#!/bin/sh
# Generated by Alien's SlackBuild Toolkit: http://slackware.com/~alien/AST
# Copyright 2009, 2010, 2011, 2012, 2013, 2014, 2015  Eric Hameleers, Eindhoven, Netherlands
# Copyright 2015-2017  Thorn Inurcide
# Copyright 2015-2017  tde-slackbuilds project on GitHub
# All rights reserved.
#
#   Permission to use, copy, modify, and distribute this software for
#   any purpose with or without fee is hereby granted, provided that
#   the above copyright notice and this permission notice appear in all
#   copies.
#
#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
#   WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
#   IN NO EVENT SHALL THE AUTHORS AND COPYRIGHT HOLDERS AND THEIR
#   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
#   USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
#   ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
#   OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
#   OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#   SUCH DAMAGE.

PRGNAM=inkscape
VERSION=1.2.1
BUILD=${BUILD:-1}

ARCHIVE_TYPE="tar.xz"
SRCURL="https://media.inkscape.org/dl/resources/file/$PRGNAM-$VERSION.$ARCHIVE_TYPE"

source ../../get-source.sh
## need this here for CXX_FLAGS for double-conversion
getsource_fn

## inkscape needs double-conversion
[[ $(cat $TMPVARS/PRE_DOWNLOAD) != yes ]] && {
# ### double-conversion  - start
{
## If it is already installed, go to end
pkg-config double-conversion || ldconfig -p|grep libdouble-conversion 1>/dev/null || { # ldconfig if no .pc file
## otherwise, if the source archive is in 'src' ..
[[ -s $BUILD_TDE_ROOT/src/v3.2.0.tar.gz ]] && {
## .. build, package, and install ..
(
echo -e "\n building double-conversion \n"

cd /$TMP_BUILD
rm -rf *double-conversion*
tar xf $BUILD_TDE_ROOT/src/v3.2.0.tar.gz
cd double-conversion-3.2.0/

## add a pkg-config .pc file
echo 'prefix=@CMAKE_INSTALL_PREFIX@
exec_prefix=${prefix}
libdir=${prefix}/@CMAKE_INSTALL_LIBDIR@
includedir=${prefix}/@CMAKE_INSTALL_INCLUDEDIR@

Name: Double conversion
Description: Provides binary-decimal and decimal-binary routines for IEEE doubles
Version: @PROJECT_VERSION@

Requires:
Libs: -L${libdir} -l@PROJECT_NAME@
Cflags: -I${includedir}/@PROJECT_NAME@
' > double-conversion.pc.in
#
patch -p0 << EOF
--- CMakeLists.txt
+++ CMakeLists.txt
@@ -118,0 +119,4 @@
+
+configure_file( \${CMAKE_CURRENT_SOURCE_DIR}/\${PROJECT_NAME}.pc.in
+                \${CMAKE_CURRENT_BINARY_DIR}/\${PROJECT_NAME}.pc @ONLY IMMEDIATE )
+install(FILES "\${CMAKE_CURRENT_BINARY_DIR}/\${PROJECT_NAME}.pc" DESTINATION \${CMAKE_INSTALL_LIBDIR}/pkgconfig)
EOF

cd cmake/
# LIBDIRSUFFIX not required - builds to lib64 where appropriate ..
cmake ${G_NINJA:-} \
    -DBUILD_SHARED_LIBS=ON \
    -DBUILD_TESTING=OFF \
    -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
    -DCMAKE_CXX_COMPILER=$COMPILER_CXX \
    ..

PKG=$TMP_BUILD/package-double-conversion
make_fn

cd $TMP_BUILD/package-double-conversion
makepkg -l y -c n $OUTPUT/double-conversion-3.2.0-$ARCH-$BUILD.txz
installpkg $OUTPUT/double-conversion-3.2.0-$ARCH-$BUILD.txz
)
echo -e "\n now building inkscape \n"
} || { ## .. but if the source archive isn't in 'src', display download URL ..
echo -e "
 ############

 double-conversion is required for building inkscape

 Download:
             \033[39;1m
( cd $BUILD_TDE_ROOT/src
  wget https://github.com/google/double-conversion/archive/v3.2.0.tar.gz )
             \033[0m
 and re-run this script ..

  ############
" ; exit 1 ; }
}
}
# ### double-conversion - end
}

untar_fn

## set internal 2geom lib paths to lib$LIBDIRSUFFIX
sed -i 's|set(CMAKE_INSTALL_RPATH.*$|set(CMAKE_INSTALL_RPATH $ORIGIN)|' src/3rdparty/2geom/CMakeLists.txt
sed -i "s|libdir=.*$|&$LIBDIRSUFFIX|" src/3rdparty/2geom/2geom.pc.in

## only build for required locales
{
## set up a directory to store the required locale files temporarily
TEMP_DIR=$TMP_BUILD/tmp-$PRGNAM/loc_tmp
mkdir $TEMP_DIR

## .. for po/LINGUAS
LOCALES=$(cat po/LINGUAS)
rm po/LINGUAS
for locale in $I18N
 do
 [[ $LOCALES == *$locale* ]] && \
 echo $locale >> po/LINGUAS
 done
## .. for translations
locas="" ## for slack-desc
for locale in $I18N
 do
 mv po/$locale.po $TEMP_DIR && locas="$locas $locale"
 done
rm -rf po/*.po
mv $TEMP_DIR/* po/

## .. for tutorials
for locale in $I18N
 do
 mv share/tutorials/*.$locale.* $TEMP_DIR
 done
rm share/tutorials/*.*.*
mv $TEMP_DIR/* share/tutorials/
} || true # because the existence of the files hasn't been tested

## only package man pages for required locales
for file in man/ink*.*.pod.in
do
 [[ $I18N != *$(echo $file | cut -d"." -f2)* ]] && rm $file
done
## and install them to $prefix, as per most other Slackware packages
sed -i 's|MANFILE_DEST "${SHARE_INSTALL}|MANFILE_DEST "${CMAKE_INSTALL_PREFIX}|' CMakeScripts/Pod2man.cmake

## only package welcome screen text for required locales
I18N_SVG="about.svg start-welcome-text.svg"
#
for Loc in $I18N
do
 [[ -s share/screens/start-welcome-text.$Loc.svg ]] && I18N_SVG="$I18N_SVG start-welcome-text.$Loc.svg" && COUNT_TEXT=$[${COUNT_TEXT:-}+1]
COUNT_I18N=$[${COUNT_I18N:-}+1]
done
## Add the TRANSLATING file if any of the locales has no start-welcome-text.$I18N.svg
[[ ${COUNT_I18N:-} != ${COUNT_TEXT:-} ]] && I18N_SVG="TRANSLATING $I18N_SVG"
sed -i "s|\"\*.svg\"|$I18N_SVG|" share/screens/CMakeLists.txt

listdocs_fn

chown_fn

cd_builddir_fn

## options have been pulled from CMakeLists.txt
cmake ${G_NINJA:-} \
    -DCMAKE_C_FLAGS="$SLKCFLAGS" \
    -DCMAKE_CXX_FLAGS="$SLKCFLAGS" \
    -DCMAKE_C_COMPILER=$COMPILER \
    -DCMAKE_CXX_COMPILER=$COMPILER_CXX \
    -DCMAKE_BUILD_TYPE=Release \
    -DCMAKE_INSTALL_PREFIX=/usr/local \
    -DBUILD_SHARED_LIBS="ON" \
    -DBUILD_TESTING="OFF" \
    -DENABLE_BINRELOC="OFF" \
    -DENABLE_LCMS="ON" \
    -DENABLE_POPPLER="ON" \
    -DENABLE_POPPLER_CAIRO="ON" \
    -DWITH_ASAN="OFF" \
    -DWITH_FUZZ="OFF" \
    -DWITH_GNU_READLINE="ON" \
    -DWITH_GRAPHICS_MAGICK="ON" \
    -DWITH_GSPELL="OFF" \
    -DWITH_IMAGE_MAGICK="ON" \
    -DWITH_INTERNAL_2GEOM="ON" \
    -DWITH_INTERNAL_CAIRO="OFF" \
    -DWITH_JEMALLOC="OFF" \
    -DWITH_LIBCDR="ON" \
    -DWITH_LIBVISIO="OFF" \
    -DWITH_LIBWPG="OFF" \
    -DWITH_LPETOOL="OFF" \
    -DLPE_ENABLE_TEST_EFFECTS="OFF" \
    -DWITH_MANPAGE_COMPRESSION="ON" \
    -DWITH_NLS="ON" \
    -DWITH_OPENMP="ON" \
    -DWITH_PROFILING="OFF" \
    -DWITH_SVG2="ON" \
    -DWITH_X11="ON" \
    -DENABLE_BINRELOC="OFF" \
    -Wno-dev \
    ..

make_fn

INSTALL_TDE="/usr/local"
installdocs_fn

strip_fn

mkdir_install_fn

INSTALL_TDE=/usr/local
doinst_sh_fn

echo "
# HOW TO EDIT THIS FILE:
# The 'handy ruler' below makes it easier to edit a package description.  Line
# up the first '|' above the ':' following the base package name, and the '|' on
# the right side marks the last column you can put a character in.  You must make
# exactly 11 lines for the formatting to be correct.  It's also customary to
# leave one space after the ':'.
       |-----handy-ruler------------------------------------------------------|
$PRGNAM: Inkscape (Open Source vector graphics editor)
$PRGNAM:
$PRGNAM: Inkscape is an Open Source vector graphics editor, with capabilities
$PRGNAM: similar to Illustrator, Freehand, CorelDraw, or Xara X using the W3C
$PRGNAM: standard Scalable Vector Graphics (SVG) file format.
$PRGNAM:
$PRGNAM: With language support for:
$PRGNAM: en$locas
$PRGNAM:
$PRGNAM:
$PRGNAM:
$PRGNAM:
" > $PKG/install/slack-desc

makepkg_fn