes"
)
CXXFLAGS="$kdeversion_save_CXXFLAGS"
LIBS="$kdeversion_safe_LIBS"
AC_LANG_RESTORE
if test "$need_kde32_compat" = "yes"; then
AC_MSG_ERROR([You have KDE 3.2.x. KlamAV needs KDE 3.5.2 or greater.])
else
if test "$need_kde33_compat" = "yes"; then
AC_MSG_ERROR([You have KDE 3.3.x KlamAV needs KDE 3.5.2 or greater.])
else
if test "$need_kde34_compat" = "yes"; then
AC_MSG_ERROR([You have KDE 3.4.x KlamAV needs KDE 3.5.2 or greater.])
else
if test "$need_kde351_compat" = "yes"; then
AC_MSG_ERROR([You have KDE 3.5.1. KlamAV needs KDE 3.5.2 or greater.])
else
AC_MSG_RESULT([KDE 3.5.x (x >=2) or SVN trunk])
fi
fi
fi
fi
# --- End KDE 3.2 check ---
AC_CHECK_LIB(clamav, cl_scanfile, [LIB_CLAM=" -lclamav";],AC_MSG_ERROR(Can't find ClamAV's libraries. Please check your installation of ClamAV.))
AC_SUBST(LIB_CLAM)
AC_CHECK_LIB(clamav, cl_free, [ tempres="no" ],tempres="yes")
if test "$tempres" = "yes"; then
AC_DEFINE([SUPPORT_CLAMAV_V095],[],[Support ClamAV 0.95])
fi
dnl disable updates
# Whether we should use the disableupdates memory allocation debugging library.
AC_MSG_CHECKING(whether to use disable-updates (build KlamAV with GUI updates disabled ))
AC_ARG_WITH(disableupdates,
[ --with-disableupdates build KlamAV with GUI updates disabled . ],
[if [[ "$withval" = "yes" ]]; then
disableupdates=1
AC_MSG_RESULT(yes)
else
disableupdates=1
AC_MSG_RESULT(no)
fi], [ disableupdates=0; AC_MSG_RESULT(no) ]
)
if [[ $disableupdates -eq 1 ]]; then
AC_DEFINE(DISABLE_UPDATES, 1, "Define to disable gui updates")
fi
KDE_CREATE_SUBDIRSLIST
AC_CONFIG_FILES([ Makefile ])
AC_CONFIG_FILES([ doc/Makefile ])
AC_CONFIG_FILES([ doc/en/Makefile ])
AC_CONFIG_FILES([ po/Makefile ])
AC_CONFIG_FILES([ src/Makefile ])
AC_CONFIG_FILES([ src/about/Makefile ])
AC_CONFIG_FILES([ src/action/Makefile ])
AC_CONFIG_FILES([ src/arkollon/Makefile ])
AC_CONFIG_FILES([ src/icons/Makefile ])
AC_CONFIG_FILES([ src/klammail/Makefile ])
AC_CONFIG_FILES([ src/sqlite/Makefile ])
AC_OUTPUT
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
echo ""
echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
echo "was not included. Therefore, GCC symbol visibility support remains disabled."
echo ""
echo "For better performance, consider including the Qt visibility supporting patch"
echo "located at:"
echo ""
echo "http://bugs.kde.org/show_bug.cgi?id=109386"
echo ""
echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
echo "everything will continue to work just fine without it."
echo ""
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi